mirror of
				https://github.com/espressif/esp-idf.git
				synced 2025-11-04 00:51:42 +01:00 
			
		
		
		
	
		
			
				
	
	
		
			535 lines
		
	
	
		
			22 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			535 lines
		
	
	
		
			22 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
/*
 | 
						|
 * SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
 | 
						|
 *
 | 
						|
 * SPDX-License-Identifier: Apache-2.0
 | 
						|
 */
 | 
						|
#include <stdio.h>
 | 
						|
#include <unistd.h>
 | 
						|
#include "unity.h"
 | 
						|
#include "test_utils.h"
 | 
						|
#include "freertos/FreeRTOS.h"
 | 
						|
#include "freertos/task.h"
 | 
						|
#include "soc/soc_caps.h"
 | 
						|
#include "hal/gpio_hal.h"
 | 
						|
#include "esp_rom_gpio.h"
 | 
						|
#include "soc/rtc.h"
 | 
						|
#if SOC_MCPWM_SUPPORTED
 | 
						|
#include "soc/mcpwm_periph.h"
 | 
						|
#include "driver/pcnt.h"
 | 
						|
#include "driver/mcpwm.h"
 | 
						|
#include "driver/gpio.h"
 | 
						|
 | 
						|
#define TEST_PWMA_PCNT_UNIT (0)
 | 
						|
#define TEST_PWMB_PCNT_UNIT (1)
 | 
						|
#define TEST_PWMA_GPIO (2)
 | 
						|
#define TEST_PWMB_GPIO (4)
 | 
						|
#define TEST_FAULT_GPIO (21)
 | 
						|
#define TEST_SYNC_GPIO_0 (21)
 | 
						|
#define TEST_SYNC_GPIO_1 (18)
 | 
						|
#define TEST_SYNC_GPIO_2 (19)
 | 
						|
#define TEST_CAP_GPIO (21)
 | 
						|
 | 
						|
#define MCPWM_TEST_GROUP_CLK_HZ (SOC_MCPWM_BASE_CLK_HZ / 16)
 | 
						|
#define MCPWM_TEST_TIMER_CLK_HZ (MCPWM_TEST_GROUP_CLK_HZ / 10)
 | 
						|
 | 
						|
const static mcpwm_io_signals_t pwma[] = {MCPWM0A, MCPWM1A, MCPWM2A};
 | 
						|
const static mcpwm_io_signals_t pwmb[] = {MCPWM0B, MCPWM1B, MCPWM2B};
 | 
						|
const static mcpwm_fault_signal_t fault_sig_array[] = {MCPWM_SELECT_F0, MCPWM_SELECT_F1, MCPWM_SELECT_F2};
 | 
						|
const static mcpwm_io_signals_t fault_io_sig_array[] = {MCPWM_FAULT_0, MCPWM_FAULT_1, MCPWM_FAULT_2};
 | 
						|
const static mcpwm_sync_signal_t sync_sig_array[] = {MCPWM_SELECT_GPIO_SYNC0, MCPWM_SELECT_GPIO_SYNC1, MCPWM_SELECT_GPIO_SYNC2};
 | 
						|
const static mcpwm_io_signals_t sync_io_sig_array[] = {MCPWM_SYNC_0, MCPWM_SYNC_1, MCPWM_SYNC_2};
 | 
						|
const static mcpwm_capture_signal_t cap_sig_array[] = {MCPWM_SELECT_CAP0, MCPWM_SELECT_CAP1, MCPWM_SELECT_CAP2};
 | 
						|
const static mcpwm_io_signals_t cap_io_sig_array[] = {MCPWM_CAP_0, MCPWM_CAP_1, MCPWM_CAP_2};
 | 
						|
 | 
						|
// This GPIO init function is almost the same to public API `mcpwm_gpio_init()`, except that
 | 
						|
// this function will configure all MCPWM GPIOs into output and input capable
 | 
						|
// which is useful to simulate a trigger source
 | 
						|
static esp_err_t test_mcpwm_gpio_init(mcpwm_unit_t mcpwm_num, mcpwm_io_signals_t io_signal, int gpio_num)
 | 
						|
{
 | 
						|
    if (gpio_num < 0) { // ignore on minus gpio number
 | 
						|
        return ESP_OK;
 | 
						|
    }
 | 
						|
 | 
						|
    if (io_signal <= MCPWM2B) { // Generator output signal
 | 
						|
        gpio_set_direction(gpio_num, GPIO_MODE_INPUT_OUTPUT);
 | 
						|
        int operator_id = io_signal / 2;
 | 
						|
        int generator_id = io_signal % 2;
 | 
						|
        esp_rom_gpio_connect_out_signal(gpio_num, mcpwm_periph_signals.groups[mcpwm_num].operators[operator_id].generators[generator_id].pwm_sig, 0, 0);
 | 
						|
    } else if (io_signal <= MCPWM_SYNC_2) { // External sync input signal
 | 
						|
        gpio_set_direction(gpio_num, GPIO_MODE_INPUT_OUTPUT);
 | 
						|
        int gpio_sync_id = io_signal - MCPWM_SYNC_0;
 | 
						|
        esp_rom_gpio_connect_in_signal(gpio_num, mcpwm_periph_signals.groups[mcpwm_num].gpio_synchros[gpio_sync_id].sync_sig, 0);
 | 
						|
    } else if (io_signal <= MCPWM_FAULT_2) { // Fault input signal
 | 
						|
        gpio_set_direction(gpio_num, GPIO_MODE_INPUT_OUTPUT);
 | 
						|
        int fault_id = io_signal - MCPWM_FAULT_0;
 | 
						|
        esp_rom_gpio_connect_in_signal(gpio_num, mcpwm_periph_signals.groups[mcpwm_num].gpio_faults[fault_id].fault_sig, 0);
 | 
						|
    } else if (io_signal >= MCPWM_CAP_0 && io_signal <= MCPWM_CAP_2) { // Capture input signal
 | 
						|
        gpio_set_direction(gpio_num, GPIO_MODE_INPUT_OUTPUT);
 | 
						|
        int capture_id = io_signal - MCPWM_CAP_0;
 | 
						|
        esp_rom_gpio_connect_in_signal(gpio_num, mcpwm_periph_signals.groups[mcpwm_num].captures[capture_id].cap_sig, 0);
 | 
						|
    }
 | 
						|
    gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[gpio_num], PIN_FUNC_GPIO);
 | 
						|
    return ESP_OK;
 | 
						|
}
 | 
						|
 | 
						|
static void mcpwm_setup_testbench(mcpwm_unit_t group, mcpwm_timer_t timer, uint32_t pwm_freq, float pwm_duty,
 | 
						|
                                  unsigned long int group_resolution, unsigned long int timer_resolution)
 | 
						|
{
 | 
						|
    // PWMA <--> PCNT UNIT0
 | 
						|
    pcnt_config_t pcnt_config = {
 | 
						|
        .pulse_gpio_num = TEST_PWMA_GPIO,
 | 
						|
        .ctrl_gpio_num = -1,       // don't care level signal
 | 
						|
        .channel = PCNT_CHANNEL_0,
 | 
						|
        .unit = TEST_PWMA_PCNT_UNIT,
 | 
						|
        .pos_mode = PCNT_COUNT_INC,
 | 
						|
        .neg_mode = PCNT_COUNT_DIS,
 | 
						|
        .lctrl_mode = PCNT_MODE_KEEP,
 | 
						|
        .hctrl_mode = PCNT_MODE_KEEP,
 | 
						|
        .counter_h_lim = 10000,
 | 
						|
        .counter_l_lim = -10000,
 | 
						|
    };
 | 
						|
    TEST_ESP_OK(pcnt_unit_config(&pcnt_config));
 | 
						|
    mcpwm_io_signals_t mcpwm_a = pwma[timer];
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(group, mcpwm_a, TEST_PWMA_GPIO));
 | 
						|
    // PWMB <--> PCNT UNIT1
 | 
						|
    pcnt_config.pulse_gpio_num = TEST_PWMB_GPIO;
 | 
						|
    pcnt_config.unit = TEST_PWMB_PCNT_UNIT;
 | 
						|
    TEST_ESP_OK(pcnt_unit_config(&pcnt_config));
 | 
						|
    mcpwm_io_signals_t mcpwm_b = pwmb[timer];
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(group, mcpwm_b, TEST_PWMB_GPIO));
 | 
						|
 | 
						|
    // Set PWM freq and duty, start immediately
 | 
						|
    mcpwm_config_t pwm_config = {
 | 
						|
        .frequency = pwm_freq,
 | 
						|
        .cmpr_a = pwm_duty,
 | 
						|
        .cmpr_b = pwm_duty,
 | 
						|
        .counter_mode = MCPWM_UP_COUNTER,
 | 
						|
        .duty_mode = MCPWM_DUTY_MODE_0,
 | 
						|
    };
 | 
						|
    mcpwm_group_set_resolution(group, group_resolution);
 | 
						|
    mcpwm_timer_set_resolution(group, timer, timer_resolution);
 | 
						|
    TEST_ESP_OK(mcpwm_init(group, timer, &pwm_config));
 | 
						|
}
 | 
						|
 | 
						|
static uint32_t mcpwm_pcnt_get_pulse_number(pcnt_unit_t pwm_pcnt_unit, int capture_window_ms)
 | 
						|
{
 | 
						|
    int16_t count_value = 0;
 | 
						|
    TEST_ESP_OK(pcnt_counter_pause(pwm_pcnt_unit));
 | 
						|
    TEST_ESP_OK(pcnt_counter_clear(pwm_pcnt_unit));
 | 
						|
    TEST_ESP_OK(pcnt_counter_resume(pwm_pcnt_unit));
 | 
						|
    usleep(capture_window_ms * 1000);
 | 
						|
    TEST_ESP_OK(pcnt_get_counter_value(pwm_pcnt_unit, &count_value));
 | 
						|
    printf("count value: %d\r\n", count_value);
 | 
						|
    return (uint32_t)count_value;
 | 
						|
}
 | 
						|
 | 
						|
static void mcpwm_timer_duty_test(mcpwm_unit_t unit, mcpwm_timer_t timer, unsigned long int group_resolution, unsigned long int timer_resolution)
 | 
						|
{
 | 
						|
    mcpwm_setup_testbench(unit, timer, 1000, 50.0, group_resolution, timer_resolution);
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(100));
 | 
						|
 | 
						|
    TEST_ESP_OK(mcpwm_set_duty(unit, timer, MCPWM_OPR_A, 10.0));
 | 
						|
    TEST_ESP_OK(mcpwm_set_duty(unit, timer, MCPWM_OPR_B, 20.0));
 | 
						|
    TEST_ASSERT_FLOAT_WITHIN(0.1, 10.0, mcpwm_get_duty(unit, timer, MCPWM_OPR_A));
 | 
						|
    TEST_ASSERT_FLOAT_WITHIN(0.1, 20.0, mcpwm_get_duty(unit, timer, MCPWM_OPR_B));
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(100));
 | 
						|
 | 
						|
    TEST_ESP_OK(mcpwm_set_duty(unit, timer, MCPWM_OPR_A, 55.5f));
 | 
						|
    TEST_ESP_OK(mcpwm_set_duty_type(unit, timer, MCPWM_OPR_A, MCPWM_DUTY_MODE_0));
 | 
						|
    TEST_ASSERT_FLOAT_WITHIN(0.1, 55.5, mcpwm_get_duty(unit, timer, MCPWM_OPR_A));
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(100));
 | 
						|
 | 
						|
    TEST_ESP_OK(mcpwm_set_duty_in_us(unit, timer, MCPWM_OPR_B, 500));
 | 
						|
    TEST_ASSERT_INT_WITHIN(5, 500, mcpwm_get_duty_in_us(unit, timer, MCPWM_OPR_B));
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(100));
 | 
						|
 | 
						|
    TEST_ESP_OK(mcpwm_stop(unit, timer));
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(100));
 | 
						|
}
 | 
						|
 | 
						|
TEST_CASE("MCPWM duty test", "[mcpwm]")
 | 
						|
{
 | 
						|
    for (int i = 0; i < SOC_MCPWM_GROUPS; i++) {
 | 
						|
        for (int j = 0; j < SOC_MCPWM_TIMERS_PER_GROUP; j++) {
 | 
						|
            mcpwm_timer_duty_test(i, j, MCPWM_TEST_GROUP_CLK_HZ, MCPWM_TEST_TIMER_CLK_HZ);
 | 
						|
            mcpwm_timer_duty_test(i, j, MCPWM_TEST_GROUP_CLK_HZ / 2, MCPWM_TEST_TIMER_CLK_HZ * 2);
 | 
						|
        }
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
// -------------------------------------------------------------------------------------
 | 
						|
 | 
						|
static void mcpwm_start_stop_test(mcpwm_unit_t unit, mcpwm_timer_t timer)
 | 
						|
{
 | 
						|
    uint32_t pulse_number = 0;
 | 
						|
 | 
						|
    mcpwm_setup_testbench(unit, timer, 1000, 50.0, MCPWM_TEST_GROUP_CLK_HZ, MCPWM_TEST_TIMER_CLK_HZ); // Period: 1000us, 1ms
 | 
						|
    // count the pulse number within 100ms
 | 
						|
    pulse_number = mcpwm_pcnt_get_pulse_number(TEST_PWMA_PCNT_UNIT, 100);
 | 
						|
    TEST_ASSERT_INT_WITHIN(2, 100, pulse_number);
 | 
						|
    pulse_number = mcpwm_pcnt_get_pulse_number(TEST_PWMB_PCNT_UNIT, 100);
 | 
						|
    TEST_ASSERT_INT_WITHIN(2, 100, pulse_number);
 | 
						|
 | 
						|
    TEST_ESP_OK(mcpwm_set_frequency(unit, timer, 100));
 | 
						|
    pulse_number = mcpwm_pcnt_get_pulse_number(TEST_PWMB_PCNT_UNIT, 100);
 | 
						|
    TEST_ASSERT_INT_WITHIN(2, 10, pulse_number);
 | 
						|
 | 
						|
    // stop timer, then no pwm pulse should be generating
 | 
						|
    TEST_ESP_OK(mcpwm_stop(unit, timer));
 | 
						|
    usleep(10000); // wait until timer stopped
 | 
						|
    pulse_number = mcpwm_pcnt_get_pulse_number(TEST_PWMA_PCNT_UNIT, 100);
 | 
						|
    TEST_ASSERT_INT_WITHIN(2, 0, pulse_number);
 | 
						|
    pulse_number = mcpwm_pcnt_get_pulse_number(TEST_PWMB_PCNT_UNIT, 100);
 | 
						|
    TEST_ASSERT_INT_WITHIN(2, 0, pulse_number);
 | 
						|
}
 | 
						|
 | 
						|
TEST_CASE("MCPWM start and stop test", "[mcpwm]")
 | 
						|
{
 | 
						|
    for (int i = 0; i < SOC_MCPWM_GROUPS; i++) {
 | 
						|
        for (int j = 0; j < SOC_MCPWM_TIMERS_PER_GROUP; j++) {
 | 
						|
            mcpwm_start_stop_test(i, j);
 | 
						|
        }
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
// -------------------------------------------------------------------------------------
 | 
						|
 | 
						|
static void mcpwm_deadtime_test(mcpwm_unit_t unit, mcpwm_timer_t timer)
 | 
						|
{
 | 
						|
    mcpwm_setup_testbench(unit, timer, 1000, 50.0, MCPWM_TEST_GROUP_CLK_HZ, MCPWM_TEST_TIMER_CLK_HZ); // Period: 1000us, 1ms
 | 
						|
    mcpwm_deadtime_type_t deadtime_type[] = {MCPWM_BYPASS_RED, MCPWM_BYPASS_FED, MCPWM_ACTIVE_HIGH_MODE,
 | 
						|
                                             MCPWM_ACTIVE_LOW_MODE, MCPWM_ACTIVE_HIGH_COMPLIMENT_MODE, MCPWM_ACTIVE_LOW_COMPLIMENT_MODE,
 | 
						|
                                             MCPWM_ACTIVE_RED_FED_FROM_PWMXA, MCPWM_ACTIVE_RED_FED_FROM_PWMXB
 | 
						|
                                            };
 | 
						|
 | 
						|
    for (size_t i = 0; i < sizeof(deadtime_type) / sizeof(deadtime_type[0]); i++) {
 | 
						|
        mcpwm_stop(unit, timer);
 | 
						|
        usleep(10000);
 | 
						|
        mcpwm_deadtime_enable(unit, timer, deadtime_type[i], 1000, 1000);
 | 
						|
        mcpwm_start(unit, timer);
 | 
						|
        vTaskDelay(pdMS_TO_TICKS(100));
 | 
						|
        mcpwm_deadtime_disable(unit, timer);
 | 
						|
    }
 | 
						|
    mcpwm_stop(unit, timer);
 | 
						|
}
 | 
						|
 | 
						|
TEST_CASE("MCPWM deadtime test", "[mcpwm]")
 | 
						|
{
 | 
						|
    for (int i = 0; i < SOC_MCPWM_GROUPS; i++) {
 | 
						|
        for (int j = 0; j < SOC_MCPWM_TIMERS_PER_GROUP; j++) {
 | 
						|
            mcpwm_deadtime_test(i, j);
 | 
						|
        }
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
// -------------------------------------------------------------------------------------
 | 
						|
 | 
						|
static void mcpwm_carrier_test(mcpwm_unit_t unit, mcpwm_timer_t timer, mcpwm_carrier_out_ivt_t invert_or_not,
 | 
						|
                               uint8_t period, uint8_t duty, uint8_t os_width)
 | 
						|
{
 | 
						|
    uint32_t pulse_number = 0;
 | 
						|
 | 
						|
    mcpwm_setup_testbench(unit, timer, 1000, 50.0, MCPWM_TEST_GROUP_CLK_HZ, MCPWM_TEST_TIMER_CLK_HZ);
 | 
						|
    mcpwm_set_signal_high(unit, timer, MCPWM_GEN_A);
 | 
						|
    mcpwm_set_signal_high(unit, timer, MCPWM_GEN_B);
 | 
						|
    TEST_ESP_OK(mcpwm_carrier_enable(unit, timer));
 | 
						|
    TEST_ESP_OK(mcpwm_carrier_set_period(unit, timer, period));   //carrier revolution
 | 
						|
    TEST_ESP_OK(mcpwm_carrier_set_duty_cycle(unit, timer, duty)); // carrier duty
 | 
						|
    TEST_ESP_OK(mcpwm_carrier_output_invert(unit, timer, invert_or_not));
 | 
						|
    TEST_ESP_OK(mcpwm_carrier_oneshot_mode_enable(unit, timer, os_width));
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(100));
 | 
						|
 | 
						|
    pulse_number = mcpwm_pcnt_get_pulse_number(TEST_PWMA_PCNT_UNIT, 10);
 | 
						|
    TEST_ASSERT_INT_WITHIN(50, 2500, pulse_number);
 | 
						|
    usleep(10000);
 | 
						|
    pulse_number = mcpwm_pcnt_get_pulse_number(TEST_PWMB_PCNT_UNIT, 10);
 | 
						|
    TEST_ASSERT_INT_WITHIN(50, 2500, pulse_number);
 | 
						|
 | 
						|
    TEST_ESP_OK(mcpwm_carrier_disable(unit, timer));
 | 
						|
    TEST_ESP_OK(mcpwm_stop(unit, timer));
 | 
						|
}
 | 
						|
 | 
						|
TEST_CASE("MCPWM carrier test", "[mcpwm]")
 | 
						|
{
 | 
						|
    for (int i = 0; i < SOC_MCPWM_GROUPS; i++) {
 | 
						|
        for (int j = 0; j < SOC_MCPWM_TIMERS_PER_GROUP; j++) {
 | 
						|
            // carrier should be 10MHz/8/(4+1) = 250KHz, (10MHz is the group resolution, it's fixed in the driver), carrier duty cycle is 4/8 = 50%
 | 
						|
            mcpwm_carrier_test(i, j, MCPWM_CARRIER_OUT_IVT_DIS, 4, 4, 3);
 | 
						|
            mcpwm_carrier_test(i, j, MCPWM_CARRIER_OUT_IVT_EN, 4, 4, 3);
 | 
						|
        }
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
// -------------------------------------------------------------------------------------
 | 
						|
 | 
						|
static void mcpwm_check_generator_level_on_fault(mcpwm_action_on_pwmxa_t action_a, mcpwm_action_on_pwmxb_t action_b)
 | 
						|
{
 | 
						|
    if (action_a == MCPWM_ACTION_FORCE_LOW) {
 | 
						|
        TEST_ASSERT_EQUAL(0, gpio_get_level(TEST_PWMA_GPIO));
 | 
						|
    } else if (action_a == MCPWM_ACTION_FORCE_HIGH) {
 | 
						|
        TEST_ASSERT_EQUAL(1, gpio_get_level(TEST_PWMA_GPIO));
 | 
						|
    }
 | 
						|
 | 
						|
    if (action_b == MCPWM_ACTION_FORCE_LOW) {
 | 
						|
        TEST_ASSERT_EQUAL(0, gpio_get_level(TEST_PWMB_GPIO));
 | 
						|
    } else if (action_b == MCPWM_ACTION_FORCE_HIGH) {
 | 
						|
        TEST_ASSERT_EQUAL(1, gpio_get_level(TEST_PWMB_GPIO));
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
static void mcpwm_fault_cbc_test(mcpwm_unit_t unit, mcpwm_timer_t timer)
 | 
						|
{
 | 
						|
    mcpwm_action_on_pwmxa_t action_a[] = {MCPWM_ACTION_FORCE_LOW, MCPWM_ACTION_FORCE_HIGH};
 | 
						|
    mcpwm_action_on_pwmxb_t action_b[] = {MCPWM_ACTION_FORCE_LOW, MCPWM_ACTION_FORCE_HIGH};
 | 
						|
 | 
						|
    mcpwm_fault_signal_t fault_sig = fault_sig_array[timer];
 | 
						|
    mcpwm_io_signals_t fault_io_sig = fault_io_sig_array[timer];
 | 
						|
 | 
						|
    mcpwm_setup_testbench(unit, timer, 1000, 50.0, MCPWM_TEST_GROUP_CLK_HZ, MCPWM_TEST_TIMER_CLK_HZ);
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(unit, fault_io_sig, TEST_FAULT_GPIO));
 | 
						|
    gpio_set_level(TEST_FAULT_GPIO, 0);
 | 
						|
    TEST_ESP_OK(mcpwm_fault_init(unit, MCPWM_HIGH_LEVEL_TGR, fault_sig));
 | 
						|
    for (int i = 0; i < sizeof(action_a) / sizeof(action_a[0]); i++) {
 | 
						|
        for (int j = 0; j < sizeof(action_b) / sizeof(action_b[0]); j++) {
 | 
						|
            TEST_ESP_OK(mcpwm_fault_set_cyc_mode(unit, timer, fault_sig, action_a[i], action_b[j]));
 | 
						|
            gpio_set_level(TEST_FAULT_GPIO, 1); // trigger the fault event
 | 
						|
            usleep(10000);
 | 
						|
            mcpwm_check_generator_level_on_fault(action_a[i], action_b[j]);
 | 
						|
            gpio_set_level(TEST_FAULT_GPIO, 0); // remove the fault signal
 | 
						|
            usleep(10000);
 | 
						|
        }
 | 
						|
    }
 | 
						|
    TEST_ESP_OK(mcpwm_fault_deinit(unit, fault_sig));
 | 
						|
}
 | 
						|
 | 
						|
TEST_CASE("MCPWM fault cbc test", "[mcpwm]")
 | 
						|
{
 | 
						|
    for (int i = 0; i < SOC_MCPWM_GROUPS; i++) {
 | 
						|
        for (int j = 0; j < SOC_MCPWM_TIMERS_PER_GROUP; j++) {
 | 
						|
            mcpwm_fault_cbc_test(i, j);
 | 
						|
        }
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
// -------------------------------------------------------------------------------------
 | 
						|
 | 
						|
static void mcpwm_fault_ost_test(mcpwm_unit_t unit, mcpwm_timer_t timer)
 | 
						|
{
 | 
						|
    mcpwm_action_on_pwmxa_t action_a[] = {MCPWM_ACTION_FORCE_LOW, MCPWM_ACTION_FORCE_HIGH};
 | 
						|
    mcpwm_action_on_pwmxb_t action_b[] = {MCPWM_ACTION_FORCE_LOW, MCPWM_ACTION_FORCE_HIGH};
 | 
						|
 | 
						|
    mcpwm_fault_signal_t fault_sig = fault_sig_array[timer];
 | 
						|
    mcpwm_io_signals_t fault_io_sig = fault_io_sig_array[timer];
 | 
						|
 | 
						|
    mcpwm_setup_testbench(unit, timer, 1000, 50.0, MCPWM_TEST_GROUP_CLK_HZ, MCPWM_TEST_TIMER_CLK_HZ);
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(unit, fault_io_sig, TEST_FAULT_GPIO));
 | 
						|
    gpio_set_level(TEST_FAULT_GPIO, 0);
 | 
						|
    TEST_ESP_OK(mcpwm_fault_init(unit, MCPWM_HIGH_LEVEL_TGR, fault_sig));
 | 
						|
    for (int i = 0; i < sizeof(action_a) / sizeof(action_a[0]); i++) {
 | 
						|
        for (int j = 0; j < sizeof(action_b) / sizeof(action_b[0]); j++) {
 | 
						|
            TEST_ESP_OK(mcpwm_fault_set_oneshot_mode(unit, timer, fault_sig, action_a[i], action_b[j]));
 | 
						|
            gpio_set_level(TEST_FAULT_GPIO, 1); // trigger the fault event
 | 
						|
            usleep(10000);
 | 
						|
            mcpwm_check_generator_level_on_fault(action_a[i], action_b[j]);
 | 
						|
            gpio_set_level(TEST_FAULT_GPIO, 0); // remove the fault signal
 | 
						|
            usleep(10000);
 | 
						|
        }
 | 
						|
    }
 | 
						|
    TEST_ESP_OK(mcpwm_fault_deinit(unit, fault_sig));
 | 
						|
}
 | 
						|
 | 
						|
TEST_CASE("MCPWM fault ost test", "[mcpwm]")
 | 
						|
{
 | 
						|
    for (int i = 0; i < SOC_MCPWM_GROUPS; i++) {
 | 
						|
        for (int j = 0; j < SOC_MCPWM_TIMERS_PER_GROUP; j++) {
 | 
						|
            mcpwm_fault_ost_test(i, j);
 | 
						|
        }
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
// -------------------------------------------------------------------------------------
 | 
						|
 | 
						|
static void mcpwm_sync_test(mcpwm_unit_t unit, mcpwm_timer_t timer)
 | 
						|
{
 | 
						|
    mcpwm_sync_signal_t sync_sig = sync_sig_array[timer];
 | 
						|
    mcpwm_io_signals_t sync_io_sig = sync_io_sig_array[timer];
 | 
						|
 | 
						|
    mcpwm_setup_testbench(unit, timer, 1000, 50.0, MCPWM_TEST_GROUP_CLK_HZ, MCPWM_TEST_TIMER_CLK_HZ);
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(unit, sync_io_sig, TEST_SYNC_GPIO_0));
 | 
						|
    gpio_set_level(TEST_SYNC_GPIO_0, 0);
 | 
						|
 | 
						|
    mcpwm_sync_config_t sync_conf = {
 | 
						|
        .sync_sig = sync_sig,
 | 
						|
        .timer_val = 200,
 | 
						|
        .count_direction = MCPWM_TIMER_DIRECTION_UP,
 | 
						|
    };
 | 
						|
    TEST_ESP_OK(mcpwm_sync_configure(unit, timer, &sync_conf));
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(50));
 | 
						|
    gpio_set_level(TEST_SYNC_GPIO_0, 1); // trigger an external sync event
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(50));
 | 
						|
    mcpwm_timer_trigger_soft_sync(unit, timer);  // trigger a software sync event
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(50));
 | 
						|
    TEST_ESP_OK(mcpwm_sync_disable(unit, timer));
 | 
						|
    TEST_ESP_OK(mcpwm_stop(unit, timer));
 | 
						|
}
 | 
						|
 | 
						|
TEST_CASE("MCPWM timer GPIO sync test", "[mcpwm]")
 | 
						|
{
 | 
						|
    for (int i = 0; i < SOC_MCPWM_GROUPS; i++) {
 | 
						|
        for (int j = 0; j < SOC_MCPWM_TIMERS_PER_GROUP; j++) {
 | 
						|
            mcpwm_sync_test(i, j);
 | 
						|
        }
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
static void mcpwm_swsync_test(mcpwm_unit_t unit) {
 | 
						|
    const uint32_t test_sync_phase = 20;
 | 
						|
    // used only in this area but need to be reset every time. mutex is not needed
 | 
						|
    // store timestamps captured from ISR callback
 | 
						|
    static uint64_t cap_timestamp[3];
 | 
						|
    cap_timestamp[0] = 0;
 | 
						|
    cap_timestamp[1] = 0;
 | 
						|
    cap_timestamp[2] = 0;
 | 
						|
    // control the start of capture to avoid unstable data
 | 
						|
    static volatile bool log_cap;
 | 
						|
    log_cap = false;
 | 
						|
 | 
						|
    // cb function, to update capture value
 | 
						|
    // only log when channel1 comes at first, then channel2, and do not log further more.
 | 
						|
    bool capture_callback(mcpwm_unit_t mcpwm, mcpwm_capture_channel_id_t cap_channel, const cap_event_data_t *edata,
 | 
						|
                          void *user_data) {
 | 
						|
        if (log_cap && (cap_timestamp[1] == 0 || cap_timestamp[2] == 0)) {
 | 
						|
            if (cap_channel == MCPWM_SELECT_CAP1 && cap_timestamp[1] == 0) {
 | 
						|
                cap_timestamp[1] = edata->cap_value;
 | 
						|
            }
 | 
						|
            if (cap_channel == MCPWM_SELECT_CAP2 && cap_timestamp[1] != 0) {
 | 
						|
                cap_timestamp[2] = edata->cap_value;
 | 
						|
            }
 | 
						|
        }
 | 
						|
        return false;
 | 
						|
    }
 | 
						|
 | 
						|
    // configure all timer output 10% PWM
 | 
						|
    for (int i = 0; i < 3; ++i) {
 | 
						|
        mcpwm_setup_testbench(unit, i, 1000, 10.0, MCPWM_TEST_GROUP_CLK_HZ, MCPWM_TEST_TIMER_CLK_HZ);
 | 
						|
    }
 | 
						|
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(10));
 | 
						|
 | 
						|
    // configure capture for verification
 | 
						|
    mcpwm_capture_config_t conf = {
 | 
						|
        .cap_edge = MCPWM_POS_EDGE,
 | 
						|
        .cap_prescale = 1,
 | 
						|
        .capture_cb = capture_callback,
 | 
						|
        .user_data = NULL,
 | 
						|
    };
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(unit, MCPWM_CAP_0, TEST_SYNC_GPIO_0));
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(unit, MCPWM_CAP_1, TEST_SYNC_GPIO_1));
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(unit, MCPWM_CAP_2, TEST_SYNC_GPIO_2));
 | 
						|
    TEST_ESP_OK(mcpwm_capture_enable_channel(unit, MCPWM_SELECT_CAP0, &conf));
 | 
						|
    TEST_ESP_OK(mcpwm_capture_enable_channel(unit, MCPWM_SELECT_CAP1, &conf));
 | 
						|
    TEST_ESP_OK(mcpwm_capture_enable_channel(unit, MCPWM_SELECT_CAP2, &conf));
 | 
						|
    // timer0 produce sync sig at TEZ, timer1 and timer2 consume, to make sure last two can be synced precisely
 | 
						|
    // timer1 and timer2 will be synced with TEZ of timer0 at a known phase.
 | 
						|
    mcpwm_sync_config_t sync_conf = {
 | 
						|
        .sync_sig = MCPWM_SELECT_TIMER0_SYNC,
 | 
						|
        .timer_val = 0,
 | 
						|
        .count_direction = MCPWM_TIMER_DIRECTION_UP,
 | 
						|
    };
 | 
						|
    TEST_ESP_OK(mcpwm_sync_configure(unit, MCPWM_TIMER_1, &sync_conf));
 | 
						|
    sync_conf.timer_val = 1000 - test_sync_phase;
 | 
						|
    TEST_ESP_OK(mcpwm_sync_configure(unit, MCPWM_TIMER_2, &sync_conf));
 | 
						|
    TEST_ESP_OK(mcpwm_set_timer_sync_output(unit, MCPWM_TIMER_0, MCPWM_SWSYNC_SOURCE_TEZ));
 | 
						|
    // init gpio at the end
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(unit, MCPWM0A, TEST_SYNC_GPIO_0));
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(unit, MCPWM1A, TEST_SYNC_GPIO_1));
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(unit, MCPWM2A, TEST_SYNC_GPIO_2));
 | 
						|
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(100));
 | 
						|
 | 
						|
    log_cap = true;
 | 
						|
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(100));
 | 
						|
 | 
						|
    uint32_t delta_timestamp_us = (cap_timestamp[2] - cap_timestamp[1]) * 1000000 / rtc_clk_apb_freq_get();
 | 
						|
    uint32_t expected_phase_us = 1000000 / mcpwm_get_frequency(unit, MCPWM_TIMER_0) * test_sync_phase / 1000;
 | 
						|
    // accept +-2 error
 | 
						|
    TEST_ASSERT_UINT32_WITHIN(2, expected_phase_us, delta_timestamp_us);
 | 
						|
 | 
						|
    // tear down
 | 
						|
    for (int i = 0; i < 3; ++i) {
 | 
						|
        TEST_ESP_OK(mcpwm_capture_disable_channel(unit, i));
 | 
						|
        TEST_ESP_OK(mcpwm_sync_disable(unit, i));
 | 
						|
        TEST_ESP_OK(mcpwm_stop(unit, i));
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
TEST_CASE("MCPWM timer swsync test", "[mcpwm]")
 | 
						|
{
 | 
						|
    for (int i = 0; i < SOC_MCPWM_GROUPS; i++) {
 | 
						|
        mcpwm_swsync_test(i);
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
// -------------------------------------------------------------------------------------
 | 
						|
typedef struct {
 | 
						|
    mcpwm_unit_t unit;
 | 
						|
    TaskHandle_t task_hdl;
 | 
						|
} test_capture_callback_data_t;
 | 
						|
 | 
						|
static bool test_mcpwm_intr_handler(mcpwm_unit_t mcpwm, mcpwm_capture_channel_id_t cap_sig, const cap_event_data_t *edata, void *arg) {
 | 
						|
    BaseType_t high_task_wakeup = pdFALSE;
 | 
						|
    test_capture_callback_data_t *cb_data = (test_capture_callback_data_t *)arg;
 | 
						|
    vTaskNotifyGiveFromISR(cb_data->task_hdl, &high_task_wakeup);
 | 
						|
    return high_task_wakeup == pdTRUE;
 | 
						|
}
 | 
						|
 | 
						|
static void mcpwm_capture_test(mcpwm_unit_t unit, mcpwm_capture_signal_t cap_chan)
 | 
						|
{
 | 
						|
    test_capture_callback_data_t callback_data = {
 | 
						|
        .unit = unit,
 | 
						|
        .task_hdl = xTaskGetCurrentTaskHandle(),
 | 
						|
    };
 | 
						|
 | 
						|
    //each timer test the capture sig with the same id with it.
 | 
						|
    mcpwm_io_signals_t cap_io = cap_io_sig_array[cap_chan];
 | 
						|
    mcpwm_capture_channel_id_t cap_channel = cap_sig_array[cap_chan];
 | 
						|
 | 
						|
    TEST_ESP_OK(test_mcpwm_gpio_init(unit, cap_io, TEST_CAP_GPIO));
 | 
						|
    mcpwm_capture_config_t conf = {
 | 
						|
            .cap_edge = MCPWM_POS_EDGE,
 | 
						|
            .cap_prescale = 1,
 | 
						|
            .capture_cb = test_mcpwm_intr_handler,
 | 
						|
            .user_data = &callback_data
 | 
						|
    };
 | 
						|
    TEST_ESP_OK(mcpwm_capture_enable_channel(unit, cap_channel, &conf));
 | 
						|
    // generate an posage
 | 
						|
    gpio_set_level(TEST_CAP_GPIO, 0);
 | 
						|
    gpio_set_level(TEST_CAP_GPIO, 1);
 | 
						|
    vTaskDelay(pdMS_TO_TICKS(100));
 | 
						|
    TEST_ASSERT_NOT_EQUAL(0, ulTaskNotifyTake(pdFALSE, pdMS_TO_TICKS(40)));
 | 
						|
    uint32_t cap_val0 = mcpwm_capture_signal_get_value(unit, cap_chan);
 | 
						|
 | 
						|
    // generate another posage
 | 
						|
    gpio_set_level(TEST_CAP_GPIO, 0);
 | 
						|
    gpio_set_level(TEST_CAP_GPIO, 1);
 | 
						|
    TEST_ASSERT_NOT_EQUAL(0, ulTaskNotifyTake(pdFALSE, pdMS_TO_TICKS(40)));
 | 
						|
    uint32_t cap_val1 = mcpwm_capture_signal_get_value(unit, cap_chan);
 | 
						|
    // capture clock source is APB (80MHz), 100ms means 8000000 ticks
 | 
						|
    TEST_ASSERT_UINT_WITHIN(100000, 8000000, cap_val1 - cap_val0);
 | 
						|
 | 
						|
    TEST_ESP_OK(mcpwm_capture_disable_channel(unit, cap_channel));
 | 
						|
}
 | 
						|
 | 
						|
TEST_CASE("MCPWM capture test", "[mcpwm]")
 | 
						|
{
 | 
						|
    // we assume each group has one capture timer
 | 
						|
    for (int i = 0; i < SOC_MCPWM_GROUPS; i++) {
 | 
						|
        for (int j = 0; j < SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER; j++) {
 | 
						|
            mcpwm_capture_test(i, j);
 | 
						|
        }
 | 
						|
    }
 | 
						|
}
 | 
						|
 | 
						|
#endif // SOC_MCPWM_SUPPORTED
 |