feedc0de/TFT_eSPI
1
0 Fork 0
forked from Bodmer/TFT_eSPI
Code Pull Requests Activity

Various updates

Browse Source 
RM68120 support for RP2040 added
Various other updates and typo corrections
This commit is contained in:
Bodmer committed 2023-02-20 19:03:44 +00:00
1 parent 0bad8c7acc
commit 34850973a0
20 files changed
+466 -501
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

User_Setups/Setup106_RP2040_ILI9481_16bit_parallel.h
+13
View File
@@ -8,6 +8,19 @@
//#define TFT_PARALLEL_8_BIT
#define TFT_PARALLEL_16_BIT
// The parallel interface write cycle period is derived from a division of the CPU clock
// speed so scales with the processor clock. This means that the divider ratio may need
// to be increased when overclocking. I may also need to be adjusted dependant on the
// display controller type (ILI94341, HX8357C etc). If RP2040_PIO_CLK_DIV is not defined
// the library will set default values which may not suit your display.
// The display controller data sheet will specify the minimum write cycle period. The
// controllers often work reliably for shorter periods, however if the period is too short
// the display may not initialise or graphics will become corrupted.
// PIO write cycle frequency = (CPU clock/(4 * RP2040_PIO_CLK_DIV))
//#define RP2040_PIO_CLK_DIV 1 // 32ns write cycle at 125MHz CPU clock
//#define RP2040_PIO_CLK_DIV 2 // 64ns write cycle at 125MHz CPU clock
//#define RP2040_PIO_CLK_DIV 3 // 96ns write cycle at 125MHz CPU clock
//#define RP2040_PIO_CLK_DIV 4 // 96ns write cycle at 125MHz CPU clock
////////////////////////////////////////////////////////////////////////////////////////////
// Display driver type
User_Setups/Setup13_ILI9481_Parallel.h
+1 -1
View File
@@ -1,7 +1,7 @@
// See SetupX_Template.h for all options available
#define USER_SETUP_ID 13
#define ESP32_PARALLEL
#define TFT_PARALLEL_8_BIT
#define ILI9481_DRIVER
User_Setups/Setup17_ePaper.h
+4 -29
View File
@@ -1,34 +1,9 @@
// See SetupX_Template.h for all options available
#define USER_SETUP_ID 17
#define EPD_DRIVER // ePaper driver
// READ THIS READ THIS READ THIS READ THIS READ THIS READ THIS
// Install the ePaper library for your own display size and type
// from here:
// https://github.com/Bodmer/EPD_Libraries
// Note: Pin allocations for the ePaper signals are defined in
// the ePaper library's epdif.h file. There follows the default
// pins already included in epdif.h file for the ESP8266:
///////////////////////////////////////////////////////////////////
// For ESP8266 connect as follows: //
// Display 3.3V to NodeMCU 3V3 //
// Display GND to NodeMCU GND //
// //
// Display GPIO NodeMCU pin //
// BUSY 5 D1 //
// RESET 4 D2 //
// DC 0 D3 //
// CS 2 D4 //
// CLK 14 D5 //
// D6 (MISO not connected to display) //
// DIN 13 D7 //
// //
///////////////////////////////////////////////////////////////////
#define TFT_MISO -1
#define TFT_MOSI -1
#define TFT_SCLK -1
#define TFT_RST -1
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
User_Setups/Setup202_SSD1351_128.h
+1 -1
View File
@@ -28,7 +28,7 @@
#define TFT_DC 2
#define TFT_RST 4
#define TFT_CS 15
#elif defined(ESP8266)
#elif defined (ARDUINO_ARCH_ESP8266)
//#define TFT_MOSI PIN_D5 // Can't change
//#define TFT_SCLK PIN_D7 // Can't change
#define TFT_DC PIN_D3