diff --git a/docs/en/api-reference/protocols/mqtt.rst b/docs/en/api-reference/protocols/mqtt.rst
index 053159e..cb95675 100644
--- a/docs/en/api-reference/protocols/mqtt.rst
+++ b/docs/en/api-reference/protocols/mqtt.rst
@@ -94,12 +94,12 @@ SSL
 
 For more options on ``esp_mqtt_client_config_t``, please refer to API reference below
 
-Change settings in ``menuconfig``
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Change settings in Project Configuration Menu
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 ::
-    make menuconfig 
-    -> Component config -> ESP-MQTT Configuration 
+    idf.py menuconfig
+    -> Component config -> ESP-MQTT Configuration
 
 
 - :ref:`CONFIG_MQTT_PROTOCOL_311`: Enables 3.1.1 version of MQTT protocol
diff --git a/examples/protocols/mqtt/publish_test/README.md b/examples/protocols/mqtt/publish_test/README.md
index bdc2bc8..d3db836 100644
--- a/examples/protocols/mqtt/publish_test/README.md
+++ b/examples/protocols/mqtt/publish_test/README.md
@@ -22,7 +22,7 @@ This example can be executed on any ESP32 board, the only required interface is
 
 ### Configure the project
 
-* Run `make menuconfig` (or `idf.py menuconfig` if using CMake build system)
+* Open the project configuration menu (`idf.py menuconfig`)
 * Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
 * When using Make build system, set `Default serial port` under `Serial flasher config`.
 * Set brokers for all 4 transports (TCP, SSL, WS, WSS), also set certificate if needed
diff --git a/examples/protocols/mqtt/ssl/README.md b/examples/protocols/mqtt/ssl/README.md
index 929257d..5925c40 100644
--- a/examples/protocols/mqtt/ssl/README.md
+++ b/examples/protocols/mqtt/ssl/README.md
@@ -14,7 +14,7 @@ This example can be executed on any ESP32 board, the only required interface is
 
 ### Configure the project
 
-* Run `make menuconfig` (or `idf.py menuconfig` if using CMake build system)
+* Open the project configuration menu (`idf.py menuconfig`)
 * Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
 * When using Make build system, set `Default serial port` under `Serial flasher config`.
 
diff --git a/examples/protocols/mqtt/ssl_mutual_auth/README.md b/examples/protocols/mqtt/ssl_mutual_auth/README.md
index 763e267..9b20b37 100644
--- a/examples/protocols/mqtt/ssl_mutual_auth/README.md
+++ b/examples/protocols/mqtt/ssl_mutual_auth/README.md
@@ -14,7 +14,7 @@ This example can be executed on any ESP32 board, the only required interface is
 
 ### Configure the project
 
-* Run `make menuconfig` (or `idf.py menuconfig` if using CMake build system)
+* Open the project configuration menu (`idf.py menuconfig`)
 * Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
 * When using Make build system, set `Default serial port` under `Serial flasher config`.
 
diff --git a/examples/protocols/mqtt/tcp/README.md b/examples/protocols/mqtt/tcp/README.md
index aea6630..7247a7a 100644
--- a/examples/protocols/mqtt/tcp/README.md
+++ b/examples/protocols/mqtt/tcp/README.md
@@ -14,7 +14,7 @@ This example can be executed on any ESP32 board, the only required interface is
 
 ### Configure the project
 
-* Run `make menuconfig` (or `idf.py menuconfig` if using CMake build system)
+* Open the project configuration menu (`idf.py menuconfig`)
 * Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
 * When using Make build system, set `Default serial port` under `Serial flasher config`.
 
diff --git a/examples/protocols/mqtt/ws/README.md b/examples/protocols/mqtt/ws/README.md
index efe2efc..236521f 100644
--- a/examples/protocols/mqtt/ws/README.md
+++ b/examples/protocols/mqtt/ws/README.md
@@ -14,7 +14,7 @@ This example can be executed on any ESP32 board, the only required interface is
 
 ### Configure the project
 
-* Run `make menuconfig` (or `idf.py menuconfig` if using CMake build system)
+* Open the project configuration menu (`idf.py menuconfig`)
 * Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
 * When using Make build system, set `Default serial port` under `Serial flasher config`.
 
diff --git a/examples/protocols/mqtt/wss/README.md b/examples/protocols/mqtt/wss/README.md
index 9433986..453d52f 100644
--- a/examples/protocols/mqtt/wss/README.md
+++ b/examples/protocols/mqtt/wss/README.md
@@ -13,7 +13,7 @@ This example can be executed on any ESP32 board, the only required interface is
 
 ### Configure the project
 
-* Run `make menuconfig` (or `idf.py menuconfig` if using CMake build system)
+* Open the project configuration menu (`idf.py menuconfig`)
 * Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
 * When using Make build system, set `Default serial port` under `Serial flasher config`.