mirror of
https://github.com/espressif/esp-idf.git
synced 2026-05-05 12:25:03 +02:00
docs: update redirected links
This commit is contained in:
Marius Vikhammer
@@ -1,4 +1,4 @@
|
||||
ESP32-PICO-DevKitM-2
|
||||
ESP32-PICO-DevKitM-2
|
||||
*********************
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
@@ -10,7 +10,7 @@ ESP32-PICO-DevKitM-2 is an ESP32-based development board produced by `Espressif
|
||||
|
||||
The core of this board is `ESP32-PICO-MINI-02(02U) <https://www.espressif.com/en/products/modules>`_ module with complete Wi-Fi and Bluetooth functionalities. The development board features a USB-to-UART Bridge circuit which allows developers to connect the board to a computer's USB port for flashing and debugging.
|
||||
|
||||
All the IO signals and system power on ESP32-PICO-MINI-02(02U) are led out to two rows of 18 x 0.1" header pads on both sides of the development board for easy access. For compatibility with Dupont wires, all header pads are populated with two rows of male pin headers.
|
||||
All the IO signals and system power on ESP32-PICO-MINI-02(02U) are led out to two rows of 18 x 0.1" header pads on both sides of the development board for easy access. For compatibility with Dupont wires, all header pads are populated with two rows of male pin headers.
|
||||
|
||||
.. note::
|
||||
|
||||
@@ -24,7 +24,7 @@ ESP32-PICO-DevKitM-2 provides the users with hardware for development of applica
|
||||
:alt: ESP32-PICO-DevKitM-2 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-DevKitM-2 Overview (click to enlarge)
|
||||
ESP32-PICO-DevKitM-2 Overview (click to enlarge)
|
||||
|
||||
This guide covers:
|
||||
|
||||
@@ -52,11 +52,11 @@ The following figure and the table below describe the key components, interfaces
|
||||
:alt: ESP32-PICO-DevKitM-2 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-DevKitM-2 board layout - front (click to enlarge)
|
||||
ESP32-PICO-DevKitM-2 board layout - front (click to enlarge)
|
||||
|
||||
Below is the description of the items identified in the figure starting from the top left corner and going clockwise.
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:widths: 10 25
|
||||
:header-rows: 1
|
||||
|
||||
@@ -106,7 +106,7 @@ Retail Orders
|
||||
|
||||
If you order one or several samples of the board, each ESP32-PICO-DevKitM-2 development board comes in an individual package.
|
||||
|
||||
For retail orders, please go to https://www.espressif.com/en/company/contact/buy-a-sample.
|
||||
For retail orders, please go to https://www.espressif.com/en/contact-us/get-samples.
|
||||
|
||||
Wholesale Orders
|
||||
------------------
|
||||
@@ -129,7 +129,7 @@ The block diagram below shows the main components of ESP32-PICO-DevKitM-2 and th
|
||||
:alt: ESP32-PICO-DevKitM-2 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-DevKitM-2 Block Diagram (click to enlarge)
|
||||
ESP32-PICO-DevKitM-2 Block Diagram (click to enlarge)
|
||||
|
||||
Power Supply Options
|
||||
--------------------
|
||||
@@ -153,7 +153,7 @@ The two tables below provide the **Name** and **Function** of I/O header pins on
|
||||
Header J2
|
||||
""""""""""""
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:widths: 5 5 5 35
|
||||
:header-rows: 1
|
||||
|
||||
@@ -233,12 +233,12 @@ Header J2
|
||||
- VDD33 (3V3)
|
||||
- P
|
||||
- 3.3 V power supply
|
||||
|
||||
|
||||
|
||||
Header J3
|
||||
"""""""""""""
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:widths: 5 5 5 35
|
||||
:header-rows: 1
|
||||
|
||||
@@ -318,7 +318,7 @@ Header J3
|
||||
- EXT_5V (5V)
|
||||
- P
|
||||
- 5V power supply
|
||||
|
||||
|
||||
|
||||
.. _get-started-pico-devkitm-2-pin-notes:
|
||||
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
ESP32-PICO-KIT-1
|
||||
ESP32-PICO-KIT-1
|
||||
*****************
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
@@ -19,7 +19,7 @@ This setup reduces the costs of additional external components as well as the co
|
||||
|
||||
The development board features a USB-to-UART Bridge circuit which allows developers to connect the board to a computer's USB port for flashing and debugging.
|
||||
|
||||
All the IO signals and system power on ESP32-PICO-V3 are led out to two rows of 18 x 0.1" header pads on both sides of the development board for easy access. For compatibility with Dupont wires, all header pads are populated with two rows of male pin headers.
|
||||
All the IO signals and system power on ESP32-PICO-V3 are led out to two rows of 18 x 0.1" header pads on both sides of the development board for easy access. For compatibility with Dupont wires, all header pads are populated with two rows of male pin headers.
|
||||
|
||||
.. note::
|
||||
|
||||
@@ -33,7 +33,7 @@ ESP32-PICO-KIT-1 provides the users with hardware for development of application
|
||||
:alt: ESP32-PICO-KIT-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT-1 Overview (click to enlarge)
|
||||
ESP32-PICO-KIT-1 Overview (click to enlarge)
|
||||
|
||||
This guide covers:
|
||||
|
||||
@@ -61,12 +61,12 @@ The following figure and the table below describe the key components, interfaces
|
||||
:alt: ESP32-PICO-KIT-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT-1 board layout - front (click to enlarge)
|
||||
ESP32-PICO-KIT-1 board layout - front (click to enlarge)
|
||||
|
||||
|
||||
Below is the description of the items identified in the figure starting from the top left corner and going clockwise.
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:widths: 10 25
|
||||
:header-rows: 1
|
||||
|
||||
@@ -117,7 +117,7 @@ Retail Orders
|
||||
|
||||
If you order one or several samples of the board, each ESP32-PICO-KIT-1 development board comes in an individual package.
|
||||
|
||||
For retail orders, please go to https://www.espressif.com/en/company/contact/buy-a-sample.
|
||||
For retail orders, please go to https://www.espressif.com/en/contact-us/get-samples.
|
||||
|
||||
|
||||
Wholesale Orders
|
||||
@@ -141,7 +141,7 @@ The block diagram below shows the main components of ESP32-PICO-KIT-1 and their
|
||||
:alt: ESP32-PICO-KIT-1 (click to enlarge)
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-PICO-KIT-1 Block Diagram (click to enlarge)
|
||||
ESP32-PICO-KIT-1 Block Diagram (click to enlarge)
|
||||
|
||||
Power Supply Options
|
||||
--------------------
|
||||
@@ -165,7 +165,7 @@ The two tables below provide the **Name** and **Function** of I/O header pins on
|
||||
Header J2
|
||||
""""""""""""
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:widths: 5 5 5 35
|
||||
:header-rows: 1
|
||||
|
||||
@@ -245,12 +245,12 @@ Header J2
|
||||
- VDD33 (3V3)
|
||||
- P
|
||||
- 3.3 V power supply
|
||||
|
||||
|
||||
|
||||
Header J3
|
||||
"""""""""
|
||||
|
||||
.. list-table::
|
||||
.. list-table::
|
||||
:widths: 5 5 5 35
|
||||
:header-rows: 1
|
||||
|
||||
@@ -330,7 +330,7 @@ Header J3
|
||||
- EXT_5V (5V)
|
||||
- P
|
||||
- 5V power supply
|
||||
|
||||
|
||||
|
||||
.. _get-started-pico-kit-1-pin-notes:
|
||||
|
||||
@@ -361,7 +361,7 @@ No previous versions available.
|
||||
Related Documents
|
||||
===================
|
||||
|
||||
* `ESP32-PICO-V3 Datasheet <http://espressif.com/sites/default/files/documentation/esp32-pico-v3_datasheet_en.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-V3 Datasheet <https://espressif.com/sites/default/files/documentation/esp32-pico-v3_datasheet_en.pdf>`_ (PDF)
|
||||
* `ESP Product Selector <https://products.espressif.com/#/product-selector?names=>`_
|
||||
* `ESP32-PICO-KIT-1 Schematic <https://dl.espressif.com/dl/schematics/SCH_ESP32-PICO-KIT-1_V1_0_20200811A.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-KIT-1 PCB Layout <https://dl.espressif.com/dl/schematics/PCB_ESP32-PICO-KIT-1_V1.0_20200811.pdf>`_ (PDF)
|
||||
|
||||
@@ -43,7 +43,7 @@ Below is the description of the items identified in the figure starting from the
|
||||
:widths: 25 75
|
||||
:header-rows: 1
|
||||
|
||||
* - Key Component
|
||||
* - Key Component
|
||||
- Description
|
||||
* - ESP32-PICO-D4
|
||||
- Standard ESP32-PICO-D4 module soldered to the ESP32-PICO-KIT V3 board. The complete ESP32 system on a chip (ESP32 SoC) has been integrated into the SiP module, requiring only an external antenna with LC matching network, decoupling capacitors, and a pull-up resistor for EN signals to function properly.
|
||||
@@ -75,5 +75,5 @@ Related Documents
|
||||
-----------------
|
||||
|
||||
* `ESP32-PICO-KIT V3 schematic <https://dl.espressif.com/dl/schematics/esp32-pico-kit-v3_schematic.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-D4 Datasheet <http://espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-D4 Datasheet <https://espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf>`_ (PDF)
|
||||
* :doc:`../../hw-reference/index`
|
||||
|
||||
@@ -225,7 +225,7 @@ Related Documents
|
||||
* `ESP32-PICO-KIT V4 schematic <https://dl.espressif.com/dl/schematics/esp32-pico-kit-v4_schematic.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-KIT V4.1 schematic <https://dl.espressif.com/dl/schematics/esp32-pico-kit-v4.1_schematic.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-KIT Reference Design <https://www.espressif.com/sites/default/files/documentation/esp32-pico-kit_v4.1_20180314_en.zip>`_ containing OrCAD schematic, PCB layout, gerbers and BOM
|
||||
* `ESP32-PICO-D4 Datasheet <http://espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf>`_ (PDF)
|
||||
* `ESP32-PICO-D4 Datasheet <https://espressif.com/sites/default/files/documentation/esp32-pico-d4_datasheet_en.pdf>`_ (PDF)
|
||||
* :doc:`../../hw-reference/index`
|
||||
|
||||
|
||||
|
||||
@@ -10,9 +10,9 @@ ESP32-DevKitM-1 is an ESP32-MINI-1(1U)-based development board produced by Espre
|
||||
|
||||
|
||||
+---------------------------+-------------------------------+
|
||||
| |ESP32-DevKitM-1 - front| | |ESP32-DevKitM-1 - isometric| |
|
||||
| |ESP32-DevKitM-1 - front| | |ESP32-DevKitM-1 - isometric| |
|
||||
+---------------------------+-------------------------------+
|
||||
| ESP32-DevKitM-1 - front | ESP32-DevKitM-1 - isometric |
|
||||
| ESP32-DevKitM-1 - front | ESP32-DevKitM-1 - isometric |
|
||||
+---------------------------+-------------------------------+
|
||||
|
||||
.. |ESP32-DevKitM-1 - front| image:: ../../../_static/esp32-DevKitM-1-front.png
|
||||
@@ -27,13 +27,13 @@ The document consists of the following major sections:
|
||||
- `Related Documents`_: Gives links to related documentaiton.
|
||||
|
||||
|
||||
Getting Started
|
||||
Getting Started
|
||||
===================
|
||||
|
||||
This section describes how to get started with ESP32-DevKitM-1. It begins with a few introductory sections about the ESP32-DevKitM-1, then Section `Start Application Development`_ provides instructions on how to do the initial hardware setup and then how to flash firmware onto the ESP32-DevKitM-1.
|
||||
|
||||
|
||||
Overview
|
||||
Overview
|
||||
-------------
|
||||
|
||||
This is a small and convenient development board that features:
|
||||
@@ -45,25 +45,25 @@ This is a small and convenient development board that features:
|
||||
- a few other components
|
||||
|
||||
|
||||
Contents and Packaging
|
||||
Contents and Packaging
|
||||
--------------------------
|
||||
|
||||
Retail orders
|
||||
Retail orders
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
If you order a few samples, each ESP32-DevKitM-1 comes in an individual package in either antistatic bag or any packaging depending on your retailer.
|
||||
|
||||
For retail orders, please go to https://www.espressif.com/en/company/contact/buy-a-sample.
|
||||
For retail orders, please go to https://www.espressif.com/en/contact-us/get-samples.
|
||||
|
||||
|
||||
Wholesale Orders
|
||||
Wholesale Orders
|
||||
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
If you order in bulk, the boards come in large cardboard boxes.
|
||||
|
||||
For wholesale orders, please go to https://www.espressif.com/en/contact-us/sales-questions.
|
||||
|
||||
Description of Components
|
||||
Description of Components
|
||||
----------------------------
|
||||
|
||||
The following figure and the table below describe the key components, interfaces and controls of the ESP32-DevKitM-1 board. We take the board with a ESP32-MINI-1 module as an example in the following sections.
|
||||
@@ -84,7 +84,7 @@ The following figure and the table below describe the key components, interfaces
|
||||
* - Key Component
|
||||
- Description
|
||||
* - On-board module
|
||||
- ESP32-MINI-1 module or ESP32-MINI-1U module. ESP32-MINI-1 comes with an on-board PCB antenna. ESP32-MINI-1U comes with an external antenna connector. The two modules both have a 4 MB flash in chip package. For details, please see `ESP32-MINI-1 & ESP32-MINI-1U Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-mini-1_datasheet_en.pdf>`_.
|
||||
- ESP32-MINI-1 module or ESP32-MINI-1U module. ESP32-MINI-1 comes with an on-board PCB antenna. ESP32-MINI-1U comes with an external antenna connector. The two modules both have a 4 MB flash in chip package. For details, please see `ESP32-MINI-1 & ESP32-MINI-1U Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-mini-1_datasheet_en.pdf>`_.
|
||||
* - 5 V to 3.3 V LDO
|
||||
- Power regulator converts 5 V to 3.3 V.
|
||||
* - Boot Button
|
||||
@@ -102,21 +102,21 @@ The following figure and the table below describe the key components, interfaces
|
||||
|
||||
|
||||
|
||||
Start Application Development
|
||||
Start Application Development
|
||||
----------------------------------
|
||||
|
||||
Before powering up your ESP32-DevKitM-1, please make sure that it is in good condition with no obvious signs of damage.
|
||||
|
||||
|
||||
Required Hardware
|
||||
Required Hardware
|
||||
^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
- ESP32-DevKitM-1
|
||||
- USB 2.0 cable (Standard-A to Micro-B)
|
||||
- Computer running Windows, Linux, or macOS
|
||||
- ESP32-DevKitM-1
|
||||
- USB 2.0 cable (Standard-A to Micro-B)
|
||||
- Computer running Windows, Linux, or macOS
|
||||
|
||||
|
||||
Software Setup
|
||||
Software Setup
|
||||
^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-started-step-by-step` will quickly help you set up the development environment and then flash an application example onto your ESP32-DevKitM-1.
|
||||
@@ -125,23 +125,23 @@ Please proceed to :doc:`../../get-started/index`, where Section :ref:`get-starte
|
||||
|
||||
ESP32-DevKitM-1 is a board with a single core module, please enable single core mode (:ref:`CONFIG_FREERTOS_UNICORE`) in :ref:`menuconfig <get-started-configure>` before flashing your applications.
|
||||
|
||||
Hardware Reference
|
||||
Hardware Reference
|
||||
======================
|
||||
|
||||
Block Diagram
|
||||
Block Diagram
|
||||
----------------------
|
||||
|
||||
A block diagram below shows the components of ESP32-DevKitM-1 and their interconnections.
|
||||
|
||||
.. figure:: ../../../_static/esp32-DevKitM-1_v1_SystemBlock.png
|
||||
:align: center
|
||||
:alt: ESP32-DevKitM-1
|
||||
:alt: ESP32-DevKitM-1
|
||||
:figclass: align-center
|
||||
|
||||
ESP32-DevKitM-1
|
||||
ESP32-DevKitM-1
|
||||
|
||||
|
||||
Power Source Select
|
||||
Power Source Select
|
||||
----------------------
|
||||
|
||||
There are three mutually exclusive ways to provide power to the board:
|
||||
@@ -161,143 +161,143 @@ Pin Descriptions
|
||||
|
||||
The table below provides the Name and Function of pins on both sides of the board. For peripheral pin configurations, please refer to `ESP32 Datasheet`_.
|
||||
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
:widths: 10 12 12 66
|
||||
|
||||
|
||||
.. list-table::
|
||||
:header-rows: 1
|
||||
:widths: 10 12 12 66
|
||||
|
||||
|
||||
* - No.
|
||||
- Name
|
||||
- Type
|
||||
- Function
|
||||
- Name
|
||||
- Type
|
||||
- Function
|
||||
* - 1
|
||||
- GND
|
||||
- P
|
||||
- Ground
|
||||
- GND
|
||||
- P
|
||||
- Ground
|
||||
* - 2
|
||||
- 3V3
|
||||
- P
|
||||
- 3.3 V power supply
|
||||
- 3V3
|
||||
- P
|
||||
- 3.3 V power supply
|
||||
* - 3
|
||||
- I36
|
||||
- I
|
||||
- GPIO36, ADC1_CH0, RTC_GPIO0
|
||||
- I36
|
||||
- I
|
||||
- GPIO36, ADC1_CH0, RTC_GPIO0
|
||||
* - 4
|
||||
- I37
|
||||
- I
|
||||
- GPIO37, ADC1_CH1, RTC_GPIO1
|
||||
- I37
|
||||
- I
|
||||
- GPIO37, ADC1_CH1, RTC_GPIO1
|
||||
* - 5
|
||||
- I38
|
||||
- I
|
||||
- GPIO38, ADC1_CH2, RTC_GPIO2
|
||||
- I38
|
||||
- I
|
||||
- GPIO38, ADC1_CH2, RTC_GPIO2
|
||||
* - 6
|
||||
- I39
|
||||
- I
|
||||
- GPIO39, ADC1_CH3, RTC_GPIO3
|
||||
- I39
|
||||
- I
|
||||
- GPIO39, ADC1_CH3, RTC_GPIO3
|
||||
* - 7
|
||||
- RST
|
||||
- I
|
||||
- Reset; High: enable; Low: powers off
|
||||
- Reset; High: enable; Low: powers off
|
||||
* - 8
|
||||
- I34
|
||||
- I
|
||||
- GPIO34, ADC1_CH6, RTC_GPIO4
|
||||
- I34
|
||||
- I
|
||||
- GPIO34, ADC1_CH6, RTC_GPIO4
|
||||
* - 9
|
||||
- I35
|
||||
- I
|
||||
- GPIO35, ADC1_CH7, RTC_GPIO5
|
||||
- I35
|
||||
- I
|
||||
- GPIO35, ADC1_CH7, RTC_GPIO5
|
||||
* - 10
|
||||
- IO32
|
||||
- I/O
|
||||
- GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9
|
||||
- IO32
|
||||
- I/O
|
||||
- GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9
|
||||
* - 11
|
||||
- IO33
|
||||
- I/O
|
||||
- GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8
|
||||
- IO33
|
||||
- I/O
|
||||
- GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8
|
||||
* - 12
|
||||
- IO25
|
||||
- I/O
|
||||
- GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
|
||||
- IO25
|
||||
- I/O
|
||||
- GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
|
||||
* - 13
|
||||
- IO26
|
||||
- I/O
|
||||
- GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
|
||||
- IO26
|
||||
- I/O
|
||||
- GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
|
||||
* - 14
|
||||
- IO27
|
||||
- I/O
|
||||
- GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
|
||||
- IO27
|
||||
- I/O
|
||||
- GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
|
||||
* - 15
|
||||
- IO14
|
||||
- I/O
|
||||
- GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
|
||||
- IO14
|
||||
- I/O
|
||||
- GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
|
||||
* - 16
|
||||
- 5V
|
||||
- P
|
||||
- 5 V power supply
|
||||
- P
|
||||
- 5 V power supply
|
||||
* - 17
|
||||
- IO12
|
||||
- I/O
|
||||
- GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3
|
||||
- IO12
|
||||
- I/O
|
||||
- GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3
|
||||
* - 18
|
||||
- IO13
|
||||
- I/O
|
||||
- GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
|
||||
- IO13
|
||||
- I/O
|
||||
- GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
|
||||
* - 19
|
||||
- IO15
|
||||
- I/O
|
||||
- GPIO15, ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0, HS2_CMD, SD_CMD, EMAC_RXD3
|
||||
- IO15
|
||||
- I/O
|
||||
- GPIO15, ADC2_CH3, TOUCH3, RTC_GPIO13, MTDO, HSPICS0, HS2_CMD, SD_CMD, EMAC_RXD3
|
||||
* - 20
|
||||
- IO2
|
||||
- I/O
|
||||
- GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
|
||||
- IO2
|
||||
- I/O
|
||||
- GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
|
||||
* - 21
|
||||
- IO0
|
||||
- I/O
|
||||
- GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
|
||||
- IO0
|
||||
- I/O
|
||||
- GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
|
||||
* - 22
|
||||
- IO4
|
||||
- I/O
|
||||
- GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
||||
- IO4
|
||||
- I/O
|
||||
- GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
||||
* - 23
|
||||
- IO9
|
||||
- I/O
|
||||
- GPIO9, HS1_DATA2, U1RXD, SD_DATA2
|
||||
- IO9
|
||||
- I/O
|
||||
- GPIO9, HS1_DATA2, U1RXD, SD_DATA2
|
||||
* - 24
|
||||
- IO10
|
||||
- I/O
|
||||
- GPIO10, HS1_DATA3, U1TXD, SD_DATA3
|
||||
- IO10
|
||||
- I/O
|
||||
- GPIO10, HS1_DATA3, U1TXD, SD_DATA3
|
||||
* - 25
|
||||
- IO5
|
||||
- I/O
|
||||
- GPIO5, HS1_DATA6, VSPICS0, EMAC_RX_CLK
|
||||
- IO5
|
||||
- I/O
|
||||
- GPIO5, HS1_DATA6, VSPICS0, EMAC_RX_CLK
|
||||
* - 26
|
||||
- IO18
|
||||
- I/O
|
||||
- GPIO18, HS1_DATA7, VSPICLK
|
||||
- IO18
|
||||
- I/O
|
||||
- GPIO18, HS1_DATA7, VSPICLK
|
||||
* - 27
|
||||
- IO23
|
||||
- I/O
|
||||
- GPIO23, HS1_STROBE, VSPID
|
||||
- IO23
|
||||
- I/O
|
||||
- GPIO23, HS1_STROBE, VSPID
|
||||
* - 28
|
||||
- IO19
|
||||
- I/O
|
||||
- GPIO19, VSPIQ, U0CTS, EMAC_TXD0
|
||||
- IO19
|
||||
- I/O
|
||||
- GPIO19, VSPIQ, U0CTS, EMAC_TXD0
|
||||
* - 29
|
||||
- IO22
|
||||
- I/O
|
||||
- GPIO22, VSPIWP, U0RTS, EMAC_TXD1
|
||||
- IO22
|
||||
- I/O
|
||||
- GPIO22, VSPIWP, U0RTS, EMAC_TXD1
|
||||
* - 30
|
||||
- IO21
|
||||
- I/O
|
||||
- GPIO21, VSPIHD, EMAC_TX_EN
|
||||
- IO21
|
||||
- I/O
|
||||
- GPIO21, VSPIHD, EMAC_TX_EN
|
||||
* - 31
|
||||
- TXD0
|
||||
- I/O
|
||||
- GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
|
||||
- TXD0
|
||||
- I/O
|
||||
- GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
|
||||
* - 32
|
||||
- RXD0
|
||||
- I/O
|
||||
- GPIO3, U0RXD, CLK_OUT2
|
||||
- RXD0
|
||||
- I/O
|
||||
- GPIO3, U0RXD, CLK_OUT2
|
||||
|
||||
|
||||
Hardware Revision Details
|
||||
@@ -306,10 +306,10 @@ Hardware Revision Details
|
||||
No previous versions available.
|
||||
|
||||
|
||||
Related Documents
|
||||
Related Documents
|
||||
============================
|
||||
|
||||
* `ESP32-MINI-1 & ESP32-MINI-1U Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-mini-1_datasheet_en.pdf>`_ (PDF)
|
||||
* `ESP32-MINI-1 & ESP32-MINI-1U Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-mini-1_datasheet_en.pdf>`_ (PDF)
|
||||
* `ESP32-DevKitM-1 Schematics <https://dl.espressif.com/dl/schematics/SCH_ESP32-DEVKITM-1_V1_20200910A.pdf>`_ (PDF)
|
||||
* `ESP32-DevKitM-1 PCB layout <https://dl.espressif.com/dl/schematics/PCB_ESP32-DevKitM-1_V1_20200910AE.pdf>`_ (PDF)
|
||||
* `ESP32-DevKitM-1 layout <https://dl.espressif.com/dl/schematics/ESP32-DevKitM-1_V1.dxf>`_ (DXF) - You can view it with `Autodesk Viewer <https://viewer.autodesk.com/>`_ online
|
||||
|
||||
@@ -4,14 +4,14 @@ ESP32-DevKitS(-R)
|
||||
|
||||
:link_to_translation:`zh_CN:[中文]`
|
||||
|
||||
This user guide provides information on ESP32-DevKitS(-R), an ESP32-based flashing board produced by Espressif.
|
||||
This user guide provides information on ESP32-DevKitS(-R), an ESP32-based flashing board produced by Espressif.
|
||||
|
||||
ESP32-DevKitS(-R) is a combination of two board names: ESP32-DevKitS and ESP32-DevKitS-R. S stands for springs, and R stands for WROVER.
|
||||
|
||||
+-----------------+-------------------+
|
||||
| |ESP32-DevKitS| | |ESP32-DevKitS-R| |
|
||||
+-----------------+-------------------+
|
||||
| ESP32-DevKitS | ESP32-DevKitS-R |
|
||||
| ESP32-DevKitS | ESP32-DevKitS-R |
|
||||
+-----------------+-------------------+
|
||||
|
||||
.. |ESP32-DevKitS| image:: ../../../_static/esp32-devkits-v1.1-layout-isometric-raw.png
|
||||
@@ -37,7 +37,7 @@ Overview
|
||||
|
||||
ESP32-DevKitS(-R) is Espressif's flashing board designed specifically for ESP32. It can be used to flash an ESP32 module without soldering the module to the power supply and signal lines. With a module mounted, ESP32-DevKitS(-R) can also be used as a mini development board like ESP32-DevKitC.
|
||||
|
||||
ESP32-DevKitS and ESP32-DevKitS-R boards vary only in layout of spring pins to fit the following ESP32 modules.
|
||||
ESP32-DevKitS and ESP32-DevKitS-R boards vary only in layout of spring pins to fit the following ESP32 modules.
|
||||
|
||||
- ESP32-DevKitS:
|
||||
- ESP32-WROOM-32
|
||||
@@ -117,7 +117,7 @@ Hardware Setup
|
||||
Please mount a module of your choice onto your ESP32-DevKitS(-R) according to the following steps:
|
||||
|
||||
- Gently put your module on the ESP32-DevKitS(-R) board. Make sure that castellated holes on your module are aligned with spring pins on the board.
|
||||
- Press your module down into the board until it clicks.
|
||||
- Press your module down into the board until it clicks.
|
||||
- Check whether all spring pins are inserted into castellated holes. If there are some misaligned spring pins, place them into castellated holes with tweezers.
|
||||
|
||||
|
||||
@@ -147,14 +147,14 @@ Board Dimensions
|
||||
:align: center
|
||||
:alt: ESP32-DevKitS
|
||||
:figclass: align-center
|
||||
|
||||
|
||||
ESP32-DevKitS board dimensions - back
|
||||
|
||||
.. figure:: ../../../_static/esp32-devkits-r-v1.1-dimensions-back.png
|
||||
:align: center
|
||||
:alt: ESP32-DevKitS-R
|
||||
:figclass: align-center
|
||||
|
||||
|
||||
ESP32-DevKitS-R board dimensions - back
|
||||
|
||||
|
||||
@@ -166,7 +166,7 @@ Retail orders
|
||||
|
||||
If you order a few samples, each ESP32-DevKitS(-R) comes in an individual package in either antistatic bag or any packaging depending on a retailer.
|
||||
|
||||
For retail orders, please go to https://www.espressif.com/en/company/contact/buy-a-sample.
|
||||
For retail orders, please go to https://www.espressif.com/en/contact-us/get-samples.
|
||||
|
||||
|
||||
Wholesale Orders
|
||||
@@ -266,4 +266,4 @@ Related Documents
|
||||
- `ESP32-SOLO-1 Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-solo-1_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP32-WROVER Datasheet <https://espressif.com/sites/default/files/documentation/esp32-wrover_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP32-WROVER-B Datasheet <https://www.espressif.com/sites/default/files/documentation/esp32-wrover-b_datasheet_en.pdf>`_ (PDF)
|
||||
- `ESP Product Selector <https://products.espressif.com/#/product-selector?names=>`_
|
||||
- `ESP Product Selector <https://products.espressif.com/#/product-selector?names=>`_
|
||||
|
||||
Reference in New Issue
Block a user