espressif/esp-idf
1
0
Fork 1
mirror of https://github.com/espressif/esp-idf.git synced 2025-08-04 21:24:32 +02:00
Code Issues Packages Projects Releases Wiki Activity

openthread: support Ethernet based Thread BR

Browse Source
This commit is contained in:
xieqinan
2022-09-21 16:59:08 +08:00
committed by BOT
parent f33ac0a037
commit fd1195e18c
2 changed files with 15 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

9
examples/openthread/ot_br/README.md
View File

@@ -10,11 +10,11 @@ This example demonstrates an [OpenThread border router](https://openthread.io/gu
## How to use example
### Hardware Required
#### **Wi-Fi based Thread Border Router**
The following SoCs are required to run this example:
* An ESP32 series Wi-Fi SoC (ESP32, ESP32-C, ESP32-S, etc) loaded with this ot_br example.
* An ESP32-H2 802.15.4 SoC loaded with [ot_rcp](../ot_rcp) example.
* Another ESP32-H2 SoC loaded with [ot_cli](../ot_cli) example. Enable `OPENTHREAD_JOINER` option in menuconfig before compiling the example.
* Another ESP32-H2 SoC loaded with [ot_cli](../ot_cli) example.
Connect the two SoCs via UART, below is an example setup with ESP32 DevKitC and ESP32-H2 DevKitC:
![thread_br](image/thread-border-router-esp32-esp32h2.jpg)
@@ -25,6 +25,9 @@ ESP32 pin | ESP32-H2 pin
GPIO4 | TX
GPIO5 | RX
#### **Ethernet based Thread Border Router**
Similar to the previous Wi-Fi based Thread Border Route setup, but a device with Ethernet interface is required, such as [ESP32-Ethernet-Kit](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-ethernet-kit.html)
### Configure the project
```
@@ -39,6 +42,8 @@ The device will connect to Wi-Fi and form a Thread network automatically after b
- Manual mode
Disable `OPENTHREAD_BR_AUTO_START` and enable `OPENTHREAD_CLI_ESP_EXTENSION`. `wifi` command will be added for connecting the device to the Wi-Fi network.
If the `CONFIG_EXAMPLE_CONNECT_ETHERNET` option is enabled, the device will connect to `Ethernet`, form a Thread network and act as a Ethernet based Thread Border Router.
### Build, Flash, and Run
Build the project and flash it to the board, then run monitor tool to view serial output:

8
examples/openthread/ot_br/main/esp_ot_br.c
View File

@@ -213,6 +213,7 @@ void app_main(void)
ESP_ERROR_CHECK(esp_netif_init());
ESP_ERROR_CHECK(esp_event_loop_create_default());
#if CONFIG_EXAMPLE_CONNECT_WIFI
#if CONFIG_OPENTHREAD_BR_AUTO_START
ESP_ERROR_CHECK(example_connect());
ESP_ERROR_CHECK(esp_wifi_set_ps(WIFI_PS_NONE));
@@ -221,6 +222,13 @@ void app_main(void)
esp_ot_wifi_netif_init();
esp_openthread_set_backbone_netif(esp_netif_get_handle_from_ifkey("WIFI_STA_DEF"));
#endif // CONFIG_OPENTHREAD_BR_AUTO_START
#elif CONFIG_EXAMPLE_CONNECT_ETHERNET
ESP_ERROR_CHECK(example_connect());
esp_openthread_set_backbone_netif(get_example_netif());
#else
ESP_LOGE(TAG, "ESP-Openthread has not set backbone netif");
#endif // CONFIG_EXAMPLE_CONNECT_WIFI
ESP_ERROR_CHECK(mdns_init());
ESP_ERROR_CHECK(mdns_hostname_set("esp-ot-br"));
xTaskCreate(ot_task_worker, "ot_br_main", 20480, xTaskGetCurrentTaskHandle(), 5, NULL);