diff --git a/docs/en/api-reference/peripherals/usb_host.rst b/docs/en/api-reference/peripherals/usb_host.rst
index d95368a1c9..5d08e46104 100644
--- a/docs/en/api-reference/peripherals/usb_host.rst
+++ b/docs/en/api-reference/peripherals/usb_host.rst
@@ -380,7 +380,7 @@ Host Stack Configuration
 Non-Compliant Device Support
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-To support USB devices that are non-compliant in various scenarios or exhibit specific behaviors it is possible to configure the USB Host stack.
+To support USB devices that are non-compliant in various scenarios or exhibit specific behaviors, it is possible to configure the USB Host stack.
 
 As a USB device may be hot-plugged, it is essential to have the configurable delays between power switching and device attachment, and when the device's internal power has stabilized.
 
@@ -398,13 +398,13 @@ During the process of enumerating connected USB devices, several timeout values
 
 The figure above shows all the timeouts associated with both turning on port power with a device connected and hot-plugging a device.
 
-* After a port is reset or resumed, the USB System Software is expected to provide a “recovery” interval of 10 ms before the device attached to the port is expected to respond to data transfers.
-* After the reset/resume recovery interval, if a device receives a SetAddress() request, the device must be able to complete processing of the request and be able to successfully complete the Status stage of the request within 50 ms.
-* After successful completion of the Status stage, the device is allowed a SetAddress() recovery interval of 2 ms.
+* After a port is reset or resumed, the USB system software is expected to provide a "recovery" interval of 10 ms before the device attached to the port is expected to respond to data transfers.
+* After the reset/resume recovery interval, if a device receives a ``SetAddress()`` request, the device must be able to complete processing of the request and be able to successfully complete the Status stage of the request within 50 ms.
+* After successful completion of the Status stage, the device is allowed a ``SetAddress()`` recovery interval of 2 ms.
 
 .. note::
 
-    For more details regarding connection event timings, please refer to the Universal Serial Bus 2.0 specification, chapter 7.1.7.3 "Connect and Disconnect Signaling".
+    For more details regarding connection event timings, please refer to *Universal Serial Bus 2.0 Specification* > Chapter 7.1.7.3 *Connect and Disconnect Signaling*.
 
 Configurable parameters of the USB host stack can be configured with multiple options via Menuconfig.