[pytest] # only the files with prefix `pytest_` would be recognized as pytest test scripts. python_files = pytest_*.py # ignore PytestExperimentalApiWarning for record_xml_attribute # set traceback to "short" to prevent the overwhelming tracebacks addopts = -s -vv --embedded-services esp,idf --tb short --strict-markers --skip-check-coredump y --logfile-extension ".txt" --check-duplicates y --ignore-glob */managed_components/* --ignore pytest-embedded --unity-test-report-mode merge --ignore-no-tests-collected-error # ignore DeprecationWarning filterwarnings = ignore::DeprecationWarning:matplotlib.*: ignore::DeprecationWarning:google.protobuf.*: ignore::FutureWarning # log related log_cli = True log_cli_level = INFO log_cli_format = %(asctime)s %(levelname)s %(message)s log_cli_date_format = %Y-%m-%d %H:%M:%S # junit related junit_family = xunit1 ## log all to `system-out` when case fail junit_logging = stdout junit_log_passing_tests = False markers = temp_skip_ci: mark test to be skipped in CI temp_skip: mark test to be skipped in CI and locally skip_app_downloader: mark test required apps built locally, not downloaded from CI require_elf: mark test to be skipped if no elf file is found env_markers = qemu: build and test using qemu, not real target macos: tests should be run on macos hosts generic: tests should be run on generic runners flash_suspend: support flash suspend feature eth_ip101: connected via IP101 ethernet transceiver eth_lan8720: connected via LAN8720 ethernet transceiver eth_rtl8201: connected via RTL8201 ethernet transceiver eth_ksz8041: connected via KSZ8041 ethernet transceiver eth_dp83848: connected via DP83848 ethernet transceiver eth_w5500: SPI Ethernet module with two W5500 eth_ksz8851snl: SPI Ethernet module with two KSZ8851SNL eth_dm9051: SPI Ethernet module with two DM9051 quad_psram: runners with quad psram octal_psram: runners with octal psram usb_host_flash_disk: usb host runners with USB flash disk attached usb_device: usb device runners ethernet_ota: ethernet OTA runners flash_encryption: Flash Encryption runners flash_encryption_f4r8: Flash Encryption runners with 4-line flash and 8-line psram flash_encryption_f8r8: Flash Encryption runners with 8-line flash and 8-line psram flash_encryption_ota: Flash Encryption runners with ethernet OTA support with 4mb flash size flash_multi: Multiple flash chips tests psram: Chip has 4-line psram ir_transceiver: runners with a pair of IR transmitter and receiver twai_transceiver: runners with a TWAI PHY transceiver flash_encryption_wifi_high_traffic: Flash Encryption runners with wifi high traffic support ethernet: ethernet runner ethernet_stress: ethernet runner with stress test ethernet_flash_8m: ethernet runner with 8mb flash ethernet_router: both the runner and dut connect to the same router through ethernet NIC ethernet_vlan: ethernet runner GARM-32-SH-1-R16S5N3 wifi_ap: a wifi AP in the environment wifi_router: both the runner and dut connect to the same wifi router wifi_high_traffic: wifi high traffic runners wifi_wlan: wifi runner with a wireless NIC wifi_iperf: the AP and ESP dut were placed in a shielded box - for iperf test Example_ShieldBox: multiple shielded APs connected to shielded ESP DUT via RF cable with programmable attenuator xtal_26mhz: runner with 26MHz xtal on board xtal_40mhz: runner with 40MHz xtal on board external_flash: external flash memory connected via VSPI (FSPI) sdcard_sdmode: sdcard running in SD mode, to be removed after test migration sdcard_spimode: sdcard running in SPI mode emmc: eMMC card sdcard: sdcard runner MSPI_F8R8: runner with Octal Flash and Octal PSRAM MSPI_F4R8: runner with Quad Flash and Octal PSRAM MSPI_F4R4: runner with Quad Flash and Quad PSRAM flash_120m: runner with 120M supported Flash jtag: runner where the chip is accessible through JTAG as well usb_serial_jtag: runner where the chip is accessible through builtin JTAG as well adc: ADC related tests should run on adc runners xtal32k: Runner with external 32k crystal connected no32kXtal: Runner with no external 32k crystal connected psramv0: Runner with PSRAM version 0 esp32eco3: Runner with esp32 eco3 connected ecdsa_efuse: Runner with test ECDSA private keys programmed in efuse ccs811: Runner with CCS811 connected nvs_encr_hmac: Runner with test HMAC key programmed in efuse i2c_oled: Runner with ssd1306 I2C oled connected httpbin: runner for tests that need to access the httpbin service flash_4mb: C2 runners with 4 MB flash jtag_re_enable: Runner to re-enable jtag which is softly disabled by burning bit SOFT_DIS_JTAG on eFuse es8311: Development board that carries es8311 codec camera: Runner with camera ov5647: Runner with camera ov5647 multi_dut_modbus_rs485: a pair of runners connected by RS485 bus ieee802154: ieee802154 related tests should run on ieee802154 runners. openthread_br: tests should be used for openthread border router. openthread_bbr: tests should be used for openthread border router linked to Internet. openthread_sleep: tests should be used for openthread sleepy device. zigbee_multi_dut: zigbee runner which have multiple duts. wifi_two_dut: tests should be run on runners which has two wifi duts connected. generic_multi_device: generic multiple devices whose corresponding gpio pins are connected to each other. twai_network: multiple runners form a TWAI network. sdio_master_slave: Test sdio multi board, esp32+esp32 sdio_multidev_32_c6: Test sdio multi board, esp32+esp32c6 sdio_multidev_32_c61: Test sdio multi board, esp32+esp32c61 sdio_multidev_p4_c5: Test sdio multi board, esp32p4+esp32c5 usj_device: Test usb_serial_jtag and usb_serial_jtag is used as serial only (not console) twai_std: twai runner with all twai supported targets connect to usb-can adapter lp_i2s: lp_i2s runner tested with hp_i2s ram_app: ram_app runners esp32c3eco7: esp32c3 major version(v1.1) chips esp32c2eco4: esp32c2 major version(v2.0) chips recovery_bootloader: Runner with recovery bootloader offset set in eFuse