feat(ble): added ble log console for ble log uhci out

examples/bluetooth/bluedroid/ble/gatt_client/main/gattc_demo.c

@@ -541,8 +541,8 @@ void app_main(void)
     * This code is intended for debugging and prints all HCI data.
     * To enable it, turn on the "BT_HCI_LOG_DEBUG_EN" configuration option.
     * The output HCI data can be parsed using the script:
-    * esp-idf/tools/bt/bt_hci_to_btsnoop.py.
+    * esp-idf/tools/bt/bt_hci_to_btsnoop/bt_hci_to_btsnoop.py.
-    * For detailed instructions, refer to esp-idf/tools/bt/README.md.
+    * For detailed instructions, refer to esp-idf/tools/bt/bt_hci_to_btsnoop/README.md.
     */
 
     /*

tools/bt/ble_log_console/README.md

@@ -0,0 +1,31 @@
+# BLE Log Console
+
+## Introduction
+
+BLE Log Console is a Python utility for capturing and displaying BLE logs from UART DMA output, which is able to 
+
+- Output normal ASCII logs to console in runtime
+- Capture binary BLE logs from UART DMA output in background
+- Live status panel showing data transfer statistics
+- Automatic detection of frame loss
+
+It would provide users and developers with convenience using this tool when `CONFIG_BT_BLE_LOG_UHCI_OUT_ENABLED` is enabled for the purpose of capturing BLE logs.
+
+## Usage
+
+```bash
+cd <esp-idf-path>
+. ./export.sh
+cd tools/bt/ble_log_console
+python ble_log_console.py --port <UART_PORT> [--output <OUTPUT_FILE>] [--baudrate <BAUD_RATE>]
+```
+
+### Notes
+
+Please check the baud rate of the UART port in menuconfig `CONFIG_BT_BLE_LOG_UHCI_OUT_ENABLED` is enabled. It's recommended to set the baud rate to 921600 or higher to avoid BLE log frame loss.
+
+### Arguments
+
+- `--port` (mandatory): The UART port to connect to (e.g., `/dev/ttyUSB0` on Linux or `COM3` on Windows)
+- `--output` (optional): Output filename for binary capture (default: `uart_data.bin`)
+- `--baudrate` (optional): Baud rate for UART communication (default: `115200`)

tools/bt/ble_log_console/ble_log_console.py

@@ -0,0 +1,225 @@
+# SPDX-FileCopyrightText: 2025 Espressif Systems (Shanghai) CO LTD
+# SPDX-License-Identifier: Apache-2.0
+import argparse
+import struct
+import sys
+import time
+
+import serial
+import serial.tools.list_ports
+from rich.align import Align
+from rich.console import Console
+from rich.live import Live
+from rich.panel import Panel
+from rich.table import Table
+
+# Constants
+UART_READ_TIMEOUT = 0.1
+UART_BLOCK_SIZE = 1024 * 1024
+UART_BITS_PER_BYTE = 10
+
+FRAME_HEADER_SIZE = 6
+FRAME_TAIL_SIZE = 4
+FRAME_OVERHEAD_SIZE = FRAME_HEADER_SIZE + FRAME_TAIL_SIZE
+
+LOSS_FRAME_SOURCE_CODE = 0xFF
+LOSS_FRAME_LEN = 7
+
+
+def format_speed(bps: float) -> str:
+    if bps < 1_000:
+        return f'{bps:.1f} bps'
+    elif bps < 1_000_000:
+        return f'{bps / 1_000:.1f} kbps'
+    else:
+        return f'{bps / 1_000_000:.2f} Mbps'
+
+
+def format_byte_cnt(cnt: int) -> str:
+    if cnt < 1024:
+        return f'{cnt} B'
+    elif cnt < 1024 * 1024:
+        return f'{cnt / 1024:.1f} KB'
+    else:
+        return f'{cnt / 1024 / 1024:.2f} MB'
+
+
+def list_serial_ports() -> list[str]:
+    """List all available serial ports"""
+    ports = serial.tools.list_ports.comports()
+    return [port.device for port in ports]
+
+
+class BLELogConsole:
+    def __init__(self, port: str):
+        if not self.validate_uart_port(port):
+            sys.exit(1)
+
+        self.port = port
+        self.remained = b''
+        self.last_time = time.time()
+        self.console = Console()
+        self.str_tmp = ''
+        self.rx_bytes = 0
+        self.lost_frames = 0
+        self.lost_bytes = 0
+        self.max_bps = 0.0
+
+    def validate_uart_port(self, port: str) -> bool:
+        """Validate if UART port exists and is accessible"""
+        # First check if port exists in the system
+        available_ports = list_serial_ports()
+        if port not in available_ports:
+            self.console.print(f"Error: UART port '{port}' does not exist or is not accessible")
+            self.console.print(f'Available ports: {available_ports}')
+            return False
+
+        # Try to open port to confirm accessibility
+        try:
+            ser = serial.Serial(port, baudrate=115200, timeout=UART_READ_TIMEOUT)
+            ser.close()
+            return True
+        except Exception as e:
+            self.console.print(f"Error: Cannot access UART port '{port}': {str(e)}")
+            return False
+
+    def loss_frame_to_console(self, payload: bytes) -> None:
+        if len(payload) != LOSS_FRAME_LEN:
+            return
+
+        _, lost_frame_cnt, lost_bytes_cnt = struct.unpack('<BHI', payload)
+        self.lost_frames += lost_frame_cnt
+        self.lost_bytes += lost_bytes_cnt
+        self.console.print(f'[yellow][WARNING][/yellow] BLE Log lost {lost_frame_cnt} frames, {lost_bytes_cnt} bytes')
+
+    def ascii_to_console(self, data: bytes) -> None:
+        try:
+            decoded = data.decode('ascii')
+        except UnicodeDecodeError:
+            return
+
+        if decoded == '\n':
+            self.console.print(self.str_tmp, emoji=False)
+            self.str_tmp = ''
+        else:
+            self.str_tmp += decoded
+
+    def handle_data_block(self, block: bytes) -> None:
+        # Concatenate remained data with input block
+        full_data = self.remained + block
+        offset = 0
+        while offset + FRAME_OVERHEAD_SIZE <= len(full_data):
+            payload_offset = offset + FRAME_HEADER_SIZE
+
+            # Check if we have enough data for header
+            if payload_offset > len(full_data):
+                break
+
+            header = full_data[offset:payload_offset]
+            payload_len, source_code, _, _ = struct.unpack_from('<HBBH', header)
+            if payload_len > len(full_data):
+                self.ascii_to_console(bytes([full_data[offset]]))
+                offset += 1
+                continue
+
+            frame_len = payload_len + FRAME_OVERHEAD_SIZE
+            if offset + frame_len > len(full_data):
+                break
+
+            # Verify checksum
+            checksum_offset = payload_offset + payload_len
+            checksum_val = struct.unpack_from('<I', full_data, checksum_offset)[0]
+
+            payload = full_data[payload_offset:checksum_offset]
+            checksum_cal = sum(header + payload)
+            if checksum_cal != checksum_val:
+                self.ascii_to_console(bytes([full_data[offset]]))
+                offset += 1
+                continue
+
+            # Warn frame loss
+            if source_code == LOSS_FRAME_SOURCE_CODE:
+                self.loss_frame_to_console(payload)
+
+            # Update offset
+            offset += frame_len
+
+        # Update remained
+        self.remained = full_data[offset:] if offset < len(full_data) else b''
+
+    def build_status_panel(self, curr_rx_bytes: int) -> Panel:
+        # Update time info
+        now = time.perf_counter()
+        elapsed = now - self.last_time
+        self.last_time = now
+
+        # Update rx bytes
+        self.rx_bytes += curr_rx_bytes
+        rx_bytes_str = format_byte_cnt(self.rx_bytes)
+
+        # Calculate transport speed
+        bps = curr_rx_bytes * UART_BITS_PER_BYTE / elapsed if elapsed > 0.0 else 0.0
+        self.max_bps = bps if bps > self.max_bps else self.max_bps
+        speed_str = format_speed(bps)
+        max_speed_str = format_speed(self.max_bps)
+
+        # Prepare render table
+        line = Table.grid(padding=(0, 2), expand=True)
+        for _ in range(4):
+            line.add_column()
+
+        line.add_row(
+            f'[green]Received:[/green] {rx_bytes_str}',
+            f'[cyan]Speed:[/cyan] {speed_str}',
+            f'[cyan]Max Speed:[/cyan] {max_speed_str}',
+            f'[yellow]Lost:[/yellow] {self.lost_frames} frames, {self.lost_bytes} bytes',
+        )
+
+        return Panel(
+            Align(line, align='left'),
+            padding=(0, 1),
+            style='dim',
+            border_style='bright_blue',
+            title='BLE Log Status',
+            title_align='left',
+        )
+
+    def start_uart_transport(self, baudrate: int, output_filename: str) -> None:
+        try:
+            with (
+                serial.Serial(self.port, baudrate=baudrate, timeout=UART_READ_TIMEOUT) as ser,
+                open(output_filename, 'wb') as f,
+                Live(self.build_status_panel(0), console=self.console, refresh_per_second=4) as live,
+            ):
+                self.console.print(f'Starting UART transport from {self.port} to {output_filename}')
+                while True:
+                    # Transport
+                    block = ser.read(UART_BLOCK_SIZE)
+                    if block:
+                        self.handle_data_block(block)
+                        live.update(self.build_status_panel(len(block)))
+                        f.write(block)
+                        f.flush()
+        except KeyboardInterrupt:
+            self.console.print('\nUART transport stopped by user')
+        except Exception as e:
+            self.console.print('Error: Exception occurred while transporting UART stream')
+            self.console.print(e)
+
+        self.console.print(f'[green]UART stream is saved to {output_filename}[/green]')
+
+
+def main() -> None:
+    parser = argparse.ArgumentParser(description='BLE Log Console Helper')
+    parser.add_argument('--port', required=True, help='UART port to connect (e.g., /dev/ttyUSB0)')
+    parser.add_argument('--output', default='uart_data.bin', help='Output filename (default: uart_data.bin)')
+    parser.add_argument('--baudrate', type=int, default=115200, help='Baud rate (default: 115200)')
+
+    args = parser.parse_args()
+
+    ble_log_console = BLELogConsole(args.port)
+    ble_log_console.start_uart_transport(args.baudrate, args.output)
+
+
+if __name__ == '__main__':
+    main()

tools/bt/bt_hci_to_btsnoop/bt_hci_to_btsnoop.py

@@ -46,7 +46,7 @@ def parse_log(input_path: str, output_tag: str, has_timestamp: bool = True) -> N
     output_file = os.path.join(output_dir, f'parsed_log_{output_tag}.btsnoop.log')
     parsed_num = 0
     all_line_num = 0
-    with open(input_path, 'r', encoding='utf-8') as infile:
+    with open(input_path, encoding='utf-8') as infile:
         for line in infile:
             try:
                 all_line_num += 1

tools/ci/exclude_check_tools_files.txt

@@ -1,6 +1,5 @@
 tools/ble/**/*
-tools/bt/README.md
+tools/bt/**/*
-tools/bt/bt_hci_to_btsnoop.py
 tools/catch/**/*
 tools/check_term.py
 tools/ci/*exclude*.txt