esp_modem: Moved to component folder

2025-07-29 10:17:30 +02:00 · 2021-05-19 23:00:28 +08:00
parent 61f264f97a
commit 90641c89eb
133 changed files with 21 additions and 21 deletions
--- a/components/esp_modem/examples/simple_cmux_client/main/Kconfig.projbuild
+++ b/components/esp_modem/examples/simple_cmux_client/main/Kconfig.projbuild
@ -0,0 +1,64 @@
+menu "Example Configuration"
+
+    choice EXAMPLE_MODEM_DEVICE
+        prompt "Choose supported modem device (DCE)"
+        default EXAMPLE_MODEM_DEVICE_BG96
+        help
+            Select modem device connected to the ESP DTE.
+        config EXAMPLE_MODEM_DEVICE_SIM800
+            bool "SIM800"
+            help
+                SIMCom SIM800L is a GSM/GPRS module.
+                It supports Quad-band 850/900/1800/1900MHz.
+        config EXAMPLE_MODEM_DEVICE_BG96
+            bool "BG96"
+            help
+                Quectel BG96 is a series of LTE Cat M1/Cat NB1/EGPRS module.
+        config EXAMPLE_MODEM_DEVICE_SIM7600
+            bool "SIM7600"
+            help
+                SIM7600 is a Multi-Band LTE-TDD/LTE-FDD/HSPA+ and GSM/GPRS/EDGE module.
+    endchoice
+
+    config EXAMPLE_MODEM_PPP_APN
+        string "Set MODEM APN"
+        default "internet"
+        help
+            Set APN (Access Point Name), a logical name to choose data network
+
+    config EXAMPLE_NEED_SIM_PIN
+        bool "SIM PIN needed"
+        default n
+        help
+            Enable to set SIM PIN before starting the example
+
+    config EXAMPLE_SIM_PIN
+        string "Set SIM PIN"
+        default "1234"
+        depends on EXAMPLE_NEED_SIM_PIN
+        help
+            Pin to unlock the SIM
+
+    config EXAMPLE_USE_VFS_TERM
+        bool "Use VFS terminal"
+        default n
+        help
+            Demonstrate use of VFS as a communication terminal of the DTE.
+            VFS driver implements non-block reads, writes and selects to communicate with esp-modem,
+            but this implementation uses UART resource only.
+
+    config EXAMPLE_PERFORM_OTA
+        bool "Perform OTA in the example"
+        default n
+        help
+            Perform the OTA update after connecting to the network and mqtt broker.
+            This option is used only to exercise network stability in CMUX mode.
+
+    config EXAMPLE_PERFORM_OTA_URI
+        string "URI of the binary"
+        default "https://my.code/esp32.bin"
+        depends on EXAMPLE_PERFORM_OTA
+        help
+            HTTPS address of the update binary.
+
+endmenu