esp-idf/components/esp_hw_support/periph_ctrl.c

/*
 * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
 *
 * SPDX-License-Identifier: Apache-2.0
 */
#include "freertos/FreeRTOS.h"
#include "hal/clk_gate_ll.h"
#include "esp_attr.h"
#include "esp_private/periph_ctrl.h"
#include "soc/soc_caps.h"

#if SOC_MODEM_CLOCK_IS_INDEPENDENT
#include "esp_private/esp_modem_clock.h"
#endif

/// @brief For simplicity and backward compatible, we are using the same spin lock for both bus clock on/off and reset
/// @note  We may want to split them into two spin locks in the future
static portMUX_TYPE periph_spinlock = portMUX_INITIALIZER_UNLOCKED;

static uint8_t ref_counts[PERIPH_MODULE_MAX] = {0};

IRAM_ATTR void periph_rcc_enter(void)
{
    portENTER_CRITICAL_SAFE(&periph_spinlock);
}

IRAM_ATTR void periph_rcc_exit(void)
{
    portEXIT_CRITICAL_SAFE(&periph_spinlock);
}

uint8_t periph_rcc_acquire_enter(periph_module_t periph)
{
    periph_rcc_enter();
    return ref_counts[periph];
}

void periph_rcc_acquire_exit(periph_module_t periph, uint8_t ref_count)
{
    ref_counts[periph] = ++ref_count;
    periph_rcc_exit();
}

uint8_t periph_rcc_release_enter(periph_module_t periph)
{
    periph_rcc_enter();
    return ref_counts[periph] - 1;
}

void periph_rcc_release_exit(periph_module_t periph, uint8_t ref_count)
{
    ref_counts[periph] = ref_count;
    periph_rcc_exit();
}

void periph_module_enable(periph_module_t periph)
{
    assert(periph < PERIPH_MODULE_MAX);
    portENTER_CRITICAL_SAFE(&periph_spinlock);
    if (ref_counts[periph] == 0) {
        periph_ll_enable_clk_clear_rst(periph);
    }
    ref_counts[periph]++;
    portEXIT_CRITICAL_SAFE(&periph_spinlock);
}

void periph_module_disable(periph_module_t periph)
{
    assert(periph < PERIPH_MODULE_MAX);
    portENTER_CRITICAL_SAFE(&periph_spinlock);
    ref_counts[periph]--;
    if (ref_counts[periph] == 0) {
        periph_ll_disable_clk_set_rst(periph);
    }
    portEXIT_CRITICAL_SAFE(&periph_spinlock);
}

void periph_module_reset(periph_module_t periph)
{
    assert(periph < PERIPH_MODULE_MAX);
    portENTER_CRITICAL_SAFE(&periph_spinlock);
    periph_ll_reset(periph);
    portEXIT_CRITICAL_SAFE(&periph_spinlock);
}

#if !SOC_IEEE802154_BLE_ONLY
#if SOC_BT_SUPPORTED || SOC_WIFI_SUPPORTED
IRAM_ATTR void wifi_bt_common_module_enable(void)
{
#if SOC_MODEM_CLOCK_IS_INDEPENDENT
    modem_clock_module_enable(PERIPH_PHY_MODULE);
#else
    portENTER_CRITICAL_SAFE(&periph_spinlock);
    if (ref_counts[PERIPH_WIFI_BT_COMMON_MODULE] == 0) {
        periph_ll_wifi_bt_module_enable_clk_clear_rst();
    }
    ref_counts[PERIPH_WIFI_BT_COMMON_MODULE]++;
    portEXIT_CRITICAL_SAFE(&periph_spinlock);
#endif
}

IRAM_ATTR void wifi_bt_common_module_disable(void)
{
#if SOC_MODEM_CLOCK_IS_INDEPENDENT
    modem_clock_module_disable(PERIPH_PHY_MODULE);
#else
    portENTER_CRITICAL_SAFE(&periph_spinlock);
    ref_counts[PERIPH_WIFI_BT_COMMON_MODULE]--;
    if (ref_counts[PERIPH_WIFI_BT_COMMON_MODULE] == 0) {
        periph_ll_wifi_bt_module_disable_clk_set_rst();
    }
    portEXIT_CRITICAL_SAFE(&periph_spinlock);
#endif
}
#endif  //#if SOC_BT_SUPPORTED || SOC_WIFI_SUPPORTED
#endif  //#if !SOC_IEEE802154_BLE_ONLY

#if CONFIG_ESP_WIFI_ENABLED
void wifi_module_enable(void)
{
#if SOC_MODEM_CLOCK_IS_INDEPENDENT
    modem_clock_module_enable(PERIPH_WIFI_MODULE);
#else
    portENTER_CRITICAL_SAFE(&periph_spinlock);
    periph_ll_wifi_module_enable_clk_clear_rst();
    portEXIT_CRITICAL_SAFE(&periph_spinlock);
#endif
}

void wifi_module_disable(void)
{
#if SOC_MODEM_CLOCK_IS_INDEPENDENT
    modem_clock_module_disable(PERIPH_WIFI_MODULE);
#else
    portENTER_CRITICAL_SAFE(&periph_spinlock);
    periph_ll_wifi_module_disable_clk_set_rst();
    portEXIT_CRITICAL_SAFE(&periph_spinlock);
#endif
}
#endif // CONFIG_ESP_WIFI_ENABLED