diff --git a/components/spi_flash/test/test_esp_flash.c b/components/spi_flash/test/test_esp_flash.c
index 3d65572488..ce1151dd20 100644
--- a/components/spi_flash/test/test_esp_flash.c
+++ b/components/spi_flash/test/test_esp_flash.c
@@ -157,6 +157,15 @@ typedef void (*flash_test_func_t)(const esp_partition_t *part);
 #endif // !CONFIG_IDF_TARGET_ESP32C3
 #endif //CONFIG_SPIRAM
 
+#if SOC_CCOMP_TIMER_SUPPORTED
+#define TEST_FLASH_PERFORMANCE_CCOMP_GREATER_THAN(name, value, chip) \
+    printf("[Performance][" PERFORMANCE_STR(name) "]: %d, flash_chip: %s\n", value, chip);\
+    _TEST_PERFORMANCE_ASSERT(value > PERFORMANCE_CON(IDF_PERFORMANCE_MIN_, name));
+#else
+#define TEST_FLASH_PERFORMANCE_CCOMP_GREATER_THAN(name, value, chip) \
+    printf("[Performance][" PERFORMANCE_STR(name) "]: %d, flash_chip: %s\n", value, chip);
+#endif //SOC_CCOMP_TIMER_SUPPORTED
+
 //currently all the configs are the same with esp_flash_spi_device_config_t, no more information required
 typedef esp_flash_spi_device_config_t flashtest_config_t;
 
@@ -1048,6 +1057,37 @@ static uint32_t measure_read(const char* name, const esp_partition_t* part, uint
     return time_measure_end(&time_ctx);
 }
 
+static const char* get_chip_vendor(uint32_t id)
+{
+    switch (id)
+    {
+    case 0x20:
+        return "XMC";
+        break;
+    case 0x68:
+        return "BOYA";
+        break;
+    case 0xC8:
+        return "GigaDevice";
+        break;
+    case 0x9D:
+        return "ISSI";
+        break;
+    case 0xC2:
+        return "MXIC";
+        break;
+    case 0xEF:
+        return "Winbond";
+        break;
+    case 0xA1:
+        return "Fudan Micro";
+        break;
+    default:
+        break;
+    }
+    return "generic";
+}
+
 #define MEAS_WRITE(n)   (measure_write("write in "#n"-byte chunks", part, data_to_write, n))
 #define MEAS_READ(n)    (measure_read("read in "#n"-byte chunks", part, data_read, n))
 
@@ -1073,36 +1113,39 @@ static void test_flash_read_write_performance(const esp_partition_t *part)
     TEST_ASSERT_EQUAL_HEX8_ARRAY(data_to_write, data_read, total_len);
 
 #if !CONFIG_SPIRAM && !CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE
-#  define CHECK_DATA(bus, suffix) TEST_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_##bus##suffix, "%d", speed_##suffix)
-#  define CHECK_ERASE(bus, var) TEST_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_##bus##ERASE, "%d", var)
+#  define CHECK_DATA(bus, suffix, chip) TEST_FLASH_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_##bus##suffix, speed_##suffix, chip)
+#  define CHECK_ERASE(bus, var, chip) TEST_FLASH_PERFORMANCE_CCOMP_GREATER_THAN(FLASH_SPEED_BYTE_PER_SEC_##bus##ERASE, var, chip)
 #else
-#  define CHECK_DATA(bus, suffix) ((void)speed_##suffix)
-#  define CHECK_ERASE(bus, var)   ((void)var)
+#  define CHECK_DATA(bus, suffix, chip) ((void)speed_##suffix);((void)chip)
+#  define CHECK_ERASE(bus, var, chip)   ((void)var);((void)chip)
 #endif
 
 // Erase time may vary a lot, can increase threshold if this fails with a reasonable speed
-#define CHECK_PERFORMANCE(bus) do {\
-            CHECK_DATA(bus, WR_4B); \
-            CHECK_DATA(bus, RD_4B); \
-            CHECK_DATA(bus, WR_2KB); \
-            CHECK_DATA(bus, RD_2KB); \
-            CHECK_ERASE(bus, erase_1); \
-            CHECK_ERASE(bus, erase_2); \
+#define CHECK_PERFORMANCE(bus, chip) do {\
+            CHECK_DATA(bus, WR_4B, chip); \
+            CHECK_DATA(bus, RD_4B, chip); \
+            CHECK_DATA(bus, WR_2KB, chip); \
+            CHECK_DATA(bus, RD_2KB, chip); \
+            CHECK_ERASE(bus, erase_1, chip); \
+            CHECK_ERASE(bus, erase_2, chip); \
         } while (0)
 
     spi_host_device_t host_id;
     int cs_id;
+    uint32_t id;
+    esp_flash_read_id(chip, &id);
+    const char *chip_name = get_chip_vendor(id >> 16);
 
     get_chip_host(chip, &host_id, &cs_id);
     if (host_id != SPI1_HOST) {
         // Chips on other SPI buses
-        CHECK_PERFORMANCE(EXT_);
+        CHECK_PERFORMANCE(EXT_, chip_name);
     } else if (cs_id == 0) {
         // Main flash
-        CHECK_PERFORMANCE();
+        CHECK_PERFORMANCE(,chip_name);
     } else {
         // Other cs pins on SPI1
-        CHECK_PERFORMANCE(SPI1_);
+        CHECK_PERFORMANCE(SPI1_, chip_name);
     }
     free(data_to_write);
     free(data_read);
diff --git a/tools/ci/python_packages/ttfw_idf/IDFDUT.py b/tools/ci/python_packages/ttfw_idf/IDFDUT.py
index 6fb3686185..29213addca 100644
--- a/tools/ci/python_packages/ttfw_idf/IDFDUT.py
+++ b/tools/ci/python_packages/ttfw_idf/IDFDUT.py
@@ -32,6 +32,7 @@ except ImportError:
 
 from serial.tools import list_ports
 from tiny_test_fw import DUT, Utility
+from tiny_test_fw.Utility import format_case_id
 
 try:
     import esptool
@@ -70,7 +71,7 @@ class IDFRecvThread(DUT.RecvThread):
     def collect_performance(self, comp_data):
         matches = self.PERFORMANCE_PATTERN.findall(comp_data)
         for match in matches:
-            Utility.console_log('[Performance][{}]: {}'.format(match[0], match[1]),
+            Utility.console_log('[Performance][{}]: {}'.format(format_case_id(match[0], self.dut.app.target, self.dut.app.config_name), match[1]),
                                 color='orange')
             self.performance_items.put((match[0], match[1]))