v1.0.0
### Releases v1.0.0 1. Initial coding to add support to STM32F/L/H/G/WB/MP1 using built-in Ethernet (Nucleo-144, DISCOVERY, etc). 2. Add examples using STM32 boards.
This commit is contained in:
Khoi Hoang
@@ -0,0 +1,185 @@
|
||||
/*
|
||||
Copyright (c) 2011 Arduino. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _VARIANT_ARDUINO_STM32_
|
||||
#define _VARIANT_ARDUINO_STM32_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Pins
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#define PG9 0
|
||||
#define PG14 1
|
||||
#define PF15 2
|
||||
#define PE13 3
|
||||
#define PF14 4
|
||||
#define PE11 5
|
||||
#define PE9 6
|
||||
#define PF13 7
|
||||
#define PF12 8
|
||||
#define PD15 9
|
||||
#define PD14 10
|
||||
#define PA7 A10
|
||||
#define PA6 A11
|
||||
#define PA5 A12
|
||||
#define PB9 14
|
||||
#define PB8 15
|
||||
#define PC6 16
|
||||
#define PB15 17
|
||||
#define PB13 18
|
||||
#define PB12 19
|
||||
#define PA15 20
|
||||
#define PC7 21
|
||||
#define PB5 22
|
||||
#define PB3 23
|
||||
#define PA4 A13
|
||||
#define PB4 25
|
||||
#define PB6 26
|
||||
#define PB2 27
|
||||
#define PD13 28
|
||||
#define PD12 29
|
||||
#define PD11 30
|
||||
#define PE2 31
|
||||
#define PA0 A14
|
||||
#define PB0 33 // LED_GREEN
|
||||
#define PE0 34
|
||||
#define PB11 35
|
||||
#define PB10 36
|
||||
#define PE15 37
|
||||
#define PE14 38
|
||||
#define PE12 39
|
||||
#define PE10 40
|
||||
#define PE7 41
|
||||
#define PE8 42
|
||||
#define PC8 43
|
||||
#define PC9 44
|
||||
#define PC10 45
|
||||
#define PC11 46
|
||||
#define PC12 47
|
||||
#define PD2 48
|
||||
#define PG2 49
|
||||
#define PG3 50
|
||||
#define PD7 51
|
||||
#define PD6 52
|
||||
#define PD5 53
|
||||
#define PD4 54
|
||||
#define PD3 55
|
||||
// 56 is PE2 (31)
|
||||
#define PE4 57
|
||||
#define PE5 58
|
||||
#define PE6 59
|
||||
#define PE3 60
|
||||
#define PF8 A15
|
||||
#define PF7 A16
|
||||
#define PF9 A17
|
||||
#define PG1 64
|
||||
#define PG0 65
|
||||
#define PD1 66
|
||||
#define PD0 67
|
||||
#define PF0 68
|
||||
#define PF1 69
|
||||
#define PF2 70
|
||||
// 71 is PA7 (11)
|
||||
// 72 is NC
|
||||
#define PB7 73 // LED_BLUE
|
||||
#define PB14 74 // LED_RED
|
||||
#define PC13 75 // USER_BTN
|
||||
#define PD9 76 // Serial Rx
|
||||
#define PD8 77 // Serial Tx
|
||||
#define PA3 A0
|
||||
#define PC0 A1
|
||||
#define PC3 A2
|
||||
#define PF3 A3
|
||||
#define PF5 A4
|
||||
#define PF10 A5
|
||||
#define PB1 A6
|
||||
#define PC2 A7
|
||||
#define PF4 A8
|
||||
#define PF6 A9
|
||||
|
||||
// This must be a literal
|
||||
#define NUM_DIGITAL_PINS 88
|
||||
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
|
||||
#define NUM_ANALOG_INPUTS 18
|
||||
|
||||
// On-board LED pin number
|
||||
#define LED_BUILTIN PB0
|
||||
#define LED_GREEN LED_BUILTIN
|
||||
#define LED_BLUE PB7
|
||||
#define LED_RED PB14
|
||||
|
||||
// On-board user button
|
||||
#define USER_BTN PC13
|
||||
|
||||
// Timer Definitions
|
||||
// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
|
||||
#define TIMER_TONE TIM6
|
||||
#define TIMER_SERVO TIM7
|
||||
|
||||
// UART Definitions
|
||||
#define SERIAL_UART_INSTANCE 3 //Connected to ST-Link
|
||||
|
||||
// Serial pin used for console (ex: stlink)
|
||||
// Rerquired by Firmata
|
||||
#define PIN_SERIAL_RX PD9
|
||||
#define PIN_SERIAL_TX PD8
|
||||
|
||||
/* Extra HAL modules */
|
||||
#define HAL_DAC_MODULE_ENABLED
|
||||
#define HAL_ETH_MODULE_ENABLED
|
||||
|
||||
// Last Flash sector used for EEPROM emulation, address/sector depends on single/dual bank configuration.
|
||||
// By default 2MB single bank
|
||||
#define FLASH_BASE_ADDRESS 0x081C0000
|
||||
#define FLASH_DATA_SECTOR 11
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
// These serial port names are intended to allow libraries and architecture-neutral
|
||||
// sketches to automatically default to the correct port name for a particular type
|
||||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||
//
|
||||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||
//
|
||||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||
//
|
||||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
// pins are NOT connected to anything by default.
|
||||
#define SERIAL_PORT_MONITOR Serial
|
||||
|
||||
// KH mod to add Serial1, for ESP-AT
|
||||
//#define SERIAL_PORT_HARDWARE Serial
|
||||
#define SERIAL_PORT_HARDWARE Serial1
|
||||
#endif
|
||||
|
||||
#endif /* _VARIANT_ARDUINO_STM32_ */
|
||||
@@ -0,0 +1,145 @@
|
||||
/*
|
||||
Copyright (c) 2011 Arduino. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _VARIANT_ARDUINO_STM32_
|
||||
#define _VARIANT_ARDUINO_STM32_
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Pins
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#define PA3 0
|
||||
#define PA2 1
|
||||
#define PA10 2
|
||||
#define PB3 3
|
||||
#define PB5 4
|
||||
#define PB4 5
|
||||
#define PB10 6
|
||||
#define PA8 7
|
||||
#define PA9 8
|
||||
#define PC7 9
|
||||
#define PB6 10
|
||||
#define PA7 A6
|
||||
#define PA6 A7
|
||||
#define PA5 13
|
||||
#define PB9 14
|
||||
#define PB8 15
|
||||
// ST Morpho
|
||||
// CN7 Left Side
|
||||
#define PC10 16
|
||||
#define PC12 17
|
||||
// 18 is NC - BOOT0
|
||||
#define PA13 19 // SWD
|
||||
#define PA14 20 // SWD
|
||||
#define PA15 21
|
||||
#define PB7 22
|
||||
#define PC13 23
|
||||
#define PC14 24
|
||||
#define PC15 25
|
||||
#define PH0 26
|
||||
#define PH1 27
|
||||
#define PC2 A8
|
||||
#define PC3 A9
|
||||
// CN7 Right Side
|
||||
#define PC11 30
|
||||
#define PD2 31
|
||||
// CN10 Left Side
|
||||
#define PC9 32
|
||||
// CN10 Right side
|
||||
#define PC8 33
|
||||
#define PC6 34
|
||||
#define PC5 A10
|
||||
#define PA12 36
|
||||
#define PA11 37
|
||||
#define PB12 38
|
||||
#define PB11 39
|
||||
#define PB2 40
|
||||
#define PB1 41
|
||||
#define PB15 42
|
||||
#define PB14 43
|
||||
#define PB13 44
|
||||
#define PC4 A11
|
||||
#define PA0 A0
|
||||
#define PA1 A1
|
||||
#define PA4 A2
|
||||
#define PB0 A3
|
||||
#define PC1 A4
|
||||
#define PC0 A5
|
||||
|
||||
// This must be a literal
|
||||
#define NUM_DIGITAL_PINS 52
|
||||
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
|
||||
#define NUM_ANALOG_INPUTS 12
|
||||
|
||||
// On-board LED pin number
|
||||
#define LED_BUILTIN 13
|
||||
#define LED_GREEN LED_BUILTIN
|
||||
|
||||
// On-board user button
|
||||
#define USER_BTN PC13
|
||||
|
||||
// Timer Definitions
|
||||
// Use TIM6 when possible as servo and tone don't need GPIO output pin
|
||||
#define TIMER_TONE TIM6
|
||||
#define TIMER_SERVO TIM2
|
||||
|
||||
// UART Definitions
|
||||
#define SERIAL_UART_INSTANCE 2 //Connected to ST-Link
|
||||
// Default pin used for 'Serial' instance (ex: ST-Link)
|
||||
// Mandatory for Firmata
|
||||
#define PIN_SERIAL_RX 0
|
||||
#define PIN_SERIAL_TX 1
|
||||
|
||||
/* Extra HAL modules */
|
||||
#define HAL_DAC_MODULE_ENABLED
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
// These serial port names are intended to allow libraries and architecture-neutral
|
||||
// sketches to automatically default to the correct port name for a particular type
|
||||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||
//
|
||||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||
//
|
||||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||
//
|
||||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
// pins are NOT connected to anything by default.
|
||||
#define SERIAL_PORT_MONITOR Serial
|
||||
|
||||
// KH mod to add Serial1, for ESP-AT
|
||||
//#define SERIAL_PORT_HARDWARE Serial
|
||||
#define SERIAL_PORT_HARDWARE Serial1
|
||||
#endif
|
||||
|
||||
#endif /* _VARIANT_ARDUINO_STM32_ */
|
||||
@@ -0,0 +1,234 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
# Arduino SAMD Core and platform.
|
||||
#
|
||||
# For more info:
|
||||
# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
|
||||
|
||||
name=Seeed SAMD (32-bits ARM Cortex-M0+ and Cortex-M4) Boards
|
||||
version=1.7.7
|
||||
|
||||
# Compile variables
|
||||
# -----------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall -Wno-expansion-to-defined
|
||||
compiler.warning_flags.all=-Wall -Wextra -Wno-expansion-to-defined
|
||||
|
||||
compiler.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD -D__SKETCH_NAME__="""{build.project_name}"""
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags=-Os -Wl,--gc-sections -save-temps
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp -MMD
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -D__SKETCH_NAME__="""{build.project_name}"""
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
compiler.objcopy.cmd=arm-none-eabi-objcopy
|
||||
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
|
||||
compiler.elf2hex.bin.flags=-O binary
|
||||
compiler.elf2hex.hex.flags=-O ihex -R .eeprom
|
||||
compiler.elf2hex.cmd=arm-none-eabi-objcopy
|
||||
compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -u _printf_float -u _scanf_float -Wl,--wrap,_write -u __wrap__write
|
||||
compiler.size.cmd=arm-none-eabi-size
|
||||
compiler.define=-DARDUINO=
|
||||
compiler.readelf.cmd=arm-none-eabi-readelf
|
||||
|
||||
# this can be overriden in boards.txt
|
||||
build.extra_flags=
|
||||
build.project_flags=
|
||||
build.cache_flags=
|
||||
build.flags.optimize=
|
||||
build.flags.maxspi=
|
||||
build.flags.maxqspi=
|
||||
build.flags.usbstack=
|
||||
build.flags.debug=
|
||||
|
||||
# These can be overridden in platform.local.txt
|
||||
compiler.c.extra_flags=
|
||||
compiler.c.elf.extra_flags=
|
||||
#compiler.c.elf.extra_flags=-v
|
||||
compiler.cpp.extra_flags=
|
||||
compiler.S.extra_flags=
|
||||
compiler.ar.extra_flags=
|
||||
compiler.elf2hex.extra_flags=
|
||||
|
||||
compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.1.path}/CMSIS-Atmel/CMSIS/Device/ATMEL/"
|
||||
compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math
|
||||
|
||||
compiler.libraries.ldflags=
|
||||
|
||||
# USB Flags
|
||||
# ---------
|
||||
build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON -DUSB_CONFIG_POWER={build.usb_power} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}' {build.flags.usbstack} {build.flags.debug} "-I{build.core.path}/TinyUSB" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src"
|
||||
|
||||
# Default advertised device power setting in mA
|
||||
build.usb_power=100
|
||||
|
||||
# Default usb manufacturer will be replaced at compile time using
|
||||
# numeric vendor ID if available or by board's specific value.
|
||||
build.usb_manufacturer="Unknown"
|
||||
|
||||
|
||||
# Compile patterns
|
||||
# ----------------
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
|
||||
## Compile c++ files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {build.project_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {build.project_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile S files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Create archives
|
||||
# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
|
||||
archive_file_path={build.path}/{archive_file}
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Combine gc-sections, archives, and objects
|
||||
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} "-L{build.variant.path}" -lm "{build.path}/{archive_file}" -Wl,--end-group
|
||||
|
||||
## Create output (bin file)
|
||||
recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
|
||||
|
||||
## Create output (hex file)
|
||||
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
build.preferred_out_format=bin
|
||||
|
||||
## Save hex
|
||||
recipe.output.tmp_file={build.project_name}.{build.preferred_out_format}
|
||||
recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format}
|
||||
|
||||
## Compute size
|
||||
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
|
||||
recipe.size.regex=\.text\s+([0-9]+).*
|
||||
|
||||
#
|
||||
# BOSSA
|
||||
#
|
||||
tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossac.cmd=bossac
|
||||
tools.bossac.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossac.upload.params.verbose=-i -d
|
||||
tools.bossac.upload.params.quiet=
|
||||
tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossac.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossac.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
# v1.8.0
|
||||
|
||||
tools.bossac18.path={runtime.tools.bossac-1.8.0-48-gb176eee.path}
|
||||
tools.bossac18.cmd=bossac
|
||||
|
||||
tools.bossac18.upload.params.verbose=-i -d
|
||||
tools.bossac18.upload.params.quiet=
|
||||
tools.bossac18.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U -i --offset={upload.offset} -w -v "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac18.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossac18.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
#
|
||||
# BOSSA (ignore binary size)
|
||||
#
|
||||
tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossacI.cmd=bossac
|
||||
tools.bossacI.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossacI.upload.params.verbose=-i -d
|
||||
tools.bossacI.upload.params.quiet=
|
||||
tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossacI.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossacI.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload
|
||||
#
|
||||
|
||||
tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd.cmd=bin/openocd
|
||||
tools.openocd.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd.upload.params.verbose=-d2
|
||||
tools.openocd.upload.params.quiet=-d0
|
||||
tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown"
|
||||
|
||||
tools.openocd.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.openocd.upload.network_pattern={network_cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd.program.params.verbose=-d2
|
||||
tools.openocd.program.params.quiet=-d0
|
||||
tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd.erase.params.verbose=-d3
|
||||
tools.openocd.erase.params.quiet=-d0
|
||||
tools.openocd.erase.pattern=
|
||||
|
||||
tools.openocd.bootloader.params.verbose=-d2
|
||||
tools.openocd.bootloader.params.quiet=-d0
|
||||
tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload - version with configurable bootloader size
|
||||
# FIXME: this programmer is a workaround for default options being overwritten by uploadUsingPreferences
|
||||
#
|
||||
|
||||
tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd-withbootsize.cmd=bin/openocd
|
||||
tools.openocd-withbootsize.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd-withbootsize.upload.params.verbose=-d2
|
||||
tools.openocd-withbootsize.upload.params.quiet=-d0
|
||||
tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown"
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd-withbootsize.program.params.verbose=-d2
|
||||
tools.openocd-withbootsize.program.params.quiet=-d0
|
||||
tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd-withbootsize.erase.params.verbose=-d3
|
||||
tools.openocd-withbootsize.erase.params.quiet=-d0
|
||||
tools.openocd-withbootsize.erase.pattern=
|
||||
|
||||
tools.openocd-withbootsize.bootloader.params.verbose=-d2
|
||||
tools.openocd-withbootsize.bootloader.params.quiet=-d0
|
||||
tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
@@ -0,0 +1,230 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
# Arduino SAMD Core and platform.
|
||||
#
|
||||
# For more info:
|
||||
# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
|
||||
|
||||
name=Seeed SAMD (32-bits ARM Cortex-M0+ and Cortex-M4) Boards
|
||||
version=1.7.8
|
||||
|
||||
# Compile variables
|
||||
# -----------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall -Wno-expansion-to-defined
|
||||
compiler.warning_flags.all=-Wall -Wextra -Wno-expansion-to-defined
|
||||
|
||||
compiler.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD -D__SKETCH_NAME__="""{build.project_name}"""
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags=-Os -Wl,--gc-sections -save-temps
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp -MMD
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu++14 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -D__SKETCH_NAME__="""{build.project_name}"""
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
compiler.objcopy.cmd=arm-none-eabi-objcopy
|
||||
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
|
||||
compiler.elf2hex.bin.flags=-O binary
|
||||
compiler.elf2hex.hex.flags=-O ihex -R .eeprom
|
||||
compiler.elf2hex.cmd=arm-none-eabi-objcopy
|
||||
compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -u _printf_float -u _scanf_float -Wl,--wrap,_write -u __wrap__write
|
||||
compiler.size.cmd=arm-none-eabi-size
|
||||
compiler.define=-DARDUINO=
|
||||
compiler.readelf.cmd=arm-none-eabi-readelf
|
||||
|
||||
# this can be overriden in boards.txt
|
||||
build.extra_flags=
|
||||
build.project_flags=
|
||||
build.cache_flags=
|
||||
build.flags.optimize=
|
||||
build.flags.maxspi=
|
||||
build.flags.maxqspi=
|
||||
build.flags.usbstack=
|
||||
build.flags.debug=
|
||||
|
||||
# These can be overridden in platform.local.txt
|
||||
compiler.c.extra_flags=
|
||||
compiler.c.elf.extra_flags=
|
||||
#compiler.c.elf.extra_flags=-v
|
||||
compiler.cpp.extra_flags=
|
||||
compiler.S.extra_flags=
|
||||
compiler.ar.extra_flags=
|
||||
compiler.elf2hex.extra_flags=
|
||||
|
||||
compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Core/Include/" "-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/DSP/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.1.path}/CMSIS-Atmel/CMSIS/Device/ATMEL/"
|
||||
compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math
|
||||
|
||||
compiler.libraries.ldflags=
|
||||
|
||||
# USB Flags
|
||||
# ---------
|
||||
build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON -DUSB_CONFIG_POWER={build.usb_power} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}' {build.flags.usbstack} {build.flags.debug} "-I{build.core.path}/TinyUSB" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src"
|
||||
|
||||
# Default advertised device power setting in mA
|
||||
build.usb_power=100
|
||||
|
||||
# Default usb manufacturer will be replaced at compile time using
|
||||
# numeric vendor ID if available or by board's specific value.
|
||||
build.usb_manufacturer="Unknown"
|
||||
|
||||
|
||||
# Compile patterns
|
||||
# ----------------
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
##recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile c++ files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {build.project_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
##recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {build.project_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile S files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
##recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.project_flags} {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Create archives
|
||||
# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
|
||||
archive_file_path={build.path}/{archive_file}
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Combine gc-sections, archives, and objects
|
||||
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} "-L{build.variant.path}" -lm "{build.path}/{archive_file}" -Wl,--end-group
|
||||
|
||||
## Create output (bin file)
|
||||
recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
|
||||
|
||||
## Create output (hex file)
|
||||
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
build.preferred_out_format=bin
|
||||
|
||||
## Save hex
|
||||
recipe.output.tmp_file={build.project_name}.{build.preferred_out_format}
|
||||
recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format}
|
||||
|
||||
## Compute size
|
||||
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
|
||||
recipe.size.regex=\.text\s+([0-9]+).*
|
||||
|
||||
#
|
||||
# BOSSA
|
||||
#
|
||||
tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossac.cmd=bossac
|
||||
tools.bossac.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossac.upload.params.verbose=-i -d
|
||||
tools.bossac.upload.params.quiet=
|
||||
tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossac.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossac.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
# v1.8.0
|
||||
|
||||
tools.bossac18.path={runtime.tools.bossac-1.8.0-48-gb176eee.path}
|
||||
tools.bossac18.cmd=bossac
|
||||
|
||||
tools.bossac18.upload.params.verbose=-i -d
|
||||
tools.bossac18.upload.params.quiet=
|
||||
tools.bossac18.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U -i --offset={upload.offset} -w -v "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac18.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossac18.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
#
|
||||
# BOSSA (ignore binary size)
|
||||
#
|
||||
tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossacI.cmd=bossac
|
||||
tools.bossacI.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossacI.upload.params.verbose=-i -d
|
||||
tools.bossacI.upload.params.quiet=
|
||||
tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossacI.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossacI.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload
|
||||
#
|
||||
|
||||
tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd.cmd=bin/openocd
|
||||
tools.openocd.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd.upload.params.verbose=-d2
|
||||
tools.openocd.upload.params.quiet=-d0
|
||||
tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown"
|
||||
|
||||
tools.openocd.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.openocd.upload.network_pattern={network_cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd.program.params.verbose=-d2
|
||||
tools.openocd.program.params.quiet=-d0
|
||||
tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd.erase.params.verbose=-d3
|
||||
tools.openocd.erase.params.quiet=-d0
|
||||
tools.openocd.erase.pattern=
|
||||
|
||||
tools.openocd.bootloader.params.verbose=-d2
|
||||
tools.openocd.bootloader.params.quiet=-d0
|
||||
tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload - version with configurable bootloader size
|
||||
# FIXME: this programmer is a workaround for default options being overwritten by uploadUsingPreferences
|
||||
#
|
||||
|
||||
tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd-withbootsize.cmd=bin/openocd
|
||||
tools.openocd-withbootsize.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd-withbootsize.upload.params.verbose=-d2
|
||||
tools.openocd-withbootsize.upload.params.quiet=-d0
|
||||
tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown"
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd-withbootsize.program.params.verbose=-d2
|
||||
tools.openocd-withbootsize.program.params.quiet=-d0
|
||||
tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd-withbootsize.erase.params.verbose=-d3
|
||||
tools.openocd-withbootsize.erase.params.quiet=-d0
|
||||
tools.openocd-withbootsize.erase.pattern=
|
||||
|
||||
tools.openocd-withbootsize.bootloader.params.verbose=-d2
|
||||
tools.openocd-withbootsize.bootloader.params.quiet=-d0
|
||||
tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
@@ -0,0 +1,649 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
# Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
# Copyright (c) 2017 Adafruit Industries. All right reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
menu.softdevice=Bootloader
|
||||
menu.debug=Debug
|
||||
|
||||
# ----------------------------------
|
||||
# Bluefruit Feather nRF52832
|
||||
# ----------------------------------
|
||||
feather52832.name=Adafruit Feather nRF52832
|
||||
feather52832.bootloader.tool=bootburn
|
||||
|
||||
# Upload
|
||||
feather52832.upload.tool=nrfutil
|
||||
feather52832.upload.protocol=nrfutil
|
||||
feather52832.upload.use_1200bps_touch=false
|
||||
feather52832.upload.wait_for_upload_port=false
|
||||
feather52832.upload.native_usb=false
|
||||
feather52832.upload.maximum_size=290816
|
||||
feather52832.upload.maximum_data_size=52224
|
||||
|
||||
# Build
|
||||
feather52832.build.mcu=cortex-m4
|
||||
feather52832.build.f_cpu=64000000
|
||||
feather52832.build.board=NRF52832_FEATHER
|
||||
feather52832.build.core=nRF5
|
||||
feather52832.build.variant=feather_nrf52832
|
||||
feather52840.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52840.build.usb_product="Feather nRF52832"
|
||||
feather52832.build.extra_flags=-DNRF52832_XXAA -DNRF52832_FEATHER -DNRF52
|
||||
feather52832.build.ldscript=nrf52832_s132_v6.ld
|
||||
|
||||
# SofDevice Menu
|
||||
feather52832.menu.softdevice.s132v6=0.3.2 SoftDevice s132 6.1.1
|
||||
feather52832.menu.softdevice.s132v6.build.sd_name=s132
|
||||
feather52832.menu.softdevice.s132v6.build.sd_version=6.1.1
|
||||
feather52832.menu.softdevice.s132v6.build.sd_fwid=0x00B7
|
||||
|
||||
# Debug Menu
|
||||
feather52832.menu.debug.l0=Level 0 (Release)
|
||||
feather52832.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
feather52832.menu.debug.l1=Level 1 (Error Message)
|
||||
feather52832.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
feather52832.menu.debug.l2=Level 2 (Full Debug)
|
||||
feather52832.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
feather52832.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
feather52832.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
feather52832.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Bluefruit Feather nRF52840 Express
|
||||
# ----------------------------------
|
||||
feather52840.name=Adafruit Feather nRF52840 Express
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
feather52840.vid.0=0x239A
|
||||
feather52840.pid.0=0x8029
|
||||
feather52840.vid.1=0x239A
|
||||
feather52840.pid.1=0x0029
|
||||
feather52840.vid.2=0x239A
|
||||
feather52840.pid.2=0x002A
|
||||
feather52840.vid.3=0x239A
|
||||
feather52840.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
feather52840.bootloader.tool=bootburn
|
||||
feather52840.upload.tool=nrfutil
|
||||
feather52840.upload.protocol=nrfutil
|
||||
feather52840.upload.use_1200bps_touch=true
|
||||
feather52840.upload.wait_for_upload_port=true
|
||||
feather52840.upload.maximum_size=815104
|
||||
feather52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
feather52840.build.mcu=cortex-m4
|
||||
feather52840.build.f_cpu=64000000
|
||||
feather52840.build.board=NRF52840_FEATHER
|
||||
feather52840.build.core=nRF5
|
||||
feather52840.build.variant=feather_nrf52840_express
|
||||
feather52840.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52840.build.usb_product="Feather nRF52840 Express"
|
||||
feather52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_FEATHER {build.flags.usb}
|
||||
feather52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
feather52840.build.vid=0x239A
|
||||
feather52840.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
feather52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
feather52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
feather52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
feather52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
feather52840.menu.debug.l0=Level 0 (Release)
|
||||
feather52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
feather52840.menu.debug.l1=Level 1 (Error Message)
|
||||
feather52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
feather52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
feather52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
feather52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
feather52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
feather52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
# ----------------------------------
|
||||
# Feather Bluefruit sense
|
||||
# ----------------------------------
|
||||
feather52840sense.name=Adafruit Feather Bluefruit Sense
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
feather52840sense.vid.0=0x239A
|
||||
feather52840sense.pid.0=0x8087
|
||||
feather52840sense.vid.1=0x239A
|
||||
feather52840sense.pid.1=0x0087
|
||||
feather52840sense.vid.2=0x239A
|
||||
feather52840sense.pid.2=0x0088
|
||||
feather52840sense.vid.3=0x239A
|
||||
feather52840sense.pid.3=0x8088
|
||||
|
||||
# Upload
|
||||
feather52840sense.bootloader.tool=bootburn
|
||||
feather52840sense.upload.tool=nrfutil
|
||||
feather52840sense.upload.protocol=nrfutil
|
||||
feather52840sense.upload.use_1200bps_touch=true
|
||||
feather52840sense.upload.wait_for_upload_port=true
|
||||
feather52840sense.upload.maximum_size=815104
|
||||
feather52840sense.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
feather52840sense.build.mcu=cortex-m4
|
||||
feather52840sense.build.f_cpu=64000000
|
||||
feather52840sense.build.board=NRF52840_FEATHER_SENSE
|
||||
feather52840sense.build.core=nRF5
|
||||
feather52840sense.build.variant=feather_nrf52840_sense
|
||||
feather52840sense.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52840sense.build.usb_product="Feather nRF52840 Sense"
|
||||
feather52840sense.build.extra_flags=-DNRF52840_XXAA -DNRF52840_FEATHER_SENSE {build.flags.usb}
|
||||
feather52840sense.build.ldscript=nrf52840_s140_v6.ld
|
||||
feather52840sense.build.vid=0x239A
|
||||
feather52840sense.build.pid=0x8087
|
||||
|
||||
# SofDevice Menu
|
||||
feather52840sense.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
feather52840sense.menu.softdevice.s140v6.build.sd_name=s140
|
||||
feather52840sense.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
feather52840sense.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
feather52840sense.menu.debug.l0=Level 0 (Release)
|
||||
feather52840sense.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
feather52840sense.menu.debug.l1=Level 1 (Error Message)
|
||||
feather52840sense.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
feather52840sense.menu.debug.l2=Level 2 (Full Debug)
|
||||
feather52840sense.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
feather52840sense.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
feather52840sense.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
feather52840sense.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
# ---------------------------------------------
|
||||
# Bluefruit ItsyBitsy nRF52840 Express
|
||||
# ---------------------------------------------
|
||||
itsybitsy52840.name=Adafruit ItsyBitsy nRF52840 Express
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
itsybitsy52840.vid.0=0x239A
|
||||
itsybitsy52840.pid.0=0x8051
|
||||
itsybitsy52840.vid.1=0x239A
|
||||
itsybitsy52840.pid.1=0x0051
|
||||
itsybitsy52840.vid.2=0x239A
|
||||
itsybitsy52840.pid.2=0x0052
|
||||
itsybitsy52840.vid.3=0x239A
|
||||
itsybitsy52840.pid.3=0x8052
|
||||
|
||||
# Upload
|
||||
itsybitsy52840.bootloader.tool=bootburn
|
||||
itsybitsy52840.upload.tool=nrfutil
|
||||
itsybitsy52840.upload.protocol=nrfutil
|
||||
itsybitsy52840.upload.use_1200bps_touch=true
|
||||
itsybitsy52840.upload.wait_for_upload_port=true
|
||||
itsybitsy52840.upload.maximum_size=815104
|
||||
itsybitsy52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
itsybitsy52840.build.mcu=cortex-m4
|
||||
itsybitsy52840.build.f_cpu=64000000
|
||||
itsybitsy52840.build.board=NRF52840_ITSYBITSY
|
||||
itsybitsy52840.build.core=nRF5
|
||||
itsybitsy52840.build.variant=itsybitsy_nrf52840_express
|
||||
itsybitsy52840.build.usb_manufacturer="Adafruit LLC"
|
||||
itsybitsy52840.build.usb_product="ItsyBitsy nRF52840 Express"
|
||||
itsybitsy52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_ITSYBITSY -DARDUINO_NRF52_ITSYBITSY {build.flags.usb}
|
||||
itsybitsy52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
itsybitsy52840.build.vid=0x239A
|
||||
itsybitsy52840.build.pid=0x8051
|
||||
|
||||
# SofDevice Menu
|
||||
itsybitsy52840.menu.softdevice.s140v6=0.2.11 SoftDevice s140 6.1.1
|
||||
itsybitsy52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
itsybitsy52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
itsybitsy52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
itsybitsy52840.menu.debug.l0=Level 0 (Release)
|
||||
itsybitsy52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
itsybitsy52840.menu.debug.l1=Level 1 (Error Message)
|
||||
itsybitsy52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
itsybitsy52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
itsybitsy52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
itsybitsy52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
itsybitsy52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
itsybitsy52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ---------------------------------------------
|
||||
# Bluefruit Circuit Playground nRF52840 Express
|
||||
# ---------------------------------------------
|
||||
cplaynrf52840.name=Adafruit Circuit Playground Bluefruit
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
cplaynrf52840.vid.0=0x239A
|
||||
cplaynrf52840.pid.0=0x8045
|
||||
cplaynrf52840.vid.1=0x239A
|
||||
cplaynrf52840.pid.1=0x0045
|
||||
cplaynrf52840.vid.2=0x239A
|
||||
cplaynrf52840.pid.2=0x0046
|
||||
cplaynrf52840.vid.3=0x239A
|
||||
cplaynrf52840.pid.3=0x8046
|
||||
|
||||
# Upload
|
||||
cplaynrf52840.bootloader.tool=bootburn
|
||||
cplaynrf52840.upload.tool=nrfutil
|
||||
cplaynrf52840.upload.protocol=nrfutil
|
||||
cplaynrf52840.upload.use_1200bps_touch=true
|
||||
cplaynrf52840.upload.wait_for_upload_port=true
|
||||
cplaynrf52840.upload.maximum_size=815104
|
||||
cplaynrf52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
cplaynrf52840.build.mcu=cortex-m4
|
||||
cplaynrf52840.build.f_cpu=64000000
|
||||
cplaynrf52840.build.board=NRF52840_CIRCUITPLAY
|
||||
cplaynrf52840.build.core=nRF5
|
||||
cplaynrf52840.build.variant=circuitplayground_nrf52840
|
||||
cplaynrf52840.build.usb_manufacturer="Adafruit LLC"
|
||||
cplaynrf52840.build.usb_product="Circuit Playground Bluefruit"
|
||||
cplaynrf52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_CIRCUITPLAY {build.flags.usb}
|
||||
cplaynrf52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
cplaynrf52840.build.vid=0x239A
|
||||
cplaynrf52840.build.pid=0x8045
|
||||
|
||||
# SofDevice Menu
|
||||
cplaynrf52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
cplaynrf52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
cplaynrf52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
cplaynrf52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
cplaynrf52840.menu.debug.l0=Level 0 (Release)
|
||||
cplaynrf52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
cplaynrf52840.menu.debug.l1=Level 1 (Error Message)
|
||||
cplaynrf52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
cplaynrf52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
cplaynrf52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
cplaynrf52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
cplaynrf52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
cplaynrf52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
# ---------------------------------------------
|
||||
# Clue nRF52840
|
||||
# ---------------------------------------------
|
||||
cluenrf52840.name=Adafruit CLUE
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
cluenrf52840.vid.0=0x239A
|
||||
cluenrf52840.pid.0=0x8072
|
||||
cluenrf52840.vid.1=0x239A
|
||||
cluenrf52840.pid.1=0x0072
|
||||
cluenrf52840.vid.2=0x239A
|
||||
cluenrf52840.pid.2=0x0071
|
||||
cluenrf52840.vid.3=0x239A
|
||||
cluenrf52840.pid.3=0x8071
|
||||
|
||||
# Upload
|
||||
cluenrf52840.bootloader.tool=bootburn
|
||||
cluenrf52840.upload.tool=nrfutil
|
||||
cluenrf52840.upload.protocol=nrfutil
|
||||
cluenrf52840.upload.use_1200bps_touch=true
|
||||
cluenrf52840.upload.wait_for_upload_port=true
|
||||
cluenrf52840.upload.maximum_size=815104
|
||||
cluenrf52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
cluenrf52840.build.mcu=cortex-m4
|
||||
cluenrf52840.build.f_cpu=64000000
|
||||
cluenrf52840.build.board=NRF52840_CLUE
|
||||
cluenrf52840.build.core=nRF5
|
||||
cluenrf52840.build.variant=clue_nrf52840
|
||||
cluenrf52840.build.usb_manufacturer="Adafruit LLC"
|
||||
cluenrf52840.build.usb_product="CLUE"
|
||||
cluenrf52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_CLUE {build.flags.usb}
|
||||
cluenrf52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
cluenrf52840.build.vid=0x239A
|
||||
cluenrf52840.build.pid=0x8071
|
||||
|
||||
# SofDevice Menu
|
||||
cluenrf52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
cluenrf52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
cluenrf52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
cluenrf52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
cluenrf52840.menu.debug.l0=Level 0 (Release)
|
||||
cluenrf52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
cluenrf52840.menu.debug.l1=Level 1 (Error Message)
|
||||
cluenrf52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
cluenrf52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
cluenrf52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
cluenrf52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
cluenrf52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
cluenrf52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Bluefruit Metro nRF52840 Express
|
||||
# ----------------------------------
|
||||
metro52840.name=Adafruit Bluefruit Metro nRF52840 Express
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
metro52840.vid.0=0x239A
|
||||
metro52840.pid.0=0x803F
|
||||
metro52840.vid.1=0x239A
|
||||
metro52840.pid.1=0x003F
|
||||
metro52840.vid.2=0x239A
|
||||
metro52840.pid.2=0x0040
|
||||
metro52840.vid.3=0x239A
|
||||
metro52840.pid.3=0x8040
|
||||
|
||||
# Upload
|
||||
metro52840.bootloader.tool=bootburn
|
||||
metro52840.upload.tool=nrfutil
|
||||
metro52840.upload.protocol=nrfutil
|
||||
metro52840.upload.use_1200bps_touch=true
|
||||
metro52840.upload.wait_for_upload_port=true
|
||||
metro52840.upload.maximum_size=815104
|
||||
metro52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
metro52840.build.mcu=cortex-m4
|
||||
metro52840.build.f_cpu=64000000
|
||||
metro52840.build.board=NRF52840_METRO
|
||||
metro52840.build.core=nRF5
|
||||
metro52840.build.variant=metro_nrf52840_express
|
||||
metro52840.build.usb_manufacturer="Adafruit LLC"
|
||||
metro52840.build.usb_product="Metro nRF52840 Express"
|
||||
metro52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_METRO {build.flags.usb}
|
||||
metro52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
metro52840.build.vid=0x239A
|
||||
metro52840.build.pid=0x803F
|
||||
|
||||
# SofDevice Menu
|
||||
metro52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
metro52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
metro52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
metro52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
metro52840.menu.debug.l0=Level 0 (Release)
|
||||
metro52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
metro52840.menu.debug.l1=Level 1 (Error Message)
|
||||
metro52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
metro52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
metro52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
metro52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
metro52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
metro52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
|
||||
|
||||
# -------------------------------------------------------
|
||||
#
|
||||
# Boards that aren't made by Adafruit
|
||||
#
|
||||
# -------------------------------------------------------
|
||||
|
||||
|
||||
# ----------------------------------
|
||||
# Nordic nRF52840DK (PCA10056)
|
||||
# ----------------------------------
|
||||
pca10056.name=Nordic nRF52840DK (PCA10056)
|
||||
pca10056.bootloader.tool=bootburn
|
||||
|
||||
# Upload
|
||||
pca10056.upload.tool=nrfutil
|
||||
pca10056.upload.protocol=nrfutil
|
||||
pca10056.upload.use_1200bps_touch=true
|
||||
pca10056.upload.wait_for_upload_port=true
|
||||
pca10056.upload.maximum_size=815104
|
||||
pca10056.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
pca10056.build.mcu=cortex-m4
|
||||
pca10056.build.f_cpu=64000000
|
||||
pca10056.build.board=NRF52840_PCA10056
|
||||
pca10056.build.core=nRF5
|
||||
pca10056.build.variant=pca10056
|
||||
pca10056.build.usb_manufacturer="Nordic"
|
||||
pca10056.build.usb_product="nRF52840 DK"
|
||||
pca10056.build.extra_flags=-DNRF52840_XXAA -DNRF52840_PCA10056 {build.flags.usb}
|
||||
pca10056.build.ldscript=nrf52840_s140_v6.ld
|
||||
pca10056.build.vid=0x239A
|
||||
pca10056.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
pca10056.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
pca10056.menu.softdevice.s140v6.build.sd_name=s140
|
||||
pca10056.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
pca10056.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
pca10056.menu.debug.l0=Level 0 (Release)
|
||||
pca10056.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
pca10056.menu.debug.l1=Level 1 (Error Message)
|
||||
pca10056.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
pca10056.menu.debug.l2=Level 2 (Full Debug)
|
||||
pca10056.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
pca10056.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
pca10056.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
pca10056.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Particle Xenon
|
||||
# ----------------------------------
|
||||
particle_xenon.name=Particle Xenon
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
particle_xenon.vid.0=0x239A
|
||||
particle_xenon.pid.0=0x8029
|
||||
particle_xenon.vid.1=0x239A
|
||||
particle_xenon.pid.1=0x0029
|
||||
particle_xenon.vid.2=0x239A
|
||||
particle_xenon.pid.2=0x002A
|
||||
particle_xenon.vid.3=0x239A
|
||||
particle_xenon.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
particle_xenon.bootloader.tool=bootburn
|
||||
particle_xenon.upload.tool=nrfutil
|
||||
particle_xenon.upload.protocol=nrfutil
|
||||
particle_xenon.upload.use_1200bps_touch=true
|
||||
particle_xenon.upload.wait_for_upload_port=true
|
||||
particle_xenon.upload.maximum_size=815104
|
||||
particle_xenon.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
particle_xenon.build.mcu=cortex-m4
|
||||
particle_xenon.build.f_cpu=64000000
|
||||
particle_xenon.build.board=PARTICLE_XENON
|
||||
particle_xenon.build.core=nRF5
|
||||
particle_xenon.build.variant=particle_xenon
|
||||
particle_xenon.build.usb_manufacturer="Particle Industries"
|
||||
particle_xenon.build.usb_product="Particle Xenon"
|
||||
particle_xenon.build.extra_flags=-DNRF52840_XXAA -DPARTICLE_XENON {build.flags.usb}
|
||||
particle_xenon.build.ldscript=nrf52840_s140_v6.ld
|
||||
particle_xenon.build.vid=0x239A
|
||||
particle_xenon.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
particle_xenon.menu.softdevice.s140v6=0.2.11 SoftDevice s140 6.1.1
|
||||
particle_xenon.menu.softdevice.s140v6.build.sd_name=s140
|
||||
particle_xenon.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
particle_xenon.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
particle_xenon.menu.debug.l0=Level 0 (Release)
|
||||
particle_xenon.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
particle_xenon.menu.debug.l1=Level 1 (Error Message)
|
||||
particle_xenon.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
particle_xenon.menu.debug.l2=Level 2 (Full Debug)
|
||||
particle_xenon.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
particle_xenon.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
particle_xenon.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
particle_xenon.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Raytac MDBT50Q - RX
|
||||
# ----------------------------------
|
||||
mdbt50qrx.name=Raytac MDBT50Q-RX Dongle
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
mdbt50qrx.vid.0=0x239A
|
||||
mdbt50qrx.pid.0=0x8029
|
||||
mdbt50qrx.vid.1=0x239A
|
||||
mdbt50qrx.pid.1=0x0029
|
||||
mdbt50qrx.vid.2=0x239A
|
||||
mdbt50qrx.pid.2=0x002A
|
||||
mdbt50qrx.vid.3=0x239A
|
||||
mdbt50qrx.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
mdbt50qrx.bootloader.tool=bootburn
|
||||
mdbt50qrx.upload.tool=nrfutil
|
||||
mdbt50qrx.upload.protocol=nrfutil
|
||||
mdbt50qrx.upload.use_1200bps_touch=true
|
||||
mdbt50qrx.upload.wait_for_upload_port=true
|
||||
mdbt50qrx.upload.maximum_size=815104
|
||||
mdbt50qrx.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
mdbt50qrx.build.mcu=cortex-m4
|
||||
mdbt50qrx.build.f_cpu=64000000
|
||||
mdbt50qrx.build.board=MDBT50Q_RX
|
||||
mdbt50qrx.build.core=nRF5
|
||||
mdbt50qrx.build.variant=raytac_mdbt50q_rx
|
||||
mdbt50qrx.build.usb_manufacturer="Raytac Corporation"
|
||||
mdbt50qrx.build.usb_product="Raytac MDBT50Q - RX"
|
||||
mdbt50qrx.build.extra_flags=-DNRF52840_XXAA -DMDBT50Q_RX {build.flags.usb}
|
||||
mdbt50qrx.build.ldscript=nrf52840_s140_v6.ld
|
||||
mdbt50qrx.build.vid=0x239A
|
||||
mdbt50qrx.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
mdbt50qrx.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
mdbt50qrx.menu.softdevice.s140v6.build.sd_name=s140
|
||||
mdbt50qrx.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
mdbt50qrx.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
mdbt50qrx.menu.debug.l0=Level 0 (Release)
|
||||
mdbt50qrx.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
mdbt50qrx.menu.debug.l1=Level 1 (Error Message)
|
||||
mdbt50qrx.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
mdbt50qrx.menu.debug.l2=Level 2 (Full Debug)
|
||||
mdbt50qrx.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
mdbt50qrx.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
mdbt50qrx.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
mdbt50qrx.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# NINA B302
|
||||
# ----------------------------------
|
||||
ninab302.name=NINA B302 ublox
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
ninab302.vid.0=0x239A
|
||||
ninab302.pid.0=0x8029
|
||||
ninab302.vid.1=0x239A
|
||||
ninab302.pid.1=0x0029
|
||||
ninab302.vid.2=0x7239A
|
||||
ninab302.pid.2=0x002A
|
||||
ninab302.vid.3=0x239A
|
||||
ninab302.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
ninab302.bootloader.tool=bootburn
|
||||
ninab302.upload.tool=nrfutil
|
||||
ninab302.upload.protocol=nrfutil
|
||||
ninab302.upload.use_1200bps_touch=true
|
||||
ninab302.upload.wait_for_upload_port=true
|
||||
ninab302.upload.maximum_size=815104
|
||||
ninab302.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
ninab302.build.mcu=cortex-m4
|
||||
ninab302.build.f_cpu=64000000
|
||||
ninab302.build.board=NINA_B302_ublox
|
||||
ninab302.build.core=nRF5
|
||||
ninab302.build.variant=NINA_B302_ublox
|
||||
ninab302.build.usb_manufacturer="Nordic"
|
||||
ninab302.build.usb_product="NINA B302 ublox"
|
||||
ninab302.build.extra_flags=-DNRF52840_XXAA -DNINA_B302_ublox {build.flags.usb}
|
||||
ninab302.build.ldscript=nrf52840_s140_v6.ld
|
||||
ninab302.build.vid=0x239A
|
||||
ninab302.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
ninab302.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
ninab302.menu.softdevice.s140v6.build.sd_name=s140
|
||||
ninab302.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
ninab302.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
ninab302.menu.debug.l0=Level 0 (Release)
|
||||
ninab302.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
ninab302.menu.debug.l1=Level 1 (Error Message)
|
||||
ninab302.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
ninab302.menu.debug.l2=Level 2 (Full Debug)
|
||||
ninab302.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
ninab302.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
ninab302.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
ninab302.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# NINA B112
|
||||
# ----------------------------------
|
||||
ninab112.name=NINA B112 ublox
|
||||
ninab112.bootloader.tool=bootburn
|
||||
|
||||
# Upload
|
||||
ninab112.upload.tool=nrfutil
|
||||
ninab112.upload.protocol=nrfutil
|
||||
ninab112.upload.use_1200bps_touch=false
|
||||
ninab112.upload.wait_for_upload_port=false
|
||||
ninab112.upload.native_usb=false
|
||||
ninab112.upload.maximum_size=290816
|
||||
ninab112.upload.maximum_data_size=52224
|
||||
|
||||
# Build
|
||||
ninab112.build.mcu=cortex-m4
|
||||
ninab112.build.f_cpu=64000000
|
||||
ninab112.build.board=NINA_B112_ublox
|
||||
ninab112.build.core=nRF5
|
||||
ninab112.build.variant=NINA_B112_ublox
|
||||
feather52840.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52840.build.usb_product="Feather nRF52832"
|
||||
ninab112.build.extra_flags=-DNRF52832_XXAA -DNINA_B112_ublox -DNRF52
|
||||
ninab112.build.ldscript=nrf52832_s132_v6.ld
|
||||
|
||||
# SofDevice Menu
|
||||
ninab112.menu.softdevice.s132v6=0.3.2 SoftDevice s132 6.1.1
|
||||
ninab112.menu.softdevice.s132v6.build.sd_name=s132
|
||||
ninab112.menu.softdevice.s132v6.build.sd_version=6.1.1
|
||||
ninab112.menu.softdevice.s132v6.build.sd_fwid=0x00B7
|
||||
|
||||
# Debug Menu
|
||||
ninab112.menu.debug.l0=Level 0 (Release)
|
||||
ninab112.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
ninab112.menu.debug.l1=Level 1 (Error Message)
|
||||
ninab112.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
ninab112.menu.debug.l2=Level 2 (Full Debug)
|
||||
ninab112.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
ninab112.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
ninab112.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
ninab112.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
@@ -0,0 +1,92 @@
|
||||
/*
|
||||
* Udp.cpp: Library to send/receive UDP packets.
|
||||
*
|
||||
* NOTE: UDP is fast, but has some important limitations (thanks to Warren Gray for mentioning these)
|
||||
* 1) UDP does not guarantee the order in which assembled UDP packets are received. This
|
||||
* might not happen often in practice, but in larger network topologies, a UDP
|
||||
* packet can be received out of sequence.
|
||||
* 2) UDP does not guard against lost packets - so packets *can* disappear without the sender being
|
||||
* aware of it. Again, this may not be a concern in practice on small local networks.
|
||||
* For more information, see http://www.cafeaulait.org/course/week12/35.html
|
||||
*
|
||||
* MIT License:
|
||||
* Copyright (c) 2008 Bjoern Hartmann
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* bjoern@cs.stanford.edu 12/30/2008
|
||||
*/
|
||||
|
||||
#ifndef udp_h
|
||||
#define udp_h
|
||||
|
||||
#include <Stream.h>
|
||||
#include <IPAddress.h>
|
||||
|
||||
class UDP : public Stream {
|
||||
|
||||
public:
|
||||
virtual uint8_t begin(uint16_t) =0; // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
|
||||
|
||||
// KH, add virtual function to support Multicast, necessary for many services (MDNS, etc.)
|
||||
virtual uint8_t beginMulticast(IPAddress, uint16_t) { return 0; } // initialize, start listening on specified multicast IP address and port. Returns 1 if successful, 0 on failure
|
||||
|
||||
virtual void stop() =0; // Finish with the UDP socket
|
||||
|
||||
// Sending UDP packets
|
||||
|
||||
// Start building up a packet to send to the remote host specific in ip and port
|
||||
// Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
|
||||
virtual int beginPacket(IPAddress ip, uint16_t port) =0;
|
||||
// Start building up a packet to send to the remote host specific in host and port
|
||||
// Returns 1 if successful, 0 if there was a problem resolving the hostname or port
|
||||
virtual int beginPacket(const char *host, uint16_t port) =0;
|
||||
// Finish off this packet and send it
|
||||
// Returns 1 if the packet was sent successfully, 0 if there was an error
|
||||
virtual int endPacket() =0;
|
||||
// Write a single byte into the packet
|
||||
virtual size_t write(uint8_t) =0;
|
||||
// Write size bytes from buffer into the packet
|
||||
virtual size_t write(const uint8_t *buffer, size_t size) =0;
|
||||
|
||||
// Start processing the next available incoming packet
|
||||
// Returns the size of the packet in bytes, or 0 if no packets are available
|
||||
virtual int parsePacket() =0;
|
||||
// Number of bytes remaining in the current packet
|
||||
virtual int available() =0;
|
||||
// Read a single byte from the current packet
|
||||
virtual int read() =0;
|
||||
// Read up to len bytes from the current packet and place them into buffer
|
||||
// Returns the number of bytes read, or 0 if none are available
|
||||
virtual int read(unsigned char* buffer, size_t len) =0;
|
||||
// Read up to len characters from the current packet and place them into buffer
|
||||
// Returns the number of characters read, or 0 if none are available
|
||||
virtual int read(char* buffer, size_t len) =0;
|
||||
// Return the next byte from the current packet without moving on to the next byte
|
||||
virtual int peek() =0;
|
||||
virtual void flush() =0; // Finish reading the current packet
|
||||
|
||||
// Return the IP address of the host who sent the current incoming packet
|
||||
virtual IPAddress remoteIP() =0;
|
||||
// Return the port of the host who sent the current incoming packet
|
||||
virtual uint16_t remotePort() =0;
|
||||
protected:
|
||||
uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,164 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
# Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
# Copyright (c) 2017 Adafruit Industries. All rights reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
name=Adafruit nRF52 Boards
|
||||
version=0.20.5
|
||||
|
||||
# Compile variables
|
||||
# -----------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall
|
||||
compiler.warning_flags.all=-Wall -Wextra -Wno-unused-parameter -Wno-missing-field-initializers -Wno-pointer-arith
|
||||
|
||||
compiler.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.warning_flags} {build.float_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
|
||||
# KH, Error here to use gcc, mjust use g++
|
||||
#compiler.c.elf.cmd=arm-none-eabi-gcc
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags=-Ofast -Wl,--gc-sections -save-temps
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.warning_flags} {build.float_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
compiler.objcopy.cmd=arm-none-eabi-objcopy
|
||||
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
|
||||
compiler.elf2bin.flags=-O binary
|
||||
compiler.elf2bin.cmd=arm-none-eabi-objcopy
|
||||
compiler.elf2hex.flags=-O ihex
|
||||
compiler.elf2hex.cmd=arm-none-eabi-objcopy
|
||||
compiler.ldflags=-mcpu={build.mcu} -mthumb {build.float_flags} -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align --specs=nano.specs --specs=nosys.specs
|
||||
compiler.size.cmd=arm-none-eabi-size
|
||||
|
||||
# this can be overriden in boards.txt
|
||||
build.float_flags=-mfloat-abi=hard -mfpu=fpv4-sp-d16 -u _printf_float
|
||||
build.debug_flags=-DCFG_DEBUG=0
|
||||
build.logger_flags=-DCFG_LOGGER=1
|
||||
build.sysview_flags=-DCFG_SYSVIEW=0
|
||||
|
||||
# common compiler for nrf
|
||||
rtos.path={build.core.path}/freertos
|
||||
nordic.path={build.core.path}/nordic
|
||||
|
||||
# build.logger_flags and build.sysview_flags and intentionally empty,
|
||||
# to allow modification via a user's own boards.local.txt or platform.local.txt files.
|
||||
build.flags.nrf= -DSOFTDEVICE_PRESENT -DARDUINO_NRF52_ADAFRUIT -DNRF52_SERIES -DLFS_NAME_MAX=64 -Ofast {build.debug_flags} {build.logger_flags} {build.sysview_flags} "-I{build.core.path}/cmsis/Core/Include" "-I{nordic.path}" "-I{nordic.path}/nrfx" "-I{nordic.path}/nrfx/hal" "-I{nordic.path}/nrfx/mdk" "-I{nordic.path}/nrfx/soc" "-I{nordic.path}/nrfx/drivers/include" "-I{nordic.path}/nrfx/drivers/src" "-I{nordic.path}/softdevice/{build.sd_name}_nrf52_{build.sd_version}_API/include" "-I{rtos.path}/Source/include" "-I{rtos.path}/config" "-I{rtos.path}/portable/GCC/nrf52" "-I{rtos.path}/portable/CMSIS/nrf52" "-I{build.core.path}/sysview/SEGGER" "-I{build.core.path}/sysview/Config" "-I{build.core.path}/TinyUSB" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src"
|
||||
|
||||
# usb flags
|
||||
build.flags.usb= -DUSBCON -DUSE_TINYUSB -DUSB_VID={build.vid} -DUSB_PID={build.pid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
|
||||
|
||||
# These can be overridden in platform.local.txt
|
||||
compiler.c.extra_flags=
|
||||
compiler.c.elf.extra_flags=
|
||||
compiler.cpp.extra_flags=
|
||||
compiler.S.extra_flags=
|
||||
compiler.ar.extra_flags=
|
||||
compiler.elf2bin.extra_flags=
|
||||
compiler.elf2hex.extra_flags=
|
||||
|
||||
|
||||
# Compile patterns
|
||||
# ----------------
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.c.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.c.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile c++ files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.cpp.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.cpp.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile S files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Create archives
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Combine gc-sections, archives, and objects
|
||||
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-L{build.core.path}/linker" "-T{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} -Wl,--start-group -lm "{build.path}/{archive_file}" -Wl,--end-group
|
||||
|
||||
## Create output (bin file)
|
||||
#recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2bin.cmd}" {compiler.elf2bin.flags} {compiler.elf2bin.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
|
||||
|
||||
## Create output (hex file)
|
||||
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
## Create dfu package zip file
|
||||
recipe.objcopy.zip.pattern="{tools.nrfutil.cmd}" dfu genpkg --dev-type 0x0052 --sd-req {build.sd_fwid} --application "{build.path}/{build.project_name}.hex" "{build.path}/{build.project_name}.zip"
|
||||
|
||||
## Create uf2 file
|
||||
#recipe.objcopy.uf2.pattern=python "{runtime.platform.path}/tools/uf2conv/uf2conv.py" -f 0xADA52840 -c -o "{build.path}/{build.project_name}.uf2" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
## Save bin
|
||||
recipe.output.tmp_file_bin={build.project_name}.bin
|
||||
recipe.output.save_file_bin={build.project_name}.save.bin
|
||||
|
||||
## Save hex
|
||||
recipe.output.tmp_file_hex={build.project_name}.hex
|
||||
recipe.output.save_file_hexu={build.project_name}.save.hex
|
||||
|
||||
## Compute size
|
||||
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
|
||||
recipe.size.regex=^(?:\.text|\.data|)\s+([0-9]+).*
|
||||
recipe.size.regex.data=^(?:\.data|\.bss)\s+([0-9]+).*
|
||||
|
||||
## Export Compiled Binary
|
||||
recipe.output.tmp_file={build.project_name}.hex
|
||||
recipe.output.save_file={build.project_name}.{build.variant}.hex
|
||||
|
||||
#***************************************************
|
||||
# adafruit-nrfutil for uploading
|
||||
# https://github.com/adafruit/Adafruit_nRF52_nrfutil
|
||||
# pre-built binaries are provided for macos and windows
|
||||
#***************************************************
|
||||
tools.nrfutil.cmd=adafruit-nrfutil
|
||||
tools.nrfutil.cmd.windows={runtime.platform.path}/tools/adafruit-nrfutil/win32/adafruit-nrfutil.exe
|
||||
tools.nrfutil.cmd.macosx={runtime.platform.path}/tools/adafruit-nrfutil/macos/adafruit-nrfutil
|
||||
|
||||
tools.nrfutil.upload.params.verbose=--verbose
|
||||
tools.nrfutil.upload.params.quiet=
|
||||
tools.nrfutil.upload.pattern="{cmd}" {upload.verbose} dfu serial -pkg "{build.path}/{build.project_name}.zip" -p {serial.port} -b 115200 --singlebank
|
||||
|
||||
#***************************************************
|
||||
# Burning bootloader with either jlink or nrfutil
|
||||
#***************************************************
|
||||
|
||||
# Bootloader version
|
||||
tools.bootburn.bootloader.file={runtime.platform.path}/bootloader/{build.variant}/{build.variant}_bootloader-0.3.2_{build.sd_name}_{build.sd_version}
|
||||
|
||||
tools.bootburn.bootloader.params.verbose=
|
||||
tools.bootburn.bootloader.params.quiet=
|
||||
tools.bootburn.bootloader.pattern={program.burn_pattern}
|
||||
|
||||
# erase flash page while programming
|
||||
tools.bootburn.erase.params.verbose=
|
||||
tools.bootburn.erase.params.quiet=
|
||||
tools.bootburn.erase.pattern=
|
||||
|
||||
+17
@@ -0,0 +1,17 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// API compatibility
|
||||
#include "variant.h"
|
||||
@@ -0,0 +1,62 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip).
|
||||
// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
|
||||
|
||||
#include "variant.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
#include "nrf.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
0,
|
||||
1,
|
||||
2,
|
||||
3,
|
||||
4,
|
||||
5,
|
||||
6,
|
||||
7,
|
||||
8,
|
||||
9,
|
||||
10,
|
||||
11,
|
||||
12,
|
||||
13,
|
||||
14,
|
||||
15,
|
||||
16,
|
||||
17,
|
||||
18,
|
||||
19,
|
||||
20,
|
||||
21,
|
||||
22,
|
||||
23,
|
||||
24,
|
||||
25,
|
||||
26,
|
||||
27,
|
||||
28,
|
||||
29,
|
||||
30,
|
||||
31
|
||||
};
|
||||
|
||||
@@ -0,0 +1,173 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _VARIANT_NINA_B112_UBLOX_
|
||||
#define _VARIANT_NINA_B112_UBLOX_
|
||||
|
||||
#define NRF_CLOCK_LFCLKSRC {.source = NRF_CLOCK_LF_SRC_XTAL, \
|
||||
.rc_ctiv = 0, \
|
||||
.rc_temp_ctiv = 0, \
|
||||
.xtal_accuracy = NRF_CLOCK_LF_XTAL_ACCURACY_20_PPM}
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
// define USE_LFRC // Board uses RC for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif // __cplusplus
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (32u)
|
||||
#define NUM_DIGITAL_PINS (32u)
|
||||
#define NUM_ANALOG_INPUTS (6u)
|
||||
#define NUM_ANALOG_OUTPUTS (0u)
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED LED1
|
||||
#define LED_BUILTIN PIN_LED
|
||||
|
||||
//LEDs onboard
|
||||
#define LED1 (8) // Red
|
||||
#define LED2 (16) // Green/SW1
|
||||
#define LED3 (18) // Blue
|
||||
|
||||
#define LED_STATE_ON 1 // State when LED is litted
|
||||
|
||||
//Switch
|
||||
|
||||
#define SW1 (16)
|
||||
#define SW2 (30)
|
||||
|
||||
// NFC
|
||||
#define PIN_NFC_1 (9) // P0.9
|
||||
#define PIN_NFC_2 (10) // P0.10
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A0 (3) // P0.03
|
||||
#define PIN_A1 (2) // P0.02
|
||||
#define PIN_A2 (4) // P0.04
|
||||
#define PIN_A3 (30) // P0.30
|
||||
#define PIN_A4 (29) // P0.29
|
||||
#define PIN_A5 (28) // P0.28
|
||||
|
||||
static const uint8_t A0 = PIN_A0 ;
|
||||
static const uint8_t A1 = PIN_A1 ;
|
||||
static const uint8_t A2 = PIN_A2 ;
|
||||
static const uint8_t A3 = PIN_A3 ;
|
||||
static const uint8_t A4 = PIN_A4 ;
|
||||
static const uint8_t A5 = PIN_A5 ;
|
||||
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
#define PIN_D0 (5) // P0.05
|
||||
#define PIN_D1 (6) // P0.06
|
||||
#define PIN_D2 (7) // P0.07
|
||||
#define PIN_D3 (31) // P0.31
|
||||
#define PIN_D4 (18) // P0.18
|
||||
#define PIN_D6 (9) // P0.09
|
||||
#define PIN_D7 (10) // P0.10
|
||||
#define PIN_D9 (8) // P0.8
|
||||
#define PIN_D10 (11) // P0.11
|
||||
#define PIN_D11 (13) // P0.13
|
||||
#define PIN_D12 (12) // P0.12
|
||||
#define PIN_D13 (14) // P0.14
|
||||
#define PIN_D14 (2) // P0.02
|
||||
#define PIN_D15 (3) // P0.03
|
||||
|
||||
static const uint8_t D0 = PIN_D0 ;
|
||||
static const uint8_t D1 = PIN_D1 ;
|
||||
static const uint8_t D2 = PIN_D2 ;
|
||||
static const uint8_t D3 = PIN_D3 ;
|
||||
static const uint8_t D4 = PIN_D4 ;
|
||||
static const uint8_t D6 = PIN_D6 ;
|
||||
static const uint8_t D7 = PIN_D7 ;
|
||||
static const uint8_t D9 = PIN_D9 ;
|
||||
static const uint8_t D10 = PIN_D10 ;
|
||||
static const uint8_t D11 = PIN_D11 ;
|
||||
static const uint8_t D12 = PIN_D12 ;
|
||||
static const uint8_t D13 = PIN_D13 ;
|
||||
static const uint8_t D14 = PIN_D14 ;
|
||||
static const uint8_t D15 = PIN_D15 ;
|
||||
|
||||
// Other pins
|
||||
//static const uint8_t AREF = PIN_AREF;
|
||||
|
||||
//#define PIN_AREF (24)
|
||||
//#define PIN_VBAT PIN_A7
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
//#define PIN_SERIAL_RX (8) //used for original Adafruit Bootloader
|
||||
//#define PIN_SERIAL_TX (6) //used for original Adafruit Bootloader
|
||||
|
||||
#define PIN_SERIAL_RX (5) // P0.05
|
||||
#define PIN_SERIAL_TX (6) // P0.06
|
||||
#define PIN_SERIAL_CTS (7) // P0.07
|
||||
#define PIN_SERIAL_RTS (31) // P0.31
|
||||
#define PIN_SERIAL_DTR (28) // P0.28
|
||||
#define PIN_SERIAL_DSR (29) // P0.29
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_SPI_MISO (12) // P0.12
|
||||
#define PIN_SPI_MOSI (13) // P0.13
|
||||
#define PIN_SPI_SCK (14) // P0.14
|
||||
|
||||
static const uint8_t SS = 11 ; // P0.11
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI ;
|
||||
static const uint8_t MISO = PIN_SPI_MISO ;
|
||||
static const uint8_t SCK = PIN_SPI_SCK ;
|
||||
|
||||
/*
|
||||
* Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (2) // P0.02
|
||||
#define PIN_WIRE_SCL (3) // P0.03
|
||||
|
||||
static const uint8_t SDA = PIN_WIRE_SDA;
|
||||
static const uint8_t SCL = PIN_WIRE_SCL;
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
|
||||
#endif //_VARIANT_NINA_B112_UBLOX_
|
||||
+17
@@ -0,0 +1,17 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// API compatibility
|
||||
#include "variant.h"
|
||||
@@ -0,0 +1,109 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip).
|
||||
// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
|
||||
|
||||
#include "variant.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
#include "nrf.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] =
|
||||
{
|
||||
// D0 .. D13
|
||||
29, // D0 is P0.29 (UART TX)
|
||||
45, // D1 is P1.13 (UART RX
|
||||
44, // D2 is P1.12 (NFC2)
|
||||
31, // D3 is P0.31 (LED1)
|
||||
13, // D4 is P0.13 (LED2)
|
||||
11, // D5 is P0.11
|
||||
9, // D6 is P0.09
|
||||
10, // D7 is P0.10 (Button)
|
||||
41, // D8 is P1.09 (NeoPixel)
|
||||
12, // D9 is P0.12
|
||||
14, // D10 is P0.14
|
||||
15, // D11 is P0.15
|
||||
32, // D12 is P1.00
|
||||
7, // D13 is P0.07
|
||||
|
||||
// D14 .. D21 (aka A0 .. A7)
|
||||
4, // D14 is P0.04 (A0)
|
||||
30, // D15 is P0.30 (A1)
|
||||
5, // D16 is P0.05 (A2)
|
||||
2, // D17 is P0.02 (A3)
|
||||
28, // D18 is P0.28 (A4)
|
||||
3, // D19 is P0.03 (A5)
|
||||
29, // D20 is P0.29 (A6, Battery) ????
|
||||
31, // D21 is P0.31 (A7, ARef) ????
|
||||
|
||||
// D22 .. D23 (aka I2C pins)
|
||||
16, // D22 is P0.16 (SDA)
|
||||
24, // D23 is P0.24 (SCL)
|
||||
|
||||
// D24 .. D26 (aka SPI pins)
|
||||
32, // D24 is P1.00 (SPI MISO)
|
||||
15, // D25 is P0.15 (SPI MOSI)
|
||||
7, // D26 is P0.07 (SPI SCK )
|
||||
|
||||
// QSPI pins (not exposed via any header / test point)
|
||||
19, // D27 is P0.19 (QSPI CLK)
|
||||
17, // D28 is P0.17 (QSPI CS)
|
||||
20, // D29 is P0.20 (QSPI Data 0)
|
||||
21, // D30 is P0.21 (QSPI Data 1)
|
||||
22, // D31 is P0.22 (QSPI Data 2)
|
||||
23, // D32 is P0.23 (QSPI Data 3)
|
||||
|
||||
// The remaining NFC pin
|
||||
9, // D33 is P0.09 (NFC1, exposed only via test point on bottom of board)
|
||||
|
||||
// Thus, there are 34 defined pins
|
||||
|
||||
// The remaining pins are not usable:
|
||||
//
|
||||
//
|
||||
// The following pins were never listed as they were considered unusable
|
||||
// 0, // P0.00 is XL1 (attached to 32.768kHz crystal)
|
||||
// 1, // P0.01 is XL2 (attached to 32.768kHz crystal)
|
||||
// 18, // P0.18 is RESET (attached to switch)
|
||||
// 32, // P1.00 is SWO (attached to debug header)
|
||||
//
|
||||
// The remaining pins are not connected (per schematic)
|
||||
// 33, // P1.01 is not connected per schematic
|
||||
// 35, // P1.03 is not connected per schematic
|
||||
// 36, // P1.04 is not connected per schematic
|
||||
// 37, // P1.05 is not connected per schematic
|
||||
// 38, // P1.06 is not connected per schematic
|
||||
// 39, // P1.07 is not connected per schematic
|
||||
// 43, // P1.11 is not connected per schematic
|
||||
// 44, // P1.12 is not connected per schematic
|
||||
// 45, // P1.13 is not connected per schematic
|
||||
// 46, // P1.14 is not connected per schematic
|
||||
};
|
||||
|
||||
void initVariant()
|
||||
{
|
||||
// LED1 & LED2
|
||||
pinMode(PIN_LED1, OUTPUT);
|
||||
ledOff(PIN_LED1);
|
||||
|
||||
pinMode(PIN_LED2, OUTPUT);
|
||||
ledOff(PIN_LED2);
|
||||
}
|
||||
|
||||
@@ -0,0 +1,159 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip).
|
||||
// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
|
||||
|
||||
#ifndef _VARIANT_NINA_B302_UBLOX_
|
||||
#define _VARIANT_NINA_B302_UBLOX_
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
// define USE_LFRC // Board uses RC for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif // __cplusplus
|
||||
// (XX) = TABLE INDEX
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (34)
|
||||
#define NUM_DIGITAL_PINS (34)
|
||||
#define NUM_ANALOG_INPUTS (6) // A6 is used for battery, A7 is analog reference
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED1 (3)
|
||||
#define PIN_LED2 (4)
|
||||
#define PIN_NEOPIXEL (8)
|
||||
|
||||
#define LED_BUILTIN PIN_LED1
|
||||
#define LED_CONN PIN_LED2
|
||||
|
||||
#define LED_RED PIN_LED1
|
||||
#define LED_BLUE PIN_LED2
|
||||
|
||||
#define LED_STATE_ON 1 // State when LED is litted
|
||||
|
||||
/*
|
||||
* Buttons
|
||||
*/
|
||||
#define PIN_BUTTON1 (7)
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A0 (14)
|
||||
#define PIN_A1 (15)
|
||||
#define PIN_A2 (16)
|
||||
#define PIN_A3 (17)
|
||||
#define PIN_A4 (18)
|
||||
#define PIN_A5 (19)
|
||||
#define PIN_A6 (20)
|
||||
#define PIN_A7 (21)
|
||||
|
||||
#define D0 (0)
|
||||
#define D1 (1)
|
||||
#define D2 (2)
|
||||
#define D3 (3)
|
||||
#define D4 (4)
|
||||
#define D5 (5)
|
||||
#define D6 (6)
|
||||
#define D7 (7)
|
||||
#define D8 (8)
|
||||
#define D9 (9)
|
||||
#define D10 (10)
|
||||
#define D11 (11)
|
||||
#define D12 (12)
|
||||
#define D13 (13)
|
||||
|
||||
static const uint8_t A0 = PIN_A0 ;
|
||||
static const uint8_t A1 = PIN_A1 ;
|
||||
static const uint8_t A2 = PIN_A2 ;
|
||||
static const uint8_t A3 = PIN_A3 ;
|
||||
static const uint8_t A4 = PIN_A4 ;
|
||||
static const uint8_t A5 = PIN_A5 ;
|
||||
static const uint8_t A6 = PIN_A6 ;
|
||||
static const uint8_t A7 = PIN_A7 ;
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
// Other pins
|
||||
#define PIN_AREF PIN_A7
|
||||
#define PIN_VBAT PIN_A6
|
||||
#define PIN_NFC1 (33)
|
||||
#define PIN_NFC2 (2)
|
||||
|
||||
static const uint8_t AREF = PIN_AREF;
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
#define PIN_SERIAL1_RX (1)
|
||||
#define PIN_SERIAL1_TX (0)
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_SPI_MISO (24) //24 original
|
||||
#define PIN_SPI_MOSI (25) //25 original
|
||||
#define PIN_SPI_SCK (26) //26 original
|
||||
|
||||
static const uint8_t SS = (13);
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI;
|
||||
static const uint8_t MISO = PIN_SPI_MISO;
|
||||
static const uint8_t SCK = PIN_SPI_SCK;
|
||||
|
||||
/*
|
||||
* Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (22)
|
||||
#define PIN_WIRE_SCL (23)
|
||||
|
||||
// QSPI Pins
|
||||
#define PIN_QSPI_SCK 27
|
||||
#define PIN_QSPI_CS 28
|
||||
#define PIN_QSPI_IO0 29
|
||||
#define PIN_QSPI_IO1 30
|
||||
#define PIN_QSPI_IO2 31
|
||||
#define PIN_QSPI_IO3 32
|
||||
|
||||
// On-board QSPI Flash
|
||||
#define EXTERNAL_FLASH_DEVICES GD25Q16C
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#endif //_VARIANT_NINA_B302_UBLOX_
|
||||
@@ -0,0 +1,649 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
# Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
# Copyright (c) 2017 Adafruit Industries. All right reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
menu.softdevice=Bootloader
|
||||
menu.debug=Debug
|
||||
|
||||
# ----------------------------------
|
||||
# Bluefruit Feather nRF52832
|
||||
# ----------------------------------
|
||||
feather52832.name=Adafruit Feather nRF52832
|
||||
feather52832.bootloader.tool=bootburn
|
||||
|
||||
# Upload
|
||||
feather52832.upload.tool=nrfutil
|
||||
feather52832.upload.protocol=nrfutil
|
||||
feather52832.upload.use_1200bps_touch=false
|
||||
feather52832.upload.wait_for_upload_port=false
|
||||
feather52832.upload.native_usb=false
|
||||
feather52832.upload.maximum_size=290816
|
||||
feather52832.upload.maximum_data_size=52224
|
||||
|
||||
# Build
|
||||
feather52832.build.mcu=cortex-m4
|
||||
feather52832.build.f_cpu=64000000
|
||||
feather52832.build.board=NRF52832_FEATHER
|
||||
feather52832.build.core=nRF5
|
||||
feather52832.build.variant=feather_nrf52832
|
||||
feather52840.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52840.build.usb_product="Feather nRF52832"
|
||||
feather52832.build.extra_flags=-DNRF52832_XXAA -DNRF52832_FEATHER -DNRF52
|
||||
feather52832.build.ldscript=nrf52832_s132_v6.ld
|
||||
|
||||
# SofDevice Menu
|
||||
feather52832.menu.softdevice.s132v6=0.3.2 SoftDevice s132 6.1.1
|
||||
feather52832.menu.softdevice.s132v6.build.sd_name=s132
|
||||
feather52832.menu.softdevice.s132v6.build.sd_version=6.1.1
|
||||
feather52832.menu.softdevice.s132v6.build.sd_fwid=0x00B7
|
||||
|
||||
# Debug Menu
|
||||
feather52832.menu.debug.l0=Level 0 (Release)
|
||||
feather52832.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
feather52832.menu.debug.l1=Level 1 (Error Message)
|
||||
feather52832.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
feather52832.menu.debug.l2=Level 2 (Full Debug)
|
||||
feather52832.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
feather52832.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
feather52832.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
feather52832.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Bluefruit Feather nRF52840 Express
|
||||
# ----------------------------------
|
||||
feather52840.name=Adafruit Feather nRF52840 Express
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
feather52840.vid.0=0x239A
|
||||
feather52840.pid.0=0x8029
|
||||
feather52840.vid.1=0x239A
|
||||
feather52840.pid.1=0x0029
|
||||
feather52840.vid.2=0x239A
|
||||
feather52840.pid.2=0x002A
|
||||
feather52840.vid.3=0x239A
|
||||
feather52840.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
feather52840.bootloader.tool=bootburn
|
||||
feather52840.upload.tool=nrfutil
|
||||
feather52840.upload.protocol=nrfutil
|
||||
feather52840.upload.use_1200bps_touch=true
|
||||
feather52840.upload.wait_for_upload_port=true
|
||||
feather52840.upload.maximum_size=815104
|
||||
feather52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
feather52840.build.mcu=cortex-m4
|
||||
feather52840.build.f_cpu=64000000
|
||||
feather52840.build.board=NRF52840_FEATHER
|
||||
feather52840.build.core=nRF5
|
||||
feather52840.build.variant=feather_nrf52840_express
|
||||
feather52840.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52840.build.usb_product="Feather nRF52840 Express"
|
||||
feather52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_FEATHER {build.flags.usb}
|
||||
feather52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
feather52840.build.vid=0x239A
|
||||
feather52840.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
feather52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
feather52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
feather52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
feather52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
feather52840.menu.debug.l0=Level 0 (Release)
|
||||
feather52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
feather52840.menu.debug.l1=Level 1 (Error Message)
|
||||
feather52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
feather52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
feather52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
feather52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
feather52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
feather52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
# ----------------------------------
|
||||
# Feather Bluefruit sense
|
||||
# ----------------------------------
|
||||
feather52840sense.name=Adafruit Feather Bluefruit Sense
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
feather52840sense.vid.0=0x239A
|
||||
feather52840sense.pid.0=0x8087
|
||||
feather52840sense.vid.1=0x239A
|
||||
feather52840sense.pid.1=0x0087
|
||||
feather52840sense.vid.2=0x239A
|
||||
feather52840sense.pid.2=0x0088
|
||||
feather52840sense.vid.3=0x239A
|
||||
feather52840sense.pid.3=0x8088
|
||||
|
||||
# Upload
|
||||
feather52840sense.bootloader.tool=bootburn
|
||||
feather52840sense.upload.tool=nrfutil
|
||||
feather52840sense.upload.protocol=nrfutil
|
||||
feather52840sense.upload.use_1200bps_touch=true
|
||||
feather52840sense.upload.wait_for_upload_port=true
|
||||
feather52840sense.upload.maximum_size=815104
|
||||
feather52840sense.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
feather52840sense.build.mcu=cortex-m4
|
||||
feather52840sense.build.f_cpu=64000000
|
||||
feather52840sense.build.board=NRF52840_FEATHER_SENSE
|
||||
feather52840sense.build.core=nRF5
|
||||
feather52840sense.build.variant=feather_nrf52840_sense
|
||||
feather52840sense.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52840sense.build.usb_product="Feather nRF52840 Sense"
|
||||
feather52840sense.build.extra_flags=-DNRF52840_XXAA -DNRF52840_FEATHER_SENSE {build.flags.usb}
|
||||
feather52840sense.build.ldscript=nrf52840_s140_v6.ld
|
||||
feather52840sense.build.vid=0x239A
|
||||
feather52840sense.build.pid=0x8087
|
||||
|
||||
# SofDevice Menu
|
||||
feather52840sense.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
feather52840sense.menu.softdevice.s140v6.build.sd_name=s140
|
||||
feather52840sense.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
feather52840sense.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
feather52840sense.menu.debug.l0=Level 0 (Release)
|
||||
feather52840sense.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
feather52840sense.menu.debug.l1=Level 1 (Error Message)
|
||||
feather52840sense.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
feather52840sense.menu.debug.l2=Level 2 (Full Debug)
|
||||
feather52840sense.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
feather52840sense.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
feather52840sense.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
feather52840sense.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
# ---------------------------------------------
|
||||
# Bluefruit ItsyBitsy nRF52840 Express
|
||||
# ---------------------------------------------
|
||||
itsybitsy52840.name=Adafruit ItsyBitsy nRF52840 Express
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
itsybitsy52840.vid.0=0x239A
|
||||
itsybitsy52840.pid.0=0x8051
|
||||
itsybitsy52840.vid.1=0x239A
|
||||
itsybitsy52840.pid.1=0x0051
|
||||
itsybitsy52840.vid.2=0x239A
|
||||
itsybitsy52840.pid.2=0x0052
|
||||
itsybitsy52840.vid.3=0x239A
|
||||
itsybitsy52840.pid.3=0x8052
|
||||
|
||||
# Upload
|
||||
itsybitsy52840.bootloader.tool=bootburn
|
||||
itsybitsy52840.upload.tool=nrfutil
|
||||
itsybitsy52840.upload.protocol=nrfutil
|
||||
itsybitsy52840.upload.use_1200bps_touch=true
|
||||
itsybitsy52840.upload.wait_for_upload_port=true
|
||||
itsybitsy52840.upload.maximum_size=815104
|
||||
itsybitsy52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
itsybitsy52840.build.mcu=cortex-m4
|
||||
itsybitsy52840.build.f_cpu=64000000
|
||||
itsybitsy52840.build.board=NRF52840_ITSYBITSY
|
||||
itsybitsy52840.build.core=nRF5
|
||||
itsybitsy52840.build.variant=itsybitsy_nrf52840_express
|
||||
itsybitsy52840.build.usb_manufacturer="Adafruit LLC"
|
||||
itsybitsy52840.build.usb_product="ItsyBitsy nRF52840 Express"
|
||||
itsybitsy52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_ITSYBITSY -DARDUINO_NRF52_ITSYBITSY {build.flags.usb}
|
||||
itsybitsy52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
itsybitsy52840.build.vid=0x239A
|
||||
itsybitsy52840.build.pid=0x8051
|
||||
|
||||
# SofDevice Menu
|
||||
itsybitsy52840.menu.softdevice.s140v6=0.2.11 SoftDevice s140 6.1.1
|
||||
itsybitsy52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
itsybitsy52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
itsybitsy52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
itsybitsy52840.menu.debug.l0=Level 0 (Release)
|
||||
itsybitsy52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
itsybitsy52840.menu.debug.l1=Level 1 (Error Message)
|
||||
itsybitsy52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
itsybitsy52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
itsybitsy52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
itsybitsy52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
itsybitsy52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
itsybitsy52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ---------------------------------------------
|
||||
# Bluefruit Circuit Playground nRF52840 Express
|
||||
# ---------------------------------------------
|
||||
cplaynrf52840.name=Adafruit Circuit Playground Bluefruit
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
cplaynrf52840.vid.0=0x239A
|
||||
cplaynrf52840.pid.0=0x8045
|
||||
cplaynrf52840.vid.1=0x239A
|
||||
cplaynrf52840.pid.1=0x0045
|
||||
cplaynrf52840.vid.2=0x239A
|
||||
cplaynrf52840.pid.2=0x0046
|
||||
cplaynrf52840.vid.3=0x239A
|
||||
cplaynrf52840.pid.3=0x8046
|
||||
|
||||
# Upload
|
||||
cplaynrf52840.bootloader.tool=bootburn
|
||||
cplaynrf52840.upload.tool=nrfutil
|
||||
cplaynrf52840.upload.protocol=nrfutil
|
||||
cplaynrf52840.upload.use_1200bps_touch=true
|
||||
cplaynrf52840.upload.wait_for_upload_port=true
|
||||
cplaynrf52840.upload.maximum_size=815104
|
||||
cplaynrf52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
cplaynrf52840.build.mcu=cortex-m4
|
||||
cplaynrf52840.build.f_cpu=64000000
|
||||
cplaynrf52840.build.board=NRF52840_CIRCUITPLAY
|
||||
cplaynrf52840.build.core=nRF5
|
||||
cplaynrf52840.build.variant=circuitplayground_nrf52840
|
||||
cplaynrf52840.build.usb_manufacturer="Adafruit LLC"
|
||||
cplaynrf52840.build.usb_product="Circuit Playground Bluefruit"
|
||||
cplaynrf52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_CIRCUITPLAY {build.flags.usb}
|
||||
cplaynrf52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
cplaynrf52840.build.vid=0x239A
|
||||
cplaynrf52840.build.pid=0x8045
|
||||
|
||||
# SofDevice Menu
|
||||
cplaynrf52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
cplaynrf52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
cplaynrf52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
cplaynrf52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
cplaynrf52840.menu.debug.l0=Level 0 (Release)
|
||||
cplaynrf52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
cplaynrf52840.menu.debug.l1=Level 1 (Error Message)
|
||||
cplaynrf52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
cplaynrf52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
cplaynrf52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
cplaynrf52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
cplaynrf52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
cplaynrf52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
# ---------------------------------------------
|
||||
# Clue nRF52840
|
||||
# ---------------------------------------------
|
||||
cluenrf52840.name=Adafruit CLUE
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
cluenrf52840.vid.0=0x239A
|
||||
cluenrf52840.pid.0=0x8072
|
||||
cluenrf52840.vid.1=0x239A
|
||||
cluenrf52840.pid.1=0x0072
|
||||
cluenrf52840.vid.2=0x239A
|
||||
cluenrf52840.pid.2=0x0071
|
||||
cluenrf52840.vid.3=0x239A
|
||||
cluenrf52840.pid.3=0x8071
|
||||
|
||||
# Upload
|
||||
cluenrf52840.bootloader.tool=bootburn
|
||||
cluenrf52840.upload.tool=nrfutil
|
||||
cluenrf52840.upload.protocol=nrfutil
|
||||
cluenrf52840.upload.use_1200bps_touch=true
|
||||
cluenrf52840.upload.wait_for_upload_port=true
|
||||
cluenrf52840.upload.maximum_size=815104
|
||||
cluenrf52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
cluenrf52840.build.mcu=cortex-m4
|
||||
cluenrf52840.build.f_cpu=64000000
|
||||
cluenrf52840.build.board=NRF52840_CLUE
|
||||
cluenrf52840.build.core=nRF5
|
||||
cluenrf52840.build.variant=clue_nrf52840
|
||||
cluenrf52840.build.usb_manufacturer="Adafruit LLC"
|
||||
cluenrf52840.build.usb_product="CLUE"
|
||||
cluenrf52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_CLUE {build.flags.usb}
|
||||
cluenrf52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
cluenrf52840.build.vid=0x239A
|
||||
cluenrf52840.build.pid=0x8071
|
||||
|
||||
# SofDevice Menu
|
||||
cluenrf52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
cluenrf52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
cluenrf52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
cluenrf52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
cluenrf52840.menu.debug.l0=Level 0 (Release)
|
||||
cluenrf52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
cluenrf52840.menu.debug.l1=Level 1 (Error Message)
|
||||
cluenrf52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
cluenrf52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
cluenrf52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
cluenrf52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
cluenrf52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
cluenrf52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Bluefruit Metro nRF52840 Express
|
||||
# ----------------------------------
|
||||
metro52840.name=Adafruit Bluefruit Metro nRF52840 Express
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
metro52840.vid.0=0x239A
|
||||
metro52840.pid.0=0x803F
|
||||
metro52840.vid.1=0x239A
|
||||
metro52840.pid.1=0x003F
|
||||
metro52840.vid.2=0x239A
|
||||
metro52840.pid.2=0x0040
|
||||
metro52840.vid.3=0x239A
|
||||
metro52840.pid.3=0x8040
|
||||
|
||||
# Upload
|
||||
metro52840.bootloader.tool=bootburn
|
||||
metro52840.upload.tool=nrfutil
|
||||
metro52840.upload.protocol=nrfutil
|
||||
metro52840.upload.use_1200bps_touch=true
|
||||
metro52840.upload.wait_for_upload_port=true
|
||||
metro52840.upload.maximum_size=815104
|
||||
metro52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
metro52840.build.mcu=cortex-m4
|
||||
metro52840.build.f_cpu=64000000
|
||||
metro52840.build.board=NRF52840_METRO
|
||||
metro52840.build.core=nRF5
|
||||
metro52840.build.variant=metro_nrf52840_express
|
||||
metro52840.build.usb_manufacturer="Adafruit LLC"
|
||||
metro52840.build.usb_product="Metro nRF52840 Express"
|
||||
metro52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_METRO {build.flags.usb}
|
||||
metro52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
metro52840.build.vid=0x239A
|
||||
metro52840.build.pid=0x803F
|
||||
|
||||
# SofDevice Menu
|
||||
metro52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
metro52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
metro52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
metro52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
metro52840.menu.debug.l0=Level 0 (Release)
|
||||
metro52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
metro52840.menu.debug.l1=Level 1 (Error Message)
|
||||
metro52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
metro52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
metro52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
metro52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
metro52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
metro52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
|
||||
|
||||
# -------------------------------------------------------
|
||||
#
|
||||
# Boards that aren't made by Adafruit
|
||||
#
|
||||
# -------------------------------------------------------
|
||||
|
||||
|
||||
# ----------------------------------
|
||||
# Nordic nRF52840DK (PCA10056)
|
||||
# ----------------------------------
|
||||
pca10056.name=Nordic nRF52840DK (PCA10056)
|
||||
pca10056.bootloader.tool=bootburn
|
||||
|
||||
# Upload
|
||||
pca10056.upload.tool=nrfutil
|
||||
pca10056.upload.protocol=nrfutil
|
||||
pca10056.upload.use_1200bps_touch=true
|
||||
pca10056.upload.wait_for_upload_port=true
|
||||
pca10056.upload.maximum_size=815104
|
||||
pca10056.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
pca10056.build.mcu=cortex-m4
|
||||
pca10056.build.f_cpu=64000000
|
||||
pca10056.build.board=NRF52840_PCA10056
|
||||
pca10056.build.core=nRF5
|
||||
pca10056.build.variant=pca10056
|
||||
pca10056.build.usb_manufacturer="Nordic"
|
||||
pca10056.build.usb_product="nRF52840 DK"
|
||||
pca10056.build.extra_flags=-DNRF52840_XXAA -DNRF52840_PCA10056 {build.flags.usb}
|
||||
pca10056.build.ldscript=nrf52840_s140_v6.ld
|
||||
pca10056.build.vid=0x239A
|
||||
pca10056.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
pca10056.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
pca10056.menu.softdevice.s140v6.build.sd_name=s140
|
||||
pca10056.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
pca10056.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
pca10056.menu.debug.l0=Level 0 (Release)
|
||||
pca10056.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
pca10056.menu.debug.l1=Level 1 (Error Message)
|
||||
pca10056.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
pca10056.menu.debug.l2=Level 2 (Full Debug)
|
||||
pca10056.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
pca10056.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
pca10056.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
pca10056.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Particle Xenon
|
||||
# ----------------------------------
|
||||
particle_xenon.name=Particle Xenon
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
particle_xenon.vid.0=0x239A
|
||||
particle_xenon.pid.0=0x8029
|
||||
particle_xenon.vid.1=0x239A
|
||||
particle_xenon.pid.1=0x0029
|
||||
particle_xenon.vid.2=0x239A
|
||||
particle_xenon.pid.2=0x002A
|
||||
particle_xenon.vid.3=0x239A
|
||||
particle_xenon.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
particle_xenon.bootloader.tool=bootburn
|
||||
particle_xenon.upload.tool=nrfutil
|
||||
particle_xenon.upload.protocol=nrfutil
|
||||
particle_xenon.upload.use_1200bps_touch=true
|
||||
particle_xenon.upload.wait_for_upload_port=true
|
||||
particle_xenon.upload.maximum_size=815104
|
||||
particle_xenon.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
particle_xenon.build.mcu=cortex-m4
|
||||
particle_xenon.build.f_cpu=64000000
|
||||
particle_xenon.build.board=PARTICLE_XENON
|
||||
particle_xenon.build.core=nRF5
|
||||
particle_xenon.build.variant=particle_xenon
|
||||
particle_xenon.build.usb_manufacturer="Particle Industries"
|
||||
particle_xenon.build.usb_product="Particle Xenon"
|
||||
particle_xenon.build.extra_flags=-DNRF52840_XXAA -DPARTICLE_XENON {build.flags.usb}
|
||||
particle_xenon.build.ldscript=nrf52840_s140_v6.ld
|
||||
particle_xenon.build.vid=0x239A
|
||||
particle_xenon.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
particle_xenon.menu.softdevice.s140v6=0.2.11 SoftDevice s140 6.1.1
|
||||
particle_xenon.menu.softdevice.s140v6.build.sd_name=s140
|
||||
particle_xenon.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
particle_xenon.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
particle_xenon.menu.debug.l0=Level 0 (Release)
|
||||
particle_xenon.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
particle_xenon.menu.debug.l1=Level 1 (Error Message)
|
||||
particle_xenon.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
particle_xenon.menu.debug.l2=Level 2 (Full Debug)
|
||||
particle_xenon.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
particle_xenon.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
particle_xenon.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
particle_xenon.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Raytac MDBT50Q - RX
|
||||
# ----------------------------------
|
||||
mdbt50qrx.name=Raytac MDBT50Q-RX Dongle
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
mdbt50qrx.vid.0=0x239A
|
||||
mdbt50qrx.pid.0=0x8029
|
||||
mdbt50qrx.vid.1=0x239A
|
||||
mdbt50qrx.pid.1=0x0029
|
||||
mdbt50qrx.vid.2=0x239A
|
||||
mdbt50qrx.pid.2=0x002A
|
||||
mdbt50qrx.vid.3=0x239A
|
||||
mdbt50qrx.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
mdbt50qrx.bootloader.tool=bootburn
|
||||
mdbt50qrx.upload.tool=nrfutil
|
||||
mdbt50qrx.upload.protocol=nrfutil
|
||||
mdbt50qrx.upload.use_1200bps_touch=true
|
||||
mdbt50qrx.upload.wait_for_upload_port=true
|
||||
mdbt50qrx.upload.maximum_size=815104
|
||||
mdbt50qrx.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
mdbt50qrx.build.mcu=cortex-m4
|
||||
mdbt50qrx.build.f_cpu=64000000
|
||||
mdbt50qrx.build.board=MDBT50Q_RX
|
||||
mdbt50qrx.build.core=nRF5
|
||||
mdbt50qrx.build.variant=raytac_mdbt50q_rx
|
||||
mdbt50qrx.build.usb_manufacturer="Raytac Corporation"
|
||||
mdbt50qrx.build.usb_product="Raytac MDBT50Q - RX"
|
||||
mdbt50qrx.build.extra_flags=-DNRF52840_XXAA -DMDBT50Q_RX {build.flags.usb}
|
||||
mdbt50qrx.build.ldscript=nrf52840_s140_v6.ld
|
||||
mdbt50qrx.build.vid=0x239A
|
||||
mdbt50qrx.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
mdbt50qrx.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
mdbt50qrx.menu.softdevice.s140v6.build.sd_name=s140
|
||||
mdbt50qrx.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
mdbt50qrx.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
mdbt50qrx.menu.debug.l0=Level 0 (Release)
|
||||
mdbt50qrx.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
mdbt50qrx.menu.debug.l1=Level 1 (Error Message)
|
||||
mdbt50qrx.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
mdbt50qrx.menu.debug.l2=Level 2 (Full Debug)
|
||||
mdbt50qrx.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
mdbt50qrx.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
mdbt50qrx.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
mdbt50qrx.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# NINA B302
|
||||
# ----------------------------------
|
||||
ninab302.name=NINA B302 ublox
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
ninab302.vid.0=0x239A
|
||||
ninab302.pid.0=0x8029
|
||||
ninab302.vid.1=0x239A
|
||||
ninab302.pid.1=0x0029
|
||||
ninab302.vid.2=0x7239A
|
||||
ninab302.pid.2=0x002A
|
||||
ninab302.vid.3=0x239A
|
||||
ninab302.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
ninab302.bootloader.tool=bootburn
|
||||
ninab302.upload.tool=nrfutil
|
||||
ninab302.upload.protocol=nrfutil
|
||||
ninab302.upload.use_1200bps_touch=true
|
||||
ninab302.upload.wait_for_upload_port=true
|
||||
ninab302.upload.maximum_size=815104
|
||||
ninab302.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
ninab302.build.mcu=cortex-m4
|
||||
ninab302.build.f_cpu=64000000
|
||||
ninab302.build.board=NINA_B302_ublox
|
||||
ninab302.build.core=nRF5
|
||||
ninab302.build.variant=NINA_B302_ublox
|
||||
ninab302.build.usb_manufacturer="Nordic"
|
||||
ninab302.build.usb_product="NINA B302 ublox"
|
||||
ninab302.build.extra_flags=-DNRF52840_XXAA -DNINA_B302_ublox {build.flags.usb}
|
||||
ninab302.build.ldscript=nrf52840_s140_v6.ld
|
||||
ninab302.build.vid=0x239A
|
||||
ninab302.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
ninab302.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
ninab302.menu.softdevice.s140v6.build.sd_name=s140
|
||||
ninab302.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
ninab302.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
ninab302.menu.debug.l0=Level 0 (Release)
|
||||
ninab302.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
ninab302.menu.debug.l1=Level 1 (Error Message)
|
||||
ninab302.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
ninab302.menu.debug.l2=Level 2 (Full Debug)
|
||||
ninab302.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
ninab302.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
ninab302.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
ninab302.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# NINA B112
|
||||
# ----------------------------------
|
||||
ninab112.name=NINA B112 ublox
|
||||
ninab112.bootloader.tool=bootburn
|
||||
|
||||
# Upload
|
||||
ninab112.upload.tool=nrfutil
|
||||
ninab112.upload.protocol=nrfutil
|
||||
ninab112.upload.use_1200bps_touch=false
|
||||
ninab112.upload.wait_for_upload_port=false
|
||||
ninab112.upload.native_usb=false
|
||||
ninab112.upload.maximum_size=290816
|
||||
ninab112.upload.maximum_data_size=52224
|
||||
|
||||
# Build
|
||||
ninab112.build.mcu=cortex-m4
|
||||
ninab112.build.f_cpu=64000000
|
||||
ninab112.build.board=NINA_B112_ublox
|
||||
ninab112.build.core=nRF5
|
||||
ninab112.build.variant=NINA_B112_ublox
|
||||
feather52840.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52840.build.usb_product="Feather nRF52832"
|
||||
ninab112.build.extra_flags=-DNRF52832_XXAA -DNINA_B112_ublox -DNRF52
|
||||
ninab112.build.ldscript=nrf52832_s132_v6.ld
|
||||
|
||||
# SofDevice Menu
|
||||
ninab112.menu.softdevice.s132v6=0.3.2 SoftDevice s132 6.1.1
|
||||
ninab112.menu.softdevice.s132v6.build.sd_name=s132
|
||||
ninab112.menu.softdevice.s132v6.build.sd_version=6.1.1
|
||||
ninab112.menu.softdevice.s132v6.build.sd_fwid=0x00B7
|
||||
|
||||
# Debug Menu
|
||||
ninab112.menu.debug.l0=Level 0 (Release)
|
||||
ninab112.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
ninab112.menu.debug.l1=Level 1 (Error Message)
|
||||
ninab112.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
ninab112.menu.debug.l2=Level 2 (Full Debug)
|
||||
ninab112.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
ninab112.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
ninab112.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
ninab112.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
@@ -0,0 +1,92 @@
|
||||
/*
|
||||
* Udp.cpp: Library to send/receive UDP packets.
|
||||
*
|
||||
* NOTE: UDP is fast, but has some important limitations (thanks to Warren Gray for mentioning these)
|
||||
* 1) UDP does not guarantee the order in which assembled UDP packets are received. This
|
||||
* might not happen often in practice, but in larger network topologies, a UDP
|
||||
* packet can be received out of sequence.
|
||||
* 2) UDP does not guard against lost packets - so packets *can* disappear without the sender being
|
||||
* aware of it. Again, this may not be a concern in practice on small local networks.
|
||||
* For more information, see http://www.cafeaulait.org/course/week12/35.html
|
||||
*
|
||||
* MIT License:
|
||||
* Copyright (c) 2008 Bjoern Hartmann
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* bjoern@cs.stanford.edu 12/30/2008
|
||||
*/
|
||||
|
||||
#ifndef udp_h
|
||||
#define udp_h
|
||||
|
||||
#include <Stream.h>
|
||||
#include <IPAddress.h>
|
||||
|
||||
class UDP : public Stream {
|
||||
|
||||
public:
|
||||
virtual uint8_t begin(uint16_t) =0; // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
|
||||
|
||||
// KH, add virtual function to support Multicast, necessary for many services (MDNS, etc.)
|
||||
virtual uint8_t beginMulticast(IPAddress, uint16_t) { return 0; } // initialize, start listening on specified multicast IP address and port. Returns 1 if successful, 0 on failure
|
||||
|
||||
virtual void stop() =0; // Finish with the UDP socket
|
||||
|
||||
// Sending UDP packets
|
||||
|
||||
// Start building up a packet to send to the remote host specific in ip and port
|
||||
// Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
|
||||
virtual int beginPacket(IPAddress ip, uint16_t port) =0;
|
||||
// Start building up a packet to send to the remote host specific in host and port
|
||||
// Returns 1 if successful, 0 if there was a problem resolving the hostname or port
|
||||
virtual int beginPacket(const char *host, uint16_t port) =0;
|
||||
// Finish off this packet and send it
|
||||
// Returns 1 if the packet was sent successfully, 0 if there was an error
|
||||
virtual int endPacket() =0;
|
||||
// Write a single byte into the packet
|
||||
virtual size_t write(uint8_t) =0;
|
||||
// Write size bytes from buffer into the packet
|
||||
virtual size_t write(const uint8_t *buffer, size_t size) =0;
|
||||
|
||||
// Start processing the next available incoming packet
|
||||
// Returns the size of the packet in bytes, or 0 if no packets are available
|
||||
virtual int parsePacket() =0;
|
||||
// Number of bytes remaining in the current packet
|
||||
virtual int available() =0;
|
||||
// Read a single byte from the current packet
|
||||
virtual int read() =0;
|
||||
// Read up to len bytes from the current packet and place them into buffer
|
||||
// Returns the number of bytes read, or 0 if none are available
|
||||
virtual int read(unsigned char* buffer, size_t len) =0;
|
||||
// Read up to len characters from the current packet and place them into buffer
|
||||
// Returns the number of characters read, or 0 if none are available
|
||||
virtual int read(char* buffer, size_t len) =0;
|
||||
// Return the next byte from the current packet without moving on to the next byte
|
||||
virtual int peek() =0;
|
||||
virtual void flush() =0; // Finish reading the current packet
|
||||
|
||||
// Return the IP address of the host who sent the current incoming packet
|
||||
virtual IPAddress remoteIP() =0;
|
||||
// Return the port of the host who sent the current incoming packet
|
||||
virtual uint16_t remotePort() =0;
|
||||
protected:
|
||||
uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,164 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
# Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
# Copyright (c) 2017 Adafruit Industries. All rights reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
name=Adafruit nRF52 Boards
|
||||
version=0.20.5
|
||||
|
||||
# Compile variables
|
||||
# -----------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall
|
||||
compiler.warning_flags.all=-Wall -Wextra -Wno-unused-parameter -Wno-missing-field-initializers -Wno-pointer-arith
|
||||
|
||||
compiler.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.warning_flags} {build.float_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
|
||||
# KH, Error here to use gcc, mjust use g++
|
||||
#compiler.c.elf.cmd=arm-none-eabi-gcc
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags=-Ofast -Wl,--gc-sections -save-temps
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.warning_flags} {build.float_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
compiler.objcopy.cmd=arm-none-eabi-objcopy
|
||||
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
|
||||
compiler.elf2bin.flags=-O binary
|
||||
compiler.elf2bin.cmd=arm-none-eabi-objcopy
|
||||
compiler.elf2hex.flags=-O ihex
|
||||
compiler.elf2hex.cmd=arm-none-eabi-objcopy
|
||||
compiler.ldflags=-mcpu={build.mcu} -mthumb {build.float_flags} -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align --specs=nano.specs --specs=nosys.specs
|
||||
compiler.size.cmd=arm-none-eabi-size
|
||||
|
||||
# this can be overriden in boards.txt
|
||||
build.float_flags=-mfloat-abi=hard -mfpu=fpv4-sp-d16 -u _printf_float
|
||||
build.debug_flags=-DCFG_DEBUG=0
|
||||
build.logger_flags=-DCFG_LOGGER=1
|
||||
build.sysview_flags=-DCFG_SYSVIEW=0
|
||||
|
||||
# common compiler for nrf
|
||||
rtos.path={build.core.path}/freertos
|
||||
nordic.path={build.core.path}/nordic
|
||||
|
||||
# build.logger_flags and build.sysview_flags and intentionally empty,
|
||||
# to allow modification via a user's own boards.local.txt or platform.local.txt files.
|
||||
build.flags.nrf= -DSOFTDEVICE_PRESENT -DARDUINO_NRF52_ADAFRUIT -DNRF52_SERIES -DLFS_NAME_MAX=64 -Ofast {build.debug_flags} {build.logger_flags} {build.sysview_flags} "-I{build.core.path}/cmsis/Core/Include" "-I{nordic.path}" "-I{nordic.path}/nrfx" "-I{nordic.path}/nrfx/hal" "-I{nordic.path}/nrfx/mdk" "-I{nordic.path}/nrfx/soc" "-I{nordic.path}/nrfx/drivers/include" "-I{nordic.path}/nrfx/drivers/src" "-I{nordic.path}/softdevice/{build.sd_name}_nrf52_{build.sd_version}_API/include" "-I{rtos.path}/Source/include" "-I{rtos.path}/config" "-I{rtos.path}/portable/GCC/nrf52" "-I{rtos.path}/portable/CMSIS/nrf52" "-I{build.core.path}/sysview/SEGGER" "-I{build.core.path}/sysview/Config" "-I{build.core.path}/TinyUSB" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src"
|
||||
|
||||
# usb flags
|
||||
build.flags.usb= -DUSBCON -DUSE_TINYUSB -DUSB_VID={build.vid} -DUSB_PID={build.pid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
|
||||
|
||||
# These can be overridden in platform.local.txt
|
||||
compiler.c.extra_flags=
|
||||
compiler.c.elf.extra_flags=
|
||||
compiler.cpp.extra_flags=
|
||||
compiler.S.extra_flags=
|
||||
compiler.ar.extra_flags=
|
||||
compiler.elf2bin.extra_flags=
|
||||
compiler.elf2hex.extra_flags=
|
||||
|
||||
|
||||
# Compile patterns
|
||||
# ----------------
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.c.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.c.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile c++ files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.cpp.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.cpp.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile S files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Create archives
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Combine gc-sections, archives, and objects
|
||||
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-L{build.core.path}/linker" "-T{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} -Wl,--start-group -lm "{build.path}/{archive_file}" -Wl,--end-group
|
||||
|
||||
## Create output (bin file)
|
||||
#recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2bin.cmd}" {compiler.elf2bin.flags} {compiler.elf2bin.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
|
||||
|
||||
## Create output (hex file)
|
||||
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
## Create dfu package zip file
|
||||
recipe.objcopy.zip.pattern="{tools.nrfutil.cmd}" dfu genpkg --dev-type 0x0052 --sd-req {build.sd_fwid} --application "{build.path}/{build.project_name}.hex" "{build.path}/{build.project_name}.zip"
|
||||
|
||||
## Create uf2 file
|
||||
#recipe.objcopy.uf2.pattern=python "{runtime.platform.path}/tools/uf2conv/uf2conv.py" -f 0xADA52840 -c -o "{build.path}/{build.project_name}.uf2" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
## Save bin
|
||||
recipe.output.tmp_file_bin={build.project_name}.bin
|
||||
recipe.output.save_file_bin={build.project_name}.save.bin
|
||||
|
||||
## Save hex
|
||||
recipe.output.tmp_file_hex={build.project_name}.hex
|
||||
recipe.output.save_file_hexu={build.project_name}.save.hex
|
||||
|
||||
## Compute size
|
||||
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
|
||||
recipe.size.regex=^(?:\.text|\.data|)\s+([0-9]+).*
|
||||
recipe.size.regex.data=^(?:\.data|\.bss)\s+([0-9]+).*
|
||||
|
||||
## Export Compiled Binary
|
||||
recipe.output.tmp_file={build.project_name}.hex
|
||||
recipe.output.save_file={build.project_name}.{build.variant}.hex
|
||||
|
||||
#***************************************************
|
||||
# adafruit-nrfutil for uploading
|
||||
# https://github.com/adafruit/Adafruit_nRF52_nrfutil
|
||||
# pre-built binaries are provided for macos and windows
|
||||
#***************************************************
|
||||
tools.nrfutil.cmd=adafruit-nrfutil
|
||||
tools.nrfutil.cmd.windows={runtime.platform.path}/tools/adafruit-nrfutil/win32/adafruit-nrfutil.exe
|
||||
tools.nrfutil.cmd.macosx={runtime.platform.path}/tools/adafruit-nrfutil/macos/adafruit-nrfutil
|
||||
|
||||
tools.nrfutil.upload.params.verbose=--verbose
|
||||
tools.nrfutil.upload.params.quiet=
|
||||
tools.nrfutil.upload.pattern="{cmd}" {upload.verbose} dfu serial -pkg "{build.path}/{build.project_name}.zip" -p {serial.port} -b 115200 --singlebank
|
||||
|
||||
#***************************************************
|
||||
# Burning bootloader with either jlink or nrfutil
|
||||
#***************************************************
|
||||
|
||||
# Bootloader version
|
||||
tools.bootburn.bootloader.file={runtime.platform.path}/bootloader/{build.variant}/{build.variant}_bootloader-0.3.2_{build.sd_name}_{build.sd_version}
|
||||
|
||||
tools.bootburn.bootloader.params.verbose=
|
||||
tools.bootburn.bootloader.params.quiet=
|
||||
tools.bootburn.bootloader.pattern={program.burn_pattern}
|
||||
|
||||
# erase flash page while programming
|
||||
tools.bootburn.erase.params.verbose=
|
||||
tools.bootburn.erase.params.quiet=
|
||||
tools.bootburn.erase.pattern=
|
||||
|
||||
+17
@@ -0,0 +1,17 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// API compatibility
|
||||
#include "variant.h"
|
||||
@@ -0,0 +1,62 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip).
|
||||
// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
|
||||
|
||||
#include "variant.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
#include "nrf.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
0,
|
||||
1,
|
||||
2,
|
||||
3,
|
||||
4,
|
||||
5,
|
||||
6,
|
||||
7,
|
||||
8,
|
||||
9,
|
||||
10,
|
||||
11,
|
||||
12,
|
||||
13,
|
||||
14,
|
||||
15,
|
||||
16,
|
||||
17,
|
||||
18,
|
||||
19,
|
||||
20,
|
||||
21,
|
||||
22,
|
||||
23,
|
||||
24,
|
||||
25,
|
||||
26,
|
||||
27,
|
||||
28,
|
||||
29,
|
||||
30,
|
||||
31
|
||||
};
|
||||
|
||||
@@ -0,0 +1,173 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _VARIANT_NINA_B112_UBLOX_
|
||||
#define _VARIANT_NINA_B112_UBLOX_
|
||||
|
||||
#define NRF_CLOCK_LFCLKSRC {.source = NRF_CLOCK_LF_SRC_XTAL, \
|
||||
.rc_ctiv = 0, \
|
||||
.rc_temp_ctiv = 0, \
|
||||
.xtal_accuracy = NRF_CLOCK_LF_XTAL_ACCURACY_20_PPM}
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
// define USE_LFRC // Board uses RC for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif // __cplusplus
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (32u)
|
||||
#define NUM_DIGITAL_PINS (32u)
|
||||
#define NUM_ANALOG_INPUTS (6u)
|
||||
#define NUM_ANALOG_OUTPUTS (0u)
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED LED1
|
||||
#define LED_BUILTIN PIN_LED
|
||||
|
||||
//LEDs onboard
|
||||
#define LED1 (8) // Red
|
||||
#define LED2 (16) // Green/SW1
|
||||
#define LED3 (18) // Blue
|
||||
|
||||
#define LED_STATE_ON 1 // State when LED is litted
|
||||
|
||||
//Switch
|
||||
|
||||
#define SW1 (16)
|
||||
#define SW2 (30)
|
||||
|
||||
// NFC
|
||||
#define PIN_NFC_1 (9) // P0.9
|
||||
#define PIN_NFC_2 (10) // P0.10
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A0 (3) // P0.03
|
||||
#define PIN_A1 (2) // P0.02
|
||||
#define PIN_A2 (4) // P0.04
|
||||
#define PIN_A3 (30) // P0.30
|
||||
#define PIN_A4 (29) // P0.29
|
||||
#define PIN_A5 (28) // P0.28
|
||||
|
||||
static const uint8_t A0 = PIN_A0 ;
|
||||
static const uint8_t A1 = PIN_A1 ;
|
||||
static const uint8_t A2 = PIN_A2 ;
|
||||
static const uint8_t A3 = PIN_A3 ;
|
||||
static const uint8_t A4 = PIN_A4 ;
|
||||
static const uint8_t A5 = PIN_A5 ;
|
||||
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
#define PIN_D0 (5) // P0.05
|
||||
#define PIN_D1 (6) // P0.06
|
||||
#define PIN_D2 (7) // P0.07
|
||||
#define PIN_D3 (31) // P0.31
|
||||
#define PIN_D4 (18) // P0.18
|
||||
#define PIN_D6 (9) // P0.09
|
||||
#define PIN_D7 (10) // P0.10
|
||||
#define PIN_D9 (8) // P0.8
|
||||
#define PIN_D10 (11) // P0.11
|
||||
#define PIN_D11 (13) // P0.13
|
||||
#define PIN_D12 (12) // P0.12
|
||||
#define PIN_D13 (14) // P0.14
|
||||
#define PIN_D14 (2) // P0.02
|
||||
#define PIN_D15 (3) // P0.03
|
||||
|
||||
static const uint8_t D0 = PIN_D0 ;
|
||||
static const uint8_t D1 = PIN_D1 ;
|
||||
static const uint8_t D2 = PIN_D2 ;
|
||||
static const uint8_t D3 = PIN_D3 ;
|
||||
static const uint8_t D4 = PIN_D4 ;
|
||||
static const uint8_t D6 = PIN_D6 ;
|
||||
static const uint8_t D7 = PIN_D7 ;
|
||||
static const uint8_t D9 = PIN_D9 ;
|
||||
static const uint8_t D10 = PIN_D10 ;
|
||||
static const uint8_t D11 = PIN_D11 ;
|
||||
static const uint8_t D12 = PIN_D12 ;
|
||||
static const uint8_t D13 = PIN_D13 ;
|
||||
static const uint8_t D14 = PIN_D14 ;
|
||||
static const uint8_t D15 = PIN_D15 ;
|
||||
|
||||
// Other pins
|
||||
//static const uint8_t AREF = PIN_AREF;
|
||||
|
||||
//#define PIN_AREF (24)
|
||||
//#define PIN_VBAT PIN_A7
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
//#define PIN_SERIAL_RX (8) //used for original Adafruit Bootloader
|
||||
//#define PIN_SERIAL_TX (6) //used for original Adafruit Bootloader
|
||||
|
||||
#define PIN_SERIAL_RX (5) // P0.05
|
||||
#define PIN_SERIAL_TX (6) // P0.06
|
||||
#define PIN_SERIAL_CTS (7) // P0.07
|
||||
#define PIN_SERIAL_RTS (31) // P0.31
|
||||
#define PIN_SERIAL_DTR (28) // P0.28
|
||||
#define PIN_SERIAL_DSR (29) // P0.29
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_SPI_MISO (12) // P0.12
|
||||
#define PIN_SPI_MOSI (13) // P0.13
|
||||
#define PIN_SPI_SCK (14) // P0.14
|
||||
|
||||
static const uint8_t SS = 11 ; // P0.11
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI ;
|
||||
static const uint8_t MISO = PIN_SPI_MISO ;
|
||||
static const uint8_t SCK = PIN_SPI_SCK ;
|
||||
|
||||
/*
|
||||
* Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (2) // P0.02
|
||||
#define PIN_WIRE_SCL (3) // P0.03
|
||||
|
||||
static const uint8_t SDA = PIN_WIRE_SDA;
|
||||
static const uint8_t SCL = PIN_WIRE_SCL;
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
|
||||
#endif //_VARIANT_NINA_B112_UBLOX_
|
||||
+17
@@ -0,0 +1,17 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// API compatibility
|
||||
#include "variant.h"
|
||||
@@ -0,0 +1,109 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip).
|
||||
// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
|
||||
|
||||
#include "variant.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
#include "nrf.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] =
|
||||
{
|
||||
// D0 .. D13
|
||||
29, // D0 is P0.29 (UART TX)
|
||||
45, // D1 is P1.13 (UART RX
|
||||
44, // D2 is P1.12 (NFC2)
|
||||
31, // D3 is P0.31 (LED1)
|
||||
13, // D4 is P0.13 (LED2)
|
||||
11, // D5 is P0.11
|
||||
9, // D6 is P0.09
|
||||
10, // D7 is P0.10 (Button)
|
||||
41, // D8 is P1.09 (NeoPixel)
|
||||
12, // D9 is P0.12
|
||||
14, // D10 is P0.14
|
||||
15, // D11 is P0.15
|
||||
32, // D12 is P1.00
|
||||
7, // D13 is P0.07
|
||||
|
||||
// D14 .. D21 (aka A0 .. A7)
|
||||
4, // D14 is P0.04 (A0)
|
||||
30, // D15 is P0.30 (A1)
|
||||
5, // D16 is P0.05 (A2)
|
||||
2, // D17 is P0.02 (A3)
|
||||
28, // D18 is P0.28 (A4)
|
||||
3, // D19 is P0.03 (A5)
|
||||
29, // D20 is P0.29 (A6, Battery) ????
|
||||
31, // D21 is P0.31 (A7, ARef) ????
|
||||
|
||||
// D22 .. D23 (aka I2C pins)
|
||||
16, // D22 is P0.16 (SDA)
|
||||
24, // D23 is P0.24 (SCL)
|
||||
|
||||
// D24 .. D26 (aka SPI pins)
|
||||
32, // D24 is P1.00 (SPI MISO)
|
||||
15, // D25 is P0.15 (SPI MOSI)
|
||||
7, // D26 is P0.07 (SPI SCK )
|
||||
|
||||
// QSPI pins (not exposed via any header / test point)
|
||||
19, // D27 is P0.19 (QSPI CLK)
|
||||
17, // D28 is P0.17 (QSPI CS)
|
||||
20, // D29 is P0.20 (QSPI Data 0)
|
||||
21, // D30 is P0.21 (QSPI Data 1)
|
||||
22, // D31 is P0.22 (QSPI Data 2)
|
||||
23, // D32 is P0.23 (QSPI Data 3)
|
||||
|
||||
// The remaining NFC pin
|
||||
9, // D33 is P0.09 (NFC1, exposed only via test point on bottom of board)
|
||||
|
||||
// Thus, there are 34 defined pins
|
||||
|
||||
// The remaining pins are not usable:
|
||||
//
|
||||
//
|
||||
// The following pins were never listed as they were considered unusable
|
||||
// 0, // P0.00 is XL1 (attached to 32.768kHz crystal)
|
||||
// 1, // P0.01 is XL2 (attached to 32.768kHz crystal)
|
||||
// 18, // P0.18 is RESET (attached to switch)
|
||||
// 32, // P1.00 is SWO (attached to debug header)
|
||||
//
|
||||
// The remaining pins are not connected (per schematic)
|
||||
// 33, // P1.01 is not connected per schematic
|
||||
// 35, // P1.03 is not connected per schematic
|
||||
// 36, // P1.04 is not connected per schematic
|
||||
// 37, // P1.05 is not connected per schematic
|
||||
// 38, // P1.06 is not connected per schematic
|
||||
// 39, // P1.07 is not connected per schematic
|
||||
// 43, // P1.11 is not connected per schematic
|
||||
// 44, // P1.12 is not connected per schematic
|
||||
// 45, // P1.13 is not connected per schematic
|
||||
// 46, // P1.14 is not connected per schematic
|
||||
};
|
||||
|
||||
void initVariant()
|
||||
{
|
||||
// LED1 & LED2
|
||||
pinMode(PIN_LED1, OUTPUT);
|
||||
ledOff(PIN_LED1);
|
||||
|
||||
pinMode(PIN_LED2, OUTPUT);
|
||||
ledOff(PIN_LED2);
|
||||
}
|
||||
|
||||
@@ -0,0 +1,159 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip).
|
||||
// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
|
||||
|
||||
#ifndef _VARIANT_NINA_B302_UBLOX_
|
||||
#define _VARIANT_NINA_B302_UBLOX_
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
// define USE_LFRC // Board uses RC for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif // __cplusplus
|
||||
// (XX) = TABLE INDEX
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (34)
|
||||
#define NUM_DIGITAL_PINS (34)
|
||||
#define NUM_ANALOG_INPUTS (6) // A6 is used for battery, A7 is analog reference
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED1 (3)
|
||||
#define PIN_LED2 (4)
|
||||
#define PIN_NEOPIXEL (8)
|
||||
|
||||
#define LED_BUILTIN PIN_LED1
|
||||
#define LED_CONN PIN_LED2
|
||||
|
||||
#define LED_RED PIN_LED1
|
||||
#define LED_BLUE PIN_LED2
|
||||
|
||||
#define LED_STATE_ON 1 // State when LED is litted
|
||||
|
||||
/*
|
||||
* Buttons
|
||||
*/
|
||||
#define PIN_BUTTON1 (7)
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A0 (14)
|
||||
#define PIN_A1 (15)
|
||||
#define PIN_A2 (16)
|
||||
#define PIN_A3 (17)
|
||||
#define PIN_A4 (18)
|
||||
#define PIN_A5 (19)
|
||||
#define PIN_A6 (20)
|
||||
#define PIN_A7 (21)
|
||||
|
||||
#define D0 (0)
|
||||
#define D1 (1)
|
||||
#define D2 (2)
|
||||
#define D3 (3)
|
||||
#define D4 (4)
|
||||
#define D5 (5)
|
||||
#define D6 (6)
|
||||
#define D7 (7)
|
||||
#define D8 (8)
|
||||
#define D9 (9)
|
||||
#define D10 (10)
|
||||
#define D11 (11)
|
||||
#define D12 (12)
|
||||
#define D13 (13)
|
||||
|
||||
static const uint8_t A0 = PIN_A0 ;
|
||||
static const uint8_t A1 = PIN_A1 ;
|
||||
static const uint8_t A2 = PIN_A2 ;
|
||||
static const uint8_t A3 = PIN_A3 ;
|
||||
static const uint8_t A4 = PIN_A4 ;
|
||||
static const uint8_t A5 = PIN_A5 ;
|
||||
static const uint8_t A6 = PIN_A6 ;
|
||||
static const uint8_t A7 = PIN_A7 ;
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
// Other pins
|
||||
#define PIN_AREF PIN_A7
|
||||
#define PIN_VBAT PIN_A6
|
||||
#define PIN_NFC1 (33)
|
||||
#define PIN_NFC2 (2)
|
||||
|
||||
static const uint8_t AREF = PIN_AREF;
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
#define PIN_SERIAL1_RX (1)
|
||||
#define PIN_SERIAL1_TX (0)
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_SPI_MISO (24) //24 original
|
||||
#define PIN_SPI_MOSI (25) //25 original
|
||||
#define PIN_SPI_SCK (26) //26 original
|
||||
|
||||
static const uint8_t SS = (13);
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI;
|
||||
static const uint8_t MISO = PIN_SPI_MISO;
|
||||
static const uint8_t SCK = PIN_SPI_SCK;
|
||||
|
||||
/*
|
||||
* Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (22)
|
||||
#define PIN_WIRE_SCL (23)
|
||||
|
||||
// QSPI Pins
|
||||
#define PIN_QSPI_SCK 27
|
||||
#define PIN_QSPI_CS 28
|
||||
#define PIN_QSPI_IO0 29
|
||||
#define PIN_QSPI_IO1 30
|
||||
#define PIN_QSPI_IO2 31
|
||||
#define PIN_QSPI_IO3 32
|
||||
|
||||
// On-board QSPI Flash
|
||||
#define EXTERNAL_FLASH_DEVICES GD25Q16C
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#endif //_VARIANT_NINA_B302_UBLOX_
|
||||
@@ -0,0 +1,649 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
# Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
# Copyright (c) 2017 Adafruit Industries. All right reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
menu.softdevice=Bootloader
|
||||
menu.debug=Debug
|
||||
|
||||
# ----------------------------------
|
||||
# Bluefruit Feather nRF52832
|
||||
# ----------------------------------
|
||||
feather52832.name=Adafruit Feather nRF52832
|
||||
feather52832.bootloader.tool=bootburn
|
||||
|
||||
# Upload
|
||||
feather52832.upload.tool=nrfutil
|
||||
feather52832.upload.protocol=nrfutil
|
||||
feather52832.upload.use_1200bps_touch=false
|
||||
feather52832.upload.wait_for_upload_port=false
|
||||
feather52832.upload.native_usb=false
|
||||
feather52832.upload.maximum_size=290816
|
||||
feather52832.upload.maximum_data_size=52224
|
||||
|
||||
# Build
|
||||
feather52832.build.mcu=cortex-m4
|
||||
feather52832.build.f_cpu=64000000
|
||||
feather52832.build.board=NRF52832_FEATHER
|
||||
feather52832.build.core=nRF5
|
||||
feather52832.build.variant=feather_nrf52832
|
||||
feather52832.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52832.build.usb_product="Feather nRF52832"
|
||||
feather52832.build.extra_flags=-DNRF52832_XXAA -DNRF52832_FEATHER -DNRF52
|
||||
feather52832.build.ldscript=nrf52832_s132_v6.ld
|
||||
|
||||
# SofDevice Menu
|
||||
feather52832.menu.softdevice.s132v6=0.3.2 SoftDevice s132 6.1.1
|
||||
feather52832.menu.softdevice.s132v6.build.sd_name=s132
|
||||
feather52832.menu.softdevice.s132v6.build.sd_version=6.1.1
|
||||
feather52832.menu.softdevice.s132v6.build.sd_fwid=0x00B7
|
||||
|
||||
# Debug Menu
|
||||
feather52832.menu.debug.l0=Level 0 (Release)
|
||||
feather52832.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
feather52832.menu.debug.l1=Level 1 (Error Message)
|
||||
feather52832.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
feather52832.menu.debug.l2=Level 2 (Full Debug)
|
||||
feather52832.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
feather52832.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
feather52832.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
feather52832.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Bluefruit Feather nRF52840 Express
|
||||
# ----------------------------------
|
||||
feather52840.name=Adafruit Feather nRF52840 Express
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
feather52840.vid.0=0x239A
|
||||
feather52840.pid.0=0x8029
|
||||
feather52840.vid.1=0x239A
|
||||
feather52840.pid.1=0x0029
|
||||
feather52840.vid.2=0x239A
|
||||
feather52840.pid.2=0x002A
|
||||
feather52840.vid.3=0x239A
|
||||
feather52840.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
feather52840.bootloader.tool=bootburn
|
||||
feather52840.upload.tool=nrfutil
|
||||
feather52840.upload.protocol=nrfutil
|
||||
feather52840.upload.use_1200bps_touch=true
|
||||
feather52840.upload.wait_for_upload_port=true
|
||||
feather52840.upload.maximum_size=815104
|
||||
feather52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
feather52840.build.mcu=cortex-m4
|
||||
feather52840.build.f_cpu=64000000
|
||||
feather52840.build.board=NRF52840_FEATHER
|
||||
feather52840.build.core=nRF5
|
||||
feather52840.build.variant=feather_nrf52840_express
|
||||
feather52840.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52840.build.usb_product="Feather nRF52840 Express"
|
||||
feather52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_FEATHER {build.flags.usb}
|
||||
feather52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
feather52840.build.vid=0x239A
|
||||
feather52840.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
feather52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
feather52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
feather52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
feather52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
feather52840.menu.debug.l0=Level 0 (Release)
|
||||
feather52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
feather52840.menu.debug.l1=Level 1 (Error Message)
|
||||
feather52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
feather52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
feather52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
feather52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
feather52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
feather52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
# ----------------------------------
|
||||
# Feather Bluefruit sense
|
||||
# ----------------------------------
|
||||
feather52840sense.name=Adafruit Feather Bluefruit Sense
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
feather52840sense.vid.0=0x239A
|
||||
feather52840sense.pid.0=0x8087
|
||||
feather52840sense.vid.1=0x239A
|
||||
feather52840sense.pid.1=0x0087
|
||||
feather52840sense.vid.2=0x239A
|
||||
feather52840sense.pid.2=0x0088
|
||||
feather52840sense.vid.3=0x239A
|
||||
feather52840sense.pid.3=0x8088
|
||||
|
||||
# Upload
|
||||
feather52840sense.bootloader.tool=bootburn
|
||||
feather52840sense.upload.tool=nrfutil
|
||||
feather52840sense.upload.protocol=nrfutil
|
||||
feather52840sense.upload.use_1200bps_touch=true
|
||||
feather52840sense.upload.wait_for_upload_port=true
|
||||
feather52840sense.upload.maximum_size=815104
|
||||
feather52840sense.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
feather52840sense.build.mcu=cortex-m4
|
||||
feather52840sense.build.f_cpu=64000000
|
||||
feather52840sense.build.board=NRF52840_FEATHER_SENSE
|
||||
feather52840sense.build.core=nRF5
|
||||
feather52840sense.build.variant=feather_nrf52840_sense
|
||||
feather52840sense.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52840sense.build.usb_product="Feather nRF52840 Sense"
|
||||
feather52840sense.build.extra_flags=-DNRF52840_XXAA -DNRF52840_FEATHER_SENSE {build.flags.usb}
|
||||
feather52840sense.build.ldscript=nrf52840_s140_v6.ld
|
||||
feather52840sense.build.vid=0x239A
|
||||
feather52840sense.build.pid=0x8087
|
||||
|
||||
# SofDevice Menu
|
||||
feather52840sense.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
feather52840sense.menu.softdevice.s140v6.build.sd_name=s140
|
||||
feather52840sense.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
feather52840sense.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
feather52840sense.menu.debug.l0=Level 0 (Release)
|
||||
feather52840sense.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
feather52840sense.menu.debug.l1=Level 1 (Error Message)
|
||||
feather52840sense.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
feather52840sense.menu.debug.l2=Level 2 (Full Debug)
|
||||
feather52840sense.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
feather52840sense.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
feather52840sense.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
feather52840sense.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
# ---------------------------------------------
|
||||
# Bluefruit ItsyBitsy nRF52840 Express
|
||||
# ---------------------------------------------
|
||||
itsybitsy52840.name=Adafruit ItsyBitsy nRF52840 Express
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
itsybitsy52840.vid.0=0x239A
|
||||
itsybitsy52840.pid.0=0x8051
|
||||
itsybitsy52840.vid.1=0x239A
|
||||
itsybitsy52840.pid.1=0x0051
|
||||
itsybitsy52840.vid.2=0x239A
|
||||
itsybitsy52840.pid.2=0x0052
|
||||
itsybitsy52840.vid.3=0x239A
|
||||
itsybitsy52840.pid.3=0x8052
|
||||
|
||||
# Upload
|
||||
itsybitsy52840.bootloader.tool=bootburn
|
||||
itsybitsy52840.upload.tool=nrfutil
|
||||
itsybitsy52840.upload.protocol=nrfutil
|
||||
itsybitsy52840.upload.use_1200bps_touch=true
|
||||
itsybitsy52840.upload.wait_for_upload_port=true
|
||||
itsybitsy52840.upload.maximum_size=815104
|
||||
itsybitsy52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
itsybitsy52840.build.mcu=cortex-m4
|
||||
itsybitsy52840.build.f_cpu=64000000
|
||||
itsybitsy52840.build.board=NRF52840_ITSYBITSY
|
||||
itsybitsy52840.build.core=nRF5
|
||||
itsybitsy52840.build.variant=itsybitsy_nrf52840_express
|
||||
itsybitsy52840.build.usb_manufacturer="Adafruit LLC"
|
||||
itsybitsy52840.build.usb_product="ItsyBitsy nRF52840 Express"
|
||||
itsybitsy52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_ITSYBITSY -DARDUINO_NRF52_ITSYBITSY {build.flags.usb}
|
||||
itsybitsy52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
itsybitsy52840.build.vid=0x239A
|
||||
itsybitsy52840.build.pid=0x8051
|
||||
|
||||
# SofDevice Menu
|
||||
itsybitsy52840.menu.softdevice.s140v6=0.2.11 SoftDevice s140 6.1.1
|
||||
itsybitsy52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
itsybitsy52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
itsybitsy52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
itsybitsy52840.menu.debug.l0=Level 0 (Release)
|
||||
itsybitsy52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
itsybitsy52840.menu.debug.l1=Level 1 (Error Message)
|
||||
itsybitsy52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
itsybitsy52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
itsybitsy52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
itsybitsy52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
itsybitsy52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
itsybitsy52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ---------------------------------------------
|
||||
# Bluefruit Circuit Playground nRF52840 Express
|
||||
# ---------------------------------------------
|
||||
cplaynrf52840.name=Adafruit Circuit Playground Bluefruit
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
cplaynrf52840.vid.0=0x239A
|
||||
cplaynrf52840.pid.0=0x8045
|
||||
cplaynrf52840.vid.1=0x239A
|
||||
cplaynrf52840.pid.1=0x0045
|
||||
cplaynrf52840.vid.2=0x239A
|
||||
cplaynrf52840.pid.2=0x0046
|
||||
cplaynrf52840.vid.3=0x239A
|
||||
cplaynrf52840.pid.3=0x8046
|
||||
|
||||
# Upload
|
||||
cplaynrf52840.bootloader.tool=bootburn
|
||||
cplaynrf52840.upload.tool=nrfutil
|
||||
cplaynrf52840.upload.protocol=nrfutil
|
||||
cplaynrf52840.upload.use_1200bps_touch=true
|
||||
cplaynrf52840.upload.wait_for_upload_port=true
|
||||
cplaynrf52840.upload.maximum_size=815104
|
||||
cplaynrf52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
cplaynrf52840.build.mcu=cortex-m4
|
||||
cplaynrf52840.build.f_cpu=64000000
|
||||
cplaynrf52840.build.board=NRF52840_CIRCUITPLAY
|
||||
cplaynrf52840.build.core=nRF5
|
||||
cplaynrf52840.build.variant=circuitplayground_nrf52840
|
||||
cplaynrf52840.build.usb_manufacturer="Adafruit LLC"
|
||||
cplaynrf52840.build.usb_product="Circuit Playground Bluefruit"
|
||||
cplaynrf52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_CIRCUITPLAY {build.flags.usb}
|
||||
cplaynrf52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
cplaynrf52840.build.vid=0x239A
|
||||
cplaynrf52840.build.pid=0x8045
|
||||
|
||||
# SofDevice Menu
|
||||
cplaynrf52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
cplaynrf52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
cplaynrf52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
cplaynrf52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
cplaynrf52840.menu.debug.l0=Level 0 (Release)
|
||||
cplaynrf52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
cplaynrf52840.menu.debug.l1=Level 1 (Error Message)
|
||||
cplaynrf52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
cplaynrf52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
cplaynrf52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
cplaynrf52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
cplaynrf52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
cplaynrf52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
# ---------------------------------------------
|
||||
# Clue nRF52840
|
||||
# ---------------------------------------------
|
||||
cluenrf52840.name=Adafruit CLUE
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
cluenrf52840.vid.0=0x239A
|
||||
cluenrf52840.pid.0=0x8072
|
||||
cluenrf52840.vid.1=0x239A
|
||||
cluenrf52840.pid.1=0x0072
|
||||
cluenrf52840.vid.2=0x239A
|
||||
cluenrf52840.pid.2=0x0071
|
||||
cluenrf52840.vid.3=0x239A
|
||||
cluenrf52840.pid.3=0x8071
|
||||
|
||||
# Upload
|
||||
cluenrf52840.bootloader.tool=bootburn
|
||||
cluenrf52840.upload.tool=nrfutil
|
||||
cluenrf52840.upload.protocol=nrfutil
|
||||
cluenrf52840.upload.use_1200bps_touch=true
|
||||
cluenrf52840.upload.wait_for_upload_port=true
|
||||
cluenrf52840.upload.maximum_size=815104
|
||||
cluenrf52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
cluenrf52840.build.mcu=cortex-m4
|
||||
cluenrf52840.build.f_cpu=64000000
|
||||
cluenrf52840.build.board=NRF52840_CLUE
|
||||
cluenrf52840.build.core=nRF5
|
||||
cluenrf52840.build.variant=clue_nrf52840
|
||||
cluenrf52840.build.usb_manufacturer="Adafruit LLC"
|
||||
cluenrf52840.build.usb_product="CLUE"
|
||||
cluenrf52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_CLUE {build.flags.usb}
|
||||
cluenrf52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
cluenrf52840.build.vid=0x239A
|
||||
cluenrf52840.build.pid=0x8071
|
||||
|
||||
# SofDevice Menu
|
||||
cluenrf52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
cluenrf52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
cluenrf52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
cluenrf52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
cluenrf52840.menu.debug.l0=Level 0 (Release)
|
||||
cluenrf52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
cluenrf52840.menu.debug.l1=Level 1 (Error Message)
|
||||
cluenrf52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
cluenrf52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
cluenrf52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
cluenrf52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
cluenrf52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
cluenrf52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Bluefruit Metro nRF52840 Express
|
||||
# ----------------------------------
|
||||
metro52840.name=Adafruit Bluefruit Metro nRF52840 Express
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
metro52840.vid.0=0x239A
|
||||
metro52840.pid.0=0x803F
|
||||
metro52840.vid.1=0x239A
|
||||
metro52840.pid.1=0x003F
|
||||
metro52840.vid.2=0x239A
|
||||
metro52840.pid.2=0x0040
|
||||
metro52840.vid.3=0x239A
|
||||
metro52840.pid.3=0x8040
|
||||
|
||||
# Upload
|
||||
metro52840.bootloader.tool=bootburn
|
||||
metro52840.upload.tool=nrfutil
|
||||
metro52840.upload.protocol=nrfutil
|
||||
metro52840.upload.use_1200bps_touch=true
|
||||
metro52840.upload.wait_for_upload_port=true
|
||||
metro52840.upload.maximum_size=815104
|
||||
metro52840.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
metro52840.build.mcu=cortex-m4
|
||||
metro52840.build.f_cpu=64000000
|
||||
metro52840.build.board=NRF52840_METRO
|
||||
metro52840.build.core=nRF5
|
||||
metro52840.build.variant=metro_nrf52840_express
|
||||
metro52840.build.usb_manufacturer="Adafruit LLC"
|
||||
metro52840.build.usb_product="Metro nRF52840 Express"
|
||||
metro52840.build.extra_flags=-DNRF52840_XXAA -DNRF52840_METRO {build.flags.usb}
|
||||
metro52840.build.ldscript=nrf52840_s140_v6.ld
|
||||
metro52840.build.vid=0x239A
|
||||
metro52840.build.pid=0x803F
|
||||
|
||||
# SofDevice Menu
|
||||
metro52840.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
metro52840.menu.softdevice.s140v6.build.sd_name=s140
|
||||
metro52840.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
metro52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
metro52840.menu.debug.l0=Level 0 (Release)
|
||||
metro52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
metro52840.menu.debug.l1=Level 1 (Error Message)
|
||||
metro52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
metro52840.menu.debug.l2=Level 2 (Full Debug)
|
||||
metro52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
metro52840.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
metro52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
metro52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
|
||||
|
||||
|
||||
# -------------------------------------------------------
|
||||
#
|
||||
# Boards that aren't made by Adafruit
|
||||
#
|
||||
# -------------------------------------------------------
|
||||
|
||||
|
||||
# ----------------------------------
|
||||
# Nordic nRF52840DK (PCA10056)
|
||||
# ----------------------------------
|
||||
pca10056.name=Nordic nRF52840DK (PCA10056)
|
||||
pca10056.bootloader.tool=bootburn
|
||||
|
||||
# Upload
|
||||
pca10056.upload.tool=nrfutil
|
||||
pca10056.upload.protocol=nrfutil
|
||||
pca10056.upload.use_1200bps_touch=true
|
||||
pca10056.upload.wait_for_upload_port=true
|
||||
pca10056.upload.maximum_size=815104
|
||||
pca10056.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
pca10056.build.mcu=cortex-m4
|
||||
pca10056.build.f_cpu=64000000
|
||||
pca10056.build.board=NRF52840_PCA10056
|
||||
pca10056.build.core=nRF5
|
||||
pca10056.build.variant=pca10056
|
||||
pca10056.build.usb_manufacturer="Nordic"
|
||||
pca10056.build.usb_product="nRF52840 DK"
|
||||
pca10056.build.extra_flags=-DNRF52840_XXAA -DNRF52840_PCA10056 {build.flags.usb}
|
||||
pca10056.build.ldscript=nrf52840_s140_v6.ld
|
||||
pca10056.build.vid=0x239A
|
||||
pca10056.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
pca10056.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
pca10056.menu.softdevice.s140v6.build.sd_name=s140
|
||||
pca10056.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
pca10056.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
pca10056.menu.debug.l0=Level 0 (Release)
|
||||
pca10056.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
pca10056.menu.debug.l1=Level 1 (Error Message)
|
||||
pca10056.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
pca10056.menu.debug.l2=Level 2 (Full Debug)
|
||||
pca10056.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
pca10056.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
pca10056.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
pca10056.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Particle Xenon
|
||||
# ----------------------------------
|
||||
particle_xenon.name=Particle Xenon
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
particle_xenon.vid.0=0x239A
|
||||
particle_xenon.pid.0=0x8029
|
||||
particle_xenon.vid.1=0x239A
|
||||
particle_xenon.pid.1=0x0029
|
||||
particle_xenon.vid.2=0x239A
|
||||
particle_xenon.pid.2=0x002A
|
||||
particle_xenon.vid.3=0x239A
|
||||
particle_xenon.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
particle_xenon.bootloader.tool=bootburn
|
||||
particle_xenon.upload.tool=nrfutil
|
||||
particle_xenon.upload.protocol=nrfutil
|
||||
particle_xenon.upload.use_1200bps_touch=true
|
||||
particle_xenon.upload.wait_for_upload_port=true
|
||||
particle_xenon.upload.maximum_size=815104
|
||||
particle_xenon.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
particle_xenon.build.mcu=cortex-m4
|
||||
particle_xenon.build.f_cpu=64000000
|
||||
particle_xenon.build.board=PARTICLE_XENON
|
||||
particle_xenon.build.core=nRF5
|
||||
particle_xenon.build.variant=particle_xenon
|
||||
particle_xenon.build.usb_manufacturer="Particle Industries"
|
||||
particle_xenon.build.usb_product="Particle Xenon"
|
||||
particle_xenon.build.extra_flags=-DNRF52840_XXAA -DPARTICLE_XENON {build.flags.usb}
|
||||
particle_xenon.build.ldscript=nrf52840_s140_v6.ld
|
||||
particle_xenon.build.vid=0x239A
|
||||
particle_xenon.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
particle_xenon.menu.softdevice.s140v6=0.2.11 SoftDevice s140 6.1.1
|
||||
particle_xenon.menu.softdevice.s140v6.build.sd_name=s140
|
||||
particle_xenon.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
particle_xenon.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
particle_xenon.menu.debug.l0=Level 0 (Release)
|
||||
particle_xenon.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
particle_xenon.menu.debug.l1=Level 1 (Error Message)
|
||||
particle_xenon.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
particle_xenon.menu.debug.l2=Level 2 (Full Debug)
|
||||
particle_xenon.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
particle_xenon.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
particle_xenon.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
particle_xenon.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# Raytac MDBT50Q - RX
|
||||
# ----------------------------------
|
||||
mdbt50qrx.name=Raytac MDBT50Q-RX Dongle
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
mdbt50qrx.vid.0=0x239A
|
||||
mdbt50qrx.pid.0=0x8029
|
||||
mdbt50qrx.vid.1=0x239A
|
||||
mdbt50qrx.pid.1=0x0029
|
||||
mdbt50qrx.vid.2=0x239A
|
||||
mdbt50qrx.pid.2=0x002A
|
||||
mdbt50qrx.vid.3=0x239A
|
||||
mdbt50qrx.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
mdbt50qrx.bootloader.tool=bootburn
|
||||
mdbt50qrx.upload.tool=nrfutil
|
||||
mdbt50qrx.upload.protocol=nrfutil
|
||||
mdbt50qrx.upload.use_1200bps_touch=true
|
||||
mdbt50qrx.upload.wait_for_upload_port=true
|
||||
mdbt50qrx.upload.maximum_size=815104
|
||||
mdbt50qrx.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
mdbt50qrx.build.mcu=cortex-m4
|
||||
mdbt50qrx.build.f_cpu=64000000
|
||||
mdbt50qrx.build.board=MDBT50Q_RX
|
||||
mdbt50qrx.build.core=nRF5
|
||||
mdbt50qrx.build.variant=raytac_mdbt50q_rx
|
||||
mdbt50qrx.build.usb_manufacturer="Raytac Corporation"
|
||||
mdbt50qrx.build.usb_product="Raytac MDBT50Q - RX"
|
||||
mdbt50qrx.build.extra_flags=-DNRF52840_XXAA -DMDBT50Q_RX {build.flags.usb}
|
||||
mdbt50qrx.build.ldscript=nrf52840_s140_v6.ld
|
||||
mdbt50qrx.build.vid=0x239A
|
||||
mdbt50qrx.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
mdbt50qrx.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
mdbt50qrx.menu.softdevice.s140v6.build.sd_name=s140
|
||||
mdbt50qrx.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
mdbt50qrx.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
mdbt50qrx.menu.debug.l0=Level 0 (Release)
|
||||
mdbt50qrx.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
mdbt50qrx.menu.debug.l1=Level 1 (Error Message)
|
||||
mdbt50qrx.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
mdbt50qrx.menu.debug.l2=Level 2 (Full Debug)
|
||||
mdbt50qrx.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
mdbt50qrx.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
mdbt50qrx.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
mdbt50qrx.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# NINA B302
|
||||
# ----------------------------------
|
||||
ninab302.name=NINA B302 ublox
|
||||
|
||||
# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
|
||||
ninab302.vid.0=0x239A
|
||||
ninab302.pid.0=0x8029
|
||||
ninab302.vid.1=0x239A
|
||||
ninab302.pid.1=0x0029
|
||||
ninab302.vid.2=0x7239A
|
||||
ninab302.pid.2=0x002A
|
||||
ninab302.vid.3=0x239A
|
||||
ninab302.pid.3=0x802A
|
||||
|
||||
# Upload
|
||||
ninab302.bootloader.tool=bootburn
|
||||
ninab302.upload.tool=nrfutil
|
||||
ninab302.upload.protocol=nrfutil
|
||||
ninab302.upload.use_1200bps_touch=true
|
||||
ninab302.upload.wait_for_upload_port=true
|
||||
ninab302.upload.maximum_size=815104
|
||||
ninab302.upload.maximum_data_size=237568
|
||||
|
||||
# Build
|
||||
ninab302.build.mcu=cortex-m4
|
||||
ninab302.build.f_cpu=64000000
|
||||
ninab302.build.board=NINA_B302_ublox
|
||||
ninab302.build.core=nRF5
|
||||
ninab302.build.variant=NINA_B302_ublox
|
||||
ninab302.build.usb_manufacturer="Nordic"
|
||||
ninab302.build.usb_product="NINA B302 ublox"
|
||||
ninab302.build.extra_flags=-DNRF52840_XXAA -DNINA_B302_ublox {build.flags.usb}
|
||||
ninab302.build.ldscript=nrf52840_s140_v6.ld
|
||||
ninab302.build.vid=0x239A
|
||||
ninab302.build.pid=0x8029
|
||||
|
||||
# SofDevice Menu
|
||||
ninab302.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
|
||||
ninab302.menu.softdevice.s140v6.build.sd_name=s140
|
||||
ninab302.menu.softdevice.s140v6.build.sd_version=6.1.1
|
||||
ninab302.menu.softdevice.s140v6.build.sd_fwid=0x00B6
|
||||
|
||||
# Debug Menu
|
||||
ninab302.menu.debug.l0=Level 0 (Release)
|
||||
ninab302.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
ninab302.menu.debug.l1=Level 1 (Error Message)
|
||||
ninab302.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
ninab302.menu.debug.l2=Level 2 (Full Debug)
|
||||
ninab302.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
ninab302.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
ninab302.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
ninab302.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
|
||||
# ----------------------------------
|
||||
# NINA B112
|
||||
# ----------------------------------
|
||||
ninab112.name=NINA B112 ublox
|
||||
ninab112.bootloader.tool=bootburn
|
||||
|
||||
# Upload
|
||||
ninab112.upload.tool=nrfutil
|
||||
ninab112.upload.protocol=nrfutil
|
||||
ninab112.upload.use_1200bps_touch=false
|
||||
ninab112.upload.wait_for_upload_port=false
|
||||
ninab112.upload.native_usb=false
|
||||
ninab112.upload.maximum_size=290816
|
||||
ninab112.upload.maximum_data_size=52224
|
||||
|
||||
# Build
|
||||
ninab112.build.mcu=cortex-m4
|
||||
ninab112.build.f_cpu=64000000
|
||||
ninab112.build.board=NINA_B112_ublox
|
||||
ninab112.build.core=nRF5
|
||||
ninab112.build.variant=NINA_B112_ublox
|
||||
feather52840.build.usb_manufacturer="Adafruit LLC"
|
||||
feather52840.build.usb_product="Feather nRF52832"
|
||||
ninab112.build.extra_flags=-DNRF52832_XXAA -DNINA_B112_ublox -DNRF52
|
||||
ninab112.build.ldscript=nrf52832_s132_v6.ld
|
||||
|
||||
# SofDevice Menu
|
||||
ninab112.menu.softdevice.s132v6=0.3.2 SoftDevice s132 6.1.1
|
||||
ninab112.menu.softdevice.s132v6.build.sd_name=s132
|
||||
ninab112.menu.softdevice.s132v6.build.sd_version=6.1.1
|
||||
ninab112.menu.softdevice.s132v6.build.sd_fwid=0x00B7
|
||||
|
||||
# Debug Menu
|
||||
ninab112.menu.debug.l0=Level 0 (Release)
|
||||
ninab112.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
|
||||
ninab112.menu.debug.l1=Level 1 (Error Message)
|
||||
ninab112.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
|
||||
ninab112.menu.debug.l2=Level 2 (Full Debug)
|
||||
ninab112.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
|
||||
ninab112.menu.debug.l3=Level 3 (Segger SystemView)
|
||||
ninab112.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
|
||||
ninab112.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
|
||||
@@ -0,0 +1,92 @@
|
||||
/*
|
||||
* Udp.cpp: Library to send/receive UDP packets.
|
||||
*
|
||||
* NOTE: UDP is fast, but has some important limitations (thanks to Warren Gray for mentioning these)
|
||||
* 1) UDP does not guarantee the order in which assembled UDP packets are received. This
|
||||
* might not happen often in practice, but in larger network topologies, a UDP
|
||||
* packet can be received out of sequence.
|
||||
* 2) UDP does not guard against lost packets - so packets *can* disappear without the sender being
|
||||
* aware of it. Again, this may not be a concern in practice on small local networks.
|
||||
* For more information, see http://www.cafeaulait.org/course/week12/35.html
|
||||
*
|
||||
* MIT License:
|
||||
* Copyright (c) 2008 Bjoern Hartmann
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
* of this software and associated documentation files (the "Software"), to deal
|
||||
* in the Software without restriction, including without limitation the rights
|
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
* copies of the Software, and to permit persons to whom the Software is
|
||||
* furnished to do so, subject to the following conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in
|
||||
* all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||
* THE SOFTWARE.
|
||||
*
|
||||
* bjoern@cs.stanford.edu 12/30/2008
|
||||
*/
|
||||
|
||||
#ifndef udp_h
|
||||
#define udp_h
|
||||
|
||||
#include <Stream.h>
|
||||
#include <IPAddress.h>
|
||||
|
||||
class UDP : public Stream {
|
||||
|
||||
public:
|
||||
virtual uint8_t begin(uint16_t) =0; // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
|
||||
|
||||
// KH, add virtual function to support Multicast, necessary for many services (MDNS, etc.)
|
||||
virtual uint8_t beginMulticast(IPAddress, uint16_t) { return 0; } // initialize, start listening on specified multicast IP address and port. Returns 1 if successful, 0 on failure
|
||||
|
||||
virtual void stop() =0; // Finish with the UDP socket
|
||||
|
||||
// Sending UDP packets
|
||||
|
||||
// Start building up a packet to send to the remote host specific in ip and port
|
||||
// Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
|
||||
virtual int beginPacket(IPAddress ip, uint16_t port) =0;
|
||||
// Start building up a packet to send to the remote host specific in host and port
|
||||
// Returns 1 if successful, 0 if there was a problem resolving the hostname or port
|
||||
virtual int beginPacket(const char *host, uint16_t port) =0;
|
||||
// Finish off this packet and send it
|
||||
// Returns 1 if the packet was sent successfully, 0 if there was an error
|
||||
virtual int endPacket() =0;
|
||||
// Write a single byte into the packet
|
||||
virtual size_t write(uint8_t) =0;
|
||||
// Write size bytes from buffer into the packet
|
||||
virtual size_t write(const uint8_t *buffer, size_t size) =0;
|
||||
|
||||
// Start processing the next available incoming packet
|
||||
// Returns the size of the packet in bytes, or 0 if no packets are available
|
||||
virtual int parsePacket() =0;
|
||||
// Number of bytes remaining in the current packet
|
||||
virtual int available() =0;
|
||||
// Read a single byte from the current packet
|
||||
virtual int read() =0;
|
||||
// Read up to len bytes from the current packet and place them into buffer
|
||||
// Returns the number of bytes read, or 0 if none are available
|
||||
virtual int read(unsigned char* buffer, size_t len) =0;
|
||||
// Read up to len characters from the current packet and place them into buffer
|
||||
// Returns the number of characters read, or 0 if none are available
|
||||
virtual int read(char* buffer, size_t len) =0;
|
||||
// Return the next byte from the current packet without moving on to the next byte
|
||||
virtual int peek() =0;
|
||||
virtual void flush() =0; // Finish reading the current packet
|
||||
|
||||
// Return the IP address of the host who sent the current incoming packet
|
||||
virtual IPAddress remoteIP() =0;
|
||||
// Return the port of the host who sent the current incoming packet
|
||||
virtual uint16_t remotePort() =0;
|
||||
protected:
|
||||
uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
|
||||
};
|
||||
|
||||
#endif
|
||||
@@ -0,0 +1,164 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
# Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
# Copyright (c) 2017 Adafruit Industries. All rights reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
name=Adafruit nRF52 Boards
|
||||
version=0.20.5
|
||||
|
||||
# Compile variables
|
||||
# -----------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall
|
||||
compiler.warning_flags.all=-Wall -Wextra -Wno-unused-parameter -Wno-missing-field-initializers -Wno-pointer-arith
|
||||
|
||||
compiler.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.warning_flags} {build.float_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
|
||||
# KH, Error here to use gcc, mjust use g++
|
||||
#compiler.c.elf.cmd=arm-none-eabi-gcc
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags=-Ofast -Wl,--gc-sections -save-temps
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.warning_flags} {build.float_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
compiler.objcopy.cmd=arm-none-eabi-objcopy
|
||||
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
|
||||
compiler.elf2bin.flags=-O binary
|
||||
compiler.elf2bin.cmd=arm-none-eabi-objcopy
|
||||
compiler.elf2hex.flags=-O ihex
|
||||
compiler.elf2hex.cmd=arm-none-eabi-objcopy
|
||||
compiler.ldflags=-mcpu={build.mcu} -mthumb {build.float_flags} -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align --specs=nano.specs --specs=nosys.specs
|
||||
compiler.size.cmd=arm-none-eabi-size
|
||||
|
||||
# this can be overriden in boards.txt
|
||||
build.float_flags=-mfloat-abi=hard -mfpu=fpv4-sp-d16 -u _printf_float
|
||||
build.debug_flags=-DCFG_DEBUG=0
|
||||
build.logger_flags=-DCFG_LOGGER=1
|
||||
build.sysview_flags=-DCFG_SYSVIEW=0
|
||||
|
||||
# common compiler for nrf
|
||||
rtos.path={build.core.path}/freertos
|
||||
nordic.path={build.core.path}/nordic
|
||||
|
||||
# build.logger_flags and build.sysview_flags and intentionally empty,
|
||||
# to allow modification via a user's own boards.local.txt or platform.local.txt files.
|
||||
build.flags.nrf= -DSOFTDEVICE_PRESENT -DARDUINO_NRF52_ADAFRUIT -DNRF52_SERIES -DLFS_NAME_MAX=64 -Ofast {build.debug_flags} {build.logger_flags} {build.sysview_flags} "-I{build.core.path}/cmsis/Core/Include" "-I{nordic.path}" "-I{nordic.path}/nrfx" "-I{nordic.path}/nrfx/hal" "-I{nordic.path}/nrfx/mdk" "-I{nordic.path}/nrfx/soc" "-I{nordic.path}/nrfx/drivers/include" "-I{nordic.path}/nrfx/drivers/src" "-I{nordic.path}/softdevice/{build.sd_name}_nrf52_{build.sd_version}_API/include" "-I{rtos.path}/Source/include" "-I{rtos.path}/config" "-I{rtos.path}/portable/GCC/nrf52" "-I{rtos.path}/portable/CMSIS/nrf52" "-I{build.core.path}/sysview/SEGGER" "-I{build.core.path}/sysview/Config" "-I{build.core.path}/TinyUSB" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src"
|
||||
|
||||
# usb flags
|
||||
build.flags.usb= -DUSBCON -DUSE_TINYUSB -DUSB_VID={build.vid} -DUSB_PID={build.pid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
|
||||
|
||||
# These can be overridden in platform.local.txt
|
||||
compiler.c.extra_flags=
|
||||
compiler.c.elf.extra_flags=
|
||||
compiler.cpp.extra_flags=
|
||||
compiler.S.extra_flags=
|
||||
compiler.ar.extra_flags=
|
||||
compiler.elf2bin.extra_flags=
|
||||
compiler.elf2hex.extra_flags=
|
||||
|
||||
|
||||
# Compile patterns
|
||||
# ----------------
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.c.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.c.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile c++ files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.cpp.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.cpp.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile S files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Create archives
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Combine gc-sections, archives, and objects
|
||||
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-L{build.core.path}/linker" "-T{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} -Wl,--start-group -lm "{build.path}/{archive_file}" -Wl,--end-group
|
||||
|
||||
## Create output (bin file)
|
||||
#recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2bin.cmd}" {compiler.elf2bin.flags} {compiler.elf2bin.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
|
||||
|
||||
## Create output (hex file)
|
||||
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
## Create dfu package zip file
|
||||
recipe.objcopy.zip.pattern="{tools.nrfutil.cmd}" dfu genpkg --dev-type 0x0052 --sd-req {build.sd_fwid} --application "{build.path}/{build.project_name}.hex" "{build.path}/{build.project_name}.zip"
|
||||
|
||||
## Create uf2 file
|
||||
#recipe.objcopy.uf2.pattern=python "{runtime.platform.path}/tools/uf2conv/uf2conv.py" -f 0xADA52840 -c -o "{build.path}/{build.project_name}.uf2" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
## Save bin
|
||||
recipe.output.tmp_file_bin={build.project_name}.bin
|
||||
recipe.output.save_file_bin={build.project_name}.save.bin
|
||||
|
||||
## Save hex
|
||||
recipe.output.tmp_file_hex={build.project_name}.hex
|
||||
recipe.output.save_file_hexu={build.project_name}.save.hex
|
||||
|
||||
## Compute size
|
||||
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
|
||||
recipe.size.regex=^(?:\.text|\.data|)\s+([0-9]+).*
|
||||
recipe.size.regex.data=^(?:\.data|\.bss)\s+([0-9]+).*
|
||||
|
||||
## Export Compiled Binary
|
||||
recipe.output.tmp_file={build.project_name}.hex
|
||||
recipe.output.save_file={build.project_name}.{build.variant}.hex
|
||||
|
||||
#***************************************************
|
||||
# adafruit-nrfutil for uploading
|
||||
# https://github.com/adafruit/Adafruit_nRF52_nrfutil
|
||||
# pre-built binaries are provided for macos and windows
|
||||
#***************************************************
|
||||
tools.nrfutil.cmd=adafruit-nrfutil
|
||||
tools.nrfutil.cmd.windows={runtime.platform.path}/tools/adafruit-nrfutil/win32/adafruit-nrfutil.exe
|
||||
tools.nrfutil.cmd.macosx={runtime.platform.path}/tools/adafruit-nrfutil/macos/adafruit-nrfutil
|
||||
|
||||
tools.nrfutil.upload.params.verbose=--verbose
|
||||
tools.nrfutil.upload.params.quiet=
|
||||
tools.nrfutil.upload.pattern="{cmd}" {upload.verbose} dfu serial -pkg "{build.path}/{build.project_name}.zip" -p {serial.port} -b 115200 --singlebank
|
||||
|
||||
#***************************************************
|
||||
# Burning bootloader with either jlink or nrfutil
|
||||
#***************************************************
|
||||
|
||||
# Bootloader version
|
||||
tools.bootburn.bootloader.file={runtime.platform.path}/bootloader/{build.variant}/{build.variant}_bootloader-0.3.2_{build.sd_name}_{build.sd_version}
|
||||
|
||||
tools.bootburn.bootloader.params.verbose=
|
||||
tools.bootburn.bootloader.params.quiet=
|
||||
tools.bootburn.bootloader.pattern={program.burn_pattern}
|
||||
|
||||
# erase flash page while programming
|
||||
tools.bootburn.erase.params.verbose=
|
||||
tools.bootburn.erase.params.quiet=
|
||||
tools.bootburn.erase.pattern=
|
||||
|
||||
+17
@@ -0,0 +1,17 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// API compatibility
|
||||
#include "variant.h"
|
||||
@@ -0,0 +1,62 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip).
|
||||
// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
|
||||
|
||||
#include "variant.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
#include "nrf.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
0,
|
||||
1,
|
||||
2,
|
||||
3,
|
||||
4,
|
||||
5,
|
||||
6,
|
||||
7,
|
||||
8,
|
||||
9,
|
||||
10,
|
||||
11,
|
||||
12,
|
||||
13,
|
||||
14,
|
||||
15,
|
||||
16,
|
||||
17,
|
||||
18,
|
||||
19,
|
||||
20,
|
||||
21,
|
||||
22,
|
||||
23,
|
||||
24,
|
||||
25,
|
||||
26,
|
||||
27,
|
||||
28,
|
||||
29,
|
||||
30,
|
||||
31
|
||||
};
|
||||
|
||||
@@ -0,0 +1,173 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef _VARIANT_NINA_B112_UBLOX_
|
||||
#define _VARIANT_NINA_B112_UBLOX_
|
||||
|
||||
#define NRF_CLOCK_LFCLKSRC {.source = NRF_CLOCK_LF_SRC_XTAL, \
|
||||
.rc_ctiv = 0, \
|
||||
.rc_temp_ctiv = 0, \
|
||||
.xtal_accuracy = NRF_CLOCK_LF_XTAL_ACCURACY_20_PPM}
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
// define USE_LFRC // Board uses RC for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif // __cplusplus
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (32u)
|
||||
#define NUM_DIGITAL_PINS (32u)
|
||||
#define NUM_ANALOG_INPUTS (6u)
|
||||
#define NUM_ANALOG_OUTPUTS (0u)
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED LED1
|
||||
#define LED_BUILTIN PIN_LED
|
||||
|
||||
//LEDs onboard
|
||||
#define LED1 (8) // Red
|
||||
#define LED2 (16) // Green/SW1
|
||||
#define LED3 (18) // Blue
|
||||
|
||||
#define LED_STATE_ON 1 // State when LED is litted
|
||||
|
||||
//Switch
|
||||
|
||||
#define SW1 (16)
|
||||
#define SW2 (30)
|
||||
|
||||
// NFC
|
||||
#define PIN_NFC_1 (9) // P0.9
|
||||
#define PIN_NFC_2 (10) // P0.10
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A0 (3) // P0.03
|
||||
#define PIN_A1 (2) // P0.02
|
||||
#define PIN_A2 (4) // P0.04
|
||||
#define PIN_A3 (30) // P0.30
|
||||
#define PIN_A4 (29) // P0.29
|
||||
#define PIN_A5 (28) // P0.28
|
||||
|
||||
static const uint8_t A0 = PIN_A0 ;
|
||||
static const uint8_t A1 = PIN_A1 ;
|
||||
static const uint8_t A2 = PIN_A2 ;
|
||||
static const uint8_t A3 = PIN_A3 ;
|
||||
static const uint8_t A4 = PIN_A4 ;
|
||||
static const uint8_t A5 = PIN_A5 ;
|
||||
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
#define PIN_D0 (5) // P0.05
|
||||
#define PIN_D1 (6) // P0.06
|
||||
#define PIN_D2 (7) // P0.07
|
||||
#define PIN_D3 (31) // P0.31
|
||||
#define PIN_D4 (18) // P0.18
|
||||
#define PIN_D6 (9) // P0.09
|
||||
#define PIN_D7 (10) // P0.10
|
||||
#define PIN_D9 (8) // P0.8
|
||||
#define PIN_D10 (11) // P0.11
|
||||
#define PIN_D11 (13) // P0.13
|
||||
#define PIN_D12 (12) // P0.12
|
||||
#define PIN_D13 (14) // P0.14
|
||||
#define PIN_D14 (2) // P0.02
|
||||
#define PIN_D15 (3) // P0.03
|
||||
|
||||
static const uint8_t D0 = PIN_D0 ;
|
||||
static const uint8_t D1 = PIN_D1 ;
|
||||
static const uint8_t D2 = PIN_D2 ;
|
||||
static const uint8_t D3 = PIN_D3 ;
|
||||
static const uint8_t D4 = PIN_D4 ;
|
||||
static const uint8_t D6 = PIN_D6 ;
|
||||
static const uint8_t D7 = PIN_D7 ;
|
||||
static const uint8_t D9 = PIN_D9 ;
|
||||
static const uint8_t D10 = PIN_D10 ;
|
||||
static const uint8_t D11 = PIN_D11 ;
|
||||
static const uint8_t D12 = PIN_D12 ;
|
||||
static const uint8_t D13 = PIN_D13 ;
|
||||
static const uint8_t D14 = PIN_D14 ;
|
||||
static const uint8_t D15 = PIN_D15 ;
|
||||
|
||||
// Other pins
|
||||
//static const uint8_t AREF = PIN_AREF;
|
||||
|
||||
//#define PIN_AREF (24)
|
||||
//#define PIN_VBAT PIN_A7
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
//#define PIN_SERIAL_RX (8) //used for original Adafruit Bootloader
|
||||
//#define PIN_SERIAL_TX (6) //used for original Adafruit Bootloader
|
||||
|
||||
#define PIN_SERIAL_RX (5) // P0.05
|
||||
#define PIN_SERIAL_TX (6) // P0.06
|
||||
#define PIN_SERIAL_CTS (7) // P0.07
|
||||
#define PIN_SERIAL_RTS (31) // P0.31
|
||||
#define PIN_SERIAL_DTR (28) // P0.28
|
||||
#define PIN_SERIAL_DSR (29) // P0.29
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_SPI_MISO (12) // P0.12
|
||||
#define PIN_SPI_MOSI (13) // P0.13
|
||||
#define PIN_SPI_SCK (14) // P0.14
|
||||
|
||||
static const uint8_t SS = 11 ; // P0.11
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI ;
|
||||
static const uint8_t MISO = PIN_SPI_MISO ;
|
||||
static const uint8_t SCK = PIN_SPI_SCK ;
|
||||
|
||||
/*
|
||||
* Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (2) // P0.02
|
||||
#define PIN_WIRE_SCL (3) // P0.03
|
||||
|
||||
static const uint8_t SDA = PIN_WIRE_SDA;
|
||||
static const uint8_t SCL = PIN_WIRE_SCL;
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
|
||||
#endif //_VARIANT_NINA_B112_UBLOX_
|
||||
+17
@@ -0,0 +1,17 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// API compatibility
|
||||
#include "variant.h"
|
||||
@@ -0,0 +1,109 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip).
|
||||
// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
|
||||
|
||||
#include "variant.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
#include "nrf.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] =
|
||||
{
|
||||
// D0 .. D13
|
||||
29, // D0 is P0.29 (UART TX)
|
||||
45, // D1 is P1.13 (UART RX
|
||||
44, // D2 is P1.12 (NFC2)
|
||||
31, // D3 is P0.31 (LED1)
|
||||
13, // D4 is P0.13 (LED2)
|
||||
11, // D5 is P0.11
|
||||
9, // D6 is P0.09
|
||||
10, // D7 is P0.10 (Button)
|
||||
41, // D8 is P1.09 (NeoPixel)
|
||||
12, // D9 is P0.12
|
||||
14, // D10 is P0.14
|
||||
15, // D11 is P0.15
|
||||
32, // D12 is P1.00
|
||||
7, // D13 is P0.07
|
||||
|
||||
// D14 .. D21 (aka A0 .. A7)
|
||||
4, // D14 is P0.04 (A0)
|
||||
30, // D15 is P0.30 (A1)
|
||||
5, // D16 is P0.05 (A2)
|
||||
2, // D17 is P0.02 (A3)
|
||||
28, // D18 is P0.28 (A4)
|
||||
3, // D19 is P0.03 (A5)
|
||||
29, // D20 is P0.29 (A6, Battery) ????
|
||||
31, // D21 is P0.31 (A7, ARef) ????
|
||||
|
||||
// D22 .. D23 (aka I2C pins)
|
||||
16, // D22 is P0.16 (SDA)
|
||||
24, // D23 is P0.24 (SCL)
|
||||
|
||||
// D24 .. D26 (aka SPI pins)
|
||||
32, // D24 is P1.00 (SPI MISO)
|
||||
15, // D25 is P0.15 (SPI MOSI)
|
||||
7, // D26 is P0.07 (SPI SCK )
|
||||
|
||||
// QSPI pins (not exposed via any header / test point)
|
||||
19, // D27 is P0.19 (QSPI CLK)
|
||||
17, // D28 is P0.17 (QSPI CS)
|
||||
20, // D29 is P0.20 (QSPI Data 0)
|
||||
21, // D30 is P0.21 (QSPI Data 1)
|
||||
22, // D31 is P0.22 (QSPI Data 2)
|
||||
23, // D32 is P0.23 (QSPI Data 3)
|
||||
|
||||
// The remaining NFC pin
|
||||
9, // D33 is P0.09 (NFC1, exposed only via test point on bottom of board)
|
||||
|
||||
// Thus, there are 34 defined pins
|
||||
|
||||
// The remaining pins are not usable:
|
||||
//
|
||||
//
|
||||
// The following pins were never listed as they were considered unusable
|
||||
// 0, // P0.00 is XL1 (attached to 32.768kHz crystal)
|
||||
// 1, // P0.01 is XL2 (attached to 32.768kHz crystal)
|
||||
// 18, // P0.18 is RESET (attached to switch)
|
||||
// 32, // P1.00 is SWO (attached to debug header)
|
||||
//
|
||||
// The remaining pins are not connected (per schematic)
|
||||
// 33, // P1.01 is not connected per schematic
|
||||
// 35, // P1.03 is not connected per schematic
|
||||
// 36, // P1.04 is not connected per schematic
|
||||
// 37, // P1.05 is not connected per schematic
|
||||
// 38, // P1.06 is not connected per schematic
|
||||
// 39, // P1.07 is not connected per schematic
|
||||
// 43, // P1.11 is not connected per schematic
|
||||
// 44, // P1.12 is not connected per schematic
|
||||
// 45, // P1.13 is not connected per schematic
|
||||
// 46, // P1.14 is not connected per schematic
|
||||
};
|
||||
|
||||
void initVariant()
|
||||
{
|
||||
// LED1 & LED2
|
||||
pinMode(PIN_LED1, OUTPUT);
|
||||
ledOff(PIN_LED1);
|
||||
|
||||
pinMode(PIN_LED2, OUTPUT);
|
||||
ledOff(PIN_LED2);
|
||||
}
|
||||
|
||||
@@ -0,0 +1,159 @@
|
||||
/*
|
||||
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
Copyright (c) 2016 Sandeep Mistry All right reserved.
|
||||
Copyright (c) 2018, Adafruit Industries (adafruit.com)
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU Lesser General Public License for more details.
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip).
|
||||
// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
|
||||
|
||||
#ifndef _VARIANT_NINA_B302_UBLOX_
|
||||
#define _VARIANT_NINA_B302_UBLOX_
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
// define USE_LFRC // Board uses RC for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"
|
||||
{
|
||||
#endif // __cplusplus
|
||||
// (XX) = TABLE INDEX
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (34)
|
||||
#define NUM_DIGITAL_PINS (34)
|
||||
#define NUM_ANALOG_INPUTS (6) // A6 is used for battery, A7 is analog reference
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED1 (3)
|
||||
#define PIN_LED2 (4)
|
||||
#define PIN_NEOPIXEL (8)
|
||||
|
||||
#define LED_BUILTIN PIN_LED1
|
||||
#define LED_CONN PIN_LED2
|
||||
|
||||
#define LED_RED PIN_LED1
|
||||
#define LED_BLUE PIN_LED2
|
||||
|
||||
#define LED_STATE_ON 1 // State when LED is litted
|
||||
|
||||
/*
|
||||
* Buttons
|
||||
*/
|
||||
#define PIN_BUTTON1 (7)
|
||||
|
||||
/*
|
||||
* Analog pins
|
||||
*/
|
||||
#define PIN_A0 (14)
|
||||
#define PIN_A1 (15)
|
||||
#define PIN_A2 (16)
|
||||
#define PIN_A3 (17)
|
||||
#define PIN_A4 (18)
|
||||
#define PIN_A5 (19)
|
||||
#define PIN_A6 (20)
|
||||
#define PIN_A7 (21)
|
||||
|
||||
#define D0 (0)
|
||||
#define D1 (1)
|
||||
#define D2 (2)
|
||||
#define D3 (3)
|
||||
#define D4 (4)
|
||||
#define D5 (5)
|
||||
#define D6 (6)
|
||||
#define D7 (7)
|
||||
#define D8 (8)
|
||||
#define D9 (9)
|
||||
#define D10 (10)
|
||||
#define D11 (11)
|
||||
#define D12 (12)
|
||||
#define D13 (13)
|
||||
|
||||
static const uint8_t A0 = PIN_A0 ;
|
||||
static const uint8_t A1 = PIN_A1 ;
|
||||
static const uint8_t A2 = PIN_A2 ;
|
||||
static const uint8_t A3 = PIN_A3 ;
|
||||
static const uint8_t A4 = PIN_A4 ;
|
||||
static const uint8_t A5 = PIN_A5 ;
|
||||
static const uint8_t A6 = PIN_A6 ;
|
||||
static const uint8_t A7 = PIN_A7 ;
|
||||
#define ADC_RESOLUTION 14
|
||||
|
||||
// Other pins
|
||||
#define PIN_AREF PIN_A7
|
||||
#define PIN_VBAT PIN_A6
|
||||
#define PIN_NFC1 (33)
|
||||
#define PIN_NFC2 (2)
|
||||
|
||||
static const uint8_t AREF = PIN_AREF;
|
||||
|
||||
/*
|
||||
* Serial interfaces
|
||||
*/
|
||||
#define PIN_SERIAL1_RX (1)
|
||||
#define PIN_SERIAL1_TX (0)
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_SPI_MISO (24) //24 original
|
||||
#define PIN_SPI_MOSI (25) //25 original
|
||||
#define PIN_SPI_SCK (26) //26 original
|
||||
|
||||
static const uint8_t SS = (13);
|
||||
static const uint8_t MOSI = PIN_SPI_MOSI;
|
||||
static const uint8_t MISO = PIN_SPI_MISO;
|
||||
static const uint8_t SCK = PIN_SPI_SCK;
|
||||
|
||||
/*
|
||||
* Wire Interfaces
|
||||
*/
|
||||
#define WIRE_INTERFACES_COUNT 1
|
||||
|
||||
#define PIN_WIRE_SDA (22)
|
||||
#define PIN_WIRE_SCL (23)
|
||||
|
||||
// QSPI Pins
|
||||
#define PIN_QSPI_SCK 27
|
||||
#define PIN_QSPI_CS 28
|
||||
#define PIN_QSPI_IO0 29
|
||||
#define PIN_QSPI_IO1 30
|
||||
#define PIN_QSPI_IO2 31
|
||||
#define PIN_QSPI_IO3 32
|
||||
|
||||
// On-board QSPI Flash
|
||||
#define EXTERNAL_FLASH_DEVICES GD25Q16C
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#endif //_VARIANT_NINA_B302_UBLOX_
|
||||
@@ -0,0 +1,232 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
# Arduino SAMD Core and platform.
|
||||
#
|
||||
# For more info:
|
||||
# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
|
||||
|
||||
name=Adafruit SAMD (32-bits ARM Cortex-M0+ and Cortex-M4) Boards
|
||||
version=1.5.14
|
||||
|
||||
# Compile variables
|
||||
# -----------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall -Wno-expansion-to-defined
|
||||
compiler.warning_flags.all=-Wall -Wextra -Wno-expansion-to-defined
|
||||
|
||||
compiler.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD -D__SKETCH_NAME__="""{build.project_name}"""
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags=-Os -Wl,--gc-sections -save-temps
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp -MMD
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -D__SKETCH_NAME__="""{build.project_name}"""
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
compiler.objcopy.cmd=arm-none-eabi-objcopy
|
||||
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
|
||||
compiler.elf2hex.bin.flags=-O binary
|
||||
compiler.elf2hex.hex.flags=-O ihex -R .eeprom
|
||||
compiler.elf2hex.cmd=arm-none-eabi-objcopy
|
||||
compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align
|
||||
compiler.size.cmd=arm-none-eabi-size
|
||||
compiler.define=-DARDUINO=
|
||||
compiler.readelf.cmd=arm-none-eabi-readelf
|
||||
|
||||
# this can be overriden in boards.txt
|
||||
build.extra_flags=
|
||||
build.cache_flags=
|
||||
build.flags.optimize=
|
||||
build.flags.maxspi=
|
||||
build.flags.maxqspi=
|
||||
build.flags.usbstack=
|
||||
build.flags.debug=
|
||||
|
||||
# These can be overridden in platform.local.txt
|
||||
compiler.c.extra_flags=
|
||||
compiler.c.elf.extra_flags=
|
||||
#compiler.c.elf.extra_flags=-v
|
||||
compiler.cpp.extra_flags=
|
||||
compiler.S.extra_flags=
|
||||
compiler.ar.extra_flags=
|
||||
compiler.elf2hex.extra_flags=
|
||||
|
||||
compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.0.path}/CMSIS/Device/ATMEL/"
|
||||
compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math
|
||||
|
||||
compiler.libraries.ldflags=
|
||||
|
||||
# USB Flags
|
||||
# ---------
|
||||
build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON -DUSB_CONFIG_POWER={build.usb_power} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}' {build.flags.usbstack} {build.flags.debug} "-I{build.core.path}/TinyUSB" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src"
|
||||
|
||||
# Default advertised device power setting in mA
|
||||
build.usb_power=100
|
||||
|
||||
# Default usb manufacturer will be replaced at compile time using
|
||||
# numeric vendor ID if available or by board's specific value.
|
||||
build.usb_manufacturer="Unknown"
|
||||
|
||||
|
||||
# Compile patterns
|
||||
# ----------------
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile c++ files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile S files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Create archives
|
||||
# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
|
||||
archive_file_path={build.path}/{archive_file}
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Combine gc-sections, archives, and objects
|
||||
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} "-L{build.variant.path}" -lm "{build.path}/{archive_file}" -Wl,--end-group
|
||||
|
||||
## Create output (bin file)
|
||||
recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
|
||||
|
||||
## Create output (hex file)
|
||||
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
build.preferred_out_format=bin
|
||||
|
||||
## Save hex
|
||||
recipe.output.tmp_file={build.project_name}.{build.preferred_out_format}
|
||||
recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format}
|
||||
|
||||
## Compute size
|
||||
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
|
||||
recipe.size.regex=\.text\s+([0-9]+).*
|
||||
|
||||
#
|
||||
# BOSSA
|
||||
#
|
||||
tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossac.cmd=bossac
|
||||
tools.bossac.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossac.upload.params.verbose=-i -d
|
||||
tools.bossac.upload.params.quiet=
|
||||
tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossac.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossac.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
# v1.8.0
|
||||
|
||||
tools.bossac18.path={runtime.tools.bossac-1.8.0-48-gb176eee.path}
|
||||
tools.bossac18.cmd=bossac
|
||||
|
||||
tools.bossac18.upload.params.verbose=-i -d
|
||||
tools.bossac18.upload.params.quiet=
|
||||
tools.bossac18.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U -i --offset={upload.offset} -w -v "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac18.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossac18.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
#
|
||||
# BOSSA (ignore binary size)
|
||||
#
|
||||
tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossacI.cmd=bossac
|
||||
tools.bossacI.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossacI.upload.params.verbose=-i -d
|
||||
tools.bossacI.upload.params.quiet=
|
||||
tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossacI.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossacI.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload
|
||||
#
|
||||
|
||||
tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd.cmd=bin/openocd
|
||||
tools.openocd.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd.upload.params.verbose=-d2
|
||||
tools.openocd.upload.params.quiet=-d0
|
||||
tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown"
|
||||
|
||||
tools.openocd.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.openocd.upload.network_pattern={network_cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd.program.params.verbose=-d2
|
||||
tools.openocd.program.params.quiet=-d0
|
||||
tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd.erase.params.verbose=-d3
|
||||
tools.openocd.erase.params.quiet=-d0
|
||||
tools.openocd.erase.pattern=
|
||||
|
||||
tools.openocd.bootloader.params.verbose=-d2
|
||||
tools.openocd.bootloader.params.quiet=-d0
|
||||
tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload - version with configurable bootloader size
|
||||
# FIXME: this programmer is a workaround for default options being overwritten by uploadUsingPreferences
|
||||
#
|
||||
|
||||
tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd-withbootsize.cmd=bin/openocd
|
||||
tools.openocd-withbootsize.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd-withbootsize.upload.params.verbose=-d2
|
||||
tools.openocd-withbootsize.upload.params.quiet=-d0
|
||||
tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown"
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd-withbootsize.program.params.verbose=-d2
|
||||
tools.openocd-withbootsize.program.params.quiet=-d0
|
||||
tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd-withbootsize.erase.params.verbose=-d3
|
||||
tools.openocd-withbootsize.erase.params.quiet=-d0
|
||||
tools.openocd-withbootsize.erase.pattern=
|
||||
|
||||
tools.openocd-withbootsize.bootloader.params.verbose=-d2
|
||||
tools.openocd-withbootsize.bootloader.params.quiet=-d0
|
||||
tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
@@ -0,0 +1,232 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
# Arduino SAMD Core and platform.
|
||||
#
|
||||
# For more info:
|
||||
# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
|
||||
|
||||
name=Adafruit SAMD (32-bits ARM Cortex-M0+ and Cortex-M4) Boards
|
||||
version=1.6.0
|
||||
|
||||
# Compile variables
|
||||
# -----------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall -Wno-expansion-to-defined
|
||||
compiler.warning_flags.all=-Wall -Wextra -Wno-expansion-to-defined
|
||||
|
||||
compiler.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD -D__SKETCH_NAME__="""{build.project_name}"""
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags=-Os -Wl,--gc-sections -save-temps
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp -MMD
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -D__SKETCH_NAME__="""{build.project_name}"""
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
compiler.objcopy.cmd=arm-none-eabi-objcopy
|
||||
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
|
||||
compiler.elf2hex.bin.flags=-O binary
|
||||
compiler.elf2hex.hex.flags=-O ihex -R .eeprom
|
||||
compiler.elf2hex.cmd=arm-none-eabi-objcopy
|
||||
compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align
|
||||
compiler.size.cmd=arm-none-eabi-size
|
||||
compiler.define=-DARDUINO=
|
||||
compiler.readelf.cmd=arm-none-eabi-readelf
|
||||
|
||||
# this can be overriden in boards.txt
|
||||
build.extra_flags=
|
||||
build.cache_flags=
|
||||
build.flags.optimize=
|
||||
build.flags.maxspi=
|
||||
build.flags.maxqspi=
|
||||
build.flags.usbstack=
|
||||
build.flags.debug=
|
||||
|
||||
# These can be overridden in platform.local.txt
|
||||
compiler.c.extra_flags=
|
||||
compiler.c.elf.extra_flags=
|
||||
#compiler.c.elf.extra_flags=-v
|
||||
compiler.cpp.extra_flags=
|
||||
compiler.S.extra_flags=
|
||||
compiler.ar.extra_flags=
|
||||
compiler.elf2hex.extra_flags=
|
||||
|
||||
compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Core/Include/" "-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/DSP/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.0.path}/CMSIS/Device/ATMEL/"
|
||||
compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math
|
||||
|
||||
compiler.libraries.ldflags=
|
||||
|
||||
# USB Flags
|
||||
# ---------
|
||||
build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON -DUSB_CONFIG_POWER={build.usb_power} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}' {build.flags.usbstack} {build.flags.debug} "-I{build.core.path}/TinyUSB" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore" "-I{build.core.path}/TinyUSB/Adafruit_TinyUSB_ArduinoCore/tinyusb/src"
|
||||
|
||||
# Default advertised device power setting in mA
|
||||
build.usb_power=100
|
||||
|
||||
# Default usb manufacturer will be replaced at compile time using
|
||||
# numeric vendor ID if available or by board's specific value.
|
||||
build.usb_manufacturer="Unknown"
|
||||
|
||||
|
||||
# Compile patterns
|
||||
# ----------------
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Create archives
|
||||
# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
|
||||
archive_file_path={build.path}/{archive_file}
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Combine gc-sections, archives, and objects
|
||||
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} "-L{build.variant.path}" -lm "{build.path}/{archive_file}" -Wl,--end-group
|
||||
|
||||
## Create output (bin file)
|
||||
recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
|
||||
|
||||
## Create output (hex file)
|
||||
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
build.preferred_out_format=bin
|
||||
|
||||
## Save hex
|
||||
recipe.output.tmp_file={build.project_name}.{build.preferred_out_format}
|
||||
recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format}
|
||||
|
||||
## Compute size
|
||||
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
|
||||
recipe.size.regex=\.text\s+([0-9]+).*
|
||||
|
||||
#
|
||||
# BOSSA
|
||||
#
|
||||
tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossac.cmd=bossac
|
||||
tools.bossac.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossac.upload.params.verbose=-i -d
|
||||
tools.bossac.upload.params.quiet=
|
||||
tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossac.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossac.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
# v1.8.0
|
||||
|
||||
tools.bossac18.path={runtime.tools.bossac-1.8.0-48-gb176eee.path}
|
||||
tools.bossac18.cmd=bossac
|
||||
|
||||
tools.bossac18.upload.params.verbose=-i -d
|
||||
tools.bossac18.upload.params.quiet=
|
||||
tools.bossac18.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U -i --offset={upload.offset} -w -v "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac18.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossac18.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
#
|
||||
# BOSSA (ignore binary size)
|
||||
#
|
||||
tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossacI.cmd=bossac
|
||||
tools.bossacI.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossacI.upload.params.verbose=-i -d
|
||||
tools.bossacI.upload.params.quiet=
|
||||
tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossacI.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossacI.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload
|
||||
#
|
||||
|
||||
tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd.cmd=bin/openocd
|
||||
tools.openocd.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd.upload.params.verbose=-d2
|
||||
tools.openocd.upload.params.quiet=-d0
|
||||
tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown"
|
||||
|
||||
tools.openocd.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.openocd.upload.network_pattern={network_cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd.program.params.verbose=-d2
|
||||
tools.openocd.program.params.quiet=-d0
|
||||
tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd.erase.params.verbose=-d3
|
||||
tools.openocd.erase.params.quiet=-d0
|
||||
tools.openocd.erase.pattern=
|
||||
|
||||
tools.openocd.bootloader.params.verbose=-d2
|
||||
tools.openocd.bootloader.params.quiet=-d0
|
||||
tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload - version with configurable bootloader size
|
||||
# FIXME: this programmer is a workaround for default options being overwritten by uploadUsingPreferences
|
||||
#
|
||||
|
||||
tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd-withbootsize.cmd=bin/openocd
|
||||
tools.openocd-withbootsize.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd-withbootsize.upload.params.verbose=-d2
|
||||
tools.openocd-withbootsize.upload.params.quiet=-d0
|
||||
tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown"
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd-withbootsize.program.params.verbose=-d2
|
||||
tools.openocd-withbootsize.program.params.quiet=-d0
|
||||
tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd-withbootsize.erase.params.verbose=-d3
|
||||
tools.openocd-withbootsize.erase.params.quiet=-d0
|
||||
tools.openocd-withbootsize.erase.pattern=
|
||||
|
||||
tools.openocd-withbootsize.bootloader.params.verbose=-d2
|
||||
tools.openocd-withbootsize.bootloader.params.quiet=-d0
|
||||
tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
@@ -0,0 +1,110 @@
|
||||
|
||||
# Arduino SAM Core and platform.
|
||||
# ------------------------------
|
||||
#
|
||||
# For more info:
|
||||
# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5-3rd-party-Hardware-specification
|
||||
|
||||
name=Arduino ARM (32-bits) Boards
|
||||
version=1.6.12
|
||||
|
||||
# SAM3 compile variables
|
||||
# ----------------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall
|
||||
compiler.warning_flags.all=-Wall -Wextra
|
||||
|
||||
compiler.path={runtime.tools.arm-none-eabi-gcc-4.8.3-2014q1.path}/bin/
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -MMD
|
||||
# KH, Error here to use gcc, mjust use g++
|
||||
#compiler.c.elf.cmd=arm-none-eabi-gcc
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags=-Os -Wl,--gc-sections
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp -MMD
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-c -g -Os {compiler.warning_flags} -std=gnu++11 -ffunction-sections -fdata-sections -nostdlib -fno-threadsafe-statics --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
compiler.objcopy.cmd=arm-none-eabi-objcopy
|
||||
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
|
||||
compiler.elf2hex.flags=-O binary
|
||||
compiler.elf2hex.cmd=arm-none-eabi-objcopy
|
||||
compiler.ldflags=
|
||||
compiler.size.cmd=arm-none-eabi-size
|
||||
compiler.define=-DARDUINO=
|
||||
compiler.combine.flags=-u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
|
||||
|
||||
# This can be overridden in boards.txt
|
||||
build.extra_flags=
|
||||
|
||||
# These can be overridden in platform.local.txt
|
||||
compiler.c.extra_flags=
|
||||
compiler.c.elf.extra_flags=
|
||||
compiler.cpp.extra_flags=
|
||||
compiler.S.extra_flags=
|
||||
compiler.ar.extra_flags=
|
||||
compiler.elf2hex.extra_flags=
|
||||
|
||||
|
||||
compiler.libsam.c.flags="-I{build.system.path}/libsam" "-I{build.system.path}/CMSIS/CMSIS/Include/" "-I{build.system.path}/CMSIS/Device/ATMEL/"
|
||||
|
||||
# USB Flags
|
||||
# ---------
|
||||
build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
|
||||
|
||||
# Default usb manufacturer will be replaced at compile time using
|
||||
# numeric vendor ID if available or by board's specific value.
|
||||
build.usb_manufacturer="Unknown"
|
||||
|
||||
|
||||
# SAM3 compile patterns
|
||||
# ---------------------
|
||||
|
||||
## Compile c files
|
||||
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -mcpu={build.mcu} -mthumb -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {compiler.libsam.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile c++ files
|
||||
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -mcpu={build.mcu} -mthumb -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {compiler.libsam.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile S files
|
||||
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -mcpu={build.mcu} -mthumb -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {compiler.libsam.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Create archives
|
||||
# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
|
||||
archive_file_path={build.path}/{archive_file}
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Combine gc-sections, archives, and objects
|
||||
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" -mcpu={build.mcu} -mthumb {compiler.c.elf.flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" {compiler.c.elf.extra_flags} -o "{build.path}/{build.project_name}.elf" "-L{build.path}" -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--entry=Reset_Handler -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align -Wl,--start-group {compiler.combine.flags} {object_files} "{build.variant.path}/{build.variant_system_lib}" "{build.path}/{archive_file}" -Wl,--end-group -lm -lgcc
|
||||
|
||||
## Create output (.bin file)
|
||||
recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
|
||||
|
||||
## Save hex
|
||||
recipe.output.tmp_file={build.project_name}.bin
|
||||
recipe.output.save_file={build.project_name}.{build.variant}.bin
|
||||
|
||||
## Compute size
|
||||
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
|
||||
recipe.size.regex=\.text\s+([0-9]+).*
|
||||
|
||||
|
||||
# SAM3 Uploader tools
|
||||
# -------------------
|
||||
|
||||
# BOSSA
|
||||
tools.bossac.path={runtime.tools.bossac.path}
|
||||
tools.bossac.cmd=bossac
|
||||
tools.bossac.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossac.upload.params.verbose=-i -d
|
||||
tools.bossac.upload.params.quiet=
|
||||
tools.bossac.upload.params.verify=-v
|
||||
tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -e -w {upload.verify} -b "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v -b /tmp/sketch.bin -R
|
||||
@@ -0,0 +1,160 @@
|
||||
/*
|
||||
Arduino.h - Main include file for the Arduino SDK
|
||||
Copyright (c) 2014 Arduino LLC. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// KH, This is the fix according to https://github.com/arduino/ArduinoCore-samd/pull/399
|
||||
// to avoid notorious compiler error while uing STL (min and max macro error)
|
||||
// It's terrible Arduino has just released new core and still don't merge the PR
|
||||
|
||||
#ifndef Arduino_h
|
||||
#define Arduino_h
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
#include <math.h>
|
||||
|
||||
typedef bool boolean;
|
||||
typedef uint8_t byte;
|
||||
typedef uint16_t word;
|
||||
|
||||
// some libraries and sketches depend on this AVR stuff,
|
||||
// assuming Arduino.h or WProgram.h automatically includes it...
|
||||
//
|
||||
#include "avr/pgmspace.h"
|
||||
#include "avr/interrupt.h"
|
||||
#include "avr/io.h"
|
||||
#include "binary.h"
|
||||
#include "itoa.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"{
|
||||
#endif // __cplusplus
|
||||
|
||||
// Include Atmel headers
|
||||
#include "sam.h"
|
||||
#include "wiring_constants.h"
|
||||
|
||||
#define clockCyclesPerMicrosecond() ( SystemCoreClock / 1000000L )
|
||||
#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (SystemCoreClock / 1000L) )
|
||||
#define microsecondsToClockCycles(a) ( (a) * (SystemCoreClock / 1000000L) )
|
||||
void yield( void ) ;
|
||||
/* system functions */
|
||||
int main( void );
|
||||
void init( void );
|
||||
/* sketch */
|
||||
void setup( void ) ;
|
||||
void loop( void ) ;
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
|
||||
|
||||
// The following headers are for C++ only compilation
|
||||
#ifdef __cplusplus
|
||||
#include "WCharacter.h"
|
||||
#include "WString.h"
|
||||
#include "Tone.h"
|
||||
#include "WMath.h"
|
||||
#include "HardwareSerial.h"
|
||||
#include "pulse.h"
|
||||
#include <bits/stl_algobase.h>
|
||||
#endif
|
||||
|
||||
#include "delay.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
#include "Uart.h"
|
||||
#endif
|
||||
|
||||
// Include board variant
|
||||
#include "variant.h"
|
||||
#include "wiring.h"
|
||||
#include "wiring_digital.h"
|
||||
#include "wiring_analog.h"
|
||||
#include "wiring_shift.h"
|
||||
#include "WInterrupts.h"
|
||||
|
||||
#ifndef __cplusplus
|
||||
// undefine stdlib's abs if encountered
|
||||
#ifdef abs
|
||||
#undef abs
|
||||
#endif // abs
|
||||
|
||||
#define min(a,b) ((a)<(b)?(a):(b))
|
||||
#define max(a,b) ((a)>(b)?(a):(b))
|
||||
#define abs(x) ((x)>0?(x):-(x))
|
||||
#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
|
||||
|
||||
#else
|
||||
//using std::min;
|
||||
//using std::max;
|
||||
template<class T, class L>
|
||||
auto min(const T& a, const L& b) -> decltype((b < a) ? b : a)
|
||||
{
|
||||
return (b < a) ? b : a;
|
||||
}
|
||||
|
||||
template<class T, class L>
|
||||
auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
|
||||
{
|
||||
return (a < b) ? b : a;
|
||||
}
|
||||
#endif
|
||||
|
||||
#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
|
||||
#define radians(deg) ((deg)*DEG_TO_RAD)
|
||||
#define degrees(rad) ((rad)*RAD_TO_DEG)
|
||||
#define sq(x) ((x)*(x))
|
||||
|
||||
#define interrupts() __enable_irq()
|
||||
#define noInterrupts() __disable_irq()
|
||||
|
||||
#define lowByte(w) ((uint8_t) ((w) & 0xff))
|
||||
#define highByte(w) ((uint8_t) ((w) >> 8))
|
||||
|
||||
#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
|
||||
#define bitSet(value, bit) ((value) |= (1UL << (bit)))
|
||||
#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
|
||||
#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
|
||||
#define bit(b) (1UL << (b))
|
||||
|
||||
#if (ARDUINO_SAMD_VARIANT_COMPLIANCE >= 10606)
|
||||
// Interrupts
|
||||
#define digitalPinToInterrupt(P) ( P )
|
||||
#endif
|
||||
|
||||
// Allows publishing the Beta core under samd-beta / arduino organization
|
||||
#ifndef ARDUINO_ARCH_SAMD
|
||||
#define ARDUINO_ARCH_SAMD
|
||||
#endif
|
||||
|
||||
// USB Device
|
||||
#include "USB/USBDesc.h"
|
||||
#include "USB/USBCore.h"
|
||||
#include "USB/USBAPI.h"
|
||||
#include "USB/USB_host.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
#include "USB/CDC.h"
|
||||
#endif
|
||||
|
||||
#endif // Arduino_h
|
||||
@@ -0,0 +1,248 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
# Arduino SAMD Core and platform.
|
||||
#
|
||||
# For more info:
|
||||
# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
|
||||
|
||||
name=Arduino SAMD (32-bits ARM Cortex-M0+) Boards
|
||||
version=1.8.6
|
||||
|
||||
# Compile variables
|
||||
# -----------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall -Wno-expansion-to-defined
|
||||
compiler.warning_flags.all=-Wall -Wextra -Wno-expansion-to-defined
|
||||
|
||||
# EXPERIMENTAL feature: optimization flags
|
||||
# - this is alpha and may be subject to change without notice
|
||||
compiler.optimization_flags=-Os
|
||||
compiler.optimization_flags.release=-Os
|
||||
compiler.optimization_flags.debug=-Og -g3
|
||||
|
||||
compiler.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.optimization_flags} {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags={compiler.optimization_flags} -Wl,--gc-sections -save-temps
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp -MMD
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.optimization_flags} {compiler.warning_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
compiler.objcopy.cmd=arm-none-eabi-objcopy
|
||||
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
|
||||
compiler.elf2hex.bin.flags=-O binary
|
||||
compiler.elf2hex.hex.flags=-O ihex -R .eeprom
|
||||
compiler.elf2hex.cmd=arm-none-eabi-objcopy
|
||||
compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align
|
||||
compiler.size.cmd=arm-none-eabi-size
|
||||
compiler.define=-DARDUINO=
|
||||
compiler.readelf.cmd=arm-none-eabi-readelf
|
||||
|
||||
# this can be overriden in boards.txt
|
||||
build.extra_flags=
|
||||
|
||||
# These can be overridden in platform.local.txt
|
||||
compiler.c.extra_flags=
|
||||
compiler.c.elf.extra_flags=
|
||||
#compiler.c.elf.extra_flags=-v
|
||||
compiler.cpp.extra_flags=
|
||||
compiler.S.extra_flags=
|
||||
compiler.ar.extra_flags=
|
||||
compiler.elf2hex.extra_flags=
|
||||
|
||||
compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.0.path}/CMSIS/Device/ATMEL/"
|
||||
compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math
|
||||
|
||||
compiler.libraries.ldflags=
|
||||
|
||||
# USB Flags
|
||||
# ---------
|
||||
build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
|
||||
|
||||
# Default usb manufacturer will be replaced at compile time using
|
||||
# numeric vendor ID if available or by board's specific value.
|
||||
build.usb_manufacturer="Unknown"
|
||||
|
||||
# Compile patterns
|
||||
# ----------------
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile c++ files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile S files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Create archives
|
||||
# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
|
||||
archive_file_path={build.path}/{archive_file}
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Combine gc-sections, archives, and objects
|
||||
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} -lm "{build.path}/{archive_file}" -Wl,--end-group
|
||||
|
||||
## Create output (bin file)
|
||||
recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
|
||||
|
||||
## Create output (hex file)
|
||||
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
build.preferred_out_format=bin
|
||||
|
||||
## Save hex
|
||||
recipe.output.tmp_file={build.project_name}.{build.preferred_out_format}
|
||||
recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format}
|
||||
|
||||
## Compute size
|
||||
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
|
||||
recipe.size.regex=^(?:\.text|\.data|)\s+([0-9]+).*
|
||||
recipe.size.regex.data=^(?:\.data|\.bss)\s+([0-9]+).*
|
||||
|
||||
# Upload/Debug tools
|
||||
# ------------------
|
||||
|
||||
#
|
||||
# AVRDUDE
|
||||
#
|
||||
tools.avrdude.path={runtime.tools.avrdude.path}
|
||||
tools.avrdude.cmd={path}/bin/avrdude
|
||||
tools.avrdude.config.path={path}/etc/avrdude.conf
|
||||
|
||||
tools.avrdude.upload.params.verbose=-v -v
|
||||
tools.avrdude.upload.params.quiet=-q -q
|
||||
tools.avrdude.upload.params.noverify=-V
|
||||
tools.avrdude.upload.pattern="{cmd}" "-C{config.path}" {upload.verbose} -p{build.emu.mcu} -c{upload.protocol} -P{serial.port} -b{upload.speed} "-Uflash:w:{build.path}/{build.project_name}.hex:i"
|
||||
|
||||
tools.avrdude_remote.upload.pattern="openocd --version 2>&1 | grep 2016 && if opkg update; then opkg upgrade openocd; exit 1; else echo 'Please connect your board to the Internet in order to upgrade tools' >&2; exit 1; fi || /usr/bin/run-avrdude /tmp/sketch.hex"
|
||||
|
||||
tools.avrdude.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.avrdude.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
#
|
||||
# BOSSA
|
||||
#
|
||||
tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossac.cmd=bossac
|
||||
tools.bossac.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossac.upload.params.verbose=-i -d
|
||||
tools.bossac.upload.params.quiet=
|
||||
tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossac.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossac.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
#
|
||||
# BOSSA (ignore binary size)
|
||||
#
|
||||
tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossacI.cmd=bossac
|
||||
tools.bossacI.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossacI.upload.params.verbose=-i -d
|
||||
tools.bossacI.upload.params.quiet=
|
||||
tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossacI.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossacI.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload
|
||||
#
|
||||
|
||||
tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd.cmd=bin/openocd
|
||||
tools.openocd.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd.upload.params.verbose=-d2
|
||||
tools.openocd.upload.params.quiet=-d0
|
||||
tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown"
|
||||
|
||||
tools.openocd.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.openocd.upload.network_pattern={network_cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd.program.params.verbose=-d2
|
||||
tools.openocd.program.params.quiet=-d0
|
||||
tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd.erase.params.verbose=-d3
|
||||
tools.openocd.erase.params.quiet=-d0
|
||||
tools.openocd.erase.pattern=
|
||||
|
||||
tools.openocd.bootloader.params.verbose=-d2
|
||||
tools.openocd.bootloader.params.quiet=-d0
|
||||
tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload - version with configurable bootloader size
|
||||
# FIXME: this programmer is a workaround for default options being overwritten by uploadUsingPreferences
|
||||
#
|
||||
|
||||
tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd-withbootsize.cmd=bin/openocd
|
||||
tools.openocd-withbootsize.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd-withbootsize.upload.params.verbose=-d2
|
||||
tools.openocd-withbootsize.upload.params.quiet=-d0
|
||||
tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown"
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd-withbootsize.program.params.verbose=-d2
|
||||
tools.openocd-withbootsize.program.params.quiet=-d0
|
||||
tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd-withbootsize.erase.params.verbose=-d3
|
||||
tools.openocd-withbootsize.erase.params.quiet=-d0
|
||||
tools.openocd-withbootsize.erase.pattern=
|
||||
|
||||
tools.openocd-withbootsize.bootloader.params.verbose=-d2
|
||||
tools.openocd-withbootsize.bootloader.params.quiet=-d0
|
||||
tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
|
||||
#
|
||||
# GDB (Debugger)
|
||||
#
|
||||
# EXPERIMENTAL feature: debug.pattern
|
||||
# - this is alpha and may be subject to change without notice
|
||||
|
||||
tools.gdb.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
|
||||
tools.gdb.cmd=arm-none-eabi-gdb
|
||||
tools.gdb.cmd.windows=arm-none-eabi-gdb.exe
|
||||
tools.gdb.debug.pattern="{path}/{cmd}" --interpreter=mi2 -ex "set pagination off" -ex 'target extended-remote | {tools.openocd.path}/{tools.openocd.cmd} -s "{tools.openocd.path}/share/openocd/scripts/" --file "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "gdb_port pipe" -c "telnet_port 0"' {build.path}/{build.project_name}.elf
|
||||
@@ -0,0 +1,160 @@
|
||||
/*
|
||||
Arduino.h - Main include file for the Arduino SDK
|
||||
Copyright (c) 2014 Arduino LLC. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// KH, This is the fix according to https://github.com/arduino/ArduinoCore-samd/pull/399
|
||||
// to avoid notorious compiler error while uing STL (min and max macro error)
|
||||
// It's terrible Arduino has just released new core and still don't merge the PR
|
||||
|
||||
#ifndef Arduino_h
|
||||
#define Arduino_h
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
#include <math.h>
|
||||
|
||||
typedef bool boolean;
|
||||
typedef uint8_t byte;
|
||||
typedef uint16_t word;
|
||||
|
||||
// some libraries and sketches depend on this AVR stuff,
|
||||
// assuming Arduino.h or WProgram.h automatically includes it...
|
||||
//
|
||||
#include "avr/pgmspace.h"
|
||||
#include "avr/interrupt.h"
|
||||
#include "avr/io.h"
|
||||
#include "binary.h"
|
||||
#include "itoa.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"{
|
||||
#endif // __cplusplus
|
||||
|
||||
// Include Atmel headers
|
||||
#include "sam.h"
|
||||
#include "wiring_constants.h"
|
||||
|
||||
#define clockCyclesPerMicrosecond() ( SystemCoreClock / 1000000L )
|
||||
#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (SystemCoreClock / 1000L) )
|
||||
#define microsecondsToClockCycles(a) ( (a) * (SystemCoreClock / 1000000L) )
|
||||
void yield( void ) ;
|
||||
/* system functions */
|
||||
int main( void );
|
||||
void init( void );
|
||||
/* sketch */
|
||||
void setup( void ) ;
|
||||
void loop( void ) ;
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
|
||||
|
||||
// The following headers are for C++ only compilation
|
||||
#ifdef __cplusplus
|
||||
#include "WCharacter.h"
|
||||
#include "WString.h"
|
||||
#include "Tone.h"
|
||||
#include "WMath.h"
|
||||
#include "HardwareSerial.h"
|
||||
#include "pulse.h"
|
||||
#include <bits/stl_algobase.h>
|
||||
#endif
|
||||
|
||||
#include "delay.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
#include "Uart.h"
|
||||
#endif
|
||||
|
||||
// Include board variant
|
||||
#include "variant.h"
|
||||
#include "wiring.h"
|
||||
#include "wiring_digital.h"
|
||||
#include "wiring_analog.h"
|
||||
#include "wiring_shift.h"
|
||||
#include "WInterrupts.h"
|
||||
|
||||
#ifndef __cplusplus
|
||||
// undefine stdlib's abs if encountered
|
||||
#ifdef abs
|
||||
#undef abs
|
||||
#endif // abs
|
||||
|
||||
#define min(a,b) ((a)<(b)?(a):(b))
|
||||
#define max(a,b) ((a)>(b)?(a):(b))
|
||||
#define abs(x) ((x)>0?(x):-(x))
|
||||
#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
|
||||
|
||||
#else
|
||||
//using std::min;
|
||||
//using std::max;
|
||||
template<class T, class L>
|
||||
auto min(const T& a, const L& b) -> decltype((b < a) ? b : a)
|
||||
{
|
||||
return (b < a) ? b : a;
|
||||
}
|
||||
|
||||
template<class T, class L>
|
||||
auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
|
||||
{
|
||||
return (a < b) ? b : a;
|
||||
}
|
||||
#endif
|
||||
|
||||
#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
|
||||
#define radians(deg) ((deg)*DEG_TO_RAD)
|
||||
#define degrees(rad) ((rad)*RAD_TO_DEG)
|
||||
#define sq(x) ((x)*(x))
|
||||
|
||||
#define interrupts() __enable_irq()
|
||||
#define noInterrupts() __disable_irq()
|
||||
|
||||
#define lowByte(w) ((uint8_t) ((w) & 0xff))
|
||||
#define highByte(w) ((uint8_t) ((w) >> 8))
|
||||
|
||||
#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
|
||||
#define bitSet(value, bit) ((value) |= (1UL << (bit)))
|
||||
#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
|
||||
#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
|
||||
#define bit(b) (1UL << (b))
|
||||
|
||||
#if (ARDUINO_SAMD_VARIANT_COMPLIANCE >= 10606)
|
||||
// Interrupts
|
||||
#define digitalPinToInterrupt(P) ( P )
|
||||
#endif
|
||||
|
||||
// Allows publishing the Beta core under samd-beta / arduino organization
|
||||
#ifndef ARDUINO_ARCH_SAMD
|
||||
#define ARDUINO_ARCH_SAMD
|
||||
#endif
|
||||
|
||||
// USB Device
|
||||
#include "USB/USBDesc.h"
|
||||
#include "USB/USBCore.h"
|
||||
#include "USB/USBAPI.h"
|
||||
#include "USB/USB_host.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
#include "USB/CDC.h"
|
||||
#endif
|
||||
|
||||
#endif // Arduino_h
|
||||
@@ -0,0 +1,248 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
# Arduino SAMD Core and platform.
|
||||
#
|
||||
# For more info:
|
||||
# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
|
||||
|
||||
name=Arduino SAMD (32-bits ARM Cortex-M0+) Boards
|
||||
version=1.8.7
|
||||
|
||||
# Compile variables
|
||||
# -----------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall -Wno-expansion-to-defined
|
||||
compiler.warning_flags.all=-Wall -Wextra -Wno-expansion-to-defined
|
||||
|
||||
# EXPERIMENTAL feature: optimization flags
|
||||
# - this is alpha and may be subject to change without notice
|
||||
compiler.optimization_flags=-Os
|
||||
compiler.optimization_flags.release=-Os
|
||||
compiler.optimization_flags.debug=-Og -g3
|
||||
|
||||
compiler.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.optimization_flags} {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags={compiler.optimization_flags} -Wl,--gc-sections -save-temps
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp -MMD
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.optimization_flags} {compiler.warning_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
compiler.objcopy.cmd=arm-none-eabi-objcopy
|
||||
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
|
||||
compiler.elf2hex.bin.flags=-O binary
|
||||
compiler.elf2hex.hex.flags=-O ihex -R .eeprom
|
||||
compiler.elf2hex.cmd=arm-none-eabi-objcopy
|
||||
compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align
|
||||
compiler.size.cmd=arm-none-eabi-size
|
||||
compiler.define=-DARDUINO=
|
||||
compiler.readelf.cmd=arm-none-eabi-readelf
|
||||
|
||||
# this can be overriden in boards.txt
|
||||
build.extra_flags=
|
||||
|
||||
# These can be overridden in platform.local.txt
|
||||
compiler.c.extra_flags=
|
||||
compiler.c.elf.extra_flags=
|
||||
#compiler.c.elf.extra_flags=-v
|
||||
compiler.cpp.extra_flags=
|
||||
compiler.S.extra_flags=
|
||||
compiler.ar.extra_flags=
|
||||
compiler.elf2hex.extra_flags=
|
||||
|
||||
compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.0.path}/CMSIS/Device/ATMEL/"
|
||||
compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math
|
||||
|
||||
compiler.libraries.ldflags=
|
||||
|
||||
# USB Flags
|
||||
# ---------
|
||||
build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
|
||||
|
||||
# Default usb manufacturer will be replaced at compile time using
|
||||
# numeric vendor ID if available or by board's specific value.
|
||||
build.usb_manufacturer="Unknown"
|
||||
|
||||
# Compile patterns
|
||||
# ----------------
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile c++ files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile S files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Create archives
|
||||
# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
|
||||
archive_file_path={build.path}/{archive_file}
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Combine gc-sections, archives, and objects
|
||||
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} -lm "{build.path}/{archive_file}" -Wl,--end-group
|
||||
|
||||
## Create output (bin file)
|
||||
recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
|
||||
|
||||
## Create output (hex file)
|
||||
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
build.preferred_out_format=bin
|
||||
|
||||
## Save hex
|
||||
recipe.output.tmp_file={build.project_name}.{build.preferred_out_format}
|
||||
recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format}
|
||||
|
||||
## Compute size
|
||||
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
|
||||
recipe.size.regex=^(?:\.text|\.data|)\s+([0-9]+).*
|
||||
recipe.size.regex.data=^(?:\.data|\.bss)\s+([0-9]+).*
|
||||
|
||||
# Upload/Debug tools
|
||||
# ------------------
|
||||
|
||||
#
|
||||
# AVRDUDE
|
||||
#
|
||||
tools.avrdude.path={runtime.tools.avrdude.path}
|
||||
tools.avrdude.cmd={path}/bin/avrdude
|
||||
tools.avrdude.config.path={path}/etc/avrdude.conf
|
||||
|
||||
tools.avrdude.upload.params.verbose=-v -v
|
||||
tools.avrdude.upload.params.quiet=-q -q
|
||||
tools.avrdude.upload.params.noverify=-V
|
||||
tools.avrdude.upload.pattern="{cmd}" "-C{config.path}" {upload.verbose} -p{build.emu.mcu} -c{upload.protocol} -P{serial.port} -b{upload.speed} "-Uflash:w:{build.path}/{build.project_name}.hex:i"
|
||||
|
||||
tools.avrdude_remote.upload.pattern="openocd --version 2>&1 | grep 2016 && if opkg update; then opkg upgrade openocd; exit 1; else echo 'Please connect your board to the Internet in order to upgrade tools' >&2; exit 1; fi || /usr/bin/run-avrdude /tmp/sketch.hex"
|
||||
|
||||
tools.avrdude.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.avrdude.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
#
|
||||
# BOSSA
|
||||
#
|
||||
tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossac.cmd=bossac
|
||||
tools.bossac.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossac.upload.params.verbose=-i -d
|
||||
tools.bossac.upload.params.quiet=
|
||||
tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
arduinoota.extraflags=
|
||||
tools.bossac.network_cmd={runtime.tools.arduinoOTA-1.3.0.path}/bin/arduinoOTA
|
||||
tools.bossac.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b {arduinoota.extraflags}
|
||||
|
||||
#
|
||||
# BOSSA (ignore binary size)
|
||||
#
|
||||
tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossacI.cmd=bossac
|
||||
tools.bossacI.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossacI.upload.params.verbose=-i -d
|
||||
tools.bossacI.upload.params.quiet=
|
||||
tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossacI.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossacI.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload
|
||||
#
|
||||
|
||||
tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd.cmd=bin/openocd
|
||||
tools.openocd.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd.upload.params.verbose=-d2
|
||||
tools.openocd.upload.params.quiet=-d0
|
||||
tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown"
|
||||
|
||||
tools.openocd.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.openocd.upload.network_pattern={network_cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
tools.openocd.program.params.verbose=-d2
|
||||
tools.openocd.program.params.quiet=-d0
|
||||
tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.hex} verify reset; shutdown"
|
||||
|
||||
tools.openocd.erase.params.verbose=-d3
|
||||
tools.openocd.erase.params.quiet=-d0
|
||||
tools.openocd.erase.pattern=
|
||||
|
||||
tools.openocd.bootloader.params.verbose=-d2
|
||||
tools.openocd.bootloader.params.quiet=-d0
|
||||
tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload - version with configurable bootloader size
|
||||
# FIXME: this programmer is a workaround for default options being overwritten by uploadUsingPreferences
|
||||
#
|
||||
|
||||
tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd-withbootsize.cmd=bin/openocd
|
||||
tools.openocd-withbootsize.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd-withbootsize.upload.params.verbose=-d2
|
||||
tools.openocd-withbootsize.upload.params.quiet=-d0
|
||||
tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown"
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd-withbootsize.program.params.verbose=-d2
|
||||
tools.openocd-withbootsize.program.params.quiet=-d0
|
||||
tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd-withbootsize.erase.params.verbose=-d3
|
||||
tools.openocd-withbootsize.erase.params.quiet=-d0
|
||||
tools.openocd-withbootsize.erase.pattern=
|
||||
|
||||
tools.openocd-withbootsize.bootloader.params.verbose=-d2
|
||||
tools.openocd-withbootsize.bootloader.params.quiet=-d0
|
||||
tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
|
||||
#
|
||||
# GDB (Debugger)
|
||||
#
|
||||
# EXPERIMENTAL feature: debug.pattern
|
||||
# - this is alpha and may be subject to change without notice
|
||||
tools.gdb-openocd.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
|
||||
tools.gdb-openocd.cmd=arm-none-eabi-gdb
|
||||
tools.gdb-openocd.cmd.windows=arm-none-eabi-gdb.exe
|
||||
tools.gdb-openocd.interpreter=console
|
||||
tools.gdb-openocd.debug.pattern="{path}/{cmd}" --interpreter={interpreter} -ex "set remotetimeout 5" -ex "set pagination off" -ex 'target extended-remote | "{tools.openocd.path}/{tools.openocd.cmd}" -s "{tools.openocd.path}/share/openocd/scripts/" --file "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "gdb_port pipe" -c "telnet_port 0"' "{build.path}/{build.project_name}.elf"
|
||||
@@ -0,0 +1,165 @@
|
||||
/*
|
||||
Arduino.h - Main include file for the Arduino SDK
|
||||
Copyright (c) 2014 Arduino LLC. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
// KH, This is the fix according to https://github.com/arduino/ArduinoCore-samd/pull/399
|
||||
// to avoid notorious compiler error while uing STL (min and max macro error)
|
||||
// It's terrible Arduino has just released new core and still don't merge the PR
|
||||
|
||||
#ifndef Arduino_h
|
||||
#define Arduino_h
|
||||
|
||||
#include <stdbool.h>
|
||||
#include <stdint.h>
|
||||
#include <stdlib.h>
|
||||
#include <string.h>
|
||||
#include <math.h>
|
||||
|
||||
typedef bool boolean;
|
||||
typedef uint8_t byte;
|
||||
typedef uint16_t word;
|
||||
|
||||
// some libraries and sketches depend on this AVR stuff,
|
||||
// assuming Arduino.h or WProgram.h automatically includes it...
|
||||
//
|
||||
#include "avr/pgmspace.h"
|
||||
#include "avr/interrupt.h"
|
||||
#include "avr/io.h"
|
||||
|
||||
#include "binary.h"
|
||||
#include "itoa.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C"{
|
||||
#endif // __cplusplus
|
||||
|
||||
// Include Atmel headers
|
||||
#include "sam.h"
|
||||
|
||||
#include "wiring_constants.h"
|
||||
|
||||
#define clockCyclesPerMicrosecond() ( SystemCoreClock / 1000000L )
|
||||
#define clockCyclesToMicroseconds(a) ( ((a) * 1000L) / (SystemCoreClock / 1000L) )
|
||||
#define microsecondsToClockCycles(a) ( (a) * (SystemCoreClock / 1000000L) )
|
||||
|
||||
void yield( void ) ;
|
||||
|
||||
/* system functions */
|
||||
int main( void );
|
||||
void init( void );
|
||||
|
||||
/* sketch */
|
||||
void setup( void ) ;
|
||||
void loop( void ) ;
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
|
||||
// The following headers are for C++ only compilation
|
||||
#ifdef __cplusplus
|
||||
#include "WCharacter.h"
|
||||
#include "WString.h"
|
||||
#include "Tone.h"
|
||||
#include "WMath.h"
|
||||
#include "HardwareSerial.h"
|
||||
#include "pulse.h"
|
||||
#include <bits/stl_algobase.h>
|
||||
#endif
|
||||
|
||||
#include "delay.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
#include "Uart.h"
|
||||
#endif
|
||||
|
||||
// Include board variant
|
||||
#include "variant.h"
|
||||
#include "wiring.h"
|
||||
#include "wiring_digital.h"
|
||||
#include "wiring_analog.h"
|
||||
#include "wiring_shift.h"
|
||||
#include "WInterrupts.h"
|
||||
|
||||
#ifndef __cplusplus
|
||||
// undefine stdlib's abs if encountered
|
||||
#ifdef abs
|
||||
#undef abs
|
||||
#endif // abs
|
||||
|
||||
#define min(a,b) ((a)<(b)?(a):(b))
|
||||
#define max(a,b) ((a)>(b)?(a):(b))
|
||||
#define abs(x) ((x)>0?(x):-(x))
|
||||
#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5))
|
||||
|
||||
#else
|
||||
//using std::min;
|
||||
//using std::max;
|
||||
template<class T, class L>
|
||||
auto min(const T& a, const L& b) -> decltype((b < a) ? b : a)
|
||||
{
|
||||
return (b < a) ? b : a;
|
||||
}
|
||||
|
||||
template<class T, class L>
|
||||
auto max(const T& a, const L& b) -> decltype((b < a) ? b : a)
|
||||
{
|
||||
return (a < b) ? b : a;
|
||||
}
|
||||
#endif
|
||||
|
||||
#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
|
||||
#define radians(deg) ((deg)*DEG_TO_RAD)
|
||||
#define degrees(rad) ((rad)*RAD_TO_DEG)
|
||||
#define sq(x) ((x)*(x))
|
||||
|
||||
#define interrupts() __enable_irq()
|
||||
#define noInterrupts() __disable_irq()
|
||||
|
||||
#define lowByte(w) ((uint8_t) ((w) & 0xff))
|
||||
#define highByte(w) ((uint8_t) ((w) >> 8))
|
||||
|
||||
#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
|
||||
#define bitSet(value, bit) ((value) |= (1UL << (bit)))
|
||||
#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
|
||||
#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
|
||||
#define bit(b) (1UL << (b))
|
||||
|
||||
#if (ARDUINO_SAMD_VARIANT_COMPLIANCE >= 10606)
|
||||
// Interrupts
|
||||
#define digitalPinToInterrupt(P) ( P )
|
||||
#endif
|
||||
|
||||
// Allows publishing the Beta core under samd-beta / arduino organization
|
||||
#ifndef ARDUINO_ARCH_SAMD
|
||||
#define ARDUINO_ARCH_SAMD
|
||||
#endif
|
||||
|
||||
// USB Device
|
||||
#include "USB/USBDesc.h"
|
||||
#include "USB/USBCore.h"
|
||||
#include "USB/USBAPI.h"
|
||||
#include "USB/USB_host.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
#include "USB/CDC.h"
|
||||
#endif
|
||||
|
||||
#endif // Arduino_h
|
||||
@@ -0,0 +1,248 @@
|
||||
# Copyright (c) 2014-2015 Arduino LLC. All right reserved.
|
||||
#
|
||||
# This library is free software; you can redistribute it and/or
|
||||
# modify it under the terms of the GNU Lesser General Public
|
||||
# License as published by the Free Software Foundation; either
|
||||
# version 2.1 of the License, or (at your option) any later version.
|
||||
#
|
||||
# This library is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
# See the GNU Lesser General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU Lesser General Public
|
||||
# License along with this library; if not, write to the Free Software
|
||||
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
|
||||
# Arduino SAMD Core and platform.
|
||||
#
|
||||
# For more info:
|
||||
# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
|
||||
|
||||
name=Arduino SAMD (32-bits ARM Cortex-M0+) Boards
|
||||
version=1.8.8
|
||||
|
||||
# Compile variables
|
||||
# -----------------
|
||||
|
||||
compiler.warning_flags=-w
|
||||
compiler.warning_flags.none=-w
|
||||
compiler.warning_flags.default=
|
||||
compiler.warning_flags.more=-Wall -Wno-expansion-to-defined
|
||||
compiler.warning_flags.all=-Wall -Wextra -Wno-expansion-to-defined
|
||||
|
||||
# EXPERIMENTAL feature: optimization flags
|
||||
# - this is alpha and may be subject to change without notice
|
||||
compiler.optimization_flags=-Os
|
||||
compiler.optimization_flags.release=-Os
|
||||
compiler.optimization_flags.debug=-Og -g3
|
||||
|
||||
compiler.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
|
||||
compiler.c.cmd=arm-none-eabi-gcc
|
||||
compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.optimization_flags} {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
|
||||
compiler.c.elf.cmd=arm-none-eabi-g++
|
||||
compiler.c.elf.flags={compiler.optimization_flags} -Wl,--gc-sections -save-temps
|
||||
compiler.S.cmd=arm-none-eabi-gcc
|
||||
compiler.S.flags=-c -g -x assembler-with-cpp -MMD
|
||||
compiler.cpp.cmd=arm-none-eabi-g++
|
||||
compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.optimization_flags} {compiler.warning_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD
|
||||
compiler.ar.cmd=arm-none-eabi-ar
|
||||
compiler.ar.flags=rcs
|
||||
compiler.objcopy.cmd=arm-none-eabi-objcopy
|
||||
compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
|
||||
compiler.elf2hex.bin.flags=-O binary
|
||||
compiler.elf2hex.hex.flags=-O ihex -R .eeprom
|
||||
compiler.elf2hex.cmd=arm-none-eabi-objcopy
|
||||
compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align
|
||||
compiler.size.cmd=arm-none-eabi-size
|
||||
compiler.define=-DARDUINO=
|
||||
compiler.readelf.cmd=arm-none-eabi-readelf
|
||||
|
||||
# this can be overriden in boards.txt
|
||||
build.extra_flags=
|
||||
|
||||
# These can be overridden in platform.local.txt
|
||||
compiler.c.extra_flags=
|
||||
compiler.c.elf.extra_flags=
|
||||
#compiler.c.elf.extra_flags=-v
|
||||
compiler.cpp.extra_flags=
|
||||
compiler.S.extra_flags=
|
||||
compiler.ar.extra_flags=
|
||||
compiler.elf2hex.extra_flags=
|
||||
|
||||
compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.0.path}/CMSIS/Device/ATMEL/"
|
||||
compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-4.5.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math
|
||||
|
||||
compiler.libraries.ldflags=
|
||||
|
||||
# USB Flags
|
||||
# ---------
|
||||
build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
|
||||
|
||||
# Default usb manufacturer will be replaced at compile time using
|
||||
# numeric vendor ID if available or by board's specific value.
|
||||
build.usb_manufacturer="Unknown"
|
||||
|
||||
# Compile patterns
|
||||
# ----------------
|
||||
|
||||
## Compile c files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile c++ files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Compile S files
|
||||
## KH Add -DBOARD_NAME="{build.board}"
|
||||
recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
##recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
|
||||
|
||||
## Create archives
|
||||
# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
|
||||
archive_file_path={build.path}/{archive_file}
|
||||
recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
|
||||
|
||||
## Combine gc-sections, archives, and objects
|
||||
recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} -lm "{build.path}/{archive_file}" -Wl,--end-group
|
||||
|
||||
## Create output (bin file)
|
||||
recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
|
||||
|
||||
## Create output (hex file)
|
||||
recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
|
||||
|
||||
build.preferred_out_format=bin
|
||||
|
||||
## Save hex
|
||||
recipe.output.tmp_file={build.project_name}.{build.preferred_out_format}
|
||||
recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format}
|
||||
|
||||
## Compute size
|
||||
recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
|
||||
recipe.size.regex=^(?:\.text|\.data|)\s+([0-9]+).*
|
||||
recipe.size.regex.data=^(?:\.data|\.bss)\s+([0-9]+).*
|
||||
|
||||
# Upload/Debug tools
|
||||
# ------------------
|
||||
|
||||
#
|
||||
# AVRDUDE
|
||||
#
|
||||
tools.avrdude.path={runtime.tools.avrdude.path}
|
||||
tools.avrdude.cmd={path}/bin/avrdude
|
||||
tools.avrdude.config.path={path}/etc/avrdude.conf
|
||||
|
||||
tools.avrdude.upload.params.verbose=-v -v
|
||||
tools.avrdude.upload.params.quiet=-q -q
|
||||
tools.avrdude.upload.params.noverify=-V
|
||||
tools.avrdude.upload.pattern="{cmd}" "-C{config.path}" {upload.verbose} -p{build.emu.mcu} -c{upload.protocol} -P{serial.port} -b{upload.speed} "-Uflash:w:{build.path}/{build.project_name}.hex:i"
|
||||
|
||||
tools.avrdude_remote.upload.pattern="openocd --version 2>&1 | grep 2016 && if opkg update; then opkg upgrade openocd; exit 1; else echo 'Please connect your board to the Internet in order to upgrade tools' >&2; exit 1; fi || /usr/bin/run-avrdude /tmp/sketch.hex"
|
||||
|
||||
tools.avrdude.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.avrdude.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
#
|
||||
# BOSSA
|
||||
#
|
||||
tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossac.cmd=bossac
|
||||
tools.bossac.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossac.upload.params.verbose=-i -d
|
||||
tools.bossac.upload.params.quiet=
|
||||
tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
arduinoota.extraflags=
|
||||
tools.bossac.network_cmd={runtime.tools.arduinoOTA-1.3.0.path}/bin/arduinoOTA
|
||||
tools.bossac.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b {arduinoota.extraflags}
|
||||
|
||||
#
|
||||
# BOSSA (ignore binary size)
|
||||
#
|
||||
tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path}
|
||||
tools.bossacI.cmd=bossac
|
||||
tools.bossacI.cmd.windows=bossac.exe
|
||||
|
||||
tools.bossacI.upload.params.verbose=-i -d
|
||||
tools.bossacI.upload.params.quiet=
|
||||
tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R
|
||||
|
||||
tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
|
||||
|
||||
tools.bossacI.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.bossacI.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload
|
||||
#
|
||||
|
||||
tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd.cmd=bin/openocd
|
||||
tools.openocd.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd.upload.params.verbose=-d2
|
||||
tools.openocd.upload.params.quiet=-d0
|
||||
tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown"
|
||||
|
||||
tools.openocd.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
|
||||
tools.openocd.upload.network_pattern={network_cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
|
||||
|
||||
tools.openocd.program.params.verbose=-d2
|
||||
tools.openocd.program.params.quiet=-d0
|
||||
tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.hex} verify reset; shutdown"
|
||||
|
||||
tools.openocd.erase.params.verbose=-d3
|
||||
tools.openocd.erase.params.quiet=-d0
|
||||
tools.openocd.erase.pattern=
|
||||
|
||||
tools.openocd.bootloader.params.verbose=-d2
|
||||
tools.openocd.bootloader.params.quiet=-d0
|
||||
tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
|
||||
#
|
||||
# OpenOCD sketch upload - version with configurable bootloader size
|
||||
# FIXME: this programmer is a workaround for default options being overwritten by uploadUsingPreferences
|
||||
#
|
||||
|
||||
tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path}
|
||||
tools.openocd-withbootsize.cmd=bin/openocd
|
||||
tools.openocd-withbootsize.cmd.windows=bin/openocd.exe
|
||||
|
||||
tools.openocd-withbootsize.upload.params.verbose=-d2
|
||||
tools.openocd-withbootsize.upload.params.quiet=-d0
|
||||
tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown"
|
||||
|
||||
# Program flashes the binary at 0x0000, so use the linker script without_bootloader
|
||||
tools.openocd-withbootsize.program.params.verbose=-d2
|
||||
tools.openocd-withbootsize.program.params.quiet=-d0
|
||||
tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
|
||||
|
||||
tools.openocd-withbootsize.erase.params.verbose=-d3
|
||||
tools.openocd-withbootsize.erase.params.quiet=-d0
|
||||
tools.openocd-withbootsize.erase.pattern=
|
||||
|
||||
tools.openocd-withbootsize.bootloader.params.verbose=-d2
|
||||
tools.openocd-withbootsize.bootloader.params.quiet=-d0
|
||||
tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
|
||||
|
||||
#
|
||||
# GDB (Debugger)
|
||||
#
|
||||
# EXPERIMENTAL feature: debug.pattern
|
||||
# - this is alpha and may be subject to change without notice
|
||||
tools.gdb-openocd.path={runtime.tools.arm-none-eabi-gcc-7-2017q4.path}/bin/
|
||||
tools.gdb-openocd.cmd=arm-none-eabi-gdb
|
||||
tools.gdb-openocd.cmd.windows=arm-none-eabi-gdb.exe
|
||||
tools.gdb-openocd.interpreter=console
|
||||
tools.gdb-openocd.debug.pattern="{path}/{cmd}" --interpreter={interpreter} -ex "set remotetimeout 5" -ex "set pagination off" -ex 'target extended-remote | "{tools.openocd.path}/{tools.openocd.cmd}" -s "{tools.openocd.path}/share/openocd/scripts/" --file "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "gdb_port pipe" -c "telnet_port 0"' "{build.path}/{build.project_name}.elf"
|
||||
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user