// GC9A01 128 x 128 display with no chip select line #define USER_SETUP_ID 211 #define GC9A01_DRIVER // Configure all registers #define TFT_WIDTH 128 #define TFT_HEIGHT 128 // #define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue //#define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red // #define TFT_INVERSION_ON //#define TFT_INVERSION_OFF #define TFT_BACKLIGHT_ON 0 #define CGRAM_OFFSET #define TFT_BL 10 // LED back-light #define TFT_MISO -1 // Not connected #define TFT_MOSI 2 #define TFT_SCLK 3 #define TFT_CS 5 #define TFT_DC 6 #define TFT_RST 1 // Connect reset to ensure display initialises #define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH #define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters #define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters #define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm #define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:. #define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-. //#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT #define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts #define SMOOTH_FONT // #define SPI_FREQUENCY 27000000 #define SPI_FREQUENCY 40000000 #define SPI_READ_FREQUENCY 20000000 #define SPI_TOUCH_FREQUENCY 2500000 // #define SUPPORT_TRANSACTIONS