espressif/esp-idf
1
0
Fork 1
mirror of https://github.com/espressif/esp-idf.git synced 2025-11-03 08:31:44 +01:00
Code Issues Packages Projects Releases Wiki Activity
Files
dd1b698075fce81f108ce2c211ce936e2ff79cd9
esp-idf/examples/wifi
History
Nachiket Kukade c3d971c52e esp_wifi: Update wifi lib 
Update wifi lib with below fixes -
1. In FTM Responder, add session timer for cleanup, also remove
   unnecessary mutex locks
2. In FTM Responder, fix incorrect print in case of failure
   while setting up the SofTAP
2. In FTM Initiator, increase FTM Request response timeout to
   avoid failures in noisy environments
3. In FTM Initiator, abort for high start delta time, also fix
   timeout issue in ASAP mode

Closes https://github.com/espressif/esp-idf/issues/7702

Closes https://github.com/espressif/esp-idf/issues/7753
2021-11-25 15:48:53 +05:30
..
espnow
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
fast_scan
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
ftm
esp_wifi: Update wifi lib
2021-11-25 15:48:53 +05:30
getting_started
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
iperf
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
power_save
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
roaming
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
scan
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
smart_config
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
wifi_eap_fast
esp_wifi: Add example code for EAP-FAST.
2021-11-22 17:33:36 +05:30
wifi_easy_connect/dpp-enrollee
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
wifi_enterprise
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
wps
Build & config: Remove leftover files from the unsupported "make" build system
2021-11-11 15:32:36 +01:00
README.md
examples: create a new folder structure for generic network examples
2021-07-26 12:25:19 +02:00

README.md

Wi-Fi Examples

This directory contains a range of examples ESP-IDF projects. These are intended to demonstrate the Wi-Fi functionality, and to provide code that you can copy and adapt into your own projects.

Example Layout

The examples are grouped into sub-directories by category. Each category directory contains one or more example projects:

  • espnow is the connectionless Wi-Fi communication protocol.
  • fast_scan shows how to use fast scan while connecting to an AP..
  • ftm is a how to use FTM (Fine Timing Measurement) feature to calculate distance between devices.
  • getting_started contains the basic examples for using Wi-Fi in STA and AP mode.
  • iperf shows the common performance measurements for two ESP running this example.
  • power_save contains a how to use power save mode of Wi-Fi.
  • roaming contains a example using 802.11k and 802.11v APIs.
  • scan shows how to scan for all the available APs.
  • smart_config shows how ESP connects to a target AP with ESPTOUCH.
  • wifi_easy_connect shows how to configure an ESP device as an enrollee using Device Provisioning Protocol (DPP).
  • wpa2_enterprise connects to AP with WPA2 enterprise encryption.
  • wps contains a how to use the Wi-Fi Protected Setup protocol.

More

See the README.md file in the upper level examples directory for more information about examples.