Update bt lib for ESP32-C3 and ESP32-S3(ff6efe7)

- fix(bt/controller): Fixed PHY enable and disable
- feat(bt/controller): Support DAA and LBT mode for BLE CCA

components/bt/controller/esp32c3/Kconfig.in

@@ -78,15 +78,29 @@ config BT_CTRL_ADV_DUP_FILT_MAX
     help
         The maxinum number of suplicate scan filter
 
-config BT_CTRL_HW_CCA
-    bool "HW CCA check enable"
-    default n
+choice BT_BLE_CCA_MODE
+    prompt "BLE CCA mode"
+    default BT_BLE_CCA_MODE_NONE
     help
-        It enables HW CCA feature in controller
+        Define BT BLE CCA mode
+
+    config BT_BLE_CCA_MODE_NONE
+        bool "NONE"
+    config BT_BLE_CCA_MODE_HW
+        bool "Hardware"
+    config BT_BLE_CCA_MODE_SW
+        bool "Software"
+endchoice
+
+config BT_BLE_CCA_MODE
+    int
+    default 0 if BT_BLE_CCA_MODE_NONE
+    default 1 if BT_BLE_CCA_MODE_HW
+    default 2 if BT_BLE_CCA_MODE_SW
 
 config BT_CTRL_HW_CCA_VAL
     int "CCA threshold value"
-    range 20 60
+    range 20 100
     default 20
     help
         It is the threshold value of HW CCA, if the value is 30, it means CCA threshold is -30 dBm.

components/bt/controller/esp32c3/bt.c

@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -112,7 +112,7 @@ do{\
 } while(0)
 
 #define OSI_FUNCS_TIME_BLOCKING  0xffffffff
-#define OSI_VERSION              0x00010006
+#define OSI_VERSION              0x00010007
 #define OSI_MAGIC_VALUE          0xFADEBEAD
 
 /* Types definition
@@ -193,6 +193,8 @@ struct osi_funcs_t {
     void (* _esp_hw_power_down)(void);
     void (* _esp_hw_power_up)(void);
     void (* _ets_backup_dma_copy)(uint32_t reg, uint32_t mem_addr, uint32_t num, bool to_rem);
+    void (* _ets_delay_us)(uint32_t us);
+    void (* _btdm_rom_table_ready)(void);
 };
 
 
@@ -251,6 +253,8 @@ extern void esp_mac_bb_power_up(void);
 extern void ets_backup_dma_copy(uint32_t reg, uint32_t mem_addr, uint32_t num, bool to_mem);
 #endif
 
+extern void btdm_cca_feature_enable(void);
+
 extern uint32_t _bt_bss_start;
 extern uint32_t _bt_bss_end;
 extern uint32_t _btdm_bss_start;
@@ -310,6 +314,7 @@ static void interrupt_off_wrapper(int intr_num);
 static void btdm_hw_mac_power_up_wrapper(void);
 static void btdm_hw_mac_power_down_wrapper(void);
 static void btdm_backup_dma_copy_wrapper(uint32_t reg, uint32_t mem_addr, uint32_t num,  bool to_mem);
+static void btdm_funcs_table_ready_wrapper(void);
 
 static void btdm_slp_tmr_callback(void *arg);
 
@@ -374,6 +379,8 @@ static const struct osi_funcs_t osi_funcs_ro = {
     ._esp_hw_power_down = btdm_hw_mac_power_down_wrapper,
     ._esp_hw_power_up = btdm_hw_mac_power_up_wrapper,
     ._ets_backup_dma_copy = btdm_backup_dma_copy_wrapper,
+    ._ets_delay_us = esp_rom_delay_us,
+    ._btdm_rom_table_ready = btdm_funcs_table_ready_wrapper,
 };
 
 static DRAM_ATTR struct osi_funcs_t *osi_funcs_p;
@@ -871,6 +878,13 @@ static void async_wakeup_request_end(int event)
     return;
 }
 
+static void btdm_funcs_table_ready_wrapper(void)
+{
+#if BT_BLE_CCA_MODE == 2
+    btdm_cca_feature_enable();
+#endif
+}
+
 static void coex_schm_status_bit_set_wrapper(uint32_t type, uint32_t status)
 {
 #if CONFIG_SW_COEXIST_ENABLE
@@ -1299,14 +1313,10 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
     periph_module_enable(PERIPH_BT_MODULE);
     periph_module_reset(PERIPH_BT_MODULE);
 
-    esp_phy_enable();
-    s_lp_stat.phy_enabled = 1;
-
     if (btdm_controller_init(cfg) != 0) {
         err = ESP_ERR_NO_MEM;
         goto error;
     }
-    coex_pti_v2();
 
     btdm_controller_status = ESP_BT_CONTROLLER_STATUS_INITED;
 
@@ -1336,11 +1346,6 @@ static void bt_controller_deinit_internal(void)
 {
     periph_module_disable(PERIPH_BT_MODULE);
 
-    if (s_lp_stat.phy_enabled) {
-        esp_phy_disable();
-        s_lp_stat.phy_enabled = 0;
-    }
-
     // deinit low power control resources
     do {
 
@@ -1434,6 +1439,12 @@ esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode)
         return ESP_ERR_INVALID_ARG;
     }
 
+    /* Enable PHY when enabling controller to reduce power dissipation after controller init
+     * Notice the init order: esp_phy_enable() -> bt_bb_v2_init_cmplx() -> coex_pti_v2()
+     */
+    esp_phy_enable();
+    s_lp_stat.phy_enabled = 1;
+
 #if CONFIG_SW_COEXIST_ENABLE
     coex_enable();
 #endif
@@ -1458,6 +1469,8 @@ esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode)
         goto error;
     }
 
+    coex_pti_v2();
+
     btdm_controller_status = ESP_BT_CONTROLLER_STATUS_ENABLED;
 
     return ret;
@@ -1480,6 +1493,10 @@ error:
 #if CONFIG_SW_COEXIST_ENABLE
     coex_disable();
 #endif
+    if (s_lp_stat.phy_enabled) {
+        esp_phy_disable();
+        s_lp_stat.phy_enabled = 0;
+    }
     return ret;
 }
 
@@ -1498,6 +1515,10 @@ esp_err_t esp_bt_controller_disable(void)
 #if CONFIG_SW_COEXIST_ENABLE
     coex_disable();
 #endif
+    if (s_lp_stat.phy_enabled) {
+        esp_phy_disable();
+        s_lp_stat.phy_enabled = 0;
+    }
 
     btdm_controller_status = ESP_BT_CONTROLLER_STATUS_INITED;
 

components/bt/include/esp32c3/include/esp_bt.h

@@ -19,7 +19,7 @@ extern "C" {
 #endif
 
 #define ESP_BT_CTRL_CONFIG_MAGIC_VAL    0x5A5AA5A5
-#define ESP_BT_CTRL_CONFIG_VERSION      0x02302140
+#define ESP_BT_CTRL_CONFIG_VERSION      0x02307120
 
 #define ESP_BT_HCI_TL_MAGIC_VALUE   0xfadebead
 #define ESP_BT_HCI_TL_VERSION       0x00010000
@@ -169,6 +169,12 @@ typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status);
 #endif // (CONFIG_BT_BLUEDROID_ENABLED) || (CONFIG_BT_NIMBLE_ENABLED)
 #endif // (CONFIG_BT_BLE_50_FEATURES_SUPPORTED) || (CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT)
 
+#if defined(CONFIG_BT_BLE_CCA_MODE)
+#define BT_BLE_CCA_MODE (CONFIG_BT_BLE_CCA_MODE)
+#else
+#define BT_BLE_CCA_MODE (0)
+#endif
+
 #define AGC_RECORRECT_EN       ((BT_CTRL_AGC_RECORRECT_EN << 0) | (BT_CTRL_CODED_AGC_RECORRECT <<1))
 
 #define CFG_MASK_BIT_SCAN_DUPLICATE_OPTION    (1<<0)
@@ -214,6 +220,7 @@ typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status);
     .scan_backoff_upperlimitmax = BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX,      \
     .dup_list_refresh_period = DUPL_SCAN_CACHE_REFRESH_PERIOD,             \
     .ble_50_feat_supp  = BT_CTRL_50_FEATURE_SUPPORT,                       \
+    .ble_cca_mode = BT_BLE_CCA_MODE,                                       \
 }
 
 #else
@@ -284,6 +291,7 @@ typedef struct {
     uint16_t scan_backoff_upperlimitmax;    /*!< scan backoff upperlimitmax value */
     uint16_t dup_list_refresh_period;       /*!< duplicate scan list refresh time */
     bool ble_50_feat_supp;                  /*!< BLE 5.0 feature support */
+    uint8_t ble_cca_mode;                   /*!< BLE CCA mode */
 } esp_bt_controller_config_t;
 
 /**