Merge branch 'bugfix/esp32_hardware_mpi_fix_v5.0' into 'release/v5.0'

esp32: mpi: add workaround for data corruption issue observed with IDF 5.x toolchain (v5.0)

See merge request espressif/esp-idf!20819

components/mbedtls/port/esp32/bignum.c

@@ -67,7 +67,12 @@ void esp_mpi_interrupt_clear( void )
    these additional words will be zeroed in the memory buffer.
 
 */
-static inline void mpi_to_mem_block(uint32_t mem_base, const mbedtls_mpi *mpi, size_t hw_words)
+
+/* Please see detailed note inside the function body below.
+ * Relevant: https://github.com/espressif/esp-idf/issues/8710 and IDF-6029
+ */
+static inline void __attribute__((optimize("-fno-tree-loop-distribute-patterns")))
+            mpi_to_mem_block(uint32_t mem_base, const mbedtls_mpi *mpi, size_t hw_words)
 {
     uint32_t *pbase = (uint32_t *)mem_base;
     uint32_t copy_words = MIN(hw_words, mpi->MBEDTLS_PRIVATE(n));
@@ -81,6 +86,26 @@ static inline void mpi_to_mem_block(uint32_t mem_base, const mbedtls_mpi *mpi, s
     for (uint32_t i = copy_words; i < hw_words; i++) {
         pbase[i] = 0;
     }
+
+#if _INTERNAL_DEBUG_PURPOSE
+    /*
+     * With Xtensa GCC 11.2.0 (from ESP-IDF v5.x), it was observed that above zero initialization
+     * loop gets optimized to `memset` call from the ROM library. This was causing an issue that
+     * specific write (store) operation to the MPI peripheral block was getting lost erroneously.
+     * Following data re-verify loop could catch it during runtime.
+     *
+     * As a workaround, we are disabling loop distribute patterns for this function and hence
+     * compiler does not enforce usage of `memset` (or `memcpy`) calls for this routine. It
+     * appears that `-ftree-loop-distribute-patterns` was enabled with O2/Os starting from
+     * GCC-10.x. It is quite possible that there is some issue with DPORT write with sequence of
+     * store instructions as generated by `memset` call, but for now this should serve as good
+     * interim workaround without any impact on the performance.
+     *
+     * Please see IDF-6029 for more details.
+     */
+
+    //for (uint32_t i = copy_words; i < hw_words; i++) { assert(pbase[i] == 0); }
+#endif
 }
 
 /* Read mbedTLS MPI bignum back from hardware memory block.

components/mbedtls/port/esp_bignum.c

@@ -642,6 +642,13 @@ static int mpi_mult_mpi_failover_mod_mult( mbedtls_mpi *Z, const mbedtls_mpi *X,
     esp_mpi_read_result_hw_op(Z, hw_words);
 
     Z->MBEDTLS_PRIVATE(s) = X->MBEDTLS_PRIVATE(s) * Y->MBEDTLS_PRIVATE(s);
+    /*
+     * If this condition fails then most likely hardware peripheral
+     * has produced an incorrect result for MPI operation. This can
+     * happen if data fed to the peripheral register was incorrect.
+     * Relevant: https://github.com/espressif/esp-idf/issues/8710#issuecomment-1249178698
+     */
+    assert(mpi_words(Z) == z_words);
 cleanup:
     esp_mpi_disable_hardware_hw_op();
     return ret;