diff --git a/components/esp_hw_support/port/esp32/include/soc/rtc.h b/components/esp_hw_support/port/esp32/include/soc/rtc.h
index 652439c2b7..bd2433c423 100644
--- a/components/esp_hw_support/port/esp32/include/soc/rtc.h
+++ b/components/esp_hw_support/port/esp32/include/soc/rtc.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -172,6 +172,11 @@ void rtc_clk_32k_enable(bool en);
  */
 void rtc_clk_32k_enable_external(void);
 
+/**
+ * @brief Disable 32 kHz XTAL oscillator input.
+ */
+void rtc_clk_32k_disable_external(void);
+
 /**
  * @brief Get the state of 32k XTAL oscillator
  * @return true if 32k XTAL oscillator has been enabled
diff --git a/components/esp_hw_support/port/esp32/rtc_clk.c b/components/esp_hw_support/port/esp32/rtc_clk.c
index cdf9871078..ac40e1f2e3 100644
--- a/components/esp_hw_support/port/esp32/rtc_clk.c
+++ b/components/esp_hw_support/port/esp32/rtc_clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -115,6 +115,11 @@ void rtc_clk_32k_enable_external(void)
     rtc_clk_32k_enable_common(CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL);
 }
 
+void rtc_clk_32k_disable_external(void)
+{
+    clk_ll_xtal32k_disable();
+}
+
 /* Helping external 32kHz crystal to start up.
  * External crystal connected to outputs GPIO32 GPIO33.
  * Forms N pulses with a frequency of about 32KHz on the outputs of the crystal.
diff --git a/components/esp_hw_support/port/esp32c2/include/soc/rtc.h b/components/esp_hw_support/port/esp32c2/include/soc/rtc.h
index a82437a95b..3eb96b63ba 100644
--- a/components/esp_hw_support/port/esp32c2/include/soc/rtc.h
+++ b/components/esp_hw_support/port/esp32c2/include/soc/rtc.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2020-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -257,6 +257,11 @@ void rtc_clk_xtal_freq_update(soc_xtal_freq_t xtal_freq);
  */
 void rtc_clk_32k_enable_external(void);
 
+/**
+ * @brief Disable 32KHz external oscillator
+ */
+void rtc_clk_32k_disable_external(void);
+
 /**
  * @brief Enable or disable 8 MHz internal oscillator
  *
diff --git a/components/esp_hw_support/port/esp32c2/rtc_clk.c b/components/esp_hw_support/port/esp32c2/rtc_clk.c
index a36a186a23..40fd737c3f 100644
--- a/components/esp_hw_support/port/esp32c2/rtc_clk.c
+++ b/components/esp_hw_support/port/esp32c2/rtc_clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2020-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -37,6 +37,12 @@ void rtc_clk_32k_enable_external(void)
     REG_SET_BIT(RTC_CNTL_PAD_HOLD_REG, BIT(EXT_OSC_SLOW_GPIO_NUM));
 }
 
+void rtc_clk_32k_disable_external(void)
+{
+    PIN_INPUT_DISABLE(IO_MUX_GPIO0_REG);
+    REG_CLR_BIT(RTC_CNTL_PAD_HOLD_REG, BIT(EXT_OSC_SLOW_GPIO_NUM));
+}
+
 void rtc_clk_8m_enable(bool clk_8m_en, bool d256_en)
 {
     if (clk_8m_en) {
diff --git a/components/esp_hw_support/port/esp32c3/include/soc/rtc.h b/components/esp_hw_support/port/esp32c3/include/soc/rtc.h
index 62265e4bcd..3c993df6bd 100644
--- a/components/esp_hw_support/port/esp32c3/include/soc/rtc.h
+++ b/components/esp_hw_support/port/esp32c3/include/soc/rtc.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2020-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -263,6 +263,11 @@ void rtc_clk_32k_enable(bool en);
  */
 void rtc_clk_32k_enable_external(void);
 
+/**
+ * @brief Disable 32 kHz XTAL oscillator input.
+ */
+void rtc_clk_32k_disable_external(void);
+
 /**
  * @brief Get the state of 32k XTAL oscillator
  * @return true if 32k XTAL oscillator has been enabled
diff --git a/components/esp_hw_support/port/esp32c3/rtc_clk.c b/components/esp_hw_support/port/esp32c3/rtc_clk.c
index 549e3c426c..ed9aaf2b1d 100644
--- a/components/esp_hw_support/port/esp32c3/rtc_clk.c
+++ b/components/esp_hw_support/port/esp32c3/rtc_clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2020-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -56,6 +56,13 @@ void rtc_clk_32k_enable_external(void)
     clk_ll_xtal32k_enable(CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL);
 }
 
+void rtc_clk_32k_disable_external(void)
+{
+    PIN_INPUT_DISABLE(IO_MUX_GPIO0_REG);
+    CLEAR_PERI_REG_MASK(RTC_CNTL_PAD_HOLD_REG, RTC_CNTL_GPIO_PIN0_HOLD);
+    clk_ll_xtal32k_disable();
+}
+
 void rtc_clk_32k_bootstrap(uint32_t cycle)
 {
     /* No special bootstrapping needed for ESP32-C3, 'cycle' argument is to keep the signature
diff --git a/components/esp_hw_support/port/esp32c5/include/soc/rtc.h b/components/esp_hw_support/port/esp32c5/include/soc/rtc.h
index a11d201f20..59f9503e04 100644
--- a/components/esp_hw_support/port/esp32c5/include/soc/rtc.h
+++ b/components/esp_hw_support/port/esp32c5/include/soc/rtc.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2023-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -181,6 +181,11 @@ void rtc_clk_32k_enable(bool en);
  */
 void rtc_clk_32k_enable_external(void);
 
+/**
+ * @brief Disable 32 kHz XTAL oscillator input.
+ */
+void rtc_clk_32k_disable_external(void);
+
 /**
  * @brief Get the state of 32k XTAL oscillator
  * @return true if 32k XTAL oscillator has been enabled
diff --git a/components/esp_hw_support/port/esp32c5/rtc_clk.c b/components/esp_hw_support/port/esp32c5/rtc_clk.c
index 16bb71e007..77b0d59770 100644
--- a/components/esp_hw_support/port/esp32c5/rtc_clk.c
+++ b/components/esp_hw_support/port/esp32c5/rtc_clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2023-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -61,6 +61,13 @@ void rtc_clk_32k_enable_external(void)
     clk_ll_xtal32k_enable(CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL);
 }
 
+void rtc_clk_32k_disable_external(void)
+{
+    gpio_ll_input_disable(&GPIO, EXT_OSC_SLOW_GPIO_NUM);
+    REG_CLR_BIT(LP_AON_GPIO_HOLD0_REG, BIT(EXT_OSC_SLOW_GPIO_NUM));
+    clk_ll_xtal32k_disable();
+}
+
 void rtc_clk_32k_bootstrap(uint32_t cycle)
 {
     /* No special bootstrapping needed for ESP32-C5, 'cycle' argument is to keep the signature
diff --git a/components/esp_hw_support/port/esp32c6/include/soc/rtc.h b/components/esp_hw_support/port/esp32c6/include/soc/rtc.h
index 3880b325e5..287e7982ac 100644
--- a/components/esp_hw_support/port/esp32c6/include/soc/rtc.h
+++ b/components/esp_hw_support/port/esp32c6/include/soc/rtc.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2022-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -205,6 +205,11 @@ void rtc_clk_32k_enable(bool en);
  */
 void rtc_clk_32k_enable_external(void);
 
+/**
+ * @brief Disable 32 kHz XTAL oscillator input.
+ */
+void rtc_clk_32k_disable_external(void);
+
 /**
  * @brief Get the state of 32k XTAL oscillator
  * @return true if 32k XTAL oscillator has been enabled
diff --git a/components/esp_hw_support/port/esp32c6/rtc_clk.c b/components/esp_hw_support/port/esp32c6/rtc_clk.c
index c36c48d859..75c396a8eb 100644
--- a/components/esp_hw_support/port/esp32c6/rtc_clk.c
+++ b/components/esp_hw_support/port/esp32c6/rtc_clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2022-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -56,6 +56,13 @@ void rtc_clk_32k_enable_external(void)
     clk_ll_xtal32k_enable(CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL);
 }
 
+void rtc_clk_32k_disable_external(void)
+{
+    PIN_INPUT_DISABLE(IO_MUX_GPIO0_REG);
+    REG_CLR_BIT(LP_AON_GPIO_HOLD0_REG, BIT(EXT_OSC_SLOW_GPIO_NUM));
+    clk_ll_xtal32k_disable();
+}
+
 void rtc_clk_32k_bootstrap(uint32_t cycle)
 {
     /* No special bootstrapping needed for ESP32-C6, 'cycle' argument is to keep the signature
diff --git a/components/esp_hw_support/port/esp32c61/include/soc/rtc.h b/components/esp_hw_support/port/esp32c61/include/soc/rtc.h
index b041327339..ae37654021 100644
--- a/components/esp_hw_support/port/esp32c61/include/soc/rtc.h
+++ b/components/esp_hw_support/port/esp32c61/include/soc/rtc.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2024-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -181,6 +181,11 @@ void rtc_clk_32k_enable(bool en);
  */
 void rtc_clk_32k_enable_external(void);
 
+/**
+ * @brief Disable 32 kHz XTAL oscillator input.
+ */
+void rtc_clk_32k_disable_external(void);
+
 /**
  * @brief Get the state of 32k XTAL oscillator
  * @return true if 32k XTAL oscillator has been enabled
diff --git a/components/esp_hw_support/port/esp32c61/rtc_clk.c b/components/esp_hw_support/port/esp32c61/rtc_clk.c
index 5c32d17358..f6f62b5bbc 100644
--- a/components/esp_hw_support/port/esp32c61/rtc_clk.c
+++ b/components/esp_hw_support/port/esp32c61/rtc_clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2024-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -59,6 +59,13 @@ void rtc_clk_32k_enable_external(void)
     clk_ll_xtal32k_enable(CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL);
 }
 
+void rtc_clk_32k_disable_external(void)
+{
+    gpio_ll_input_disable(&GPIO, EXT_OSC_SLOW_GPIO_NUM);
+    REG_CLR_BIT(LP_AON_GPIO_HOLD0_REG, BIT(EXT_OSC_SLOW_GPIO_NUM));
+    clk_ll_xtal32k_disable();
+}
+
 void rtc_clk_32k_bootstrap(uint32_t cycle)
 {
     /* No special bootstrapping needed for ESP32-C61, 'cycle' argument is to keep the signature
diff --git a/components/esp_hw_support/port/esp32h2/include/soc/rtc.h b/components/esp_hw_support/port/esp32h2/include/soc/rtc.h
index fa820b48d8..3b60cd056a 100644
--- a/components/esp_hw_support/port/esp32h2/include/soc/rtc.h
+++ b/components/esp_hw_support/port/esp32h2/include/soc/rtc.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2020-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2020-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -207,6 +207,11 @@ void rtc_clk_32k_enable(bool en);
  */
 void rtc_clk_32k_enable_external(void);
 
+/**
+ * @brief Disable 32 kHz XTAL oscillator input.
+ */
+void rtc_clk_32k_disable_external(void);
+
 /**
  * @brief Get the state of 32k XTAL oscillator
  * @return true if 32k XTAL oscillator has been enabled
diff --git a/components/esp_hw_support/port/esp32h2/rtc_clk.c b/components/esp_hw_support/port/esp32h2/rtc_clk.c
index 7a8a82ef59..e42139a501 100644
--- a/components/esp_hw_support/port/esp32h2/rtc_clk.c
+++ b/components/esp_hw_support/port/esp32h2/rtc_clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2022-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -56,6 +56,13 @@ void rtc_clk_32k_enable_external(void)
     clk_ll_xtal32k_enable(CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL);
 }
 
+void rtc_clk_32k_disable_external(void)
+{
+    PIN_INPUT_DISABLE(IO_MUX_GPIO13_REG);
+    REG_CLR_BIT(LP_AON_GPIO_HOLD0_REG, BIT(EXT_OSC_SLOW_GPIO_NUM));
+    clk_ll_xtal32k_disable();
+}
+
 void rtc_clk_32k_bootstrap(uint32_t cycle)
 {
     /* No special bootstrapping needed for ESP32-H2, 'cycle' argument is to keep the signature
diff --git a/components/esp_hw_support/port/esp32s2/include/soc/rtc.h b/components/esp_hw_support/port/esp32s2/include/soc/rtc.h
index bee93e110e..208f059011 100644
--- a/components/esp_hw_support/port/esp32s2/include/soc/rtc.h
+++ b/components/esp_hw_support/port/esp32s2/include/soc/rtc.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -258,6 +258,11 @@ void rtc_clk_32k_enable(bool en);
  */
 void rtc_clk_32k_enable_external(void);
 
+/**
+ * @brief Disable 32 kHz XTAL oscillator input.
+ */
+void rtc_clk_32k_disable_external(void);
+
 /**
  * @brief Get the state of 32k XTAL oscillator
  * @return true if 32k XTAL oscillator has been enabled
diff --git a/components/esp_hw_support/port/esp32s2/rtc_clk.c b/components/esp_hw_support/port/esp32s2/rtc_clk.c
index 07f8074f14..a284c043ba 100644
--- a/components/esp_hw_support/port/esp32s2/rtc_clk.c
+++ b/components/esp_hw_support/port/esp32s2/rtc_clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -49,6 +49,13 @@ void rtc_clk_32k_enable_external(void)
     clk_ll_xtal32k_enable(CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL);
 }
 
+void rtc_clk_32k_disable_external(void)
+{
+    CLEAR_PERI_REG_MASK(RTC_IO_XTAL_32P_PAD_REG, RTC_IO_X32P_MUX_SEL);
+    CLEAR_PERI_REG_MASK(RTC_IO_XTAL_32N_PAD_REG, RTC_IO_X32N_MUX_SEL);
+    clk_ll_xtal32k_disable();
+}
+
 void rtc_clk_32k_bootstrap(uint32_t cycle)
 {
     /* No special bootstrapping needed for ESP32-S2, 'cycle' argument is to keep the signature
diff --git a/components/esp_hw_support/port/esp32s3/include/soc/rtc.h b/components/esp_hw_support/port/esp32s3/include/soc/rtc.h
index 1bb77a5df4..4dd9cab7e7 100644
--- a/components/esp_hw_support/port/esp32s3/include/soc/rtc.h
+++ b/components/esp_hw_support/port/esp32s3/include/soc/rtc.h
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -276,7 +276,12 @@ void rtc_clk_32k_enable(bool en);
 void rtc_clk_32k_enable_external(void);
 
 /**
- * @brief Get the state of 32k XTAL oscillator
+ * @brief Disable 32 kHz XTAL oscillator input.
+ */
+void rtc_clk_32k_disable_external(void);
+
+/**
+ * @brief Get the state of 32k XTAL oscillators
  * @return true if 32k XTAL oscillator has been enabled
  */
 bool rtc_clk_32k_enabled(void);
diff --git a/components/esp_hw_support/port/esp32s3/rtc_clk.c b/components/esp_hw_support/port/esp32s3/rtc_clk.c
index 6f4f2ea352..22dbbafa49 100644
--- a/components/esp_hw_support/port/esp32s3/rtc_clk.c
+++ b/components/esp_hw_support/port/esp32s3/rtc_clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -72,6 +72,13 @@ void rtc_clk_32k_enable_external(void)
     clk_ll_xtal32k_enable(CLK_LL_XTAL32K_ENABLE_MODE_EXTERNAL);
 }
 
+void rtc_clk_32k_disable_external(void)
+{
+    PIN_INPUT_DISABLE(IO_MUX_GPIO15_REG);
+    CLEAR_PERI_REG_MASK(RTC_CNTL_PAD_HOLD_REG, RTC_CNTL_X32P_HOLD);
+    clk_ll_xtal32k_disable();
+}
+
 void rtc_clk_32k_bootstrap(uint32_t cycle)
 {
     /* No special bootstrapping needed for ESP32-S3, 'cycle' argument is to keep the signature
diff --git a/components/esp_system/port/soc/esp32/clk.c b/components/esp_system/port/soc/esp32/clk.c
index 88f72ff947..e99ed451fa 100644
--- a/components/esp_system/port/soc/esp32/clk.c
+++ b/components/esp_system/port/soc/esp32/clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -91,7 +91,10 @@ static void select_rtc_slow_clk(slow_clk_sel_t slow_clk)
             rtc_clk_8m_enable(true, true);
         }
         rtc_clk_slow_src_set(rtc_slow_clk_src);
-
+        if (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K) {
+            rtc_clk_32k_enable(false);
+            rtc_clk_32k_disable_external();
+        }
         if (SLOW_CLK_CAL_CYCLES > 0) {
             /* TODO: 32k XTAL oscillator has some frequency drift at startup.
              * Improve calibration routine to wait until the frequency is stable.
diff --git a/components/esp_system/port/soc/esp32c2/clk.c b/components/esp_system/port/soc/esp32c2/clk.c
index 6cc267ea6c..824972f28c 100644
--- a/components/esp_system/port/soc/esp32c2/clk.c
+++ b/components/esp_system/port/soc/esp32c2/clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -180,7 +180,9 @@ static void select_rtc_slow_clk(slow_clk_sel_t slow_clk)
             rtc_clk_8m_enable(true, true);
         }
         rtc_clk_slow_src_set(rtc_slow_clk_src);
-
+        if (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_OSC_SLOW) {
+            rtc_clk_32k_disable_external();
+        }
         if (SLOW_CLK_CAL_CYCLES > 0) {
             /* TODO: 32k XTAL oscillator has some frequency drift at startup.
              * Improve calibration routine to wait until the frequency is stable.
diff --git a/components/esp_system/port/soc/esp32c3/clk.c b/components/esp_system/port/soc/esp32c3/clk.c
index ecb5d08385..d7d6b53624 100644
--- a/components/esp_system/port/soc/esp32c3/clk.c
+++ b/components/esp_system/port/soc/esp32c3/clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -176,7 +176,10 @@ static void select_rtc_slow_clk(slow_clk_sel_t slow_clk)
             rtc_clk_8m_enable(true, true);
         }
         rtc_clk_slow_src_set(rtc_slow_clk_src);
-
+        if (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K) {
+            rtc_clk_32k_enable(false);
+            rtc_clk_32k_disable_external();
+        }
         if (SLOW_CLK_CAL_CYCLES > 0) {
             /* TODO: 32k XTAL oscillator has some frequency drift at startup.
              * Improve calibration routine to wait until the frequency is stable.
diff --git a/components/esp_system/port/soc/esp32c5/clk.c b/components/esp_system/port/soc/esp32c5/clk.c
index bf48b52256..836286748c 100644
--- a/components/esp_system/port/soc/esp32c5/clk.c
+++ b/components/esp_system/port/soc/esp32c5/clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2022-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -167,13 +167,12 @@ static void select_rtc_slow_clk(soc_rtc_slow_clk_src_t rtc_slow_clk_src)
             }
         }
         rtc_clk_slow_src_set(rtc_slow_clk_src);
-
         // Disable unused clock sources after clock source switching is complete.
         // Regardless of the clock source selection, the internal 136K clock source will always keep on.
-        if (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K && rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_OSC_SLOW) {
+        if ((rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K) && (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_OSC_SLOW)) {
             rtc_clk_32k_enable(false);
+            rtc_clk_32k_disable_external();
         }
-
         if (SLOW_CLK_CAL_CYCLES > 0) {
             /* TODO: 32k XTAL oscillator has some frequency drift at startup.
              * Improve calibration routine to wait until the frequency is stable.
diff --git a/components/esp_system/port/soc/esp32c6/clk.c b/components/esp_system/port/soc/esp32c6/clk.c
index ca2b940060..e893c6d3e5 100644
--- a/components/esp_system/port/soc/esp32c6/clk.c
+++ b/components/esp_system/port/soc/esp32c6/clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2022-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -185,11 +185,11 @@ static void select_rtc_slow_clk(soc_rtc_slow_clk_src_t rtc_slow_clk_src)
             rtc_clk_rc32k_enable(true);
         }
         rtc_clk_slow_src_set(rtc_slow_clk_src);
-
         // Disable unused clock sources after clock source switching is complete.
         // Regardless of the clock source selection, the internal 136K clock source will always keep on.
-        if (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K && rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_OSC_SLOW) {
+        if ((rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K) && (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_OSC_SLOW)) {
             rtc_clk_32k_enable(false);
+            rtc_clk_32k_disable_external();
         }
         if (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_RC32K) {
             rtc_clk_rc32k_enable(false);
diff --git a/components/esp_system/port/soc/esp32c61/clk.c b/components/esp_system/port/soc/esp32c61/clk.c
index d214167a55..0e51476772 100644
--- a/components/esp_system/port/soc/esp32c61/clk.c
+++ b/components/esp_system/port/soc/esp32c61/clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2024-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -148,13 +148,12 @@ static void select_rtc_slow_clk(soc_rtc_slow_clk_src_t rtc_slow_clk_src)
             }
         }
         rtc_clk_slow_src_set(rtc_slow_clk_src);
-
         // Disable unused clock sources after clock source switching is complete.
         // Regardless of the clock source selection, the internal 136K clock source will always keep on.
-        if (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K && rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_OSC_SLOW) {
+        if ((rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K) && (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_OSC_SLOW)) {
             rtc_clk_32k_enable(false);
+            rtc_clk_32k_disable_external();
         }
-
         if (SLOW_CLK_CAL_CYCLES > 0) {
             /* TODO: 32k XTAL oscillator has some frequency drift at startup.
              * Improve calibration routine to wait until the frequency is stable.
diff --git a/components/esp_system/port/soc/esp32h2/clk.c b/components/esp_system/port/soc/esp32h2/clk.c
index e1637a0dc2..7a4a902ec7 100644
--- a/components/esp_system/port/soc/esp32h2/clk.c
+++ b/components/esp_system/port/soc/esp32h2/clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2022-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2022-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -183,11 +183,11 @@ static void select_rtc_slow_clk(soc_rtc_slow_clk_src_t rtc_slow_clk_src)
             rtc_clk_rc32k_enable(true);
         }
         rtc_clk_slow_src_set(rtc_slow_clk_src);
-
         // Disable unused clock sources after clock source switching is complete.
         // Regardless of the clock source selection, the internal 136K clock source will always keep on.
-        if (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K && rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_OSC_SLOW) {
+        if ((rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K) && (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_OSC_SLOW)) {
             rtc_clk_32k_enable(false);
+            rtc_clk_32k_disable_external();
         }
         if (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_RC32K) {
             rtc_clk_rc32k_enable(false);
diff --git a/components/esp_system/port/soc/esp32s2/clk.c b/components/esp_system/port/soc/esp32s2/clk.c
index 2b786b62f9..0335b56a22 100644
--- a/components/esp_system/port/soc/esp32s2/clk.c
+++ b/components/esp_system/port/soc/esp32s2/clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -179,7 +179,10 @@ static void select_rtc_slow_clk(slow_clk_sel_t slow_clk)
             rtc_clk_8m_enable(true, true);
         }
         rtc_clk_slow_src_set(rtc_slow_clk_src);
-
+        if (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K) {
+            rtc_clk_32k_enable(false);
+            rtc_clk_32k_disable_external();
+        }
         if (SLOW_CLK_CAL_CYCLES > 0) {
             /* TODO: 32k XTAL oscillator has some frequency drift at startup.
              * Improve calibration routine to wait until the frequency is stable.
diff --git a/components/esp_system/port/soc/esp32s3/clk.c b/components/esp_system/port/soc/esp32s3/clk.c
index fac148fb41..3c3fd96ff0 100644
--- a/components/esp_system/port/soc/esp32s3/clk.c
+++ b/components/esp_system/port/soc/esp32s3/clk.c
@@ -1,5 +1,5 @@
 /*
- * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2015-2025 Espressif Systems (Shanghai) CO LTD
  *
  * SPDX-License-Identifier: Apache-2.0
  */
@@ -177,7 +177,10 @@ static void select_rtc_slow_clk(slow_clk_sel_t slow_clk)
             rtc_clk_8m_enable(true, true);
         }
         rtc_clk_slow_src_set(rtc_slow_clk_src);
-
+        if (rtc_slow_clk_src != SOC_RTC_SLOW_CLK_SRC_XTAL32K) {
+            rtc_clk_32k_enable(false);
+            rtc_clk_32k_disable_external();
+        }
         if (SLOW_CLK_CAL_CYCLES > 0) {
             /* TODO: 32k XTAL oscillator has some frequency drift at startup.
              * Improve calibration routine to wait until the frequency is stable.