mirror of
https://github.com/espressif/esp-idf.git
synced 2026-08-03 20:35:33 +02:00
Merge branch 'feat/remove_eth_drivers' into 'master'
Feat/remove eth drivers Closes IDF-13553 and IDF-5865 See merge request espressif/esp-idf!42021
This commit is contained in:
Ondrej Kosta
@@ -137,7 +137,7 @@ menu "Example Connection Configuration"
|
||||
choice EXAMPLE_ETHERNET_TYPE
|
||||
prompt "Ethernet Type"
|
||||
default EXAMPLE_USE_INTERNAL_ETHERNET if SOC_EMAC_SUPPORTED
|
||||
default EXAMPLE_USE_W5500
|
||||
default EXAMPLE_USE_DUMMY
|
||||
help
|
||||
Select which kind of Ethernet will be used in the example.
|
||||
|
||||
@@ -148,21 +148,11 @@ menu "Example Connection Configuration"
|
||||
help
|
||||
Select internal Ethernet MAC controller.
|
||||
|
||||
config EXAMPLE_USE_DM9051
|
||||
bool "DM9051 Module"
|
||||
select EXAMPLE_USE_SPI_ETHERNET
|
||||
config EXAMPLE_USE_DUMMY
|
||||
bool "DUMMY Module"
|
||||
select ETH_USE_SPI_ETHERNET
|
||||
select ETH_SPI_ETHERNET_DM9051
|
||||
help
|
||||
Select external SPI-Ethernet module.
|
||||
|
||||
config EXAMPLE_USE_W5500
|
||||
bool "W5500 Module"
|
||||
select EXAMPLE_USE_SPI_ETHERNET
|
||||
select ETH_USE_SPI_ETHERNET
|
||||
select ETH_SPI_ETHERNET_W5500
|
||||
help
|
||||
Select external SPI-Ethernet module (W5500).
|
||||
Dummy option to just to pass builds, will be fixed by IDF-14059
|
||||
|
||||
config EXAMPLE_USE_OPENETH
|
||||
bool "OpenCores Ethernet MAC (EXPERIMENTAL)"
|
||||
@@ -179,7 +169,7 @@ menu "Example Connection Configuration"
|
||||
if EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
choice EXAMPLE_ETH_PHY_MODEL
|
||||
prompt "Ethernet PHY Device"
|
||||
default EXAMPLE_ETH_PHY_IP101
|
||||
default EXAMPLE_ETH_PHY_GENERIC
|
||||
help
|
||||
Select the Ethernet PHY device to use in the example.
|
||||
|
||||
@@ -191,46 +181,6 @@ menu "Example Connection Configuration"
|
||||
even if the PHY meets IEEE 802.3 standard. A typical example is loopback
|
||||
functionality, where certain PHYs may require setting a specific speed mode to
|
||||
operate correctly.
|
||||
|
||||
config EXAMPLE_ETH_PHY_IP101
|
||||
bool "IP101"
|
||||
help
|
||||
IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
|
||||
Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
|
||||
|
||||
config EXAMPLE_ETH_PHY_RTL8201
|
||||
bool "RTL8201/SR8201"
|
||||
help
|
||||
RTL8201F/SR8201F is a single port 10/100Mb Ethernet Transceiver with auto MDIX.
|
||||
Goto http://www.corechip-sz.com/productsview.asp?id=22 for more information about it.
|
||||
|
||||
config EXAMPLE_ETH_PHY_LAN87XX
|
||||
bool "LAN87xx"
|
||||
help
|
||||
Below chips are supported:
|
||||
LAN8710A is a small footprint MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and
|
||||
flexPWR® Technology.
|
||||
LAN8720A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support.
|
||||
LAN8740A/LAN8741A is a small footprint MII/RMII 10/100 Energy Efficient Ethernet Transceiver
|
||||
with HP Auto-MDIX and flexPWR® Technology.
|
||||
LAN8742A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and
|
||||
flexPWR® Technology.
|
||||
Goto https://www.microchip.com for more information about them.
|
||||
|
||||
config EXAMPLE_ETH_PHY_DP83848
|
||||
bool "DP83848"
|
||||
help
|
||||
DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
|
||||
Goto http://www.ti.com/product/DP83848J for more information about it.
|
||||
|
||||
config EXAMPLE_ETH_PHY_KSZ80XX
|
||||
bool "KSZ80xx"
|
||||
help
|
||||
With the KSZ80xx series, Microchip offers single-chip 10BASE-T/100BASE-TX
|
||||
Ethernet Physical Layer Transceivers (PHY).
|
||||
The following chips are supported: KSZ8001, KSZ8021, KSZ8031, KSZ8041,
|
||||
KSZ8051, KSZ8061, KSZ8081, KSZ8091
|
||||
Goto https://www.microchip.com for more information about them.
|
||||
endchoice
|
||||
|
||||
config EXAMPLE_ETH_MDC_GPIO
|
||||
@@ -250,65 +200,6 @@ menu "Example Connection Configuration"
|
||||
Set the GPIO number used by SMI MDIO.
|
||||
endif
|
||||
|
||||
if EXAMPLE_USE_SPI_ETHERNET
|
||||
config EXAMPLE_ETH_SPI_HOST
|
||||
int "SPI Host Number"
|
||||
range 0 2
|
||||
default 1
|
||||
help
|
||||
Set the SPI host used to communicate with the SPI Ethernet Controller.
|
||||
|
||||
config EXAMPLE_ETH_SPI_SCLK_GPIO
|
||||
int "SPI SCLK GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 14
|
||||
help
|
||||
Set the GPIO number used by SPI SCLK.
|
||||
|
||||
config EXAMPLE_ETH_SPI_MOSI_GPIO
|
||||
int "SPI MOSI GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 13
|
||||
help
|
||||
Set the GPIO number used by SPI MOSI.
|
||||
|
||||
config EXAMPLE_ETH_SPI_MISO_GPIO
|
||||
int "SPI MISO GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_IN_RANGE_MAX
|
||||
default 12
|
||||
help
|
||||
Set the GPIO number used by SPI MISO.
|
||||
|
||||
config EXAMPLE_ETH_SPI_CS_GPIO
|
||||
int "SPI CS GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 15
|
||||
help
|
||||
Set the GPIO number used by SPI CS.
|
||||
|
||||
config EXAMPLE_ETH_SPI_CLOCK_MHZ
|
||||
int "SPI clock speed (MHz)"
|
||||
range 5 80
|
||||
default 36
|
||||
help
|
||||
Set the clock speed (MHz) of SPI interface.
|
||||
|
||||
config EXAMPLE_ETH_SPI_INT_GPIO
|
||||
int "Interrupt GPIO number"
|
||||
range -1 ENV_GPIO_IN_RANGE_MAX
|
||||
default 4
|
||||
help
|
||||
Set the GPIO number used by the SPI Ethernet module interrupt line.
|
||||
Set -1 to use SPI Ethernet module in polling mode.
|
||||
|
||||
config EXAMPLE_ETH_SPI_POLLING_MS_VAL
|
||||
depends on EXAMPLE_ETH_SPI_INT_GPIO < 0
|
||||
int "Polling period in msec of SPI Ethernet Module"
|
||||
default 10
|
||||
help
|
||||
Set SPI Ethernet module polling period.
|
||||
endif # EXAMPLE_USE_SPI_ETHERNET
|
||||
|
||||
config EXAMPLE_ETH_PHY_RST_GPIO
|
||||
int "PHY Reset GPIO number"
|
||||
range -1 ENV_GPIO_OUT_RANGE_MAX
|
||||
|
||||
@@ -9,9 +9,6 @@
|
||||
#include "example_common_private.h"
|
||||
#include "esp_event.h"
|
||||
#include "esp_eth.h"
|
||||
#if CONFIG_ETH_USE_SPI_ETHERNET
|
||||
#include "driver/spi_master.h"
|
||||
#endif // CONFIG_ETH_USE_SPI_ETHERNET
|
||||
#include "esp_log.h"
|
||||
#include "esp_mac.h"
|
||||
#include "driver/gpio.h"
|
||||
@@ -82,6 +79,10 @@ static esp_eth_netif_glue_handle_t s_eth_glue = NULL;
|
||||
|
||||
static esp_netif_t *eth_start(void)
|
||||
{
|
||||
// TODO just to pass builds, will be fixed by IDF-14059
|
||||
#if CONFIG_EXAMPLE_USE_DUMMY
|
||||
return NULL;
|
||||
#else
|
||||
esp_netif_inherent_config_t esp_netif_config = ESP_NETIF_INHERENT_DEFAULT_ETH();
|
||||
// Warning: the interface desc is used in tests to capture actual connection details (IP, gw, mask)
|
||||
esp_netif_config.if_desc = EXAMPLE_NETIF_DESC_ETH;
|
||||
@@ -105,72 +106,17 @@ static esp_netif_t *eth_start(void)
|
||||
s_mac = esp_eth_mac_new_esp32(&esp32_emac_config, &mac_config);
|
||||
#if CONFIG_EXAMPLE_ETH_PHY_GENERIC
|
||||
s_phy = esp_eth_phy_new_generic(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_IP101
|
||||
s_phy = esp_eth_phy_new_ip101(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_RTL8201
|
||||
s_phy = esp_eth_phy_new_rtl8201(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_LAN87XX
|
||||
s_phy = esp_eth_phy_new_lan87xx(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_DP83848
|
||||
s_phy = esp_eth_phy_new_dp83848(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_KSZ80XX
|
||||
s_phy = esp_eth_phy_new_ksz80xx(&phy_config);
|
||||
#endif // CONFIG_EXAMPLE_ETH_PHY_GENERIC
|
||||
#elif CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
gpio_install_isr_service(0);
|
||||
spi_bus_config_t buscfg = {
|
||||
.miso_io_num = CONFIG_EXAMPLE_ETH_SPI_MISO_GPIO,
|
||||
.mosi_io_num = CONFIG_EXAMPLE_ETH_SPI_MOSI_GPIO,
|
||||
.sclk_io_num = CONFIG_EXAMPLE_ETH_SPI_SCLK_GPIO,
|
||||
.quadwp_io_num = -1,
|
||||
.quadhd_io_num = -1,
|
||||
};
|
||||
ESP_ERROR_CHECK(spi_bus_initialize(CONFIG_EXAMPLE_ETH_SPI_HOST, &buscfg, SPI_DMA_CH_AUTO));
|
||||
spi_device_interface_config_t spi_devcfg = {
|
||||
.mode = 0,
|
||||
.clock_speed_hz = CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ * 1000 * 1000,
|
||||
.spics_io_num = CONFIG_EXAMPLE_ETH_SPI_CS_GPIO,
|
||||
.queue_size = 20
|
||||
};
|
||||
#if CONFIG_EXAMPLE_USE_DM9051
|
||||
/* dm9051 ethernet driver is based on spi driver */
|
||||
eth_dm9051_config_t dm9051_config = ETH_DM9051_DEFAULT_CONFIG(CONFIG_EXAMPLE_ETH_SPI_HOST, &spi_devcfg);
|
||||
dm9051_config.int_gpio_num = CONFIG_EXAMPLE_ETH_SPI_INT_GPIO;
|
||||
#if CONFIG_EXAMPLE_ETH_SPI_INT_GPIO < 0
|
||||
dm9051_config.poll_period_ms = CONFIG_EXAMPLE_ETH_SPI_POLLING_MS_VAL;
|
||||
#endif // CONFIG_EXAMPLE_ETH_SPI_INT_GPIO
|
||||
s_mac = esp_eth_mac_new_dm9051(&dm9051_config, &mac_config);
|
||||
s_phy = esp_eth_phy_new_dm9051(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_USE_W5500
|
||||
/* w5500 ethernet driver is based on spi driver */
|
||||
eth_w5500_config_t w5500_config = ETH_W5500_DEFAULT_CONFIG(CONFIG_EXAMPLE_ETH_SPI_HOST, &spi_devcfg);
|
||||
w5500_config.int_gpio_num = CONFIG_EXAMPLE_ETH_SPI_INT_GPIO;
|
||||
#if CONFIG_EXAMPLE_ETH_SPI_INT_GPIO < 0
|
||||
w5500_config.poll_period_ms = CONFIG_EXAMPLE_ETH_SPI_POLLING_MS_VAL;
|
||||
#endif // CONFIG_EXAMPLE_ETH_SPI_INT_GPIO
|
||||
s_mac = esp_eth_mac_new_w5500(&w5500_config, &mac_config);
|
||||
s_phy = esp_eth_phy_new_w5500(&phy_config);
|
||||
#endif // CONFIG_EXAMPLE_USE_DM9051
|
||||
#elif CONFIG_EXAMPLE_USE_OPENETH
|
||||
phy_config.autonego_timeout_ms = 100;
|
||||
s_mac = esp_eth_mac_new_openeth(&mac_config);
|
||||
s_phy = esp_eth_phy_new_dp83848(&phy_config);
|
||||
s_phy = esp_eth_phy_new_generic(&phy_config);
|
||||
#endif // CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
|
||||
// Install Ethernet driver
|
||||
esp_eth_config_t config = ETH_DEFAULT_CONFIG(s_mac, s_phy);
|
||||
ESP_ERROR_CHECK(esp_eth_driver_install(&config, &s_eth_handle));
|
||||
|
||||
#if CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
/* The SPI Ethernet module might doesn't have a burned factory MAC address, we cat to set it manually.
|
||||
We set the ESP_MAC_ETH mac address as the default, if you want to use ESP_MAC_EFUSE_CUSTOM mac address, please enable the
|
||||
configuration: `ESP_MAC_USE_CUSTOM_MAC_AS_BASE_MAC`
|
||||
*/
|
||||
uint8_t eth_mac[6] = {0};
|
||||
ESP_ERROR_CHECK(esp_read_mac(eth_mac, ESP_MAC_ETH));
|
||||
ESP_ERROR_CHECK(esp_eth_ioctl(s_eth_handle, ETH_CMD_S_MAC_ADDR, eth_mac));
|
||||
#endif // CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
|
||||
// combine driver with netif
|
||||
s_eth_glue = esp_eth_new_netif_glue(s_eth_handle);
|
||||
esp_netif_attach(netif, s_eth_glue);
|
||||
@@ -184,6 +130,7 @@ static esp_netif_t *eth_start(void)
|
||||
|
||||
esp_eth_start(s_eth_handle);
|
||||
return netif;
|
||||
#endif // CONFIG_EXAMPLE_USE_DUMMY
|
||||
}
|
||||
|
||||
static void eth_stop(void)
|
||||
|
||||
@@ -4,20 +4,13 @@ examples/ethernet/basic:
|
||||
enable:
|
||||
- if: INCLUDE_DEFAULT == 1
|
||||
disable:
|
||||
- if: IDF_TARGET in ["esp32h21", "esp32h4"]
|
||||
temporary: true
|
||||
reason: not supported yet # TODO: [ESP32H21] IDF-11581 [ESP32H4] IDF-12360
|
||||
disable_test:
|
||||
- if: IDF_TARGET not in ["esp32"]
|
||||
temporary: true
|
||||
reason: lack of runners
|
||||
- if: IDF_TARGET not in ["esp32", "esp32p4"]
|
||||
depends_components:
|
||||
- esp_eth
|
||||
- esp_netif
|
||||
- lwip
|
||||
- esp_event
|
||||
- esp_driver_gpio
|
||||
- esp_driver_spi
|
||||
|
||||
examples/ethernet/iperf:
|
||||
disable:
|
||||
|
||||
+14
-68
@@ -5,86 +5,32 @@
|
||||
|
||||
See the [README.md](../README.md) file in the upper level [examples](../) directory for more information about examples.
|
||||
|
||||
## Common Pin Assignments
|
||||
Ethernet examples demonstrate basic features related to Ethernet layer, such as:
|
||||
|
||||
### Using ESP32 internal MAC
|
||||
* basic Ethernet initialization and binding to IP stack via ESP-NETIF
|
||||
|
||||
* RMII PHY wiring is fixed and can not be changed through either IOMUX or GPIO Matrix. By default, they're connected as follows:
|
||||
* tools for performance measurement, i.e. `iperf`
|
||||
|
||||
| GPIO | RMII Signal | Notes |
|
||||
| ------ | ----------- | ------------ |
|
||||
| GPIO21 | TX_EN | EMAC_TX_EN |
|
||||
| GPIO19 | TX0 | EMAC_TXD0 |
|
||||
| GPIO22 | TX1 | EMAC_TXD1 |
|
||||
| GPIO25 | RX0 | EMAC_RXD0 |
|
||||
| GPIO26 | RX1 | EMAC_RXD1 |
|
||||
| GPIO27 | CRS_DV | EMAC_RX_DRV |
|
||||
* hardware time synchronization
|
||||
|
||||
* One of the following GPIO pins can be used as RMII REF_CLK input/output:
|
||||
## ESP-IDF Ethernet Driver
|
||||
|
||||
| GPIO | Function | Notes |
|
||||
| ------ | -------------------- | ------------ |
|
||||
| GPIO0 | EMAC_TX_CLK/CLK_OUT1 | input/output |
|
||||
| GPIO16 | EMAC_CLK_OUT | output |
|
||||
| GPIO17 | EMAC_CLK_180 | output |
|
||||
By default, ESP-IDF offers drivers for its internal Ethernet MAC (see Espressif documentation for supported chips) and for Generic IEEE 802.3 compliant PHYs. However, it does not limit users to use just those options. It is possible to create specific MAC and PHY layer drivers tailored for specific chip needs, including SPI Ethernet modules. Espressif maintains additional Ethernet drivers at [esp-eth-drivers repository](https://github.com/espressif/esp-eth-drivers) and the drivers are accessible via [The ESP Component Registry](https://components.espressif.com/) from users' projects.
|
||||
|
||||
* SMI (Serial Management Interface) wiring is not fixed. You may need to changed it according to your board schematic. By default they're connected as follows:
|
||||
## Component for Ethernet Initialization
|
||||
|
||||
| GPIO | SMI Signal | Notes |
|
||||
| ------ | ----------- | ------------- |
|
||||
| GPIO23 | MDC | Output to PHY |
|
||||
| GPIO18 | MDIO | Bidirectional |
|
||||
The `Component for Ethernet Initialization` is a component intended for simple initialization of a wide range of Ethernet PHY chips, including SPI Ethernet modules and for advanced Ethernet configuration options, see [its homepage](https://components.espressif.com/components/espressif/ethernet_init/) for more information.
|
||||
|
||||
* PHY chip has a reset pin, if want to do a hardware reset during initialization, then you have to connect it with one GPIO on ESP32. See more information from [here](#configure-the-project). The default GPIO used for resetting PHY chip is GPIO5.
|
||||
|
||||
### Using SPI ethernet modules
|
||||
|
||||
* SPI Ethernet modules (DM9051, W5500, ...) typically consume one SPI interface plus an interrupt and reset GPIO. They can be connected as follows for ESP32 as an example. However, they can be remapped to any pin using the GPIO Matrix.
|
||||
|
||||
| GPIO | DM9051 |
|
||||
| ------ | ----------- |
|
||||
| GPIO14 | SPI_CLK |
|
||||
| GPIO13 | SPI_MOSI |
|
||||
| GPIO12 | SPI_MISO |
|
||||
| GPIO15 | SPI_CS |
|
||||
| GPIO4 | Interrupt |
|
||||
| NC | Reset |
|
||||
|
||||
---
|
||||
|
||||
**Warning:**
|
||||
Please consult Espressif Technical reference manual along with datasheet for specific ESP Module you use when assigning any other pins, especially when choosing from system configuration menu for the ethernet examples, some pins cannot be used (they may already be utilized for different purpose like SPI Flash/RAM, some pins might be inputs only, etc.).
|
||||
|
||||
---
|
||||
|
||||
## Common Configurations
|
||||
|
||||
1. In the `Example Ethernet Configuration` menu:
|
||||
* Choose the kind of Ethernet.
|
||||
* If `Internal EMAC` is selected:
|
||||
* Choose PHY device under `Ethernet PHY Device`, by default, the **ESP32-Ethernet-Kit** has an `IP101` on board.
|
||||
* Set GPIO number used by SMI signal under `SMI MDC GPIO number` and `SMI MDIO GPIO number` respectively.
|
||||
* If `SPI Ethernet` is selected:
|
||||
* Set SPI specific configuration, including SPI host number, GPIO numbers and clock rate.
|
||||
* Multiple Ethernet SPI modules of the same type can be connected to single SPI interface at a time. The modules then share data and CLK signals. The CS, interrupt and reset pins need to be specifically configured for each module separately.
|
||||
* Set GPIO number used by PHY chip reset under `PHY Reset GPIO number`, you may have to change the default value according to your board schematic. **PHY hardware reset can be disabled by set this value to -1**.
|
||||
* Set PHY address under `PHY Address`, you may have to change the default value according to your board schematic.
|
||||
|
||||
2. In the `Component config > Ethernet` menu:
|
||||
* Under `Support ESP32 internal EMAC controller` sub-menu:
|
||||
* In the `PHY interface`, select `Reduced Media Independent Interface (RMII)`, ESP-IDF currently only support RMII mode.
|
||||
* In the `RMII clock mode`, select one of the source that RMII clock (50MHz) comes from: `Input RMII clock from external` or `Output RMII clock from internal`.
|
||||
* If `Output RMII clock from internal` is enabled, you also have to set the GPIO number that used to output the RMII clock, under `RMII clock GPIO number`. In this case, you can set the GPIO number to 16 or 17.
|
||||
* If `Output RMII clock from GPIO0 (Experimental!)` is also enabled, then you have no choice but GPIO0 to output the RMII clock.
|
||||
* In `Amount of Ethernet DMA Rx buffers` and `Amount of Ethernet DMA Tx buffers`, you can set the amount of DMA buffers used for Tx and Rx.
|
||||
* Under `Support SPI to Ethernet Module` sub-menu, select the SPI module that you used for this example. Currently ESP-IDF only supports `DM9051`, `W5500` and `KSZ8851SNL`.
|
||||
|
||||
## Common Troubleshooting
|
||||
|
||||
* The data panel between ESP32's MAC and PHY needs a fixed 50MHz clock to do synchronization, which also called RMII clock. It can either be provided by an external oscillator or generated from internal APLL. The signal integrity of RMII clock is strict, so keep the trace as short as possible!
|
||||
* If the RMII clock is generated from internal APLL, then APLL can't be used for other purpose (e.g. I2S).
|
||||
* If you observe undefined behavior (e.g. LCD glitches) of any **SPI device** which works normally when Ethernet is not connected over internal EMAC, you need to adjust EMAC DMA burst length (the DMA is shared resource between EMAC and the SPI). The same applies when you observe Ethernet frames corruption at the output of SPI Ethernet module and you use combination of internal EMAC and SPI Ethernet module as network interfaces. To configure the EMAC DMA burst length, modify internal Ethernet initialization as follows:
|
||||
* The data path between ESP32's MAC and PHY needs a fixed 50MHz clock for synchronization, which is also called RMII REF clock. It can either be provided by an external oscillator or generated from internal PLL. The signal integrity of RMII clock is strict, so keep the trace as short as possible!
|
||||
* If you observe undefined behavior (e.g. LCD glitches) of any **SPI device** which works normally when Ethernet is not connected over internal EMAC, you need to adjust EMAC DMA burst length (the DMA is a shared resource between EMAC and the SPI). The same applies when you observe Ethernet frame corruption at the output of SPI Ethernet module and you use a combination of internal EMAC and SPI Ethernet module as network interfaces. To configure the EMAC DMA burst length, modify internal Ethernet initialization as follows:
|
||||
|
||||
```c
|
||||
esp32_emac_config.dma_burst_len = ETH_DMA_BURST_LEN_4; // or other appropriate value
|
||||
```
|
||||
|
||||
* ESP32 limitations:
|
||||
* If the RMII clock is generated from internal APLL, then APLL can't be used for other purposes (e.g. I2S).
|
||||
* If Wi-Fi or Bluetooth are used simultaneously with Ethernet, the RMII clock cannot be generated by the internal APLL clock, as it would result in clock instability. See [ESP32 errata](https://docs.espressif.com/projects/esp-chip-errata/en/latest/esp32/03-errata-description/index.html#clock-esp32-cannot-be-used-as-the-phy-clock-source-if-wi-fi-and-ethernet-are-used-at-the-same-time) for more information.
|
||||
@@ -1,38 +1,35 @@
|
||||
| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-C61 | ESP32-H2 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
|
||||
| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
|
||||
| Supported Targets | ESP32 | ESP32-P4 |
|
||||
| ----------------- | ----- | -------- |
|
||||
|
||||
# Ethernet Example
|
||||
# Basic Ethernet Example
|
||||
(See the README.md file in the upper level 'examples' directory for more information about examples.)
|
||||
|
||||
## Overview
|
||||
|
||||
This example demonstrates basic usage of `Ethernet driver` together with `esp_netif`. Initialization of the `Ethernet driver` is wrapped in separate [sub-component](./components/ethernet_init/ethernet_init.c) of this project to clearly distinguish between the driver's and `esp_netif` initializations. The work flow of the example could be as follows:
|
||||
This example demonstrates basic usage of internal EMAC and `Ethernet driver` together with `esp_netif`. The workflow of the example is as follows:
|
||||
|
||||
1. Install Ethernet driver
|
||||
2. Attach the driver to `esp_netif`
|
||||
3. Send DHCP requests and wait for a DHCP lease
|
||||
4. If get IP address successfully, then you will be able to ping the device
|
||||
|
||||
If you have a new Ethernet application to go (for example, connect to IoT cloud via Ethernet), try this as a basic template, then add your own code.
|
||||
If you have a new simple Ethernet application to go (for example, connect to IoT cloud via Ethernet), try this as a basic template, then add your own code.
|
||||
|
||||
>[!TIP]
|
||||
> For initialization of a wider range of Ethernet PHY chips, including SPI Ethernet modules and for advanced Ethernet configuration options, please use [Component for Ethernet Initialization](https://components.espressif.com/components/espressif/ethernet_init/).
|
||||
|
||||
## How to use example
|
||||
|
||||
### Hardware Required
|
||||
|
||||
To run this example, it's recommended that you have an official ESP32 Ethernet development board - [ESP32-Ethernet-Kit](https://docs.espressif.com/projects/esp-idf/en/latest/hw-reference/get-started-ethernet-kit.html). This example should also work for 3rd party ESP32 board as long as it's integrated with a supported Ethernet PHY chip. Up until now, ESP-IDF supports up to four Ethernet PHY: `LAN8720`, `IP101`, `DP83848` and `RTL8201`, additional PHY drivers should be implemented by users themselves.
|
||||
To run this example, it's recommended that you have an official Espressif Ethernet capable development board - either [ESP32-Ethernet-Kit](https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32/esp32-ethernet-kit/index.html) or [ESP32-P4-Function-EV-Board](https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32p4/esp32-p4-function-ev-board/index.html). This example should also work for 3rd party ESP32 board as long as it's integrated with a IEEE 802.3 compliant Ethernet PHY chip and with the default RMII dataplane GPIO configuration.
|
||||
|
||||
Besides that, `esp_eth` component can drive third-party Ethernet module which integrates MAC and PHY and provides common communication interface (e.g. SPI, USB, etc). This example will take the `DM9051`, `W5500` or `KSZ8851SNL` SPI modules as an example, illustrating how to install the Ethernet driver in the same manner.
|
||||
|
||||
The ESP-IDF supports the usage of multiple Ethernet interfaces at a time when external modules are utilized which is also demonstrated by this example. There are several options you can combine:
|
||||
* Internal EMAC and one SPI Ethernet module.
|
||||
* Two SPI Ethernet modules of the same type connected to single SPI interface and accessed by switching appropriate CS.
|
||||
* Internal EMAC and two SPI Ethernet modules of the same type.
|
||||
> [!NOTE]
|
||||
> `Generic 802.3 PHY` basic functionality should always work for PHY compliant with IEEE 802.3. However, some specific features might be limited. A typical example is loopback functionality, where certain PHYs may require setting a specific speed mode to operate correctly. If this is a case, use driver tailored to that specific chip.
|
||||
|
||||
#### Pin Assignment
|
||||
|
||||
See common pin assignments for Ethernet examples from [upper level](../README.md#common-pin-assignments).
|
||||
|
||||
When using two Ethernet SPI modules at a time, they are to be connected to single SPI interface. Both modules then share data (MOSI/MISO) and CLK signals. However, the CS, interrupt and reset pins need to be connected to separate GPIO for each Ethernet SPI module.
|
||||
This example uses the default RMII GPIO configuration as defined by `ETH_ESP32_EMAC_DEFAULT_CONFIG` for the specific ESP32 chip (ESP32, ESP32P4, etc.).
|
||||
|
||||
### Configure the project
|
||||
|
||||
|
||||
@@ -1,3 +0,0 @@
|
||||
idf_component_register(SRCS "ethernet_init.c"
|
||||
PRIV_REQUIRES esp_driver_gpio esp_eth
|
||||
INCLUDE_DIRS ".")
|
||||
@@ -1,308 +0,0 @@
|
||||
menu "Example Ethernet Configuration"
|
||||
|
||||
orsource "$IDF_PATH/examples/common_components/env_caps/$IDF_TARGET/Kconfig.env_caps"
|
||||
|
||||
config EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
depends on SOC_EMAC_SUPPORTED
|
||||
select ETH_USE_ESP32_EMAC
|
||||
default y
|
||||
bool "Internal EMAC"
|
||||
help
|
||||
Use internal Ethernet MAC controller.
|
||||
|
||||
if EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
choice EXAMPLE_ETH_PHY_MODEL
|
||||
prompt "Ethernet PHY Device"
|
||||
default EXAMPLE_ETH_PHY_IP101
|
||||
help
|
||||
Select the Ethernet PHY device to use in the example.
|
||||
|
||||
config EXAMPLE_ETH_PHY_GENERIC
|
||||
bool "Generic 802.3 PHY"
|
||||
help
|
||||
Any Ethernet PHY chip compliant with IEEE 802.3 can be used. However, while
|
||||
basic functionality should always work, some specific features might be limited,
|
||||
even if the PHY meets IEEE 802.3 standard. A typical example is loopback
|
||||
functionality, where certain PHYs may require setting a specific speed mode to
|
||||
operate correctly.
|
||||
|
||||
config EXAMPLE_ETH_PHY_IP101
|
||||
bool "IP101"
|
||||
help
|
||||
IP101 is a single port 10/100 MII/RMII/TP/Fiber Fast Ethernet Transceiver.
|
||||
Goto http://www.icplus.com.tw/pp-IP101G.html for more information about it.
|
||||
|
||||
config EXAMPLE_ETH_PHY_RTL8201
|
||||
bool "RTL8201/SR8201"
|
||||
help
|
||||
RTL8201F/SR8201F is a single port 10/100Mb Ethernet Transceiver with auto MDIX.
|
||||
Goto http://www.corechip-sz.com/productsview.asp?id=22 for more information about it.
|
||||
|
||||
config EXAMPLE_ETH_PHY_LAN87XX
|
||||
bool "LAN87xx"
|
||||
help
|
||||
Below chips are supported:
|
||||
LAN8710A is a small footprint MII/RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and
|
||||
flexPWR® Technology.
|
||||
LAN8720A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX Support.
|
||||
LAN8740A/LAN8741A is a small footprint MII/RMII 10/100 Energy Efficient Ethernet Transceiver
|
||||
with HP Auto-MDIX and flexPWR® Technology.
|
||||
LAN8742A is a small footprint RMII 10/100 Ethernet Transceiver with HP Auto-MDIX and
|
||||
flexPWR® Technology.
|
||||
Goto https://www.microchip.com for more information about them.
|
||||
|
||||
config EXAMPLE_ETH_PHY_DP83848
|
||||
bool "DP83848"
|
||||
help
|
||||
DP83848 is a single port 10/100Mb/s Ethernet Physical Layer Transceiver.
|
||||
Goto http://www.ti.com/product/DP83848J for more information about it.
|
||||
|
||||
config EXAMPLE_ETH_PHY_KSZ80XX
|
||||
bool "KSZ80xx"
|
||||
help
|
||||
With the KSZ80xx series, Microchip offers single-chip 10BASE-T/100BASE-TX
|
||||
Ethernet Physical Layer Transceivers (PHY).
|
||||
The following chips are supported: KSZ8001, KSZ8021, KSZ8031, KSZ8041,
|
||||
KSZ8051, KSZ8061, KSZ8081, KSZ8091
|
||||
Goto https://www.microchip.com for more information about them.
|
||||
endchoice # EXAMPLE_ETH_PHY_MODEL
|
||||
|
||||
config EXAMPLE_ETH_MDC_GPIO
|
||||
int "SMI MDC GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 23 if IDF_TARGET_ESP32
|
||||
default 31 if IDF_TARGET_ESP32P4
|
||||
help
|
||||
Set the GPIO number used by SMI MDC.
|
||||
|
||||
config EXAMPLE_ETH_MDIO_GPIO
|
||||
int "SMI MDIO GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 18 if IDF_TARGET_ESP32
|
||||
default 52 if IDF_TARGET_ESP32P4
|
||||
help
|
||||
Set the GPIO number used by SMI MDIO.
|
||||
|
||||
config EXAMPLE_ETH_PHY_RST_GPIO
|
||||
int "PHY Reset GPIO number"
|
||||
range -1 ENV_GPIO_OUT_RANGE_MAX
|
||||
default 5 if IDF_TARGET_ESP32
|
||||
default 51 if IDF_TARGET_ESP32P4
|
||||
help
|
||||
Set the GPIO number used to reset PHY chip.
|
||||
Set to -1 to disable PHY chip hardware reset.
|
||||
|
||||
config EXAMPLE_ETH_PHY_ADDR
|
||||
int "PHY Address"
|
||||
range -1 31
|
||||
default 1
|
||||
help
|
||||
Set PHY address according your board schematic.
|
||||
Set to -1 to driver find the PHY address automatically.
|
||||
endif # EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
|
||||
config EXAMPLE_USE_SPI_ETHERNET
|
||||
bool "SPI Ethernet"
|
||||
default n
|
||||
select ETH_USE_SPI_ETHERNET
|
||||
help
|
||||
Use external SPI-Ethernet module(s).
|
||||
|
||||
if EXAMPLE_USE_SPI_ETHERNET
|
||||
config EXAMPLE_SPI_ETHERNETS_NUM
|
||||
int "Number of SPI Ethernet modules to use at a time"
|
||||
range 1 2
|
||||
default 1
|
||||
help
|
||||
Set the number of SPI Ethernet modules you want to use at a time. Multiple SPI modules can be connected
|
||||
to one SPI interface and can be separately accessed based on state of associated Chip Select (CS).
|
||||
|
||||
choice EXAMPLE_ETHERNET_TYPE_SPI
|
||||
prompt "Ethernet SPI"
|
||||
default EXAMPLE_USE_W5500
|
||||
help
|
||||
Select which kind of Ethernet will be used in the example.
|
||||
|
||||
config EXAMPLE_USE_DM9051
|
||||
bool "DM9051 Module"
|
||||
select ETH_SPI_ETHERNET_DM9051
|
||||
help
|
||||
Select external SPI-Ethernet module (DM9051).
|
||||
|
||||
config EXAMPLE_USE_KSZ8851SNL
|
||||
bool "KSZ8851SNL Module"
|
||||
select ETH_SPI_ETHERNET_KSZ8851SNL
|
||||
help
|
||||
Select external SPI-Ethernet module (KSZ8851SNL).
|
||||
|
||||
config EXAMPLE_USE_W5500
|
||||
bool "W5500 Module"
|
||||
select ETH_SPI_ETHERNET_W5500
|
||||
help
|
||||
Select external SPI-Ethernet module (W5500).
|
||||
endchoice
|
||||
|
||||
config EXAMPLE_ETH_SPI_HOST
|
||||
int "SPI Host Number"
|
||||
range 0 2
|
||||
default 1
|
||||
help
|
||||
Set the SPI host used to communicate with the SPI Ethernet Controller.
|
||||
|
||||
config EXAMPLE_ETH_SPI_SCLK_GPIO
|
||||
int "SPI SCLK GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 14 if IDF_TARGET_ESP32
|
||||
default 12 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
|
||||
default 6 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32C2 || IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32C61
|
||||
default 4 if IDF_TARGET_ESP32H2
|
||||
default 33 if IDF_TARGET_ESP32P4
|
||||
default 8 if IDF_TARGET_ESP32C5
|
||||
help
|
||||
Set the GPIO number used by SPI SCLK.
|
||||
|
||||
config EXAMPLE_ETH_SPI_MOSI_GPIO
|
||||
int "SPI MOSI GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 13 if IDF_TARGET_ESP32
|
||||
default 11 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
|
||||
default 7 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32C2 || IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32C61
|
||||
default 5 if IDF_TARGET_ESP32H2
|
||||
default 32 if IDF_TARGET_ESP32P4
|
||||
default 10 if IDF_TARGET_ESP32C5
|
||||
help
|
||||
Set the GPIO number used by SPI MOSI.
|
||||
|
||||
config EXAMPLE_ETH_SPI_MISO_GPIO
|
||||
int "SPI MISO GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_IN_RANGE_MAX
|
||||
default 12 if IDF_TARGET_ESP32
|
||||
default 13 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
|
||||
default 2 if IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32C2 || IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32C61
|
||||
default 0 if IDF_TARGET_ESP32H2
|
||||
default 24 if IDF_TARGET_ESP32P4
|
||||
default 9 if IDF_TARGET_ESP32C5
|
||||
help
|
||||
Set the GPIO number used by SPI MISO.
|
||||
|
||||
config EXAMPLE_ETH_SPI_CLOCK_MHZ
|
||||
int "SPI clock speed (MHz)"
|
||||
range 5 80
|
||||
default 16
|
||||
help
|
||||
Set the clock speed (MHz) of SPI interface.
|
||||
|
||||
config EXAMPLE_ETH_SPI_CS0_GPIO
|
||||
int "SPI CS0 GPIO number for SPI Ethernet module #1"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 15 if IDF_TARGET_ESP32
|
||||
default 10 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32C2
|
||||
default 3 if IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32C5 || IDF_TARGET_ESP32C61
|
||||
default 1 if IDF_TARGET_ESP32H2
|
||||
default 21 if IDF_TARGET_ESP32P4
|
||||
help
|
||||
Set the GPIO number used by SPI CS0, i.e. Chip Select associated with the first SPI Eth module).
|
||||
|
||||
config EXAMPLE_ETH_SPI_CS1_GPIO
|
||||
depends on EXAMPLE_SPI_ETHERNETS_NUM > 1
|
||||
int "SPI CS1 GPIO number for SPI Ethernet module #2"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 32 if IDF_TARGET_ESP32
|
||||
default 7 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3
|
||||
default 8 if IDF_TARGET_ESP32C3
|
||||
default 21 if IDF_TARGET_ESP32C6
|
||||
default 3 if IDF_TARGET_ESP32C2
|
||||
default 11 if IDF_TARGET_ESP32H2
|
||||
default 23 if IDF_TARGET_ESP32P4 || IDF_TARGET_ESP32C61
|
||||
default 1 if IDF_TARGET_ESP32C5
|
||||
help
|
||||
Set the GPIO number used by SPI CS1, i.e. Chip Select associated with the second SPI Eth module.
|
||||
|
||||
config EXAMPLE_ETH_SPI_INT0_GPIO
|
||||
int "Interrupt GPIO number SPI Ethernet module #1"
|
||||
range -1 ENV_GPIO_IN_RANGE_MAX
|
||||
default 4 if IDF_TARGET_ESP32 || IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3
|
||||
default 4 if IDF_TARGET_ESP32C2 || IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32C5
|
||||
default 10 if IDF_TARGET_ESP32H2
|
||||
default 48 if IDF_TARGET_ESP32P4
|
||||
default 0 if IDF_TARGET_ESP32C61
|
||||
help
|
||||
Set the GPIO number used by the first SPI Ethernet module interrupt line.
|
||||
Set -1 to use SPI Ethernet module in polling mode.
|
||||
|
||||
config EXAMPLE_ETH_SPI_INT1_GPIO
|
||||
depends on EXAMPLE_SPI_ETHERNETS_NUM > 1
|
||||
int "Interrupt GPIO number SPI Ethernet module #2"
|
||||
range -1 ENV_GPIO_IN_RANGE_MAX
|
||||
default 33 if IDF_TARGET_ESP32
|
||||
default 5 if IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32C3 || IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32C2
|
||||
default 5 if IDF_TARGET_ESP32C6 || IDF_TARGET_ESP32C5
|
||||
default 9 if IDF_TARGET_ESP32H2
|
||||
default 47 if IDF_TARGET_ESP32P4
|
||||
default 1 if IDF_TARGET_ESP32C61
|
||||
help
|
||||
Set the GPIO number used by the second SPI Ethernet module interrupt line.
|
||||
Set -1 to use SPI Ethernet module in polling mode.
|
||||
|
||||
config EXAMPLE_ETH_SPI_POLLING0_MS_VAL
|
||||
depends on EXAMPLE_ETH_SPI_INT0_GPIO < 0
|
||||
int "Polling period in msec of SPI Ethernet Module #1"
|
||||
default 10
|
||||
help
|
||||
Set SPI Ethernet module polling period.
|
||||
|
||||
config EXAMPLE_ETH_SPI_POLLING1_MS_VAL
|
||||
depends on EXAMPLE_SPI_ETHERNETS_NUM > 1 && EXAMPLE_ETH_SPI_INT1_GPIO < 0
|
||||
int "Polling period in msec of SPI Ethernet Module #2"
|
||||
default 10
|
||||
help
|
||||
Set SPI Ethernet module polling period.
|
||||
|
||||
# Hidden variable to ensure that polling period option is visible only when interrupt is set disabled and
|
||||
# it is set to known value (0) when interrupt is enabled at the same time.
|
||||
config EXAMPLE_ETH_SPI_POLLING0_MS
|
||||
int
|
||||
default EXAMPLE_ETH_SPI_POLLING0_MS_VAL if EXAMPLE_ETH_SPI_POLLING0_MS_VAL > 0
|
||||
default 0
|
||||
|
||||
# Hidden variable to ensure that polling period option is visible only when interrupt is set disabled and
|
||||
# it is set to known value (0) when interrupt is enabled at the same time.
|
||||
config EXAMPLE_ETH_SPI_POLLING1_MS
|
||||
depends on EXAMPLE_SPI_ETHERNETS_NUM > 1
|
||||
int
|
||||
default EXAMPLE_ETH_SPI_POLLING1_MS_VAL if EXAMPLE_ETH_SPI_POLLING1_MS_VAL > 0
|
||||
default 0
|
||||
|
||||
config EXAMPLE_ETH_SPI_PHY_RST0_GPIO
|
||||
int "PHY Reset GPIO number of SPI Ethernet Module #1"
|
||||
range -1 ENV_GPIO_OUT_RANGE_MAX
|
||||
default -1
|
||||
help
|
||||
Set the GPIO number used to reset PHY chip on the first SPI Ethernet module.
|
||||
Set to -1 to disable PHY chip hardware reset.
|
||||
|
||||
config EXAMPLE_ETH_SPI_PHY_RST1_GPIO
|
||||
depends on EXAMPLE_SPI_ETHERNETS_NUM > 1
|
||||
int "PHY Reset GPIO number of SPI Ethernet Module #2"
|
||||
range -1 ENV_GPIO_OUT_RANGE_MAX
|
||||
default -1
|
||||
help
|
||||
Set the GPIO number used to reset PHY chip on the second SPI Ethernet module.
|
||||
Set to -1 to disable PHY chip hardware reset.
|
||||
|
||||
config EXAMPLE_ETH_SPI_PHY_ADDR0
|
||||
int "PHY Address of SPI Ethernet Module #1"
|
||||
range 0 31
|
||||
default 1
|
||||
help
|
||||
Set the first SPI Ethernet module PHY address according your board schematic.
|
||||
|
||||
config EXAMPLE_ETH_SPI_PHY_ADDR1
|
||||
depends on EXAMPLE_SPI_ETHERNETS_NUM > 1
|
||||
int "PHY Address of SPI Ethernet Module #2"
|
||||
range 0 31
|
||||
default 1
|
||||
help
|
||||
Set the second SPI Ethernet module PHY address according your board schematic.
|
||||
endif # EXAMPLE_USE_SPI_ETHERNET
|
||||
endmenu
|
||||
@@ -1,340 +0,0 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Unlicense OR CC0-1.0
|
||||
*/
|
||||
#include "ethernet_init.h"
|
||||
#include "esp_log.h"
|
||||
#include "esp_check.h"
|
||||
#include "esp_mac.h"
|
||||
#include "driver/gpio.h"
|
||||
#include "sdkconfig.h"
|
||||
#if CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
#include "driver/spi_master.h"
|
||||
#endif // CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
|
||||
#if CONFIG_EXAMPLE_SPI_ETHERNETS_NUM
|
||||
#define SPI_ETHERNETS_NUM CONFIG_EXAMPLE_SPI_ETHERNETS_NUM
|
||||
#else
|
||||
#define SPI_ETHERNETS_NUM 0
|
||||
#endif
|
||||
|
||||
#if CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
#define INTERNAL_ETHERNETS_NUM 1
|
||||
#else
|
||||
#define INTERNAL_ETHERNETS_NUM 0
|
||||
#endif
|
||||
|
||||
#define INIT_SPI_ETH_MODULE_CONFIG(eth_module_config, num) \
|
||||
do { \
|
||||
eth_module_config[num].spi_cs_gpio = CONFIG_EXAMPLE_ETH_SPI_CS ##num## _GPIO; \
|
||||
eth_module_config[num].int_gpio = CONFIG_EXAMPLE_ETH_SPI_INT ##num## _GPIO; \
|
||||
eth_module_config[num].polling_ms = CONFIG_EXAMPLE_ETH_SPI_POLLING ##num## _MS; \
|
||||
eth_module_config[num].phy_reset_gpio = CONFIG_EXAMPLE_ETH_SPI_PHY_RST ##num## _GPIO; \
|
||||
eth_module_config[num].phy_addr = CONFIG_EXAMPLE_ETH_SPI_PHY_ADDR ##num; \
|
||||
} while(0)
|
||||
|
||||
typedef struct {
|
||||
uint8_t spi_cs_gpio;
|
||||
int8_t int_gpio;
|
||||
uint32_t polling_ms;
|
||||
int8_t phy_reset_gpio;
|
||||
uint8_t phy_addr;
|
||||
uint8_t *mac_addr;
|
||||
}spi_eth_module_config_t;
|
||||
|
||||
static const char *TAG = "example_eth_init";
|
||||
#if CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
static bool gpio_isr_svc_init_by_eth = false; // indicates that we initialized the GPIO ISR service
|
||||
#endif // CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
|
||||
|
||||
#if CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
/**
|
||||
* @brief Internal ESP32 Ethernet initialization
|
||||
*
|
||||
* @param[out] mac_out optionally returns Ethernet MAC object
|
||||
* @param[out] phy_out optionally returns Ethernet PHY object
|
||||
* @return
|
||||
* - esp_eth_handle_t if init succeeded
|
||||
* - NULL if init failed
|
||||
*/
|
||||
static esp_eth_handle_t eth_init_internal(esp_eth_mac_t **mac_out, esp_eth_phy_t **phy_out)
|
||||
{
|
||||
esp_eth_handle_t ret = NULL;
|
||||
|
||||
// Init common MAC and PHY configs to default
|
||||
eth_mac_config_t mac_config = ETH_MAC_DEFAULT_CONFIG();
|
||||
eth_phy_config_t phy_config = ETH_PHY_DEFAULT_CONFIG();
|
||||
|
||||
// Update PHY config based on board specific configuration
|
||||
phy_config.phy_addr = CONFIG_EXAMPLE_ETH_PHY_ADDR;
|
||||
phy_config.reset_gpio_num = CONFIG_EXAMPLE_ETH_PHY_RST_GPIO;
|
||||
// Init vendor specific MAC config to default
|
||||
eth_esp32_emac_config_t esp32_emac_config = ETH_ESP32_EMAC_DEFAULT_CONFIG();
|
||||
// Update vendor specific MAC config based on board configuration
|
||||
esp32_emac_config.smi_gpio.mdc_num = CONFIG_EXAMPLE_ETH_MDC_GPIO;
|
||||
esp32_emac_config.smi_gpio.mdio_num = CONFIG_EXAMPLE_ETH_MDIO_GPIO;
|
||||
#if CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
// The DMA is shared resource between EMAC and the SPI. Therefore, adjust
|
||||
// EMAC DMA burst length when SPI Ethernet is used along with EMAC.
|
||||
esp32_emac_config.dma_burst_len = ETH_DMA_BURST_LEN_4;
|
||||
#endif // CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
// Create new ESP32 Ethernet MAC instance
|
||||
esp_eth_mac_t *mac = esp_eth_mac_new_esp32(&esp32_emac_config, &mac_config);
|
||||
// Create new PHY instance based on board configuration
|
||||
#if CONFIG_EXAMPLE_ETH_PHY_GENERIC
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_generic(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_IP101
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_ip101(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_RTL8201
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_rtl8201(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_LAN87XX
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_lan87xx(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_DP83848
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_dp83848(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_ETH_PHY_KSZ80XX
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_ksz80xx(&phy_config);
|
||||
#endif
|
||||
// Init Ethernet driver to default and install it
|
||||
esp_eth_handle_t eth_handle = NULL;
|
||||
esp_eth_config_t config = ETH_DEFAULT_CONFIG(mac, phy);
|
||||
ESP_GOTO_ON_FALSE(esp_eth_driver_install(&config, ð_handle) == ESP_OK, NULL,
|
||||
err, TAG, "Ethernet driver install failed");
|
||||
|
||||
if (mac_out != NULL) {
|
||||
*mac_out = mac;
|
||||
}
|
||||
if (phy_out != NULL) {
|
||||
*phy_out = phy;
|
||||
}
|
||||
return eth_handle;
|
||||
err:
|
||||
if (eth_handle != NULL) {
|
||||
esp_eth_driver_uninstall(eth_handle);
|
||||
}
|
||||
if (mac != NULL) {
|
||||
mac->del(mac);
|
||||
}
|
||||
if (phy != NULL) {
|
||||
phy->del(phy);
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
#endif // CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
|
||||
#if CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
/**
|
||||
* @brief SPI bus initialization (to be used by Ethernet SPI modules)
|
||||
*
|
||||
* @return
|
||||
* - ESP_OK on success
|
||||
*/
|
||||
static esp_err_t spi_bus_init(void)
|
||||
{
|
||||
esp_err_t ret = ESP_OK;
|
||||
|
||||
#if (CONFIG_EXAMPLE_ETH_SPI_INT0_GPIO >= 0) || (CONFIG_EXAMPLE_ETH_SPI_INT1_GPIO > 0)
|
||||
// Install GPIO ISR handler to be able to service SPI Eth modules interrupts
|
||||
ret = gpio_install_isr_service(0);
|
||||
if (ret == ESP_OK) {
|
||||
gpio_isr_svc_init_by_eth = true;
|
||||
} else if (ret == ESP_ERR_INVALID_STATE) {
|
||||
ESP_LOGW(TAG, "GPIO ISR handler has been already installed");
|
||||
ret = ESP_OK; // ISR handler has been already installed so no issues
|
||||
} else {
|
||||
ESP_LOGE(TAG, "GPIO ISR handler install failed");
|
||||
goto err;
|
||||
}
|
||||
#endif
|
||||
|
||||
// Init SPI bus
|
||||
spi_bus_config_t buscfg = {
|
||||
.miso_io_num = CONFIG_EXAMPLE_ETH_SPI_MISO_GPIO,
|
||||
.mosi_io_num = CONFIG_EXAMPLE_ETH_SPI_MOSI_GPIO,
|
||||
.sclk_io_num = CONFIG_EXAMPLE_ETH_SPI_SCLK_GPIO,
|
||||
.quadwp_io_num = -1,
|
||||
.quadhd_io_num = -1,
|
||||
};
|
||||
ESP_GOTO_ON_ERROR(spi_bus_initialize(CONFIG_EXAMPLE_ETH_SPI_HOST, &buscfg, SPI_DMA_CH_AUTO),
|
||||
err, TAG, "SPI host #%d init failed", CONFIG_EXAMPLE_ETH_SPI_HOST);
|
||||
|
||||
err:
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Ethernet SPI modules initialization
|
||||
*
|
||||
* @param[in] spi_eth_module_config specific SPI Ethernet module configuration
|
||||
* @param[out] mac_out optionally returns Ethernet MAC object
|
||||
* @param[out] phy_out optionally returns Ethernet PHY object
|
||||
* @return
|
||||
* - esp_eth_handle_t if init succeeded
|
||||
* - NULL if init failed
|
||||
*/
|
||||
static esp_eth_handle_t eth_init_spi(spi_eth_module_config_t *spi_eth_module_config, esp_eth_mac_t **mac_out, esp_eth_phy_t **phy_out)
|
||||
{
|
||||
esp_eth_handle_t ret = NULL;
|
||||
|
||||
// Init common MAC and PHY configs to default
|
||||
eth_mac_config_t mac_config = ETH_MAC_DEFAULT_CONFIG();
|
||||
eth_phy_config_t phy_config = ETH_PHY_DEFAULT_CONFIG();
|
||||
|
||||
// Update PHY config based on board specific configuration
|
||||
phy_config.phy_addr = spi_eth_module_config->phy_addr;
|
||||
phy_config.reset_gpio_num = spi_eth_module_config->phy_reset_gpio;
|
||||
|
||||
// Configure SPI interface for specific SPI module
|
||||
spi_device_interface_config_t spi_devcfg = {
|
||||
.mode = 0,
|
||||
.clock_speed_hz = CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ * 1000 * 1000,
|
||||
.queue_size = 20,
|
||||
.spics_io_num = spi_eth_module_config->spi_cs_gpio
|
||||
};
|
||||
// Init vendor specific MAC config to default, and create new SPI Ethernet MAC instance
|
||||
// and new PHY instance based on board configuration
|
||||
#if CONFIG_EXAMPLE_USE_KSZ8851SNL
|
||||
eth_ksz8851snl_config_t ksz8851snl_config = ETH_KSZ8851SNL_DEFAULT_CONFIG(CONFIG_EXAMPLE_ETH_SPI_HOST, &spi_devcfg);
|
||||
ksz8851snl_config.int_gpio_num = spi_eth_module_config->int_gpio;
|
||||
ksz8851snl_config.poll_period_ms = spi_eth_module_config->polling_ms;
|
||||
esp_eth_mac_t *mac = esp_eth_mac_new_ksz8851snl(&ksz8851snl_config, &mac_config);
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_ksz8851snl(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_USE_DM9051
|
||||
eth_dm9051_config_t dm9051_config = ETH_DM9051_DEFAULT_CONFIG(CONFIG_EXAMPLE_ETH_SPI_HOST, &spi_devcfg);
|
||||
dm9051_config.int_gpio_num = spi_eth_module_config->int_gpio;
|
||||
dm9051_config.poll_period_ms = spi_eth_module_config->polling_ms;
|
||||
esp_eth_mac_t *mac = esp_eth_mac_new_dm9051(&dm9051_config, &mac_config);
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_dm9051(&phy_config);
|
||||
#elif CONFIG_EXAMPLE_USE_W5500
|
||||
eth_w5500_config_t w5500_config = ETH_W5500_DEFAULT_CONFIG(CONFIG_EXAMPLE_ETH_SPI_HOST, &spi_devcfg);
|
||||
w5500_config.int_gpio_num = spi_eth_module_config->int_gpio;
|
||||
w5500_config.poll_period_ms = spi_eth_module_config->polling_ms;
|
||||
esp_eth_mac_t *mac = esp_eth_mac_new_w5500(&w5500_config, &mac_config);
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_w5500(&phy_config);
|
||||
#endif //CONFIG_EXAMPLE_USE_W5500
|
||||
// Init Ethernet driver to default and install it
|
||||
esp_eth_handle_t eth_handle = NULL;
|
||||
esp_eth_config_t eth_config_spi = ETH_DEFAULT_CONFIG(mac, phy);
|
||||
ESP_GOTO_ON_FALSE(esp_eth_driver_install(ð_config_spi, ð_handle) == ESP_OK, NULL, err, TAG, "SPI Ethernet driver install failed");
|
||||
|
||||
// The SPI Ethernet module might not have a burned factory MAC address, we can set it manually.
|
||||
if (spi_eth_module_config->mac_addr != NULL) {
|
||||
ESP_GOTO_ON_FALSE(esp_eth_ioctl(eth_handle, ETH_CMD_S_MAC_ADDR, spi_eth_module_config->mac_addr) == ESP_OK,
|
||||
NULL, err, TAG, "SPI Ethernet MAC address config failed");
|
||||
}
|
||||
|
||||
if (mac_out != NULL) {
|
||||
*mac_out = mac;
|
||||
}
|
||||
if (phy_out != NULL) {
|
||||
*phy_out = phy;
|
||||
}
|
||||
return eth_handle;
|
||||
err:
|
||||
if (eth_handle != NULL) {
|
||||
esp_eth_driver_uninstall(eth_handle);
|
||||
}
|
||||
if (mac != NULL) {
|
||||
mac->del(mac);
|
||||
}
|
||||
if (phy != NULL) {
|
||||
phy->del(phy);
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
#endif // CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
|
||||
esp_err_t example_eth_init(esp_eth_handle_t *eth_handles_out[], uint8_t *eth_cnt_out)
|
||||
{
|
||||
esp_err_t ret = ESP_OK;
|
||||
esp_eth_handle_t *eth_handles = NULL;
|
||||
uint8_t eth_cnt = 0;
|
||||
|
||||
#if CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET || CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
ESP_GOTO_ON_FALSE(eth_handles_out != NULL && eth_cnt_out != NULL, ESP_ERR_INVALID_ARG,
|
||||
err, TAG, "invalid arguments: initialized handles array or number of interfaces");
|
||||
eth_handles = calloc(SPI_ETHERNETS_NUM + INTERNAL_ETHERNETS_NUM, sizeof(esp_eth_handle_t));
|
||||
ESP_GOTO_ON_FALSE(eth_handles != NULL, ESP_ERR_NO_MEM, err, TAG, "no memory");
|
||||
|
||||
#if CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
eth_handles[eth_cnt] = eth_init_internal(NULL, NULL);
|
||||
ESP_GOTO_ON_FALSE(eth_handles[eth_cnt], ESP_FAIL, err, TAG, "internal Ethernet init failed");
|
||||
eth_cnt++;
|
||||
#endif //CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET
|
||||
|
||||
#if CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
ESP_GOTO_ON_ERROR(spi_bus_init(), err, TAG, "SPI bus init failed");
|
||||
// Init specific SPI Ethernet module configuration from Kconfig (CS GPIO, Interrupt GPIO, etc.)
|
||||
spi_eth_module_config_t spi_eth_module_config[CONFIG_EXAMPLE_SPI_ETHERNETS_NUM] = { 0 };
|
||||
INIT_SPI_ETH_MODULE_CONFIG(spi_eth_module_config, 0);
|
||||
// The SPI Ethernet module(s) might not have a burned factory MAC address, hence use manually configured address(es).
|
||||
// In this example, Locally Administered MAC address derived from ESP32x base MAC address is used.
|
||||
// Note that Locally Administered OUI range should be used only when testing on a LAN under your control!
|
||||
uint8_t base_mac_addr[ETH_ADDR_LEN];
|
||||
ESP_GOTO_ON_ERROR(esp_efuse_mac_get_default(base_mac_addr), err, TAG, "get EFUSE MAC failed");
|
||||
uint8_t local_mac_1[ETH_ADDR_LEN];
|
||||
esp_derive_local_mac(local_mac_1, base_mac_addr);
|
||||
spi_eth_module_config[0].mac_addr = local_mac_1;
|
||||
#if CONFIG_EXAMPLE_SPI_ETHERNETS_NUM > 1
|
||||
INIT_SPI_ETH_MODULE_CONFIG(spi_eth_module_config, 1);
|
||||
uint8_t local_mac_2[ETH_ADDR_LEN];
|
||||
base_mac_addr[ETH_ADDR_LEN - 1] += 1;
|
||||
esp_derive_local_mac(local_mac_2, base_mac_addr);
|
||||
spi_eth_module_config[1].mac_addr = local_mac_2;
|
||||
#endif
|
||||
#if CONFIG_EXAMPLE_SPI_ETHERNETS_NUM > 2
|
||||
#error Maximum number of supported SPI Ethernet devices is currently limited to 2 by this example.
|
||||
#endif
|
||||
for (int i = 0; i < CONFIG_EXAMPLE_SPI_ETHERNETS_NUM; i++) {
|
||||
eth_handles[eth_cnt] = eth_init_spi(&spi_eth_module_config[i], NULL, NULL);
|
||||
ESP_GOTO_ON_FALSE(eth_handles[eth_cnt], ESP_FAIL, err, TAG, "SPI Ethernet init failed");
|
||||
eth_cnt++;
|
||||
}
|
||||
#endif // CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
#else
|
||||
ESP_LOGD(TAG, "no Ethernet device selected to init");
|
||||
#endif // CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET || CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
*eth_handles_out = eth_handles;
|
||||
*eth_cnt_out = eth_cnt;
|
||||
|
||||
return ret;
|
||||
#if CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET || CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
err:
|
||||
free(eth_handles);
|
||||
return ret;
|
||||
#endif
|
||||
}
|
||||
|
||||
esp_err_t example_eth_deinit(esp_eth_handle_t *eth_handles, uint8_t eth_cnt)
|
||||
{
|
||||
ESP_RETURN_ON_FALSE(eth_handles != NULL, ESP_ERR_INVALID_ARG, TAG, "array of Ethernet handles cannot be NULL");
|
||||
for (int i = 0; i < eth_cnt; i++) {
|
||||
esp_eth_mac_t *mac = NULL;
|
||||
esp_eth_phy_t *phy = NULL;
|
||||
if (eth_handles[i] != NULL) {
|
||||
esp_eth_get_mac_instance(eth_handles[i], &mac);
|
||||
esp_eth_get_phy_instance(eth_handles[i], &phy);
|
||||
ESP_RETURN_ON_ERROR(esp_eth_driver_uninstall(eth_handles[i]), TAG, "Ethernet %p uninstall failed", eth_handles[i]);
|
||||
}
|
||||
if (mac != NULL) {
|
||||
mac->del(mac);
|
||||
}
|
||||
if (phy != NULL) {
|
||||
phy->del(phy);
|
||||
}
|
||||
}
|
||||
#if CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
spi_bus_free(CONFIG_EXAMPLE_ETH_SPI_HOST);
|
||||
#if (CONFIG_EXAMPLE_ETH_SPI_INT0_GPIO >= 0) || (CONFIG_EXAMPLE_ETH_SPI_INT1_GPIO > 0)
|
||||
// We installed the GPIO ISR service so let's uninstall it too.
|
||||
// BE CAREFUL HERE though since the service might be used by other functionality!
|
||||
if (gpio_isr_svc_init_by_eth) {
|
||||
ESP_LOGW(TAG, "uninstalling GPIO ISR service!");
|
||||
gpio_uninstall_isr_service();
|
||||
}
|
||||
#endif
|
||||
#endif //CONFIG_EXAMPLE_USE_SPI_ETHERNET
|
||||
free(eth_handles);
|
||||
return ESP_OK;
|
||||
}
|
||||
@@ -1,41 +0,0 @@
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Unlicense OR CC0-1.0
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "esp_eth_driver.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief Initialize Ethernet driver based on Espressif IoT Development Framework Configuration
|
||||
*
|
||||
* @param[out] eth_handles_out array of initialized Ethernet driver handles
|
||||
* @param[out] eth_cnt_out number of initialized Ethernets
|
||||
* @return
|
||||
* - ESP_OK on success
|
||||
* - ESP_ERR_INVALID_ARG when passed invalid pointers
|
||||
* - ESP_ERR_NO_MEM when there is no memory to allocate for Ethernet driver handles array
|
||||
* - ESP_FAIL on any other failure
|
||||
*/
|
||||
esp_err_t example_eth_init(esp_eth_handle_t *eth_handles_out[], uint8_t *eth_cnt_out);
|
||||
|
||||
/**
|
||||
* @brief De-initialize array of Ethernet drivers
|
||||
* @note All Ethernet drivers in the array must be stopped prior calling this function.
|
||||
*
|
||||
* @param[in] eth_handles array of Ethernet drivers to be de-initialized
|
||||
* @param[in] eth_cnt number of Ethernets drivers to be de-initialized
|
||||
* @return
|
||||
* - ESP_OK on success
|
||||
* - ESP_ERR_INVALID_ARG when passed invalid pointers
|
||||
*/
|
||||
esp_err_t example_eth_deinit(esp_eth_handle_t *eth_handles, uint8_t eth_cnt);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
@@ -1,3 +1,3 @@
|
||||
idf_component_register(SRCS "ethernet_example_main.c"
|
||||
PRIV_REQUIRES esp_netif esp_eth ethernet_init
|
||||
PRIV_REQUIRES esp_netif esp_eth
|
||||
INCLUDE_DIRS ".")
|
||||
|
||||
@@ -1,9 +1,194 @@
|
||||
menu "Example Configuration"
|
||||
menu "Example Ethernet Configuration"
|
||||
|
||||
orsource "$IDF_PATH/examples/common_components/env_caps/$IDF_TARGET/Kconfig.env_caps"
|
||||
|
||||
choice EXAMPLE_ETH_PHY_INTERFACE
|
||||
prompt "PHY interface"
|
||||
default EXAMPLE_ETH_PHY_INTERFACE_DEFAULT
|
||||
help
|
||||
Select the communication interface between MAC and PHY chip.
|
||||
|
||||
config EXAMPLE_ETH_PHY_INTERFACE_DEFAULT
|
||||
bool "Default EMAC interface configuration"
|
||||
help
|
||||
Will use default hardcoded ESP Ethernet MAC driver configuration
|
||||
|
||||
config EXAMPLE_ETH_PHY_INTERFACE_RMII
|
||||
bool "Reduced Media Independent Interface (RMII)"
|
||||
endchoice
|
||||
|
||||
if EXAMPLE_ETH_PHY_INTERFACE_RMII
|
||||
choice EXAMPLE_ETH_RMII_CLK_MODE
|
||||
prompt "RMII CLK mode"
|
||||
default EXAMPLE_ETH_RMII_CLK_INPUT
|
||||
help
|
||||
Select external or internal RMII CLK.
|
||||
|
||||
config EXAMPLE_ETH_RMII_CLK_INPUT
|
||||
bool "Input RMII CLK from external"
|
||||
help
|
||||
MAC will get RMII CLK from outside.
|
||||
|
||||
config EXAMPLE_ETH_RMII_CLK_OUTPUT
|
||||
bool "Output RMII CLK from internal"
|
||||
help
|
||||
Generate RMII CLK by internal PLL.
|
||||
This clock can be routed to the external PHY device.
|
||||
!! WARNING !!
|
||||
ESP32 Errata: If you want the Ethernet to work with WiFi or BT, don’t select ESP32
|
||||
as RMII CLK output as it would result in clock instability! Applicable only to ESP32,
|
||||
other ESP32 SoCs (like ESP32P4) are not affected.
|
||||
endchoice
|
||||
|
||||
config EXAMPLE_ETH_RMII_CLK_GPIO
|
||||
int "RMII CLK GPIO"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_RANGE_MAX
|
||||
default 50 if IDF_TARGET_ESP32P4
|
||||
default 0
|
||||
help
|
||||
RMII CLK input or output GPIO. See datasheet for available GPIOs.
|
||||
|
||||
config EXAMPLE_ETH_RMII_CLK_EXT_LOOPBACK_EN
|
||||
depends on !SOC_EMAC_RMII_CLK_OUT_INTERNAL_LOOPBACK && EXAMPLE_ETH_RMII_CLK_OUTPUT
|
||||
bool "Enable external RMII CLK loopback input"
|
||||
default y
|
||||
help
|
||||
RMII CLK output signal must be looped back to the EMAC externally on certain chips.
|
||||
|
||||
config EXAMPLE_ETH_RMII_CLK_EXT_LOOPBACK_IN_GPIO
|
||||
depends on EXAMPLE_ETH_RMII_CLK_EXT_LOOPBACK_EN
|
||||
int "RMII CLK loopback input GPIO"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_RANGE_MAX
|
||||
default 32 if IDF_TARGET_ESP32P4
|
||||
default 0
|
||||
help
|
||||
Set GPIO number used by RMII REF CLK input to loopback internally generated RMII CLK output.
|
||||
See datasheet for available GPIOs.
|
||||
|
||||
if SOC_EMAC_USE_MULTI_IO_MUX
|
||||
config EXAMPLE_ETH_RMII_TX_EN_GPIO
|
||||
int "RMII TX_EN GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 49 if IDF_TARGET_ESP32P4
|
||||
default 0
|
||||
help
|
||||
Set the GPIO number used by RMII TX_EN signal.
|
||||
See datasheet for available GPIOs.
|
||||
|
||||
config EXAMPLE_ETH_RMII_TXD0_GPIO
|
||||
int "RMII TXD0 GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 34 if IDF_TARGET_ESP32P4
|
||||
default 0
|
||||
help
|
||||
Set the GPIO number used by RMII TXD0 signal.
|
||||
See datasheet for available GPIOs.
|
||||
|
||||
config EXAMPLE_ETH_RMII_TXD1_GPIO
|
||||
int "RMII TXD1 GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 35 if IDF_TARGET_ESP32P4
|
||||
default 0
|
||||
help
|
||||
Set the GPIO number used by RMII TXD1 signal.
|
||||
See datasheet for available GPIOs.
|
||||
|
||||
config EXAMPLE_ETH_RMII_CRS_DV_GPIO
|
||||
int "RMII CRS_DV GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_IN_RANGE_MAX
|
||||
default 28 if IDF_TARGET_ESP32P4
|
||||
default 0
|
||||
help
|
||||
Set the GPIO number used by RMII CRS_DV signal.
|
||||
See datasheet for available GPIOs.
|
||||
|
||||
config EXAMPLE_ETH_RMII_RXD0_GPIO
|
||||
int "RMII RXD0 GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_IN_RANGE_MAX
|
||||
default 29 if IDF_TARGET_ESP32P4
|
||||
default 0
|
||||
help
|
||||
Set the GPIO number used by RMII RXD0 signal.
|
||||
See datasheet for available GPIOs.
|
||||
|
||||
config EXAMPLE_ETH_RMII_RXD1_GPIO
|
||||
int "RMII RXD1 GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_IN_RANGE_MAX
|
||||
default 30 if IDF_TARGET_ESP32P4
|
||||
default 0
|
||||
help
|
||||
Set the GPIO number used by RMII RXD1 signal.
|
||||
See datasheet for available GPIOs.
|
||||
|
||||
endif # SOC_EMAC_USE_MULTI_IO_MUX
|
||||
|
||||
endif # EXAMPLE_ETH_PHY_INTERFACE_RMII
|
||||
|
||||
config EXAMPLE_ETH_MDC_GPIO
|
||||
int "SMI MDC GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 23 if IDF_TARGET_ESP32
|
||||
default 31 if IDF_TARGET_ESP32P4
|
||||
help
|
||||
Set the GPIO number used by SMI MDC.
|
||||
|
||||
config EXAMPLE_ETH_MDIO_GPIO
|
||||
int "SMI MDIO GPIO number"
|
||||
range ENV_GPIO_RANGE_MIN ENV_GPIO_OUT_RANGE_MAX
|
||||
default 18 if IDF_TARGET_ESP32
|
||||
default 52 if IDF_TARGET_ESP32P4
|
||||
help
|
||||
Set the GPIO number used by SMI MDIO.
|
||||
|
||||
config EXAMPLE_ETH_PHY_ADDR
|
||||
int "PHY Address"
|
||||
range -1 31
|
||||
default 1
|
||||
help
|
||||
Set PHY address according your board schematic.
|
||||
Set to -1 to driver find the PHY address automatically.
|
||||
|
||||
config EXAMPLE_ETH_PHY_RST_GPIO
|
||||
int "PHY Reset GPIO number"
|
||||
range -1 ENV_GPIO_OUT_RANGE_MAX
|
||||
default 5 if IDF_TARGET_ESP32
|
||||
default 51 if IDF_TARGET_ESP32P4
|
||||
help
|
||||
Set the GPIO number used to reset PHY chip.
|
||||
Set to -1 to disable PHY chip hardware reset.
|
||||
|
||||
menuconfig EXAMPLE_ETH_PHY_RST_TIMING_EN
|
||||
bool "PHY Reset Timing configuration"
|
||||
default n
|
||||
help
|
||||
Default reset timing configuration is set conservatively. If you need faster response and
|
||||
your chip supports it, enable and configure it. See PHY datasheet "AC Specification" section.
|
||||
|
||||
config EXAMPLE_ETH_PHY_RST_ASSERT_TIME_US
|
||||
int "PHY Reset Assert Time (microseconds)"
|
||||
depends on EXAMPLE_ETH_PHY_RST_TIMING_EN
|
||||
range 0 100000
|
||||
default 10000
|
||||
help
|
||||
Time in microseconds to assert the PHY reset signal.
|
||||
This should be long enough to ensure the PHY chip is properly reset.
|
||||
|
||||
config EXAMPLE_ETH_PHY_RST_DELAY_MS
|
||||
int "PHY Post-Reset Delay (milliseconds)"
|
||||
depends on EXAMPLE_ETH_PHY_RST_TIMING_EN
|
||||
range -1 4000
|
||||
default 10
|
||||
help
|
||||
Delay in milliseconds after releasing the PHY reset signal.
|
||||
This allows the PHY chip to stabilize before communication begins.
|
||||
When no delay required, set -1.
|
||||
|
||||
config EXAMPLE_ETH_DEINIT_AFTER_S
|
||||
int "Stop and deinit Ethernet after elapsing number of secs"
|
||||
range -1 300
|
||||
int "Deinitialize Ethernet after (seconds)"
|
||||
range -1 3600
|
||||
default -1
|
||||
help
|
||||
This option is for demonstration purposes only to demonstrate deinitialization of the Ethernet driver.
|
||||
Set to -1 to not deinitialize.
|
||||
|
||||
endmenu
|
||||
|
||||
@@ -1,23 +1,145 @@
|
||||
/* Ethernet Basic Example
|
||||
|
||||
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
||||
|
||||
Unless required by applicable law or agreed to in writing, this
|
||||
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
||||
CONDITIONS OF ANY KIND, either express or implied.
|
||||
*/
|
||||
/*
|
||||
* SPDX-FileCopyrightText: 2025 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
*/
|
||||
#include <stdio.h>
|
||||
#include <string.h>
|
||||
#include <stdlib.h>
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
#include "esp_netif.h"
|
||||
#include "esp_eth.h"
|
||||
#include "esp_event.h"
|
||||
#include "esp_log.h"
|
||||
#include "ethernet_init.h"
|
||||
#include "esp_check.h"
|
||||
#include "sdkconfig.h"
|
||||
|
||||
static const char *TAG = "eth_example";
|
||||
static const char *TAG = "eth_basic_example";
|
||||
|
||||
/**
|
||||
* @brief Initialize Ethernet driver with generic PHY (all IEEE 802.3 compliant PHYs)
|
||||
*
|
||||
*
|
||||
* @param[out] eth_handle_out initialized Ethernet driver handle
|
||||
* @return
|
||||
* - ESP_OK on success
|
||||
* - ESP_ERR_INVALID_ARG when passed invalid pointer
|
||||
* - ESP_FAIL on any other failure
|
||||
*/
|
||||
static esp_err_t eth_init(esp_eth_handle_t *eth_handle_out)
|
||||
{
|
||||
if (eth_handle_out == NULL) {
|
||||
ESP_LOGE(TAG, "invalid argument: eth_handle_out cannot be NULL");
|
||||
return ESP_ERR_INVALID_ARG;
|
||||
}
|
||||
|
||||
// Init common MAC and PHY configs to default
|
||||
eth_mac_config_t mac_config = ETH_MAC_DEFAULT_CONFIG();
|
||||
eth_phy_config_t phy_config = ETH_PHY_DEFAULT_CONFIG();
|
||||
|
||||
// Update PHY config based on board specific configuration
|
||||
phy_config.phy_addr = CONFIG_EXAMPLE_ETH_PHY_ADDR;
|
||||
phy_config.reset_gpio_num = CONFIG_EXAMPLE_ETH_PHY_RST_GPIO;
|
||||
#if CONFIG_EXAMPLE_ETH_PHY_RST_TIMING_EN
|
||||
phy_config.hw_reset_assert_time_us = CONFIG_EXAMPLE_ETH_PHY_RST_ASSERT_TIME_US;
|
||||
phy_config.post_hw_reset_delay_ms = CONFIG_EXAMPLE_ETH_PHY_RST_DELAY_MS;
|
||||
#endif // CONFIG_EXAMPLE_ETH_PHY_RST_TIMING_EN
|
||||
|
||||
// Init vendor specific MAC config to default
|
||||
eth_esp32_emac_config_t esp32_emac_config = ETH_ESP32_EMAC_DEFAULT_CONFIG();
|
||||
// Update vendor specific MAC config based on board configuration
|
||||
esp32_emac_config.smi_gpio.mdc_num = CONFIG_EXAMPLE_ETH_MDC_GPIO;
|
||||
esp32_emac_config.smi_gpio.mdio_num = CONFIG_EXAMPLE_ETH_MDIO_GPIO;
|
||||
|
||||
#if CONFIG_EXAMPLE_ETH_PHY_INTERFACE_RMII
|
||||
// Configure RMII based on Kconfig when non-default configuration selected
|
||||
esp32_emac_config.interface = EMAC_DATA_INTERFACE_RMII;
|
||||
|
||||
// Configure RMII clock mode and GPIO
|
||||
#if CONFIG_EXAMPLE_ETH_RMII_CLK_INPUT
|
||||
esp32_emac_config.clock_config.rmii.clock_mode = EMAC_CLK_EXT_IN;
|
||||
#else // CONFIG_EXAMPLE_ETH_RMII_CLK_OUTPUT
|
||||
esp32_emac_config.clock_config.rmii.clock_mode = EMAC_CLK_OUT;
|
||||
#endif
|
||||
esp32_emac_config.clock_config.rmii.clock_gpio = CONFIG_EXAMPLE_ETH_RMII_CLK_GPIO;
|
||||
|
||||
#if CONFIG_EXAMPLE_ETH_RMII_CLK_EXT_LOOPBACK_EN
|
||||
esp32_emac_config.clock_config.rmii.clock_loopback_gpio = CONFIG_EXAMPLE_ETH_RMII_CLK_EXT_LOOPBACK_IN_GPIO;
|
||||
#endif
|
||||
|
||||
#if SOC_EMAC_USE_MULTI_IO_MUX
|
||||
// Configure RMII datapane GPIOs
|
||||
esp32_emac_config.emac_dataif_gpio.rmii.tx_en_num = CONFIG_EXAMPLE_ETH_RMII_TX_EN_GPIO;
|
||||
esp32_emac_config.emac_dataif_gpio.rmii.txd0_num = CONFIG_EXAMPLE_ETH_RMII_TXD0_GPIO;
|
||||
esp32_emac_config.emac_dataif_gpio.rmii.txd1_num = CONFIG_EXAMPLE_ETH_RMII_TXD1_GPIO;
|
||||
esp32_emac_config.emac_dataif_gpio.rmii.crs_dv_num = CONFIG_EXAMPLE_ETH_RMII_CRS_DV_GPIO;
|
||||
esp32_emac_config.emac_dataif_gpio.rmii.rxd0_num = CONFIG_EXAMPLE_ETH_RMII_RXD0_GPIO;
|
||||
esp32_emac_config.emac_dataif_gpio.rmii.rxd1_num = CONFIG_EXAMPLE_ETH_RMII_RXD1_GPIO;
|
||||
#endif // SOC_EMAC_USE_MULTI_IO_MUX
|
||||
#endif // CONFIG_EXAMPLE_ETH_PHY_INTERFACE_RMII
|
||||
|
||||
// Create new ESP32 Ethernet MAC instance
|
||||
esp_eth_mac_t *mac = esp_eth_mac_new_esp32(&esp32_emac_config, &mac_config);
|
||||
if (mac == NULL) {
|
||||
ESP_LOGE(TAG, "create MAC instance failed");
|
||||
return ESP_FAIL;
|
||||
}
|
||||
|
||||
// Create new generic PHY instance
|
||||
esp_eth_phy_t *phy = esp_eth_phy_new_generic(&phy_config);
|
||||
if (phy == NULL) {
|
||||
ESP_LOGE(TAG, "create PHY instance failed");
|
||||
mac->del(mac);
|
||||
return ESP_FAIL;
|
||||
}
|
||||
|
||||
// Init Ethernet driver to default and install it
|
||||
esp_eth_handle_t eth_handle = NULL;
|
||||
esp_eth_config_t config = ETH_DEFAULT_CONFIG(mac, phy);
|
||||
if (esp_eth_driver_install(&config, ð_handle) != ESP_OK) {
|
||||
ESP_LOGE(TAG, "Ethernet driver install failed");
|
||||
mac->del(mac);
|
||||
phy->del(phy);
|
||||
return ESP_FAIL;
|
||||
}
|
||||
|
||||
*eth_handle_out = eth_handle;
|
||||
|
||||
return ESP_OK;
|
||||
}
|
||||
|
||||
#if CONFIG_EXAMPLE_ETH_DEINIT_AFTER_S >= 0
|
||||
/**
|
||||
* @brief De-initialize Ethernet driver
|
||||
* @note Ethernet driver must be stopped prior calling this function.
|
||||
*
|
||||
* @param[in] eth_handle Ethernet driver to be de-initialized
|
||||
* @return
|
||||
* - ESP_OK on success
|
||||
* - ESP_ERR_INVALID_ARG when passed invalid pointer
|
||||
*/
|
||||
static esp_err_t eth_deinit(esp_eth_handle_t eth_handle)
|
||||
{
|
||||
ESP_RETURN_ON_FALSE(eth_handle != NULL, ESP_ERR_INVALID_ARG, TAG, "Ethernet handle cannot be NULL");
|
||||
|
||||
esp_eth_mac_t *mac = NULL;
|
||||
esp_eth_phy_t *phy = NULL;
|
||||
esp_eth_get_mac_instance(eth_handle, &mac);
|
||||
esp_eth_get_phy_instance(eth_handle, &phy);
|
||||
ESP_RETURN_ON_ERROR(esp_eth_driver_uninstall(eth_handle), TAG, "Ethernet %p uninstall failed", eth_handle);
|
||||
|
||||
if (mac != NULL) {
|
||||
mac->del(mac);
|
||||
}
|
||||
if (phy != NULL) {
|
||||
phy->del(phy);
|
||||
}
|
||||
|
||||
return ESP_OK;
|
||||
}
|
||||
#endif // CONFIG_EXAMPLE_ETH_DEINIT_AFTER_S >= 0
|
||||
|
||||
/** Event handler for Ethernet events */
|
||||
static void eth_event_handler(void *arg, esp_event_base_t event_base,
|
||||
@@ -66,73 +188,40 @@ static void got_ip_event_handler(void *arg, esp_event_base_t event_base,
|
||||
void app_main(void)
|
||||
{
|
||||
// Initialize Ethernet driver
|
||||
uint8_t eth_port_cnt = 0;
|
||||
esp_eth_handle_t *eth_handles;
|
||||
ESP_ERROR_CHECK(example_eth_init(ð_handles, ð_port_cnt));
|
||||
esp_eth_handle_t eth_handle;
|
||||
ESP_ERROR_CHECK(eth_init(ð_handle));
|
||||
|
||||
// Initialize TCP/IP network interface aka the esp-netif (should be called only once in application)
|
||||
ESP_ERROR_CHECK(esp_netif_init());
|
||||
// Create default event loop that running in background
|
||||
ESP_ERROR_CHECK(esp_event_loop_create_default());
|
||||
|
||||
esp_netif_t *eth_netifs[eth_port_cnt];
|
||||
esp_eth_netif_glue_handle_t eth_netif_glues[eth_port_cnt];
|
||||
|
||||
// Create instance(s) of esp-netif for Ethernet(s)
|
||||
if (eth_port_cnt == 1) {
|
||||
// Use ESP_NETIF_DEFAULT_ETH when just one Ethernet interface is used and you don't need to modify
|
||||
// default esp-netif configuration parameters.
|
||||
esp_netif_config_t cfg = ESP_NETIF_DEFAULT_ETH();
|
||||
eth_netifs[0] = esp_netif_new(&cfg);
|
||||
eth_netif_glues[0] = esp_eth_new_netif_glue(eth_handles[0]);
|
||||
// Attach Ethernet driver to TCP/IP stack
|
||||
ESP_ERROR_CHECK(esp_netif_attach(eth_netifs[0], eth_netif_glues[0]));
|
||||
} else {
|
||||
// Use ESP_NETIF_INHERENT_DEFAULT_ETH when multiple Ethernet interfaces are used and so you need to modify
|
||||
// esp-netif configuration parameters for each interface (name, priority, etc.).
|
||||
esp_netif_inherent_config_t esp_netif_config = ESP_NETIF_INHERENT_DEFAULT_ETH();
|
||||
esp_netif_config_t cfg_spi = {
|
||||
.base = &esp_netif_config,
|
||||
.stack = ESP_NETIF_NETSTACK_DEFAULT_ETH
|
||||
};
|
||||
char if_key_str[10];
|
||||
char if_desc_str[10];
|
||||
char num_str[3];
|
||||
for (int i = 0; i < eth_port_cnt; i++) {
|
||||
itoa(i, num_str, 10);
|
||||
strcat(strcpy(if_key_str, "ETH_"), num_str);
|
||||
strcat(strcpy(if_desc_str, "eth"), num_str);
|
||||
esp_netif_config.if_key = if_key_str;
|
||||
esp_netif_config.if_desc = if_desc_str;
|
||||
esp_netif_config.route_prio -= i*5;
|
||||
eth_netifs[i] = esp_netif_new(&cfg_spi);
|
||||
eth_netif_glues[i] = esp_eth_new_netif_glue(eth_handles[i]);
|
||||
// Attach Ethernet driver to TCP/IP stack
|
||||
ESP_ERROR_CHECK(esp_netif_attach(eth_netifs[i], eth_netif_glues[i]));
|
||||
}
|
||||
}
|
||||
// Create instance of esp-netif for Ethernet
|
||||
// Use ESP_NETIF_DEFAULT_ETH when just one Ethernet interface is used and you don't need to modify
|
||||
// default esp-netif configuration parameters.
|
||||
esp_netif_config_t cfg = ESP_NETIF_DEFAULT_ETH();
|
||||
esp_netif_t *eth_netif = esp_netif_new(&cfg);
|
||||
esp_eth_netif_glue_handle_t eth_netif_glue = esp_eth_new_netif_glue(eth_handle);
|
||||
// Attach Ethernet driver to TCP/IP stack
|
||||
ESP_ERROR_CHECK(esp_netif_attach(eth_netif, eth_netif_glue));
|
||||
|
||||
// Register user defined event handlers
|
||||
ESP_ERROR_CHECK(esp_event_handler_register(ETH_EVENT, ESP_EVENT_ANY_ID, ð_event_handler, NULL));
|
||||
ESP_ERROR_CHECK(esp_event_handler_register(IP_EVENT, IP_EVENT_ETH_GOT_IP, &got_ip_event_handler, NULL));
|
||||
|
||||
// Start Ethernet driver state machine
|
||||
for (int i = 0; i < eth_port_cnt; i++) {
|
||||
ESP_ERROR_CHECK(esp_eth_start(eth_handles[i]));
|
||||
}
|
||||
ESP_ERROR_CHECK(esp_eth_start(eth_handle));
|
||||
|
||||
#if CONFIG_EXAMPLE_ETH_DEINIT_AFTER_S >= 0
|
||||
// For demonstration purposes, wait and then deinit Ethernet network
|
||||
vTaskDelay(pdMS_TO_TICKS(CONFIG_EXAMPLE_ETH_DEINIT_AFTER_S * 1000));
|
||||
ESP_LOGI(TAG, "stop and deinitialize Ethernet network...");
|
||||
// Stop Ethernet driver state machine and destroy netif
|
||||
for (int i = 0; i < eth_port_cnt; i++) {
|
||||
ESP_ERROR_CHECK(esp_eth_stop(eth_handles[i]));
|
||||
ESP_ERROR_CHECK(esp_eth_del_netif_glue(eth_netif_glues[i]));
|
||||
esp_netif_destroy(eth_netifs[i]);
|
||||
}
|
||||
ESP_ERROR_CHECK(esp_eth_stop(eth_handle));
|
||||
ESP_ERROR_CHECK(esp_eth_del_netif_glue(eth_netif_glue));
|
||||
esp_netif_destroy(eth_netif);
|
||||
esp_netif_deinit();
|
||||
ESP_ERROR_CHECK(example_eth_deinit(eth_handles, eth_port_cnt));
|
||||
ESP_ERROR_CHECK(eth_deinit(eth_handle));
|
||||
ESP_ERROR_CHECK(esp_event_handler_unregister(IP_EVENT, IP_EVENT_ETH_GOT_IP, got_ip_event_handler));
|
||||
ESP_ERROR_CHECK(esp_event_handler_unregister(ETH_EVENT, ESP_EVENT_ANY_ID, eth_event_handler));
|
||||
ESP_ERROR_CHECK(esp_event_loop_delete_default());
|
||||
|
||||
@@ -5,19 +5,17 @@ import subprocess
|
||||
|
||||
import pytest
|
||||
from pytest_embedded import Dut
|
||||
from pytest_embedded_idf.utils import idf_parametrize
|
||||
|
||||
|
||||
@pytest.mark.parametrize(
|
||||
'config',
|
||||
'config, target',
|
||||
[
|
||||
pytest.param('default_ip101', marks=[pytest.mark.eth_ip101]),
|
||||
pytest.param('default_generic', marks=[pytest.mark.eth_ip101]),
|
||||
pytest.param('default_dm9051', marks=[pytest.mark.eth_dm9051]),
|
||||
pytest.param('defaults', 'esp32', marks=[pytest.mark.eth_ip101]),
|
||||
pytest.param('lan8720_esp32', 'esp32', marks=[pytest.mark.eth_lan8720]),
|
||||
pytest.param('defaults', 'esp32p4', marks=[pytest.mark.eth_ip101]),
|
||||
],
|
||||
indirect=True,
|
||||
indirect=['target'],
|
||||
)
|
||||
@idf_parametrize('target', ['esp32'], indirect=['target'])
|
||||
def test_esp_eth_basic(dut: Dut) -> None:
|
||||
# wait for ip received
|
||||
dut_ip = dut.expect(r'esp_netif_handlers: .+ ip: (\d+\.\d+\.\d+\.\d+),').group(1)
|
||||
@@ -25,4 +23,5 @@ def test_esp_eth_basic(dut: Dut) -> None:
|
||||
param = '-n' if platform.system().lower() == 'windows' else '-c'
|
||||
command = ['ping', param, '1', dut_ip]
|
||||
output = subprocess.run(command, capture_output=True)
|
||||
assert 'unreachable' not in str(output.stdout)
|
||||
if 'unreachable' in str(output.stdout):
|
||||
raise RuntimeError('Host unreachable')
|
||||
|
||||
@@ -1,5 +0,0 @@
|
||||
CONFIG_EXAMPLE_USE_SPI_ETHERNET=y
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=n
|
||||
CONFIG_EXAMPLE_SPI_ETHERNETS_NUM=1
|
||||
CONFIG_EXAMPLE_USE_DM9051=y
|
||||
CONFIG_EXAMPLE_ETH_SPI_CLOCK_MHZ=20
|
||||
@@ -1,9 +0,0 @@
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
CONFIG_EXAMPLE_ETH_PHY_ADDR=1
|
||||
|
||||
CONFIG_ETH_ENABLED=y
|
||||
CONFIG_ETH_USE_ESP32_EMAC=y
|
||||
@@ -1,9 +0,0 @@
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
CONFIG_EXAMPLE_ETH_PHY_ADDR=1
|
||||
|
||||
CONFIG_ETH_ENABLED=y
|
||||
CONFIG_ETH_USE_ESP32_EMAC=y
|
||||
@@ -0,0 +1,2 @@
|
||||
CONFIG_ETH_ENABLED=y
|
||||
CONFIG_ETH_USE_ESP32_EMAC=y
|
||||
@@ -0,0 +1,8 @@
|
||||
# RMII GPIO Configuration to align with LAN8720 test board
|
||||
CONFIG_IDF_TARGET="esp32"
|
||||
|
||||
CONFIG_EXAMPLE_ETH_PHY_INTERFACE_RMII=y
|
||||
CONFIG_EXAMPLE_ETH_RMII_CLK_OUTPUT=y
|
||||
CONFIG_EXAMPLE_ETH_RMII_CLK_GPIO=17
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
CONFIG_EXAMPLE_ETH_PHY_ADDR=0
|
||||
@@ -0,0 +1,2 @@
|
||||
CONFIG_ETH_ENABLED=y
|
||||
CONFIG_ETH_USE_ESP32_EMAC=y
|
||||
@@ -15,9 +15,12 @@ The cli environment in the example is based on the [console component](https://d
|
||||
|
||||
### Hardware Required
|
||||
|
||||
To run this example, it's recommended that you have an official ESP32 Ethernet development board - [ESP32-Ethernet-Kit](https://docs.espressif.com/projects/esp-idf/en/latest/hw-reference/get-started-ethernet-kit.html). This example should also work for 3rd party ESP32 board as long as it's integrated with a supported Ethernet PHY chip. Up until now, ESP-IDF supports up to four Ethernet PHY: `LAN8720`, `IP101`, `DP83848` and `RTL8201`, additional PHY drivers should be implemented by users themselves.
|
||||
To run this example, it's recommended that you have an official ESP32 Ethernet development board - [ESP32-Ethernet-Kit](https://docs.espressif.com/projects/esp-idf/en/latest/hw-reference/get-started-ethernet-kit.html). This example should also work for 3rd party ESP32 board as long as it's integrated with a supported Ethernet PHY chip. Espressif supports multiple Ethernet PHYs. The full list of supported PHYs is available at [esp-eth-drivers](https://github.com/espressif/esp-eth-drivers) repository. If your PHY is IEEE 802.3 compliant, you can use `Generic PHY` driver for most use cases.
|
||||
|
||||
Besides that, `esp_eth` component can drive third-party Ethernet module which integrates MAC and PHY and provides common communication interface (e.g. SPI, USB, etc). This example will take the **DM9051** as an example, illustrating how to install the Ethernet driver in the same manner.
|
||||
Besides that, `esp_eth` component can drive third-party Ethernet module which integrates MAC and PHY and provides common communication interface (e.g. SPI, USB, etc). The full list of supported SPI Ethernet modules is also available at [esp-eth-drivers](https://github.com/espressif/esp-eth-drivers) repository.
|
||||
|
||||
> [!NOTE]
|
||||
> `Generic 802.3 PHY` basic functionality should always work for PHY compliant with IEEE 802.3. However, some specific features might be limited. A typical example is loopback functionality, where certain PHYs may require setting a specific speed mode to operate correctly. If this is a case, use driver tailored to that specific chip.
|
||||
|
||||
#### Pin Assignment
|
||||
|
||||
|
||||
@@ -2,6 +2,6 @@ dependencies:
|
||||
cmd_system:
|
||||
path: ${IDF_PATH}/examples/system/console/advanced/components/cmd_system
|
||||
espressif/ethernet_init:
|
||||
version: "0.7.0"
|
||||
version: "*"
|
||||
espressif/iperf-cmd:
|
||||
version: "~0.1.1"
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
dependencies:
|
||||
espressif/ethernet_init:
|
||||
version: "0.7.0"
|
||||
version: "*"
|
||||
esp_eth_time:
|
||||
path: ${IDF_PATH}/examples/ethernet/ptp/components/esp_eth_time
|
||||
ptpd:
|
||||
|
||||
@@ -1,3 +1,3 @@
|
||||
dependencies:
|
||||
espressif/ethernet_init:
|
||||
version: "0.7.0"
|
||||
version: "*"
|
||||
|
||||
@@ -17,13 +17,12 @@ The similarities on MAC layer between Ethernet and Wi-Fi make it easy to forward
|
||||
|
||||
### Hardware Required
|
||||
|
||||
To run this example, it's recommended that you have an official ESP32 Ethernet development board - [ESP32-Ethernet-Kit](https://docs.espressif.com/projects/esp-idf/en/latest/hw-reference/get-started-ethernet-kit.html). This example should also work for 3rd party ESP32 board as long as it's integrated with a supported Ethernet PHY chip. Up until now, ESP-IDF supports up to four Ethernet PHY: `LAN8720`, `IP101`, `DP83848` and `RTL8201`, additional PHY drivers should be implemented by users themselves.
|
||||
To run this example, it's recommended that you have an official ESP32 Ethernet development board - [ESP32-Ethernet-Kit](https://docs.espressif.com/projects/esp-idf/en/latest/hw-reference/get-started-ethernet-kit.html). This example should also work for 3rd party ESP32 board as long as it's integrated with a supported Ethernet PHY chip. Espressif supports multiple Ethernet PHYs. The full list of supported PHYs is available at [esp-eth-drivers](https://github.com/espressif/esp-eth-drivers) repository. If your PHY is IEEE 802.3 compliant, you can use `Generic PHY` driver for most use cases.
|
||||
|
||||
Besides that, `esp_eth` component can drive third-party Ethernet module which integrates MAC and PHY and provides common communication interface (e.g. SPI, USB, etc). This example will take the **DM9051** as an example, illustrating how to install the Ethernet driver in the same manner.
|
||||
Besides that, `esp_eth` component can drive third-party Ethernet module which integrates MAC and PHY and provides common communication interface (e.g. SPI, USB, etc). The full list of supported SPI Ethernet modules is also available at [esp-eth-drivers](https://github.com/espressif/esp-eth-drivers) repository.
|
||||
|
||||
#### Pin Assignment
|
||||
|
||||
See common pin assignments for Ethernet examples from [upper level](../README.md#common-pin-assignments).
|
||||
> [!NOTE]
|
||||
> `Generic 802.3 PHY` basic functionality should always work for PHY compliant with IEEE 802.3. However, some specific features might be limited. A typical example is loopback functionality, where certain PHYs may require setting a specific speed mode to operate correctly. If this is a case, use driver tailored to that specific chip.
|
||||
|
||||
### Configure the project
|
||||
|
||||
|
||||
@@ -1,3 +1,3 @@
|
||||
dependencies:
|
||||
espressif/ethernet_init:
|
||||
version: "0.7.0"
|
||||
version: "*"
|
||||
|
||||
@@ -1,4 +1,4 @@
|
||||
dependencies:
|
||||
pcap: "^1.0.0"
|
||||
espressif/ethernet_init:
|
||||
version: "0.7.0"
|
||||
version: "*"
|
||||
|
||||
@@ -8,6 +8,6 @@ dependencies:
|
||||
dns_server:
|
||||
path: ${IDF_PATH}/examples/protocols/http_server/captive_portal/components/dns_server
|
||||
espressif/ethernet_init:
|
||||
version: "0.7.0"
|
||||
version: "*"
|
||||
espressif/network_provisioning:
|
||||
version: "^1.0.5"
|
||||
|
||||
@@ -1,3 +1,3 @@
|
||||
dependencies:
|
||||
espressif/ethernet_init:
|
||||
version: "0.7.0"
|
||||
version: "*"
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -3,7 +3,7 @@ CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -3,7 +3,7 @@ CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -3,7 +3,7 @@ CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -3,7 +3,7 @@ CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -3,7 +3,7 @@ CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -5,7 +5,7 @@ CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE_PATH="certs"
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -7,7 +7,7 @@ CONFIG_MBEDTLS_DYNAMIC_FREE_CONFIG_DATA=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -13,7 +13,7 @@ CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -3,7 +3,7 @@ CONFIG_BROKER_URL="FROM_STDIN"
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -2,7 +2,7 @@ CONFIG_BROKER_URI="ws://${EXAMPLE_MQTT_BROKER_WS}/ws"
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -3,7 +3,7 @@ CONFIG_BROKER_CERTIFICATE_OVERRIDE="${EXAMPLE_MQTT_BROKER_CERTIFICATE}"
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
+1
-1
@@ -7,7 +7,7 @@ CONFIG_EXAMPLE_CONNECT_IPV6=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
+1
-1
@@ -7,7 +7,7 @@ CONFIG_EXAMPLE_CONNECT_IPV6=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=31
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=52
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=51
|
||||
@@ -1,3 +1,3 @@
|
||||
dependencies:
|
||||
espressif/ethernet_init:
|
||||
version: "0.7.0"
|
||||
version: "*"
|
||||
|
||||
@@ -6,7 +6,7 @@ CONFIG_EXAMPLE_OTA_RECV_TIMEOUT=3000
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -14,7 +14,7 @@ CONFIG_BOOTLOADER_APP_SECURE_VERSION=1
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -7,7 +7,7 @@ CONFIG_EXAMPLE_ENABLE_OTA_RESUMPTION=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -9,7 +9,7 @@ CONFIG_EXAMPLE_ENABLE_OTA_RESUMPTION=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -10,7 +10,7 @@ CONFIG_LOG_DEFAULT_LEVEL_DEBUG=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -6,7 +6,7 @@ CONFIG_EXAMPLE_OTA_RECV_TIMEOUT=3000
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -14,7 +14,7 @@ CONFIG_SECURE_BOOT_SIGNING_KEY="test/secure_boot_signing_key_ecdsa.pem"
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -16,7 +16,7 @@ CONFIG_SECURE_BOOT_ALLOW_SHORT_APP_PARTITION=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -5,7 +5,7 @@ CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -3,7 +3,7 @@ CONFIG_EXAMPLE_SKIP_COMMON_NAME_CHECK=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -3,7 +3,7 @@ CONFIG_EXAMPLE_SKIP_COMMON_NAME_CHECK=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
@@ -3,7 +3,7 @@ CONFIG_EXAMPLE_SKIP_COMMON_NAME_CHECK=y
|
||||
CONFIG_EXAMPLE_CONNECT_ETHERNET=y
|
||||
CONFIG_EXAMPLE_CONNECT_WIFI=n
|
||||
CONFIG_EXAMPLE_USE_INTERNAL_ETHERNET=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_IP101=y
|
||||
CONFIG_EXAMPLE_ETH_PHY_GENERIC=y
|
||||
CONFIG_EXAMPLE_ETH_MDC_GPIO=23
|
||||
CONFIG_EXAMPLE_ETH_MDIO_GPIO=18
|
||||
CONFIG_EXAMPLE_ETH_PHY_RST_GPIO=5
|
||||
|
||||
Reference in New Issue
Block a user