diff --git a/components/esp_modem/examples/modem_console/main/Kconfig.projbuild b/components/esp_modem/examples/modem_console/main/Kconfig.projbuild index 6f5e17a39..032c8c694 100644 --- a/components/esp_modem/examples/modem_console/main/Kconfig.projbuild +++ b/components/esp_modem/examples/modem_console/main/Kconfig.projbuild @@ -1,190 +1,190 @@ - -menu "Example Configuration" - - choice EXAMPLE_SERIAL_CONFIG - prompt "Type of serial connection to the modem" - default EXAMPLE_SERIAL_CONFIG_UART - config EXAMPLE_SERIAL_CONFIG_UART - bool "UART" - help - Connect to modem via UART. - config EXAMPLE_SERIAL_CONFIG_USB - bool "USB" - depends on IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3 - help - Connect to modem via USB (CDC-ACM class). For IDF version >= 4.4. - endchoice - - choice EXAMPLE_MODEM_DEVICE - prompt "Choose supported modem device (DCE)" - default EXAMPLE_MODEM_DEVICE_BG96 - help - Select modem device connected to the ESP DTE. - config EXAMPLE_MODEM_DEVICE_SHINY - bool "SHINY" - help - SHINY is a GSM/GPRS module. - It supports SHINY. - config EXAMPLE_MODEM_DEVICE_SIM800 - bool "SIM800" - help - SIMCom SIM800L is a GSM/GPRS module. - It supports Quad-band 850/900/1800/1900MHz. - config EXAMPLE_MODEM_DEVICE_BG96 - bool "BG96" - help - Quectel BG96 is a series of LTE Cat M1/Cat NB1/EGPRS module. - config EXAMPLE_MODEM_DEVICE_SIM7000 - bool "SIM7000" - help - SIM7000 is a Multi-Band LTE-FDD and GSM/GPRS/EDGE module. - config EXAMPLE_MODEM_DEVICE_SIM7070 - bool "SIM7070" - help - SIM7070 is Multi-Band CAT M and NB IoT module. - config EXAMPLE_MODEM_DEVICE_SIM7600 - bool "SIM7600" - help - SIM7600 is a Multi-Band LTE-TDD/LTE-FDD/HSPA+ and GSM/GPRS/EDGE module. - endchoice - - config EXAMPLE_MODEM_PPP_APN - string "Set MODEM APN" - default "internet" - help - Set APN (Access Point Name), a logical name to choose data network - - config EXAMPLE_MODEM_PPP_AUTH_USERNAME - string "Set username for authentication" - default "espressif" - depends on !EXAMPLE_MODEM_PPP_AUTH_NONE - help - Set username for PPP Authentication. - - config EXAMPLE_MODEM_PPP_AUTH_PASSWORD - string "Set password for authentication" - default "esp32" - depends on !EXAMPLE_MODEM_PPP_AUTH_NONE - help - Set password for PPP Authentication. - - config EXAMPLE_MODEM_PPP_AUTH_NONE - bool "Skip PPP authentication" - default n - help - Set to true for the PPP client to skip authentication - - config EXAMPLE_SEND_MSG - bool "Short message (SMS)" - default n - help - Select this, the modem will send a short message before power off. - - if EXAMPLE_SEND_MSG - config EXAMPLE_SEND_MSG_PEER_PHONE_NUMBER - string "Peer Phone Number (with area code)" - default "+8610086" - help - Enter the peer phone number that you want to send message to. - endif - - config EXAMPLE_NEED_SIM_PIN - bool "SIM PIN needed" - default n - help - Enable to set SIM PIN before starting the example - - config EXAMPLE_SIM_PIN - string "Set SIM PIN" - default "1234" - depends on EXAMPLE_NEED_SIM_PIN - help - Pin to unlock the SIM - - choice EXAMPLE_FLOW_CONTROL - bool "Set preferred modem control flow" - default EXAMPLE_FLOW_CONTROL_NONE - help - Set the modem's preferred control flow - - config EXAMPLE_FLOW_CONTROL_NONE - bool "No control flow" - config EXAMPLE_FLOW_CONTROL_SW - bool "SW control flow" - config EXAMPLE_FLOW_CONTROL_HW - bool "HW control flow" - endchoice - - menu "UART Configuration" - config EXAMPLE_MODEM_UART_TX_PIN - int "TXD Pin Number" - default 25 - range 0 31 - help - Pin number of UART TX. - - config EXAMPLE_MODEM_UART_RX_PIN - int "RXD Pin Number" - default 26 - range 0 31 - help - Pin number of UART RX. - - config EXAMPLE_MODEM_UART_RTS_PIN - int "RTS Pin Number" - default 27 - range 0 31 - help - Pin number of UART RTS. - - config EXAMPLE_MODEM_UART_CTS_PIN - int "CTS Pin Number" - default 23 - range 0 31 - help - Pin number of UART CTS. - - config EXAMPLE_MODEM_UART_EVENT_TASK_STACK_SIZE - int "UART Event Task Stack Size" - range 2000 6000 - default 2048 - help - Stack size of UART event task. - - config EXAMPLE_MODEM_UART_EVENT_TASK_PRIORITY - int "UART Event Task Priority" - range 3 22 - default 5 - help - Priority of UART event task. - - config EXAMPLE_MODEM_UART_EVENT_QUEUE_SIZE - int "UART Event Queue Size" - range 10 40 - default 30 - help - Length of UART event queue. - - config EXAMPLE_MODEM_UART_PATTERN_QUEUE_SIZE - int "UART Pattern Queue Size" - range 10 40 - default 20 - help - Length of UART pattern queue. - - config EXAMPLE_MODEM_UART_TX_BUFFER_SIZE - int "UART TX Buffer Size" - range 256 2048 - default 512 - help - Buffer size of UART TX buffer. - - config EXAMPLE_MODEM_UART_RX_BUFFER_SIZE - int "UART RX Buffer Size" - range 256 2048 - default 1024 - help - Buffer size of UART RX buffer. - endmenu - -endmenu + +menu "Example Configuration" + + choice EXAMPLE_SERIAL_CONFIG + prompt "Type of serial connection to the modem" + default EXAMPLE_SERIAL_CONFIG_UART + config EXAMPLE_SERIAL_CONFIG_UART + bool "UART" + help + Connect to modem via UART. + config EXAMPLE_SERIAL_CONFIG_USB + bool "USB" + depends on IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3 + help + Connect to modem via USB (CDC-ACM class). For IDF version >= 4.4. + endchoice + + choice EXAMPLE_MODEM_DEVICE + prompt "Choose supported modem device (DCE)" + default EXAMPLE_MODEM_DEVICE_BG96 + help + Select modem device connected to the ESP DTE. + config EXAMPLE_MODEM_DEVICE_SHINY + bool "SHINY" + help + SHINY is a GSM/GPRS module. + It supports SHINY. + config EXAMPLE_MODEM_DEVICE_SIM800 + bool "SIM800" + help + SIMCom SIM800L is a GSM/GPRS module. + It supports Quad-band 850/900/1800/1900MHz. + config EXAMPLE_MODEM_DEVICE_BG96 + bool "BG96" + help + Quectel BG96 is a series of LTE Cat M1/Cat NB1/EGPRS module. + config EXAMPLE_MODEM_DEVICE_SIM7000 + bool "SIM7000" + help + SIM7000 is a Multi-Band LTE-FDD and GSM/GPRS/EDGE module. + config EXAMPLE_MODEM_DEVICE_SIM7070 + bool "SIM7070" + help + SIM7070 is Multi-Band CAT M and NB IoT module. + config EXAMPLE_MODEM_DEVICE_SIM7600 + bool "SIM7600" + help + SIM7600 is a Multi-Band LTE-TDD/LTE-FDD/HSPA+ and GSM/GPRS/EDGE module. + endchoice + + config EXAMPLE_MODEM_PPP_APN + string "Set MODEM APN" + default "internet" + help + Set APN (Access Point Name), a logical name to choose data network + + config EXAMPLE_MODEM_PPP_AUTH_USERNAME + string "Set username for authentication" + default "espressif" + depends on !EXAMPLE_MODEM_PPP_AUTH_NONE + help + Set username for PPP Authentication. + + config EXAMPLE_MODEM_PPP_AUTH_PASSWORD + string "Set password for authentication" + default "esp32" + depends on !EXAMPLE_MODEM_PPP_AUTH_NONE + help + Set password for PPP Authentication. + + config EXAMPLE_MODEM_PPP_AUTH_NONE + bool "Skip PPP authentication" + default n + help + Set to true for the PPP client to skip authentication + + config EXAMPLE_SEND_MSG + bool "Short message (SMS)" + default n + help + Select this, the modem will send a short message before power off. + + if EXAMPLE_SEND_MSG + config EXAMPLE_SEND_MSG_PEER_PHONE_NUMBER + string "Peer Phone Number (with area code)" + default "+8610086" + help + Enter the peer phone number that you want to send message to. + endif + + config EXAMPLE_NEED_SIM_PIN + bool "SIM PIN needed" + default n + help + Enable to set SIM PIN before starting the example + + config EXAMPLE_SIM_PIN + string "Set SIM PIN" + default "1234" + depends on EXAMPLE_NEED_SIM_PIN + help + Pin to unlock the SIM + + choice EXAMPLE_FLOW_CONTROL + bool "Set preferred modem control flow" + default EXAMPLE_FLOW_CONTROL_NONE + help + Set the modem's preferred control flow + + config EXAMPLE_FLOW_CONTROL_NONE + bool "No control flow" + config EXAMPLE_FLOW_CONTROL_SW + bool "SW control flow" + config EXAMPLE_FLOW_CONTROL_HW + bool "HW control flow" + endchoice + + menu "UART Configuration" + config EXAMPLE_MODEM_UART_TX_PIN + int "TXD Pin Number" + default 25 + range 0 31 + help + Pin number of UART TX. + + config EXAMPLE_MODEM_UART_RX_PIN + int "RXD Pin Number" + default 26 + range 0 31 + help + Pin number of UART RX. + + config EXAMPLE_MODEM_UART_RTS_PIN + int "RTS Pin Number" + default 27 + range 0 31 + help + Pin number of UART RTS. + + config EXAMPLE_MODEM_UART_CTS_PIN + int "CTS Pin Number" + default 23 + range 0 31 + help + Pin number of UART CTS. + + config EXAMPLE_MODEM_UART_EVENT_TASK_STACK_SIZE + int "UART Event Task Stack Size" + range 2000 6000 + default 2048 + help + Stack size of UART event task. + + config EXAMPLE_MODEM_UART_EVENT_TASK_PRIORITY + int "UART Event Task Priority" + range 3 22 + default 5 + help + Priority of UART event task. + + config EXAMPLE_MODEM_UART_EVENT_QUEUE_SIZE + int "UART Event Queue Size" + range 10 40 + default 30 + help + Length of UART event queue. + + config EXAMPLE_MODEM_UART_PATTERN_QUEUE_SIZE + int "UART Pattern Queue Size" + range 10 40 + default 20 + help + Length of UART pattern queue. + + config EXAMPLE_MODEM_UART_TX_BUFFER_SIZE + int "UART TX Buffer Size" + range 256 2048 + default 512 + help + Buffer size of UART TX buffer. + + config EXAMPLE_MODEM_UART_RX_BUFFER_SIZE + int "UART RX Buffer Size" + range 256 2048 + default 1024 + help + Buffer size of UART RX buffer. + endmenu + +endmenu