fix(rmt): correct the condition for warnings in loop mode

components/esp_driver_rmt/src/rmt_tx.c

@@ -648,20 +648,22 @@ size_t rmt_encode_check_result(rmt_tx_channel_t *tx_chan, rmt_tx_trans_desc_t *t
     rmt_encode_state_t encode_state = RMT_ENCODING_RESET;
     rmt_encoder_handle_t encoder = t->encoder;
     size_t encoded_symbols = encoder->encode(encoder, &tx_chan->base, t->payload, t->payload_bytes, &encode_state);
+    bool is_mem_full = encode_state & RMT_ENCODING_MEM_FULL;
+    bool need_eof_mark = (encode_state & RMT_ENCODING_WITH_EOF) == 0;
 
     if (encode_state & RMT_ENCODING_COMPLETE) {
-        bool need_eof_mark = (encode_state & RMT_ENCODING_WITH_EOF) == 0;
         // inserting EOF symbol if there's extra space
-        if (!(encode_state & RMT_ENCODING_MEM_FULL)) {
+        if (!is_mem_full) {
             encoded_symbols += rmt_tx_mark_eof(tx_chan, need_eof_mark);
         }
         t->flags.encoding_done = true;
         t->flags.need_eof_mark = need_eof_mark;
     }
 
-    // for loop transaction, the memory block should accommodate all encoded RMT symbols
+    // for loop transaction, the memory block should accommodate all encoded RMT symbols and an extra EOF symbol
     if (t->loop_count != 0) {
-        if (unlikely(encoded_symbols > tx_chan->base.mem_block_num * SOC_RMT_MEM_WORDS_PER_CHANNEL)) {
+        size_t limit_symbols = tx_chan->base.mem_block_num * SOC_RMT_MEM_WORDS_PER_CHANNEL;
+        if (unlikely(encoded_symbols > limit_symbols || (encoded_symbols == limit_symbols && is_mem_full && need_eof_mark))) {
             ESP_DRAM_LOGE(TAG, "encoding artifacts can't exceed hw memory block for loop transmission");
         }
     }

docs/en/api-reference/peripherals/rmt.rst

@@ -256,7 +256,7 @@ Once you created an encoder, you can initiate a TX transaction by calling :cpp:f
 
 .. note::
 
-    There is a limitation in the transmission size if the :cpp:member:`rmt_transmit_config_t::loop_count` is set to non-zero, i.e., to enable the loop feature. The encoded RMT symbols should not exceed the capacity of the RMT hardware memory block size, or you might see an error message like ``encoding artifacts can't exceed hw memory block for loop transmission``. If you have to start a large transaction by loop, you can try either of the following methods.
+    There is a limitation in the transmission size if the :cpp:member:`rmt_transmit_config_t::loop_count` is set to non-zero, i.e., to enable the loop feature. The total amount of symbols returned by the encoder should not exceed the capacity of :c:macro:`SOC_RMT_MEM_WORDS_PER_CHANNEL`, or you might see an error message like ``encoding artifacts can't exceed hw memory block for loop transmission``. If you have to start a large transaction by loop, you can try either of the following methods.
 
     - Increase the :cpp:member:`rmt_tx_channel_config_t::mem_block_symbols`. This approach does not work if the DMA backend is also enabled.
     - Customize an encoder and construct an infinite loop in the encoding function. See also :ref:`rmt-rmt-encoder`.

docs/zh_CN/api-reference/peripherals/rmt.rst

@@ -256,7 +256,7 @@ RMT 是一种特殊的通信外设，无法像 SPI 和 I2C 那样发送原始字
 
 .. note::
 
-    如果将 :cpp:member:`rmt_transmit_config_t::loop_count` 设置为非零值，即启用循环功能，则传输的大小将受到限制。编码的 RMT 符号不应超过 RMT 硬件内存块容量，否则会出现类似 ``encoding artifacts can't exceed hw memory block for loop transmission`` 的报错信息。如需通过循环启动大型事务，请尝试以下任一方法：
+    如果将 :cpp:member:`rmt_transmit_config_t::loop_count` 设置为非零值，即启用循环功能，则传输的大小将受到限制。编码器返回的符号总量不能超过 :c:macro:`SOC_RMT_MEM_WORDS_PER_CHANNEL`，否则会出现类似 ``encoding artifacts can't exceed hw memory block for loop transmission`` 的报错信息。如需通过循环启动大型事务，请尝试以下任一方法：
 
     - 增加 :cpp:member:`rmt_tx_channel_config_t::mem_block_symbols`。若此时启用了 DMA 后端，该方法将失效。
     - 自定义编码器，并在编码函数中构造一个无限循环，详情请参阅 :ref:`rmt-rmt-encoder`。