ci: temporarily disable s3 build for a few examples

examples/bluetooth/hci/controller_hci_uart_esp32c3/README.md

@@ -1,7 +1,8 @@
+| Supported Targets | ESP32-C3 |
+| ----------------- | -------- |
+
 ESP-IDF UART HCI Controller
 =================================
-| Supported Targets | ESP32-C3 | ESP32-S3 |
-| ----------------- | -------- | -------- |
 
 This example demonstrates how to configure the Bluetooth Low Energy Controller's HCI (Host Controller Interface) to communicate over UART.
 

examples/ethernet/basic/README.md

@@ -1,3 +1,6 @@
+| Supported Targets | ESP32 | ESP32-S2 | ESP32-C3 |
+| ----------------- | ----- | -------- | -------- |
+
 # Ethernet Example
 (See the README.md file in the upper level 'examples' directory for more information about examples.)
 

examples/ethernet/eth2ap/README.md

@@ -1,3 +1,6 @@
+| Supported Targets | ESP32 | ESP32-S2 | ESP32-C3 |
+| ----------------- | ----- | -------- | -------- |
+
 # eth2ap Example
 (See the README.md file in the upper level 'examples' directory for more information about examples. To try a more complex application about Ethernet to WiFi data forwarding, please go to [iot-solution](https://github.com/espressif/esp-iot-solution/tree/release/v1.0/examples/eth2wifi).)
 

examples/ethernet/iperf/README.md

@@ -1,3 +1,6 @@
+| Supported Targets | ESP32 | ESP32-S2 | ESP32-C3 |
+| ----------------- | ----- | -------- | -------- |
+
 # Ethernet iperf Example
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/peripherals/spi_master/lcd/README.md

@@ -1,3 +1,6 @@
+| Supported Targets | ESP32 | ESP32-S2 | ESP32-C3 |
+| ----------------- | ----- | -------- | -------- |
+
 # SPI Host Driver Example
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/protocols/http_server/file_serving/README.md

@@ -1,3 +1,6 @@
+| Supported Targets | ESP32 | ESP32-S2 | ESP32-C3 |
+| ----------------- | ----- | -------- | -------- |
+
 # Simple HTTP File Server Example
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/provisioning/wifi_prov_mgr/README.md

@@ -1,3 +1,6 @@
+| Supported Targets | ESP32 | ESP32-S2 | ESP32-C3 |
+| ----------------- | ----- | -------- | -------- |
+
 # Wi-Fi Provisioning Manager Example
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/storage/sd_card/sdspi/README.md

@@ -1,3 +1,6 @@
+| Supported Targets | ESP32 | ESP32-S2 | ESP32-C3 |
+| ----------------- | ----- | -------- | -------- |
+
 # SD Card example (SDSPI)
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)
@@ -118,4 +121,4 @@ An attempt to download a new firmware under this conditions may also result in t
 to clean your board's flash, then download your firmware properly.
 
 
-  
+  

examples/system/ota/advanced_https_ota/README.md

@@ -1,3 +1,6 @@
+| Supported Targets | ESP32 | ESP32-S2 | ESP32-C3 |
+| ----------------- | ----- | -------- | -------- |
+
 # Advanced HTTPS OTA example
 
 This example is based on `esp_https_ota` component's APIs.