v1.3.1 to update PIO

### Releases v1.3.1 1. Update `platform.ini` and `library.json` to use original `khoih-prog` instead of `khoih.prog` after PIO fix 2. Update `Packages' Patches`
Update Packages_Patches
2021-10-09 15:17:08 -04:00 · 2021-10-09 15:13:36 -04:00 · 2021-10-09 15:12:57 -04:00 · 2021-10-02 00:20:58 -04:00 · 2021-09-16 22:09:57 -04:00 · 2021-08-24 14:22:42 -04:00
40 changed files with 3760 additions and 478 deletions
@@ -0,0 +1,12 @@
+name: auto-github-actions
+on: [push]
+jobs:
+  check-bats-version:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: '14'
+      - run: npm install -g bats
+      - run: bats -v
@@ -14,8 +14,8 @@ If you don't find anything, please [open a new issue](https://github.com/khoih-p

 Please ensure to specify the following:

-* Arduino IDE version (e.g. 1.8.15) or Platform.io version
-* `ESP8266`,`ESP32` or `STM32` Core Version (e.g. ESP8266 core v3.0.1, ESP32 v1.0.6 or STM32 v2.0.0)
+* Arduino IDE version (e.g. 1.8.16) or Platform.io version
+* `ESP8266`,`ESP32` or `STM32` Core Version (e.g. ESP8266 core v3.0.2, ESP32 v2.0.0 or STM32 v2.1.0)
 * Contextual information (e.g. what you were trying to achieve)
 * Simplest possible steps to reproduce
 * Anything that might be relevant in your opinion, such as:
@@ -26,10 +26,10 @@ Please ensure to specify the following:
 ### Example

 ```
-Arduino IDE version: 1.8.15
-ESP32 Core Version 1.0.6
+Arduino IDE version: 1.8.16
+ESP32 Core Version 2.0.0
 OS: Ubuntu 20.04 LTS
-Linux xy-Inspiron-3593 5.4.0-77-generic #86-Ubuntu SMP Thu Jun 17 02:35:03 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux
+Linux xy-Inspiron-3593 5.4.0-86-generic #97-Ubuntu SMP Fri Sep 17 19:19:40 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux

 Context:
 I encountered an endless loop while trying to connect to Local WiFi.
@@ -0,0 +1,274 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2020-2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+*/
+#pragma once
+
+/*----------------------------------------------------------------------------
+ *        Pins
+ *----------------------------------------------------------------------------*/
+
+#define PG9                     0
+#define PG14                    1
+#define PF15                    2
+#define PE13                    3
+#define PF14                    4
+#define PE11                    5
+#define PE9                     6
+#define PF13                    7
+#define PF12                    8
+#define PD15                    9
+#define PD14                    10
+#define PA7                     PIN_A10
+#define PA6                     PIN_A11
+#define PA5                     PIN_A12
+#define PB9                     14
+#define PB8                     15
+#define PC6                     16
+#define PB15                    17
+#define PB13                    18
+#define PB12                    19
+#define PA15                    20
+#define PC7                     21
+#define PB5                     22
+#define PB3                     23
+#define PA4                     PIN_A13
+#define PB4                     25
+#define PB6                     26
+#define PB2                     27
+#define PD13                    28
+#define PD12                    29
+#define PD11                    30
+#define PE2                     31
+#define PA0                     PIN_A14
+#define PB0                     PIN_A23 // LED_GREEN
+#define PE0                     34
+#define PB11                    35
+#define PB10                    36
+#define PE15                    37
+#define PE14                    38
+#define PE12                    39
+#define PE10                    40
+#define PE7                     41
+#define PE8                     42
+#define PC8                     43
+#define PC9                     44
+#define PC10                    45
+#define PC11                    46
+#define PC12                    47
+#define PD2                     48
+#define PG2                     49
+#define PG3                     50
+#define PD7                     51
+#define PD6                     52
+#define PD5                     53
+#define PD4                     54
+#define PD3                     55
+// 56 is PE2                    (31)
+#define PE4                     57
+#define PE5                     58
+#define PE6                     59
+#define PE3                     60
+#define PF8                     PIN_A15
+#define PF7                     PIN_A16
+#define PF9                     PIN_A17
+#define PG1                     64
+#define PG0                     65
+#define PD1                     66
+#define PD0                     67
+#define PF0                     68
+#define PF1                     69
+#define PF2                     70
+// 71 is PA7                    (11)
+// 72 is NC
+#define PB7                     73 // LED_BLUE
+#define PB14                    74 // LED_RED
+#define PC13                    75 // USER_BTN
+#define PD9                     76 // Serial Rx
+#define PD8                     77 // Serial Tx
+#define PA3                     PIN_A0
+#define PC0                     PIN_A1
+#define PC3                     PIN_A2
+#define PF3                     PIN_A3
+#define PF5                     PIN_A4
+#define PF10                    PIN_A5
+#define PB1                     PIN_A6
+#define PC2                     PIN_A7
+#define PF4                     PIN_A8
+#define PF6                     PIN_A9
+// ST Morpho
+#define PA1                     PIN_A18
+#define PA2                     PIN_A19
+#define PA8                     90
+#define PA9                     91
+#define PA10                    92
+#define PA11                    93
+#define PA12                    94
+#define PA13                    95 // SWD
+#define PA14                    96 // SWD
+#define PC1                     PIN_A20
+#define PC4                     PIN_A21
+#define PC5                     PIN_A22
+#define PC14                    100
+#define PC15                    101
+#define PD10                    102
+#define PE1                     103
+#define PF11                    104
+#define PG4                     105
+#define PG5                     106
+#define PG6                     107
+#define PG7                     108
+#define PG8                     109
+#define PG10                    110
+#define PG11                    111
+#define PG12                    112
+#define PG13                    113
+#define PG15                    114
+#define PH0                     115 // MCO
+#define PH1                     116
+
+// Alternate pins number
+#define PA0_ALT1                (PA0  | ALT1)
+#define PA0_ALT2                (PA0  | ALT2)
+#define PA1_ALT1                (PA1  | ALT1)
+#define PA1_ALT2                (PA1  | ALT2)
+#define PA2_ALT1                (PA2  | ALT1)
+#define PA2_ALT2                (PA2  | ALT2)
+#define PA3_ALT1                (PA3  | ALT1)
+#define PA3_ALT2                (PA3  | ALT2)
+#define PA4_ALT1                (PA4  | ALT1)
+#define PA5_ALT1                (PA5  | ALT1)
+#define PA6_ALT1                (PA6  | ALT1)
+#define PA7_ALT1                (PA7  | ALT1)
+#define PA7_ALT2                (PA7  | ALT2)
+#define PA7_ALT3                (PA7  | ALT3)
+#define PA15_ALT1               (PA15 | ALT1)
+#define PB0_ALT1                (PB0  | ALT1)
+#define PB0_ALT2                (PB0  | ALT2)
+#define PB1_ALT1                (PB1  | ALT1)
+#define PB1_ALT2                (PB1  | ALT2)
+#define PB3_ALT1                (PB3  | ALT1)
+#define PB4_ALT1                (PB4  | ALT1)
+#define PB5_ALT1                (PB5  | ALT1)
+#define PB8_ALT1                (PB8  | ALT1)
+#define PB9_ALT1                (PB9  | ALT1)
+#define PB14_ALT1               (PB14 | ALT1)
+#define PB14_ALT2               (PB14 | ALT2)
+#define PB15_ALT1               (PB15 | ALT1)
+#define PB15_ALT2               (PB15 | ALT2)
+#define PC0_ALT1                (PC0  | ALT1)
+#define PC0_ALT2                (PC0  | ALT2)
+#define PC1_ALT1                (PC1  | ALT1)
+#define PC1_ALT2                (PC1  | ALT2)
+#define PC2_ALT1                (PC2  | ALT1)
+#define PC2_ALT2                (PC2  | ALT2)
+#define PC3_ALT1                (PC3  | ALT1)
+#define PC3_ALT2                (PC3  | ALT2)
+#define PC4_ALT1                (PC4  | ALT1)
+#define PC5_ALT1                (PC5  | ALT1)
+#define PC6_ALT1                (PC6  | ALT1)
+#define PC7_ALT1                (PC7  | ALT1)
+#define PC8_ALT1                (PC8  | ALT1)
+#define PC9_ALT1                (PC9  | ALT1)
+#define PC10_ALT1               (PC10 | ALT1)
+#define PC11_ALT1               (PC11 | ALT1)
+
+// This must be a literal
+#define NUM_DIGITAL_PINS        117
+// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS       24
+
+// On-board LED pin number
+#ifndef LED_BUILTIN
+  #define LED_BUILTIN           PB0
+#endif
+#define LED_GREEN               LED_BUILTIN
+#define LED_BLUE                PB7
+#define LED_RED                 PB14
+
+// On-board user button
+#ifndef USER_BTN
+  #define USER_BTN              PC13
+#endif
+
+// Timer Definitions
+// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
+#ifndef TIMER_TONE
+  #define TIMER_TONE            TIM6
+#endif
+#ifndef TIMER_SERVO
+  #define TIMER_SERVO           TIM7
+#endif
+
+// UART Definitions
+#ifndef SERIAL_UART_INSTANCE
+  #define SERIAL_UART_INSTANCE  3 //Connected to ST-Link
+#endif
+// Serial pin used for console (ex: stlink)
+// Rerquired by Firmata
+#ifndef PIN_SERIAL_RX
+  #define PIN_SERIAL_RX         PD9
+#endif
+#ifndef PIN_SERIAL_TX
+  #define PIN_SERIAL_TX         PD8
+#endif
+
+// Value of the External oscillator in Hz
+#define HSE_VALUE               8000000U
+
+/* Extra HAL modules */
+#if !defined(HAL_DAC_MODULE_DISABLED)
+  #define HAL_DAC_MODULE_ENABLED
+#endif
+#if !defined(HAL_ETH_MODULE_DISABLED)
+  #define HAL_ETH_MODULE_ENABLED
+#endif
+#if !defined(HAL_QSPI_MODULE_DISABLED)
+  #define HAL_QSPI_MODULE_ENABLED
+#endif
+#if !defined(HAL_SD_MODULE_DISABLED)
+  #define HAL_SD_MODULE_ENABLED
+#endif
+
+// Last Flash sector used for EEPROM emulation, address/sector depends on single/dual bank configuration.
+// By default 2MB single bank
+#define FLASH_BASE_ADDRESS      0x081C0000
+#define FLASH_DATA_SECTOR       11
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+  // These serial port names are intended to allow libraries and architecture-neutral
+  // sketches to automatically default to the correct port name for a particular type
+  // of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+  // the first hardware serial port whose RX/TX pins are not dedicated to another use.
+  //
+  // SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+  //
+  // SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+  //
+  // SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+  //
+  // SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+  //
+  // SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+  //                            pins are NOT connected to anything by default.
+  #ifndef SERIAL_PORT_MONITOR
+    #define SERIAL_PORT_MONITOR     Serial
+  #endif
+  #ifndef SERIAL_PORT_HARDWARE
+    // KH mod to add Serial1, for ESP-AT
+    //#define SERIAL_PORT_HARDWARE    Serial
+    #define SERIAL_PORT_HARDWARE    Serial1
+  #endif
+#endif
@@ -0,0 +1,173 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2020-2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+#pragma once
+
+/*----------------------------------------------------------------------------
+ *        STM32 pins number
+ *----------------------------------------------------------------------------*/
+#define PA0                     PIN_A0
+#define PA1                     PIN_A1
+#define PA2                     PIN_A2
+#define PA3                     PIN_A3
+#define PA4                     PIN_A4
+#define PA5                     PIN_A5
+#define PA6                     PIN_A6
+#define PA7                     PIN_A7
+#define PA8                     8
+#define PA9                     9
+#define PA10                    10
+#define PA11                    11
+#define PA12                    12
+#define PA13                    13
+#define PA14                    14
+#define PA15                    15
+#define PB0                     PIN_A8
+#define PB1                     PIN_A9
+#define PB2                     18
+#define PB3                     19
+#define PB4                     20
+#define PB5                     21
+#define PB6                     22
+#define PB7                     23
+#define PB8                     24
+#define PB9                     25
+#define PB10                    26
+#define PB11                    27
+#define PB12                    28
+#define PB13                    29
+#define PB14                    30
+#define PB15                    31
+#define PC0                     PIN_A10
+#define PC1                     PIN_A11
+#define PC2                     PIN_A12
+#define PC4                     PIN_A13
+#define PC5                     PIN_A14
+#define PC6                     37
+#define PC7                     38
+#define PC8                     39
+#define PC9                     40
+#define PC10                    41
+#define PC11                    42
+#define PC12                    43
+#define PC13                    44
+#define PC14                    45
+#define PC15                    46
+#define PD2                     47
+#define PH0                     48
+#define PH1                     49
+
+// Alternate pins number
+#define PA2_ALT1                (PA2 | ALT1)
+#define PA3_ALT1                (PA3 | ALT1)
+
+#define NUM_DIGITAL_PINS        50
+#define NUM_ANALOG_INPUTS       15
+
+// On-board LED pin number
+#ifndef LED_BUILTIN
+  #define LED_BUILTIN           PNUM_NOT_DEFINED
+#endif
+
+// On-board user button
+#ifndef USER_BTN
+  #define USER_BTN              PNUM_NOT_DEFINED
+#endif
+
+// SPI definitions
+#ifndef PIN_SPI_SS
+  #define PIN_SPI_SS            PA4
+#endif
+#ifndef PIN_SPI_SS1
+  #define PIN_SPI_SS1           PA15
+#endif
+#ifndef PIN_SPI_SS2
+  #define PIN_SPI_SS2           PNUM_NOT_DEFINED
+#endif
+#ifndef PIN_SPI_SS3
+  #define PIN_SPI_SS3           PNUM_NOT_DEFINED
+#endif
+#ifndef PIN_SPI_MOSI
+  #define PIN_SPI_MOSI          PA7
+#endif
+#ifndef PIN_SPI_MISO
+  #define PIN_SPI_MISO          PA6
+#endif
+#ifndef PIN_SPI_SCK
+  #define PIN_SPI_SCK           PA5
+#endif
+
+// I2C definitions
+#ifndef PIN_WIRE_SDA
+  #define PIN_WIRE_SDA          PB7
+#endif
+#ifndef PIN_WIRE_SCL
+  #define PIN_WIRE_SCL          PB6
+#endif
+
+// Timer Definitions
+// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
+#ifndef TIMER_TONE
+  #define TIMER_TONE            TIM6
+#endif
+#ifndef TIMER_SERVO
+  #define TIMER_SERVO           TIM21
+#endif
+
+// UART Definitions
+#ifndef SERIAL_UART_INSTANCE
+  #define SERIAL_UART_INSTANCE  2
+#endif
+
+// Default pin used for generic 'Serial' instance
+// Mandatory for Firmata
+#ifndef PIN_SERIAL_RX
+  #define PIN_SERIAL_RX         PA3
+#endif
+#ifndef PIN_SERIAL_TX
+  #define PIN_SERIAL_TX         PA2
+#endif
+
+// Extra HAL modules
+#if !defined(HAL_DAC_MODULE_DISABLED)
+  #define HAL_DAC_MODULE_ENABLED
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+  // These serial port names are intended to allow libraries and architecture-neutral
+  // sketches to automatically default to the correct port name for a particular type
+  // of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+  // the first hardware serial port whose RX/TX pins are not dedicated to another use.
+  //
+  // SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+  //
+  // SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+  //
+  // SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+  //
+  // SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+  //
+  // SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+  //                            pins are NOT connected to anything by default.
+  #ifndef SERIAL_PORT_MONITOR
+    #define SERIAL_PORT_MONITOR   Serial
+  #endif
+  #ifndef SERIAL_PORT_HARDWARE
+    // KH mod to add Serial1, for ESP-AT
+    //#define SERIAL_PORT_HARDWARE    Serial
+    #define SERIAL_PORT_HARDWARE    Serial1
+  #endif
+#endif
@@ -0,0 +1,519 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_conf_default.h
+  * @brief   HAL default configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_DEFAULT_H
+#define __STM32F4xx_HAL_CONF_DEFAULT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief Include the default list of modules to be used in the HAL driver
+  *        and manage module deactivation
+  */
+#include "stm32yyxx_hal_conf.h"
+#if 0
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+/*#define HAL_CAN_LEGACY_MODULE_ENABLED*/
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_DSI_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_FMPI2C_MODULE_ENABLED
+#define HAL_FMPSMBUS_MODULE_ENABLED
+#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_DFSDM_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_MMC_MODULE_ENABLED
+#endif
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE              8000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT    100U      /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE              16000000U /*!< Value of the Internal oscillator in Hz */
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+#define LSI_VALUE               32000U    /*!< LSI Typical Value in Hz */
+#endif /* LSI_VALUE */                     /*!< Value of the Internal Low Speed oscillator in Hz
+The real value may vary depending on the variations
+in voltage and temperature. */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+#define LSE_VALUE               32768U    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT    5000U     /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+#define EXTERNAL_CLOCK_VALUE     12288000U /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#if !defined (VDD_VALUE)
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#endif
+#if !defined (TICK_INT_PRIORITY)
+#define  TICK_INT_PRIORITY            0x00U /*!< tick interrupt priority */
+#endif
+#if !defined (USE_RTOS)
+#define  USE_RTOS                     0U
+#endif
+#if !defined (PREFETCH_ENABLE)
+#define  PREFETCH_ENABLE              1U
+#endif
+#if !defined (INSTRUCTION_CACHE_ENABLE)
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#endif
+#if !defined (DATA_CACHE_ENABLE)
+#define  DATA_CACHE_ENABLE            1U
+#endif
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
+#define  USE_HAL_FMPSMBUS_REGISTER_CALLBACKS    0U /* FMPSMBUS register callback disabled  */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    (5U)                /* 5 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    (5U)                /* 5 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+/* LAN8742A PHY Address*/
+////////////////////////////////
+//#define LAN8742A_PHY_ADDRESS            0x00U
+/* Section 2: PHY configuration section */
+#if !defined  (LAN8742A_PHY_ADDRESS)
+  /* LAN8742A PHY Address*/
+  #define LAN8742A_PHY_ADDRESS            0x00U
+#endif
+////////////////////////////////
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000)  /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001)  /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x1F)    /*!< PHY special control/ status register Offset     */
+
+#define PHY_SPEED_STATUS                ((uint16_t)0x0004)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010)  /*!< PHY Duplex mask                                 */
+
+
+#define PHY_ISFR                        ((uint16_t)0x1D)    /*!< PHY Interrupt Source Flag register Offset       */
+#define PHY_IMR                         ((uint16_t)0x1E)    /*!< PHY Interrupt Mask register Offset              */
+#define PHY_ISFR_INT4                   ((uint16_t)0x0010)  /*!< PHY Link down inturrupt                         */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+#if !defined (USE_SPI_CRC)
+#define USE_SPI_CRC                     0U
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+#include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+#include "stm32f4xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+#include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+#include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+#include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+#include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+#include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+#include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+#include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+#include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+#include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+#include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+#include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+#include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+#include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+#include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+#include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+#include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+#include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+#include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+#include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+#include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_FMPSMBUS_MODULE_ENABLED
+#include "stm32f4xx_hal_fmpsmbus.h"
+#endif /* HAL_FMPSMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+#include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+#include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+#include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t *file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_DEFAULT_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -0,0 +1,511 @@
+/**
+  ******************************************************************************
+  * @file    stm32f7xx_hal_conf_default.h
+  * @brief   HAL default configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F7xx_HAL_CONF_DEFAULT_H
+#define __STM32F7xx_HAL_CONF_DEFAULT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief Include the default list of modules to be used in the HAL driver
+  *        and manage module deactivation
+  */
+#include "stm32yyxx_hal_conf.h"
+#if 0
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CAN_LEGACY_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_DFSDM_MODULE_ENABLED
+#define HAL_DSI_MODULE_ENABLED
+#define HAL_JPEG_MODULE_ENABLED
+#define HAL_MDIOS_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_MMC_MODULE_ENABLED
+#endif
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE    25000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE    16000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+#define LSI_VALUE  32000U                  /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+The real value may vary depending on the variations
+in voltage and temperature.  */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+#define LSE_VALUE  32768U    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+#define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#if !defined (VDD_VALUE)
+#define  VDD_VALUE                    3300U /*!< Value of VDD in mv */
+#endif
+#if !defined (TICK_INT_PRIORITY)
+#define  TICK_INT_PRIORITY            0x00U /*!< tick interrupt priority */
+#endif
+#if !defined (USE_RTOS)
+#define  USE_RTOS                     0U
+#endif
+#if !defined (PREFETCH_ENABLE)
+#define  PREFETCH_ENABLE              1U /* To enable prefetch */
+#endif
+#if !defined (ART_ACCLERATOR_ENABLE)
+#define  ART_ACCLERATOR_ENABLE        1U /* To enable ART Accelerator */
+#endif
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_JPEG_REGISTER_CALLBACKS        0U /* JPEG register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
+#define  USE_HAL_MDIOS_REGISTER_CALLBACKS       0U /* MDIOS register callback disabled     */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1 */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    4U       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+/* LAN8742A PHY Address*/
+////////////////////////////////
+//#define LAN8742A_PHY_ADDRESS            0x00U
+/* Section 2: PHY configuration section */
+#if !defined  (LAN8742A_PHY_ADDRESS)
+  /* LAN8742A PHY Address*/
+  #define LAN8742A_PHY_ADDRESS            0x00U
+#endif
+////////////////////////////////
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 0x00000FFFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x00U)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x01U)    /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR                          ((uint16_t)0x1FU)    /*!< PHY special control/ status register Offset     */
+
+#define PHY_SPEED_STATUS                ((uint16_t)0x0004U)  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t)0x0010U)  /*!< PHY Duplex mask                                 */
+
+
+#define PHY_ISFR                        ((uint16_t)0x01DU)   /*!< PHY Interrupt Source Flag register Offset       */
+#define PHY_IMR                         ((uint16_t)0x001E)   /*!< PHY Interrupt Mask register Offset              */
+#define PHY_ISFR_INT4                   ((uint16_t)0x0010U)  /*!< PHY Link down inturrupt                         */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+#if !defined (USE_SPI_CRC)
+#define USE_SPI_CRC                     0U
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32f7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32f7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32f7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32f7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32f7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+#include "stm32f7xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+#include "stm32f7xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+#include "stm32f7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32f7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+#include "stm32f7xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+#include "stm32f7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32f7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+#include "stm32f7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+#include "stm32f7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32f7xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32f7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+#include "stm32f7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+#include "stm32f7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+#include "stm32f7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+#include "stm32f7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+#include "stm32f7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32f7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+#include "stm32f7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32f7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32f7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+#include "stm32f7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32f7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+#include "stm32f7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+#include "stm32f7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32f7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+#include "stm32f7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+#include "stm32f7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+#include "stm32f7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32f7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32f7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32f7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32f7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32f7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32f7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32f7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32f7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32f7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+#include "stm32f7xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+#include "stm32f7xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_JPEG_MODULE_ENABLED
+#include "stm32f7xx_hal_jpeg.h"
+#endif /* HAL_JPEG_MODULE_ENABLED */
+
+#ifdef HAL_MDIOS_MODULE_ENABLED
+#include "stm32f7xx_hal_mdios.h"
+#endif /* HAL_MDIOS_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+#include "stm32f7xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+#include "stm32f7xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t *file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F7xx_HAL_CONF_DEFAULT_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
@@ -0,0 +1,274 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2020-2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+*/
+#pragma once
+
+/*----------------------------------------------------------------------------
+ *        Pins
+ *----------------------------------------------------------------------------*/
+
+#define PG9                     0
+#define PG14                    1
+#define PF15                    2
+#define PE13                    3
+#define PF14                    4
+#define PE11                    5
+#define PE9                     6
+#define PF13                    7
+#define PF12                    8
+#define PD15                    9
+#define PD14                    10
+#define PA7                     PIN_A10
+#define PA6                     PIN_A11
+#define PA5                     PIN_A12
+#define PB9                     14
+#define PB8                     15
+#define PC6                     16
+#define PB15                    17
+#define PB13                    18
+#define PB12                    19
+#define PA15                    20
+#define PC7                     21
+#define PB5                     22
+#define PB3                     23
+#define PA4                     PIN_A13
+#define PB4                     25
+#define PB6                     26
+#define PB2                     27
+#define PD13                    28
+#define PD12                    29
+#define PD11                    30
+#define PE2                     31
+#define PA0                     PIN_A14
+#define PB0                     PIN_A23 // LED_GREEN
+#define PE0                     34
+#define PB11                    35
+#define PB10                    36
+#define PE15                    37
+#define PE14                    38
+#define PE12                    39
+#define PE10                    40
+#define PE7                     41
+#define PE8                     42
+#define PC8                     43
+#define PC9                     44
+#define PC10                    45
+#define PC11                    46
+#define PC12                    47
+#define PD2                     48
+#define PG2                     49
+#define PG3                     50
+#define PD7                     51
+#define PD6                     52
+#define PD5                     53
+#define PD4                     54
+#define PD3                     55
+// 56 is PE2                    (31)
+#define PE4                     57
+#define PE5                     58
+#define PE6                     59
+#define PE3                     60
+#define PF8                     PIN_A15
+#define PF7                     PIN_A16
+#define PF9                     PIN_A17
+#define PG1                     64
+#define PG0                     65
+#define PD1                     66
+#define PD0                     67
+#define PF0                     68
+#define PF1                     69
+#define PF2                     70
+// 71 is PA7                    (11)
+// 72 is NC
+#define PB7                     73 // LED_BLUE
+#define PB14                    74 // LED_RED
+#define PC13                    75 // USER_BTN
+#define PD9                     76 // Serial Rx
+#define PD8                     77 // Serial Tx
+#define PA3                     PIN_A0
+#define PC0                     PIN_A1
+#define PC3                     PIN_A2
+#define PF3                     PIN_A3
+#define PF5                     PIN_A4
+#define PF10                    PIN_A5
+#define PB1                     PIN_A6
+#define PC2                     PIN_A7
+#define PF4                     PIN_A8
+#define PF6                     PIN_A9
+// ST Morpho
+#define PA1                     PIN_A18
+#define PA2                     PIN_A19
+#define PA8                     90
+#define PA9                     91
+#define PA10                    92
+#define PA11                    93
+#define PA12                    94
+#define PA13                    95 // SWD
+#define PA14                    96 // SWD
+#define PC1                     PIN_A20
+#define PC4                     PIN_A21
+#define PC5                     PIN_A22
+#define PC14                    100
+#define PC15                    101
+#define PD10                    102
+#define PE1                     103
+#define PF11                    104
+#define PG4                     105
+#define PG5                     106
+#define PG6                     107
+#define PG7                     108
+#define PG8                     109
+#define PG10                    110
+#define PG11                    111
+#define PG12                    112
+#define PG13                    113
+#define PG15                    114
+#define PH0                     115 // MCO
+#define PH1                     116
+
+// Alternate pins number
+#define PA0_ALT1                (PA0  | ALT1)
+#define PA0_ALT2                (PA0  | ALT2)
+#define PA1_ALT1                (PA1  | ALT1)
+#define PA1_ALT2                (PA1  | ALT2)
+#define PA2_ALT1                (PA2  | ALT1)
+#define PA2_ALT2                (PA2  | ALT2)
+#define PA3_ALT1                (PA3  | ALT1)
+#define PA3_ALT2                (PA3  | ALT2)
+#define PA4_ALT1                (PA4  | ALT1)
+#define PA5_ALT1                (PA5  | ALT1)
+#define PA6_ALT1                (PA6  | ALT1)
+#define PA7_ALT1                (PA7  | ALT1)
+#define PA7_ALT2                (PA7  | ALT2)
+#define PA7_ALT3                (PA7  | ALT3)
+#define PA15_ALT1               (PA15 | ALT1)
+#define PB0_ALT1                (PB0  | ALT1)
+#define PB0_ALT2                (PB0  | ALT2)
+#define PB1_ALT1                (PB1  | ALT1)
+#define PB1_ALT2                (PB1  | ALT2)
+#define PB3_ALT1                (PB3  | ALT1)
+#define PB4_ALT1                (PB4  | ALT1)
+#define PB5_ALT1                (PB5  | ALT1)
+#define PB8_ALT1                (PB8  | ALT1)
+#define PB9_ALT1                (PB9  | ALT1)
+#define PB14_ALT1               (PB14 | ALT1)
+#define PB14_ALT2               (PB14 | ALT2)
+#define PB15_ALT1               (PB15 | ALT1)
+#define PB15_ALT2               (PB15 | ALT2)
+#define PC0_ALT1                (PC0  | ALT1)
+#define PC0_ALT2                (PC0  | ALT2)
+#define PC1_ALT1                (PC1  | ALT1)
+#define PC1_ALT2                (PC1  | ALT2)
+#define PC2_ALT1                (PC2  | ALT1)
+#define PC2_ALT2                (PC2  | ALT2)
+#define PC3_ALT1                (PC3  | ALT1)
+#define PC3_ALT2                (PC3  | ALT2)
+#define PC4_ALT1                (PC4  | ALT1)
+#define PC5_ALT1                (PC5  | ALT1)
+#define PC6_ALT1                (PC6  | ALT1)
+#define PC7_ALT1                (PC7  | ALT1)
+#define PC8_ALT1                (PC8  | ALT1)
+#define PC9_ALT1                (PC9  | ALT1)
+#define PC10_ALT1               (PC10 | ALT1)
+#define PC11_ALT1               (PC11 | ALT1)
+
+// This must be a literal
+#define NUM_DIGITAL_PINS        117
+// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS       24
+
+// On-board LED pin number
+#ifndef LED_BUILTIN
+  #define LED_BUILTIN           PB0
+#endif
+#define LED_GREEN               LED_BUILTIN
+#define LED_BLUE                PB7
+#define LED_RED                 PB14
+
+// On-board user button
+#ifndef USER_BTN
+  #define USER_BTN              PC13
+#endif
+
+// Timer Definitions
+// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
+#ifndef TIMER_TONE
+  #define TIMER_TONE            TIM6
+#endif
+#ifndef TIMER_SERVO
+  #define TIMER_SERVO           TIM7
+#endif
+
+// UART Definitions
+#ifndef SERIAL_UART_INSTANCE
+  #define SERIAL_UART_INSTANCE  3 //Connected to ST-Link
+#endif
+// Serial pin used for console (ex: stlink)
+// Rerquired by Firmata
+#ifndef PIN_SERIAL_RX
+  #define PIN_SERIAL_RX         PD9
+#endif
+#ifndef PIN_SERIAL_TX
+  #define PIN_SERIAL_TX         PD8
+#endif
+
+// Value of the External oscillator in Hz
+#define HSE_VALUE               8000000U
+
+/* Extra HAL modules */
+#if !defined(HAL_DAC_MODULE_DISABLED)
+  #define HAL_DAC_MODULE_ENABLED
+#endif
+#if !defined(HAL_ETH_MODULE_DISABLED)
+  #define HAL_ETH_MODULE_ENABLED
+#endif
+#if !defined(HAL_QSPI_MODULE_DISABLED)
+  #define HAL_QSPI_MODULE_ENABLED
+#endif
+#if !defined(HAL_SD_MODULE_DISABLED)
+  #define HAL_SD_MODULE_ENABLED
+#endif
+
+// Last Flash sector used for EEPROM emulation, address/sector depends on single/dual bank configuration.
+// By default 2MB single bank
+#define FLASH_BASE_ADDRESS      0x081C0000
+#define FLASH_DATA_SECTOR       11
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+  // These serial port names are intended to allow libraries and architecture-neutral
+  // sketches to automatically default to the correct port name for a particular type
+  // of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+  // the first hardware serial port whose RX/TX pins are not dedicated to another use.
+  //
+  // SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+  //
+  // SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+  //
+  // SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+  //
+  // SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+  //
+  // SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+  //                            pins are NOT connected to anything by default.
+  #ifndef SERIAL_PORT_MONITOR
+    #define SERIAL_PORT_MONITOR     Serial
+  #endif
+  #ifndef SERIAL_PORT_HARDWARE
+    // KH mod to add Serial1, for ESP-AT
+    //#define SERIAL_PORT_HARDWARE    Serial
+    #define SERIAL_PORT_HARDWARE    Serial1
+  #endif
+#endif
@@ -0,0 +1,173 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2020-2021, STMicroelectronics
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ *                        opensource.org/licenses/BSD-3-Clause
+ *
+ *******************************************************************************
+ */
+#pragma once
+
+/*----------------------------------------------------------------------------
+ *        STM32 pins number
+ *----------------------------------------------------------------------------*/
+#define PA0                     PIN_A0
+#define PA1                     PIN_A1
+#define PA2                     PIN_A2
+#define PA3                     PIN_A3
+#define PA4                     PIN_A4
+#define PA5                     PIN_A5
+#define PA6                     PIN_A6
+#define PA7                     PIN_A7
+#define PA8                     8
+#define PA9                     9
+#define PA10                    10
+#define PA11                    11
+#define PA12                    12
+#define PA13                    13
+#define PA14                    14
+#define PA15                    15
+#define PB0                     PIN_A8
+#define PB1                     PIN_A9
+#define PB2                     18
+#define PB3                     19
+#define PB4                     20
+#define PB5                     21
+#define PB6                     22
+#define PB7                     23
+#define PB8                     24
+#define PB9                     25
+#define PB10                    26
+#define PB11                    27
+#define PB12                    28
+#define PB13                    29
+#define PB14                    30
+#define PB15                    31
+#define PC0                     PIN_A10
+#define PC1                     PIN_A11
+#define PC2                     PIN_A12
+#define PC4                     PIN_A13
+#define PC5                     PIN_A14
+#define PC6                     37
+#define PC7                     38
+#define PC8                     39
+#define PC9                     40
+#define PC10                    41
+#define PC11                    42
+#define PC12                    43
+#define PC13                    44
+#define PC14                    45
+#define PC15                    46
+#define PD2                     47
+#define PH0                     48
+#define PH1                     49
+
+// Alternate pins number
+#define PA2_ALT1                (PA2 | ALT1)
+#define PA3_ALT1                (PA3 | ALT1)
+
+#define NUM_DIGITAL_PINS        50
+#define NUM_ANALOG_INPUTS       15
+
+// On-board LED pin number
+#ifndef LED_BUILTIN
+  #define LED_BUILTIN           PNUM_NOT_DEFINED
+#endif
+
+// On-board user button
+#ifndef USER_BTN
+  #define USER_BTN              PNUM_NOT_DEFINED
+#endif
+
+// SPI definitions
+#ifndef PIN_SPI_SS
+  #define PIN_SPI_SS            PA4
+#endif
+#ifndef PIN_SPI_SS1
+  #define PIN_SPI_SS1           PA15
+#endif
+#ifndef PIN_SPI_SS2
+  #define PIN_SPI_SS2           PNUM_NOT_DEFINED
+#endif
+#ifndef PIN_SPI_SS3
+  #define PIN_SPI_SS3           PNUM_NOT_DEFINED
+#endif
+#ifndef PIN_SPI_MOSI
+  #define PIN_SPI_MOSI          PA7
+#endif
+#ifndef PIN_SPI_MISO
+  #define PIN_SPI_MISO          PA6
+#endif
+#ifndef PIN_SPI_SCK
+  #define PIN_SPI_SCK           PA5
+#endif
+
+// I2C definitions
+#ifndef PIN_WIRE_SDA
+  #define PIN_WIRE_SDA          PB7
+#endif
+#ifndef PIN_WIRE_SCL
+  #define PIN_WIRE_SCL          PB6
+#endif
+
+// Timer Definitions
+// Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
+#ifndef TIMER_TONE
+  #define TIMER_TONE            TIM6
+#endif
+#ifndef TIMER_SERVO
+  #define TIMER_SERVO           TIM21
+#endif
+
+// UART Definitions
+#ifndef SERIAL_UART_INSTANCE
+  #define SERIAL_UART_INSTANCE  2
+#endif
+
+// Default pin used for generic 'Serial' instance
+// Mandatory for Firmata
+#ifndef PIN_SERIAL_RX
+  #define PIN_SERIAL_RX         PA3
+#endif
+#ifndef PIN_SERIAL_TX
+  #define PIN_SERIAL_TX         PA2
+#endif
+
+// Extra HAL modules
+#if !defined(HAL_DAC_MODULE_DISABLED)
+  #define HAL_DAC_MODULE_ENABLED
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+  // These serial port names are intended to allow libraries and architecture-neutral
+  // sketches to automatically default to the correct port name for a particular type
+  // of use.  For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+  // the first hardware serial port whose RX/TX pins are not dedicated to another use.
+  //
+  // SERIAL_PORT_MONITOR        Port which normally prints to the Arduino Serial Monitor
+  //
+  // SERIAL_PORT_USBVIRTUAL     Port which is USB virtual serial
+  //
+  // SERIAL_PORT_LINUXBRIDGE    Port which connects to a Linux system via Bridge library
+  //
+  // SERIAL_PORT_HARDWARE       Hardware serial port, physical RX & TX pins.
+  //
+  // SERIAL_PORT_HARDWARE_OPEN  Hardware serial ports which are open for use.  Their RX & TX
+  //                            pins are NOT connected to anything by default.
+  #ifndef SERIAL_PORT_MONITOR
+    #define SERIAL_PORT_MONITOR   Serial
+  #endif
+  #ifndef SERIAL_PORT_HARDWARE
+    // KH mod to add Serial1, for ESP-AT
+    //#define SERIAL_PORT_HARDWARE    Serial
+    #define SERIAL_PORT_HARDWARE    Serial1
+  #endif
+#endif
@@ -34,7 +34,12 @@ compiler.optimization_flag=-Ofast
 compiler.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
 compiler.c.cmd=arm-none-eabi-gcc
 compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.warning_flags} {build.float_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
-compiler.c.elf.cmd=arm-none-eabi-gcc
+
+
+# KH, Error here to use gcc, must use g++
+#compiler.c.elf.cmd=arm-none-eabi-gcc
+compiler.c.elf.cmd=arm-none-eabi-g++
+
 compiler.c.elf.flags={compiler.optimization_flag} -Wl,--gc-sections -save-temps
 compiler.S.cmd=arm-none-eabi-gcc
 compiler.S.flags=-mcpu={build.mcu} -mthumb -mabi=aapcs {compiler.optimization_flag} -g -c {build.float_flags} -x assembler-with-cpp
@@ -34,7 +34,11 @@ compiler.optimization_flag=-Ofast
 compiler.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
 compiler.c.cmd=arm-none-eabi-gcc
 compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.warning_flags} {build.float_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
-compiler.c.elf.cmd=arm-none-eabi-gcc
+
+# KH, Error here to use gcc, must use g++
+#compiler.c.elf.cmd=arm-none-eabi-gcc
+compiler.c.elf.cmd=arm-none-eabi-g++
+
 compiler.c.elf.flags={compiler.optimization_flag} -Wl,--gc-sections -save-temps
 compiler.S.cmd=arm-none-eabi-gcc
 compiler.S.flags=-mcpu={build.mcu} -mthumb -mabi=aapcs {compiler.optimization_flag} -g -c {build.float_flags} -x assembler-with-cpp
@@ -0,0 +1,647 @@
+# Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+# Copyright (c) 2016 Sandeep Mistry All right reserved.
+# Copyright (c) 2017 Adafruit Industries.  All right reserved.
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+menu.softdevice=SoftDevice
+menu.debug=Debug
+
+# ----------------------------------
+# Bluefruit Feather nRF52832
+# ----------------------------------
+feather52832.name=Adafruit Feather nRF52832
+feather52832.bootloader.tool=bootburn
+
+# Upload
+feather52832.upload.tool=nrfutil
+feather52832.upload.protocol=nrfutil
+feather52832.upload.use_1200bps_touch=false
+feather52832.upload.wait_for_upload_port=false
+feather52832.upload.native_usb=false
+feather52832.upload.maximum_size=290816
+feather52832.upload.maximum_data_size=52224
+
+# Build
+feather52832.build.mcu=cortex-m4
+feather52832.build.f_cpu=64000000
+feather52832.build.board=NRF52832_FEATHER
+feather52832.build.core=nRF5
+feather52832.build.variant=feather_nrf52832
+feather52832.build.usb_manufacturer="Adafruit LLC"
+feather52832.build.usb_product="Feather nRF52832"
+feather52832.build.extra_flags=-DNRF52832_XXAA -DNRF52
+feather52832.build.ldscript=nrf52832_s132_v6.ld
+
+# SofDevice Menu
+feather52832.menu.softdevice.s132v6=S132 6.1.1
+feather52832.menu.softdevice.s132v6.build.sd_name=s132
+feather52832.menu.softdevice.s132v6.build.sd_version=6.1.1
+feather52832.menu.softdevice.s132v6.build.sd_fwid=0x00B7
+
+# Debug Menu
+feather52832.menu.debug.l0=Level 0 (Release)
+feather52832.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+feather52832.menu.debug.l1=Level 1 (Error Message)
+feather52832.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+feather52832.menu.debug.l2=Level 2 (Full Debug)
+feather52832.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+feather52832.menu.debug.l3=Level 3 (Segger SystemView)
+feather52832.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+feather52832.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
+
+# ----------------------------------
+# Bluefruit Feather nRF52840 Express
+# ----------------------------------
+feather52840.name=Adafruit Feather nRF52840 Express
+
+# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
+feather52840.vid.0=0x239A
+feather52840.pid.0=0x8029
+feather52840.vid.1=0x239A
+feather52840.pid.1=0x0029
+feather52840.vid.2=0x239A
+feather52840.pid.2=0x002A
+feather52840.vid.3=0x239A
+feather52840.pid.3=0x802A
+
+# Upload
+feather52840.bootloader.tool=bootburn
+feather52840.upload.tool=nrfutil
+feather52840.upload.protocol=nrfutil
+feather52840.upload.use_1200bps_touch=true
+feather52840.upload.wait_for_upload_port=true
+feather52840.upload.maximum_size=815104
+feather52840.upload.maximum_data_size=237568
+
+# Build
+feather52840.build.mcu=cortex-m4
+feather52840.build.f_cpu=64000000
+feather52840.build.board=NRF52840_FEATHER
+feather52840.build.core=nRF5
+feather52840.build.variant=feather_nrf52840_express
+feather52840.build.usb_manufacturer="Adafruit LLC"
+feather52840.build.usb_product="Feather nRF52840 Express"
+feather52840.build.extra_flags=-DNRF52840_XXAA {build.flags.usb}
+feather52840.build.ldscript=nrf52840_s140_v6.ld
+feather52840.build.vid=0x239A
+feather52840.build.pid=0x8029
+
+# SofDevice Menu
+feather52840.menu.softdevice.s140v6=S140 6.1.1
+feather52840.menu.softdevice.s140v6.build.sd_name=s140
+feather52840.menu.softdevice.s140v6.build.sd_version=6.1.1
+feather52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
+
+# Debug Menu
+feather52840.menu.debug.l0=Level 0 (Release)
+feather52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+feather52840.menu.debug.l1=Level 1 (Error Message)
+feather52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+feather52840.menu.debug.l2=Level 2 (Full Debug)
+feather52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+feather52840.menu.debug.l3=Level 3 (Segger SystemView)
+feather52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+feather52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
+
+
+# ----------------------------------
+# Feather nRF52840 sense
+# ----------------------------------
+feather52840sense.name=Adafruit Feather nRF52840 Sense
+
+# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
+feather52840sense.vid.0=0x239A
+feather52840sense.pid.0=0x8087
+feather52840sense.vid.1=0x239A
+feather52840sense.pid.1=0x0087
+feather52840sense.vid.2=0x239A
+feather52840sense.pid.2=0x0088
+feather52840sense.vid.3=0x239A
+feather52840sense.pid.3=0x8088
+
+# Upload
+feather52840sense.bootloader.tool=bootburn
+feather52840sense.upload.tool=nrfutil
+feather52840sense.upload.protocol=nrfutil
+feather52840sense.upload.use_1200bps_touch=true
+feather52840sense.upload.wait_for_upload_port=true
+feather52840sense.upload.maximum_size=815104
+feather52840sense.upload.maximum_data_size=237568
+
+# Build
+feather52840sense.build.mcu=cortex-m4
+feather52840sense.build.f_cpu=64000000
+feather52840sense.build.board=NRF52840_FEATHER_SENSE
+feather52840sense.build.core=nRF5
+feather52840sense.build.variant=feather_nrf52840_sense
+feather52840sense.build.usb_manufacturer="Adafruit LLC"
+feather52840sense.build.usb_product="Feather nRF52840 Sense"
+feather52840sense.build.extra_flags=-DNRF52840_XXAA {build.flags.usb}
+feather52840sense.build.ldscript=nrf52840_s140_v6.ld
+feather52840sense.build.vid=0x239A
+feather52840sense.build.pid=0x8087
+
+# SofDevice Menu
+feather52840sense.menu.softdevice.s140v6=S140 6.1.1
+feather52840sense.menu.softdevice.s140v6.build.sd_name=s140
+feather52840sense.menu.softdevice.s140v6.build.sd_version=6.1.1
+feather52840sense.menu.softdevice.s140v6.build.sd_fwid=0x00B6
+
+# Debug Menu
+feather52840sense.menu.debug.l0=Level 0 (Release)
+feather52840sense.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+feather52840sense.menu.debug.l1=Level 1 (Error Message)
+feather52840sense.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+feather52840sense.menu.debug.l2=Level 2 (Full Debug)
+feather52840sense.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+feather52840sense.menu.debug.l3=Level 3 (Segger SystemView)
+feather52840sense.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+feather52840sense.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
+
+
+# ---------------------------------------------
+# Bluefruit ItsyBitsy nRF52840 Express
+# ---------------------------------------------
+itsybitsy52840.name=Adafruit ItsyBitsy nRF52840 Express
+
+# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
+itsybitsy52840.vid.0=0x239A
+itsybitsy52840.pid.0=0x8051
+itsybitsy52840.vid.1=0x239A
+itsybitsy52840.pid.1=0x0051
+itsybitsy52840.vid.2=0x239A
+itsybitsy52840.pid.2=0x0052
+itsybitsy52840.vid.3=0x239A
+itsybitsy52840.pid.3=0x8052
+
+# Upload
+itsybitsy52840.bootloader.tool=bootburn
+itsybitsy52840.upload.tool=nrfutil
+itsybitsy52840.upload.protocol=nrfutil
+itsybitsy52840.upload.use_1200bps_touch=true
+itsybitsy52840.upload.wait_for_upload_port=true
+itsybitsy52840.upload.maximum_size=815104
+itsybitsy52840.upload.maximum_data_size=237568
+
+# Build
+itsybitsy52840.build.mcu=cortex-m4
+itsybitsy52840.build.f_cpu=64000000
+itsybitsy52840.build.board=NRF52840_ITSYBITSY
+itsybitsy52840.build.core=nRF5
+itsybitsy52840.build.variant=itsybitsy_nrf52840_express
+itsybitsy52840.build.usb_manufacturer="Adafruit LLC"
+itsybitsy52840.build.usb_product="ItsyBitsy nRF52840 Express"
+itsybitsy52840.build.extra_flags=-DNRF52840_XXAA -DARDUINO_NRF52_ITSYBITSY {build.flags.usb}
+itsybitsy52840.build.ldscript=nrf52840_s140_v6.ld
+itsybitsy52840.build.vid=0x239A
+itsybitsy52840.build.pid=0x8051
+
+# SofDevice Menu
+itsybitsy52840.menu.softdevice.s140v6=0.2.11 SoftDevice s140 6.1.1
+itsybitsy52840.menu.softdevice.s140v6.build.sd_name=s140
+itsybitsy52840.menu.softdevice.s140v6.build.sd_version=6.1.1
+itsybitsy52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
+
+# Debug Menu
+itsybitsy52840.menu.debug.l0=Level 0 (Release)
+itsybitsy52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+itsybitsy52840.menu.debug.l1=Level 1 (Error Message)
+itsybitsy52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+itsybitsy52840.menu.debug.l2=Level 2 (Full Debug)
+itsybitsy52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+itsybitsy52840.menu.debug.l3=Level 3 (Segger SystemView)
+itsybitsy52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+itsybitsy52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
+
+# ---------------------------------------------
+# Bluefruit Circuit Playground nRF52840 Express
+# ---------------------------------------------
+cplaynrf52840.name=Adafruit Circuit Playground Bluefruit
+
+# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
+cplaynrf52840.vid.0=0x239A
+cplaynrf52840.pid.0=0x8045
+cplaynrf52840.vid.1=0x239A
+cplaynrf52840.pid.1=0x0045
+cplaynrf52840.vid.2=0x239A
+cplaynrf52840.pid.2=0x0046
+cplaynrf52840.vid.3=0x239A
+cplaynrf52840.pid.3=0x8046
+
+# Upload
+cplaynrf52840.bootloader.tool=bootburn
+cplaynrf52840.upload.tool=nrfutil
+cplaynrf52840.upload.protocol=nrfutil
+cplaynrf52840.upload.use_1200bps_touch=true
+cplaynrf52840.upload.wait_for_upload_port=true
+cplaynrf52840.upload.maximum_size=815104
+cplaynrf52840.upload.maximum_data_size=237568
+
+# Build
+cplaynrf52840.build.mcu=cortex-m4
+cplaynrf52840.build.f_cpu=64000000
+cplaynrf52840.build.board=NRF52840_CIRCUITPLAY
+cplaynrf52840.build.core=nRF5
+cplaynrf52840.build.variant=circuitplayground_nrf52840
+cplaynrf52840.build.usb_manufacturer="Adafruit LLC"
+cplaynrf52840.build.usb_product="Circuit Playground Bluefruit"
+cplaynrf52840.build.extra_flags=-DNRF52840_XXAA {build.flags.usb}
+cplaynrf52840.build.ldscript=nrf52840_s140_v6.ld
+cplaynrf52840.build.vid=0x239A
+cplaynrf52840.build.pid=0x8045
+
+# SofDevice Menu
+cplaynrf52840.menu.softdevice.s140v6=S140 6.1.1
+cplaynrf52840.menu.softdevice.s140v6.build.sd_name=s140
+cplaynrf52840.menu.softdevice.s140v6.build.sd_version=6.1.1
+cplaynrf52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
+
+# Debug Menu
+cplaynrf52840.menu.debug.l0=Level 0 (Release)
+cplaynrf52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+cplaynrf52840.menu.debug.l1=Level 1 (Error Message)
+cplaynrf52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+cplaynrf52840.menu.debug.l2=Level 2 (Full Debug)
+cplaynrf52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+cplaynrf52840.menu.debug.l3=Level 3 (Segger SystemView)
+cplaynrf52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+cplaynrf52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
+
+
+# ---------------------------------------------
+# Clue nRF52840
+# ---------------------------------------------
+cluenrf52840.name=Adafruit CLUE
+
+# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
+cluenrf52840.vid.0=0x239A
+cluenrf52840.pid.0=0x8072
+cluenrf52840.vid.1=0x239A
+cluenrf52840.pid.1=0x0072
+cluenrf52840.vid.2=0x239A
+cluenrf52840.pid.2=0x0071
+cluenrf52840.vid.3=0x239A
+cluenrf52840.pid.3=0x8071
+
+# Upload
+cluenrf52840.bootloader.tool=bootburn
+cluenrf52840.upload.tool=nrfutil
+cluenrf52840.upload.protocol=nrfutil
+cluenrf52840.upload.use_1200bps_touch=true
+cluenrf52840.upload.wait_for_upload_port=true
+cluenrf52840.upload.maximum_size=815104
+cluenrf52840.upload.maximum_data_size=237568
+
+# Build
+cluenrf52840.build.mcu=cortex-m4
+cluenrf52840.build.f_cpu=64000000
+cluenrf52840.build.board=NRF52840_CLUE
+cluenrf52840.build.core=nRF5
+cluenrf52840.build.variant=clue_nrf52840
+cluenrf52840.build.usb_manufacturer="Adafruit LLC"
+cluenrf52840.build.usb_product="CLUE"
+cluenrf52840.build.extra_flags=-DNRF52840_XXAA {build.flags.usb}
+cluenrf52840.build.ldscript=nrf52840_s140_v6.ld
+cluenrf52840.build.vid=0x239A
+cluenrf52840.build.pid=0x8071
+
+# SofDevice Menu
+cluenrf52840.menu.softdevice.s140v6=S140 6.1.1
+cluenrf52840.menu.softdevice.s140v6.build.sd_name=s140
+cluenrf52840.menu.softdevice.s140v6.build.sd_version=6.1.1
+cluenrf52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
+
+# Debug Menu
+cluenrf52840.menu.debug.l0=Level 0 (Release)
+cluenrf52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+cluenrf52840.menu.debug.l1=Level 1 (Error Message)
+cluenrf52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+cluenrf52840.menu.debug.l2=Level 2 (Full Debug)
+cluenrf52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+cluenrf52840.menu.debug.l3=Level 3 (Segger SystemView)
+cluenrf52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+cluenrf52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
+
+# ----------------------------------
+# Metro nRF52840 Express
+# ----------------------------------
+metro52840.name=Adafruit Metro nRF52840 Express
+
+# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
+metro52840.vid.0=0x239A
+metro52840.pid.0=0x803F
+metro52840.vid.1=0x239A
+metro52840.pid.1=0x003F
+metro52840.vid.2=0x239A
+metro52840.pid.2=0x0040
+metro52840.vid.3=0x239A
+metro52840.pid.3=0x8040
+
+# Upload
+metro52840.bootloader.tool=bootburn
+metro52840.upload.tool=nrfutil
+metro52840.upload.protocol=nrfutil
+metro52840.upload.use_1200bps_touch=true
+metro52840.upload.wait_for_upload_port=true
+metro52840.upload.maximum_size=815104
+metro52840.upload.maximum_data_size=237568
+
+# Build
+metro52840.build.mcu=cortex-m4
+metro52840.build.f_cpu=64000000
+metro52840.build.board=NRF52840_METRO
+metro52840.build.core=nRF5
+metro52840.build.variant=metro_nrf52840_express
+metro52840.build.usb_manufacturer="Adafruit LLC"
+metro52840.build.usb_product="Metro nRF52840 Express"
+metro52840.build.extra_flags=-DNRF52840_XXAA {build.flags.usb}
+metro52840.build.ldscript=nrf52840_s140_v6.ld
+metro52840.build.vid=0x239A
+metro52840.build.pid=0x803F
+
+# SofDevice Menu
+metro52840.menu.softdevice.s140v6=S140 6.1.1
+metro52840.menu.softdevice.s140v6.build.sd_name=s140
+metro52840.menu.softdevice.s140v6.build.sd_version=6.1.1
+metro52840.menu.softdevice.s140v6.build.sd_fwid=0x00B6
+
+# Debug Menu
+metro52840.menu.debug.l0=Level 0 (Release)
+metro52840.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+metro52840.menu.debug.l1=Level 1 (Error Message)
+metro52840.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+metro52840.menu.debug.l2=Level 2 (Full Debug)
+metro52840.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+metro52840.menu.debug.l3=Level 3 (Segger SystemView)
+metro52840.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+metro52840.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
+
+
+
+
+# -------------------------------------------------------
+# 
+# Boards that aren't made by Adafruit
+#
+# -------------------------------------------------------
+
+
+# ----------------------------------
+# Nordic nRF52840DK (PCA10056)
+# ----------------------------------
+pca10056.name=Nordic nRF52840DK (PCA10056)
+pca10056.bootloader.tool=bootburn
+
+# Upload
+pca10056.upload.tool=nrfutil
+pca10056.upload.protocol=nrfutil
+pca10056.upload.use_1200bps_touch=true
+pca10056.upload.wait_for_upload_port=true
+pca10056.upload.maximum_size=815104
+pca10056.upload.maximum_data_size=237568
+
+# Build
+pca10056.build.mcu=cortex-m4
+pca10056.build.f_cpu=64000000
+pca10056.build.board=NRF52840_PCA10056
+pca10056.build.core=nRF5
+pca10056.build.variant=pca10056
+pca10056.build.usb_manufacturer="Nordic"
+pca10056.build.usb_product="nRF52840 DK"
+pca10056.build.extra_flags=-DNRF52840_XXAA {build.flags.usb}
+pca10056.build.ldscript=nrf52840_s140_v6.ld
+pca10056.build.vid=0x239A
+pca10056.build.pid=0x8029
+
+# SofDevice Menu
+pca10056.menu.softdevice.s140v6=S140 6.1.1
+pca10056.menu.softdevice.s140v6.build.sd_name=s140
+pca10056.menu.softdevice.s140v6.build.sd_version=6.1.1
+pca10056.menu.softdevice.s140v6.build.sd_fwid=0x00B6
+
+# Debug Menu
+pca10056.menu.debug.l0=Level 0 (Release)
+pca10056.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+pca10056.menu.debug.l1=Level 1 (Error Message)
+pca10056.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+pca10056.menu.debug.l2=Level 2 (Full Debug)
+pca10056.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+pca10056.menu.debug.l3=Level 3 (Segger SystemView)
+pca10056.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+pca10056.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
+
+# ----------------------------------
+# Particle Xenon
+# ----------------------------------
+particle_xenon.name=Particle Xenon
+
+# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
+particle_xenon.vid.0=0x239A
+particle_xenon.pid.0=0x8029
+particle_xenon.vid.1=0x239A
+particle_xenon.pid.1=0x0029
+particle_xenon.vid.2=0x239A
+particle_xenon.pid.2=0x002A
+particle_xenon.vid.3=0x239A
+particle_xenon.pid.3=0x802A
+
+# Upload
+particle_xenon.bootloader.tool=bootburn
+particle_xenon.upload.tool=nrfutil
+particle_xenon.upload.protocol=nrfutil
+particle_xenon.upload.use_1200bps_touch=true
+particle_xenon.upload.wait_for_upload_port=true
+particle_xenon.upload.maximum_size=815104
+particle_xenon.upload.maximum_data_size=237568
+
+# Build
+particle_xenon.build.mcu=cortex-m4
+particle_xenon.build.f_cpu=64000000
+particle_xenon.build.board=PARTICLE_XENON
+particle_xenon.build.core=nRF5
+particle_xenon.build.variant=particle_xenon
+particle_xenon.build.usb_manufacturer="Particle Industries"
+particle_xenon.build.usb_product="Particle Xenon"
+particle_xenon.build.extra_flags=-DNRF52840_XXAA {build.flags.usb}
+particle_xenon.build.ldscript=nrf52840_s140_v6.ld
+particle_xenon.build.vid=0x239A
+particle_xenon.build.pid=0x8029
+
+# SofDevice Menu
+particle_xenon.menu.softdevice.s140v6=S140 6.1.1
+particle_xenon.menu.softdevice.s140v6.build.sd_name=s140
+particle_xenon.menu.softdevice.s140v6.build.sd_version=6.1.1
+particle_xenon.menu.softdevice.s140v6.build.sd_fwid=0x00B6
+
+# Debug Menu
+particle_xenon.menu.debug.l0=Level 0 (Release)
+particle_xenon.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+particle_xenon.menu.debug.l1=Level 1 (Error Message)
+particle_xenon.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+particle_xenon.menu.debug.l2=Level 2 (Full Debug)
+particle_xenon.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+particle_xenon.menu.debug.l3=Level 3 (Segger SystemView)
+particle_xenon.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+particle_xenon.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
+
+# ----------------------------------
+# Raytac MDBT50Q - RX
+# ----------------------------------
+mdbt50qrx.name=Raytac MDBT50Q-RX Dongle
+
+# VID/PID for bootloader, Arduino + Circuitpython App
+mdbt50qrx.vid.0=0x239A
+mdbt50qrx.pid.0=0x810B
+mdbt50qrx.vid.1=0x239A
+mdbt50qrx.pid.1=0x010B
+mdbt50qrx.vid.2=0x239A
+mdbt50qrx.pid.2=0x810C
+
+# Upload
+mdbt50qrx.bootloader.tool=bootburn
+mdbt50qrx.upload.tool=nrfutil
+mdbt50qrx.upload.protocol=nrfutil
+mdbt50qrx.upload.use_1200bps_touch=true
+mdbt50qrx.upload.wait_for_upload_port=true
+mdbt50qrx.upload.maximum_size=815104
+mdbt50qrx.upload.maximum_data_size=237568
+
+# Build
+mdbt50qrx.build.mcu=cortex-m4
+mdbt50qrx.build.f_cpu=64000000
+mdbt50qrx.build.board=MDBT50Q_RX
+mdbt50qrx.build.core=nRF5
+mdbt50qrx.build.variant=raytac_mdbt50q_rx
+mdbt50qrx.build.usb_manufacturer="Raytac"
+mdbt50qrx.build.usb_product="nRF52840 Dongle"
+mdbt50qrx.build.extra_flags=-DNRF52840_XXAA {build.flags.usb}
+mdbt50qrx.build.ldscript=nrf52840_s140_v6.ld
+mdbt50qrx.build.vid=0x239A
+mdbt50qrx.build.pid=0x810B
+
+# SofDevice Menu
+mdbt50qrx.menu.softdevice.s140v6=S140 6.1.1
+mdbt50qrx.menu.softdevice.s140v6.build.sd_name=s140
+mdbt50qrx.menu.softdevice.s140v6.build.sd_version=6.1.1
+mdbt50qrx.menu.softdevice.s140v6.build.sd_fwid=0x00B6
+
+# Debug Menu
+mdbt50qrx.menu.debug.l0=Level 0 (Release)
+mdbt50qrx.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+mdbt50qrx.menu.debug.l1=Level 1 (Error Message)
+mdbt50qrx.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+mdbt50qrx.menu.debug.l2=Level 2 (Full Debug)
+mdbt50qrx.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+mdbt50qrx.menu.debug.l3=Level 3 (Segger SystemView)
+mdbt50qrx.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+mdbt50qrx.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
+
+# ----------------------------------
+# NINA B302
+# ----------------------------------
+ninab302.name=NINA B302 ublox 
+
+# VID/PID for bootloader with/without UF2, Arduino + Circuitpython App
+ninab302.vid.0=0x239A
+ninab302.pid.0=0x8029
+ninab302.vid.1=0x239A
+ninab302.pid.1=0x0029
+ninab302.vid.2=0x7239A
+ninab302.pid.2=0x002A
+ninab302.vid.3=0x239A
+ninab302.pid.3=0x802A
+
+# Upload
+ninab302.bootloader.tool=bootburn
+ninab302.upload.tool=nrfutil
+ninab302.upload.protocol=nrfutil
+ninab302.upload.use_1200bps_touch=true
+ninab302.upload.wait_for_upload_port=true
+ninab302.upload.maximum_size=815104
+ninab302.upload.maximum_data_size=237568
+
+# Build
+ninab302.build.mcu=cortex-m4
+ninab302.build.f_cpu=64000000
+ninab302.build.board=NINA_B302_ublox
+ninab302.build.core=nRF5
+ninab302.build.variant=NINA_B302_ublox
+ninab302.build.usb_manufacturer="Nordic"
+ninab302.build.usb_product="NINA B302 ublox"
+ninab302.build.extra_flags=-DNRF52840_XXAA -DNINA_B302_ublox {build.flags.usb}
+ninab302.build.ldscript=nrf52840_s140_v6.ld
+ninab302.build.vid=0x239A
+ninab302.build.pid=0x8029
+
+# SofDevice Menu
+ninab302.menu.softdevice.s140v6=0.3.2 SoftDevice s140 6.1.1
+ninab302.menu.softdevice.s140v6.build.sd_name=s140
+ninab302.menu.softdevice.s140v6.build.sd_version=6.1.1
+ninab302.menu.softdevice.s140v6.build.sd_fwid=0x00B6
+
+# Debug Menu
+ninab302.menu.debug.l0=Level 0 (Release)
+ninab302.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+ninab302.menu.debug.l1=Level 1 (Error Message)
+ninab302.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+ninab302.menu.debug.l2=Level 2 (Full Debug)
+ninab302.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+ninab302.menu.debug.l3=Level 3 (Segger SystemView)
+ninab302.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+ninab302.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
+
+# ----------------------------------
+# NINA B112
+# ----------------------------------
+ninab112.name=NINA B112 ublox 
+ninab112.bootloader.tool=bootburn
+
+# Upload
+ninab112.upload.tool=nrfutil
+ninab112.upload.protocol=nrfutil
+ninab112.upload.use_1200bps_touch=false
+ninab112.upload.wait_for_upload_port=false
+ninab112.upload.native_usb=false
+ninab112.upload.maximum_size=290816
+ninab112.upload.maximum_data_size=52224
+
+# Build
+ninab112.build.mcu=cortex-m4
+ninab112.build.f_cpu=64000000
+ninab112.build.board=NINA_B112_ublox
+ninab112.build.core=nRF5
+ninab112.build.variant=NINA_B112_ublox
+feather52840.build.usb_manufacturer="Adafruit LLC"
+feather52840.build.usb_product="Feather nRF52832"
+ninab112.build.extra_flags=-DNRF52832_XXAA -DNINA_B112_ublox -DNRF52
+ninab112.build.ldscript=nrf52832_s132_v6.ld
+
+# SofDevice Menu
+ninab112.menu.softdevice.s132v6=0.3.2 SoftDevice s132 6.1.1
+ninab112.menu.softdevice.s132v6.build.sd_name=s132
+ninab112.menu.softdevice.s132v6.build.sd_version=6.1.1
+ninab112.menu.softdevice.s132v6.build.sd_fwid=0x00B7
+
+# Debug Menu
+ninab112.menu.debug.l0=Level 0 (Release)
+ninab112.menu.debug.l0.build.debug_flags=-DCFG_DEBUG=0
+ninab112.menu.debug.l1=Level 1 (Error Message)
+ninab112.menu.debug.l1.build.debug_flags=-DCFG_DEBUG=1
+ninab112.menu.debug.l2=Level 2 (Full Debug)
+ninab112.menu.debug.l2.build.debug_flags=-DCFG_DEBUG=2
+ninab112.menu.debug.l3=Level 3 (Segger SystemView)
+ninab112.menu.debug.l3.build.debug_flags=-DCFG_DEBUG=3
+ninab112.menu.debug.l3.build.sysview_flags=-DCFG_SYSVIEW=1
@@ -0,0 +1,92 @@
+/*
+ *  Udp.cpp: Library to send/receive UDP packets.
+ *
+ * NOTE: UDP is fast, but has some important limitations (thanks to Warren Gray for mentioning these)
+ * 1) UDP does not guarantee the order in which assembled UDP packets are received. This
+ * might not happen often in practice, but in larger network topologies, a UDP
+ * packet can be received out of sequence.
+ * 2) UDP does not guard against lost packets - so packets *can* disappear without the sender being
+ * aware of it. Again, this may not be a concern in practice on small local networks.
+ * For more information, see http://www.cafeaulait.org/course/week12/35.html
+ *
+ * MIT License:
+ * Copyright (c) 2008 Bjoern Hartmann
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * bjoern@cs.stanford.edu 12/30/2008
+ */
+
+#ifndef udp_h
+#define udp_h
+
+#include <Stream.h>
+#include <IPAddress.h>
+
+class UDP : public Stream {
+
+public:
+  virtual uint8_t begin(uint16_t) =0;	// initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use
+  
+  // KH, add virtual function to support Multicast, necessary for many services (MDNS, UPnP, etc.)
+  virtual uint8_t beginMulticast(IPAddress, uint16_t) { return 0; }  // initialize, start listening on specified multicast IP address and port. Returns 1 if successful, 0 on failure
+  
+  virtual void stop() =0;  // Finish with the UDP socket
+
+  // Sending UDP packets
+
+  // Start building up a packet to send to the remote host specific in ip and port
+  // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port
+  virtual int beginPacket(IPAddress ip, uint16_t port) =0;
+  // Start building up a packet to send to the remote host specific in host and port
+  // Returns 1 if successful, 0 if there was a problem resolving the hostname or port
+  virtual int beginPacket(const char *host, uint16_t port) =0;
+  // Finish off this packet and send it
+  // Returns 1 if the packet was sent successfully, 0 if there was an error
+  virtual int endPacket() =0;
+  // Write a single byte into the packet
+  virtual size_t write(uint8_t) =0;
+  // Write size bytes from buffer into the packet
+  virtual size_t write(const uint8_t *buffer, size_t size) =0;
+
+  // Start processing the next available incoming packet
+  // Returns the size of the packet in bytes, or 0 if no packets are available
+  virtual int parsePacket() =0;
+  // Number of bytes remaining in the current packet
+  virtual int available() =0;
+  // Read a single byte from the current packet
+  virtual int read() =0;
+  // Read up to len bytes from the current packet and place them into buffer
+  // Returns the number of bytes read, or 0 if none are available
+  virtual int read(unsigned char* buffer, size_t len) =0;
+  // Read up to len characters from the current packet and place them into buffer
+  // Returns the number of characters read, or 0 if none are available
+  virtual int read(char* buffer, size_t len) =0;
+  // Return the next byte from the current packet without moving on to the next byte
+  virtual int peek() =0;
+  virtual void flush() =0;	// Finish reading the current packet
+
+  // Return the IP address of the host who sent the current incoming packet
+  virtual IPAddress remoteIP() =0;
+  // Return the port of the host who sent the current incoming packet
+  virtual uint16_t remotePort() =0;
+protected:
+  uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); };
+};
+
+#endif
@@ -0,0 +1,167 @@
+# Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+# Copyright (c) 2016 Sandeep Mistry All right reserved.
+# Copyright (c) 2017 Adafruit Industries.  All rights reserved.
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+name=Adafruit nRF52 Boards
+version=1.0.0
+
+# Compile variables
+# -----------------
+
+compiler.warning_flags=-w
+compiler.warning_flags.none=-w
+compiler.warning_flags.default=
+compiler.warning_flags.more=-Wall
+compiler.warning_flags.all=-Wall -Wextra -Wno-unused-parameter -Wno-missing-field-initializers -Wno-pointer-arith
+
+# Allow changing optimization settings via platform.local.txt / boards.local.txt
+compiler.optimization_flag=-Ofast
+
+compiler.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
+compiler.c.cmd=arm-none-eabi-gcc
+compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.warning_flags} {build.float_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD
+
+# KH, Error here to use gcc, must use g++
+#compiler.c.elf.cmd=arm-none-eabi-gcc
+compiler.c.elf.cmd=arm-none-eabi-g++
+
+compiler.c.elf.flags={compiler.optimization_flag} -Wl,--gc-sections -save-temps
+compiler.S.cmd=arm-none-eabi-gcc
+compiler.S.flags=-mcpu={build.mcu} -mthumb -mabi=aapcs {compiler.optimization_flag} -g -c {build.float_flags} -x assembler-with-cpp
+
+compiler.cpp.cmd=arm-none-eabi-g++
+compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g {compiler.warning_flags} {build.float_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD
+compiler.ar.cmd=arm-none-eabi-ar
+compiler.ar.flags=rcs
+compiler.objcopy.cmd=arm-none-eabi-objcopy
+compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
+compiler.elf2bin.flags=-O binary
+compiler.elf2bin.cmd=arm-none-eabi-objcopy
+compiler.elf2hex.flags=-O ihex
+compiler.elf2hex.cmd=arm-none-eabi-objcopy
+compiler.ldflags=-mcpu={build.mcu} -mthumb {build.float_flags} -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align --specs=nano.specs --specs=nosys.specs
+compiler.size.cmd=arm-none-eabi-size
+
+# this can be overriden in boards.txt
+build.float_flags=-mfloat-abi=hard -mfpu=fpv4-sp-d16 -u _printf_float
+build.debug_flags=-DCFG_DEBUG=0
+build.logger_flags=-DCFG_LOGGER=1
+build.sysview_flags=-DCFG_SYSVIEW=0
+
+# USB flags
+build.flags.usb= -DUSBCON -DUSE_TINYUSB -DUSB_VID={build.vid} -DUSB_PID={build.pid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'
+
+# These can be overridden in platform.local.txt
+compiler.c.extra_flags=
+compiler.c.elf.extra_flags=
+compiler.cpp.extra_flags=
+compiler.S.extra_flags=
+compiler.ar.extra_flags=
+compiler.libraries.ldflags=
+compiler.elf2bin.extra_flags=
+compiler.elf2hex.extra_flags=
+
+compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-5.7.0.path}/CMSIS/Core/Include/" "-I{runtime.tools.CMSIS-5.7.0.path}/CMSIS/DSP/Include/"
+compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-5.7.0.path}/CMSIS/DSP/Lib/GCC/" -larm_cortexM4lf_math
+
+# common compiler for nrf
+rtos.path={build.core.path}/freertos
+nordic.path={build.core.path}/nordic
+
+# build.logger_flags and build.sysview_flags are intentionally empty,
+# to allow modification via a user's own boards.local.txt or platform.local.txt files.
+build.flags.nrf= -DSOFTDEVICE_PRESENT -DARDUINO_NRF52_ADAFRUIT -DNRF52_SERIES -DDX_CC_TEE -DLFS_NAME_MAX=64 {compiler.optimization_flag} {build.debug_flags} {build.logger_flags} {build.sysview_flags} {compiler.arm.cmsis.c.flags} "-I{nordic.path}" "-I{nordic.path}/nrfx" "-I{nordic.path}/nrfx/hal" "-I{nordic.path}/nrfx/mdk" "-I{nordic.path}/nrfx/soc" "-I{nordic.path}/nrfx/drivers/include" "-I{nordic.path}/nrfx/drivers/src" "-I{nordic.path}/softdevice/{build.sd_name}_nrf52_{build.sd_version}_API/include" "-I{nordic.path}/softdevice/{build.sd_name}_nrf52_{build.sd_version}_API/include/nrf52" "-I{rtos.path}/Source/include" "-I{rtos.path}/config" "-I{rtos.path}/portable/GCC/nrf52" "-I{rtos.path}/portable/CMSIS/nrf52" "-I{build.core.path}/sysview/SEGGER" "-I{build.core.path}/sysview/Config" "-I{runtime.platform.path}/libraries/Adafruit_TinyUSB_Arduino/src/arduino"
+
+# Compile patterns
+# ----------------
+
+## Compile c files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.c.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
+
+## Compile c++ files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} '-DARDUINO_BSP_VERSION="{version}"' {compiler.cpp.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
+
+## Compile S files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {build.flags.nrf} {includes} "{source_file}" -o "{object_file}"
+
+## Create archives
+recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
+
+## Combine gc-sections, archives, and objects
+recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-L{build.core.path}/linker" "-T{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} -Wl,--start-group {compiler.arm.cmsis.ldflags} -lm "{build.path}/{archive_file}" {compiler.libraries.ldflags} -Wl,--end-group
+
+## Create output (bin file)
+#recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2bin.cmd}" {compiler.elf2bin.flags} {compiler.elf2bin.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
+
+## Create output (hex file)
+recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
+
+## Create dfu package zip file
+recipe.objcopy.zip.pattern="{tools.nrfutil.cmd}" dfu genpkg --dev-type 0x0052 --sd-req {build.sd_fwid} --application "{build.path}/{build.project_name}.hex" "{build.path}/{build.project_name}.zip"
+
+## Create uf2 file
+#recipe.objcopy.uf2.pattern=python "{runtime.platform.path}/tools/uf2conv/uf2conv.py" -f 0xADA52840 -c -o "{build.path}/{build.project_name}.uf2" "{build.path}/{build.project_name}.hex"
+
+## Save bin
+recipe.output.tmp_file_bin={build.project_name}.bin
+recipe.output.save_file_bin={build.project_name}.save.bin
+
+## Save hex
+recipe.output.tmp_file_hex={build.project_name}.hex
+recipe.output.save_file_hexu={build.project_name}.save.hex
+
+## Compute size
+recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
+recipe.size.regex=^(?:\.text|\.data|)\s+([0-9]+).*
+recipe.size.regex.data=^(?:\.data|\.bss)\s+([0-9]+).*
+
+## Export Compiled Binary
+recipe.output.tmp_file={build.project_name}.hex
+recipe.output.save_file={build.project_name}.{build.variant}.hex
+
+#***************************************************
+# adafruit-nrfutil for uploading
+# https://github.com/adafruit/Adafruit_nRF52_nrfutil
+# pre-built binaries are provided for macos and windows
+#***************************************************
+tools.nrfutil.cmd=adafruit-nrfutil
+tools.nrfutil.cmd.windows={runtime.platform.path}/tools/adafruit-nrfutil/win32/adafruit-nrfutil.exe
+tools.nrfutil.cmd.macosx={runtime.platform.path}/tools/adafruit-nrfutil/macos/adafruit-nrfutil
+
+tools.nrfutil.upload.params.verbose=--verbose
+tools.nrfutil.upload.params.quiet=
+tools.nrfutil.upload.pattern="{cmd}" {upload.verbose} dfu serial -pkg "{build.path}/{build.project_name}.zip" -p {serial.port} -b 115200 --singlebank
+
+#***************************************************
+# Burning bootloader with either jlink or nrfutil
+#***************************************************
+
+# Bootloader version
+tools.bootburn.bootloader.file={runtime.platform.path}/bootloader/{build.variant}/{build.variant}_bootloader-0.6.1_{build.sd_name}_{build.sd_version}
+
+tools.bootburn.bootloader.params.verbose=
+tools.bootburn.bootloader.params.quiet=
+tools.bootburn.bootloader.pattern={program.burn_pattern}
+
+# erase flash page while programming
+tools.bootburn.erase.params.verbose=
+tools.bootburn.erase.params.quiet=
+tools.bootburn.erase.pattern=
+
@@ -0,0 +1,17 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+// API compatibility
+#include "variant.h"
@@ -0,0 +1,62 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 
+// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
+
+#include "variant.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+#include "nrf.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+  0, 
+  1, 
+  2, 
+  3, 
+  4, 
+  5, 
+  6, 
+  7, 
+  8, 
+  9, 
+  10,
+  11,
+  12,
+  13,
+  14,
+  15,
+  16, 
+  17, 
+  18, 
+  19, 
+  20, 
+  21, 
+  22, 
+  23, 
+  24, 
+  25, 
+  26,
+  27,
+  28,
+  29,
+  30,
+  31
+  };
+
@@ -0,0 +1,173 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_NINA_B112_UBLOX_
+#define _VARIANT_NINA_B112_UBLOX_
+
+#define NRF_CLOCK_LFCLKSRC {.source = NRF_CLOCK_LF_SRC_XTAL, \
+ .rc_ctiv = 0, \
+.rc_temp_ctiv = 0, \
+.xtal_accuracy = NRF_CLOCK_LF_XTAL_ACCURACY_20_PPM}
+
+/** Master clock frequency */
+#define VARIANT_MCK       (64000000ul)
+
+#define USE_LFXO      // Board uses 32khz crystal for LF
+// define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT           (32u)
+#define NUM_DIGITAL_PINS     (32u)
+#define NUM_ANALOG_INPUTS    (6u)
+#define NUM_ANALOG_OUTPUTS   (0u)
+
+// LEDs
+#define PIN_LED              LED1
+#define LED_BUILTIN          PIN_LED
+
+//LEDs onboard
+#define LED1 (8)  // Red
+#define LED2 (16) // Green/SW1
+#define LED3 (18) // Blue
+
+#define LED_STATE_ON         1         // State when LED is litted
+
+//Switch
+
+#define SW1 (16)
+#define SW2 (30)
+
+// NFC
+#define PIN_NFC_1	(9)  // P0.9
+#define PIN_NFC_2	(10) // P0.10
+
+/*
+ * Analog pins
+ */
+#define PIN_A0               (3) // P0.03
+#define PIN_A1               (2) // P0.02
+#define PIN_A2               (4) // P0.04
+#define PIN_A3               (30) // P0.30
+#define PIN_A4               (29) // P0.29
+#define PIN_A5               (28) // P0.28
+
+static const uint8_t A0  = PIN_A0 ;
+static const uint8_t A1  = PIN_A1 ;
+static const uint8_t A2  = PIN_A2 ;
+static const uint8_t A3  = PIN_A3 ;
+static const uint8_t A4  = PIN_A4 ;
+static const uint8_t A5  = PIN_A5 ;
+
+#define ADC_RESOLUTION    14
+
+#define PIN_D0               (5) // P0.05
+#define PIN_D1               (6) // P0.06
+#define PIN_D2               (7) // P0.07
+#define PIN_D3               (31) // P0.31
+#define PIN_D4               (18) // P0.18
+#define PIN_D6               (9) // P0.09
+#define PIN_D7               (10) // P0.10
+#define PIN_D9               (8) // P0.8
+#define PIN_D10              (11) // P0.11
+#define PIN_D11              (13) // P0.13
+#define PIN_D12              (12) // P0.12
+#define PIN_D13              (14) // P0.14
+#define PIN_D14              (2) // P0.02
+#define PIN_D15              (3) // P0.03
+
+static const uint8_t D0   = PIN_D0 ;
+static const uint8_t D1   = PIN_D1 ;
+static const uint8_t D2   = PIN_D2 ;
+static const uint8_t D3   = PIN_D3 ;
+static const uint8_t D4   = PIN_D4 ;
+static const uint8_t D6   = PIN_D6 ;
+static const uint8_t D7   = PIN_D7 ;
+static const uint8_t D9   = PIN_D9 ;
+static const uint8_t D10  = PIN_D10 ;
+static const uint8_t D11  = PIN_D11 ;
+static const uint8_t D12  = PIN_D12 ;
+static const uint8_t D13  = PIN_D13 ;
+static const uint8_t D14  = PIN_D14 ;
+static const uint8_t D15  = PIN_D15 ;
+
+// Other pins
+//static const uint8_t AREF = PIN_AREF;
+
+//#define PIN_AREF           (24)
+//#define PIN_VBAT           PIN_A7
+
+/*
+ * Serial interfaces
+ */
+//#define PIN_SERIAL_RX       (8)  //used for original Adafruit Bootloader
+//#define PIN_SERIAL_TX       (6)  //used for original Adafruit Bootloader
+
+#define PIN_SERIAL_RX       (5) // P0.05
+#define PIN_SERIAL_TX       (6) // P0.06
+#define PIN_SERIAL_CTS      (7) // P0.07
+#define PIN_SERIAL_RTS      (31) // P0.31
+#define PIN_SERIAL_DTR      (28) // P0.28
+#define PIN_SERIAL_DSR      (29) // P0.29
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO         (12) // P0.12
+#define PIN_SPI_MOSI         (13) // P0.13
+#define PIN_SPI_SCK          (14) // P0.14
+
+static const uint8_t SS   = 11 ;  // P0.11
+static const uint8_t MOSI = PIN_SPI_MOSI ;
+static const uint8_t MISO = PIN_SPI_MISO ;
+static const uint8_t SCK  = PIN_SPI_SCK ;
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA         (2) // P0.02
+#define PIN_WIRE_SCL         (3) // P0.03
+
+static const uint8_t SDA = PIN_WIRE_SDA;
+static const uint8_t SCL = PIN_WIRE_SCL;
+
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+
+#endif    //_VARIANT_NINA_B112_UBLOX_
@@ -0,0 +1,17 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+// API compatibility
+#include "variant.h"
@@ -0,0 +1,87 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 
+// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
+
+#include "variant.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+#include "nrf.h"
+
+const uint32_t g_ADigitalPinMap[] =
+{
+   // D0 .. D13
+  29,  // D0  is P0.29 (UART TX)
+  45,  // D1  is P1.13 (UART RX 
+  44,  // D2  is P1.12 (NFC2)
+  31,  // D3  is P0.31 (LED1)
+  13,  // D4  is P0.13 (LED2)
+  11,  // D5  is P0.11
+  9,   // D6  is P0.09
+  10,  // D7  is P0.10 (Button)
+  41,  // D8  is P1.09 
+  12,  // D9  is P0.12
+  14,  // D10 is P0.14
+  15,  // D11 is P0.15
+  32,  // D12 is P1.00
+  7,  // D13 is P0.07
+
+  // D14 .. D21 (aka A0 .. A5)
+  4,  // D14 is P0.04 (A0)
+  30,  // D15 is P0.30 (A1)
+  5,  // D16 is P0.05 (A2)
+  2,  // D17 is P0.02 (A3)
+  28,  // D18 is P0.28 (A4)
+  3,  // D19 is P0.03 (A5)
+
+  // D20 .. D21 (aka I2C pins)
+  16,  // D20 is P0.16 (SDA)
+  24,  // D21 is P0.24 (SCL)
+   
+  // QSPI pins (not exposed via any header / test point)
+  19,  // D22 is P0.19 (QSPI CLK)
+  17,  // D23 is P0.17 (QSPI CS)
+  20,  // D24 is P0.20 (QSPI Data 0)
+  21,  // D25 is P0.21 (QSPI Data 1)
+  22,  // D26 is P0.22 (QSPI Data 2)
+  26,  // D27 is P0.23 (QSPI Data 3)
+  
+  40,  // D28 is P1.08 - IO34
+  41,  // D29 is P1.01 - IO35
+  44,  // D30 is P1.02 - IO36
+  45,  // D31 is P1.03 - IO37
+  42, // D32 is P1.10 - IO38
+  43, // D33 is P1.11 - IO39
+  47, // D34 is P1.15 - IO40
+  46, // D35 is P1.14 - IO41 
+  26, // D36 is P0.26 - IO42
+  6,  // D37 is P0.6  - IO43
+  27, // D38 is P0.27 - IO44  
+};
+
+void initVariant()
+{
+  // LED1 & LED2
+  pinMode(PIN_LED1, OUTPUT);
+  ledOff(PIN_LED1);
+
+  pinMode(PIN_LED2, OUTPUT);
+  ledOff(PIN_LED2);
+}
@@ -0,0 +1,149 @@
+ /*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+// Thanks to great work of [Miguel Alexandre Wisintainer](https://github.com/tcpipchip). 
+// See [u-blox nina b](https://github.com/khoih-prog/WiFiNINA_Generic/issues/1)
+
+#ifndef _VARIANT_NINA_B302_UBLOX_
+#define _VARIANT_NINA_B302_UBLOX_
+
+/** Master clock frequency */
+#define VARIANT_MCK       (64000000ul)
+
+#define USE_LFXO      // Board uses 32khz crystal for LF
+// define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif // __cplusplus
+// Number of pins defined in PinDescription array
+#define PINS_COUNT           (40)
+#define NUM_DIGITAL_PINS     (34)
+#define NUM_ANALOG_INPUTS    (6) 
+#define NUM_ANALOG_OUTPUTS   (0)
+
+// LEDs
+#define PIN_LED1             (3)
+#define PIN_LED2             (4)
+
+#define LED_BUILTIN          PIN_LED1
+#define LED_CONN             PIN_LED2
+
+#define LED_RED              PIN_LED1
+#define LED_BLUE             PIN_LED2
+
+#define LED_STATE_ON         1         // State when LED is litted
+
+/*
+ * Buttons
+ */
+#define PIN_BUTTON1             (7)
+
+/*
+ * Analog pins
+ */
+#define PIN_A0               (14)
+#define PIN_A1               (15)
+#define PIN_A2               (16)
+#define PIN_A3               (17)
+#define PIN_A4               (18)
+#define PIN_A5               (19)
+
+#define D0                   (0)
+#define D1                   (1)
+#define D2                   (2)
+#define D3                   (3)
+#define D4                   (4)
+#define D5                   (5)
+#define D6                   (6)
+#define D7                   (7)
+#define D8                   (8)
+#define D9                   (9)
+#define D10                  (10)
+#define D11                  (11)
+#define D12                  (12)
+#define D13                  (13)
+
+static const uint8_t A0  = PIN_A0 ;
+static const uint8_t A1  = PIN_A1 ;
+static const uint8_t A2  = PIN_A2 ;
+static const uint8_t A3  = PIN_A3 ;
+static const uint8_t A4  = PIN_A4 ;
+static const uint8_t A5  = PIN_A5 ;
+
+#define ADC_RESOLUTION    14
+
+#define PIN_NFC1           (31)
+#define PIN_NFC2           (2)
+
+/*
+ * Serial interfaces
+ */
+#define PIN_SERIAL1_RX       (1)
+#define PIN_SERIAL1_TX       (0)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO         (22)    //24 original
+#define PIN_SPI_MOSI         (23)    //25 original
+#define PIN_SPI_SCK          (24)    //26 original
+
+static const uint8_t SS   = (13);
+static const uint8_t MOSI = PIN_SPI_MOSI;
+static const uint8_t MISO = PIN_SPI_MISO;
+static const uint8_t SCK  = PIN_SPI_SCK;
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA         (20)
+#define PIN_WIRE_SCL         (21)
+
+// QSPI Pins
+#define PIN_QSPI_SCK         22
+#define PIN_QSPI_CS          23
+#define PIN_QSPI_IO0         24
+#define PIN_QSPI_IO1         25
+#define PIN_QSPI_IO2         26
+#define PIN_QSPI_IO3         27
+
+// On-board QSPI Flash
+#define EXTERNAL_FLASH_DEVICES   GD25Q16C
+#define EXTERNAL_FLASH_USE_QSPI
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif    //_VARIANT_NINA_B302_UBLOX_
@@ -0,0 +1,226 @@
+# Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+# Arduino SAMD Core and platform.
+#
+# For more info:
+# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
+
+name=Adafruit SAMD (32-bits ARM Cortex-M0+ and Cortex-M4) Boards
+version=1.7.4
+
+# Compile variables
+# -----------------
+
+compiler.warning_flags=-w
+compiler.warning_flags.none=-w
+compiler.warning_flags.default=
+compiler.warning_flags.more=-Wall -Wno-expansion-to-defined
+compiler.warning_flags.all=-Wall -Wextra -Wno-expansion-to-defined
+
+compiler.path={runtime.tools.arm-none-eabi-gcc.path}/bin/
+compiler.c.cmd=arm-none-eabi-gcc
+compiler.c.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu11 -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -MMD -D__SKETCH_NAME__="""{build.project_name}"""
+compiler.c.elf.cmd=arm-none-eabi-g++
+compiler.c.elf.flags=-Os -Wl,--gc-sections -save-temps
+compiler.S.cmd=arm-none-eabi-gcc
+compiler.S.flags=-c -g -x assembler-with-cpp -MMD
+compiler.cpp.cmd=arm-none-eabi-g++
+compiler.cpp.flags=-mcpu={build.mcu} -mthumb -c -g -Os {compiler.warning_flags} -std=gnu++11 -ffunction-sections -fdata-sections -fno-threadsafe-statics -nostdlib --param max-inline-insns-single=500 -fno-rtti -fno-exceptions -MMD -D__SKETCH_NAME__="""{build.project_name}"""
+compiler.ar.cmd=arm-none-eabi-ar
+compiler.ar.flags=rcs
+compiler.objcopy.cmd=arm-none-eabi-objcopy
+compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
+compiler.elf2hex.bin.flags=-O binary
+compiler.elf2hex.hex.flags=-O ihex -R .eeprom
+compiler.elf2hex.cmd=arm-none-eabi-objcopy
+compiler.ldflags=-mcpu={build.mcu} -mthumb -Wl,--cref -Wl,--check-sections -Wl,--gc-sections -Wl,--unresolved-symbols=report-all -Wl,--warn-common -Wl,--warn-section-align
+compiler.size.cmd=arm-none-eabi-size
+compiler.define=-DARDUINO=
+compiler.readelf.cmd=arm-none-eabi-readelf
+
+# this can be overriden in boards.txt
+build.extra_flags=
+build.cache_flags=
+build.flags.optimize=
+build.flags.maxspi=
+build.flags.maxqspi=
+build.flags.usbstack=
+build.flags.debug=
+
+# These can be overridden in platform.local.txt
+compiler.c.extra_flags=
+compiler.c.elf.extra_flags=
+#compiler.c.elf.extra_flags=-v
+compiler.cpp.extra_flags=
+compiler.S.extra_flags=
+compiler.ar.extra_flags=
+compiler.elf2hex.extra_flags=
+
+compiler.arm.cmsis.c.flags="-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Core/Include/" "-I{runtime.tools.CMSIS-5.4.0.path}/CMSIS/DSP/Include/" "-I{runtime.tools.CMSIS-Atmel-1.2.2.path}/CMSIS/Device/ATMEL/"
+compiler.arm.cmsis.ldflags="-L{runtime.tools.CMSIS-5.4.0.path}/CMSIS/Lib/GCC/" -larm_cortexM0l_math
+
+compiler.libraries.ldflags=
+
+# USB Flags
+# ---------
+build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} -DUSBCON -DUSB_CONFIG_POWER={build.usb_power} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}' {build.flags.usbstack} {build.flags.debug} "-I{runtime.platform.path}/libraries/Adafruit_TinyUSB_Arduino/src/arduino"
+
+# Default advertised device power setting in mA
+build.usb_power=100
+
+# Default usb manufacturer will be replaced at compile time using
+# numeric vendor ID if available or by board's specific value.
+build.usb_manufacturer="Unknown"
+
+
+# Compile patterns
+# ----------------
+
+## Compile c files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} -DARDUINO_SAMD_ADAFRUIT {compiler.c.extra_flags} {build.extra_flags} {build.cache_flags}  {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
+
+## Compile c++ files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} -DARDUINO_SAMD_ADAFRUIT {compiler.cpp.extra_flags} {build.extra_flags} {build.cache_flags} {build.flags.debug} {build.flags.optimize} {build.flags.maxspi} {build.flags.maxqspi} {build.extra_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
+
+## Compile S files
+## KH Add -DBOARD_NAME="{build.board}"
+recipe.S.o.pattern="{compiler.path}{compiler.S.cmd}" {compiler.S.flags} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DBOARD_NAME="{build.board}" -DARDUINO_ARCH_{build.arch} -DARDUINO_SAMD_ADAFRUIT {compiler.S.extra_flags} {build.extra_flags} {build.cache_flags} {compiler.arm.cmsis.c.flags} {includes} "{source_file}" -o "{object_file}"
+
+## Create archives
+# archive_file_path is needed for backwards compatibility with IDE 1.6.5 or older, IDE 1.6.6 or newer overrides this value
+archive_file_path={build.path}/{archive_file}
+recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{archive_file_path}" "{object_file}"
+
+## Combine gc-sections, archives, and objects
+recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}"  "-L{build.path}" {compiler.c.elf.flags} {compiler.c.elf.extra_flags} "-T{build.variant.path}/{build.ldscript}" "-Wl,-Map,{build.path}/{build.project_name}.map" --specs=nano.specs --specs=nosys.specs {compiler.ldflags} -o "{build.path}/{build.project_name}.elf" {object_files} {compiler.libraries.ldflags} -Wl,--start-group {compiler.arm.cmsis.ldflags} "-L{build.variant.path}" -lm "{build.path}/{archive_file}" -Wl,--end-group
+
+## Create output (bin file)
+recipe.objcopy.bin.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.bin.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.bin"
+
+## Create output (hex file)
+recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
+
+build.preferred_out_format=bin
+
+## Save hex
+recipe.output.tmp_file={build.project_name}.{build.preferred_out_format}
+recipe.output.save_file={build.project_name}.{build.variant}.{build.preferred_out_format}
+
+## Compute size
+recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
+recipe.size.regex=\.text\s+([0-9]+).*
+
+#
+# BOSSA
+#
+tools.bossac.path={runtime.tools.bossac-1.7.0-arduino3.path}
+tools.bossac.cmd=bossac
+tools.bossac.cmd.windows=bossac.exe
+
+tools.bossac.upload.params.verbose=-i -d
+tools.bossac.upload.params.quiet=
+tools.bossac.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U {upload.native_usb} -i -e -w -v "{build.path}/{build.project_name}.bin" -R
+
+tools.bossac_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
+
+tools.bossac.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.bossac.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+
+# v1.8.0
+
+tools.bossac18.path={runtime.tools.bossac-1.8.0-48-gb176eee.path}
+tools.bossac18.cmd=bossac
+
+tools.bossac18.upload.params.verbose=-i -d
+tools.bossac18.upload.params.quiet=
+tools.bossac18.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -U -i --offset={upload.offset} -w -v "{build.path}/{build.project_name}.bin" -R
+
+tools.bossac18.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.bossac18.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+
+#
+# BOSSA (ignore binary size)
+#
+tools.bossacI.path={runtime.tools.bossac-1.7.0-arduino3.path}
+tools.bossacI.cmd=bossac
+tools.bossacI.cmd.windows=bossac.exe
+
+tools.bossacI.upload.params.verbose=-i -d
+tools.bossacI.upload.params.quiet=
+tools.bossacI.upload.pattern="{path}/{cmd}" {upload.verbose} --port={serial.port.file} -I -U {upload.native_usb} -i -e -w "{build.path}/{build.project_name}.bin" -R
+
+tools.bossacI_remote.upload.pattern=/usr/bin/run-bossac {upload.verbose} --port=ttyATH0 -U {upload.native_usb} -e -w -v /tmp/sketch.bin -R
+
+tools.bossacI.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.bossacI.upload.network_pattern="{network_cmd}" -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+
+
+#
+# OpenOCD sketch upload
+#
+
+tools.openocd.path={runtime.tools.openocd-0.10.0-arduino7.path}
+tools.openocd.cmd=bin/openocd
+tools.openocd.cmd.windows=bin/openocd.exe
+
+tools.openocd.upload.params.verbose=-d2
+tools.openocd.upload.params.quiet=-d0
+tools.openocd.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset 0x2000; shutdown"
+
+tools.openocd.network_cmd={runtime.tools.arduinoOTA.path}/bin/arduinoOTA
+tools.openocd.upload.network_pattern={network_cmd} -address {serial.port} -port 65280 -username arduino -password "{network.password}" -sketch "{build.path}/{build.project_name}.bin" -upload /sketch -b
+
+# Program flashes the binary at 0x0000, so use the linker script without_bootloader
+tools.openocd.program.params.verbose=-d2
+tools.openocd.program.params.quiet=-d0
+tools.openocd.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
+
+tools.openocd.erase.params.verbose=-d3
+tools.openocd.erase.params.quiet=-d0
+tools.openocd.erase.pattern=
+
+tools.openocd.bootloader.params.verbose=-d2
+tools.openocd.bootloader.params.quiet=-d0
+tools.openocd.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
+
+#
+# OpenOCD sketch upload - version with configurable bootloader size
+# FIXME: this programmer is a workaround for default options being overwritten by uploadUsingPreferences
+#
+
+tools.openocd-withbootsize.path={runtime.tools.openocd-0.10.0-arduino7.path}
+tools.openocd-withbootsize.cmd=bin/openocd
+tools.openocd-withbootsize.cmd.windows=bin/openocd.exe
+
+tools.openocd-withbootsize.upload.params.verbose=-d2
+tools.openocd-withbootsize.upload.params.quiet=-d0
+tools.openocd-withbootsize.upload.pattern="{path}/{cmd}" {upload.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.bin} verify reset {bootloader.size}; shutdown"
+
+# Program flashes the binary at 0x0000, so use the linker script without_bootloader
+tools.openocd-withbootsize.program.params.verbose=-d2
+tools.openocd-withbootsize.program.params.quiet=-d0
+tools.openocd-withbootsize.program.pattern="{path}/{cmd}" {program.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; program {{build.path}/{build.project_name}.elf} verify reset; shutdown"
+
+tools.openocd-withbootsize.erase.params.verbose=-d3
+tools.openocd-withbootsize.erase.params.quiet=-d0
+tools.openocd-withbootsize.erase.pattern=
+
+tools.openocd-withbootsize.bootloader.params.verbose=-d2
+tools.openocd-withbootsize.bootloader.params.quiet=-d0
+tools.openocd-withbootsize.bootloader.pattern="{path}/{cmd}" {bootloader.verbose} -s "{path}/share/openocd/scripts/" -f "{runtime.platform.path}/variants/{build.variant}/{build.openocdscript}" -c "telnet_port disabled; init; halt; at91samd bootloader 0; program {{runtime.platform.path}/bootloaders/{bootloader.file}} verify reset; shutdown"
@@ -17,52 +17,15 @@
  * [Supports](#supports)
  * [Principles of operation](#principles-of-operation)
  * [Currently supported Boards](#currently-supported-boards)
-* [Changelog](#changelog)
-  * [Releases v1.3.0](#releases-v130)
-  * [Releases v1.2.0](#releases-v120)
-  * [Releases v1.1.5](#releases-v115)
-  * [Releases v1.1.4](#releases-v114)
-  * [Releases v1.1.3](#releases-v113)
-  * [Releases v1.1.2](#releases-v112)
-  * [Releases v1.1.1](#releases-v111)
-  * [Releases v1.1.0](#releases-v110)
-  * [Releases v1.0.2](#releases-v102)
-  * [Releases v1.0.1](#releases-v101)
-  * [Releases v1.0.0](#releases-v100)
-* [AsyncHTTPRequest_Generic for ESP32, ESP8266 using built-in WiFi and STM32 boards using built-in LAN8742A Ethernet](#asynchttprequest_generic-for-esp32-esp8266-using-built-in-wifi-and-stm32-boards-using-built-in-lan8742a-ethernet)
+* [Changelog](changelog.md)
 * [Prerequisites](#prerequisites)
 * [Installation](#installation)
  * [Use Arduino Library Manager](#use-arduino-library-manager)
  * [Manual Install](#manual-install)
  * [VS Code & PlatformIO](#vs-code--platformio)
 * [Packages' Patches](#packages-patches)
-  * [1. For Adafruit nRF52840 and nRF52832 boards](#1-for-adafruit-nRF52840-and-nRF52832-boards)
-  * [2. For Teensy boards](#2-for-teensy-boards)
-  * [3. For Arduino SAM DUE boards](#3-for-arduino-sam-due-boards)
-  * [4. For Arduino SAMD boards](#4-for-arduino-samd-boards)
-      * [For core version v1.8.10+](#for-core-version-v1810)
-      * [For core version v1.8.9-](#for-core-version-v189-)
-  * [5. For Adafruit SAMD boards](#5-for-adafruit-samd-boards)
-  * [6. For Seeeduino SAMD boards](#6-for-seeeduino-samd-boards)
-  * [7. For STM32 boards](#7-for-stm32-boards)
-    * [7.1. For STM32 boards to use LAN8720](#71-for-stm32-boards-to-use-lan8720)
-    * [7.2. For STM32 boards to use Serial1](#72-for-stm32-boards-to-use-serial1)
-* [HOWTO Install esp32 core for ESP32-S2 (Saola, AI-Thinker ESP-12K) and ESP32-C3 boards into Arduino IDE](#howto-install-esp32-core-for-esp32-s2-saola-ai-thinker-esp-12k-and-esp32-c3-boards-into-arduino-ide)
-  * [1. Save the original esp32 core](#1-save-the-original-esp32-core)
-  * [2. Install esp32 core v1.0.6](#2-install-esp32-core-v106)
-    * [2.1 Install esp32 core](#21-install-esp32-core)
-    * [2.2 Download latest zip with esp32-s2 support](#22-download-latest-zip-with-esp32-s2-support)
-    * [2.3 Unzip](#23-unzip)
-    * [2.3 Update esp32 core directories](#24-update-esp32-core-directories)
-  * [3. Download tools for ESP32-S2](#3-download-tools-for-esp32-s2) 
-    * [3.1 Download Toolchain for Xtensa (ESP32-S2) based on GCC](#31-download-toolchain-for-xtensa-esp32-s2-based-on-gcc)
-    * [3.2 Download esptool](#32-download-esptool)
-    * [3.3 Unzip](#33-unzip)
-  * [4. Update tools](#4-update-tools)
-    * [4.1 Update Toolchain](#41-update-toolchain)
-    * [4.2 Update esptool](#42-update-esptool)
-  * [5. Download tools for ESP32-C3](#5-download-tools-for-esp32-c3)
-  * [6. esp32-s2 WebServer Library Patch](#6-esp32-s2-webserver-library-patch)
+  * [1. For STM32 boards to use LAN8720](#1-for-stm32-boards-to-use-lan8720)
+  * [2. For STM32 boards to use Serial1](#2-for-stm32-boards-to-use-serial1)
 * [Note for Platform IO using ESP32 LittleFS](#note-for-platform-io-using-esp32-littlefs) 
 * [HOWTO Fix `Multiple Definitions` Linker Error](#howto-fix-multiple-definitions-linker-error)
 * [Note for Platform IO using ESP32 LittleFS](#note-for-platform-io-using-esp32-littlefs)
@@ -111,7 +74,6 @@
 * [Debug](#debug)
 * [Troubleshooting](#troubleshooting)
 * [Issues](#issues)
-* [Releases](#releases)
 * [TO DO](#to-do)
 * [DONE](#done)
 * [Contributions and Thanks](#contributions-and-thanks)
@@ -185,84 +147,20 @@ This library is based on, modified from:
 ---
 ---

-
-## Changelog
-
-### Releases v1.3.0
-
-1. Add support to WT32_ETH01 (ESP32 + LAN8720) boards
-2. Add examples with new features
-
-### Releases v1.2.0
-
-1. Add support to **LAN8720** Ethernet for many **STM32F4** (F407xx, NUCLEO_F429ZI) and **STM32F7** (DISCO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG) boards.
-2. Add LAN8720 examples
-3. Add Packages' Patches for STM32 to use LAN8720 with STM32Ethernet and LwIP libraries
-4. Update ESP_WiFiManager-related example to fix multiWiFi timings to work better with latest esp32 core v1.0.6
-
-### Releases v1.1.5
-
-1. Fix dependency on unpublished [**STM32AsyncTCP Library**](https://github.com/philbowles/STM32AsyncTCP). Check [Compilation broken due to error in STM32AsyncTCP dependency](https://github.com/khoih-prog/AsyncWebServer_STM32/issues/4) and [how to run one of the examples?](https://github.com/khoih-prog/AsyncWebServer_STM32/issues/2).
-
-### Releases v1.1.4
-
-1. Fix `library.properties` dependency
-
-### Releases v1.1.3
-
-1. Fix non-persistent Connection header bug. Check [**'Connection' header expects 'disconnect' instead 'close' ? #13**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/issues/13)
-2. Add ESP32-S2 support
-3. Tested with [**Latest ESP32 Core 1.0.5**](https://github.com/espressif/arduino-esp32) for ESP32-based boards.
-
-### Releases v1.1.2
-
-1. Rename _lock and _unlock to avoid conflict with [**ESP32/ESP8266 AsyncWebServer**](https://github.com/me-no-dev/ESPAsyncWebServer) library. Check [**compatibility with ESPAsyncWebServer #11**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/issues/11)
-2. Fix compiler warnings.
-
-### Releases v1.1.1
-
-1. Prevent crash if request and/or method not correct.
-
-
-### Releases v1.1.0
-
-1. Add HTTP PUT, PATCH, DELETE and HEAD methods. Check [Add support for sending PUT, PATCH, DELETE request](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/issues/5)
-2. Add Table of Contents
-3. Add Version String
-
-
-### Releases v1.0.2
-
-1. Make Mutex Lock and delete more reliable and error-proof to prevent random crash.
-
-### Releases v1.0.1
-
-1. Restore cpp code besides Impl.h code to use in case of `multiple definition` linker error. Thanks to [Daniel Brunner](https://github.com/0xFEEDC0DE64) to report and make PR in [**Fixed linker errors when included in multiple .cpp files**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/pull/1). See [**HOWTO Fix `Multiple Definitions` Linker Error**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic#HOWTO-Fix-Multiple-Definitions-Linker-Error)
-
-
-### Releases v1.0.0
-
-1. Initial coding to add support to **STM32F/L/H/G/WB/MP1** using built-in LAN8742A Ethernet (Nucleo-144, DISCOVERY, etc).
-2. Add examples using STM32 boards.
-
---
---
-
 ## Prerequisites

- 1. [`Arduino IDE 1.8.15+` for Arduino](https://www.arduino.cc/en/Main/Software)
- 2. [`ESP8266 Core 3.0.1+`](https://github.com/esp8266/Arduino) for ESP8266-based boards. [![Latest release](https://img.shields.io/github/release/esp8266/Arduino.svg)](https://github.com/esp8266/Arduino/releases/latest/)
- 3. [`ESP32 Core 1.0.6+`](https://github.com/espressif/arduino-esp32) for ESP32-based boards. [Latest stable release ![Release Version](https://img.shields.io/github/release/espressif/arduino-esp32.svg?style=plastic)
- 4. [`ESP32-S2/C3 Core 1.0.6+`](https://github.com/espressif/arduino-esp32) for ESP32-S2/C3-based boards. Must follow [HOWTO Install esp32 core for ESP32-S2 (Saola, AI-Thinker ESP-12K) and ESP32-C3 boards into Arduino IDE](#howto-install-esp32-core-for-esp32-s2-saola-ai-thinker-esp-12k-and-esp32-c3-boards-into-arduino-ide).
- 5. [`Arduino Core for STM32 2.0.0+`](https://github.com/stm32duino/Arduino_Core_STM32) for for STM32 using built-in Ethernet LAN8742A. [![GitHub release](https://img.shields.io/github/release/stm32duino/Arduino_Core_STM32.svg)](https://github.com/stm32duino/Arduino_Core_STM32/releases/latest)
+ 1. [`Arduino IDE 1.8.16+` for Arduino](https://www.arduino.cc/en/Main/Software)
+ 2. [`ESP8266 Core 3.0.2+`](https://github.com/esp8266/Arduino) for ESP8266-based boards. [![Latest release](https://img.shields.io/github/release/esp8266/Arduino.svg)](https://github.com/esp8266/Arduino/releases/latest/)
+ 3. [`ESP32 Core 2.0.0+`](https://github.com/espressif/arduino-esp32) for ESP32-based boards. [Latest stable release ![Release Version](https://img.shields.io/github/release/espressif/arduino-esp32.svg?style=plastic)
+ 5. [`Arduino Core for STM32 2.1.0+`](https://github.com/stm32duino/Arduino_Core_STM32) for for STM32 using built-in Ethernet LAN8742A. [![GitHub release](https://img.shields.io/github/release/stm32duino/Arduino_Core_STM32.svg)](https://github.com/stm32duino/Arduino_Core_STM32/releases/latest)
 6. [`ESPAsyncTCP v1.2.2+`](https://github.com/me-no-dev/ESPAsyncTCP) for ESP8266.
 7. [`AsyncTCP v1.1.1+`](https://github.com/me-no-dev/AsyncTCP) for ESP32.
 8. [`STM32Ethernet library v1.2.0+`](https://github.com/stm32duino/STM32Ethernet) for STM32 using built-in Ethernet LAN8742A on (Nucleo-144, Discovery). [![GitHub release](https://img.shields.io/github/release/stm32duino/STM32Ethernet.svg)](https://github.com/stm32duino/STM32Ethernet/releases/latest)
 9. [`LwIP library v2.1.2+`](https://github.com/stm32duino/LwIP) for STM32 using built-in Ethernet LAN8742A on (Nucleo-144, Discovery). [![GitHub release](https://img.shields.io/github/release/stm32duino/LwIP.svg)](https://github.com/stm32duino/LwIP/releases/latest)
 10. [`STM32AsyncTCP library v1.0.1+`](https://github.com/khoih-prog/STM32AsyncTCP) for built-in Ethernet on (Nucleo-144, Discovery). To install manually for Arduino IDE.
-11. [`ESPAsync_WiFiManager library v1.9.1+`](https://github.com/khoih-prog/ESPAsync_WiFiManager) for ESP32/ESP8266 using some examples. [![GitHub release](https://img.shields.io/github/release/khoih-prog/ESPAsync_WiFiManager.svg)](https://github.com/khoih-prog/ESPAsync_WiFiManager/releases)
+11. [`ESPAsync_WiFiManager library v1.9.4+`](https://github.com/khoih-prog/ESPAsync_WiFiManager) for ESP32/ESP8266 using some examples. [![GitHub release](https://img.shields.io/github/release/khoih-prog/ESPAsync_WiFiManager.svg)](https://github.com/khoih-prog/ESPAsync_WiFiManager/releases)
 12.  [`LittleFS_esp32 v1.0.6+`](https://github.com/lorol/LITTLEFS) for ESP32-based boards using LittleFS. To install, check [![arduino-library-badge](https://www.ardu-badge.com/badge/LittleFS_esp32.svg?)](https://www.ardu-badge.com/LittleFS_esp32).
-13. [`WebServer_WT32_ETH01 library v1.1.0+`](https://github.com/khoih-prog/WebServer_WT32_ETH01) if necessary to use WT32_ETH01 boards. To install, check [![arduino-library-badge](https://www.ardu-badge.com/badge/WebServer_WT32_ETH01.svg?)](https://www.ardu-badge.com/WebServer_WT32_ETH01)
+13. [`WebServer_WT32_ETH01 library v1.2.1+`](https://github.com/khoih-prog/WebServer_WT32_ETH01) if necessary to use WT32_ETH01 boards. To install, check [![arduino-library-badge](https://www.ardu-badge.com/badge/WebServer_WT32_ETH01.svg?)](https://www.ardu-badge.com/WebServer_WT32_ETH01)

 ---

@@ -290,130 +188,7 @@ The best and easiest way is to use `Arduino Library Manager`. Search for `AsyncH

 ### Packages' Patches

-#### 1. For Adafruit nRF52840 and nRF52832 boards
-
-**To be able to compile, run and automatically detect and display BOARD_NAME on nRF52840/nRF52832 boards**, you have to copy the whole [nRF52 0.21.0](Packages_Patches/adafruit/hardware/nrf52/0.21.0) directory into Adafruit nRF52 directory (~/.arduino15/packages/adafruit/hardware/nrf52/0.21.0). 
-
-Supposing the Adafruit nRF52 version is 0.21.0. These files must be copied into the directory:
- `~/.arduino15/packages/adafruit/hardware/nrf52/0.21.0/platform.txt`
- `~/.arduino15/packages/adafruit/hardware/nrf52/0.21.0/boards.txt`
- `~/.arduino15/packages/adafruit/hardware/nrf52/0.21.0/variants/NINA_B302_ublox/variant.h`
- `~/.arduino15/packages/adafruit/hardware/nrf52/0.21.0/variants/NINA_B302_ublox/variant.cpp`
- `~/.arduino15/packages/adafruit/hardware/nrf52/0.21.0/variants/NINA_B112_ublox/variant.h`
- `~/.arduino15/packages/adafruit/hardware/nrf52/0.21.0/variants/NINA_B112_ublox/variant.cpp`
- **`~/.arduino15/packages/adafruit/hardware/nrf52/0.21.0/cores/nRF5/Udp.h`**
-
-Whenever a new version is installed, remember to copy these files into the new version directory. For example, new version is x.yy.z
-These files must be copied into the directory:
-
- `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/platform.txt`
- `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/boards.txt`
- `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B302_ublox/variant.h`
- `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B302_ublox/variant.cpp`
- `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B112_ublox/variant.h`
- `~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/variants/NINA_B112_ublox/variant.cpp`
- **`~/.arduino15/packages/adafruit/hardware/nrf52/x.yy.z/cores/nRF5/Udp.h`**
-
-#### 2. For Teensy boards
- 
- **To be able to compile and run on Teensy boards**, you have to copy the files in [**Packages_Patches for Teensy directory**](Packages_Patches/hardware/teensy/avr) into Teensy hardware directory (./arduino-1.8.13/hardware/teensy/avr/boards.txt). 
-
-Supposing the Arduino version is 1.8.13. These files must be copied into the directory:
-
- `./arduino-1.8.13/hardware/teensy/avr/boards.txt`
- `./arduino-1.8.13/hardware/teensy/avr/cores/teensy/Stream.h`
- `./arduino-1.8.13/hardware/teensy/avr/cores/teensy3/Stream.h`
- `./arduino-1.8.13/hardware/teensy/avr/cores/teensy4/Stream.h`
-
-Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz
-These files must be copied into the directory:
-
- `./arduino-x.yy.zz/hardware/teensy/avr/boards.txt`
- `./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy/Stream.h`
- `./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy3/Stream.h`
- `./arduino-x.yy.zz/hardware/teensy/avr/cores/teensy4/Stream.h`
-
-#### 3. For Arduino SAM DUE boards
- 
- **To be able to compile and run on SAM DUE boards**, you have to copy the whole [SAM DUE](Packages_Patches/arduino/hardware/sam/1.6.12) directory into Arduino sam directory (~/.arduino15/packages/arduino/hardware/sam/1.6.12). 
-
-Supposing the Arduino SAM core version is 1.6.12. This file must be copied into the directory:
-
- `~/.arduino15/packages/arduino/hardware/sam/1.6.12/platform.txt`
-
-Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz
-This file must be copied into the directory:
-
- `~/.arduino15/packages/arduino/hardware/sam/x.yy.zz/platform.txt`
-
-#### 4. For Arduino SAMD boards
- 
- ***To be able to compile without error and automatically detect and display BOARD_NAME on Arduino SAMD (Nano-33-IoT, etc) boards***, you have to copy the whole [Arduino SAMD cores 1.8.10](Packages_Patches/arduino/hardware/samd/1.8.10) directory into Arduino SAMD directory (~/.arduino15/packages/arduino/hardware/samd/1.8.10).
- 
-#### For core version v1.8.10+
-
-Supposing the Arduino SAMD version is 1.8.11. Now only one file must be copied into the directory:
-
- `~/.arduino15/packages/arduino/hardware/samd/1.8.11/platform.txt`
-
-Whenever a new version is installed, remember to copy this files into the new version directory. For example, new version is x.yy.zz
-
-This file must be copied into the directory:
-
- `~/.arduino15/packages/arduino/hardware/samd/x.yy.zz/platform.txt`
- 
-#### For core version v1.8.9-
-
-Supposing the Arduino SAMD version is 1.8.9. These files must be copied into the directory:
-
- `~/.arduino15/packages/arduino/hardware/samd/1.8.9/platform.txt`
- ***`~/.arduino15/packages/arduino/hardware/samd/1.8.9/cores/arduino/Arduino.h`***
-
-Whenever a new version is installed, remember to copy these files into the new version directory. For example, new version is x.yy.z
-
-These files must be copied into the directory:
-
- `~/.arduino15/packages/arduino/hardware/samd/x.yy.z/platform.txt`
- ***`~/.arduino15/packages/arduino/hardware/samd/x.yy.z/cores/arduino/Arduino.h`***
- 
- This is mandatory to fix the ***notorious Arduino SAMD compiler error***. See [Improve Arduino compatibility with the STL (min and max macro)](https://github.com/arduino/ArduinoCore-samd/pull/399)
- 
-```
- ...\arm-none-eabi\include\c++\7.2.1\bits\stl_algobase.h:243:56: error: macro "min" passed 3 arguments, but takes just 2
-     min(const _Tp& __a, const _Tp& __b, _Compare __comp)
-```
-
-Whenever the above-mentioned compiler error issue is fixed with the new Arduino SAMD release, you don't need to copy the `Arduino.h` file anymore.
-
-#### 5. For Adafruit SAMD boards
- 
- ***To be able to automatically detect and display BOARD_NAME on Adafruit SAMD (Itsy-Bitsy M4, etc) boards***, you have to copy the file [Adafruit SAMD platform.txt](Packages_Patches/adafruit/hardware/samd/1.6.4) into Adafruit samd directory (~/.arduino15/packages/adafruit/hardware/samd/1.6.4). 
-
-Supposing the Adafruit SAMD core version is 1.6.4. This file must be copied into the directory:
-
- `~/.arduino15/packages/adafruit/hardware/samd/1.6.4/platform.txt`
-
-Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz
-This file must be copied into the directory:
-
- `~/.arduino15/packages/adafruit/hardware/samd/x.yy.zz/platform.txt`
-
-#### 6. For Seeeduino SAMD boards
- 
- ***To be able to automatically detect and display BOARD_NAME on Seeeduino SAMD (XIAO M0, Wio Terminal, etc) boards***, you have to copy the file [Seeeduino SAMD platform.txt](Packages_Patches/Seeeduino/hardware/samd/1.8.1) into Adafruit samd directory (~/.arduino15/packages/Seeeduino/hardware/samd/1.8.1). 
-
-Supposing the Seeeduino SAMD core version is 1.8.1. This file must be copied into the directory:
-
- `~/.arduino15/packages/Seeeduino/hardware/samd/1.8.1/platform.txt`
-
-Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz
-This file must be copied into the directory:
-
- `~/.arduino15/packages/Seeeduino/hardware/samd/x.yy.zz/platform.txt`
-
-#### 7. For STM32 boards
-
-#### 7.1. For STM32 boards to use LAN8720
+#### 1. For STM32 boards to use LAN8720

 To use LAN8720 on some STM32 boards 

@@ -421,12 +196,12 @@ To use LAN8720 on some STM32 boards
 - **Discovery (DISCO_F746NG)**
 - **STM32F4 boards (BLACK_F407VE, BLACK_F407VG, BLACK_F407ZE, BLACK_F407ZG, BLACK_F407VE_Mini, DIYMORE_F407VGT, FK407M1)**

-you have to copy the files [stm32f4xx_hal_conf_default.h](Packages_Patches/STM32/hardware/stm32/1.9.0/system/STM32F4xx) and [stm32f7xx_hal_conf_default.h](Packages_Patches/STM32/hardware/stm32/1.9.0/system/STM32F7xx) into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/1.9.0/system) to overwrite the old files.
+you have to copy the files [stm32f4xx_hal_conf_default.h](Packages_Patches/STM32/hardware/stm32/2.1.0/system/STM32F4xx) and [stm32f7xx_hal_conf_default.h](Packages_Patches/STM32/hardware/stm32/2.1.0/system/STM32F7xx) into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.1.0/system) to overwrite the old files.

-Supposing the STM32 stm32 core version is 1.9.0. These files must be copied into the directory:
+Supposing the STM32 stm32 core version is 2.1.0. These files must be copied into the directory:

- `~/.arduino15/packages/STM32/hardware/stm32/1.9.0/system/STM32F4xx/stm32f4xx_hal_conf_default.h` for STM32F4.
- `~/.arduino15/packages/STM32/hardware/stm32/1.9.0/system/STM32F7xx/stm32f7xx_hal_conf_default.h` for Nucleo-144 STM32F7.
+- `~/.arduino15/packages/STM32/hardware/stm32/2.1.0/system/STM32F4xx/stm32f4xx_hal_conf_default.h` for STM32F4.
+- `~/.arduino15/packages/STM32/hardware/stm32/2.1.0/system/STM32F7xx/stm32f7xx_hal_conf_default.h` for Nucleo-144 STM32F7.

 Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz,
 theses files must be copied into the corresponding directory:
@@ -435,156 +210,24 @@ theses files must be copied into the corresponding directory:
 - `~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/system/STM32F7xx/stm32f7xx_hal_conf_default.h


-#### 7.2. For STM32 boards to use Serial1
+#### 2. For STM32 boards to use Serial1

-**To use Serial1 on some STM32 boards without Serial1 definition (Nucleo-144 NUCLEO_F767ZI, Nucleo-64 NUCLEO_L053R8, etc.) boards**, you have to copy the files [STM32 variant.h](Packages_Patches/STM32/hardware/stm32/1.9.0) into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/1.9.0). You have to modify the files corresponding to your boards, this is just an illustration how to do.
+**To use Serial1 on some STM32 boards without Serial1 definition (Nucleo-144 NUCLEO_F767ZI, Nucleo-64 NUCLEO_L053R8, etc.) boards**, you have to copy the files [STM32 variant.h](Packages_Patches/STM32/hardware/stm32/2.1.0) into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.1.0). You have to modify the files corresponding to your boards, this is just an illustration how to do.

-Supposing the STM32 stm32 core version is 1.9.0. These files must be copied into the directory:
+Supposing the STM32 stm32 core version is 2.1.0. These files must be copied into the directory:

- `~/.arduino15/packages/STM32/hardware/stm32/1.9.0/variants/NUCLEO_F767ZI/variant.h` for Nucleo-144 NUCLEO_F767ZI.
- `~/.arduino15/packages/STM32/hardware/stm32/1.9.0/variants/NUCLEO_L053R8/variant.h` for Nucleo-64 NUCLEO_L053R8.
+- `~/.arduino15/packages/STM32/hardware/stm32/2.1.0/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h` for Nucleo-144 NUCLEO_F767ZI.
+- `~/.arduino15/packages/STM32/hardware/stm32/2.1.0/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h` for Nucleo-64 NUCLEO_L053R8.

 Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz,
 theses files must be copied into the corresponding directory:

- `~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/NUCLEO_F767ZI/variant.h`
- `~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/NUCLEO_L053R8/variant.h`
+- `~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h`
+- `~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h`

 ---
 ---

-## HOWTO Install esp32 core for ESP32-S2 (Saola, AI-Thinker ESP-12K) and ESP32-C3 boards into Arduino IDE
-
-
-These are instructions demonstrating the steps to install esp32-s2 core on Ubuntu machines. For Windows or other OS'es, just follow the the similar principles and steps.
-
-Assuming you already installed Arduino IDE ESP32 core and the installed directory is
-
-`/home/your_account/.arduino15/packages/esp32`
-
-
-### 1. Save the original esp32 core
-
-First, copy the whole original esp32 core to another safe place. Then delete all the sub-directories of
-
-`/home/your_account/.arduino15/packages/esp32/hardware/esp32/1.0.4`
-
---
-
-
-### 2. Install esp32 core v1.0.6
-
-#### 2.1 Install esp32 core
-
-Just use Arduino IDE Board Manager to install [ESP32 Arduino Release 1.0.6 based on ESP-IDF v3.3.5](https://github.com/espressif/arduino-esp32/releases/tag/1.0.6). This official v1.06 core doesn't have esp32-s2/s3 support. You have to download and use the latest master branch.
-
-
-#### 2.2 Download latest zip with esp32-s2 support
-
-As of **April 16th 2021**, the **esp32-s2/c3** board support has been included in master branch of esp32 core. Download [**esp32 core, master branch**](https://github.com/espressif/arduino-esp32) in the zip format.
-
-#### 2.3 Unzip
-
-<p align="center">
-    <img src="https://github.com/khoih-prog/AsyncHTTPRequest_Generic/blob/master/Images/esp32_s2_Core_Unzipped.png">
-</p>
-
-#### 2.4 Update esp32 core directories
-
-Copy all subdirectories of esp32 core into `/home/your_account/.arduino15/packages/esp32/hardware/esp32/1.0.6`
-
-
---
-
-### 3 Download tools for ESP32-S2
-
-
-#### 3.1 Download Toolchain for Xtensa (ESP32-S2) based on GCC
-
-Download [**esp32-s2 Toolchain**](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/api-guides/tools/idf-tools.html#xtensa-esp32s2-elf) corresponding to your environment (linux-amd64, win64, etc.).
-
-For example `xtensa-esp32s2-elf-gcc8_4_0-esp-2020r3-linux-amd64.tar.gz`, then un-archive.
-
-
-<p align="center">
-    <img src="https://github.com/khoih-prog/AsyncHTTPRequest_Generic/blob/master/Images/esp32_s2_Toolchain.png">
-</p>
-
-#### 3.2 Download esptool
-
-
-Download [esptool](https://github.com/espressif/esptool/releases) int the `zip` format:
-
-`esptool-3.0.zip`
-
-#### 3.3 Unzip
-
-<p align="center">
-    <img src="https://github.com/khoih-prog/AsyncHTTPRequest_Generic/blob/master/Images/esp32_s2_esptool.png">
-</p>
-
---
-
-### 4. Update tools
-
-#### 4.1 Update Toolchain
-
-Copy whole `xtensa-esp32s2-elf` directory into `/home/your_account/.arduino15/packages/esp32/hardware/esp32/1.0.6/tools`
-
-
-#### 4.2 Update esptool
-
-Rename `esptool-3.0` directory to `esptool`
-
-
-Copy whole `esptool` directory into `/home/your_account/.arduino15/packages/esp32/hardware/esp32/1.0.6/tools`
-
-
-<p align="center">
-    <img src="https://github.com/khoih-prog/AsyncHTTPRequest_Generic/blob/master/Images/esp32_s2_tools.png">
-</p>
-
-
-### 5 Download tools for ESP32-C3
-
-Download [**esp32-c3 Toolchain**](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/api-guides/tools/idf-tools.html#riscv32-esp-elf) corresponding to your environment (linux-amd64, win64, etc.).
-
-For example`riscv32-esp-elf-gcc8_4_0-crosstool-ng-1.24.0-123-g64eb9ff-linux-amd64.tar.gz`, then un-archive.
-
-Then using the similar steps as in
-
-* [3. Download tools for ESP32-S2](#3-download-tools-for-esp32-s2) 
-  * [3.1 Download Toolchain for Xtensa (ESP32-S2) based on GCC](#31-download-toolchain-for-xtensa-esp32-s2-based-on-gcc)
-  * [3.2 Download esptool](#32-download-esptool)
-  * [3.3 Unzip](#33-unzip)
-* [4. Update tools](#4-update-tools)
-  * [4.1 Update Toolchain](#41-update-toolchain)
-  * [4.2 Update esptool](#42-update-esptool)
-
-then copy whole `riscv32-esp-elf` directory into `/home/your_account/.arduino15/packages/esp32/hardware/esp32/1.0.6/tools`
-
-
-### 6. esp32-s2 WebServer Library Patch
-
-#### Necessary only for esp32 core v1.0.6-
-
-If you haven't installed a new version with [WebServer.handleClient delay PR #4350](https://github.com/espressif/arduino-esp32/pull/4350) or haven't applied the above mentioned PR, you have to use the following patch.
-
-
-**To be able to run Config Portal on ESP32-S2 boards**, you have to copy the files in [esp32-s2 WebServer Patch](esp32s2_WebServer_Patch/) directory into esp32-s2 WebServer library directory (~/.arduino15/packages/esp32/hardware/esp32/1.0.4/libraries/WebServer).
-
-Supposing the esp32-s2 version is 1.0.4, these files `WebServer.h/cpp` must be copied into the directory to replace:
-
- `~/.arduino15/packages/esp32/hardware/esp32/1.0.4/libraries/WebServer/src/WebServer.h`
- `~/.arduino15/packages/esp32/hardware/esp32/1.0.4/libraries/WebServer/src/WebServer.cpp`
-
-
---
-
-That's it. You're now ready to compile and test for ESP32-S2 now
-
---
---

 ### Note for Platform IO using ESP32 LittleFS

@@ -1006,7 +649,7 @@ IPAddress ip(192, 168, 2, 232);

 ```
 Start AsyncHTTPRequest_STM32 on NUCLEO_F767ZI
-AsyncHTTPRequest_Generic v1.3.0
+AsyncHTTPRequest_Generic v1.3.1
 AsyncHTTPRequest @ IP : 192.168.2.72

 **************************************
@@ -1051,7 +694,7 @@ week_number: 37

 ```
 Starting AsyncHTTPRequest_ESP_WiFiManager using LittleFS on ESP8266_NODEMCU
-AsyncHTTPRequest_Generic v1.3.0
+AsyncHTTPRequest_Generic v1.3.1
 Stored: SSID = HueNet1, Pass = 12345678
 Got stored Credentials. Timeout 120s
 ConnectMultiWiFi in setup
@@ -1084,7 +727,7 @@ HHHHHH

 ```
 Starting AsyncHTTPRequest_ESP_WiFiManager using SPIFFS on ESP32_DEV
-AsyncHTTPRequest_Generic v1.3.0
+AsyncHTTPRequest_Generic v1.3.1
 Stored: SSID = HueNet1, Pass = 12345678
 Got stored Credentials. Timeout 120s
 ConnectMultiWiFi in setup
@@ -1135,7 +778,7 @@ HHHHHHHHH HHHHHHHHHH HHHHHHHHHH

 ```
 Starting AsyncHTTPRequest_ESP using ESP8266_NODEMCU
-AsyncHTTPRequest_Generic v1.3.0
+AsyncHTTPRequest_Generic v1.3.1
 Connecting to WiFi SSID: HueNet1
 ...........
 HTTP WebServer is @ IP : 192.168.2.81
@@ -1167,7 +810,7 @@ HHHHHHHHH HHHHHHHHHH HHHHHHHHHH H

 ```
 Start AsyncWebClientRepeating_STM32 on NUCLEO_F767ZI
-AsyncHTTPRequest_Generic v1.3.0
+AsyncHTTPRequest_Generic v1.3.1
 AsyncHTTPRequest @ IP : 192.168.2.72

 **************************************
@@ -1222,7 +865,7 @@ AsyncHTTPRequest @ IP : 192.168.2.72

 ```
 Start AsyncWebClientRepeating_STM32_LAN8720 on BLACK_F407VE
-AsyncHTTPRequest_Generic v1.3.0
+AsyncHTTPRequest_Generic v1.3.1
 AsyncHTTPRequest @ IP : 192.168.2.150


@@ -1277,8 +920,8 @@ AsyncHTTPRequest @ IP : 192.168.2.150

 ```
 Starting AsyncHTTPRequest_WT32_ETH01 on ESP32_DEV with ETH_PHY_LAN8720
-WebServer_WT32_ETH01 v1.1.0
-AsyncHTTPRequest_Generic v1.3.0
+WebServer_WT32_ETH01 v1.2.1
+AsyncHTTPRequest_Generic v1.3.1
 ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
 AsyncHTTPRequest @ IP : 192.168.2.232

@@ -1303,8 +946,8 @@ H

 ```
 Starting AsyncHTTPRequest_WT32_ETH01 on ESP32_DEV with ETH_PHY_LAN8720
-WebServer_WT32_ETH01 v1.1.0
-AsyncHTTPRequest_Generic v1.3.0
+WebServer_WT32_ETH01 v1.2.1
+AsyncHTTPRequest_Generic v1.3.1
 ETH MAC: A8:03:2A:A1:61:73, IPv4: 192.168.2.232, FULL_DUPLEX, 100Mbps
 AsyncHTTPRequest @ IP : 192.168.2.232

@@ -1377,62 +1020,6 @@ Submit issues to: [AsyncHTTPRequest_Generic issues](https://github.com/khoih-pro
 5. Add support to **Ethernet LAN8720** using [STM32Ethernet library](https://github.com/stm32duino/STM32Ethernet), for boards such as **Nucleo-144 (F429ZI, NUCLEO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG), Discovery (DISCO_F746NG)** and **STM32F4 boards (BLACK_F407VE, BLACK_F407VG, BLACK_F407ZE, BLACK_F407ZG, BLACK_F407VE_Mini, DIYMORE_F407VGT, FK407M1)**
 6. Add support to **WT32_ETH01** using ESP32-based boards and LAN8720 Ethernet

---
-
-## Releases
-
-### Releases v1.3.0
-
-1. Add support to WT32_ETH01 (ESP32 + LAN8720) boards
-2. Add examples with new features
-
-### Releases v1.2.0
-
-1. Add support to **LAN8720** Ethernet for many **STM32F4** (F407xx, NUCLEO_F429ZI) and **STM32F7** (DISCO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG) boards.
-2. Add LAN8720 examples
-3. Add Packages' Patches for STM32 to use LAN8720 with STM32Ethernet and LwIP libraries
-4. Update ESP_WiFiManager-related example to fix multiWiFi timings to work better with latest esp32 core v1.0.6
-
-### Releases v1.1.5
-
-1. Fix dependency on unpublished [**STM32AsyncTCP Library**](https://github.com/philbowles/STM32AsyncTCP). Check [Compilation broken due to error in STM32AsyncTCP dependency](https://github.com/khoih-prog/AsyncWebServer_STM32/issues/4) and [how to run one of the examples?](https://github.com/khoih-prog/AsyncWebServer_STM32/issues/2).
-
-### Releases v1.1.4
-
-1. Fix `library.properties` dependency
-
-### Releases v1.1.3
-
-1. Fix non-persistent Connection header bug. Check [**'Connection' header expects 'disconnect' instead 'close' ? #13**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/issues/13)
-2. Add ESP32-S2 support
-3. Tested with [**Latest ESP32 Core 1.0.5**](https://github.com/espressif/arduino-esp32) for ESP32-based boards.
-
-### Releases v1.1.2
-
-1. Rename _lock and _unlock to avoid conflict with [**ESP32/ESP8266 AsyncWebServer**](https://github.com/me-no-dev/ESPAsyncWebServer) library. Check [**compatibility with ESPAsyncWebServer #11**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/issues/11)
-2. Fix compiler warnings.
-
-### Releases v1.1.1
-
-1. Prevent crash if request and/or method not correct.
-
-### Releases v1.1.0
-
-1. Add HTTP PUT, PATCH, DELETE and HEAD methods. Check [Add support for sending PUT, PATCH, DELETE request](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/issues/5)
-
-### Releases v1.0.2
-
-1. Make Mutex Lock and delete more reliable and error-proof to prevent random crash.
-
-### Releases v1.0.1
-
-1. Restore cpp code besides Impl.h code to use in case of `multiple definition` linker error. Thanks to [Daniel Brunner](https://github.com/0xFEEDC0DE64) to report and make PR in [**Fixed linker errors when included in multiple .cpp files**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/pull/1). See [**HOWTO Fix `Multiple Definitions` Linker Error**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic#HOWTO-Fix-Multiple-Definitions-Linker-Error)
-
-### Releases v1.0.0
-
-1. Initial coding to add support to **STM32F/L/H/G/WB/MP1** using built-in LAN8742A Ethernet (Nucleo-144, DISCOVERY, etc).
-2. Add examples using STM32 boards.
-
 ---
 ---

@@ -0,0 +1,95 @@
+# AsyncHTTPRequest_Generic
+
+[![arduino-library-badge](https://www.ardu-badge.com/badge/AsyncHTTPRequest_Generic.svg?)](https://www.ardu-badge.com/AsyncHTTPRequest_Generic)
+[![GitHub release](https://img.shields.io/github/release/khoih-prog/AsyncHTTPRequest_Generic.svg)](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/releases)
+[![GitHub](https://img.shields.io/github/license/mashape/apistatus.svg)](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/blob/master/LICENSE)
+[![contributions welcome](https://img.shields.io/badge/contributions-welcome-brightgreen.svg?style=flat)](#Contributing)
+[![GitHub issues](https://img.shields.io/github/issues/khoih-prog/AsyncHTTPRequest_Generic.svg)](http://github.com/khoih-prog/AsyncHTTPRequest_Generic/issues)
+
+---
+---
+
+## Table of Contents
+
+* [Changelog](#changelog)
+  * [Releases v1.3.1](#releases-v131)
+  * [Releases v1.3.0](#releases-v130)
+  * [Releases v1.2.0](#releases-v120)
+  * [Releases v1.1.5](#releases-v115)
+  * [Releases v1.1.4](#releases-v114)
+  * [Releases v1.1.3](#releases-v113)
+  * [Releases v1.1.2](#releases-v112)
+  * [Releases v1.1.1](#releases-v111)
+  * [Releases v1.1.0](#releases-v110)
+  * [Releases v1.0.2](#releases-v102)
+  * [Releases v1.0.1](#releases-v101)
+  * [Releases v1.0.0](#releases-v100)
+
+---
+---
+
+## Changelog
+
+### Releases v1.3.1
+
+1. Update `platform.ini` and `library.json` to use original `khoih-prog` instead of `khoih.prog` after PIO fix
+2. Update `Packages' Patches`
+
+### Releases v1.3.0
+
+1. Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+2. Add examples with new features
+
+### Releases v1.2.0
+
+1. Add support to **LAN8720** Ethernet for many **STM32F4** (F407xx, NUCLEO_F429ZI) and **STM32F7** (DISCO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG) boards.
+2. Add LAN8720 examples
+3. Add Packages' Patches for STM32 to use LAN8720 with STM32Ethernet and LwIP libraries
+4. Update ESP_WiFiManager-related example to fix multiWiFi timings to work better with latest esp32 core v1.0.6
+
+### Releases v1.1.5
+
+1. Fix dependency on unpublished [**STM32AsyncTCP Library**](https://github.com/philbowles/STM32AsyncTCP). Check [Compilation broken due to error in STM32AsyncTCP dependency](https://github.com/khoih-prog/AsyncWebServer_STM32/issues/4) and [how to run one of the examples?](https://github.com/khoih-prog/AsyncWebServer_STM32/issues/2).
+
+### Releases v1.1.4
+
+1. Fix `library.properties` dependency
+
+### Releases v1.1.3
+
+1. Fix non-persistent Connection header bug. Check [**'Connection' header expects 'disconnect' instead 'close' ? #13**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/issues/13)
+2. Add ESP32-S2 support
+3. Tested with [**Latest ESP32 Core 1.0.5**](https://github.com/espressif/arduino-esp32) for ESP32-based boards.
+
+### Releases v1.1.2
+
+1. Rename _lock and _unlock to avoid conflict with [**ESP32/ESP8266 AsyncWebServer**](https://github.com/me-no-dev/ESPAsyncWebServer) library. Check [**compatibility with ESPAsyncWebServer #11**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/issues/11)
+2. Fix compiler warnings.
+
+### Releases v1.1.1
+
+1. Prevent crash if request and/or method not correct.
+
+
+### Releases v1.1.0
+
+1. Add HTTP PUT, PATCH, DELETE and HEAD methods. Check [Add support for sending PUT, PATCH, DELETE request](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/issues/5)
+2. Add Table of Contents
+3. Add Version String
+
+
+### Releases v1.0.2
+
+1. Make Mutex Lock and delete more reliable and error-proof to prevent random crash.
+
+### Releases v1.0.1
+
+1. Restore cpp code besides Impl.h code to use in case of `multiple definition` linker error. Thanks to [Daniel Brunner](https://github.com/0xFEEDC0DE64) to report and make PR in [**Fixed linker errors when included in multiple .cpp files**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic/pull/1). See [**HOWTO Fix `Multiple Definitions` Linker Error**](https://github.com/khoih-prog/AsyncHTTPRequest_Generic#HOWTO-Fix-Multiple-Definitions-Linker-Error)
+
+
+### Releases v1.0.0
+
+1. Initial coding to add support to **STM32F/L/H/G/WB/MP1** using built-in LAN8742A Ethernet (Nucleo-144, DISCOVERY, etc).
+2. Add examples using STM32 boards.
+
+
@@ -1,6 +1,6 @@
 {
  "name":"AsyncHTTPRequest_Generic",
-  "version": "1.3.0",
+  "version": "1.3.1",
  "description":"Simple Async HTTP Request library, supporting GET, POST, PUT, PATCH, DELETE and HEAD, on top of AsyncTCP libraries, such as AsyncTCP, ESPAsyncTCP, AsyncTCP_STM32, etc.. for ESP32 (including ESP32-S2), WT32_ETH01 (ESP32 + LAN8720), ESP8266 and currently STM32 with LAN8720 or built-in LAN8742A Ethernet.",
  "keywords":"communication, async, tcp, http, ESP8266, ESP32, ESP32-S2, wt32-eth01, ESPAsyncTCP, AsyncTCP, stm32, ethernet, wifi, lan8742a, lan8720, f407ve, nucleo, nucleo-144, stm32f7, stm32f4",
  "authors": [
@@ -37,9 +37,9 @@
      "platforms": "espressif8266"
    },
    {
-      "owner": "khoih.prog",
+      "owner": "khoih-prog",
      "name": "ESPAsync_WiFiManager",
-      "version": ">=1.9.1",
+      "version": ">=1.9.4",
      "platforms": ["espressif8266", "espressif32"]
    },
    {
@@ -61,9 +61,9 @@
      "platforms": ["espressif32"]
    },
    {
-      "owner": "khoih.prog",
+      "owner": "khoih-prog",
      "name": "WebServer_WT32_ETH01",
-      "version": ">=1.1.0",
+      "version": ">=1.2.1",
      "platforms": ["espressif32"]
    },
    {
@@ -1,5 +1,5 @@
 name=AsyncHTTPRequest_Generic
-version=1.3.0
+version=1.3.1
 author=Bob Lemaire,Khoi Hoang <khoih.prog@gmail.com>
 maintainer=Khoi Hoang <khoih.prog@gmail.com>
 license=MIT
@@ -33,6 +33,9 @@ upload_speed = 921600
 ;monitor_speed = 9600
 ;monitor_port = COM11

+; Checks for the compatibility with frameworks and dev/platforms
+lib_compat_mode = strict
+
 lib_deps =  
 ; PlatformIO 4.x
 ;  AsyncTCP@>=1.1.1
@@ -40,9 +43,9 @@ lib_deps =
 ;  https://github.com/khoih-prog/STM32AsyncTCP.git
 ;  STM32duino LwIP@>=2.1.2
 ;  STM32duino STM32Ethernet@>=1.2.0
-;  ESPAsync_WiFiManager@>=1.9.1
+;  ESPAsync_WiFiManager@>=1.9.3
 ;  LittleFS_esp32@>=1.0.6
-;  WebServer_WT32_ETH01@>=1.1.0
+;  WebServer_WT32_ETH01@>=1.2.1
 ; PlatformIO 5.x  
 me-no-dev/AsyncTCP@>=1.1.1
 me-no-dev/ESPAsyncTCP@>=1.2.2
@@ -50,9 +53,9 @@ lib_deps =
 https://github.com/khoih-prog/STM32AsyncTCP.git
 stm32duino/STM32duino LwIP@>=2.1.2
 stm32duino/STM32duino STM32Ethernet@>=1.2.0
- khoih-prog/ESPAsync_WiFiManager@>=1.9.1
+ khoih-prog/ESPAsync_WiFiManager@>=1.9.3
 lorol/LittleFS_esp32@>=1.0.6
- khoih.prog/WebServer_WT32_ETH01@>=1.1.0
+ khoih-prog/WebServer_WT32_ETH01@>=1.2.1
  
 build_flags =
 ; set your debug output (default=Serial)
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/

 #pragma once
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/

 #pragma once
@@ -39,7 +40,7 @@
 #ifndef ASYNC_HTTP_REQUEST_GENERIC_H
 #define ASYNC_HTTP_REQUEST_GENERIC_H

-#define ASYNC_HTTP_REQUEST_GENERIC_VERSION   "AsyncHTTPRequest_Generic v1.3.0"
+#define ASYNC_HTTP_REQUEST_GENERIC_VERSION   "AsyncHTTPRequest_Generic v1.3.1"

 #include <Arduino.h>

@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/
 
 #pragma once
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/
 
 /********************************************************************************************
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/

 #pragma once
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/

 #pragma once
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/
 
 #include "AsyncHTTPRequest_Debug_Generic.h"
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/

 #pragma once
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/

 #include "utility/xbuf.h"
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/
 
 /********************************************************************************************
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/

 #pragma once
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/

 #pragma once
@@ -39,7 +40,7 @@
 #ifndef ASYNC_HTTP_REQUEST_GENERIC_H
 #define ASYNC_HTTP_REQUEST_GENERIC_H

-#define ASYNC_HTTP_REQUEST_GENERIC_VERSION   "AsyncHTTPRequest_Generic v1.3.0"
+#define ASYNC_HTTP_REQUEST_GENERIC_VERSION   "AsyncHTTPRequest_Generic v1.3.1"

 #include <Arduino.h>

@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/
 
 #pragma once
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/
 
 /********************************************************************************************
@@ -17,7 +17,7 @@
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
  You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.  
 
-  Version: 1.3.0
+  Version: 1.3.1
  
  Version Modified By   Date      Comments
  ------- -----------  ---------- -----------
@@ -32,6 +32,7 @@
  1.1.5    K Hoang     22/03/2021 Fix dependency on STM32AsyncTCP Library
  1.2.0    K Hoang     11/04/2021 Add support to LAN8720 using STM32F4 or STM32F7
  1.3.0    K Hoang     09/07/2021 Add support to WT32_ETH01 (ESP32 + LAN8720) boards
+  1.3.1    K Hoang     09/10/2021 Update `platform.ini` and `library.json`
 *****************************************************************************************************************************/

 #pragma once
Author	SHA1	Message	Date
Khoi Hoang	6baa6497b7	v1.3.1 to update PIO ### Releases v1.3.1 1. Update `platform.ini` and `library.json` to use original `khoih-prog` instead of `khoih.prog` after PIO fix 2. Update `Packages' Patches`	2021-10-09 15:17:08 -04:00
Khoi Hoang	2f9224c2ae	Update Packages_Patches	2021-10-09 15:13:36 -04:00
Khoi Hoang	8094d27cdc	v1.3.1 to update PIO ### Releases v1.3.1 1. Update `platform.ini` and `library.json` to use original `khoih-prog` instead of `khoih.prog` after PIO fix 2. Update `Packages' Patches`	2021-10-09 15:12:57 -04:00
Khoi Hoang	890ddc61c6	Add STM32 v2.1.0 Patches	2021-10-02 00:20:58 -04:00
Khoi Hoang	0c8a4ed4b9	Update files - Add `lib_compat_mode = strict` to platform.ini - Split changelog.md from README.md	2021-09-16 22:09:57 -04:00
Khoi Hoang	de572b8d90	Add Adafruit nrf52 core v1.0.0	2021-08-24 14:22:42 -04:00
Khoi Hoang	387a427108	Add SAMD core v1.7.4	2021-08-18 18:58:22 -04:00
Khoi Hoang	b1c2a2f152	Update Adafruit Packages_Patches	2021-08-14 12:21:33 -04:00
Khoi Hoang	5216c562dc	Create auto-github-actions.yml	2021-07-19 20:21:24 -04:00