esp-protocols/components/asio/examples/udp_echo_server

Supported Targets	ESP32	ESP32-S2	ESP32-S3	ESP32-C3

Asio UDP echo server example

Simple Asio UDP echo server using WiFi STA or Ethernet.

Example workflow

• Wi-Fi or Ethernet connection is established, and IP address is obtained.
• Asio UDP server is started on port number defined through the project configuration
• Server receives and echoes back messages transmitted from client

Running the example

• Open the project configuration menu (idf.py menuconfig) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.
• Set server port number in menuconfig, "Example configuration".
• Run idf.py -p PORT flash monitor to build and upload the example to your board and connect to it's serial terminal.
• Wait for the board to connect to WiFi or Ethernet (note the IP address).
• You can now send a UDP message and check it is repeated, for example using netcat nc -u IP PORT.

See the README.md file in the upper level 'examples' directory for more information about examples.