Merge branch 'feat/ble_log_v2_esp_target_support_v5.3' into 'release/v5.3'

Feat/ble log v2 esp target support (v5.3)

See merge request espressif/esp-idf!41919

components/bt/common/ble_log/Kconfig.in

@@ -33,12 +33,32 @@ if BLE_LOG_ENABLED
             try to use the LBM with spin lock protection. So the more LBMs with atomic
             lock protection are created, the more ISRs can nest.
 
+    config BLE_LOG_IS_ESP_CONTROLLER
+        bool "Current BLE Controller is ESP BLE Controller"
+        depends on BT_CONTROLLER_ENABLED
+        depends on SOC_ESP_NIMBLE_CONTROLLER
+        default y
+        select BT_LE_CONTROLLER_LOG_ENABLED
+        select BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
+        select BLE_LOG_LL_ENABLED
+        help
+            Current BLE Controller is ESP BLE Controller
+
+    config BLE_LOG_IS_ESP_LEGACY_CONTROLLER
+        bool "Current BLE Controller is ESP BLE Legacy Controller"
+        depends on BT_CONTROLLER_ENABLED
+        depends on !SOC_ESP_NIMBLE_CONTROLLER
+        depends on BT_CTRL_RUN_IN_FLASH_ONLY
+        default y
+        select BT_CTRL_LE_LOG_EN
+        select BLE_LOG_LL_ENABLED
+        help
+            Current BLE Controller is ESP BLE Legacy Controller
+
     config BLE_LOG_LL_ENABLED
         bool "Enable BLE Log for Link Layer"
         depends on BT_CONTROLLER_ENABLED
-        default y
+        default n
-        select BT_LE_CONTROLLER_LOG_ENABLED
-        select BT_LE_CONTROLLER_LOG_MODE_BLE_LOG
         help
             Enable BLE Log for Link Layer
 
@@ -96,11 +116,13 @@ if BLE_LOG_ENABLED
 
         config BLE_LOG_PRPH_SPI_MASTER_DMA
             bool "Utilize SPI master DMA driver as transport"
+            depends on SOC_GPSPI_SUPPORTED
             help
                 Utilize SPI master DMA driver as transport
 
         config BLE_LOG_PRPH_UART_DMA
             bool "Utilize UART DMA driver as transport"
+            depends on SOC_UHCI_SUPPORTED
             help
                 Utilize UART DMA driver as transport
     endchoice

components/bt/common/ble_log/src/internal_include/ble_log_lbm.h

@@ -17,7 +17,6 @@
 
 #include "freertos/FreeRTOS.h"
 #include "freertos/semphr.h"
-#include "freertos/portmacro.h"
 
 /* ------------------------- */
 /*     Log Frame Defines     */

components/bt/common/ble_log/src/internal_include/ble_log_util.h

@@ -17,11 +17,11 @@
 #include <string.h>
 
 #include "esp_bit_defs.h"
+#include "freertos/FreeRTOS.h"
 
 #ifndef UNIT_TEST
-#include "freertos/portmacro.h"
 #include "esp_heap_caps.h"
-#include "esp_rom_serial_output.h"
+#include "esp_rom_uart.h"
 #endif /* !UNIT_TEST */
 
 /* MACRO */
@@ -47,18 +47,9 @@
 #define BLE_LOG_MEMSET(ptr, value, len)         memset(ptr, value, len)
 
 /* Critical section wrapper */
-#ifndef CONFIG_BLE_LOG_LL_ENABLED
 extern portMUX_TYPE ble_log_spin_lock;
 #define BLE_LOG_ENTER_CRITICAL()                portENTER_CRITICAL_SAFE(&ble_log_spin_lock);
 #define BLE_LOG_EXIT_CRITICAL()                 portEXIT_CRITICAL_SAFE(&ble_log_spin_lock);
-#else /* CONFIG_BLE_LOG_LL_ENABLED */
-/* Note
- * It's mandatory to use the same spin lock with Link Layer in multi-core system */
-extern uint32_t npl_freertos_hw_enter_critical(void);
-extern void npl_freertos_hw_exit_critical(uint32_t ctx);
-#define BLE_LOG_ENTER_CRITICAL()                npl_freertos_hw_enter_critical()
-#define BLE_LOG_EXIT_CRITICAL()                 npl_freertos_hw_exit_critical(0)
-#endif /* !CONFIG_BLE_LOG_LL_ENABLED */
 
 #define BLE_LOG_ACQUIRE_SPIN_LOCK(spin_lock)    portENTER_CRITICAL_SAFE(spin_lock)
 #define BLE_LOG_RELEASE_SPIN_LOCK(spin_lock)    portEXIT_CRITICAL_SAFE(spin_lock)

components/bt/common/ble_log/src/prph/ble_log_prph_uart_dma.c

@@ -23,7 +23,7 @@
 
 /* MACRO */
 #define BLE_LOG_UART_MAX_TRANSFER_SIZE      (10240)
-#define BLE_LOG_UART_RX_BUF_SIZE            (32)
+#define BLE_LOG_UART_RX_BUF_SIZE            (256)
 #define BLE_LOG_UART_DMA_BURST_SIZE         (32)
 #if BLE_LOG_PRPH_UART_DMA_REDIR
 #define BLE_LOG_UART_REDIR_BUF_SIZE         (512)
@@ -95,8 +95,6 @@ bool ble_log_prph_init(size_t trans_cnt)
         .data_bits = UART_DATA_8_BITS,
         .parity = UART_PARITY_DISABLE,
         .stop_bits = UART_STOP_BITS_1,
-        .flow_ctrl = UART_HW_FLOWCTRL_CTS_RTS,
-        .rx_flow_ctrl_thresh = 122,
     };
     if ((uart_param_config(CONFIG_BLE_LOG_PRPH_UART_DMA_PORT, &uart_config) != ESP_OK) ||
         (uart_set_pin(CONFIG_BLE_LOG_PRPH_UART_DMA_PORT,

components/bt/controller/esp32/bt.c

@@ -48,9 +48,13 @@
 #include "esp_rom_sys.h"
 #include "hli_api.h"
 
+#if CONFIG_BLE_LOG_ENABLED
+#include "ble_log.h"
+#else /* !CONFIG_BLE_LOG_ENABLED */
 #if CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
 #include "ble_log/ble_log_spi_out.h"
 #endif // CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
+#endif /* CONFIG_BLE_LOG_ENABLED */
 
 #if CONFIG_BT_ENABLED
 
@@ -1702,6 +1706,13 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
     coex_init();
 #endif
 
+#if CONFIG_BLE_LOG_ENABLED
+    if (!ble_log_init()) {
+        ESP_LOGE(BTDM_LOG_TAG, "BLE Log v2 init failed");
+        err = ESP_ERR_NO_MEM;
+        goto error;
+    }
+#else /* !CONFIG_BLE_LOG_ENABLED */
 #if CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
     if (ble_log_spi_out_init() != 0) {
         ESP_LOGE(BTDM_LOG_TAG, "BLE Log SPI output init failed");
@@ -1709,6 +1720,7 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
         goto error;
     }
 #endif // CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
+#endif /* CONFIG_BLE_LOG_ENABLED */
 
     btdm_cfg_mask = btdm_config_mask_load();
 
@@ -1737,9 +1749,13 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
 
 error:
 
+#if CONFIG_BLE_LOG_ENABLED
+    ble_log_deinit();
+#else /* !CONFIG_BLE_LOG_ENABLED */
 #if CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
     ble_log_spi_out_deinit();
 #endif // CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
+#endif /* CONFIG_BLE_LOG_ENABLED */
 
     bt_controller_deinit_internal();
 
@@ -1752,9 +1768,13 @@ esp_err_t esp_bt_controller_deinit(void)
         return ESP_ERR_INVALID_STATE;
     }
 
+#if CONFIG_BLE_LOG_ENABLED
+    ble_log_deinit();
+#else /* !CONFIG_BLE_LOG_ENABLED */
 #if CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
     ble_log_spi_out_deinit();
 #endif // CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
+#endif /* CONFIG_BLE_LOG_ENABLED */
 
     btdm_controller_deinit();
 

components/bt/controller/esp32c2/Kconfig.in

@@ -288,74 +288,83 @@ menu "Controller debug features"
         help
             Enable controller log
 
-    config BT_LE_CONTROLLER_LOG_CTRL_ENABLED
+    config BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
-        bool "enable controller log module"
+        bool "Utilize BLE Log v2 for controller log"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+        depends on BLE_LOG_ENABLED
         default y
         help
-                Enable controller log module
+            Utilize BLE Log v2 for controller log
 
-    config BT_LE_CONTROLLER_LOG_HCI_ENABLED
+    if !BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
-        bool "enable HCI log module"
+        config BT_LE_CONTROLLER_LOG_CTRL_ENABLED
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            bool "enable controller log module"
-        default y
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        help
+            default y
-                Enable hci log module
+            help
+                    Enable controller log module
 
-    config BT_LE_CONTROLLER_LOG_DUMP_ONLY
+        config BT_LE_CONTROLLER_LOG_HCI_ENABLED
-        bool "Controller log dump mode only"
+            bool "enable HCI log module"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        default y
+            default y
-        help
+            help
-                Only operate in dump mode
+                    Enable hci log module
 
-    config BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
+        config BT_LE_CONTROLLER_LOG_DUMP_ONLY
-        bool "Output ble controller logs to SPI bus (Experimental)"
+            bool "Controller log dump mode only"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
+            default y
-        select BT_BLE_LOG_SPI_OUT_ENABLED
+            help
-        default n
+                    Only operate in dump mode
-        help
-            Output ble controller logs to SPI bus
 
-    config BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
+        config BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
-        bool "Store ble controller logs to flash(Experimental)"
+            bool "Output ble controller logs to SPI bus (Experimental)"
-        depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
-        default n
+            select BT_BLE_LOG_SPI_OUT_ENABLED
-        help
+            default n
-                Store ble controller logs to flash memory.
+            help
+                Output ble controller logs to SPI bus
 
-    config BT_LE_CONTROLLER_LOG_PARTITION_SIZE
+        config BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
-        int "size of ble controller log partition(Multiples of 4K)"
+            bool "Store ble controller logs to flash(Experimental)"
-        depends on BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
+            depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
-        default 65536
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        help
+            default n
-                The size of ble controller log partition shall be a multiples of 4K.
+            help
-                The name of log partition shall be "bt_ctrl_log".
+                    Store ble controller logs to flash memory.
-                The partition type shall be ESP_PARTITION_TYPE_DATA.
-                The partition sub_type shall be ESP_PARTITION_SUBTYPE_ANY.
 
-    config BT_LE_LOG_CTRL_BUF1_SIZE
+        config BT_LE_CONTROLLER_LOG_PARTITION_SIZE
-        int "size of the first BLE controller LOG buffer"
+            int "size of ble controller log partition(Multiples of 4K)"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
-        default 4096
+            default 65536
-        help
+            help
-                Configure the size of the first BLE controller LOG buffer.
+                    The size of ble controller log partition shall be a multiples of 4K.
+                    The name of log partition shall be "bt_ctrl_log".
+                    The partition type shall be ESP_PARTITION_TYPE_DATA.
+                    The partition sub_type shall be ESP_PARTITION_SUBTYPE_ANY.
 
-    config BT_LE_LOG_CTRL_BUF2_SIZE
+        config BT_LE_LOG_CTRL_BUF1_SIZE
-        int "size of the second BLE controller LOG buffer"
+            int "size of the first BLE controller LOG buffer"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        default 1024
+            default 4096
-        help
+            help
-                Configure the size of the second BLE controller LOG buffer.
+                    Configure the size of the first BLE controller LOG buffer.
 
-    config BT_LE_LOG_HCI_BUF_SIZE
+        config BT_LE_LOG_CTRL_BUF2_SIZE
-        int "size of the BLE HCI LOG buffer"
+            int "size of the second BLE controller LOG buffer"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        default 4096
+            default 1024
-        help
+            help
-                Configure the size of the BLE HCI LOG buffer.
+                    Configure the size of the second BLE controller LOG buffer.
+
+        config BT_LE_LOG_HCI_BUF_SIZE
+            int "size of the BLE HCI LOG buffer"
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
+            default 4096
+            help
+                    Configure the size of the BLE HCI LOG buffer.
+    endif
 
     config BT_LE_CONTROLLER_LOG_WRAP_PANIC_HANDLER_ENABLE
         bool "Enable wrap panic handler"

components/bt/controller/esp32c2/bt.c

@@ -66,9 +66,13 @@
 #include "hal/efuse_ll.h"
 #include "soc/rtc.h"
 
+#if CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
+#include "ble_log.h"
+#else /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 #if CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
 #include "ble_log/ble_log_spi_out.h"
 #endif // CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
+#endif /* CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 
 /* Macro definition
  ************************************************************************
@@ -207,12 +211,14 @@ static int esp_ecc_gen_key_pair(uint8_t *pub, uint8_t *priv);
 static int esp_ecc_gen_dh_key(const uint8_t *peer_pub_key_x, const uint8_t *peer_pub_key_y,
                               const uint8_t *our_priv_key, uint8_t *out_dhkey);
 #if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
+#if !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
 #if !CONFIG_BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
 static void esp_bt_controller_log_interface(uint32_t len, const uint8_t *addr, uint32_t len_append, const uint8_t *addr_append, uint32_t flag);
 #endif // !CONFIG_BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
 #if CONFIG_BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
 static void esp_bt_ctrl_log_partition_get_and_erase_first_block(void);
 #endif // CONFIG_BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
+#endif /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 #endif // CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
 /* Local variable definition
  ***************************************************************************
@@ -224,9 +230,43 @@ void *g_ble_lll_rfmgmt_env_p;
 static DRAM_ATTR esp_bt_controller_status_t ble_controller_status = ESP_BT_CONTROLLER_STATUS_IDLE;
 
 #if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
-const static uint32_t log_bufs_size[] = {CONFIG_BT_LE_LOG_CTRL_BUF1_SIZE, CONFIG_BT_LE_LOG_HCI_BUF_SIZE, CONFIG_BT_LE_LOG_CTRL_BUF2_SIZE};
 static bool log_is_inited = false;
 
+#if CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
+/* TODO: Remove event handler dependency in lib */
+static void void_handler(void) {}
+
+/* TODO: Declare public interfaces in a public header */
+void esp_bt_controller_log_deinit(void)
+{
+    log_is_inited = false;
+    ble_log_deinit_simple();
+    ble_log_deinit();
+}
+
+esp_err_t esp_bt_controller_log_init(void)
+{
+    if (log_is_inited) {
+        return ESP_OK;
+    }
+
+    if (!ble_log_init()) {
+        goto exit;
+    }
+
+    if (ble_log_init_simple(ble_log_write_hex_ll, void_handler) != 0) {
+        goto exit;
+    }
+
+    log_is_inited = true;
+    return ESP_OK;
+
+exit:
+    esp_bt_controller_log_deinit();
+    return ESP_FAIL;
+}
+#else /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
+const static uint32_t log_bufs_size[] = {CONFIG_BT_LE_LOG_CTRL_BUF1_SIZE, CONFIG_BT_LE_LOG_HCI_BUF_SIZE, CONFIG_BT_LE_LOG_CTRL_BUF2_SIZE};
 esp_err_t esp_bt_controller_log_init(void)
 {
     if (log_is_inited) {
@@ -289,6 +329,7 @@ void esp_bt_controller_log_deinit(void)
 
     log_is_inited = false;
 }
+#endif /* CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 
 #if CONFIG_BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
 #include "esp_partition.h"
@@ -413,6 +454,12 @@ void esp_bt_read_ctrl_log_from_flash(bool output)
 }
 #endif // CONFIG_BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
 
+#if CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
+void esp_ble_controller_log_dump_all(bool output)
+{
+    ble_log_dump_to_console();
+}
+#else /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 #if !CONFIG_BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
 static void esp_bt_controller_log_interface(uint32_t len, const uint8_t *addr, uint32_t len_append, const uint8_t *addr_append, uint32_t flag)
 {
@@ -455,6 +502,7 @@ void esp_ble_controller_log_dump_all(bool output)
     portEXIT_CRITICAL_SAFE(&spinlock);
 #endif
 }
+#endif /* CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 
 #if CONFIG_BT_LE_CONTROLLER_LOG_TASK_WDT_USER_HANDLER_ENABLE
 void esp_task_wdt_isr_user_handler(void)

components/bt/controller/esp32c3/Kconfig.in

@@ -567,41 +567,51 @@ menu "Controller debug log Options (Experimental)"
         bool "Enable BLE debug log"
         default n
 
+    config BT_CTRL_LE_LOG_MODE_BLE_LOG_V2
+        bool "Utilize BLE Log v2 for controller log"
+        depends on BT_CTRL_LE_LOG_EN
+        depends on BLE_LOG_ENABLED
+        default y
+        help
+            Utilize BLE Log v2 for controller log
+
+    if !BT_CTRL_LE_LOG_MODE_BLE_LOG_V2
+        config BT_CTRL_LE_LOG_DUMP_ONLY
+            depends on BT_CTRL_LE_LOG_EN
+            bool "Enable BLE log dump only"
+            default n
+
+        config BT_CTRL_LE_LOG_STORAGE_EN
+            depends on BT_CTRL_LE_LOG_EN
+            bool "Enable BLE log storage to flash"
+            default n
+
+        config BT_CTRL_LE_LOG_PARTITION_SIZE
+            int "The size of ble controller log partition(Multiples of 4K)"
+            depends on BT_CTRL_LE_LOG_STORAGE_EN
+            default 65536
+            help
+                The size of ble controller log partition shall be a multiples of 4K.
+                The name of log partition shall be "bt_ctrl_log".
+                The partition type shall be ESP_PARTITION_TYPE_DATA.
+                The partition sub_type shall be ESP_PARTITION_SUBTYPE_ANY.
+
+        config BT_CTRL_LE_LOG_SPI_OUT_EN
+            bool "Output ble controller logs to SPI bus"
+            depends on BT_CTRL_LE_LOG_EN
+            depends on !BT_CTRL_LE_LOG_DUMP_ONLY
+            select BT_BLE_LOG_SPI_OUT_ENABLED
+            select BT_BLE_LOG_SPI_OUT_LL_ENABLED
+            default n
+            help
+                Output ble controller logs to SPI bus
+    endif
+
     config BT_CTRL_LE_HCI_LOG_EN
         depends on BT_CTRL_LE_LOG_EN
         bool "Enable BLE HCI log"
         default n
 
-    config BT_CTRL_LE_LOG_DUMP_ONLY
-        depends on BT_CTRL_LE_LOG_EN
-        bool "Enable BLE log dump only"
-        default n
-
-    config BT_CTRL_LE_LOG_STORAGE_EN
-        depends on BT_CTRL_LE_LOG_EN
-        bool "Enable BLE log storage to flash"
-        default n
-
-    config BT_CTRL_LE_LOG_PARTITION_SIZE
-        int "The size of ble controller log partition(Multiples of 4K)"
-        depends on BT_CTRL_LE_LOG_STORAGE_EN
-        default 65536
-        help
-            The size of ble controller log partition shall be a multiples of 4K.
-            The name of log partition shall be "bt_ctrl_log".
-            The partition type shall be ESP_PARTITION_TYPE_DATA.
-            The partition sub_type shall be ESP_PARTITION_SUBTYPE_ANY.
-
-    config BT_CTRL_LE_LOG_SPI_OUT_EN
-        bool "Output ble controller logs to SPI bus"
-        depends on BT_CTRL_LE_LOG_EN
-        depends on !BT_CTRL_LE_LOG_DUMP_ONLY
-        select BT_BLE_LOG_SPI_OUT_ENABLED
-        select BT_BLE_LOG_SPI_OUT_LL_ENABLED
-        default n
-        help
-            Output ble controller logs to SPI bus
-
     config BT_CTRL_LE_LOG_MODE_EN
         depends on BT_CTRL_LE_LOG_EN
         int "Enable log for specified BLE mode"

components/bt/controller/esp32c3/bt.c

@@ -49,9 +49,13 @@
 #else //CONFIG_IDF_TARGET_ESP32S3
 #include "esp32s3/rom/rom_layout.h"
 #endif
+#if CONFIG_BLE_LOG_ENABLED
+#include "ble_log.h"
+#else /* !CONFIG_BLE_LOG_ENABLED */
 #if CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
 #include "ble_log/ble_log_spi_out.h"
 #endif // CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
+#endif /* CONFIG_BLE_LOG_ENABLED */
 #if CONFIG_BT_CTRL_LE_LOG_STORAGE_EN
 #include "esp_partition.h"
 #include "hal/wdt_hal.h"
@@ -502,10 +506,14 @@ enum log_out_mode {
     LOG_ASYNC_OUT,
     LOG_STORAGE_TO_FLASH,
     LOG_SPI_OUT,
+    LOG_BLE_LOG_V2,
 };
 
 const static uint32_t log_bufs_size[] = {CONFIG_BT_CTRL_LE_LOG_BUF1_SIZE, CONFIG_BT_CTRL_LE_LOG_HCI_BUF_SIZE, CONFIG_BT_CTRL_LE_LOG_BUF2_SIZE};
 bool log_is_inited = false;
+#if CONFIG_BT_CTRL_LE_LOG_MODE_BLE_LOG_V2
+uint8_t log_output_mode = LOG_BLE_LOG_V2;
+#else /* !CONFIG_BT_CTRL_LE_LOG_MODE_BLE_LOG_V2 */
 #if CONFIG_BT_CTRL_LE_LOG_DUMP_ONLY
 uint8_t log_output_mode = LOG_DUMP_MEMORY;
 #else
@@ -517,6 +525,7 @@ uint8_t log_output_mode = LOG_SPI_OUT;
 uint8_t log_output_mode = LOG_ASYNC_OUT;
 #endif // CONFIG_BT_CTRL_LE_LOG_STORAGE_EN
 #endif // CONFIG_BT_CTRL_LE_LOG_DUMP_ONLY
+#endif /* CONFIG_BT_CTRL_LE_LOG_MODE_BLE_LOG_V2 */
 #if CONFIG_BT_CTRL_LE_LOG_STORAGE_EN
 static const esp_partition_t *log_partition;
 static uint32_t write_index = 0;
@@ -526,6 +535,17 @@ static bool stop_write = false;
 static bool is_filled = false;
 #endif // CONFIG_BT_CTRL_LE_LOG_STORAGE_EN
 
+#if CONFIG_BT_CTRL_LE_LOG_MODE_BLE_LOG_V2
+static IRAM_ATTR void esp_bt_controller_log_interface(uint32_t len, const uint8_t *addr, bool end)
+{
+    ble_log_write_hex_ll(len, addr, 0, NULL, 0);
+}
+
+void esp_ble_controller_log_dump_all(bool output)
+{
+    ble_log_dump_to_console();
+}
+#else /* !CONFIG_BT_CTRL_LE_LOG_MODE_BLE_LOG_V2 */
 static void esp_bt_controller_log_interface(uint32_t len, const uint8_t *addr, bool end)
 {
     if (log_output_mode == LOG_STORAGE_TO_FLASH) {
@@ -570,6 +590,7 @@ void esp_ble_controller_log_dump_all(bool output)
         portEXIT_CRITICAL_SAFE(&spinlock);
     }
 }
+#endif /* CONFIG_BT_CTRL_LE_LOG_MODE_BLE_LOG_V2 */
 
 void esp_bt_log_output_mode_set(uint8_t output_mode)
 {
@@ -581,6 +602,31 @@ uint8_t esp_bt_log_output_mode_get(void)
     return log_output_mode;
 }
 
+#if CONFIG_BT_CTRL_LE_LOG_MODE_BLE_LOG_V2
+esp_err_t esp_bt_controller_log_init(uint8_t log_output_mode)
+{
+    if (log_is_inited) {
+        return ESP_OK;
+    }
+
+    esp_err_t ret = ESP_OK;
+    uint8_t buffers = 0;
+
+#if CONFIG_BT_CTRL_LE_LOG_EN
+    buffers |= ESP_BLE_LOG_BUF_CONTROLLER;
+#endif // CONFIG_BT_CTRL_LE_LOG_EN
+#if CONFIG_BT_CTRL_LE_HCI_LOG_EN
+    buffers |= ESP_BLE_LOG_BUF_HCI;
+#endif // CONFIG_BT_CTRL_LE_HCI_LOG_EN
+
+    ret = r_ble_log_init_async(esp_bt_controller_log_interface, true, buffers, (uint32_t *)log_bufs_size);
+    if (ret == ESP_OK) {
+        log_is_inited = true;
+    }
+
+    return ret;
+}
+#else /* !CONFIG_BT_CTRL_LE_LOG_MODE_BLE_LOG_V2 */
 esp_err_t esp_bt_controller_log_init(uint8_t log_output_mode)
 {
     esp_err_t ret = ESP_OK;
@@ -630,8 +676,9 @@ esp_err_t esp_bt_controller_log_init(uint8_t log_output_mode)
 
     return ret;
 }
+#endif /* CONFIG_BT_CTRL_LE_LOG_MODE_BLE_LOG_V2*/
 
-void esp_bt_ontroller_log_deinit(void)
+void esp_bt_controller_log_deinit(void)
 {
     r_ble_log_deinit_async();
     log_is_inited = false;
@@ -712,7 +759,7 @@ void esp_bt_read_ctrl_log_from_flash(bool output)
     portENTER_CRITICAL_SAFE(&spinlock);
     esp_panic_handler_feed_wdts();
     r_ble_log_async_output_dump_all(true);
-    esp_bt_ontroller_log_deinit();
+    esp_bt_controller_log_deinit();
     stop_write = true;
 
     buffer = (const uint8_t *)mapped_ptr;
@@ -1805,6 +1852,13 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
     coex_init();
 #endif
 
+#if CONFIG_BLE_LOG_ENABLED
+    if (!ble_log_init()) {
+        ESP_LOGE(BT_LOG_TAG, "BLE Log v2 init failed");
+        err = ESP_ERR_NO_MEM;
+        goto error;
+    }
+#else /* !CONFIG_BLE_LOG_ENABLED */
 #if CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
     if (ble_log_spi_out_init() != 0) {
         ESP_LOGE(BT_LOG_TAG, "BLE Log SPI output init failed");
@@ -1812,6 +1866,7 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
         goto error;
     }
 #endif // CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
+#endif /* CONFIG_BLE_LOG_ENABLED */
 
     periph_module_enable(PERIPH_BT_MODULE);
     periph_module_reset(PERIPH_BT_MODULE);
@@ -1845,9 +1900,13 @@ esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg)
 
 error:
 
+#if CONFIG_BLE_LOG_ENABLED
+    ble_log_deinit();
+#else /* !CONFIG_BLE_LOG_ENABLED */
 #if CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
     ble_log_spi_out_deinit();
 #endif // CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
+#endif /* CONFIG_BLE_LOG_ENABLED */
 
     bt_controller_deinit_internal();
 
@@ -1860,9 +1919,13 @@ esp_err_t esp_bt_controller_deinit(void)
         return ESP_ERR_INVALID_STATE;
     }
 
+#if CONFIG_BLE_LOG_ENABLED
+    ble_log_deinit();
+#else /* !CONFIG_BLE_LOG_ENABLED */
 #if CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
     ble_log_spi_out_deinit();
 #endif // CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
+#endif /* CONFIG_BLE_LOG_ENABLED */
 
 #if (CONFIG_BT_BLUEDROID_ENABLED || CONFIG_BT_NIMBLE_ENABLED)
     scan_stack_enableAdvFlowCtrlVsCmd(false);
@@ -1950,7 +2013,7 @@ static void bt_controller_deinit_internal(void)
     esp_phy_modem_deinit();
 
 #if CONFIG_BT_CTRL_LE_LOG_EN
-    esp_bt_ontroller_log_deinit();
+    esp_bt_controller_log_deinit();
 #endif // CONFIG_BT_CTRL_LE_LOG_EN
 
     if (osi_funcs_p != NULL) {

components/bt/controller/esp32c6/Kconfig.in

@@ -338,84 +338,93 @@ menu "Controller debug features"
         help
             Enable controller log
 
-    config BT_LE_CONTROLLER_LOG_CTRL_ENABLED
+    config BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
-        bool "enable controller log module"
+        bool "Utilize BLE Log v2 for controller log"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+        depends on BLE_LOG_ENABLED
         default y
         help
-            Enable controller log module
+            Utilize BLE Log v2 for controller log
 
-    config BT_LE_CONTROLLER_LOG_HCI_ENABLED
+    if !BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
-        bool "enable HCI log module"
+        config BT_LE_CONTROLLER_LOG_CTRL_ENABLED
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            bool "enable controller log module"
-        default y
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        help
+            default y
-            Enable hci log module
+            help
+                Enable controller log module
 
-    config BT_LE_CONTROLLER_LOG_DUMP_ONLY
+        config BT_LE_CONTROLLER_LOG_HCI_ENABLED
-        bool "Controller log dump mode only"
+            bool "enable HCI log module"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        default y
+            default y
-        help
+            help
-            Only operate in dump mode
+                Enable hci log module
 
-    config BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
+        config BT_LE_CONTROLLER_LOG_DUMP_ONLY
-        bool "Output ble controller logs to SPI bus (Experimental)"
+            bool "Controller log dump mode only"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
+            default y
-        select BT_BLE_LOG_SPI_OUT_ENABLED
+            help
-        default n
+                Only operate in dump mode
-        help
-            Output ble controller logs to SPI bus
 
-    config BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED
+        config BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
-        bool "Output ble controller logs via UART DMA (Experimental)"
+            bool "Output ble controller logs to SPI bus (Experimental)"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
+            depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
-        depends on !BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
+            select BT_BLE_LOG_SPI_OUT_ENABLED
-        select BT_BLE_LOG_UHCI_OUT_ENABLED
+            default n
-        default y
+            help
-        help
+                Output ble controller logs to SPI bus
-            Output ble controller logs via UART DMA
 
-    config BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
+        config BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED
-        bool "Store ble controller logs to flash(Experimental)"
+            bool "Output ble controller logs via UART DMA (Experimental)"
-        depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
-        default n
+            depends on !BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
-        help
+            select BT_BLE_LOG_UHCI_OUT_ENABLED
-            Store ble controller logs to flash memory.
+            default y
+            help
+                Output ble controller logs via UART DMA
 
-    config BT_LE_CONTROLLER_LOG_PARTITION_SIZE
+        config BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
-        int "size of ble controller log partition(Multiples of 4K)"
+            bool "Store ble controller logs to flash(Experimental)"
-        depends on BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
+            depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
-        default 65536
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        help
+            default n
-            The size of ble controller log partition shall be a multiples of 4K.
+            help
-            The name of log partition shall be "bt_ctrl_log".
+                Store ble controller logs to flash memory.
-            The partition type shall be ESP_PARTITION_TYPE_DATA.
-            The partition sub_type shall be ESP_PARTITION_SUBTYPE_ANY.
 
-    config BT_LE_LOG_CTRL_BUF1_SIZE
+        config BT_LE_CONTROLLER_LOG_PARTITION_SIZE
-        int "size of the first BLE controller LOG buffer"
+            int "size of ble controller log partition(Multiples of 4K)"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
-        default 4096
+            default 65536
-        help
+            help
-            Configure the size of the first BLE controller LOG buffer.
+                The size of ble controller log partition shall be a multiples of 4K.
+                The name of log partition shall be "bt_ctrl_log".
+                The partition type shall be ESP_PARTITION_TYPE_DATA.
+                The partition sub_type shall be ESP_PARTITION_SUBTYPE_ANY.
 
-    config BT_LE_LOG_CTRL_BUF2_SIZE
+        config BT_LE_LOG_CTRL_BUF1_SIZE
-        int "size of the second BLE controller LOG buffer"
+            int "size of the first BLE controller LOG buffer"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        default 1024
+            default 4096
-        help
+            help
-            Configure the size of the second BLE controller LOG buffer.
+                Configure the size of the first BLE controller LOG buffer.
 
-    config BT_LE_LOG_HCI_BUF_SIZE
+        config BT_LE_LOG_CTRL_BUF2_SIZE
-        int "size of the BLE HCI LOG buffer"
+            int "size of the second BLE controller LOG buffer"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        default 4096
+            default 1024
-        help
+            help
-            Configure the size of the BLE HCI LOG buffer.
+                Configure the size of the second BLE controller LOG buffer.
+
+        config BT_LE_LOG_HCI_BUF_SIZE
+            int "size of the BLE HCI LOG buffer"
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
+            default 4096
+            help
+                Configure the size of the BLE HCI LOG buffer.
+    endif
 
     config BT_LE_CONTROLLER_LOG_WRAP_PANIC_HANDLER_ENABLE
         bool "Enable wrap panic handler"

components/bt/controller/esp32c6/bt.c

@@ -63,6 +63,9 @@
 #include "soc/rtc.h"
 #include "modem/modem_syscon_struct.h"
 
+#if CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
+#include "ble_log.h"
+#else /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 #if CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
 #include "ble_log/ble_log_spi_out.h"
 #endif // CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
@@ -70,6 +73,7 @@
 #if CONFIG_BT_BLE_LOG_UHCI_OUT_ENABLED
 #include "ble_log/ble_log_uhci_out.h"
 #endif // CONFIG_BT_BLE_LOG_UHCI_OUT_ENABLED
+#endif /* CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 
 /* Macro definition
  ************************************************************************
@@ -211,12 +215,14 @@ static int esp_ecc_gen_key_pair(uint8_t *pub, uint8_t *priv);
 static int esp_ecc_gen_dh_key(const uint8_t *peer_pub_key_x, const uint8_t *peer_pub_key_y,
                               const uint8_t *our_priv_key, uint8_t *out_dhkey);
 #if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
+#if !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
 #if !CONFIG_BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED && !CONFIG_BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED
 static void esp_bt_controller_log_interface(uint32_t len, const uint8_t *addr, uint32_t len_append, const uint8_t *addr_append, uint32_t flag);
 #endif // !CONFIG_BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED && !CONFIG_BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED
 #if CONFIG_BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
 static void esp_bt_ctrl_log_partition_get_and_erase_first_block(void);
 #endif // CONFIG_BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
+#endif /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 #endif // CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
 /* Local variable definition
  ***************************************************************************
@@ -225,9 +231,47 @@ static void esp_bt_ctrl_log_partition_get_and_erase_first_block(void);
 static DRAM_ATTR esp_bt_controller_status_t ble_controller_status = ESP_BT_CONTROLLER_STATUS_IDLE;
 
 #if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
-const static uint32_t log_bufs_size[] = {CONFIG_BT_LE_LOG_CTRL_BUF1_SIZE, CONFIG_BT_LE_LOG_HCI_BUF_SIZE, CONFIG_BT_LE_LOG_CTRL_BUF2_SIZE};
 static bool log_is_inited = false;
 
+#if CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
+/* TODO: Remove event handler dependency in lib */
+static void void_handler(void) {}
+
+/* TODO: Declare public interfaces in a public header */
+void esp_bt_controller_log_deinit(void)
+{
+    log_is_inited = false;
+    r_ble_log_deinit_simple();
+    ble_log_deinit();
+}
+
+esp_err_t esp_bt_controller_log_init(void)
+{
+    if (log_is_inited) {
+        return ESP_OK;
+    }
+
+    if (!ble_log_init()) {
+        goto exit;
+    }
+
+    if (r_ble_log_init_simple(ble_log_write_hex_ll, void_handler) != 0) {
+        goto exit;
+    }
+
+    if (r_ble_log_ctrl_level_and_mod(CONFIG_BT_LE_CONTROLLER_LOG_OUTPUT_LEVEL,
+                                     CONFIG_BT_LE_CONTROLLER_LOG_MOD_OUTPUT_SWITCH) != ESP_OK) {
+        goto exit;
+    }
+    log_is_inited = true;
+    return ESP_OK;
+
+exit:
+    esp_bt_controller_log_deinit();
+    return ESP_FAIL;
+}
+#else /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
+const static uint32_t log_bufs_size[] = {CONFIG_BT_LE_LOG_CTRL_BUF1_SIZE, CONFIG_BT_LE_LOG_HCI_BUF_SIZE, CONFIG_BT_LE_LOG_CTRL_BUF2_SIZE};
 esp_err_t esp_bt_controller_log_init(void)
 {
     if (log_is_inited) {
@@ -321,6 +365,7 @@ void esp_bt_controller_log_deinit(void)
 
     log_is_inited = false;
 }
+#endif /* CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 
 #if CONFIG_BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
 #include "esp_partition.h"
@@ -1518,6 +1563,12 @@ esp_power_level_t esp_ble_tx_power_get_enhanced(esp_ble_enhanced_power_type_t po
 }
 
 #if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
+#if CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
+void esp_ble_controller_log_dump_all(bool output)
+{
+    ble_log_dump_to_console();
+}
+#else /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 #if !CONFIG_BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED && !CONFIG_BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED
 static void esp_bt_controller_log_interface(uint32_t len, const uint8_t *addr, uint32_t len_append, const uint8_t *addr_append, uint32_t flag)
 {
@@ -1564,6 +1615,7 @@ void esp_ble_controller_log_dump_all(bool output)
     portEXIT_CRITICAL_SAFE(&spinlock);
 #endif
 }
+#endif /* CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 #endif // CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
 
 #if (!CONFIG_BT_NIMBLE_ENABLED) && (CONFIG_BT_CONTROLLER_ENABLED)

components/bt/controller/esp32h2/Kconfig.in

@@ -332,84 +332,93 @@ menu "Controller debug features"
         help
             Enable controller log
 
-    config BT_LE_CONTROLLER_LOG_CTRL_ENABLED
+    config BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
-        bool "enable controller log module"
+        bool "Utilize BLE Log v2 for controller log"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+        depends on BLE_LOG_ENABLED
         default y
         help
-            Enable controller log module
+            Utilize BLE Log v2 for controller log
 
-    config BT_LE_CONTROLLER_LOG_HCI_ENABLED
+    if !BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
-        bool "enable HCI log module"
+        config BT_LE_CONTROLLER_LOG_CTRL_ENABLED
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            bool "enable controller log module"
-        default y
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        help
+            default y
-            Enable hci log module
+            help
+                Enable controller log module
 
-    config BT_LE_CONTROLLER_LOG_DUMP_ONLY
+        config BT_LE_CONTROLLER_LOG_HCI_ENABLED
-        bool "Controller log dump mode only"
+            bool "enable HCI log module"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        default y
+            default y
-        help
+            help
-            Only operate in dump mode
+                Enable hci log module
 
-    config BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
+        config BT_LE_CONTROLLER_LOG_DUMP_ONLY
-        bool "Output ble controller logs to SPI bus (Experimental)"
+            bool "Controller log dump mode only"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
+            default y
-        select BT_BLE_LOG_SPI_OUT_ENABLED
+            help
-        default n
+                Only operate in dump mode
-        help
-            Output ble controller logs to SPI bus
 
-    config BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED
+        config BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
-        bool "Output ble controller logs via UART DMA (Experimental)"
+            bool "Output ble controller logs to SPI bus (Experimental)"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
+            depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
-        depends on !BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
+            select BT_BLE_LOG_SPI_OUT_ENABLED
-        select BT_BLE_LOG_UHCI_OUT_ENABLED
+            default n
-        default y
+            help
-        help
+                Output ble controller logs to SPI bus
-            Output ble controller logs via UART DMA
 
-    config BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
+        config BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED
-        bool "Store ble controller logs to flash(Experimental)"
+            bool "Output ble controller logs via UART DMA (Experimental)"
-        depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
-        default n
+            depends on !BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED
-        help
+            select BT_BLE_LOG_UHCI_OUT_ENABLED
-            Store ble controller logs to flash memory.
+            default y
+            help
+                Output ble controller logs via UART DMA
 
-    config BT_LE_CONTROLLER_LOG_PARTITION_SIZE
+        config BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
-        int "size of ble controller log partition(Multiples of 4K)"
+            bool "Store ble controller logs to flash(Experimental)"
-        depends on BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
+            depends on !BT_LE_CONTROLLER_LOG_DUMP_ONLY
-        default 65536
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        help
+            default n
-            The size of ble controller log partition shall be a multiples of 4K.
+            help
-            The name of log partition shall be "bt_ctrl_log".
+                Store ble controller logs to flash memory.
-            The partition type shall be ESP_PARTITION_TYPE_DATA.
-            The partition sub_type shall be ESP_PARTITION_SUBTYPE_ANY.
 
-    config BT_LE_LOG_CTRL_BUF1_SIZE
+        config BT_LE_CONTROLLER_LOG_PARTITION_SIZE
-        int "size of the first BLE controller LOG buffer"
+            int "size of ble controller log partition(Multiples of 4K)"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
-        default 4096
+            default 65536
-        help
+            help
-            Configure the size of the first BLE controller LOG buffer.
+                The size of ble controller log partition shall be a multiples of 4K.
+                The name of log partition shall be "bt_ctrl_log".
+                The partition type shall be ESP_PARTITION_TYPE_DATA.
+                The partition sub_type shall be ESP_PARTITION_SUBTYPE_ANY.
 
-    config BT_LE_LOG_CTRL_BUF2_SIZE
+        config BT_LE_LOG_CTRL_BUF1_SIZE
-        int "size of the second BLE controller LOG buffer"
+            int "size of the first BLE controller LOG buffer"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        default 1024
+            default 4096
-        help
+            help
-            Configure the size of the second BLE controller LOG buffer.
+                Configure the size of the first BLE controller LOG buffer.
 
-    config BT_LE_LOG_HCI_BUF_SIZE
+        config BT_LE_LOG_CTRL_BUF2_SIZE
-        int "size of the BLE HCI LOG buffer"
+            int "size of the second BLE controller LOG buffer"
-        depends on BT_LE_CONTROLLER_LOG_ENABLED
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
-        default 4096
+            default 1024
-        help
+            help
-            Configure the size of the BLE HCI LOG buffer.
+                Configure the size of the second BLE controller LOG buffer.
+
+        config BT_LE_LOG_HCI_BUF_SIZE
+            int "size of the BLE HCI LOG buffer"
+            depends on BT_LE_CONTROLLER_LOG_ENABLED
+            default 4096
+            help
+                Configure the size of the BLE HCI LOG buffer.
+    endif
 
     config BT_LE_CONTROLLER_LOG_WRAP_PANIC_HANDLER_ENABLE
         bool "Enable wrap panic handler"

components/bt/controller/esp32h2/bt.c

@@ -55,6 +55,9 @@
 #include "esp_sleep.h"
 #include "soc/rtc.h"
 
+#if CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
+#include "ble_log.h"
+#else /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 #if CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
 #include "ble_log/ble_log_spi_out.h"
 #endif // CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED
@@ -62,6 +65,7 @@
 #if CONFIG_BT_BLE_LOG_UHCI_OUT_ENABLED
 #include "ble_log/ble_log_uhci_out.h"
 #endif // CONFIG_BT_BLE_LOG_UHCI_OUT_ENABLED
+#endif /* CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 
 /* Macro definition
  ************************************************************************
@@ -194,12 +198,14 @@ static int esp_ecc_gen_key_pair(uint8_t *pub, uint8_t *priv);
 static int esp_ecc_gen_dh_key(const uint8_t *peer_pub_key_x, const uint8_t *peer_pub_key_y,
                               const uint8_t *our_priv_key, uint8_t *out_dhkey);
 #if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
+#if !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
 #if !CONFIG_BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED && !CONFIG_BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED
 static void esp_bt_controller_log_interface(uint32_t len, const uint8_t *addr, uint32_t len_append, const uint8_t *addr_append, uint32_t flag);
 #endif // !CONFIG_BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED && !CONFIG_BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED
 #if CONFIG_BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
 static void esp_bt_ctrl_log_partition_get_and_erase_first_block(void);
 #endif // CONFIG_BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
+#endif /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 #endif // CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
 /* Local variable definition
  ***************************************************************************
@@ -208,9 +214,47 @@ static void esp_bt_ctrl_log_partition_get_and_erase_first_block(void);
 static DRAM_ATTR esp_bt_controller_status_t ble_controller_status = ESP_BT_CONTROLLER_STATUS_IDLE;
 
 #if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
-const static uint32_t log_bufs_size[] = {CONFIG_BT_LE_LOG_CTRL_BUF1_SIZE, CONFIG_BT_LE_LOG_HCI_BUF_SIZE, CONFIG_BT_LE_LOG_CTRL_BUF2_SIZE};
 static bool log_is_inited = false;
 
+#if CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
+/* TODO: Remove event handler dependency in lib */
+static void void_handler(void) {}
+
+/* TODO: Declare public interfaces in a public header */
+void esp_bt_controller_log_deinit(void)
+{
+    log_is_inited = false;
+    r_ble_log_deinit_simple();
+    ble_log_deinit();
+}
+
+esp_err_t esp_bt_controller_log_init(void)
+{
+    if (log_is_inited) {
+        return ESP_OK;
+    }
+
+    if (!ble_log_init()) {
+        goto exit;
+    }
+
+    if (r_ble_log_init_simple(ble_log_write_hex_ll, void_handler) != 0) {
+        goto exit;
+    }
+
+    if (r_ble_log_ctrl_level_and_mod(CONFIG_BT_LE_CONTROLLER_LOG_OUTPUT_LEVEL,
+                                     CONFIG_BT_LE_CONTROLLER_LOG_MOD_OUTPUT_SWITCH) != ESP_OK) {
+        goto exit;
+    }
+    log_is_inited = true;
+    return ESP_OK;
+
+exit:
+    esp_bt_controller_log_deinit();
+    return ESP_FAIL;
+}
+#else /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
+const static uint32_t log_bufs_size[] = {CONFIG_BT_LE_LOG_CTRL_BUF1_SIZE, CONFIG_BT_LE_LOG_HCI_BUF_SIZE, CONFIG_BT_LE_LOG_CTRL_BUF2_SIZE};
 esp_err_t esp_bt_controller_log_init(void)
 {
     if (log_is_inited) {
@@ -304,6 +348,7 @@ void esp_bt_controller_log_deinit(void)
 
     log_is_inited = false;
 }
+#endif /* CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 
 #if CONFIG_BT_LE_CONTROLLER_LOG_STORAGE_ENABLE
 #include "esp_partition.h"
@@ -1442,6 +1487,12 @@ esp_power_level_t esp_ble_tx_power_get_enhanced(esp_ble_enhanced_power_type_t po
 }
 
 #if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
+#if CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2
+void esp_ble_controller_log_dump_all(bool output)
+{
+    ble_log_dump_to_console();
+}
+#else /* !CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 #if !CONFIG_BT_LE_CONTROLLER_LOG_SPI_OUT_ENABLED && !CONFIG_BT_LE_CONTROLLER_LOG_UHCI_OUT_ENABLED
 static void esp_bt_controller_log_interface(uint32_t len, const uint8_t *addr, uint32_t len_append, const uint8_t *addr_append, uint32_t flag)
 {
@@ -1488,6 +1539,7 @@ void esp_ble_controller_log_dump_all(bool output)
     portEXIT_CRITICAL_SAFE(&spinlock);
 #endif
 }
+#endif /* CONFIG_BT_LE_CONTROLLER_LOG_MODE_BLE_LOG_V2 */
 #endif // CONFIG_BT_LE_CONTROLLER_LOG_ENABLED
 
 #if (!CONFIG_BT_NIMBLE_ENABLED) && (CONFIG_BT_CONTROLLER_ENABLED)