examples/wifi/iperf/sdkconfig.defaults

CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=4096

CONFIG_FREERTOS_UNICORE=n
CONFIG_FREERTOS_HZ=1000

CONFIG_ESP_INT_WDT=n
CONFIG_ESP_TASK_WDT_EN=n

CONFIG_LWIP_IRAM_OPTIMIZATION=y
CONFIG_LWIP_TCPIP_TASK_PRIO=23

CONFIG_IPERF_TRAFFIC_TASK_PRIORITY=23
CONFIG_IPERF_REPORT_TASK_PRIORITY=24
CONFIG_COMPILER_OPTIMIZATION_PERF=y

CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE=y

# These two configurations disable the phy pll track feature, only used for experimental
CONFIG_ESP_PHY_DEBUG=y
CONFIG_ESP_PHY_DISABLE_PLL_TRACK=y
Rename Kconfig options (components/esp32) 2019-04-30 12:51:55 +02:00			`CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=4096`
example test: add test case for iperf example 2018-01-07 20:28:09 +08:00
kconfiglib: Allow CONFIG_xxx= to disable booleans But replace all sdkconfig.defaults to use the explicit =n (more correct) 2018-08-20 17:15:36 +10:00			`CONFIG_FREERTOS_UNICORE=n`
example: add iperf example Support iperf 2017-03-30 23:12:25 +08:00			`CONFIG_FREERTOS_HZ=1000`

Rename Kconfig options (components/esp32) 2019-04-30 12:51:55 +02:00			`CONFIG_ESP_INT_WDT=n`
TWDT: Use the new TWDT Kconfig options in the examples and tests 2022-09-27 14:41:12 +08:00			`CONFIG_ESP_TASK_WDT_EN=n`
example: add iperf example Support iperf 2017-03-30 23:12:25 +08:00
lwip/esp32/examples: wifi throughput optimizations 1. Put some lwip udp rx/tx relating functions to IRAM 2. Put some wifi rx/tx relating functions to IRAMa 3. Reduce wifi dynamic malloc from 4 to 1 for each ebuf 4. Update iperf example accordingly 5. Update libphy.a to v383 2018-01-23 15:17:46 +08:00			`CONFIG_LWIP_IRAM_OPTIMIZATION=y`
feat(wifi): optimize esp32c6 iperf performance 2023-09-04 14:34:54 +08:00			`CONFIG_LWIP_TCPIP_TASK_PRIO=23`

			`CONFIG_IPERF_TRAFFIC_TASK_PRIORITY=23`
			`CONFIG_IPERF_REPORT_TASK_PRIORITY=24`
			`CONFIG_COMPILER_OPTIMIZATION_PERF=y`
iperf: increased app partition size in example 2025-05-19 14:11:19 +08:00
			`CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE=y`
feat(wifi): set phy pll track disable default 2025-06-13 14:26:03 +08:00
			`# These two configurations disable the phy pll track feature, only used for experimental`
			`CONFIG_ESP_PHY_DEBUG=y`
			`CONFIG_ESP_PHY_DISABLE_PLL_TRACK=y`