From 69a7cfa9766e6b712fd7aa2f2a9e356423b19fe2 Mon Sep 17 00:00:00 2001 From: Jeroen Domburg Date: Wed, 11 Jan 2017 11:55:23 +0800 Subject: [PATCH] Also update documentation to new conventions --- docs/api/spi_master.rst | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/docs/api/spi_master.rst b/docs/api/spi_master.rst index 4d7693c07c..5b57d85f42 100644 --- a/docs/api/spi_master.rst +++ b/docs/api/spi_master.rst @@ -27,18 +27,18 @@ The spi_master driver uses the following terms: now, only HSPI or VSPI are actually supported in the driver; it will support all 3 peripherals somewhere in the future.) * Bus: The SPI bus, common to all SPI devices connected to one host. In general the bus consists of the - spid, spiq, spiclk and optionally spiwp and spihd signals. The SPI slaves are connected to these + miso, mosi, sclk and optionally quadwp and quadhd signals. The SPI slaves are connected to these signals in parallel. - - spiq - Also known as MISO, this is the input of the serial stream into the ESP32 + - miso - Also known as q, this is the input of the serial stream into the ESP32 - - spid - Also known as MOSI, this is the output of the serial stream from the ESP32 + - mosi - Also known as d, this is the output of the serial stream from the ESP32 - - spiclk - Clock signal. Each data bit is clocked out or in on the positive or negative edge of this signal + - sclk - Clock signal. Each data bit is clocked out or in on the positive or negative edge of this signal - - spiwp - Write Protect signal. Only used for 4-bit (qio/qout) transactions. + - quadwp - Write Protect signal. Only used for 4-bit (qio/qout) transactions. - - spihd - Hold signal. Only used for 4-bit (qio/qout) transactions. + - quadhd - Hold signal. Only used for 4-bit (qio/qout) transactions. * Device: A SPI slave. Each SPI slave has its own chip select (CS) line, which is made active when a transmission to/from the SPI slave occurs.