spi_flash: Making XMC flash works more stable when brownout detected

This commit is contained in:
Cao Sen Miao
2022-05-30 16:49:19 +08:00
parent 890f046ee9
commit 6a2d3509dc
27 changed files with 261 additions and 134 deletions

View File

@@ -1,16 +1,8 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
/*
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <stdlib.h>
#include <string.h>
@@ -20,6 +12,7 @@
#include "hal/spi_flash_encrypt_hal.h"
#include "esp_log.h"
#include "esp_attr.h"
#include "esp_private/spi_flash_os.h"
typedef struct flash_chip_dummy {
uint8_t dio_dummy_bitlen;
@@ -69,6 +62,12 @@ const DRAM_ATTR flash_chip_op_timeout_t spi_flash_chip_generic_timeout = {
.page_program_timeout = SPI_FLASH_GENERIC_PAGE_PROGRAM_TIMEOUT_MS * 1000,
};
#define SET_FLASH_ERASE_STATUS(CHIP, status) do { \
if (CHIP->os_func->set_flash_op_status) { \
CHIP->os_func->set_flash_op_status(status); \
} \
} while(0)
static const char TAG[] = "chip_generic";
#ifndef CONFIG_SPI_FLASH_ROM_IMPL
@@ -130,6 +129,7 @@ esp_err_t spi_flash_chip_generic_erase_chip(esp_flash_t *chip)
}
//The chip didn't accept the previous write command. Ignore this in preparation stage.
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
SET_FLASH_ERASE_STATUS(chip, SPI_FLASH_OS_IS_ERASING_STATUS_FLAG);
chip->host->driver->erase_chip(chip->host);
chip->busy = 1;
#ifdef CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED
@@ -137,6 +137,7 @@ esp_err_t spi_flash_chip_generic_erase_chip(esp_flash_t *chip)
#else
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->chip_erase_timeout);
#endif
SET_FLASH_ERASE_STATUS(chip, 0);
}
// Ensure WEL is 0, even if the erase failed.
if (err == ESP_ERR_NOT_SUPPORTED) {
@@ -154,6 +155,7 @@ esp_err_t spi_flash_chip_generic_erase_sector(esp_flash_t *chip, uint32_t start_
}
//The chip didn't accept the previous write command. Ignore this in preparationstage.
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
SET_FLASH_ERASE_STATUS(chip, SPI_FLASH_OS_IS_ERASING_STATUS_FLAG);
chip->host->driver->erase_sector(chip->host, start_address);
chip->busy = 1;
#ifdef CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED
@@ -161,6 +163,7 @@ esp_err_t spi_flash_chip_generic_erase_sector(esp_flash_t *chip, uint32_t start_
#else
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->sector_erase_timeout);
#endif
SET_FLASH_ERASE_STATUS(chip, 0);
}
// Ensure WEL is 0, even if the erase failed.
if (err == ESP_ERR_NOT_SUPPORTED) {
@@ -178,6 +181,7 @@ esp_err_t spi_flash_chip_generic_erase_block(esp_flash_t *chip, uint32_t start_a
}
//The chip didn't accept the previous write command. Ignore this in preparationstage.
if (err == ESP_OK || err == ESP_ERR_NOT_SUPPORTED) {
SET_FLASH_ERASE_STATUS(chip, SPI_FLASH_OS_IS_ERASING_STATUS_FLAG);
chip->host->driver->erase_block(chip->host, start_address);
chip->busy = 1;
#ifdef CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED
@@ -185,6 +189,7 @@ esp_err_t spi_flash_chip_generic_erase_block(esp_flash_t *chip, uint32_t start_a
#else
err = chip->chip_drv->wait_idle(chip, chip->chip_drv->timeout->block_erase_timeout);
#endif
SET_FLASH_ERASE_STATUS(chip, 0);
}
// Ensure WEL is 0, even if the erase failed.
if (err == ESP_ERR_NOT_SUPPORTED) {