From 25e74fe90c07acf9f79fafd4e9da9f502da94ad7 Mon Sep 17 00:00:00 2001 From: Bodmer Date: Wed, 16 Mar 2022 16:23:07 +0000 Subject: [PATCH] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 0943433..cea6366 100644 --- a/README.md +++ b/README.md @@ -70,7 +70,7 @@ ILI9341 and ST7796 SPI based displays are recommended as starting point for expe The library supports some TFT displays designed for the Raspberry Pi (RPi) that are based on a ILI9486 or ST7796 driver chip with a 480 x 320 pixel screen. The ILI9486 RPi display must be of the Waveshare design and use a 16 bit serial interface based on the 74HC04, 74HC4040 and 2 x 74HC4094 logic chips. Note that due to design variations between these displays not all RPi displays will work with this library, so purchasing a RPi display of these types solely for use with this library is not recommended. -A "good" RPi display is the [MHS-4.0 inch Display-B type ST7796](http://www.lcdwiki.com/MHS-4.0inch_Display-B) which provides good performance. This has a dedicated controller and can be clocked at up to 80MHz with the ESP32 (55MHz with STM32 and 40MHz with ESP8266). The [MHS-3.5 inch RPi ILI9486](http://www.lcdwiki.com/MHS-3.5inch_RPi_Display) based display may also work but this has not been tested. +A "good" RPi display is the [MHS-4.0 inch Display-B type ST7796](http://www.lcdwiki.com/MHS-4.0inch_Display-B) which provides good performance. This has a dedicated controller and can be clocked at up to 80MHz with the ESP32 (55MHz with STM32 and 40MHz with ESP8266). The [MHS-3.5 inch RPi ILI9486](http://www.lcdwiki.com/MHS-3.5inch_RPi_Display) based display is also supported. Some displays permit the internal TFT screen RAM to be read, some of the examples use this feature. The TFT_Screen_Capture example allows full screens to be captured and sent to a PC, this is handy to create program documentation.