espressif/esp-idf
1
0
Fork 1
mirror of https://github.com/espressif/esp-idf.git synced 2025-07-30 18:57:19 +02:00
Code Issues Packages Projects Releases Wiki Activity

spi: fix duplex mode switch issue for multi devices

Browse Source
This commit is contained in:
Armando
2020-11-13 17:03:15 +08:00
parent 474224d668
commit 929632739a
1 changed files with 7 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

16
components/driver/spi_master.c
View File

@ -344,14 +344,9 @@ esp_err_t spi_bus_add_device(spi_host_device_t host_id, const spi_device_interfa
int freq; int freq;
spi_hal_context_t *hal = &(host->hal); spi_hal_context_t *hal = &(host->hal);
hal->half_duplex = dev_config->flags & SPI_DEVICE_HALFDUPLEX ? 1 : 0; hal->half_duplex = dev_config->flags & SPI_DEVICE_HALFDUPLEX ? 1 : 0;
#ifdef SOC_SPI_SUPPORT_AS_CS
hal->as_cs = dev_config->flags & SPI_DEVICE_CLK_AS_CS ? 1 : 0;
#endif
hal->positive_cs = dev_config->flags & SPI_DEVICE_POSITIVE_CS ? 1 : 0;
hal->no_compensate = dev_config->flags & SPI_DEVICE_NO_DUMMY ? 1 : 0; hal->no_compensate = dev_config->flags & SPI_DEVICE_NO_DUMMY ? 1 : 0;
spi_hal_timing_conf_t temp_timing_conf; spi_hal_timing_conf_t temp_timing_conf;
esp_err_t ret = spi_hal_get_clock_conf(hal, dev_config->clock_speed_hz, duty_cycle, esp_err_t ret = spi_hal_get_clock_conf(hal, dev_config->clock_speed_hz, duty_cycle,
!(bus_attr->flags & SPICOMMON_BUSFLAG_IOMUX_PINS), !(bus_attr->flags & SPICOMMON_BUSFLAG_IOMUX_PINS),
dev_config->input_delay_ns, &freq, dev_config->input_delay_ns, &freq,
@ -453,16 +448,20 @@ static SPI_MASTER_ISR_ATTR void spi_setup_device(spi_device_t *dev)
hal->mode = dev->cfg.mode; hal->mode = dev->cfg.mode;
hal->tx_lsbfirst = dev->cfg.flags & SPI_DEVICE_TXBIT_LSBFIRST ? 1 : 0; hal->tx_lsbfirst = dev->cfg.flags & SPI_DEVICE_TXBIT_LSBFIRST ? 1 : 0;
hal->rx_lsbfirst = dev->cfg.flags & SPI_DEVICE_RXBIT_LSBFIRST ? 1 : 0; hal->rx_lsbfirst = dev->cfg.flags & SPI_DEVICE_RXBIT_LSBFIRST ? 1 : 0;
hal->no_compensate = dev->cfg.flags & SPI_DEVICE_NO_DUMMY ? 1 : 0;
hal->sio = dev->cfg.flags & SPI_DEVICE_3WIRE ? 1 : 0; hal->sio = dev->cfg.flags & SPI_DEVICE_3WIRE ? 1 : 0;
hal->dummy_bits = dev->cfg.dummy_bits;
hal->cs_setup = dev->cfg.cs_ena_pretrans; hal->cs_setup = dev->cfg.cs_ena_pretrans;
hal->cs_hold =dev->cfg.cs_ena_posttrans; hal->cs_hold = dev->cfg.cs_ena_posttrans;
//set hold_time to 0 will not actually append delay to CS //set hold_time to 0 will not actually append delay to CS
//set it to 1 since we do need at least one clock of hold time in most cases //set it to 1 since we do need at least one clock of hold time in most cases
if (hal->cs_hold == 0) hal->cs_hold = 1; if (hal->cs_hold == 0) hal->cs_hold = 1;
hal->cs_pin_id = dev->id; hal->cs_pin_id = dev->id;
hal->timing_conf = &dev->timing_conf; hal->timing_conf = &dev->timing_conf;
hal->half_duplex = dev->cfg.flags & SPI_DEVICE_HALFDUPLEX ? 1 : 0;
#ifdef SOC_SPI_SUPPORT_AS_CS
hal->as_cs = dev->cfg.flags & SPI_DEVICE_CLK_AS_CS ? 1 : 0;
#endif
hal->positive_cs = dev->cfg.flags & SPI_DEVICE_POSITIVE_CS ? 1 : 0;
hal->no_compensate = dev->cfg.flags & SPI_DEVICE_NO_DUMMY ? 1 : 0;
spi_hal_setup_device(hal); spi_hal_setup_device(hal);
} }
@ -517,7 +516,6 @@ static void SPI_MASTER_ISR_ATTR spi_new_trans(spi_device_t *dev, spi_trans_priv_
hal->rx_bitlen = trans->rxlength; hal->rx_bitlen = trans->rxlength;
hal->rcv_buffer = (uint8_t*)host->cur_trans_buf.buffer_to_rcv; hal->rcv_buffer = (uint8_t*)host->cur_trans_buf.buffer_to_rcv;
hal->send_buffer = (uint8_t*)host->cur_trans_buf.buffer_to_send; hal->send_buffer = (uint8_t*)host->cur_trans_buf.buffer_to_send;
hal->half_duplex = dev->cfg.flags & SPI_DEVICE_HALFDUPLEX ? 1 : 0;
hal->cmd = trans->cmd; hal->cmd = trans->cmd;
hal->addr = trans->addr; hal->addr = trans->addr;
//Set up QIO/DIO if needed //Set up QIO/DIO if needed