mirror of
https://github.com/espressif/esp-idf.git
synced 2025-11-04 00:51:42 +01:00
327 lines
15 KiB
C
327 lines
15 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
#include <esp_types.h>
|
|
#include "esp_intr.h"
|
|
#include "esp_intr_alloc.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/semphr.h"
|
|
#include "freertos/xtensa_api.h"
|
|
#include "soc/gpio_sig_map.h"
|
|
#include "driver/ledc.h"
|
|
#include "esp_log.h"
|
|
|
|
static const char* LEDC_TAG = "ledc";
|
|
static portMUX_TYPE ledc_spinlock = portMUX_INITIALIZER_UNLOCKED;
|
|
#define LEDC_CHECK(a, str, ret_val) \
|
|
if (!(a)) { \
|
|
ESP_LOGE(LEDC_TAG,"%s(%d): %s", __FUNCTION__, __LINE__, str); \
|
|
return (ret_val); \
|
|
}
|
|
|
|
esp_err_t ledc_timer_set(ledc_mode_t speed_mode, ledc_timer_t timer_sel, uint32_t div_num, uint32_t bit_num, ledc_clk_src_t clk_src)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(timer_sel <= LEDC_TIMER_3, "ledc timer error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
LEDC.timer_group[speed_mode].timer[timer_sel].conf.div_num = div_num;
|
|
LEDC.timer_group[speed_mode].timer[timer_sel].conf.tick_sel = clk_src;
|
|
LEDC.timer_group[speed_mode].timer[timer_sel].conf.bit_num = bit_num;
|
|
if(speed_mode != LEDC_HIGH_SPEED_MODE) {
|
|
LEDC.timer_group[speed_mode].timer[timer_sel].conf.low_speed_update = 1;
|
|
}
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t ledc_duty_config(ledc_mode_t speed_mode, ledc_channel_t channel_num, uint32_t hpoint_val, uint32_t duty_val,
|
|
uint32_t duty_direction, uint32_t duty_num, uint32_t duty_cycle, uint32_t duty_scale)
|
|
{
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
LEDC.channel_group[speed_mode].channel[channel_num].hpoint.hpoint = hpoint_val;
|
|
LEDC.channel_group[speed_mode].channel[channel_num].duty.duty = duty_val;
|
|
LEDC.channel_group[speed_mode].channel[channel_num].conf1.val = ((duty_direction & LEDC_DUTY_INC_HSCH0_V) << LEDC_DUTY_INC_HSCH0_S) |
|
|
((duty_num & LEDC_DUTY_NUM_HSCH0_V) << LEDC_DUTY_NUM_HSCH0_S) |
|
|
((duty_cycle & LEDC_DUTY_CYCLE_HSCH0_V) << LEDC_DUTY_CYCLE_HSCH0_S) |
|
|
((duty_scale & LEDC_DUTY_SCALE_HSCH0_V) << LEDC_DUTY_SCALE_HSCH0_S);
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t ledc_bind_channel_timer(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t timer_idx)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(timer_idx <= LEDC_TIMER_3, "ledc timer error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
LEDC.channel_group[speed_mode].channel[channel].conf0.timer_sel = timer_idx;
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t ledc_timer_rst(ledc_mode_t speed_mode, uint32_t timer_sel)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(timer_sel <= LEDC_TIMER_3, "ledc timer error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
LEDC.timer_group[speed_mode].timer[timer_sel].conf.rst = 1;
|
|
LEDC.timer_group[speed_mode].timer[timer_sel].conf.rst = 0;
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t ledc_timer_pause(ledc_mode_t speed_mode, uint32_t timer_sel)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(timer_sel <= LEDC_TIMER_3, "ledc timer error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
LEDC.timer_group[speed_mode].timer[timer_sel].conf.pause = 1;
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t ledc_timer_resume(ledc_mode_t speed_mode, uint32_t timer_sel)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(timer_sel <= LEDC_TIMER_3, "ledc timer error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
LEDC.timer_group[speed_mode].timer[timer_sel].conf.pause = 0;
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t ledc_enable_intr_type(ledc_mode_t speed_mode, uint32_t channel, ledc_intr_type_t type)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
uint32_t value;
|
|
uint32_t intr_type = type;
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
value = LEDC.int_ena.val;
|
|
if(intr_type == LEDC_INTR_FADE_END) {
|
|
LEDC.int_ena.val = value | BIT(LEDC_DUTY_CHNG_END_HSCH0_INT_ENA_S + channel);
|
|
} else {
|
|
LEDC.int_ena.val = (value & (~(BIT(LEDC_DUTY_CHNG_END_HSCH0_INT_ENA_S + channel))));
|
|
}
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t ledc_isr_register(void (*fn)(void*), void * arg, int intr_alloc_flags, ledc_isr_handle_t *handle)
|
|
{
|
|
esp_err_t ret;
|
|
LEDC_CHECK(fn, "ledc isr null", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
ret=esp_intr_alloc(ETS_LEDC_INTR_SOURCE, intr_alloc_flags, fn, arg, handle);
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t ledc_timer_config(ledc_timer_config_t* timer_conf)
|
|
{
|
|
int freq_hz = timer_conf->freq_hz;
|
|
int bit_num = timer_conf->bit_num;
|
|
int timer_num = timer_conf->timer_num;
|
|
int speed_mode = timer_conf->speed_mode;
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
if(freq_hz == 0 || bit_num == 0 || bit_num > LEDC_TIMER_15_BIT) {
|
|
ESP_LOGE(LEDC_TAG, "freq_hz=%u bit_num=%u", freq_hz, bit_num);
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
if(timer_num > LEDC_TIMER_3) {
|
|
ESP_LOGE(LEDC_TAG, "invalid timer #%u", timer_num);
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
esp_err_t ret = ESP_OK;
|
|
uint32_t precision = (0x1 << bit_num); // 2**depth
|
|
// Try calculating divisor based on LEDC_APB_CLK
|
|
ledc_clk_src_t timer_clk_src = LEDC_APB_CLK;
|
|
// div_param is a Q10.8 fixed point value
|
|
uint64_t div_param = ((uint64_t) LEDC_APB_CLK_HZ << 8) / freq_hz / precision;
|
|
if (div_param < 256) {
|
|
// divisor is too low
|
|
ESP_LOGE(LEDC_TAG, "requested frequency and bit depth can not be achieved, try reducing freq_hz or bit_num. div_param=%d", (uint32_t) div_param);
|
|
ret = ESP_FAIL;
|
|
}
|
|
if (div_param > LEDC_DIV_NUM_HSTIMER0_V) {
|
|
// APB_CLK results in divisor which too high. Try using REF_TICK as clock source.
|
|
timer_clk_src = LEDC_REF_TICK;
|
|
div_param = ((uint64_t) LEDC_REF_CLK_HZ << 8) / freq_hz / precision;
|
|
if(div_param < 256 || div_param > LEDC_DIV_NUM_HSTIMER0_V) {
|
|
ESP_LOGE(LEDC_TAG, "requested frequency and bit depth can not be achieved, try increasing freq_hz or bit_num. div_param=%d", (uint32_t) div_param);
|
|
ret = ESP_FAIL;
|
|
}
|
|
}
|
|
// set timer parameters
|
|
ledc_timer_set(speed_mode, timer_num, div_param, bit_num, timer_clk_src);
|
|
// reset timer
|
|
ledc_timer_rst(speed_mode, timer_num);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t ledc_set_pin(int gpio_num, ledc_mode_t speed_mode, ledc_channel_t ledc_channel)
|
|
{
|
|
LEDC_CHECK(ledc_channel <= LEDC_CHANNEL_7, "ledc channel error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "ledc GPIO output number error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio_num], PIN_FUNC_GPIO);
|
|
gpio_set_direction(gpio_num, GPIO_MODE_OUTPUT);
|
|
if(speed_mode == LEDC_HIGH_SPEED_MODE) {
|
|
gpio_matrix_out(gpio_num, LEDC_HS_SIG_OUT0_IDX + ledc_channel, 0, 0);
|
|
} else {
|
|
ESP_LOGE(LEDC_TAG, "low speed mode is not implemented");
|
|
return ESP_ERR_NOT_SUPPORTED;
|
|
}
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t ledc_channel_config(ledc_channel_config_t* ledc_conf)
|
|
{
|
|
uint32_t speed_mode = ledc_conf->speed_mode;
|
|
uint32_t gpio_num = ledc_conf->gpio_num;
|
|
uint32_t ledc_channel = ledc_conf->channel;
|
|
uint32_t timer_select = ledc_conf->timer_sel;
|
|
uint32_t intr_type = ledc_conf->intr_type;
|
|
uint32_t duty = ledc_conf->duty;
|
|
LEDC_CHECK(ledc_channel <= LEDC_CHANNEL_7, "ledc channel error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(GPIO_IS_VALID_OUTPUT_GPIO(gpio_num), "ledc GPIO output number error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(timer_select <= LEDC_TIMER_3, "ledc timer error", ESP_ERR_INVALID_ARG);
|
|
periph_module_enable(PERIPH_LEDC_MODULE);
|
|
esp_err_t ret = ESP_OK;
|
|
/*set channel parameters*/
|
|
/* channel parameters decide how the waveform looks like in one period*/
|
|
/* set channel duty, duty range is (0 ~ ((2 ** bit_num) - 1))*/
|
|
ledc_set_duty(speed_mode, ledc_channel, duty);
|
|
/*update duty settings*/
|
|
ledc_update_duty(speed_mode, ledc_channel);
|
|
/*bind the channel with the timer*/
|
|
ledc_bind_channel_timer(speed_mode, ledc_channel, timer_select);
|
|
/*set interrupt type*/
|
|
ledc_enable_intr_type(speed_mode, ledc_channel, intr_type);
|
|
ESP_LOGI(LEDC_TAG, "LEDC_PWM CHANNEL %1u|GPIO %02u|Duty %04u|Time %01u",
|
|
ledc_channel, gpio_num, duty, timer_select
|
|
);
|
|
/*set LEDC signal in gpio matrix*/
|
|
PIN_FUNC_SELECT(GPIO_PIN_MUX_REG[gpio_num], PIN_FUNC_GPIO);
|
|
gpio_set_direction(gpio_num, GPIO_MODE_OUTPUT);
|
|
gpio_matrix_out(gpio_num, LEDC_HS_SIG_OUT0_IDX + ledc_channel, 0, 0);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t ledc_update_duty(ledc_mode_t speed_mode, ledc_channel_t channel)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(channel <= LEDC_CHANNEL_7, "ledc channel error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
LEDC.channel_group[speed_mode].channel[channel].conf0.sig_out_en = 1;
|
|
LEDC.channel_group[speed_mode].channel[channel].conf1.duty_start = 1;
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t ledc_stop(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t idle_level)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(channel <= LEDC_CHANNEL_7, "ledc channel error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
LEDC.channel_group[speed_mode].channel[channel].conf0.idle_lv = idle_level & 0x1;
|
|
LEDC.channel_group[speed_mode].channel[channel].conf0.sig_out_en = 0;
|
|
LEDC.channel_group[speed_mode].channel[channel].conf1.duty_start = 0;
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return ESP_OK;
|
|
}
|
|
esp_err_t ledc_set_fade(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty, ledc_duty_direction_t fade_direction,
|
|
uint32_t step_num, uint32_t duty_cyle_num, uint32_t duty_scale)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(channel <= LEDC_CHANNEL_7, "ledc channel error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(fade_direction <= LEDC_DUTY_DIR_INCREASE, "ledc fade direction error", ESP_ERR_INVALID_ARG);
|
|
if(step_num > LEDC_DUTY_NUM_HSCH0_V || duty_cyle_num > LEDC_DUTY_CYCLE_HSCH0_V || duty_scale > LEDC_DUTY_SCALE_HSCH0_V) {
|
|
ESP_LOGE(LEDC_TAG, "step_num=%u duty_cyle_num=%u duty_scale=%u", step_num, duty_cyle_num, duty_scale);
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
ledc_duty_config(speed_mode,
|
|
channel, //uint32_t chan_num,
|
|
0, //uint32_t hpoint_val,
|
|
duty << 4, //uint32_t duty_val,the least 4 bits are decimal part
|
|
fade_direction, //uint32_t increase,
|
|
step_num, //uint32_t duty_num,
|
|
duty_cyle_num, //uint32_t duty_cycle,
|
|
duty_scale //uint32_t duty_scale
|
|
);
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t ledc_set_duty(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
LEDC_CHECK(channel <= LEDC_CHANNEL_7, "ledc channel error", ESP_ERR_INVALID_ARG);
|
|
ledc_duty_config(speed_mode,
|
|
channel, //uint32_t chan_num,
|
|
0, //uint32_t hpoint_val,
|
|
duty << 4, //uint32_t duty_val,the least 4 bits are decimal part
|
|
1, //uint32_t increase,
|
|
1, //uint32_t duty_num,
|
|
1, //uint32_t duty_cycle,
|
|
0 //uint32_t duty_scale
|
|
);
|
|
return ESP_OK;
|
|
}
|
|
|
|
int ledc_get_duty(ledc_mode_t speed_mode, ledc_channel_t channel)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", (-1));
|
|
uint32_t duty = (LEDC.channel_group[speed_mode].channel[channel].duty_rd.duty_read >> 4);
|
|
return duty;
|
|
}
|
|
|
|
esp_err_t ledc_set_freq(ledc_mode_t speed_mode, ledc_timer_t timer_num, uint32_t freq_hz)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", ESP_ERR_INVALID_ARG);
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
esp_err_t ret = ESP_OK;
|
|
uint32_t div_num = 0;
|
|
uint32_t bit_num = LEDC.timer_group[speed_mode].timer[timer_num].conf.bit_num;
|
|
uint32_t timer_source_clk = LEDC.timer_group[speed_mode].timer[timer_num].conf.tick_sel;
|
|
uint32_t precision = (0x1 << bit_num);
|
|
if(timer_source_clk == LEDC_APB_CLK) {
|
|
div_num = ((uint64_t) LEDC_APB_CLK_HZ << 8) / freq_hz / precision;
|
|
} else {
|
|
div_num = ((uint64_t) LEDC_REF_CLK_HZ << 8) / freq_hz / precision;
|
|
}
|
|
if(div_num <= 256 || div_num > LEDC_DIV_NUM_HSTIMER0) {
|
|
ESP_LOGE(LEDC_TAG, "div param err,div_param=%u", div_num);
|
|
ret = ESP_FAIL;
|
|
}
|
|
LEDC.timer_group[speed_mode].timer[timer_num].conf.div_num = div_num;
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return ret;
|
|
}
|
|
|
|
uint32_t ledc_get_freq(ledc_mode_t speed_mode, ledc_timer_t timer_num)
|
|
{
|
|
LEDC_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "ledc mode error", (0));
|
|
portENTER_CRITICAL(&ledc_spinlock);
|
|
uint32_t freq = 0;
|
|
uint32_t timer_source_clk = LEDC.timer_group[speed_mode].timer[timer_num].conf.tick_sel;
|
|
uint32_t bit_num = LEDC.timer_group[speed_mode].timer[timer_num].conf.bit_num;
|
|
uint32_t div_num = LEDC.timer_group[speed_mode].timer[timer_num].conf.div_num;
|
|
uint32_t precision = (0x1 << bit_num);
|
|
if(timer_source_clk == LEDC_APB_CLK) {
|
|
freq = ((uint64_t) LEDC_APB_CLK_HZ << 8) / precision / div_num;
|
|
} else {
|
|
freq = ((uint64_t) LEDC_REF_CLK_HZ << 8) / precision / div_num;
|
|
}
|
|
portEXIT_CRITICAL(&ledc_spinlock);
|
|
return freq;
|
|
}
|