This example demonstrates how to use the esp_driver_cam component to capture DVP camera sensor signals and display it via DSI interface. This example will auto-detect camera sensors via [ESP camera sensor driver](https://components.espressif.com/components/espressif/esp_cam_sensor) and capture camera sensor signals via DVP interface and display it via DSI interface.
The subsections below give only absolutely necessary information. For full steps to configure ESP-IDF and use it to build and run projects, see [ESP-IDF Getting Started](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html#get-started).
**Note:** For EK79007 you will need to connect following pins:
- 5V - 5V
- GND - GND
- RST_LCD - 3V3
You can also connect camera sensors and LCD screens from other vendors to the ESP chip, you can find corresponding camera or LCD drivers from [ESP Component Registry](https://components.espressif.com), or design your own customized drivers.
First of all, your target must be supported by both:
- **By your ESP-IDF version**: For the full list of supported targets, run:
```
idf.py --list-targets
```
- **By this example**: For the full list of supported targets, refer to the supported targets table at the top of this README.
After you make sure that your target is supported, go to your example project directory and [set the chip target](https://docs.espressif.com/projects/esp-idf/en/latest/api-guides/tools/idf-py.html#select-the-target-chip-set-target):
```
idf.py set-target <target>
```
For example, to set esp32-P4 as the chip target, run:
```
idf.py set-target esp32p4
```
### Configure the Project
For information about Kconfig options, see [Project Configuration](https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/kconfig.html) > _Name of relevant section(s)_.
To conveniently check or modify Kconfig options for this example in a project configuration menu, run:
Remember to select the LCD screen model and set corresponding correct horizontal/vertical resolution in ``menuconfig`` > ``Example DSI Configuration``.
Available options for the camera sensor output horizontal/vertical resolution can be seen in ``menuconfig`` > ``Example Configuration``. Note that the horizontal resolution for the camera should be the same as the LCD screen horizontal resolution.
- Link to the ESP-IDF feature's API reference, for example [ESP-IDF: Camera Controller Driver](https://docs.espressif.com/projects/esp-idf/en/latest/api-reference/peripherals/camera_driver.html)
