Merge branch 'bugfix/fix_ble_some_bugs_20221219_v4.4' into 'release/v4.4'

backport some BLE bugs 20221219 (backport v4.4)

See merge request espressif/esp-idf!21709

components/bt/controller/esp32/Kconfig.in

@@ -353,6 +353,22 @@ config BTDM_SCAN_DUPL_CACHE_SIZE
         Maximum number of devices which can be recorded in scan duplicate filter.
         When the maximum amount of device in the filter is reached, the cache will be refreshed.
 
+config BTDM_SCAN_DUPL_CACHE_REFRESH_PERIOD
+    int "Duplicate scan list refresh period (seconds)"
+    depends on BTDM_BLE_SCAN_DUPL
+    range 0 1000
+    default 0
+    help
+        If the period value is non-zero, the controller will periodically clear the device information
+        stored in the scan duuplicate filter. If it is 0, the scan duuplicate filter will not be cleared
+        until the scanning is disabled. Duplicate advertisements for this period should not be sent to the
+        Host in advertising report events.
+        There are two scenarios where the ADV packet will be repeatedly reported:
+        1. The duplicate scan cache is full, the controller will delete the oldest device information and
+        add new device information.
+        2. When the refresh period is up, the controller will clear all device information and start filtering
+        again.
+
 config BTDM_BLE_MESH_SCAN_DUPL_EN
     bool "Special duplicate scan mechanism for BLE Mesh scan"
     depends on BTDM_BLE_SCAN_DUPL

components/bt/controller/esp32/bt.c

@@ -324,6 +324,7 @@ static void *customer_queue_create_hlevel_wrapper(uint32_t queue_len, uint32_t i
 #endif /* CONFIG_BTDM_CTRL_HLI */
 static void IRAM_ATTR interrupt_l3_disable(void);
 static void IRAM_ATTR interrupt_l3_restore(void);
+static void bt_controller_deinit_internal(void);
 
 /* Local variable definition
  ***************************************************************************
@@ -1575,26 +1576,9 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
     return ESP_OK;
 
 error:
-#ifdef CONFIG_PM_ENABLE
+
-    if (!s_btdm_allow_light_sleep) {
+    bt_controller_deinit_internal();
-        if (s_light_sleep_pm_lock != NULL) {
+
-            esp_pm_lock_delete(s_light_sleep_pm_lock);
-            s_light_sleep_pm_lock = NULL;
-        }
-    }
-    if (s_pm_lock != NULL) {
-        esp_pm_lock_delete(s_pm_lock);
-        s_pm_lock = NULL;
-    }
-    if (s_btdm_slp_tmr != NULL) {
-        esp_timer_delete(s_btdm_slp_tmr);
-        s_btdm_slp_tmr = NULL;
-    }
-#endif
-    if (s_wakeup_req_sem) {
-        semphr_delete_wrapper(s_wakeup_req_sem);
-        s_wakeup_req_sem = NULL;
-    }
     return err;
 }
 
@@ -1606,6 +1590,13 @@ esp_err_t esp_bt_controller_deinit(void)
 
     btdm_controller_deinit();
 
+    bt_controller_deinit_internal();
+
+    return ESP_OK;
+}
+
+static void bt_controller_deinit_internal(void)
+{
     periph_module_disable(PERIPH_BT_MODULE);
 
 #ifdef CONFIG_PM_ENABLE
@@ -1627,11 +1618,16 @@ esp_err_t esp_bt_controller_deinit(void)
 
     s_pm_lock_acquired = false;
 #endif
-    semphr_delete_wrapper(s_wakeup_req_sem);
-    s_wakeup_req_sem = NULL;
 
-    free(osi_funcs_p);
+    if (s_wakeup_req_sem) {
-    osi_funcs_p = NULL;
+        semphr_delete_wrapper(s_wakeup_req_sem);
+        s_wakeup_req_sem = NULL;
+    }
+
+    if (osi_funcs_p) {
+        free(osi_funcs_p);
+        osi_funcs_p = NULL;
+    }
 
     btdm_controller_status = ESP_BT_CONTROLLER_STATUS_IDLE;
 
@@ -1641,8 +1637,6 @@ esp_err_t esp_bt_controller_deinit(void)
     esp_bt_power_domain_off();
 
     esp_phy_modem_deinit();
-
-    return ESP_OK;
 }
 
 static void bt_controller_shutdown(void* arg)

components/bt/controller/esp32c3/Kconfig.in

@@ -280,6 +280,22 @@ config BT_CTRL_SCAN_DUPL_CACHE_SIZE
         Maximum number of devices which can be recorded in scan duplicate filter.
         When the maximum amount of device in the filter is reached, the cache will be refreshed.
 
+config BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+    int "Duplicate scan list refresh period (seconds)"
+    depends on BT_CTRL_BLE_SCAN_DUPL
+    range 0 1000
+    default 0
+    help
+        If the period value is non-zero, the controller will periodically clear the device information
+        stored in the scan duuplicate filter. If it is 0, the scan duuplicate filter will not be cleared
+        until the scanning is disabled. Duplicate advertisements for this period should not be sent to the
+        Host in advertising report events.
+        There are two scenarios where the ADV packet will be repeatedly reported:
+        1. The duplicate scan cache is full, the controller will delete the oldest device information and
+        add new device information.
+        2. When the refresh period is up, the controller will clear all device information and start filtering
+        again.
+
 config BT_CTRL_BLE_MESH_SCAN_DUPL_EN
     bool "Special duplicate scan mechanism for BLE Mesh scan"
     depends on BT_CTRL_BLE_SCAN_DUPL

components/bt/controller/esp32c3/bt.c

@@ -313,6 +313,8 @@ static void btdm_slp_tmr_callback(void *arg);
 
 static esp_err_t try_heap_caps_add_region(intptr_t start, intptr_t end);
 
+static void bt_controller_deinit_internal(void);
+
 /* Local variable definition
  ***************************************************************************
  */
@@ -1271,73 +1273,9 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
     return ESP_OK;
 
 error:
-    if (s_lp_stat.phy_enabled) {
-        esp_phy_disable();
-        s_lp_stat.phy_enabled = 0;
-    }
 
-    do {
+    bt_controller_deinit_internal();
-        // deinit low power control resources
-#ifdef CONFIG_PM_ENABLE
-        if (s_lp_cntl.no_light_sleep) {
-            if (s_light_sleep_pm_lock != NULL) {
-                esp_pm_lock_delete(s_light_sleep_pm_lock);
-                s_light_sleep_pm_lock = NULL;
-            }
-        }
-        if (s_pm_lock != NULL) {
-            esp_pm_lock_delete(s_pm_lock);
-            s_pm_lock = NULL;
-            s_lp_stat.pm_lock_released = 0;
-        }
 
-#endif
-        if (s_lp_cntl.wakeup_timer_required && s_btdm_slp_tmr != NULL) {
-            esp_timer_delete(s_btdm_slp_tmr);
-            s_btdm_slp_tmr = NULL;
-        }
-
-#if CONFIG_MAC_BB_PD
-        if (s_lp_cntl.mac_bb_pd) {
-            btdm_deep_sleep_mem_deinit();
-            s_lp_cntl.mac_bb_pd = 0;
-        }
-#endif
-        if (s_lp_cntl.enable) {
-            btdm_vnd_offload_task_deregister(BTDM_VND_OL_SIG_WAKEUP_TMR);
-            if (s_wakeup_req_sem != NULL) {
-                semphr_delete_wrapper(s_wakeup_req_sem);
-                s_wakeup_req_sem = NULL;
-            }
-        }
-
-        if (s_lp_cntl.lpclk_sel == BTDM_LPCLK_SEL_XTAL) {
-#ifdef CONFIG_BT_CTRL_MAIN_XTAL_PU_DURING_LIGHT_SLEEP
-            if (s_lp_cntl.main_xtal_pu) {
-                ESP_ERROR_CHECK(esp_sleep_pd_config(ESP_PD_DOMAIN_XTAL, ESP_PD_OPTION_OFF));
-                s_lp_cntl.main_xtal_pu = 0;
-            }
-#endif
-            btdm_lpclk_select_src(BTDM_LPCLK_SEL_RTC_SLOW);
-            btdm_lpclk_set_div(0);
-#if CONFIG_SW_COEXIST_ENABLE
-            coex_update_lpclk_interval();
-#endif
-        }
-
-        btdm_lpcycle_us = 0;
-    } while (0);
-
-#if CONFIG_MAC_BB_PD
-    esp_unregister_mac_bb_pd_callback(btdm_mac_bb_power_down_cb);
-
-    esp_unregister_mac_bb_pu_callback(btdm_mac_bb_power_up_cb);
-#endif
-
-    if (osi_funcs_p != NULL) {
-        free(osi_funcs_p);
-        osi_funcs_p = NULL;
-    }
     return err;
 }
 
@@ -1348,31 +1286,47 @@ esp_err_t esp_bt_controller_deinit(void)
     }
 
     btdm_controller_deinit();
+
+    bt_controller_deinit_internal();
+
+    return ESP_OK;
+}
+
+static void bt_controller_deinit_internal(void)
+{
     periph_module_disable(PERIPH_BT_MODULE);
 
     if (s_lp_stat.phy_enabled) {
         esp_phy_disable();
         s_lp_stat.phy_enabled = 0;
-    } else {
-        assert(0);
     }
 
     // deinit low power control resources
     do {
+
 #if CONFIG_MAC_BB_PD
-        btdm_deep_sleep_mem_deinit();
+        if (s_lp_cntl.mac_bb_pd) {
+            btdm_deep_sleep_mem_deinit();
+            s_lp_cntl.mac_bb_pd = 0;
+        }
 #endif
 
 #ifdef CONFIG_PM_ENABLE
         if (s_lp_cntl.no_light_sleep) {
-            esp_pm_lock_delete(s_light_sleep_pm_lock);
+            if (s_light_sleep_pm_lock != NULL) {
-            s_light_sleep_pm_lock = NULL;
+                esp_pm_lock_delete(s_light_sleep_pm_lock);
+                s_light_sleep_pm_lock = NULL;
+            }
+        }
+
+        if (s_pm_lock != NULL) {
+            esp_pm_lock_delete(s_pm_lock);
+            s_pm_lock = NULL;
+            s_lp_stat.pm_lock_released = 0;
         }
 
-        esp_pm_lock_delete(s_pm_lock);
-        s_pm_lock = NULL;
-        s_lp_stat.pm_lock_released = 0;
 #endif
+
         if (s_lp_cntl.wakeup_timer_required) {
             if (s_lp_stat.wakeup_timer_started) {
                 esp_timer_stop(s_btdm_slp_tmr);
@@ -1384,10 +1338,12 @@ esp_err_t esp_bt_controller_deinit(void)
 
         if (s_lp_cntl.enable) {
             btdm_vnd_offload_task_deregister(BTDM_VND_OL_SIG_WAKEUP_TMR);
-
+            if (s_wakeup_req_sem != NULL) {
-            semphr_delete_wrapper(s_wakeup_req_sem);
+                semphr_delete_wrapper(s_wakeup_req_sem);
-            s_wakeup_req_sem = NULL;
+                s_wakeup_req_sem = NULL;
+            }
         }
+
         if (s_lp_cntl.lpclk_sel == BTDM_LPCLK_SEL_XTAL) {
 #ifdef CONFIG_BT_CTRL_MAIN_XTAL_PU_DURING_LIGHT_SLEEP
             if (s_lp_cntl.main_xtal_pu) {
@@ -1416,11 +1372,12 @@ esp_err_t esp_bt_controller_deinit(void)
 #endif
     esp_phy_modem_deinit();
 
-    free(osi_funcs_p);
+    if (osi_funcs_p != NULL) {
-    osi_funcs_p = NULL;
+        free(osi_funcs_p);
+        osi_funcs_p = NULL;
+    }
 
     btdm_controller_status = ESP_BT_CONTROLLER_STATUS_IDLE;
-    return ESP_OK;
 }
 
 esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode)

components/bt/controller/esp32s3/Kconfig.in

@@ -297,6 +297,22 @@ config BT_CTRL_SCAN_DUPL_CACHE_SIZE
         Maximum number of devices which can be recorded in scan duplicate filter.
         When the maximum amount of device in the filter is reached, the cache will be refreshed.
 
+config BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+    int "Duplicate scan list refresh period (seconds)"
+    depends on BT_CTRL_BLE_SCAN_DUPL
+    range 0 1000
+    default 0
+    help
+        If the period value is non-zero, the controller will periodically clear the device information
+        stored in the scan duuplicate filter. If it is 0, the scan duuplicate filter will not be cleared
+        until the scanning is disabled. Duplicate advertisements for this period should not be sent to the
+        Host in advertising report events.
+        There are two scenarios where the ADV packet will be repeatedly reported:
+        1. The duplicate scan cache is full, the controller will delete the oldest device information and
+        add new device information.
+        2. When the refresh period is up, the controller will clear all device information and start filtering
+        again.
+
 config BT_CTRL_BLE_MESH_SCAN_DUPL_EN
     bool "Special duplicate scan mechanism for BLE Mesh scan"
     depends on BT_CTRL_BLE_SCAN_DUPL

components/bt/controller/esp32s3/bt.c

@@ -317,6 +317,8 @@ static void btdm_slp_tmr_callback(void *arg);
 
 static esp_err_t try_heap_caps_add_region(intptr_t start, intptr_t end);
 
+static void bt_controller_deinit_internal(void);
+
 /* Local variable definition
  ***************************************************************************
  */
@@ -1317,73 +1319,9 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
     return ESP_OK;
 
 error:
-    if (s_lp_stat.phy_enabled) {
-        esp_phy_disable();
-        s_lp_stat.phy_enabled = 0;
-    }
 
-    do {
+    bt_controller_deinit_internal();
-        // deinit low power control resources
-#ifdef CONFIG_PM_ENABLE
-        if (s_lp_cntl.no_light_sleep) {
-            if (s_light_sleep_pm_lock != NULL) {
-                esp_pm_lock_delete(s_light_sleep_pm_lock);
-                s_light_sleep_pm_lock = NULL;
-            }
-        }
-        if (s_pm_lock != NULL) {
-            esp_pm_lock_delete(s_pm_lock);
-            s_pm_lock = NULL;
-            s_lp_stat.pm_lock_released = 0;
-        }
 
-#endif
-        if (s_lp_cntl.wakeup_timer_required && s_btdm_slp_tmr != NULL) {
-            esp_timer_delete(s_btdm_slp_tmr);
-            s_btdm_slp_tmr = NULL;
-        }
-
-#if CONFIG_MAC_BB_PD
-        if (s_lp_cntl.mac_bb_pd) {
-            btdm_deep_sleep_mem_deinit();
-            s_lp_cntl.mac_bb_pd = 0;
-        }
-#endif
-        if (s_lp_cntl.enable) {
-            btdm_vnd_offload_task_deregister(BTDM_VND_OL_SIG_WAKEUP_TMR);
-            if (s_wakeup_req_sem != NULL) {
-                semphr_delete_wrapper(s_wakeup_req_sem);
-                s_wakeup_req_sem = NULL;
-            }
-        }
-
-        if (s_lp_cntl.lpclk_sel == BTDM_LPCLK_SEL_XTAL) {
-#ifdef CONFIG_BT_CTRL_MAIN_XTAL_PU_DURING_LIGHT_SLEEP
-            if (s_lp_cntl.main_xtal_pu) {
-                ESP_ERROR_CHECK(esp_sleep_pd_config(ESP_PD_DOMAIN_XTAL, ESP_PD_OPTION_OFF));
-                s_lp_cntl.main_xtal_pu = 0;
-            }
-#endif
-            btdm_lpclk_select_src(BTDM_LPCLK_SEL_RTC_SLOW);
-            btdm_lpclk_set_div(0);
-#if CONFIG_SW_COEXIST_ENABLE
-            coex_update_lpclk_interval();
-#endif
-        }
-
-        btdm_lpcycle_us = 0;
-    } while (0);
-
-#if CONFIG_MAC_BB_PD
-    esp_unregister_mac_bb_pd_callback(btdm_mac_bb_power_down_cb);
-
-    esp_unregister_mac_bb_pu_callback(btdm_mac_bb_power_up_cb);
-#endif
-
-    if (osi_funcs_p != NULL) {
-        free(osi_funcs_p);
-        osi_funcs_p = NULL;
-    }
     return err;
 }
 
@@ -1394,31 +1332,47 @@ esp_err_t esp_bt_controller_deinit(void)
     }
 
     btdm_controller_deinit();
+
+    bt_controller_deinit_internal();
+
+    return ESP_OK;
+}
+
+static void bt_controller_deinit_internal(void)
+{
     periph_module_disable(PERIPH_BT_MODULE);
 
     if (s_lp_stat.phy_enabled) {
         esp_phy_disable();
         s_lp_stat.phy_enabled = 0;
-    } else {
-        assert(0);
     }
 
     // deinit low power control resources
     do {
+
 #if CONFIG_MAC_BB_PD
-        btdm_deep_sleep_mem_deinit();
+        if (s_lp_cntl.mac_bb_pd) {
+            btdm_deep_sleep_mem_deinit();
+            s_lp_cntl.mac_bb_pd = 0;
+        }
 #endif
 
 #ifdef CONFIG_PM_ENABLE
         if (s_lp_cntl.no_light_sleep) {
-            esp_pm_lock_delete(s_light_sleep_pm_lock);
+            if (s_light_sleep_pm_lock != NULL) {
-            s_light_sleep_pm_lock = NULL;
+                esp_pm_lock_delete(s_light_sleep_pm_lock);
+                s_light_sleep_pm_lock = NULL;
+            }
+        }
+
+        if (s_pm_lock != NULL) {
+            esp_pm_lock_delete(s_pm_lock);
+            s_pm_lock = NULL;
+            s_lp_stat.pm_lock_released = 0;
         }
 
-        esp_pm_lock_delete(s_pm_lock);
-        s_pm_lock = NULL;
-        s_lp_stat.pm_lock_released = 0;
 #endif
+
         if (s_lp_cntl.wakeup_timer_required) {
             if (s_lp_stat.wakeup_timer_started) {
                 esp_timer_stop(s_btdm_slp_tmr);
@@ -1430,9 +1384,10 @@ esp_err_t esp_bt_controller_deinit(void)
 
         if (s_lp_cntl.enable) {
             btdm_vnd_offload_task_deregister(BTDM_VND_OL_SIG_WAKEUP_TMR);
-
+            if (s_wakeup_req_sem != NULL) {
-            semphr_delete_wrapper(s_wakeup_req_sem);
+                semphr_delete_wrapper(s_wakeup_req_sem);
-            s_wakeup_req_sem = NULL;
+                s_wakeup_req_sem = NULL;
+            }
         }
 
         if (s_lp_cntl.lpclk_sel == BTDM_LPCLK_SEL_XTAL) {
@@ -1463,11 +1418,12 @@ esp_err_t esp_bt_controller_deinit(void)
 #endif
     esp_phy_modem_deinit();
 
-    free(osi_funcs_p);
+    if (osi_funcs_p != NULL) {
-    osi_funcs_p = NULL;
+        free(osi_funcs_p);
+        osi_funcs_p = NULL;
+    }
 
     btdm_controller_status = ESP_BT_CONTROLLER_STATUS_IDLE;
-    return ESP_OK;
 }
 
 esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode)

components/bt/include/esp32/include/esp_bt.h

@@ -50,7 +50,7 @@ extern "C" {
 
 #endif //CONFIG_BT_ENABLED
 
-#define ESP_BT_CONTROLLER_CONFIG_MAGIC_VAL  0x20200622
+#define ESP_BT_CONTROLLER_CONFIG_MAGIC_VAL  0x20221207
 
 /**
  * @brief Bluetooth mode for controller enable/disable
@@ -128,6 +128,12 @@ the adv packet will be discarded until the memory is restored. */
     #define MESH_DUPLICATE_SCAN_CACHE_SIZE          0
 #endif
 
+#ifdef CONFIG_BTDM_SCAN_DUPL_CACHE_REFRESH_PERIOD
+#define SCAN_DUPL_CACHE_REFRESH_PERIOD CONFIG_BTDM_SCAN_DUPL_CACHE_REFRESH_PERIOD
+#else
+#define SCAN_DUPL_CACHE_REFRESH_PERIOD              0
+#endif
+
 #if defined(CONFIG_BTDM_CTRL_MODE_BLE_ONLY)
 #define BTDM_CONTROLLER_MODE_EFF                    ESP_BT_MODE_BLE
 #elif defined(CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY)
@@ -183,6 +189,7 @@ the adv packet will be discarded until the memory is restored. */
     .pcm_role = CONFIG_BTDM_CTRL_PCM_ROLE_EFF,                             \
     .pcm_polar = CONFIG_BTDM_CTRL_PCM_POLAR_EFF,                           \
     .hli = BTDM_CTRL_HLI,                                                  \
+    .dup_list_refresh_period = SCAN_DUPL_CACHE_REFRESH_PERIOD,             \
     .magic = ESP_BT_CONTROLLER_CONFIG_MAGIC_VAL,                           \
 }
 
@@ -225,6 +232,7 @@ typedef struct {
     uint8_t pcm_role;                       /*!< PCM role (master & slave)*/
     uint8_t pcm_polar;                      /*!< PCM polar trig (falling clk edge & rising clk edge) */
     bool hli;                               /*!< Using high level interrupt or not */
+    uint16_t dup_list_refresh_period;       /*!< Duplicate scan list refresh period */
     uint32_t magic;                         /*!< Magic number */
 } esp_bt_controller_config_t;
 

components/bt/include/esp32c3/include/esp_bt.h

@@ -19,7 +19,7 @@ extern "C" {
 #endif
 
 #define ESP_BT_CTRL_CONFIG_MAGIC_VAL    0x5A5AA5A5
-#define ESP_BT_CTRL_CONFIG_VERSION      0x02209230
+#define ESP_BT_CTRL_CONFIG_VERSION      0x02212090
 
 #define ESP_BT_HCI_TL_MAGIC_VALUE   0xfadebead
 #define ESP_BT_HCI_TL_VERSION       0x00010000
@@ -130,6 +130,12 @@ typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status);
     #define MESH_DUPLICATE_SCAN_CACHE_SIZE          0
 #endif
 
+#ifndef CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+#define DUPL_SCAN_CACHE_REFRESH_PERIOD 0
+#else
+#define DUPL_SCAN_CACHE_REFRESH_PERIOD CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+#endif
+
 #ifdef CONFIG_BT_CTRL_AGC_RECORRECT_EN
 #define BT_CTRL_AGC_RECORRECT_EN  CONFIG_BT_CTRL_AGC_RECORRECT_EN
 #else
@@ -189,6 +195,7 @@ typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status);
     .hw_recorrect_en = AGC_RECORRECT_EN,                                   \
     .cca_thresh = CONFIG_BT_CTRL_HW_CCA_VAL,                               \
     .scan_backoff_upperlimitmax = BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX,      \
+    .dup_list_refresh_period = DUPL_SCAN_CACHE_REFRESH_PERIOD,             \
 }
 
 #else
@@ -257,6 +264,7 @@ typedef struct {
     uint8_t hw_recorrect_en;
     uint8_t cca_thresh;                     /*!< cca threshold*/
     uint16_t scan_backoff_upperlimitmax;    /*!< scan backoff upperlimitmax value */
+    uint16_t dup_list_refresh_period;       /*!< duplicate scan list refresh time */
 } esp_bt_controller_config_t;
 
 /**

components/bt/include/esp32s3/include/esp_bt.h

@@ -19,7 +19,7 @@ extern "C" {
 #endif
 
 #define ESP_BT_CTRL_CONFIG_MAGIC_VAL    0x5A5AA5A5
-#define ESP_BT_CTRL_CONFIG_VERSION      0x02209230
+#define ESP_BT_CTRL_CONFIG_VERSION      0x02212090
 
 #define ESP_BT_HCI_TL_MAGIC_VALUE   0xfadebead
 #define ESP_BT_HCI_TL_VERSION       0x00010000
@@ -130,6 +130,12 @@ typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status);
     #define MESH_DUPLICATE_SCAN_CACHE_SIZE          0
 #endif
 
+#ifndef CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+#define DUPL_SCAN_CACHE_REFRESH_PERIOD 0
+#else
+#define DUPL_SCAN_CACHE_REFRESH_PERIOD CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD
+#endif
+
 #ifdef CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX
 #define BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX
 #else
@@ -188,6 +194,7 @@ typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status);
     .hw_recorrect_en = AGC_RECORRECT_EN,                                   \
     .cca_thresh = CONFIG_BT_CTRL_HW_CCA_VAL,                               \
     .scan_backoff_upperlimitmax = BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX,      \
+    .dup_list_refresh_period = DUPL_SCAN_CACHE_REFRESH_PERIOD,             \
 }
 
 #else
@@ -256,6 +263,7 @@ typedef struct {
     uint8_t hw_recorrect_en;
     uint8_t cca_thresh;                     /*!< cca threshold*/
     uint16_t scan_backoff_upperlimitmax;    /*!< scan backoff upperlimitmax value */
+    uint16_t dup_list_refresh_period;       /*!< duplicate scan list refresh time */
 } esp_bt_controller_config_t;
 
 /**