Update IDF to a0468b2 (#2108)

* Update IDF to a0468b2

* add missing ld file

* Fix PIO builds and change coex policy

tools/sdk/include/freemodbus/mbframe.h

@@ -0,0 +1,87 @@
+/* 
+ * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
+ * Copyright (c) 2006 Christian Walter <wolti@sil.at>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * File: $Id: mbframe.h,v 1.9 2006/12/07 22:10:34 wolti Exp $
+ */
+
+#ifndef _MB_FRAME_H
+#define _MB_FRAME_H
+
+#ifdef __cplusplus
+PR_BEGIN_EXTERN_C
+#endif
+
+/*!
+ * Constants which defines the format of a modbus frame. The example is
+ * shown for a Modbus RTU/ASCII frame. Note that the Modbus PDU is not
+ * dependent on the underlying transport.
+ *
+ * <code>
+ * <------------------------ MODBUS SERIAL LINE PDU (1) ------------------->
+ *              <----------- MODBUS PDU (1') ---------------->
+ *  +-----------+---------------+----------------------------+-------------+
+ *  | Address   | Function Code | Data                       | CRC/LRC     |
+ *  +-----------+---------------+----------------------------+-------------+
+ *  |           |               |                                   |
+ * (2)        (3/2')           (3')                                (4)
+ *
+ * (1)  ... MB_SER_PDU_SIZE_MAX = 256
+ * (2)  ... MB_SER_PDU_ADDR_OFF = 0
+ * (3)  ... MB_SER_PDU_PDU_OFF  = 1
+ * (4)  ... MB_SER_PDU_SIZE_CRC = 2
+ *
+ * (1') ... MB_PDU_SIZE_MAX     = 253
+ * (2') ... MB_PDU_FUNC_OFF     = 0
+ * (3') ... MB_PDU_DATA_OFF     = 1
+ * </code>
+ */
+
+/* ----------------------- Defines ------------------------------------------*/
+#define MB_PDU_SIZE_MAX     253 /*!< Maximum size of a PDU. */
+#define MB_PDU_SIZE_MIN     1   /*!< Function Code */
+#define MB_PDU_FUNC_OFF     0   /*!< Offset of function code in PDU. */
+#define MB_PDU_DATA_OFF     1   /*!< Offset for response data in PDU. */
+
+/* ----------------------- Prototypes  0-------------------------------------*/
+typedef void    ( *pvMBFrameStart ) ( void );
+
+typedef void    ( *pvMBFrameStop ) ( void );
+
+typedef eMBErrorCode( *peMBFrameReceive ) ( UCHAR * pucRcvAddress,
+                                            UCHAR ** pucFrame,
+                                            USHORT * pusLength );
+
+typedef eMBErrorCode( *peMBFrameSend ) ( UCHAR slaveAddress,
+                                         const UCHAR * pucFrame,
+                                         USHORT usLength );
+
+typedef void( *pvMBFrameClose ) ( void );
+
+#ifdef __cplusplus
+PR_END_EXTERN_C
+#endif
+#endif