Remove StaticJsonDocument

examples/JsonConfigFile/JsonConfigFile.ino

@@ -34,18 +34,18 @@ struct Config {
   int port;
 };
 
-const char *filename = "/config.txt";  // <- SD library uses 8.3 filenames
+const char* filename = "/config.txt";  // <- SD library uses 8.3 filenames
 Config config;                         // <- global configuration object
 
 // Loads the configuration from a file
-void loadConfiguration(const char *filename, Config &config) {
+void loadConfiguration(const char* filename, Config& config) {
   // Open file for reading
   File file = SD.open(filename);
 
   // Allocate a temporary JsonDocument
   // Don't forget to change the capacity to match your requirements.
   // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<512> doc;
+  DynamicJsonDocument doc(512);
 
   // Deserialize the JSON document
   DeserializationError error = deserializeJson(doc, file);
@@ -63,7 +63,7 @@ void loadConfiguration(const char *filename, Config &config) {
 }
 
 // Saves the configuration to a file
-void saveConfiguration(const char *filename, const Config &config) {
+void saveConfiguration(const char* filename, const Config& config) {
   // Delete existing file, otherwise the configuration is appended to the file
   SD.remove(filename);
 
@@ -77,7 +77,7 @@ void saveConfiguration(const char *filename, const Config &config) {
   // Allocate a temporary JsonDocument
   // Don't forget to change the capacity to match your requirements.
   // Use https://arduinojson.org/assistant to compute the capacity.
-  StaticJsonDocument<256> doc;
+  DynamicJsonDocument doc(256);
 
   // Set the values in the document
   doc["hostname"] = config.hostname;
@@ -93,7 +93,7 @@ void saveConfiguration(const char *filename, const Config &config) {
 }
 
 // Prints the content of a file to the Serial
-void printFile(const char *filename) {
+void printFile(const char* filename) {
   // Open file for reading
   File file = SD.open(filename);
   if (!file) {
@@ -114,7 +114,8 @@ void printFile(const char *filename) {
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Initialize SD library
   const int chipSelect = 4;

examples/JsonFilterExample/JsonFilterExample.ino

@@ -11,7 +11,8 @@
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // The huge input: an extract from OpenWeatherMap response
   const __FlashStringHelper* input_json = F(
@@ -33,12 +34,12 @@ void setup() {
       "1000000,\"timezone\":0,\"sunrise\":1581492085,\"sunset\":1581527294}}");
 
   // The filter: it contains "true" for each value we want to keep
-  StaticJsonDocument<200> filter;
+  DynamicJsonDocument filter(200);
   filter["list"][0]["dt"] = true;
   filter["list"][0]["main"]["temp"] = true;
 
   // Deserialize the document
-  StaticJsonDocument<400> doc;
+  DynamicJsonDocument doc(400);
   deserializeJson(doc, input_json, DeserializationOption::Filter(filter));
 
   // Print the result

examples/JsonGeneratorExample/JsonGeneratorExample.ino

@@ -11,19 +11,15 @@
 void setup() {
   // Initialize Serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Allocate the JSON document
   //
-  // Inside the brackets, 200 is the RAM allocated to this document.
+  // Inside the parentheses, 200 is the RAM allocated to this document.
   // Don't forget to change this value to match your requirement.
   // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<200> doc;
-
-  // StaticJsonObject allocates memory on the stack, it can be
-  // replaced by DynamicJsonDocument which allocates in the heap.
-  //
-  // DynamicJsonDocument  doc(200);
+  DynamicJsonDocument doc(200);
 
   // Add values in the document
   //

examples/JsonParserExample/JsonParserExample.ino

@@ -11,19 +11,15 @@
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Allocate the JSON document
   //
-  // Inside the brackets, 200 is the capacity of the memory pool in bytes.
+  // Inside the parentheses, 200 is the capacity of the memory pool in bytes.
   // Don't forget to change this value to match your JSON document.
   // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<200> doc;
-
-  // StaticJsonDocument<N> allocates memory on the stack, it can be
-  // replaced by DynamicJsonDocument which allocates in the heap.
-  //
-  // DynamicJsonDocument doc(200);
+  DynamicJsonDocument doc(200);
 
   // JSON input string.
   //

examples/JsonServer/JsonServer.ino

@@ -25,7 +25,8 @@ EthernetServer server(80);
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Initialize Ethernet libary
   if (!Ethernet.begin(mac)) {
@@ -52,11 +53,12 @@ void loop() {
   Serial.println(F("New client"));
 
   // Read the request (we ignore the content in this example)
-  while (client.available()) client.read();
+  while (client.available())
+    client.read();
 
   // Allocate a temporary JsonDocument
   // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<500> doc;
+  DynamicJsonDocument doc(500);
 
   // Create the "analog" array
   JsonArray analogValues = doc.createNestedArray("analog");

examples/JsonUdpBeacon/JsonUdpBeacon.ino

@@ -32,7 +32,8 @@ EthernetUDP udp;
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Initialize Ethernet libary
   if (!Ethernet.begin(mac)) {
@@ -47,7 +48,7 @@ void setup() {
 void loop() {
   // Allocate a temporary JsonDocument
   // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<500> doc;
+  DynamicJsonDocument doc(500);
 
   // Create the "analog" array
   JsonArray analogValues = doc.createNestedArray("analog");

examples/MsgPackParser/MsgPackParser.ino

@@ -12,19 +12,15 @@
 void setup() {
   // Initialize serial port
   Serial.begin(9600);
-  while (!Serial) continue;
+  while (!Serial)
+    continue;
 
   // Allocate the JSON document
   //
-  // Inside the brackets, 200 is the capacity of the memory pool in bytes.
+  // Inside the parentheses, 200 is the capacity of the memory pool in bytes.
   // Don't forget to change this value to match your JSON document.
   // Use https://arduinojson.org/v6/assistant to compute the capacity.
-  StaticJsonDocument<200> doc;
-
-  // StaticJsonObject allocates memory on the stack, it can be
-  // replaced by DynamicJsonObject which allocates in the heap.
-  //
-  // DynamicJsonObject doc(200);
+  DynamicJsonDocument doc(200);
 
   // MessagePack input string.
   //