diff --git a/components/esp_hw_support/port/esp32s3/opiram_psram.c b/components/esp_hw_support/port/esp32s3/opiram_psram.c
index efff2ec4d9..6c45cb4f1f 100644
--- a/components/esp_hw_support/port/esp32s3/opiram_psram.c
+++ b/components/esp_hw_support/port/esp32s3/opiram_psram.c
@@ -205,10 +205,19 @@ static void IRAM_ATTR s_print_psram_info(opi_psram_mode_reg_t *reg_val)
                                                                                 reg_val->mr0.drive_str == 0x02 ? 4 : 8);
 }
 
+static void IRAM_ATTR s_init_psram_pins(void)
+{
+    //Set cs1 pin function
+    PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[OCT_PSRAM_CS1_IO],  FUNC_SPICS1_SPICS1);
+    //Set mspi cs1 drive strength
+    PIN_SET_DRV(IO_MUX_GPIO26_REG, 3);
+    //Set psram clock pin drive strength
+    REG_SET_FIELD(SPI_MEM_DATE_REG(0), SPI_MEM_SPI_SMEM_SPICLK_FUN_DRV, 3);
+}
+
 esp_err_t IRAM_ATTR psram_enable(psram_cache_mode_t mode, psram_vaddr_mode_t vaddrmode)
 {
-    // enable CS signal
-    PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[OCT_PSRAM_CS1_IO],  FUNC_SPICS1_SPICS1);
+    s_init_psram_pins();
 
     //enter MSPI slow mode to init PSRAM device registers
     spi_timing_enter_mspi_low_speed_mode();
diff --git a/components/esp_system/port/cpu_start.c b/components/esp_system/port/cpu_start.c
index 023f1a943e..220daa0d23 100644
--- a/components/esp_system/port/cpu_start.c
+++ b/components/esp_system/port/cpu_start.c
@@ -366,6 +366,7 @@ void IRAM_ATTR call_start_cpu0(void)
     Cache_Set_IDROM_MMU_Size(cache_mmu_irom_size, CACHE_DROM_MMU_MAX_END - cache_mmu_irom_size);
 #endif // CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32H2
 
+    esp_mspi_pin_init();
 #if CONFIG_ESPTOOLPY_OCT_FLASH
     bool efuse_opflash_en = REG_GET_FIELD(EFUSE_RD_REPEAT_DATA3_REG, EFUSE_FLASH_TYPE);
     if (!efuse_opflash_en) {
diff --git a/components/spi_flash/esp32s3/mspi_timing_tuning_configs.h b/components/spi_flash/esp32s3/mspi_timing_tuning_configs.h
index d438d58d48..ef3550c246 100644
--- a/components/spi_flash/esp32s3/mspi_timing_tuning_configs.h
+++ b/components/spi_flash/esp32s3/mspi_timing_tuning_configs.h
@@ -36,6 +36,6 @@
 #define MSPI_TIMING_PSRAM_DEFAULT_CONFIG_ID_CORE_CLK_80M_MODULE_CLK_40M_DTR_MODE     4
 
 //Octal PSRAM: core clock 160M, module clock 80M, DTR mode
-#define MSPI_TIMING_PSRAM_CONFIG_TABLE_CORE_CLK_160M_MODULE_CLK_80M_DTR_MODE         {{1, 0, 0}, {0, 0, 0}, {3, 0, 1}, {1, 0, 1}, {0, 0, 1}, {3, 0, 2}, {1, 0, 2}, {0, 0, 2}, {3, 0, 3}, {1, 0, 3}, {0, 0, 3}, {3, 0, 4}, {1, 0, 4}, {0, 0, 4}}
+#define MSPI_TIMING_PSRAM_CONFIG_TABLE_CORE_CLK_160M_MODULE_CLK_80M_DTR_MODE         {{0, 0, 0}, {4, 2, 2}, {2, 1, 2}, {4, 1, 2}, {1, 0, 1}, {4, 0, 2}, {0, 0, 1}, {4, 2, 3}, {2, 1, 3}, {4, 1, 3}, {1, 0, 2}, {4, 0, 3}, {0, 0, 2}, {4, 2, 4}}
 #define MSPI_TIMING_PSRAM_CONFIG_NUM_CORE_CLK_160M_MODULE_CLK_80M_DTR_MODE           14
 #define MSPI_TIMING_PSRAM_DEFAULT_CONFIG_ID_CORE_CLK_160M_MODULE_CLK_80M_DTR_MODE    1
diff --git a/components/spi_flash/esp32s3/spi_flash_oct_flash_init.c b/components/spi_flash/esp32s3/spi_flash_oct_flash_init.c
index 42de479acc..f689b8bbe0 100644
--- a/components/spi_flash/esp32s3/spi_flash_oct_flash_init.c
+++ b/components/spi_flash/esp32s3/spi_flash_oct_flash_init.c
@@ -12,6 +12,7 @@
 #include "esp32s3/rom/opi_flash.h"
 #include "spi_flash_private.h"
 #include "soc/spi_mem_reg.h"
+#include "soc/io_mux_reg.h"
 #if CONFIG_ESPTOOLPY_FLASH_VENDOR_MXIC
 #include "opi_flash_cmd_format_mxic.h"
 #endif
@@ -21,40 +22,11 @@
 #define SPI_FLASH_SPI_CMD_RDCR      0x15
 #define SPI_FLASH_SPI_CMD_WRSRCR    0x01
 
-#define SPI_FLASH_OCTCLK_IO         30
-#define SPI_FLASH_OCTDQS_IO         37
-#define SPI_FLASH_OCTD0_IO          32
-#define SPI_FLASH_OCTD1_IO          31
-#define SPI_FLASH_OCTD2_IO          28
-#define SPI_FLASH_OCTD3_IO          27
-#define SPI_FLASH_OCTD4_IO          33
-#define SPI_FLASH_OCTD5_IO          34
-#define SPI_FLASH_OCTD6_IO          35
-#define SPI_FLASH_OCTD7_IO          36
-#define SPI_FLASH_OCTCS_IO          29
-#define SPI_FLASH_OCTCS1_IO         26
-
-
 // default value is rom_default_spiflash_legacy_flash_func
 extern const spiflash_legacy_funcs_t *rom_spiflash_legacy_funcs;
 extern int SPI_write_enable(void *spi);
 DRAM_ATTR const esp_rom_opiflash_def_t opiflash_cmd_def = OPI_CMD_FORMAT();
 
-void s_set_flash_pin_drive_capability(uint8_t drv)
-{
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTCLK_IO, drv);
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTDQS_IO, drv);
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTD0_IO, drv);
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTD1_IO, drv);
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTD2_IO, drv);
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTD3_IO, drv);
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTD4_IO, drv);
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTD5_IO, drv);
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTD6_IO, drv);
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTD7_IO, drv);
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTCS_IO, drv);
-    esp_rom_gpio_pad_set_drv(SPI_FLASH_OCTCS1_IO, drv);
-}
 
 static void s_register_rom_function(void)
 {
@@ -145,6 +117,14 @@ static void s_set_flash_ouput_driver_strength(int spi_num, uint8_t strength)
                               false);
 }
 
+static void s_set_pin_drive_capability(uint8_t drv)
+{
+    //flash clock
+    REG_SET_FIELD(SPI_MEM_DATE_REG(0), SPI_MEM_SPI_FMEM_SPICLK_FUN_DRV, 3);
+    //cs0
+    PIN_SET_DRV(IO_MUX_GPIO29_REG, 3);
+}
+
 static void s_flash_init_mxic(esp_rom_spiflash_read_mode_t mode)
 {
     esp_rom_opiflash_legacy_driver_init(&opiflash_cmd_def);
@@ -156,13 +136,13 @@ static void s_flash_init_mxic(esp_rom_spiflash_read_mode_t mode)
     // STR/DTR specific setting
     esp_rom_spiflash_wait_idle(&g_rom_flashchip);
 #if CONFIG_ESPTOOLPY_FLASHMODE_OPI_STR
-    s_set_flash_pin_drive_capability(1);
+    s_set_pin_drive_capability(3);
     s_set_flash_dtr_str_opi_mode(1, 0x1);
     esp_rom_opiflash_cache_mode_config(mode, &rom_opiflash_cmd_def->cache_rd_cmd);
     esp_rom_spi_set_dtr_swap_mode(0, false, false);
     esp_rom_spi_set_dtr_swap_mode(1, false, false);
 #else //CONFIG_ESPTOOLPY_FLASHMODE_OPI_DTR
-    s_set_flash_pin_drive_capability(3);
+    s_set_pin_drive_capability(3);
     s_set_flash_dtr_str_opi_mode(1, 0x2);
     esp_rom_opiflash_cache_mode_config(mode, &rom_opiflash_cmd_def->cache_rd_cmd);
     esp_rom_spi_set_dtr_swap_mode(0, true, true);
diff --git a/components/spi_flash/esp32s3/spi_timing_config.c b/components/spi_flash/esp32s3/spi_timing_config.c
index ef496e68cb..a96c294045 100644
--- a/components/spi_flash/esp32s3/spi_timing_config.c
+++ b/components/spi_flash/esp32s3/spi_timing_config.c
@@ -4,6 +4,7 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
+#include <sys/param.h>
 #include "sdkconfig.h"
 #include "string.h"
 #include "esp_attr.h"
@@ -156,16 +157,13 @@ void IRAM_ATTR spi_timing_config_flash_read_data(uint8_t spi_num, uint8_t *buf,
 #endif
 }
 
-void IRAM_ATTR spi_timing_config_psram_write_data(uint8_t spi_num, uint8_t *buf, uint32_t addr, uint32_t len)
+static void IRAM_ATTR s_psram_write_data(uint8_t spi_num, uint8_t *buf, uint32_t addr, uint32_t len)
 {
-#if CONFIG_ESPTOOLPY_OCT_FLASH
-    uint32_t cmd = OPI_PSRAM_SYNC_WRITE;
-    int dummy = OCT_PSRAM_WR_DUMMY_NUM;
-
+#if CONFIG_SPIRAM_MODE_OCT
     esp_rom_opiflash_exec_cmd(spi_num, ESP_ROM_SPIFLASH_OPI_DTR_MODE,
-                            cmd, 16,
+                            OPI_PSRAM_SYNC_WRITE, 16,
                             addr, 32,
-                            dummy,
+                            OCT_PSRAM_WR_DUMMY_NUM,
                             buf, 8 * len,
                             NULL, 0,
                             BIT(1),
@@ -175,16 +173,16 @@ void IRAM_ATTR spi_timing_config_psram_write_data(uint8_t spi_num, uint8_t *buf,
 #endif
 }
 
-void IRAM_ATTR spi_timing_config_psram_read_data(uint8_t spi_num,uint8_t *buf, uint32_t addr, uint32_t len)
+static void IRAM_ATTR s_psram_read_data(uint8_t spi_num, uint8_t *buf, uint32_t addr, uint32_t len)
 {
-#if CONFIG_ESPTOOLPY_OCT_FLASH
-    uint32_t cmd = OPI_PSRAM_SYNC_READ;
-    int dummy = OCT_PSRAM_RD_DUMMY_NUM;
-
+#if CONFIG_SPIRAM_MODE_OCT
+    for (int i = 0; i < 16; i++) {
+        REG_WRITE(SPI_MEM_W0_REG(1) + i*4, 0);
+    }
     esp_rom_opiflash_exec_cmd(spi_num, ESP_ROM_SPIFLASH_OPI_DTR_MODE,
-                            cmd, 16,
+                            OPI_PSRAM_SYNC_READ, 16,
                             addr, 32,
-                            dummy,
+                            OCT_PSRAM_RD_DUMMY_NUM,
                             NULL, 0,
                             buf, 8 * len,
                             BIT(1),
@@ -194,4 +192,29 @@ void IRAM_ATTR spi_timing_config_psram_read_data(uint8_t spi_num,uint8_t *buf, u
 #endif
 }
 
+static void IRAM_ATTR s_psram_execution(uint8_t spi_num, uint8_t *buf, uint32_t addr, uint32_t len, bool is_read)
+{
+    while (len) {
+        uint32_t length = MIN(len, 32);
+        if (is_read) {
+            s_psram_read_data(1, buf, addr, length);
+        } else {
+            s_psram_write_data(1, buf, addr, length);
+        }
+        addr += length;
+        buf += length;
+        len -= length;
+    }
+}
+
+void IRAM_ATTR spi_timing_config_psram_write_data(uint8_t spi_num, uint8_t *buf, uint32_t addr, uint32_t len)
+{
+    s_psram_execution(spi_num, buf, addr, len, false);
+}
+
+void IRAM_ATTR spi_timing_config_psram_read_data(uint8_t spi_num, uint8_t *buf, uint32_t addr, uint32_t len)
+{
+    s_psram_execution(spi_num, buf, addr, len, true);
+}
+
 #endif //#if SPI_TIMING_FLASH_NEEDS_TUNING || SPI_TIMING_PSRAM_NEEDS_TUNING
diff --git a/components/spi_flash/esp32s3/spi_timing_config.h b/components/spi_flash/esp32s3/spi_timing_config.h
index 0c94b2e718..9487d31b1d 100644
--- a/components/spi_flash/esp32s3/spi_timing_config.h
+++ b/components/spi_flash/esp32s3/spi_timing_config.h
@@ -30,12 +30,6 @@ extern "C" {
 //OCTAL FLASH
 #if CONFIG_ESPTOOLPY_OCT_FLASH
 
-// OCT FLASH 40M DTR
-#if SPI_TIMING_FLASH_DTR_MODE && CONFIG_ESPTOOLPY_FLASHFREQ_40M
-_Static_assert(!CONFIG_ESPTOOLPY_FLASHFREQ_40M, "Octal FLASH 40MHz DDR is not supported. TODO: IDF-1630");
-#define SPI_TIMING_FLASH_EXPECTED_CORE_CLK_MHZ                        160
-#endif
-
 //OCT FLASH 80M DTR
 #if SPI_TIMING_FLASH_DTR_MODE && CONFIG_ESPTOOLPY_FLASHFREQ_80M
 #define SPI_TIMING_FLASH_EXPECTED_CORE_CLK_MHZ                        160
@@ -46,11 +40,6 @@ _Static_assert(!CONFIG_ESPTOOLPY_FLASHFREQ_40M, "Octal FLASH 40MHz DDR is not su
 #define SPI_TIMING_FLASH_EXPECTED_CORE_CLK_MHZ                        240
 #endif
 
-//OCT FLASH 80M STR
-#if SPI_TIMING_FLASH_STR_MODE && CONFIG_ESPTOOLPY_FLASHFREQ_80M
-#define SPI_TIMING_FLASH_EXPECTED_CORE_CLK_MHZ                        160
-#endif
-
 //OCT FLASH 120M STR
 #if SPI_TIMING_FLASH_STR_MODE && CONFIG_ESPTOOLPY_FLASHFREQ_120M
 #define SPI_TIMING_FLASH_EXPECTED_CORE_CLK_MHZ                        120
@@ -67,11 +56,6 @@ _Static_assert(!CONFIG_ESPTOOLPY_FLASHFREQ_40M, "Octal FLASH 40MHz DDR is not su
 //OCTAL PSRAM
 #if CONFIG_SPIRAM_MODE_OCT
 
-//OCT 40M PSRAM
-#if SPI_TIMING_PSRAM_DTR_MODE && CONFIG_SPIRAM_SPEED_40M
-#define SPI_TIMING_PSRAM_EXPECTED_CORE_CLK_MHZ                        80
-#endif
-
 //OCT 80M PSRAM
 #if SPI_TIMING_PSRAM_DTR_MODE && CONFIG_SPIRAM_SPEED_80M
 #define SPI_TIMING_PSRAM_EXPECTED_CORE_CLK_MHZ                        160
diff --git a/components/spi_flash/flash_ops.c b/components/spi_flash/flash_ops.c
index c928634706..53fbe269f6 100644
--- a/components/spi_flash/flash_ops.c
+++ b/components/spi_flash/flash_ops.c
@@ -39,6 +39,7 @@
 #elif CONFIG_IDF_TARGET_ESP32S3
 #include "soc/spi_mem_reg.h"
 #include "esp32s3/rom/spi_flash.h"
+#include "esp32s3/rom/opi_flash.h"
 #include "esp32s3/rom/cache.h"
 #include "esp32s3/clk.h"
 #include "esp32s3/clk.h"
@@ -164,6 +165,17 @@ void IRAM_ATTR *spi_flash_malloc_internal(size_t size)
 }
 #endif
 
+void IRAM_ATTR esp_mspi_pin_init(void)
+{
+#if CONFIG_ESPTOOLPY_OCT_FLASH || CONFIG_SPIRAM_MODE_OCT
+    esp_rom_opiflash_pin_config();
+    extern void spi_timing_set_pin_drive_strength(void);
+    spi_timing_set_pin_drive_strength();
+#else
+    //Set F4R4 board pin drive strength. TODO: IDF-3663
+#endif
+}
+
 void spi_flash_init(void)
 {
     spi_flash_init_lock();
diff --git a/components/spi_flash/include/spi_flash_private.h b/components/spi_flash/include/spi_flash_private.h
index f792faef65..7435359f3e 100644
--- a/components/spi_flash/include/spi_flash_private.h
+++ b/components/spi_flash/include/spi_flash_private.h
@@ -56,6 +56,11 @@ void spi_timing_flash_tuning(void);
  */
 void spi_timing_psram_tuning(void);
 
+/**
+ * @brief To initislize the MSPI pins
+ */
+void esp_mspi_pin_init(void);
+
 /**
  * @brief Set SPI1 registers to make ROM functions work
  * @note This function is used for setting SPI1 registers to the state that ROM SPI functions work
diff --git a/components/spi_flash/spi_flash_timing_tuning.c b/components/spi_flash/spi_flash_timing_tuning.c
index 705da2c45c..52707d502b 100644
--- a/components/spi_flash/spi_flash_timing_tuning.c
+++ b/components/spi_flash/spi_flash_timing_tuning.c
@@ -12,14 +12,42 @@
 #include "esp_types.h"
 #include "esp_log.h"
 #include "soc/spi_mem_reg.h"
+#include "soc/io_mux_reg.h"
 #include "spi_flash_private.h"
 #if CONFIG_IDF_TARGET_ESP32S3
 #include "esp32s3/spi_timing_config.h"
 #endif
 
+#define ARRAY_SIZE(arr) (sizeof(arr)/sizeof(*(arr)))
+
+/*------------------------------------------------------------------------------
+ * Common settings
+ *----------------------------------------------------------------------------*/
+void spi_timing_set_pin_drive_strength(void)
+{
+    //For now, set them all to 3. Need to check after QVL test results are out. TODO: IDF-3663
+    //Set default clk
+    SET_PERI_REG_MASK(SPI_MEM_DATE_REG(0), SPI_MEM_SPICLK_PAD_DRV_CTL_EN);
+    REG_SET_FIELD(SPI_MEM_DATE_REG(0), SPI_MEM_SPI_SMEM_SPICLK_FUN_DRV, 3);
+    REG_SET_FIELD(SPI_MEM_DATE_REG(0), SPI_MEM_SPI_FMEM_SPICLK_FUN_DRV, 3);
+    //Set default mspi d0 ~ d7, dqs pin drive strength
+    uint32_t regs[] = {IO_MUX_GPIO27_REG, IO_MUX_GPIO28_REG,
+                       IO_MUX_GPIO31_REG, IO_MUX_GPIO32_REG,
+                       IO_MUX_GPIO33_REG, IO_MUX_GPIO34_REG,
+                       IO_MUX_GPIO35_REG, IO_MUX_GPIO36_REG,
+                       IO_MUX_GPIO37_REG};
+    for (int i = 0; i < ARRAY_SIZE(regs); i++) {
+        PIN_SET_DRV(regs[i], 3);
+    }
+}
+
+#if SPI_TIMING_FLASH_NEEDS_TUNING || SPI_TIMING_PSRAM_NEEDS_TUNING
 static spi_timing_tuning_param_t s_flash_best_timing_tuning_config;
 static spi_timing_tuning_param_t s_psram_best_timing_tuning_config;
 
+/*------------------------------------------------------------------------------
+ * Static functions to get clock configs
+ *----------------------------------------------------------------------------*/
 static spi_timing_config_core_clock_t get_mspi_core_clock(void)
 {
     return spi_timing_config_get_core_clock();
@@ -52,7 +80,9 @@ static uint32_t get_psram_clock_divider(void)
 #endif
 }
 
-#if SPI_TIMING_FLASH_NEEDS_TUNING || SPI_TIMING_PSRAM_NEEDS_TUNING
+/*------------------------------------------------------------------------------
+ * Static functions to do timing tuning
+ *----------------------------------------------------------------------------*/
 /**
  * Set timing tuning regs, in order to get successful sample points
  */
@@ -134,7 +164,6 @@ static void find_max_consecutive_success_points(uint8_t *array, uint32_t size, u
     while (i < size) {
         if (array[i]) {
             match_num++;
-
         } else {
             if (match_num > max) {
                 max = match_num;
@@ -149,13 +178,27 @@ static void find_max_consecutive_success_points(uint8_t *array, uint32_t size, u
     *out_end_index = match_num == size ? size : end;
 }
 
-static void select_best_tuning_config(spi_timing_config_t *config, uint32_t length, uint32_t end, bool is_flash)
+static void select_best_tuning_config(spi_timing_config_t *config, uint32_t consecutive_length, uint32_t end, bool is_flash)
 {
+#if (SPI_TIMING_FLASH_DTR_MODE && CONFIG_ESPTOOLPY_FLASHFREQ_80M) || (SPI_TIMING_PSRAM_DTR_MODE && CONFIG_SPIRAM_SPEED_80M)
+    //80M DTR best point scheme
     uint32_t best_point;
-    if (length >= 3) {
-        best_point = end - length / 2;
-    } else {
+    /**
+     * If the consecutive success point list is no longer than 2, or all available points are successful,
+     * tuning is FAIL, select default point, and generate a warning
+     */
+    //Define these magic number in macros in `spi_timing_config.h`. TODO: IDF-3146
+    if (consecutive_length <= 2 || consecutive_length >= 6) {
         best_point = config->default_config_id;
+        ESP_EARLY_LOGW("timing tuning:", "tuning fail, best point is %d\n", best_point + 1);
+    } else if (consecutive_length <= 4) {
+        //consevutive length :  3 or 4
+        best_point = end - 1;
+        ESP_EARLY_LOGD("timing tuning:","tuning success, best point is %d\n", best_point + 1);
+    } else {
+        //consecutive point list length equals 5
+        best_point = end - 2;
+        ESP_EARLY_LOGD("timing tuning:","tuning success, best point is %d\n", best_point + 1);
     }
 
     if (is_flash) {
@@ -163,6 +206,10 @@ static void select_best_tuning_config(spi_timing_config_t *config, uint32_t leng
     } else {
         s_psram_best_timing_tuning_config = config->tuning_config_table[best_point];
     }
+#else
+    //won't reach here
+    abort();
+#endif
 }
 
 static void do_tuning(uint8_t *reference_data, spi_timing_config_t *timing_config, bool is_flash)
@@ -185,7 +232,9 @@ static void do_tuning(uint8_t *reference_data, spi_timing_config_t *timing_confi
 #endif  //#if SPI_TIMING_FLASH_NEEDS_TUNING || SPI_TIMING_PSRAM_NEEDS_TUNING
 
 
-//------------------------------------------FLASH Timing Tuning----------------------------------------//
+/*------------------------------------------------------------------------------
+ * FLASH Timing Tuning
+ *----------------------------------------------------------------------------*/
 #if SPI_TIMING_FLASH_NEEDS_TUNING
 static void get_flash_tuning_configs(spi_timing_config_t *config)
 {
@@ -210,6 +259,7 @@ static void get_flash_tuning_configs(spi_timing_config_t *config)
 
 void spi_timing_flash_tuning(void)
 {
+    ESP_EARLY_LOGW("FLASH", "DO NOT USE FOR MASS PRODUCTION! Timing parameters will be updated in future IDF version.");
     /**
      * set SPI01 related regs to 20mhz configuration, to get reference data from FLASH
      * see detailed comments in this function (`spi_timing_enter_mspi_low_speed_mode)
@@ -235,7 +285,9 @@ void spi_timing_flash_tuning(void)
 #endif  //SPI_TIMING_FLASH_NEEDS_TUNING
 
 
-//------------------------------------------PSRAM Timing Tuning----------------------------------------//
+/*------------------------------------------------------------------------------
+ * PSRAM Timing Tuning
+ *----------------------------------------------------------------------------*/
 #if SPI_TIMING_PSRAM_NEEDS_TUNING
 static void get_psram_tuning_configs(spi_timing_config_t *config)
 {
@@ -256,6 +308,7 @@ static void get_psram_tuning_configs(spi_timing_config_t *config)
 
 void spi_timing_psram_tuning(void)
 {
+    ESP_EARLY_LOGW("PSRAM", "DO NOT USE FOR MASS PRODUCTION! Timing parameters will be updated in future IDF version.");
     /**
      * set SPI01 related regs to 20mhz configuration, to write reference data to PSRAM
      * see detailed comments in this function (`spi_timing_enter_mspi_low_speed_mode)
@@ -285,17 +338,21 @@ void spi_timing_psram_tuning(void)
 }
 #endif  //SPI_TIMING_PSRAM_NEEDS_TUNING
 
-
-//---------------------------------------------APIs to make SPI0 and SPI1 FLASH work for high/low freq-------------------------------//
+/*------------------------------------------------------------------------------
+ * APIs to make SPI0 and SPI1 FLASH work for high/low freq
+ *----------------------------------------------------------------------------*/
+#if SPI_TIMING_FLASH_NEEDS_TUNING || SPI_TIMING_PSRAM_NEEDS_TUNING
 static void clear_timing_tuning_regs(void)
 {
     spi_timing_config_flash_set_din_mode_num(0, 0, 0);  //SPI0 and SPI1 share the registers for flash din mode and num setting, so we only set SPI0's reg
     spi_timing_config_flash_set_extra_dummy(0, 0);
     spi_timing_config_flash_set_extra_dummy(1, 0);
 }
+#endif  //#if SPI_TIMING_FLASH_NEEDS_TUNING || SPI_TIMING_PSRAM_NEEDS_TUNING
 
 void spi_timing_enter_mspi_low_speed_mode(void)
 {
+#if SPI_TIMING_FLASH_NEEDS_TUNING || SPI_TIMING_PSRAM_NEEDS_TUNING
     /**
      * Here we are going to slow the SPI1 frequency to 20Mhz, so we need to set SPI1 din_num and din_mode regs.
      *
@@ -311,8 +368,12 @@ void spi_timing_enter_mspi_low_speed_mode(void)
     spi_timing_config_set_flash_clock(0, 4);
 
     clear_timing_tuning_regs();
+#else
+    //Empty function for compatibility, therefore upper layer won't need to know that FLASH in which operation mode and frequency config needs to be tuned
+#endif
 }
 
+#if SPI_TIMING_FLASH_NEEDS_TUNING || SPI_TIMING_PSRAM_NEEDS_TUNING
 static void set_timing_tuning_regs_as_required(void)
 {
     //SPI0 and SPI1 share the registers for flash din mode and num setting, so we only set SPI0's reg
@@ -323,6 +384,7 @@ static void set_timing_tuning_regs_as_required(void)
     spi_timing_config_psram_set_din_mode_num(0, s_psram_best_timing_tuning_config.spi_din_mode, s_psram_best_timing_tuning_config.spi_din_num);
     spi_timing_config_psram_set_extra_dummy(0, s_psram_best_timing_tuning_config.extra_dummy_len);
 }
+#endif  //#if SPI_TIMING_FLASH_NEEDS_TUNING || SPI_TIMING_PSRAM_NEEDS_TUNING
 
 /**
  * Set SPI0 and SPI1 flash module clock, din_num, din_mode and extra dummy,
@@ -332,6 +394,7 @@ static void set_timing_tuning_regs_as_required(void)
  */
 void spi_timing_enter_mspi_high_speed_mode(void)
 {
+#if SPI_TIMING_FLASH_NEEDS_TUNING || SPI_TIMING_PSRAM_NEEDS_TUNING
     spi_timing_config_core_clock_t core_clock = get_mspi_core_clock();
     uint32_t flash_div = get_flash_clock_divider();
     uint32_t psram_div = get_psram_clock_divider();
@@ -345,4 +408,7 @@ void spi_timing_enter_mspi_high_speed_mode(void)
     spi_timing_config_set_psram_clock(0, psram_div);
 
     set_timing_tuning_regs_as_required();
+#else
+    //Empty function for compatibility, therefore upper layer won't need to know that FLASH in which operation mode and frequency config needs to be tuned
+#endif
 }