mirror of
https://github.com/espressif/esp-idf.git
synced 2025-11-03 16:41:44 +01:00
62 lines
2.7 KiB
ReStructuredText
62 lines
2.7 KiB
ReStructuredText
Temperature Sensor
|
|
===================
|
|
|
|
Overview
|
|
--------
|
|
|
|
The {IDF_TARGET_NAME} has a built-in temperature sensor used to measure the chip's internal temperature, and hard to measure the environmental temperature accurately. Being built-in means that the temperature sensor should work on any {IDF_TARGET_NAME} regardless of what board the chip is embedded in. The temperature sensor module contains an 8-bit Sigma-Delta ADC and a temperature offset DAC.
|
|
|
|
The conversion relationship is the first columns of the table below. Among them, offset = 0 is the main measurement option, and other values are extended measurement options.
|
|
|
|
+--------+------------------------+------------------------+
|
|
| offset | measure range(Celsius) | measure error(Celsius) |
|
|
+========+========================+========================+
|
|
| -2 | 50 ~ 125 | < 3 |
|
|
+--------+------------------------+------------------------+
|
|
| -1 | 20 ~ 100 | < 2 |
|
|
+--------+------------------------+------------------------+
|
|
| 0 | -10 ~ 80 | < 1 |
|
|
+--------+------------------------+------------------------+
|
|
| 1 | -30 ~ 50 | < 2 |
|
|
+--------+------------------------+------------------------+
|
|
| 2 | -40 ~ 20 | < 3 |
|
|
+--------+------------------------+------------------------+
|
|
|
|
Driver Usage
|
|
------------
|
|
|
|
1. Initialize the temperature sensor by calling the function :cpp:func:`temp_sensor_set_config` and pass to it a :cpp:type:`temp_sensor_config_t` structure. The :cpp:type:`temp_sensor_config_t` structure should contain all the required parameters. See the example below.
|
|
|
|
.. code-block:: c
|
|
|
|
temp_sensor_config_t temp_sensor = {
|
|
.dac_offset = TSENS_DAC_L2,
|
|
.clk_div = 6,
|
|
};
|
|
temp_sensor_set_config(temp_sensor);
|
|
|
|
2. Start the temp_sensor by calling :cpp:func:'temp_sensor_start'. The temperature sensor will now measure the temperature.
|
|
|
|
3. To get the current temperature, take the example below as a reference, the value you get is in Celsius.
|
|
|
|
.. code-block:: c
|
|
|
|
float tsens_out;
|
|
temp_sensor_read_celsius(&tsens_out);
|
|
|
|
4. To stop the temperature sensor, please call :cpp:func:'temp_sensor_stop'.
|
|
|
|
.. note::
|
|
|
|
If you want dynamic reconfiguration, you need to stop the sensor first (temp_sensor_stop), set the new configuration (temp_sensor_set_config), then start the sensor again (temp_sensor_start).
|
|
|
|
Application Example
|
|
-------------------
|
|
|
|
Temperature sensor reading example: :example:`peripherals/temp_sensor`.
|
|
|
|
API Reference - Normal Temp Sensor
|
|
----------------------------------
|
|
|
|
.. include-build-file:: inc/temp_sensor.inc
|