From 6ba7a20e9f36afdea5b349548f546350a9ccf33a Mon Sep 17 00:00:00 2001 From: Linda Date: Tue, 6 Aug 2024 10:48:06 +0800 Subject: [PATCH] docs: add esp_wifi_types_generic.h to esp_wifi.rst --- .../esp_wifi/include/esp_wifi_types_generic.h | 691 +++++++++--------- docs/zh_CN/api-reference/network/esp_wifi.rst | 1 + 2 files changed, 349 insertions(+), 343 deletions(-) diff --git a/components/esp_wifi/include/esp_wifi_types_generic.h b/components/esp_wifi/include/esp_wifi_types_generic.h index 49ed036699..6196aeecf0 100644 --- a/components/esp_wifi/include/esp_wifi_types_generic.h +++ b/components/esp_wifi/include/esp_wifi_types_generic.h @@ -18,37 +18,37 @@ extern "C" { #endif /** - * @brief WiFi mode type + * @brief Wi-Fi mode type */ typedef enum { - WIFI_MODE_NULL = 0, /**< null mode */ - WIFI_MODE_STA, /**< WiFi station mode */ - WIFI_MODE_AP, /**< WiFi soft-AP mode */ - WIFI_MODE_APSTA, /**< WiFi station + soft-AP mode */ - WIFI_MODE_NAN, /**< WiFi NAN mode */ + WIFI_MODE_NULL = 0, /**< Null mode */ + WIFI_MODE_STA, /**< Wi-Fi station mode */ + WIFI_MODE_AP, /**< Wi-Fi soft-AP mode */ + WIFI_MODE_APSTA, /**< Wi-Fi station + soft-AP mode */ + WIFI_MODE_NAN, /**< Wi-Fi NAN mode */ WIFI_MODE_MAX } wifi_mode_t; /** - * @brief WiFi interface type + * @brief Wi-Fi interface type */ typedef enum { - WIFI_IF_STA = ESP_IF_WIFI_STA, - WIFI_IF_AP = ESP_IF_WIFI_AP, + WIFI_IF_STA = ESP_IF_WIFI_STA, /**< Station interface */ + WIFI_IF_AP = ESP_IF_WIFI_AP, /**< Soft-AP interface */ #if CONFIG_SOC_WIFI_NAN_SUPPORT || !CONFIG_SOC_WIFI_ENABLED - WIFI_IF_NAN = ESP_IF_WIFI_NAN, + WIFI_IF_NAN = ESP_IF_WIFI_NAN, /**< NAN interface */ #endif - WIFI_IF_MAX + WIFI_IF_MAX /**< Maximum number of interfaces */ } wifi_interface_t; -#define WIFI_OFFCHAN_TX_REQ 1 -#define WIFI_OFFCHAN_TX_CANCEL 0 +#define WIFI_OFFCHAN_TX_REQ 1 /**< Request off-channel transmission */ +#define WIFI_OFFCHAN_TX_CANCEL 0 /**< Cancel off-channel transmission */ -#define WIFI_ROC_REQ 1 -#define WIFI_ROC_CANCEL 0 +#define WIFI_ROC_REQ 1 /**< Request remain on channel */ +#define WIFI_ROC_CANCEL 0 /**< Cancel remain on channel */ /** - * @brief WiFi country policy + * @brief Wi-Fi country policy */ typedef enum { WIFI_COUNTRY_POLICY_AUTO, /**< Country policy is auto, use the country info of AP to which the station is connected */ @@ -56,121 +56,123 @@ typedef enum { } wifi_country_policy_t; /** - * @brief Structure describing WiFi country-based regional restrictions. + * @brief Structure describing Wi-Fi country-based regional restrictions. */ typedef struct { - char cc[3]; /**< country code string */ - uint8_t schan; /**< start channel */ - uint8_t nchan; /**< total channel number */ - int8_t max_tx_power; /**< This field is used for getting WiFi maximum transmitting power, call esp_wifi_set_max_tx_power to set the maximum transmitting power. */ - wifi_country_policy_t policy; /**< country policy */ + char cc[3]; /**< Country code string */ + uint8_t schan; /**< Start channel of the allowed 2.4GHz Wi-Fi channels */ + uint8_t nchan; /**< Total channel number of the allowed 2.4GHz Wi-Fi channels */ + int8_t max_tx_power; /**< This field is used for getting Wi-Fi maximum transmitting power, call esp_wifi_set_max_tx_power to set the maximum transmitting power. */ + wifi_country_policy_t policy; /**< Country policy */ } wifi_country_t; /** - * @brief WiFi authmode type + * @brief Wi-Fi authmode type * Strength of authmodes * Personal Networks : OPEN < WEP < WPA_PSK < OWE < WPA2_PSK = WPA_WPA2_PSK < WAPI_PSK < WPA3_PSK = WPA2_WPA3_PSK = DPP * Enterprise Networks : WIFI_AUTH_WPA2_ENTERPRISE < WIFI_AUTH_WPA3_ENTERPRISE = WIFI_AUTH_WPA2_WPA3_ENTERPRISE < WIFI_AUTH_WPA3_ENT_192 */ typedef enum { - WIFI_AUTH_OPEN = 0, /**< authenticate mode : open */ - WIFI_AUTH_WEP, /**< authenticate mode : WEP */ - WIFI_AUTH_WPA_PSK, /**< authenticate mode : WPA_PSK */ - WIFI_AUTH_WPA2_PSK, /**< authenticate mode : WPA2_PSK */ - WIFI_AUTH_WPA_WPA2_PSK, /**< authenticate mode : WPA_WPA2_PSK */ - WIFI_AUTH_ENTERPRISE, /**< authenticate mode : WiFi EAP security */ - WIFI_AUTH_WPA2_ENTERPRISE = WIFI_AUTH_ENTERPRISE, /**< authenticate mode : WiFi EAP security */ - WIFI_AUTH_WPA3_PSK, /**< authenticate mode : WPA3_PSK */ - WIFI_AUTH_WPA2_WPA3_PSK, /**< authenticate mode : WPA2_WPA3_PSK */ - WIFI_AUTH_WAPI_PSK, /**< authenticate mode : WAPI_PSK */ - WIFI_AUTH_OWE, /**< authenticate mode : OWE */ - WIFI_AUTH_WPA3_ENT_192, /**< authenticate mode : WPA3_ENT_SUITE_B_192_BIT */ - WIFI_AUTH_WPA3_EXT_PSK, /**< this authentication mode will yield same result as WIFI_AUTH_WPA3_PSK and not recommended to be used. It will be deprecated in future, please use WIFI_AUTH_WPA3_PSK instead. */ - WIFI_AUTH_WPA3_EXT_PSK_MIXED_MODE, /**< this authentication mode will yield same result as WIFI_AUTH_WPA3_PSK and not recommended to be used. It will be deprecated in future, please use WIFI_AUTH_WPA3_PSK instead.*/ - WIFI_AUTH_DPP, /**< authenticate mode : DPP */ + WIFI_AUTH_OPEN = 0, /**< Authenticate mode : open */ + WIFI_AUTH_WEP, /**< Authenticate mode : WEP */ + WIFI_AUTH_WPA_PSK, /**< Authenticate mode : WPA_PSK */ + WIFI_AUTH_WPA2_PSK, /**< Authenticate mode : WPA2_PSK */ + WIFI_AUTH_WPA_WPA2_PSK, /**< Authenticate mode : WPA_WPA2_PSK */ + WIFI_AUTH_ENTERPRISE, /**< Authenticate mode : Wi-Fi EAP security */ + WIFI_AUTH_WPA2_ENTERPRISE = WIFI_AUTH_ENTERPRISE, /**< Authenticate mode : Wi-Fi EAP security */ + WIFI_AUTH_WPA3_PSK, /**< Authenticate mode : WPA3_PSK */ + WIFI_AUTH_WPA2_WPA3_PSK, /**< Authenticate mode : WPA2_WPA3_PSK */ + WIFI_AUTH_WAPI_PSK, /**< Authenticate mode : WAPI_PSK */ + WIFI_AUTH_OWE, /**< Authenticate mode : OWE */ + WIFI_AUTH_WPA3_ENT_192, /**< Authenticate mode : WPA3_ENT_SUITE_B_192_BIT */ + WIFI_AUTH_WPA3_EXT_PSK, /**< This authentication mode will yield same result as WIFI_AUTH_WPA3_PSK and not recommended to be used. It will be deprecated in future, please use WIFI_AUTH_WPA3_PSK instead. */ + WIFI_AUTH_WPA3_EXT_PSK_MIXED_MODE, /**< This authentication mode will yield same result as WIFI_AUTH_WPA3_PSK and not recommended to be used. It will be deprecated in future, please use WIFI_AUTH_WPA3_PSK instead.*/ + WIFI_AUTH_DPP, /**< Authenticate mode : DPP */ WIFI_AUTH_MAX } wifi_auth_mode_t; /** - * @brief WiFi error reason + * @brief Wi-Fi disconnection reason codes + * + * These reason codes are used to indicate the cause of disconnection. */ typedef enum { - WIFI_REASON_UNSPECIFIED = 1, - WIFI_REASON_AUTH_EXPIRE = 2, - WIFI_REASON_AUTH_LEAVE = 3, - WIFI_REASON_ASSOC_EXPIRE = 4, - WIFI_REASON_ASSOC_TOOMANY = 5, - WIFI_REASON_NOT_AUTHED = 6, - WIFI_REASON_NOT_ASSOCED = 7, - WIFI_REASON_ASSOC_LEAVE = 8, - WIFI_REASON_ASSOC_NOT_AUTHED = 9, - WIFI_REASON_DISASSOC_PWRCAP_BAD = 10, - WIFI_REASON_DISASSOC_SUPCHAN_BAD = 11, - WIFI_REASON_BSS_TRANSITION_DISASSOC = 12, - WIFI_REASON_IE_INVALID = 13, - WIFI_REASON_MIC_FAILURE = 14, - WIFI_REASON_4WAY_HANDSHAKE_TIMEOUT = 15, - WIFI_REASON_GROUP_KEY_UPDATE_TIMEOUT = 16, - WIFI_REASON_IE_IN_4WAY_DIFFERS = 17, - WIFI_REASON_GROUP_CIPHER_INVALID = 18, - WIFI_REASON_PAIRWISE_CIPHER_INVALID = 19, - WIFI_REASON_AKMP_INVALID = 20, - WIFI_REASON_UNSUPP_RSN_IE_VERSION = 21, - WIFI_REASON_INVALID_RSN_IE_CAP = 22, - WIFI_REASON_802_1X_AUTH_FAILED = 23, - WIFI_REASON_CIPHER_SUITE_REJECTED = 24, - WIFI_REASON_TDLS_PEER_UNREACHABLE = 25, - WIFI_REASON_TDLS_UNSPECIFIED = 26, - WIFI_REASON_SSP_REQUESTED_DISASSOC = 27, - WIFI_REASON_NO_SSP_ROAMING_AGREEMENT = 28, - WIFI_REASON_BAD_CIPHER_OR_AKM = 29, - WIFI_REASON_NOT_AUTHORIZED_THIS_LOCATION = 30, - WIFI_REASON_SERVICE_CHANGE_PERCLUDES_TS = 31, - WIFI_REASON_UNSPECIFIED_QOS = 32, - WIFI_REASON_NOT_ENOUGH_BANDWIDTH = 33, - WIFI_REASON_MISSING_ACKS = 34, - WIFI_REASON_EXCEEDED_TXOP = 35, - WIFI_REASON_STA_LEAVING = 36, - WIFI_REASON_END_BA = 37, - WIFI_REASON_UNKNOWN_BA = 38, - WIFI_REASON_TIMEOUT = 39, - WIFI_REASON_PEER_INITIATED = 46, - WIFI_REASON_AP_INITIATED = 47, - WIFI_REASON_INVALID_FT_ACTION_FRAME_COUNT = 48, - WIFI_REASON_INVALID_PMKID = 49, - WIFI_REASON_INVALID_MDE = 50, - WIFI_REASON_INVALID_FTE = 51, - WIFI_REASON_TRANSMISSION_LINK_ESTABLISH_FAILED = 67, - WIFI_REASON_ALTERATIVE_CHANNEL_OCCUPIED = 68, + WIFI_REASON_UNSPECIFIED = 1, /**< Unspecified reason */ + WIFI_REASON_AUTH_EXPIRE = 2, /**< Authentication expired */ + WIFI_REASON_AUTH_LEAVE = 3, /**< Deauthentication due to leaving */ + WIFI_REASON_ASSOC_EXPIRE = 4, /**< Association expired */ + WIFI_REASON_ASSOC_TOOMANY = 5, /**< Too many associated stations */ + WIFI_REASON_NOT_AUTHED = 6, /**< Not authenticated */ + WIFI_REASON_NOT_ASSOCED = 7, /**< Not associated */ + WIFI_REASON_ASSOC_LEAVE = 8, /**< Deassociated due to leaving */ + WIFI_REASON_ASSOC_NOT_AUTHED = 9, /**< Association but not authenticated */ + WIFI_REASON_DISASSOC_PWRCAP_BAD = 10, /**< Disassociated due to poor power capability */ + WIFI_REASON_DISASSOC_SUPCHAN_BAD = 11, /**< Disassociated due to unsupported channel */ + WIFI_REASON_BSS_TRANSITION_DISASSOC = 12, /**< Disassociated due to BSS transition */ + WIFI_REASON_IE_INVALID = 13, /**< Invalid Information Element (IE) */ + WIFI_REASON_MIC_FAILURE = 14, /**< MIC failure */ + WIFI_REASON_4WAY_HANDSHAKE_TIMEOUT = 15, /**< 4-way handshake timeout */ + WIFI_REASON_GROUP_KEY_UPDATE_TIMEOUT = 16, /**< Group key update timeout */ + WIFI_REASON_IE_IN_4WAY_DIFFERS = 17, /**< IE differs in 4-way handshake */ + WIFI_REASON_GROUP_CIPHER_INVALID = 18, /**< Invalid group cipher */ + WIFI_REASON_PAIRWISE_CIPHER_INVALID = 19, /**< Invalid pairwise cipher */ + WIFI_REASON_AKMP_INVALID = 20, /**< Invalid AKMP */ + WIFI_REASON_UNSUPP_RSN_IE_VERSION = 21, /**< Unsupported RSN IE version */ + WIFI_REASON_INVALID_RSN_IE_CAP = 22, /**< Invalid RSN IE capabilities */ + WIFI_REASON_802_1X_AUTH_FAILED = 23, /**< 802.1X authentication failed */ + WIFI_REASON_CIPHER_SUITE_REJECTED = 24, /**< Cipher suite rejected */ + WIFI_REASON_TDLS_PEER_UNREACHABLE = 25, /**< TDLS peer unreachable */ + WIFI_REASON_TDLS_UNSPECIFIED = 26, /**< TDLS unspecified */ + WIFI_REASON_SSP_REQUESTED_DISASSOC = 27, /**< SSP requested disassociation */ + WIFI_REASON_NO_SSP_ROAMING_AGREEMENT = 28, /**< No SSP roaming agreement */ + WIFI_REASON_BAD_CIPHER_OR_AKM = 29, /**< Bad cipher or AKM */ + WIFI_REASON_NOT_AUTHORIZED_THIS_LOCATION = 30, /**< Not authorized in this location */ + WIFI_REASON_SERVICE_CHANGE_PERCLUDES_TS = 31, /**< Service change precludes TS */ + WIFI_REASON_UNSPECIFIED_QOS = 32, /**< Unspecified QoS reason */ + WIFI_REASON_NOT_ENOUGH_BANDWIDTH = 33, /**< Not enough bandwidth */ + WIFI_REASON_MISSING_ACKS = 34, /**< Missing ACKs */ + WIFI_REASON_EXCEEDED_TXOP = 35, /**< Exceeded TXOP */ + WIFI_REASON_STA_LEAVING = 36, /**< Station leaving */ + WIFI_REASON_END_BA = 37, /**< End of Block Ack (BA) */ + WIFI_REASON_UNKNOWN_BA = 38, /**< Unknown Block Ack (BA) */ + WIFI_REASON_TIMEOUT = 39, /**< Timeout */ + WIFI_REASON_PEER_INITIATED = 46, /**< Peer initiated disassociation */ + WIFI_REASON_AP_INITIATED = 47, /**< AP initiated disassociation */ + WIFI_REASON_INVALID_FT_ACTION_FRAME_COUNT = 48, /**< Invalid FT action frame count */ + WIFI_REASON_INVALID_PMKID = 49, /**< Invalid PMKID */ + WIFI_REASON_INVALID_MDE = 50, /**< Invalid MDE */ + WIFI_REASON_INVALID_FTE = 51, /**< Invalid FTE */ + WIFI_REASON_TRANSMISSION_LINK_ESTABLISH_FAILED = 67, /**< Transmission link establishment failed */ + WIFI_REASON_ALTERATIVE_CHANNEL_OCCUPIED = 68, /**< Alternative channel occupied */ - WIFI_REASON_BEACON_TIMEOUT = 200, - WIFI_REASON_NO_AP_FOUND = 201, - WIFI_REASON_AUTH_FAIL = 202, - WIFI_REASON_ASSOC_FAIL = 203, - WIFI_REASON_HANDSHAKE_TIMEOUT = 204, - WIFI_REASON_CONNECTION_FAIL = 205, - WIFI_REASON_AP_TSF_RESET = 206, - WIFI_REASON_ROAMING = 207, - WIFI_REASON_ASSOC_COMEBACK_TIME_TOO_LONG = 208, - WIFI_REASON_SA_QUERY_TIMEOUT = 209, - WIFI_REASON_NO_AP_FOUND_W_COMPATIBLE_SECURITY = 210, - WIFI_REASON_NO_AP_FOUND_IN_AUTHMODE_THRESHOLD = 211, - WIFI_REASON_NO_AP_FOUND_IN_RSSI_THRESHOLD = 212, + WIFI_REASON_BEACON_TIMEOUT = 200, /**< Beacon timeout */ + WIFI_REASON_NO_AP_FOUND = 201, /**< No AP found */ + WIFI_REASON_AUTH_FAIL = 202, /**< Authentication failed */ + WIFI_REASON_ASSOC_FAIL = 203, /**< Association failed */ + WIFI_REASON_HANDSHAKE_TIMEOUT = 204, /**< Handshake timeout */ + WIFI_REASON_CONNECTION_FAIL = 205, /**< Connection failed */ + WIFI_REASON_AP_TSF_RESET = 206, /**< AP TSF reset */ + WIFI_REASON_ROAMING = 207, /**< Roaming */ + WIFI_REASON_ASSOC_COMEBACK_TIME_TOO_LONG = 208, /**< Association comeback time too long */ + WIFI_REASON_SA_QUERY_TIMEOUT = 209, /**< SA query timeout */ + WIFI_REASON_NO_AP_FOUND_W_COMPATIBLE_SECURITY = 210, /**< No AP found with compatible security */ + WIFI_REASON_NO_AP_FOUND_IN_AUTHMODE_THRESHOLD = 211, /**< No AP found in auth mode threshold */ + WIFI_REASON_NO_AP_FOUND_IN_RSSI_THRESHOLD = 212, /**< No AP found in RSSI threshold */ } wifi_err_reason_t; /** - * @brief WiFi second channel type + * @brief Wi-Fi second channel type */ typedef enum { - WIFI_SECOND_CHAN_NONE = 0, /**< the channel width is HT20 */ - WIFI_SECOND_CHAN_ABOVE, /**< the channel width is HT40 and the secondary channel is above the primary channel */ - WIFI_SECOND_CHAN_BELOW, /**< the channel width is HT40 and the secondary channel is below the primary channel */ + WIFI_SECOND_CHAN_NONE = 0, /**< The channel width is HT20 */ + WIFI_SECOND_CHAN_ABOVE, /**< The channel width is HT40 and the secondary channel is above the primary channel */ + WIFI_SECOND_CHAN_BELOW, /**< The channel width is HT40 and the secondary channel is below the primary channel */ } wifi_second_chan_t; -#define WIFI_ACTIVE_SCAN_MIN_DEFAULT_TIME 0 -#define WIFI_ACTIVE_SCAN_MAX_DEFAULT_TIME 120 -#define WIFI_PASSIVE_SCAN_DEFAULT_TIME 360 -#define WIFI_SCAN_HOME_CHANNEL_DWELL_DEFAULT_TIME 30 +#define WIFI_ACTIVE_SCAN_MIN_DEFAULT_TIME 0 /**< Default minimum active scan time per channel */ +#define WIFI_ACTIVE_SCAN_MAX_DEFAULT_TIME 120 /**< Default maximum active scan time per channel */ +#define WIFI_PASSIVE_SCAN_DEFAULT_TIME 360 /**< Default passive scan time per channel */ +#define WIFI_SCAN_HOME_CHANNEL_DWELL_DEFAULT_TIME 30 /**< Default time spent at home channel between scanning consecutive channels */ #define WIFI_SCAN_PARAMS_DEFAULT_CONFIG() { \ .scan_time.active.min = WIFI_ACTIVE_SCAN_MIN_DEFAULT_TIME, \ @@ -180,33 +182,33 @@ typedef enum { } /** - * @brief WiFi scan type + * @brief Wi-Fi scan type */ typedef enum { - WIFI_SCAN_TYPE_ACTIVE = 0, /**< active scan */ - WIFI_SCAN_TYPE_PASSIVE, /**< passive scan */ + WIFI_SCAN_TYPE_ACTIVE = 0, /**< Active scan */ + WIFI_SCAN_TYPE_PASSIVE, /**< Passive scan */ } wifi_scan_type_t; /** * @brief Range of active scan times per channel */ typedef struct { - uint32_t min; /**< minimum active scan time per channel, units: millisecond */ - uint32_t max; /**< maximum active scan time per channel, units: millisecond, values above 1500ms may - cause station to disconnect from AP and are not recommended. */ + uint32_t min; /**< Minimum active scan time per channel, units: millisecond */ + uint32_t max; /**< Maximum active scan time per channel, units: millisecond, values above 1500 ms may + cause station to disconnect from AP and are not recommended. */ } wifi_active_scan_time_t; /** * @brief Aggregate of active & passive scan time per channel */ typedef struct { - wifi_active_scan_time_t active; /**< active scan time per channel, units: millisecond. */ - uint32_t passive; /**< passive scan time per channel, units: millisecond, values above 1500ms may + wifi_active_scan_time_t active; /**< Active scan time per channel, units: millisecond. */ + uint32_t passive; /**< Passive scan time per channel, units: millisecond, values above 1500 ms may cause station to disconnect from AP and are not recommended. */ } wifi_scan_time_t; /** - * @brief Bitmap for scan channel + * @brief Channel bitmap for setting specific channels to be scanned */ typedef struct { uint16_t ghz_2_channels; /**< Represents 2.4 GHz channels */ @@ -219,11 +221,11 @@ typedef struct { typedef struct { uint8_t *ssid; /**< SSID of AP */ uint8_t *bssid; /**< MAC address of AP */ - uint8_t channel; /**< channel, scan the specific channel */ - bool show_hidden; /**< enable to scan AP whose SSID is hidden */ - wifi_scan_type_t scan_type; /**< scan type, active or passive */ - wifi_scan_time_t scan_time; /**< scan time per channel */ - uint8_t home_chan_dwell_time; /**< time spent at home channel between scanning consecutive channels. */ + uint8_t channel; /**< Channel, scan the specific channel */ + bool show_hidden; /**< Enable it to scan AP whose SSID is hidden */ + wifi_scan_type_t scan_type; /**< Scan type, active or passive */ + wifi_scan_time_t scan_time; /**< Scan time per channel */ + uint8_t home_chan_dwell_time; /**< Time spent at home channel between scanning consecutive channels. */ wifi_scan_channel_bitmap_t channel_bitmap; /**< Channel bitmap for setting specific channels to be scanned. For 2.4ghz channels set ghz_2_channels from BIT(1) to BIT(14) from LSB to MSB order to indicate channels to be scanned. Currently scanning in 5ghz channels is not supported. Please note that the 'channel' parameter above needs to be set to 0 to allow scanning by bitmap. */ } wifi_scan_config_t; @@ -231,86 +233,86 @@ typedef struct { * @brief Parameters default scan configurations */ typedef struct { - wifi_scan_time_t scan_time; /**< scan time per channel */ - uint8_t home_chan_dwell_time;/**< time spent at home channel between scanning consecutive channels.*/ + wifi_scan_time_t scan_time; /**< Scan time per channel */ + uint8_t home_chan_dwell_time;/**< Time spent at home channel between scanning consecutive channels.*/ } wifi_scan_default_params_t; /** - * @brief WiFi cipher type + * @brief Wi-Fi cipher type */ typedef enum { - WIFI_CIPHER_TYPE_NONE = 0, /**< the cipher type is none */ - WIFI_CIPHER_TYPE_WEP40, /**< the cipher type is WEP40 */ - WIFI_CIPHER_TYPE_WEP104, /**< the cipher type is WEP104 */ - WIFI_CIPHER_TYPE_TKIP, /**< the cipher type is TKIP */ - WIFI_CIPHER_TYPE_CCMP, /**< the cipher type is CCMP */ - WIFI_CIPHER_TYPE_TKIP_CCMP, /**< the cipher type is TKIP and CCMP */ - WIFI_CIPHER_TYPE_AES_CMAC128,/**< the cipher type is AES-CMAC-128 */ - WIFI_CIPHER_TYPE_SMS4, /**< the cipher type is SMS4 */ - WIFI_CIPHER_TYPE_GCMP, /**< the cipher type is GCMP */ - WIFI_CIPHER_TYPE_GCMP256, /**< the cipher type is GCMP-256 */ - WIFI_CIPHER_TYPE_AES_GMAC128,/**< the cipher type is AES-GMAC-128 */ - WIFI_CIPHER_TYPE_AES_GMAC256,/**< the cipher type is AES-GMAC-256 */ - WIFI_CIPHER_TYPE_UNKNOWN, /**< the cipher type is unknown */ + WIFI_CIPHER_TYPE_NONE = 0, /**< The cipher type is none */ + WIFI_CIPHER_TYPE_WEP40, /**< The cipher type is WEP40 */ + WIFI_CIPHER_TYPE_WEP104, /**< The cipher type is WEP104 */ + WIFI_CIPHER_TYPE_TKIP, /**< The cipher type is TKIP */ + WIFI_CIPHER_TYPE_CCMP, /**< The cipher type is CCMP */ + WIFI_CIPHER_TYPE_TKIP_CCMP, /**< The cipher type is TKIP and CCMP */ + WIFI_CIPHER_TYPE_AES_CMAC128,/**< The cipher type is AES-CMAC-128 */ + WIFI_CIPHER_TYPE_SMS4, /**< The cipher type is SMS4 */ + WIFI_CIPHER_TYPE_GCMP, /**< The cipher type is GCMP */ + WIFI_CIPHER_TYPE_GCMP256, /**< The cipher type is GCMP-256 */ + WIFI_CIPHER_TYPE_AES_GMAC128,/**< The cipher type is AES-GMAC-128 */ + WIFI_CIPHER_TYPE_AES_GMAC256,/**< The cipher type is AES-GMAC-256 */ + WIFI_CIPHER_TYPE_UNKNOWN, /**< The cipher type is unknown */ } wifi_cipher_type_t; /** - * @brief WiFi antenna + * @brief Wi-Fi antenna */ typedef enum { - WIFI_ANT_ANT0, /**< WiFi antenna 0 */ - WIFI_ANT_ANT1, /**< WiFi antenna 1 */ - WIFI_ANT_MAX, /**< Invalid WiFi antenna */ + WIFI_ANT_ANT0, /**< Wi-Fi antenna 0 */ + WIFI_ANT_ANT1, /**< Wi-Fi antenna 1 */ + WIFI_ANT_MAX, /**< Invalid Wi-Fi antenna */ } wifi_ant_t; /** - * @brief Description of a WiFi AP HE Info + * @brief Description of a Wi-Fi AP HE Info */ typedef struct { - uint8_t bss_color: 6; /**< an unsigned integer whose value is the BSS Color of the BSS corresponding to the AP */ - uint8_t partial_bss_color: 1; /**< indicate if an AID assignment rule based on the BSS color */ - uint8_t bss_color_disabled: 1; /**< indicate if the use of BSS color is disabled */ - uint8_t bssid_index; /**< in M-BSSID set, identifies the nontransmitted BSSID */ + uint8_t bss_color: 6; /**< The BSS Color value associated with the AP's corresponding BSS */ + uint8_t partial_bss_color: 1; /**< Indicates whether an AID assignment rule is based on the BSS color */ + uint8_t bss_color_disabled: 1; /**< Indicates whether the BSS color usage is disabled */ + uint8_t bssid_index; /**< In a M-BSSID set, identifies the non-transmitted BSSID */ } wifi_he_ap_info_t; /** - * @brief Description of a WiFi AP + * @brief Description of a Wi-Fi AP */ typedef struct { uint8_t bssid[6]; /**< MAC address of AP */ uint8_t ssid[33]; /**< SSID of AP */ - uint8_t primary; /**< channel of AP */ - wifi_second_chan_t second; /**< secondary channel of AP */ - int8_t rssi; /**< signal strength of AP. Note that in some rare cases where signal strength is very strong, rssi values can be slightly positive */ - wifi_auth_mode_t authmode; /**< authmode of AP */ - wifi_cipher_type_t pairwise_cipher; /**< pairwise cipher of AP */ - wifi_cipher_type_t group_cipher; /**< group cipher of AP */ - wifi_ant_t ant; /**< antenna used to receive beacon from AP */ - uint32_t phy_11b: 1; /**< bit: 0 flag to identify if 11b mode is enabled or not */ - uint32_t phy_11g: 1; /**< bit: 1 flag to identify if 11g mode is enabled or not */ - uint32_t phy_11n: 1; /**< bit: 2 flag to identify if 11n mode is enabled or not */ - uint32_t phy_lr: 1; /**< bit: 3 flag to identify if low rate is enabled or not */ - uint32_t phy_11a: 1; /**< bit: 4 flag to identify if 11ax mode is enabled or not */ - uint32_t phy_11ac: 1; /**< bit: 5 flag to identify if 11ax mode is enabled or not */ - uint32_t phy_11ax: 1; /**< bit: 6 flag to identify if 11ax mode is enabled or not */ - uint32_t wps: 1; /**< bit: 7 flag to identify if WPS is supported or not */ - uint32_t ftm_responder: 1; /**< bit: 8 flag to identify if FTM is supported in responder mode */ - uint32_t ftm_initiator: 1; /**< bit: 9 flag to identify if FTM is supported in initiator mode */ - uint32_t reserved: 22; /**< bit: 10..31 reserved */ - wifi_country_t country; /**< country information of AP */ + uint8_t primary; /**< Channel of AP */ + wifi_second_chan_t second; /**< Secondary channel of AP */ + int8_t rssi; /**< Signal strength of AP. Note that in some rare cases where signal strength is very strong, RSSI values can be slightly positive */ + wifi_auth_mode_t authmode; /**< Auth mode of AP */ + wifi_cipher_type_t pairwise_cipher; /**< Pairwise cipher of AP */ + wifi_cipher_type_t group_cipher; /**< Group cipher of AP */ + wifi_ant_t ant; /**< Antenna used to receive beacon from AP */ + uint32_t phy_11b: 1; /**< Bit: 0 flag to identify if 11b mode is enabled or not */ + uint32_t phy_11g: 1; /**< Bit: 1 flag to identify if 11g mode is enabled or not */ + uint32_t phy_11n: 1; /**< Bit: 2 flag to identify if 11n mode is enabled or not */ + uint32_t phy_lr: 1; /**< Bit: 3 flag to identify if low rate is enabled or not */ + uint32_t phy_11a: 1; /**< Bit: 4 flag to identify if 11ax mode is enabled or not */ + uint32_t phy_11ac: 1; /**< Bit: 5 flag to identify if 11ax mode is enabled or not */ + uint32_t phy_11ax: 1; /**< Bit: 6 flag to identify if 11ax mode is enabled or not */ + uint32_t wps: 1; /**< Bit: 7 flag to identify if WPS is supported or not */ + uint32_t ftm_responder: 1; /**< Bit: 8 flag to identify if FTM is supported in responder mode */ + uint32_t ftm_initiator: 1; /**< Bit: 9 flag to identify if FTM is supported in initiator mode */ + uint32_t reserved: 22; /**< Bit: 10..31 reserved */ + wifi_country_t country; /**< Country information of AP */ wifi_he_ap_info_t he_ap; /**< HE AP info */ uint8_t bandwidth; /**< For AP 20 MHz this value is set to 1. For AP 40 MHz this value is set to 2. For AP 80 MHz this value is set to 3. For AP 160MHz this value is set to 4. For AP 80+80MHz this value is set to 5*/ - uint8_t vht_ch_freq1; /**< this fields are used only AP bandwidth is 80 and 160 MHz, to transmit the center channel - frequency of the BSS. For AP bandwidth is 80+80MHz, it is the center channel frequency + uint8_t vht_ch_freq1; /**< This fields are used only AP bandwidth is 80 and 160 MHz, to transmit the center channel + frequency of the BSS. For AP bandwidth is 80 + 80 MHz, it is the center channel frequency of the lower frequency segment.*/ - uint8_t vht_ch_freq2; /**< this fields are used only AP bandwidth is 80+80MHz, and is used to transmit the center + uint8_t vht_ch_freq2; /**< This fields are used only AP bandwidth is 80 + 80 MHz, and is used to transmit the center channel frequency of the second segment. */ } wifi_ap_record_t; /** - * @brief WiFi scan method + * @brief Wi-Fi scan method */ typedef enum { WIFI_FAST_SCAN = 0, /**< Do fast scan, scan will end after find SSID match AP */ @@ -318,7 +320,7 @@ typedef enum { } wifi_scan_method_t; /** - * @brief WiFi sort AP method + * @brief Wi-Fi sort AP method */ typedef enum { WIFI_CONNECT_AP_BY_SIGNAL = 0, /**< Sort match AP in scan list by RSSI */ @@ -326,16 +328,16 @@ typedef enum { } wifi_sort_method_t; /** - * @brief Structure describing parameters for a WiFi fast scan + * @brief Structure describing parameters for a Wi-Fi fast scan */ typedef struct { int8_t rssi; /**< The minimum rssi to accept in the fast scan mode */ - wifi_auth_mode_t authmode; /**< The weakest authmode to accept in the fast scan mode - Note: In case this value is not set and password is set as per WPA2 standards(password len >= 8), it will be defaulted to WPA2 and device won't connect to deprecated WEP/WPA networks. Please set authmode threshold as WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK to connect to WEP/WPA networks */ + wifi_auth_mode_t authmode; /**< The weakest auth mode to accept in the fast scan mode + Note: In case this value is not set and password is set as per WPA2 standards(password len >= 8), it will be defaulted to WPA2 and device won't connect to deprecated WEP/WPA networks. Please set auth mode threshold as WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK to connect to WEP/WPA networks */ } wifi_scan_threshold_t; /** - * @brief WiFi power save type + * @brief Wi-Fi power save type */ typedef enum { WIFI_PS_NONE, /**< No power save */ @@ -343,25 +345,25 @@ typedef enum { WIFI_PS_MAX_MODEM, /**< Maximum modem power saving. In this mode, interval to receive beacons is determined by the listen_interval parameter in wifi_sta_config_t */ } wifi_ps_type_t; -#define WIFI_PROTOCOL_11B 0x1 -#define WIFI_PROTOCOL_11G 0x2 -#define WIFI_PROTOCOL_11N 0x4 -#define WIFI_PROTOCOL_LR 0x8 -#define WIFI_PROTOCOL_11A 0x10 -#define WIFI_PROTOCOL_11AC 0x20 -#define WIFI_PROTOCOL_11AX 0x40 +#define WIFI_PROTOCOL_11B 0x1 /**< 802.11b protocol */ +#define WIFI_PROTOCOL_11G 0x2 /**< 802.11g protocol */ +#define WIFI_PROTOCOL_11N 0x4 /**< 802.11n protocol */ +#define WIFI_PROTOCOL_LR 0x8 /**< Low Rate protocol */ +#define WIFI_PROTOCOL_11A 0x10 /**< 802.11a protocol */ +#define WIFI_PROTOCOL_11AC 0x20 /**< 802.11ac protocol */ +#define WIFI_PROTOCOL_11AX 0x40 /**< 802.11ax protocol */ /** - * @brief WiFi bandwidth type + * @brief Wi-Fi bandwidth type */ typedef enum { - WIFI_BW_HT20 = 1, /* Bandwidth is HT20 */ - WIFI_BW20 = WIFI_BW_HT20, /* Bandwidth is 20 MHz */ - WIFI_BW_HT40 = 2, /* Bandwidth is HT40 */ - WIFI_BW40 = WIFI_BW_HT40, /* Bandwidth is 40 MHz */ - WIFI_BW80 = 3, /* Bandwidth is 80 MHz */ - WIFI_BW160 = 4, /* Bandwidth is 160 MHz */ - WIFI_BW80_BW80 = 5, /* Bandwidth is 80+80 MHz */ + WIFI_BW_HT20 = 1, /**< Bandwidth is HT20 */ + WIFI_BW20 = WIFI_BW_HT20, /**< Bandwidth is 20 MHz */ + WIFI_BW_HT40 = 2, /**< Bandwidth is HT40 */ + WIFI_BW40 = WIFI_BW_HT40, /**< Bandwidth is 40 MHz */ + WIFI_BW80 = 3, /**< Bandwidth is 80 MHz */ + WIFI_BW160 = 4, /**< Bandwidth is 160 MHz */ + WIFI_BW80_BW80 = 5, /**< Bandwidth is 80 + 80 MHz */ } wifi_bandwidth_t; /** @@ -411,7 +413,7 @@ typedef struct { wifi_sae_pwe_method_t sae_pwe_h2e; /**< Configuration for SAE PWE derivation method */ } wifi_ap_config_t; -#define SAE_H2E_IDENTIFIER_LEN 32 +#define SAE_H2E_IDENTIFIER_LEN 32 /**< Length of the password identifier for H2E */ /** * @brief STA configuration settings for the device @@ -419,12 +421,12 @@ typedef struct { typedef struct { uint8_t ssid[32]; /**< SSID of target AP. */ uint8_t password[64]; /**< Password of target AP. */ - wifi_scan_method_t scan_method; /**< do all channel scan or fast scan */ - bool bssid_set; /**< whether set MAC address of target AP or not. Generally, station_config.bssid_set needs to be 0; and it needs to be 1 only when users need to check the MAC address of the AP.*/ + wifi_scan_method_t scan_method; /**< Do all channel scan or fast scan */ + bool bssid_set; /**< Whether set MAC address of target AP or not. Generally, station_config.bssid_set needs to be 0; and it needs to be 1 only when users need to check the MAC address of the AP.*/ uint8_t bssid[6]; /**< MAC address of target AP*/ - uint8_t channel; /**< channel of target AP. Set to 1~13 to scan starting from the specified channel before connecting to AP. If the channel of AP is unknown, set it to 0.*/ + uint8_t channel; /**< Channel of target AP. Set to 1~13 to scan starting from the specified channel before connecting to AP. If the channel of AP is unknown, set it to 0.*/ uint16_t listen_interval; /**< Listen interval for ESP32 station to receive beacon when WIFI_PS_MAX_MODEM is set. Units: AP beacon intervals. Defaults to 3 if set to 0. */ - wifi_sort_method_t sort_method; /**< sort the connect AP in the list by rssi or security mode */ + wifi_sort_method_t sort_method; /**< Sort the connect AP in the list by rssi or security mode */ wifi_scan_threshold_t threshold; /**< When scan_threshold is set, only APs which have an auth mode that is more secure than the selected auth mode and a signal stronger than the minimum RSSI will be used. */ wifi_pmf_config_t pmf_cfg; /**< Configuration for Protected Management Frame. Will be advertised in RSN Capabilities in RSN IE. */ uint32_t rm_enabled: 1; /**< Whether Radio Measurements are enabled for the connection */ @@ -468,34 +470,34 @@ typedef struct { * */ typedef union { - wifi_ap_config_t ap; /**< configuration of AP */ - wifi_sta_config_t sta; /**< configuration of STA */ - wifi_nan_config_t nan; /**< configuration of NAN */ + wifi_ap_config_t ap; /**< Configuration of AP */ + wifi_sta_config_t sta; /**< Configuration of STA */ + wifi_nan_config_t nan; /**< Configuration of NAN */ } wifi_config_t; /** * @brief Description of STA associated with AP */ typedef struct { - uint8_t mac[6]; /**< mac address */ - int8_t rssi; /**< current average rssi of sta connected */ - uint32_t phy_11b: 1; /**< bit: 0 flag to identify if 11b mode is enabled or not */ - uint32_t phy_11g: 1; /**< bit: 1 flag to identify if 11g mode is enabled or not */ - uint32_t phy_11n: 1; /**< bit: 2 flag to identify if 11n mode is enabled or not */ - uint32_t phy_lr: 1; /**< bit: 3 flag to identify if low rate is enabled or not */ - uint32_t phy_11a: 1; /**< bit: 4 flag to identify if 11ax mode is enabled or not */ - uint32_t phy_11ac: 1; /**< bit: 5 flag to identify if 11ax mode is enabled or not */ - uint32_t phy_11ax: 1; /**< bit: 6 flag to identify if 11ax mode is enabled or not */ - uint32_t is_mesh_child: 1; /**< bit: 7 flag to identify mesh child */ - uint32_t reserved: 24; /**< bit: 8..31 reserved */ + uint8_t mac[6]; /**< MAC address */ + int8_t rssi; /**< Current average rssi of sta connected */ + uint32_t phy_11b: 1; /**< Bit: 0 flag to identify if 11b mode is enabled or not */ + uint32_t phy_11g: 1; /**< Bit: 1 flag to identify if 11g mode is enabled or not */ + uint32_t phy_11n: 1; /**< Bit: 2 flag to identify if 11n mode is enabled or not */ + uint32_t phy_lr: 1; /**< Bit: 3 flag to identify if low rate is enabled or not */ + uint32_t phy_11a: 1; /**< Bit: 4 flag to identify if 11ax mode is enabled or not */ + uint32_t phy_11ac: 1; /**< Bit: 5 flag to identify if 11ax mode is enabled or not */ + uint32_t phy_11ax: 1; /**< Bit: 6 flag to identify if 11ax mode is enabled or not */ + uint32_t is_mesh_child: 1; /**< Bit: 7 flag to identify mesh child */ + uint32_t reserved: 24; /**< Bit: 8..31 reserved */ } wifi_sta_info_t; /** - * @brief WiFi storage type + * @brief Wi-Fi storage type */ typedef enum { - WIFI_STORAGE_FLASH, /**< all configuration will store in both memory and flash */ - WIFI_STORAGE_RAM, /**< all configuration will only store in the memory */ + WIFI_STORAGE_FLASH, /**< All configuration will store in both memory and flash */ + WIFI_STORAGE_RAM, /**< All configuration will only store in the memory */ } wifi_storage_t; /** @@ -504,11 +506,11 @@ typedef enum { * Determines the frame type that the IE will be associated with. */ typedef enum { - WIFI_VND_IE_TYPE_BEACON, - WIFI_VND_IE_TYPE_PROBE_REQ, - WIFI_VND_IE_TYPE_PROBE_RESP, - WIFI_VND_IE_TYPE_ASSOC_REQ, - WIFI_VND_IE_TYPE_ASSOC_RESP, + WIFI_VND_IE_TYPE_BEACON, /**< Beacon frame */ + WIFI_VND_IE_TYPE_PROBE_REQ, /**< Probe request frame */ + WIFI_VND_IE_TYPE_PROBE_RESP, /**< Probe response frame */ + WIFI_VND_IE_TYPE_ASSOC_REQ, /**< Association request frame */ + WIFI_VND_IE_TYPE_ASSOC_RESP, /**< Association response frame */ } wifi_vendor_ie_type_t; /** @@ -517,14 +519,14 @@ typedef enum { * Each IE type can have up to two associated vendor ID elements. */ typedef enum { - WIFI_VND_IE_ID_0, - WIFI_VND_IE_ID_1, + WIFI_VND_IE_ID_0, /**< Vendor ID element 0 */ + WIFI_VND_IE_ID_1, /**< Vendor ID element 1 */ } wifi_vendor_ie_id_t; -#define WIFI_VENDOR_IE_ELEMENT_ID 0xDD +#define WIFI_VENDOR_IE_ELEMENT_ID 0xDD /**< Vendor Information Element ID */ /** - * @brief Operation Phymode + * @brief Operation PHY mode */ typedef enum { WIFI_PHY_MODE_LR, /**< PHY mode for Low Rate */ @@ -563,25 +565,25 @@ typedef enum { WIFI_PKT_MISC, /**< Other type, such as MIMO etc. 'buf' argument is wifi_promiscuous_pkt_t but the payload is zero length. */ } wifi_promiscuous_pkt_type_t; -#define WIFI_PROMIS_FILTER_MASK_ALL (0xFFFFFFFF) /**< filter all packets */ -#define WIFI_PROMIS_FILTER_MASK_MGMT (1) /**< filter the packets with type of WIFI_PKT_MGMT */ -#define WIFI_PROMIS_FILTER_MASK_CTRL (1<<1) /**< filter the packets with type of WIFI_PKT_CTRL */ -#define WIFI_PROMIS_FILTER_MASK_DATA (1<<2) /**< filter the packets with type of WIFI_PKT_DATA */ -#define WIFI_PROMIS_FILTER_MASK_MISC (1<<3) /**< filter the packets with type of WIFI_PKT_MISC */ -#define WIFI_PROMIS_FILTER_MASK_DATA_MPDU (1<<4) /**< filter the MPDU which is a kind of WIFI_PKT_DATA */ -#define WIFI_PROMIS_FILTER_MASK_DATA_AMPDU (1<<5) /**< filter the AMPDU which is a kind of WIFI_PKT_DATA */ -#define WIFI_PROMIS_FILTER_MASK_FCSFAIL (1<<6) /**< filter the FCS failed packets, do not open it in general */ +#define WIFI_PROMIS_FILTER_MASK_ALL (0xFFFFFFFF) /**< Filter all packets */ +#define WIFI_PROMIS_FILTER_MASK_MGMT (1) /**< Filter the packets with type of WIFI_PKT_MGMT */ +#define WIFI_PROMIS_FILTER_MASK_CTRL (1<<1) /**< Filter the packets with type of WIFI_PKT_CTRL */ +#define WIFI_PROMIS_FILTER_MASK_DATA (1<<2) /**< Filter the packets with type of WIFI_PKT_DATA */ +#define WIFI_PROMIS_FILTER_MASK_MISC (1<<3) /**< Filter the packets with type of WIFI_PKT_MISC */ +#define WIFI_PROMIS_FILTER_MASK_DATA_MPDU (1<<4) /**< Filter the MPDU which is a kind of WIFI_PKT_DATA */ +#define WIFI_PROMIS_FILTER_MASK_DATA_AMPDU (1<<5) /**< Filter the AMPDU which is a kind of WIFI_PKT_DATA */ +#define WIFI_PROMIS_FILTER_MASK_FCSFAIL (1<<6) /**< Filter the FCS failed packets, do not open it in general */ -#define WIFI_PROMIS_CTRL_FILTER_MASK_ALL (0xFF800000) /**< filter all control packets */ -#define WIFI_PROMIS_CTRL_FILTER_MASK_WRAPPER (1<<23) /**< filter the control packets with subtype of Control Wrapper */ -#define WIFI_PROMIS_CTRL_FILTER_MASK_BAR (1<<24) /**< filter the control packets with subtype of Block Ack Request */ -#define WIFI_PROMIS_CTRL_FILTER_MASK_BA (1<<25) /**< filter the control packets with subtype of Block Ack */ -#define WIFI_PROMIS_CTRL_FILTER_MASK_PSPOLL (1<<26) /**< filter the control packets with subtype of PS-Poll */ -#define WIFI_PROMIS_CTRL_FILTER_MASK_RTS (1<<27) /**< filter the control packets with subtype of RTS */ -#define WIFI_PROMIS_CTRL_FILTER_MASK_CTS (1<<28) /**< filter the control packets with subtype of CTS */ -#define WIFI_PROMIS_CTRL_FILTER_MASK_ACK (1<<29) /**< filter the control packets with subtype of ACK */ -#define WIFI_PROMIS_CTRL_FILTER_MASK_CFEND (1<<30) /**< filter the control packets with subtype of CF-END */ -#define WIFI_PROMIS_CTRL_FILTER_MASK_CFENDACK (1<<31) /**< filter the control packets with subtype of CF-END+CF-ACK */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_ALL (0xFF800000) /**< Filter all control packets */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_WRAPPER (1<<23) /**< Filter the control packets with subtype of Control Wrapper */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_BAR (1<<24) /**< Filter the control packets with subtype of Block Ack Request */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_BA (1<<25) /**< Filter the control packets with subtype of Block Ack */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_PSPOLL (1<<26) /**< Filter the control packets with subtype of PS-Poll */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_RTS (1<<27) /**< Filter the control packets with subtype of RTS */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_CTS (1<<28) /**< Filter the control packets with subtype of CTS */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_ACK (1<<29) /**< Filter the control packets with subtype of ACK */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_CFEND (1<<30) /**< Filter the control packets with subtype of CF-END */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_CFENDACK (1<<31) /**< Filter the control packets with subtype of CF-END+CF-ACK */ /** * @brief Mask for filtering different packet types in promiscuous mode @@ -590,9 +592,9 @@ typedef struct { uint32_t filter_mask; /**< OR of one or more filter values WIFI_PROMIS_FILTER_* */ } wifi_promiscuous_filter_t; -#define WIFI_EVENT_MASK_ALL (0xFFFFFFFF) /**< mask all WiFi events */ -#define WIFI_EVENT_MASK_NONE (0) /**< mask none of the WiFi events */ -#define WIFI_EVENT_MASK_AP_PROBEREQRECVED (BIT(0)) /**< mask SYSTEM_EVENT_AP_PROBEREQRECVED event */ +#define WIFI_EVENT_MASK_ALL (0xFFFFFFFF) /**< Mask all Wi-Fi events */ +#define WIFI_EVENT_MASK_NONE (0) /**< Mask none of the Wi-Fi events */ +#define WIFI_EVENT_MASK_AP_PROBEREQRECVED (BIT(0)) /**< Mask SYSTEM_EVENT_AP_PROBEREQRECVED event */ /** * @brief CSI data type @@ -601,7 +603,7 @@ typedef struct { typedef struct wifi_csi_info_t wifi_csi_info_t; /** - * @brief WiFi GPIO configuration for antenna selection + * @brief Wi-Fi GPIO configuration for antenna selection * */ typedef struct { @@ -610,7 +612,7 @@ typedef struct { } wifi_ant_gpio_t; /** - * @brief WiFi GPIOs configuration for antenna selection + * @brief Wi-Fi GPIOs configuration for antenna selection * */ typedef struct { @@ -618,24 +620,24 @@ typedef struct { } wifi_ant_gpio_config_t; /** - * @brief WiFi antenna mode + * @brief Wi-Fi antenna mode * */ typedef enum { - WIFI_ANT_MODE_ANT0, /**< Enable WiFi antenna 0 only */ - WIFI_ANT_MODE_ANT1, /**< Enable WiFi antenna 1 only */ - WIFI_ANT_MODE_AUTO, /**< Enable WiFi antenna 0 and 1, automatically select an antenna */ - WIFI_ANT_MODE_MAX, /**< Invalid WiFi enabled antenna */ + WIFI_ANT_MODE_ANT0, /**< Enable Wi-Fi antenna 0 only */ + WIFI_ANT_MODE_ANT1, /**< Enable Wi-Fi antenna 1 only */ + WIFI_ANT_MODE_AUTO, /**< Enable Wi-Fi antenna 0 and 1, automatically select an antenna */ + WIFI_ANT_MODE_MAX, /**< Invalid Wi-Fi enabled antenna */ } wifi_ant_mode_t; /** - * @brief WiFi antenna configuration + * @brief Wi-Fi antenna configuration * */ typedef struct { - wifi_ant_mode_t rx_ant_mode; /**< WiFi antenna mode for receiving */ + wifi_ant_mode_t rx_ant_mode; /**< Wi-Fi antenna mode for receiving */ wifi_ant_t rx_ant_default; /**< Default antenna mode for receiving, it's ignored if rx_ant_mode is not WIFI_ANT_MODE_AUTO */ - wifi_ant_mode_t tx_ant_mode; /**< WiFi antenna mode for transmission, it can be set to WIFI_ANT_MODE_AUTO only if rx_ant_mode is set to WIFI_ANT_MODE_AUTO */ + wifi_ant_mode_t tx_ant_mode; /**< Wi-Fi antenna mode for transmission, it can be set to WIFI_ANT_MODE_AUTO only if rx_ant_mode is set to WIFI_ANT_MODE_AUTO */ uint8_t enabled_ant0: 4, /**< Index (in antenna GPIO configuration) of enabled WIFI_ANT_MODE_ANT0 */ enabled_ant1: 4; /**< Index (in antenna GPIO configuration) of enabled WIFI_ANT_MODE_ANT1 */ } wifi_ant_config_t; @@ -643,10 +645,10 @@ typedef struct { /** * @brief The Rx callback function of Action Tx operations * - * @param hdr pointer to the IEEE 802.11 Header structure - * @param payload pointer to the Payload following 802.11 Header - * @param len length of the Payload - * @param channel channel number the frame is received on + * @param hdr Pointer to the IEEE 802.11 Header structure + * @param payload Pointer to the Payload following 802.11 Header + * @param len Length of the Payload + * @param channel Channel number the frame is received on * */ typedef int (* wifi_action_rx_cb_t)(uint8_t *hdr, uint8_t *payload, @@ -655,7 +657,7 @@ typedef int (* wifi_action_rx_cb_t)(uint8_t *hdr, uint8_t *payload, * @brief Action Frame Tx Request */ typedef struct { - wifi_interface_t ifx; /**< WiFi interface to send request to */ + wifi_interface_t ifx; /**< Wi-Fi interface to send request to */ uint8_t dest_mac[6]; /**< Destination MAC address */ bool no_ack; /**< Indicates no ack required */ wifi_action_rx_cb_t rx_cb; /**< Rx Callback to receive any response */ @@ -676,16 +678,16 @@ typedef struct { WIFI_EVENT_FTM_REPORT to get FTM report */ } wifi_ftm_initiator_cfg_t; -#define ESP_WIFI_NAN_MAX_SVC_SUPPORTED 2 -#define ESP_WIFI_NAN_DATAPATH_MAX_PEERS 2 +#define ESP_WIFI_NAN_MAX_SVC_SUPPORTED 2 /**< Maximum number of NAN services supported */ +#define ESP_WIFI_NAN_DATAPATH_MAX_PEERS 2 /**< Maximum number of NAN datapath peers supported */ -#define ESP_WIFI_NDP_ROLE_INITIATOR 1 -#define ESP_WIFI_NDP_ROLE_RESPONDER 2 +#define ESP_WIFI_NDP_ROLE_INITIATOR 1 /**< Initiator role for NAN Data Path */ +#define ESP_WIFI_NDP_ROLE_RESPONDER 2 /**< Responder role for NAN Data Path */ -#define ESP_WIFI_MAX_SVC_NAME_LEN 256 -#define ESP_WIFI_MAX_FILTER_LEN 256 -#define ESP_WIFI_MAX_SVC_INFO_LEN 64 -#define ESP_WIFI_MAX_NEIGHBOR_REP_LEN 64 +#define ESP_WIFI_MAX_SVC_NAME_LEN 256 /**< Maximum length of NAN service name */ +#define ESP_WIFI_MAX_FILTER_LEN 256 /**< Maximum length of NAN service filter */ +#define ESP_WIFI_MAX_SVC_INFO_LEN 64 /**< Maximum length of NAN service info */ +#define ESP_WIFI_MAX_NEIGHBOR_REP_LEN 64 /**< Maximum length of NAN Neighbor Report */ /** * @brief NAN Services types @@ -766,7 +768,35 @@ typedef struct { } wifi_nan_datapath_end_req_t; /** - * @brief WiFi PHY rate encodings + * @brief Wi-Fi PHY rate encodings + * + * @note Rate Table: MCS Rate and Guard Interval Information + * | MCS RATE | HT20 | HT40 | HE20 | VHT20 | + * |-----------------------------|-------------------------|-------------------------|-------------------------|-------------------------| + * | WIFI_PHY_RATE_MCS0_LGI | 6.5 Mbps (800 ns) | 13.5 Mbps (800 ns) | 8.1 Mbps (1600 ns) | 6.5 Mbps (800 ns) | + * | WIFI_PHY_RATE_MCS1_LGI | 13 Mbps (800 ns) | 27 Mbps (800 ns) | 16.3 Mbps (1600 ns) | 13 Mbps (800 ns) | + * | WIFI_PHY_RATE_MCS2_LGI | 19.5 Mbps (800 ns) | 40.5 Mbps (800 ns) | 24.4 Mbps (1600 ns) | 19.5 Mbps (800 ns) | + * | WIFI_PHY_RATE_MCS3_LGI | 26 Mbps (800 ns) | 54 Mbps (800 ns) | 32.5 Mbps (1600 ns) | 26 Mbps (800 ns) | + * | WIFI_PHY_RATE_MCS4_LGI | 39 Mbps (800 ns) | 81 Mbps (800 ns) | 48.8 Mbps (1600 ns) | 39 Mbps (800 ns) | + * | WIFI_PHY_RATE_MCS5_LGI | 52 Mbps (800 ns) | 108 Mbps (800 ns) | 65 Mbps (1600 ns) | 52 Mbps (800 ns) | + * | WIFI_PHY_RATE_MCS6_LGI | 58.5 Mbps (800 ns) | 121.5 Mbps (800 ns) | 73.1 Mbps (1600 ns) | 58.5 Mbps (800 ns) | + * | WIFI_PHY_RATE_MCS7_LGI | 65 Mbps (800 ns) | 135 Mbps (800 ns) | 81.3 Mbps (1600 ns) | 65 Mbps (800 ns) | + * | WIFI_PHY_RATE_MCS8_LGI | | | 97.5 Mbps (1600 ns) | | + * | WIFI_PHY_RATE_MCS9_LGI | | | 108.3 Mbps (1600 ns) | | + * + * @note + * | MCS RATE | HT20 | HT40 | HE20 | VHT20 | + * |-----------------------------|-------------------------|-------------------------|-------------------------|-------------------------| + * | WIFI_PHY_RATE_MCS0_SGI | 7.2 Mbps (400 ns) | 15 Mbps (400 ns) | 8.6 Mbps (800 ns) | 7.2 Mbps (400 ns) | + * | WIFI_PHY_RATE_MCS1_SGI | 14.4 Mbps (400 ns) | 30 Mbps (400 ns) | 17.2 Mbps (800 ns) | 14.4 Mbps (400 ns) | + * | WIFI_PHY_RATE_MCS2_SGI | 21.7 Mbps (400 ns) | 45 Mbps (400 ns) | 25.8 Mbps (800 ns) | 21.7 Mbps (400 ns) | + * | WIFI_PHY_RATE_MCS3_SGI | 28.9 Mbps (400 ns) | 60 Mbps (400 ns) | 34.4 Mbps (800 ns) | 28.9 Mbps (400 ns) | + * | WIFI_PHY_RATE_MCS4_SGI | 43.3 Mbps (400 ns) | 90 Mbps (400 ns) | 51.6 Mbps (800 ns) | 43.3 Mbps (400 ns) | + * | WIFI_PHY_RATE_MCS5_SGI | 57.8 Mbps (400 ns) | 120 Mbps (400 ns) | 68.8 Mbps (800 ns) | 57.8 Mbps (400 ns) | + * | WIFI_PHY_RATE_MCS6_SGI | 65 Mbps (400 ns) | 135 Mbps (400 ns) | 77.4 Mbps (800 ns) | 65 Mbps (400 ns) | + * | WIFI_PHY_RATE_MCS7_SGI | 72.2 Mbps (400 ns) | 150 Mbps (400 ns) | 86 Mbps (800 ns) | 72.2 Mbps (400 ns) | + * | WIFI_PHY_RATE_MCS8_SGI | | | 103.2 Mbps (800 ns) | | + * | WIFI_PHY_RATE_MCS9_SGI | | | 114.7 Mbps (800 ns) | | * */ typedef enum { @@ -785,22 +815,7 @@ typedef enum { WIFI_PHY_RATE_36M = 0x0D, /**< 36 Mbps */ WIFI_PHY_RATE_18M = 0x0E, /**< 18 Mbps */ WIFI_PHY_RATE_9M = 0x0F, /**< 9 Mbps */ - /**< rate table and guard interval information for each MCS rate*/ - /* - ----------------------------------------------------------------------------------------------------------- - MCS RATE | HT20 | HT40 | HE20 | - WIFI_PHY_RATE_MCS0_LGI | 6.5 Mbps (800ns) | 13.5 Mbps (800ns) | 8.1 Mbps (1600ns) | - WIFI_PHY_RATE_MCS1_LGI | 13 Mbps (800ns) | 27 Mbps (800ns) | 16.3 Mbps (1600ns) | - WIFI_PHY_RATE_MCS2_LGI | 19.5 Mbps (800ns) | 40.5 Mbps (800ns) | 24.4 Mbps (1600ns) | - WIFI_PHY_RATE_MCS3_LGI | 26 Mbps (800ns) | 54 Mbps (800ns) | 32.5 Mbps (1600ns) | - WIFI_PHY_RATE_MCS4_LGI | 39 Mbps (800ns) | 81 Mbps (800ns) | 48.8 Mbps (1600ns) | - WIFI_PHY_RATE_MCS5_LGI | 52 Mbps (800ns) | 108 Mbps (800ns) | 65 Mbps (1600ns) | - WIFI_PHY_RATE_MCS6_LGI | 58.5 Mbps (800ns) | 121.5 Mbps (800ns) | 73.1 Mbps (1600ns) | - WIFI_PHY_RATE_MCS7_LGI | 65 Mbps (800ns) | 135 Mbps (800ns) | 81.3 Mbps (1600ns) | - WIFI_PHY_RATE_MCS8_LGI | ----- | ----- | 97.5 Mbps (1600ns) | - WIFI_PHY_RATE_MCS9_LGI | ----- | ----- | 108.3 Mbps (1600ns) | - ----------------------------------------------------------------------------------------------------------- - */ + WIFI_PHY_RATE_MCS0_LGI = 0x10, /**< MCS0 with long GI */ WIFI_PHY_RATE_MCS1_LGI = 0x11, /**< MCS1 with long GI */ WIFI_PHY_RATE_MCS2_LGI = 0x12, /**< MCS2 with long GI */ @@ -813,21 +828,7 @@ typedef enum { WIFI_PHY_RATE_MCS8_LGI, /**< MCS8 with long GI */ WIFI_PHY_RATE_MCS9_LGI, /**< MCS9 with long GI */ #endif - /* - ----------------------------------------------------------------------------------------------------------- - MCS RATE | HT20 | HT40 | HE20 | - WIFI_PHY_RATE_MCS0_SGI | 7.2 Mbps (400ns) | 15 Mbps (400ns) | 8.6 Mbps (800ns) | - WIFI_PHY_RATE_MCS1_SGI | 14.4 Mbps (400ns) | 30 Mbps (400ns) | 17.2 Mbps (800ns) | - WIFI_PHY_RATE_MCS2_SGI | 21.7 Mbps (400ns) | 45 Mbps (400ns) | 25.8 Mbps (800ns) | - WIFI_PHY_RATE_MCS3_SGI | 28.9 Mbps (400ns) | 60 Mbps (400ns) | 34.4 Mbps (800ns) | - WIFI_PHY_RATE_MCS4_SGI | 43.3 Mbps (400ns) | 90 Mbps (400ns) | 51.6 Mbps (800ns) | - WIFI_PHY_RATE_MCS5_SGI | 57.8 Mbps (400ns) | 120 Mbps (400ns) | 68.8 Mbps (800ns) | - WIFI_PHY_RATE_MCS6_SGI | 65 Mbps (400ns) | 135 Mbps (400ns) | 77.4 Mbps (800ns) | - WIFI_PHY_RATE_MCS7_SGI | 72.2 Mbps (400ns) | 150 Mbps (400ns) | 86 Mbps (800ns) | - WIFI_PHY_RATE_MCS8_SGI | ----- | ----- | 103.2 Mbps (800ns) | - WIFI_PHY_RATE_MCS9_SGI | ----- | ----- | 114.7 Mbps (800ns) | - ----------------------------------------------------------------------------------------------------------- - */ + WIFI_PHY_RATE_MCS0_SGI, /**< MCS0 with short GI */ WIFI_PHY_RATE_MCS1_SGI, /**< MCS1 with short GI */ WIFI_PHY_RATE_MCS2_SGI, /**< MCS2 with short GI */ @@ -846,27 +847,27 @@ typedef enum { } wifi_phy_rate_t; /** - * @brief WiFi event declarations + * @brief Wi-Fi event declarations */ typedef enum { - WIFI_EVENT_WIFI_READY = 0, /**< WiFi ready */ + WIFI_EVENT_WIFI_READY = 0, /**< Wi-Fi ready */ WIFI_EVENT_SCAN_DONE, /**< Finished scanning AP */ WIFI_EVENT_STA_START, /**< Station start */ WIFI_EVENT_STA_STOP, /**< Station stop */ WIFI_EVENT_STA_CONNECTED, /**< Station connected to AP */ WIFI_EVENT_STA_DISCONNECTED, /**< Station disconnected from AP */ - WIFI_EVENT_STA_AUTHMODE_CHANGE, /**< the auth mode of AP connected by device's station changed */ + WIFI_EVENT_STA_AUTHMODE_CHANGE, /**< The auth mode of AP connected by device's station changed */ - WIFI_EVENT_STA_WPS_ER_SUCCESS, /**< Station wps succeeds in enrollee mode */ - WIFI_EVENT_STA_WPS_ER_FAILED, /**< Station wps fails in enrollee mode */ - WIFI_EVENT_STA_WPS_ER_TIMEOUT, /**< Station wps timeout in enrollee mode */ - WIFI_EVENT_STA_WPS_ER_PIN, /**< Station wps pin code in enrollee mode */ - WIFI_EVENT_STA_WPS_ER_PBC_OVERLAP, /**< Station wps overlap in enrollee mode */ + WIFI_EVENT_STA_WPS_ER_SUCCESS, /**< Station WPS succeeds in enrollee mode */ + WIFI_EVENT_STA_WPS_ER_FAILED, /**< Station WPS fails in enrollee mode */ + WIFI_EVENT_STA_WPS_ER_TIMEOUT, /**< Station WPS timeout in enrollee mode */ + WIFI_EVENT_STA_WPS_ER_PIN, /**< Station WPS pin code in enrollee mode */ + WIFI_EVENT_STA_WPS_ER_PBC_OVERLAP, /**< Station WPS overlap in enrollee mode */ WIFI_EVENT_AP_START, /**< Soft-AP start */ WIFI_EVENT_AP_STOP, /**< Soft-AP stop */ - WIFI_EVENT_AP_STACONNECTED, /**< a station connected to Soft-AP */ - WIFI_EVENT_AP_STADISCONNECTED, /**< a station disconnected from Soft-AP */ + WIFI_EVENT_AP_STACONNECTED, /**< A station connected to Soft-AP */ + WIFI_EVENT_AP_STADISCONNECTED, /**< A station disconnected from Soft-AP */ WIFI_EVENT_AP_PROBEREQRECVED, /**< Receive probe request packet in soft-AP interface */ WIFI_EVENT_FTM_REPORT, /**< Receive report of FTM procedure */ @@ -903,15 +904,15 @@ typedef enum { WIFI_EVENT_NDP_INDICATION, /**< Received NDP Request from a NAN Peer */ WIFI_EVENT_NDP_CONFIRM, /**< NDP Confirm Indication */ WIFI_EVENT_NDP_TERMINATED, /**< NAN Datapath terminated indication */ - WIFI_EVENT_HOME_CHANNEL_CHANGE, /**< WiFi home channel change，doesn't occur when scanning */ + WIFI_EVENT_HOME_CHANNEL_CHANGE, /**< Wi-Fi home channel change，doesn't occur when scanning */ WIFI_EVENT_STA_NEIGHBOR_REP, /**< Received Neighbor Report response */ - WIFI_EVENT_MAX, /**< Invalid WiFi event ID */ + WIFI_EVENT_MAX, /**< Invalid Wi-Fi event ID */ } wifi_event_t; /** @cond **/ -/** @brief WiFi event base declaration */ +/** @brief Wi-Fi event base declaration */ ESP_EVENT_DECLARE_BASE(WIFI_EVENT); /** @endcond **/ @@ -919,9 +920,9 @@ ESP_EVENT_DECLARE_BASE(WIFI_EVENT); * @brief Argument structure for WIFI_EVENT_SCAN_DONE event */ typedef struct { - uint32_t status; /**< status of scanning APs: 0 — success, 1 - failure */ - uint8_t number; /**< number of scan results */ - uint8_t scan_id; /**< scan sequence number, used for block scan */ + uint32_t status; /**< Status of scanning APs: 0 — success, 1 - failure */ + uint8_t number; /**< Number of scan results */ + uint8_t scan_id; /**< Scan sequence number, used for block scan */ } wifi_event_sta_scan_done_t; /** @@ -931,9 +932,9 @@ typedef struct { uint8_t ssid[32]; /**< SSID of connected AP */ uint8_t ssid_len; /**< SSID length of connected AP */ uint8_t bssid[6]; /**< BSSID of connected AP*/ - uint8_t channel; /**< channel of connected AP*/ - wifi_auth_mode_t authmode;/**< authentication mode used by AP*/ - uint16_t aid; /**< authentication id assigned by the connected AP */ + uint8_t channel; /**< Channel of connected AP*/ + wifi_auth_mode_t authmode;/**< Authentication mode used by AP*/ + uint16_t aid; /**< Authentication id assigned by the connected AP */ } wifi_event_sta_connected_t; /** @@ -943,16 +944,16 @@ typedef struct { uint8_t ssid[32]; /**< SSID of disconnected AP */ uint8_t ssid_len; /**< SSID length of disconnected AP */ uint8_t bssid[6]; /**< BSSID of disconnected AP */ - uint8_t reason; /**< reason of disconnection */ - int8_t rssi; /**< rssi of disconnection */ + uint8_t reason; /**< Disconnection reason */ + int8_t rssi; /**< Disconnection RSSI */ } wifi_event_sta_disconnected_t; /** * @brief Argument structure for WIFI_EVENT_STA_AUTHMODE_CHANGE event */ typedef struct { - wifi_auth_mode_t old_mode; /**< the old auth mode of AP */ - wifi_auth_mode_t new_mode; /**< the new auth mode of AP */ + wifi_auth_mode_t old_mode; /**< Old auth mode of AP */ + wifi_auth_mode_t new_mode; /**< New auth mode of AP */ } wifi_event_sta_authmode_change_t; /** @@ -969,12 +970,12 @@ typedef enum { WPS_FAIL_REASON_NORMAL = 0, /**< WPS normal fail reason */ WPS_FAIL_REASON_RECV_M2D, /**< WPS receive M2D frame */ WPS_FAIL_REASON_RECV_DEAUTH, /**< Recv deauth from AP while wps handshake */ - WPS_FAIL_REASON_MAX + WPS_FAIL_REASON_MAX /**< Max WPS fail reason */ } wifi_event_sta_wps_fail_reason_t; -#define MAX_SSID_LEN 32 -#define MAX_PASSPHRASE_LEN 64 -#define MAX_WPS_AP_CRED 3 +#define MAX_SSID_LEN 32 /**< Maximum length of SSID */ +#define MAX_PASSPHRASE_LEN 64 /**< Maximum length of passphrase */ +#define MAX_WPS_AP_CRED 3 /**< Maximum number of AP credentials received from WPS handshake */ /** * @brief Argument structure for WIFI_EVENT_STA_WPS_ER_SUCCESS event @@ -992,18 +993,18 @@ typedef struct { */ typedef struct { uint8_t mac[6]; /**< MAC address of the station connected to Soft-AP */ - uint8_t aid; /**< the aid that soft-AP gives to the station connected to */ - bool is_mesh_child; /**< flag to identify mesh child */ + uint8_t aid; /**< AID assigned by the Soft-AP to the connected station */ + bool is_mesh_child; /**< Flag indicating whether the connected station is a mesh child */ } wifi_event_ap_staconnected_t; /** * @brief Argument structure for WIFI_EVENT_AP_STADISCONNECTED event */ typedef struct { - uint8_t mac[6]; /**< MAC address of the station disconnects to soft-AP */ - uint8_t aid; /**< the aid that soft-AP gave to the station disconnects to */ - bool is_mesh_child; /**< flag to identify mesh child */ - uint16_t reason; /**< reason of disconnection */ + uint8_t mac[6]; /**< MAC address of the station disconnects from the soft-AP */ + uint8_t aid; /**< AID that the Soft-AP assigned to the disconnected station */ + bool is_mesh_child; /**< Flag indicating whether the disconnected station is a mesh child */ + uint16_t reason; /**< Disconnection reason */ } wifi_event_ap_stadisconnected_t; /** @@ -1025,10 +1026,10 @@ typedef struct { * @brief Argument structure for WIFI_EVENT_HOME_CHANNEL_CHANGE event */ typedef struct { - uint8_t old_chan; /**< old home channel of the device */ - wifi_second_chan_t old_snd; /**< old second channel of the device */ - uint8_t new_chan; /**< new home channel of the device */ - wifi_second_chan_t new_snd; /**< new second channel of the device */ + uint8_t old_chan; /**< Old home channel of the device */ + wifi_second_chan_t old_snd; /**< Old second channel of the device */ + uint8_t new_chan; /**< New home channel of the device */ + wifi_second_chan_t new_snd; /**< New second channel of the device */ } wifi_event_home_channel_change_t; /** @@ -1046,7 +1047,11 @@ typedef enum { } wifi_ftm_status_t; /** - * @brief Argument structure for FTM report entry + * @brief Structure representing a report entry for Fine Timing Measurement (FTM) in Wi-Fi. + * + * This structure holds the information related to the FTM process between a Wi-Fi FTM Initiator + * and a Wi-Fi FTM Responder. FTM is used for precise distance measurement by timing the exchange + * of frames between devices. */ typedef struct { uint8_t dlog_token; /**< Dialog Token of the FTM frame */ @@ -1072,18 +1077,18 @@ typedef struct { uint8_t ftm_report_num_entries; /**< Number of entries in the FTM Report data */ } wifi_event_ftm_report_t; -#define WIFI_STATIS_BUFFER (1<<0) -#define WIFI_STATIS_RXTX (1<<1) -#define WIFI_STATIS_HW (1<<2) -#define WIFI_STATIS_DIAG (1<<3) -#define WIFI_STATIS_PS (1<<4) -#define WIFI_STATIS_ALL (-1) +#define WIFI_STATIS_BUFFER (1<<0) /**< Buffer statistic */ +#define WIFI_STATIS_RXTX (1<<1) /**< RX/TX statistic */ +#define WIFI_STATIS_HW (1<<2) /**< Hardware statistic */ +#define WIFI_STATIS_DIAG (1<<3) /**< Diagnostic statistic */ +#define WIFI_STATIS_PS (1<<4) /**< Power save statistic */ +#define WIFI_STATIS_ALL (-1) /**< All statistic */ /** * @brief Argument structure for WIFI_EVENT_ACTION_TX_STATUS event */ typedef struct { - wifi_interface_t ifx; /**< WiFi interface to send request to */ + wifi_interface_t ifx; /**< Wi-Fi interface to send request to */ uint32_t context; /**< Context to identify the request */ uint8_t da[6]; /**< Destination MAC address */ uint8_t status; /**< Status of the operation */ @@ -1110,7 +1115,7 @@ typedef enum { WPS_AP_FAIL_REASON_NORMAL = 0, /**< WPS normal fail reason */ WPS_AP_FAIL_REASON_CONFIG, /**< WPS failed due to incorrect config */ WPS_AP_FAIL_REASON_AUTH, /**< WPS failed during auth */ - WPS_AP_FAIL_REASON_MAX, + WPS_AP_FAIL_REASON_MAX, /**< Max WPS fail reason */ } wps_fail_reason_t; /** diff --git a/docs/zh_CN/api-reference/network/esp_wifi.rst b/docs/zh_CN/api-reference/network/esp_wifi.rst index f54c642411..f2c0509d12 100644 --- a/docs/zh_CN/api-reference/network/esp_wifi.rst +++ b/docs/zh_CN/api-reference/network/esp_wifi.rst @@ -28,6 +28,7 @@ API 参考 .. include-build-file:: inc/esp_wifi.inc .. include-build-file:: inc/esp_wifi_types.inc +.. include-build-file:: inc/esp_wifi_types_generic.inc .. include-build-file:: inc/esp_eap_client.inc .. include-build-file:: inc/esp_wps.inc .. include-build-file:: inc/esp_rrm.inc