examples/protocols/asio: use common network component

* Original commit: espressif/esp-idf@aa4a7804ec

examples/protocols/asio/chat_client/CMakeLists.txt

@@ -2,5 +2,9 @@
 # in this exact order for cmake to work correctly
 cmake_minimum_required(VERSION 3.5)
 
+# (Not part of the boilerplate)
+# This example uses an extra component for common functions such as Wi-Fi and Ethernet connection.
+set(EXTRA_COMPONENT_DIRS $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 project(asio_chat_client)

examples/protocols/asio/chat_client/Makefile

@@ -4,4 +4,6 @@
 #
 PROJECT_NAME := asio_chat_client
 
+EXTRA_COMPONENT_DIRS = $(IDF_PATH)/examples/common_components/protocol_examples_common
+
 include $(IDF_PATH)/make/project.mk

examples/protocols/asio/chat_client/README.md

@@ -1,19 +1,20 @@
-# ASIO chat server example
+# Asio chat client example
 
-Simple asio chat client using WiFi STA
+Simple Asio chat client using WiFi STA or Ethernet.
 
 ## Example workflow
 
-- WiFi STA is started and trying to connect to the access point defined through `make menuconfig`
+- Wi-Fi or Ethernet connection is established, and IP address is obtained.
-- Once connected and acquired IP address ASIO chat client connects to a corresponding server whose port number and ip are defined through `make menuconfig`
+- Asio chat client connects to the corresponding server whose port number and IP are defined through `make menuconfig`.
-- Chat client receives all messages from other chat clients, also it sends message received from stdin using `make monitor`
+- Chat client receives all messages from other chat clients, also it sends message received from stdin using `make monitor`.
 
 ## Running the example
 
-- Run `make menuconfig` to configure the access point's SSID and Password and server ip address and port number
+- Run `make menuconfig` to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
-- Start chat server either on host machine or as another ESP device running chat_server example
+- Set server IP address and port number in menuconfig, "Example configuration".
-- Run `make flash monitor` to build and upload the example to your board and connect to it's serial terminal
+- Start chat server either on host machine or as another ESP device running chat_server example.
-- Wait for WiFi to connect to your access point
+- Run `make flash monitor` to build and upload the example to your board and connect to it's serial terminal.
+- Wait for the board to connect to WiFi or Ethernet.
 - Receive and send messages to/from other clients on stdin/stdout via serial terminal.
 
 See the README.md file in the upper level 'examples' directory for more information about examples.

examples/protocols/asio/chat_client/components/CMakeLists.txt

@@ -1,5 +0,0 @@
-set(COMPONENT_SRCS "wifi_asio.cpp")
-
-set(COMPONENT_PRIV_REQUIRES asio nvs_flash console)
-
-register_component()

examples/protocols/asio/chat_client/components/component.mk

@@ -1,10 +0,0 @@
-#
-# Component Makefile
-#
-# This Makefile should, at the very least, just include $(SDK_PATH)/Makefile. By default, 
-# this will take the sources in the src/ directory, compile them and link them into 
-# lib(subdirectory_name).a in the build directory. This behaviour is entirely configurable,
-# please read the SDK documents if you need to do this.
-#
-
-COMPONENT_SRCDIRS = .

examples/protocols/asio/chat_client/components/wifi_asio.cpp

@@ -1,136 +0,0 @@
-/* Common WiFi Init as STA for ASIO examples
-
-   This example code is in the Public Domain (or CC0 licensed, at your option.)
-
-   Unless required by applicable law or agreed to in writing, this
-   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
-   CONDITIONS OF ANY KIND, either express or implied.
-*/
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "freertos/event_groups.h"
-#include "esp_system.h"
-#include "esp_wifi.h"
-#include "esp_event_loop.h"
-#include "esp_log.h"
-#include "nvs_flash.h"
-#include "driver/uart.h"
-#include "esp_console.h"
-#include "esp_vfs_dev.h"
-
-#include "lwip/err.h"
-#include "lwip/sys.h"
-
-#include <cstring>
-
-/* The examples use simple WiFi configuration that you can set via
-   'make menuconfig'.
-
-   If you'd rather not, just change the below entries to strings with
-   the config you want - ie #define EXAMPLE_WIFI_SSID "mywifissid"
-*/
-#define EXAMPLE_ESP_WIFI_SSID      CONFIG_ESP_WIFI_SSID
-#define EXAMPLE_ESP_WIFI_PASS      CONFIG_ESP_WIFI_PASSWORD
-
-/* FreeRTOS event group to signal when we are connected*/
-static EventGroupHandle_t wifi_event_group;
-
-/* The event group allows multiple bits for each event,
-   but we only care about one event - are we connected
-   to the AP with an IP? */
-const int WIFI_CONNECTED_BIT = BIT0;
-
-static const char *TAG = "asio example wifi init";
-
-/**
- *  Definition of ASIO main method, which is called after network initialized
- */
-void asio_main();
-
-static esp_err_t event_handler(void *ctx, system_event_t *event)
-{
-    switch(event->event_id) {
-    case SYSTEM_EVENT_STA_START:
-        esp_wifi_connect();
-        break;
-    case SYSTEM_EVENT_STA_GOT_IP:
-        ESP_LOGI(TAG, "got ip:%s",
-                 ip4addr_ntoa(&event->event_info.got_ip.ip_info.ip));
-        xEventGroupSetBits(wifi_event_group, WIFI_CONNECTED_BIT);
-        break;
-    case SYSTEM_EVENT_AP_STACONNECTED:
-        ESP_LOGI(TAG, "station:" MACSTR " join, AID=%d",
-                 MAC2STR(event->event_info.sta_connected.mac),
-                 event->event_info.sta_connected.aid);
-        break;
-    case SYSTEM_EVENT_AP_STADISCONNECTED:
-        ESP_LOGI(TAG, "station:" MACSTR "leave, AID=%d",
-                 MAC2STR(event->event_info.sta_disconnected.mac),
-                 event->event_info.sta_disconnected.aid);
-        break;
-    case SYSTEM_EVENT_STA_DISCONNECTED:
-        esp_wifi_connect();
-        xEventGroupClearBits(wifi_event_group, WIFI_CONNECTED_BIT);
-        break;
-    default:
-        break;
-    }
-    return ESP_OK;
-}
-
-void wifi_init_sta()
-{
-    wifi_event_group = xEventGroupCreate();
-
-    tcpip_adapter_init();
-    ESP_ERROR_CHECK(esp_event_loop_init(event_handler, NULL) );
-
-    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
-    ESP_ERROR_CHECK(esp_wifi_init(&cfg));
-    wifi_config_t wifi_config;
-    // zero out the config struct to ensure defaults are setup
-    memset(&wifi_config, 0, sizeof(wifi_sta_config_t));
-    // only copy ssid&password from example config
-    strcpy((char*)(wifi_config.sta.ssid), EXAMPLE_ESP_WIFI_SSID);
-    strcpy((char*)(wifi_config.sta.password), EXAMPLE_ESP_WIFI_PASS);
-
-    ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA) );
-    ESP_ERROR_CHECK(esp_wifi_set_config(ESP_IF_WIFI_STA, &wifi_config) );
-    ESP_ERROR_CHECK(esp_wifi_start() );
-
-    ESP_LOGI(TAG, "wifi_init_sta finished.");
-    ESP_LOGI(TAG, "connect to ap SSID:%s password:%s",
-             EXAMPLE_ESP_WIFI_SSID, EXAMPLE_ESP_WIFI_PASS);
-}
-
-extern "C" void app_main()
-{
-    //Initialize NVS
-    esp_err_t ret = nvs_flash_init();
-    if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
-      ESP_ERROR_CHECK(nvs_flash_erase());
-      ret = nvs_flash_init();
-    }
-    ESP_ERROR_CHECK(ret);
-    
-    ESP_LOGI(TAG, "ESP_WIFI_MODE_AP");
-    wifi_init_sta();
-
-    // Initialize VFS & UART so we can use std::cout/cin
-    setvbuf(stdin, NULL, _IONBF, 0);
-    setvbuf(stdout, NULL, _IONBF, 0);
-    /* Install UART driver for interrupt-driven reads and writes */
-    ESP_ERROR_CHECK( uart_driver_install( (uart_port_t)CONFIG_CONSOLE_UART_NUM,
-            256, 0, 0, NULL, 0) );
-    /* Tell VFS to use UART driver */
-    esp_vfs_dev_uart_use_driver(CONFIG_CONSOLE_UART_NUM);
-    esp_vfs_dev_uart_set_rx_line_endings(ESP_LINE_ENDINGS_CR);
-    /* Move the caret to the beginning of the next line on '\n' */
-    esp_vfs_dev_uart_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF);
-
-    // wait till we receive IP, so asio realated code can be started
-    xEventGroupWaitBits(wifi_event_group, WIFI_CONNECTED_BIT, 1, 1, portMAX_DELAY);
-
-    // network is ready, let's proceed with ASIO example
-    asio_main();
-}

examples/protocols/asio/chat_client/main/Kconfig.projbuild

@@ -1,28 +1,16 @@
 menu "Example Configuration"
 
-    config ESP_WIFI_SSID
-        string "WiFi SSID"
-        default "myssid"
-        help
-            SSID (network name) for the example to connect to.
-
-    config ESP_WIFI_PASSWORD
-        string "WiFi Password"
-        default "mypassword"
-        help
-            WiFi password (WPA or WPA2) for the example to use.
-
     config EXAMPLE_PORT
-        string "asio example port number"
+        string "Asio example server port number"
         default "2222"
         help
-            Port number used by ASIO example
+            Port number used by Asio example.
 
     config EXAMPLE_SERVER_IP
-        string "asio example server ip"
+        string "Asio example server ip"
         default "FROM_STDIN"
         help
-            asio example server ip for this client to connect to (leave default=FROM_STDIN to enter the server address
+            Asio example server ip for this client to connect to.
-            via serial terminal).
+            Leave default "FROM_STDIN" to enter the server address via serial terminal.
 
 endmenu

examples/protocols/asio/chat_client/main/chat_client.cpp

@@ -14,6 +14,10 @@
 #include <thread>
 #include "asio.hpp"
 #include "chat_message.hpp"
+#include "protocol_examples_common.h"
+#include "esp_event.h"
+#include "tcpip_adapter.h"
+#include "nvs_flash.h"
 
 using asio::ip::tcp;
 
@@ -130,8 +134,21 @@ private:
 void read_line(char * line, int max_chars);
 
 
-void asio_main()
+extern "C" void app_main()
 {
+    ESP_ERROR_CHECK(nvs_flash_init());
+    tcpip_adapter_init();
+    ESP_ERROR_CHECK(esp_event_loop_create_default());
+
+    /* This helper function configures Wi-Fi or Ethernet, as selected in menuconfig.
+     * Read "Establishing Wi-Fi or Ethernet Connection" section in
+     * examples/protocols/README.md for more information about this function.
+     */
+    ESP_ERROR_CHECK(example_connect());
+
+    /* This helper function configures blocking UART I/O */
+    ESP_ERROR_CHECK(example_configure_stdin_stdout());
+
     std::string name(CONFIG_EXAMPLE_SERVER_IP);
     std::string port(CONFIG_EXAMPLE_PORT);
     char line[chat_message::max_body_length + 1] = { 0 };
@@ -152,7 +169,7 @@ void asio_main()
 
     std::thread t([&io_context](){ io_context.run(); });
 
-    while (std::cin.getline(line, chat_message::max_body_length + 1) && std::string(line) != "exit\n") {
+    while (std::cin.getline(line, chat_message::max_body_length + 1) && std::string(line) != "exit") {
       chat_message msg;
       msg.body_length(std::strlen(line));
       std::memcpy(msg.body(), line, msg.body_length());
@@ -162,4 +179,6 @@ void asio_main()
 
     c.close();
     t.join();
+
+    ESP_ERROR_CHECK(example_disconnect());
 }

examples/protocols/asio/chat_server/CMakeLists.txt

@@ -2,5 +2,9 @@
 # in this exact order for cmake to work correctly
 cmake_minimum_required(VERSION 3.5)
 
+# (Not part of the boilerplate)
+# This example uses an extra component for common functions such as Wi-Fi and Ethernet connection.
+set(EXTRA_COMPONENT_DIRS $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 project(asio_chat_server)

examples/protocols/asio/chat_server/Makefile

@@ -4,4 +4,6 @@
 #
 PROJECT_NAME := asio_chat_server
 
+EXTRA_COMPONENT_DIRS = $(IDF_PATH)/examples/common_components/protocol_examples_common
+
 include $(IDF_PATH)/make/project.mk

examples/protocols/asio/chat_server/README.md

@@ -1,19 +1,20 @@
-# ASIO chat server example
+# Asio chat server example
 
-Simple asio chat server using WiFi STA
+Simple Asio chat server using WiFi STA or Ethernet.
 
 ## Example workflow
 
-- WiFi STA is started and trying to connect to the access point defined through `make menuconfig`
+- Wi-Fi or Ethernet connection is established, and IP address is obtained.
-- Once connected and acquired IP address, ASIO chat server is started on port number defined through `make menuconfig`
+- Asio chat server is started on port number defined through `make menuconfig`.
-- Chat server echoes a message (received from any client) to all connected clients
+- Chat server echoes a message (received from any client) to all connected clients.
 
 ## Running the example
 
-- Run `make menuconfig` to configure the access point's SSID and Password and port number
+- Run `make menuconfig` to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
-- Run `make flash monitor` to build and upload the example to your board and connect to it's serial terminal
+- Set server port number in menuconfig, "Example configuration".
-- Wait for WiFi to connect to your access point (note the IP address)
+- Run `make flash monitor` to build and upload the example to your board and connect to it's serial terminal.
-- Connect to the server using multiple clients, for example using any option below
+- Wait for the board to connect to WiFi or Ethernet (note the IP address).
+- Connect to the server using multiple clients, for example using any option below.
     - build and run asi chat client on your host machine
     - run chat_client asio example on ESP platform
     - since chat message consist of ascii size and message, it is possible to 

examples/protocols/asio/chat_server/asio_chat_server_test.py

@@ -40,7 +40,7 @@ def test_examples_protocol_asio_chat_server(env, extra_data):
     # 3. create tcp client and connect to server
     cli = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
     cli.settimeout(30)
-    cli.connect((data[0],80))
+    cli.connect((data[0], 2222))
     cli.send(test_msg)
     data = cli.recv(1024)
     # 4. check the message received back from the server

examples/protocols/asio/chat_server/components/CMakeLists.txt

@@ -1,5 +0,0 @@
-set(COMPONENT_SRCS "wifi_asio.cpp")
-
-set(COMPONENT_PRIV_REQUIRES asio nvs_flash console)
-
-register_component()

examples/protocols/asio/chat_server/components/component.mk

@@ -1,10 +0,0 @@
-#
-# Component Makefile
-#
-# This Makefile should, at the very least, just include $(SDK_PATH)/Makefile. By default, 
-# this will take the sources in the src/ directory, compile them and link them into 
-# lib(subdirectory_name).a in the build directory. This behaviour is entirely configurable,
-# please read the SDK documents if you need to do this.
-#
-
-COMPONENT_SRCDIRS = .

examples/protocols/asio/chat_server/components/wifi_asio.cpp

@@ -1,136 +0,0 @@
-/* Common WiFi Init as STA for ASIO examples
-
-   This example code is in the Public Domain (or CC0 licensed, at your option.)
-
-   Unless required by applicable law or agreed to in writing, this
-   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
-   CONDITIONS OF ANY KIND, either express or implied.
-*/
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "freertos/event_groups.h"
-#include "esp_system.h"
-#include "esp_wifi.h"
-#include "esp_event_loop.h"
-#include "esp_log.h"
-#include "nvs_flash.h"
-#include "driver/uart.h"
-#include "esp_console.h"
-#include "esp_vfs_dev.h"
-
-#include "lwip/err.h"
-#include "lwip/sys.h"
-
-#include <cstring>
-
-/* The examples use simple WiFi configuration that you can set via
-   'make menuconfig'.
-
-   If you'd rather not, just change the below entries to strings with
-   the config you want - ie #define EXAMPLE_WIFI_SSID "mywifissid"
-*/
-#define EXAMPLE_ESP_WIFI_SSID      CONFIG_ESP_WIFI_SSID
-#define EXAMPLE_ESP_WIFI_PASS      CONFIG_ESP_WIFI_PASSWORD
-
-/* FreeRTOS event group to signal when we are connected*/
-static EventGroupHandle_t wifi_event_group;
-
-/* The event group allows multiple bits for each event,
-   but we only care about one event - are we connected
-   to the AP with an IP? */
-const int WIFI_CONNECTED_BIT = BIT0;
-
-static const char *TAG = "asio example wifi init";
-
-/**
- *  Definition of ASIO main method, which is called after network initialized
- */
-void asio_main();
-
-static esp_err_t event_handler(void *ctx, system_event_t *event)
-{
-    switch(event->event_id) {
-    case SYSTEM_EVENT_STA_START:
-        esp_wifi_connect();
-        break;
-    case SYSTEM_EVENT_STA_GOT_IP:
-        ESP_LOGI(TAG, "got ip:%s",
-                 ip4addr_ntoa(&event->event_info.got_ip.ip_info.ip));
-        xEventGroupSetBits(wifi_event_group, WIFI_CONNECTED_BIT);
-        break;
-    case SYSTEM_EVENT_AP_STACONNECTED:
-        ESP_LOGI(TAG, "station:" MACSTR " join, AID=%d",
-                 MAC2STR(event->event_info.sta_connected.mac),
-                 event->event_info.sta_connected.aid);
-        break;
-    case SYSTEM_EVENT_AP_STADISCONNECTED:
-        ESP_LOGI(TAG, "station:" MACSTR "leave, AID=%d",
-                 MAC2STR(event->event_info.sta_disconnected.mac),
-                 event->event_info.sta_disconnected.aid);
-        break;
-    case SYSTEM_EVENT_STA_DISCONNECTED:
-        esp_wifi_connect();
-        xEventGroupClearBits(wifi_event_group, WIFI_CONNECTED_BIT);
-        break;
-    default:
-        break;
-    }
-    return ESP_OK;
-}
-
-void wifi_init_sta()
-{
-    wifi_event_group = xEventGroupCreate();
-
-    tcpip_adapter_init();
-    ESP_ERROR_CHECK(esp_event_loop_init(event_handler, NULL) );
-
-    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
-    ESP_ERROR_CHECK(esp_wifi_init(&cfg));
-    wifi_config_t wifi_config;
-    // zero out the config struct to ensure defaults are setup
-    memset(&wifi_config, 0, sizeof(wifi_sta_config_t));
-    // only copy ssid&password from example config
-    strcpy((char*)(wifi_config.sta.ssid), EXAMPLE_ESP_WIFI_SSID);
-    strcpy((char*)(wifi_config.sta.password), EXAMPLE_ESP_WIFI_PASS);
-
-    ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA) );
-    ESP_ERROR_CHECK(esp_wifi_set_config(ESP_IF_WIFI_STA, &wifi_config) );
-    ESP_ERROR_CHECK(esp_wifi_start() );
-
-    ESP_LOGI(TAG, "wifi_init_sta finished.");
-    ESP_LOGI(TAG, "connect to ap SSID:%s password:%s",
-             EXAMPLE_ESP_WIFI_SSID, EXAMPLE_ESP_WIFI_PASS);
-}
-
-extern "C" void app_main()
-{
-    //Initialize NVS
-    esp_err_t ret = nvs_flash_init();
-    if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
-      ESP_ERROR_CHECK(nvs_flash_erase());
-      ret = nvs_flash_init();
-    }
-    ESP_ERROR_CHECK(ret);
-    
-    ESP_LOGI(TAG, "ESP_WIFI_MODE_AP");
-    wifi_init_sta();
-
-    // Initialize VFS & UART so we can use std::cout/cin
-    setvbuf(stdin, NULL, _IONBF, 0);
-    setvbuf(stdout, NULL, _IONBF, 0);
-    /* Install UART driver for interrupt-driven reads and writes */
-    ESP_ERROR_CHECK( uart_driver_install( (uart_port_t)CONFIG_CONSOLE_UART_NUM,
-            256, 0, 0, NULL, 0) );
-    /* Tell VFS to use UART driver */
-    esp_vfs_dev_uart_use_driver(CONFIG_CONSOLE_UART_NUM);
-    esp_vfs_dev_uart_set_rx_line_endings(ESP_LINE_ENDINGS_CR);
-    /* Move the caret to the beginning of the next line on '\n' */
-    esp_vfs_dev_uart_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF);
-
-    // wait till we receive IP, so asio realated code can be started
-    xEventGroupWaitBits(wifi_event_group, WIFI_CONNECTED_BIT, 1, 1, portMAX_DELAY);
-
-    // network is ready, let's proceed with ASIO example
-    asio_main();
-}

examples/protocols/asio/chat_server/main/Kconfig.projbuild

@@ -1,21 +1,9 @@
 menu "Example Configuration"
 
-    config ESP_WIFI_SSID
-        string "WiFi SSID"
-        default "myssid"
-        help
-            SSID (network name) for the example to connect to.
-
-    config ESP_WIFI_PASSWORD
-        string "WiFi Password"
-        default "mypassword"
-        help
-            WiFi password (WPA or WPA2) for the example to use.
-
     config EXAMPLE_PORT
-        string "asio example port number"
+        string "Asio example server port number"
-        default "80"
+        default "2222"
         help
-            Port number used by ASIO example
+            Port number used by Asio example
 
 endmenu

examples/protocols/asio/chat_server/main/chat_server.cpp

@@ -17,6 +17,11 @@
 #include <utility>
 #include "asio.hpp"
 #include "chat_message.hpp"
+#include "protocol_examples_common.h"
+#include "esp_event.h"
+#include "tcpip_adapter.h"
+#include "nvs_flash.h"
+
 
 using asio::ip::tcp;
 
@@ -197,8 +202,21 @@ private:
 
 //----------------------------------------------------------------------
 
-int asio_main()
+extern "C" void app_main()
 {
+    ESP_ERROR_CHECK(nvs_flash_init());
+    tcpip_adapter_init();
+    ESP_ERROR_CHECK(esp_event_loop_create_default());
+
+    /* This helper function configures Wi-Fi or Ethernet, as selected in menuconfig.
+     * Read "Establishing Wi-Fi or Ethernet Connection" section in
+     * examples/protocols/README.md for more information about this function.
+     */
+    ESP_ERROR_CHECK(example_connect());
+
+    /* This helper function configures blocking UART I/O */
+    ESP_ERROR_CHECK(example_configure_stdin_stdout());
+
     asio::io_context io_context;
 
     std::list<chat_server> servers;
@@ -209,6 +227,4 @@ int asio_main()
     }
 
     io_context.run();
-
-  return 0;
 }

examples/protocols/asio/tcp_echo_server/CMakeLists.txt

@@ -2,5 +2,9 @@
 # in this exact order for cmake to work correctly
 cmake_minimum_required(VERSION 3.5)
 
+# (Not part of the boilerplate)
+# This example uses an extra component for common functions such as Wi-Fi and Ethernet connection.
+set(EXTRA_COMPONENT_DIRS $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 project(asio_tcp_echo_server)

examples/protocols/asio/tcp_echo_server/Makefile

@@ -4,4 +4,6 @@
 #
 PROJECT_NAME := asio_tcp_echo_server
 
+EXTRA_COMPONENT_DIRS = $(IDF_PATH)/examples/common_components/protocol_examples_common
+
 include $(IDF_PATH)/make/project.mk

examples/protocols/asio/tcp_echo_server/README.md

@@ -1,18 +1,19 @@
-# ASIO tcp echo server example
+# Asio TCP echo server example
 
-Simple asio echo server using WiFi STA
+Simple Asio TCP echo server using WiFi STA or Ethernet.
 
 ## Example workflow
 
-- WiFi STA is started and trying to connect to the access point defined through `make menuconfig`
+- Wi-Fi or Ethernet connection is established, and IP address is obtained.
-- Once connected and acquired IP address, ASIO tcp server is started on port number defined through `make menuconfig`
+- Asio TCP server is started on port number defined through `make menuconfig`.
-- Server receives and echoes back messages transmitted from client
+- Server receives and echoes back messages transmitted from client.
 
 ## Running the example
 
-- Run `make menuconfig` to configure the access point's SSID and Password and port number
+- Run `make menuconfig` to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
-- Run `make flash monitor` to build and upload the example to your board and connect to it's serial terminal
+- Set server port number in menuconfig, "Example configuration".
-- Wait for WiFi to connect to your access point (note the IP address)
+- Run `make flash monitor` to build and upload the example to your board and connect to it's serial terminal.
-- You can now send a tcp message and check it is repeated, for example using netcat `nc IP PORT`
+- Wait for the board to connect to WiFi or Ethernet (note the IP address).
+- You can now send a TCP message and check it is repeated, for example using netcat `nc IP PORT`.
 
 See the README.md file in the upper level 'examples' directory for more information about examples.

examples/protocols/asio/tcp_echo_server/asio_tcp_server_test.py

@@ -42,7 +42,7 @@ def test_examples_protocol_asio_tcp_server(env, extra_data):
     # 3. create tcp client and connect to server
     cli = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
     cli.settimeout(30)
-    cli.connect((data[0],80))
+    cli.connect((data[0], 2222))
     cli.send(test_msg)
     data = cli.recv(1024)
     # 4. check the message received back from the server
@@ -51,7 +51,7 @@ def test_examples_protocol_asio_tcp_server(env, extra_data):
         pass
     else:
         print("Failure!")
-        raise ValueError('Wrong data received from asi tcp server: {} (expoected:{})'.format(data, test_msg))
+        raise ValueError('Wrong data received from asi tcp server: {} (expected:{})'.format(data, test_msg))
     # 5. check the client message appears also on server terminal
     dut1.expect(test_msg.decode())
 

examples/protocols/asio/tcp_echo_server/components/CMakeLists.txt

@@ -1,5 +0,0 @@
-set(COMPONENT_SRCS "wifi_asio.cpp")
-
-set(COMPONENT_PRIV_REQUIRES asio nvs_flash console)
-
-register_component()

examples/protocols/asio/tcp_echo_server/components/component.mk

@@ -1,10 +0,0 @@
-#
-# Component Makefile
-#
-# This Makefile should, at the very least, just include $(SDK_PATH)/Makefile. By default, 
-# this will take the sources in the src/ directory, compile them and link them into 
-# lib(subdirectory_name).a in the build directory. This behaviour is entirely configurable,
-# please read the SDK documents if you need to do this.
-#
-
-COMPONENT_SRCDIRS = .

examples/protocols/asio/tcp_echo_server/components/wifi_asio.cpp

@@ -1,136 +0,0 @@
-/* Common WiFi Init as STA for ASIO examples
-
-   This example code is in the Public Domain (or CC0 licensed, at your option.)
-
-   Unless required by applicable law or agreed to in writing, this
-   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
-   CONDITIONS OF ANY KIND, either express or implied.
-*/
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "freertos/event_groups.h"
-#include "esp_system.h"
-#include "esp_wifi.h"
-#include "esp_event_loop.h"
-#include "esp_log.h"
-#include "nvs_flash.h"
-#include "driver/uart.h"
-#include "esp_console.h"
-#include "esp_vfs_dev.h"
-
-#include "lwip/err.h"
-#include "lwip/sys.h"
-
-#include <cstring>
-
-/* The examples use simple WiFi configuration that you can set via
-   'make menuconfig'.
-
-   If you'd rather not, just change the below entries to strings with
-   the config you want - ie #define EXAMPLE_WIFI_SSID "mywifissid"
-*/
-#define EXAMPLE_ESP_WIFI_SSID      CONFIG_ESP_WIFI_SSID
-#define EXAMPLE_ESP_WIFI_PASS      CONFIG_ESP_WIFI_PASSWORD
-
-/* FreeRTOS event group to signal when we are connected*/
-static EventGroupHandle_t wifi_event_group;
-
-/* The event group allows multiple bits for each event,
-   but we only care about one event - are we connected
-   to the AP with an IP? */
-const int WIFI_CONNECTED_BIT = BIT0;
-
-static const char *TAG = "asio example wifi init";
-
-/**
- *  Definition of ASIO main method, which is called after network initialized
- */
-void asio_main();
-
-static esp_err_t event_handler(void *ctx, system_event_t *event)
-{
-    switch(event->event_id) {
-    case SYSTEM_EVENT_STA_START:
-        esp_wifi_connect();
-        break;
-    case SYSTEM_EVENT_STA_GOT_IP:
-        ESP_LOGI(TAG, "got ip:%s",
-                 ip4addr_ntoa(&event->event_info.got_ip.ip_info.ip));
-        xEventGroupSetBits(wifi_event_group, WIFI_CONNECTED_BIT);
-        break;
-    case SYSTEM_EVENT_AP_STACONNECTED:
-        ESP_LOGI(TAG, "station:" MACSTR " join, AID=%d",
-                 MAC2STR(event->event_info.sta_connected.mac),
-                 event->event_info.sta_connected.aid);
-        break;
-    case SYSTEM_EVENT_AP_STADISCONNECTED:
-        ESP_LOGI(TAG, "station:" MACSTR "leave, AID=%d",
-                 MAC2STR(event->event_info.sta_disconnected.mac),
-                 event->event_info.sta_disconnected.aid);
-        break;
-    case SYSTEM_EVENT_STA_DISCONNECTED:
-        esp_wifi_connect();
-        xEventGroupClearBits(wifi_event_group, WIFI_CONNECTED_BIT);
-        break;
-    default:
-        break;
-    }
-    return ESP_OK;
-}
-
-void wifi_init_sta()
-{
-    wifi_event_group = xEventGroupCreate();
-
-    tcpip_adapter_init();
-    ESP_ERROR_CHECK(esp_event_loop_init(event_handler, NULL) );
-
-    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
-    ESP_ERROR_CHECK(esp_wifi_init(&cfg));
-    wifi_config_t wifi_config;
-    // zero out the config struct to ensure defaults are setup
-    memset(&wifi_config, 0, sizeof(wifi_sta_config_t));
-    // only copy ssid&password from example config
-    strcpy((char*)(wifi_config.sta.ssid), EXAMPLE_ESP_WIFI_SSID);
-    strcpy((char*)(wifi_config.sta.password), EXAMPLE_ESP_WIFI_PASS);
-
-    ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA) );
-    ESP_ERROR_CHECK(esp_wifi_set_config(ESP_IF_WIFI_STA, &wifi_config) );
-    ESP_ERROR_CHECK(esp_wifi_start() );
-
-    ESP_LOGI(TAG, "wifi_init_sta finished.");
-    ESP_LOGI(TAG, "connect to ap SSID:%s password:%s",
-             EXAMPLE_ESP_WIFI_SSID, EXAMPLE_ESP_WIFI_PASS);
-}
-
-extern "C" void app_main()
-{
-    //Initialize NVS
-    esp_err_t ret = nvs_flash_init();
-    if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
-      ESP_ERROR_CHECK(nvs_flash_erase());
-      ret = nvs_flash_init();
-    }
-    ESP_ERROR_CHECK(ret);
-    
-    ESP_LOGI(TAG, "ESP_WIFI_MODE_AP");
-    wifi_init_sta();
-
-    // Initialize VFS & UART so we can use std::cout/cin
-    setvbuf(stdin, NULL, _IONBF, 0);
-    setvbuf(stdout, NULL, _IONBF, 0);
-    /* Install UART driver for interrupt-driven reads and writes */
-    ESP_ERROR_CHECK( uart_driver_install( (uart_port_t)CONFIG_CONSOLE_UART_NUM,
-            256, 0, 0, NULL, 0) );
-    /* Tell VFS to use UART driver */
-    esp_vfs_dev_uart_use_driver(CONFIG_CONSOLE_UART_NUM);
-    esp_vfs_dev_uart_set_rx_line_endings(ESP_LINE_ENDINGS_CR);
-    /* Move the caret to the beginning of the next line on '\n' */
-    esp_vfs_dev_uart_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF);
-
-    // wait till we receive IP, so asio realated code can be started
-    xEventGroupWaitBits(wifi_event_group, WIFI_CONNECTED_BIT, 1, 1, portMAX_DELAY);
-
-    // network is ready, let's proceed with ASIO example
-    asio_main();
-}

examples/protocols/asio/tcp_echo_server/main/Kconfig.projbuild

@@ -1,21 +1,9 @@
 menu "Example Configuration"
 
-    config ESP_WIFI_SSID
-        string "WiFi SSID"
-        default "myssid"
-        help
-            SSID (network name) for the example to connect to.
-
-    config ESP_WIFI_PASSWORD
-        string "WiFi Password"
-        default "mypassword"
-        help
-            WiFi password (WPA or WPA2) for the example to use.
-
     config EXAMPLE_PORT
-        string "asio example port number"
+        string "Asio example port number"
-        default "80"
+        default "2222"
         help
-            Port number used by ASIO example
+            Port number used by Asio example.
 
 endmenu

examples/protocols/asio/tcp_echo_server/main/echo_server.cpp

@@ -1,6 +1,10 @@
 #include "asio.hpp"
 #include <string>
 #include <iostream>
+#include "protocol_examples_common.h"
+#include "esp_event.h"
+#include "tcpip_adapter.h"
+#include "nvs_flash.h"
 
 using asio::ip::tcp;
 
@@ -27,6 +31,7 @@ private:
         {
           if (!ec)
           {
+            data_[length] = 0;
             std::cout << data_ << std::endl;
             do_write(length);
           }
@@ -79,13 +84,24 @@ private:
 };
 
 
-void asio_main()
+extern "C" void app_main()
 {
+    ESP_ERROR_CHECK(nvs_flash_init());
+    tcpip_adapter_init();
+    ESP_ERROR_CHECK(esp_event_loop_create_default());
+
+    /* This helper function configures Wi-Fi or Ethernet, as selected in menuconfig.
+     * Read "Establishing Wi-Fi or Ethernet Connection" section in
+     * examples/protocols/README.md for more information about this function.
+     */
+    ESP_ERROR_CHECK(example_connect());
+
+    /* This helper function configures blocking UART I/O */
+    ESP_ERROR_CHECK(example_configure_stdin_stdout());
 
     asio::io_context io_context;
 
     server s(io_context, std::atoi(CONFIG_EXAMPLE_PORT));
 
     io_context.run();
-
 }

examples/protocols/asio/udp_echo_server/CMakeLists.txt

@@ -2,5 +2,9 @@
 # in this exact order for cmake to work correctly
 cmake_minimum_required(VERSION 3.5)
 
+# (Not part of the boilerplate)
+# This example uses an extra component for common functions such as Wi-Fi and Ethernet connection.
+set(EXTRA_COMPONENT_DIRS $ENV{IDF_PATH}/examples/common_components/protocol_examples_common)
+
 include($ENV{IDF_PATH}/tools/cmake/project.cmake)
 project(asio_udp_echo_server)

examples/protocols/asio/udp_echo_server/Makefile

@@ -4,4 +4,6 @@
 #
 PROJECT_NAME := asio_udp_echo_server
 
+EXTRA_COMPONENT_DIRS = $(IDF_PATH)/examples/common_components/protocol_examples_common
+
 include $(IDF_PATH)/make/project.mk

examples/protocols/asio/udp_echo_server/README.md

@@ -1,18 +1,19 @@
-# ASIO udp echo server example
+# Asio UDP echo server example
 
-Simple asio echo server using WiFi STA
+Simple Asio UDP echo server using WiFi STA or Ethernet.
 
 ## Example workflow
 
-- WiFi STA is started and trying to connect to the access point defined through `make menuconfig`
+- Wi-Fi or Ethernet connection is established, and IP address is obtained.
-- Once connected and acquired IP address, ASIO udp server is started on port number defined through `make menuconfig`
+- Asio UDP server is started on port number defined through `make menuconfig`
 - Server receives and echoes back messages transmitted from client
 
 ## Running the example
 
-- Run `make menuconfig` to configure the access point's SSID and Password and port number
+- Run `make menuconfig` to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
-- Run `make flash monitor` to build and upload the example to your board and connect to it's serial terminal
+- Set server port number in menuconfig, "Example configuration".
-- Wait for WiFi to connect to your access point (note the IP address)
+- Run `make flash monitor` to build and upload the example to your board and connect to it's serial terminal.
-- You can now send a udp message and check it is repeated, for example using netcat `nc -u IP PORT`
+- Wait for the board to connect to WiFi or Ethernet (note the IP address).
+- You can now send a UDP message and check it is repeated, for example using netcat `nc -u IP PORT`.
 
 See the README.md file in the upper level 'examples' directory for more information about examples.

examples/protocols/asio/udp_echo_server/asio_udp_server_test.py

@@ -42,7 +42,7 @@ def test_examples_protocol_asio_udp_server(env, extra_data):
     # 3. create tcp client and connect to server
     cli = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
     cli.settimeout(30)
-    cli.connect((data[0], 80))
+    cli.connect((data[0], 2222))
     cli.send(test_msg)
     data = cli.recv(1024)
     # 4. check the message received back from the server
@@ -51,7 +51,7 @@ def test_examples_protocol_asio_udp_server(env, extra_data):
         pass
     else:
         print("Failure!")
-        raise ValueError('Wrong data received from asi udp server: {} (expoected:{})'.format(data, test_msg))
+        raise ValueError('Wrong data received from asio udp server: {} (expected:{})'.format(data, test_msg))
     # 5. check the client message appears also on server terminal
     dut1.expect(test_msg.decode())
 

examples/protocols/asio/udp_echo_server/components/CMakeLists.txt

@@ -1,5 +0,0 @@
-set(COMPONENT_SRCS "wifi_asio.cpp")
-
-set(COMPONENT_PRIV_REQUIRES asio nvs_flash console)
-
-register_component()

examples/protocols/asio/udp_echo_server/components/component.mk

@@ -1,10 +0,0 @@
-#
-# Component Makefile
-#
-# This Makefile should, at the very least, just include $(SDK_PATH)/Makefile. By default, 
-# this will take the sources in the src/ directory, compile them and link them into 
-# lib(subdirectory_name).a in the build directory. This behaviour is entirely configurable,
-# please read the SDK documents if you need to do this.
-#
-
-COMPONENT_SRCDIRS = .

examples/protocols/asio/udp_echo_server/components/wifi_asio.cpp

@@ -1,136 +0,0 @@
-/* Common WiFi Init as STA for ASIO examples
-
-   This example code is in the Public Domain (or CC0 licensed, at your option.)
-
-   Unless required by applicable law or agreed to in writing, this
-   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
-   CONDITIONS OF ANY KIND, either express or implied.
-*/
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "freertos/event_groups.h"
-#include "esp_system.h"
-#include "esp_wifi.h"
-#include "esp_event_loop.h"
-#include "esp_log.h"
-#include "nvs_flash.h"
-#include "driver/uart.h"
-#include "esp_console.h"
-#include "esp_vfs_dev.h"
-
-#include "lwip/err.h"
-#include "lwip/sys.h"
-
-#include <cstring>
-
-/* The examples use simple WiFi configuration that you can set via
-   'make menuconfig'.
-
-   If you'd rather not, just change the below entries to strings with
-   the config you want - ie #define EXAMPLE_WIFI_SSID "mywifissid"
-*/
-#define EXAMPLE_ESP_WIFI_SSID      CONFIG_ESP_WIFI_SSID
-#define EXAMPLE_ESP_WIFI_PASS      CONFIG_ESP_WIFI_PASSWORD
-
-/* FreeRTOS event group to signal when we are connected*/
-static EventGroupHandle_t wifi_event_group;
-
-/* The event group allows multiple bits for each event,
-   but we only care about one event - are we connected
-   to the AP with an IP? */
-const int WIFI_CONNECTED_BIT = BIT0;
-
-static const char *TAG = "asio example wifi init";
-
-/**
- *  Definition of ASIO main method, which is called after network initialized
- */
-void asio_main();
-
-static esp_err_t event_handler(void *ctx, system_event_t *event)
-{
-    switch(event->event_id) {
-    case SYSTEM_EVENT_STA_START:
-        esp_wifi_connect();
-        break;
-    case SYSTEM_EVENT_STA_GOT_IP:
-        ESP_LOGI(TAG, "got ip:%s",
-                 ip4addr_ntoa(&event->event_info.got_ip.ip_info.ip));
-        xEventGroupSetBits(wifi_event_group, WIFI_CONNECTED_BIT);
-        break;
-    case SYSTEM_EVENT_AP_STACONNECTED:
-        ESP_LOGI(TAG, "station:" MACSTR " join, AID=%d",
-                 MAC2STR(event->event_info.sta_connected.mac),
-                 event->event_info.sta_connected.aid);
-        break;
-    case SYSTEM_EVENT_AP_STADISCONNECTED:
-        ESP_LOGI(TAG, "station:" MACSTR "leave, AID=%d",
-                 MAC2STR(event->event_info.sta_disconnected.mac),
-                 event->event_info.sta_disconnected.aid);
-        break;
-    case SYSTEM_EVENT_STA_DISCONNECTED:
-        esp_wifi_connect();
-        xEventGroupClearBits(wifi_event_group, WIFI_CONNECTED_BIT);
-        break;
-    default:
-        break;
-    }
-    return ESP_OK;
-}
-
-void wifi_init_sta()
-{
-    wifi_event_group = xEventGroupCreate();
-
-    tcpip_adapter_init();
-    ESP_ERROR_CHECK(esp_event_loop_init(event_handler, NULL) );
-
-    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
-    ESP_ERROR_CHECK(esp_wifi_init(&cfg));
-    wifi_config_t wifi_config;
-    // zero out the config struct to ensure defaults are setup
-    memset(&wifi_config, 0, sizeof(wifi_sta_config_t));
-    // only copy ssid&password from example config
-    strcpy((char*)(wifi_config.sta.ssid), EXAMPLE_ESP_WIFI_SSID);
-    strcpy((char*)(wifi_config.sta.password), EXAMPLE_ESP_WIFI_PASS);
-
-    ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA) );
-    ESP_ERROR_CHECK(esp_wifi_set_config(ESP_IF_WIFI_STA, &wifi_config) );
-    ESP_ERROR_CHECK(esp_wifi_start() );
-
-    ESP_LOGI(TAG, "wifi_init_sta finished.");
-    ESP_LOGI(TAG, "connect to ap SSID:%s password:%s",
-             EXAMPLE_ESP_WIFI_SSID, EXAMPLE_ESP_WIFI_PASS);
-}
-
-extern "C" void app_main()
-{
-    //Initialize NVS
-    esp_err_t ret = nvs_flash_init();
-    if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
-      ESP_ERROR_CHECK(nvs_flash_erase());
-      ret = nvs_flash_init();
-    }
-    ESP_ERROR_CHECK(ret);
-    
-    ESP_LOGI(TAG, "ESP_WIFI_MODE_AP");
-    wifi_init_sta();
-
-    // Initialize VFS & UART so we can use std::cout/cin
-    setvbuf(stdin, NULL, _IONBF, 0);
-    setvbuf(stdout, NULL, _IONBF, 0);
-    /* Install UART driver for interrupt-driven reads and writes */
-    ESP_ERROR_CHECK( uart_driver_install( (uart_port_t)CONFIG_CONSOLE_UART_NUM,
-            256, 0, 0, NULL, 0) );
-    /* Tell VFS to use UART driver */
-    esp_vfs_dev_uart_use_driver(CONFIG_CONSOLE_UART_NUM);
-    esp_vfs_dev_uart_set_rx_line_endings(ESP_LINE_ENDINGS_CR);
-    /* Move the caret to the beginning of the next line on '\n' */
-    esp_vfs_dev_uart_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF);
-
-    // wait till we receive IP, so asio realated code can be started
-    xEventGroupWaitBits(wifi_event_group, WIFI_CONNECTED_BIT, 1, 1, portMAX_DELAY);
-
-    // network is ready, let's proceed with ASIO example
-    asio_main();
-}

examples/protocols/asio/udp_echo_server/main/Kconfig.projbuild

@@ -1,21 +1,9 @@
 menu "Example Configuration"
 
-    config ESP_WIFI_SSID
-        string "WiFi SSID"
-        default "myssid"
-        help
-            SSID (network name) for the example to connect to.
-
-    config ESP_WIFI_PASSWORD
-        string "WiFi Password"
-        default "mypassword"
-        help
-            WiFi password (WPA or WPA2) for the example to use.
-
     config EXAMPLE_PORT
-        string "asio example port number"
+        string "Asio example port number"
-        default "80"
+        default "2222"
         help
-            Port number used by ASIO example
+            Port number used by Asio example.
 
 endmenu

examples/protocols/asio/udp_echo_server/main/udp_echo_server.cpp

@@ -13,6 +13,12 @@
 
 #include "asio.hpp"
 
+#include "protocol_examples_common.h"
+#include "esp_event.h"
+#include "tcpip_adapter.h"
+#include "nvs_flash.h"
+
+
 using asio::ip::udp;
 
 class server
@@ -32,6 +38,7 @@ public:
         {
           if (!ec && bytes_recvd > 0)
           {
+            data_[bytes_recvd] = 0;
             std::cout << data_ << std::endl;
             do_send(bytes_recvd);
           }
@@ -59,8 +66,21 @@ private:
   char data_[max_length];
 };
 
-void asio_main()
+extern "C" void app_main()
 {
+    ESP_ERROR_CHECK(nvs_flash_init());
+    tcpip_adapter_init();
+    ESP_ERROR_CHECK(esp_event_loop_create_default());
+
+    /* This helper function configures Wi-Fi or Ethernet, as selected in menuconfig.
+     * Read "Establishing Wi-Fi or Ethernet Connection" section in
+     * examples/protocols/README.md for more information about this function.
+     */
+    ESP_ERROR_CHECK(example_connect());
+
+    /* This helper function configures blocking UART I/O */
+    ESP_ERROR_CHECK(example_configure_stdin_stdout());
+
     asio::io_context io_context;
 
     server s(io_context, std::atoi(CONFIG_EXAMPLE_PORT));

examples/protocols/asio/wifi_init/wifi_asio.cpp

@@ -1,136 +0,0 @@
-/* Common WiFi Init as STA for ASIO examples
-
-   This example code is in the Public Domain (or CC0 licensed, at your option.)
-
-   Unless required by applicable law or agreed to in writing, this
-   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
-   CONDITIONS OF ANY KIND, either express or implied.
-*/
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "freertos/event_groups.h"
-#include "esp_system.h"
-#include "esp_wifi.h"
-#include "esp_event_loop.h"
-#include "esp_log.h"
-#include "nvs_flash.h"
-#include "driver/uart.h"
-#include "esp_console.h"
-#include "esp_vfs_dev.h"
-
-#include "lwip/err.h"
-#include "lwip/sys.h"
-
-#include <cstring>
-
-/* The examples use simple WiFi configuration that you can set via
-   'make menuconfig'.
-
-   If you'd rather not, just change the below entries to strings with
-   the config you want - ie #define EXAMPLE_WIFI_SSID "mywifissid"
-*/
-#define EXAMPLE_ESP_WIFI_SSID      CONFIG_ESP_WIFI_SSID
-#define EXAMPLE_ESP_WIFI_PASS      CONFIG_ESP_WIFI_PASSWORD
-
-/* FreeRTOS event group to signal when we are connected*/
-static EventGroupHandle_t wifi_event_group;
-
-/* The event group allows multiple bits for each event,
-   but we only care about one event - are we connected
-   to the AP with an IP? */
-const int WIFI_CONNECTED_BIT = BIT0;
-
-static const char *TAG = "asio example wifi init";
-
-/**
- *  Definition of ASIO main method, which is called after network initialized
- */
-void asio_main();
-
-static esp_err_t event_handler(void *ctx, system_event_t *event)
-{
-    switch(event->event_id) {
-    case SYSTEM_EVENT_STA_START:
-        esp_wifi_connect();
-        break;
-    case SYSTEM_EVENT_STA_GOT_IP:
-        ESP_LOGI(TAG, "got ip:%s",
-                 ip4addr_ntoa(&event->event_info.got_ip.ip_info.ip));
-        xEventGroupSetBits(wifi_event_group, WIFI_CONNECTED_BIT);
-        break;
-    case SYSTEM_EVENT_AP_STACONNECTED:
-        ESP_LOGI(TAG, "station:" MACSTR " join, AID=%d",
-                 MAC2STR(event->event_info.sta_connected.mac),
-                 event->event_info.sta_connected.aid);
-        break;
-    case SYSTEM_EVENT_AP_STADISCONNECTED:
-        ESP_LOGI(TAG, "station:" MACSTR "leave, AID=%d",
-                 MAC2STR(event->event_info.sta_disconnected.mac),
-                 event->event_info.sta_disconnected.aid);
-        break;
-    case SYSTEM_EVENT_STA_DISCONNECTED:
-        esp_wifi_connect();
-        xEventGroupClearBits(wifi_event_group, WIFI_CONNECTED_BIT);
-        break;
-    default:
-        break;
-    }
-    return ESP_OK;
-}
-
-void wifi_init_sta()
-{
-    wifi_event_group = xEventGroupCreate();
-
-    tcpip_adapter_init();
-    ESP_ERROR_CHECK(esp_event_loop_init(event_handler, NULL) );
-
-    wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
-    ESP_ERROR_CHECK(esp_wifi_init(&cfg));
-    wifi_config_t wifi_config;
-    // zero out the config struct to ensure defaults are setup
-    memset(&wifi_config, 0, sizeof(wifi_sta_config_t));
-    // only copy ssid&password from example config
-    strcpy((char*)(wifi_config.sta.ssid), EXAMPLE_ESP_WIFI_SSID);
-    strcpy((char*)(wifi_config.sta.password), EXAMPLE_ESP_WIFI_PASS);
-
-    ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA) );
-    ESP_ERROR_CHECK(esp_wifi_set_config(ESP_IF_WIFI_STA, &wifi_config) );
-    ESP_ERROR_CHECK(esp_wifi_start() );
-
-    ESP_LOGI(TAG, "wifi_init_sta finished.");
-    ESP_LOGI(TAG, "connect to ap SSID:%s password:%s",
-             EXAMPLE_ESP_WIFI_SSID, EXAMPLE_ESP_WIFI_PASS);
-}
-
-extern "C" void app_main()
-{
-    //Initialize NVS
-    esp_err_t ret = nvs_flash_init();
-    if (ret == ESP_ERR_NVS_NO_FREE_PAGES) {
-      ESP_ERROR_CHECK(nvs_flash_erase());
-      ret = nvs_flash_init();
-    }
-    ESP_ERROR_CHECK(ret);
-    
-    ESP_LOGI(TAG, "ESP_WIFI_MODE_AP");
-    wifi_init_sta();
-
-    // Initialize VFS & UART so we can use std::cout/cin
-    setvbuf(stdin, NULL, _IONBF, 0);
-    setvbuf(stdout, NULL, _IONBF, 0);
-    /* Install UART driver for interrupt-driven reads and writes */
-    ESP_ERROR_CHECK( uart_driver_install( (uart_port_t)CONFIG_CONSOLE_UART_NUM,
-            256, 0, 0, NULL, 0) );
-    /* Tell VFS to use UART driver */
-    esp_vfs_dev_uart_use_driver(CONFIG_CONSOLE_UART_NUM);
-    esp_vfs_dev_uart_set_rx_line_endings(ESP_LINE_ENDINGS_CR);
-    /* Move the caret to the beginning of the next line on '\n' */
-    esp_vfs_dev_uart_set_tx_line_endings(ESP_LINE_ENDINGS_CRLF);
-
-    // wait till we receive IP, so asio realated code can be started
-    xEventGroupWaitBits(wifi_event_group, WIFI_CONNECTED_BIT, 1, 1, portMAX_DELAY);
-
-    // network is ready, let's proceed with ASIO example
-    asio_main();
-}