feedc0de/arduino-esp32
1
0
Fork 0
forked from espressif/arduino-esp32
Code Pull Requests Activity

Initial Commit

Browse Source
This commit is contained in:
me-no-dev
2020-05-09 19:11:30 +03:00
parent ebe0d9a6cb
commit 0a262244e6
4324 changed files with 645232 additions and 253864 deletions
Download Patch File Download Diff File Expand all files Collapse all files

69
tools/sdk/esp32/include/efuse/esp32/include/esp_efuse_table.h Normal file
View File

@ -0,0 +1,69 @@
// Copyright 2017-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at",
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License
#ifdef __cplusplus
extern "C" {
#endif
// md5_digest_table 2e23344575b3d07f01ecb695294e9770
// This file was generated from the file esp_efuse_table.csv. DO NOT CHANGE THIS FILE MANUALLY.
// If you want to change some fields, you need to change esp_efuse_table.csv file
// then run `efuse_common_table` or `efuse_custom_table` command it will generate this file.
// To show efuse_table run the command 'show_efuse_table'.
extern const esp_efuse_desc_t* ESP_EFUSE_MAC_FACTORY[];
extern const esp_efuse_desc_t* ESP_EFUSE_MAC_FACTORY_CRC[];
extern const esp_efuse_desc_t* ESP_EFUSE_MAC_CUSTOM_CRC[];
extern const esp_efuse_desc_t* ESP_EFUSE_MAC_CUSTOM[];
extern const esp_efuse_desc_t* ESP_EFUSE_MAC_CUSTOM_VER[];
extern const esp_efuse_desc_t* ESP_EFUSE_SECURE_BOOT_KEY[];
extern const esp_efuse_desc_t* ESP_EFUSE_ABS_DONE_0[];
extern const esp_efuse_desc_t* ESP_EFUSE_ENCRYPT_FLASH_KEY[];
extern const esp_efuse_desc_t* ESP_EFUSE_ENCRYPT_CONFIG[];
extern const esp_efuse_desc_t* ESP_EFUSE_DISABLE_DL_ENCRYPT[];
extern const esp_efuse_desc_t* ESP_EFUSE_DISABLE_DL_DECRYPT[];
extern const esp_efuse_desc_t* ESP_EFUSE_DISABLE_DL_CACHE[];
extern const esp_efuse_desc_t* ESP_EFUSE_DISABLE_JTAG[];
extern const esp_efuse_desc_t* ESP_EFUSE_CONSOLE_DEBUG_DISABLE[];
extern const esp_efuse_desc_t* ESP_EFUSE_FLASH_CRYPT_CNT[];
extern const esp_efuse_desc_t* ESP_EFUSE_WR_DIS_FLASH_CRYPT_CNT[];
extern const esp_efuse_desc_t* ESP_EFUSE_WR_DIS_BLK1[];
extern const esp_efuse_desc_t* ESP_EFUSE_WR_DIS_BLK2[];
extern const esp_efuse_desc_t* ESP_EFUSE_WR_DIS_BLK3[];
extern const esp_efuse_desc_t* ESP_EFUSE_RD_DIS_BLK1[];
extern const esp_efuse_desc_t* ESP_EFUSE_RD_DIS_BLK2[];
extern const esp_efuse_desc_t* ESP_EFUSE_RD_DIS_BLK3[];
extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_VER_DIS_APP_CPU[];
extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_VER_DIS_BT[];
extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_VER_PKG[];
extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_CPU_FREQ_LOW[];
extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_CPU_FREQ_RATED[];
extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_VER_REV1[];
extern const esp_efuse_desc_t* ESP_EFUSE_CHIP_VER_REV2[];
extern const esp_efuse_desc_t* ESP_EFUSE_XPD_SDIO_REG[];
extern const esp_efuse_desc_t* ESP_EFUSE_SDIO_TIEH[];
extern const esp_efuse_desc_t* ESP_EFUSE_SDIO_FORCE[];
extern const esp_efuse_desc_t* ESP_EFUSE_ADC_VREF_AND_SDIO_DREF[];
extern const esp_efuse_desc_t* ESP_EFUSE_ADC1_TP_LOW[];
extern const esp_efuse_desc_t* ESP_EFUSE_ADC2_TP_LOW[];
extern const esp_efuse_desc_t* ESP_EFUSE_ADC1_TP_HIGH[];
extern const esp_efuse_desc_t* ESP_EFUSE_ADC2_TP_HIGH[];
extern const esp_efuse_desc_t* ESP_EFUSE_SECURE_VERSION[];
#ifdef __cplusplus
}
#endif

44
tools/sdk/esp32/include/efuse/include/esp32/esp_efuse.h Normal file
View File

@ -0,0 +1,44 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Type of eFuse blocks for ESP32
*/
typedef enum {
EFUSE_BLK0 = 0, /**< Number of eFuse block. Reserved. */
EFUSE_BLK1 = 1, /**< Number of eFuse block. Used for Flash Encryption. If not using that Flash Encryption feature, they can be used for another purpose. */
EFUSE_BLK2 = 2, /**< Number of eFuse block. Used for Secure Boot. If not using that Secure Boot feature, they can be used for another purpose. */
EFUSE_BLK3 = 3, /**< Number of eFuse block. Uses for the purpose of the user. */
EFUSE_BLK_MAX
} esp_efuse_block_t;
/**
* @brief Type of coding scheme
*/
typedef enum {
EFUSE_CODING_SCHEME_NONE = 0, /**< None */
EFUSE_CODING_SCHEME_3_4 = 1, /**< 3/4 coding */
EFUSE_CODING_SCHEME_REPEAT = 2, /**< Repeat coding */
} esp_efuse_coding_scheme_t;
#ifdef __cplusplus
}
#endif

77
tools/sdk/esp32/include/efuse/include/esp32s2/esp_efuse.h Normal file
View File

@ -0,0 +1,77 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Type of eFuse blocks ESP32S2
*/
typedef enum {
EFUSE_BLK0 = 0, /**< Number of eFuse BLOCK0. REPEAT_DATA */
EFUSE_BLK1 = 1, /**< Number of eFuse BLOCK1. MAC_SPI_8M_SYS */
EFUSE_BLK2 = 2, /**< Number of eFuse BLOCK2. SYS_DATA_PART1 */
EFUSE_BLK_SYS_DATA_PART1 = 2, /**< Number of eFuse BLOCK2. SYS_DATA_PART1 */
EFUSE_BLK3 = 3, /**< Number of eFuse BLOCK3. USER_DATA*/
EFUSE_BLK_USER_DATA = 3, /**< Number of eFuse BLOCK3. USER_DATA*/
EFUSE_BLK4 = 4, /**< Number of eFuse BLOCK4. KEY0 */
EFUSE_BLK_KEY0 = 4, /**< Number of eFuse BLOCK4. KEY0 */
EFUSE_BLK5 = 5, /**< Number of eFuse BLOCK5. KEY1 */
EFUSE_BLK_KEY1 = 5, /**< Number of eFuse BLOCK5. KEY1 */
EFUSE_BLK6 = 6, /**< Number of eFuse BLOCK6. KEY2 */
EFUSE_BLK_KEY2 = 6, /**< Number of eFuse BLOCK6. KEY2 */
EFUSE_BLK7 = 7, /**< Number of eFuse BLOCK7. KEY3 */
EFUSE_BLK_KEY3 = 7, /**< Number of eFuse BLOCK7. KEY3 */
EFUSE_BLK8 = 8, /**< Number of eFuse BLOCK8. KEY4 */
EFUSE_BLK_KEY4 = 8, /**< Number of eFuse BLOCK8. KEY4 */
EFUSE_BLK9 = 9, /**< Number of eFuse BLOCK9. KEY5 */
EFUSE_BLK_KEY5 = 9, /**< Number of eFuse BLOCK9. KEY5 */
EFUSE_BLK10 = 10, /**< Number of eFuse BLOCK10. SYS_DATA_PART2 */
EFUSE_BLK_SYS_DATA_PART2 = 10, /**< Number of eFuse BLOCK10. SYS_DATA_PART2 */
EFUSE_BLK_MAX
} esp_efuse_block_t;
struct esp_efuse_desc_s;
/**
* @brief Given a key block in the range EFUSE_BLK_KEY0..EFUSE_BLK_KEY5, return
* efuse field for setting the key purpose
*/
const struct esp_efuse_desc_s **esp_efuse_get_purpose_field(esp_efuse_block_t block);
/**
* @brief Type of coding scheme
*/
typedef enum {
EFUSE_CODING_SCHEME_NONE = 0, /**< None */
EFUSE_CODING_SCHEME_RS = 3, /**< Reed-Solomon coding */
} esp_efuse_coding_scheme_t;
#ifdef __cplusplus
}
#endif

395
tools/sdk/esp32/include/efuse/include/esp_efuse.h Normal file
View File

@ -0,0 +1,395 @@
// Copyright 2017-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
#include "esp_err.h"
#include "esp_log.h"
#include "sdkconfig.h"
#if CONFIG_IDF_TARGET_ESP32
#include "esp32/esp_efuse.h"
#elif CONFIG_IDF_TARGET_ESP32S2
#include "esp32s2/esp_efuse.h"
#endif
#define ESP_ERR_EFUSE 0x1600 /*!< Base error code for efuse api. */
#define ESP_OK_EFUSE_CNT (ESP_ERR_EFUSE + 0x01) /*!< OK the required number of bits is set. */
#define ESP_ERR_EFUSE_CNT_IS_FULL (ESP_ERR_EFUSE + 0x02) /*!< Error field is full. */
#define ESP_ERR_EFUSE_REPEATED_PROG (ESP_ERR_EFUSE + 0x03) /*!< Error repeated programming of programmed bits is strictly forbidden. */
#define ESP_ERR_CODING (ESP_ERR_EFUSE + 0x04) /*!< Error while a encoding operation. */
/**
* @brief Structure eFuse field
*/
struct esp_efuse_desc_s {
esp_efuse_block_t efuse_block: 8; /**< Block of eFuse */
uint8_t bit_start; /**< Start bit [0..255] */
uint16_t bit_count; /**< Length of bit field [1..-]*/
};
/**
* @brief Type definition for an eFuse field
*/
typedef struct esp_efuse_desc_s esp_efuse_desc_t;
/**
* @brief Reads bits from EFUSE field and writes it into an array.
*
* The number of read bits will be limited to the minimum value
* from the description of the bits in "field" structure or "dst_size_bits" required size.
* Use "esp_efuse_get_field_size()" function to determine the length of the field.
* @param[in] field A pointer to the structure describing the fields of efuse.
* @param[out] dst A pointer to array that will contain the result of reading.
* @param[in] dst_size_bits The number of bits required to read.
* If the requested number of bits is greater than the field,
* the number will be limited to the field size.
*
* @return
* - ESP_OK: The operation was successfully completed.
* - ESP_ERR_INVALID_ARG: Error in the passed arguments.
*/
esp_err_t esp_efuse_read_field_blob(const esp_efuse_desc_t* field[], void* dst, size_t dst_size_bits);
/**
* @brief Reads bits from EFUSE field and returns number of bits programmed as "1".
*
* If the bits are set not sequentially, they will still be counted.
* @param[in] field A pointer to the structure describing the fields of efuse.
* @param[out] out_cnt A pointer that will contain the number of programmed as "1" bits.
*
* @return
* - ESP_OK: The operation was successfully completed.
* - ESP_ERR_INVALID_ARG: Error in the passed arguments.
*/
esp_err_t esp_efuse_read_field_cnt(const esp_efuse_desc_t* field[], size_t* out_cnt);
/**
* @brief Writes array to EFUSE field.
*
* The number of write bits will be limited to the minimum value
* from the description of the bits in "field" structure or "src_size_bits" required size.
* Use "esp_efuse_get_field_size()" function to determine the length of the field.
* After the function is completed, the writing registers are cleared.
* @param[in] field A pointer to the structure describing the fields of efuse.
* @param[in] src A pointer to array that contains the data for writing.
* @param[in] src_size_bits The number of bits required to write.
*
* @return
* - ESP_OK: The operation was successfully completed.
* - ESP_ERR_INVALID_ARG: Error in the passed arguments.
* - ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
* - ESP_ERR_CODING: Error range of data does not match the coding scheme.
*/
esp_err_t esp_efuse_write_field_blob(const esp_efuse_desc_t* field[], const void* src, size_t src_size_bits);
/**
* @brief Writes a required count of bits as "1" to EFUSE field.
*
* If there are no free bits in the field to set the required number of bits to "1",
* ESP_ERR_EFUSE_CNT_IS_FULL error is returned, the field will not be partially recorded.
* After the function is completed, the writing registers are cleared.
* @param[in] field A pointer to the structure describing the fields of efuse.
* @param[in] cnt Required number of programmed as "1" bits.
*
* @return
* - ESP_OK: The operation was successfully completed.
* - ESP_ERR_INVALID_ARG: Error in the passed arguments.
* - ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set.
*/
esp_err_t esp_efuse_write_field_cnt(const esp_efuse_desc_t* field[], size_t cnt);
/**
* @brief Sets a write protection for the whole block.
*
* After that, it is impossible to write to this block.
* The write protection does not apply to block 0.
* @param[in] blk Block number of eFuse. (EFUSE_BLK1, EFUSE_BLK2 and EFUSE_BLK3)
*
* @return
* - ESP_OK: The operation was successfully completed.
* - ESP_ERR_INVALID_ARG: Error in the passed arguments.
* - ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set.
* - ESP_ERR_NOT_SUPPORTED: The block does not support this command.
*/
esp_err_t esp_efuse_set_write_protect(esp_efuse_block_t blk);
/**
* @brief Sets a read protection for the whole block.
*
* After that, it is impossible to read from this block.
* The read protection does not apply to block 0.
* @param[in] blk Block number of eFuse. (EFUSE_BLK1, EFUSE_BLK2 and EFUSE_BLK3)
*
* @return
* - ESP_OK: The operation was successfully completed.
* - ESP_ERR_INVALID_ARG: Error in the passed arguments.
* - ESP_ERR_EFUSE_CNT_IS_FULL: Not all requested cnt bits is set.
* - ESP_ERR_NOT_SUPPORTED: The block does not support this command.
*/
esp_err_t esp_efuse_set_read_protect(esp_efuse_block_t blk);
/**
* @brief Returns the number of bits used by field.
*
* @param[in] field A pointer to the structure describing the fields of efuse.
*
* @return Returns the number of bits used by field.
*/
int esp_efuse_get_field_size(const esp_efuse_desc_t* field[]);
/**
* @brief Returns value of efuse register.
*
* This is a thread-safe implementation.
* Example: EFUSE_BLK2_RDATA3_REG where (blk=2, num_reg=3)
* @param[in] blk Block number of eFuse.
* @param[in] num_reg The register number in the block.
*
* @return Value of register
*/
uint32_t esp_efuse_read_reg(esp_efuse_block_t blk, unsigned int num_reg);
/**
* @brief Write value to efuse register.
*
* Apply a coding scheme if necessary.
* This is a thread-safe implementation.
* Example: EFUSE_BLK3_WDATA0_REG where (blk=3, num_reg=0)
* @param[in] blk Block number of eFuse.
* @param[in] num_reg The register number in the block.
* @param[in] val Value to write.
*
* @return
* - ESP_OK: The operation was successfully completed.
* - ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits is strictly forbidden.
*/
esp_err_t esp_efuse_write_reg(esp_efuse_block_t blk, unsigned int num_reg, uint32_t val);
/**
* @brief Return efuse coding scheme for blocks.
*
* Note: The coding scheme is applicable only to 1, 2 and 3 blocks. For 0 block, the coding scheme is always ``NONE``.
*
* @param[in] blk Block number of eFuse.
* @return Return efuse coding scheme for blocks
*/
esp_efuse_coding_scheme_t esp_efuse_get_coding_scheme(esp_efuse_block_t blk);
/**
* @brief Read key to efuse block starting at the offset and the required size.
*
* @param[in] blk Block number of eFuse.
* @param[in] dst_key A pointer to array that will contain the result of reading.
* @param[in] offset_in_bits Start bit in block.
* @param[in] size_bits The number of bits required to read.
*
* @return
* - ESP_OK: The operation was successfully completed.
* - ESP_ERR_INVALID_ARG: Error in the passed arguments.
* - ESP_ERR_CODING: Error range of data does not match the coding scheme.
*/
esp_err_t esp_efuse_read_block(esp_efuse_block_t blk, void* dst_key, size_t offset_in_bits, size_t size_bits);
/**
* @brief Write key to efuse block starting at the offset and the required size.
*
* @param[in] blk Block number of eFuse.
* @param[in] src_key A pointer to array that contains the key for writing.
* @param[in] offset_in_bits Start bit in block.
* @param[in] size_bits The number of bits required to write.
*
* @return
* - ESP_OK: The operation was successfully completed.
* - ESP_ERR_INVALID_ARG: Error in the passed arguments.
* - ESP_ERR_CODING: Error range of data does not match the coding scheme.
* - ESP_ERR_EFUSE_REPEATED_PROG: Error repeated programming of programmed bits
*/
esp_err_t esp_efuse_write_block(esp_efuse_block_t blk, const void* src_key, size_t offset_in_bits, size_t size_bits);
/**
* @brief Returns chip version from efuse
*
* @return chip version
*/
uint8_t esp_efuse_get_chip_ver(void);
/**
* @brief Returns chip package from efuse
*
* @return chip package
*/
uint32_t esp_efuse_get_pkg_ver(void);
/* @brief Permanently update values written to the efuse write registers
*
* After updating EFUSE_BLKx_WDATAx_REG registers with new values to
* write, call this function to permanently write them to efuse.
*
* @note Setting bits in efuse is permanent, they cannot be unset.
*
* @note Due to this restriction you don't need to copy values to
* Efuse write registers from the matching read registers, bits which
* are set in the read register but unset in the matching write
* register will be unchanged when new values are burned.
*
* @note This function is not threadsafe, if calling code updates
* efuse values from multiple tasks then this is caller's
* responsibility to serialise.
*
* After burning new efuses, the read registers are updated to match
* the new efuse values.
*/
void esp_efuse_burn_new_values(void);
/* @brief Reset efuse write registers
*
* Efuse write registers are written to zero, to negate
* any changes that have been staged here.
*
* @note This function is not threadsafe, if calling code updates
* efuse values from multiple tasks then this is caller's
* responsibility to serialise.
*/
void esp_efuse_reset(void);
#ifdef CONFIG_IDF_TARGET_ESP32
/* @brief Disable BASIC ROM Console via efuse
*
* By default, if booting from flash fails the ESP32 will boot a
* BASIC console in ROM.
*
* Call this function (from bootloader or app) to permanently
* disable the console on this chip.
*
*
*/
void esp_efuse_disable_basic_rom_console(void);
#endif
/* @brief Write random data to efuse key block write registers
*
* @note Caller is responsible for ensuring efuse
* block is empty and not write protected, before calling.
*
* @note Behaviour depends on coding scheme: a 256-bit key is
* generated and written for Coding Scheme "None", a 192-bit key
* is generated, extended to 256-bits by the Coding Scheme,
* and then writtten for 3/4 Coding Scheme.
*
* @note This function does not burn the new values, caller should
* call esp_efuse_burn_new_values() when ready to do this.
*
* @param blk_wdata0_reg Address of the first data write register
* in the block
*/
void esp_efuse_write_random_key(uint32_t blk_wdata0_reg);
/* @brief Return secure_version from efuse field.
* @return Secure version from efuse field
*/
uint32_t esp_efuse_read_secure_version(void);
/* @brief Check secure_version from app and secure_version and from efuse field.
*
* @param secure_version Secure version from app.
* @return
* - True: If version of app is equal or more then secure_version from efuse.
*/
bool esp_efuse_check_secure_version(uint32_t secure_version);
/* @brief Write efuse field by secure_version value.
*
* Update the secure_version value is available if the coding scheme is None.
* Note: Do not use this function in your applications. This function is called as part of the other API.
*
* @param[in] secure_version Secure version from app.
* @return
* - ESP_OK: Successful.
* - ESP_FAIL: secure version of app cannot be set to efuse field.
* - ESP_ERR_NOT_SUPPORTED: Anti rollback is not supported with the 3/4 and Repeat coding scheme.
*/
esp_err_t esp_efuse_update_secure_version(uint32_t secure_version);
/* @brief Initializes variables: offset and size to simulate the work of an eFuse.
*
* Note: To simulate the work of an eFuse need to set CONFIG_BOOTLOADER_EFUSE_SECURE_VERSION_EMULATE option
* and to add in the partition.csv file a line `efuse_em, data, efuse, , 0x2000,`.
*
* @param[in] offset The starting address of the partition where the eFuse data will be located.
* @param[in] size The size of the partition.
*/
void esp_efuse_init(uint32_t offset, uint32_t size);
/* @brief Set the batch mode of writing fields.
*
* This mode allows you to write the fields in the batch mode.
* If this mode is enabled, esp_efuse_batch_write_commit() must be called
* to actually burn any written efuses.
* In this mode, reading efuse is not possible.
* This mode should be used when burning several efuses at one time.
*
* \code{c}
* // Example of using the batch writing mode.
*
* // set the batch writing mode
* esp_efuse_batch_write_begin();
*
* // use any writing functions as usual
* esp_efuse_write_field_blob(ESP_EFUSE_...);
* esp_efuse_write_field_cnt(ESP_EFUSE_...);
* esp_efuse_set_write_protect(EFUSE_BLKx);
* esp_efuse_write_reg(EFUSE_BLKx, ...);
* esp_efuse_write_block(EFUSE_BLKx, ...);
* ...
*
* // Write all of these fields to the efuse registers
* esp_efuse_batch_write_commit();
*
* \endcode
*
* @return
* - ESP_OK: Successful.
*/
esp_err_t esp_efuse_batch_write_begin(void);
/* @brief Reset the batch mode of writing fields.
*
* It will reset the batch writing mode and any written changes.
*
* @return
* - ESP_OK: Successful.
* - ESP_ERR_INVALID_STATE: Tha batch mode was not set.
*/
esp_err_t esp_efuse_batch_write_cancel(void);
/* @brief Writes all prepared data for the batch mode.
*
* Must be called to ensure changes are written to the efuse registers.
* After this the batch writing mode will be reset.
*
* @return
* - ESP_OK: Successful.
* - ESP_ERR_INVALID_STATE: The deferred writing mode was not set.
*/
esp_err_t esp_efuse_batch_write_commit(void);
#ifdef __cplusplus
}
#endif