11:42:02:048 -> No PM sensor detected on Serial0
11:42:02:048 -> initializing PM sensor
11:42:02:048 -> cleared 0 byte(s)
11:42:02:048 -> setting active mode
11:42:02:048 -> 7 byte(s) written
11:42:06:047 -> No PM sensor detected on Serial1
11:42:06:047 -> Firmware Mode: 0-1PS
11:42:06:068 -> Set S8 AbcDays successful
11:42:06:069 -> [ApiClient] Info: Init apiRoot: http://hw.airgradient.com
11:42:06:069 -> [ApiClient] Info: begin
11:42:06:115 -> [WifiConnector] Info: Connecting to WiFi...
11:42:06:116 -> *wm:AutoConnect 
11:42:06:116 -> *wm:Connecting to SAVED AP: ag-diamond_2.4GHz
11:42:06:618 -> E (10416) wifi:sta is connecting, return error
11:42:06:618 -> [ 10170][E][WiFiSTA.cpp:317] begin(): connect failed! 0x3007
11:42:14:032 -> *wm:AutoConnect: SUCCESS 
11:42:14:032 -> *wm:STA IP Address: 192.168.100.127
11:42:14:032 -> [WifiConnector] Info: Wait for configure portal
11:42:14:032 -> [WifiConnector] Info: WiFi Connected: ag-diamond_2.4GHz IP: 192.168.100.127
11:42:14:045 -> [LocalServer] Info: Init: airgradient_d83bda1b86c8.local
11:42:16:514 -> MQTT is not configured, skipping initialization of MQTT client
11:42:16:515 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:42:16:515 -> [ApiClient] Info: DATA: {"wifi":-61,"boot":0}
11:42:16:515 -> [ApiClient] Info: Return code: 200
11:42:22:515 -> 
11:42:22:515 -> firmwareCheckForUpdate:
11:42:22:515 -> firmwareCheckForUpdate: Perform
11:42:22:516 -> checking for new OTA update @ http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/generic/os/firmware.bin?current_firmware=3.1.9-1-g4691500-dirty
11:42:23:073 -> Firmware update skipped, the server returned 400
11:42:23:074 -> 3
11:42:23:074 -> OTA message: 
11:42:23:074 -> 
11:42:23:690 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:42:23:690 -> [ApiClient] Info: Return code: 200
11:42:23:691 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:42:23:693 -> [Configure] Info: Parse configure success
11:42:23:693 -> [Configure] Info: Detected new firmware version: 3.1.9
11:42:23:721 -> CO2 (ppm): 423
11:42:23:722 -> state: 12
11:42:27:741 -> CO2 (ppm): 420
11:42:31:761 -> CO2 (ppm): 419
11:42:35:782 -> CO2 (ppm): 413
11:42:39:803 -> CO2 (ppm): 413
11:42:43:823 -> CO2 (ppm): 413
11:42:47:843 -> CO2 (ppm): 413
11:42:51:864 -> CO2 (ppm): 413
11:42:56:472 -> CO2 (ppm): 413
11:42:56:472 -> External watchdog feed!
11:42:56:473 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:42:56:473 -> [Configure] Info: Parse configure success
11:42:56:473 -> [Configure] Info: co2CalibrationRequested: True
11:42:56:474 -> [Configure] Info: Detected new firmware version: 3.1.9
11:42:56:474 -> state: 12
11:42:56:474 -> [StateMachine] Info: CO2 Calibration
11:42:56:474 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:42:57:474 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:42:58:474 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:42:59:474 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:43:00:474 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:43:03:482 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:43:03:495 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:43:03:504 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:43:03:518 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:43:03:518 -> [StateMachine] Info: CO2 Calibration: success
11:43:04:518 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:43:04:526 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:43:04:539 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
11:43:04:539 -> Flags: 20
11:43:04:539 -> Success calibration!
11:43:04:539 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
11:43:07:549 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:43:07:550 -> [ApiClient] Info: DATA: {"wifi":-56,"rco2":413,"boot":0,"bootCount":0}
11:43:07:550 -> [ApiClient] Info: Return code: 200
11:43:07:551 -> 
11:43:07:551 -> Online mode and isPostToAirGradient = true: watchdog reset
11:43:07:551 -> 
11:43:07:573 -> CO2 (ppm): 401
11:43:11:594 -> CO2 (ppm): 401
11:43:15:614 -> CO2 (ppm): 401
11:43:19:635 -> CO2 (ppm): 401
11:43:23:654 -> CO2 (ppm): 400
11:43:24:308 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:43:24:309 -> [ApiClient] Info: Return code: 200
11:43:24:310 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:43:24:312 -> [Configure] Info: Parse configure success
11:43:24:312 -> [Configure] Info: Detected new firmware version: 3.1.9
11:43:24:314 -> state: 12
11:43:27:676 -> CO2 (ppm): 400
11:43:31:696 -> CO2 (ppm): 400
11:43:35:717 -> CO2 (ppm): 400
11:43:39:736 -> CO2 (ppm): 400
11:43:43:756 -> CO2 (ppm): 400
11:43:47:777 -> CO2 (ppm): 400
11:43:51:797 -> CO2 (ppm): 399
11:43:55:818 -> CO2 (ppm): 399
11:43:56:495 -> External watchdog feed!
11:43:59:860 -> CO2 (ppm): 399
11:44:03:881 -> CO2 (ppm): 398
11:44:06:559 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:44:06:559 -> [Configure] Info: Parse configure success
11:44:06:559 -> [Configure] Info: co2CalibrationRequested: True
11:44:06:560 -> [Configure] Info: Detected new firmware version: 3.1.9
11:44:06:561 -> state: 12
11:44:06:561 -> [StateMachine] Info: CO2 Calibration
11:44:06:561 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:44:07:560 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:44:08:560 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:44:09:560 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:44:10:560 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:44:13:568 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:44:13:581 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:44:13:590 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:44:13:604 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:44:13:605 -> [StateMachine] Info: CO2 Calibration: success
11:44:14:605 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:44:14:613 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:44:14:626 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:44:14:627 -> Flags: 0
11:44:15:635 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:44:15:647 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:44:15:648 -> Flags: 0
11:44:16:656 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:44:16:669 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:44:16:669 -> Flags: 0
11:44:17:677 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:44:17:689 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:44:17:690 -> Flags: 0
11:44:18:698 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:44:18:710 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:44:18:711 -> Flags: 0
11:44:19:714 -> Calibration Timeout
11:44:19:715 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:44:22:720 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:44:22:721 -> [ApiClient] Info: DATA: {"wifi":-58,"rco2":398,"boot":1,"bootCount":1}
11:44:22:721 -> [ApiClient] Info: Return code: 200
11:44:22:722 -> 
11:44:22:722 -> Online mode and isPostToAirGradient = true: watchdog reset
11:44:22:722 -> 
11:44:27:731 -> Get CO2 failed: 1
11:44:28:309 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:44:28:309 -> [ApiClient] Info: Return code: 200
11:44:28:310 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:44:28:312 -> [Configure] Info: Parse configure success
11:44:28:312 -> [Configure] Info: Detected new firmware version: 3.1.9
11:44:28:314 -> state: 12
11:44:33:379 -> [StateMachine] Info: Setting S8 from off to 8 days successful
11:44:33:400 -> CO2 (ppm): 746
11:44:37:420 -> CO2 (ppm): 668
11:44:45:461 -> CO2 (ppm): 606
11:44:45:461 -> CO2 (ppm): 565
11:44:49:482 -> CO2 (ppm): 529
11:44:53:503 -> CO2 (ppm): 499
11:44:56:518 -> External watchdog feed!
11:44:57:523 -> CO2 (ppm): 481
11:45:01:543 -> CO2 (ppm): 459
11:45:05:563 -> CO2 (ppm): 447
11:45:09:583 -> CO2 (ppm): 447
11:45:13:603 -> CO2 (ppm): 447
11:45:17:623 -> CO2 (ppm): 444
11:45:21:643 -> CO2 (ppm): 437
11:45:21:730 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:45:21:731 -> [Configure] Info: Parse configure success
11:45:21:731 -> [Configure] Info: co2CalibrationRequested: True
11:45:21:732 -> [Configure] Info: Detected new firmware version: 3.1.9
11:45:21:732 -> state: 12
11:45:21:732 -> [StateMachine] Info: CO2 Calibration
11:45:21:732 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:45:22:732 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:45:23:732 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:45:24:732 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:45:25:731 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:45:28:740 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:45:28:754 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:45:28:762 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:45:28:776 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:45:28:777 -> [StateMachine] Info: CO2 Calibration: success
11:45:29:777 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:45:29:785 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:45:29:798 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:45:29:799 -> Flags: 0
11:45:30:806 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:45:30:818 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:45:30:819 -> Flags: 0
11:45:31:827 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:45:31:839 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:45:31:840 -> Flags: 0
11:45:32:848 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:45:32:860 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:45:32:861 -> Flags: 0
11:45:33:869 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:45:33:881 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:45:33:882 -> Flags: 0
11:45:34:881 -> Calibration Timeout
11:45:34:883 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:45:37:530 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:45:37:530 -> [ApiClient] Info: Return code: 200
11:45:37:532 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:45:37:535 -> [Configure] Info: Parse configure success
11:45:37:535 -> [Configure] Info: Detected new firmware version: 3.1.9
11:45:37:536 -> state: 12
11:45:38:497 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:45:38:497 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":437,"boot":2,"bootCount":2}
11:45:38:497 -> [ApiClient] Info: Return code: 200
11:45:38:498 -> 
11:45:38:498 -> Online mode and isPostToAirGradient = true: watchdog reset
11:45:38:498 -> 
11:45:38:520 -> CO2 (ppm): 416
11:45:42:541 -> CO2 (ppm): 412
11:45:46:561 -> CO2 (ppm): 409
11:45:50:582 -> CO2 (ppm): 405
11:45:54:602 -> CO2 (ppm): 403
11:45:56:540 -> External watchdog feed!
11:45:58:622 -> CO2 (ppm): 401
11:46:02:643 -> CO2 (ppm): 400
11:46:06:663 -> CO2 (ppm): 399
11:46:10:684 -> CO2 (ppm): 398
11:46:14:704 -> CO2 (ppm): 396
11:46:18:726 -> CO2 (ppm): 395
11:46:22:745 -> CO2 (ppm): 393
11:46:26:765 -> CO2 (ppm): 392
11:46:30:785 -> CO2 (ppm): 391
11:46:34:806 -> CO2 (ppm): 390
11:46:36:907 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:46:36:908 -> [Configure] Info: Parse configure success
11:46:36:908 -> [Configure] Info: co2CalibrationRequested: True
11:46:36:908 -> [Configure] Info: Detected new firmware version: 3.1.9
11:46:36:908 -> state: 12
11:46:36:908 -> [StateMachine] Info: CO2 Calibration
11:46:36:908 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:46:37:903 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:46:38:903 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:46:39:904 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:46:40:904 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:46:43:912 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:46:43:926 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:46:43:935 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:46:43:948 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:46:43:949 -> [StateMachine] Info: CO2 Calibration: success
11:46:44:948 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:46:44:957 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:46:44:970 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:46:44:971 -> Flags: 0
11:46:45:979 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:46:45:991 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:46:45:993 -> Flags: 0
11:46:47:000 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:46:47:012 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:46:47:014 -> Flags: 0
11:46:48:021 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:46:48:034 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:46:48:035 -> Flags: 0
11:46:49:042 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:46:49:054 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:46:49:055 -> Flags: 0
11:46:50:054 -> Calibration Timeout
11:46:50:055 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:46:52:691 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:46:52:691 -> [ApiClient] Info: Return code: 200
11:46:52:692 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:46:52:693 -> [Configure] Info: Parse configure success
11:46:52:694 -> [Configure] Info: Detected new firmware version: 3.1.9
11:46:52:696 -> state: 12
11:46:53:637 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:46:53:637 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":390,"boot":3,"bootCount":3}
11:46:53:638 -> [ApiClient] Info: Return code: 200
11:46:53:638 -> 
11:46:53:638 -> Online mode and isPostToAirGradient = true: watchdog reset
11:46:53:639 -> 
11:46:53:660 -> CO2 (ppm): 388
11:46:56:564 -> External watchdog feed!
11:46:57:680 -> CO2 (ppm): 389
11:47:01:700 -> CO2 (ppm): 389
11:47:05:721 -> CO2 (ppm): 389
11:47:09:741 -> CO2 (ppm): 391
11:47:13:761 -> CO2 (ppm): 391
11:47:17:782 -> CO2 (ppm): 391
11:47:21:802 -> CO2 (ppm): 390
11:47:25:823 -> CO2 (ppm): 390
11:47:29:843 -> CO2 (ppm): 390
11:47:33:862 -> CO2 (ppm): 390
11:47:37:883 -> CO2 (ppm): 390
11:47:41:904 -> CO2 (ppm): 390
11:47:45:924 -> CO2 (ppm): 390
11:47:49:944 -> CO2 (ppm): 390
11:47:52:074 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:47:52:074 -> [Configure] Info: Parse configure success
11:47:52:075 -> [Configure] Info: co2CalibrationRequested: True
11:47:52:075 -> [Configure] Info: Detected new firmware version: 3.1.9
11:47:52:075 -> state: 12
11:47:52:075 -> [StateMachine] Info: CO2 Calibration
11:47:52:076 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:47:54:075 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:47:54:075 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:47:55:075 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:47:56:075 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:47:59:083 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:47:59:097 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:47:59:105 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:47:59:120 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:47:59:121 -> [StateMachine] Info: CO2 Calibration: success
11:48:00:120 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:48:00:128 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:48:00:158 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
11:48:00:158 -> Flags: 20
11:48:00:158 -> Success calibration!
11:48:00:158 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
11:48:02:733 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:48:02:733 -> [ApiClient] Info: Return code: 200
11:48:02:735 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:48:02:736 -> [Configure] Info: Parse configure success
11:48:02:737 -> [Configure] Info: Detected new firmware version: 3.1.9
11:48:02:738 -> state: 12
11:48:03:678 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:48:03:678 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":390,"boot":4,"bootCount":4}
11:48:03:678 -> [ApiClient] Info: Return code: 200
11:48:03:679 -> 
11:48:03:679 -> Online mode and isPostToAirGradient = true: watchdog reset
11:48:03:680 -> 
11:48:03:701 -> CO2 (ppm): 401
11:48:03:726 -> External watchdog feed!
11:48:07:722 -> CO2 (ppm): 401
11:48:11:743 -> CO2 (ppm): 401
11:48:15:764 -> CO2 (ppm): 401
11:48:19:785 -> CO2 (ppm): 401
11:48:23:805 -> CO2 (ppm): 401
11:48:27:825 -> CO2 (ppm): 423
11:48:31:847 -> CO2 (ppm): 475
11:48:35:867 -> CO2 (ppm): 496
11:48:39:887 -> CO2 (ppm): 503
11:48:43:908 -> CO2 (ppm): 500
11:48:47:928 -> CO2 (ppm): 494
11:48:51:948 -> CO2 (ppm): 485
11:48:55:999 -> CO2 (ppm): 476
11:49:00:020 -> CO2 (ppm): 465
11:49:02:178 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:49:02:179 -> [Configure] Info: Parse configure success
11:49:02:179 -> [Configure] Info: co2CalibrationRequested: True
11:49:02:180 -> [Configure] Info: Detected new firmware version: 3.1.9
11:49:02:180 -> state: 12
11:49:02:180 -> [StateMachine] Info: CO2 Calibration
11:49:02:180 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:49:03:179 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:49:04:180 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:49:05:179 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:49:06:179 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:49:09:187 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:49:09:202 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:49:09:211 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:49:09:224 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:49:09:225 -> [StateMachine] Info: CO2 Calibration: success
11:49:10:224 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:49:10:232 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:49:10:245 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:49:10:245 -> Flags: 0
11:49:11:253 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:49:11:266 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:49:11:266 -> Flags: 0
11:49:12:274 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:49:12:287 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:49:12:287 -> Flags: 0
11:49:13:295 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:49:13:308 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:49:13:308 -> Flags: 0
11:49:14:316 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:49:14:329 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:49:14:330 -> Flags: 0
11:49:15:329 -> Calibration Timeout
11:49:15:330 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:49:17:996 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:49:17:997 -> [ApiClient] Info: Return code: 200
11:49:17:998 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:49:17:999 -> [Configure] Info: Parse configure success
11:49:18:000 -> [Configure] Info: Detected new firmware version: 3.1.9
11:49:18:002 -> state: 12
11:49:18:932 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:49:18:932 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":465,"boot":5,"bootCount":5}
11:49:18:932 -> [ApiClient] Info: Return code: 200
11:49:18:933 -> 
11:49:18:933 -> Online mode and isPostToAirGradient = true: watchdog reset
11:49:18:933 -> 
11:49:18:955 -> CO2 (ppm): 428
11:49:18:980 -> External watchdog feed!
11:49:22:976 -> CO2 (ppm): 424
11:49:26:997 -> CO2 (ppm): 419
11:49:31:018 -> CO2 (ppm): 416
11:49:35:038 -> CO2 (ppm): 413
11:49:39:059 -> CO2 (ppm): 416
11:49:43:079 -> CO2 (ppm): 417
11:49:47:100 -> CO2 (ppm): 418
11:49:51:121 -> CO2 (ppm): 416
11:49:55:141 -> CO2 (ppm): 415
11:49:59:162 -> CO2 (ppm): 415
11:50:03:182 -> CO2 (ppm): 414
11:50:07:202 -> CO2 (ppm): 412
11:50:11:223 -> CO2 (ppm): 410
11:50:15:244 -> CO2 (ppm): 409
11:50:17:349 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:50:17:350 -> [Configure] Info: Parse configure success
11:50:17:350 -> [Configure] Info: co2CalibrationRequested: True
11:50:17:350 -> [Configure] Info: Detected new firmware version: 3.1.9
11:50:17:351 -> state: 12
11:50:17:351 -> [StateMachine] Info: CO2 Calibration
11:50:17:351 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:50:18:351 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:50:19:350 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:50:20:350 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:50:21:350 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:50:24:358 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:50:24:372 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:50:24:380 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:50:24:394 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:50:24:394 -> [StateMachine] Info: CO2 Calibration: success
11:50:25:394 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:50:25:402 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:50:25:415 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:50:25:415 -> Flags: 0
11:50:26:423 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:50:26:436 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:50:26:436 -> Flags: 0
11:50:27:444 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:50:27:457 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:50:27:457 -> Flags: 0
11:50:28:465 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:50:28:478 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:50:28:478 -> Flags: 0
11:50:29:486 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:50:29:499 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:50:29:500 -> Flags: 0
11:50:30:499 -> Calibration Timeout
11:50:30:499 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:50:33:158 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:50:33:158 -> [ApiClient] Info: Return code: 200
11:50:33:160 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:50:33:161 -> [Configure] Info: Parse configure success
11:50:33:162 -> [Configure] Info: Detected new firmware version: 3.1.9
11:50:33:164 -> state: 12
11:50:34:095 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:50:34:095 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":409,"boot":6,"bootCount":6}
11:50:34:095 -> [ApiClient] Info: Return code: 200
11:50:34:096 -> 
11:50:34:096 -> Online mode and isPostToAirGradient = true: watchdog reset
11:50:34:096 -> 
11:50:34:117 -> CO2 (ppm): 403
11:50:34:142 -> External watchdog feed!
11:50:38:138 -> CO2 (ppm): 402
11:50:42:158 -> CO2 (ppm): 402
11:50:46:178 -> CO2 (ppm): 402
11:50:50:198 -> CO2 (ppm): 402
11:50:58:239 -> CO2 (ppm): 401
11:50:58:239 -> CO2 (ppm): 400
11:51:02:259 -> CO2 (ppm): 401
11:51:06:280 -> CO2 (ppm): 401
11:51:10:300 -> CO2 (ppm): 401
11:51:14:319 -> CO2 (ppm): 400
11:51:18:339 -> CO2 (ppm): 400
11:51:26:380 -> CO2 (ppm): 405
11:51:26:380 -> CO2 (ppm): 412
11:51:30:401 -> CO2 (ppm): 427
11:51:32:519 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:51:32:521 -> [Configure] Info: Parse configure success
11:51:32:522 -> [Configure] Info: co2CalibrationRequested: True
11:51:32:522 -> [Configure] Info: Detected new firmware version: 3.1.9
11:51:32:522 -> state: 12
11:51:32:522 -> [StateMachine] Info: CO2 Calibration
11:51:32:522 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:51:33:521 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:51:34:521 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:51:35:521 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:51:36:521 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:51:39:529 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:51:39:549 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:51:39:557 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:51:39:572 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:51:39:573 -> [StateMachine] Info: CO2 Calibration: success
11:51:40:572 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:51:40:580 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:51:40:593 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:51:40:594 -> Flags: 0
11:51:41:601 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:51:41:614 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:51:41:614 -> Flags: 0
11:51:42:642 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:51:42:643 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:51:42:643 -> Flags: 0
11:51:43:644 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:51:43:656 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:51:43:658 -> Flags: 0
11:51:44:665 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:51:44:678 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:51:44:678 -> Flags: 0
11:51:45:677 -> Calibration Timeout
11:51:45:678 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:51:48:321 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:51:48:321 -> [ApiClient] Info: Return code: 200
11:51:48:322 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:51:48:323 -> [Configure] Info: Parse configure success
11:51:48:324 -> [Configure] Info: Detected new firmware version: 3.1.9
11:51:48:326 -> state: 12
11:51:49:266 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:51:49:266 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":427,"boot":7,"bootCount":7}
11:51:49:266 -> [ApiClient] Info: Return code: 200
11:51:49:267 -> 
11:51:49:267 -> Online mode and isPostToAirGradient = true: watchdog reset
11:51:49:267 -> 
11:51:49:289 -> CO2 (ppm): 484
11:51:49:314 -> External watchdog feed!
11:51:53:310 -> CO2 (ppm): 485
11:51:57:331 -> CO2 (ppm): 499
11:52:01:352 -> CO2 (ppm): 513
11:52:05:373 -> CO2 (ppm): 548
11:52:09:393 -> CO2 (ppm): 569
11:52:13:413 -> CO2 (ppm): 573
11:52:17:435 -> CO2 (ppm): 577
11:52:21:455 -> CO2 (ppm): 579
11:52:25:475 -> CO2 (ppm): 569
11:52:29:494 -> CO2 (ppm): 554
11:52:33:514 -> CO2 (ppm): 536
11:52:37:534 -> CO2 (ppm): 520
11:52:41:555 -> CO2 (ppm): 504
11:52:45:575 -> CO2 (ppm): 492
11:52:47:697 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:52:47:697 -> [Configure] Info: Parse configure success
11:52:47:697 -> [Configure] Info: co2CalibrationRequested: True
11:52:47:698 -> [Configure] Info: Detected new firmware version: 3.1.9
11:52:47:698 -> state: 12
11:52:47:698 -> [StateMachine] Info: CO2 Calibration
11:52:47:699 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:52:48:698 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:52:50:698 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:52:50:698 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:52:51:698 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:52:54:706 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:52:54:721 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:52:54:729 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:52:54:744 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:52:54:745 -> [StateMachine] Info: CO2 Calibration: success
11:52:55:744 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:52:55:752 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:52:55:766 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:52:55:766 -> Flags: 0
11:52:56:774 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:52:56:787 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:52:56:787 -> Flags: 0
11:52:57:795 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:52:57:808 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:52:57:808 -> Flags: 0
11:52:58:816 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:52:58:829 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:52:58:829 -> Flags: 0
11:52:59:837 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:52:59:850 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:52:59:850 -> Flags: 0
11:53:00:850 -> Calibration Timeout
11:53:00:850 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:53:03:480 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:53:03:480 -> [ApiClient] Info: Return code: 200
11:53:03:482 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:53:03:483 -> [Configure] Info: Parse configure success
11:53:03:485 -> [Configure] Info: Detected new firmware version: 3.1.9
11:53:03:486 -> state: 12
11:53:04:437 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:53:04:438 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":492,"boot":8,"bootCount":8}
11:53:04:438 -> [ApiClient] Info: Return code: 200
11:53:04:438 -> 
11:53:04:439 -> Online mode and isPostToAirGradient = true: watchdog reset
11:53:04:439 -> 
11:53:04:460 -> CO2 (ppm): 441
11:53:04:484 -> External watchdog feed!
11:53:08:481 -> CO2 (ppm): 433
11:53:12:501 -> CO2 (ppm): 427
11:53:16:521 -> CO2 (ppm): 422
11:53:20:542 -> CO2 (ppm): 418
11:53:24:563 -> CO2 (ppm): 414
11:53:28:583 -> CO2 (ppm): 411
11:53:32:603 -> CO2 (ppm): 409
11:53:36:623 -> CO2 (ppm): 407
11:53:40:643 -> CO2 (ppm): 405
11:53:44:663 -> CO2 (ppm): 404
11:53:48:684 -> CO2 (ppm): 403
11:53:52:704 -> CO2 (ppm): 402
11:53:56:725 -> CO2 (ppm): 403
11:54:00:745 -> CO2 (ppm): 402
11:54:02:870 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:54:02:871 -> [Configure] Info: Parse configure success
11:54:02:871 -> [Configure] Info: co2CalibrationRequested: True
11:54:02:872 -> [Configure] Info: Detected new firmware version: 3.1.9
11:54:02:872 -> state: 12
11:54:02:872 -> [StateMachine] Info: CO2 Calibration
11:54:02:873 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:54:03:871 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:54:04:871 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:54:05:871 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:54:06:871 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:54:09:888 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:54:09:892 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:54:09:901 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:54:09:914 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:54:09:915 -> [StateMachine] Info: CO2 Calibration: success
11:54:10:924 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:54:10:925 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:54:10:937 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:54:10:937 -> Flags: 0
11:54:11:945 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:54:11:962 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:54:11:963 -> Flags: 0
11:54:12:966 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:54:12:978 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:54:12:979 -> Flags: 0
11:54:13:987 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:54:14:000 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:54:14:000 -> Flags: 0
11:54:15:008 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:54:15:020 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:54:15:021 -> Flags: 0
11:54:16:021 -> Calibration Timeout
11:54:16:022 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:54:18:642 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:54:18:643 -> [ApiClient] Info: Return code: 200
11:54:18:644 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:54:18:645 -> [Configure] Info: Parse configure success
11:54:18:646 -> [Configure] Info: Detected new firmware version: 3.1.9
11:54:18:647 -> state: 12
11:54:19:608 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:54:19:608 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":402,"boot":9,"bootCount":9}
11:54:19:609 -> [ApiClient] Info: Return code: 200
11:54:19:609 -> 
11:54:19:609 -> Online mode and isPostToAirGradient = true: watchdog reset
11:54:19:609 -> 
11:54:19:631 -> CO2 (ppm): 412
11:54:19:655 -> External watchdog feed!
11:54:23:652 -> CO2 (ppm): 442
11:54:27:673 -> CO2 (ppm): 468
11:54:31:693 -> CO2 (ppm): 483
11:54:35:712 -> CO2 (ppm): 487
11:54:39:733 -> CO2 (ppm): 484
11:54:43:755 -> CO2 (ppm): 478
11:54:47:774 -> CO2 (ppm): 471
11:54:51:794 -> CO2 (ppm): 463
11:54:59:835 -> CO2 (ppm): 454
11:54:59:835 -> CO2 (ppm): 446
11:55:03:856 -> CO2 (ppm): 438
11:55:07:876 -> CO2 (ppm): 432
11:55:11:896 -> CO2 (ppm): 426
11:55:15:917 -> CO2 (ppm): 423
11:55:18:041 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:55:18:042 -> [Configure] Info: Parse configure success
11:55:18:043 -> [Configure] Info: co2CalibrationRequested: True
11:55:18:043 -> [Configure] Info: Detected new firmware version: 3.1.9
11:55:18:044 -> state: 12
11:55:18:044 -> [StateMachine] Info: CO2 Calibration
11:55:18:044 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:55:19:042 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:55:20:042 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:55:21:043 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:55:22:043 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:55:25:051 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:55:25:064 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:55:25:073 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:55:25:086 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:55:25:087 -> [StateMachine] Info: CO2 Calibration: success
11:55:26:087 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:55:26:095 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:55:26:107 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:55:26:108 -> Flags: 0
11:55:27:116 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:55:27:128 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:55:27:129 -> Flags: 0
11:55:28:137 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:55:28:149 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:55:28:150 -> Flags: 0
11:55:29:158 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:55:29:170 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:55:29:171 -> Flags: 0
11:55:30:179 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:55:30:191 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:55:30:193 -> Flags: 0
11:55:31:191 -> Calibration Timeout
11:55:31:192 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:55:33:845 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:55:33:845 -> [ApiClient] Info: Return code: 200
11:55:33:846 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:55:33:848 -> [Configure] Info: Parse configure success
11:55:33:848 -> [Configure] Info: Detected new firmware version: 3.1.9
11:55:33:850 -> state: 12
11:55:34:862 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:55:34:862 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":423,"boot":10,"bootCount":10}
11:55:34:862 -> [ApiClient] Info: Return code: 200
11:55:34:864 -> 
11:55:34:864 -> Online mode and isPostToAirGradient = true: watchdog reset
11:55:34:864 -> 
11:55:34:923 -> CO2 (ppm): 422
11:55:34:948 -> External watchdog feed!
11:55:38:945 -> CO2 (ppm): 420
11:55:46:985 -> CO2 (ppm): 476
11:55:46:985 -> CO2 (ppm): 484
11:55:51:006 -> CO2 (ppm): 486
11:55:55:027 -> CO2 (ppm): 482
11:55:59:046 -> CO2 (ppm): 516
11:56:03:067 -> CO2 (ppm): 589
11:56:07:088 -> CO2 (ppm): 630
11:56:11:108 -> CO2 (ppm): 640
11:56:15:129 -> CO2 (ppm): 631
11:56:19:149 -> CO2 (ppm): 622
11:56:23:170 -> CO2 (ppm): 637
11:56:27:191 -> CO2 (ppm): 629
11:56:31:212 -> CO2 (ppm): 612
11:56:33:211 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:56:33:212 -> [Configure] Info: Parse configure success
11:56:33:212 -> [Configure] Info: co2CalibrationRequested: True
11:56:33:213 -> [Configure] Info: Detected new firmware version: 3.1.9
11:56:33:213 -> state: 12
11:56:33:213 -> [StateMachine] Info: CO2 Calibration
11:56:33:213 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:56:34:213 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:56:35:213 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:56:36:212 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:56:37:212 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:56:40:221 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:56:40:234 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:56:40:242 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:56:40:257 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:56:40:257 -> [StateMachine] Info: CO2 Calibration: success
11:56:41:257 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:56:41:266 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:56:41:278 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:56:41:278 -> Flags: 0
11:56:42:287 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:56:42:299 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:56:42:299 -> Flags: 0
11:56:43:308 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:56:43:321 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:56:43:322 -> Flags: 0
11:56:44:330 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:56:44:342 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:56:44:343 -> Flags: 0
11:56:45:351 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:56:45:363 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:56:45:363 -> Flags: 0
11:56:46:363 -> Calibration Timeout
11:56:46:363 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:56:48:966 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:56:48:966 -> [ApiClient] Info: Return code: 200
11:56:48:967 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:56:48:969 -> [Configure] Info: Parse configure success
11:56:48:969 -> [Configure] Info: Detected new firmware version: 3.1.9
11:56:48:971 -> state: 12
11:56:49:902 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:56:49:902 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":612,"boot":11,"bootCount":11}
11:56:49:902 -> [ApiClient] Info: Return code: 200
11:56:49:903 -> 
11:56:49:903 -> Online mode and isPostToAirGradient = true: watchdog reset
11:56:49:903 -> 
11:56:49:925 -> CO2 (ppm): 528
11:56:49:950 -> External watchdog feed!
11:56:53:946 -> CO2 (ppm): 509
11:56:57:966 -> CO2 (ppm): 492
11:57:01:987 -> CO2 (ppm): 478
11:57:06:008 -> CO2 (ppm): 465
11:57:10:028 -> CO2 (ppm): 454
11:57:14:049 -> CO2 (ppm): 482
11:57:18:069 -> CO2 (ppm): 510
11:57:22:089 -> CO2 (ppm): 516
11:57:26:109 -> CO2 (ppm): 514
11:57:30:130 -> CO2 (ppm): 509
11:57:34:151 -> CO2 (ppm): 501
11:57:38:171 -> CO2 (ppm): 494
11:57:42:191 -> CO2 (ppm): 501
11:57:46:211 -> CO2 (ppm): 515
11:57:48:385 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:57:48:387 -> [Configure] Info: Parse configure success
11:57:48:387 -> [Configure] Info: co2CalibrationRequested: True
11:57:48:387 -> [Configure] Info: Detected new firmware version: 3.1.9
11:57:48:387 -> state: 12
11:57:48:387 -> [StateMachine] Info: CO2 Calibration
11:57:48:387 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:57:49:386 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:57:50:386 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:57:51:386 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:57:52:386 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:57:55:394 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:57:55:409 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:57:55:417 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:57:55:430 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:57:55:431 -> [StateMachine] Info: CO2 Calibration: success
11:57:56:431 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:57:56:439 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:57:56:451 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:57:56:452 -> Flags: 0
11:57:57:460 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:57:57:473 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:57:57:474 -> Flags: 0
11:57:58:481 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:57:58:532 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:57:58:533 -> Flags: 0
11:57:59:541 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:57:59:553 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:57:59:554 -> Flags: 0
11:58:00:562 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:58:00:574 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:58:00:575 -> Flags: 0
11:58:01:575 -> Calibration Timeout
11:58:01:576 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:58:04:229 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:58:04:230 -> [ApiClient] Info: Return code: 200
11:58:04:231 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:58:04:232 -> [Configure] Info: Parse configure success
11:58:04:233 -> [Configure] Info: Detected new firmware version: 3.1.9
11:58:04:234 -> state: 12
11:58:05:183 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:58:05:183 -> [ApiClient] Info: DATA: {"wifi":-56,"rco2":515,"boot":12,"bootCount":12}
11:58:05:185 -> [ApiClient] Info: Return code: 200
11:58:05:185 -> 
11:58:05:185 -> Online mode and isPostToAirGradient = true: watchdog reset
11:58:05:185 -> 
11:58:05:206 -> CO2 (ppm): 523
11:58:05:231 -> External watchdog feed!
11:58:09:226 -> CO2 (ppm): 521
11:58:13:246 -> CO2 (ppm): 512
11:58:17:266 -> CO2 (ppm): 501
11:58:21:287 -> CO2 (ppm): 490
11:58:25:307 -> CO2 (ppm): 479
11:58:29:327 -> CO2 (ppm): 467
11:58:33:347 -> CO2 (ppm): 456
11:58:37:368 -> CO2 (ppm): 447
11:58:41:389 -> CO2 (ppm): 439
11:58:45:410 -> CO2 (ppm): 431
11:58:49:431 -> CO2 (ppm): 426
11:58:53:451 -> CO2 (ppm): 421
11:58:57:472 -> CO2 (ppm): 415
11:59:01:492 -> CO2 (ppm): 411
11:59:03:594 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:59:03:595 -> [Configure] Info: Parse configure success
11:59:03:595 -> [Configure] Info: co2CalibrationRequested: True
11:59:03:596 -> [Configure] Info: Detected new firmware version: 3.1.9
11:59:03:596 -> state: 12
11:59:03:596 -> [StateMachine] Info: CO2 Calibration
11:59:03:597 -> [StateMachine] Info: Start CO2 calib after 5 sec
11:59:04:596 -> [StateMachine] Info: Start CO2 calib after 4 sec
11:59:05:595 -> [StateMachine] Info: Start CO2 calib after 3 sec
11:59:06:595 -> [StateMachine] Info: Start CO2 calib after 2 sec
11:59:07:596 -> [StateMachine] Info: Start CO2 calib after 1 sec
11:59:10:604 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:59:10:617 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
11:59:10:626 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:59:10:640 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
11:59:10:641 -> [StateMachine] Info: CO2 Calibration: success
11:59:11:640 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
11:59:11:649 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:59:11:661 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:59:11:662 -> Flags: 0
11:59:12:670 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:59:12:683 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:59:12:684 -> Flags: 0
11:59:13:691 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:59:13:703 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:59:13:704 -> Flags: 0
11:59:14:712 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:59:14:724 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:59:14:725 -> Flags: 0
11:59:15:733 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
11:59:15:745 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
11:59:15:745 -> Flags: 0
11:59:16:745 -> Calibration Timeout
11:59:16:746 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
11:59:19:390 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
11:59:19:390 -> [ApiClient] Info: Return code: 200
11:59:19:391 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
11:59:19:393 -> [Configure] Info: Parse configure success
11:59:19:393 -> [Configure] Info: Detected new firmware version: 3.1.9
11:59:19:395 -> state: 12
11:59:20:335 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
11:59:20:336 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":411,"boot":13,"bootCount":13}
11:59:20:336 -> [ApiClient] Info: Return code: 200
11:59:20:336 -> 
11:59:20:337 -> Online mode and isPostToAirGradient = true: watchdog reset
11:59:20:337 -> 
11:59:20:358 -> CO2 (ppm): 545
11:59:20:383 -> External watchdog feed!
11:59:24:378 -> CO2 (ppm): 536
11:59:28:399 -> CO2 (ppm): 533
11:59:32:420 -> CO2 (ppm): 531
11:59:36:449 -> CO2 (ppm): 549
11:59:40:461 -> CO2 (ppm): 568
11:59:44:482 -> CO2 (ppm): 579
11:59:48:503 -> CO2 (ppm): 603
11:59:52:524 -> CO2 (ppm): 616
11:59:56:545 -> CO2 (ppm): 617
12:00:00:566 -> CO2 (ppm): 610
12:00:04:586 -> CO2 (ppm): 595
12:00:08:606 -> CO2 (ppm): 576
12:00:12:627 -> CO2 (ppm): 556
12:00:16:647 -> CO2 (ppm): 537
12:00:18:765 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:00:18:766 -> [Configure] Info: Parse configure success
12:00:18:766 -> [Configure] Info: co2CalibrationRequested: True
12:00:18:767 -> [Configure] Info: Detected new firmware version: 3.1.9
12:00:18:767 -> state: 12
12:00:18:767 -> [StateMachine] Info: CO2 Calibration
12:00:18:767 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:00:19:768 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:00:20:768 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:00:21:768 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:00:22:768 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:00:25:776 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:00:25:789 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:00:25:798 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:00:25:812 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:00:25:813 -> [StateMachine] Info: CO2 Calibration: success
12:00:26:813 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:00:26:821 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:00:26:833 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:00:26:833 -> Flags: 0
12:00:27:842 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:00:27:854 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:00:27:854 -> Flags: 0
12:00:28:863 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:00:28:875 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:00:28:876 -> Flags: 0
12:00:29:884 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:00:29:896 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:00:29:896 -> Flags: 0
12:00:30:905 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:00:30:917 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:00:30:917 -> Flags: 0
12:00:31:926 -> Calibration Timeout
12:00:31:926 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:00:35:019 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:00:35:019 -> [ApiClient] Info: Return code: 200
12:00:35:020 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:00:35:022 -> [Configure] Info: Parse configure success
12:00:35:022 -> [Configure] Info: Detected new firmware version: 3.1.9
12:00:35:024 -> state: 12
12:00:36:095 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:00:36:095 -> [ApiClient] Info: DATA: {"wifi":-56,"rco2":537,"boot":14,"bootCount":14}
12:00:36:095 -> [ApiClient] Info: Return code: 200
12:00:36:096 -> 
12:00:36:096 -> Online mode and isPostToAirGradient = true: watchdog reset
12:00:36:096 -> 
12:00:36:118 -> CO2 (ppm): 459
12:00:36:143 -> External watchdog feed!
12:00:40:139 -> CO2 (ppm): 449
12:00:44:159 -> CO2 (ppm): 440
12:00:48:179 -> CO2 (ppm): 432
12:00:52:200 -> CO2 (ppm): 426
12:00:56:220 -> CO2 (ppm): 421
12:01:00:240 -> CO2 (ppm): 416
12:01:04:269 -> CO2 (ppm): 412
12:01:08:281 -> CO2 (ppm): 410
12:01:12:301 -> CO2 (ppm): 408
12:01:16:321 -> CO2 (ppm): 405
12:01:20:341 -> CO2 (ppm): 404
12:01:28:381 -> CO2 (ppm): 406
12:01:28:381 -> CO2 (ppm): 409
12:01:32:400 -> CO2 (ppm): 414
12:01:33:937 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:01:33:938 -> [Configure] Info: Parse configure success
12:01:33:938 -> [Configure] Info: co2CalibrationRequested: True
12:01:33:939 -> [Configure] Info: Detected new firmware version: 3.1.9
12:01:33:939 -> state: 12
12:01:33:939 -> [StateMachine] Info: CO2 Calibration
12:01:33:940 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:01:34:938 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:01:35:938 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:01:36:938 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:01:37:938 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:01:40:946 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:01:40:960 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:01:40:969 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:01:40:983 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:01:40:983 -> [StateMachine] Info: CO2 Calibration: success
12:01:41:983 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:01:41:992 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:01:42:004 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:01:42:005 -> Flags: 0
12:01:43:012 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:01:43:025 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:01:43:026 -> Flags: 0
12:01:44:033 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:01:44:046 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:01:44:046 -> Flags: 0
12:01:45:062 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:01:45:067 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:01:45:067 -> Flags: 0
12:01:46:075 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:01:46:088 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:01:46:102 -> Flags: 0
12:01:47:088 -> Calibration Timeout
12:01:47:089 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:01:49:713 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:01:49:731 -> [ApiClient] Info: Return code: 200
12:01:49:732 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:01:49:732 -> [Configure] Info: Parse configure success
12:01:49:732 -> [Configure] Info: Detected new firmware version: 3.1.9
12:01:49:732 -> state: 12
12:01:50:632 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:01:50:632 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":414,"boot":15,"bootCount":15}
12:01:50:632 -> [ApiClient] Info: Return code: 200
12:01:50:633 -> 
12:01:50:633 -> Online mode and isPostToAirGradient = true: watchdog reset
12:01:50:633 -> 
12:01:50:655 -> CO2 (ppm): 456
12:01:50:680 -> External watchdog feed!
12:01:54:675 -> CO2 (ppm): 467
12:01:58:695 -> CO2 (ppm): 468
12:02:02:716 -> CO2 (ppm): 466
12:02:06:736 -> CO2 (ppm): 462
12:02:10:757 -> CO2 (ppm): 457
12:02:14:778 -> CO2 (ppm): 451
12:02:18:799 -> CO2 (ppm): 447
12:02:22:819 -> CO2 (ppm): 444
12:02:26:840 -> CO2 (ppm): 439
12:02:30:861 -> CO2 (ppm): 434
12:02:34:881 -> CO2 (ppm): 430
12:02:38:901 -> CO2 (ppm): 425
12:02:42:921 -> CO2 (ppm): 422
12:02:46:942 -> CO2 (ppm): 417
12:02:49:108 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:02:49:109 -> [Configure] Info: Parse configure success
12:02:49:110 -> [Configure] Info: co2CalibrationRequested: True
12:02:49:110 -> [Configure] Info: Detected new firmware version: 3.1.9
12:02:49:111 -> state: 12
12:02:49:111 -> [StateMachine] Info: CO2 Calibration
12:02:49:111 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:02:50:110 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:02:51:110 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:02:52:110 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:02:53:110 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:02:56:118 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:02:56:132 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:02:56:140 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:02:56:155 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:02:56:155 -> [StateMachine] Info: CO2 Calibration: success
12:02:57:155 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:02:57:163 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:02:57:177 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:02:57:178 -> Flags: 0
12:02:58:185 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:02:58:198 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:02:58:198 -> Flags: 0
12:02:59:206 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:02:59:219 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:02:59:219 -> Flags: 0
12:03:00:227 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:03:00:240 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:03:00:240 -> Flags: 0
12:03:01:248 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:03:01:261 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:03:01:261 -> Flags: 0
12:03:02:261 -> Calibration Timeout
12:03:02:262 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:03:04:873 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:03:04:873 -> [ApiClient] Info: Return code: 200
12:03:04:875 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:03:04:876 -> [Configure] Info: Parse configure success
12:03:04:877 -> [Configure] Info: Detected new firmware version: 3.1.9
12:03:04:878 -> state: 12
12:03:05:808 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:03:05:808 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":417,"boot":16,"bootCount":16}
12:03:05:811 -> [ApiClient] Info: Return code: 200
12:03:05:812 -> 
12:03:05:812 -> Online mode and isPostToAirGradient = true: watchdog reset
12:03:05:812 -> 
12:03:05:831 -> CO2 (ppm): 403
12:03:05:856 -> External watchdog feed!
12:03:09:852 -> CO2 (ppm): 401
12:03:13:873 -> CO2 (ppm): 399
12:03:17:894 -> CO2 (ppm): 399
12:03:21:914 -> CO2 (ppm): 399
12:03:25:934 -> CO2 (ppm): 397
12:03:29:954 -> CO2 (ppm): 409
12:03:33:973 -> CO2 (ppm): 440
12:03:37:994 -> CO2 (ppm): 453
12:03:42:014 -> CO2 (ppm): 456
12:03:46:035 -> CO2 (ppm): 456
12:03:50:055 -> CO2 (ppm): 451
12:03:54:076 -> CO2 (ppm): 445
12:03:58:096 -> CO2 (ppm): 439
12:04:02:116 -> CO2 (ppm): 432
12:04:04:281 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:04:04:297 -> [Configure] Info: Parse configure success
12:04:04:297 -> [Configure] Info: co2CalibrationRequested: True
12:04:04:297 -> [Configure] Info: Detected new firmware version: 3.1.9
12:04:04:297 -> state: 12
12:04:04:297 -> [StateMachine] Info: CO2 Calibration
12:04:04:297 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:04:05:283 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:04:06:283 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:04:07:283 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:04:08:283 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:04:11:291 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:04:11:305 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:04:11:313 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:04:11:328 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:04:11:329 -> [StateMachine] Info: CO2 Calibration: success
12:04:12:328 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:04:12:336 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:04:12:349 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:04:12:349 -> Flags: 0
12:04:13:357 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:04:13:370 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:04:13:370 -> Flags: 0
12:04:14:379 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:04:14:391 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:04:14:391 -> Flags: 0
12:04:15:399 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:04:15:412 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:04:15:413 -> Flags: 0
12:04:16:420 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:04:16:433 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:04:16:433 -> Flags: 0
12:04:17:433 -> Calibration Timeout
12:04:17:434 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:04:20:034 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:04:20:034 -> [ApiClient] Info: Return code: 200
12:04:20:036 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:04:20:037 -> [Configure] Info: Parse configure success
12:04:20:038 -> [Configure] Info: Detected new firmware version: 3.1.9
12:04:20:040 -> state: 12
12:04:20:951 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:04:20:951 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":432,"boot":17,"bootCount":17}
12:04:20:951 -> [ApiClient] Info: Return code: 200
12:04:20:952 -> 
12:04:20:952 -> Online mode and isPostToAirGradient = true: watchdog reset
12:04:20:952 -> 
12:04:20:974 -> CO2 (ppm): 414
12:04:20:999 -> External watchdog feed!
12:04:24:994 -> CO2 (ppm): 410
12:04:29:015 -> CO2 (ppm): 408
12:04:33:035 -> CO2 (ppm): 405
12:04:37:056 -> CO2 (ppm): 403
12:04:41:077 -> CO2 (ppm): 401
12:04:45:098 -> CO2 (ppm): 400
12:04:49:118 -> CO2 (ppm): 398
12:04:53:139 -> CO2 (ppm): 397
12:04:57:158 -> CO2 (ppm): 397
12:05:01:178 -> CO2 (ppm): 396
12:05:05:198 -> CO2 (ppm): 395
12:05:09:219 -> CO2 (ppm): 394
12:05:13:239 -> CO2 (ppm): 394
12:05:17:260 -> CO2 (ppm): 394
12:05:19:453 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:05:19:455 -> [Configure] Info: Parse configure success
12:05:19:455 -> [Configure] Info: co2CalibrationRequested: True
12:05:19:456 -> [Configure] Info: Detected new firmware version: 3.1.9
12:05:19:456 -> state: 12
12:05:19:456 -> [StateMachine] Info: CO2 Calibration
12:05:19:456 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:05:20:455 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:05:21:456 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:05:22:455 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:05:23:455 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:05:26:463 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:05:26:477 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:05:26:485 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:05:26:500 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:05:26:500 -> [StateMachine] Info: CO2 Calibration: success
12:05:27:500 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:05:27:508 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:05:27:522 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:05:27:523 -> Flags: 0
12:05:28:530 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:05:28:543 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:05:28:543 -> Flags: 0
12:05:29:551 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:05:29:564 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:05:29:564 -> Flags: 0
12:05:30:572 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:05:30:585 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:05:30:585 -> Flags: 0
12:05:31:593 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:05:31:606 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:05:31:606 -> Flags: 0
12:05:32:606 -> Calibration Timeout
12:05:32:606 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:05:35:197 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:05:35:197 -> [ApiClient] Info: Return code: 200
12:05:35:199 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:05:35:200 -> [Configure] Info: Parse configure success
12:05:35:201 -> [Configure] Info: Detected new firmware version: 3.1.9
12:05:35:202 -> state: 12
12:05:36:162 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:05:36:163 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":394,"boot":18,"bootCount":18}
12:05:36:163 -> [ApiClient] Info: Return code: 200
12:05:36:164 -> 
12:05:36:164 -> Online mode and isPostToAirGradient = true: watchdog reset
12:05:36:164 -> 
12:05:36:186 -> CO2 (ppm): 392
12:05:36:211 -> External watchdog feed!
12:05:40:206 -> CO2 (ppm): 392
12:05:44:240 -> CO2 (ppm): 392
12:05:48:247 -> CO2 (ppm): 391
12:05:52:268 -> CO2 (ppm): 391
12:05:56:289 -> CO2 (ppm): 391
12:06:00:310 -> CO2 (ppm): 391
12:06:04:330 -> CO2 (ppm): 392
12:06:08:351 -> CO2 (ppm): 392
12:06:12:371 -> CO2 (ppm): 392
12:06:16:391 -> CO2 (ppm): 392
12:06:24:433 -> CO2 (ppm): 392
12:06:24:433 -> CO2 (ppm): 392
12:06:28:455 -> CO2 (ppm): 392
12:06:32:474 -> CO2 (ppm): 392
12:06:34:626 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:06:34:629 -> [Configure] Info: Parse configure success
12:06:34:629 -> [Configure] Info: co2CalibrationRequested: True
12:06:34:630 -> [Configure] Info: Detected new firmware version: 3.1.9
12:06:34:630 -> state: 12
12:06:34:630 -> [StateMachine] Info: CO2 Calibration
12:06:34:630 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:06:35:627 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:06:36:628 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:06:37:627 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:06:38:627 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:06:41:635 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:06:41:649 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:06:41:657 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:06:41:672 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:06:41:673 -> [StateMachine] Info: CO2 Calibration: success
12:06:42:672 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:06:42:680 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:06:42:693 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:06:42:694 -> Flags: 20
12:06:42:694 -> Success calibration!
12:06:42:694 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:06:45:340 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:06:45:340 -> [ApiClient] Info: Return code: 200
12:06:45:342 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:06:45:344 -> [Configure] Info: Parse configure success
12:06:45:344 -> [Configure] Info: Detected new firmware version: 3.1.9
12:06:45:346 -> state: 12
12:06:46:306 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:06:46:307 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":392,"boot":19,"bootCount":19}
12:06:46:307 -> [ApiClient] Info: Return code: 200
12:06:46:307 -> 
12:06:46:307 -> Online mode and isPostToAirGradient = true: watchdog reset
12:06:46:307 -> 
12:06:46:329 -> CO2 (ppm): 401
12:06:46:354 -> External watchdog feed!
12:06:50:349 -> CO2 (ppm): 401
12:06:54:369 -> CO2 (ppm): 401
12:07:02:410 -> CO2 (ppm): 401
12:07:02:410 -> CO2 (ppm): 401
12:07:06:431 -> CO2 (ppm): 401
12:07:10:452 -> CO2 (ppm): 401
12:07:14:472 -> CO2 (ppm): 401
12:07:18:493 -> CO2 (ppm): 401
12:07:22:513 -> CO2 (ppm): 401
12:07:26:533 -> CO2 (ppm): 401
12:07:30:553 -> CO2 (ppm): 401
12:07:34:573 -> CO2 (ppm): 401
12:07:42:614 -> CO2 (ppm): 401
12:07:42:614 -> CO2 (ppm): 401
12:07:44:714 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:07:44:715 -> [Configure] Info: Parse configure success
12:07:44:715 -> [Configure] Info: co2CalibrationRequested: True
12:07:44:716 -> [Configure] Info: Detected new firmware version: 3.1.9
12:07:44:716 -> state: 12
12:07:44:716 -> [StateMachine] Info: CO2 Calibration
12:07:44:716 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:07:45:715 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:07:46:715 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:07:48:716 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:07:48:716 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:07:51:723 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:07:51:737 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:07:51:745 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:07:51:760 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:07:51:761 -> [StateMachine] Info: CO2 Calibration: success
12:07:52:760 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:07:52:769 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:07:52:781 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:07:52:782 -> Flags: 20
12:07:52:782 -> Success calibration!
12:07:52:782 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:07:55:381 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:07:55:381 -> [ApiClient] Info: Return code: 200
12:07:55:383 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:07:55:384 -> [Configure] Info: Parse configure success
12:07:55:385 -> [Configure] Info: Detected new firmware version: 3.1.9
12:07:55:387 -> state: 12
12:07:56:307 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:07:56:308 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":401,"boot":20,"bootCount":20}
12:07:56:308 -> [ApiClient] Info: Return code: 200
12:07:56:308 -> 
12:07:56:308 -> Online mode and isPostToAirGradient = true: watchdog reset
12:07:56:308 -> 
12:07:56:330 -> CO2 (ppm): 400
12:07:56:355 -> External watchdog feed!
12:08:00:350 -> CO2 (ppm): 400
12:08:08:391 -> CO2 (ppm): 400
12:08:08:391 -> CO2 (ppm): 400
12:08:12:411 -> CO2 (ppm): 401
12:08:20:451 -> CO2 (ppm): 400
12:08:20:451 -> CO2 (ppm): 400
12:08:24:472 -> CO2 (ppm): 400
12:08:28:492 -> CO2 (ppm): 400
12:08:32:513 -> CO2 (ppm): 400
12:08:36:533 -> CO2 (ppm): 400
12:08:40:553 -> CO2 (ppm): 400
12:08:44:574 -> CO2 (ppm): 400
12:08:48:593 -> CO2 (ppm): 400
12:08:52:613 -> CO2 (ppm): 400
12:08:54:801 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:08:54:802 -> [Configure] Info: Parse configure success
12:08:54:802 -> [Configure] Info: co2CalibrationRequested: True
12:08:54:802 -> [Configure] Info: Detected new firmware version: 3.1.9
12:08:54:803 -> state: 12
12:08:54:803 -> [StateMachine] Info: CO2 Calibration
12:08:54:803 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:08:55:802 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:08:56:816 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:08:57:802 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:08:58:802 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:09:01:811 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:09:01:824 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:09:01:832 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:09:01:846 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:09:01:846 -> [StateMachine] Info: CO2 Calibration: success
12:09:02:846 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:09:02:854 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:09:02:867 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:09:02:867 -> Flags: 20
12:09:02:867 -> Success calibration!
12:09:02:867 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:09:05:524 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:09:05:525 -> [ApiClient] Info: Return code: 200
12:09:05:526 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:09:05:528 -> [Configure] Info: Parse configure success
12:09:05:528 -> [Configure] Info: Detected new firmware version: 3.1.9
12:09:05:530 -> state: 12
12:09:06:361 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:09:06:361 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":400,"boot":21,"bootCount":21}
12:09:06:362 -> [ApiClient] Info: Return code: 200
12:09:06:362 -> 
12:09:06:362 -> Online mode and isPostToAirGradient = true: watchdog reset
12:09:06:363 -> 
12:09:06:384 -> CO2 (ppm): 400
12:09:06:409 -> External watchdog feed!
12:09:10:405 -> CO2 (ppm): 400
12:09:14:426 -> CO2 (ppm): 400
12:09:18:447 -> CO2 (ppm): 400
12:09:22:468 -> CO2 (ppm): 400
12:09:26:488 -> CO2 (ppm): 400
12:09:30:508 -> CO2 (ppm): 400
12:09:34:529 -> CO2 (ppm): 400
12:09:38:549 -> CO2 (ppm): 400
12:09:42:570 -> CO2 (ppm): 400
12:09:46:590 -> CO2 (ppm): 400
12:09:50:613 -> CO2 (ppm): 400
12:09:54:632 -> CO2 (ppm): 400
12:09:58:652 -> CO2 (ppm): 400
12:10:02:672 -> CO2 (ppm): 400
12:10:04:887 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:10:04:888 -> [Configure] Info: Parse configure success
12:10:04:888 -> [Configure] Info: co2CalibrationRequested: True
12:10:04:888 -> [Configure] Info: Detected new firmware version: 3.1.9
12:10:04:889 -> state: 12
12:10:04:889 -> [StateMachine] Info: CO2 Calibration
12:10:04:889 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:10:05:888 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:10:06:888 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:10:07:888 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:10:08:888 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:10:11:896 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:10:11:910 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:10:11:918 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:10:11:932 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:10:11:950 -> [StateMachine] Info: CO2 Calibration: success
12:10:12:932 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:10:12:940 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:10:12:953 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:10:12:953 -> Flags: 20
12:10:12:953 -> Success calibration!
12:10:12:953 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:10:15:566 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:10:15:566 -> [ApiClient] Info: Return code: 200
12:10:15:568 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:10:15:570 -> [Configure] Info: Parse configure success
12:10:15:571 -> [Configure] Info: Detected new firmware version: 3.1.9
12:10:15:572 -> state: 12
12:10:16:494 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:10:16:494 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":400,"boot":22,"bootCount":22}
12:10:16:494 -> [ApiClient] Info: Return code: 200
12:10:16:495 -> 
12:10:16:495 -> Online mode and isPostToAirGradient = true: watchdog reset
12:10:16:495 -> 
12:10:16:517 -> CO2 (ppm): 400
12:10:16:542 -> External watchdog feed!
12:10:20:538 -> CO2 (ppm): 400
12:10:28:579 -> CO2 (ppm): 400
12:10:28:579 -> CO2 (ppm): 399
12:10:32:599 -> CO2 (ppm): 400
12:10:36:619 -> CO2 (ppm): 399
12:10:40:641 -> CO2 (ppm): 399
12:10:44:661 -> CO2 (ppm): 399
12:10:48:683 -> CO2 (ppm): 399
12:10:52:703 -> CO2 (ppm): 399
12:10:56:723 -> CO2 (ppm): 399
12:11:00:744 -> CO2 (ppm): 399
12:11:04:764 -> CO2 (ppm): 399
12:11:08:784 -> CO2 (ppm): 399
12:11:12:805 -> CO2 (ppm): 399
12:11:14:973 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:11:14:975 -> [Configure] Info: Parse configure success
12:11:14:975 -> [Configure] Info: co2CalibrationRequested: True
12:11:14:975 -> [Configure] Info: Detected new firmware version: 3.1.9
12:11:14:975 -> state: 12
12:11:14:975 -> [StateMachine] Info: CO2 Calibration
12:11:14:975 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:11:15:974 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:11:16:974 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:11:17:974 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:11:18:974 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:11:21:983 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:11:21:997 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:11:22:006 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:11:22:019 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:11:22:020 -> [StateMachine] Info: CO2 Calibration: success
12:11:23:019 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:11:23:028 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:11:23:040 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:11:23:041 -> Flags: 20
12:11:23:041 -> Success calibration!
12:11:23:041 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:11:25:814 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:11:25:814 -> [ApiClient] Info: Return code: 200
12:11:25:816 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:11:25:818 -> [Configure] Info: Parse configure success
12:11:25:818 -> [Configure] Info: Detected new firmware version: 3.1.9
12:11:25:820 -> state: 12
12:11:26:749 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:11:26:750 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":399,"boot":23,"bootCount":23}
12:11:26:750 -> [ApiClient] Info: Return code: 200
12:11:26:750 -> 
12:11:26:750 -> Online mode and isPostToAirGradient = true: watchdog reset
12:11:26:750 -> 
12:11:26:772 -> CO2 (ppm): 401
12:11:26:797 -> External watchdog feed!
12:11:30:792 -> CO2 (ppm): 401
12:11:34:813 -> CO2 (ppm): 401
12:11:38:833 -> CO2 (ppm): 400
12:11:42:854 -> CO2 (ppm): 401
12:11:46:874 -> CO2 (ppm): 401
12:11:50:895 -> CO2 (ppm): 400
12:11:54:917 -> CO2 (ppm): 400
12:11:58:937 -> CO2 (ppm): 400
12:12:02:958 -> CO2 (ppm): 400
12:12:06:979 -> CO2 (ppm): 400
12:12:10:999 -> CO2 (ppm): 401
12:12:15:020 -> CO2 (ppm): 401
12:12:19:040 -> CO2 (ppm): 401
12:12:23:060 -> CO2 (ppm): 400
12:12:25:059 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:12:25:060 -> [Configure] Info: Parse configure success
12:12:25:061 -> [Configure] Info: co2CalibrationRequested: True
12:12:25:061 -> [Configure] Info: Detected new firmware version: 3.1.9
12:12:25:062 -> state: 12
12:12:25:062 -> [StateMachine] Info: CO2 Calibration
12:12:25:062 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:12:26:061 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:12:27:061 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:12:29:061 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:12:29:061 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:12:32:069 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:12:32:112 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:12:32:120 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:12:32:135 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:12:32:135 -> [StateMachine] Info: CO2 Calibration: success
12:12:33:135 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:12:33:143 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:12:33:156 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:12:33:156 -> Flags: 20
12:12:33:156 -> Success calibration!
12:12:33:156 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:12:35:751 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:12:35:752 -> [ApiClient] Info: Return code: 200
12:12:35:753 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:12:35:754 -> [Configure] Info: Parse configure success
12:12:35:755 -> [Configure] Info: Detected new firmware version: 3.1.9
12:12:35:756 -> state: 12
12:12:36:697 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:12:36:697 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":400,"boot":24,"bootCount":24}
12:12:36:698 -> [ApiClient] Info: Return code: 200
12:12:36:698 -> 
12:12:36:698 -> Online mode and isPostToAirGradient = true: watchdog reset
12:12:36:698 -> 
12:12:36:719 -> CO2 (ppm): 400
12:12:36:744 -> External watchdog feed!
12:12:40:739 -> CO2 (ppm): 400
12:12:44:759 -> CO2 (ppm): 400
12:12:48:779 -> CO2 (ppm): 401
12:12:52:800 -> CO2 (ppm): 400
12:12:56:819 -> CO2 (ppm): 400
12:13:00:840 -> CO2 (ppm): 400
12:13:04:859 -> CO2 (ppm): 400
12:13:08:879 -> CO2 (ppm): 400
12:13:12:900 -> CO2 (ppm): 400
12:13:16:921 -> CO2 (ppm): 400
12:13:20:941 -> CO2 (ppm): 400
12:13:24:961 -> CO2 (ppm): 400
12:13:28:981 -> CO2 (ppm): 400
12:13:33:002 -> CO2 (ppm): 400
12:13:35:176 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:13:35:177 -> [Configure] Info: Parse configure success
12:13:35:177 -> [Configure] Info: co2CalibrationRequested: True
12:13:35:179 -> [Configure] Info: Detected new firmware version: 3.1.9
12:13:35:179 -> state: 12
12:13:35:179 -> [StateMachine] Info: CO2 Calibration
12:13:35:179 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:13:36:178 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:13:37:178 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:13:38:178 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:13:42:186 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:13:42:187 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:13:42:200 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:13:42:208 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:13:42:223 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:13:42:224 -> [StateMachine] Info: CO2 Calibration: success
12:13:43:223 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:13:43:231 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:13:43:244 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:13:43:244 -> Flags: 20
12:13:43:244 -> Success calibration!
12:13:43:244 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:13:45:895 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:13:45:896 -> [ApiClient] Info: Return code: 200
12:13:45:897 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:13:45:898 -> [Configure] Info: Parse configure success
12:13:45:899 -> [Configure] Info: Detected new firmware version: 3.1.9
12:13:45:900 -> state: 12
12:13:46:830 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:13:46:830 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":400,"boot":25,"bootCount":25}
12:13:46:831 -> [ApiClient] Info: Return code: 200
12:13:46:831 -> 
12:13:46:832 -> Online mode and isPostToAirGradient = true: watchdog reset
12:13:46:832 -> 
12:13:46:853 -> CO2 (ppm): 401
12:13:46:878 -> External watchdog feed!
12:13:50:874 -> CO2 (ppm): 401
12:13:54:895 -> CO2 (ppm): 401
12:13:58:916 -> CO2 (ppm): 401
12:14:02:935 -> CO2 (ppm): 401
12:14:06:956 -> CO2 (ppm): 400
12:14:10:976 -> CO2 (ppm): 400
12:14:14:996 -> CO2 (ppm): 400
12:14:19:017 -> CO2 (ppm): 400
12:14:23:037 -> CO2 (ppm): 400
12:14:27:057 -> CO2 (ppm): 400
12:14:31:080 -> CO2 (ppm): 401
12:14:35:097 -> CO2 (ppm): 401
12:14:39:116 -> CO2 (ppm): 400
12:14:43:137 -> CO2 (ppm): 400
12:14:45:261 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:14:45:262 -> [Configure] Info: Parse configure success
12:14:45:263 -> [Configure] Info: co2CalibrationRequested: True
12:14:45:263 -> [Configure] Info: Detected new firmware version: 3.1.9
12:14:45:263 -> state: 12
12:14:45:263 -> [StateMachine] Info: CO2 Calibration
12:14:45:263 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:14:46:263 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:14:47:263 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:14:48:263 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:14:49:263 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:14:52:271 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:14:52:284 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:14:52:293 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:14:52:307 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:14:52:308 -> [StateMachine] Info: CO2 Calibration: success
12:14:53:308 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:14:53:316 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:14:53:329 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:14:53:330 -> Flags: 20
12:14:53:330 -> Success calibration!
12:14:53:330 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:14:55:945 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:14:55:945 -> [ApiClient] Info: Return code: 200
12:14:55:946 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:14:55:948 -> [Configure] Info: Parse configure success
12:14:55:949 -> [Configure] Info: Detected new firmware version: 3.1.9
12:14:55:950 -> state: 12
12:14:56:890 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:14:56:890 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":400,"boot":26,"bootCount":26}
12:14:56:890 -> [ApiClient] Info: Return code: 200
12:14:56:892 -> 
12:14:56:892 -> Online mode and isPostToAirGradient = true: watchdog reset
12:14:56:892 -> 
12:14:56:912 -> CO2 (ppm): 402
12:14:56:937 -> External watchdog feed!
12:15:00:932 -> CO2 (ppm): 402
12:15:04:952 -> CO2 (ppm): 402
12:15:08:972 -> CO2 (ppm): 402
12:15:12:993 -> CO2 (ppm): 402
12:15:17:014 -> CO2 (ppm): 401
12:15:21:035 -> CO2 (ppm): 401
12:15:25:055 -> CO2 (ppm): 401
12:15:29:075 -> CO2 (ppm): 401
12:15:33:096 -> CO2 (ppm): 401
12:15:37:120 -> CO2 (ppm): 401
12:15:41:140 -> CO2 (ppm): 401
12:15:45:161 -> CO2 (ppm): 401
12:15:49:181 -> CO2 (ppm): 401
12:15:53:201 -> CO2 (ppm): 401
12:15:55:351 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:15:55:352 -> [Configure] Info: Parse configure success
12:15:55:352 -> [Configure] Info: co2CalibrationRequested: True
12:15:55:352 -> [Configure] Info: Detected new firmware version: 3.1.9
12:15:55:353 -> state: 12
12:15:55:353 -> [StateMachine] Info: CO2 Calibration
12:15:55:353 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:15:56:352 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:15:57:352 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:15:58:352 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:15:59:352 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:16:02:360 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:16:02:374 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:16:02:382 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:16:02:396 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:16:02:396 -> [StateMachine] Info: CO2 Calibration: success
12:16:03:396 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:16:03:404 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:16:03:417 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:16:03:418 -> Flags: 20
12:16:03:418 -> Success calibration!
12:16:03:418 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:16:06:082 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:16:06:082 -> [ApiClient] Info: Return code: 200
12:16:06:084 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:16:06:086 -> [Configure] Info: Parse configure success
12:16:06:087 -> [Configure] Info: Detected new firmware version: 3.1.9
12:16:06:088 -> state: 12
12:16:07:016 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:16:07:017 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":401,"boot":27,"bootCount":27}
12:16:07:017 -> [ApiClient] Info: Return code: 200
12:16:07:017 -> 
12:16:07:017 -> Online mode and isPostToAirGradient = true: watchdog reset
12:16:07:017 -> 
12:16:07:039 -> CO2 (ppm): 400
12:16:07:064 -> External watchdog feed!
12:16:11:060 -> CO2 (ppm): 400
12:16:15:080 -> CO2 (ppm): 400
12:16:19:101 -> CO2 (ppm): 400
12:16:27:141 -> CO2 (ppm): 400
12:16:27:141 -> CO2 (ppm): 400
12:16:31:162 -> CO2 (ppm): 400
12:16:35:183 -> CO2 (ppm): 400
12:16:39:202 -> CO2 (ppm): 400
12:16:43:222 -> CO2 (ppm): 400
12:16:47:243 -> CO2 (ppm): 400
12:16:51:263 -> CO2 (ppm): 400
12:16:55:284 -> CO2 (ppm): 400
12:16:59:343 -> CO2 (ppm): 399
12:17:03:364 -> CO2 (ppm): 399
12:17:05:437 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:17:05:439 -> [Configure] Info: Parse configure success
12:17:05:439 -> [Configure] Info: co2CalibrationRequested: True
12:17:05:439 -> [Configure] Info: Detected new firmware version: 3.1.9
12:17:05:439 -> state: 12
12:17:05:439 -> [StateMachine] Info: CO2 Calibration
12:17:05:439 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:17:06:439 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:17:07:440 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:17:08:439 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:17:09:439 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:17:12:447 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:17:12:461 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:17:12:469 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:17:12:484 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:17:12:484 -> [StateMachine] Info: CO2 Calibration: success
12:17:13:484 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:17:13:492 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:17:13:505 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:17:13:505 -> Flags: 20
12:17:13:505 -> Success calibration!
12:17:13:505 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:17:16:123 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:17:16:124 -> [ApiClient] Info: Return code: 200
12:17:16:125 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:17:16:126 -> [Configure] Info: Parse configure success
12:17:16:127 -> [Configure] Info: Detected new firmware version: 3.1.9
12:17:16:128 -> state: 12
12:17:17:059 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:17:17:059 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":399,"boot":28,"bootCount":28}
12:17:17:059 -> [ApiClient] Info: Return code: 200
12:17:17:060 -> 
12:17:17:060 -> Online mode and isPostToAirGradient = true: watchdog reset
12:17:17:060 -> 
12:17:17:082 -> CO2 (ppm): 401
12:17:17:106 -> External watchdog feed!
12:17:21:103 -> CO2 (ppm): 400
12:17:25:123 -> CO2 (ppm): 400
12:17:29:144 -> CO2 (ppm): 400
12:17:33:164 -> CO2 (ppm): 400
12:17:37:184 -> CO2 (ppm): 400
12:17:41:205 -> CO2 (ppm): 400
12:17:45:228 -> CO2 (ppm): 400
12:17:49:245 -> CO2 (ppm): 400
12:17:53:265 -> CO2 (ppm): 400
12:17:57:285 -> CO2 (ppm): 400
12:18:01:306 -> CO2 (ppm): 400
12:18:05:326 -> CO2 (ppm): 400
12:18:09:347 -> CO2 (ppm): 400
12:18:13:368 -> CO2 (ppm): 400
12:18:15:524 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:18:15:526 -> [Configure] Info: Parse configure success
12:18:15:526 -> [Configure] Info: co2CalibrationRequested: True
12:18:15:526 -> [Configure] Info: Detected new firmware version: 3.1.9
12:18:15:526 -> state: 12
12:18:15:527 -> [StateMachine] Info: CO2 Calibration
12:18:15:527 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:18:16:530 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:18:17:526 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:18:18:526 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:18:19:526 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:18:22:535 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:18:22:548 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:18:22:556 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:18:22:570 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:18:22:570 -> [StateMachine] Info: CO2 Calibration: success
12:18:23:570 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:18:23:578 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:18:23:591 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:18:23:592 -> Flags: 20
12:18:23:592 -> Success calibration!
12:18:23:592 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:18:26:163 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:18:26:163 -> [ApiClient] Info: Return code: 200
12:18:26:165 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:18:26:166 -> [Configure] Info: Parse configure success
12:18:26:167 -> [Configure] Info: Detected new firmware version: 3.1.9
12:18:26:168 -> state: 12
12:18:27:109 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:18:27:109 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":400,"boot":29,"bootCount":29}
12:18:27:109 -> [ApiClient] Info: Return code: 200
12:18:27:110 -> 
12:18:27:110 -> Online mode and isPostToAirGradient = true: watchdog reset
12:18:27:110 -> 
12:18:27:131 -> CO2 (ppm): 401
12:18:27:156 -> External watchdog feed!
12:18:31:163 -> CO2 (ppm): 401
12:18:35:171 -> CO2 (ppm): 401
12:18:39:192 -> CO2 (ppm): 401
12:18:43:213 -> CO2 (ppm): 401
12:18:51:254 -> CO2 (ppm): 401
12:18:51:254 -> CO2 (ppm): 401
12:18:55:274 -> CO2 (ppm): 401
12:18:59:295 -> CO2 (ppm): 401
12:19:03:316 -> CO2 (ppm): 400
12:19:07:337 -> CO2 (ppm): 400
12:19:11:358 -> CO2 (ppm): 400
12:19:15:378 -> CO2 (ppm): 400
12:19:19:398 -> CO2 (ppm): 400
12:19:23:418 -> CO2 (ppm): 400
12:19:25:611 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:19:25:612 -> [Configure] Info: Parse configure success
12:19:25:612 -> [Configure] Info: co2CalibrationRequested: True
12:19:25:612 -> [Configure] Info: Detected new firmware version: 3.1.9
12:19:25:612 -> state: 12
12:19:25:612 -> [StateMachine] Info: CO2 Calibration
12:19:25:612 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:19:26:612 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:19:27:612 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:19:28:612 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:19:29:612 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:19:32:620 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:19:32:633 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:19:32:642 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:19:32:656 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:19:32:656 -> [StateMachine] Info: CO2 Calibration: success
12:19:33:656 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:19:33:664 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:19:33:676 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:19:33:677 -> Flags: 20
12:19:33:677 -> Success calibration!
12:19:33:677 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:19:36:307 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:19:36:307 -> [ApiClient] Info: Return code: 200
12:19:36:308 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:19:36:311 -> [Configure] Info: Parse configure success
12:19:36:311 -> [Configure] Info: Detected new firmware version: 3.1.9
12:19:36:312 -> state: 12
12:19:37:262 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:19:37:263 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":400,"boot":30,"bootCount":30}
12:19:37:263 -> [ApiClient] Info: Return code: 200
12:19:37:264 -> 
12:19:37:264 -> Online mode and isPostToAirGradient = true: watchdog reset
12:19:37:264 -> 
12:19:37:286 -> CO2 (ppm): 400
12:19:37:310 -> External watchdog feed!
12:19:41:307 -> CO2 (ppm): 400
12:19:45:327 -> CO2 (ppm): 400
12:19:49:346 -> CO2 (ppm): 400
12:19:53:367 -> CO2 (ppm): 400
12:19:57:387 -> CO2 (ppm): 399
12:20:01:408 -> CO2 (ppm): 399
12:20:05:428 -> CO2 (ppm): 399
12:20:09:449 -> CO2 (ppm): 399
12:20:13:469 -> CO2 (ppm): 399
12:20:17:490 -> CO2 (ppm): 399
12:20:21:510 -> CO2 (ppm): 399
12:20:25:531 -> CO2 (ppm): 399
12:20:29:552 -> CO2 (ppm): 399
12:20:33:573 -> CO2 (ppm): 399
12:20:35:696 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:20:35:697 -> [Configure] Info: Parse configure success
12:20:35:697 -> [Configure] Info: co2CalibrationRequested: True
12:20:35:698 -> [Configure] Info: Detected new firmware version: 3.1.9
12:20:35:698 -> state: 12
12:20:35:698 -> [StateMachine] Info: CO2 Calibration
12:20:35:698 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:20:36:698 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:20:37:698 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:20:38:698 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:20:39:698 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:20:42:706 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:20:42:720 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:20:42:728 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:20:42:742 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:20:42:742 -> [StateMachine] Info: CO2 Calibration: success
12:20:43:742 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:20:43:750 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:20:43:763 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:20:43:763 -> Flags: 20
12:20:43:763 -> Success calibration!
12:20:43:763 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:20:46:349 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:20:46:349 -> [ApiClient] Info: Return code: 200
12:20:46:351 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:20:46:352 -> [Configure] Info: Parse configure success
12:20:46:353 -> [Configure] Info: Detected new firmware version: 3.1.9
12:20:46:354 -> state: 12
12:20:47:304 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:20:47:305 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":399,"boot":31,"bootCount":31}
12:20:47:305 -> [ApiClient] Info: Return code: 200
12:20:47:305 -> 
12:20:47:305 -> Online mode and isPostToAirGradient = true: watchdog reset
12:20:47:305 -> 
12:20:47:326 -> CO2 (ppm): 401
12:20:47:351 -> External watchdog feed!
12:20:51:347 -> CO2 (ppm): 401
12:20:55:366 -> CO2 (ppm): 401
12:20:59:387 -> CO2 (ppm): 401
12:21:03:407 -> CO2 (ppm): 401
12:21:07:427 -> CO2 (ppm): 401
12:21:11:447 -> CO2 (ppm): 401
12:21:15:468 -> CO2 (ppm): 401
12:21:19:489 -> CO2 (ppm): 401
12:21:27:531 -> CO2 (ppm): 401
12:21:27:531 -> CO2 (ppm): 401
12:21:31:558 -> CO2 (ppm): 401
12:21:35:572 -> CO2 (ppm): 401
12:21:39:592 -> CO2 (ppm): 401
12:21:43:613 -> CO2 (ppm): 401
12:21:45:783 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:21:45:784 -> [Configure] Info: Parse configure success
12:21:45:784 -> [Configure] Info: co2CalibrationRequested: True
12:21:45:785 -> [Configure] Info: Detected new firmware version: 3.1.9
12:21:45:786 -> state: 12
12:21:45:786 -> [StateMachine] Info: CO2 Calibration
12:21:45:786 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:21:46:785 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:21:47:785 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:21:48:785 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:21:49:787 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:21:52:793 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:21:52:807 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:21:52:815 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:21:52:829 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:21:52:830 -> [StateMachine] Info: CO2 Calibration: success
12:21:53:829 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:21:53:838 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:21:53:850 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:21:53:851 -> Flags: 20
12:21:53:851 -> Success calibration!
12:21:53:851 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:21:56:493 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:21:56:493 -> [ApiClient] Info: Return code: 200
12:21:56:495 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:21:56:496 -> [Configure] Info: Parse configure success
12:21:56:496 -> [Configure] Info: Detected new firmware version: 3.1.9
12:21:56:498 -> state: 12
12:21:57:417 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:21:57:417 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":401,"boot":32,"bootCount":32}
12:21:57:418 -> [ApiClient] Info: Return code: 200
12:21:57:419 -> 
12:21:57:419 -> Online mode and isPostToAirGradient = true: watchdog reset
12:21:57:419 -> 
12:21:57:441 -> CO2 (ppm): 400
12:21:57:465 -> External watchdog feed!
12:22:01:460 -> CO2 (ppm): 400
12:22:05:482 -> CO2 (ppm): 400
12:22:09:503 -> CO2 (ppm): 401
12:22:13:523 -> CO2 (ppm): 400
12:22:17:542 -> CO2 (ppm): 400
12:22:21:563 -> CO2 (ppm): 401
12:22:25:583 -> CO2 (ppm): 400
12:22:29:603 -> CO2 (ppm): 400
12:22:33:623 -> CO2 (ppm): 400
12:22:37:643 -> CO2 (ppm): 400
12:22:41:664 -> CO2 (ppm): 400
12:22:45:684 -> CO2 (ppm): 400
12:22:49:705 -> CO2 (ppm): 400
12:22:53:726 -> CO2 (ppm): 400
12:22:55:871 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:22:55:872 -> [Configure] Info: Parse configure success
12:22:55:872 -> [Configure] Info: co2CalibrationRequested: True
12:22:55:873 -> [Configure] Info: Detected new firmware version: 3.1.9
12:22:55:873 -> state: 12
12:22:55:873 -> [StateMachine] Info: CO2 Calibration
12:22:55:874 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:22:56:873 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:22:57:873 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:22:58:873 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:22:59:873 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:23:02:881 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:23:02:894 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:23:02:903 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:23:02:917 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:23:02:918 -> [StateMachine] Info: CO2 Calibration: success
12:23:03:918 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:23:03:926 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:23:03:940 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:23:03:940 -> Flags: 20
12:23:03:940 -> Success calibration!
12:23:03:940 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:23:06:531 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:23:06:531 -> [ApiClient] Info: Return code: 200
12:23:06:533 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:23:06:534 -> [Configure] Info: Parse configure success
12:23:06:535 -> [Configure] Info: Detected new firmware version: 3.1.9
12:23:06:536 -> state: 12
12:23:07:490 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:23:07:490 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":400,"boot":33,"bootCount":33}
12:23:07:490 -> [ApiClient] Info: Return code: 200
12:23:07:491 -> 
12:23:07:491 -> Online mode and isPostToAirGradient = true: watchdog reset
12:23:07:491 -> 
12:23:07:514 -> CO2 (ppm): 400
12:23:07:538 -> External watchdog feed!
12:23:11:532 -> CO2 (ppm): 400
12:23:15:553 -> CO2 (ppm): 400
12:23:19:573 -> CO2 (ppm): 400
12:23:23:594 -> CO2 (ppm): 400
12:23:27:615 -> CO2 (ppm): 400
12:23:31:635 -> CO2 (ppm): 400
12:23:35:655 -> CO2 (ppm): 400
12:23:39:676 -> CO2 (ppm): 400
12:23:43:696 -> CO2 (ppm): 400
12:23:47:716 -> CO2 (ppm): 400
12:23:51:737 -> CO2 (ppm): 400
12:23:55:758 -> CO2 (ppm): 400
12:23:59:778 -> CO2 (ppm): 400
12:24:03:798 -> CO2 (ppm): 400
12:24:05:960 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:24:05:960 -> [Configure] Info: Parse configure success
12:24:05:960 -> [Configure] Info: co2CalibrationRequested: True
12:24:05:961 -> [Configure] Info: Detected new firmware version: 3.1.9
12:24:05:962 -> state: 12
12:24:05:962 -> [StateMachine] Info: CO2 Calibration
12:24:05:962 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:24:06:961 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:24:07:961 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:24:08:961 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:24:09:961 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:24:12:969 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:24:12:982 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:24:12:991 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:24:13:005 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:24:13:006 -> [StateMachine] Info: CO2 Calibration: success
12:24:14:006 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:24:14:014 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:24:14:028 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:24:14:029 -> Flags: 20
12:24:14:029 -> Success calibration!
12:24:14:029 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:24:16:678 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:24:16:678 -> [ApiClient] Info: Return code: 200
12:24:16:679 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:24:16:682 -> [Configure] Info: Parse configure success
12:24:16:682 -> [Configure] Info: Detected new firmware version: 3.1.9
12:24:16:683 -> state: 12
12:24:17:531 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:24:17:533 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":400,"boot":34,"bootCount":34}
12:24:17:533 -> [ApiClient] Info: Return code: 200
12:24:17:533 -> 
12:24:17:534 -> Online mode and isPostToAirGradient = true: watchdog reset
12:24:17:534 -> 
12:24:17:555 -> CO2 (ppm): 401
12:24:17:579 -> External watchdog feed!
12:24:21:575 -> CO2 (ppm): 401
12:24:25:595 -> CO2 (ppm): 400
12:24:29:615 -> CO2 (ppm): 400
12:24:33:636 -> CO2 (ppm): 400
12:24:41:676 -> CO2 (ppm): 400
12:24:41:676 -> CO2 (ppm): 400
12:24:45:696 -> CO2 (ppm): 400
12:24:49:717 -> CO2 (ppm): 400
12:24:53:738 -> CO2 (ppm): 400
12:24:57:758 -> CO2 (ppm): 400
12:25:01:779 -> CO2 (ppm): 400
12:25:05:799 -> CO2 (ppm): 400
12:25:09:820 -> CO2 (ppm): 400
12:25:13:840 -> CO2 (ppm): 400
12:25:16:046 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:25:16:047 -> [Configure] Info: Parse configure success
12:25:16:048 -> [Configure] Info: co2CalibrationRequested: True
12:25:16:048 -> [Configure] Info: Detected new firmware version: 3.1.9
12:25:16:048 -> state: 12
12:25:16:048 -> [StateMachine] Info: CO2 Calibration
12:25:16:048 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:25:17:047 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:25:18:048 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:25:19:047 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:25:23:056 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:25:23:056 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:25:23:069 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:25:23:078 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:25:23:092 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:25:23:093 -> [StateMachine] Info: CO2 Calibration: success
12:25:24:092 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:25:24:101 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:25:24:113 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:25:24:115 -> Flags: 20
12:25:24:115 -> Success calibration!
12:25:24:115 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:25:26:714 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:25:26:714 -> [ApiClient] Info: Return code: 200
12:25:26:715 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:25:26:717 -> [Configure] Info: Parse configure success
12:25:26:717 -> [Configure] Info: Detected new firmware version: 3.1.9
12:25:26:719 -> state: 12
12:25:27:663 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:25:27:663 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":400,"boot":35,"bootCount":35}
12:25:27:665 -> [ApiClient] Info: Return code: 200
12:25:27:665 -> 
12:25:27:665 -> Online mode and isPostToAirGradient = true: watchdog reset
12:25:27:665 -> 
12:25:27:686 -> CO2 (ppm): 401
12:25:27:711 -> External watchdog feed!
12:25:31:707 -> CO2 (ppm): 401
12:25:35:728 -> CO2 (ppm): 401
12:25:39:748 -> CO2 (ppm): 401
12:25:43:769 -> CO2 (ppm): 401
12:25:47:789 -> CO2 (ppm): 401
12:25:51:809 -> CO2 (ppm): 401
12:25:55:829 -> CO2 (ppm): 401
12:25:59:850 -> CO2 (ppm): 401
12:26:03:871 -> CO2 (ppm): 401
12:26:07:892 -> CO2 (ppm): 401
12:26:11:913 -> CO2 (ppm): 401
12:26:15:934 -> CO2 (ppm): 401
12:26:19:967 -> CO2 (ppm): 401
12:26:23:974 -> CO2 (ppm): 401
12:26:26:134 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:26:26:136 -> [Configure] Info: Parse configure success
12:26:26:136 -> [Configure] Info: co2CalibrationRequested: True
12:26:26:137 -> [Configure] Info: Detected new firmware version: 3.1.9
12:26:26:137 -> state: 12
12:26:26:137 -> [StateMachine] Info: CO2 Calibration
12:26:26:137 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:26:27:137 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:26:28:137 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:26:29:136 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:26:30:137 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:26:33:145 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:26:33:159 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:26:33:168 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:26:33:181 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:26:33:182 -> [StateMachine] Info: CO2 Calibration: success
12:26:34:181 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:26:34:190 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:26:34:202 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:26:34:203 -> Flags: 20
12:26:34:203 -> Success calibration!
12:26:34:203 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:26:36:763 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:26:36:764 -> [ApiClient] Info: Return code: 200
12:26:36:765 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:26:36:766 -> [Configure] Info: Parse configure success
12:26:36:767 -> [Configure] Info: Detected new firmware version: 3.1.9
12:26:36:769 -> state: 12
12:26:37:685 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:26:37:685 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":401,"boot":36,"bootCount":36}
12:26:37:685 -> [ApiClient] Info: Return code: 200
12:26:37:687 -> 
12:26:37:687 -> Online mode and isPostToAirGradient = true: watchdog reset
12:26:37:687 -> 
12:26:37:717 -> CO2 (ppm): 400
12:26:37:733 -> External watchdog feed!
12:26:41:733 -> CO2 (ppm): 400
12:26:45:753 -> CO2 (ppm): 399
12:26:49:774 -> CO2 (ppm): 399
12:26:57:816 -> CO2 (ppm): 399
12:26:57:816 -> CO2 (ppm): 399
12:27:01:837 -> CO2 (ppm): 399
12:27:05:857 -> CO2 (ppm): 399
12:27:09:877 -> CO2 (ppm): 399
12:27:13:898 -> CO2 (ppm): 399
12:27:17:919 -> CO2 (ppm): 399
12:27:21:940 -> CO2 (ppm): 399
12:27:25:961 -> CO2 (ppm): 398
12:27:29:982 -> CO2 (ppm): 398
12:27:34:002 -> CO2 (ppm): 398
12:27:36:222 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:27:36:224 -> [Configure] Info: Parse configure success
12:27:36:224 -> [Configure] Info: co2CalibrationRequested: True
12:27:36:224 -> [Configure] Info: Detected new firmware version: 3.1.9
12:27:36:224 -> state: 12
12:27:36:224 -> [StateMachine] Info: CO2 Calibration
12:27:36:224 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:27:37:223 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:27:38:223 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:27:39:223 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:27:40:223 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:27:43:232 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:27:43:252 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:27:43:254 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:27:43:267 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:27:43:268 -> [StateMachine] Info: CO2 Calibration: success
12:27:44:267 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:27:44:276 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:27:44:302 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:27:44:303 -> Flags: 20
12:27:44:303 -> Success calibration!
12:27:44:303 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:27:46:904 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:27:46:904 -> [ApiClient] Info: Return code: 200
12:27:46:905 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:27:46:908 -> [Configure] Info: Parse configure success
12:27:46:908 -> [Configure] Info: Detected new firmware version: 3.1.9
12:27:46:911 -> state: 12
12:27:47:849 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:27:47:849 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":398,"boot":37,"bootCount":37}
12:27:47:849 -> [ApiClient] Info: Return code: 200
12:27:47:851 -> 
12:27:47:851 -> Online mode and isPostToAirGradient = true: watchdog reset
12:27:47:851 -> 
12:27:47:871 -> CO2 (ppm): 401
12:27:47:896 -> External watchdog feed!
12:27:51:892 -> CO2 (ppm): 401
12:27:55:913 -> CO2 (ppm): 401
12:27:59:948 -> CO2 (ppm): 401
12:28:03:955 -> CO2 (ppm): 401
12:28:07:976 -> CO2 (ppm): 401
12:28:11:997 -> CO2 (ppm): 401
12:28:16:017 -> CO2 (ppm): 401
12:28:20:037 -> CO2 (ppm): 400
12:28:24:058 -> CO2 (ppm): 400
12:28:28:087 -> CO2 (ppm): 400
12:28:32:099 -> CO2 (ppm): 400
12:28:36:120 -> CO2 (ppm): 400
12:28:40:141 -> CO2 (ppm): 400
12:28:44:161 -> CO2 (ppm): 400
12:28:46:308 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:28:46:309 -> [Configure] Info: Parse configure success
12:28:46:309 -> [Configure] Info: co2CalibrationRequested: True
12:28:46:310 -> [Configure] Info: Detected new firmware version: 3.1.9
12:28:46:310 -> state: 12
12:28:46:310 -> [StateMachine] Info: CO2 Calibration
12:28:46:310 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:28:47:309 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:28:48:313 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:28:49:309 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:28:50:309 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:28:53:317 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:28:53:332 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:28:53:341 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:28:53:356 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:28:53:357 -> [StateMachine] Info: CO2 Calibration: success
12:28:54:364 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:28:54:365 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:28:54:377 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:28:54:378 -> Flags: 20
12:28:54:378 -> Success calibration!
12:28:54:378 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:28:57:049 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:28:57:049 -> [ApiClient] Info: Return code: 200
12:28:57:050 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:28:57:052 -> [Configure] Info: Parse configure success
12:28:57:052 -> [Configure] Info: Detected new firmware version: 3.1.9
12:28:57:054 -> state: 12
12:28:57:974 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:28:57:974 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":400,"boot":38,"bootCount":38}
12:28:57:974 -> [ApiClient] Info: Return code: 200
12:28:57:975 -> 
12:28:57:976 -> Online mode and isPostToAirGradient = true: watchdog reset
12:28:57:976 -> 
12:28:57:997 -> CO2 (ppm): 402
12:28:58:021 -> External watchdog feed!
12:29:02:016 -> CO2 (ppm): 402
12:29:06:036 -> CO2 (ppm): 402
12:29:10:057 -> CO2 (ppm): 402
12:29:14:078 -> CO2 (ppm): 401
12:29:18:098 -> CO2 (ppm): 401
12:29:22:122 -> CO2 (ppm): 401
12:29:26:140 -> CO2 (ppm): 401
12:29:30:160 -> CO2 (ppm): 401
12:29:34:180 -> CO2 (ppm): 400
12:29:38:200 -> CO2 (ppm): 400
12:29:42:220 -> CO2 (ppm): 400
12:29:46:240 -> CO2 (ppm): 400
12:29:50:261 -> CO2 (ppm): 400
12:29:54:281 -> CO2 (ppm): 400
12:29:56:397 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:29:56:397 -> [Configure] Info: Parse configure success
12:29:56:398 -> [Configure] Info: co2CalibrationRequested: True
12:29:56:398 -> [Configure] Info: Detected new firmware version: 3.1.9
12:29:56:399 -> state: 12
12:29:56:399 -> [StateMachine] Info: CO2 Calibration
12:29:56:399 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:29:57:398 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:29:58:398 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:29:59:398 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:30:00:398 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:30:03:406 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:30:03:420 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:30:03:428 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:30:03:442 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:30:03:442 -> [StateMachine] Info: CO2 Calibration: success
12:30:04:442 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:30:04:450 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:30:04:463 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:30:04:464 -> Flags: 20
12:30:04:464 -> Success calibration!
12:30:04:464 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:30:07:088 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:30:07:089 -> [ApiClient] Info: Return code: 200
12:30:07:090 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:30:07:091 -> [Configure] Info: Parse configure success
12:30:07:092 -> [Configure] Info: Detected new firmware version: 3.1.9
12:30:07:093 -> state: 12
12:30:08:034 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:30:08:034 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":400,"boot":39,"bootCount":39}
12:30:08:034 -> [ApiClient] Info: Return code: 200
12:30:08:035 -> 
12:30:08:035 -> Online mode and isPostToAirGradient = true: watchdog reset
12:30:08:035 -> 
12:30:08:056 -> CO2 (ppm): 401
12:30:08:081 -> External watchdog feed!
12:30:12:077 -> CO2 (ppm): 401
12:30:16:097 -> CO2 (ppm): 401
12:30:20:117 -> CO2 (ppm): 401
12:30:24:146 -> CO2 (ppm): 401
12:30:28:157 -> CO2 (ppm): 401
12:30:32:177 -> CO2 (ppm): 401
12:30:36:198 -> CO2 (ppm): 401
12:30:40:219 -> CO2 (ppm): 401
12:30:44:240 -> CO2 (ppm): 401
12:30:48:261 -> CO2 (ppm): 401
12:30:52:282 -> CO2 (ppm): 401
12:30:56:302 -> CO2 (ppm): 401
12:31:00:323 -> CO2 (ppm): 401
12:31:04:343 -> CO2 (ppm): 401
12:31:06:484 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:31:06:486 -> [Configure] Info: Parse configure success
12:31:06:486 -> [Configure] Info: co2CalibrationRequested: True
12:31:06:487 -> [Configure] Info: Detected new firmware version: 3.1.9
12:31:06:487 -> state: 12
12:31:06:487 -> [StateMachine] Info: CO2 Calibration
12:31:06:487 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:31:07:486 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:31:08:486 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:31:09:489 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:31:10:495 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:31:13:494 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:31:13:508 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:31:13:516 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:31:13:530 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:31:13:531 -> [StateMachine] Info: CO2 Calibration: success
12:31:14:530 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:31:14:538 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:31:14:551 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:31:14:552 -> Flags: 20
12:31:14:552 -> Success calibration!
12:31:14:552 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:31:17:135 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:31:17:136 -> [ApiClient] Info: Return code: 200
12:31:17:137 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:31:17:138 -> [Configure] Info: Parse configure success
12:31:17:139 -> [Configure] Info: Detected new firmware version: 3.1.9
12:31:17:140 -> state: 12
12:31:18:066 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:31:18:066 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":401,"boot":40,"bootCount":40}
12:31:18:066 -> [ApiClient] Info: Return code: 200
12:31:18:067 -> 
12:31:18:067 -> Online mode and isPostToAirGradient = true: watchdog reset
12:31:18:067 -> 
12:31:18:088 -> CO2 (ppm): 400
12:31:18:112 -> External watchdog feed!
12:31:22:108 -> CO2 (ppm): 400
12:31:26:130 -> CO2 (ppm): 400
12:31:30:150 -> CO2 (ppm): 400
12:31:34:171 -> CO2 (ppm): 400
12:31:38:191 -> CO2 (ppm): 400
12:31:42:213 -> CO2 (ppm): 400
12:31:50:253 -> CO2 (ppm): 400
12:31:50:253 -> CO2 (ppm): 400
12:31:54:274 -> CO2 (ppm): 400
12:31:58:293 -> CO2 (ppm): 400
12:32:02:314 -> CO2 (ppm): 400
12:32:06:335 -> CO2 (ppm): 400
12:32:10:356 -> CO2 (ppm): 400
12:32:14:376 -> CO2 (ppm): 400
12:32:16:571 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:32:16:572 -> [Configure] Info: Parse configure success
12:32:16:572 -> [Configure] Info: co2CalibrationRequested: True
12:32:16:573 -> [Configure] Info: Detected new firmware version: 3.1.9
12:32:16:573 -> state: 12
12:32:16:573 -> [StateMachine] Info: CO2 Calibration
12:32:16:573 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:32:17:573 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:32:18:573 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:32:20:573 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:32:20:573 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:32:23:581 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:32:23:595 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:32:23:604 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:32:23:618 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:32:23:618 -> [StateMachine] Info: CO2 Calibration: success
12:32:24:618 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:32:24:627 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:32:24:687 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:32:24:688 -> Flags: 20
12:32:24:688 -> Success calibration!
12:32:24:688 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:32:27:376 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:32:27:376 -> [ApiClient] Info: Return code: 200
12:32:27:377 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:32:27:379 -> [Configure] Info: Parse configure success
12:32:27:379 -> [Configure] Info: Detected new firmware version: 3.1.9
12:32:27:381 -> state: 12
12:32:28:321 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:32:28:321 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":400,"boot":41,"bootCount":41}
12:32:28:321 -> [ApiClient] Info: Return code: 200
12:32:28:322 -> 
12:32:28:323 -> Online mode and isPostToAirGradient = true: watchdog reset
12:32:28:323 -> 
12:32:28:343 -> CO2 (ppm): 401
12:32:28:368 -> External watchdog feed!
12:32:32:363 -> CO2 (ppm): 400
12:32:36:384 -> CO2 (ppm): 401
12:32:40:405 -> CO2 (ppm): 401
12:32:44:426 -> CO2 (ppm): 401
12:32:48:446 -> CO2 (ppm): 401
12:32:52:467 -> CO2 (ppm): 401
12:32:56:487 -> CO2 (ppm): 401
12:33:00:508 -> CO2 (ppm): 400
12:33:04:572 -> CO2 (ppm): 401
12:33:08:591 -> CO2 (ppm): 400
12:33:12:612 -> CO2 (ppm): 400
12:33:20:654 -> CO2 (ppm): 400
12:33:20:654 -> CO2 (ppm): 400
12:33:24:673 -> CO2 (ppm): 400
12:33:26:707 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:33:26:708 -> [Configure] Info: Parse configure success
12:33:26:708 -> [Configure] Info: co2CalibrationRequested: True
12:33:26:709 -> [Configure] Info: Detected new firmware version: 3.1.9
12:33:26:709 -> state: 12
12:33:26:709 -> [StateMachine] Info: CO2 Calibration
12:33:26:709 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:33:27:708 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:33:28:708 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:33:29:708 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:33:30:708 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:33:33:716 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:33:33:730 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:33:33:739 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:33:33:753 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:33:33:753 -> [StateMachine] Info: CO2 Calibration: success
12:33:34:753 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:33:34:762 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:33:34:774 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:33:34:775 -> Flags: 20
12:33:34:775 -> Success calibration!
12:33:34:775 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:33:37:418 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:33:37:418 -> [ApiClient] Info: Return code: 200
12:33:37:420 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:33:37:421 -> [Configure] Info: Parse configure success
12:33:37:424 -> [Configure] Info: Detected new firmware version: 3.1.9
12:33:37:424 -> state: 12
12:33:38:643 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:33:38:644 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":400,"boot":42,"bootCount":42}
12:33:38:644 -> [ApiClient] Info: Return code: 200
12:33:38:644 -> 
12:33:38:644 -> Online mode and isPostToAirGradient = true: watchdog reset
12:33:38:644 -> 
12:33:38:665 -> CO2 (ppm): 401
12:33:38:690 -> External watchdog feed!
12:33:42:685 -> CO2 (ppm): 401
12:33:46:720 -> CO2 (ppm): 401
12:33:50:726 -> CO2 (ppm): 401
12:33:54:746 -> CO2 (ppm): 401
12:33:58:767 -> CO2 (ppm): 400
12:34:02:787 -> CO2 (ppm): 400
12:34:06:808 -> CO2 (ppm): 400
12:34:10:828 -> CO2 (ppm): 400
12:34:14:849 -> CO2 (ppm): 400
12:34:18:869 -> CO2 (ppm): 400
12:34:22:889 -> CO2 (ppm): 400
12:34:26:909 -> CO2 (ppm): 400
12:34:30:929 -> CO2 (ppm): 400
12:34:36:795 -> CO2 (ppm): 400
12:34:36:795 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:34:36:796 -> [Configure] Info: Parse configure success
12:34:36:796 -> [Configure] Info: co2CalibrationRequested: True
12:34:36:796 -> [Configure] Info: Detected new firmware version: 3.1.9
12:34:36:797 -> state: 12
12:34:36:797 -> [StateMachine] Info: CO2 Calibration
12:34:36:797 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:34:37:797 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:34:38:797 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:34:39:797 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:34:40:798 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:34:43:805 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:34:43:818 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:34:43:827 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:34:43:841 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:34:43:842 -> [StateMachine] Info: CO2 Calibration: success
12:34:44:842 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:34:44:850 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:34:44:864 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:34:44:865 -> Flags: 20
12:34:44:865 -> Success calibration!
12:34:44:865 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:34:47:461 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:34:47:462 -> [ApiClient] Info: Return code: 200
12:34:47:462 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:34:47:465 -> [Configure] Info: Parse configure success
12:34:47:465 -> [Configure] Info: Detected new firmware version: 3.1.9
12:34:47:466 -> state: 12
12:34:48:386 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:34:48:386 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":400,"boot":43,"bootCount":43}
12:34:48:388 -> [ApiClient] Info: Return code: 200
12:34:48:388 -> 
12:34:48:388 -> Online mode and isPostToAirGradient = true: watchdog reset
12:34:48:388 -> 
12:34:48:409 -> CO2 (ppm): 400
12:34:48:434 -> External watchdog feed!
12:34:52:429 -> CO2 (ppm): 400
12:34:56:450 -> CO2 (ppm): 400
12:35:00:471 -> CO2 (ppm): 400
12:35:04:491 -> CO2 (ppm): 400
12:35:08:512 -> CO2 (ppm): 400
12:35:12:532 -> CO2 (ppm): 400
12:35:20:574 -> CO2 (ppm): 400
12:35:20:574 -> CO2 (ppm): 400
12:35:24:594 -> CO2 (ppm): 400
12:35:28:614 -> CO2 (ppm): 400
12:35:32:635 -> CO2 (ppm): 400
12:35:40:677 -> CO2 (ppm): 400
12:35:40:677 -> CO2 (ppm): 400
12:35:44:697 -> CO2 (ppm): 400
12:35:46:884 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:35:46:885 -> [Configure] Info: Parse configure success
12:35:46:886 -> [Configure] Info: co2CalibrationRequested: True
12:35:46:886 -> [Configure] Info: Detected new firmware version: 3.1.9
12:35:46:886 -> state: 12
12:35:46:886 -> [StateMachine] Info: CO2 Calibration
12:35:46:886 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:35:47:885 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:35:48:885 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:35:49:885 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:35:50:885 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:35:53:909 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:35:53:910 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:35:53:916 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:35:53:930 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:35:53:931 -> [StateMachine] Info: CO2 Calibration: success
12:35:54:930 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:35:54:939 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:35:54:954 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:35:54:954 -> Flags: 20
12:35:54:954 -> Success calibration!
12:35:54:954 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:35:57:604 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:35:57:604 -> [ApiClient] Info: Return code: 200
12:35:57:605 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:35:57:607 -> [Configure] Info: Parse configure success
12:35:57:607 -> [Configure] Info: Detected new firmware version: 3.1.9
12:35:57:609 -> state: 12
12:35:58:560 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:35:58:560 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":400,"boot":44,"bootCount":44}
12:35:58:561 -> [ApiClient] Info: Return code: 200
12:35:58:562 -> 
12:35:58:562 -> Online mode and isPostToAirGradient = true: watchdog reset
12:35:58:562 -> 
12:35:58:583 -> CO2 (ppm): 400
12:35:58:612 -> External watchdog feed!
12:36:02:604 -> CO2 (ppm): 400
12:36:06:624 -> CO2 (ppm): 400
12:36:10:644 -> CO2 (ppm): 400
12:36:14:665 -> CO2 (ppm): 400
12:36:18:685 -> CO2 (ppm): 400
12:36:22:706 -> CO2 (ppm): 400
12:36:26:726 -> CO2 (ppm): 400
12:36:30:746 -> CO2 (ppm): 400
12:36:34:767 -> CO2 (ppm): 400
12:36:38:787 -> CO2 (ppm): 400
12:36:42:807 -> CO2 (ppm): 400
12:36:46:827 -> CO2 (ppm): 400
12:36:50:847 -> CO2 (ppm): 400
12:36:56:971 -> CO2 (ppm): 400
12:36:56:971 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:36:56:972 -> [Configure] Info: Parse configure success
12:36:56:972 -> [Configure] Info: co2CalibrationRequested: True
12:36:56:973 -> [Configure] Info: Detected new firmware version: 3.1.9
12:36:56:973 -> state: 12
12:36:56:973 -> [StateMachine] Info: CO2 Calibration
12:36:56:973 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:36:57:973 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:36:58:973 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:36:59:981 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:37:00:973 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:37:03:981 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:37:03:994 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:37:04:003 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:37:04:018 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:37:04:018 -> [StateMachine] Info: CO2 Calibration: success
12:37:05:018 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:37:05:026 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:37:05:038 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:37:05:039 -> Flags: 20
12:37:05:039 -> Success calibration!
12:37:05:039 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:37:07:645 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:37:07:645 -> [ApiClient] Info: Return code: 200
12:37:07:646 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:37:07:648 -> [Configure] Info: Parse configure success
12:37:07:649 -> [Configure] Info: Detected new firmware version: 3.1.9
12:37:07:650 -> state: 12
12:37:08:669 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:37:08:670 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":400,"boot":45,"bootCount":45}
12:37:08:670 -> [ApiClient] Info: Return code: 200
12:37:08:671 -> 
12:37:08:671 -> Online mode and isPostToAirGradient = true: watchdog reset
12:37:08:671 -> 
12:37:08:692 -> CO2 (ppm): 402
12:37:08:717 -> External watchdog feed!
12:37:12:714 -> CO2 (ppm): 402
12:37:16:734 -> CO2 (ppm): 402
12:37:20:754 -> CO2 (ppm): 402
12:37:24:774 -> CO2 (ppm): 402
12:37:28:795 -> CO2 (ppm): 402
12:37:32:815 -> CO2 (ppm): 401
12:37:36:836 -> CO2 (ppm): 401
12:37:40:856 -> CO2 (ppm): 401
12:37:44:876 -> CO2 (ppm): 401
12:37:48:896 -> CO2 (ppm): 401
12:37:52:917 -> CO2 (ppm): 401
12:37:56:938 -> CO2 (ppm): 401
12:38:00:959 -> CO2 (ppm): 401
12:38:07:058 -> CO2 (ppm): 401
12:38:07:058 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:38:07:060 -> [Configure] Info: Parse configure success
12:38:07:060 -> [Configure] Info: co2CalibrationRequested: True
12:38:07:060 -> [Configure] Info: Detected new firmware version: 3.1.9
12:38:07:061 -> state: 12
12:38:07:061 -> [StateMachine] Info: CO2 Calibration
12:38:07:061 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:38:09:060 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:38:09:060 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:38:10:060 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:38:11:060 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:38:14:068 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:38:14:083 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:38:14:092 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:38:14:105 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:38:14:106 -> [StateMachine] Info: CO2 Calibration: success
12:38:15:105 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:38:15:114 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:38:15:126 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:38:15:127 -> Flags: 20
12:38:15:127 -> Success calibration!
12:38:15:127 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:38:17:788 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:38:17:788 -> [ApiClient] Info: Return code: 200
12:38:17:790 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:38:17:791 -> [Configure] Info: Parse configure success
12:38:17:792 -> [Configure] Info: Detected new firmware version: 3.1.9
12:38:17:794 -> state: 12
12:38:18:713 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:38:18:713 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":401,"boot":46,"bootCount":46}
12:38:18:713 -> [ApiClient] Info: Return code: 200
12:38:18:714 -> 
12:38:18:715 -> Online mode and isPostToAirGradient = true: watchdog reset
12:38:18:715 -> 
12:38:18:754 -> CO2 (ppm): 401
12:38:18:760 -> External watchdog feed!
12:38:22:755 -> CO2 (ppm): 400
12:38:26:776 -> CO2 (ppm): 400
12:38:30:797 -> CO2 (ppm): 400
12:38:34:818 -> CO2 (ppm): 400
12:38:38:838 -> CO2 (ppm): 400
12:38:42:858 -> CO2 (ppm): 400
12:38:46:878 -> CO2 (ppm): 400
12:38:50:900 -> CO2 (ppm): 399
12:38:54:921 -> CO2 (ppm): 399
12:38:58:940 -> CO2 (ppm): 400
12:39:02:962 -> CO2 (ppm): 399
12:39:06:982 -> CO2 (ppm): 399
12:39:11:002 -> CO2 (ppm): 399
12:39:15:032 -> CO2 (ppm): 399
12:39:17:146 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:39:17:148 -> [Configure] Info: Parse configure success
12:39:17:148 -> [Configure] Info: co2CalibrationRequested: True
12:39:17:149 -> [Configure] Info: Detected new firmware version: 3.1.9
12:39:17:149 -> state: 12
12:39:17:149 -> [StateMachine] Info: CO2 Calibration
12:39:17:149 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:39:19:148 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:39:19:148 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:39:20:148 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:39:21:148 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:39:24:156 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:39:24:170 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:39:24:178 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:39:24:192 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:39:24:192 -> [StateMachine] Info: CO2 Calibration: success
12:39:25:192 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:39:25:200 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:39:25:213 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:39:25:214 -> Flags: 20
12:39:25:214 -> Success calibration!
12:39:25:214 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:39:27:831 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:39:27:832 -> [ApiClient] Info: Return code: 200
12:39:27:833 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:39:27:836 -> [Configure] Info: Parse configure success
12:39:27:836 -> [Configure] Info: Detected new firmware version: 3.1.9
12:39:27:837 -> state: 12
12:39:28:756 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:39:28:756 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":399,"boot":47,"bootCount":47}
12:39:28:756 -> [ApiClient] Info: Return code: 200
12:39:28:779 -> 
12:39:28:779 -> Online mode and isPostToAirGradient = true: watchdog reset
12:39:28:779 -> 
12:39:28:779 -> CO2 (ppm): 401
12:39:28:804 -> External watchdog feed!
12:39:32:799 -> CO2 (ppm): 401
12:39:36:820 -> CO2 (ppm): 401
12:39:40:841 -> CO2 (ppm): 401
12:39:44:861 -> CO2 (ppm): 401
12:39:48:882 -> CO2 (ppm): 401
12:39:52:902 -> CO2 (ppm): 401
12:39:56:922 -> CO2 (ppm): 401
12:40:00:943 -> CO2 (ppm): 401
12:40:04:963 -> CO2 (ppm): 401
12:40:08:985 -> CO2 (ppm): 401
12:40:13:004 -> CO2 (ppm): 401
12:40:17:040 -> CO2 (ppm): 401
12:40:21:047 -> CO2 (ppm): 401
12:40:25:066 -> CO2 (ppm): 401
12:40:27:233 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:40:27:234 -> [Configure] Info: Parse configure success
12:40:27:234 -> [Configure] Info: co2CalibrationRequested: True
12:40:27:235 -> [Configure] Info: Detected new firmware version: 3.1.9
12:40:27:235 -> state: 12
12:40:27:235 -> [StateMachine] Info: CO2 Calibration
12:40:27:235 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:40:28:235 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:40:29:234 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:40:30:235 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:40:31:235 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:40:34:243 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:40:34:256 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:40:34:265 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:40:34:278 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:40:34:279 -> [StateMachine] Info: CO2 Calibration: success
12:40:35:279 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:40:35:287 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:40:35:299 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:40:35:300 -> Flags: 20
12:40:35:300 -> Success calibration!
12:40:35:300 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:40:37:870 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:40:37:870 -> [ApiClient] Info: Return code: 200
12:40:37:872 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:40:37:874 -> [Configure] Info: Detected new firmware version: 3.1.9
12:40:37:874 -> [Configure] Info: Parse configure success
12:40:37:879 -> state: 12
12:40:38:926 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:40:38:926 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":401,"boot":48,"bootCount":48}
12:40:38:926 -> [ApiClient] Info: Return code: 200
12:40:38:927 -> 
12:40:38:927 -> Online mode and isPostToAirGradient = true: watchdog reset
12:40:38:927 -> 
12:40:38:948 -> CO2 (ppm): 402
12:40:38:973 -> External watchdog feed!
12:40:42:969 -> CO2 (ppm): 402
12:40:46:989 -> CO2 (ppm): 402
12:40:51:009 -> CO2 (ppm): 402
12:40:55:030 -> CO2 (ppm): 402
12:40:59:051 -> CO2 (ppm): 402
12:41:03:072 -> CO2 (ppm): 402
12:41:07:093 -> CO2 (ppm): 402
12:41:11:113 -> CO2 (ppm): 402
12:41:15:165 -> CO2 (ppm): 402
12:41:19:186 -> CO2 (ppm): 402
12:41:23:204 -> CO2 (ppm): 402
12:41:27:225 -> CO2 (ppm): 402
12:41:31:247 -> CO2 (ppm): 402
12:41:37:330 -> CO2 (ppm): 402
12:41:37:330 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:41:37:331 -> [Configure] Info: Parse configure success
12:41:37:331 -> [Configure] Info: co2CalibrationRequested: True
12:41:37:331 -> [Configure] Info: Detected new firmware version: 3.1.9
12:41:37:331 -> state: 12
12:41:37:331 -> [StateMachine] Info: CO2 Calibration
12:41:37:331 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:41:38:320 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:41:39:320 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:41:40:320 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:41:41:321 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:41:44:328 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:41:44:342 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:41:44:351 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:41:44:365 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:41:44:366 -> [StateMachine] Info: CO2 Calibration: success
12:41:45:365 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:41:45:374 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:41:45:386 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:41:45:387 -> Flags: 20
12:41:45:387 -> Success calibration!
12:41:45:387 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:41:48:015 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:41:48:015 -> [ApiClient] Info: Return code: 200
12:41:48:018 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:41:48:019 -> [Configure] Info: Parse configure success
12:41:48:019 -> [Configure] Info: Detected new firmware version: 3.1.9
12:41:48:021 -> state: 12
12:41:48:950 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:41:48:951 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":402,"boot":49,"bootCount":49}
12:41:48:951 -> [ApiClient] Info: Return code: 200
12:41:48:951 -> 
12:41:48:952 -> Online mode and isPostToAirGradient = true: watchdog reset
12:41:48:952 -> 
12:41:48:972 -> CO2 (ppm): 400
12:41:48:997 -> External watchdog feed!
12:41:52:992 -> CO2 (ppm): 400
12:42:01:033 -> CO2 (ppm): 400
12:42:01:033 -> CO2 (ppm): 400
12:42:05:054 -> CO2 (ppm): 401
12:42:09:077 -> CO2 (ppm): 401
12:42:13:094 -> CO2 (ppm): 401
12:42:17:115 -> CO2 (ppm): 401
12:42:21:136 -> CO2 (ppm): 401
12:42:23:021 -> 
12:42:23:022 -> firmwareCheckForUpdate:
12:42:23:022 -> firmwareCheckForUpdate: Perform
12:42:23:022 -> checking for new OTA update @ http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/generic/os/firmware.bin?current_firmware=3.1.9-1-g4691500-dirty
12:42:23:658 -> Firmware update skipped, the server returned 400
12:42:23:659 -> 3
12:42:23:660 -> OTA message: 
12:42:23:660 -> 
12:42:25:164 -> CO2 (ppm): 401
12:42:29:177 -> CO2 (ppm): 401
12:42:33:198 -> CO2 (ppm): 400
12:42:37:218 -> CO2 (ppm): 400
12:42:41:238 -> CO2 (ppm): 422
12:42:45:258 -> CO2 (ppm): 442
12:42:47:406 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:42:47:408 -> [Configure] Info: Parse configure success
12:42:47:408 -> [Configure] Info: co2CalibrationRequested: True
12:42:47:408 -> [Configure] Info: Detected new firmware version: 3.1.9
12:42:47:408 -> state: 12
12:42:47:408 -> [StateMachine] Info: CO2 Calibration
12:42:47:408 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:42:48:407 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:42:49:407 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:42:50:407 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:42:51:407 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:42:54:415 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:42:54:429 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:42:54:437 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:42:54:452 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:42:54:452 -> [StateMachine] Info: CO2 Calibration: success
12:42:55:452 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:42:55:460 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:42:55:474 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:42:55:475 -> Flags: 0
12:42:56:482 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:42:56:495 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:42:56:495 -> Flags: 0
12:42:57:503 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:42:57:515 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:42:57:516 -> Flags: 0
12:42:58:524 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:42:58:537 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:42:58:538 -> Flags: 0
12:42:59:545 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:42:59:557 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:42:59:558 -> Flags: 0
12:43:00:558 -> Calibration Timeout
12:43:00:559 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:43:03:177 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:43:03:178 -> [ApiClient] Info: Return code: 200
12:43:03:179 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:43:03:180 -> [Configure] Info: Parse configure success
12:43:03:181 -> [Configure] Info: Detected new firmware version: 3.1.9
12:43:03:182 -> state: 12
12:43:04:134 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:43:04:134 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":442,"boot":50,"bootCount":50}
12:43:04:134 -> [ApiClient] Info: Return code: 200
12:43:04:135 -> 
12:43:04:135 -> Online mode and isPostToAirGradient = true: watchdog reset
12:43:04:135 -> 
12:43:04:156 -> CO2 (ppm): 457
12:43:04:180 -> External watchdog feed!
12:43:08:175 -> CO2 (ppm): 458
12:43:12:195 -> CO2 (ppm): 458
12:43:16:215 -> CO2 (ppm): 468
12:43:24:256 -> CO2 (ppm): 511
12:43:24:256 -> CO2 (ppm): 535
12:43:28:277 -> CO2 (ppm): 548
12:43:32:297 -> CO2 (ppm): 559
12:43:36:318 -> CO2 (ppm): 569
12:43:44:359 -> CO2 (ppm): 607
12:43:44:359 -> CO2 (ppm): 651
12:43:48:379 -> CO2 (ppm): 674
12:43:52:400 -> CO2 (ppm): 694
12:43:56:421 -> CO2 (ppm): 728
12:44:00:441 -> CO2 (ppm): 783
12:44:02:578 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:44:02:578 -> [Configure] Info: Parse configure success
12:44:02:579 -> [Configure] Info: co2CalibrationRequested: True
12:44:02:579 -> [Configure] Info: Detected new firmware version: 3.1.9
12:44:02:579 -> state: 12
12:44:02:580 -> [StateMachine] Info: CO2 Calibration
12:44:02:580 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:44:03:580 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:44:04:580 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:44:05:580 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:44:09:588 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:44:09:588 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:44:09:602 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:44:09:610 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:44:09:624 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:44:09:624 -> [StateMachine] Info: CO2 Calibration: success
12:44:10:624 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:44:10:632 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:44:10:666 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:44:10:666 -> Flags: 0
12:44:11:674 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:44:11:687 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:44:11:687 -> Flags: 0
12:44:12:695 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:44:12:708 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:44:12:708 -> Flags: 0
12:44:13:716 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:44:13:729 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:44:13:729 -> Flags: 0
12:44:14:738 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:44:14:750 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:44:14:750 -> Flags: 0
12:44:15:750 -> Calibration Timeout
12:44:15:751 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:44:18:337 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:44:18:338 -> [ApiClient] Info: Return code: 200
12:44:18:339 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:44:18:340 -> [Configure] Info: Parse configure success
12:44:18:341 -> [Configure] Info: Detected new firmware version: 3.1.9
12:44:18:342 -> state: 12
12:44:19:282 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:44:19:282 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":783,"boot":51,"bootCount":51}
12:44:19:282 -> [ApiClient] Info: Return code: 200
12:44:19:283 -> 
12:44:19:283 -> Online mode and isPostToAirGradient = true: watchdog reset
12:44:19:283 -> 
12:44:19:305 -> CO2 (ppm): 921
12:44:19:329 -> External watchdog feed!
12:44:23:326 -> CO2 (ppm): 919
12:44:27:347 -> CO2 (ppm): 933
12:44:31:367 -> CO2 (ppm): 954
12:44:40:374 -> Get CO2 failed: 1
12:44:44:395 -> CO2 (ppm): 1242
12:44:48:414 -> CO2 (ppm): 1063
12:44:52:434 -> CO2 (ppm): 971
12:44:56:455 -> CO2 (ppm): 845
12:45:00:476 -> CO2 (ppm): 748
12:45:04:496 -> CO2 (ppm): 679
12:45:08:517 -> CO2 (ppm): 653
12:45:12:538 -> CO2 (ppm): 683
12:45:16:559 -> CO2 (ppm): 668
12:45:17:770 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:45:17:770 -> [Configure] Info: Parse configure success
12:45:17:772 -> [Configure] Info: co2CalibrationRequested: True
12:45:17:772 -> [Configure] Info: Detected new firmware version: 3.1.9
12:45:17:773 -> state: 12
12:45:17:773 -> [StateMachine] Info: CO2 Calibration
12:45:17:773 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:45:18:771 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:45:19:771 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:45:20:771 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:45:21:771 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:45:24:780 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:45:24:794 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:45:24:803 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:45:24:816 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:45:24:816 -> [StateMachine] Info: CO2 Calibration: success
12:45:25:816 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:45:25:825 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:45:25:837 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:45:25:838 -> Flags: 0
12:45:26:845 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:45:26:858 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:45:26:858 -> Flags: 0
12:45:27:866 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:45:27:879 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:45:27:879 -> Flags: 0
12:45:28:888 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:45:28:900 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:45:28:901 -> Flags: 0
12:45:29:908 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:45:29:921 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:45:29:921 -> Flags: 0
12:45:30:921 -> Calibration Timeout
12:45:30:922 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:45:33:498 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:45:33:498 -> [ApiClient] Info: Return code: 200
12:45:33:500 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:45:33:501 -> [Configure] Info: Parse configure success
12:45:33:502 -> [Configure] Info: Detected new firmware version: 3.1.9
12:45:33:503 -> state: 12
12:45:34:443 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:45:34:444 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":668,"boot":52,"bootCount":52}
12:45:34:444 -> [ApiClient] Info: Return code: 200
12:45:34:445 -> 
12:45:34:446 -> Online mode and isPostToAirGradient = true: watchdog reset
12:45:34:446 -> 
12:45:34:466 -> CO2 (ppm): 561
12:45:34:491 -> External watchdog feed!
12:45:38:486 -> CO2 (ppm): 539
12:45:42:506 -> CO2 (ppm): 533
12:45:46:525 -> CO2 (ppm): 532
12:45:50:547 -> CO2 (ppm): 524
12:45:54:577 -> CO2 (ppm): 516
12:45:58:587 -> CO2 (ppm): 512
12:46:02:607 -> CO2 (ppm): 508
12:46:06:627 -> CO2 (ppm): 508
12:46:10:651 -> CO2 (ppm): 531
12:46:14:669 -> CO2 (ppm): 535
12:46:18:690 -> CO2 (ppm): 532
12:46:22:711 -> CO2 (ppm): 524
12:46:26:732 -> CO2 (ppm): 512
12:46:30:753 -> CO2 (ppm): 498
12:46:32:940 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:46:32:942 -> [Configure] Info: Parse configure success
12:46:32:943 -> [Configure] Info: co2CalibrationRequested: True
12:46:32:944 -> [Configure] Info: Detected new firmware version: 3.1.9
12:46:32:944 -> state: 12
12:46:32:944 -> [StateMachine] Info: CO2 Calibration
12:46:32:944 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:46:33:943 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:46:34:943 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:46:35:943 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:46:36:943 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:46:39:951 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:46:39:965 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:46:39:973 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:46:39:986 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:46:39:987 -> [StateMachine] Info: CO2 Calibration: success
12:46:40:987 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:46:40:995 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:46:41:007 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:46:41:008 -> Flags: 0
12:46:42:016 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:46:42:028 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:46:42:029 -> Flags: 0
12:46:43:037 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:46:43:050 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:46:43:050 -> Flags: 0
12:46:44:058 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:46:44:070 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:46:44:072 -> Flags: 0
12:46:45:088 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:46:45:092 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:46:45:092 -> Flags: 0
12:46:46:092 -> Calibration Timeout
12:46:46:092 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:46:48:764 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:46:48:764 -> [ApiClient] Info: Return code: 200
12:46:48:766 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:46:48:767 -> [Configure] Info: Parse configure success
12:46:48:767 -> [Configure] Info: Detected new firmware version: 3.1.9
12:46:48:768 -> state: 12
12:46:49:687 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:46:49:688 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":498,"boot":53,"bootCount":53}
12:46:49:688 -> [ApiClient] Info: Return code: 200
12:46:49:689 -> 
12:46:49:689 -> Online mode and isPostToAirGradient = true: watchdog reset
12:46:49:689 -> 
12:46:49:711 -> CO2 (ppm): 452
12:46:49:736 -> External watchdog feed!
12:46:53:732 -> CO2 (ppm): 477
12:46:57:752 -> CO2 (ppm): 504
12:47:01:773 -> CO2 (ppm): 521
12:47:05:792 -> CO2 (ppm): 521
12:47:09:812 -> CO2 (ppm): 516
12:47:13:832 -> CO2 (ppm): 507
12:47:21:872 -> CO2 (ppm): 496
12:47:21:872 -> CO2 (ppm): 484
12:47:25:893 -> CO2 (ppm): 473
12:47:33:973 -> CO2 (ppm): 463
12:47:33:973 -> CO2 (ppm): 452
12:47:37:993 -> CO2 (ppm): 436
12:47:42:014 -> CO2 (ppm): 429
12:47:46:035 -> CO2 (ppm): 423
12:47:48:113 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:47:48:114 -> [Configure] Info: Parse configure success
12:47:48:114 -> [Configure] Info: co2CalibrationRequested: True
12:47:48:114 -> [Configure] Info: Detected new firmware version: 3.1.9
12:47:48:116 -> state: 12
12:47:48:116 -> [StateMachine] Info: CO2 Calibration
12:47:48:116 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:47:49:114 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:47:50:114 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:47:51:114 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:47:52:114 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:47:55:122 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:47:55:136 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:47:55:144 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:47:55:159 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:47:55:159 -> [StateMachine] Info: CO2 Calibration: success
12:47:56:159 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:47:56:167 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:47:56:180 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:47:56:180 -> Flags: 0
12:47:57:188 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:47:57:201 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:47:57:201 -> Flags: 0
12:47:58:209 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:47:58:222 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:47:58:222 -> Flags: 0
12:47:59:230 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:47:59:243 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:47:59:243 -> Flags: 0
12:48:00:251 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:48:00:264 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:48:00:264 -> Flags: 0
12:48:01:263 -> Calibration Timeout
12:48:01:264 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:48:03:919 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:48:03:920 -> [ApiClient] Info: Return code: 200
12:48:03:921 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:48:03:921 -> [Configure] Info: Parse configure success
12:48:03:922 -> [Configure] Info: Detected new firmware version: 3.1.9
12:48:03:923 -> state: 12
12:48:04:871 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:48:04:871 -> [ApiClient] Info: DATA: {"wifi":-51,"rco2":423,"boot":54,"bootCount":54}
12:48:04:872 -> [ApiClient] Info: Return code: 200
12:48:04:873 -> 
12:48:04:873 -> Online mode and isPostToAirGradient = true: watchdog reset
12:48:04:873 -> 
12:48:04:894 -> CO2 (ppm): 410
12:48:04:919 -> External watchdog feed!
12:48:08:923 -> CO2 (ppm): 408
12:48:12:934 -> CO2 (ppm): 406
12:48:16:954 -> CO2 (ppm): 404
12:48:24:994 -> CO2 (ppm): 403
12:48:24:994 -> CO2 (ppm): 402
12:48:29:015 -> CO2 (ppm): 401
12:48:33:035 -> CO2 (ppm): 400
12:48:37:056 -> CO2 (ppm): 399
12:48:41:077 -> CO2 (ppm): 399
12:48:45:098 -> CO2 (ppm): 397
12:48:49:118 -> CO2 (ppm): 397
12:48:53:138 -> CO2 (ppm): 397
12:49:01:180 -> CO2 (ppm): 397
12:49:01:180 -> CO2 (ppm): 397
12:49:03:283 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:49:03:284 -> [Configure] Info: Parse configure success
12:49:03:284 -> [Configure] Info: co2CalibrationRequested: True
12:49:03:285 -> [Configure] Info: Detected new firmware version: 3.1.9
12:49:03:285 -> state: 12
12:49:03:285 -> [StateMachine] Info: CO2 Calibration
12:49:03:285 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:49:04:284 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:49:05:285 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:49:06:285 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:49:07:284 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:49:10:293 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:49:10:306 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:49:10:315 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:49:10:342 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:49:10:343 -> [StateMachine] Info: CO2 Calibration: success
12:49:11:328 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:49:11:337 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:49:11:349 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:49:11:350 -> Flags: 0
12:49:12:358 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:49:12:370 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:49:12:371 -> Flags: 0
12:49:13:379 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:49:13:391 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:49:13:391 -> Flags: 0
12:49:14:400 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:49:14:412 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:49:14:412 -> Flags: 0
12:49:15:421 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:49:15:433 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:49:15:434 -> Flags: 0
12:49:16:433 -> Calibration Timeout
12:49:16:434 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:49:19:084 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:49:19:084 -> [ApiClient] Info: Return code: 200
12:49:19:086 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:49:19:087 -> [Configure] Info: Parse configure success
12:49:19:089 -> [Configure] Info: Detected new firmware version: 3.1.9
12:49:19:089 -> state: 12
12:49:20:020 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:49:20:021 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":397,"boot":55,"bootCount":55}
12:49:20:021 -> [ApiClient] Info: Return code: 200
12:49:20:021 -> 
12:49:20:022 -> Online mode and isPostToAirGradient = true: watchdog reset
12:49:20:022 -> 
12:49:20:042 -> CO2 (ppm): 397
12:49:20:067 -> External watchdog feed!
12:49:24:063 -> CO2 (ppm): 397
12:49:28:084 -> CO2 (ppm): 478
12:49:32:105 -> CO2 (ppm): 565
12:49:36:125 -> CO2 (ppm): 637
12:49:40:145 -> CO2 (ppm): 671
12:49:44:166 -> CO2 (ppm): 683
12:49:48:186 -> CO2 (ppm): 683
12:49:52:207 -> CO2 (ppm): 668
12:49:56:228 -> CO2 (ppm): 643
12:50:00:249 -> CO2 (ppm): 616
12:50:04:270 -> CO2 (ppm): 588
12:50:08:290 -> CO2 (ppm): 560
12:50:12:310 -> CO2 (ppm): 536
12:50:16:331 -> CO2 (ppm): 513
12:50:18:453 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:50:18:454 -> [Configure] Info: Parse configure success
12:50:18:454 -> [Configure] Info: co2CalibrationRequested: True
12:50:18:455 -> [Configure] Info: Detected new firmware version: 3.1.9
12:50:18:455 -> state: 12
12:50:18:455 -> [StateMachine] Info: CO2 Calibration
12:50:18:455 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:50:19:455 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:50:20:455 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:50:21:455 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:50:22:455 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:50:25:463 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:50:25:476 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:50:25:485 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:50:25:498 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:50:25:499 -> [StateMachine] Info: CO2 Calibration: success
12:50:26:499 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:50:26:507 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:50:26:519 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:50:26:520 -> Flags: 0
12:50:27:528 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:50:27:541 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:50:27:542 -> Flags: 0
12:50:28:549 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:50:28:561 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:50:28:562 -> Flags: 0
12:50:29:570 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:50:29:582 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:50:29:583 -> Flags: 0
12:50:30:591 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:50:30:603 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:50:30:604 -> Flags: 0
12:50:31:603 -> Calibration Timeout
12:50:31:604 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:50:34:246 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:50:34:246 -> [ApiClient] Info: Return code: 200
12:50:34:248 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:50:34:250 -> [Configure] Info: Parse configure success
12:50:34:251 -> [Configure] Info: Detected new firmware version: 3.1.9
12:50:34:252 -> state: 12
12:50:35:187 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:50:35:187 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":513,"boot":56,"bootCount":56}
12:50:35:188 -> [ApiClient] Info: Return code: 200
12:50:35:188 -> 
12:50:35:188 -> Online mode and isPostToAirGradient = true: watchdog reset
12:50:35:188 -> 
12:50:35:210 -> CO2 (ppm): 483
12:50:35:235 -> External watchdog feed!
12:50:39:230 -> CO2 (ppm): 472
12:50:43:250 -> CO2 (ppm): 465
12:50:47:271 -> CO2 (ppm): 457
12:50:51:291 -> CO2 (ppm): 448
12:50:55:312 -> CO2 (ppm): 440
12:50:59:333 -> CO2 (ppm): 433
12:51:03:354 -> CO2 (ppm): 428
12:51:07:374 -> CO2 (ppm): 421
12:51:11:395 -> CO2 (ppm): 416
12:51:15:416 -> CO2 (ppm): 413
12:51:19:437 -> CO2 (ppm): 410
12:51:23:457 -> CO2 (ppm): 409
12:51:27:477 -> CO2 (ppm): 407
12:51:31:498 -> CO2 (ppm): 405
12:51:33:624 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:51:33:625 -> [Configure] Info: Parse configure success
12:51:33:625 -> [Configure] Info: co2CalibrationRequested: True
12:51:33:625 -> [Configure] Info: Detected new firmware version: 3.1.9
12:51:33:626 -> state: 12
12:51:33:626 -> [StateMachine] Info: CO2 Calibration
12:51:33:626 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:51:34:625 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:51:35:625 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:51:36:625 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:51:37:625 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:51:40:633 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:51:40:647 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:51:40:655 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:51:40:669 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:51:40:669 -> [StateMachine] Info: CO2 Calibration: success
12:51:41:669 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:51:41:677 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:51:41:690 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:51:41:692 -> Flags: 0
12:51:42:698 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:51:42:711 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:51:42:711 -> Flags: 0
12:51:43:719 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:51:43:732 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:51:43:732 -> Flags: 0
12:51:44:740 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:51:44:753 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:51:44:754 -> Flags: 0
12:51:45:761 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:51:45:773 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:51:45:773 -> Flags: 0
12:51:46:773 -> Calibration Timeout
12:51:46:774 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:51:49:407 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:51:49:407 -> [ApiClient] Info: Return code: 200
12:51:49:409 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:51:49:410 -> [Configure] Info: Parse configure success
12:51:49:410 -> [Configure] Info: Detected new firmware version: 3.1.9
12:51:49:412 -> state: 12
12:51:50:332 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:51:50:332 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":405,"boot":57,"bootCount":57}
12:51:50:332 -> [ApiClient] Info: Return code: 200
12:51:50:334 -> 
12:51:50:334 -> Online mode and isPostToAirGradient = true: watchdog reset
12:51:50:334 -> 
12:51:50:355 -> CO2 (ppm): 398
12:51:50:380 -> External watchdog feed!
12:51:54:375 -> CO2 (ppm): 397
12:51:58:395 -> CO2 (ppm): 397
12:52:02:415 -> CO2 (ppm): 395
12:52:06:435 -> CO2 (ppm): 395
12:52:14:477 -> CO2 (ppm): 394
12:52:14:477 -> CO2 (ppm): 394
12:52:18:498 -> CO2 (ppm): 394
12:52:22:519 -> CO2 (ppm): 394
12:52:26:539 -> CO2 (ppm): 393
12:52:34:579 -> CO2 (ppm): 393
12:52:34:579 -> CO2 (ppm): 393
12:52:38:599 -> CO2 (ppm): 393
12:52:42:619 -> CO2 (ppm): 393
12:52:46:640 -> CO2 (ppm): 393
12:52:48:794 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:52:48:796 -> [Configure] Info: Parse configure success
12:52:48:796 -> [Configure] Info: co2CalibrationRequested: True
12:52:48:796 -> [Configure] Info: Detected new firmware version: 3.1.9
12:52:48:796 -> state: 12
12:52:48:796 -> [StateMachine] Info: CO2 Calibration
12:52:48:796 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:52:49:796 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:52:50:796 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:52:51:796 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:52:52:796 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:52:55:804 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:52:55:817 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:52:55:826 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:52:55:840 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:52:55:841 -> [StateMachine] Info: CO2 Calibration: success
12:52:56:840 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:52:56:849 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:52:56:862 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:52:56:863 -> Flags: 20
12:52:56:863 -> Success calibration!
12:52:56:863 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:52:59:449 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:52:59:449 -> [ApiClient] Info: Return code: 200
12:52:59:450 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:52:59:452 -> [Configure] Info: Parse configure success
12:52:59:453 -> [Configure] Info: Detected new firmware version: 3.1.9
12:52:59:454 -> state: 12
12:53:00:404 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:53:00:404 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":393,"boot":58,"bootCount":58}
12:53:00:404 -> [ApiClient] Info: Return code: 200
12:53:00:406 -> 
12:53:00:406 -> Online mode and isPostToAirGradient = true: watchdog reset
12:53:00:406 -> 
12:53:00:426 -> CO2 (ppm): 400
12:53:00:451 -> External watchdog feed!
12:53:08:468 -> CO2 (ppm): 400
12:53:08:468 -> CO2 (ppm): 401
12:53:12:489 -> CO2 (ppm): 401
12:53:16:509 -> CO2 (ppm): 401
12:53:20:530 -> CO2 (ppm): 401
12:53:24:551 -> CO2 (ppm): 401
12:53:28:571 -> CO2 (ppm): 400
12:53:32:591 -> CO2 (ppm): 401
12:53:36:612 -> CO2 (ppm): 401
12:53:40:633 -> CO2 (ppm): 401
12:53:44:653 -> CO2 (ppm): 401
12:53:48:672 -> CO2 (ppm): 401
12:53:52:693 -> CO2 (ppm): 401
12:53:56:714 -> CO2 (ppm): 401
12:53:58:882 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:53:58:883 -> [Configure] Info: Parse configure success
12:53:58:883 -> [Configure] Info: co2CalibrationRequested: True
12:53:58:884 -> [Configure] Info: Detected new firmware version: 3.1.9
12:53:58:884 -> state: 12
12:53:58:884 -> [StateMachine] Info: CO2 Calibration
12:53:58:884 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:53:59:884 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:54:00:884 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:54:01:883 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:54:02:883 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:54:05:891 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:54:05:905 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:54:05:914 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:54:05:928 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:54:05:929 -> [StateMachine] Info: CO2 Calibration: success
12:54:06:929 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:54:06:937 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:54:06:949 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:54:06:950 -> Flags: 20
12:54:06:950 -> Success calibration!
12:54:06:950 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:54:09:590 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:54:09:590 -> [ApiClient] Info: Return code: 200
12:54:09:591 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:54:09:593 -> [Configure] Info: Parse configure success
12:54:09:593 -> [Configure] Info: Detected new firmware version: 3.1.9
12:54:09:595 -> state: 12
12:54:10:559 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:54:10:559 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":401,"boot":59,"bootCount":59}
12:54:10:559 -> [ApiClient] Info: Return code: 200
12:54:10:560 -> 
12:54:10:560 -> Online mode and isPostToAirGradient = true: watchdog reset
12:54:10:561 -> 
12:54:10:581 -> CO2 (ppm): 401
12:54:10:606 -> External watchdog feed!
12:54:14:601 -> CO2 (ppm): 401
12:54:18:622 -> CO2 (ppm): 401
12:54:22:642 -> CO2 (ppm): 401
12:54:26:663 -> CO2 (ppm): 401
12:54:30:683 -> CO2 (ppm): 401
12:54:34:704 -> CO2 (ppm): 401
12:54:38:724 -> CO2 (ppm): 401
12:54:42:744 -> CO2 (ppm): 401
12:54:46:764 -> CO2 (ppm): 401
12:54:50:785 -> CO2 (ppm): 401
12:54:54:808 -> CO2 (ppm): 401
12:54:58:825 -> CO2 (ppm): 401
12:55:02:846 -> CO2 (ppm): 401
12:55:06:865 -> CO2 (ppm): 401
12:55:08:969 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:55:08:970 -> [Configure] Info: Parse configure success
12:55:08:970 -> [Configure] Info: co2CalibrationRequested: True
12:55:08:973 -> [Configure] Info: Detected new firmware version: 3.1.9
12:55:08:973 -> state: 12
12:55:08:973 -> [StateMachine] Info: CO2 Calibration
12:55:08:973 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:55:09:971 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:55:10:971 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:55:11:970 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:55:12:970 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:55:15:979 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:55:15:992 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:55:16:001 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:55:16:015 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:55:16:016 -> [StateMachine] Info: CO2 Calibration: success
12:55:17:015 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:55:17:024 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:55:17:036 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:55:17:036 -> Flags: 20
12:55:17:036 -> Success calibration!
12:55:17:036 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:55:19:634 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:55:19:636 -> [ApiClient] Info: Return code: 200
12:55:19:636 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:55:19:638 -> [Configure] Info: Parse configure success
12:55:19:638 -> [Configure] Info: Detected new firmware version: 3.1.9
12:55:19:640 -> state: 12
12:55:20:579 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:55:20:579 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":401,"boot":60,"bootCount":60}
12:55:20:581 -> [ApiClient] Info: Return code: 200
12:55:20:581 -> 
12:55:20:581 -> Online mode and isPostToAirGradient = true: watchdog reset
12:55:20:581 -> 
12:55:20:601 -> CO2 (ppm): 400
12:55:20:626 -> External watchdog feed!
12:55:24:621 -> CO2 (ppm): 400
12:55:28:641 -> CO2 (ppm): 400
12:55:32:661 -> CO2 (ppm): 400
12:55:36:681 -> CO2 (ppm): 400
12:55:40:702 -> CO2 (ppm): 400
12:55:44:722 -> CO2 (ppm): 400
12:55:48:742 -> CO2 (ppm): 400
12:55:52:762 -> CO2 (ppm): 400
12:56:00:802 -> CO2 (ppm): 400
12:56:00:802 -> CO2 (ppm): 401
12:56:04:822 -> CO2 (ppm): 432
12:56:08:842 -> CO2 (ppm): 452
12:56:12:863 -> CO2 (ppm): 461
12:56:16:883 -> CO2 (ppm): 462
12:56:19:056 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:56:19:057 -> [Configure] Info: Parse configure success
12:56:19:057 -> [Configure] Info: co2CalibrationRequested: True
12:56:19:058 -> [Configure] Info: Detected new firmware version: 3.1.9
12:56:19:059 -> state: 12
12:56:19:059 -> [StateMachine] Info: CO2 Calibration
12:56:19:059 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:56:21:057 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:56:21:057 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:56:22:057 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:56:23:057 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:56:26:066 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:56:26:079 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:56:26:088 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:56:26:102 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:56:26:102 -> [StateMachine] Info: CO2 Calibration: success
12:56:27:102 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:56:27:111 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:56:27:123 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:56:27:124 -> Flags: 0
12:56:28:132 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:56:28:144 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:56:28:144 -> Flags: 0
12:56:29:152 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:56:29:165 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:56:29:165 -> Flags: 0
12:56:30:173 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:56:30:186 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:56:30:186 -> Flags: 0
12:56:31:194 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:56:31:207 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:56:31:208 -> Flags: 0
12:56:32:207 -> Calibration Timeout
12:56:32:208 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:56:34:794 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:56:34:794 -> [ApiClient] Info: Return code: 200
12:56:34:796 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:56:34:797 -> [Configure] Info: Parse configure success
12:56:34:798 -> [Configure] Info: Detected new firmware version: 3.1.9
12:56:34:799 -> state: 12
12:56:35:730 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:56:35:730 -> [ApiClient] Info: DATA: {"wifi":-56,"rco2":462,"boot":61,"bootCount":61}
12:56:35:730 -> [ApiClient] Info: Return code: 200
12:56:35:731 -> 
12:56:35:731 -> Online mode and isPostToAirGradient = true: watchdog reset
12:56:35:731 -> 
12:56:35:752 -> CO2 (ppm): 445
12:56:35:777 -> External watchdog feed!
12:56:39:772 -> CO2 (ppm): 439
12:56:43:792 -> CO2 (ppm): 434
12:56:47:813 -> CO2 (ppm): 429
12:56:51:835 -> CO2 (ppm): 425
12:56:55:855 -> CO2 (ppm): 420
12:56:59:876 -> CO2 (ppm): 417
12:57:03:897 -> CO2 (ppm): 413
12:57:07:918 -> CO2 (ppm): 411
12:57:11:938 -> CO2 (ppm): 410
12:57:15:957 -> CO2 (ppm): 409
12:57:19:978 -> CO2 (ppm): 407
12:57:28:019 -> CO2 (ppm): 406
12:57:28:019 -> CO2 (ppm): 405
12:57:32:039 -> CO2 (ppm): 404
12:57:34:227 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:57:34:228 -> [Configure] Info: Parse configure success
12:57:34:228 -> [Configure] Info: co2CalibrationRequested: True
12:57:34:229 -> [Configure] Info: Detected new firmware version: 3.1.9
12:57:34:229 -> state: 12
12:57:34:229 -> [StateMachine] Info: CO2 Calibration
12:57:34:229 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:57:35:228 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:57:36:228 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:57:37:228 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:57:38:228 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:57:41:236 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:57:41:250 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:57:41:259 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:57:41:272 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:57:41:272 -> [StateMachine] Info: CO2 Calibration: success
12:57:42:273 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:57:42:281 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:57:42:293 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:57:42:295 -> Flags: 0
12:57:43:302 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:57:43:314 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:57:43:316 -> Flags: 0
12:57:44:323 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:57:44:335 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:57:44:337 -> Flags: 0
12:57:45:344 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:57:45:356 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:57:45:356 -> Flags: 0
12:57:46:365 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:57:46:377 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
12:57:46:378 -> Flags: 0
12:57:47:377 -> Calibration Timeout
12:57:47:379 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
12:57:49:956 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:57:49:956 -> [ApiClient] Info: Return code: 200
12:57:49:958 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:57:49:960 -> [Configure] Info: Parse configure success
12:57:49:960 -> [Configure] Info: Detected new firmware version: 3.1.9
12:57:49:962 -> state: 12
12:57:50:884 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:57:50:884 -> [ApiClient] Info: DATA: {"wifi":-56,"rco2":404,"boot":62,"bootCount":62}
12:57:50:885 -> [ApiClient] Info: Return code: 200
12:57:50:886 -> 
12:57:50:886 -> Online mode and isPostToAirGradient = true: watchdog reset
12:57:50:886 -> 
12:57:50:907 -> CO2 (ppm): 401
12:57:50:932 -> External watchdog feed!
12:57:54:927 -> CO2 (ppm): 401
12:57:58:947 -> CO2 (ppm): 401
12:58:02:967 -> CO2 (ppm): 402
12:58:06:988 -> CO2 (ppm): 401
12:58:11:009 -> CO2 (ppm): 401
12:58:15:030 -> CO2 (ppm): 401
12:58:19:051 -> CO2 (ppm): 401
12:58:23:071 -> CO2 (ppm): 401
12:58:27:092 -> CO2 (ppm): 401
12:58:31:113 -> CO2 (ppm): 401
12:58:35:133 -> CO2 (ppm): 401
12:58:39:153 -> CO2 (ppm): 401
12:58:43:185 -> CO2 (ppm): 401
12:58:47:193 -> CO2 (ppm): 401
12:58:49:397 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:58:49:398 -> [Configure] Info: Parse configure success
12:58:49:398 -> [Configure] Info: co2CalibrationRequested: True
12:58:49:398 -> [Configure] Info: Detected new firmware version: 3.1.9
12:58:49:398 -> state: 12
12:58:49:399 -> [StateMachine] Info: CO2 Calibration
12:58:49:399 -> [StateMachine] Info: Start CO2 calib after 5 sec
12:58:50:398 -> [StateMachine] Info: Start CO2 calib after 4 sec
12:58:51:398 -> [StateMachine] Info: Start CO2 calib after 3 sec
12:58:53:398 -> [StateMachine] Info: Start CO2 calib after 2 sec
12:58:53:398 -> [StateMachine] Info: Start CO2 calib after 1 sec
12:58:56:406 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:58:56:420 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
12:58:56:428 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:58:56:443 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
12:58:56:443 -> [StateMachine] Info: CO2 Calibration: success
12:58:57:443 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
12:58:57:451 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
12:58:57:464 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
12:58:57:465 -> Flags: 20
12:58:57:465 -> Success calibration!
12:58:57:465 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
12:59:00:100 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
12:59:00:100 -> [ApiClient] Info: Return code: 200
12:59:00:103 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:59:00:103 -> [Configure] Info: Parse configure success
12:59:00:104 -> [Configure] Info: Detected new firmware version: 3.1.9
12:59:00:105 -> state: 12
12:59:01:056 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
12:59:01:057 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":401,"boot":63,"bootCount":63}
12:59:01:057 -> [ApiClient] Info: Return code: 200
12:59:01:057 -> 
12:59:01:059 -> Online mode and isPostToAirGradient = true: watchdog reset
12:59:01:059 -> 
12:59:01:078 -> CO2 (ppm): 400
12:59:01:103 -> External watchdog feed!
12:59:05:098 -> CO2 (ppm): 400
12:59:09:119 -> CO2 (ppm): 400
12:59:13:140 -> CO2 (ppm): 400
12:59:17:161 -> CO2 (ppm): 400
12:59:21:181 -> CO2 (ppm): 399
12:59:25:201 -> CO2 (ppm): 401
12:59:29:222 -> CO2 (ppm): 408
12:59:33:242 -> CO2 (ppm): 413
12:59:37:262 -> CO2 (ppm): 414
12:59:41:283 -> CO2 (ppm): 416
12:59:45:303 -> CO2 (ppm): 417
12:59:49:324 -> CO2 (ppm): 416
12:59:53:345 -> CO2 (ppm): 416
12:59:57:366 -> CO2 (ppm): 415
12:59:59:483 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
12:59:59:484 -> [Configure] Info: Parse configure success
12:59:59:484 -> [Configure] Info: co2CalibrationRequested: True
12:59:59:485 -> [Configure] Info: Detected new firmware version: 3.1.9
12:59:59:485 -> state: 12
12:59:59:485 -> [StateMachine] Info: CO2 Calibration
12:59:59:485 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:00:00:485 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:00:01:485 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:00:02:485 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:00:03:485 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:00:06:493 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:00:06:507 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:00:06:515 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:00:06:530 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:00:06:530 -> [StateMachine] Info: CO2 Calibration: success
13:00:07:538 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:00:07:539 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:00:07:550 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:00:07:551 -> Flags: 0
13:00:08:559 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:00:08:571 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:00:08:572 -> Flags: 0
13:00:09:580 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:00:09:593 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:00:09:593 -> Flags: 0
13:00:10:601 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:00:10:613 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:00:10:614 -> Flags: 0
13:00:11:622 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:00:11:635 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:00:11:635 -> Flags: 0
13:00:12:634 -> Calibration Timeout
13:00:12:635 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:00:15:262 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:00:15:262 -> [ApiClient] Info: Return code: 200
13:00:15:264 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:00:15:265 -> [Configure] Info: Parse configure success
13:00:15:266 -> [Configure] Info: Detected new firmware version: 3.1.9
13:00:15:267 -> state: 12
13:00:16:186 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:00:16:187 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":415,"boot":64,"bootCount":64}
13:00:16:187 -> [ApiClient] Info: Return code: 200
13:00:16:188 -> 
13:00:16:188 -> Online mode and isPostToAirGradient = true: watchdog reset
13:00:16:188 -> 
13:00:16:209 -> CO2 (ppm): 409
13:00:16:234 -> External watchdog feed!
13:00:20:231 -> CO2 (ppm): 434
13:00:24:250 -> CO2 (ppm): 499
13:00:28:271 -> CO2 (ppm): 546
13:00:32:292 -> CO2 (ppm): 562
13:00:36:312 -> CO2 (ppm): 562
13:00:40:332 -> CO2 (ppm): 556
13:00:44:353 -> CO2 (ppm): 544
13:00:48:380 -> CO2 (ppm): 530
13:00:52:395 -> CO2 (ppm): 515
13:00:56:415 -> CO2 (ppm): 508
13:01:00:435 -> CO2 (ppm): 543
13:01:04:456 -> CO2 (ppm): 581
13:01:08:477 -> CO2 (ppm): 602
13:01:12:498 -> CO2 (ppm): 601
13:01:14:655 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:01:14:656 -> [Configure] Info: Parse configure success
13:01:14:656 -> [Configure] Info: co2CalibrationRequested: True
13:01:14:657 -> [Configure] Info: Detected new firmware version: 3.1.9
13:01:14:657 -> state: 12
13:01:14:657 -> [StateMachine] Info: CO2 Calibration
13:01:14:657 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:01:15:656 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:01:16:656 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:01:17:656 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:01:18:656 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:01:21:664 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:01:21:679 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:01:21:687 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:01:21:702 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:01:21:702 -> [StateMachine] Info: CO2 Calibration: success
13:01:22:701 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:01:22:710 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:01:22:722 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:01:22:722 -> Flags: 0
13:01:23:730 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:01:23:743 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:01:23:744 -> Flags: 0
13:01:24:751 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:01:24:764 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:01:24:765 -> Flags: 0
13:01:25:772 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:01:25:785 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:01:25:785 -> Flags: 0
13:01:26:793 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:01:26:806 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:01:26:806 -> Flags: 0
13:01:27:806 -> Calibration Timeout
13:01:27:807 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:01:30:422 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:01:30:423 -> [ApiClient] Info: Return code: 200
13:01:30:424 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:01:30:426 -> [Configure] Info: Parse configure success
13:01:30:426 -> [Configure] Info: Detected new firmware version: 3.1.9
13:01:30:427 -> state: 12
13:01:31:348 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:01:31:348 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":601,"boot":65,"bootCount":65}
13:01:31:348 -> [ApiClient] Info: Return code: 200
13:01:31:349 -> 
13:01:31:350 -> Online mode and isPostToAirGradient = true: watchdog reset
13:01:31:350 -> 
13:01:31:370 -> CO2 (ppm): 539
13:01:31:395 -> External watchdog feed!
13:01:35:391 -> CO2 (ppm): 520
13:01:39:412 -> CO2 (ppm): 503
13:01:43:471 -> CO2 (ppm): 488
13:01:47:491 -> CO2 (ppm): 476
13:01:51:514 -> CO2 (ppm): 567
13:01:55:532 -> CO2 (ppm): 583
13:01:59:552 -> CO2 (ppm): 582
13:02:03:574 -> CO2 (ppm): 572
13:02:07:594 -> CO2 (ppm): 557
13:02:11:614 -> CO2 (ppm): 541
13:02:15:634 -> CO2 (ppm): 524
13:02:19:655 -> CO2 (ppm): 506
13:02:23:675 -> CO2 (ppm): 490
13:02:27:695 -> CO2 (ppm): 477
13:02:29:826 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:02:29:826 -> [Configure] Info: Parse configure success
13:02:29:827 -> [Configure] Info: co2CalibrationRequested: True
13:02:29:827 -> [Configure] Info: Detected new firmware version: 3.1.9
13:02:29:827 -> state: 12
13:02:29:827 -> [StateMachine] Info: CO2 Calibration
13:02:29:827 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:02:30:827 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:02:31:827 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:02:32:827 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:02:33:827 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:02:36:835 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:02:36:849 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:02:36:857 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:02:36:872 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:02:36:872 -> [StateMachine] Info: CO2 Calibration: success
13:02:37:872 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:02:37:880 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:02:37:893 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:02:37:894 -> Flags: 0
13:02:38:901 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:02:38:914 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:02:38:914 -> Flags: 0
13:02:39:922 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:02:39:935 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:02:39:936 -> Flags: 0
13:02:40:943 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:02:40:956 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:02:40:956 -> Flags: 0
13:02:41:964 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:02:41:977 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:02:41:977 -> Flags: 0
13:02:42:977 -> Calibration Timeout
13:02:42:977 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:02:45:583 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:02:45:583 -> [ApiClient] Info: Return code: 200
13:02:45:584 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:02:45:587 -> [Configure] Info: Parse configure success
13:02:45:587 -> [Configure] Info: Detected new firmware version: 3.1.9
13:02:45:588 -> state: 12
13:02:46:520 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:02:46:521 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":477,"boot":66,"bootCount":66}
13:02:46:521 -> [ApiClient] Info: Return code: 200
13:02:46:522 -> 
13:02:46:522 -> Online mode and isPostToAirGradient = true: watchdog reset
13:02:46:522 -> 
13:02:46:544 -> CO2 (ppm): 439
13:02:46:569 -> External watchdog feed!
13:02:50:574 -> CO2 (ppm): 432
13:02:58:607 -> CO2 (ppm): 427
13:02:58:607 -> CO2 (ppm): 423
13:03:02:627 -> CO2 (ppm): 420
13:03:06:648 -> CO2 (ppm): 416
13:03:10:668 -> CO2 (ppm): 412
13:03:14:689 -> CO2 (ppm): 411
13:03:18:710 -> CO2 (ppm): 409
13:03:22:734 -> CO2 (ppm): 408
13:03:26:751 -> CO2 (ppm): 406
13:03:30:771 -> CO2 (ppm): 405
13:03:34:791 -> CO2 (ppm): 405
13:03:38:811 -> CO2 (ppm): 404
13:03:42:832 -> CO2 (ppm): 403
13:03:44:997 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:03:44:998 -> [Configure] Info: Parse configure success
13:03:44:998 -> [Configure] Info: co2CalibrationRequested: True
13:03:44:999 -> [Configure] Info: Detected new firmware version: 3.1.9
13:03:44:999 -> state: 12
13:03:44:999 -> [StateMachine] Info: CO2 Calibration
13:03:45:000 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:03:45:999 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:03:46:999 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:03:47:999 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:03:52:007 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:03:52:007 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:03:52:021 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:03:52:029 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:03:52:044 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:03:52:044 -> [StateMachine] Info: CO2 Calibration: success
13:03:53:044 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:03:53:052 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:03:53:065 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:03:53:065 -> Flags: 0
13:03:54:073 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:03:54:086 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:03:54:086 -> Flags: 0
13:03:55:094 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:03:55:107 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:03:55:107 -> Flags: 0
13:03:56:115 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:03:56:128 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:03:56:128 -> Flags: 0
13:03:57:136 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:03:57:149 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:03:57:149 -> Flags: 0
13:03:58:149 -> Calibration Timeout
13:03:58:149 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:04:00:745 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:04:00:745 -> [ApiClient] Info: Return code: 200
13:04:00:746 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:04:00:748 -> [Configure] Info: Parse configure success
13:04:00:750 -> [Configure] Info: Detected new firmware version: 3.1.9
13:04:00:751 -> state: 12
13:04:01:681 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:04:01:682 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":403,"boot":67,"bootCount":67}
13:04:01:682 -> [ApiClient] Info: Return code: 200
13:04:01:682 -> 
13:04:01:682 -> Online mode and isPostToAirGradient = true: watchdog reset
13:04:01:682 -> 
13:04:01:703 -> CO2 (ppm): 401
13:04:01:727 -> External watchdog feed!
13:04:05:723 -> CO2 (ppm): 402
13:04:09:744 -> CO2 (ppm): 402
13:04:13:765 -> CO2 (ppm): 402
13:04:17:784 -> CO2 (ppm): 402
13:04:21:804 -> CO2 (ppm): 403
13:04:25:825 -> CO2 (ppm): 402
13:04:29:845 -> CO2 (ppm): 402
13:04:33:865 -> CO2 (ppm): 402
13:04:37:885 -> CO2 (ppm): 402
13:04:41:905 -> CO2 (ppm): 402
13:04:45:925 -> CO2 (ppm): 401
13:04:49:966 -> CO2 (ppm): 401
13:04:53:965 -> CO2 (ppm): 401
13:04:57:985 -> CO2 (ppm): 401
13:05:00:169 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:05:00:170 -> [Configure] Info: Parse configure success
13:05:00:170 -> [Configure] Info: co2CalibrationRequested: True
13:05:00:170 -> [Configure] Info: Detected new firmware version: 3.1.9
13:05:00:170 -> state: 12
13:05:00:170 -> [StateMachine] Info: CO2 Calibration
13:05:00:171 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:05:01:170 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:05:02:170 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:05:03:170 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:05:04:170 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:05:07:178 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:05:07:193 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:05:07:202 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:05:07:216 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:05:07:216 -> [StateMachine] Info: CO2 Calibration: success
13:05:08:216 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:05:08:225 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:05:08:238 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:05:08:238 -> Flags: 20
13:05:08:238 -> Success calibration!
13:05:08:238 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:05:10:889 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:05:10:889 -> [ApiClient] Info: Return code: 200
13:05:10:891 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:05:10:892 -> [Configure] Info: Parse configure success
13:05:10:893 -> [Configure] Info: Detected new firmware version: 3.1.9
13:05:10:895 -> state: 12
13:05:11:937 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:05:11:937 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":401,"boot":68,"bootCount":68}
13:05:11:937 -> [ApiClient] Info: Return code: 200
13:05:11:938 -> 
13:05:11:938 -> Online mode and isPostToAirGradient = true: watchdog reset
13:05:11:938 -> 
13:05:11:960 -> CO2 (ppm): 402
13:05:11:984 -> External watchdog feed!
13:05:15:982 -> CO2 (ppm): 402
13:05:20:001 -> CO2 (ppm): 402
13:05:28:045 -> CO2 (ppm): 402
13:05:28:045 -> CO2 (ppm): 402
13:05:32:063 -> CO2 (ppm): 402
13:05:36:083 -> CO2 (ppm): 402
13:05:40:102 -> CO2 (ppm): 405
13:05:44:122 -> CO2 (ppm): 430
13:05:52:163 -> CO2 (ppm): 458
13:05:52:163 -> CO2 (ppm): 478
13:05:56:184 -> CO2 (ppm): 484
13:06:04:225 -> CO2 (ppm): 483
13:06:04:225 -> CO2 (ppm): 479
13:06:08:245 -> CO2 (ppm): 472
13:06:10:256 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:06:10:258 -> [Configure] Info: Parse configure success
13:06:10:258 -> [Configure] Info: co2CalibrationRequested: True
13:06:10:258 -> [Configure] Info: Detected new firmware version: 3.1.9
13:06:10:259 -> state: 12
13:06:10:259 -> [StateMachine] Info: CO2 Calibration
13:06:10:259 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:06:11:258 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:06:12:258 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:06:13:258 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:06:17:266 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:06:17:266 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:06:17:280 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:06:17:288 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:06:17:302 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:06:17:302 -> [StateMachine] Info: CO2 Calibration: success
13:06:18:302 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:06:18:310 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:06:18:323 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:06:18:323 -> Flags: 0
13:06:19:331 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:06:19:344 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:06:19:344 -> Flags: 0
13:06:20:352 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:06:20:365 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:06:20:365 -> Flags: 0
13:06:21:373 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:06:21:386 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:06:21:386 -> Flags: 0
13:06:22:394 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:06:22:407 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:06:22:407 -> Flags: 0
13:06:23:407 -> Calibration Timeout
13:06:23:408 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:06:26:151 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:06:26:151 -> [ApiClient] Info: Return code: 200
13:06:26:152 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:06:26:154 -> [Configure] Info: Parse configure success
13:06:26:155 -> [Configure] Info: Detected new firmware version: 3.1.9
13:06:26:156 -> state: 12
13:06:27:199 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:06:27:199 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":472,"boot":69,"bootCount":69}
13:06:27:200 -> [ApiClient] Info: Return code: 200
13:06:27:201 -> 
13:06:27:201 -> Online mode and isPostToAirGradient = true: watchdog reset
13:06:27:201 -> 
13:06:27:222 -> CO2 (ppm): 441
13:06:27:247 -> External watchdog feed!
13:06:31:242 -> CO2 (ppm): 434
13:06:35:262 -> CO2 (ppm): 429
13:06:39:283 -> CO2 (ppm): 424
13:06:43:303 -> CO2 (ppm): 421
13:06:47:324 -> CO2 (ppm): 418
13:06:51:343 -> CO2 (ppm): 413
13:06:55:363 -> CO2 (ppm): 412
13:06:59:383 -> CO2 (ppm): 410
13:07:03:404 -> CO2 (ppm): 407
13:07:07:425 -> CO2 (ppm): 406
13:07:11:445 -> CO2 (ppm): 405
13:07:15:466 -> CO2 (ppm): 403
13:07:19:487 -> CO2 (ppm): 401
13:07:23:508 -> CO2 (ppm): 400
13:07:25:427 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:07:25:427 -> [Configure] Info: Parse configure success
13:07:25:428 -> [Configure] Info: co2CalibrationRequested: True
13:07:25:428 -> [Configure] Info: Detected new firmware version: 3.1.9
13:07:25:428 -> state: 12
13:07:25:428 -> [StateMachine] Info: CO2 Calibration
13:07:25:428 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:07:26:433 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:07:27:428 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:07:28:428 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:07:29:428 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:07:32:436 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:07:32:450 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:07:32:458 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:07:32:472 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:07:32:472 -> [StateMachine] Info: CO2 Calibration: success
13:07:33:472 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:07:33:480 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:07:33:493 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:07:33:493 -> Flags: 0
13:07:34:501 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:07:34:514 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:07:34:514 -> Flags: 0
13:07:35:522 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:07:35:535 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:07:35:535 -> Flags: 0
13:07:36:543 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:07:36:556 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:07:36:556 -> Flags: 0
13:07:37:564 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:07:37:577 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:07:37:577 -> Flags: 0
13:07:38:577 -> Calibration Timeout
13:07:38:577 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:07:41:211 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:07:41:212 -> [ApiClient] Info: Return code: 200
13:07:41:213 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:07:41:214 -> [Configure] Info: Parse configure success
13:07:41:215 -> [Configure] Info: Detected new firmware version: 3.1.9
13:07:41:218 -> state: 12
13:07:42:143 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:07:42:143 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":400,"boot":70,"bootCount":70}
13:07:42:143 -> [ApiClient] Info: Return code: 200
13:07:42:144 -> 
13:07:42:144 -> Online mode and isPostToAirGradient = true: watchdog reset
13:07:42:144 -> 
13:07:42:165 -> CO2 (ppm): 401
13:07:42:190 -> External watchdog feed!
13:07:46:185 -> CO2 (ppm): 403
13:07:50:205 -> CO2 (ppm): 403
13:07:54:226 -> CO2 (ppm): 403
13:07:58:254 -> CO2 (ppm): 403
13:08:02:266 -> CO2 (ppm): 403
13:08:06:335 -> CO2 (ppm): 438
13:08:10:356 -> CO2 (ppm): 502
13:08:14:376 -> CO2 (ppm): 575
13:08:18:397 -> CO2 (ppm): 582
13:08:22:418 -> CO2 (ppm): 576
13:08:26:438 -> CO2 (ppm): 562
13:08:30:459 -> CO2 (ppm): 546
13:08:34:480 -> CO2 (ppm): 528
13:08:38:506 -> CO2 (ppm): 511
13:08:40:597 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:08:40:597 -> [Configure] Info: Parse configure success
13:08:40:597 -> [Configure] Info: co2CalibrationRequested: True
13:08:40:599 -> [Configure] Info: Detected new firmware version: 3.1.9
13:08:40:599 -> state: 12
13:08:40:599 -> [StateMachine] Info: CO2 Calibration
13:08:40:599 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:08:41:598 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:08:42:598 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:08:43:598 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:08:44:598 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:08:47:606 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:08:47:619 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:08:47:628 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:08:47:642 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:08:47:643 -> [StateMachine] Info: CO2 Calibration: success
13:08:48:643 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:08:48:652 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:08:48:664 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:08:48:664 -> Flags: 0
13:08:49:672 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:08:49:684 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:08:49:685 -> Flags: 0
13:08:50:693 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:08:50:705 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:08:50:706 -> Flags: 0
13:08:51:714 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:08:51:726 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:08:51:727 -> Flags: 0
13:08:52:735 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:08:52:747 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:08:52:748 -> Flags: 0
13:08:53:747 -> Calibration Timeout
13:08:53:748 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:08:56:374 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:08:56:374 -> [ApiClient] Info: Return code: 200
13:08:56:375 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:08:56:377 -> [Configure] Info: Parse configure success
13:08:56:378 -> [Configure] Info: Detected new firmware version: 3.1.9
13:08:56:380 -> state: 12
13:08:57:329 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:08:57:330 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":511,"boot":71,"bootCount":71}
13:08:57:330 -> [ApiClient] Info: Return code: 200
13:08:57:330 -> 
13:08:57:330 -> Online mode and isPostToAirGradient = true: watchdog reset
13:08:57:330 -> 
13:08:57:351 -> CO2 (ppm): 455
13:08:57:376 -> External watchdog feed!
13:09:01:372 -> CO2 (ppm): 444
13:09:05:392 -> CO2 (ppm): 437
13:09:13:433 -> CO2 (ppm): 430
13:09:13:433 -> CO2 (ppm): 425
13:09:17:454 -> CO2 (ppm): 420
13:09:25:495 -> CO2 (ppm): 416
13:09:25:495 -> CO2 (ppm): 412
13:09:29:516 -> CO2 (ppm): 409
13:09:33:537 -> CO2 (ppm): 408
13:09:41:578 -> CO2 (ppm): 406
13:09:41:578 -> CO2 (ppm): 405
13:09:45:599 -> CO2 (ppm): 404
13:09:49:619 -> CO2 (ppm): 403
13:09:53:640 -> CO2 (ppm): 403
13:09:55:767 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:09:55:769 -> [Configure] Info: Parse configure success
13:09:55:769 -> [Configure] Info: co2CalibrationRequested: True
13:09:55:769 -> [Configure] Info: Detected new firmware version: 3.1.9
13:09:55:770 -> state: 12
13:09:55:770 -> [StateMachine] Info: CO2 Calibration
13:09:55:770 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:09:56:769 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:09:57:769 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:09:58:769 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:09:59:769 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:10:02:777 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:10:02:791 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:10:02:799 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:10:02:813 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:10:02:814 -> [StateMachine] Info: CO2 Calibration: success
13:10:03:813 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:10:03:821 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:10:03:834 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:10:03:834 -> Flags: 0
13:10:04:842 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:10:04:855 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:10:04:856 -> Flags: 0
13:10:05:863 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:10:05:876 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:10:05:876 -> Flags: 0
13:10:06:884 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:10:06:896 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:10:06:897 -> Flags: 0
13:10:07:905 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:10:07:917 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:10:07:918 -> Flags: 0
13:10:08:918 -> Calibration Timeout
13:10:08:918 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:10:11:534 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:10:11:534 -> [ApiClient] Info: Return code: 200
13:10:11:535 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:10:11:537 -> [Configure] Info: Parse configure success
13:10:11:538 -> [Configure] Info: Detected new firmware version: 3.1.9
13:10:11:539 -> state: 12
13:10:12:480 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:10:12:481 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":403,"boot":72,"bootCount":72}
13:10:12:481 -> [ApiClient] Info: Return code: 200
13:10:12:482 -> 
13:10:12:482 -> Online mode and isPostToAirGradient = true: watchdog reset
13:10:12:482 -> 
13:10:12:504 -> CO2 (ppm): 400
13:10:12:529 -> External watchdog feed!
13:10:16:525 -> CO2 (ppm): 400
13:10:20:545 -> CO2 (ppm): 399
13:10:24:565 -> CO2 (ppm): 398
13:10:28:585 -> CO2 (ppm): 398
13:10:32:606 -> CO2 (ppm): 398
13:10:36:625 -> CO2 (ppm): 398
13:10:44:666 -> CO2 (ppm): 398
13:10:44:666 -> CO2 (ppm): 398
13:10:48:686 -> CO2 (ppm): 398
13:10:52:707 -> CO2 (ppm): 398
13:10:56:727 -> CO2 (ppm): 398
13:11:00:747 -> CO2 (ppm): 398
13:11:04:768 -> CO2 (ppm): 398
13:11:08:788 -> CO2 (ppm): 398
13:11:10:938 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:11:10:939 -> [Configure] Info: Parse configure success
13:11:10:939 -> [Configure] Info: co2CalibrationRequested: True
13:11:10:939 -> [Configure] Info: Detected new firmware version: 3.1.9
13:11:10:939 -> state: 12
13:11:10:939 -> [StateMachine] Info: CO2 Calibration
13:11:10:954 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:11:11:939 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:11:12:939 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:11:13:939 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:11:14:939 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:11:17:947 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:11:17:961 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:11:17:969 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:11:17:983 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:11:17:984 -> [StateMachine] Info: CO2 Calibration: success
13:11:18:984 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:11:18:992 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:11:19:005 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:11:19:006 -> Flags: 20
13:11:19:006 -> Success calibration!
13:11:19:006 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:11:21:678 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:11:21:678 -> [ApiClient] Info: Return code: 200
13:11:21:679 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:11:21:681 -> [Configure] Info: Parse configure success
13:11:21:681 -> [Configure] Info: Detected new firmware version: 3.1.9
13:11:21:683 -> state: 12
13:11:22:613 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:11:22:614 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":398,"boot":73,"bootCount":73}
13:11:22:614 -> [ApiClient] Info: Return code: 200
13:11:22:615 -> 
13:11:22:615 -> Online mode and isPostToAirGradient = true: watchdog reset
13:11:22:615 -> 
13:11:22:636 -> CO2 (ppm): 400
13:11:22:661 -> External watchdog feed!
13:11:26:656 -> CO2 (ppm): 400
13:11:30:677 -> CO2 (ppm): 401
13:11:34:697 -> CO2 (ppm): 401
13:11:38:718 -> CO2 (ppm): 401
13:11:42:739 -> CO2 (ppm): 400
13:11:46:760 -> CO2 (ppm): 401
13:11:50:779 -> CO2 (ppm): 401
13:11:54:799 -> CO2 (ppm): 401
13:11:58:820 -> CO2 (ppm): 401
13:12:02:841 -> CO2 (ppm): 401
13:12:06:862 -> CO2 (ppm): 401
13:12:10:883 -> CO2 (ppm): 401
13:12:14:904 -> CO2 (ppm): 401
13:12:18:924 -> CO2 (ppm): 401
13:12:21:025 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:12:21:025 -> [Configure] Info: Parse configure success
13:12:21:025 -> [Configure] Info: co2CalibrationRequested: True
13:12:21:026 -> [Configure] Info: Detected new firmware version: 3.1.9
13:12:21:027 -> state: 12
13:12:21:027 -> [StateMachine] Info: CO2 Calibration
13:12:21:027 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:12:22:026 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:12:23:026 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:12:24:026 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:12:25:026 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:12:28:034 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:12:28:048 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:12:28:056 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:12:28:071 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:12:28:071 -> [StateMachine] Info: CO2 Calibration: success
13:12:29:071 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:12:29:079 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:12:29:092 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:12:29:092 -> Flags: 20
13:12:29:092 -> Success calibration!
13:12:29:092 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:12:31:719 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:12:31:720 -> [ApiClient] Info: Return code: 200
13:12:31:721 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:12:31:723 -> [Configure] Info: Parse configure success
13:12:31:723 -> [Configure] Info: Detected new firmware version: 3.1.9
13:12:31:725 -> state: 12
13:12:32:675 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:12:32:675 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":401,"boot":74,"bootCount":74}
13:12:32:675 -> [ApiClient] Info: Return code: 200
13:12:32:676 -> 
13:12:32:676 -> Online mode and isPostToAirGradient = true: watchdog reset
13:12:32:676 -> 
13:12:32:697 -> CO2 (ppm): 400
13:12:32:722 -> External watchdog feed!
13:12:36:717 -> CO2 (ppm): 405
13:12:40:738 -> CO2 (ppm): 415
13:12:44:758 -> CO2 (ppm): 452
13:12:48:778 -> CO2 (ppm): 501
13:12:52:799 -> CO2 (ppm): 519
13:12:56:820 -> CO2 (ppm): 523
13:13:00:840 -> CO2 (ppm): 520
13:13:04:861 -> CO2 (ppm): 512
13:13:08:882 -> CO2 (ppm): 501
13:13:12:902 -> CO2 (ppm): 490
13:13:20:944 -> CO2 (ppm): 479
13:13:20:944 -> CO2 (ppm): 468
13:13:24:965 -> CO2 (ppm): 457
13:13:28:985 -> CO2 (ppm): 447
13:13:31:112 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:13:31:113 -> [Configure] Info: Parse configure success
13:13:31:113 -> [Configure] Info: co2CalibrationRequested: True
13:13:31:114 -> [Configure] Info: Detected new firmware version: 3.1.9
13:13:31:114 -> state: 12
13:13:31:114 -> [StateMachine] Info: CO2 Calibration
13:13:31:114 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:13:32:121 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:13:33:113 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:13:34:113 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:13:35:113 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:13:38:122 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:13:38:135 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:13:38:144 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:13:38:157 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:13:38:157 -> [StateMachine] Info: CO2 Calibration: success
13:13:39:157 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:13:39:165 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:13:39:178 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:13:39:178 -> Flags: 0
13:13:40:186 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:13:40:199 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:13:40:200 -> Flags: 0
13:13:41:207 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:13:41:220 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:13:41:220 -> Flags: 0
13:13:42:228 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:13:42:241 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:13:42:241 -> Flags: 0
13:13:43:249 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:13:43:262 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:13:43:262 -> Flags: 0
13:13:44:262 -> Calibration Timeout
13:13:44:262 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:13:46:840 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:13:46:840 -> [ApiClient] Info: Return code: 200
13:13:46:842 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:13:46:843 -> [Configure] Info: Parse configure success
13:13:46:844 -> [Configure] Info: Detected new firmware version: 3.1.9
13:13:46:846 -> state: 12
13:13:47:724 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:13:47:725 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":447,"boot":75,"bootCount":75}
13:13:47:725 -> [ApiClient] Info: Return code: 200
13:13:47:725 -> 
13:13:47:725 -> Online mode and isPostToAirGradient = true: watchdog reset
13:13:47:726 -> 
13:13:47:747 -> CO2 (ppm): 418
13:13:47:772 -> External watchdog feed!
13:13:51:767 -> CO2 (ppm): 416
13:13:55:788 -> CO2 (ppm): 413
13:13:59:808 -> CO2 (ppm): 411
13:14:03:829 -> CO2 (ppm): 409
13:14:07:850 -> CO2 (ppm): 408
13:14:11:871 -> CO2 (ppm): 406
13:14:15:891 -> CO2 (ppm): 406
13:14:19:912 -> CO2 (ppm): 406
13:14:27:953 -> CO2 (ppm): 409
13:14:27:953 -> CO2 (ppm): 409
13:14:31:973 -> CO2 (ppm): 410
13:14:35:992 -> CO2 (ppm): 410
13:14:40:013 -> CO2 (ppm): 410
13:14:44:033 -> CO2 (ppm): 410
13:14:46:282 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:14:46:283 -> [Configure] Info: Parse configure success
13:14:46:283 -> [Configure] Info: co2CalibrationRequested: True
13:14:46:284 -> [Configure] Info: Detected new firmware version: 3.1.9
13:14:46:284 -> state: 12
13:14:46:284 -> [StateMachine] Info: CO2 Calibration
13:14:46:284 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:14:47:284 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:14:49:284 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:14:49:284 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:14:50:284 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:14:53:292 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:14:53:305 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:14:53:314 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:14:53:328 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:14:53:329 -> [StateMachine] Info: CO2 Calibration: success
13:14:54:329 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:14:54:337 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:14:54:349 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:14:54:350 -> Flags: 0
13:14:55:358 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:14:55:370 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:14:55:371 -> Flags: 0
13:14:56:379 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:14:56:391 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:14:56:392 -> Flags: 0
13:14:57:400 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:14:57:412 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:14:57:413 -> Flags: 0
13:14:58:421 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:14:58:433 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:14:58:434 -> Flags: 0
13:14:59:434 -> Calibration Timeout
13:14:59:434 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:15:02:038 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:15:02:038 -> [ApiClient] Info: Return code: 200
13:15:02:039 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:15:02:041 -> [Configure] Info: Parse configure success
13:15:02:041 -> [Configure] Info: Detected new firmware version: 3.1.9
13:15:02:043 -> state: 12
13:15:02:979 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:15:02:984 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":410,"boot":76,"bootCount":76}
13:15:02:984 -> [ApiClient] Info: Return code: 200
13:15:02:984 -> 
13:15:02:984 -> Online mode and isPostToAirGradient = true: watchdog reset
13:15:02:984 -> 
13:15:03:001 -> CO2 (ppm): 405
13:15:03:026 -> External watchdog feed!
13:15:11:042 -> CO2 (ppm): 404
13:15:11:042 -> CO2 (ppm): 403
13:15:15:063 -> CO2 (ppm): 403
13:15:19:083 -> CO2 (ppm): 402
13:15:23:103 -> CO2 (ppm): 402
13:15:27:124 -> CO2 (ppm): 403
13:15:31:144 -> CO2 (ppm): 403
13:15:39:185 -> CO2 (ppm): 403
13:15:39:185 -> CO2 (ppm): 404
13:15:43:205 -> CO2 (ppm): 403
13:15:47:226 -> CO2 (ppm): 403
13:15:51:246 -> CO2 (ppm): 403
13:15:55:266 -> CO2 (ppm): 405
13:16:01:454 -> CO2 (ppm): 406
13:16:01:454 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:16:01:454 -> [Configure] Info: Parse configure success
13:16:01:454 -> [Configure] Info: co2CalibrationRequested: True
13:16:01:455 -> [Configure] Info: Detected new firmware version: 3.1.9
13:16:01:455 -> state: 12
13:16:01:455 -> [StateMachine] Info: CO2 Calibration
13:16:01:455 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:16:02:455 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:16:03:455 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:16:04:455 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:16:05:455 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:16:08:463 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:16:08:476 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:16:08:485 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:16:08:499 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:16:08:500 -> [StateMachine] Info: CO2 Calibration: success
13:16:09:499 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:16:09:508 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:16:09:520 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:16:09:521 -> Flags: 0
13:16:10:529 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:16:10:541 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:16:10:542 -> Flags: 0
13:16:11:550 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:16:11:562 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:16:11:562 -> Flags: 0
13:16:12:571 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:16:12:583 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:16:12:583 -> Flags: 0
13:16:13:596 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:16:13:604 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:16:13:604 -> Flags: 0
13:16:14:604 -> Calibration Timeout
13:16:14:605 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:16:17:203 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:16:17:205 -> [ApiClient] Info: Return code: 200
13:16:17:206 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:16:17:206 -> [Configure] Info: Parse configure success
13:16:17:207 -> [Configure] Info: Detected new firmware version: 3.1.9
13:16:17:209 -> state: 12
13:16:18:150 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:16:18:150 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":406,"boot":77,"bootCount":77}
13:16:18:150 -> [ApiClient] Info: Return code: 200
13:16:18:173 -> 
13:16:18:173 -> Online mode and isPostToAirGradient = true: watchdog reset
13:16:18:173 -> 
13:16:18:173 -> CO2 (ppm): 405
13:16:18:198 -> External watchdog feed!
13:16:22:193 -> CO2 (ppm): 405
13:16:26:214 -> CO2 (ppm): 407
13:16:30:235 -> CO2 (ppm): 412
13:16:34:255 -> CO2 (ppm): 413
13:16:38:276 -> CO2 (ppm): 413
13:16:42:296 -> CO2 (ppm): 413
13:16:50:336 -> CO2 (ppm): 413
13:16:50:336 -> CO2 (ppm): 412
13:16:54:356 -> CO2 (ppm): 410
13:16:58:377 -> CO2 (ppm): 409
13:17:02:397 -> CO2 (ppm): 409
13:17:06:420 -> CO2 (ppm): 430
13:17:10:438 -> CO2 (ppm): 495
13:17:16:625 -> CO2 (ppm): 610
13:17:16:625 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:17:16:626 -> [Configure] Info: co2CalibrationRequested: True
13:17:16:625 -> [Configure] Info: Parse configure success
13:17:16:626 -> [Configure] Info: Detected new firmware version: 3.1.9
13:17:16:626 -> state: 12
13:17:16:627 -> [StateMachine] Info: CO2 Calibration
13:17:16:627 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:17:17:626 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:17:18:626 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:17:19:626 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:17:20:626 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:17:23:634 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:17:23:648 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:17:23:656 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:17:23:671 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:17:23:671 -> [StateMachine] Info: CO2 Calibration: success
13:17:24:671 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:17:24:679 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:17:24:692 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:17:24:692 -> Flags: 0
13:17:25:700 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:17:25:713 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:17:25:713 -> Flags: 0
13:17:26:721 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:17:26:734 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:17:26:734 -> Flags: 0
13:17:27:742 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:17:27:755 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:17:27:755 -> Flags: 0
13:17:28:763 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:17:28:776 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:17:28:776 -> Flags: 0
13:17:29:776 -> Calibration Timeout
13:17:29:776 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:17:32:364 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:17:32:364 -> [ApiClient] Info: Return code: 200
13:17:32:366 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:17:32:367 -> [Configure] Info: Parse configure success
13:17:32:368 -> [Configure] Info: Detected new firmware version: 3.1.9
13:17:32:369 -> state: 12
13:17:33:293 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:17:33:293 -> [ApiClient] Info: DATA: {"wifi":-62,"rco2":610,"boot":78,"bootCount":78}
13:17:33:293 -> [ApiClient] Info: Return code: 200
13:17:33:294 -> 
13:17:33:294 -> Online mode and isPostToAirGradient = true: watchdog reset
13:17:33:294 -> 
13:17:33:316 -> CO2 (ppm): 963
13:17:33:341 -> External watchdog feed!
13:17:46:345 -> Get CO2 failed: 1
13:17:46:345 -> CO2 (ppm): 979
13:17:50:366 -> CO2 (ppm): 861
13:17:54:387 -> CO2 (ppm): 771
13:17:58:407 -> CO2 (ppm): 697
13:18:02:426 -> CO2 (ppm): 637
13:18:06:447 -> CO2 (ppm): 590
13:18:10:468 -> CO2 (ppm): 556
13:18:14:487 -> CO2 (ppm): 520
13:18:18:508 -> CO2 (ppm): 517
13:18:22:527 -> CO2 (ppm): 508
13:18:26:548 -> CO2 (ppm): 496
13:18:30:568 -> CO2 (ppm): 497
13:18:31:796 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:18:31:797 -> [Configure] Info: Parse configure success
13:18:31:797 -> [Configure] Info: co2CalibrationRequested: True
13:18:31:798 -> [Configure] Info: Detected new firmware version: 3.1.9
13:18:31:798 -> state: 12
13:18:31:798 -> [StateMachine] Info: CO2 Calibration
13:18:31:798 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:18:32:797 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:18:33:797 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:18:34:797 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:18:35:797 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:18:38:805 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:18:38:820 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:18:38:828 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:18:38:842 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:18:38:843 -> [StateMachine] Info: CO2 Calibration: success
13:18:39:842 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:18:39:862 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:18:39:863 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:18:39:863 -> Flags: 0
13:18:40:872 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:18:40:884 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:18:40:905 -> Flags: 0
13:18:41:892 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:18:41:905 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:18:41:906 -> Flags: 0
13:18:42:913 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:18:42:926 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:18:42:927 -> Flags: 0
13:18:43:934 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:18:43:947 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:18:43:948 -> Flags: 0
13:18:44:947 -> Calibration Timeout
13:18:44:948 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:18:47:527 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:18:47:527 -> [ApiClient] Info: Return code: 200
13:18:47:529 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:18:47:531 -> [Configure] Info: Parse configure success
13:18:47:532 -> [Configure] Info: Detected new firmware version: 3.1.9
13:18:47:533 -> state: 12
13:18:48:493 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:18:48:495 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":497,"boot":79,"bootCount":79}
13:18:48:495 -> [ApiClient] Info: Return code: 200
13:18:48:495 -> 
13:18:48:495 -> Online mode and isPostToAirGradient = true: watchdog reset
13:18:48:495 -> 
13:18:48:516 -> CO2 (ppm): 474
13:18:48:541 -> External watchdog feed!
13:18:52:536 -> CO2 (ppm): 464
13:18:56:556 -> CO2 (ppm): 454
13:19:00:576 -> CO2 (ppm): 446
13:19:04:597 -> CO2 (ppm): 439
13:19:08:618 -> CO2 (ppm): 432
13:19:12:639 -> CO2 (ppm): 426
13:19:16:659 -> CO2 (ppm): 422
13:19:20:679 -> CO2 (ppm): 418
13:19:24:712 -> CO2 (ppm): 415
13:19:32:739 -> CO2 (ppm): 413
13:19:32:739 -> CO2 (ppm): 410
13:19:36:759 -> CO2 (ppm): 409
13:19:40:779 -> CO2 (ppm): 406
13:19:44:798 -> CO2 (ppm): 404
13:19:46:967 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:19:46:968 -> [Configure] Info: Parse configure success
13:19:46:968 -> [Configure] Info: co2CalibrationRequested: True
13:19:46:968 -> [Configure] Info: Detected new firmware version: 3.1.9
13:19:46:969 -> state: 12
13:19:46:969 -> [StateMachine] Info: CO2 Calibration
13:19:46:969 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:19:47:968 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:19:48:968 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:19:50:968 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:19:50:969 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:19:53:995 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:19:53:996 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:19:53:999 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:19:54:014 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:19:54:015 -> [StateMachine] Info: CO2 Calibration: success
13:19:55:013 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:19:55:021 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:19:55:046 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:19:55:046 -> Flags: 0
13:19:56:042 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:19:56:055 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:19:56:056 -> Flags: 0
13:19:57:063 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:19:57:076 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:19:57:077 -> Flags: 0
13:19:58:084 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:19:58:097 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:19:58:098 -> Flags: 0
13:19:59:105 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:19:59:118 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:19:59:119 -> Flags: 0
13:20:00:118 -> Calibration Timeout
13:20:00:119 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:20:02:688 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:20:02:688 -> [ApiClient] Info: Return code: 200
13:20:02:690 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:20:02:691 -> [Configure] Info: Parse configure success
13:20:02:692 -> [Configure] Info: Detected new firmware version: 3.1.9
13:20:02:693 -> state: 12
13:20:03:653 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:20:03:653 -> [ApiClient] Info: DATA: {"wifi":-51,"rco2":404,"boot":80,"bootCount":80}
13:20:03:654 -> [ApiClient] Info: Return code: 200
13:20:03:655 -> 
13:20:03:655 -> Online mode and isPostToAirGradient = true: watchdog reset
13:20:03:655 -> 
13:20:03:677 -> CO2 (ppm): 399
13:20:03:702 -> External watchdog feed!
13:20:07:698 -> CO2 (ppm): 400
13:20:11:718 -> CO2 (ppm): 399
13:20:15:738 -> CO2 (ppm): 399
13:20:19:769 -> CO2 (ppm): 398
13:20:23:778 -> CO2 (ppm): 399
13:20:27:798 -> CO2 (ppm): 399
13:20:35:850 -> CO2 (ppm): 400
13:20:35:850 -> CO2 (ppm): 400
13:20:39:859 -> CO2 (ppm): 399
13:20:43:879 -> CO2 (ppm): 400
13:20:47:900 -> CO2 (ppm): 400
13:20:51:921 -> CO2 (ppm): 400
13:20:55:941 -> CO2 (ppm): 400
13:20:59:961 -> CO2 (ppm): 400
13:21:02:138 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:21:02:138 -> [Configure] Info: Parse configure success
13:21:02:138 -> [Configure] Info: co2CalibrationRequested: True
13:21:02:139 -> [Configure] Info: Detected new firmware version: 3.1.9
13:21:02:139 -> state: 12
13:21:02:139 -> [StateMachine] Info: CO2 Calibration
13:21:02:139 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:21:03:139 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:21:04:139 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:21:05:139 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:21:06:139 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:21:09:147 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:21:09:217 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:21:09:225 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:21:09:240 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:21:09:241 -> [StateMachine] Info: CO2 Calibration: success
13:21:10:240 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:21:10:248 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:21:10:260 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:21:10:261 -> Flags: 0
13:21:11:269 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:21:11:281 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:21:11:282 -> Flags: 0
13:21:12:290 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:21:12:303 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:21:12:303 -> Flags: 0
13:21:13:311 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:21:13:323 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:21:13:324 -> Flags: 0
13:21:14:332 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:21:14:345 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:21:14:345 -> Flags: 0
13:21:15:344 -> Calibration Timeout
13:21:15:345 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:21:17:952 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:21:17:952 -> [ApiClient] Info: Return code: 200
13:21:17:954 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:21:17:955 -> [Configure] Info: Parse configure success
13:21:17:956 -> [Configure] Info: Detected new firmware version: 3.1.9
13:21:17:957 -> state: 12
13:21:18:886 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:21:18:887 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":400,"boot":81,"bootCount":81}
13:21:18:887 -> [ApiClient] Info: Return code: 200
13:21:18:888 -> 
13:21:18:888 -> Online mode and isPostToAirGradient = true: watchdog reset
13:21:18:888 -> 
13:21:18:909 -> CO2 (ppm): 413
13:21:18:934 -> External watchdog feed!
13:21:22:930 -> CO2 (ppm): 415
13:21:26:949 -> CO2 (ppm): 414
13:21:30:969 -> CO2 (ppm): 413
13:21:34:990 -> CO2 (ppm): 414
13:21:39:010 -> CO2 (ppm): 412
13:21:43:031 -> CO2 (ppm): 410
13:21:47:052 -> CO2 (ppm): 411
13:21:51:073 -> CO2 (ppm): 412
13:21:55:094 -> CO2 (ppm): 413
13:21:59:116 -> CO2 (ppm): 416
13:22:07:157 -> CO2 (ppm): 416
13:22:07:157 -> CO2 (ppm): 416
13:22:11:178 -> CO2 (ppm): 415
13:22:15:199 -> CO2 (ppm): 411
13:22:17:365 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:22:17:366 -> [Configure] Info: Parse configure success
13:22:17:366 -> [Configure] Info: co2CalibrationRequested: True
13:22:17:366 -> [Configure] Info: Detected new firmware version: 3.1.9
13:22:17:367 -> state: 12
13:22:17:367 -> [StateMachine] Info: CO2 Calibration
13:22:17:367 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:22:18:366 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:22:19:366 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:22:20:366 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:22:21:366 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:22:24:374 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:22:24:388 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:22:24:396 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:22:24:411 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:22:24:411 -> [StateMachine] Info: CO2 Calibration: success
13:22:25:411 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:22:25:419 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:22:25:431 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:22:25:432 -> Flags: 0
13:22:26:440 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:22:26:453 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:22:26:453 -> Flags: 0
13:22:27:461 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:22:27:474 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:22:27:474 -> Flags: 0
13:22:28:482 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:22:28:494 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:22:28:495 -> Flags: 0
13:22:29:503 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:22:29:515 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:22:29:516 -> Flags: 0
13:22:30:515 -> Calibration Timeout
13:22:30:516 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:22:33:113 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:22:33:113 -> [ApiClient] Info: Return code: 200
13:22:33:114 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:22:33:116 -> [Configure] Info: Parse configure success
13:22:33:117 -> [Configure] Info: Detected new firmware version: 3.1.9
13:22:33:118 -> state: 12
13:22:34:049 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:22:34:049 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":411,"boot":82,"bootCount":82}
13:22:34:049 -> [ApiClient] Info: Return code: 200
13:22:34:050 -> 
13:22:34:050 -> Online mode and isPostToAirGradient = true: watchdog reset
13:22:34:050 -> 
13:22:34:070 -> CO2 (ppm): 405
13:22:34:096 -> External watchdog feed!
13:22:38:091 -> CO2 (ppm): 405
13:22:42:112 -> CO2 (ppm): 404
13:22:46:133 -> CO2 (ppm): 404
13:22:50:153 -> CO2 (ppm): 404
13:22:54:174 -> CO2 (ppm): 403
13:22:58:195 -> CO2 (ppm): 402
13:23:02:215 -> CO2 (ppm): 403
13:23:06:235 -> CO2 (ppm): 403
13:23:10:255 -> CO2 (ppm): 402
13:23:18:297 -> CO2 (ppm): 402
13:23:18:297 -> CO2 (ppm): 402
13:23:22:317 -> CO2 (ppm): 402
13:23:26:338 -> CO2 (ppm): 402
13:23:30:358 -> CO2 (ppm): 402
13:23:32:535 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:23:32:537 -> [Configure] Info: Parse configure success
13:23:32:537 -> [Configure] Info: co2CalibrationRequested: True
13:23:32:538 -> [Configure] Info: Detected new firmware version: 3.1.9
13:23:32:538 -> state: 12
13:23:32:538 -> [StateMachine] Info: CO2 Calibration
13:23:32:538 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:23:33:538 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:23:34:538 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:23:35:538 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:23:36:538 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:23:39:546 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:23:39:559 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:23:39:568 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:23:39:582 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:23:39:583 -> [StateMachine] Info: CO2 Calibration: success
13:23:40:583 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:23:40:591 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:23:40:603 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:23:40:603 -> Flags: 0
13:23:41:612 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:23:41:624 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:23:41:624 -> Flags: 0
13:23:42:633 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:23:42:645 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:23:42:645 -> Flags: 0
13:23:43:654 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:23:43:666 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:23:43:667 -> Flags: 0
13:23:44:675 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:23:44:687 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:23:44:688 -> Flags: 0
13:23:45:687 -> Calibration Timeout
13:23:45:687 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:23:48:275 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:23:48:275 -> [ApiClient] Info: Return code: 200
13:23:48:276 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:23:48:278 -> [Configure] Info: Parse configure success
13:23:48:278 -> [Configure] Info: Detected new firmware version: 3.1.9
13:23:48:280 -> state: 12
13:23:49:241 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:23:49:241 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":402,"boot":83,"bootCount":83}
13:23:49:241 -> [ApiClient] Info: Return code: 200
13:23:49:242 -> 
13:23:49:243 -> Online mode and isPostToAirGradient = true: watchdog reset
13:23:49:243 -> 
13:23:49:264 -> CO2 (ppm): 402
13:23:49:288 -> External watchdog feed!
13:23:57:306 -> CO2 (ppm): 401
13:23:57:306 -> CO2 (ppm): 401
13:24:01:327 -> CO2 (ppm): 401
13:24:05:348 -> CO2 (ppm): 402
13:24:09:367 -> CO2 (ppm): 402
13:24:13:388 -> CO2 (ppm): 402
13:24:17:408 -> CO2 (ppm): 402
13:24:21:429 -> CO2 (ppm): 402
13:24:25:450 -> CO2 (ppm): 402
13:24:29:471 -> CO2 (ppm): 402
13:24:33:491 -> CO2 (ppm): 402
13:24:37:511 -> CO2 (ppm): 402
13:24:41:532 -> CO2 (ppm): 402
13:24:45:552 -> CO2 (ppm): 402
13:24:47:708 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:24:47:708 -> [Configure] Info: Parse configure success
13:24:47:708 -> [Configure] Info: co2CalibrationRequested: True
13:24:47:709 -> [Configure] Info: Detected new firmware version: 3.1.9
13:24:47:709 -> state: 12
13:24:47:709 -> [StateMachine] Info: CO2 Calibration
13:24:47:710 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:24:48:709 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:24:49:709 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:24:50:709 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:24:51:709 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:24:54:717 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:24:54:731 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:24:54:740 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:24:54:754 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:24:54:755 -> [StateMachine] Info: CO2 Calibration: success
13:24:55:755 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:24:55:763 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:24:55:775 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:24:55:776 -> Flags: 20
13:24:55:776 -> Success calibration!
13:24:55:776 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:24:58:421 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:24:58:421 -> [ApiClient] Info: Return code: 200
13:24:58:422 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:24:58:424 -> [Configure] Info: Parse configure success
13:24:58:425 -> [Configure] Info: Detected new firmware version: 3.1.9
13:24:58:426 -> state: 12
13:24:59:365 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:24:59:365 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":402,"boot":84,"bootCount":84}
13:24:59:365 -> [ApiClient] Info: Return code: 200
13:24:59:367 -> 
13:24:59:367 -> Online mode and isPostToAirGradient = true: watchdog reset
13:24:59:367 -> 
13:24:59:389 -> CO2 (ppm): 400
13:24:59:413 -> External watchdog feed!
13:25:03:408 -> CO2 (ppm): 400
13:25:07:428 -> CO2 (ppm): 400
13:25:11:449 -> CO2 (ppm): 400
13:25:15:470 -> CO2 (ppm): 400
13:25:19:491 -> CO2 (ppm): 400
13:25:23:511 -> CO2 (ppm): 400
13:25:27:531 -> CO2 (ppm): 400
13:25:31:551 -> CO2 (ppm): 400
13:25:35:571 -> CO2 (ppm): 400
13:25:39:591 -> CO2 (ppm): 400
13:25:43:612 -> CO2 (ppm): 400
13:25:47:633 -> CO2 (ppm): 400
13:25:51:653 -> CO2 (ppm): 399
13:25:55:673 -> CO2 (ppm): 399
13:25:57:795 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:25:57:796 -> [Configure] Info: Parse configure success
13:25:57:796 -> [Configure] Info: co2CalibrationRequested: True
13:25:57:797 -> [Configure] Info: Detected new firmware version: 3.1.9
13:25:57:797 -> state: 12
13:25:57:797 -> [StateMachine] Info: CO2 Calibration
13:25:57:797 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:25:58:797 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:25:59:797 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:26:00:797 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:26:01:797 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:26:04:805 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:26:04:818 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:26:04:827 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:26:04:840 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:26:04:841 -> [StateMachine] Info: CO2 Calibration: success
13:26:05:841 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:26:05:849 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:26:05:861 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:26:05:862 -> Flags: 20
13:26:05:862 -> Success calibration!
13:26:05:862 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:26:08:462 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:26:08:462 -> [ApiClient] Info: Return code: 200
13:26:08:463 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:26:08:465 -> [Configure] Info: Parse configure success
13:26:08:466 -> [Configure] Info: Detected new firmware version: 3.1.9
13:26:08:467 -> state: 12
13:26:09:416 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:26:09:416 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":399,"boot":85,"bootCount":85}
13:26:09:417 -> [ApiClient] Info: Return code: 200
13:26:09:418 -> 
13:26:09:418 -> Online mode and isPostToAirGradient = true: watchdog reset
13:26:09:418 -> 
13:26:09:439 -> CO2 (ppm): 402
13:26:09:464 -> External watchdog feed!
13:26:13:459 -> CO2 (ppm): 402
13:26:21:501 -> CO2 (ppm): 402
13:26:21:501 -> CO2 (ppm): 402
13:26:25:521 -> CO2 (ppm): 402
13:26:29:541 -> CO2 (ppm): 402
13:26:33:561 -> CO2 (ppm): 401
13:26:37:581 -> CO2 (ppm): 401
13:26:41:602 -> CO2 (ppm): 401
13:26:45:622 -> CO2 (ppm): 401
13:26:49:643 -> CO2 (ppm): 401
13:26:53:663 -> CO2 (ppm): 401
13:26:57:683 -> CO2 (ppm): 401
13:27:01:703 -> CO2 (ppm): 401
13:27:05:723 -> CO2 (ppm): 401
13:27:07:881 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:27:07:882 -> [Configure] Info: Parse configure success
13:27:07:882 -> [Configure] Info: co2CalibrationRequested: True
13:27:07:883 -> [Configure] Info: Detected new firmware version: 3.1.9
13:27:07:883 -> state: 12
13:27:07:883 -> [StateMachine] Info: CO2 Calibration
13:27:07:883 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:27:08:883 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:27:09:883 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:27:10:883 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:27:11:883 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:27:14:891 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:27:14:906 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:27:14:914 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:27:14:927 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:27:14:928 -> [StateMachine] Info: CO2 Calibration: success
13:27:15:928 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:27:15:936 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:27:15:948 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:27:15:949 -> Flags: 20
13:27:15:949 -> Success calibration!
13:27:15:949 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:27:18:604 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:27:18:604 -> [ApiClient] Info: Return code: 200
13:27:18:605 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:27:18:607 -> [Configure] Info: Parse configure success
13:27:18:608 -> [Configure] Info: Detected new firmware version: 3.1.9
13:27:18:609 -> state: 12
13:27:19:549 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:27:19:549 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":401,"boot":86,"bootCount":86}
13:27:19:550 -> [ApiClient] Info: Return code: 200
13:27:19:572 -> 
13:27:19:572 -> Online mode and isPostToAirGradient = true: watchdog reset
13:27:19:572 -> 
13:27:19:572 -> CO2 (ppm): 400
13:27:19:597 -> External watchdog feed!
13:27:23:593 -> CO2 (ppm): 400
13:27:27:613 -> CO2 (ppm): 400
13:27:31:634 -> CO2 (ppm): 400
13:27:35:653 -> CO2 (ppm): 400
13:27:39:674 -> CO2 (ppm): 400
13:27:43:695 -> CO2 (ppm): 400
13:27:47:716 -> CO2 (ppm): 400
13:27:51:737 -> CO2 (ppm): 400
13:27:55:757 -> CO2 (ppm): 400
13:27:59:778 -> CO2 (ppm): 400
13:28:03:798 -> CO2 (ppm): 400
13:28:07:819 -> CO2 (ppm): 400
13:28:11:840 -> CO2 (ppm): 400
13:28:15:860 -> CO2 (ppm): 400
13:28:17:969 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:28:17:970 -> [Configure] Info: Parse configure success
13:28:17:970 -> [Configure] Info: co2CalibrationRequested: True
13:28:17:971 -> [Configure] Info: Detected new firmware version: 3.1.9
13:28:17:971 -> state: 12
13:28:17:971 -> [StateMachine] Info: CO2 Calibration
13:28:17:971 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:28:18:971 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:28:19:972 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:28:20:972 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:28:21:972 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:28:24:980 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:28:24:993 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:28:25:002 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:28:25:016 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:28:25:017 -> [StateMachine] Info: CO2 Calibration: success
13:28:26:016 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:28:26:025 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:28:26:037 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:28:26:037 -> Flags: 20
13:28:26:037 -> Success calibration!
13:28:26:037 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:28:28:647 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:28:28:647 -> [ApiClient] Info: Return code: 200
13:28:28:648 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:28:28:649 -> [Configure] Info: Parse configure success
13:28:28:650 -> [Configure] Info: Detected new firmware version: 3.1.9
13:28:28:652 -> state: 12
13:28:29:870 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:28:29:870 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":400,"boot":87,"bootCount":87}
13:28:29:870 -> [ApiClient] Info: Return code: 200
13:28:29:871 -> 
13:28:29:871 -> Online mode and isPostToAirGradient = true: watchdog reset
13:28:29:871 -> 
13:28:29:892 -> CO2 (ppm): 401
13:28:29:917 -> External watchdog feed!
13:28:33:913 -> CO2 (ppm): 401
13:28:37:933 -> CO2 (ppm): 401
13:28:45:973 -> CO2 (ppm): 401
13:28:45:973 -> CO2 (ppm): 401
13:28:49:993 -> CO2 (ppm): 401
13:28:54:013 -> CO2 (ppm): 401
13:28:58:033 -> CO2 (ppm): 401
13:29:02:054 -> CO2 (ppm): 401
13:29:06:075 -> CO2 (ppm): 401
13:29:10:095 -> CO2 (ppm): 401
13:29:18:137 -> CO2 (ppm): 401
13:29:18:137 -> CO2 (ppm): 402
13:29:22:158 -> CO2 (ppm): 402
13:29:26:178 -> CO2 (ppm): 402
13:29:28:058 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:29:28:059 -> [Configure] Info: Parse configure success
13:29:28:059 -> [Configure] Info: co2CalibrationRequested: True
13:29:28:059 -> [Configure] Info: Detected new firmware version: 3.1.9
13:29:28:059 -> state: 12
13:29:28:059 -> [StateMachine] Info: CO2 Calibration
13:29:28:059 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:29:29:059 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:29:30:059 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:29:31:059 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:29:32:058 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:29:35:067 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:29:35:080 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:29:35:089 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:29:35:103 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:29:35:104 -> [StateMachine] Info: CO2 Calibration: success
13:29:36:103 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:29:36:112 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:29:36:124 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:29:36:125 -> Flags: 20
13:29:36:125 -> Success calibration!
13:29:36:125 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:29:38:789 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:29:38:789 -> [ApiClient] Info: Return code: 200
13:29:38:791 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:29:38:793 -> [Configure] Info: Parse configure success
13:29:38:793 -> [Configure] Info: Detected new firmware version: 3.1.9
13:29:38:795 -> state: 12
13:29:39:725 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:29:39:726 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":402,"boot":88,"bootCount":88}
13:29:39:726 -> [ApiClient] Info: Return code: 200
13:29:39:726 -> 
13:29:39:727 -> Online mode and isPostToAirGradient = true: watchdog reset
13:29:39:727 -> 
13:29:39:801 -> CO2 (ppm): 400
13:29:39:826 -> External watchdog feed!
13:29:43:828 -> CO2 (ppm): 400
13:29:47:842 -> CO2 (ppm): 436
13:29:51:863 -> CO2 (ppm): 441
13:29:55:884 -> CO2 (ppm): 440
13:29:59:904 -> CO2 (ppm): 438
13:30:07:944 -> CO2 (ppm): 440
13:30:07:944 -> CO2 (ppm): 439
13:30:11:964 -> CO2 (ppm): 435
13:30:15:984 -> CO2 (ppm): 436
13:30:20:005 -> CO2 (ppm): 441
13:30:24:026 -> CO2 (ppm): 441
13:30:28:047 -> CO2 (ppm): 438
13:30:32:067 -> CO2 (ppm): 434
13:30:36:088 -> CO2 (ppm): 429
13:30:38:144 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:30:38:145 -> [Configure] Info: Parse configure success
13:30:38:145 -> [Configure] Info: co2CalibrationRequested: True
13:30:38:145 -> [Configure] Info: Detected new firmware version: 3.1.9
13:30:38:146 -> state: 12
13:30:38:146 -> [StateMachine] Info: CO2 Calibration
13:30:38:146 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:30:39:145 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:30:40:145 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:30:41:145 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:30:42:145 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:30:45:153 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:30:45:167 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:30:45:175 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:30:45:190 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:30:45:190 -> [StateMachine] Info: CO2 Calibration: success
13:30:46:190 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:30:46:198 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:30:46:211 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:30:46:211 -> Flags: 0
13:30:47:219 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:30:47:232 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:30:47:232 -> Flags: 0
13:30:48:240 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:30:48:253 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:30:48:253 -> Flags: 0
13:30:49:261 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:30:49:274 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:30:49:274 -> Flags: 0
13:30:50:283 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:30:50:295 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:30:50:296 -> Flags: 0
13:30:51:295 -> Calibration Timeout
13:30:51:296 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:30:53:951 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:30:53:951 -> [ApiClient] Info: Return code: 200
13:30:53:952 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:30:53:954 -> [Configure] Info: Parse configure success
13:30:53:954 -> [Configure] Info: Detected new firmware version: 3.1.9
13:30:53:956 -> state: 12
13:30:54:895 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:30:54:895 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":429,"boot":89,"bootCount":89}
13:30:54:895 -> [ApiClient] Info: Return code: 200
13:30:54:896 -> 
13:30:54:896 -> Online mode and isPostToAirGradient = true: watchdog reset
13:30:54:897 -> 
13:30:54:918 -> CO2 (ppm): 414
13:30:54:943 -> External watchdog feed!
13:30:58:939 -> CO2 (ppm): 409
13:31:02:960 -> CO2 (ppm): 407
13:31:06:981 -> CO2 (ppm): 405
13:31:11:001 -> CO2 (ppm): 403
13:31:15:022 -> CO2 (ppm): 401
13:31:19:042 -> CO2 (ppm): 400
13:31:23:063 -> CO2 (ppm): 399
13:31:27:084 -> CO2 (ppm): 399
13:31:31:104 -> CO2 (ppm): 398
13:31:35:125 -> CO2 (ppm): 398
13:31:39:145 -> CO2 (ppm): 397
13:31:43:166 -> CO2 (ppm): 398
13:31:47:187 -> CO2 (ppm): 400
13:31:51:207 -> CO2 (ppm): 402
13:31:53:320 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:31:53:321 -> [Configure] Info: Parse configure success
13:31:53:321 -> [Configure] Info: co2CalibrationRequested: True
13:31:53:321 -> [Configure] Info: Detected new firmware version: 3.1.9
13:31:53:321 -> state: 12
13:31:53:321 -> [StateMachine] Info: CO2 Calibration
13:31:53:321 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:31:54:316 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:31:55:316 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:31:56:316 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:31:57:316 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:32:00:324 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:32:00:338 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:32:00:347 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:32:00:361 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:32:00:362 -> [StateMachine] Info: CO2 Calibration: success
13:32:01:361 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:32:01:370 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:32:01:382 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:32:01:383 -> Flags: 0
13:32:02:391 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:32:02:403 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:32:02:404 -> Flags: 0
13:32:03:411 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:32:03:424 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:32:03:425 -> Flags: 0
13:32:04:432 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:32:04:445 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:32:04:445 -> Flags: 0
13:32:05:453 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:32:05:466 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:32:05:466 -> Flags: 0
13:32:06:466 -> Calibration Timeout
13:32:06:466 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:32:09:112 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:32:09:112 -> [ApiClient] Info: Return code: 200
13:32:09:114 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:32:09:115 -> [Configure] Info: Parse configure success
13:32:09:117 -> [Configure] Info: Detected new firmware version: 3.1.9
13:32:09:117 -> state: 12
13:32:10:141 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:32:10:141 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":402,"boot":90,"bootCount":90}
13:32:10:141 -> [ApiClient] Info: Return code: 200
13:32:10:143 -> 
13:32:10:143 -> Online mode and isPostToAirGradient = true: watchdog reset
13:32:10:143 -> 
13:32:10:164 -> CO2 (ppm): 400
13:32:10:189 -> External watchdog feed!
13:32:14:185 -> CO2 (ppm): 401
13:32:18:206 -> CO2 (ppm): 401
13:32:22:226 -> CO2 (ppm): 401
13:32:26:246 -> CO2 (ppm): 401
13:32:30:266 -> CO2 (ppm): 401
13:32:34:286 -> CO2 (ppm): 401
13:32:38:306 -> CO2 (ppm): 401
13:32:42:326 -> CO2 (ppm): 401
13:32:46:347 -> CO2 (ppm): 400
13:32:50:369 -> CO2 (ppm): 401
13:32:54:390 -> CO2 (ppm): 405
13:32:58:409 -> CO2 (ppm): 410
13:33:02:430 -> CO2 (ppm): 413
13:33:06:451 -> CO2 (ppm): 413
13:33:08:486 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:33:08:487 -> [Configure] Info: Parse configure success
13:33:08:487 -> [Configure] Info: co2CalibrationRequested: True
13:33:08:488 -> [Configure] Info: Detected new firmware version: 3.1.9
13:33:08:489 -> state: 12
13:33:08:489 -> [StateMachine] Info: CO2 Calibration
13:33:08:489 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:33:10:487 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:33:10:487 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:33:11:488 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:33:12:487 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:33:15:495 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:33:15:511 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:33:15:518 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:33:15:532 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:33:15:533 -> [StateMachine] Info: CO2 Calibration: success
13:33:16:532 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:33:16:541 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:33:16:553 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:33:16:554 -> Flags: 0
13:33:17:561 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:33:17:574 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:33:17:575 -> Flags: 0
13:33:18:583 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:33:18:595 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:33:18:596 -> Flags: 0
13:33:19:604 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:33:19:616 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:33:19:617 -> Flags: 0
13:33:20:625 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:33:20:637 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:33:20:638 -> Flags: 0
13:33:21:637 -> Calibration Timeout
13:33:21:639 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:33:24:274 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:33:24:274 -> [ApiClient] Info: Return code: 200
13:33:24:276 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:33:24:277 -> [Configure] Info: Parse configure success
13:33:24:277 -> [Configure] Info: Detected new firmware version: 3.1.9
13:33:24:279 -> state: 12
13:33:25:231 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:33:25:232 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":413,"boot":91,"bootCount":91}
13:33:25:232 -> [ApiClient] Info: Return code: 200
13:33:25:232 -> 
13:33:25:232 -> Online mode and isPostToAirGradient = true: watchdog reset
13:33:25:232 -> 
13:33:25:254 -> CO2 (ppm): 408
13:33:25:279 -> External watchdog feed!
13:33:29:275 -> CO2 (ppm): 406
13:33:33:295 -> CO2 (ppm): 405
13:33:37:316 -> CO2 (ppm): 404
13:33:41:336 -> CO2 (ppm): 403
13:33:45:356 -> CO2 (ppm): 402
13:33:49:377 -> CO2 (ppm): 412
13:33:53:398 -> CO2 (ppm): 439
13:33:57:418 -> CO2 (ppm): 451
13:34:05:458 -> CO2 (ppm): 456
13:34:05:458 -> CO2 (ppm): 455
13:34:09:478 -> CO2 (ppm): 451
13:34:13:497 -> CO2 (ppm): 446
13:34:17:517 -> CO2 (ppm): 440
13:34:21:537 -> CO2 (ppm): 434
13:34:23:657 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:34:23:658 -> [Configure] Info: Parse configure success
13:34:23:658 -> [Configure] Info: co2CalibrationRequested: True
13:34:23:659 -> [Configure] Info: Detected new firmware version: 3.1.9
13:34:23:659 -> state: 12
13:34:23:659 -> [StateMachine] Info: CO2 Calibration
13:34:23:660 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:34:24:659 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:34:25:659 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:34:26:659 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:34:27:659 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:34:30:667 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:34:30:681 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:34:30:690 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:34:30:703 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:34:30:704 -> [StateMachine] Info: CO2 Calibration: success
13:34:31:703 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:34:31:712 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:34:31:725 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:34:31:725 -> Flags: 0
13:34:32:734 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:34:32:746 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:34:32:747 -> Flags: 0
13:34:33:754 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:34:33:767 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:34:33:768 -> Flags: 0
13:34:34:775 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:34:34:788 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:34:34:789 -> Flags: 0
13:34:35:797 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:34:35:809 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:34:35:810 -> Flags: 0
13:34:36:809 -> Calibration Timeout
13:34:36:811 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:34:39:434 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:34:39:434 -> [ApiClient] Info: Return code: 200
13:34:39:436 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:34:39:437 -> [Configure] Info: Parse configure success
13:34:39:438 -> [Configure] Info: Detected new firmware version: 3.1.9
13:34:39:440 -> state: 12
13:34:40:370 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:34:40:370 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":434,"boot":92,"bootCount":92}
13:34:40:370 -> [ApiClient] Info: Return code: 200
13:34:40:371 -> 
13:34:40:371 -> Online mode and isPostToAirGradient = true: watchdog reset
13:34:40:371 -> 
13:34:40:393 -> CO2 (ppm): 415
13:34:40:418 -> External watchdog feed!
13:34:44:414 -> CO2 (ppm): 412
13:34:48:437 -> CO2 (ppm): 410
13:34:52:456 -> CO2 (ppm): 408
13:34:56:477 -> CO2 (ppm): 407
13:35:00:498 -> CO2 (ppm): 406
13:35:04:519 -> CO2 (ppm): 404
13:35:08:538 -> CO2 (ppm): 405
13:35:12:560 -> CO2 (ppm): 405
13:35:16:579 -> CO2 (ppm): 406
13:35:20:601 -> CO2 (ppm): 405
13:35:24:622 -> CO2 (ppm): 405
13:35:32:664 -> CO2 (ppm): 405
13:35:32:664 -> CO2 (ppm): 404
13:35:36:681 -> CO2 (ppm): 403
13:35:38:830 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:35:38:831 -> [Configure] Info: Parse configure success
13:35:38:831 -> [Configure] Info: co2CalibrationRequested: True
13:35:38:831 -> [Configure] Info: Detected new firmware version: 3.1.9
13:35:38:832 -> state: 12
13:35:38:832 -> [StateMachine] Info: CO2 Calibration
13:35:38:832 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:35:39:831 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:35:40:831 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:35:41:831 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:35:45:840 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:35:45:840 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:35:45:853 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:35:45:862 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:35:45:876 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:35:45:877 -> [StateMachine] Info: CO2 Calibration: success
13:35:46:876 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:35:46:885 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:35:46:898 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:35:46:899 -> Flags: 0
13:35:47:905 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:35:47:918 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:35:47:919 -> Flags: 0
13:35:48:926 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:35:48:939 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:35:48:939 -> Flags: 0
13:35:49:947 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:35:49:960 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:35:49:960 -> Flags: 0
13:35:50:968 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:35:50:981 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:35:50:982 -> Flags: 0
13:35:51:981 -> Calibration Timeout
13:35:51:982 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:35:54:596 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:35:54:597 -> [ApiClient] Info: Return code: 200
13:35:54:598 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:35:54:599 -> [Configure] Info: Parse configure success
13:35:54:600 -> [Configure] Info: Detected new firmware version: 3.1.9
13:35:54:601 -> state: 12
13:35:55:522 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:35:55:522 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":403,"boot":93,"bootCount":93}
13:35:55:522 -> [ApiClient] Info: Return code: 200
13:35:55:523 -> 
13:35:55:523 -> Online mode and isPostToAirGradient = true: watchdog reset
13:35:55:523 -> 
13:35:55:545 -> CO2 (ppm): 400
13:35:55:570 -> External watchdog feed!
13:35:59:565 -> CO2 (ppm): 401
13:36:03:585 -> CO2 (ppm): 401
13:36:07:605 -> CO2 (ppm): 401
13:36:11:626 -> CO2 (ppm): 401
13:36:15:645 -> CO2 (ppm): 400
13:36:19:666 -> CO2 (ppm): 401
13:36:23:687 -> CO2 (ppm): 401
13:36:27:708 -> CO2 (ppm): 401
13:36:31:729 -> CO2 (ppm): 400
13:36:35:750 -> CO2 (ppm): 400
13:36:43:792 -> CO2 (ppm): 400
13:36:43:792 -> CO2 (ppm): 400
13:36:47:812 -> CO2 (ppm): 401
13:36:51:832 -> CO2 (ppm): 401
13:36:54:001 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:36:54:003 -> [Configure] Info: Parse configure success
13:36:54:003 -> [Configure] Info: co2CalibrationRequested: True
13:36:54:003 -> [Configure] Info: Detected new firmware version: 3.1.9
13:36:54:003 -> state: 12
13:36:54:003 -> [StateMachine] Info: CO2 Calibration
13:36:54:003 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:36:55:002 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:36:56:002 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:36:57:002 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:36:58:002 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:37:01:010 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:37:01:024 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:37:01:032 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:37:01:047 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:37:01:048 -> [StateMachine] Info: CO2 Calibration: success
13:37:02:047 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:37:02:055 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:37:02:068 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:37:02:069 -> Flags: 20
13:37:02:069 -> Success calibration!
13:37:02:069 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:37:04:637 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:37:04:637 -> [ApiClient] Info: Return code: 200
13:37:04:639 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:37:04:640 -> [Configure] Info: Parse configure success
13:37:04:641 -> [Configure] Info: Detected new firmware version: 3.1.9
13:37:04:642 -> state: 12
13:37:05:580 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:37:05:580 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":401,"boot":94,"bootCount":94}
13:37:05:580 -> [ApiClient] Info: Return code: 200
13:37:05:580 -> 
13:37:05:580 -> Online mode and isPostToAirGradient = true: watchdog reset
13:37:05:580 -> 
13:37:05:595 -> CO2 (ppm): 400
13:37:05:620 -> External watchdog feed!
13:37:09:615 -> CO2 (ppm): 400
13:37:13:636 -> CO2 (ppm): 400
13:37:17:657 -> CO2 (ppm): 400
13:37:21:678 -> CO2 (ppm): 400
13:37:25:699 -> CO2 (ppm): 400
13:37:29:720 -> CO2 (ppm): 400
13:37:33:741 -> CO2 (ppm): 400
13:37:37:761 -> CO2 (ppm): 400
13:37:41:782 -> CO2 (ppm): 400
13:37:49:823 -> CO2 (ppm): 400
13:37:49:823 -> CO2 (ppm): 400
13:37:53:844 -> CO2 (ppm): 399
13:37:57:864 -> CO2 (ppm): 399
13:38:01:885 -> CO2 (ppm): 399
13:38:04:095 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:38:04:096 -> [Configure] Info: Parse configure success
13:38:04:096 -> [Configure] Info: co2CalibrationRequested: True
13:38:04:096 -> [Configure] Info: Detected new firmware version: 3.1.9
13:38:04:096 -> state: 12
13:38:04:096 -> [StateMachine] Info: CO2 Calibration
13:38:04:096 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:38:05:089 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:38:06:089 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:38:07:089 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:38:08:089 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:38:11:097 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:38:11:111 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:38:11:119 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:38:11:134 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:38:11:135 -> [StateMachine] Info: CO2 Calibration: success
13:38:12:134 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:38:12:142 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:38:12:155 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:38:12:156 -> Flags: 20
13:38:12:156 -> Success calibration!
13:38:12:156 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:38:14:780 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:38:14:780 -> [ApiClient] Info: Return code: 200
13:38:14:782 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:38:14:784 -> [Configure] Info: Parse configure success
13:38:14:784 -> [Configure] Info: Detected new firmware version: 3.1.9
13:38:14:786 -> state: 12
13:38:15:717 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:38:15:717 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":399,"boot":95,"bootCount":95}
13:38:15:717 -> [ApiClient] Info: Return code: 200
13:38:15:718 -> 
13:38:15:718 -> Online mode and isPostToAirGradient = true: watchdog reset
13:38:15:718 -> 
13:38:15:740 -> CO2 (ppm): 400
13:38:15:765 -> External watchdog feed!
13:38:19:761 -> CO2 (ppm): 400
13:38:23:781 -> CO2 (ppm): 431
13:38:27:801 -> CO2 (ppm): 473
13:38:35:841 -> CO2 (ppm): 532
13:38:35:841 -> CO2 (ppm): 584
13:38:39:861 -> CO2 (ppm): 624
13:38:43:882 -> CO2 (ppm): 637
13:38:47:902 -> CO2 (ppm): 633
13:38:51:922 -> CO2 (ppm): 618
13:38:55:943 -> CO2 (ppm): 598
13:38:59:964 -> CO2 (ppm): 660
13:39:03:984 -> CO2 (ppm): 738
13:39:08:005 -> CO2 (ppm): 820
13:39:12:026 -> CO2 (ppm): 899
13:39:14:176 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:39:14:177 -> [Configure] Info: Parse configure success
13:39:14:178 -> [Configure] Info: co2CalibrationRequested: True
13:39:14:178 -> [Configure] Info: Detected new firmware version: 3.1.9
13:39:14:179 -> state: 12
13:39:14:179 -> [StateMachine] Info: CO2 Calibration
13:39:14:179 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:39:15:178 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:39:16:178 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:39:17:178 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:39:18:178 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:39:21:186 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:39:21:201 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:39:21:209 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:39:21:223 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:39:21:223 -> [StateMachine] Info: CO2 Calibration: success
13:39:22:223 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:39:22:231 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:39:22:245 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:39:22:246 -> Flags: 0
13:39:23:254 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:39:23:266 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:39:23:267 -> Flags: 0
13:39:24:274 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:39:24:287 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:39:24:287 -> Flags: 0
13:39:25:295 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:39:25:308 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:39:25:308 -> Flags: 0
13:39:26:316 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:39:26:329 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:39:26:329 -> Flags: 0
13:39:27:329 -> Calibration Timeout
13:39:27:330 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:39:29:942 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:39:29:942 -> [ApiClient] Info: Return code: 200
13:39:29:944 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:39:29:946 -> [Configure] Info: Parse configure success
13:39:29:946 -> [Configure] Info: Detected new firmware version: 3.1.9
13:39:29:947 -> state: 12
13:39:30:878 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:39:30:878 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":899,"boot":96,"bootCount":96}
13:39:30:878 -> [ApiClient] Info: Return code: 200
13:39:30:879 -> 
13:39:30:879 -> Online mode and isPostToAirGradient = true: watchdog reset
13:39:30:879 -> 
13:39:30:900 -> CO2 (ppm): 1235
13:39:30:925 -> External watchdog feed!
13:39:34:920 -> CO2 (ppm): 1255
13:39:38:941 -> CO2 (ppm): 1231
13:39:42:961 -> CO2 (ppm): 1166
13:39:46:983 -> CO2 (ppm): 1089
13:39:51:003 -> CO2 (ppm): 1009
13:39:55:025 -> CO2 (ppm): 936
13:39:59:044 -> CO2 (ppm): 877
13:40:03:064 -> CO2 (ppm): 817
13:40:07:084 -> CO2 (ppm): 758
13:40:11:105 -> CO2 (ppm): 704
13:40:15:126 -> CO2 (ppm): 657
13:40:19:165 -> CO2 (ppm): 615
13:40:23:168 -> CO2 (ppm): 578
13:40:27:188 -> CO2 (ppm): 548
13:40:29:349 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:40:29:350 -> [Configure] Info: Parse configure success
13:40:29:350 -> [Configure] Info: co2CalibrationRequested: True
13:40:29:351 -> [Configure] Info: Detected new firmware version: 3.1.9
13:40:29:351 -> state: 12
13:40:29:351 -> [StateMachine] Info: CO2 Calibration
13:40:29:351 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:40:30:350 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:40:31:350 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:40:32:350 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:40:33:350 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:40:36:358 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:40:36:372 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:40:36:381 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:40:36:394 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:40:36:395 -> [StateMachine] Info: CO2 Calibration: success
13:40:37:394 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:40:37:402 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:40:37:415 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:40:37:415 -> Flags: 0
13:40:38:423 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:40:38:436 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:40:38:436 -> Flags: 0
13:40:39:444 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:40:39:456 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:40:39:457 -> Flags: 0
13:40:40:465 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:40:40:478 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:40:40:478 -> Flags: 0
13:40:41:486 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:40:41:498 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:40:41:499 -> Flags: 0
13:40:42:499 -> Calibration Timeout
13:40:42:499 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:40:45:104 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:40:45:105 -> [ApiClient] Info: Return code: 200
13:40:45:106 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:40:45:107 -> [Configure] Info: Parse configure success
13:40:45:108 -> [Configure] Info: Detected new firmware version: 3.1.9
13:40:45:109 -> state: 12
13:40:46:059 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:40:46:060 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":548,"boot":97,"bootCount":97}
13:40:46:060 -> [ApiClient] Info: Return code: 200
13:40:46:061 -> 
13:40:46:061 -> Online mode and isPostToAirGradient = true: watchdog reset
13:40:46:061 -> 
13:40:46:081 -> CO2 (ppm): 455
13:40:46:107 -> External watchdog feed!
13:40:50:102 -> CO2 (ppm): 445
13:40:54:121 -> CO2 (ppm): 437
13:40:58:142 -> CO2 (ppm): 430
13:41:02:162 -> CO2 (ppm): 423
13:41:06:189 -> CO2 (ppm): 420
13:41:10:203 -> CO2 (ppm): 416
13:41:14:224 -> CO2 (ppm): 413
13:41:18:244 -> CO2 (ppm): 411
13:41:22:264 -> CO2 (ppm): 408
13:41:26:284 -> CO2 (ppm): 407
13:41:30:305 -> CO2 (ppm): 406
13:41:34:326 -> CO2 (ppm): 405
13:41:38:346 -> CO2 (ppm): 405
13:41:42:366 -> CO2 (ppm): 404
13:41:44:518 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:41:44:519 -> [Configure] Info: Parse configure success
13:41:44:520 -> [Configure] Info: co2CalibrationRequested: True
13:41:44:520 -> [Configure] Info: Detected new firmware version: 3.1.9
13:41:44:521 -> state: 12
13:41:44:521 -> [StateMachine] Info: CO2 Calibration
13:41:44:521 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:41:45:520 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:41:46:520 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:41:47:520 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:41:48:520 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:41:51:528 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:41:51:542 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:41:51:550 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:41:51:564 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:41:51:565 -> [StateMachine] Info: CO2 Calibration: success
13:41:52:573 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:41:52:573 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:41:52:585 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:41:52:586 -> Flags: 0
13:41:53:594 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:41:53:606 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:41:53:607 -> Flags: 0
13:41:54:615 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:41:54:627 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:41:54:628 -> Flags: 0
13:41:55:636 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:41:55:649 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:41:55:649 -> Flags: 0
13:41:56:657 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:41:56:669 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:41:56:670 -> Flags: 0
13:41:57:669 -> Calibration Timeout
13:41:57:670 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:42:00:267 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:42:00:267 -> [ApiClient] Info: Return code: 200
13:42:00:268 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:42:00:270 -> [Configure] Info: Parse configure success
13:42:00:271 -> [Configure] Info: Detected new firmware version: 3.1.9
13:42:00:272 -> state: 12
13:42:01:211 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:42:01:211 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":404,"boot":98,"bootCount":98}
13:42:01:212 -> [ApiClient] Info: Return code: 200
13:42:01:212 -> 
13:42:01:213 -> Online mode and isPostToAirGradient = true: watchdog reset
13:42:01:213 -> 
13:42:01:233 -> CO2 (ppm): 402
13:42:01:258 -> External watchdog feed!
13:42:09:275 -> CO2 (ppm): 401
13:42:09:275 -> CO2 (ppm): 401
13:42:13:294 -> CO2 (ppm): 400
13:42:17:314 -> CO2 (ppm): 399
13:42:21:335 -> CO2 (ppm): 399
13:42:23:606 -> 
13:42:23:607 -> firmwareCheckForUpdate:
13:42:23:607 -> firmwareCheckForUpdate: Perform
13:42:23:607 -> checking for new OTA update @ http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/generic/os/firmware.bin?current_firmware=3.1.9-1-g4691500-dirty
13:42:24:241 -> Firmware update skipped, the server returned 400
13:42:24:242 -> 3
13:42:24:242 -> OTA message: 
13:42:24:242 -> 
13:42:25:355 -> CO2 (ppm): 399
13:42:29:376 -> CO2 (ppm): 399
13:42:33:397 -> CO2 (ppm): 399
13:42:37:417 -> CO2 (ppm): 399
13:42:41:438 -> CO2 (ppm): 399
13:42:45:458 -> CO2 (ppm): 399
13:42:49:479 -> CO2 (ppm): 399
13:42:53:499 -> CO2 (ppm): 399
13:42:57:570 -> CO2 (ppm): 399
13:42:59:689 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:42:59:690 -> [Configure] Info: Parse configure success
13:42:59:691 -> [Configure] Info: co2CalibrationRequested: True
13:42:59:691 -> [Configure] Info: Detected new firmware version: 3.1.9
13:42:59:692 -> state: 12
13:42:59:692 -> [StateMachine] Info: CO2 Calibration
13:42:59:692 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:43:00:691 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:43:01:691 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:43:02:691 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:43:03:691 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:43:06:699 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:43:06:712 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:43:06:721 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:43:06:736 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:43:06:737 -> [StateMachine] Info: CO2 Calibration: success
13:43:07:736 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:43:07:744 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:43:07:756 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:43:07:757 -> Flags: 20
13:43:07:757 -> Success calibration!
13:43:07:757 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:43:10:407 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:43:10:408 -> [ApiClient] Info: Return code: 200
13:43:10:409 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:43:10:410 -> [Configure] Info: Parse configure success
13:43:10:411 -> [Configure] Info: Detected new firmware version: 3.1.9
13:43:10:412 -> state: 12
13:43:11:353 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:43:11:353 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":399,"boot":99,"bootCount":99}
13:43:11:354 -> [ApiClient] Info: Return code: 200
13:43:11:376 -> 
13:43:11:376 -> Online mode and isPostToAirGradient = true: watchdog reset
13:43:11:376 -> 
13:43:11:376 -> CO2 (ppm): 402
13:43:11:401 -> External watchdog feed!
13:43:19:417 -> CO2 (ppm): 402
13:43:19:417 -> CO2 (ppm): 402
13:43:23:437 -> CO2 (ppm): 402
13:43:27:457 -> CO2 (ppm): 401
13:43:31:478 -> CO2 (ppm): 401
13:43:35:498 -> CO2 (ppm): 401
13:43:39:519 -> CO2 (ppm): 401
13:43:43:539 -> CO2 (ppm): 401
13:43:47:560 -> CO2 (ppm): 401
13:43:51:580 -> CO2 (ppm): 402
13:43:55:600 -> CO2 (ppm): 402
13:43:59:621 -> CO2 (ppm): 401
13:44:03:642 -> CO2 (ppm): 401
13:44:07:662 -> CO2 (ppm): 401
13:44:09:776 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:44:09:777 -> [Configure] Info: Parse configure success
13:44:09:777 -> [Configure] Info: co2CalibrationRequested: True
13:44:09:778 -> [Configure] Info: Detected new firmware version: 3.1.9
13:44:09:779 -> state: 12
13:44:09:779 -> [StateMachine] Info: CO2 Calibration
13:44:09:779 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:44:10:778 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:44:12:778 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:44:12:778 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:44:13:778 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:44:16:786 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:44:16:799 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:44:16:808 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:44:16:822 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:44:16:823 -> [StateMachine] Info: CO2 Calibration: success
13:44:17:823 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:44:17:831 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:44:17:844 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:44:17:845 -> Flags: 0
13:44:18:852 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:44:18:864 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:44:18:865 -> Flags: 0
13:44:19:873 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:44:19:885 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:44:19:886 -> Flags: 0
13:44:20:894 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:44:20:906 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:44:20:907 -> Flags: 0
13:44:21:915 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:44:21:927 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:44:21:928 -> Flags: 0
13:44:22:927 -> Calibration Timeout
13:44:22:928 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:44:25:571 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:44:25:571 -> [ApiClient] Info: Return code: 200
13:44:25:572 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:44:25:574 -> [Configure] Info: Parse configure success
13:44:25:574 -> [Configure] Info: Detected new firmware version: 3.1.9
13:44:25:576 -> state: 12
13:44:26:600 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:44:26:601 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":401,"boot":100,"bootCount":100}
13:44:26:601 -> [ApiClient] Info: Return code: 200
13:44:26:601 -> 
13:44:26:602 -> Online mode and isPostToAirGradient = true: watchdog reset
13:44:26:602 -> 
13:44:26:623 -> CO2 (ppm): 636
13:44:26:648 -> External watchdog feed!
13:44:30:644 -> CO2 (ppm): 662
13:44:34:665 -> CO2 (ppm): 665
13:44:38:685 -> CO2 (ppm): 654
13:44:42:705 -> CO2 (ppm): 632
13:44:46:726 -> CO2 (ppm): 608
13:44:50:746 -> CO2 (ppm): 583
13:44:54:767 -> CO2 (ppm): 558
13:44:58:788 -> CO2 (ppm): 535
13:45:02:809 -> CO2 (ppm): 515
13:45:06:828 -> CO2 (ppm): 497
13:45:10:849 -> CO2 (ppm): 481
13:45:14:870 -> CO2 (ppm): 467
13:45:18:889 -> CO2 (ppm): 457
13:45:22:909 -> CO2 (ppm): 447
13:45:24:948 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:45:24:949 -> [Configure] Info: Parse configure success
13:45:24:949 -> [Configure] Info: co2CalibrationRequested: True
13:45:24:950 -> [Configure] Info: Detected new firmware version: 3.1.9
13:45:24:950 -> state: 12
13:45:24:950 -> [StateMachine] Info: CO2 Calibration
13:45:24:950 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:45:25:949 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:45:26:950 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:45:27:949 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:45:28:949 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:45:31:957 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:45:31:971 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:45:31:980 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:45:32:004 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:45:32:005 -> [StateMachine] Info: CO2 Calibration: success
13:45:32:993 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:45:33:001 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:45:33:014 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:45:33:014 -> Flags: 0
13:45:34:023 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:45:34:035 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:45:34:036 -> Flags: 0
13:45:35:044 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:45:35:056 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:45:35:056 -> Flags: 0
13:45:36:064 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:45:36:077 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:45:36:078 -> Flags: 0
13:45:37:085 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:45:37:120 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:45:37:121 -> Flags: 0
13:45:38:120 -> Calibration Timeout
13:45:38:121 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:45:40:734 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:45:40:734 -> [ApiClient] Info: Return code: 200
13:45:40:735 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:45:40:737 -> [Configure] Info: Parse configure success
13:45:40:738 -> [Configure] Info: Detected new firmware version: 3.1.9
13:45:40:739 -> state: 12
13:45:41:695 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:45:41:695 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":447,"boot":101,"bootCount":101}
13:45:41:695 -> [ApiClient] Info: Return code: 200
13:45:41:696 -> 
13:45:41:696 -> Online mode and isPostToAirGradient = true: watchdog reset
13:45:41:696 -> 
13:45:41:718 -> CO2 (ppm): 419
13:45:41:743 -> External watchdog feed!
13:45:45:739 -> CO2 (ppm): 416
13:45:49:760 -> CO2 (ppm): 414
13:45:53:780 -> CO2 (ppm): 412
13:45:57:800 -> CO2 (ppm): 411
13:46:01:821 -> CO2 (ppm): 409
13:46:05:842 -> CO2 (ppm): 407
13:46:09:862 -> CO2 (ppm): 407
13:46:13:883 -> CO2 (ppm): 406
13:46:17:904 -> CO2 (ppm): 406
13:46:21:925 -> CO2 (ppm): 405
13:46:25:946 -> CO2 (ppm): 404
13:46:29:967 -> CO2 (ppm): 403
13:46:33:987 -> CO2 (ppm): 403
13:46:38:008 -> CO2 (ppm): 402
13:46:40:140 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:46:40:141 -> [Configure] Info: Parse configure success
13:46:40:141 -> [Configure] Info: co2CalibrationRequested: True
13:46:40:142 -> [Configure] Info: Detected new firmware version: 3.1.9
13:46:40:142 -> state: 12
13:46:40:142 -> [StateMachine] Info: CO2 Calibration
13:46:40:142 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:46:41:142 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:46:43:141 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:46:43:142 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:46:44:154 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:46:47:150 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:46:47:163 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:46:47:172 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:46:47:186 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:46:47:187 -> [StateMachine] Info: CO2 Calibration: success
13:46:48:186 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:46:48:195 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:46:48:207 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:46:48:208 -> Flags: 0
13:46:49:216 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:46:49:228 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:46:49:229 -> Flags: 0
13:46:50:237 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:46:50:249 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:46:50:250 -> Flags: 0
13:46:51:258 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:46:51:270 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:46:51:271 -> Flags: 0
13:46:52:279 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:46:52:292 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:46:52:292 -> Flags: 0
13:46:53:292 -> Calibration Timeout
13:46:53:293 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:46:55:891 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:46:55:892 -> [ApiClient] Info: Return code: 200
13:46:55:893 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:46:55:895 -> [Configure] Info: Parse configure success
13:46:55:895 -> [Configure] Info: Detected new firmware version: 3.1.9
13:46:55:896 -> state: 12
13:46:56:821 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:46:56:821 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":402,"boot":102,"bootCount":102}
13:46:56:821 -> [ApiClient] Info: Return code: 200
13:46:56:822 -> 
13:46:56:823 -> Online mode and isPostToAirGradient = true: watchdog reset
13:46:56:823 -> 
13:46:56:901 -> CO2 (ppm): 400
13:46:56:926 -> External watchdog feed!
13:47:00:923 -> CO2 (ppm): 402
13:47:04:944 -> CO2 (ppm): 407
13:47:08:964 -> CO2 (ppm): 408
13:47:12:984 -> CO2 (ppm): 425
13:47:17:004 -> CO2 (ppm): 465
13:47:21:025 -> CO2 (ppm): 494
13:47:29:066 -> CO2 (ppm): 505
13:47:29:066 -> CO2 (ppm): 529
13:47:33:087 -> CO2 (ppm): 550
13:47:37:107 -> CO2 (ppm): 556
13:47:41:128 -> CO2 (ppm): 572
13:47:45:148 -> CO2 (ppm): 584
13:47:49:169 -> CO2 (ppm): 590
13:47:53:188 -> CO2 (ppm): 599
13:47:55:311 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:47:55:312 -> [Configure] Info: Parse configure success
13:47:55:312 -> [Configure] Info: co2CalibrationRequested: True
13:47:55:312 -> [Configure] Info: Detected new firmware version: 3.1.9
13:47:55:313 -> state: 12
13:47:55:313 -> [StateMachine] Info: CO2 Calibration
13:47:55:313 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:47:56:312 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:47:57:312 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:47:58:312 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:47:59:312 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:48:02:321 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:48:02:335 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:48:02:344 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:48:02:357 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:48:02:358 -> [StateMachine] Info: CO2 Calibration: success
13:48:03:357 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:48:03:366 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:48:03:378 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:48:03:379 -> Flags: 0
13:48:04:387 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:48:04:399 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:48:04:400 -> Flags: 0
13:48:05:407 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:48:05:420 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:48:05:421 -> Flags: 0
13:48:06:429 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:48:06:441 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:48:06:442 -> Flags: 0
13:48:07:450 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:48:07:462 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:48:07:462 -> Flags: 0
13:48:08:463 -> Calibration Timeout
13:48:08:463 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:48:11:055 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:48:11:055 -> [ApiClient] Info: Return code: 200
13:48:11:057 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:48:11:058 -> [Configure] Info: Parse configure success
13:48:11:059 -> [Configure] Info: Detected new firmware version: 3.1.9
13:48:11:061 -> state: 12
13:48:11:981 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:48:11:982 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":599,"boot":103,"bootCount":103}
13:48:11:982 -> [ApiClient] Info: Return code: 200
13:48:11:982 -> 
13:48:11:982 -> Online mode and isPostToAirGradient = true: watchdog reset
13:48:11:983 -> 
13:48:12:004 -> CO2 (ppm): 548
13:48:12:029 -> External watchdog feed!
13:48:16:024 -> CO2 (ppm): 530
13:48:24:065 -> CO2 (ppm): 511
13:48:24:066 -> CO2 (ppm): 495
13:48:28:086 -> CO2 (ppm): 481
13:48:32:107 -> CO2 (ppm): 469
13:48:40:149 -> CO2 (ppm): 457
13:48:40:149 -> CO2 (ppm): 447
13:48:44:170 -> CO2 (ppm): 438
13:48:48:191 -> CO2 (ppm): 431
13:48:52:211 -> CO2 (ppm): 426
13:48:56:231 -> CO2 (ppm): 422
13:49:00:251 -> CO2 (ppm): 419
13:49:04:271 -> CO2 (ppm): 415
13:49:08:292 -> CO2 (ppm): 413
13:49:10:482 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:49:10:483 -> [Configure] Info: Parse configure success
13:49:10:483 -> [Configure] Info: co2CalibrationRequested: True
13:49:10:483 -> [Configure] Info: Detected new firmware version: 3.1.9
13:49:10:484 -> state: 12
13:49:10:484 -> [StateMachine] Info: CO2 Calibration
13:49:10:484 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:49:11:483 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:49:12:483 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:49:13:483 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:49:14:483 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:49:17:491 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:49:17:505 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:49:17:514 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:49:17:539 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:49:17:540 -> [StateMachine] Info: CO2 Calibration: success
13:49:18:528 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:49:18:537 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:49:18:549 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:49:18:550 -> Flags: 0
13:49:19:559 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:49:19:570 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:49:19:571 -> Flags: 0
13:49:20:578 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:49:20:591 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:49:20:591 -> Flags: 0
13:49:21:599 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:49:21:612 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:49:21:612 -> Flags: 0
13:49:22:620 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:49:22:633 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:49:22:633 -> Flags: 0
13:49:23:633 -> Calibration Timeout
13:49:23:634 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:49:26:234 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:49:26:234 -> [ApiClient] Info: Return code: 200
13:49:26:236 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:49:26:237 -> [Configure] Info: Parse configure success
13:49:26:238 -> [Configure] Info: Detected new firmware version: 3.1.9
13:49:26:239 -> state: 12
13:49:27:172 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:49:27:173 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":413,"boot":104,"bootCount":104}
13:49:27:173 -> [ApiClient] Info: Return code: 200
13:49:27:174 -> 
13:49:27:174 -> Online mode and isPostToAirGradient = true: watchdog reset
13:49:27:174 -> 
13:49:27:196 -> CO2 (ppm): 407
13:49:27:221 -> External watchdog feed!
13:49:31:217 -> CO2 (ppm): 407
13:49:35:238 -> CO2 (ppm): 406
13:49:39:258 -> CO2 (ppm): 406
13:49:43:279 -> CO2 (ppm): 405
13:49:47:299 -> CO2 (ppm): 404
13:49:51:318 -> CO2 (ppm): 402
13:49:55:338 -> CO2 (ppm): 402
13:49:59:363 -> CO2 (ppm): 402
13:50:07:401 -> CO2 (ppm): 402
13:50:07:401 -> CO2 (ppm): 402
13:50:11:422 -> CO2 (ppm): 402
13:50:15:442 -> CO2 (ppm): 401
13:50:19:463 -> CO2 (ppm): 402
13:50:23:483 -> CO2 (ppm): 403
13:50:25:653 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:50:25:654 -> [Configure] Info: Parse configure success
13:50:25:654 -> [Configure] Info: co2CalibrationRequested: True
13:50:25:654 -> [Configure] Info: Detected new firmware version: 3.1.9
13:50:25:654 -> state: 12
13:50:25:655 -> [StateMachine] Info: CO2 Calibration
13:50:25:655 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:50:26:654 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:50:27:654 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:50:28:654 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:50:29:670 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:50:32:662 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:50:32:676 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:50:32:685 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:50:32:699 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:50:32:699 -> [StateMachine] Info: CO2 Calibration: success
13:50:33:699 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:50:33:707 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:50:33:721 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:50:33:721 -> Flags: 0
13:50:34:729 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:50:34:742 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:50:34:742 -> Flags: 0
13:50:35:751 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:50:35:763 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:50:35:763 -> Flags: 0
13:50:36:771 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:50:36:784 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:50:36:784 -> Flags: 0
13:50:37:792 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:50:37:805 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:50:37:805 -> Flags: 0
13:50:38:805 -> Calibration Timeout
13:50:38:806 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:50:41:407 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:50:41:408 -> [ApiClient] Info: Return code: 200
13:50:41:409 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:50:41:410 -> [Configure] Info: Parse configure success
13:50:41:411 -> [Configure] Info: Detected new firmware version: 3.1.9
13:50:41:412 -> state: 12
13:50:42:333 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:50:42:334 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":403,"boot":105,"bootCount":105}
13:50:42:334 -> [ApiClient] Info: Return code: 200
13:50:42:335 -> 
13:50:42:335 -> Online mode and isPostToAirGradient = true: watchdog reset
13:50:42:335 -> 
13:50:42:357 -> CO2 (ppm): 401
13:50:42:382 -> External watchdog feed!
13:50:46:378 -> CO2 (ppm): 402
13:50:50:399 -> CO2 (ppm): 402
13:50:54:419 -> CO2 (ppm): 402
13:50:58:439 -> CO2 (ppm): 402
13:51:02:459 -> CO2 (ppm): 402
13:51:06:479 -> CO2 (ppm): 402
13:51:10:500 -> CO2 (ppm): 402
13:51:14:520 -> CO2 (ppm): 402
13:51:18:540 -> CO2 (ppm): 402
13:51:22:560 -> CO2 (ppm): 402
13:51:26:581 -> CO2 (ppm): 402
13:51:30:601 -> CO2 (ppm): 402
13:51:34:621 -> CO2 (ppm): 401
13:51:38:641 -> CO2 (ppm): 401
13:51:40:825 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:51:40:827 -> [Configure] Info: Parse configure success
13:51:40:827 -> [Configure] Info: co2CalibrationRequested: True
13:51:40:827 -> [Configure] Info: Detected new firmware version: 3.1.9
13:51:40:827 -> state: 12
13:51:40:827 -> [StateMachine] Info: CO2 Calibration
13:51:40:827 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:51:41:826 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:51:42:826 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:51:43:826 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:51:44:826 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:51:47:834 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:51:47:849 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:51:47:857 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:51:47:871 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:51:47:871 -> [StateMachine] Info: CO2 Calibration: success
13:51:48:871 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:51:48:880 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:51:48:892 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:51:48:892 -> Flags: 20
13:51:48:892 -> Success calibration!
13:51:48:892 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:51:51:523 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:51:51:523 -> [ApiClient] Info: Return code: 200
13:51:51:524 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:51:51:526 -> [Configure] Info: Parse configure success
13:51:51:526 -> [Configure] Info: Detected new firmware version: 3.1.9
13:51:51:528 -> state: 12
13:51:52:446 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:51:52:446 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":401,"boot":106,"bootCount":106}
13:51:52:446 -> [ApiClient] Info: Return code: 200
13:51:52:447 -> 
13:51:52:448 -> Online mode and isPostToAirGradient = true: watchdog reset
13:51:52:448 -> 
13:51:52:469 -> CO2 (ppm): 401
13:51:52:494 -> External watchdog feed!
13:51:56:489 -> CO2 (ppm): 401
13:52:00:509 -> CO2 (ppm): 401
13:52:04:530 -> CO2 (ppm): 401
13:52:08:551 -> CO2 (ppm): 401
13:52:12:571 -> CO2 (ppm): 401
13:52:16:591 -> CO2 (ppm): 401
13:52:20:615 -> CO2 (ppm): 401
13:52:24:633 -> CO2 (ppm): 401
13:52:28:653 -> CO2 (ppm): 401
13:52:32:674 -> CO2 (ppm): 401
13:52:36:694 -> CO2 (ppm): 401
13:52:40:714 -> CO2 (ppm): 401
13:52:44:734 -> CO2 (ppm): 401
13:52:48:755 -> CO2 (ppm): 401
13:52:50:912 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:52:50:913 -> [Configure] Info: Parse configure success
13:52:50:913 -> [Configure] Info: co2CalibrationRequested: True
13:52:50:915 -> [Configure] Info: Detected new firmware version: 3.1.9
13:52:50:915 -> state: 12
13:52:50:915 -> [StateMachine] Info: CO2 Calibration
13:52:50:915 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:52:51:913 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:52:53:913 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:52:53:914 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:52:54:913 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:52:57:921 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:52:57:935 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:52:57:943 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:52:57:958 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:52:57:958 -> [StateMachine] Info: CO2 Calibration: success
13:52:58:958 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:52:58:966 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:52:58:980 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:52:58:980 -> Flags: 20
13:52:58:980 -> Success calibration!
13:52:58:980 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:53:01:563 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:53:01:563 -> [ApiClient] Info: Return code: 200
13:53:01:565 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:53:01:567 -> [Configure] Info: Parse configure success
13:53:01:568 -> [Configure] Info: Detected new firmware version: 3.1.9
13:53:01:569 -> state: 12
13:53:02:489 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:53:02:489 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":401,"boot":107,"bootCount":107}
13:53:02:489 -> [ApiClient] Info: Return code: 200
13:53:02:490 -> 
13:53:02:490 -> Online mode and isPostToAirGradient = true: watchdog reset
13:53:02:490 -> 
13:53:02:512 -> CO2 (ppm): 401
13:53:02:537 -> External watchdog feed!
13:53:06:533 -> CO2 (ppm): 401
13:53:10:553 -> CO2 (ppm): 401
13:53:14:573 -> CO2 (ppm): 401
13:53:18:593 -> CO2 (ppm): 401
13:53:22:613 -> CO2 (ppm): 401
13:53:26:633 -> CO2 (ppm): 401
13:53:30:653 -> CO2 (ppm): 401
13:53:34:672 -> CO2 (ppm): 401
13:53:38:693 -> CO2 (ppm): 401
13:53:42:714 -> CO2 (ppm): 401
13:53:46:734 -> CO2 (ppm): 401
13:53:54:774 -> CO2 (ppm): 402
13:53:54:774 -> CO2 (ppm): 402
13:53:58:795 -> CO2 (ppm): 402
13:54:01:000 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:54:01:002 -> [Configure] Info: Parse configure success
13:54:01:002 -> [Configure] Info: co2CalibrationRequested: True
13:54:01:003 -> [Configure] Info: Detected new firmware version: 3.1.9
13:54:01:003 -> state: 12
13:54:01:003 -> [StateMachine] Info: CO2 Calibration
13:54:01:003 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:54:02:002 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:54:03:002 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:54:04:002 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:54:08:010 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:54:08:010 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:54:08:024 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:54:08:032 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:54:08:047 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:54:08:047 -> [StateMachine] Info: CO2 Calibration: success
13:54:09:047 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:54:09:055 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:54:09:068 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:54:09:068 -> Flags: 20
13:54:09:068 -> Success calibration!
13:54:09:068 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:54:11:704 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:54:11:705 -> [ApiClient] Info: Return code: 200
13:54:11:706 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:54:11:707 -> [Configure] Info: Parse configure success
13:54:11:709 -> [Configure] Info: Detected new firmware version: 3.1.9
13:54:11:709 -> state: 12
13:54:12:570 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:54:12:570 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":402,"boot":108,"bootCount":108}
13:54:12:571 -> [ApiClient] Info: Return code: 200
13:54:12:571 -> 
13:54:12:571 -> Online mode and isPostToAirGradient = true: watchdog reset
13:54:12:571 -> 
13:54:12:593 -> CO2 (ppm): 401
13:54:12:618 -> External watchdog feed!
13:54:16:613 -> CO2 (ppm): 401
13:54:20:634 -> CO2 (ppm): 400
13:54:24:655 -> CO2 (ppm): 400
13:54:28:675 -> CO2 (ppm): 400
13:54:32:712 -> CO2 (ppm): 400
13:54:36:716 -> CO2 (ppm): 400
13:54:40:736 -> CO2 (ppm): 400
13:54:44:756 -> CO2 (ppm): 400
13:54:52:798 -> CO2 (ppm): 400
13:54:52:798 -> CO2 (ppm): 400
13:54:56:818 -> CO2 (ppm): 400
13:55:00:838 -> CO2 (ppm): 400
13:55:08:879 -> CO2 (ppm): 400
13:55:08:879 -> CO2 (ppm): 400
13:55:11:088 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:55:11:089 -> [Configure] Info: Parse configure success
13:55:11:089 -> [Configure] Info: co2CalibrationRequested: True
13:55:11:090 -> [Configure] Info: Detected new firmware version: 3.1.9
13:55:11:091 -> state: 12
13:55:11:091 -> [StateMachine] Info: CO2 Calibration
13:55:11:091 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:55:12:090 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:55:13:090 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:55:14:090 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:55:15:091 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:55:18:099 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:55:18:112 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:55:18:121 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:55:18:135 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:55:18:135 -> [StateMachine] Info: CO2 Calibration: success
13:55:19:135 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:55:19:144 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:55:19:156 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:55:19:156 -> Flags: 20
13:55:19:156 -> Success calibration!
13:55:19:156 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:55:21:745 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:55:21:746 -> [ApiClient] Info: Return code: 200
13:55:21:747 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:55:21:749 -> [Configure] Info: Parse configure success
13:55:21:749 -> [Configure] Info: Detected new firmware version: 3.1.9
13:55:21:751 -> state: 12
13:55:22:692 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:55:22:692 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":400,"boot":109,"bootCount":109}
13:55:22:693 -> [ApiClient] Info: Return code: 200
13:55:22:694 -> 
13:55:22:694 -> Online mode and isPostToAirGradient = true: watchdog reset
13:55:22:694 -> 
13:55:22:714 -> CO2 (ppm): 401
13:55:22:739 -> External watchdog feed!
13:55:26:735 -> CO2 (ppm): 401
13:55:34:776 -> CO2 (ppm): 401
13:55:34:776 -> CO2 (ppm): 401
13:55:38:797 -> CO2 (ppm): 401
13:55:42:817 -> CO2 (ppm): 401
13:55:46:837 -> CO2 (ppm): 401
13:55:54:879 -> CO2 (ppm): 401
13:55:54:879 -> CO2 (ppm): 401
13:55:58:900 -> CO2 (ppm): 401
13:56:02:921 -> CO2 (ppm): 401
13:56:06:942 -> CO2 (ppm): 401
13:56:10:963 -> CO2 (ppm): 401
13:56:14:983 -> CO2 (ppm): 401
13:56:19:003 -> CO2 (ppm): 401
13:56:21:177 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:56:21:178 -> [Configure] Info: Parse configure success
13:56:21:178 -> [Configure] Info: co2CalibrationRequested: True
13:56:21:178 -> [Configure] Info: Detected new firmware version: 3.1.9
13:56:21:179 -> state: 12
13:56:21:179 -> [StateMachine] Info: CO2 Calibration
13:56:21:179 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:56:22:178 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:56:23:178 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:56:24:178 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:56:25:178 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:56:28:187 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:56:28:200 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:56:28:209 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:56:28:223 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:56:28:223 -> [StateMachine] Info: CO2 Calibration: success
13:56:29:223 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:56:29:232 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:56:29:244 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
13:56:29:245 -> Flags: 20
13:56:29:245 -> Success calibration!
13:56:29:245 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
13:56:31:888 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:56:31:888 -> [ApiClient] Info: Return code: 200
13:56:31:890 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:56:31:892 -> [Configure] Info: Parse configure success
13:56:31:892 -> [Configure] Info: Detected new firmware version: 3.1.9
13:56:31:894 -> state: 12
13:56:32:915 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:56:32:915 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":401,"boot":110,"bootCount":110}
13:56:32:915 -> [ApiClient] Info: Return code: 200
13:56:32:916 -> 
13:56:32:917 -> Online mode and isPostToAirGradient = true: watchdog reset
13:56:32:917 -> 
13:56:32:938 -> CO2 (ppm): 401
13:56:32:963 -> External watchdog feed!
13:56:36:958 -> CO2 (ppm): 401
13:56:40:979 -> CO2 (ppm): 401
13:56:44:999 -> CO2 (ppm): 401
13:56:49:019 -> CO2 (ppm): 401
13:56:53:040 -> CO2 (ppm): 401
13:56:57:060 -> CO2 (ppm): 401
13:57:01:081 -> CO2 (ppm): 401
13:57:05:102 -> CO2 (ppm): 402
13:57:09:124 -> CO2 (ppm): 409
13:57:13:145 -> CO2 (ppm): 435
13:57:17:166 -> CO2 (ppm): 480
13:57:21:186 -> CO2 (ppm): 520
13:57:25:206 -> CO2 (ppm): 555
13:57:29:227 -> CO2 (ppm): 574
13:57:31:293 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:57:31:293 -> [Configure] Info: Parse configure success
13:57:31:294 -> [Configure] Info: co2CalibrationRequested: True
13:57:31:295 -> [Configure] Info: Detected new firmware version: 3.1.9
13:57:31:295 -> state: 12
13:57:31:295 -> [StateMachine] Info: CO2 Calibration
13:57:31:295 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:57:32:294 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:57:33:294 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:57:35:294 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:57:35:294 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:57:38:310 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:57:38:315 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:57:38:324 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:57:38:338 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:57:38:338 -> [StateMachine] Info: CO2 Calibration: success
13:57:39:338 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:57:39:353 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:57:39:359 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:57:39:359 -> Flags: 0
13:57:40:367 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:57:40:380 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:57:40:393 -> Flags: 0
13:57:41:388 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:57:41:401 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:57:41:401 -> Flags: 0
13:57:42:409 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:57:42:421 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:57:42:422 -> Flags: 0
13:57:43:430 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:57:43:443 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:57:43:443 -> Flags: 0
13:57:44:443 -> Calibration Timeout
13:57:44:444 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:57:47:052 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:57:47:053 -> [ApiClient] Info: Return code: 200
13:57:47:054 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:57:47:055 -> [Configure] Info: Parse configure success
13:57:47:056 -> [Configure] Info: Detected new firmware version: 3.1.9
13:57:47:057 -> state: 12
13:57:47:987 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:57:47:987 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":574,"boot":111,"bootCount":111}
13:57:47:987 -> [ApiClient] Info: Return code: 200
13:57:47:988 -> 
13:57:47:988 -> Online mode and isPostToAirGradient = true: watchdog reset
13:57:47:988 -> 
13:57:48:010 -> CO2 (ppm): 523
13:57:48:035 -> External watchdog feed!
13:57:52:031 -> CO2 (ppm): 507
13:57:56:057 -> CO2 (ppm): 492
13:58:00:073 -> CO2 (ppm): 478
13:58:04:094 -> CO2 (ppm): 466
13:58:08:114 -> CO2 (ppm): 457
13:58:12:135 -> CO2 (ppm): 448
13:58:16:154 -> CO2 (ppm): 441
13:58:20:176 -> CO2 (ppm): 436
13:58:24:197 -> CO2 (ppm): 431
13:58:28:217 -> CO2 (ppm): 427
13:58:32:238 -> CO2 (ppm): 423
13:58:36:272 -> CO2 (ppm): 420
13:58:40:281 -> CO2 (ppm): 418
13:58:44:301 -> CO2 (ppm): 415
13:58:46:463 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:58:46:464 -> [Configure] Info: Parse configure success
13:58:46:464 -> [Configure] Info: co2CalibrationRequested: True
13:58:46:465 -> [Configure] Info: Detected new firmware version: 3.1.9
13:58:46:465 -> state: 12
13:58:46:465 -> [StateMachine] Info: CO2 Calibration
13:58:46:465 -> [StateMachine] Info: Start CO2 calib after 5 sec
13:58:47:464 -> [StateMachine] Info: Start CO2 calib after 4 sec
13:58:48:464 -> [StateMachine] Info: Start CO2 calib after 3 sec
13:58:49:464 -> [StateMachine] Info: Start CO2 calib after 2 sec
13:58:50:464 -> [StateMachine] Info: Start CO2 calib after 1 sec
13:58:53:472 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:58:53:487 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
13:58:53:494 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:58:53:507 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
13:58:53:508 -> [StateMachine] Info: CO2 Calibration: success
13:58:54:516 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
13:58:54:516 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:58:54:530 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:58:54:530 -> Flags: 0
13:58:55:537 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:58:55:550 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:58:55:562 -> Flags: 0
13:58:56:558 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:58:56:570 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:58:56:571 -> Flags: 0
13:58:57:579 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:58:57:592 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:58:57:592 -> Flags: 0
13:58:58:600 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
13:58:58:612 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
13:58:58:613 -> Flags: 0
13:58:59:613 -> Calibration Timeout
13:58:59:614 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
13:59:02:214 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
13:59:02:214 -> [ApiClient] Info: Return code: 200
13:59:02:216 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
13:59:02:218 -> [Configure] Info: Parse configure success
13:59:02:219 -> [Configure] Info: Detected new firmware version: 3.1.9
13:59:02:219 -> state: 12
13:59:03:158 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
13:59:03:158 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":415,"boot":112,"bootCount":112}
13:59:03:158 -> [ApiClient] Info: Return code: 200
13:59:03:159 -> 
13:59:03:159 -> Online mode and isPostToAirGradient = true: watchdog reset
13:59:03:159 -> 
13:59:03:180 -> CO2 (ppm): 417
13:59:03:205 -> External watchdog feed!
13:59:07:202 -> CO2 (ppm): 421
13:59:11:223 -> CO2 (ppm): 423
13:59:15:244 -> CO2 (ppm): 424
13:59:19:264 -> CO2 (ppm): 422
13:59:23:284 -> CO2 (ppm): 421
13:59:27:304 -> CO2 (ppm): 421
13:59:31:325 -> CO2 (ppm): 419
13:59:35:345 -> CO2 (ppm): 417
13:59:39:365 -> CO2 (ppm): 415
13:59:43:386 -> CO2 (ppm): 414
13:59:51:426 -> CO2 (ppm): 413
13:59:51:426 -> CO2 (ppm): 416
13:59:56:800 -> CO2 (ppm): 418
14:00:00:821 -> CO2 (ppm): 419
14:00:02:987 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:00:02:988 -> [Configure] Info: Parse configure success
14:00:02:988 -> [Configure] Info: co2CalibrationRequested: True
14:00:02:989 -> [Configure] Info: Detected new firmware version: 3.1.9
14:00:02:989 -> state: 12
14:00:02:989 -> [StateMachine] Info: CO2 Calibration
14:00:02:990 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:00:03:989 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:00:04:989 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:00:05:989 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:00:06:989 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:00:09:997 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:00:10:010 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:00:10:019 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:00:10:033 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:00:10:034 -> [StateMachine] Info: CO2 Calibration: success
14:00:11:034 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:00:11:042 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:00:11:054 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:00:11:055 -> Flags: 0
14:00:12:063 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:00:12:075 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:00:12:076 -> Flags: 0
14:00:13:084 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:00:13:096 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:00:13:097 -> Flags: 0
14:00:14:105 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:00:14:117 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:00:14:118 -> Flags: 0
14:00:15:126 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:00:15:141 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:00:15:141 -> Flags: 0
14:00:16:138 -> Calibration Timeout
14:00:16:139 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:00:18:728 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:00:18:728 -> [ApiClient] Info: Return code: 200
14:00:18:729 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:00:18:731 -> [Configure] Info: Parse configure success
14:00:18:731 -> [Configure] Info: Detected new firmware version: 3.1.9
14:00:18:733 -> state: 12
14:00:19:677 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:00:19:678 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":419,"boot":113,"bootCount":113}
14:00:19:678 -> [ApiClient] Info: Return code: 200
14:00:19:678 -> 
14:00:19:679 -> Online mode and isPostToAirGradient = true: watchdog reset
14:00:19:679 -> 
14:00:19:700 -> CO2 (ppm): 424
14:00:19:725 -> External watchdog feed!
14:00:23:721 -> CO2 (ppm): 425
14:00:27:741 -> CO2 (ppm): 424
14:00:31:762 -> CO2 (ppm): 423
14:00:35:783 -> CO2 (ppm): 421
14:00:39:804 -> CO2 (ppm): 417
14:00:43:825 -> CO2 (ppm): 415
14:00:47:845 -> CO2 (ppm): 412
14:00:51:896 -> CO2 (ppm): 410
14:00:55:916 -> CO2 (ppm): 409
14:00:59:937 -> CO2 (ppm): 407
14:01:07:983 -> CO2 (ppm): 407
14:01:07:983 -> CO2 (ppm): 406
14:01:11:999 -> CO2 (ppm): 407
14:01:16:019 -> CO2 (ppm): 416
14:01:18:159 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:01:18:160 -> [Configure] Info: Parse configure success
14:01:18:160 -> [Configure] Info: co2CalibrationRequested: True
14:01:18:160 -> [Configure] Info: Detected new firmware version: 3.1.9
14:01:18:161 -> state: 12
14:01:18:161 -> [StateMachine] Info: CO2 Calibration
14:01:18:161 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:01:19:160 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:01:20:160 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:01:21:160 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:01:22:160 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:01:25:168 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:01:25:183 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:01:25:190 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:01:25:205 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:01:25:205 -> [StateMachine] Info: CO2 Calibration: success
14:01:26:205 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:01:26:218 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:01:26:226 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:01:26:227 -> Flags: 0
14:01:27:234 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:01:27:255 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:01:27:256 -> Flags: 0
14:01:28:255 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:01:28:268 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:01:28:268 -> Flags: 0
14:01:29:276 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:01:29:289 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:01:29:289 -> Flags: 0
14:01:30:297 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:01:30:310 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:01:30:310 -> Flags: 0
14:01:31:310 -> Calibration Timeout
14:01:31:310 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:01:33:996 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:01:33:996 -> [ApiClient] Info: Return code: 200
14:01:33:998 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:01:33:999 -> [Configure] Info: Parse configure success
14:01:34:000 -> [Configure] Info: Detected new firmware version: 3.1.9
14:01:34:001 -> state: 12
14:01:34:948 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:01:34:949 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":416,"boot":114,"bootCount":114}
14:01:34:949 -> [ApiClient] Info: Return code: 200
14:01:34:950 -> 
14:01:34:950 -> Online mode and isPostToAirGradient = true: watchdog reset
14:01:34:950 -> 
14:01:34:972 -> CO2 (ppm): 423
14:01:34:997 -> External watchdog feed!
14:01:38:992 -> CO2 (ppm): 421
14:01:43:012 -> CO2 (ppm): 419
14:01:47:032 -> CO2 (ppm): 417
14:01:51:052 -> CO2 (ppm): 416
14:01:55:072 -> CO2 (ppm): 414
14:02:03:113 -> CO2 (ppm): 411
14:02:03:113 -> CO2 (ppm): 410
14:02:07:134 -> CO2 (ppm): 408
14:02:11:155 -> CO2 (ppm): 406
14:02:15:175 -> CO2 (ppm): 405
14:02:23:215 -> CO2 (ppm): 404
14:02:23:215 -> CO2 (ppm): 403
14:02:27:235 -> CO2 (ppm): 403
14:02:31:255 -> CO2 (ppm): 404
14:02:33:330 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:02:33:331 -> [Configure] Info: Parse configure success
14:02:33:331 -> [Configure] Info: co2CalibrationRequested: True
14:02:33:331 -> [Configure] Info: Detected new firmware version: 3.1.9
14:02:33:331 -> state: 12
14:02:33:331 -> [StateMachine] Info: CO2 Calibration
14:02:33:331 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:02:34:331 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:02:35:331 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:02:36:331 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:02:37:331 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:02:40:339 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:02:40:354 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:02:40:362 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:02:40:375 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:02:40:375 -> [StateMachine] Info: CO2 Calibration: success
14:02:41:376 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:02:41:384 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:02:41:396 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:02:41:410 -> Flags: 0
14:02:42:405 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:02:42:417 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:02:42:418 -> Flags: 0
14:02:43:426 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:02:43:438 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:02:43:439 -> Flags: 0
14:02:44:447 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:02:44:459 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:02:44:460 -> Flags: 0
14:02:45:468 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:02:45:480 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:02:45:481 -> Flags: 0
14:02:46:480 -> Calibration Timeout
14:02:46:481 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:02:49:152 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:02:49:153 -> [ApiClient] Info: Return code: 200
14:02:49:155 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:02:49:156 -> [Configure] Info: Parse configure success
14:02:49:157 -> [Configure] Info: Detected new firmware version: 3.1.9
14:02:49:158 -> state: 12
14:02:50:089 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:02:50:089 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":404,"boot":115,"bootCount":115}
14:02:50:089 -> [ApiClient] Info: Return code: 200
14:02:50:090 -> 
14:02:50:091 -> Online mode and isPostToAirGradient = true: watchdog reset
14:02:50:091 -> 
14:02:50:112 -> CO2 (ppm): 405
14:02:50:137 -> External watchdog feed!
14:02:54:133 -> CO2 (ppm): 405
14:02:58:153 -> CO2 (ppm): 404
14:03:02:175 -> CO2 (ppm): 404
14:03:10:216 -> CO2 (ppm): 403
14:03:10:216 -> CO2 (ppm): 402
14:03:14:237 -> CO2 (ppm): 403
14:03:18:258 -> CO2 (ppm): 402
14:03:22:278 -> CO2 (ppm): 402
14:03:26:298 -> CO2 (ppm): 402
14:03:30:318 -> CO2 (ppm): 402
14:03:34:339 -> CO2 (ppm): 404
14:03:38:360 -> CO2 (ppm): 404
14:03:42:381 -> CO2 (ppm): 403
14:03:46:401 -> CO2 (ppm): 402
14:03:48:501 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:03:48:502 -> [Configure] Info: Parse configure success
14:03:48:503 -> [Configure] Info: co2CalibrationRequested: True
14:03:48:504 -> [Configure] Info: Detected new firmware version: 3.1.9
14:03:48:504 -> state: 12
14:03:48:504 -> [StateMachine] Info: CO2 Calibration
14:03:48:504 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:03:49:503 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:03:50:503 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:03:51:503 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:03:52:503 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:03:55:511 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:03:55:529 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:03:55:533 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:03:55:546 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:03:55:547 -> [StateMachine] Info: CO2 Calibration: success
14:03:56:546 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:03:56:555 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:03:56:570 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:03:56:570 -> Flags: 0
14:03:57:576 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:03:57:588 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:03:57:589 -> Flags: 0
14:03:58:597 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:03:58:609 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:03:58:610 -> Flags: 0
14:03:59:617 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:03:59:630 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:03:59:631 -> Flags: 0
14:04:00:639 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:04:00:651 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:04:00:652 -> Flags: 0
14:04:01:651 -> Calibration Timeout
14:04:01:652 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:04:04:315 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:04:04:315 -> [ApiClient] Info: Return code: 200
14:04:04:316 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:04:04:318 -> [Configure] Info: Parse configure success
14:04:04:319 -> [Configure] Info: Detected new firmware version: 3.1.9
14:04:04:320 -> state: 12
14:04:05:243 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:04:05:244 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":402,"boot":116,"bootCount":116}
14:04:05:244 -> [ApiClient] Info: Return code: 200
14:04:05:266 -> 
14:04:05:266 -> Online mode and isPostToAirGradient = true: watchdog reset
14:04:05:266 -> 
14:04:05:267 -> CO2 (ppm): 402
14:04:05:291 -> External watchdog feed!
14:04:09:286 -> CO2 (ppm): 404
14:04:13:306 -> CO2 (ppm): 408
14:04:17:327 -> CO2 (ppm): 409
14:04:21:348 -> CO2 (ppm): 409
14:04:29:390 -> CO2 (ppm): 409
14:04:29:390 -> CO2 (ppm): 408
14:04:33:411 -> CO2 (ppm): 408
14:04:37:431 -> CO2 (ppm): 407
14:04:41:452 -> CO2 (ppm): 407
14:04:45:473 -> CO2 (ppm): 406
14:04:49:493 -> CO2 (ppm): 406
14:04:53:513 -> CO2 (ppm): 405
14:04:57:534 -> CO2 (ppm): 405
14:05:01:555 -> CO2 (ppm): 405
14:05:03:671 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:05:03:673 -> [Configure] Info: Parse configure success
14:05:03:673 -> [Configure] Info: co2CalibrationRequested: True
14:05:03:673 -> [Configure] Info: Detected new firmware version: 3.1.9
14:05:03:673 -> state: 12
14:05:03:673 -> [StateMachine] Info: CO2 Calibration
14:05:03:674 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:05:04:674 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:05:05:674 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:05:06:674 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:05:07:674 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:05:10:682 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:05:10:696 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:05:10:705 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:05:10:718 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:05:10:719 -> [StateMachine] Info: CO2 Calibration: success
14:05:11:719 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:05:11:727 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:05:11:741 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:05:11:742 -> Flags: 0
14:05:12:749 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:05:12:761 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:05:12:763 -> Flags: 0
14:05:13:770 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:05:13:782 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:05:13:783 -> Flags: 0
14:05:14:791 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:05:14:803 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:05:14:804 -> Flags: 0
14:05:15:812 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:05:15:824 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:05:15:825 -> Flags: 0
14:05:16:824 -> Calibration Timeout
14:05:16:825 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:05:19:477 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:05:19:477 -> [ApiClient] Info: Return code: 200
14:05:19:478 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:05:19:480 -> [Configure] Info: Parse configure success
14:05:19:480 -> [Configure] Info: Detected new firmware version: 3.1.9
14:05:19:482 -> state: 12
14:05:20:424 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:05:20:424 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":405,"boot":117,"bootCount":117}
14:05:20:424 -> [ApiClient] Info: Return code: 200
14:05:20:425 -> 
14:05:20:425 -> Online mode and isPostToAirGradient = true: watchdog reset
14:05:20:425 -> 
14:05:20:449 -> CO2 (ppm): 405
14:05:20:471 -> External watchdog feed!
14:05:24:468 -> CO2 (ppm): 405
14:05:28:488 -> CO2 (ppm): 405
14:05:32:508 -> CO2 (ppm): 405
14:05:36:528 -> CO2 (ppm): 405
14:05:40:549 -> CO2 (ppm): 405
14:05:44:570 -> CO2 (ppm): 405
14:05:48:591 -> CO2 (ppm): 405
14:05:52:611 -> CO2 (ppm): 405
14:06:00:652 -> CO2 (ppm): 405
14:06:00:652 -> CO2 (ppm): 405
14:06:04:672 -> CO2 (ppm): 405
14:06:08:692 -> CO2 (ppm): 405
14:06:12:713 -> CO2 (ppm): 405
14:06:16:732 -> CO2 (ppm): 405
14:06:18:844 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:06:18:845 -> [Configure] Info: Parse configure success
14:06:18:845 -> [Configure] Info: co2CalibrationRequested: True
14:06:18:846 -> [Configure] Info: Detected new firmware version: 3.1.9
14:06:18:846 -> state: 12
14:06:18:846 -> [StateMachine] Info: CO2 Calibration
14:06:18:847 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:06:20:846 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:06:20:846 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:06:21:849 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:06:22:845 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:06:25:854 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:06:25:868 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:06:25:877 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:06:25:890 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:06:25:891 -> [StateMachine] Info: CO2 Calibration: success
14:06:26:890 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:06:26:899 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:06:26:951 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
14:06:26:952 -> Flags: 20
14:06:26:952 -> Success calibration!
14:06:26:952 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
14:06:29:517 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:06:29:517 -> [ApiClient] Info: Return code: 200
14:06:29:518 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:06:29:520 -> [Configure] Info: Parse configure success
14:06:29:521 -> [Configure] Info: Detected new firmware version: 3.1.9
14:06:29:522 -> state: 12
14:06:30:462 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:06:30:462 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":405,"boot":118,"bootCount":118}
14:06:30:462 -> [ApiClient] Info: Return code: 200
14:06:30:463 -> 
14:06:30:464 -> Online mode and isPostToAirGradient = true: watchdog reset
14:06:30:464 -> 
14:06:30:484 -> CO2 (ppm): 401
14:06:30:509 -> External watchdog feed!
14:06:34:504 -> CO2 (ppm): 400
14:06:38:524 -> CO2 (ppm): 400
14:06:42:545 -> CO2 (ppm): 400
14:06:46:566 -> CO2 (ppm): 400
14:06:50:587 -> CO2 (ppm): 399
14:06:54:608 -> CO2 (ppm): 398
14:06:58:629 -> CO2 (ppm): 398
14:07:02:649 -> CO2 (ppm): 398
14:07:06:669 -> CO2 (ppm): 398
14:07:10:689 -> CO2 (ppm): 398
14:07:14:709 -> CO2 (ppm): 398
14:07:18:730 -> CO2 (ppm): 398
14:07:22:791 -> CO2 (ppm): 398
14:07:26:811 -> CO2 (ppm): 398
14:07:28:971 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:07:28:972 -> [Configure] Info: Parse configure success
14:07:28:973 -> [Configure] Info: co2CalibrationRequested: True
14:07:28:973 -> [Configure] Info: Detected new firmware version: 3.1.9
14:07:28:974 -> state: 12
14:07:28:974 -> [StateMachine] Info: CO2 Calibration
14:07:28:974 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:07:29:973 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:07:30:973 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:07:31:973 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:07:32:973 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:07:35:981 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:07:36:004 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:07:36:005 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:07:36:017 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:07:36:018 -> [StateMachine] Info: CO2 Calibration: success
14:07:37:026 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:07:37:027 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:07:37:046 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
14:07:37:047 -> Flags: 20
14:07:37:047 -> Success calibration!
14:07:37:047 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
14:07:39:661 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:07:39:661 -> [ApiClient] Info: Return code: 200
14:07:39:662 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:07:39:664 -> [Configure] Info: Parse configure success
14:07:39:665 -> [Configure] Info: Detected new firmware version: 3.1.9
14:07:39:666 -> state: 12
14:07:40:618 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:07:40:618 -> [ApiClient] Info: DATA: {"wifi":-56,"rco2":398,"boot":119,"bootCount":119}
14:07:40:619 -> [ApiClient] Info: Return code: 200
14:07:40:620 -> 
14:07:40:620 -> Online mode and isPostToAirGradient = true: watchdog reset
14:07:40:620 -> 
14:07:40:641 -> CO2 (ppm): 401
14:07:40:666 -> External watchdog feed!
14:07:44:662 -> CO2 (ppm): 400
14:07:48:682 -> CO2 (ppm): 400
14:07:52:703 -> CO2 (ppm): 400
14:07:56:723 -> CO2 (ppm): 401
14:08:00:743 -> CO2 (ppm): 400
14:08:04:764 -> CO2 (ppm): 400
14:08:08:784 -> CO2 (ppm): 400
14:08:12:805 -> CO2 (ppm): 400
14:08:16:826 -> CO2 (ppm): 400
14:08:20:846 -> CO2 (ppm): 400
14:08:24:867 -> CO2 (ppm): 400
14:08:28:887 -> CO2 (ppm): 400
14:08:32:907 -> CO2 (ppm): 400
14:08:36:928 -> CO2 (ppm): 401
14:08:39:059 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:08:39:060 -> [Configure] Info: Parse configure success
14:08:39:060 -> [Configure] Info: co2CalibrationRequested: True
14:08:39:061 -> [Configure] Info: Detected new firmware version: 3.1.9
14:08:39:061 -> state: 12
14:08:39:061 -> [StateMachine] Info: CO2 Calibration
14:08:39:062 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:08:40:061 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:08:42:061 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:08:42:061 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:08:43:060 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:08:46:077 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:08:46:082 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:08:46:091 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:08:46:104 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:08:46:105 -> [StateMachine] Info: CO2 Calibration: success
14:08:47:113 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:08:47:114 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:08:47:125 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
14:08:47:126 -> Flags: 20
14:08:47:126 -> Success calibration!
14:08:47:126 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
14:08:49:713 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:08:49:713 -> [ApiClient] Info: Return code: 200
14:08:49:713 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:08:49:713 -> [Configure] Info: Parse configure success
14:08:49:713 -> [Configure] Info: Detected new firmware version: 3.1.9
14:08:49:713 -> state: 12
14:08:50:636 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:08:50:637 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":401,"boot":120,"bootCount":120}
14:08:50:637 -> [ApiClient] Info: Return code: 200
14:08:50:637 -> 
14:08:50:638 -> Online mode and isPostToAirGradient = true: watchdog reset
14:08:50:638 -> 
14:08:50:659 -> CO2 (ppm): 406
14:08:50:684 -> External watchdog feed!
14:08:54:679 -> CO2 (ppm): 406
14:08:58:701 -> CO2 (ppm): 406
14:09:02:722 -> CO2 (ppm): 407
14:09:06:743 -> CO2 (ppm): 407
14:09:10:764 -> CO2 (ppm): 406
14:09:14:786 -> CO2 (ppm): 406
14:09:18:804 -> CO2 (ppm): 405
14:09:22:825 -> CO2 (ppm): 405
14:09:26:846 -> CO2 (ppm): 404
14:09:30:866 -> CO2 (ppm): 404
14:09:34:887 -> CO2 (ppm): 404
14:09:38:907 -> CO2 (ppm): 404
14:09:42:927 -> CO2 (ppm): 404
14:09:46:946 -> CO2 (ppm): 404
14:09:49:145 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:09:49:146 -> [Configure] Info: Parse configure success
14:09:49:146 -> [Configure] Info: co2CalibrationRequested: True
14:09:49:147 -> [Configure] Info: Detected new firmware version: 3.1.9
14:09:49:147 -> state: 12
14:09:49:147 -> [StateMachine] Info: CO2 Calibration
14:09:49:147 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:09:50:146 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:09:51:146 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:09:52:147 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:09:53:147 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:09:56:155 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:09:56:168 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:09:56:177 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:09:56:190 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:09:56:191 -> [StateMachine] Info: CO2 Calibration: success
14:09:57:191 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:09:57:199 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:09:57:211 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
14:09:57:212 -> Flags: 20
14:09:57:212 -> Success calibration!
14:09:57:212 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
14:09:59:846 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:09:59:846 -> [ApiClient] Info: Return code: 200
14:09:59:848 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:09:59:849 -> [Configure] Info: Parse configure success
14:09:59:850 -> [Configure] Info: Detected new firmware version: 3.1.9
14:09:59:851 -> state: 12
14:10:00:790 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:10:00:790 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":404,"boot":121,"bootCount":121}
14:10:00:790 -> [ApiClient] Info: Return code: 200
14:10:00:792 -> 
14:10:00:792 -> Online mode and isPostToAirGradient = true: watchdog reset
14:10:00:792 -> 
14:10:00:813 -> CO2 (ppm): 400
14:10:00:837 -> External watchdog feed!
14:10:04:832 -> CO2 (ppm): 400
14:10:08:853 -> CO2 (ppm): 400
14:10:12:873 -> CO2 (ppm): 400
14:10:16:894 -> CO2 (ppm): 399
14:10:20:914 -> CO2 (ppm): 399
14:10:24:934 -> CO2 (ppm): 398
14:10:28:954 -> CO2 (ppm): 397
14:10:32:974 -> CO2 (ppm): 397
14:10:36:994 -> CO2 (ppm): 397
14:10:41:015 -> CO2 (ppm): 396
14:10:45:036 -> CO2 (ppm): 397
14:10:49:056 -> CO2 (ppm): 402
14:10:53:077 -> CO2 (ppm): 403
14:10:57:097 -> CO2 (ppm): 403
14:10:59:232 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:10:59:232 -> [Configure] Info: Parse configure success
14:10:59:232 -> [Configure] Info: co2CalibrationRequested: True
14:10:59:233 -> [Configure] Info: Detected new firmware version: 3.1.9
14:10:59:233 -> state: 12
14:10:59:234 -> [StateMachine] Info: CO2 Calibration
14:10:59:234 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:11:00:233 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:11:01:233 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:11:02:233 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:11:03:233 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:11:06:241 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:11:06:255 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:11:06:263 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:11:06:278 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:11:06:279 -> [StateMachine] Info: CO2 Calibration: success
14:11:07:278 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:11:07:286 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:11:07:299 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:11:07:299 -> Flags: 0
14:11:08:307 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:11:08:320 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:11:08:320 -> Flags: 0
14:11:09:328 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:11:09:341 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:11:09:341 -> Flags: 0
14:11:10:349 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:11:10:362 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:11:10:362 -> Flags: 0
14:11:11:370 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:11:11:383 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:11:11:383 -> Flags: 0
14:11:12:383 -> Calibration Timeout
14:11:12:383 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:11:15:008 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:11:15:008 -> [ApiClient] Info: Return code: 200
14:11:15:010 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:11:15:011 -> [Configure] Info: Parse configure success
14:11:15:012 -> [Configure] Info: Detected new firmware version: 3.1.9
14:11:15:013 -> state: 12
14:11:15:964 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:11:15:964 -> [ApiClient] Info: DATA: {"wifi":-59,"rco2":403,"boot":122,"bootCount":122}
14:11:15:964 -> [ApiClient] Info: Return code: 200
14:11:15:965 -> 
14:11:15:965 -> Online mode and isPostToAirGradient = true: watchdog reset
14:11:15:965 -> 
14:11:20:974 -> Get CO2 failed: 1
14:11:20:998 -> External watchdog feed!
14:11:24:994 -> CO2 (ppm): 407
14:11:29:015 -> CO2 (ppm): 402
14:11:33:035 -> CO2 (ppm): 400
14:11:37:055 -> CO2 (ppm): 396
14:11:41:077 -> CO2 (ppm): 402
14:11:45:097 -> CO2 (ppm): 398
14:11:49:118 -> CO2 (ppm): 397
14:11:53:138 -> CO2 (ppm): 395
14:11:57:158 -> CO2 (ppm): 393
14:12:01:178 -> CO2 (ppm): 393
14:12:05:198 -> CO2 (ppm): 393
14:12:09:218 -> CO2 (ppm): 393
14:12:13:239 -> CO2 (ppm): 393
14:12:14:402 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:12:14:403 -> [Configure] Info: Parse configure success
14:12:14:403 -> [Configure] Info: co2CalibrationRequested: True
14:12:14:404 -> [Configure] Info: Detected new firmware version: 3.1.9
14:12:14:404 -> state: 12
14:12:14:404 -> [StateMachine] Info: CO2 Calibration
14:12:14:404 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:12:15:404 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:12:16:404 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:12:17:404 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:12:18:404 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:12:21:412 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:12:21:425 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:12:21:434 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:12:21:447 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:12:21:448 -> [StateMachine] Info: CO2 Calibration: success
14:12:22:447 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:12:22:456 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:12:22:469 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x20  0xAD  0x88 
14:12:22:470 -> Flags: 20
14:12:22:470 -> Success calibration!
14:12:22:470 -> [StateMachine] Info: CO2 Calibration: finish after 0 sec
14:12:25:150 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:12:25:150 -> [ApiClient] Info: Return code: 200
14:12:25:151 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:12:25:153 -> [Configure] Info: Parse configure success
14:12:25:153 -> [Configure] Info: Detected new firmware version: 3.1.9
14:12:25:155 -> state: 12
14:12:26:095 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:12:26:095 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":393,"boot":123,"bootCount":123}
14:12:26:095 -> [ApiClient] Info: Return code: 200
14:12:26:096 -> 
14:12:26:096 -> Online mode and isPostToAirGradient = true: watchdog reset
14:12:26:097 -> 
14:12:26:118 -> CO2 (ppm): 401
14:12:26:143 -> External watchdog feed!
14:12:30:139 -> CO2 (ppm): 401
14:12:34:160 -> CO2 (ppm): 400
14:12:38:180 -> CO2 (ppm): 401
14:12:42:200 -> CO2 (ppm): 401
14:12:46:220 -> CO2 (ppm): 401
14:12:50:241 -> CO2 (ppm): 402
14:12:54:262 -> CO2 (ppm): 402
14:12:58:283 -> CO2 (ppm): 406
14:13:02:303 -> CO2 (ppm): 409
14:13:06:323 -> CO2 (ppm): 411
14:13:10:344 -> CO2 (ppm): 411
14:13:14:364 -> CO2 (ppm): 412
14:13:18:384 -> CO2 (ppm): 411
14:13:22:409 -> CO2 (ppm): 415
14:13:24:489 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:13:24:490 -> [Configure] Info: Parse configure success
14:13:24:490 -> [Configure] Info: co2CalibrationRequested: True
14:13:24:491 -> [Configure] Info: Detected new firmware version: 3.1.9
14:13:24:491 -> state: 12
14:13:24:491 -> [StateMachine] Info: CO2 Calibration
14:13:24:491 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:13:25:491 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:13:26:490 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:13:28:491 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:13:28:491 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:13:31:499 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:13:31:512 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:13:31:521 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:13:31:535 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:13:31:536 -> [StateMachine] Info: CO2 Calibration: success
14:13:32:535 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:13:32:544 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:13:32:556 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:13:32:556 -> Flags: 0
14:13:33:565 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:13:33:577 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:13:33:579 -> Flags: 0
14:13:34:586 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:13:34:598 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:13:34:598 -> Flags: 0
14:13:35:606 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:13:35:619 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:13:35:619 -> Flags: 0
14:13:36:628 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:13:36:640 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:13:36:641 -> Flags: 0
14:13:37:640 -> Calibration Timeout
14:13:37:640 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:13:40:209 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:13:40:210 -> [ApiClient] Info: Return code: 200
14:13:40:211 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:13:40:212 -> [Configure] Info: Parse configure success
14:13:40:213 -> [Configure] Info: Detected new firmware version: 3.1.9
14:13:40:215 -> state: 12
14:13:41:169 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:13:41:169 -> [ApiClient] Info: DATA: {"wifi":-51,"rco2":415,"boot":124,"bootCount":124}
14:13:41:169 -> [ApiClient] Info: Return code: 200
14:13:41:170 -> 
14:13:41:170 -> Online mode and isPostToAirGradient = true: watchdog reset
14:13:41:170 -> 
14:13:41:191 -> CO2 (ppm): 426
14:13:41:216 -> External watchdog feed!
14:13:45:212 -> CO2 (ppm): 422
14:13:49:232 -> CO2 (ppm): 418
14:13:53:252 -> CO2 (ppm): 416
14:13:57:272 -> CO2 (ppm): 414
14:14:01:292 -> CO2 (ppm): 412
14:14:05:313 -> CO2 (ppm): 410
14:14:09:334 -> CO2 (ppm): 408
14:14:13:355 -> CO2 (ppm): 406
14:14:17:375 -> CO2 (ppm): 405
14:14:21:395 -> CO2 (ppm): 403
14:14:25:416 -> CO2 (ppm): 403
14:14:29:437 -> CO2 (ppm): 403
14:14:33:457 -> CO2 (ppm): 434
14:14:37:478 -> CO2 (ppm): 529
14:14:39:660 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:14:39:661 -> [Configure] Info: Parse configure success
14:14:39:661 -> [Configure] Info: co2CalibrationRequested: True
14:14:39:662 -> [Configure] Info: Detected new firmware version: 3.1.9
14:14:39:662 -> state: 12
14:14:39:662 -> [StateMachine] Info: CO2 Calibration
14:14:39:662 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:14:40:661 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:14:41:661 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:14:42:661 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:14:43:661 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:14:46:670 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:14:46:683 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:14:46:692 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:14:46:706 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:14:46:707 -> [StateMachine] Info: CO2 Calibration: success
14:14:47:706 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:14:47:715 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:14:47:727 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:14:47:727 -> Flags: 0
14:14:48:735 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:14:48:748 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:14:48:749 -> Flags: 0
14:14:49:757 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:14:49:769 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:14:49:769 -> Flags: 0
14:14:50:778 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:14:50:790 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:14:50:790 -> Flags: 0
14:14:51:799 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:14:51:811 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:14:51:812 -> Flags: 0
14:14:52:811 -> Calibration Timeout
14:14:52:812 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:14:55:474 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:14:55:474 -> [ApiClient] Info: Return code: 200
14:14:55:475 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:14:55:476 -> [Configure] Info: Parse configure success
14:14:55:477 -> [Configure] Info: Detected new firmware version: 3.1.9
14:14:55:479 -> state: 12
14:14:56:409 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:14:56:409 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":529,"boot":125,"bootCount":125}
14:14:56:409 -> [ApiClient] Info: Return code: 200
14:14:56:410 -> 
14:14:56:410 -> Online mode and isPostToAirGradient = true: watchdog reset
14:14:56:410 -> 
14:14:56:432 -> CO2 (ppm): 801
14:14:56:457 -> External watchdog feed!
14:15:00:452 -> CO2 (ppm): 821
14:15:04:473 -> CO2 (ppm): 847
14:15:08:495 -> CO2 (ppm): 843
14:15:12:517 -> CO2 (ppm): 816
14:15:16:537 -> CO2 (ppm): 789
14:15:20:557 -> CO2 (ppm): 752
14:15:24:578 -> CO2 (ppm): 709
14:15:28:598 -> CO2 (ppm): 667
14:15:32:618 -> CO2 (ppm): 627
14:15:36:637 -> CO2 (ppm): 592
14:15:40:657 -> CO2 (ppm): 560
14:15:44:677 -> CO2 (ppm): 534
14:15:48:697 -> CO2 (ppm): 511
14:15:52:717 -> CO2 (ppm): 493
14:15:54:831 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:15:54:831 -> [Configure] Info: Parse configure success
14:15:54:832 -> [Configure] Info: co2CalibrationRequested: True
14:15:54:832 -> [Configure] Info: Detected new firmware version: 3.1.9
14:15:54:832 -> state: 12
14:15:54:833 -> [StateMachine] Info: CO2 Calibration
14:15:54:833 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:15:55:832 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:15:56:832 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:15:57:832 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:15:58:832 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:16:01:841 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:16:01:854 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:16:01:863 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:16:01:877 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:16:01:878 -> [StateMachine] Info: CO2 Calibration: success
14:16:02:877 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:16:02:886 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:16:02:899 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:16:02:899 -> Flags: 0
14:16:03:907 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:16:03:920 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:16:03:920 -> Flags: 0
14:16:04:929 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:16:04:941 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:16:04:941 -> Flags: 0
14:16:05:949 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:16:06:018 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:16:06:018 -> Flags: 0
14:16:07:026 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:16:07:039 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:16:07:039 -> Flags: 0
14:16:08:039 -> Calibration Timeout
14:16:08:039 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:16:10:635 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:16:10:635 -> [ApiClient] Info: Return code: 200
14:16:10:637 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:16:10:638 -> [Configure] Info: Parse configure success
14:16:10:639 -> [Configure] Info: Detected new firmware version: 3.1.9
14:16:10:641 -> state: 12
14:16:11:661 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:16:11:661 -> [ApiClient] Info: DATA: {"wifi":-54,"rco2":493,"boot":126,"bootCount":126}
14:16:11:661 -> [ApiClient] Info: Return code: 200
14:16:11:662 -> 
14:16:11:663 -> Online mode and isPostToAirGradient = true: watchdog reset
14:16:11:663 -> 
14:16:11:684 -> CO2 (ppm): 443
14:16:11:709 -> External watchdog feed!
14:16:15:704 -> CO2 (ppm): 437
14:16:19:725 -> CO2 (ppm): 432
14:16:23:746 -> CO2 (ppm): 428
14:16:27:767 -> CO2 (ppm): 425
14:16:31:788 -> CO2 (ppm): 421
14:16:35:809 -> CO2 (ppm): 417
14:16:39:829 -> CO2 (ppm): 414
14:16:43:850 -> CO2 (ppm): 433
14:16:47:870 -> CO2 (ppm): 441
14:16:51:890 -> CO2 (ppm): 444
14:16:59:932 -> CO2 (ppm): 444
14:16:59:932 -> CO2 (ppm): 449
14:17:03:952 -> CO2 (ppm): 452
14:17:07:973 -> CO2 (ppm): 456
14:17:10:063 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:17:10:064 -> [Configure] Info: Parse configure success
14:17:10:064 -> [Configure] Info: co2CalibrationRequested: True
14:17:10:064 -> [Configure] Info: Detected new firmware version: 3.1.9
14:17:10:065 -> state: 12
14:17:10:065 -> [StateMachine] Info: CO2 Calibration
14:17:10:065 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:17:11:064 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:17:12:064 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:17:13:064 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:17:14:064 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:17:17:072 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:17:17:086 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:17:17:095 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:17:17:109 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:17:17:109 -> [StateMachine] Info: CO2 Calibration: success
14:17:18:109 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:17:18:117 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:17:18:130 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:17:18:130 -> Flags: 0
14:17:19:138 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:17:19:151 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:17:19:151 -> Flags: 0
14:17:20:159 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:17:20:172 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:17:20:172 -> Flags: 0
14:17:21:180 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:17:21:193 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:17:21:193 -> Flags: 0
14:17:22:201 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:17:22:214 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:17:22:214 -> Flags: 0
14:17:23:214 -> Calibration Timeout
14:17:23:214 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:17:25:795 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:17:25:795 -> [ApiClient] Info: Return code: 200
14:17:25:797 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:17:25:798 -> [Configure] Info: Parse configure success
14:17:25:799 -> [Configure] Info: Detected new firmware version: 3.1.9
14:17:25:801 -> state: 12
14:17:26:731 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:17:26:731 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":456,"boot":127,"bootCount":127}
14:17:26:731 -> [ApiClient] Info: Return code: 200
14:17:26:754 -> 
14:17:26:754 -> Online mode and isPostToAirGradient = true: watchdog reset
14:17:26:754 -> 
14:17:26:754 -> CO2 (ppm): 743
14:17:26:779 -> External watchdog feed!
14:17:30:775 -> CO2 (ppm): 775
14:17:34:796 -> CO2 (ppm): 771
14:17:38:817 -> CO2 (ppm): 751
14:17:42:838 -> CO2 (ppm): 723
14:17:46:858 -> CO2 (ppm): 702
14:17:50:878 -> CO2 (ppm): 677
14:17:54:898 -> CO2 (ppm): 647
14:17:58:920 -> CO2 (ppm): 633
14:18:02:940 -> CO2 (ppm): 609
14:18:06:961 -> CO2 (ppm): 587
14:18:10:982 -> CO2 (ppm): 566
14:18:15:003 -> CO2 (ppm): 546
14:18:19:023 -> CO2 (ppm): 526
14:18:23:044 -> CO2 (ppm): 508
14:18:25:235 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:18:25:235 -> [Configure] Info: Parse configure success
14:18:25:236 -> [Configure] Info: co2CalibrationRequested: True
14:18:25:236 -> [Configure] Info: Detected new firmware version: 3.1.9
14:18:25:236 -> state: 12
14:18:25:237 -> [StateMachine] Info: CO2 Calibration
14:18:25:237 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:18:26:236 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:18:27:236 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:18:28:236 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:18:29:236 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:18:32:245 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:18:32:258 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:18:32:267 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:18:32:281 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:18:32:281 -> [StateMachine] Info: CO2 Calibration: success
14:18:33:281 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:18:33:289 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:18:33:302 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:18:33:302 -> Flags: 0
14:18:34:310 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:18:34:323 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:18:34:323 -> Flags: 0
14:18:35:331 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:18:35:344 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:18:35:344 -> Flags: 0
14:18:36:352 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:18:36:365 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:18:36:365 -> Flags: 0
14:18:37:373 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:18:37:386 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:18:37:386 -> Flags: 0
14:18:38:386 -> Calibration Timeout
14:18:38:386 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:18:41:059 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:18:41:059 -> [ApiClient] Info: Return code: 200
14:18:41:061 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:18:41:062 -> [Configure] Info: Parse configure success
14:18:41:063 -> [Configure] Info: Detected new firmware version: 3.1.9
14:18:41:065 -> state: 12
14:18:42:015 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:18:42:015 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":508,"boot":128,"bootCount":128}
14:18:42:015 -> [ApiClient] Info: Return code: 200
14:18:42:016 -> 
14:18:42:016 -> Online mode and isPostToAirGradient = true: watchdog reset
14:18:42:016 -> 
14:18:42:038 -> CO2 (ppm): 603
14:18:42:063 -> External watchdog feed!
14:18:46:058 -> CO2 (ppm): 592
14:18:50:079 -> CO2 (ppm): 573
14:18:54:100 -> CO2 (ppm): 553
14:18:58:120 -> CO2 (ppm): 536
14:19:06:161 -> CO2 (ppm): 520
14:19:06:161 -> CO2 (ppm): 504
14:19:10:182 -> CO2 (ppm): 487
14:19:14:202 -> CO2 (ppm): 474
14:19:18:222 -> CO2 (ppm): 462
14:19:26:263 -> CO2 (ppm): 451
14:19:26:263 -> CO2 (ppm): 442
14:19:30:283 -> CO2 (ppm): 434
14:19:34:304 -> CO2 (ppm): 427
14:19:38:325 -> CO2 (ppm): 421
14:19:40:405 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:19:40:406 -> [Configure] Info: Parse configure success
14:19:40:406 -> [Configure] Info: co2CalibrationRequested: True
14:19:40:407 -> [Configure] Info: Detected new firmware version: 3.1.9
14:19:40:407 -> state: 12
14:19:40:407 -> [StateMachine] Info: CO2 Calibration
14:19:40:407 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:19:41:408 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:19:42:407 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:19:43:407 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:19:44:407 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:19:47:415 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:19:47:428 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:19:47:437 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:19:47:451 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:19:47:452 -> [StateMachine] Info: CO2 Calibration: success
14:19:48:451 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:19:48:460 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:19:48:472 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:19:48:473 -> Flags: 0
14:19:49:481 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:19:49:493 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:19:49:493 -> Flags: 0
14:19:50:502 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:19:50:514 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:19:50:515 -> Flags: 0
14:19:51:523 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:19:51:535 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:19:51:535 -> Flags: 0
14:19:52:544 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:19:52:556 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:19:52:557 -> Flags: 0
14:19:53:556 -> Calibration Timeout
14:19:53:557 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:19:56:118 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:19:56:118 -> [ApiClient] Info: Return code: 200
14:19:56:119 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:19:56:121 -> [Configure] Info: Parse configure success
14:19:56:121 -> [Configure] Info: Detected new firmware version: 3.1.9
14:19:56:123 -> state: 12
14:19:57:074 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:19:57:074 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":421,"boot":129,"bootCount":129}
14:19:57:074 -> [ApiClient] Info: Return code: 200
14:19:57:075 -> 
14:19:57:075 -> Online mode and isPostToAirGradient = true: watchdog reset
14:19:57:075 -> 
14:19:57:097 -> CO2 (ppm): 407
14:19:57:122 -> External watchdog feed!
14:20:01:118 -> CO2 (ppm): 408
14:20:09:159 -> CO2 (ppm): 406
14:20:09:159 -> CO2 (ppm): 404
14:20:13:179 -> CO2 (ppm): 403
14:20:17:200 -> CO2 (ppm): 401
14:20:21:221 -> CO2 (ppm): 406
14:20:25:294 -> CO2 (ppm): 407
14:20:29:313 -> CO2 (ppm): 407
14:20:33:334 -> CO2 (ppm): 406
14:20:37:354 -> CO2 (ppm): 406
14:20:41:375 -> CO2 (ppm): 405
14:20:45:395 -> CO2 (ppm): 405
14:20:49:415 -> CO2 (ppm): 403
14:20:53:436 -> CO2 (ppm): 403
14:20:55:577 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:20:55:578 -> [Configure] Info: Parse configure success
14:20:55:578 -> [Configure] Info: co2CalibrationRequested: True
14:20:55:578 -> [Configure] Info: Detected new firmware version: 3.1.9
14:20:55:579 -> state: 12
14:20:55:579 -> [StateMachine] Info: CO2 Calibration
14:20:55:579 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:20:56:578 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:20:57:578 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:20:58:578 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:20:59:578 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:21:02:586 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:21:02:599 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:21:02:608 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:21:02:622 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:21:02:623 -> [StateMachine] Info: CO2 Calibration: success
14:21:03:623 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:21:03:631 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:21:03:643 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:21:03:644 -> Flags: 0
14:21:04:652 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:21:04:664 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:21:04:665 -> Flags: 0
14:21:05:673 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:21:05:685 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:21:05:686 -> Flags: 0
14:21:06:694 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:21:06:706 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:21:06:707 -> Flags: 0
14:21:07:715 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:21:07:727 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:21:07:728 -> Flags: 0
14:21:08:727 -> Calibration Timeout
14:21:08:728 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:21:11:381 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:21:11:381 -> [ApiClient] Info: Return code: 200
14:21:11:382 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:21:11:384 -> [Configure] Info: Parse configure success
14:21:11:384 -> [Configure] Info: Detected new firmware version: 3.1.9
14:21:11:386 -> state: 12
14:21:12:306 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:21:12:306 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":403,"boot":130,"bootCount":130}
14:21:12:306 -> [ApiClient] Info: Return code: 200
14:21:12:308 -> 
14:21:12:308 -> Online mode and isPostToAirGradient = true: watchdog reset
14:21:12:308 -> 
14:21:12:329 -> CO2 (ppm): 465
14:21:12:353 -> External watchdog feed!
14:21:16:349 -> CO2 (ppm): 482
14:21:20:369 -> CO2 (ppm): 487
14:21:24:389 -> CO2 (ppm): 486
14:21:28:410 -> CO2 (ppm): 482
14:21:32:431 -> CO2 (ppm): 474
14:21:36:452 -> CO2 (ppm): 465
14:21:40:473 -> CO2 (ppm): 457
14:21:44:493 -> CO2 (ppm): 450
14:21:48:514 -> CO2 (ppm): 443
14:21:52:535 -> CO2 (ppm): 436
14:21:56:557 -> CO2 (ppm): 431
14:22:04:599 -> CO2 (ppm): 426
14:22:04:599 -> CO2 (ppm): 422
14:22:08:620 -> CO2 (ppm): 419
14:22:10:748 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:22:10:748 -> [Configure] Info: Parse configure success
14:22:10:748 -> [Configure] Info: co2CalibrationRequested: True
14:22:10:749 -> [Configure] Info: Detected new firmware version: 3.1.9
14:22:10:749 -> state: 12
14:22:10:749 -> [StateMachine] Info: CO2 Calibration
14:22:10:749 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:22:11:750 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:22:12:750 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:22:13:750 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:22:14:750 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:22:17:758 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:22:17:772 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:22:17:780 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:22:17:794 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:22:17:794 -> [StateMachine] Info: CO2 Calibration: success
14:22:18:794 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:22:18:802 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:22:18:816 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:22:18:816 -> Flags: 0
14:22:19:824 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:22:19:836 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:22:19:837 -> Flags: 0
14:22:20:845 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:22:20:857 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:22:20:858 -> Flags: 0
14:22:21:866 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:22:21:878 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:22:21:879 -> Flags: 0
14:22:22:887 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:22:22:899 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:22:22:900 -> Flags: 0
14:22:23:899 -> Calibration Timeout
14:22:23:900 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:22:26:543 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:22:26:543 -> [ApiClient] Info: Return code: 200
14:22:26:544 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:22:26:546 -> [Configure] Info: Parse configure success
14:22:26:547 -> [Configure] Info: Detected new firmware version: 3.1.9
14:22:26:548 -> state: 12
14:22:27:491 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:22:27:491 -> [ApiClient] Info: DATA: {"wifi":-52,"rco2":419,"boot":131,"bootCount":131}
14:22:27:492 -> [ApiClient] Info: Return code: 200
14:22:27:493 -> 
14:22:27:493 -> Online mode and isPostToAirGradient = true: watchdog reset
14:22:27:493 -> 
14:22:27:514 -> CO2 (ppm): 405
14:22:27:539 -> External watchdog feed!
14:22:31:535 -> CO2 (ppm): 405
14:22:35:555 -> CO2 (ppm): 404
14:22:39:576 -> CO2 (ppm): 403
14:22:43:596 -> CO2 (ppm): 402
14:22:47:617 -> CO2 (ppm): 404
14:22:51:638 -> CO2 (ppm): 409
14:22:55:658 -> CO2 (ppm): 421
14:22:59:679 -> CO2 (ppm): 432
14:23:03:699 -> CO2 (ppm): 437
14:23:07:720 -> CO2 (ppm): 439
14:23:11:741 -> CO2 (ppm): 440
14:23:15:762 -> CO2 (ppm): 440
14:23:19:783 -> CO2 (ppm): 438
14:23:23:804 -> CO2 (ppm): 435
14:23:25:919 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:23:25:920 -> [Configure] Info: Parse configure success
14:23:25:920 -> [Configure] Info: co2CalibrationRequested: True
14:23:25:921 -> [Configure] Info: Detected new firmware version: 3.1.9
14:23:25:921 -> state: 12
14:23:25:921 -> [StateMachine] Info: CO2 Calibration
14:23:25:921 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:23:26:920 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:23:27:920 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:23:28:921 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:23:29:921 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:23:32:929 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:23:32:942 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:23:32:951 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:23:32:965 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:23:32:966 -> [StateMachine] Info: CO2 Calibration: success
14:23:33:965 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:23:33:974 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:23:33:987 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:23:33:988 -> Flags: 0
14:23:34:996 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:23:35:008 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:23:35:009 -> Flags: 0
14:23:36:017 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:23:36:029 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:23:36:030 -> Flags: 0
14:23:37:038 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:23:37:050 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:23:37:050 -> Flags: 0
14:23:38:059 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:23:38:071 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:23:38:072 -> Flags: 0
14:23:39:071 -> Calibration Timeout
14:23:39:072 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:23:41:704 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:23:41:704 -> [ApiClient] Info: Return code: 200
14:23:41:705 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:23:41:706 -> [Configure] Info: Parse configure success
14:23:41:707 -> [Configure] Info: Detected new firmware version: 3.1.9
14:23:41:709 -> state: 12
14:23:42:650 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:23:42:650 -> [ApiClient] Info: DATA: {"wifi":-53,"rco2":435,"boot":132,"bootCount":132}
14:23:42:650 -> [ApiClient] Info: Return code: 200
14:23:42:651 -> 
14:23:42:651 -> Online mode and isPostToAirGradient = true: watchdog reset
14:23:42:651 -> 
14:23:42:673 -> CO2 (ppm): 422
14:23:42:698 -> External watchdog feed!
14:23:46:694 -> CO2 (ppm): 419
14:23:50:714 -> CO2 (ppm): 433
14:23:54:735 -> CO2 (ppm): 455
14:23:58:755 -> CO2 (ppm): 465
14:24:02:776 -> CO2 (ppm): 468
14:24:06:797 -> CO2 (ppm): 469
14:24:10:824 -> CO2 (ppm): 467
14:24:14:838 -> CO2 (ppm): 462
14:24:22:879 -> CO2 (ppm): 455
14:24:22:879 -> CO2 (ppm): 449
14:24:26:900 -> CO2 (ppm): 443
14:24:30:921 -> CO2 (ppm): 437
14:24:34:941 -> CO2 (ppm): 431
14:24:38:962 -> CO2 (ppm): 426
14:24:41:091 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:24:41:092 -> [Configure] Info: Parse configure success
14:24:41:092 -> [Configure] Info: co2CalibrationRequested: True
14:24:41:093 -> [Configure] Info: Detected new firmware version: 3.1.9
14:24:41:093 -> state: 12
14:24:41:093 -> [StateMachine] Info: CO2 Calibration
14:24:41:093 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:24:42:093 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:24:43:093 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:24:44:093 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:24:45:093 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:24:48:101 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:24:48:115 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:24:48:124 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:24:48:138 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:24:48:145 -> [StateMachine] Info: CO2 Calibration: success
14:24:49:138 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:24:49:147 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:24:49:159 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:24:49:160 -> Flags: 0
14:24:50:168 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:24:50:180 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:24:50:181 -> Flags: 0
14:24:51:189 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:24:51:201 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:24:51:201 -> Flags: 0
14:24:52:210 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:24:52:222 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:24:52:229 -> Flags: 0
14:24:53:231 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:24:53:243 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:24:53:244 -> Flags: 0
14:24:54:243 -> Calibration Timeout
14:24:54:244 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:24:56:867 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:24:56:867 -> [ApiClient] Info: Return code: 200
14:24:56:868 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:24:56:870 -> [Configure] Info: Parse configure success
14:24:56:870 -> [Configure] Info: Detected new firmware version: 3.1.9
14:24:56:872 -> state: 12
14:24:57:811 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:24:57:811 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":426,"boot":133,"bootCount":133}
14:24:57:811 -> [ApiClient] Info: Return code: 200
14:24:57:812 -> 
14:24:57:812 -> Online mode and isPostToAirGradient = true: watchdog reset
14:24:57:812 -> 
14:24:57:833 -> CO2 (ppm): 472
14:24:57:858 -> External watchdog feed!
14:25:01:853 -> CO2 (ppm): 503
14:25:05:874 -> CO2 (ppm): 528
14:25:09:895 -> CO2 (ppm): 542
14:25:13:916 -> CO2 (ppm): 546
14:25:17:937 -> CO2 (ppm): 539
14:25:21:957 -> CO2 (ppm): 529
14:25:25:978 -> CO2 (ppm): 515
14:25:29:998 -> CO2 (ppm): 501
14:25:34:019 -> CO2 (ppm): 487
14:25:38:039 -> CO2 (ppm): 476
14:25:42:059 -> CO2 (ppm): 464
14:25:46:079 -> CO2 (ppm): 455
14:25:50:099 -> CO2 (ppm): 447
14:25:54:121 -> CO2 (ppm): 439
14:25:56:263 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":true,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:25:56:270 -> [Configure] Info: Parse configure success
14:25:56:270 -> [Configure] Info: co2CalibrationRequested: True
14:25:56:270 -> [Configure] Info: Detected new firmware version: 3.1.9
14:25:56:270 -> state: 12
14:25:56:270 -> [StateMachine] Info: CO2 Calibration
14:25:56:270 -> [StateMachine] Info: Start CO2 calib after 5 sec
14:25:57:265 -> [StateMachine] Info: Start CO2 calib after 4 sec
14:25:58:265 -> [StateMachine] Info: Start CO2 calib after 3 sec
14:25:59:265 -> [StateMachine] Info: Start CO2 calib after 2 sec
14:26:00:265 -> [StateMachine] Info: Start CO2 calib after 1 sec
14:26:03:273 -> Clear Acknowledgement Command >   0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:26:03:286 -> Clear Acknowledgement Response >  0xFE  0x06  0x00  0x00  0x00  0x00  0x9D  0xC5 
14:26:03:295 -> Send Calibration Command >   0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:26:03:309 -> Send Calibration Response >  0xFE  0x06  0x00  0x01  0x7C  0x06  0x6C  0xC7 
14:26:03:309 -> [StateMachine] Info: CO2 Calibration: success
14:26:04:310 -> [StateMachine] Info: CO2 Calibration: Wait for calibration finish...
14:26:04:318 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:26:04:331 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:26:04:332 -> Flags: 0
14:26:05:340 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:26:05:352 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:26:05:353 -> Flags: 0
14:26:06:361 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:26:06:373 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:26:06:374 -> Flags: 0
14:26:07:382 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:26:07:394 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:26:07:394 -> Flags: 0
14:26:08:403 -> Get Acknowledgement Command >   0xFE  0x03  0x00  0x00  0x00  0x01  0x90  0x05 
14:26:08:415 -> Get Acknowledgement Response >  0xFE  0x03  0x02  0x00  0x00  0xAC  0x50 
14:26:08:415 -> Flags: 0
14:26:09:415 -> Calibration Timeout
14:26:09:416 -> [StateMachine] Info: CO2 Calibration: finish after 5 sec
14:26:12:037 -> [ApiClient] Info: GET: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/one/config
14:26:12:038 -> [ApiClient] Info: Return code: 200
14:26:12:039 -> [Configure] Info: Parse configure: {"country":"CH","pmStandard":"ugm3","co2CalibrationRequested":false,"ledBarTestRequested":false,"ledBarMode":"pm","displayMode":"on","placeOpen":true,"abcDays":8,"tvocLearningOffset":12,"noxLearningOffset":12,"temperatureUnit":"c","targetFirmware":"3.1.9","ledBarBrightness":100,"displayBrightness":100,"corrections":{"pm02":{"correctionAlgorithm":"none","slr":null}},"model":"O-1PST"}
14:26:12:040 -> [Configure] Info: Parse configure success
14:26:12:041 -> [Configure] Info: Detected new firmware version: 3.1.9
14:26:12:043 -> state: 12
14:26:12:962 -> [ApiClient] Info: POST: http://hw.airgradient.com/sensors/airgradient:d83bda1b86c8/measures
14:26:12:962 -> [ApiClient] Info: DATA: {"wifi":-55,"rco2":439,"boot":134,"bootCount":134}
14:26:12:963 -> [ApiClient] Info: Return code: 200
14:26:12:963 -> 
14:26:12:963 -> Online mode and isPostToAirGradient = true: watchdog reset
14:26:12:964 -> 
14:26:12:985 -> CO2 (ppm): 414
14:26:13:010 -> External watchdog feed!
14:26:17:006 -> CO2 (ppm): 412
14:26:21:028 -> CO2 (ppm): 410
14:26:25:048 -> CO2 (ppm): 408
14:26:29:073 -> CO2 (ppm): 406
14:26:33:088 -> CO2 (ppm): 405
14:26:37:108 -> CO2 (ppm): 404
14:26:41:129 -> CO2 (ppm): 405
14:26:45:149 -> CO2 (ppm): 405
14:26:49:170 -> CO2 (ppm): 403
14:26:53:190 -> CO2 (ppm): 404
14:26:57:211 -> CO2 (ppm): 403
14:27:01:231 -> CO2 (ppm): 403
