From f13b6d1f872b2a8a244701d4c510bd1d74e2f499 Mon Sep 17 00:00:00 2001 From: Erhan Kurubas Date: Tue, 31 Jan 2023 02:49:58 +0100 Subject: [PATCH] doc: fix usb-jtag configure efuse section --- docs/en/api-guides/jtag-debugging/configure-other-jtag.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/docs/en/api-guides/jtag-debugging/configure-other-jtag.rst b/docs/en/api-guides/jtag-debugging/configure-other-jtag.rst index 9b2fd4b1c5..597501bc31 100644 --- a/docs/en/api-guides/jtag-debugging/configure-other-jtag.rst +++ b/docs/en/api-guides/jtag-debugging/configure-other-jtag.rst @@ -15,12 +15,12 @@ For guidance about which JTAG interface to select when using OpenOCD with {IDF_T .. only:: esp32c3 - Burning ``DIS_USB_JTAG`` eFuse will permanently disable the connection between USB_SERIAL_JTAG and the JTAG port of the {IDF_TARGET_NAME}. JTAG interface can then be connected to |jtag-gpio-list|. Note that USB CDC functionality of USB_SERIAL_JTAG will still be usable, i.e., flashing and monitoring over USB CDC will still work. + Burning ``DIS_USB_JTAG`` eFuse will permanently disable the connection between USB_SERIAL_JTAG and the JTAG port of the {IDF_TARGET_NAME}. JTAG interface can then be connected to |jtag-gpio-list|. Note that USB CDC functionality of USB_SERIAL_JTAG will still be usable, i.e., flashing and monitoring over USB CDC will still work. .. only:: esp32s3 or esp32c6 - - Burning ``DIS_USB_JTAG`` eFuse will permanently disable the connection between USB_SERIAL_JTAG and the JTAG port of the {IDF_TARGET_NAME}. JTAG interface can then be connected to |jtag-gpio-list|. Note that USB CDC functionality of USB_SERIAL_JTAG will still be usable, i.e., flashing and monitoring over USB CDC will still work. - - Burning ``{IDF_TARGET_JTAG_SEL_EFUSE}`` eFuse will enable selection of JTAG interface by a strapping pin, |jtag-sel-gpio|. If the strapping pin is low when {IDF_TARGET_NAME} is reset, JTAG interface will use |jtag-gpio-list|. If the strapping pin is high, USB_SERIAL_JTAG will be used as the JTAG interface. + - Burning ``DIS_USB_JTAG`` eFuse will permanently disable the connection between USB_SERIAL_JTAG and the JTAG port of the {IDF_TARGET_NAME}. JTAG interface can then be connected to |jtag-gpio-list|. Note that USB CDC functionality of USB_SERIAL_JTAG will still be usable, i.e., flashing and monitoring over USB CDC will still work. + - Burning ``{IDF_TARGET_JTAG_SEL_EFUSE}`` eFuse will enable selection of JTAG interface by a strapping pin, |jtag-sel-gpio|. If the strapping pin is low when {IDF_TARGET_NAME} is reset, JTAG interface will use |jtag-gpio-list|. If the strapping pin is high, USB_SERIAL_JTAG will be used as the JTAG interface. .. warning:: Burning eFuses is an irreversible operation, so please consider the above option before starting the process.