espressif/esp-protocols
1
0
Fork 1
mirror of https://github.com/espressif/esp-protocols.git synced 2025-07-20 05:52:22 +02:00
Code Issues Packages Projects Releases Wiki Activity

esp_modem: Moved to component folder

Browse Source
This commit is contained in:
David Čermák
2021-05-19 23:00:28 +08:00
committed by David Cermak
parent 61f264f97a
commit 90641c89eb
133 changed files with 21 additions and 21 deletions
Download Patch File Download Diff File Expand all files Collapse all files

75
components/esp_modem/src/esp_modem_term_uart.cpp Normal file
View File

@ -0,0 +1,75 @@
// Copyright 2021 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "cxx_include/esp_modem_dte.hpp"
#include "driver/uart.h"
#include "esp_modem_config.h"
#include "uart_resource.hpp"
namespace esp_modem {
uart_resource::~uart_resource()
{
if (port >= UART_NUM_0 && port < UART_NUM_MAX) {
uart_driver_delete(port);
}
}
uart_resource::uart_resource(const esp_modem_dte_config *config, struct QueueDefinition** event_queue, int fd)
:port(-1)
{
esp_err_t res;
/* Config UART */
uart_config_t uart_config = {};
uart_config.baud_rate = config->uart_config.baud_rate;
uart_config.data_bits = config->uart_config.data_bits;
uart_config.parity = config->uart_config.parity;
uart_config.stop_bits = config->uart_config.stop_bits;
uart_config.flow_ctrl = (config->uart_config.flow_control == ESP_MODEM_FLOW_CONTROL_HW) ? UART_HW_FLOWCTRL_CTS_RTS
: UART_HW_FLOWCTRL_DISABLE;
uart_config.source_clk = UART_SCLK_APB;
throw_if_esp_fail(uart_param_config(config->uart_config.port_num, &uart_config), "config uart parameter failed");
if (config->uart_config.flow_control == ESP_MODEM_FLOW_CONTROL_HW) {
res = uart_set_pin(config->uart_config.port_num, config->uart_config.tx_io_num, config->uart_config.rx_io_num,
config->uart_config.rts_io_num, config->uart_config.cts_io_num);
} else {
res = uart_set_pin(config->uart_config.port_num, config->uart_config.tx_io_num, config->uart_config.rx_io_num,
UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
}
throw_if_esp_fail(res, "config uart gpio failed");
/* Set flow control threshold */
if (config->uart_config.flow_control == ESP_MODEM_FLOW_CONTROL_HW) {
res = uart_set_hw_flow_ctrl(config->uart_config.port_num, UART_HW_FLOWCTRL_CTS_RTS, UART_FIFO_LEN - 8);
} else if (config->uart_config.flow_control == ESP_MODEM_FLOW_CONTROL_SW) {
res = uart_set_sw_flow_ctrl(config->uart_config.port_num, true, 8, UART_FIFO_LEN - 8);
}
throw_if_esp_fail(res, "config uart flow control failed");
/* Install UART driver and get event queue used inside driver */
res = uart_driver_install(config->uart_config.port_num,
config->uart_config.rx_buffer_size, config->uart_config.tx_buffer_size,
config->uart_config.event_queue_size, config->uart_config.event_queue_size ? event_queue : nullptr,
0);
throw_if_esp_fail(res, "install uart driver failed");
throw_if_esp_fail(uart_set_rx_timeout(config->uart_config.port_num, 1), "set rx timeout failed");
throw_if_esp_fail(uart_set_rx_full_threshold(config->uart_config.port_num, 64), "config rx full threshold failed");
/* mark UART as initialized */
port = config->uart_config.port_num;
}
} // namespace esp_modem