espressif/esp-idf
1
0
Fork 1
mirror of https://github.com/espressif/esp-idf.git synced 2025-10-02 18:10:57 +02:00
Code Issues Packages Projects Releases Wiki Activity

change(esp_hw_support): update wait pll calibration done in sleep_clock

Browse Source
This commit is contained in:
hebinglin
2025-08-28 21:51:40 +08:00
parent 752ca902f6
commit e2534b1b5f
3 changed files with 34 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

44
components/esp_hw_support/lowpower/port/esp32h4/sleep_clock.c
View File

@@ -8,19 +8,21 @@
#include "soc/pcr_reg.h"
#include "modem/modem_syscon_reg.h"
#include "modem/modem_lpcon_reg.h"
#include "soc/i2c_ana_mst_reg.h"
#include "soc/pmu_reg.h"
#include "soc/lp_analog_peri_reg.h"
static const char *TAG = "sleep_clock";
esp_err_t sleep_clock_system_retention_init(void *arg)
{
#define N_REGS_PCR() (((PCR_ZERO_DET_CLK_CONF_REG - DR_REG_PCR_BASE) / 4) + 1)
const static sleep_retention_entries_config_t pcr_regs_retention[] = {
/* Clock configuration retention */
[0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(0x0), DR_REG_PCR_BASE, DR_REG_PCR_BASE, N_REGS_PCR(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
[1] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(0x2), PCR_BUS_CLK_UPDATE_REG, PCR_BUS_CLOCK_UPDATE, PCR_BUS_CLOCK_UPDATE_M, 1, 0), .owner = ENTRY(0) | ENTRY(2) },
[2] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(0x3), PCR_BUS_CLK_UPDATE_REG, 0x0, PCR_BUS_CLOCK_UPDATE_M, 1, 0), .owner = ENTRY(0) | ENTRY(2) }
[0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(0), DR_REG_PCR_BASE, DR_REG_PCR_BASE, N_REGS_PCR(), 0, 0), .owner = ENTRY(0) | ENTRY(2) },
[1] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_PCR_LINK(1), PCR_RESET_EVENT_BYPASS_REG, PCR_RESET_EVENT_BYPASS_REG, 1, 0, 0), .owner = ENTRY(0) | ENTRY(2) },
[2] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_PCR_LINK(2), PCR_BUS_CLK_UPDATE_REG, PCR_BUS_CLOCK_UPDATE, PCR_BUS_CLOCK_UPDATE_M, 1, 0), .owner = ENTRY(0) | ENTRY(2) },
[3] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_PCR_LINK(3), PCR_BUS_CLK_UPDATE_REG, 0x0, PCR_BUS_CLOCK_UPDATE_M, 1, 0), .owner = ENTRY(0) | ENTRY(2) },
};
esp_err_t err = sleep_retention_entries_create(pcr_regs_retention, ARRAY_SIZE(pcr_regs_retention), REGDMA_LINK_PRI_SYS_CLK, SLEEP_RETENTION_MODULE_CLOCK_SYSTEM);
@@ -31,15 +33,29 @@ esp_err_t sleep_clock_system_retention_init(void *arg)
#undef N_REGS_PCR
}
#if CONFIG_MAC_BB_PD || CONFIG_BT_LE_SLEEP_ENABLE || CONFIG_IEEE802154_SLEEP_ENABLE || SOC_PM_MODEM_CLK_RETENTION_WORKROUND
#if CONFIG_MAC_BB_PD || CONFIG_BT_LE_SLEEP_ENABLE || CONFIG_IEEE802154_SLEEP_ENABLE || SOC_PM_MODEM_CLK_CONF_RETENTION
esp_err_t sleep_clock_modem_retention_init(void *arg)
{
#define N_REGS_SYSCON() (((MODEM_SYSCON_MEM_RF2_CONF_REG - MODEM_SYSCON_TEST_CONF_REG) / 4) + 1)
#define N_REGS_LPCON() (((MODEM_LPCON_MEM_CONF_REG - MODEM_LPCON_TEST_CONF_REG) / 4) + 1)
/* In ESP32H4, the I2C control registers (syscon, lpcon) are placed in the modem domain,
and the BBPL requires I2C for calibration. This is the reason why the code for the BPLL enableq
section needs to be placed in this function.*/
const static sleep_retention_entries_config_t modem_regs_retention[] = {
/* SYSCON LPCON configuration retention */
[0] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_MODEMSYSCON_LINK(0), MODEM_SYSCON_TEST_CONF_REG, MODEM_SYSCON_TEST_CONF_REG, N_REGS_SYSCON(), 0, 0), .owner = ENTRY(0) | ENTRY(1) }, /* MODEM SYSCON */
[1] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_MODEMLPCON_LINK(0), MODEM_LPCON_TEST_CONF_REG, MODEM_LPCON_TEST_CONF_REG, N_REGS_LPCON(), 0, 0), .owner = ENTRY(0) | ENTRY(1) } /* MODEM LPCON */
[1] = { .config = REGDMA_LINK_CONTINUOUS_INIT(REGDMA_MODEMLPCON_LINK (0), MODEM_LPCON_TEST_CONF_REG, MODEM_LPCON_TEST_CONF_REG, N_REGS_LPCON(), 0, 0), .owner = ENTRY(0) | ENTRY(1) }, /* MODEM LPCON */
/* Enable i2c master clock */
[2] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_MODEMSYSCON_LINK(1), MODEM_LPCON_CLK_CONF_REG, MODEM_LPCON_CLK_I2C_MST_EN, MODEM_LPCON_CLK_I2C_MST_EN_M, 1, 0), .owner = ENTRY(0) },
/* Start BBPLL self-calibration */
[3] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_MODEMSYSCON_LINK(2), I2C_ANA_MST_ANA_CONF0_REG, 0, I2C_MST_BBPLL_STOP_FORCE_HIGH, 1, 0), .owner = ENTRY(0) },
[4] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_MODEMSYSCON_LINK(3), I2C_ANA_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_LOW, I2C_MST_BBPLL_STOP_FORCE_LOW, 1, 0), .owner = ENTRY(0) },
/* Wait calibration done */
[5] = { .config = REGDMA_LINK_WAIT_INIT (REGDMA_MODEMSYSCON_LINK(4), I2C_ANA_MST_ANA_CONF0_REG, I2C_MST_BBPLL_CAL_DONE, I2C_MST_BBPLL_CAL_DONE, 1, 0), .owner = ENTRY(0) },
/* Stop BBPLL self-calibration */
[6] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_MODEMSYSCON_LINK(5), I2C_ANA_MST_ANA_CONF0_REG, 0, I2C_MST_BBPLL_STOP_FORCE_LOW, 1, 0), .owner = ENTRY(0) },
[7] = { .config = REGDMA_LINK_WRITE_INIT (REGDMA_MODEMSYSCON_LINK(6), I2C_ANA_MST_ANA_CONF0_REG, I2C_MST_BBPLL_STOP_FORCE_HIGH, I2C_MST_BBPLL_STOP_FORCE_HIGH, 1, 0), .owner = ENTRY(0) },
};
esp_err_t err = sleep_retention_entries_create(modem_regs_retention, ARRAY_SIZE(modem_regs_retention), REGDMA_LINK_PRI_MODEM_CLK, SLEEP_RETENTION_MODULE_CLOCK_MODEM);
@@ -58,12 +74,14 @@ bool clock_domain_pd_allowed(void)
const sleep_retention_module_bitmap_t created_modules = sleep_retention_get_created_modules();
const sleep_retention_module_bitmap_t sys_clk_dep_modules = (sleep_retention_module_bitmap_t){ .bitmap[SLEEP_RETENTION_MODULE_SYS_PERIPH >> 5] = BIT(SLEEP_RETENTION_MODULE_SYS_PERIPH % 32) };
/* The clock and reset of MODEM (WiFi, BLE and 15.4) modules are managed
/* The clock and reset of MODEM (BLE and 15.4) modules are managed
* through MODEM_SYSCON, when one or more MODEMs are initialized, it is
* necessary to check the state of CLOCK_MODEM to determine MODEM domain on
* or off. The clock and reset of digital peripherals are managed through
* PCR, with TOP domain similar to MODEM domain. */
__attribute__((unused)) sleep_retention_module_bitmap_t modem_clk_dep_modules = (sleep_retention_module_bitmap_t){ .bitmap = { 0 } };
#if SOC_BLE_SUPPORTED || SOC_IEEE802154_SUPPORTED
sleep_retention_module_bitmap_t modem_clk_dep_modules = (sleep_retention_module_bitmap_t){ .bitmap = { 0 } };
#endif
#if SOC_BT_SUPPORTED
modem_clk_dep_modules.bitmap[SLEEP_RETENTION_MODULE_BLE_MAC >> 5] |= BIT(SLEEP_RETENTION_MODULE_BLE_MAC % 32);
modem_clk_dep_modules.bitmap[SLEEP_RETENTION_MODULE_BT_BB >> 5] |= BIT(SLEEP_RETENTION_MODULE_BT_BB % 32);
@@ -86,7 +104,7 @@ bool clock_domain_pd_allowed(void)
mask.bitmap[SLEEP_RETENTION_MODULE_CLOCK_MODEM >> 5] |= BIT(SLEEP_RETENTION_MODULE_CLOCK_MODEM % 32);
}
#endif
#if SOC_PM_MODEM_CLK_RETENTION_WORKROUND
#if SOC_PM_MODEM_CLK_CONF_RETENTION
mask.bitmap[SLEEP_RETENTION_MODULE_CLOCK_MODEM >> 5] |= BIT(SLEEP_RETENTION_MODULE_CLOCK_MODEM % 32);
#endif
const sleep_retention_module_bitmap_t clock_domain_inited_modules = sleep_retention_module_bitmap_and(inited_modules, mask);
@@ -102,16 +120,16 @@ ESP_SYSTEM_INIT_FN(sleep_clock_startup_init, SECONDARY, BIT(0), 106)
};
sleep_retention_module_init(SLEEP_RETENTION_MODULE_CLOCK_SYSTEM, &init_param);
#if CONFIG_MAC_BB_PD || CONFIG_BT_LE_SLEEP_ENABLE || CONFIG_IEEE802154_SLEEP_ENABLE || SOC_PM_MODEM_CLK_RETENTION_WORKROUND
#if CONFIG_MAC_BB_PD || CONFIG_BT_LE_SLEEP_ENABLE || CONFIG_IEEE802154_SLEEP_ENABLE || SOC_PM_MODEM_CLK_CONF_RETENTION
init_param = (sleep_retention_module_init_param_t) {
.cbs = { .create = { .handle = sleep_clock_modem_retention_init, .arg = NULL } },
#if !SOC_PM_MODEM_CLK_RETENTION_WORKROUND
#if !SOC_PM_MODEM_CLK_CONF_RETENTION
.attribute = SLEEP_RETENTION_MODULE_ATTR_PASSIVE
#endif
};
sleep_retention_module_init(SLEEP_RETENTION_MODULE_CLOCK_MODEM, &init_param);
#endif
#if SOC_PM_MODEM_CLK_RETENTION_WORKROUND
#if SOC_PM_MODEM_CLK_CONF_RETENTION
if (sleep_retention_module_allocate(SLEEP_RETENTION_MODULE_CLOCK_MODEM) != ESP_OK) {
// even though the modem clock retention module create failed, sleep process can be executed without pd the modem domain, so just warning here
ESP_LOGW(TAG, "create retention link failed on modem clock, modem power domain won't be turned off during sleep");

2
components/soc/esp32h4/include/soc/Kconfig.soc_caps.in
View File

@@ -939,7 +939,7 @@ config SOC_PM_MODEM_RETENTION_BY_REGDMA
bool
default y
config SOC_PM_MODEM_CLK_RETENTION_WORKROUND
config SOC_PM_MODEM_CLK_CONF_RETENTION
bool
default y

2
components/soc/esp32h4/include/soc/soc_caps.h
View File

@@ -533,7 +533,7 @@
#define SOC_PM_CPU_RETENTION_BY_SW (1)
#define SOC_PM_MODEM_RETENTION_BY_REGDMA (1)
#define SOC_PM_MODEM_CLK_RETENTION_WORKROUND (1) /*!< In esp32H4, i2c lpcon is placed in modem domain*/
#define SOC_PM_MODEM_CLK_CONF_RETENTION (1) /*!< In esp32H4, i2c lpcon is placed in modem domain*/
#define SOC_PM_PAU_LINK_NUM (4)
#define SOC_PM_PAU_REGDMA_LINK_CONFIGURABLE (1)