Update SAMD Packages' Patches

1. Update Adafruit SAMD Packages' Patches from v1.6.3 to v1.6.4
2. Update Seeeduino SAMD Packages' Patches from v1.7.9 to v1.8.1

Packages_Patches/Seeeduino/hardware/samd/1.8.1/platform.txt

@@ -0,0 +1,204 @@
+# Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+# Arduino SAMD Core and platform.
+#
+# For more info:
+# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
+
+name=Seeed SAMD (32-bits ARM Cortex-M0+ and Cortex-M4) Boards
+version=1.8.1
+
+# Compile variables
+# -----------------
+
+compiler.warning_flags=-w
+compiler.warning_flags.none=-w
+compiler.warning_flags.default=
+compiler.warning_flags.more=-Wall -Wno-expansion-to-defined
+compiler.warning_flags.all=-Wall -Wextra -Wno-expansion-to-defined
+
+compiler.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
+compiler.c.cmd=arm-none-eabi-gcc
+compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD -D__SKETCH_NAME__="""{build.project_name}"""
+compiler.c.elf.cmd=arm-none-eabi-g++
+compiler.c.elf.flags=-Os -Wl,--gc-sections -save-temps
+compiler.S.cmd=arm-none-eabi-gcc
+compiler.S.flags=-c -g -x assembler-with-cpp -MMD
+compiler.cpp.cmd=arm-none-eabi-g++
+compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -D__SKETCH_NAME__="""{build.project_name}"""
+compiler.ar.cmd=arm-none-eabi-ar
+compiler.ar.flags=rcs
+compiler.objcopy.cmd=arm-none-eabi-objcopy
+compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
+compiler.elf2hex.bin.flags=-O binary
+compiler.elf2hex.hex.flags=-O ihex -R .eeprom
+compiler.elf2hex.cmd=arm-none-eabi-objcopy
+compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -u _printf_float -u _scanf_float -Wl,--wrap,_write -u __wrap__write
+compiler.size.cmd=arm-none-eabi-size
+compiler.define=-DARDUINO=
+compiler.readelf.cmd=arm-none-eabi-readelf
+
+# this can be overriden in boards.txt
+build.extra_flags=
+build.project_flags=
+build.cache_flags=
+build.flags.optimize=
+build.flags.maxspi=
+build.flags.maxqspi=
+build.flags.usbstack=
+build.flags.debug=
+build.flags.txrxled=
+build.flags.role=
+
+# These can be overridden in platform.local.txt
+compiler.c.extra_flags=
+compiler.c.elf.extra_flags=
+#compiler.c.elf.extra_flags=-v
+compiler.cpp.extra_flags=
+compiler.S.extra_flags=
+compiler.ar.extra_flags=
+compiler.elf2hex.extra_flags=
+
+compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Core/Include/" "-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/DSP/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.1.path}/CMSIS-Atmel/CMSIS/Device/ATMEL/"
+compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math 
+
+compiler.libraries.ldflags=
+
+# USB Flags
+# ---------
+build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON -DUSB_CONFIG_POWER={build.usb_power} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}' {build.flags.usbstack} {build.flags.debug} {build.flags.role} "-I{build.core.path}/TinyUSB" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src"
+
+# Default advertised device power setting in mA
+build.usb_power=100
+
+# Default usb manufacturer will be replaced at compile time using
+# numeric vendor ID if available or by board's specific value.
+build.usb_manufacturer="Unknown"
+
+
+# Compile patterns
+# ----------------
+
+## Compile c files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {build.flags.debug} {build.flags.txrxled} {build.flags.role} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
+
+## Compile c++ files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.project_flags}  {build.cache_flags} {build.flags.debug} {build.flags.txrxled} {build.flags.role} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {build.project_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
+
+## Compile S files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.project_flags}  {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
+
+## Create archives
+# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
+archive_file_path={build.path}/{archive_file}
+recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
+
+## Combine gc-sections, archives, and objects
+recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}"  "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} "-L{build.variant.path}" -lm "{build.path}/{archive_file}" -Wl,--end-group
+
+## Create output (bin file)
+recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
+
+## Create output (hex file)
+recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
+
+build.preferred_out_format=bin
+
+## Save hex
+recipe.output.tmp_file={build.project_name}.{build.preferred_out_format}
+recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format}
+
+## Compute size
+recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
+recipe.size.regex=\.text\s+([0-9]+).*
+
+#
+# BOSSA
+#
+tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path}
+tools.bossac.cmd=bossac
+tools.bossac.cmd.windows=bossac.exe
+tools.bossac.upload.params.verbose=-i -d
+tools.bossac.upload.params.quiet=
+tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R
+tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
+tools.bossac.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.bossac.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+# v1.8.0
+tools.bossac18.path={runtime.tools.bossac-1.8.0-48-gb176eee.path}
+tools.bossac18.cmd=bossac
+tools.bossac18.upload.params.verbose=-i -d
+tools.bossac18.upload.params.quiet=
+tools.bossac18.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U -i --offset={upload.offset} -w -v "{build.path}/{build.project_name}.bin" -R
+tools.bossac18.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.bossac18.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+#
+# BOSSA (ignore binary size)
+#
+tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path}
+tools.bossacI.cmd=bossac
+tools.bossacI.cmd.windows=bossac.exe
+tools.bossacI.upload.params.verbose=-i -d
+tools.bossacI.upload.params.quiet=
+tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R
+tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
+tools.bossacI.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.bossacI.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+#
+# OpenOCD sketch upload
+#
+tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}
+tools.openocd.cmd=bin/openocd
+tools.openocd.cmd.windows=bin/openocd.exe
+tools.openocd.upload.params.verbose=-d2
+tools.openocd.upload.params.quiet=-d0
+tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown"
+tools.openocd.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.openocd.upload.network_pattern={network_cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+# Program flashes the binary at 0x0000, so use the linker script without_bootloader
+tools.openocd.program.params.verbose=-d2
+tools.openocd.program.params.quiet=-d0
+tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
+tools.openocd.erase.params.verbose=-d3
+tools.openocd.erase.params.quiet=-d0
+tools.openocd.erase.pattern=
+tools.openocd.bootloader.params.verbose=-d2
+tools.openocd.bootloader.params.quiet=-d0
+tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
+#
+# OpenOCD sketch upload - version with configurable bootloader size
+# FIXME: this programmer is a workaround for default options being overwritten by uploadUsingPreferences
+#
+tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path}
+tools.openocd-withbootsize.cmd=bin/openocd
+tools.openocd-withbootsize.cmd.windows=bin/openocd.exe
+tools.openocd-withbootsize.upload.params.verbose=-d2
+tools.openocd-withbootsize.upload.params.quiet=-d0
+tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown"
+# Program flashes the binary at 0x0000, so use the linker script without_bootloader
+tools.openocd-withbootsize.program.params.verbose=-d2
+tools.openocd-withbootsize.program.params.quiet=-d0
+tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
+tools.openocd-withbootsize.erase.params.verbose=-d3
+tools.openocd-withbootsize.erase.params.quiet=-d0
+tools.openocd-withbootsize.erase.pattern=
+tools.openocd-withbootsize.bootloader.params.verbose=-d2
+tools.openocd-withbootsize.bootloader.params.quiet=-d0
+tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"

Packages_Patches/adafruit/hardware/samd/1.6.4/platform.txt

@@ -0,0 +1,226 @@
+# Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+# Arduino SAMD Core and platform.
+#
+# For more info:
+# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
+
+name=Adafruit SAMD (32-bits ARM Cortex-M0+ and Cortex-M4) Boards
+version=1.6.4
+
+# Compile variables
+# -----------------
+
+compiler.warning_flags=-w
+compiler.warning_flags.none=-w
+compiler.warning_flags.default=
+compiler.warning_flags.more=-Wall -Wno-expansion-to-defined
+compiler.warning_flags.all=-Wall -Wextra -Wno-expansion-to-defined
+
+compiler.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
+compiler.c.cmd=arm-none-eabi-gcc
+compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD -D__SKETCH_NAME__="""{build.project_name}"""
+compiler.c.elf.cmd=arm-none-eabi-g++
+compiler.c.elf.flags=-Os -Wl,--gc-sections -save-temps
+compiler.S.cmd=arm-none-eabi-gcc
+compiler.S.flags=-c -g -x assembler-with-cpp -MMD
+compiler.cpp.cmd=arm-none-eabi-g++
+compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -D__SKETCH_NAME__="""{build.project_name}"""
+compiler.ar.cmd=arm-none-eabi-ar
+compiler.ar.flags=rcs
+compiler.objcopy.cmd=arm-none-eabi-objcopy
+compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
+compiler.elf2hex.bin.flags=-O binary
+compiler.elf2hex.hex.flags=-O ihex -R .eeprom
+compiler.elf2hex.cmd=arm-none-eabi-objcopy
+compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align
+compiler.size.cmd=arm-none-eabi-size
+compiler.define=-DARDUINO=
+compiler.readelf.cmd=arm-none-eabi-readelf
+
+# this can be overriden in boards.txt
+build.extra_flags=
+build.cache_flags=
+build.flags.optimize=
+build.flags.maxspi=
+build.flags.maxqspi=
+build.flags.usbstack=
+build.flags.debug=
+
+# These can be overridden in platform.local.txt
+compiler.c.extra_flags=
+compiler.c.elf.extra_flags=
+#compiler.c.elf.extra_flags=-v
+compiler.cpp.extra_flags=
+compiler.S.extra_flags=
+compiler.ar.extra_flags=
+compiler.elf2hex.extra_flags=
+
+compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Core/Include/" "-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/DSP/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.0.path}/CMSIS/Device/ATMEL/"
+compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math
+
+compiler.libraries.ldflags=
+
+# USB Flags
+# ---------
+build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON -DUSB_CONFIG_POWER={build.usb_power} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}' {build.flags.usbstack} {build.flags.debug} "-I{build.core.path}/TinyUSB" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src"
+
+# Default advertised device power setting in mA
+build.usb_power=100
+
+# Default usb manufacturer will be replaced at compile time using
+# numeric vendor ID if available or by board's specific value.
+build.usb_manufacturer="Unknown"
+
+
+# Compile patterns
+# ----------------
+
+## Compile c files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.cache_flags}  {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
+
+## Compile c++ files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
+
+## Compile S files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
+
+## Create archives
+# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
+archive_file_path={build.path}/{archive_file}
+recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
+
+## Combine gc-sections, archives, and objects
+recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}"  "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} "-L{build.variant.path}" -lm "{build.path}/{archive_file}" -Wl,--end-group
+
+## Create output (bin file)
+recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
+
+## Create output (hex file)
+recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
+
+build.preferred_out_format=bin
+
+## Save hex
+recipe.output.tmp_file={build.project_name}.{build.preferred_out_format}
+recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format}
+
+## Compute size
+recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
+recipe.size.regex=\.text\s+([0-9]+).*
+
+#
+# BOSSA
+#
+tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path}
+tools.bossac.cmd=bossac
+tools.bossac.cmd.windows=bossac.exe
+
+tools.bossac.upload.params.verbose=-i -d
+tools.bossac.upload.params.quiet=
+tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R
+
+tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
+
+tools.bossac.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.bossac.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+
+# v1.8.0
+
+tools.bossac18.path={runtime.tools.bossac-1.8.0-48-gb176eee.path}
+tools.bossac18.cmd=bossac
+
+tools.bossac18.upload.params.verbose=-i -d
+tools.bossac18.upload.params.quiet=
+tools.bossac18.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U -i --offset={upload.offset} -w -v "{build.path}/{build.project_name}.bin" -R
+
+tools.bossac18.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.bossac18.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+
+#
+# BOSSA (ignore binary size)
+#
+tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path}
+tools.bossacI.cmd=bossac
+tools.bossacI.cmd.windows=bossac.exe
+
+tools.bossacI.upload.params.verbose=-i -d
+tools.bossacI.upload.params.quiet=
+tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R
+
+tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
+
+tools.bossacI.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.bossacI.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+
+
+#
+# OpenOCD sketch upload
+#
+
+tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}
+tools.openocd.cmd=bin/openocd
+tools.openocd.cmd.windows=bin/openocd.exe
+
+tools.openocd.upload.params.verbose=-d2
+tools.openocd.upload.params.quiet=-d0
+tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown"
+
+tools.openocd.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.openocd.upload.network_pattern={network_cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+
+# Program flashes the binary at 0x0000, so use the linker script without_bootloader
+tools.openocd.program.params.verbose=-d2
+tools.openocd.program.params.quiet=-d0
+tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
+
+tools.openocd.erase.params.verbose=-d3
+tools.openocd.erase.params.quiet=-d0
+tools.openocd.erase.pattern=
+
+tools.openocd.bootloader.params.verbose=-d2
+tools.openocd.bootloader.params.quiet=-d0
+tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
+
+#
+# OpenOCD sketch upload - version with configurable bootloader size
+# FIXME: this programmer is a workaround for default options being overwritten by uploadUsingPreferences
+#
+
+tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path}
+tools.openocd-withbootsize.cmd=bin/openocd
+tools.openocd-withbootsize.cmd.windows=bin/openocd.exe
+
+tools.openocd-withbootsize.upload.params.verbose=-d2
+tools.openocd-withbootsize.upload.params.quiet=-d0
+tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown"
+
+# Program flashes the binary at 0x0000, so use the linker script without_bootloader
+tools.openocd-withbootsize.program.params.verbose=-d2
+tools.openocd-withbootsize.program.params.quiet=-d0
+tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
+
+tools.openocd-withbootsize.erase.params.verbose=-d3
+tools.openocd-withbootsize.erase.params.quiet=-d0
+tools.openocd-withbootsize.erase.pattern=
+
+tools.openocd-withbootsize.bootloader.params.verbose=-d2
+tools.openocd-withbootsize.bootloader.params.quiet=-d0
+tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"

README.md

@@ -102,7 +102,8 @@ The best and easiest way is to use `Arduino Library Manager`. Search for `AsyncH
 3. Extract the zip file to `AsyncHTTPRequest_Generic-master` directory 
 4. Copy the whole `AsyncHTTPRequest_Generic-master` folder to Arduino libraries' directory such as `~/Arduino/libraries/`.
 
-### VS Code & PlatformIO:
+### VS Code & PlatformIO
+
 1. Install [VS Code](https://code.visualstudio.com/)
 2. Install [PlatformIO](https://platformio.org/platformio-ide)
 3. Install **AsyncHTTPRequest_Generic** library by using [Library Manager](https://docs.platformio.org/en/latest/librarymanager/). Search for ***AsyncHTTPRequest_Generic*** in [Platform.io Author's Libraries](https://platformio.org/lib/search?query=author:%22Khoi%20Hoang%22)
@@ -179,22 +180,22 @@ These files must be copied into the directory:
 
 Whenever the above-mentioned compiler error issue is fixed with the new Arduino SAMD release, you don't need to copy the `Arduino.h` file anymore.
 
- 5. ***To be able to automatically detect and display BOARD_NAME on Adafruit SAMD (Itsy-Bitsy M4, etc) boards***, you have to copy the file [Adafruit SAMD platform.txt](Packages_Patches/adafruit/hardware/samd/1.6.3) into Adafruit samd directory (~/.arduino15/packages/adafruit/hardware/samd/1.6.3). 
+ 5. ***To be able to automatically detect and display BOARD_NAME on Adafruit SAMD (Itsy-Bitsy M4, etc) boards***, you have to copy the file [Adafruit SAMD platform.txt](Packages_Patches/adafruit/hardware/samd/1.6.4) into Adafruit samd directory (~/.arduino15/packages/adafruit/hardware/samd/1.6.4). 
 
-Supposing the Adafruit SAMD core version is 1.6.3. This file must be copied into the directory:
+Supposing the Adafruit SAMD core version is 1.6.4. This file must be copied into the directory:
 
-- `~/.arduino15/packages/adafruit/hardware/samd/1.6.3/platform.txt`
+- `~/.arduino15/packages/adafruit/hardware/samd/1.6.4/platform.txt`
 
 Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz
 This file must be copied into the directory:
 
 - `~/.arduino15/packages/adafruit/hardware/samd/x.yy.zz/platform.txt`
 
- 6. ***To be able to automatically detect and display BOARD_NAME on Seeeduino SAMD (XIAO M0, Wio Terminal, etc) boards***, you have to copy the file [Seeeduino SAMD platform.txt](Packages_Patches/Seeeduino/hardware/samd/1.7.9) into Adafruit samd directory (~/.arduino15/packages/Seeeduino/hardware/samd/1.7.9). 
+ 6. ***To be able to automatically detect and display BOARD_NAME on Seeeduino SAMD (XIAO M0, Wio Terminal, etc) boards***, you have to copy the file [Seeeduino SAMD platform.txt](Packages_Patches/Seeeduino/hardware/samd/1.8.1) into Adafruit samd directory (~/.arduino15/packages/Seeeduino/hardware/samd/1.8.1). 
 
-Supposing the Seeeduino SAMD core version is 1.7.9. This file must be copied into the directory:
+Supposing the Seeeduino SAMD core version is 1.8.1. This file must be copied into the directory:
 
-- `~/.arduino15/packages/Seeeduino/hardware/samd/1.7.9/platform.txt`
+- `~/.arduino15/packages/Seeeduino/hardware/samd/1.8.1/platform.txt`
 
 Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz
 This file must be copied into the directory:
@@ -774,6 +775,8 @@ This library is based on, modified, bug-fixed and improved from:
   </tr> 
 </table>
 
+---
+
 ### Contributing
 
 If you want to contribute to this project: