// cat ../include/generate/esp_modem_command_declare.inc | clang -E -P -CC  -xc -I../include -DGENERATE_DOCS  - | sed -n '1,/DCE command documentation/!p' > c_api.h
// cat ../include/generate/esp_modem_command_declare.inc | clang -E -P  -xc -I../include -DGENERATE_DOCS -DGENERATE_RST_LINKS - | sed 's/NL/\n/g' > cxx_api_links.rst

// call parametrs by names for documentation


//  --- DCE command documentation starts here ---
/**
 * @brief Sends the initial AT sequence to sync up with the device
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_sync (); /**
 * @brief Reads the operator name
 * @param[out] name module name
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_get_operator_name (char* name); /**
 * @brief Stores current user profile
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_store_profile (); /**
 * @brief Sets the supplied PIN code
 * @param[in] pin Pin
 * @return OK, FAIL or TIMEOUT
 */command_result esp_modem_set_pin (const char* pin); /**
 * @brief Checks if the SIM needs a PIN
 * @param[out] pin_ok true if the SIM card doesn't need a PIN to unlock
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_read_pin (bool* pin_ok); /**
 * @brief Sets echo mode
 * @param[in] echo_on true if echo mode on (repeats the commands)
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_set_echo (const bool echo_on); /**
 * @brief Sets the Txt or Pdu mode for SMS (only txt is supported)
 * @param[in] txt true if txt mode
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_sms_txt_mode (const bool txt); /**
 * @brief Sets the default (GSM) charater set
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_sms_character_set (); /**
 * @brief Sends SMS message in txt mode
 * @param[in] number Phone number to send the message to
 * @param[in] message Text message to be sent
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_send_sms (const char* number, const char* message); /**
 * @brief Resumes data mode (Switches back to th data mode, which was temporarily suspended)
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_resume_data_mode (); /**
 * @brief Sets php context
 * @param[in] x PdP context struct to setup modem cellular connection
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_set_pdp_context (struct PdpContext* x); /**
 * @brief Switches to the command mode
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_set_command_mode (); /**
 * @brief Switches to the CMUX mode
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_set_cmux (); /**
 * @brief Reads the IMSI number
 * @param[out] imsi Module's IMSI number
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_get_imsi (char* imsi); /**
 * @brief Reads the IMEI number
 * @param[out] imei Module's IMEI number
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_get_imei (char* imei); /**
 * @brief Reads the module name
 * @param[out] name module name
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_get_module_name (char* name); /**
 * @brief Sets the modem to data mode
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_set_data_mode (); /**
 * @brief Get Signal quality
 * @param[out] rssi signal strength indication
 * @param[out] ber channel bit error rate
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_get_signal_quality (int* rssi, int* ber); /**
 * @brief Sets HW control flow
 * @param[in] dce_flow 0=none, 2=RTS hw flow control of DCE
 * @param[in] dte_flow 0=none, 2=CTS hw flow control of DTE
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_set_flow_control (int dce_flow, int dte_flow); /**
 * @brief Hangs up current data call
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_hang_up (); /**
 * @brief Get voltage levels of modem power up circuitry
 * @param[out] voltage Current status in mV
 * @param[out] bcs charge status (-1-Not available, 0-Not charging, 1-Charging, 2-Charging done)
 * @param[out] bcl 1-100% battery capacity, -1-Not available
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_get_battery_status (int* voltage, int* bcs, int* bcl); /**
 * @brief Power down the module
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_power_down (); /**
 * @brief Reset the module
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_reset (); /**
 * @brief Configures the baudrate
 * @param[in] baud Desired baud rate of the DTE
 * @return OK, FAIL or TIMEOUT
 */ command_result esp_modem_set_baud (int baud);