Update URLs to point to https://arduinojson.org/v7/

examples/JsonConfigFile/JsonConfigFile.ino

@@ -17,7 +17,7 @@
 // * CLK  <-> pin 13
 // * CS   <-> pin 4
 //
-// https://arduinojson.org/v6/example/config/
+// https://arduinojson.org/v7/example/config/
 
 #include <ArduinoJson.h>
 #include <SD.h>
@@ -136,7 +136,7 @@ void loop() {
 // ------------------
 //
 // File is an unbuffered stream, which is not optimal for ArduinoJson.
-// See: https://arduinojson.org/v6/how-to/improve-speed/
+// See: https://arduinojson.org/v7/how-to/improve-speed/
 
 // See also
 // --------

examples/JsonFilterExample/JsonFilterExample.ino

@@ -4,7 +4,7 @@
 //
 // This example shows how to use DeserializationOption::Filter
 //
-// https://arduinojson.org/v6/example/filter/
+// https://arduinojson.org/v7/example/filter/
 
 #include <ArduinoJson.h>
 

examples/JsonGeneratorExample/JsonGeneratorExample.ino

@@ -4,7 +4,7 @@
 //
 // This example shows how to generate a JSON document with ArduinoJson.
 //
-// https://arduinojson.org/v6/example/generator/
+// https://arduinojson.org/v7/example/generator/
 
 #include <ArduinoJson.h>
 
@@ -21,12 +21,12 @@ void setup() {
   doc["sensor"] = "gps";
   doc["time"] = 1351824120;
 
-  // Add an array.
+  // Add an array
   JsonArray data = doc["data"].to<JsonArray>();
   data.add(48.756080);
   data.add(2.302038);
 
-  // Generate the minified JSON and send it to the Serial port.
+  // Generate the minified JSON and send it to the Serial port
   serializeJson(doc, Serial);
   // The above line prints:
   // {"sensor":"gps","time":1351824120,"data":[48.756080,2.302038]}
@@ -34,7 +34,7 @@ void setup() {
   // Start a new line
   Serial.println();
 
-  // Generate the prettified JSON and send it to the Serial port.
+  // Generate the prettified JSON and send it to the Serial port
   serializeJsonPretty(doc, Serial);
   // The above line prints:
   // {

examples/JsonHttpClient/JsonHttpClient.ino

@@ -16,7 +16,7 @@
 //   ]
 // }
 //
-// https://arduinojson.org/v6/example/http-client/
+// https://arduinojson.org/v7/example/http-client/
 
 #include <ArduinoJson.h>
 #include <Ethernet.h>
@@ -108,7 +108,7 @@ void loop() {
 // ------------------
 //
 // EthernetClient is an unbuffered stream, which is not optimal for ArduinoJson.
-// See: https://arduinojson.org/v6/how-to/improve-speed/
+// See: https://arduinojson.org/v7/how-to/improve-speed/
 
 // See also
 // --------

examples/JsonParserExample/JsonParserExample.ino

@@ -4,7 +4,7 @@
 //
 // This example shows how to deserialize a JSON document with ArduinoJson.
 //
-// https://arduinojson.org/v6/example/parser/
+// https://arduinojson.org/v7/example/parser/
 
 #include <ArduinoJson.h>
 
@@ -24,14 +24,14 @@ void setup() {
   // Deserialize the JSON document
   DeserializationError error = deserializeJson(doc, json);
 
-  // Test if parsing succeeds.
+  // Test if parsing succeeds
   if (error) {
     Serial.print(F("deserializeJson() failed: "));
     Serial.println(error.f_str());
     return;
   }
 
-  // Fetch values.
+  // Fetch the values
   //
   // Most of the time, you can rely on the implicit casts.
   // In other case, you can do doc["time"].as<long>();
@@ -40,7 +40,7 @@ void setup() {
   double latitude = doc["data"][0];
   double longitude = doc["data"][1];
 
-  // Print values.
+  // Print the values
   Serial.println(sensor);
   Serial.println(time);
   Serial.println(latitude, 6);

examples/JsonServer/JsonServer.ino

@@ -13,7 +13,7 @@
 //   "digital": [1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0]
 // }
 //
-// https://arduinojson.org/v6/example/http-server/
+// https://arduinojson.org/v7/example/http-server/
 
 #include <ArduinoJson.h>
 #include <Ethernet.h>
@@ -102,7 +102,7 @@ void loop() {
 // ------------------
 //
 // EthernetClient is an unbuffered stream, which is not optimal for ArduinoJson.
-// See: https://arduinojson.org/v6/how-to/improve-speed/
+// See: https://arduinojson.org/v7/how-to/improve-speed/
 
 // See also
 // --------

examples/JsonUdpBeacon/JsonUdpBeacon.ino

@@ -17,7 +17,7 @@
 // $ ncat -ulp 8888
 // See https://nmap.org/ncat/
 //
-// https://arduinojson.org/v6/example/udp-beacon/
+// https://arduinojson.org/v7/example/udp-beacon/
 
 #include <ArduinoJson.h>
 #include <Ethernet.h>
@@ -90,7 +90,7 @@ void loop() {
 // ------------------
 //
 // EthernetUDP is an unbuffered stream, which is not optimal for ArduinoJson.
-// See: https://arduinojson.org/v6/how-to/improve-speed/
+// See: https://arduinojson.org/v7/how-to/improve-speed/
 
 // See also
 // --------

examples/MsgPackParser/MsgPackParser.ino

@@ -5,7 +5,7 @@
 // This example shows how to deserialize a MessagePack document with
 // ArduinoJson.
 //
-// https://arduinojson.org/v6/example/msgpack-parser/
+// https://arduinojson.org/v7/example/msgpack-parser/
 
 #include <ArduinoJson.h>
 
@@ -18,7 +18,7 @@ void setup() {
   // Allocate the JSON document
   JsonDocument doc;
 
-  // MessagePack input string.
+  // The MessagePack input string
   uint8_t input[] = {131, 166, 115, 101, 110, 115, 111, 114, 163, 103, 112, 115,
                      164, 116, 105, 109, 101, 206, 80,  147, 50,  248, 164, 100,
                      97,  116, 97,  146, 203, 64,  72,  96,  199, 58,  188, 148,
@@ -30,16 +30,17 @@ void setup() {
   //   "data": [48.75608, 2.302038]
   // }
 
+  // Parse the input
   DeserializationError error = deserializeMsgPack(doc, input);
 
-  // Test if parsing succeeded.
+  // Test if parsing succeeded
   if (error) {
     Serial.print("deserializeMsgPack() failed: ");
     Serial.println(error.f_str());
     return;
   }
 
-  // Fetch values.
+  // Fetch the values
   //
   // Most of the time, you can rely on the implicit casts.
   // In other case, you can do doc["time"].as<long>();
@@ -48,7 +49,7 @@ void setup() {
   double latitude = doc["data"][0];
   double longitude = doc["data"][1];
 
-  // Print values.
+  // Print the values
   Serial.println(sensor);
   Serial.println(time);
   Serial.println(latitude, 6);

examples/ProgmemExample/ProgmemExample.ino

@@ -9,7 +9,7 @@
 // JsonDocument. Prefer plain old char*, as they are more efficient in term of
 // code size, speed, and memory usage.
 //
-// https://arduinojson.org/v6/example/progmem/
+// https://arduinojson.org/v7/example/progmem/
 
 #include <ArduinoJson.h>
 

examples/StringExample/StringExample.ino

@@ -8,7 +8,7 @@
 // JsonDocument. Prefer plain old char[], as they are more efficient in term of
 // code size, speed, and memory usage.
 //
-// https://arduinojson.org/v6/example/string/
+// https://arduinojson.org/v7/example/string/
 
 #include <ArduinoJson.h>