Added LilyGo T-QT Support (#2602)

Co-authored-by: lewishe <lewishe@outlook.com>

User_Setups/Setup211_LilyGo_T_QT_Pro_S3.h

@@ -0,0 +1,45 @@
+// GC9A01 128 x 128 display with no chip select line
+#define USER_SETUP_ID 211
+
+#define GC9A01_DRIVER     // Configure all registers
+
+#define TFT_WIDTH  128
+#define TFT_HEIGHT 128
+
+// #define TFT_RGB_ORDER TFT_RGB  // Colour order Red-Green-Blue
+//#define TFT_RGB_ORDER TFT_BGR  // Colour order Blue-Green-Red
+
+// #define TFT_INVERSION_ON
+//#define TFT_INVERSION_OFF
+#define TFT_BACKLIGHT_ON 0
+#define CGRAM_OFFSET
+
+
+#define TFT_BL     10   // LED back-light
+#define TFT_MISO   -1   // Not connected
+#define TFT_MOSI   2
+#define TFT_SCLK   3
+#define TFT_CS     5 
+#define TFT_DC     6
+#define TFT_RST    1 // Connect reset to ensure display initialises
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+#define SMOOTH_FONT
+
+
+// #define SPI_FREQUENCY  27000000
+#define SPI_FREQUENCY  40000000
+
+#define SPI_READ_FREQUENCY  20000000
+
+#define SPI_TOUCH_FREQUENCY  2500000
+
+// #define SUPPORT_TRANSACTIONS