Merge branch 'feat/support_rmt_on_h21' into 'master'

feat(rmt): support rmt on esp32h21

Closes IDF-11622 and IDF-11623

See merge request espressif/esp-idf!40859

components/driver/test_apps/legacy_rmt_driver/README.md

@@ -1,2 +1,2 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |

components/esp_driver_rmt/test_apps/rmt/README.md

@@ -1,2 +1,2 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |

components/hal/esp32h21/include/hal/rmt_ll.h

@@ -0,0 +1,907 @@
+/*
+ * SPDX-FileCopyrightText: 2025 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+/**
+ * @note TX and RX channels are index from 0 in the LL driver, i.e. tx_channel = [0,1], rx_channel = [0,1]
+ */
+
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include "hal/misc.h"
+#include "hal/assert.h"
+#include "hal/rmt_types.h"
+#include "soc/rmt_struct.h"
+#include "soc/pcr_struct.h"
+#include "soc/retention_periph_defs.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define RMT_LL_EVENT_TX_DONE(channel)     (1 << (channel))
+#define RMT_LL_EVENT_TX_THRES(channel)    (1 << ((channel) + 8))
+#define RMT_LL_EVENT_TX_LOOP_END(channel) (1 << ((channel) + 12))
+#define RMT_LL_EVENT_TX_ERROR(channel)    (1 << ((channel) + 4))
+#define RMT_LL_EVENT_RX_DONE(channel)     (1 << ((channel) + 2))
+#define RMT_LL_EVENT_RX_THRES(channel)    (1 << ((channel) + 10))
+#define RMT_LL_EVENT_RX_ERROR(channel)    (1 << ((channel) + 6))
+#define RMT_LL_EVENT_TX_MASK(channel)     (RMT_LL_EVENT_TX_DONE(channel) | RMT_LL_EVENT_TX_THRES(channel) | RMT_LL_EVENT_TX_LOOP_END(channel))
+#define RMT_LL_EVENT_RX_MASK(channel)     (RMT_LL_EVENT_RX_DONE(channel) | RMT_LL_EVENT_RX_THRES(channel))
+
+#define RMT_LL_MAX_LOOP_COUNT_PER_BATCH   1023
+#define RMT_LL_MAX_FILTER_VALUE           255
+#define RMT_LL_MAX_IDLE_VALUE             32767
+
+// Maximum values due to limited register bit width
+#define RMT_LL_CHANNEL_CLOCK_MAX_PRESCALE 256
+#define RMT_LL_GROUP_CLOCK_MAX_INTEGER_PRESCALE 256
+#define RMT_LL_GROUP_CLOCK_MAX_FRACTAL_PRESCALE 64
+
+typedef enum {
+    RMT_LL_MEM_OWNER_SW = 0,
+    RMT_LL_MEM_OWNER_HW = 1,
+} rmt_ll_mem_owner_t;
+
+typedef enum {
+    RMT_LL_MEM_LP_MODE_SHUT_DOWN,   // power down memory during low power stage
+} rmt_ll_mem_lp_mode_t;
+
+/**
+ * @brief Enable the bus clock for RMT module
+ *
+ * @param group_id Group ID
+ * @param enable true to enable, false to disable
+ */
+static inline void rmt_ll_enable_bus_clock(int group_id, bool enable)
+{
+    (void)group_id;
+    PCR.rmt_conf.rmt_clk_en = enable;
+}
+
+/**
+ * @brief Reset the RMT module
+ *
+ * @param group_id Group ID
+ */
+static inline void rmt_ll_reset_register(int group_id)
+{
+    (void)group_id;
+    PCR.rmt_conf.rmt_rst_en = 1;
+    PCR.rmt_conf.rmt_rst_en = 0;
+}
+
+/**
+ * @brief Force power on the RMT memory block, regardless of the outside PMU logic
+ *
+ * @param dev Peripheral instance address
+ */
+static inline void rmt_ll_mem_force_power_on(rmt_dev_t *dev)
+{
+    dev->sys_conf.rmt_mem_force_pu = 1;
+    dev->sys_conf.rmt_mem_force_pd = 0;
+}
+
+/**
+ * @brief Force the RMT memory block into low power mode, regardless of the outside PMU logic
+ *
+ * @param dev Peripheral instance address
+ */
+static inline void rmt_ll_mem_force_low_power(rmt_dev_t *dev)
+{
+    dev->sys_conf.rmt_mem_force_pd = 1;
+    dev->sys_conf.rmt_mem_force_pu = 0;
+}
+
+/**
+ * @brief Power control the RMT memory block by the outside PMU logic
+ *
+ * @param dev Peripheral instance address
+ */
+static inline void rmt_ll_mem_power_by_pmu(rmt_dev_t *dev)
+{
+    dev->sys_conf.rmt_mem_force_pd = 0;
+    dev->sys_conf.rmt_mem_force_pu = 0;
+}
+
+/**
+ * @brief Set low power mode for RMT memory block
+ *
+ * @param dev Peripheral instance address
+ * @param mode RMT memory low power mode in low power stage
+ */
+static inline void rmt_ll_mem_set_low_power_mode(rmt_dev_t *dev, rmt_ll_mem_lp_mode_t mode)
+{
+    (void)dev;
+    HAL_ASSERT(mode == RMT_LL_MEM_LP_MODE_SHUT_DOWN);
+}
+
+/**
+ * @brief Enable APB accessing RMT memory in nonfifo mode
+ *
+ * @param dev Peripheral instance address
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_enable_mem_access_nonfifo(rmt_dev_t *dev, bool enable)
+{
+    dev->sys_conf.apb_fifo_mask = enable;
+}
+
+/**
+ * @brief Set clock source and divider for RMT channel group
+ *
+ * @param dev Peripheral instance address
+ * @param channel not used as clock source is set for all channels
+ * @param src Clock source
+ * @param divider_integral Integral part of the divider
+ * @param divider_denominator Denominator part of the divider
+ * @param divider_numerator Numerator part of the divider
+ */
+static inline void rmt_ll_set_group_clock_src(rmt_dev_t *dev, uint32_t channel, rmt_clock_source_t src,
+                                              uint32_t divider_integral, uint32_t divider_denominator, uint32_t divider_numerator)
+{
+    // Formula: rmt_sclk = module_clock_src / (1 + div_num + div_a / div_b)
+    (void)channel; // the source clock is set for all channels
+    HAL_ASSERT(divider_integral >= 1);
+    HAL_FORCE_MODIFY_U32_REG_FIELD(PCR.rmt_sclk_conf, rmt_sclk_div_num, divider_integral - 1);
+    PCR.rmt_sclk_conf.rmt_sclk_div_a = divider_numerator;
+    PCR.rmt_sclk_conf.rmt_sclk_div_b = divider_denominator;
+    switch (src) {
+    case RMT_CLK_SRC_XTAL:
+        PCR.rmt_sclk_conf.rmt_sclk_sel = 0;
+        break;
+    case RMT_CLK_SRC_RC_FAST:
+        PCR.rmt_sclk_conf.rmt_sclk_sel = 1;
+        break;
+    default:
+        HAL_ASSERT(false);
+        break;
+    }
+}
+
+/**
+ * @brief Enable RMT peripheral source clock
+ *
+ * @param dev Peripheral instance address
+ * @param en True to enable, False to disable
+ */
+static inline void rmt_ll_enable_group_clock(rmt_dev_t *dev, bool en)
+{
+    (void)dev;
+    PCR.rmt_sclk_conf.rmt_sclk_en = en;
+}
+
+////////////////////////////////////////TX Channel Specific/////////////////////////////////////////////////////////////
+
+/**
+ * @brief Reset clock divider for TX channels by mask
+ *
+ * @param dev Peripheral instance address
+ * @param channel_mask Mask of TX channels
+ */
+static inline void rmt_ll_tx_reset_channels_clock_div(rmt_dev_t *dev, uint32_t channel_mask)
+{
+    // write 1 to reset
+    dev->ref_cnt_rst.val |= channel_mask & 0x03;
+}
+
+/**
+ * @brief Set TX channel clock divider
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param div Division value
+ */
+static inline void rmt_ll_tx_set_channel_clock_div(rmt_dev_t *dev, uint32_t channel, uint32_t div)
+{
+    HAL_ASSERT(div >= 1 && div <= 256 && "divider out of range");
+    // limit the maximum divider to 256
+    if (div >= 256) {
+        div = 0; // 0 means 256 division
+    }
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chnconf0[channel], div_cnt_chn, div);
+}
+
+/**
+ * @brief Reset RMT reading pointer for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_reset_pointer(rmt_dev_t *dev, uint32_t channel)
+{
+    dev->chnconf0[channel].mem_rd_rst_chn = 1;
+    dev->chnconf0[channel].mem_rd_rst_chn = 0;
+    dev->chnconf0[channel].apb_mem_rst_chn = 1;
+    dev->chnconf0[channel].apb_mem_rst_chn = 0;
+}
+
+/**
+ * @brief Start transmitting for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_start(rmt_dev_t *dev, uint32_t channel)
+{
+    // update other configuration registers before start transmitting
+    dev->chnconf0[channel].conf_update_chn = 1;
+    dev->chnconf0[channel].tx_start_chn = 1;
+}
+
+/**
+ * @brief Stop transmitting for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_stop(rmt_dev_t *dev, uint32_t channel)
+{
+    dev->chnconf0[channel].tx_stop_chn = 1;
+    // stop won't take place until configurations updated
+    dev->chnconf0[channel].conf_update_chn = 1;
+}
+
+/**
+ * @brief Set memory block number for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param block_num memory block number
+ */
+static inline void rmt_ll_tx_set_mem_blocks(rmt_dev_t *dev, uint32_t channel, uint8_t block_num)
+{
+    dev->chnconf0[channel].mem_size_chn = block_num;
+}
+
+/**
+ * @brief Enable TX wrap
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_tx_enable_wrap(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chnconf0[channel].mem_tx_wrap_en_chn = enable;
+}
+
+/**
+ * @brief Enable transmitting in a loop
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_enable_loop(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chnconf0[channel].tx_conti_mode_chn = enable;
+}
+
+/**
+ * @brief Set loop count for TX channel
+ *
+ * @param dev  Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param count TX loop count
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_set_loop_count(rmt_dev_t *dev, uint32_t channel, uint32_t count)
+{
+    HAL_ASSERT(count <= RMT_LL_MAX_LOOP_COUNT_PER_BATCH && "loop count out of range");
+    dev->chn_tx_lim[channel].tx_loop_num_chn = count;
+}
+
+/**
+ * @brief Reset loop count for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_reset_loop_count(rmt_dev_t *dev, uint32_t channel)
+{
+    dev->chn_tx_lim[channel].loop_count_reset_chn = 1;
+    dev->chn_tx_lim[channel].loop_count_reset_chn = 0;
+}
+
+/**
+ * @brief Enable loop count for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_enable_loop_count(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chn_tx_lim[channel].tx_loop_cnt_en_chn = enable;
+}
+
+/**
+ * @brief Enable loop stop at count value automatically
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_enable_loop_autostop(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chn_tx_lim[channel].loop_stop_en_chn = enable;
+}
+
+/**
+ * @brief Enable transmit multiple channels synchronously
+ *
+ * @param dev Peripheral instance address
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_tx_enable_sync(rmt_dev_t *dev, bool enable)
+{
+    dev->tx_sim.tx_sim_en = enable;
+}
+
+/**
+ * @brief Clear the TX channels synchronous group
+ *
+ * @param dev Peripheral instance address
+ */
+static inline void rmt_ll_tx_clear_sync_group(rmt_dev_t *dev)
+{
+    dev->tx_sim.val &= ~(0x03);
+}
+
+/**
+ * @brief Add TX channels to the synchronous group
+ *
+ * @param dev Peripheral instance address
+ * @param channel_mask Mask of TX channels to be added to the synchronous group
+ */
+static inline void rmt_ll_tx_sync_group_add_channels(rmt_dev_t *dev, uint32_t channel_mask)
+{
+    dev->tx_sim.val |= (channel_mask & 0x03);
+}
+
+/**
+ * @brief Remove TX channels from the synchronous group
+ *
+ * @param dev Peripheral instance address
+ * @param channel_mask Mask of TX channels to be removed from the synchronous group
+ */
+static inline void rmt_ll_tx_sync_group_remove_channels(rmt_dev_t *dev, uint32_t channel_mask)
+{
+    dev->tx_sim.val &= ~channel_mask;
+}
+
+/**
+ * @brief Fix the output level when TX channel is in IDLE state
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param level IDLE level (1 => high, 0 => low)
+ * @param enable True to fix the IDLE level, otherwise the IDLE level is determined by EOF encoder
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_tx_fix_idle_level(rmt_dev_t *dev, uint32_t channel, uint8_t level, bool enable)
+{
+    dev->chnconf0[channel].idle_out_en_chn = enable;
+    dev->chnconf0[channel].idle_out_lv_chn = level;
+}
+
+/**
+ * @brief Set the amount of RMT symbols that can trigger the limitation interrupt
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param limit Specify the number of symbols
+ */
+static inline void rmt_ll_tx_set_limit(rmt_dev_t *dev, uint32_t channel, uint32_t limit)
+{
+    dev->chn_tx_lim[channel].tx_lim_chn = limit;
+}
+
+/**
+ * @brief Set high and low duration of carrier signal
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param high_ticks Duration of high level
+ * @param low_ticks Duration of low level
+ */
+static inline void rmt_ll_tx_set_carrier_high_low_ticks(rmt_dev_t *dev, uint32_t channel, uint32_t high_ticks, uint32_t low_ticks)
+{
+    HAL_ASSERT(high_ticks >= 1 && high_ticks <= 65536 && low_ticks >= 1 && low_ticks <= 65536 && "out of range high/low ticks");
+    // ticks=0 means 65536 in hardware
+    if (high_ticks >= 65536) {
+        high_ticks = 0;
+    }
+    if (low_ticks >= 65536) {
+        low_ticks = 0;
+    }
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chncarrier_duty[channel], carrier_high_chn, high_ticks);
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chncarrier_duty[channel], carrier_low_chn, low_ticks);
+}
+
+/**
+ * @brief Enable modulating carrier signal to TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_tx_enable_carrier_modulation(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chnconf0[channel].carrier_en_chn = enable;
+}
+
+/**
+ * @brief Set on high or low to modulate the carrier signal
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param level Which level to modulate on (0=>low level, 1=>high level)
+ */
+static inline void rmt_ll_tx_set_carrier_level(rmt_dev_t *dev, uint32_t channel, uint8_t level)
+{
+    dev->chnconf0[channel].carrier_out_lv_chn = level;
+}
+
+/**
+ * @brief Enable to always output carrier signal, regardless of a valid data transmission
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param enable True to output carrier signal in all RMT state, False to only output carrier signal for effective data
+ */
+static inline void rmt_ll_tx_enable_carrier_always_on(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chnconf0[channel].carrier_eff_en_chn = !enable;
+}
+
+////////////////////////////////////////RX Channel Specific/////////////////////////////////////////////////////////////
+
+/**
+ * @brief Reset clock divider for RX channels by mask
+ *
+ * @param dev Peripheral instance address
+ * @param channel_mask Mask of RX channels
+ */
+static inline void rmt_ll_rx_reset_channels_clock_div(rmt_dev_t *dev, uint32_t channel_mask)
+{
+    // write 1 to reset
+    dev->ref_cnt_rst.val |= ((channel_mask & 0x03) << 2);
+}
+
+/**
+ * @brief Set RX channel clock divider
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param div Division value
+ */
+static inline void rmt_ll_rx_set_channel_clock_div(rmt_dev_t *dev, uint32_t channel, uint32_t div)
+{
+    HAL_ASSERT(div >= 1 && div <= 256 && "divider out of range");
+    // limit the maximum divider to 256
+    if (div >= 256) {
+        div = 0; // 0 means 256 division
+    }
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chmconf[channel].conf0, div_cnt_chm, div);
+}
+
+/**
+ * @brief Reset RMT writing pointer for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_reset_pointer(rmt_dev_t *dev, uint32_t channel)
+{
+    dev->chmconf[channel].conf1.mem_wr_rst_chm = 1;
+    dev->chmconf[channel].conf1.mem_wr_rst_chm = 0;
+    dev->chmconf[channel].conf1.apb_mem_rst_chm = 1;
+    dev->chmconf[channel].conf1.apb_mem_rst_chm = 0;
+}
+
+/**
+ * @brief Enable receiving for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_enable(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chmconf[channel].conf1.rx_en_chm = enable;
+    // rx won't be enabled until configurations updated
+    dev->chmconf[channel].conf1.conf_update_chm = 1;
+}
+
+/**
+ * @brief Set memory block number for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param block_num memory block number
+ */
+static inline void rmt_ll_rx_set_mem_blocks(rmt_dev_t *dev, uint32_t channel, uint8_t block_num)
+{
+    dev->chmconf[channel].conf0.mem_size_chm = block_num;
+}
+
+/**
+ * @brief Set the time length for RX channel before going into IDLE state
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param thres Time length threshold
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_set_idle_thres(rmt_dev_t *dev, uint32_t channel, uint32_t thres)
+{
+    dev->chmconf[channel].conf0.idle_thres_chm = thres;
+}
+
+/**
+ * @brief Set RMT memory owner for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param owner Memory owner
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_set_mem_owner(rmt_dev_t *dev, uint32_t channel, rmt_ll_mem_owner_t owner)
+{
+    dev->chmconf[channel].conf1.mem_owner_chm = owner;
+}
+
+/**
+ * @brief Enable filter for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX chanenl number
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_enable_filter(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chmconf[channel].conf1.rx_filter_en_chm = enable;
+}
+
+/**
+ * @brief Set RX channel filter threshold (i.e. the maximum width of one pulse signal that would be treated as a noise)
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param thres Filter threshold
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_rx_set_filter_thres(rmt_dev_t *dev, uint32_t channel, uint32_t thres)
+{
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chmconf[channel].conf1, rx_filter_thres_chm, thres);
+}
+
+/**
+ * @brief Get RMT memory write cursor offset
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @return writer offset
+ */
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_rx_get_memory_writer_offset(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chmstatus[channel].mem_waddr_ex_chm - (channel + 2) * 48;
+}
+
+/**
+ * @brief Set the amount of RMT symbols that can trigger the limitation interrupt
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param limit Specify the number of symbols
+ */
+static inline void rmt_ll_rx_set_limit(rmt_dev_t *dev, uint32_t channel, uint32_t limit)
+{
+    dev->chm_rx_lim[channel].rmt_rx_lim_chm = limit;
+}
+
+/**
+ * @brief Set high and low duration of carrier signal
+ *
+ * @param dev dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @param high_ticks Duration of high level
+ * @param low_ticks Duration of low level
+ */
+static inline void rmt_ll_rx_set_carrier_high_low_ticks(rmt_dev_t *dev, uint32_t channel, uint32_t high_ticks, uint32_t low_ticks)
+{
+    HAL_ASSERT(high_ticks >= 1 && high_ticks <= 65536 && low_ticks >= 1 && low_ticks <= 65536 && "out of range high/low ticks");
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chm_rx_carrier_rm[channel], carrier_high_thres_chm, high_ticks - 1);
+    HAL_FORCE_MODIFY_U32_REG_FIELD(dev->chm_rx_carrier_rm[channel], carrier_low_thres_chm, low_ticks - 1);
+}
+
+/**
+ * @brief Enable demodulating the carrier on RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_rx_enable_carrier_demodulation(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chmconf[channel].conf0.carrier_en_chm = enable;
+}
+
+/**
+ * @brief Set on high or low to demodulate the carrier signal
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param level Which level to demodulate (0=>low level, 1=>high level)
+ */
+static inline void rmt_ll_rx_set_carrier_level(rmt_dev_t *dev, uint32_t channel, uint8_t level)
+{
+    dev->chmconf[channel].conf0.carrier_out_lv_chm = level;
+}
+
+/**
+ * @brief Enable RX wrap
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @param enable True to enable, False to disable
+ */
+static inline void rmt_ll_rx_enable_wrap(rmt_dev_t *dev, uint32_t channel, bool enable)
+{
+    dev->chmconf[channel].conf1.mem_rx_wrap_en_chm = enable;
+}
+
+//////////////////////////////////////////Interrupt Specific////////////////////////////////////////////////////////////
+
+/**
+ * @brief Enable RMT interrupt for specific event mask
+ *
+ * @param dev Peripheral instance address
+ * @param mask Event mask
+ * @param enable True to enable, False to disable
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_enable_interrupt(rmt_dev_t *dev, uint32_t mask, bool enable)
+{
+    if (enable) {
+        dev->int_ena.val |= mask;
+    } else {
+        dev->int_ena.val &= ~mask;
+    }
+}
+
+/**
+ * @brief Clear RMT interrupt status by mask
+ *
+ * @param dev Peripheral instance address
+ * @param mask Interrupt status mask
+ */
+__attribute__((always_inline))
+static inline void rmt_ll_clear_interrupt_status(rmt_dev_t *dev, uint32_t mask)
+{
+    dev->int_clr.val = mask;
+}
+
+/**
+ * @brief Get interrupt status register address
+ *
+ * @param dev Peripheral instance address
+ * @return Register address
+ */
+static inline volatile void *rmt_ll_get_interrupt_status_reg(rmt_dev_t *dev)
+{
+    return &dev->int_st;
+}
+
+/**
+ * @brief Get interrupt status for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @return Interrupt status
+ */
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_tx_get_interrupt_status(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->int_st.val & RMT_LL_EVENT_TX_MASK(channel);
+}
+
+/**
+ * @brief Get interrupt raw status for TX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT TX channel number
+ * @return Interrupt raw status
+ */
+static inline uint32_t rmt_ll_tx_get_interrupt_status_raw(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->int_raw.val & (RMT_LL_EVENT_TX_MASK(channel) | RMT_LL_EVENT_TX_ERROR(channel));
+}
+
+/**
+ * @brief Get interrupt raw status for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @return Interrupt raw status
+ */
+static inline uint32_t rmt_ll_rx_get_interrupt_status_raw(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->int_raw.val & (RMT_LL_EVENT_RX_MASK(channel) | RMT_LL_EVENT_RX_ERROR(channel));
+}
+
+/**
+ * @brief Get interrupt status for RX channel
+ *
+ * @param dev Peripheral instance address
+ * @param channel RMT RX channel number
+ * @return Interrupt status
+ */
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_rx_get_interrupt_status(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->int_st.val & RMT_LL_EVENT_RX_MASK(channel);
+}
+
+//////////////////////////////////////////Deprecated Functions//////////////////////////////////////////////////////////
+/////////////////////////////The following functions are only used by the legacy driver/////////////////////////////////
+/////////////////////////////They might be removed in the next major release (ESP-IDF 6.0)//////////////////////////////
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_tx_get_status_word(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chnstatus[channel].val;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_rx_get_status_word(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chmstatus[channel].val;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_tx_get_channel_clock_div(rmt_dev_t *dev, uint32_t channel)
+{
+    uint32_t div = HAL_FORCE_READ_U32_REG_FIELD(dev->chnconf0[channel], div_cnt_chn);
+    return div == 0 ? 256 : div;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_rx_get_channel_clock_div(rmt_dev_t *dev, uint32_t channel)
+{
+    uint32_t div = HAL_FORCE_READ_U32_REG_FIELD(dev->chmconf[channel].conf0, div_cnt_chm);
+    return div == 0 ? 256 : div;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_rx_get_idle_thres(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chmconf[channel].conf0.idle_thres_chm;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_tx_get_mem_blocks(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chnconf0[channel].mem_size_chn;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_rx_get_mem_blocks(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chmconf[channel].conf0.mem_size_chm;
+}
+
+__attribute__((always_inline))
+static inline bool rmt_ll_tx_is_loop_enabled(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chnconf0[channel].tx_conti_mode_chn;
+}
+
+__attribute__((always_inline))
+static inline rmt_clock_source_t rmt_ll_get_group_clock_src(rmt_dev_t *dev, uint32_t channel)
+{
+    rmt_clock_source_t clk_src = RMT_CLK_SRC_XTAL;
+    switch (PCR.rmt_sclk_conf.rmt_sclk_sel) {
+    case 1:
+        clk_src = RMT_CLK_SRC_RC_FAST;
+        break;
+    case 0:
+        clk_src = RMT_CLK_SRC_XTAL;
+        break;
+    }
+    return clk_src;
+}
+
+__attribute__((always_inline))
+static inline bool rmt_ll_tx_is_idle_enabled(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chnconf0[channel].idle_out_en_chn;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_tx_get_idle_level(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chnconf0[channel].idle_out_lv_chn;
+}
+
+static inline bool rmt_ll_is_mem_force_powered_down(rmt_dev_t *dev)
+{
+    return dev->sys_conf.rmt_mem_force_pd;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_rx_get_mem_owner(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chmconf[channel].conf1.mem_owner_chm;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_rx_get_limit(rmt_dev_t *dev, uint32_t channel)
+{
+    return dev->chm_rx_lim[channel].rmt_rx_lim_chm;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_get_tx_end_interrupt_status(rmt_dev_t *dev)
+{
+    return dev->int_st.val & 0x03;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_get_rx_end_interrupt_status(rmt_dev_t *dev)
+{
+    return (dev->int_st.val >> 2) & 0x03;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_get_tx_err_interrupt_status(rmt_dev_t *dev)
+{
+    return (dev->int_st.val >> 4) & 0x03;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_get_rx_err_interrupt_status(rmt_dev_t *dev)
+{
+    return (dev->int_st.val >> 6) & 0x03;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_get_tx_thres_interrupt_status(rmt_dev_t *dev)
+{
+    return (dev->int_st.val >> 8) & 0x03;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_get_rx_thres_interrupt_status(rmt_dev_t *dev)
+{
+    return (dev->int_st.val >> 10) & 0x03;
+}
+
+__attribute__((always_inline))
+static inline uint32_t rmt_ll_get_tx_loop_interrupt_status(rmt_dev_t *dev)
+{
+    return (dev->int_st.val >> 12) & 0x03;
+}
+
+#ifdef __cplusplus
+}
+#endif

components/soc/esp32h21/include/soc/Kconfig.soc_caps.in

@@ -111,6 +111,10 @@ config SOC_REG_I2C_SUPPORTED
     bool
     default y
 
+config SOC_RMT_SUPPORTED
+    bool
+    default y
+
 config SOC_AES_SUPPORTED
     bool
     default y
@@ -455,6 +459,66 @@ config SOC_LEDC_CHANNEL_NUM
     int
     default 6
 
+config SOC_RMT_GROUPS
+    int
+    default 1
+
+config SOC_RMT_TX_CANDIDATES_PER_GROUP
+    int
+    default 2
+
+config SOC_RMT_RX_CANDIDATES_PER_GROUP
+    int
+    default 2
+
+config SOC_RMT_CHANNELS_PER_GROUP
+    int
+    default 4
+
+config SOC_RMT_MEM_WORDS_PER_CHANNEL
+    int
+    default 48
+
+config SOC_RMT_SUPPORT_RX_PINGPONG
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_RX_DEMODULATION
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_TX_ASYNC_STOP
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_TX_LOOP_COUNT
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_TX_SYNCHRO
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_XTAL
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_RC_FAST
+    bool
+    default y
+
+config SOC_RMT_SUPPORT_SLEEP_RETENTION
+    bool
+    default y
+
 config SOC_MPI_MEM_BLOCKS_NUM
     int
     default 4

components/soc/esp32h21/include/soc/clk_tree_defs.h

@@ -200,6 +200,30 @@ typedef enum {
 #endif
 } soc_periph_tg_clk_src_legacy_t;
 
+//////////////////////////////////////////////////RMT///////////////////////////////////////////////////////////////////
+
+/**
+ * @brief Array initializer for all supported clock sources of RMT
+ */
+#define SOC_RMT_CLKS {SOC_MOD_CLK_XTAL, SOC_MOD_CLK_RC_FAST}
+
+/**
+ * @brief Type of RMT clock source
+ */
+typedef enum {
+    RMT_CLK_SRC_RC_FAST = SOC_MOD_CLK_RC_FAST,   /*!< Select RC_FAST as the source clock */
+    RMT_CLK_SRC_XTAL = SOC_MOD_CLK_XTAL,         /*!< Select XTAL as the source clock */
+    RMT_CLK_SRC_DEFAULT = SOC_MOD_CLK_XTAL,      /*!< Select XTAL as the default choice */
+} soc_periph_rmt_clk_src_t;
+
+/**
+ * @brief Type of RMT clock source, reserved for the legacy RMT driver
+ */
+typedef enum {
+    RMT_BASECLK_XTAL = SOC_MOD_CLK_XTAL,    /*!< RMT source clock is XTAL */
+    RMT_BASECLK_DEFAULT = SOC_MOD_CLK_XTAL, /*!< RMT source clock default choice is XTAL */
+} soc_periph_rmt_clk_src_legacy_t;
+
 ///////////////////////////////////////////////////UART/////////////////////////////////////////////////////////////////
 
 /**

components/soc/esp32h21/include/soc/soc_caps.h

@@ -77,7 +77,7 @@
 // #define SOC_TWAI_SUPPORTED              1    //TODO: [ESP32H21] IDF-11574
 // #define SOC_ETM_SUPPORTED               1    //TODO: [ESP32H21] IDF-11576
 // #define SOC_PARLIO_SUPPORTED            1    //TODO: [ESP32H21] IDF-11570, IDF-11572
-// #define SOC_RMT_SUPPORTED               1    //TODO: [ESP32H21] IDF-11622
+#define SOC_RMT_SUPPORTED               1
 #define SOC_AES_SUPPORTED               1
 // #define SOC_SDIO_SLAVE_SUPPORTED        1
 #define SOC_PAU_SUPPORTED               1
@@ -310,21 +310,21 @@
 // #define SOC_PCNT_SUPPORT_RUNTIME_THRES_UPDATE 1
 
 /*--------------------------- RMT CAPS ---------------------------------------*/
-// #define SOC_RMT_GROUPS                        1U /*!< One RMT group */
+#define SOC_RMT_GROUPS                        1U /*!< One RMT group */
-// #define SOC_RMT_TX_CANDIDATES_PER_GROUP       2  /*!< Number of channels that capable of Transmit */
+#define SOC_RMT_TX_CANDIDATES_PER_GROUP       2  /*!< Number of channels that capable of Transmit */
-// #define SOC_RMT_RX_CANDIDATES_PER_GROUP       2  /*!< Number of channels that capable of Receive */
+#define SOC_RMT_RX_CANDIDATES_PER_GROUP       2  /*!< Number of channels that capable of Receive */
-// #define SOC_RMT_CHANNELS_PER_GROUP            4  /*!< Total 4 channels */
+#define SOC_RMT_CHANNELS_PER_GROUP            4  /*!< Total 4 channels */
-// #define SOC_RMT_MEM_WORDS_PER_CHANNEL         48 /*!< Each channel owns 48 words memory (1 word = 4 Bytes) */
+#define SOC_RMT_MEM_WORDS_PER_CHANNEL         48 /*!< Each channel owns 48 words memory (1 word = 4 Bytes) */
-// #define SOC_RMT_SUPPORT_RX_PINGPONG           1  /*!< Support Ping-Pong mode on RX path */
+#define SOC_RMT_SUPPORT_RX_PINGPONG           1  /*!< Support Ping-Pong mode on RX path */
-// #define SOC_RMT_SUPPORT_RX_DEMODULATION       1  /*!< Support signal demodulation on RX path (i.e. remove carrier) */
+#define SOC_RMT_SUPPORT_RX_DEMODULATION       1  /*!< Support signal demodulation on RX path (i.e. remove carrier) */
-// #define SOC_RMT_SUPPORT_TX_ASYNC_STOP         1  /*!< Support stop transmission asynchronously */
+#define SOC_RMT_SUPPORT_TX_ASYNC_STOP         1  /*!< Support stop transmission asynchronously */
-// #define SOC_RMT_SUPPORT_TX_LOOP_COUNT         1  /*!< Support transmit specified number of cycles in loop mode */
+#define SOC_RMT_SUPPORT_TX_LOOP_COUNT         1  /*!< Support transmit specified number of cycles in loop mode */
-// #define SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP     1  /*!< Hardware support of auto-stop in loop mode */
+#define SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP     1  /*!< Hardware support of auto-stop in loop mode */
-// #define SOC_RMT_SUPPORT_TX_SYNCHRO            1  /*!< Support coordinate a group of TX channels to start simultaneously */
+#define SOC_RMT_SUPPORT_TX_SYNCHRO            1  /*!< Support coordinate a group of TX channels to start simultaneously */
-// #define SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY  1  /*!< TX carrier can be modulated to data phase only */
+#define SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY  1  /*!< TX carrier can be modulated to data phase only */
-// #define SOC_RMT_SUPPORT_XTAL                  1  /*!< Support set XTAL clock as the RMT clock source */
+#define SOC_RMT_SUPPORT_XTAL                  1  /*!< Support set XTAL clock as the RMT clock source */
-// #define SOC_RMT_SUPPORT_RC_FAST               1  /*!< Support set RC_FAST as the RMT clock source */
+#define SOC_RMT_SUPPORT_RC_FAST               1  /*!< Support set RC_FAST as the RMT clock source */
-// #define SOC_RMT_SUPPORT_SLEEP_RETENTION       1  /*!< The sleep retention feature can help back up RMT registers before sleep */
+#define SOC_RMT_SUPPORT_SLEEP_RETENTION       1  /*!< The sleep retention feature can help back up RMT registers before sleep */
 
 /*-------------------------- MCPWM CAPS --------------------------------------*/
 // #define SOC_MCPWM_GROUPS                     (1U)   ///< 1 MCPWM groups on the chip (i.e., the number of independent MCPWM peripherals)

components/soc/esp32h21/ld/esp32h21.peripherals.ld

@@ -12,6 +12,7 @@ PROVIDE ( I2C0                = 0x60004000 );
 PROVIDE ( I2C1                = 0x60005000 );
 PROVIDE ( UHCI0               = 0x60006000 );
 PROVIDE ( RMT                 = 0x60007000 );
+PROVIDE ( RMTMEM              = 0x60007400 );
 PROVIDE ( LEDC                = 0x60008000 );
 PROVIDE ( TIMERG0             = 0x60009000 );
 PROVIDE ( TIMERG1             = 0x6000A000 );

components/soc/esp32h21/register/soc/pcr_struct.h

@@ -317,8 +317,7 @@ typedef union {
          */
         uint32_t rmt_sclk_div_num:8;
         /** rmt_sclk_sel : R/W; bitpos: [20]; default: 1;
-         *  set this field to select clock-source. 0: do not select anyone clock, 1(default):
+         *  set this field to select clock-source. 0: XTAL, 1(default): RC_FAST.
-         *  80MHz, 2: FOSC, 3: XTAL.
          */
         uint32_t rmt_sclk_sel:1;
         /** rmt_sclk_en : R/W; bitpos: [21]; default: 1;

components/soc/esp32h21/register/soc/rmt_struct.h

@@ -1,5 +1,5 @@
 /**
- * SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
+ * SPDX-FileCopyrightText: 2024-2025 Espressif Systems (Shanghai) CO LTD
  *
  *  SPDX-License-Identifier: Apache-2.0
  */
@@ -753,13 +753,13 @@ typedef union {
 } rmt_date_reg_t;
 
 
-typedef struct {
+typedef struct rmt_dev_t {
     volatile rmt_chndata_reg_t chndata[4];
     volatile rmt_chnconf0_reg_t chnconf0[2];
-    volatile rmt_chmconf0_reg_t ch2conf0;
+    volatile struct {
-    volatile rmt_chmconf1_reg_t ch2conf1;
+        rmt_chmconf0_reg_t conf0;
-    volatile rmt_chmconf0_reg_t ch3conf0;
+        rmt_chmconf1_reg_t conf1;
-    volatile rmt_chmconf1_reg_t ch3conf1;
+    } chmconf[2];
     volatile rmt_chnstatus_reg_t chnstatus[2];
     volatile rmt_chmstatus_reg_t chmstatus[2];
     volatile rmt_int_raw_reg_t int_raw;

components/soc/esp32h21/rmt_periph.c

@@ -0,0 +1,67 @@
+/*
+ * SPDX-FileCopyrightText: 2025 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+
+#include "soc/rmt_periph.h"
+#include "soc/rmt_reg.h"
+#include "soc/gpio_sig_map.h"
+
+const rmt_signal_conn_t rmt_periph_signals = {
+    .groups = {
+        [0] = {
+            .irq = ETS_RMT_INTR_SOURCE,
+            .channels = {
+                [0] = {
+                    .tx_sig = RMT_SIG_OUT0_IDX,
+                    .rx_sig = -1
+                },
+                [1] = {
+                    .tx_sig = RMT_SIG_OUT1_IDX,
+                    .rx_sig = -1
+                },
+                [2] = {
+                    .tx_sig = -1,
+                    .rx_sig = RMT_SIG_IN0_IDX
+                },
+                [3] = {
+                    .tx_sig = -1,
+                    .rx_sig = RMT_SIG_IN1_IDX
+                },
+            }
+        }
+    }
+};
+
+/**
+ * RMT Registers to be saved during sleep retention
+ * - Channel configuration registers, e.g.: RMT_CH0CONF0_REG, RMT_CH3CONF0_REG, RMT_CH3CONF1_REG, RMT_CH0_TX_LIM_REG, RMT_CH3_RX_LIM_REG
+ * - TX synchronization registers, e.g.: RMT_TX_SIM_REG
+ * - Interrupt enable registers, e.g.: RMT_INT_ENA_REG
+ * - Carrier duty registers, e.g.: RMT_CH0CARRIER_DUTY_REG, RMT_CH3_RX_CARRIER_RM_REG
+ * - Global configuration registers, e.g.: RMT_SYS_CONF_REG
+*/
+#define RMT_RETENTION_REGS_CNT 17
+#define RMT_RETENTION_REGS_BASE (DR_REG_RMT_BASE + 0x10)
+static const uint32_t rmt_regs_map[4] = {0xffd03f, 0x0, 0x0, 0x0};
+static const regdma_entries_config_t rmt_regdma_entries[] = {
+    // backup stage: save configuration registers
+    // restore stage: restore the configuration registers
+    [0] = {
+        .config = REGDMA_LINK_ADDR_MAP_INIT(REGDMA_RMT_LINK(0x00),
+                                            RMT_RETENTION_REGS_BASE, RMT_RETENTION_REGS_BASE,
+                                            RMT_RETENTION_REGS_CNT, 0, 0,
+                                            rmt_regs_map[0], rmt_regs_map[1],
+                                            rmt_regs_map[2], rmt_regs_map[3]),
+        .owner = ENTRY(0) | ENTRY(2),
+    },
+};
+
+const rmt_reg_retention_info_t rmt_reg_retention_info[SOC_RMT_GROUPS] = {
+    [0] = {
+        .module = SLEEP_RETENTION_MODULE_RMT0,
+        .regdma_entry_array = rmt_regdma_entries,
+        .array_size = ARRAY_SIZE(rmt_regdma_entries)
+    },
+};

docs/docs_not_updated/esp32h21.txt

@@ -135,7 +135,6 @@ api-reference/bluetooth/esp_a2dp.rst
 api-reference/bluetooth/esp_hf_defs.rst
 api-reference/peripherals/cap_touch_sens.rst
 api-reference/peripherals/index.rst
-api-reference/peripherals/rmt.rst
 api-reference/peripherals/sdio_slave.rst
 api-reference/peripherals/bitscrambler.rst
 api-reference/peripherals/temp_sensor.rst

examples/peripherals/rmt/dshot_esc/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
 # RMT Infinite Loop Transmit Example -- Dshot ESC (Electronic Speed Controller)
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/peripherals/rmt/ir_nec_transceiver/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
 # IR NEC Encoding and Decoding Example
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/peripherals/rmt/led_strip/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
 # RMT Transmit Example -- LED Strip
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/peripherals/rmt/led_strip_simple_encoder/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
 # RMT Transmit Example -- LED Strip
 
 (See the README.md file in the upper level 'examples' directory for more information about examples.)

examples/peripherals/rmt/musical_buzzer/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
+| ----------------- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
 
 # RMT Transmit Loop Count Example -- Musical Buzzer
 

examples/peripherals/rmt/onewire/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
+| Supported Targets | ESP32 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S2 | ESP32-S3 |
-| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- | -------- |
 
 # Advanced RMT Transmit & Receive Example -- Simulate 1-Wire Bus
 

examples/peripherals/rmt/stepper_motor/README.md

@@ -1,5 +1,5 @@
-| Supported Targets | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H4 | ESP32-P4 | ESP32-S3 |
+| Supported Targets | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-H21 | ESP32-H4 | ESP32-P4 | ESP32-S3 |
-| ----------------- | -------- | -------- | -------- | -------- | -------- | -------- |
+| ----------------- | -------- | -------- | -------- | --------- | -------- | -------- | -------- |
 
 # RMT Based Stepper Motor Smooth Controller