feedc0de/arduino-esp32
1
0
Fork 0
forked from espressif/arduino-esp32
Code Pull Requests Activity

Initial Commit

Browse Source
This commit is contained in:
me-no-dev
2020-05-09 19:11:30 +03:00
parent ebe0d9a6cb
commit 0a262244e6
4324 changed files with 645232 additions and 253864 deletions
Download Patch File Download Diff File Expand all files Collapse all files

136
tools/sdk/esp32/include/soc/soc/esp32/i2c_apll.h Normal file
View File

@ -0,0 +1,136 @@
// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
/**
* @file i2c_apll.h
* @brief Register definitions for audio PLL (APLL)
*
* This file lists register fields of APLL, located on an internal configuration
* bus. These definitions are used via macros defined in i2c_rtc_clk.h, by
* rtc_clk_apll_enable function in rtc_clk.c.
*/
#define I2C_APLL 0X6D
#define I2C_APLL_HOSTID 3
#define I2C_APLL_IR_CAL_DELAY 0
#define I2C_APLL_IR_CAL_DELAY_MSB 3
#define I2C_APLL_IR_CAL_DELAY_LSB 0
#define I2C_APLL_IR_CAL_RSTB 0
#define I2C_APLL_IR_CAL_RSTB_MSB 4
#define I2C_APLL_IR_CAL_RSTB_LSB 4
#define I2C_APLL_IR_CAL_START 0
#define I2C_APLL_IR_CAL_START_MSB 5
#define I2C_APLL_IR_CAL_START_LSB 5
#define I2C_APLL_IR_CAL_UNSTOP 0
#define I2C_APLL_IR_CAL_UNSTOP_MSB 6
#define I2C_APLL_IR_CAL_UNSTOP_LSB 6
#define I2C_APLL_OC_ENB_FCAL 0
#define I2C_APLL_OC_ENB_FCAL_MSB 7
#define I2C_APLL_OC_ENB_FCAL_LSB 7
#define I2C_APLL_IR_CAL_EXT_CAP 1
#define I2C_APLL_IR_CAL_EXT_CAP_MSB 4
#define I2C_APLL_IR_CAL_EXT_CAP_LSB 0
#define I2C_APLL_IR_CAL_ENX_CAP 1
#define I2C_APLL_IR_CAL_ENX_CAP_MSB 5
#define I2C_APLL_IR_CAL_ENX_CAP_LSB 5
#define I2C_APLL_OC_LBW 1
#define I2C_APLL_OC_LBW_MSB 6
#define I2C_APLL_OC_LBW_LSB 6
#define I2C_APLL_IR_CAL_CK_DIV 2
#define I2C_APLL_IR_CAL_CK_DIV_MSB 3
#define I2C_APLL_IR_CAL_CK_DIV_LSB 0
#define I2C_APLL_OC_DCHGP 2
#define I2C_APLL_OC_DCHGP_MSB 6
#define I2C_APLL_OC_DCHGP_LSB 4
#define I2C_APLL_OC_ENB_VCON 2
#define I2C_APLL_OC_ENB_VCON_MSB 7
#define I2C_APLL_OC_ENB_VCON_LSB 7
#define I2C_APLL_OR_CAL_CAP 3
#define I2C_APLL_OR_CAL_CAP_MSB 4
#define I2C_APLL_OR_CAL_CAP_LSB 0
#define I2C_APLL_OR_CAL_UDF 3
#define I2C_APLL_OR_CAL_UDF_MSB 5
#define I2C_APLL_OR_CAL_UDF_LSB 5
#define I2C_APLL_OR_CAL_OVF 3
#define I2C_APLL_OR_CAL_OVF_MSB 6
#define I2C_APLL_OR_CAL_OVF_LSB 6
#define I2C_APLL_OR_CAL_END 3
#define I2C_APLL_OR_CAL_END_MSB 7
#define I2C_APLL_OR_CAL_END_LSB 7
#define I2C_APLL_OR_OUTPUT_DIV 4
#define I2C_APLL_OR_OUTPUT_DIV_MSB 4
#define I2C_APLL_OR_OUTPUT_DIV_LSB 0
#define I2C_APLL_OC_TSCHGP 4
#define I2C_APLL_OC_TSCHGP_MSB 6
#define I2C_APLL_OC_TSCHGP_LSB 6
#define I2C_APLL_EN_FAST_CAL 4
#define I2C_APLL_EN_FAST_CAL_MSB 7
#define I2C_APLL_EN_FAST_CAL_LSB 7
#define I2C_APLL_OC_DHREF_SEL 5
#define I2C_APLL_OC_DHREF_SEL_MSB 1
#define I2C_APLL_OC_DHREF_SEL_LSB 0
#define I2C_APLL_OC_DLREF_SEL 5
#define I2C_APLL_OC_DLREF_SEL_MSB 3
#define I2C_APLL_OC_DLREF_SEL_LSB 2
#define I2C_APLL_SDM_DITHER 5
#define I2C_APLL_SDM_DITHER_MSB 4
#define I2C_APLL_SDM_DITHER_LSB 4
#define I2C_APLL_SDM_STOP 5
#define I2C_APLL_SDM_STOP_MSB 5
#define I2C_APLL_SDM_STOP_LSB 5
#define I2C_APLL_SDM_RSTB 5
#define I2C_APLL_SDM_RSTB_MSB 6
#define I2C_APLL_SDM_RSTB_LSB 6
#define I2C_APLL_OC_DVDD 6
#define I2C_APLL_OC_DVDD_MSB 4
#define I2C_APLL_OC_DVDD_LSB 0
#define I2C_APLL_DSDM2 7
#define I2C_APLL_DSDM2_MSB 5
#define I2C_APLL_DSDM2_LSB 0
#define I2C_APLL_DSDM1 8
#define I2C_APLL_DSDM1_MSB 7
#define I2C_APLL_DSDM1_LSB 0
#define I2C_APLL_DSDM0 9
#define I2C_APLL_DSDM0_MSB 7
#define I2C_APLL_DSDM0_LSB 0

208
tools/sdk/esp32/include/soc/soc/esp32/i2c_bbpll.h Normal file
View File

@ -0,0 +1,208 @@
// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
/**
* @file i2c_apll.h
* @brief Register definitions for digital PLL (BBPLL)
*
* This file lists register fields of BBPLL, located on an internal configuration
* bus. These definitions are used via macros defined in i2c_rtc_clk.h, by
* rtc_clk_cpu_freq_set function in rtc_clk.c.
*/
#define I2C_BBPLL 0x66
#define I2C_BBPLL_HOSTID 4
#define I2C_BBPLL_IR_CAL_DELAY 0
#define I2C_BBPLL_IR_CAL_DELAY_MSB 3
#define I2C_BBPLL_IR_CAL_DELAY_LSB 0
#define I2C_BBPLL_IR_CAL_CK_DIV 0
#define I2C_BBPLL_IR_CAL_CK_DIV_MSB 7
#define I2C_BBPLL_IR_CAL_CK_DIV_LSB 4
#define I2C_BBPLL_IR_CAL_EXT_CAP 1
#define I2C_BBPLL_IR_CAL_EXT_CAP_MSB 3
#define I2C_BBPLL_IR_CAL_EXT_CAP_LSB 0
#define I2C_BBPLL_IR_CAL_ENX_CAP 1
#define I2C_BBPLL_IR_CAL_ENX_CAP_MSB 4
#define I2C_BBPLL_IR_CAL_ENX_CAP_LSB 4
#define I2C_BBPLL_IR_CAL_RSTB 1
#define I2C_BBPLL_IR_CAL_RSTB_MSB 5
#define I2C_BBPLL_IR_CAL_RSTB_LSB 5
#define I2C_BBPLL_IR_CAL_START 1
#define I2C_BBPLL_IR_CAL_START_MSB 6
#define I2C_BBPLL_IR_CAL_START_LSB 6
#define I2C_BBPLL_IR_CAL_UNSTOP 1
#define I2C_BBPLL_IR_CAL_UNSTOP_MSB 7
#define I2C_BBPLL_IR_CAL_UNSTOP_LSB 7
#define I2C_BBPLL_OC_REF_DIV 2
#define I2C_BBPLL_OC_REF_DIV_MSB 3
#define I2C_BBPLL_OC_REF_DIV_LSB 0
#define I2C_BBPLL_OC_DIV_10_8 2
#define I2C_BBPLL_OC_DIV_10_8_MSB 6
#define I2C_BBPLL_OC_DIV_10_8_LSB 4
#define I2C_BBPLL_OC_LREF 2
#define I2C_BBPLL_OC_LREF_MSB 7
#define I2C_BBPLL_OC_LREF_LSB 7
#define I2C_BBPLL_OC_DIV_7_0 3
#define I2C_BBPLL_OC_DIV_7_0_MSB 7
#define I2C_BBPLL_OC_DIV_7_0_LSB 0
#define I2C_BBPLL_OC_ENB_FCAL 4
#define I2C_BBPLL_OC_ENB_FCAL_MSB 0
#define I2C_BBPLL_OC_ENB_FCAL_LSB 0
#define I2C_BBPLL_OC_DCHGP 4
#define I2C_BBPLL_OC_DCHGP_MSB 3
#define I2C_BBPLL_OC_DCHGP_LSB 1
#define I2C_BBPLL_OC_DHREF_SEL 4
#define I2C_BBPLL_OC_DHREF_SEL_MSB 5
#define I2C_BBPLL_OC_DHREF_SEL_LSB 4
#define I2C_BBPLL_OC_DLREF_SEL 4
#define I2C_BBPLL_OC_DLREF_SEL_MSB 7
#define I2C_BBPLL_OC_DLREF_SEL_LSB 6
#define I2C_BBPLL_OC_DCUR 5
#define I2C_BBPLL_OC_DCUR_MSB 2
#define I2C_BBPLL_OC_DCUR_LSB 0
#define I2C_BBPLL_OC_BST_DIV 5
#define I2C_BBPLL_OC_BST_DIV_MSB 3
#define I2C_BBPLL_OC_BST_DIV_LSB 3
#define I2C_BBPLL_OC_BST_E2C 5
#define I2C_BBPLL_OC_BST_E2C_MSB 4
#define I2C_BBPLL_OC_BST_E2C_LSB 4
#define I2C_BBPLL_OC_TSCHGP 5
#define I2C_BBPLL_OC_TSCHGP_MSB 5
#define I2C_BBPLL_OC_TSCHGP_LSB 5
#define I2C_BBPLL_OC_BW 5
#define I2C_BBPLL_OC_BW_MSB 7
#define I2C_BBPLL_OC_BW_LSB 6
#define I2C_BBPLL_OR_LOCK1 6
#define I2C_BBPLL_OR_LOCK1_MSB 0
#define I2C_BBPLL_OR_LOCK1_LSB 0
#define I2C_BBPLL_OR_LOCK2 6
#define I2C_BBPLL_OR_LOCK2_MSB 1
#define I2C_BBPLL_OR_LOCK2_LSB 1
#define I2C_BBPLL_OR_CAL_CAP 7
#define I2C_BBPLL_OR_CAL_CAP_MSB 3
#define I2C_BBPLL_OR_CAL_CAP_LSB 0
#define I2C_BBPLL_OR_CAL_UDF 7
#define I2C_BBPLL_OR_CAL_UDF_MSB 4
#define I2C_BBPLL_OR_CAL_UDF_LSB 4
#define I2C_BBPLL_OR_CAL_OVF 7
#define I2C_BBPLL_OR_CAL_OVF_MSB 5
#define I2C_BBPLL_OR_CAL_OVF_LSB 5
#define I2C_BBPLL_OR_CAL_END 7
#define I2C_BBPLL_OR_CAL_END_MSB 6
#define I2C_BBPLL_OR_CAL_END_LSB 6
#define I2C_BBPLL_BBADC_DELAY1 8
#define I2C_BBPLL_BBADC_DELAY1_MSB 1
#define I2C_BBPLL_BBADC_DELAY1_LSB 0
#define I2C_BBPLL_BBADC_DELAY2 8
#define I2C_BBPLL_BBADC_DELAY2_MSB 3
#define I2C_BBPLL_BBADC_DELAY2_LSB 2
#define I2C_BBPLL_BBADC_DELAY3 8
#define I2C_BBPLL_BBADC_DELAY3_MSB 5
#define I2C_BBPLL_BBADC_DELAY3_LSB 4
#define I2C_BBPLL_BBADC_DELAY4 8
#define I2C_BBPLL_BBADC_DELAY4_MSB 7
#define I2C_BBPLL_BBADC_DELAY4_LSB 6
#define I2C_BBPLL_BBADC_DELAY5 9
#define I2C_BBPLL_BBADC_DELAY5_MSB 1
#define I2C_BBPLL_BBADC_DELAY5_LSB 0
#define I2C_BBPLL_BBADC_DELAY6 9
#define I2C_BBPLL_BBADC_DELAY6_MSB 3
#define I2C_BBPLL_BBADC_DELAY6_LSB 2
#define I2C_BBPLL_BBADC_DSMP 9
#define I2C_BBPLL_BBADC_DSMP_MSB 7
#define I2C_BBPLL_BBADC_DSMP_LSB 4
#define I2C_BBPLL_DTEST 10
#define I2C_BBPLL_DTEST_MSB 1
#define I2C_BBPLL_DTEST_LSB 0
#define I2C_BBPLL_ENT_ADC 10
#define I2C_BBPLL_ENT_ADC_MSB 3
#define I2C_BBPLL_ENT_ADC_LSB 2
#define I2C_BBPLL_BBADC_DIV 10
#define I2C_BBPLL_BBADC_DIV_MSB 5
#define I2C_BBPLL_BBADC_DIV_LSB 4
#define I2C_BBPLL_ENT_PLL 10
#define I2C_BBPLL_ENT_PLL_MSB 6
#define I2C_BBPLL_ENT_PLL_LSB 6
#define I2C_BBPLL_OC_ENB_VCON 10
#define I2C_BBPLL_OC_ENB_VCON_MSB 7
#define I2C_BBPLL_OC_ENB_VCON_LSB 7
#define I2C_BBPLL_DIV_DAC 11
#define I2C_BBPLL_DIV_DAC_MSB 0
#define I2C_BBPLL_DIV_DAC_LSB 0
#define I2C_BBPLL_DIV_CPU 11
#define I2C_BBPLL_DIV_CPU_MSB 1
#define I2C_BBPLL_DIV_CPU_LSB 1
#define I2C_BBPLL_BBADC_INPUT_SHORT 11
#define I2C_BBPLL_BBADC_INPUT_SHORT_MSB 2
#define I2C_BBPLL_BBADC_INPUT_SHORT_LSB 2
#define I2C_BBPLL_BBADC_CAL_9_8 11
#define I2C_BBPLL_BBADC_CAL_9_8_MSB 4
#define I2C_BBPLL_BBADC_CAL_9_8_LSB 3
#define I2C_BBPLL_BBADC_DCM 11
#define I2C_BBPLL_BBADC_DCM_MSB 6
#define I2C_BBPLL_BBADC_DCM_LSB 5
#define I2C_BBPLL_ENDIV5 11
#define I2C_BBPLL_ENDIV5_MSB 7
#define I2C_BBPLL_ENDIV5_LSB 7
#define I2C_BBPLL_BBADC_CAL_7_0 12
#define I2C_BBPLL_BBADC_CAL_7_0_MSB 7
#define I2C_BBPLL_BBADC_CAL_7_0_LSB 0

29
tools/sdk/esp32/include/soc/soc/esp32/include/soc/adc_caps.h Normal file
View File

@ -0,0 +1,29 @@
#pragma once
#define SOC_ADC_PERIPH_NUM (2)
#define SOC_ADC_PATT_LEN_MAX (16)
#define SOC_ADC_CHANNEL_NUM(PERIPH_NUM) ((PERIPH_NUM==0)? 8: 10)
#define SOC_ADC_MAX_CHANNEL_NUM (10)
#define SOC_ADC1_DATA_INVERT_DEFAULT (1)
#define SOC_ADC2_DATA_INVERT_DEFAULT (1)
#define SOC_ADC_DIGI_DATA_INVERT_DEFAULT(PERIPH_NUM) (1)
#define SOC_ADC_FSM_RSTB_WAIT_DEFAULT (8)
#define SOC_ADC_FSM_START_WAIT_DEFAULT (5)
#define SOC_ADC_FSM_STANDBY_WAIT_DEFAULT (100)
#define ADC_FSM_SAMPLE_CYCLE_DEFAULT (2)
/**
* Check if adc support digital controller (DMA) mode.
* @value
* - 1 : support;
* - 0 : not support;
*/
#define SOC_ADC_SUPPORT_DMA_MODE(PERIPH_NUM) ((PERIPH_NUM==0)? 1: 0)
#define SOC_ADC_PWDET_CCT_DEFAULT (4)
#define SOC_ADC_SAR_CLK_DIV_DEFAULT(PERIPH_NUM) (2)

72
tools/sdk/esp32/include/soc/soc/esp32/include/soc/adc_channel.h Normal file
View File

@ -0,0 +1,72 @@
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_ADC_CHANNEL_H
#define _SOC_ADC_CHANNEL_H
#define ADC1_GPIO36_CHANNEL ADC1_CHANNEL_0
#define ADC1_CHANNEL_0_GPIO_NUM 36
#define ADC1_GPIO37_CHANNEL ADC1_CHANNEL_1
#define ADC1_CHANNEL_1_GPIO_NUM 37
#define ADC1_GPIO38_CHANNEL ADC1_CHANNEL_2
#define ADC1_CHANNEL_2_GPIO_NUM 38
#define ADC1_GPIO39_CHANNEL ADC1_CHANNEL_3
#define ADC1_CHANNEL_3_GPIO_NUM 39
#define ADC1_GPIO32_CHANNEL ADC1_CHANNEL_4
#define ADC1_CHANNEL_4_GPIO_NUM 32
#define ADC1_GPIO33_CHANNEL ADC1_CHANNEL_5
#define ADC1_CHANNEL_5_GPIO_NUM 33
#define ADC1_GPIO34_CHANNEL ADC1_CHANNEL_6
#define ADC1_CHANNEL_6_GPIO_NUM 34
#define ADC1_GPIO35_CHANNEL ADC1_CHANNEL_7
#define ADC1_CHANNEL_7_GPIO_NUM 35
#define ADC2_GPIO4_CHANNEL ADC2_CHANNEL_0
#define ADC2_CHANNEL_0_GPIO_NUM 4
#define ADC2_GPIO0_CHANNEL ADC2_CHANNEL_1
#define ADC2_CHANNEL_1_GPIO_NUM 0
#define ADC2_GPIO2_CHANNEL ADC2_CHANNEL_2
#define ADC2_CHANNEL_2_GPIO_NUM 2
#define ADC2_GPIO15_CHANNEL ADC2_CHANNEL_3
#define ADC2_CHANNEL_3_GPIO_NUM 15
#define ADC2_GPIO13_CHANNEL ADC2_CHANNEL_4
#define ADC2_CHANNEL_4_GPIO_NUM 13
#define ADC2_GPIO12_CHANNEL ADC2_CHANNEL_5
#define ADC2_CHANNEL_5_GPIO_NUM 12
#define ADC2_GPIO14_CHANNEL ADC2_CHANNEL_6
#define ADC2_CHANNEL_6_GPIO_NUM 14
#define ADC2_GPIO27_CHANNEL ADC2_CHANNEL_7
#define ADC2_CHANNEL_7_GPIO_NUM 27
#define ADC2_GPIO25_CHANNEL ADC2_CHANNEL_8
#define ADC2_CHANNEL_8_GPIO_NUM 25
#define ADC2_GPIO26_CHANNEL ADC2_CHANNEL_9
#define ADC2_CHANNEL_9_GPIO_NUM 26
#endif /* _SOC_ADC_CHANNEL_H_ */

294
tools/sdk/esp32/include/soc/soc/esp32/include/soc/apb_ctrl_reg.h Normal file
View File

@ -0,0 +1,294 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_APB_CTRL_REG_H_
#define _SOC_APB_CTRL_REG_H_
#include "soc.h"
#define APB_CTRL_SYSCLK_CONF_REG (DR_REG_APB_CTRL_BASE + 0x0)
/* APB_CTRL_QUICK_CLK_CHNG : R/W ;bitpos:[13] ;default: 1'b1 ; */
/*description: */
#define APB_CTRL_QUICK_CLK_CHNG (BIT(13))
#define APB_CTRL_QUICK_CLK_CHNG_M (BIT(13))
#define APB_CTRL_QUICK_CLK_CHNG_V 0x1
#define APB_CTRL_QUICK_CLK_CHNG_S 13
/* APB_CTRL_RST_TICK_CNT : R/W ;bitpos:[12] ;default: 1'b0 ; */
/*description: */
#define APB_CTRL_RST_TICK_CNT (BIT(12))
#define APB_CTRL_RST_TICK_CNT_M (BIT(12))
#define APB_CTRL_RST_TICK_CNT_V 0x1
#define APB_CTRL_RST_TICK_CNT_S 12
/* APB_CTRL_CLK_EN : R/W ;bitpos:[11] ;default: 1'b0 ; */
/*description: */
#define APB_CTRL_CLK_EN (BIT(11))
#define APB_CTRL_CLK_EN_M (BIT(11))
#define APB_CTRL_CLK_EN_V 0x1
#define APB_CTRL_CLK_EN_S 11
/* APB_CTRL_CLK_320M_EN : R/W ;bitpos:[10] ;default: 1'b0 ; */
/*description: */
#define APB_CTRL_CLK_320M_EN (BIT(10))
#define APB_CTRL_CLK_320M_EN_M (BIT(10))
#define APB_CTRL_CLK_320M_EN_V 0x1
#define APB_CTRL_CLK_320M_EN_S 10
/* APB_CTRL_PRE_DIV_CNT : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: */
#define APB_CTRL_PRE_DIV_CNT 0x000003FF
#define APB_CTRL_PRE_DIV_CNT_M ((APB_CTRL_PRE_DIV_CNT_V)<<(APB_CTRL_PRE_DIV_CNT_S))
#define APB_CTRL_PRE_DIV_CNT_V 0x3FF
#define APB_CTRL_PRE_DIV_CNT_S 0
#define APB_CTRL_XTAL_TICK_CONF_REG (DR_REG_APB_CTRL_BASE + 0x4)
/* APB_CTRL_XTAL_TICK_NUM : R/W ;bitpos:[7:0] ;default: 8'd39 ; */
/*description: */
#define APB_CTRL_XTAL_TICK_NUM 0x000000FF
#define APB_CTRL_XTAL_TICK_NUM_M ((APB_CTRL_XTAL_TICK_NUM_V)<<(APB_CTRL_XTAL_TICK_NUM_S))
#define APB_CTRL_XTAL_TICK_NUM_V 0xFF
#define APB_CTRL_XTAL_TICK_NUM_S 0
#define APB_CTRL_PLL_TICK_CONF_REG (DR_REG_APB_CTRL_BASE + 0x8)
/* APB_CTRL_PLL_TICK_NUM : R/W ;bitpos:[7:0] ;default: 8'd79 ; */
/*description: */
#define APB_CTRL_PLL_TICK_NUM 0x000000FF
#define APB_CTRL_PLL_TICK_NUM_M ((APB_CTRL_PLL_TICK_NUM_V)<<(APB_CTRL_PLL_TICK_NUM_S))
#define APB_CTRL_PLL_TICK_NUM_V 0xFF
#define APB_CTRL_PLL_TICK_NUM_S 0
#define APB_CTRL_CK8M_TICK_CONF_REG (DR_REG_APB_CTRL_BASE + 0xC)
/* APB_CTRL_CK8M_TICK_NUM : R/W ;bitpos:[7:0] ;default: 8'd11 ; */
/*description: */
#define APB_CTRL_CK8M_TICK_NUM 0x000000FF
#define APB_CTRL_CK8M_TICK_NUM_M ((APB_CTRL_CK8M_TICK_NUM_V)<<(APB_CTRL_CK8M_TICK_NUM_S))
#define APB_CTRL_CK8M_TICK_NUM_V 0xFF
#define APB_CTRL_CK8M_TICK_NUM_S 0
#define APB_CTRL_APB_SARADC_CTRL_REG (DR_REG_APB_CTRL_BASE + 0x10)
/* APB_CTRL_SARADC_DATA_TO_I2S : R/W ;bitpos:[26] ;default: 1'b0 ; */
/*description: 1: I2S input data is from SAR ADC (for DMA) 0: I2S input data
is from GPIO matrix*/
#define APB_CTRL_SARADC_DATA_TO_I2S (BIT(26))
#define APB_CTRL_SARADC_DATA_TO_I2S_M (BIT(26))
#define APB_CTRL_SARADC_DATA_TO_I2S_V 0x1
#define APB_CTRL_SARADC_DATA_TO_I2S_S 26
/* APB_CTRL_SARADC_DATA_SAR_SEL : R/W ;bitpos:[25] ;default: 1'b0 ; */
/*description: 1: sar_sel will be coded by the MSB of the 16-bit output data
in this case the resolution should not be larger than 11 bits.*/
#define APB_CTRL_SARADC_DATA_SAR_SEL (BIT(25))
#define APB_CTRL_SARADC_DATA_SAR_SEL_M (BIT(25))
#define APB_CTRL_SARADC_DATA_SAR_SEL_V 0x1
#define APB_CTRL_SARADC_DATA_SAR_SEL_S 25
/* APB_CTRL_SARADC_SAR2_PATT_P_CLEAR : R/W ;bitpos:[24] ;default: 1'd0 ; */
/*description: clear the pointer of pattern table for DIG ADC2 CTRL*/
#define APB_CTRL_SARADC_SAR2_PATT_P_CLEAR (BIT(24))
#define APB_CTRL_SARADC_SAR2_PATT_P_CLEAR_M (BIT(24))
#define APB_CTRL_SARADC_SAR2_PATT_P_CLEAR_V 0x1
#define APB_CTRL_SARADC_SAR2_PATT_P_CLEAR_S 24
/* APB_CTRL_SARADC_SAR1_PATT_P_CLEAR : R/W ;bitpos:[23] ;default: 1'd0 ; */
/*description: clear the pointer of pattern table for DIG ADC1 CTRL*/
#define APB_CTRL_SARADC_SAR1_PATT_P_CLEAR (BIT(23))
#define APB_CTRL_SARADC_SAR1_PATT_P_CLEAR_M (BIT(23))
#define APB_CTRL_SARADC_SAR1_PATT_P_CLEAR_V 0x1
#define APB_CTRL_SARADC_SAR1_PATT_P_CLEAR_S 23
/* APB_CTRL_SARADC_SAR2_PATT_LEN : R/W ;bitpos:[22:19] ;default: 4'd15 ; */
/*description: 0 ~ 15 means length 1 ~ 16*/
#define APB_CTRL_SARADC_SAR2_PATT_LEN 0x0000000F
#define APB_CTRL_SARADC_SAR2_PATT_LEN_M ((APB_CTRL_SARADC_SAR2_PATT_LEN_V)<<(APB_CTRL_SARADC_SAR2_PATT_LEN_S))
#define APB_CTRL_SARADC_SAR2_PATT_LEN_V 0xF
#define APB_CTRL_SARADC_SAR2_PATT_LEN_S 19
/* APB_CTRL_SARADC_SAR1_PATT_LEN : R/W ;bitpos:[18:15] ;default: 4'd15 ; */
/*description: 0 ~ 15 means length 1 ~ 16*/
#define APB_CTRL_SARADC_SAR1_PATT_LEN 0x0000000F
#define APB_CTRL_SARADC_SAR1_PATT_LEN_M ((APB_CTRL_SARADC_SAR1_PATT_LEN_V)<<(APB_CTRL_SARADC_SAR1_PATT_LEN_S))
#define APB_CTRL_SARADC_SAR1_PATT_LEN_V 0xF
#define APB_CTRL_SARADC_SAR1_PATT_LEN_S 15
/* APB_CTRL_SARADC_SAR_CLK_DIV : R/W ;bitpos:[14:7] ;default: 8'd4 ; */
/*description: SAR clock divider*/
#define APB_CTRL_SARADC_SAR_CLK_DIV 0x000000FF
#define APB_CTRL_SARADC_SAR_CLK_DIV_M ((APB_CTRL_SARADC_SAR_CLK_DIV_V)<<(APB_CTRL_SARADC_SAR_CLK_DIV_S))
#define APB_CTRL_SARADC_SAR_CLK_DIV_V 0xFF
#define APB_CTRL_SARADC_SAR_CLK_DIV_S 7
/* APB_CTRL_SARADC_SAR_CLK_GATED : R/W ;bitpos:[6] ;default: 1'b1 ; */
/*description: */
#define APB_CTRL_SARADC_SAR_CLK_GATED (BIT(6))
#define APB_CTRL_SARADC_SAR_CLK_GATED_M (BIT(6))
#define APB_CTRL_SARADC_SAR_CLK_GATED_V 0x1
#define APB_CTRL_SARADC_SAR_CLK_GATED_S 6
/* APB_CTRL_SARADC_SAR_SEL : R/W ;bitpos:[5] ;default: 1'd0 ; */
/*description: 0: SAR1 1: SAR2 only work for single SAR mode*/
#define APB_CTRL_SARADC_SAR_SEL (BIT(5))
#define APB_CTRL_SARADC_SAR_SEL_M (BIT(5))
#define APB_CTRL_SARADC_SAR_SEL_V 0x1
#define APB_CTRL_SARADC_SAR_SEL_S 5
/* APB_CTRL_SARADC_WORK_MODE : R/W ;bitpos:[4:3] ;default: 2'd0 ; */
/*description: 0: single mode 1: double mode 2: alternate mode*/
#define APB_CTRL_SARADC_WORK_MODE 0x00000003
#define APB_CTRL_SARADC_WORK_MODE_M ((APB_CTRL_SARADC_WORK_MODE_V)<<(APB_CTRL_SARADC_WORK_MODE_S))
#define APB_CTRL_SARADC_WORK_MODE_V 0x3
#define APB_CTRL_SARADC_WORK_MODE_S 3
/* APB_CTRL_SARADC_SAR2_MUX : R/W ;bitpos:[2] ;default: 1'd0 ; */
/*description: 1: SAR ADC2 is controlled by DIG ADC2 CTRL 0: SAR ADC2 is controlled
by PWDET CTRL*/
#define APB_CTRL_SARADC_SAR2_MUX (BIT(2))
#define APB_CTRL_SARADC_SAR2_MUX_M (BIT(2))
#define APB_CTRL_SARADC_SAR2_MUX_V 0x1
#define APB_CTRL_SARADC_SAR2_MUX_S 2
/* APB_CTRL_SARADC_START : R/W ;bitpos:[1] ;default: 1'd0 ; */
/*description: */
#define APB_CTRL_SARADC_START (BIT(1))
#define APB_CTRL_SARADC_START_M (BIT(1))
#define APB_CTRL_SARADC_START_V 0x1
#define APB_CTRL_SARADC_START_S 1
/* APB_CTRL_SARADC_START_FORCE : R/W ;bitpos:[0] ;default: 1'd0 ; */
/*description: */
#define APB_CTRL_SARADC_START_FORCE (BIT(0))
#define APB_CTRL_SARADC_START_FORCE_M (BIT(0))
#define APB_CTRL_SARADC_START_FORCE_V 0x1
#define APB_CTRL_SARADC_START_FORCE_S 0
#define APB_CTRL_APB_SARADC_CTRL2_REG (DR_REG_APB_CTRL_BASE + 0x14)
/* APB_CTRL_SARADC_SAR2_INV : R/W ;bitpos:[10] ;default: 1'd0 ; */
/*description: 1: data to DIG ADC2 CTRL is inverted otherwise not*/
#define APB_CTRL_SARADC_SAR2_INV (BIT(10))
#define APB_CTRL_SARADC_SAR2_INV_M (BIT(10))
#define APB_CTRL_SARADC_SAR2_INV_V 0x1
#define APB_CTRL_SARADC_SAR2_INV_S 10
/* APB_CTRL_SARADC_SAR1_INV : R/W ;bitpos:[9] ;default: 1'd0 ; */
/*description: 1: data to DIG ADC1 CTRL is inverted otherwise not*/
#define APB_CTRL_SARADC_SAR1_INV (BIT(9))
#define APB_CTRL_SARADC_SAR1_INV_M (BIT(9))
#define APB_CTRL_SARADC_SAR1_INV_V 0x1
#define APB_CTRL_SARADC_SAR1_INV_S 9
/* APB_CTRL_SARADC_MAX_MEAS_NUM : R/W ;bitpos:[8:1] ;default: 8'd255 ; */
/*description: max conversion number*/
#define APB_CTRL_SARADC_MAX_MEAS_NUM 0x000000FF
#define APB_CTRL_SARADC_MAX_MEAS_NUM_M ((APB_CTRL_SARADC_MAX_MEAS_NUM_V)<<(APB_CTRL_SARADC_MAX_MEAS_NUM_S))
#define APB_CTRL_SARADC_MAX_MEAS_NUM_V 0xFF
#define APB_CTRL_SARADC_MAX_MEAS_NUM_S 1
/* APB_CTRL_SARADC_MEAS_NUM_LIMIT : R/W ;bitpos:[0] ;default: 1'd0 ; */
/*description: */
#define APB_CTRL_SARADC_MEAS_NUM_LIMIT (BIT(0))
#define APB_CTRL_SARADC_MEAS_NUM_LIMIT_M (BIT(0))
#define APB_CTRL_SARADC_MEAS_NUM_LIMIT_V 0x1
#define APB_CTRL_SARADC_MEAS_NUM_LIMIT_S 0
#define APB_CTRL_APB_SARADC_FSM_REG (DR_REG_APB_CTRL_BASE + 0x18)
/* APB_CTRL_SARADC_SAMPLE_CYCLE : R/W ;bitpos:[31:24] ;default: 8'd2 ; */
/*description: sample cycles*/
#define APB_CTRL_SARADC_SAMPLE_CYCLE 0x000000FF
#define APB_CTRL_SARADC_SAMPLE_CYCLE_M ((APB_CTRL_SARADC_SAMPLE_CYCLE_V)<<(APB_CTRL_SARADC_SAMPLE_CYCLE_S))
#define APB_CTRL_SARADC_SAMPLE_CYCLE_V 0xFF
#define APB_CTRL_SARADC_SAMPLE_CYCLE_S 24
/* APB_CTRL_SARADC_START_WAIT : R/W ;bitpos:[23:16] ;default: 8'd8 ; */
/*description: */
#define APB_CTRL_SARADC_START_WAIT 0x000000FF
#define APB_CTRL_SARADC_START_WAIT_M ((APB_CTRL_SARADC_START_WAIT_V)<<(APB_CTRL_SARADC_START_WAIT_S))
#define APB_CTRL_SARADC_START_WAIT_V 0xFF
#define APB_CTRL_SARADC_START_WAIT_S 16
/* APB_CTRL_SARADC_STANDBY_WAIT : R/W ;bitpos:[15:8] ;default: 8'd255 ; */
/*description: */
#define APB_CTRL_SARADC_STANDBY_WAIT 0x000000FF
#define APB_CTRL_SARADC_STANDBY_WAIT_M ((APB_CTRL_SARADC_STANDBY_WAIT_V)<<(APB_CTRL_SARADC_STANDBY_WAIT_S))
#define APB_CTRL_SARADC_STANDBY_WAIT_V 0xFF
#define APB_CTRL_SARADC_STANDBY_WAIT_S 8
/* APB_CTRL_SARADC_RSTB_WAIT : R/W ;bitpos:[7:0] ;default: 8'd8 ; */
/*description: */
#define APB_CTRL_SARADC_RSTB_WAIT 0x000000FF
#define APB_CTRL_SARADC_RSTB_WAIT_M ((APB_CTRL_SARADC_RSTB_WAIT_V)<<(APB_CTRL_SARADC_RSTB_WAIT_S))
#define APB_CTRL_SARADC_RSTB_WAIT_V 0xFF
#define APB_CTRL_SARADC_RSTB_WAIT_S 0
#define APB_CTRL_APB_SARADC_SAR1_PATT_TAB1_REG (DR_REG_APB_CTRL_BASE + 0x1C)
/* APB_CTRL_SARADC_SAR1_PATT_TAB1 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: item 0 ~ 3 for pattern table 1 (each item one byte)*/
#define APB_CTRL_SARADC_SAR1_PATT_TAB1 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR1_PATT_TAB1_M ((APB_CTRL_SARADC_SAR1_PATT_TAB1_V)<<(APB_CTRL_SARADC_SAR1_PATT_TAB1_S))
#define APB_CTRL_SARADC_SAR1_PATT_TAB1_V 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR1_PATT_TAB1_S 0
#define APB_CTRL_APB_SARADC_SAR1_PATT_TAB2_REG (DR_REG_APB_CTRL_BASE + 0x20)
/* APB_CTRL_SARADC_SAR1_PATT_TAB2 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 4 ~ 7 for pattern table 1 (each item one byte)*/
#define APB_CTRL_SARADC_SAR1_PATT_TAB2 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR1_PATT_TAB2_M ((APB_CTRL_SARADC_SAR1_PATT_TAB2_V)<<(APB_CTRL_SARADC_SAR1_PATT_TAB2_S))
#define APB_CTRL_SARADC_SAR1_PATT_TAB2_V 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR1_PATT_TAB2_S 0
#define APB_CTRL_APB_SARADC_SAR1_PATT_TAB3_REG (DR_REG_APB_CTRL_BASE + 0x24)
/* APB_CTRL_SARADC_SAR1_PATT_TAB3 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 8 ~ 11 for pattern table 1 (each item one byte)*/
#define APB_CTRL_SARADC_SAR1_PATT_TAB3 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR1_PATT_TAB3_M ((APB_CTRL_SARADC_SAR1_PATT_TAB3_V)<<(APB_CTRL_SARADC_SAR1_PATT_TAB3_S))
#define APB_CTRL_SARADC_SAR1_PATT_TAB3_V 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR1_PATT_TAB3_S 0
#define APB_CTRL_APB_SARADC_SAR1_PATT_TAB4_REG (DR_REG_APB_CTRL_BASE + 0x28)
/* APB_CTRL_SARADC_SAR1_PATT_TAB4 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 12 ~ 15 for pattern table 1 (each item one byte)*/
#define APB_CTRL_SARADC_SAR1_PATT_TAB4 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR1_PATT_TAB4_M ((APB_CTRL_SARADC_SAR1_PATT_TAB4_V)<<(APB_CTRL_SARADC_SAR1_PATT_TAB4_S))
#define APB_CTRL_SARADC_SAR1_PATT_TAB4_V 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR1_PATT_TAB4_S 0
#define APB_CTRL_APB_SARADC_SAR2_PATT_TAB1_REG (DR_REG_APB_CTRL_BASE + 0x2C)
/* APB_CTRL_SARADC_SAR2_PATT_TAB1 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: item 0 ~ 3 for pattern table 2 (each item one byte)*/
#define APB_CTRL_SARADC_SAR2_PATT_TAB1 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR2_PATT_TAB1_M ((APB_CTRL_SARADC_SAR2_PATT_TAB1_V)<<(APB_CTRL_SARADC_SAR2_PATT_TAB1_S))
#define APB_CTRL_SARADC_SAR2_PATT_TAB1_V 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR2_PATT_TAB1_S 0
#define APB_CTRL_APB_SARADC_SAR2_PATT_TAB2_REG (DR_REG_APB_CTRL_BASE + 0x30)
/* APB_CTRL_SARADC_SAR2_PATT_TAB2 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 4 ~ 7 for pattern table 2 (each item one byte)*/
#define APB_CTRL_SARADC_SAR2_PATT_TAB2 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR2_PATT_TAB2_M ((APB_CTRL_SARADC_SAR2_PATT_TAB2_V)<<(APB_CTRL_SARADC_SAR2_PATT_TAB2_S))
#define APB_CTRL_SARADC_SAR2_PATT_TAB2_V 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR2_PATT_TAB2_S 0
#define APB_CTRL_APB_SARADC_SAR2_PATT_TAB3_REG (DR_REG_APB_CTRL_BASE + 0x34)
/* APB_CTRL_SARADC_SAR2_PATT_TAB3 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 8 ~ 11 for pattern table 2 (each item one byte)*/
#define APB_CTRL_SARADC_SAR2_PATT_TAB3 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR2_PATT_TAB3_M ((APB_CTRL_SARADC_SAR2_PATT_TAB3_V)<<(APB_CTRL_SARADC_SAR2_PATT_TAB3_S))
#define APB_CTRL_SARADC_SAR2_PATT_TAB3_V 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR2_PATT_TAB3_S 0
#define APB_CTRL_APB_SARADC_SAR2_PATT_TAB4_REG (DR_REG_APB_CTRL_BASE + 0x38)
/* APB_CTRL_SARADC_SAR2_PATT_TAB4 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 12 ~ 15 for pattern table 2 (each item one byte)*/
#define APB_CTRL_SARADC_SAR2_PATT_TAB4 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR2_PATT_TAB4_M ((APB_CTRL_SARADC_SAR2_PATT_TAB4_V)<<(APB_CTRL_SARADC_SAR2_PATT_TAB4_S))
#define APB_CTRL_SARADC_SAR2_PATT_TAB4_V 0xFFFFFFFF
#define APB_CTRL_SARADC_SAR2_PATT_TAB4_S 0
#define APB_CTRL_APLL_TICK_CONF_REG (DR_REG_APB_CTRL_BASE + 0x3C)
/* APB_CTRL_APLL_TICK_NUM : R/W ;bitpos:[7:0] ;default: 8'd99 ; */
/*description: */
#define APB_CTRL_APLL_TICK_NUM 0x000000FF
#define APB_CTRL_APLL_TICK_NUM_M ((APB_CTRL_APLL_TICK_NUM_V)<<(APB_CTRL_APLL_TICK_NUM_S))
#define APB_CTRL_APLL_TICK_NUM_V 0xFF
#define APB_CTRL_APLL_TICK_NUM_S 0
#define APB_CTRL_DATE_REG (DR_REG_APB_CTRL_BASE + 0x7C)
/* APB_CTRL_DATE : R/W ;bitpos:[31:0] ;default: 32'h16042000 ; */
/*description: */
#define APB_CTRL_DATE 0xFFFFFFFF
#define APB_CTRL_DATE_M ((APB_CTRL_DATE_V)<<(APB_CTRL_DATE_S))
#define APB_CTRL_DATE_V 0xFFFFFFFF
#define APB_CTRL_DATE_S 0
#endif /*_SOC_APB_CTRL_REG_H_ */

132
tools/sdk/esp32/include/soc/soc/esp32/include/soc/apb_ctrl_struct.h Normal file
View File

@ -0,0 +1,132 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_APB_CTRL_STRUCT_H_
#define _SOC_APB_CTRL_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef struct apb_ctrl_dev_s {
union {
struct {
volatile uint32_t pre_div: 10;
volatile uint32_t clk_320m_en: 1;
volatile uint32_t clk_en: 1;
volatile uint32_t rst_tick: 1;
volatile uint32_t quick_clk_chng: 1;
volatile uint32_t reserved14: 18;
};
volatile uint32_t val;
}clk_conf;
union {
struct {
volatile uint32_t xtal_tick: 8;
volatile uint32_t reserved8: 24;
};
volatile uint32_t val;
}xtal_tick_conf;
union {
struct {
volatile uint32_t pll_tick: 8;
volatile uint32_t reserved8: 24;
};
volatile uint32_t val;
}pll_tick_conf;
union {
struct {
volatile uint32_t ck8m_tick: 8;
volatile uint32_t reserved8: 24;
};
volatile uint32_t val;
}ck8m_tick_conf;
union {
struct {
volatile uint32_t start_force: 1;
volatile uint32_t start: 1;
volatile uint32_t sar2_mux: 1; /*1: SAR ADC2 is controlled by DIG ADC2 CTRL 0: SAR ADC2 is controlled by PWDET CTRL*/
volatile uint32_t work_mode: 2; /*0: single mode 1: double mode 2: alternate mode*/
volatile uint32_t sar_sel: 1; /*0: SAR1 1: SAR2 only work for single SAR mode*/
volatile uint32_t sar_clk_gated: 1;
volatile uint32_t sar_clk_div: 8; /*SAR clock divider*/
volatile uint32_t sar1_patt_len: 4; /*0 ~ 15 means length 1 ~ 16*/
volatile uint32_t sar2_patt_len: 4; /*0 ~ 15 means length 1 ~ 16*/
volatile uint32_t sar1_patt_p_clear: 1; /*clear the pointer of pattern table for DIG ADC1 CTRL*/
volatile uint32_t sar2_patt_p_clear: 1; /*clear the pointer of pattern table for DIG ADC2 CTRL*/
volatile uint32_t data_sar_sel: 1; /*1: sar_sel will be coded by the MSB of the 16-bit output data in this case the resolution should not be larger than 11 bits.*/
volatile uint32_t data_to_i2s: 1; /*1: I2S input data is from SAR ADC (for DMA) 0: I2S input data is from GPIO matrix*/
volatile uint32_t reserved27: 5;
};
volatile uint32_t val;
}saradc_ctrl;
union {
struct {
volatile uint32_t meas_num_limit: 1;
volatile uint32_t max_meas_num: 8; /*max conversion number*/
volatile uint32_t sar1_inv: 1; /*1: data to DIG ADC1 CTRL is inverted otherwise not*/
volatile uint32_t sar2_inv: 1; /*1: data to DIG ADC2 CTRL is inverted otherwise not*/
volatile uint32_t reserved11: 21;
};
volatile uint32_t val;
}saradc_ctrl2;
union {
struct {
volatile uint32_t rstb_wait: 8;
volatile uint32_t standby_wait: 8;
volatile uint32_t start_wait: 8;
volatile uint32_t sample_cycle: 8; /*sample cycles*/
};
volatile uint32_t val;
}saradc_fsm;
volatile uint32_t saradc_sar1_patt_tab1; /*item 0 ~ 3 for pattern table 1 (each item one byte)*/
volatile uint32_t saradc_sar1_patt_tab2; /*Item 4 ~ 7 for pattern table 1 (each item one byte)*/
volatile uint32_t saradc_sar1_patt_tab3; /*Item 8 ~ 11 for pattern table 1 (each item one byte)*/
volatile uint32_t saradc_sar1_patt_tab4; /*Item 12 ~ 15 for pattern table 1 (each item one byte)*/
volatile uint32_t saradc_sar2_patt_tab1; /*item 0 ~ 3 for pattern table 2 (each item one byte)*/
volatile uint32_t saradc_sar2_patt_tab2; /*Item 4 ~ 7 for pattern table 2 (each item one byte)*/
volatile uint32_t saradc_sar2_patt_tab3; /*Item 8 ~ 11 for pattern table 2 (each item one byte)*/
volatile uint32_t saradc_sar2_patt_tab4; /*Item 12 ~ 15 for pattern table 2 (each item one byte)*/
union {
struct {
volatile uint32_t apll_tick: 8;
volatile uint32_t reserved8: 24;
};
volatile uint32_t val;
}apll_tick_conf;
volatile uint32_t reserved_40;
volatile uint32_t reserved_44;
volatile uint32_t reserved_48;
volatile uint32_t reserved_4c;
volatile uint32_t reserved_50;
volatile uint32_t reserved_54;
volatile uint32_t reserved_58;
volatile uint32_t reserved_5c;
volatile uint32_t reserved_60;
volatile uint32_t reserved_64;
volatile uint32_t reserved_68;
volatile uint32_t reserved_6c;
volatile uint32_t reserved_70;
volatile uint32_t reserved_74;
volatile uint32_t reserved_78;
volatile uint32_t date; /**/
} apb_ctrl_dev_t;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_APB_CTRL_STRUCT_H_ */

42
tools/sdk/esp32/include/soc/soc/esp32/include/soc/bb_reg.h Normal file
View File

@ -0,0 +1,42 @@
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_BB_REG_H_
#define _SOC_BB_REG_H_
/* Some of the baseband control registers.
* PU/PD fields defined here are used in sleep related functions.
*/
#define BBPD_CTRL (DR_REG_BB_BASE + 0x0054)
#define BB_FFT_FORCE_PU (BIT(3))
#define BB_FFT_FORCE_PU_M (BIT(3))
#define BB_FFT_FORCE_PU_V 1
#define BB_FFT_FORCE_PU_S 3
#define BB_FFT_FORCE_PD (BIT(2))
#define BB_FFT_FORCE_PD_M (BIT(2))
#define BB_FFT_FORCE_PD_V 1
#define BB_FFT_FORCE_PD_S 2
#define BB_DC_EST_FORCE_PU (BIT(1))
#define BB_DC_EST_FORCE_PU_M (BIT(1))
#define BB_DC_EST_FORCE_PU_V 1
#define BB_DC_EST_FORCE_PU_S 1
#define BB_DC_EST_FORCE_PD (BIT(0))
#define BB_DC_EST_FORCE_PD_M (BIT(0))
#define BB_DC_EST_FORCE_PD_V 1
#define BB_DC_EST_FORCE_PD_S 0
#endif /* _SOC_BB_REG_H_ */

104
tools/sdk/esp32/include/soc/soc/esp32/include/soc/boot_mode.h Normal file
View File

@ -0,0 +1,104 @@
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_BOOT_MODE_H_
#define _SOC_BOOT_MODE_H_
#include "soc.h"
/*SPI Boot*/
#define IS_1XXXX(v) (((v)&0x10)==0x10)
/*HSPI Boot*/
#define IS_010XX(v) (((v)&0x1c)==0x08)
/*Download Boot, SDIO/UART0/UART1*/
#define IS_00XXX(v) (((v)&0x18)==0x00)
/*Download Boot, SDIO/UART0/UART1,FEI_FEO V2*/
#define IS_00X00(v) (((v)&0x1b)==0x00)
/*Download Boot, SDIO/UART0/UART1,FEI_REO V2*/
#define IS_00X01(v) (((v)&0x1b)==0x01)
/*Download Boot, SDIO/UART0/UART1,REI_FEO V2*/
#define IS_00X10(v) (((v)&0x1b)==0x02)
/*Download Boot, SDIO/UART0/UART1,REI_FEO V2*/
#define IS_00X11(v) (((v)&0x1b)==0x03)
/*ATE/ANALOG Mode*/
#define IS_01110(v) (((v)&0x1f)==0x0e)
/*Diagnostic Mode+UART0 download Mode*/
#define IS_01111(v) (((v)&0x1f)==0x0f)
/*legacy SPI Boot*/
#define IS_01100(v) (((v)&0x1f)==0x0c)
/*SDIO_Slave download Mode V1.1*/
#define IS_01101(v) (((v)&0x1f)==0x0d)
#define BOOT_MODE_GET() (GPIO_REG_READ(GPIO_STRAP))
/*do not include download mode*/
#define ETS_IS_UART_BOOT() IS_01111(BOOT_MODE_GET())
/*all spi boot including spi/hspi/legacy*/
#define ETS_IS_FLASH_BOOT() (IS_1XXXX(BOOT_MODE_GET()) || IS_010XX(BOOT_MODE_GET()) || IS_01100(BOOT_MODE_GET()))
/*all faster spi boot including spi/hspi*/
#define ETS_IS_FAST_FLASH_BOOT() (IS_1XXXX(BOOT_MODE_GET()) || IS_010XX(BOOT_MODE_GET()))
/*all spi boot including spi/legacy*/
#define ETS_IS_SPI_FLASH_BOOT() (IS_1XXXX(BOOT_MODE_GET()) || IS_01100(BOOT_MODE_GET()))
/*all spi boot including hspi/legacy*/
#define ETS_IS_HSPI_FLASH_BOOT() IS_010XX(BOOT_MODE_GET())
/*all sdio V2 of failing edge input, failing edge output*/
#define ETS_IS_SDIO_FEI_FEO_V2_BOOT() IS_00X00(BOOT_MODE_GET())
/*all sdio V2 of failing edge input, raising edge output*/
#define ETS_IS_SDIO_FEI_REO_V2_BOOT() IS_00X01(BOOT_MODE_GET())
/*all sdio V2 of raising edge input, failing edge output*/
#define ETS_IS_SDIO_REI_FEO_V2_BOOT() IS_00X10(BOOT_MODE_GET())
/*all sdio V2 of raising edge input, raising edge output*/
#define ETS_IS_SDIO_REI_REO_V2_BOOT() IS_00X11(BOOT_MODE_GET())
/*all sdio V1 of raising edge input, failing edge output*/
#define ETS_IS_SDIO_REI_FEO_V1_BOOT() IS_01101(BOOT_MODE_GET())
/*do not include download mode*/
#define ETS_IS_SDIO_BOOT() IS_01101(BOOT_MODE_GET())
/*joint download boot*/
#define ETS_IS_SDIO_UART_BOOT() IS_00XXX(BOOT_MODE_GET())
/*ATE mode*/
#define ETS_IS_ATE_BOOT() IS_01110(BOOT_MODE_GET())
/*A bit to control flash boot print*/
#define ETS_IS_PRINT_BOOT() (BOOT_MODE_GET() & 0x2)
/*used by ETS_IS_SDIO_UART_BOOT*/
#define SEL_NO_BOOT 0
#define SEL_SDIO_BOOT BIT0
#define SEL_UART_BOOT BIT1
#endif /* _SOC_BOOT_MODE_H_ */

29
tools/sdk/esp32/include/soc/soc/esp32/include/soc/brownout_caps.h Normal file
View File

@ -0,0 +1,29 @@
// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include "sdkconfig.h"
#if __DOXYGEN__ || (CONFIG_ESP32_REV_MIN >= 1)
#define SOC_BROWNOUT_RESET_SUPPORTED 1
#endif
#ifdef __cplusplus
}
#endif

39
tools/sdk/esp32/include/soc/soc/esp32/include/soc/can_caps.h Normal file
View File

@ -0,0 +1,39 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include "sdkconfig.h"
#if __DOXYGEN__ || (CONFIG_ESP32_REV_MIN >= 2)
#define CAN_BRP_DIV_SUPPORTED 1
#define CAN_BRP_DIV_THRESH 128
//Any even number from 2 to 128, or multiples of 4 from 132 to 256
#define CAN_BRP_IS_VALID(brp) (((brp) >= 2 && (brp) <= 128 && ((brp) & 0x1) == 0) || ((brp) >= 132 && (brp) <= 256 && ((brp) & 0x3) == 0))
#else
//Any even number from 2 to 128
#define CAN_BRP_IS_VALID(brp) ((brp) >= 2 && (brp) <= 128 && ((brp) & 0x1) == 0)
#endif
//Todo: Add FIFO overrun errata workaround
//Todo: Add ECC decode capabilities
//Todo: Add ALC decode capability
#ifdef __cplusplus
}
#endif

210
tools/sdk/esp32/include/soc/soc/esp32/include/soc/can_struct.h Normal file
View File

@ -0,0 +1,210 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
/* ---------------------------- Register Layout ------------------------------ */
/* The CAN peripheral's registers are 8bits, however the ESP32 can only access
* peripheral registers every 32bits. Therefore each CAN register is mapped to
* the least significant byte of every 32bits.
*/
typedef volatile struct can_dev_s {
//Configuration and Control Registers
union {
struct {
uint32_t rm: 1; /* MOD.0 Reset Mode */
uint32_t lom: 1; /* MOD.1 Listen Only Mode */
uint32_t stm: 1; /* MOD.2 Self Test Mode */
uint32_t afm: 1; /* MOD.3 Acceptance Filter Mode */
uint32_t reserved28: 28; /* Internal Reserved. MOD.4 Sleep Mode not supported */
};
uint32_t val;
} mode_reg; /* Address 0 */
union {
struct {
uint32_t tr: 1; /* CMR.0 Transmission Request */
uint32_t at: 1; /* CMR.1 Abort Transmission */
uint32_t rrb: 1; /* CMR.2 Release Receive Buffer */
uint32_t cdo: 1; /* CMR.3 Clear Data Overrun */
uint32_t srr: 1; /* CMR.4 Self Reception Request */
uint32_t reserved27: 27; /* Internal Reserved */
};
uint32_t val;
} command_reg; /* Address 1 */
union {
struct {
uint32_t rbs: 1; /* SR.0 Receive Buffer Status */
uint32_t dos: 1; /* SR.1 Data Overrun Status */
uint32_t tbs: 1; /* SR.2 Transmit Buffer Status */
uint32_t tcs: 1; /* SR.3 Transmission Complete Status */
uint32_t rs: 1; /* SR.4 Receive Status */
uint32_t ts: 1; /* SR.5 Transmit Status */
uint32_t es: 1; /* SR.6 Error Status */
uint32_t bs: 1; /* SR.7 Bus Status */
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} status_reg; /* Address 2 */
union {
struct {
uint32_t ri: 1; /* IR.0 Receive Interrupt */
uint32_t ti: 1; /* IR.1 Transmit Interrupt */
uint32_t ei: 1; /* IR.2 Error Interrupt */
uint32_t reserved2: 2; /* Internal Reserved (Data Overrun interrupt and Wake-up not supported) */
uint32_t epi: 1; /* IR.5 Error Passive Interrupt */
uint32_t ali: 1; /* IR.6 Arbitration Lost Interrupt */
uint32_t bei: 1; /* IR.7 Bus Error Interrupt */
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} interrupt_reg; /* Address 3 */
union {
struct {
uint32_t rie: 1; /* IER.0 Receive Interrupt Enable */
uint32_t tie: 1; /* IER.1 Transmit Interrupt Enable */
uint32_t eie: 1; /* IER.2 Error Interrupt Enable */
uint32_t doie: 1; /* IER.3 Data Overrun Interrupt Enable */
uint32_t brp_div: 1; /* THIS IS NOT AN INTERRUPT. brp_div will prescale BRP by 2. Only available on ESP32 Revision 2 or later. Reserved otherwise */
uint32_t epie: 1; /* IER.5 Error Passive Interrupt Enable */
uint32_t alie: 1; /* IER.6 Arbitration Lost Interrupt Enable */
uint32_t beie: 1; /* IER.7 Bus Error Interrupt Enable */
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} interrupt_enable_reg; /* Address 4 */
uint32_t reserved_05; /* Address 5 */
union {
struct {
uint32_t brp: 6; /* BTR0[5:0] Baud Rate Prescaler */
uint32_t sjw: 2; /* BTR0[7:6] Synchronization Jump Width*/
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} bus_timing_0_reg; /* Address 6 */
union {
struct {
uint32_t tseg1: 4; /* BTR1[3:0] Timing Segment 1 */
uint32_t tseg2: 3; /* BTR1[6:4] Timing Segment 2 */
uint32_t sam: 1; /* BTR1.7 Sampling*/
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} bus_timing_1_reg; /* Address 7 */
uint32_t reserved_08; /* Address 8 (Output control not supported) */
uint32_t reserved_09; /* Address 9 (Test Register not supported) */
uint32_t reserved_10; /* Address 10 */
//Capture and Counter Registers
union {
struct {
uint32_t alc: 5; /* ALC[4:0] Arbitration lost capture */
uint32_t reserved27: 27; /* Internal Reserved */
};
uint32_t val;
} arbitration_lost_captue_reg; /* Address 11 */
union {
struct {
uint32_t seg: 5; /* ECC[4:0] Error Code Segment 0 to 5 */
uint32_t dir: 1; /* ECC.5 Error Direction (TX/RX) */
uint32_t errc: 2; /* ECC[7:6] Error Code */
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} error_code_capture_reg; /* Address 12 */
union {
struct {
uint32_t ewl: 8; /* EWL[7:0] Error Warning Limit */
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} error_warning_limit_reg; /* EWLR[7:0] Error Warning Limit: Address 13 */
union {
struct {
uint32_t rxerr: 8; /* RXERR[7:0] Receive Error Counter */
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} rx_error_counter_reg; /* Address 12 */
union {
struct {
uint32_t txerr: 8; /* TXERR[7:0] Receive Error Counter */
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} tx_error_counter_reg; /* Address 15 */
//Shared Registers (TX Buff/RX Buff/Acc Filter)
union {
struct {
union {
struct {
uint32_t byte: 8; /* ACRx[7:0] Acceptance Code */
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} acr[4];
union {
struct {
uint32_t byte: 8; /* AMRx[7:0] Acceptance Mask */
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} amr[4];
uint32_t reserved32[5];
} acceptance_filter;
union {
struct {
uint32_t byte: 8;
uint32_t reserved24: 24;
};
uint32_t val;
} tx_rx_buffer[13];
}; /* Address 16-28 TX/RX Buffer and Acc Filter*/;
//Misc Registers
union {
struct {
uint32_t rmc: 5; /* RMC[4:0] RX Message Counter */
uint32_t reserved27: 27; /* Internal Reserved */
};
uint32_t val;
} rx_message_counter_reg; /* Address 29 */
uint32_t reserved_30; /* Address 30 (RX Buffer Start Address not supported) */
union {
struct {
uint32_t cd: 3; /* CDR[2:0] CLKOUT frequency selector based of fOSC */
uint32_t co: 1; /* CDR.3 CLKOUT enable/disable */
uint32_t reserved3: 3; /* Internal Reserved. RXINTEN and CBP not supported */
uint32_t cm: 1; /* CDR.7 BasicCAN:0 PeliCAN:1 */
uint32_t reserved24: 24; /* Internal Reserved */
};
uint32_t val;
} clock_divider_reg; /* Address 31 */
} can_dev_t;
_Static_assert(sizeof(can_dev_t) == 128, "CAN registers should be 32 * 4 bytes");
extern can_dev_t CAN;
#ifdef __cplusplus
}
#endif

26
tools/sdk/esp32/include/soc/soc/esp32/include/soc/clkout_channel.h Normal file
View File

@ -0,0 +1,26 @@
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_CLKOUT_CHANNEL_H
#define _SOC_CLKOUT_CHANNEL_H
//CLKOUT channels
#define CLKOUT_GPIO0_DIRECT_CHANNEL CLKOUT_CHANNEL_1
#define CLKOUT_CHANNEL_1_DIRECT_GPIO_NUM 0
#define CLKOUT_GPIO3_DIRECT_CHANNEL CLKOUT_CHANNEL_2
#define CLKOUT_CHANNEL_2_DIRECT_GPIO_NUM 3
#define CLKOUT_GPIO1_DIRECT_CHANNEL CLKOUT_CHANNEL_3
#define CLKOUT_CHANNEL_3_DIRECT_GPIO_NUM 1
#endif

20
tools/sdk/esp32/include/soc/soc/esp32/include/soc/cpu_caps.h Normal file
View File

@ -0,0 +1,20 @@
// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#define SOC_CPU_BREAKPOINTS_NUM 2
#define SOC_CPU_WATCHPOINTS_NUM 2
#define SOC_CPU_WATCHPOINT_SIZE 64 // bytes

22
tools/sdk/esp32/include/soc/soc/esp32/include/soc/dac_caps.h Normal file
View File

@ -0,0 +1,22 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_RTC_DAC_CAPS_H_
#define _SOC_RTC_DAC_CAPS_H_
#define SOC_DAC_PERIPH_NUM 2
#define SOC_DAC_RESOLUTION 8 // DAC resolution ratio 8 bit
#endif

24
tools/sdk/esp32/include/soc/soc/esp32/include/soc/dac_channel.h Normal file
View File

@ -0,0 +1,24 @@
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_DAC_CHANNEL_H
#define _SOC_DAC_CHANNEL_H
#define DAC_GPIO25_CHANNEL DAC_CHANNEL_1
#define DAC_CHANNEL_1_GPIO_NUM 25
#define DAC_GPIO26_CHANNEL DAC_CHANNEL_2
#define DAC_CHANNEL_2_GPIO_NUM 26
#endif

202
tools/sdk/esp32/include/soc/soc/esp32/include/soc/dport_access.h Normal file
View File

@ -0,0 +1,202 @@
// Copyright 2010-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _DPORT_ACCESS_H_
#define _DPORT_ACCESS_H_
#include <stdint.h>
#include "esp_attr.h"
#include "esp32/dport_access.h"
#include "soc.h"
#include "uart_reg.h"
#include "xtensa/xtruntime.h"
#ifdef __cplusplus
extern "C" {
#endif
//Registers Operation {{
// The _DPORT_xxx register read macros access DPORT memory directly (as opposed to
// DPORT_REG_READ which applies SMP-safe protections).
//
// There are several ways to read the DPORT registers:
// 1) Use DPORT_REG_READ versions to be SMP-safe in IDF apps.
// This method uses the pre-read APB implementation(*) without stall other CPU.
// This is beneficial for single readings.
// 2) If you want to make a sequence of DPORT reads to buffer,
// use dport_read_buffer(buff_out, address, num_words),
// it is the faster method and it doesn't stop other CPU.
// 3) If you want to make a sequence of DPORT reads, but you don't want to stop other CPU
// and you want to do it faster then you need use DPORT_SEQUENCE_REG_READ().
// The difference from the first is that the user himself must disable interrupts while DPORT reading.
// Note that disable interrupt need only if the chip has two cores.
// 4) If you want to make a sequence of DPORT reads,
// use DPORT_STALL_OTHER_CPU_START() macro explicitly
// and then use _DPORT_REG_READ macro while other CPU is stalled.
// After completing read operations, use DPORT_STALL_OTHER_CPU_END().
// This method uses stall other CPU while reading DPORT registers.
// Useful for compatibility, as well as for large consecutive readings.
// This method is slower, but must be used if ROM functions or
// other code is called which accesses DPORT without any other workaround.
// *) The pre-readable APB register before reading the DPORT register
// helps synchronize the operation of the two CPUs,
// so that reading on different CPUs no longer causes random errors APB register.
// _DPORT_REG_WRITE & DPORT_REG_WRITE are equivalent.
#define _DPORT_REG_READ(_r) (*(volatile uint32_t *)(_r))
#define _DPORT_REG_WRITE(_r, _v) (*(volatile uint32_t *)(_r)) = (_v)
// Write value to DPORT register (does not require protecting)
#define DPORT_REG_WRITE(_r, _v) _DPORT_REG_WRITE((_r), (_v))
/**
* @brief Read value from register, SMP-safe version.
*
* This method uses the pre-reading of the APB register before reading the register of the DPORT.
* This implementation is useful for reading DORT registers for single reading without stall other CPU.
* There is disable/enable interrupt.
*
* @param reg Register address
* @return Value
*/
static inline uint32_t IRAM_ATTR DPORT_REG_READ(uint32_t reg)
{
#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
return _DPORT_REG_READ(reg);
#else
return esp_dport_access_reg_read(reg);
#endif
}
/**
* @brief Read value from register, NOT SMP-safe version.
*
* This method uses the pre-reading of the APB register before reading the register of the DPORT.
* There is not disable/enable interrupt.
* The difference from DPORT_REG_READ() is that the user himself must disable interrupts while DPORT reading.
* This implementation is useful for reading DORT registers in loop without stall other CPU. Note the usage example.
* The recommended way to read registers sequentially without stall other CPU
* is to use the method esp_dport_read_buffer(buff_out, address, num_words). It allows you to read registers in the buffer.
*
* \code{c}
* // This example shows how to use it.
* { // Use curly brackets to limit the visibility of variables in macros DPORT_INTERRUPT_DISABLE/RESTORE.
* DPORT_INTERRUPT_DISABLE(); // Disable interrupt only on current CPU.
* for (i = 0; i < max; ++i) {
* array[i] = DPORT_SEQUENCE_REG_READ(Address + i * 4); // reading DPORT registers
* }
* DPORT_INTERRUPT_RESTORE(); // restore the previous interrupt level
* }
* \endcode
*
* @param reg Register address
* @return Value
*/
static inline uint32_t IRAM_ATTR DPORT_SEQUENCE_REG_READ(uint32_t reg)
{
#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
return _DPORT_REG_READ(reg);
#else
return esp_dport_access_sequence_reg_read(reg);
#endif
}
//get bit or get bits from register
#define DPORT_REG_GET_BIT(_r, _b) (DPORT_REG_READ(_r) & (_b))
//set bit or set bits to register
#define DPORT_REG_SET_BIT(_r, _b) DPORT_REG_WRITE((_r), (DPORT_REG_READ(_r)|(_b)))
//clear bit or clear bits of register
#define DPORT_REG_CLR_BIT(_r, _b) DPORT_REG_WRITE((_r), (DPORT_REG_READ(_r) & (~(_b))))
//set bits of register controlled by mask
#define DPORT_REG_SET_BITS(_r, _b, _m) DPORT_REG_WRITE((_r), ((DPORT_REG_READ(_r) & (~(_m))) | ((_b) & (_m))))
//get field from register, uses field _S & _V to determine mask
#define DPORT_REG_GET_FIELD(_r, _f) ((DPORT_REG_READ(_r) >> (_f##_S)) & (_f##_V))
//set field to register, used when _f is not left shifted by _f##_S
#define DPORT_REG_SET_FIELD(_r, _f, _v) DPORT_REG_WRITE((_r), ((DPORT_REG_READ(_r) & (~((_f##_V) << (_f##_S))))|(((_v) & (_f##_V))<<(_f##_S))))
//get field value from a variable, used when _f is not left shifted by _f##_S
#define DPORT_VALUE_GET_FIELD(_r, _f) (((_r) >> (_f##_S)) & (_f))
//get field value from a variable, used when _f is left shifted by _f##_S
#define DPORT_VALUE_GET_FIELD2(_r, _f) (((_r) & (_f))>> (_f##_S))
//set field value to a variable, used when _f is not left shifted by _f##_S
#define DPORT_VALUE_SET_FIELD(_r, _f, _v) ((_r)=(((_r) & ~((_f) << (_f##_S)))|((_v)<<(_f##_S))))
//set field value to a variable, used when _f is left shifted by _f##_S
#define DPORT_VALUE_SET_FIELD2(_r, _f, _v) ((_r)=(((_r) & ~(_f))|((_v)<<(_f##_S))))
//generate a value from a field value, used when _f is not left shifted by _f##_S
#define DPORT_FIELD_TO_VALUE(_f, _v) (((_v)&(_f))<<_f##_S)
//generate a value from a field value, used when _f is left shifted by _f##_S
#define DPORT_FIELD_TO_VALUE2(_f, _v) (((_v)<<_f##_S) & (_f))
//Register read macros with an underscore prefix access DPORT memory directly. In IDF apps, use the non-underscore versions to be SMP-safe.
#define _DPORT_READ_PERI_REG(addr) (*((volatile uint32_t *)(addr)))
#define _DPORT_WRITE_PERI_REG(addr, val) (*((volatile uint32_t *)(addr))) = (uint32_t)(val)
#define _DPORT_REG_SET_BIT(_r, _b) _DPORT_REG_WRITE((_r), (_DPORT_REG_READ(_r)|(_b)))
#define _DPORT_REG_CLR_BIT(_r, _b) _DPORT_REG_WRITE((_r), (_DPORT_REG_READ(_r) & (~(_b))))
/**
* @brief Read value from register, SMP-safe version.
*
* This method uses the pre-reading of the APB register before reading the register of the DPORT.
* This implementation is useful for reading DORT registers for single reading without stall other CPU.
*
* @param reg Register address
* @return Value
*/
static inline uint32_t IRAM_ATTR DPORT_READ_PERI_REG(uint32_t reg)
{
#if defined(BOOTLOADER_BUILD) || !defined(CONFIG_ESP32_DPORT_WORKAROUND) || !defined(ESP_PLATFORM)
return _DPORT_REG_READ(reg);
#else
return esp_dport_access_reg_read(reg);
#endif
}
//write value to register
#define DPORT_WRITE_PERI_REG(addr, val) _DPORT_WRITE_PERI_REG((addr), (val))
//clear bits of register controlled by mask
#define DPORT_CLEAR_PERI_REG_MASK(reg, mask) DPORT_WRITE_PERI_REG((reg), (DPORT_READ_PERI_REG(reg)&(~(mask))))
//set bits of register controlled by mask
#define DPORT_SET_PERI_REG_MASK(reg, mask) DPORT_WRITE_PERI_REG((reg), (DPORT_READ_PERI_REG(reg)|(mask)))
//get bits of register controlled by mask
#define DPORT_GET_PERI_REG_MASK(reg, mask) (DPORT_READ_PERI_REG(reg) & (mask))
//get bits of register controlled by highest bit and lowest bit
#define DPORT_GET_PERI_REG_BITS(reg, hipos,lowpos) ((DPORT_READ_PERI_REG(reg)>>(lowpos))&((1<<((hipos)-(lowpos)+1))-1))
//set bits of register controlled by mask and shift
#define DPORT_SET_PERI_REG_BITS(reg,bit_map,value,shift) DPORT_WRITE_PERI_REG((reg), ((DPORT_READ_PERI_REG(reg)&(~((bit_map)<<(shift))))|(((value) & bit_map)<<(shift))))
//get field of register
#define DPORT_GET_PERI_REG_BITS2(reg, mask,shift) ((DPORT_READ_PERI_REG(reg)>>(shift))&(mask))
//}}
#ifdef __cplusplus
}
#endif
#endif /* _DPORT_ACCESS_H_ */

4284
tools/sdk/esp32/include/soc/soc/esp32/include/soc/dport_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

1188
tools/sdk/esp32/include/soc/soc/esp32/include/soc/efuse_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

162
tools/sdk/esp32/include/soc/soc/esp32/include/soc/emac_dma_struct.h Normal file
View File

@ -0,0 +1,162 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C"
{
#endif
#include <stdint.h>
typedef volatile struct {
union {
struct {
uint32_t sw_rst : 1; /*When this bit is set the MAC DMA Controller resets the logic and all internal registers of the MAC. It is cleared automatically after the reset operation is complete in all of the ETH_MAC clock domains. Before reprogramming any register of the ETH_MAC you should read a zero (0) value in this bit.*/
uint32_t dma_arb_sch : 1; /*This bit specifies the arbitration scheme between the transmit and receive paths.1'b0: weighted round-robin with RX:TX or TX:RX priority specified in PR (bit[15:14]). 1'b1 Fixed priority (Rx priority to Tx).*/
uint32_t desc_skip_len : 5; /*This bit specifies the number of Word to skip between two unchained descriptors.The address skipping starts from the end of current descriptor to the start of next descriptor. When the DSL(DESC_SKIP_LEN) value is equal to zero the descriptor table is taken as contiguous by the DMA in Ring mode.*/
uint32_t alt_desc_size : 1; /*When set the size of the alternate descriptor increases to 32 bytes.*/
uint32_t prog_burst_len : 6; /*These bits indicate the maximum number of beats to be transferred in one DMA transaction. If the number of beats to be transferred is more than 32 then perform the following steps: 1. Set the PBLx8 mode 2. Set the PBL(PROG_BURST_LEN).*/
uint32_t pri_ratio : 2; /*These bits control the priority ratio in the weighted round-robin arbitration between the Rx DMA and Tx DMA. These bits are valid only when Bit 1 (DA) is reset. The priority ratio Rx:Tx represented by each bit: 2'b00 -- 1: 1 2'b01 -- 2: 0 2'b10 -- 3: 1 2'b11 -- 4: 1*/
uint32_t fixed_burst : 1; /*This bit controls whether the AHB master interface performs fixed burst transfers or not. When set the AHB interface uses only SINGLE INCR4 INCR8 or INCR16 during start of the normal burst transfers. When reset the AHB interface uses SINGLE and INCR burst transfer Operations.*/
uint32_t rx_dma_pbl : 6; /*This field indicates the maximum number of beats to be transferred in one Rx DMA transaction. This is the maximum value that is used in a single block Read or Write.The Rx DMA always attempts to burst as specified in the RPBL(RX_DMA_PBL) bit each time it starts a burst transfer on the host bus. You can program RPBL with values of 1 2 4 8 16 and 32. Any other value results in undefined behavior. This field is valid and applicable only when USP(USE_SEP_PBL) is set high.*/
uint32_t use_sep_pbl : 1; /*When set high this bit configures the Rx DMA to use the value configured in Bits[22:17] as PBL. The PBL value in Bits[13:8] is applicable only to the Tx DMA operations. When reset to low the PBL value in Bits[13:8] is applicable for both DMA engines.*/
uint32_t pblx8_mode : 1; /*When set high this bit multiplies the programmed PBL value (Bits[22:17] and Bits[13:8]) eight times. Therefore the DMA transfers the data in 8 16 32 64 128 and 256 beats depending on the PBL value.*/
uint32_t dmaaddralibea : 1; /*When this bit is set high and the FIXED_BURST bit is 1 the AHB interface generates all bursts aligned to the start address LS bits. If the FIXED_BURST bit is 0 the first burst (accessing the start address of data buffer) is not aligned but subsequent bursts are aligned to the address.*/
uint32_t dmamixedburst : 1; /*When this bit is set high and the FIXED_BURST bit is low the AHB master interface starts all bursts of a length more than 16 with INCR (undefined burst) whereas it reverts to fixed burst transfers (INCRx and SINGLE) for burst length of 16 and less.*/
uint32_t reserved27 : 1;
uint32_t reserved28 : 2;
uint32_t reserved30 : 1;
uint32_t reserved31 : 1;
};
uint32_t val;
} dmabusmode;
uint32_t dmatxpolldemand; /*When these bits are written with any value the DMA reads the current descriptor to which the Register (Current Host Transmit Descriptor Register) is pointing. If that descriptor is not available (owned by the Host) the transmission returns to the suspend state and Bit[2] (TU) of Status Register is asserted. If the descriptor is available the transmission resumes.*/
uint32_t dmarxpolldemand; /*When these bits are written with any value the DMA reads the current descriptor to which the Current Host Receive Descriptor Register is pointing. If that descriptor is not available (owned by the Host) the reception returns to the Suspended state and Bit[7] (RU) of Status Register is asserted. If the descriptor is available the Rx DMA returns to the active state.*/
uint32_t dmarxbaseaddr; /*This field contains the base address of the first descriptor in the Receive Descriptor list. The LSB Bits[1:0] are ignored and internally taken as all-zero by the DMA. Therefore these LSB bits are read-only.*/
uint32_t dmatxbaseaddr; /*This field contains the base address of the first descriptor in the Transmit Descriptor list. The LSB Bits[1:0] are ignored and are internally taken as all-zero by the DMA.Therefore these LSB bits are read-only.*/
union {
struct {
uint32_t trans_int : 1; /*This bit indicates that the frame transmission is complete. When transmission is complete Bit[31] (OWN) of TDES0 is reset and the specific frame status information is updated in the Descriptor.*/
uint32_t trans_proc_stop : 1; /*This bit is set when the transmission is stopped.*/
uint32_t trans_buf_unavail : 1; /*This bit indicates that the host owns the Next Descriptor in the Transmit List and the DMA cannot acquire it. Transmission is suspended. Bits[22:20] explain the Transmit Process state transitions. To resume processing Transmit descriptors the host should change the ownership of the descriptor by setting TDES0[31] and then issue a Transmit Poll Demand Command.*/
uint32_t trans_jabber_to : 1; /*This bit indicates that the Transmit Jabber Timer expired which happens when the frame size exceeds 2 048 (10 240 bytes when the Jumbo frame is enabled). When the Jabber Timeout occurs the transmission process is aborted and placed in the Stopped state. This causes the Transmit Jabber Timeout TDES0[14] flag to assert.*/
uint32_t recv_ovflow : 1; /*This bit indicates that the Receive Buffer had an Overflow during frame reception. If the partial frame is transferred to the application the overflow status is set in RDES0[11].*/
uint32_t trans_undflow : 1; /*This bit indicates that the Transmit Buffer had an Underflow during frame transmission. Transmission is suspended and an Underflow Error TDES0[1] is set.*/
uint32_t recv_int : 1; /*This bit indicates that the frame reception is complete. When reception is complete the Bit[31] of RDES1 (Disable Interrupt on Completion) is reset in the last Descriptor and the specific frame status information is updated in the descriptor. The reception remains in the Running state.*/
uint32_t recv_buf_unavail : 1; /*This bit indicates that the host owns the Next Descriptor in the Receive List and the DMA cannot acquire it. The Receive Process is suspended. To resume processing Receive descriptors the host should change the ownership of the descriptor and issue a Receive Poll Demand command. If no Receive Poll Demand is issued the Receive Process resumes when the next recognized incoming frame is received. This bit is set only when the previous Receive Descriptor is owned by the DMA.*/
uint32_t recv_proc_stop : 1; /*This bit is asserted when the Receive Process enters the Stopped state.*/
uint32_t recv_wdt_to : 1; /*When set this bit indicates that the Receive Watchdog Timer expired while receiving the current frame and the current frame is truncated after the watchdog timeout.*/
uint32_t early_trans_int : 1; /*This bit indicates that the frame to be transmitted is fully transferred to the MTL Transmit FIFO.*/
uint32_t reserved11 : 2;
uint32_t fatal_bus_err_int : 1; /*This bit indicates that a bus error occurred as described in Bits [25:23]. When this bit is set the corresponding DMA engine disables all of its bus accesses.*/
uint32_t early_recv_int : 1; /*This bit indicates that the DMA filled the first data buffer of the packet. This bit is cleared when the software writes 1 to this bit or when Bit[6] (RI) of this register is set (whichever occurs earlier).*/
uint32_t abn_int_summ : 1; /*Abnormal Interrupt Summary bit value is the logical OR of the following when the corresponding interrupt bits are enabled in Interrupt Enable Register: Bit[1]: Transmit Process Stopped. Bit[3]: Transmit Jabber Timeout. Bit[4]: Receive FIFO Overflow. Bit[5]: Transmit Underflow. Bit[7]: Receive Buffer Unavailable. Bit[8]: Receive Process Stopped. Bit[9]: Receive Watchdog Timeout. Bit[10]: Early Transmit Interrupt. Bit[13]: Fatal Bus Error. Only unmasked bits affect the Abnormal Interrupt Summary bit. This is a sticky bit and must be cleared (by writing 1 to this bit) each time a corresponding bit which causes AIS to be set is cleared.*/
uint32_t norm_int_summ : 1; /*Normal Interrupt Summary bit value is the logical OR of the following bits when the corresponding interrupt bits are enabled in Interrupt Enable Register: Bit[0]: Transmit Interrupt. Bit[2]: Transmit Buffer Unavailable. Bit[6]: Receive Interrupt. Bit[14]: Early Receive Interrupt. Only unmasked bits affect the Normal Interrupt Summary bit.This is a sticky bit and must be cleared (by writing 1 to this bit) each time a corresponding bit which causes NIS to be set is cleared.*/
uint32_t recv_proc_state : 3; /*This field indicates the Receive DMA FSM state. This field does not generate an interrupt. 3'b000: Stopped. Reset or Stop Receive Command issued. 3'b001: Running. Fetching Receive Transfer Descriptor. 3'b010: Reserved for future use. 3'b011: Running. Waiting for RX packets. 3'b100: Suspended. Receive Descriptor Unavailable. 3'b101: Running. Closing Receive Descriptor. 3'b110: TIME_STAMP write state. 3'b111: Running. Transferring the TX packets data from receive buffer to host memory.*/
uint32_t trans_proc_state : 3; /*This field indicates the Transmit DMA FSM state. This field does not generate an interrupt. 3'b000: Stopped. Reset or Stop Transmit Command issued. 3'b001: Running. Fetching Transmit Transfer Descriptor. 3'b010: Reserved for future use. 3'b011: Running. Waiting for TX packets. 3'b100: Suspended. Receive Descriptor Unavailable. 3'b101: Running. Closing Transmit Descriptor. 3'b110: TIME_STAMP write state. 3'b111: Running. Transferring the TX packets data from transmit buffer to host memory.*/
uint32_t error_bits : 3; /*This field indicates the type of error that caused a Bus Error for example error response on the AHB interface. This field is valid only when Bit[13] (FBI) is set. This field does not generate an interrupt. 3'b000: Error during Rx DMA Write Data Transfer. 3'b011: Error during Tx DMA Read Data Transfer. 3'b100: Error during Rx DMA Descriptor Write Access. 3'b101: Error during Tx DMA Descriptor Write Access. 3'b110: Error during Rx DMA Descriptor Read Access. 3'b111: Error during Tx DMA Descriptor Read Access.*/
uint32_t reserved26 : 1;
uint32_t reserved27 : 1;
uint32_t pmt_int : 1; /*This bit indicates an interrupt event in the PMT module of the ETH_MAC. The software must read the PMT Control and Status Register in the MAC to get the exact cause of interrupt and clear its source to reset this bit to 1'b0.*/
uint32_t ts_tri_int : 1; /*This bit indicates an interrupt event in the Timestamp Generator block of the ETH_MAC.The software must read the corresponding registers in the ETH_MAC to get the exact cause of the interrupt and clear its source to reset this bit to 1'b0.*/
uint32_t reserved30 : 1;
uint32_t reserved31 : 1;
};
uint32_t val;
} dmastatus;
union {
struct {
uint32_t reserved0 : 1;
uint32_t start_stop_rx : 1; /*When this bit is set the Receive process is placed in the Running state. The DMA attempts to acquire the descriptor from the Receive list and processes the incoming frames.When this bit is cleared the Rx DMA operation is stopped after the transfer of the current frame.*/
uint32_t opt_second_frame : 1; /*When this bit is set it instructs the DMA to process the second frame of the Transmit data even before the status for the first frame is obtained.*/
uint32_t rx_thresh_ctrl : 2; /*These two bits control the threshold level of the MTL Receive FIFO. Transfer (request) to DMA starts when the frame size within the MTL Receive FIFO is larger than the threshold. 2'b00: 64， 2'b01: 32， 2'b10: 96， 2'b11: 128 .*/
uint32_t drop_gfrm : 1; /*When set the MAC drops the received giant frames in the Rx FIFO that is frames that are larger than the computed giant frame limit.*/
uint32_t fwd_under_gf : 1; /*When set the Rx FIFO forwards Undersized frames (that is frames with no Error and length less than 64 bytes) including pad-bytes and CRC.*/
uint32_t fwd_err_frame : 1; /*When this bit is reset the Rx FIFO drops frames with error status (CRC error collision error giant frame watchdog timeout or overflow).*/
uint32_t reserved8 : 1;
uint32_t reserved9 : 2;
uint32_t reserved11 : 2;
uint32_t start_stop_transmission_command : 1; /*When this bit is set transmission is placed in the Running state and the DMA checks the Transmit List at the current position for a frame to be transmitted.When this bit is reset the transmission process is placed in the Stopped state after completing the transmission of the current frame.*/
uint32_t tx_thresh_ctrl : 3; /*These bits control the threshold level of the MTL Transmit FIFO. Transmission starts when the frame size within the MTL Transmit FIFO is larger than the threshold. In addition full frames with a length less than the threshold are also transmitted. These bits are used only when Tx_Str_fwd is reset. 3'b000: 64 3'b001: 128 3'b010: 192 3'b011: 256 3'b100: 40 3'b101: 32 3'b110: 24 3'b111: 16 .*/
uint32_t reserved17 : 3;
uint32_t flush_tx_fifo : 1; /*When this bit is set the transmit FIFO controller logic is reset to its default values and thus all data in the Tx FIFO is lost or flushed. This bit is cleared internally when the flushing operation is complete.*/
uint32_t tx_str_fwd : 1; /*When this bit is set transmission starts when a full frame resides in the MTL Transmit FIFO. When this bit is set the Tx_Thresh_Ctrl values specified in Tx_Thresh_Ctrl are ignored.*/
uint32_t reserved22 : 1;
uint32_t reserved23 : 1;
uint32_t dis_flush_recv_frames : 1; /*When this bit is set the Rx DMA does not flush any frames because of the unavailability of receive descriptors or buffers.*/
uint32_t rx_store_forward : 1; /*When this bit is set the MTL reads a frame from the Rx FIFO only after the complete frame has been written to it.*/
uint32_t dis_drop_tcpip_err_fram : 1; /*When this bit is set the MAC does not drop the frames which only have errors detected by the Receive Checksum engine.When this bit is reset all error frames are dropped if the Fwd_Err_Frame bit is reset.*/
uint32_t reserved27 : 5;
};
uint32_t val;
} dmaoperation_mode;
union {
struct {
uint32_t dmain_tie : 1; /*When this bit is set with Normal Interrupt Summary Enable (Bit[16]) the Transmit Interrupt is enabled. When this bit is reset the Transmit Interrupt is disabled.*/
uint32_t dmain_tse : 1; /*When this bit is set with Abnormal Interrupt Summary Enable (Bit[15]) the Transmission Stopped Interrupt is enabled. When this bit is reset the Transmission Stopped Interrupt is disabled.*/
uint32_t dmain_tbue : 1; /*When this bit is set with Normal Interrupt Summary Enable (Bit 16) the Transmit Buffer Unavailable Interrupt is enabled. When this bit is reset the Transmit Buffer Unavailable Interrupt is Disabled.*/
uint32_t dmain_tjte : 1; /*When this bit is set with Abnormal Interrupt Summary Enable (Bit[15]) the Transmit Jabber Timeout Interrupt is enabled. When this bit is reset the Transmit Jabber Timeout Interrupt is disabled.*/
uint32_t dmain_oie : 1; /*When this bit is set with Abnormal Interrupt Summary Enable (Bit[15]) the Receive Overflow Interrupt is enabled. When this bit is reset the Overflow Interrupt is disabled.*/
uint32_t dmain_uie : 1; /*When this bit is set with Abnormal Interrupt Summary Enable (Bit[15]) the Transmit Underflow Interrupt is enabled. When this bit is reset the Underflow Interrupt is disabled.*/
uint32_t dmain_rie : 1; /*When this bit is set with Normal Interrupt Summary Enable (Bit[16]) the Receive Interrupt is enabled. When this bit is reset the Receive Interrupt is disabled.*/
uint32_t dmain_rbue : 1; /*When this bit is set with Abnormal Interrupt Summary Enable (Bit[15]) the Receive Buffer Unavailable Interrupt is enabled. When this bit is reset the Receive Buffer Unavailable Interrupt is disabled.*/
uint32_t dmain_rse : 1; /*When this bit is set with Abnormal Interrupt Summary Enable (Bit[15]) the Receive Stopped Interrupt is enabled. When this bit is reset the Receive Stopped Interrupt is disabled.*/
uint32_t dmain_rwte : 1; /*When this bit is set with Abnormal Interrupt Summary Enable (Bit[15]) the Receive Watchdog Timeout Interrupt is enabled. When this bit is reset the Receive Watchdog Timeout Interrupt is disabled.*/
uint32_t dmain_etie : 1; /*When this bit is set with an Abnormal Interrupt Summary Enable (Bit[15]) the Early Transmit Interrupt is enabled. When this bit is reset the Early Transmit Interrupt is disabled.*/
uint32_t reserved11 : 2;
uint32_t dmain_fbee : 1; /*When this bit is set with Abnormal Interrupt Summary Enable (Bit[15]) the Fatal Bus Error Interrupt is enabled. When this bit is reset the Fatal Bus Error Enable Interrupt is disabled.*/
uint32_t dmain_erie : 1; /*When this bit is set with Normal Interrupt Summary Enable (Bit[16]) the Early Receive Interrupt is enabled. When this bit is reset the Early Receive Interrupt is disabled.*/
uint32_t dmain_aise : 1; /*When this bit is set abnormal interrupt summary is enabled. When this bit is reset the abnormal interrupt summary is disabled. This bit enables the following interrupts in Status Register: Bit[1]: Transmit Process Stopped. Bit[3]: Transmit Jabber Timeout. Bit[4]: Receive Overflow. Bit[5]: Transmit Underflow. Bit[7]: Receive Buffer Unavailable. Bit[8]: Receive Process Stopped. Bit[9]: Receive Watchdog Timeout. Bit[10]: Early Transmit Interrupt. Bit[13]: Fatal Bus Error.*/
uint32_t dmain_nise : 1; /*When this bit is set normal interrupt summary is enabled. When this bit is reset normal interrupt summary is disabled. This bit enables the following interrupts in Status Register: Bit[0]: Transmit Interrupt. Bit[2]: Transmit Buffer Unavailable. Bit[6]: Receive Interrupt. Bit[14]: Early Receive Interrupt.*/
uint32_t reserved17 : 15;
};
uint32_t val;
} dmain_en;
union {
struct {
uint32_t missed_fc : 16; /*This field indicates the number of frames missed by the controller because of the Host Receive Buffer being unavailable. This counter is incremented each time the DMA discards an incoming frame. The counter is cleared when this register is read.*/
uint32_t overflow_bmfc : 1; /*This bit is set every time Missed Frame Counter (Bits[15:0]) overflows that is the DMA discards an incoming frame because of the Host Receive Buffer being unavailable with the missed frame counter at maximum value. In such a scenario the Missed frame counter is reset to all-zeros and this bit indicates that the rollover happened.*/
uint32_t overflow_fc : 11; /*This field indicates the number of frames missed by the application. This counter is incremented each time the MTL FIFO overflows. The counter is cleared when this register is read.*/
uint32_t overflow_bfoc : 1; /*This bit is set every time the Overflow Frame Counter (Bits[27:17]) overflows that is the Rx FIFO overflows with the overflow frame counter at maximum value. In such a scenario the overflow frame counter is reset to all-zeros and this bit indicates that the rollover happened.*/
uint32_t reserved29 : 3;
};
uint32_t val;
} dmamissedfr;
union {
struct {
uint32_t riwtc : 8; /*This bit indicates the number of system clock cycles multiplied by 256 for which the watchdog timer is set. The watchdog timer gets triggered with the programmed value after the Rx DMA completes the transfer of a frame for which the RI(RECV_INT) status bit is not set because of the setting in the corresponding descriptor RDES1[31]. When the watchdog timer runs out the RI bit is set and the timer is stopped. The watchdog timer is reset when the RI bit is set high because of automatic setting of RI as per RDES1[31] of any received frame.*/
uint32_t reserved8 : 24;
};
uint32_t val;
} dmarintwdtimer;
uint32_t reserved_28;
uint32_t reserved_2c;
uint32_t reserved_30;
uint32_t reserved_34;
uint32_t reserved_38;
uint32_t reserved_3c;
uint32_t reserved_40;
uint32_t reserved_44;
uint32_t dmatxcurrdesc; /*The address of the current receive descriptor list. Cleared on Reset.Pointer updated by the DMA during operation.*/
uint32_t dmarxcurrdesc; /*The address of the current receive descriptor list. Cleared on Reset.Pointer updated by the DMA during operation.*/
uint32_t dmatxcurraddr_buf; /*The address of the current receive descriptor list. Cleared on Reset.Pointer updated by the DMA during operation.*/
uint32_t dmarxcurraddr_buf; /*The address of the current receive descriptor list. Cleared on Reset.Pointer updated by the DMA during operation.*/
} emac_dma_dev_t;
extern emac_dma_dev_t EMAC_DMA;
#ifdef __cplusplus
}
#endif

74
tools/sdk/esp32/include/soc/soc/esp32/include/soc/emac_ext_struct.h Normal file
View File

@ -0,0 +1,74 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
typedef volatile struct {
union {
struct {
uint32_t div_num : 4;
uint32_t h_div_num : 4;
uint32_t reserved8 : 24;
};
uint32_t val;
} ex_clkout_conf;
union {
struct {
uint32_t div_num_10m : 6;
uint32_t h_div_num_10m : 6;
uint32_t div_num_100m : 6;
uint32_t h_div_num_100m : 6;
uint32_t clk_sel : 1;
uint32_t reserved25 : 7;
};
uint32_t val;
} ex_oscclk_conf;
union {
struct {
uint32_t ext_en : 1;
uint32_t int_en : 1;
uint32_t reserved2 : 1;
uint32_t mii_clk_tx_en : 1;
uint32_t mii_clk_rx_en : 1;
uint32_t reserved5 : 27;
};
uint32_t val;
} ex_clk_ctrl;
union {
struct {
uint32_t reserved0 : 13;
uint32_t phy_intf_sel : 3;
uint32_t reserved16 : 16;
};
uint32_t val;
} ex_phyinf_conf;
union {
struct {
uint32_t ram_pd_en : 2;
uint32_t reserved2 : 30;
};
uint32_t val;
} pd_sel;
} emac_ext_dev_t;
extern emac_ext_dev_t EMAC_EXT;
#ifdef __cplusplus
}
#endif

345
tools/sdk/esp32/include/soc/soc/esp32/include/soc/emac_mac_struct.h Normal file
View File

@ -0,0 +1,345 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <stdint.h>
typedef volatile struct {
union {
struct {
uint32_t pltf : 2; /*These bits control the number of preamble bytes that are added to the beginning of every Transmit frame. The preamble reduction occurs only when the MAC is operating in the full-duplex mode.2'b00: 7 bytes of preamble. 2'b01: 5 bytes of preamble. 2'b10: 3 bytes of preamble.*/
uint32_t rx : 1; /*When this bit is set the receiver state machine of the MAC is enabled for receiving frames from the MII. When this bit is reset the MAC receive state machine is disabled after the completion of the reception of the current frame and does not receive any further frames from the MII.*/
uint32_t tx : 1; /*When this bit is set the transmit state machine of the MAC is enabled for transmission on the MII. When this bit is reset the MAC transmit state machine is disabled after the completion of the transmission of the current frame and does not transmit any further frames.*/
uint32_t deferralcheck : 1; /*Deferral Check.*/
uint32_t backofflimit : 2; /*The Back-Off limit determines the random integer number (r) of slot time delays (512 bit times for 10/100 Mbps) for which the MAC waits before rescheduling a transmission attempt during retries after a collision. This bit is applicable only in the half-duplex mode. 00: k= min (n 10). 01: k = min (n 8). 10: k = min (n 4). 11: k = min (n 1) n = retransmission attempt. The random integer r takes the value in the Range 0 ~ 2000.*/
uint32_t padcrcstrip : 1; /*When this bit is set the MAC strips the Pad or FCS field on the incoming frames only if the value of the length field is less than 1 536 bytes. All received frames with length field greater than or equal to 1 536 bytes are passed to the application without stripping the Pad or FCS field. When this bit is reset the MAC passes all incoming frames without modifying them to the Host.*/
uint32_t reserved8 : 1;
uint32_t retry : 1; /*When this bit is set the MAC attempts only one transmission. When a collision occurs on the MII interface the MAC ignores the current frame transmission and reports a Frame Abort with excessive collision error in the transmit frame status. When this bit is reset the MAC attempts retries based on the settings of the BL field (Bits [6:5]). This bit is applicable only in the half-duplex Mode.*/
uint32_t rxipcoffload : 1; /*When this bit is set the MAC calculates the 16-bit one's complement of the one's complement sum of all received Ethernet frame payloads. It also checks whether the IPv4 Header checksum (assumed to be bytes 25/26 or 29/30 (VLAN-tagged) of the received Ethernet frame) is correct for the received frame and gives the status in the receive status word. The MAC also appends the 16-bit checksum calculated for the IP header datagram payload (bytes after the IPv4 header) and appends it to the Ethernet frame transferred to the application (when Type 2 COE is deselected). When this bit is reset this function is disabled.*/
uint32_t duplex : 1; /*When this bit is set the MAC operates in the full-duplex mode where it can transmit and receive simultaneously. This bit is read only with default value of 1'b1 in the full-duplex-mode.*/
uint32_t loopback : 1; /*When this bit is set the MAC operates in the loopback mode MII. The MII Receive clock input (CLK_RX) is required for the loopback to work properly because the transmit clock is not looped-back internally.*/
uint32_t rxown : 1; /*When this bit is set the MAC disables the reception of frames when the TX_EN is asserted in the half-duplex mode. When this bit is reset the MAC receives all packets that are given by the PHY while transmitting. This bit is not applicable if the MAC is operating in the full duplex mode.*/
uint32_t fespeed : 1; /*This bit selects the speed in the MII RMII interface. 0: 10 Mbps. 1: 100 Mbps.*/
uint32_t mii : 1; /*This bit selects the Ethernet line speed. It should be set to 1 for 10 or 100 Mbps operations.In 10 or 100 Mbps operations this bit along with FES(EMACFESPEED) bit it selects the exact linespeed. In the 10/100 Mbps-only operations the bit is always 1.*/
uint32_t disablecrs : 1; /*When set high this bit makes the MAC transmitter ignore the MII CRS signal during frame transmission in the half-duplex mode. This request results in no errors generated because of Loss of Carrier or No Carrier during such transmission. When this bit is low the MAC transmitter generates such errors because of Carrier Sense and can even abort the transmissions.*/
uint32_t interframegap : 3; /*These bits control the minimum IFG between frames during transmission. 3'b000: 96 bit times. 3'b001: 88 bit times. 3'b010: 80 bit times. 3'b111: 40 bit times. In the half-duplex mode the minimum IFG can be configured only for 64 bit times (IFG = 100). Lower values are not considered.*/
uint32_t jumboframe : 1; /*When this bit is set the MAC allows Jumbo frames of 9 018 bytes (9 022 bytes for VLAN tagged frames) without reporting a giant frame error in the receive frame status.*/
uint32_t reserved21 : 1;
uint32_t jabber : 1; /*When this bit is set the MAC disables the jabber timer on the transmitter. The MAC can transfer frames of up to 16 383 bytes. When this bit is reset the MAC cuts off the transmitter if the application sends out more than 2 048 bytes of data (10 240 if JE is set high) during Transmission.*/
uint32_t watchdog : 1; /*When this bit is set the MAC disables the watchdog timer on the receiver. The MAC can receive frames of up to 16 383 bytes. When this bit is reset the MAC does not allow a receive frame which more than 2 048 bytes (10 240 if JE is set high) or the value programmed in Register (Watchdog Timeout Register). The MAC cuts off any bytes received after the watchdog limit number of bytes.*/
uint32_t reserved24 : 1;
uint32_t reserved25 : 1;
uint32_t reserved26 : 1;
uint32_t ass2kp : 1; /*When set the MAC considers all frames with up to 2 000 bytes length as normal packets.When Bit[20] (JE) is not set the MAC considers all received frames of size more than 2K bytes as Giant frames. When this bit is reset and Bit[20] (JE) is not set the MAC considers all received frames of size more than 1 518 bytes (1 522 bytes for tagged) as Giant frames. When Bit[20] is set setting this bit has no effect on Giant Frame status.*/
uint32_t sairc : 3; /*This field controls the source address insertion or replacement for all transmitted frames.Bit[30] specifies which MAC Address register (0 or 1) is used for source address insertion or replacement based on the values of Bits [29:28]: 2'b0x: The input signals mti_sa_ctrl_i and ati_sa_ctrl_i control the SA field generation. 2'b10: If Bit[30] is set to 0 the MAC inserts the content of the MAC Address 0 registers in the SA field of all transmitted frames. If Bit[30] is set to 1 the MAC inserts the content of the MAC Address 1 registers in the SA field of all transmitted frames. 2'b11: If Bit[30] is set to 0 the MAC replaces the content of the MAC Address 0 registers in the SA field of all transmitted frames. If Bit[30] is set to 1 the MAC replaces the content of the MAC Address 1 registers in the SA field of all transmitted frames.*/
uint32_t reserved31 : 1;
};
uint32_t val;
} gmacconfig;
union {
struct {
uint32_t pmode : 1; /*When this bit is set the Address Filter module passes all incoming frames irrespective of the destination or source address. The SA or DA Filter Fails status bits of the Receive Status Word are always cleared when PR(PRI_RATIO) is set.*/
uint32_t reserved1 : 1;
uint32_t reserved2 : 1;
uint32_t daif : 1; /*When this bit is set the Address Check block operates in inverse filtering mode for the DA address comparison for both unicast and multicast frames. When reset normal filtering of frames is performed.*/
uint32_t pam : 1; /*When set this bit indicates that all received frames with a multicast destination address (first bit in the destination address field is '1') are passed.*/
uint32_t dbf : 1; /*When this bit is set the AFM(Address Filtering Module) module blocks all incoming broadcast frames. In addition it overrides all other filter settings. When this bit is reset the AFM module passes all received broadcast Frames.*/
uint32_t pcf : 2; /*These bits control the forwarding of all control frames (including unicast and multicast Pause frames). 2'b00: MAC filters all control frames from reaching the application. 2'b01: MAC forwards all control frames except Pause frames to application even if they fail the Address filter. 2'b10: MAC forwards all control frames to application even if they fail the Address Filter. 2'b11: MAC forwards control frames that pass the Address Filter.The following conditions should be true for the Pause frames processing: Condition 1: The MAC is in the full-duplex mode and flow control is enabled by setting Bit 2 (RFE) of Register (Flow Control Register) to 1. Condition 2: The destination address (DA) of the received frame matches the special multicast address or the MAC Address 0 when Bit 3 (UP) of the Register(Flow Control Register) is set. Condition 3: The Type field of the received frame is 0x8808 and the OPCODE field is 0x0001.*/
uint32_t saif : 1; /*When this bit is set the Address Check block operates in inverse filtering mode for the SA address comparison. The frames whose SA matches the SA registers are marked as failing the SA Address filter. When this bit is reset frames whose SA does not match the SA registers are marked as failing the SA Address filter.*/
uint32_t safe : 1; /*When this bit is set the MAC compares the SA field of the received frames with the values programmed in the enabled SA registers. If the comparison fails the MAC drops the frame. When this bit is reset the MAC forwards the received frame to the application with updated SAF bit of the Rx Status depending on the SA address comparison.*/
uint32_t reserved10 : 1;
uint32_t reserved11 : 5;
uint32_t reserved16 : 1;
uint32_t reserved17 : 3;
uint32_t reserved20 : 1;
uint32_t reserved21 : 1;
uint32_t reserved22 : 9;
uint32_t receive_all : 1; /*When this bit is set the MAC Receiver module passes all received frames irrespective of whether they pass the address filter or not to the Application. The result of the SA or DA filtering is updated (pass or fail) in the corresponding bits in the Receive Status Word. When this bit is reset the Receiver module passes only those frames to the Application that pass the SA or DA address Filter.*/
};
uint32_t val;
} gmacff;
uint32_t reserved_1008;
uint32_t reserved_100c;
union {
struct {
uint32_t miibusy : 1; /*This bit should read logic 0 before writing to PHY Addr Register and PHY data Register.During a PHY register access the software sets this bit to 1'b1 to indicate that a Read or Write access is in progress. PHY data Register is invalid until this bit is cleared by the MAC. Therefore PHY data Register (MII Data) should be kept valid until the MAC clears this bit during a PHY Write operation. Similarly for a read operation the contents of Register 5 are not valid until this bit is cleared. The subsequent read or write operation should happen only after the previous operation is complete. Because there is no acknowledgment from the PHY to MAC after a read or write operation is completed there is no change in the functionality of this bit even when the PHY is not Present.*/
uint32_t miiwrite : 1; /*When set this bit indicates to the PHY that this is a Write operation using the MII Data register. If this bit is not set it indicates that this is a Read operation that is placing the data in the MII Data register.*/
uint32_t miicsrclk : 4; /*CSR clock range: 1.0 MHz ~ 2.5 MHz. 4'b0000: When the APB clock frequency is 80 MHz the MDC clock frequency is APB CLK/42 4'b0000: When the APB clock frequency is 40 MHz the MDC clock frequency is APB CLK/26.*/
uint32_t miireg : 5; /*These bits select the desired MII register in the selected PHY device.*/
uint32_t miidev : 5; /*This field indicates which of the 32 possible PHY devices are being accessed.*/
uint32_t reserved16 : 16;
};
uint32_t val;
} emacgmiiaddr;
union {
struct {
uint32_t mii_data : 16; /*This field contains the 16-bit data value read from the PHY after a Management Read operation or the 16-bit data value to be written to the PHY before a Management Write operation.*/
uint32_t reserved16 : 16;
};
uint32_t val;
} emacmiidata;
union {
struct {
uint32_t fcbba : 1; /*This bit initiates a Pause frame in the full-duplex mode and activates the backpressure function in the half-duplex mode if the TFCE bit is set. In the full-duplex mode this bit should be read as 1'b0 before writing to the Flow Control register. To initiate a Pause frame the Application must set this bit to 1'b1. During a transfer of the Control Frame this bit continues to be set to signify that a frame transmission is in progress. After the completion of Pause frame transmission the MAC resets this bit to 1'b0. The Flow Control register should not be written to until this bit is cleared. In the half-duplex mode when this bit is set (and TFCE is set) then backpressure is asserted by the MAC. During backpressure when the MAC receives a new frame the transmitter starts sending a JAM pattern resulting in a collision. When the MAC is configured for the full-duplex mode the BPA(backpressure activate) is automatically disabled.*/
uint32_t tfce : 1; /*In the full-duplex mode when this bit is set the MAC enables the flow control operation to transmit Pause frames. When this bit is reset the flow control operation in the MAC is disabled and the MAC does not transmit any Pause frames. In the half-duplex mode when this bit is set the MAC enables the backpressure operation. When this bit is reset the backpressure feature is Disabled.*/
uint32_t rfce : 1; /*When this bit is set the MAC decodes the received Pause frame and disables its transmitter for a specified (Pause) time. When this bit is reset the decode function of the Pause frame is disabled.*/
uint32_t upfd : 1; /*A pause frame is processed when it has the unique multicast address specified in the IEEE Std 802.3. When this bit is set the MAC can also detect Pause frames with unicast address of the station. This unicast address should be as specified in the EMACADDR0 High Register and EMACADDR0 Low Register. When this bit is reset the MAC only detects Pause frames with unique multicast address.*/
uint32_t plt : 2; /*This field configures the threshold of the Pause timer automatic retransmission of the Pause frame.The threshold values should be always less than the Pause Time configured in Bits[31:16]. For example if PT = 100H (256 slot-times) and PLT = 01 then a second Pause frame is automatically transmitted at 228 (256-28) slot times after the first Pause frame is transmitted. The following list provides the threshold values for different values: 2'b00: The threshold is Pause time minus 4 slot times (PT-4 slot times). 2'b01: The threshold is Pause time minus 28 slot times (PT-28 slot times). 2'b10: The threshold is Pause time minus 144 slot times (PT-144 slot times). 2'b11: The threshold is Pause time minus 256 slot times (PT-256 slot times). The slot time is defined as the time taken to transmit 512 bits (64 bytes) on the MII interface.*/
uint32_t reserved6 : 1;
uint32_t dzpq : 1; /*When this bit is set it disables the automatic generation of the Zero-Quanta Pause frames on the de-assertion of the flow-control signal from the FIFO layer. When this bit is reset normal operation with automatic Zero-Quanta Pause frame generation is enabled.*/
uint32_t reserved8 : 8;
uint32_t pause_time : 16; /*This field holds the value to be used in the Pause Time field in the transmit control frame. If the Pause Time bits is configured to be double-synchronized to the MII clock domain then consecutive writes to this register should be performed only after at least four clock cycles in the destination clock domain.*/
};
uint32_t val;
} gmacfc;
uint32_t reserved_101c;
uint32_t reserved_1020;
union {
struct {
uint32_t macrpes : 1; /*When high this bit indicates that the MAC MII receive protocol engine is actively receiving data and not in IDLE state.*/
uint32_t macrffcs : 2; /*When high this field indicates the active state of the FIFO Read and Write controllers of the MAC Receive Frame Controller Module. MACRFFCS[1] represents the status of FIFO Read controller. MACRFFCS[0] represents the status of small FIFO Write controller.*/
uint32_t reserved3 : 1;
uint32_t mtlrfwcas : 1; /*When high this bit indicates that the MTL Rx FIFO Write Controller is active and is transferring a received frame to the FIFO.*/
uint32_t mtlrfrcs : 2; /*This field gives the state of the Rx FIFO read Controller: 2'b00: IDLE state.2'b01: Reading frame data.2'b10: Reading frame status (or timestamp).2'b11: Flushing the frame data and status.*/
uint32_t reserved7 : 1;
uint32_t mtlrffls : 2; /*This field gives the status of the fill-level of the Rx FIFO: 2'b00: Rx FIFO Empty. 2'b01: Rx FIFO fill-level below flow-control deactivate threshold. 2'b10: Rx FIFO fill-level above flow-control activate threshold. 2'b11: Rx FIFO Full.*/
uint32_t reserved10 : 6;
uint32_t mactpes : 1; /*When high this bit indicates that the MAC MII transmit protocol engine is actively transmitting data and is not in the IDLE state.*/
uint32_t mactfcs : 2; /*This field indicates the state of the MAC Transmit Frame Controller module: 2'b00: IDLE state. 2'b01: Waiting for status of previous frame or IFG or backoff period to be over. 2'b10: Generating and transmitting a Pause frame (in the full-duplex mode). 2'b11: Transferring input frame for transmission.*/
uint32_t mactp : 1; /*When high this bit indicates that the MAC transmitter is in the Pause condition (in the full-duplex-mode) and hence does not schedule any frame for transmission.*/
uint32_t mtltfrcs : 2; /*This field indicates the state of the Tx FIFO Read Controller: 2'b00: IDLE state. 2'b01: READ state (transferring data to the MAC transmitter). 2'b10: Waiting for TxStatus from the MAC transmitter. 2'b11: Writing the received TxStatus or flushing the Tx FIFO.*/
uint32_t mtltfwcs : 1; /*When high this bit indicates that the MTL Tx FIFO Write Controller is active and is transferring data to the Tx FIFO.*/
uint32_t reserved23 : 1;
uint32_t mtltfnes : 1; /*When high this bit indicates that the MTL Tx FIFO is not empty and some data is left for Transmission.*/
uint32_t mtltsffs : 1; /*When high this bit indicates that the MTL TxStatus FIFO is full. Therefore the MTL cannot accept any more frames for transmission.*/
uint32_t reserved26 : 6;
};
uint32_t val;
} emacdebug;
uint32_t pmt_rwuffr; /*The MSB (31st bit) must be zero.Bit j[30:0] is the byte mask. If Bit 1/2/3/4 (byte number) of the byte mask is set the CRC block processes the Filter 1/2/3/4 Offset + j of the incoming packet(PWKPTR is 0/1/2/3).RWKPTR is 0:Filter 0 Byte Mask .RWKPTR is 1:Filter 1 Byte Mask RWKPTR is 2:Filter 2 Byte Mask RWKPTR is 3:Filter 3 Byte Mask RWKPTR is 4:Bit 3/11/19/27 specifies the address type defining the destination address type of the pattern.When the bit is set the pattern applies to only multicast packets*/
union {
struct {
uint32_t pwrdwn : 1; /*When set the MAC receiver drops all received frames until it receives the expected magic packet or remote wake-up frame.This bit must only be set when MGKPKTEN GLBLUCAST or RWKPKTEN bit is set high.*/
uint32_t mgkpkten : 1; /*When set enables generation of a power management event because of magic packet reception.*/
uint32_t rwkpkten : 1; /*When set enables generation of a power management event because of remote wake-up frame reception*/
uint32_t reserved3 : 2;
uint32_t mgkprcvd : 1; /*When set this bit indicates that the power management event is generated because of the reception of a magic packet. This bit is cleared by a Read into this register.*/
uint32_t rwkprcvd : 1; /*When set this bit indicates the power management event is generated because of the reception of a remote wake-up frame. This bit is cleared by a Read into this register.*/
uint32_t reserved7 : 2;
uint32_t glblucast : 1; /*When set enables any unicast packet filtered by the MAC (DAFilter) address recognition to be a remote wake-up frame.*/
uint32_t reserved10 : 14;
uint32_t rwkptr : 5; /*The maximum value of the pointer is 7 the detail information please refer to PMT_RWUFFR.*/
uint32_t reserved29 : 2;
uint32_t rwkfiltrst : 1; /*When this bit is set it resets the RWKPTR register to 3’b000.*/
};
uint32_t val;
} pmt_csr;
union {
struct {
uint32_t tlpien : 1; /*When set this bit indicates that the MAC Transmitter has entered the LPI state because of the setting of the LPIEN bit. This bit is cleared by a read into this register.*/
uint32_t tlpiex : 1; /*When set this bit indicates that the MAC transmitter has exited the LPI state after the user has cleared the LPIEN bit and the LPI_TW_Timer has expired.This bit is cleared by a read into this register.*/
uint32_t rlpien : 1; /*When set this bit indicates that the MAC Receiver has received an LPI pattern and entered the LPI state. This bit is cleared by a read into this register.*/
uint32_t rlpiex : 1; /*When set this bit indicates that the MAC Receiver has stopped receiving the LPI pattern on the MII interface exited the LPI state and resumed the normal reception. This bit is cleared by a read into this register.*/
uint32_t reserved4 : 4;
uint32_t tlpist : 1; /*When set this bit indicates that the MAC is transmitting the LPI pattern on the MII interface.*/
uint32_t rlpist : 1; /*When set this bit indicates that the MAC is receiving the LPI pattern on the MII interface.*/
uint32_t reserved10 : 6;
uint32_t lpien : 1; /*When set this bit instructs the MAC Transmitter to enter the LPI state. When reset this bit instructs the MAC to exit the LPI state and resume normal transmission.This bit is cleared when the LPITXA bit is set and the MAC exits the LPI state because of the arrival of a new packet for transmission.*/
uint32_t pls : 1; /*This bit indicates the link status of the PHY.When set the link is considered to be okay (up) and when reset the link is considered to be down.*/
uint32_t reserved18 : 1;
uint32_t lpitxa : 1; /*This bit controls the behavior of the MAC when it is entering or coming out of the LPI mode on the transmit side.If the LPITXA and LPIEN bits are set to 1 the MAC enters the LPI mode only after all outstanding frames and pending frames have been transmitted. The MAC comes out of the LPI mode when the application sends any frame.When this bit is 0 the LPIEN bit directly controls behavior of the MAC when it is entering or coming out of the LPI mode.*/
uint32_t reserved20 : 12;
};
uint32_t val;
} gmaclpi_crs;
union {
struct {
uint32_t lpi_tw_timer : 16; /*This field specifies the minimum time (in microseconds) for which the MAC waits after it stops transmitting the LPI pattern to the PHY and before it resumes the normal transmission. The TLPIEX status bit is set after the expiry of this timer.*/
uint32_t lpi_ls_timer : 10; /*This field specifies the minimum time (in milliseconds) for which the link status from the PHY should be up (OKAY) before the LPI pattern can be transmitted to the PHY. The MAC does not transmit the LPI pattern even when the LPIEN bit is set unless the LPI_LS_Timer reaches the programmed terminal count. The default value of the LPI_LS_Timer is 1000 (1 sec) as defined in the IEEE standard.*/
uint32_t reserved26 : 6;
};
uint32_t val;
} gmaclpitimerscontrol;
union {
struct {
uint32_t reserved0 : 1;
uint32_t reserved1 : 1;
uint32_t reserved2 : 1;
uint32_t pmtints : 1; /*This bit is set when a magic packet or remote wake-up frame is received in the power-down mode (see Bit[5] and Bit[6] in the PMT Control and Status Register). This bit is cleared when both Bits[6:5] are cleared because of a read operation to the PMT Control and Status register. This bit is valid only when you select the optional PMT module during core configuration.*/
uint32_t reserved4 : 1;
uint32_t reserved5 : 1;
uint32_t reserved6 : 1;
uint32_t reserved7 : 1;
uint32_t reserved8 : 1;
uint32_t reserved9 : 1;
uint32_t lpiis : 1; /*When the Energy Efficient Ethernet feature is enabled this bit is set for any LPI state entry or exit in the MAC Transmitter or Receiver. This bit is cleared on reading Bit[0] of Register (LPI Control and Status Register).*/
uint32_t reserved11 : 1;
uint32_t reserved12 : 20;
};
uint32_t val;
} emacints;
union {
struct {
uint32_t reserved0 : 1;
uint32_t reserved1 : 1;
uint32_t reserved2 : 1;
uint32_t pmtintmask : 1; /*When set this bit disables the assertion of the interrupt signal because of the setting of PMT Interrupt Status bit in Register (Interrupt Status Register).*/
uint32_t reserved4 : 5;
uint32_t reserved9 : 1;
uint32_t lpiintmask : 1; /*When set this bit disables the assertion of the interrupt signal because of the setting of the LPI Interrupt Status bit in Register (Interrupt Status Register).*/
uint32_t reserved11 : 21;
};
uint32_t val;
} emacintmask;
union {
struct {
uint32_t address0_hi : 16; /*This field contains the upper 16 bits (47:32) of the first 6-byte MAC address.The MAC uses this field for filtering the received frames and inserting the MAC address in the Transmit Flow Control (Pause) Frames.*/
uint32_t reserved16 : 15;
uint32_t address_enable0 : 1; /*This bit is always set to 1.*/
};
uint32_t val;
} emacaddr0high;
uint32_t emacaddr0low; /*This field contains the lower 32 bits of the first 6-byte MAC address. This is used by the MAC for filtering the received frames and inserting the MAC address in the Transmit Flow Control (Pause) Frames.*/
union {
struct {
uint32_t mac_address1_hi : 16; /*This field contains the upper 16 bits Bits[47:32] of the second 6-byte MAC Address.*/
uint32_t reserved16 : 8;
uint32_t mask_byte_control : 6; /*These bits are mask control bits for comparison of each of the EMACADDR1 bytes. When set high the MAC does not compare the corresponding byte of received DA or SA with the contents of EMACADDR1 registers. Each bit controls the masking of the bytes as follows: Bit[29]: EMACADDR1 High [15:8]. Bit[28]: EMACADDR1 High [7:0]. Bit[27]: EMACADDR1 Low [31:24]. Bit[24]: EMACADDR1 Low [7:0].You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address.*/
uint32_t source_address : 1; /*When this bit is set the EMACADDR1[47:0] is used to compare with the SA fields of the received frame. When this bit is reset the EMACADDR1[47:0] is used to compare with the DA fields of the received frame.*/
uint32_t address_enable1 : 1; /*When this bit is set the address filter module uses the second MAC address for perfect filtering. When this bit is reset the address filter module ignores the address for filtering.*/
};
uint32_t val;
} emacaddr1high;
uint32_t emacaddr1low; /*This field contains the lower 32 bits of the second 6-byte MAC address.The content of this field is undefined so the register needs to be configured after the initialization Process.*/
union {
struct {
uint32_t mac_address2_hi : 16; /*This field contains the upper 16 bits Bits[47:32] of the third 6-byte MAC address.*/
uint32_t reserved16 : 8;
uint32_t mask_byte_control2 : 6; /*These bits are mask control bits for comparison of each of the EMACADDR2 bytes. When set high the MAC does not compare the corresponding byte of received DA or SA with the contents of EMACADDR2 registers. Each bit controls the masking of the bytes as follows: Bit[29]: EMACADDR2 High [15:8]. Bit[28]: EMACADDR2 High [7:0]. Bit[27]: EMACADDR2 Low [31:24]. Bit[24]: EMACADDR2 Low [7:0].You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address.*/
uint32_t source_address2 : 1; /*When this bit is set the EMACADDR2[47:0] is used to compare with the SA fields of the received frame. When this bit is reset the EMACADDR2[47:0] is used to compare with the DA fields of the received frame.*/
uint32_t address_enable2 : 1; /*When this bit is set the address filter module uses the third MAC address for perfect filtering. When this bit is reset the address filter module ignores the address for filtering.*/
};
uint32_t val;
} emacaddr2high;
uint32_t emacaddr2low; /*This field contains the lower 32 bits of the third 6-byte MAC address. The content of this field is undefined so the register needs to be configured after the initialization process.*/
union {
struct {
uint32_t mac_address3_hi : 16; /*This field contains the upper 16 bits Bits[47:32] of the fourth 6-byte MAC address.*/
uint32_t reserved16 : 8;
uint32_t mask_byte_control3 : 6; /*These bits are mask control bits for comparison of each of the EMACADDR3 bytes. When set high the MAC does not compare the corresponding byte of received DA or SA with the contents of EMACADDR3 registers. Each bit controls the masking of the bytes as follows: Bit[29]: EMACADDR3 High [15:8]. Bit[28]: EMACADDR3 High [7:0]. Bit[27]: EMACADDR3 Low [31:24]. Bit[24]: EMACADDR3 Low [7:0].You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address.*/
uint32_t source_address3 : 1; /*When this bit is set the EMACADDR3[47:0] is used to compare with the SA fields of the received frame. When this bit is reset the EMACADDR3[47:0] is used to compare with the DA fields of the received frame.*/
uint32_t address_enable3 : 1; /*When this bit is set the address filter module uses the fourth MAC address for perfect filtering. When this bit is reset the address filter module ignores the address for filtering.*/
};
uint32_t val;
} emacaddr3high;
uint32_t emacaddr3low; /*This field contains the lower 32 bits of the fourth 6-byte MAC address.The content of this field is undefined so the register needs to be configured after the initialization Process.*/
union {
struct {
uint32_t mac_address4_hi : 16; /*This field contains the upper 16 bits Bits[47:32] of the fifth 6-byte MAC address.*/
uint32_t reserved16 : 8;
uint32_t mask_byte_control4 : 6; /*These bits are mask control bits for comparison of each of the EMACADDR4 bytes. When set high the MAC does not compare the corresponding byte of received DA or SA with the contents of EMACADDR4 registers. Each bit controls the masking of the bytes as follows: Bit[29]: EMACADDR4 High [15:8]. Bit[28]: EMACADDR4 High [7:0]. Bit[27]: EMACADDR4 Low [31:24]. Bit[24]: EMACADDR4 Low [7:0].You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address.*/
uint32_t source_address4 : 1; /*When this bit is set the EMACADDR4[47:0] is used to compare with the SA fields of the received frame. When this bit is reset the EMACADDR4[47:0] is used to compare with the DA fields of the received frame.*/
uint32_t address_enable4 : 1; /*When this bit is set the address filter module uses the fifth MAC address for perfect filtering. When this bit is reset the address filter module ignores the address for filtering.*/
};
uint32_t val;
} emacaddr4high;
uint32_t emacaddr4low; /*This field contains the lower 32 bits of the fifth 6-byte MAC address. The content of this field is undefined so the register needs to be configured after the initialization process.*/
union {
struct {
uint32_t mac_address5_hi : 16; /*This field contains the upper 16 bits Bits[47:32] of the sixth 6-byte MAC address.*/
uint32_t reserved16 : 8;
uint32_t mask_byte_control5 : 6; /*These bits are mask control bits for comparison of each of the EMACADDR5 bytes. When set high the MAC does not compare the corresponding byte of received DA or SA with the contents of EMACADDR5 registers. Each bit controls the masking of the bytes as follows: Bit[29]: EMACADDR5 High [15:8]. Bit[28]: EMACADDR5 High [7:0]. Bit[27]: EMACADDR5 Low [31:24]. Bit[24]: EMACADDR5 Low [7:0].You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address.*/
uint32_t source_address5 : 1; /*When this bit is set the EMACADDR5[47:0] is used to compare with the SA fields of the received frame. When this bit is reset the EMACADDR5[47:0] is used to compare with the DA fields of the received frame.*/
uint32_t address_enable5 : 1; /*When this bit is set the address filter module uses the sixth MAC address for perfect filtering. When this bit is reset the address filter module ignores the address for filtering.*/
};
uint32_t val;
} emacaddr5high;
uint32_t emacaddr5low; /*This field contains the lower 32 bits of the sixth 6-byte MAC address. The content of this field is undefined so the register needs to be configured after the initialization process.*/
union {
struct {
uint32_t mac_address6_hi : 16; /*This field contains the upper 16 bits Bits[47:32] of the seventh 6-byte MAC Address.*/
uint32_t reserved16 : 8;
uint32_t mask_byte_control6 : 6; /*These bits are mask control bits for comparison of each of the EMACADDR6 bytes. When set high the MAC does not compare the corresponding byte of received DA or SA with the contents of EMACADDR6 registers. Each bit controls the masking of the bytes as follows: Bit[29]: EMACADDR6 High [15:8]. Bit[28]: EMACADDR6 High [7:0]. Bit[27]: EMACADDR6 Low [31:24]. Bit[24]: EMACADDR6 Low [7:0].You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address.*/
uint32_t source_address6 : 1; /*When this bit is set the EMACADDR6[47:0] is used to compare with the SA fields of the received frame. When this bit is reset the EMACADDR6[47:0] is used to compare with the DA fields of the received frame.*/
uint32_t address_enable6 : 1; /*When this bit is set the address filter module uses the seventh MAC address for perfect filtering. When this bit is reset the address filter module ignores the address for filtering.*/
};
uint32_t val;
} emacaddr6high;
uint32_t emacaddr6low; /*This field contains the lower 32 bits of the seventh 6-byte MAC address.The content of this field is undefined so the register needs to be configured after the initialization Process.*/
union {
struct {
uint32_t mac_address7_hi : 16; /*This field contains the upper 16 bits Bits[47:32] of the eighth 6-byte MAC Address.*/
uint32_t reserved16 : 8;
uint32_t mask_byte_control7 : 6; /*These bits are mask control bits for comparison of each of the EMACADDR7 bytes. When set high the MAC does not compare the corresponding byte of received DA or SA with the contents of EMACADDR7 registers. Each bit controls the masking of the bytes as follows: Bit[29]: EMACADDR7 High [15:8]. Bit[28]: EMACADDR7 High [7:0]. Bit[27]: EMACADDR7 Low [31:24]. Bit[24]: EMACADDR7 Low [7:0].You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address.*/
uint32_t source_address7 : 1; /*When this bit is set the EMACADDR7[47:0] is used to compare with the SA fields of the received frame. When this bit is reset the EMACADDR7[47:0] is used to compare with the DA fields of the received frame.*/
uint32_t address_enable7 : 1; /*When this bit is set the address filter module uses the eighth MAC address for perfect filtering. When this bit is reset the address filter module ignores the address for filtering.*/
};
uint32_t val;
} emacaddr7high;
uint32_t emacaddr7low; /*This field contains the lower 32 bits of the eighth 6-byte MAC address.The content of this field is undefined so the register needs to be configured after the initialization Process.*/
uint32_t reserved_1080;
uint32_t reserved_1084;
uint32_t reserved_1088;
uint32_t reserved_108c;
uint32_t reserved_1090;
uint32_t reserved_1094;
uint32_t reserved_1098;
uint32_t reserved_109c;
uint32_t reserved_10a0;
uint32_t reserved_10a4;
uint32_t reserved_10a8;
uint32_t reserved_10ac;
uint32_t reserved_10b0;
uint32_t reserved_10b4;
uint32_t reserved_10b8;
uint32_t reserved_10bc;
uint32_t reserved_10c0;
uint32_t reserved_10c4;
uint32_t reserved_10c8;
uint32_t reserved_10cc;
uint32_t reserved_10d0;
uint32_t reserved_10d4;
union {
struct {
uint32_t link_mode : 1; /*This bit indicates the current mode of operation of the link: 1'b0: Half-duplex mode. 1'b1: Full-duplex mode.*/
uint32_t link_speed : 2; /*This bit indicates the current speed of the link: 2'b00: 2.5 MHz. 2'b01: 25 MHz. 2'b10: 125 MHz.*/
uint32_t reserved3 : 1;
uint32_t jabber_timeout : 1; /*This bit indicates whether there is jabber timeout error (1'b1) in the received Frame.*/
uint32_t reserved5 : 1;
uint32_t reserved6 : 10;
uint32_t reserved16 : 1;
uint32_t reserved17 : 15;
};
uint32_t val;
} emaccstatus;
union {
struct {
uint32_t wdogto : 14; /*When Bit[16] (PWE) is set and Bit[23] (WD) of EMACCONFIG_REG is reset this field is used as watchdog timeout for a received frame. If the length of a received frame exceeds the value of this field such frame is terminated and declared as an error frame.*/
uint32_t reserved14 : 2;
uint32_t pwdogen : 1; /*When this bit is set and Bit[23] (WD) of EMACCONFIG_REG is reset the WTO field (Bits[13:0]) is used as watchdog timeout for a received frame. When this bit is cleared the watchdog timeout for a received frame is controlled by the setting of Bit[23] (WD) and Bit[20] (JE) in EMACCONFIG_REG.*/
uint32_t reserved17 : 15;
};
uint32_t val;
} emacwdogto;
} emac_mac_dev_t;
extern emac_mac_dev_t EMAC_MAC;
#ifdef __cplusplus
}
#endif

41
tools/sdk/esp32/include/soc/soc/esp32/include/soc/fe_reg.h Normal file
View File

@ -0,0 +1,41 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "soc/soc.h"
/* Some of the RF frontend control registers.
* PU/PD fields defined here are used in sleep related functions.
*/
#define FE_GEN_CTRL (DR_REG_FE_BASE + 0x0090)
#define FE_IQ_EST_FORCE_PU (BIT(5))
#define FE_IQ_EST_FORCE_PU_M (BIT(5))
#define FE_IQ_EST_FORCE_PU_V 1
#define FE_IQ_EST_FORCE_PU_S 5
#define FE_IQ_EST_FORCE_PD (BIT(4))
#define FE_IQ_EST_FORCE_PD_M (BIT(4))
#define FE_IQ_EST_FORCE_PD_V 1
#define FE_IQ_EST_FORCE_PD_S 4
#define FE2_TX_INTERP_CTRL (DR_REG_FE2_BASE + 0x00f0)
#define FE2_TX_INF_FORCE_PU (BIT(10))
#define FE2_TX_INF_FORCE_PU_M (BIT(10))
#define FE2_TX_INF_FORCE_PU_V 1
#define FE2_TX_INF_FORCE_PU_S 10
#define FE2_TX_INF_FORCE_PD (BIT(9))
#define FE2_TX_INF_FORCE_PD_M (BIT(9))
#define FE2_TX_INF_FORCE_PD_V 1
#define FE2_TX_INF_FORCE_PD_S 9

52
tools/sdk/esp32/include/soc/soc/esp32/include/soc/frc_timer_reg.h Normal file
View File

@ -0,0 +1,52 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_FRC_TIMER_REG_H_
#define _SOC_FRC_TIMER_REG_H_
#include "soc.h"
/**
* These are the register definitions for "legacy" timers
*/
#define REG_FRC_TIMER_BASE(i) (DR_REG_FRC_TIMER_BASE + i*0x20)
#define FRC_TIMER_LOAD_REG(i) (REG_FRC_TIMER_BASE(i) + 0x0) // timer load value (23 bit for i==0, 32 bit for i==1)
#define FRC_TIMER_LOAD_VALUE(i) ((i == 0)?0x007FFFFF:0xffffffff)
#define FRC_TIMER_LOAD_VALUE_S 0
#define FRC_TIMER_COUNT_REG(i) (REG_FRC_TIMER_BASE(i) + 0x4) // timer count value (23 bit for i==0, 32 bit for i==1)
#define FRC_TIMER_COUNT ((i == 0)?0x007FFFFF:0xffffffff)
#define FRC_TIMER_COUNT_S 0
#define FRC_TIMER_CTRL_REG(i) (REG_FRC_TIMER_BASE(i) + 0x8)
#define FRC_TIMER_INT_STATUS (BIT(8)) // interrupt status (RO)
#define FRC_TIMER_ENABLE (BIT(7)) // enable timer
#define FRC_TIMER_AUTOLOAD (BIT(6)) // enable autoload
#define FRC_TIMER_PRESCALER 0x00000007
#define FRC_TIMER_PRESCALER_S 1
#define FRC_TIMER_PRESCALER_1 (0 << FRC_TIMER_PRESCALER_S)
#define FRC_TIMER_PRESCALER_16 (2 << FRC_TIMER_PRESCALER_S)
#define FRC_TIMER_PRESCALER_256 (4 << FRC_TIMER_PRESCALER_S)
#define FRC_TIMER_LEVEL_INT (BIT(0)) // 1: level, 0: edge
#define FRC_TIMER_INT_REG(i) (REG_FRC_TIMER_BASE(i) + 0xC)
#define FRC_TIMER_INT_CLR (BIT(0)) // clear interrupt
#define FRC_TIMER_ALARM_REG(i) (REG_FRC_TIMER_BASE(i) + 0x10) // timer alarm value; register only present for i == 1
#define FRC_TIMER_ALARM 0xFFFFFFFF
#define FRC_TIMER_ALARM_S 0
#endif //_SOC_FRC_TIMER_REG_H_

48
tools/sdk/esp32/include/soc/soc/esp32/include/soc/gpio_caps.h Normal file
View File

@ -0,0 +1,48 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
// ESP32 has 1 GPIO peripheral
#define SOC_GPIO_PORT (1)
#define GPIO_PIN_COUNT (40)
// On ESP32 those PADs which have RTC functions must set pullup/down/capability via RTC register.
// On ESP32-S2, Digital IOs have their own registers to control pullup/down/capability, independent with RTC registers.
#define GPIO_SUPPORTS_RTC_INDEPENDENT (0)
// Force hold is a new function of ESP32-S2
#define GPIO_SUPPORTS_FORCE_HOLD (0)
#define GPIO_APP_CPU_INTR_ENA (BIT(0))
#define GPIO_APP_CPU_NMI_INTR_ENA (BIT(1))
#define GPIO_PRO_CPU_INTR_ENA (BIT(2))
#define GPIO_PRO_CPU_NMI_INTR_ENA (BIT(3))
#define GPIO_SDIO_EXT_INTR_ENA (BIT(4))
#define GPIO_MODE_DEF_DISABLE (0)
#define GPIO_MODE_DEF_INPUT (BIT0)
#define GPIO_MODE_DEF_OUTPUT (BIT1)
#define GPIO_MODE_DEF_OD (BIT2)
#define GPIO_IS_VALID_GPIO(gpio_num) ((gpio_num < GPIO_PIN_COUNT && GPIO_PIN_MUX_REG[gpio_num] != 0)) /*!< Check whether it is a valid GPIO number */
#define GPIO_IS_VALID_OUTPUT_GPIO(gpio_num) ((GPIO_IS_VALID_GPIO(gpio_num)) && (gpio_num < 34)) /*!< Check whether it can be a valid GPIO number of output mode */
#define GPIO_MASK_CONTAIN_INPUT_GPIO(gpio_mask) ((gpio_mask & (GPIO_SEL_34 | GPIO_SEL_35 | GPIO_SEL_36 | GPIO_SEL_37 | GPIO_SEL_38 | GPIO_SEL_39))) /*!< Check whether it contains input io */
#ifdef __cplusplus
}
#endif

8238
tools/sdk/esp32/include/soc/soc/esp32/include/soc/gpio_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

160
tools/sdk/esp32/include/soc/soc/esp32/include/soc/gpio_sd_reg.h Normal file
View File

@ -0,0 +1,160 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_GPIO_SD_REG_H_
#define _SOC_GPIO_SD_REG_H_
#include "soc.h"
#define GPIO_SIGMADELTA0_REG (DR_REG_GPIO_SD_BASE + 0x0000)
/* GPIO_SD0_PRESCALE : R/W ;bitpos:[15:8] ;default: 8'hff ; */
/*description: */
#define GPIO_SD0_PRESCALE 0x000000FF
#define GPIO_SD0_PRESCALE_M ((GPIO_SD0_PRESCALE_V)<<(GPIO_SD0_PRESCALE_S))
#define GPIO_SD0_PRESCALE_V 0xFF
#define GPIO_SD0_PRESCALE_S 8
/* GPIO_SD0_IN : R/W ;bitpos:[7:0] ;default: 8'h0 ; */
/*description: */
#define GPIO_SD0_IN 0x000000FF
#define GPIO_SD0_IN_M ((GPIO_SD0_IN_V)<<(GPIO_SD0_IN_S))
#define GPIO_SD0_IN_V 0xFF
#define GPIO_SD0_IN_S 0
#define GPIO_SIGMADELTA1_REG (DR_REG_GPIO_SD_BASE + 0x0004)
/* GPIO_SD1_PRESCALE : R/W ;bitpos:[15:8] ;default: 8'hff ; */
/*description: */
#define GPIO_SD1_PRESCALE 0x000000FF
#define GPIO_SD1_PRESCALE_M ((GPIO_SD1_PRESCALE_V)<<(GPIO_SD1_PRESCALE_S))
#define GPIO_SD1_PRESCALE_V 0xFF
#define GPIO_SD1_PRESCALE_S 8
/* GPIO_SD1_IN : R/W ;bitpos:[7:0] ;default: 8'h0 ; */
/*description: */
#define GPIO_SD1_IN 0x000000FF
#define GPIO_SD1_IN_M ((GPIO_SD1_IN_V)<<(GPIO_SD1_IN_S))
#define GPIO_SD1_IN_V 0xFF
#define GPIO_SD1_IN_S 0
#define GPIO_SIGMADELTA2_REG (DR_REG_GPIO_SD_BASE + 0x0008)
/* GPIO_SD2_PRESCALE : R/W ;bitpos:[15:8] ;default: 8'hff ; */
/*description: */
#define GPIO_SD2_PRESCALE 0x000000FF
#define GPIO_SD2_PRESCALE_M ((GPIO_SD2_PRESCALE_V)<<(GPIO_SD2_PRESCALE_S))
#define GPIO_SD2_PRESCALE_V 0xFF
#define GPIO_SD2_PRESCALE_S 8
/* GPIO_SD2_IN : R/W ;bitpos:[7:0] ;default: 8'h0 ; */
/*description: */
#define GPIO_SD2_IN 0x000000FF
#define GPIO_SD2_IN_M ((GPIO_SD2_IN_V)<<(GPIO_SD2_IN_S))
#define GPIO_SD2_IN_V 0xFF
#define GPIO_SD2_IN_S 0
#define GPIO_SIGMADELTA3_REG (DR_REG_GPIO_SD_BASE + 0x000c)
/* GPIO_SD3_PRESCALE : R/W ;bitpos:[15:8] ;default: 8'hff ; */
/*description: */
#define GPIO_SD3_PRESCALE 0x000000FF
#define GPIO_SD3_PRESCALE_M ((GPIO_SD3_PRESCALE_V)<<(GPIO_SD3_PRESCALE_S))
#define GPIO_SD3_PRESCALE_V 0xFF
#define GPIO_SD3_PRESCALE_S 8
/* GPIO_SD3_IN : R/W ;bitpos:[7:0] ;default: 8'h0 ; */
/*description: */
#define GPIO_SD3_IN 0x000000FF
#define GPIO_SD3_IN_M ((GPIO_SD3_IN_V)<<(GPIO_SD3_IN_S))
#define GPIO_SD3_IN_V 0xFF
#define GPIO_SD3_IN_S 0
#define GPIO_SIGMADELTA4_REG (DR_REG_GPIO_SD_BASE + 0x0010)
/* GPIO_SD4_PRESCALE : R/W ;bitpos:[15:8] ;default: 8'hff ; */
/*description: */
#define GPIO_SD4_PRESCALE 0x000000FF
#define GPIO_SD4_PRESCALE_M ((GPIO_SD4_PRESCALE_V)<<(GPIO_SD4_PRESCALE_S))
#define GPIO_SD4_PRESCALE_V 0xFF
#define GPIO_SD4_PRESCALE_S 8
/* GPIO_SD4_IN : R/W ;bitpos:[7:0] ;default: 8'h0 ; */
/*description: */
#define GPIO_SD4_IN 0x000000FF
#define GPIO_SD4_IN_M ((GPIO_SD4_IN_V)<<(GPIO_SD4_IN_S))
#define GPIO_SD4_IN_V 0xFF
#define GPIO_SD4_IN_S 0
#define GPIO_SIGMADELTA5_REG (DR_REG_GPIO_SD_BASE + 0x0014)
/* GPIO_SD5_PRESCALE : R/W ;bitpos:[15:8] ;default: 8'hff ; */
/*description: */
#define GPIO_SD5_PRESCALE 0x000000FF
#define GPIO_SD5_PRESCALE_M ((GPIO_SD5_PRESCALE_V)<<(GPIO_SD5_PRESCALE_S))
#define GPIO_SD5_PRESCALE_V 0xFF
#define GPIO_SD5_PRESCALE_S 8
/* GPIO_SD5_IN : R/W ;bitpos:[7:0] ;default: 8'h0 ; */
/*description: */
#define GPIO_SD5_IN 0x000000FF
#define GPIO_SD5_IN_M ((GPIO_SD5_IN_V)<<(GPIO_SD5_IN_S))
#define GPIO_SD5_IN_V 0xFF
#define GPIO_SD5_IN_S 0
#define GPIO_SIGMADELTA6_REG (DR_REG_GPIO_SD_BASE + 0x0018)
/* GPIO_SD6_PRESCALE : R/W ;bitpos:[15:8] ;default: 8'hff ; */
/*description: */
#define GPIO_SD6_PRESCALE 0x000000FF
#define GPIO_SD6_PRESCALE_M ((GPIO_SD6_PRESCALE_V)<<(GPIO_SD6_PRESCALE_S))
#define GPIO_SD6_PRESCALE_V 0xFF
#define GPIO_SD6_PRESCALE_S 8
/* GPIO_SD6_IN : R/W ;bitpos:[7:0] ;default: 8'h0 ; */
/*description: */
#define GPIO_SD6_IN 0x000000FF
#define GPIO_SD6_IN_M ((GPIO_SD6_IN_V)<<(GPIO_SD6_IN_S))
#define GPIO_SD6_IN_V 0xFF
#define GPIO_SD6_IN_S 0
#define GPIO_SIGMADELTA7_REG (DR_REG_GPIO_SD_BASE + 0x001c)
/* GPIO_SD7_PRESCALE : R/W ;bitpos:[15:8] ;default: 8'hff ; */
/*description: */
#define GPIO_SD7_PRESCALE 0x000000FF
#define GPIO_SD7_PRESCALE_M ((GPIO_SD7_PRESCALE_V)<<(GPIO_SD7_PRESCALE_S))
#define GPIO_SD7_PRESCALE_V 0xFF
#define GPIO_SD7_PRESCALE_S 8
/* GPIO_SD7_IN : R/W ;bitpos:[7:0] ;default: 8'h0 ; */
/*description: */
#define GPIO_SD7_IN 0x000000FF
#define GPIO_SD7_IN_M ((GPIO_SD7_IN_V)<<(GPIO_SD7_IN_S))
#define GPIO_SD7_IN_V 0xFF
#define GPIO_SD7_IN_S 0
#define GPIO_SIGMADELTA_CG_REG (DR_REG_GPIO_SD_BASE + 0x0020)
/* GPIO_SD_CLK_EN : R/W ;bitpos:[31] ;default: 1'h0 ; */
/*description: */
#define GPIO_SD_CLK_EN (BIT(31))
#define GPIO_SD_CLK_EN_M (BIT(31))
#define GPIO_SD_CLK_EN_V 0x1
#define GPIO_SD_CLK_EN_S 31
#define GPIO_SIGMADELTA_MISC_REG (DR_REG_GPIO_SD_BASE + 0x0024)
/* GPIO_SPI_SWAP : R/W ;bitpos:[31] ;default: 1'h0 ; */
/*description: */
#define GPIO_SPI_SWAP (BIT(31))
#define GPIO_SPI_SWAP_M (BIT(31))
#define GPIO_SPI_SWAP_V 0x1
#define GPIO_SPI_SWAP_S 31
#define GPIO_SIGMADELTA_VERSION_REG (DR_REG_GPIO_SD_BASE + 0x0028)
/* GPIO_SD_DATE : R/W ;bitpos:[27:0] ;default: 28'h1506190 ; */
/*description: */
#define GPIO_SD_DATE 0x0FFFFFFF
#define GPIO_SD_DATE_M ((GPIO_SD_DATE_V)<<(GPIO_SD_DATE_S))
#define GPIO_SD_DATE_V 0xFFFFFFF
#define GPIO_SD_DATE_S 0
#define SIGMADELTA_GPIO_SD_DATE_VERSION 0x1506190
#endif /*_SOC_GPIO_SD_REG_H_ */

60
tools/sdk/esp32/include/soc/soc/esp32/include/soc/gpio_sd_struct.h Normal file
View File

@ -0,0 +1,60 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_GPIO_SD_STRUCT_H_
#define _SOC_GPIO_SD_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct gpio_sd_dev_s {
union {
struct {
uint32_t duty: 8;
uint32_t prescale: 8;
uint32_t reserved16: 16;
};
uint32_t val;
} channel[8];
union {
struct {
uint32_t reserved0: 31;
uint32_t clk_en: 1;
};
uint32_t val;
} cg;
union {
struct {
uint32_t reserved0: 31;
uint32_t spi_swap: 1;
};
uint32_t val;
} misc;
union {
struct {
uint32_t date: 28;
uint32_t reserved28: 4;
};
uint32_t val;
} version;
} gpio_sd_dev_t;
extern gpio_sd_dev_t SIGMADELTA;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_GPIO_SD_STRUCT_H_ */

422
tools/sdk/esp32/include/soc/soc/esp32/include/soc/gpio_sig_map.h Normal file
View File

@ -0,0 +1,422 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_GPIO_SIG_MAP_H_
#define _SOC_GPIO_SIG_MAP_H_
#define SPICLK_IN_IDX 0
#define SPICLK_OUT_IDX 0
#define SPIQ_IN_IDX 1
#define SPIQ_OUT_IDX 1
#define SPID_IN_IDX 2
#define SPID_OUT_IDX 2
#define SPIHD_IN_IDX 3
#define SPIHD_OUT_IDX 3
#define SPIWP_IN_IDX 4
#define SPIWP_OUT_IDX 4
#define SPICS0_IN_IDX 5
#define SPICS0_OUT_IDX 5
#define SPICS1_IN_IDX 6
#define SPICS1_OUT_IDX 6
#define SPICS2_IN_IDX 7
#define SPICS2_OUT_IDX 7
#define HSPICLK_IN_IDX 8
#define HSPICLK_OUT_IDX 8
#define HSPIQ_IN_IDX 9
#define HSPIQ_OUT_IDX 9
#define HSPID_IN_IDX 10
#define HSPID_OUT_IDX 10
#define HSPICS0_IN_IDX 11
#define HSPICS0_OUT_IDX 11
#define HSPIHD_IN_IDX 12
#define HSPIHD_OUT_IDX 12
#define HSPIWP_IN_IDX 13
#define HSPIWP_OUT_IDX 13
#define U0RXD_IN_IDX 14
#define U0TXD_OUT_IDX 14
#define U0CTS_IN_IDX 15
#define U0RTS_OUT_IDX 15
#define U0DSR_IN_IDX 16
#define U0DTR_OUT_IDX 16
#define U1RXD_IN_IDX 17
#define U1TXD_OUT_IDX 17
#define U1CTS_IN_IDX 18
#define U1RTS_OUT_IDX 18
#define I2CM_SCL_O_IDX 19
#define I2CM_SDA_I_IDX 20
#define I2CM_SDA_O_IDX 20
#define EXT_I2C_SCL_O_IDX 21
#define EXT_I2C_SDA_O_IDX 22
#define EXT_I2C_SDA_I_IDX 22
#define I2S0O_BCK_IN_IDX 23
#define I2S0O_BCK_OUT_IDX 23
#define I2S1O_BCK_IN_IDX 24
#define I2S1O_BCK_OUT_IDX 24
#define I2S0O_WS_IN_IDX 25
#define I2S0O_WS_OUT_IDX 25
#define I2S1O_WS_IN_IDX 26
#define I2S1O_WS_OUT_IDX 26
#define I2S0I_BCK_IN_IDX 27
#define I2S0I_BCK_OUT_IDX 27
#define I2S0I_WS_IN_IDX 28
#define I2S0I_WS_OUT_IDX 28
#define I2CEXT0_SCL_IN_IDX 29
#define I2CEXT0_SCL_OUT_IDX 29
#define I2CEXT0_SDA_IN_IDX 30
#define I2CEXT0_SDA_OUT_IDX 30
#define PWM0_SYNC0_IN_IDX 31
#define SDIO_TOHOST_INT_OUT_IDX 31
#define PWM0_SYNC1_IN_IDX 32
#define PWM0_OUT0A_IDX 32
#define PWM0_SYNC2_IN_IDX 33
#define PWM0_OUT0B_IDX 33
#define PWM0_F0_IN_IDX 34
#define PWM0_OUT1A_IDX 34
#define PWM0_F1_IN_IDX 35
#define PWM0_OUT1B_IDX 35
#define PWM0_F2_IN_IDX 36
#define PWM0_OUT2A_IDX 36
#define GPIO_BT_ACTIVE_IDX 37
#define PWM0_OUT2B_IDX 37
#define GPIO_BT_PRIORITY_IDX 38
#define PCNT_SIG_CH0_IN0_IDX 39
#define PCNT_SIG_CH1_IN0_IDX 40
#define GPIO_WLAN_ACTIVE_IDX 40
#define PCNT_CTRL_CH0_IN0_IDX 41
#define BB_DIAG0_IDX 41
#define PCNT_CTRL_CH1_IN0_IDX 42
#define BB_DIAG1_IDX 42
#define PCNT_SIG_CH0_IN1_IDX 43
#define BB_DIAG2_IDX 43
#define PCNT_SIG_CH1_IN1_IDX 44
#define BB_DIAG3_IDX 44
#define PCNT_CTRL_CH0_IN1_IDX 45
#define BB_DIAG4_IDX 45
#define PCNT_CTRL_CH1_IN1_IDX 46
#define BB_DIAG5_IDX 46
#define PCNT_SIG_CH0_IN2_IDX 47
#define BB_DIAG6_IDX 47
#define PCNT_SIG_CH1_IN2_IDX 48
#define BB_DIAG7_IDX 48
#define PCNT_CTRL_CH0_IN2_IDX 49
#define BB_DIAG8_IDX 49
#define PCNT_CTRL_CH1_IN2_IDX 50
#define BB_DIAG9_IDX 50
#define PCNT_SIG_CH0_IN3_IDX 51
#define BB_DIAG10_IDX 51
#define PCNT_SIG_CH1_IN3_IDX 52
#define BB_DIAG11_IDX 52
#define PCNT_CTRL_CH0_IN3_IDX 53
#define BB_DIAG12_IDX 53
#define PCNT_CTRL_CH1_IN3_IDX 54
#define BB_DIAG13_IDX 54
#define PCNT_SIG_CH0_IN4_IDX 55
#define BB_DIAG14_IDX 55
#define PCNT_SIG_CH1_IN4_IDX 56
#define BB_DIAG15_IDX 56
#define PCNT_CTRL_CH0_IN4_IDX 57
#define BB_DIAG16_IDX 57
#define PCNT_CTRL_CH1_IN4_IDX 58
#define BB_DIAG17_IDX 58
#define BB_DIAG18_IDX 59
#define BB_DIAG19_IDX 60
#define HSPICS1_IN_IDX 61
#define HSPICS1_OUT_IDX 61
#define HSPICS2_IN_IDX 62
#define HSPICS2_OUT_IDX 62
#define VSPICLK_IN_IDX 63
#define VSPICLK_OUT_IDX 63
#define VSPIQ_IN_IDX 64
#define VSPIQ_OUT_IDX 64
#define VSPID_IN_IDX 65
#define VSPID_OUT_IDX 65
#define VSPIHD_IN_IDX 66
#define VSPIHD_OUT_IDX 66
#define VSPIWP_IN_IDX 67
#define VSPIWP_OUT_IDX 67
#define VSPICS0_IN_IDX 68
#define VSPICS0_OUT_IDX 68
#define VSPICS1_IN_IDX 69
#define VSPICS1_OUT_IDX 69
#define VSPICS2_IN_IDX 70
#define VSPICS2_OUT_IDX 70
#define PCNT_SIG_CH0_IN5_IDX 71
#define LEDC_HS_SIG_OUT0_IDX 71
#define PCNT_SIG_CH1_IN5_IDX 72
#define LEDC_HS_SIG_OUT1_IDX 72
#define PCNT_CTRL_CH0_IN5_IDX 73
#define LEDC_HS_SIG_OUT2_IDX 73
#define PCNT_CTRL_CH1_IN5_IDX 74
#define LEDC_HS_SIG_OUT3_IDX 74
#define PCNT_SIG_CH0_IN6_IDX 75
#define LEDC_HS_SIG_OUT4_IDX 75
#define PCNT_SIG_CH1_IN6_IDX 76
#define LEDC_HS_SIG_OUT5_IDX 76
#define PCNT_CTRL_CH0_IN6_IDX 77
#define LEDC_HS_SIG_OUT6_IDX 77
#define PCNT_CTRL_CH1_IN6_IDX 78
#define LEDC_HS_SIG_OUT7_IDX 78
#define PCNT_SIG_CH0_IN7_IDX 79
#define LEDC_LS_SIG_OUT0_IDX 79
#define PCNT_SIG_CH1_IN7_IDX 80
#define LEDC_LS_SIG_OUT1_IDX 80
#define PCNT_CTRL_CH0_IN7_IDX 81
#define LEDC_LS_SIG_OUT2_IDX 81
#define PCNT_CTRL_CH1_IN7_IDX 82
#define LEDC_LS_SIG_OUT3_IDX 82
#define RMT_SIG_IN0_IDX 83
#define LEDC_LS_SIG_OUT4_IDX 83
#define RMT_SIG_IN1_IDX 84
#define LEDC_LS_SIG_OUT5_IDX 84
#define RMT_SIG_IN2_IDX 85
#define LEDC_LS_SIG_OUT6_IDX 85
#define RMT_SIG_IN3_IDX 86
#define LEDC_LS_SIG_OUT7_IDX 86
#define RMT_SIG_IN4_IDX 87
#define RMT_SIG_OUT0_IDX 87
#define RMT_SIG_IN5_IDX 88
#define RMT_SIG_OUT1_IDX 88
#define RMT_SIG_IN6_IDX 89
#define RMT_SIG_OUT2_IDX 89
#define RMT_SIG_IN7_IDX 90
#define RMT_SIG_OUT3_IDX 90
#define RMT_SIG_OUT4_IDX 91
#define RMT_SIG_OUT5_IDX 92
#define EXT_ADC_START_IDX 93
#define RMT_SIG_OUT6_IDX 93
#define CAN_RX_IDX 94
#define RMT_SIG_OUT7_IDX 94
#define I2CEXT1_SCL_IN_IDX 95
#define I2CEXT1_SCL_OUT_IDX 95
#define I2CEXT1_SDA_IN_IDX 96
#define I2CEXT1_SDA_OUT_IDX 96
#define HOST_CARD_DETECT_N_1_IDX 97
#define HOST_CCMD_OD_PULLUP_EN_N_IDX 97
#define HOST_CARD_DETECT_N_2_IDX 98
#define HOST_RST_N_1_IDX 98
#define HOST_CARD_WRITE_PRT_1_IDX 99
#define HOST_RST_N_2_IDX 99
#define HOST_CARD_WRITE_PRT_2_IDX 100
#define GPIO_SD0_OUT_IDX 100
#define HOST_CARD_INT_N_1_IDX 101
#define GPIO_SD1_OUT_IDX 101
#define HOST_CARD_INT_N_2_IDX 102
#define GPIO_SD2_OUT_IDX 102
#define PWM1_SYNC0_IN_IDX 103
#define GPIO_SD3_OUT_IDX 103
#define PWM1_SYNC1_IN_IDX 104
#define GPIO_SD4_OUT_IDX 104
#define PWM1_SYNC2_IN_IDX 105
#define GPIO_SD5_OUT_IDX 105
#define PWM1_F0_IN_IDX 106
#define GPIO_SD6_OUT_IDX 106
#define PWM1_F1_IN_IDX 107
#define GPIO_SD7_OUT_IDX 107
#define PWM1_F2_IN_IDX 108
#define PWM1_OUT0A_IDX 108
#define PWM0_CAP0_IN_IDX 109
#define PWM1_OUT0B_IDX 109
#define PWM0_CAP1_IN_IDX 110
#define PWM1_OUT1A_IDX 110
#define PWM0_CAP2_IN_IDX 111
#define PWM1_OUT1B_IDX 111
#define PWM1_CAP0_IN_IDX 112
#define PWM1_OUT2A_IDX 112
#define PWM1_CAP1_IN_IDX 113
#define PWM1_OUT2B_IDX 113
#define PWM1_CAP2_IN_IDX 114
#define PWM2_OUT1H_IDX 114
#define PWM2_FLTA_IDX 115
#define PWM2_OUT1L_IDX 115
#define PWM2_FLTB_IDX 116
#define PWM2_OUT2H_IDX 116
#define PWM2_CAP1_IN_IDX 117
#define PWM2_OUT2L_IDX 117
#define PWM2_CAP2_IN_IDX 118
#define PWM2_OUT3H_IDX 118
#define PWM2_CAP3_IN_IDX 119
#define PWM2_OUT3L_IDX 119
#define PWM3_FLTA_IDX 120
#define PWM2_OUT4H_IDX 120
#define PWM3_FLTB_IDX 121
#define PWM2_OUT4L_IDX 121
#define PWM3_CAP1_IN_IDX 122
#define PWM3_CAP2_IN_IDX 123
#define CAN_TX_IDX 123
#define PWM3_CAP3_IN_IDX 124
#define CAN_BUS_OFF_ON_IDX 124
#define CAN_CLKOUT_IDX 125
#define SPID4_IN_IDX 128
#define SPID4_OUT_IDX 128
#define SPID5_IN_IDX 129
#define SPID5_OUT_IDX 129
#define SPID6_IN_IDX 130
#define SPID6_OUT_IDX 130
#define SPID7_IN_IDX 131
#define SPID7_OUT_IDX 131
#define HSPID4_IN_IDX 132
#define HSPID4_OUT_IDX 132
#define HSPID5_IN_IDX 133
#define HSPID5_OUT_IDX 133
#define HSPID6_IN_IDX 134
#define HSPID6_OUT_IDX 134
#define HSPID7_IN_IDX 135
#define HSPID7_OUT_IDX 135
#define VSPID4_IN_IDX 136
#define VSPID4_OUT_IDX 136
#define VSPID5_IN_IDX 137
#define VSPID5_OUT_IDX 137
#define VSPID6_IN_IDX 138
#define VSPID6_OUT_IDX 138
#define VSPID7_IN_IDX 139
#define VSPID7_OUT_IDX 139
#define I2S0I_DATA_IN0_IDX 140
#define I2S0O_DATA_OUT0_IDX 140
#define I2S0I_DATA_IN1_IDX 141
#define I2S0O_DATA_OUT1_IDX 141
#define I2S0I_DATA_IN2_IDX 142
#define I2S0O_DATA_OUT2_IDX 142
#define I2S0I_DATA_IN3_IDX 143
#define I2S0O_DATA_OUT3_IDX 143
#define I2S0I_DATA_IN4_IDX 144
#define I2S0O_DATA_OUT4_IDX 144
#define I2S0I_DATA_IN5_IDX 145
#define I2S0O_DATA_OUT5_IDX 145
#define I2S0I_DATA_IN6_IDX 146
#define I2S0O_DATA_OUT6_IDX 146
#define I2S0I_DATA_IN7_IDX 147
#define I2S0O_DATA_OUT7_IDX 147
#define I2S0I_DATA_IN8_IDX 148
#define I2S0O_DATA_OUT8_IDX 148
#define I2S0I_DATA_IN9_IDX 149
#define I2S0O_DATA_OUT9_IDX 149
#define I2S0I_DATA_IN10_IDX 150
#define I2S0O_DATA_OUT10_IDX 150
#define I2S0I_DATA_IN11_IDX 151
#define I2S0O_DATA_OUT11_IDX 151
#define I2S0I_DATA_IN12_IDX 152
#define I2S0O_DATA_OUT12_IDX 152
#define I2S0I_DATA_IN13_IDX 153
#define I2S0O_DATA_OUT13_IDX 153
#define I2S0I_DATA_IN14_IDX 154
#define I2S0O_DATA_OUT14_IDX 154
#define I2S0I_DATA_IN15_IDX 155
#define I2S0O_DATA_OUT15_IDX 155
#define I2S0O_DATA_OUT16_IDX 156
#define I2S0O_DATA_OUT17_IDX 157
#define I2S0O_DATA_OUT18_IDX 158
#define I2S0O_DATA_OUT19_IDX 159
#define I2S0O_DATA_OUT20_IDX 160
#define I2S0O_DATA_OUT21_IDX 161
#define I2S0O_DATA_OUT22_IDX 162
#define I2S0O_DATA_OUT23_IDX 163
#define I2S1I_BCK_IN_IDX 164
#define I2S1I_BCK_OUT_IDX 164
#define I2S1I_WS_IN_IDX 165
#define I2S1I_WS_OUT_IDX 165
#define I2S1I_DATA_IN0_IDX 166
#define I2S1O_DATA_OUT0_IDX 166
#define I2S1I_DATA_IN1_IDX 167
#define I2S1O_DATA_OUT1_IDX 167
#define I2S1I_DATA_IN2_IDX 168
#define I2S1O_DATA_OUT2_IDX 168
#define I2S1I_DATA_IN3_IDX 169
#define I2S1O_DATA_OUT3_IDX 169
#define I2S1I_DATA_IN4_IDX 170
#define I2S1O_DATA_OUT4_IDX 170
#define I2S1I_DATA_IN5_IDX 171
#define I2S1O_DATA_OUT5_IDX 171
#define I2S1I_DATA_IN6_IDX 172
#define I2S1O_DATA_OUT6_IDX 172
#define I2S1I_DATA_IN7_IDX 173
#define I2S1O_DATA_OUT7_IDX 173
#define I2S1I_DATA_IN8_IDX 174
#define I2S1O_DATA_OUT8_IDX 174
#define I2S1I_DATA_IN9_IDX 175
#define I2S1O_DATA_OUT9_IDX 175
#define I2S1I_DATA_IN10_IDX 176
#define I2S1O_DATA_OUT10_IDX 176
#define I2S1I_DATA_IN11_IDX 177
#define I2S1O_DATA_OUT11_IDX 177
#define I2S1I_DATA_IN12_IDX 178
#define I2S1O_DATA_OUT12_IDX 178
#define I2S1I_DATA_IN13_IDX 179
#define I2S1O_DATA_OUT13_IDX 179
#define I2S1I_DATA_IN14_IDX 180
#define I2S1O_DATA_OUT14_IDX 180
#define I2S1I_DATA_IN15_IDX 181
#define I2S1O_DATA_OUT15_IDX 181
#define I2S1O_DATA_OUT16_IDX 182
#define I2S1O_DATA_OUT17_IDX 183
#define I2S1O_DATA_OUT18_IDX 184
#define I2S1O_DATA_OUT19_IDX 185
#define I2S1O_DATA_OUT20_IDX 186
#define I2S1O_DATA_OUT21_IDX 187
#define I2S1O_DATA_OUT22_IDX 188
#define I2S1O_DATA_OUT23_IDX 189
#define I2S0I_H_SYNC_IDX 190
#define PWM3_OUT1H_IDX 190
#define I2S0I_V_SYNC_IDX 191
#define PWM3_OUT1L_IDX 191
#define I2S0I_H_ENABLE_IDX 192
#define PWM3_OUT2H_IDX 192
#define I2S1I_H_SYNC_IDX 193
#define PWM3_OUT2L_IDX 193
#define I2S1I_V_SYNC_IDX 194
#define PWM3_OUT3H_IDX 194
#define I2S1I_H_ENABLE_IDX 195
#define PWM3_OUT3L_IDX 195
#define PWM3_OUT4H_IDX 196
#define PWM3_OUT4L_IDX 197
#define U2RXD_IN_IDX 198
#define U2TXD_OUT_IDX 198
#define U2CTS_IN_IDX 199
#define U2RTS_OUT_IDX 199
#define EMAC_MDC_I_IDX 200
#define EMAC_MDC_O_IDX 200
#define EMAC_MDI_I_IDX 201
#define EMAC_MDO_O_IDX 201
#define EMAC_CRS_I_IDX 202
#define EMAC_CRS_O_IDX 202
#define EMAC_COL_I_IDX 203
#define EMAC_COL_O_IDX 203
#define PCMFSYNC_IN_IDX 204
#define BT_AUDIO0_IRQ_IDX 204
#define PCMCLK_IN_IDX 205
#define BT_AUDIO1_IRQ_IDX 205
#define PCMDIN_IDX 206
#define BT_AUDIO2_IRQ_IDX 206
#define BLE_AUDIO0_IRQ_IDX 207
#define BLE_AUDIO1_IRQ_IDX 208
#define BLE_AUDIO2_IRQ_IDX 209
#define PCMFSYNC_OUT_IDX 210
#define PCMCLK_OUT_IDX 211
#define PCMDOUT_IDX 212
#define BLE_AUDIO_SYNC0_P_IDX 213
#define BLE_AUDIO_SYNC1_P_IDX 214
#define BLE_AUDIO_SYNC2_P_IDX 215
#define ANT_SEL0_IDX 216
#define ANT_SEL1_IDX 217
#define ANT_SEL2_IDX 218
#define ANT_SEL3_IDX 219
#define ANT_SEL4_IDX 220
#define ANT_SEL5_IDX 221
#define ANT_SEL6_IDX 222
#define ANT_SEL7_IDX 223
#define SIG_IN_FUNC224_IDX 224
#define SIG_IN_FUNC225_IDX 225
#define SIG_IN_FUNC226_IDX 226
#define SIG_IN_FUNC227_IDX 227
#define SIG_IN_FUNC228_IDX 228
#define SIG_GPIO_OUT_IDX 256
#endif /* _SOC_GPIO_SIG_MAP_H_ */

216
tools/sdk/esp32/include/soc/soc/esp32/include/soc/gpio_struct.h Normal file
View File

@ -0,0 +1,216 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_GPIO_STRUCT_H_
#define _SOC_GPIO_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct gpio_dev_s {
uint32_t bt_select; /*NA*/
uint32_t out; /*GPIO0~31 output value*/
uint32_t out_w1ts; /*GPIO0~31 output value write 1 to set*/
uint32_t out_w1tc; /*GPIO0~31 output value write 1 to clear*/
union {
struct {
uint32_t data: 8; /*GPIO32~39 output value*/
uint32_t reserved8: 24;
};
uint32_t val;
} out1;
union {
struct {
uint32_t data: 8; /*GPIO32~39 output value write 1 to set*/
uint32_t reserved8: 24;
};
uint32_t val;
} out1_w1ts;
union {
struct {
uint32_t data: 8; /*GPIO32~39 output value write 1 to clear*/
uint32_t reserved8: 24;
};
uint32_t val;
} out1_w1tc;
union {
struct {
uint32_t sel: 8; /*SDIO PADS on/off control from outside*/
uint32_t reserved8: 24;
};
uint32_t val;
} sdio_select;
uint32_t enable; /*GPIO0~31 output enable*/
uint32_t enable_w1ts; /*GPIO0~31 output enable write 1 to set*/
uint32_t enable_w1tc; /*GPIO0~31 output enable write 1 to clear*/
union {
struct {
uint32_t data: 8; /*GPIO32~39 output enable*/
uint32_t reserved8: 24;
};
uint32_t val;
} enable1;
union {
struct {
uint32_t data: 8; /*GPIO32~39 output enable write 1 to set*/
uint32_t reserved8: 24;
};
uint32_t val;
} enable1_w1ts;
union {
struct {
uint32_t data: 8; /*GPIO32~39 output enable write 1 to clear*/
uint32_t reserved8: 24;
};
uint32_t val;
} enable1_w1tc;
union {
struct {
uint32_t strapping: 16; /*GPIO strapping results: {2'd0 boot_sel_dig[7:1] vsdio_boot_sel boot_sel_chip[5:0]} . Boot_sel_dig[7:1]: {U0RXD SD_CLK SD_CMD SD_DATA0 SD_DATA1 SD_DATA2 SD_DATA3} . vsdio_boot_sel: MTDI. boot_sel_chip[5:0]: {GPIO0 U0TXD GPIO2 GPIO4 MTDO GPIO5} */
uint32_t reserved16:16;
};
uint32_t val;
} strap;
uint32_t in; /*GPIO0~31 input value*/
union {
struct {
uint32_t data: 8; /*GPIO32~39 input value*/
uint32_t reserved8: 24;
};
uint32_t val;
} in1;
uint32_t status; /*GPIO0~31 interrupt status*/
uint32_t status_w1ts; /*GPIO0~31 interrupt status write 1 to set*/
uint32_t status_w1tc; /*GPIO0~31 interrupt status write 1 to clear*/
union {
struct {
uint32_t intr_st: 8; /*GPIO32~39 interrupt status*/
uint32_t reserved8: 24;
};
uint32_t val;
} status1;
union {
struct {
uint32_t intr_st: 8; /*GPIO32~39 interrupt status write 1 to set*/
uint32_t reserved8: 24;
};
uint32_t val;
} status1_w1ts;
union {
struct {
uint32_t intr_st: 8; /*GPIO32~39 interrupt status write 1 to clear*/
uint32_t reserved8: 24;
};
uint32_t val;
} status1_w1tc;
uint32_t reserved_5c;
uint32_t acpu_int; /*GPIO0~31 APP CPU interrupt status*/
uint32_t acpu_nmi_int; /*GPIO0~31 APP CPU non-maskable interrupt status*/
uint32_t pcpu_int; /*GPIO0~31 PRO CPU interrupt status*/
uint32_t pcpu_nmi_int; /*GPIO0~31 PRO CPU non-maskable interrupt status*/
uint32_t cpusdio_int; /*SDIO's extent GPIO0~31 interrupt*/
union {
struct {
uint32_t intr: 8; /*GPIO32~39 APP CPU interrupt status*/
uint32_t reserved8: 24;
};
uint32_t val;
} acpu_int1;
union {
struct {
uint32_t intr: 8; /*GPIO32~39 APP CPU non-maskable interrupt status*/
uint32_t reserved8: 24;
};
uint32_t val;
} acpu_nmi_int1;
union {
struct {
uint32_t intr: 8; /*GPIO32~39 PRO CPU interrupt status*/
uint32_t reserved8: 24;
};
uint32_t val;
} pcpu_int1;
union {
struct {
uint32_t intr: 8; /*GPIO32~39 PRO CPU non-maskable interrupt status*/
uint32_t reserved8: 24;
};
uint32_t val;
} pcpu_nmi_int1;
union {
struct {
uint32_t intr: 8; /*SDIO's extent GPIO32~39 interrupt*/
uint32_t reserved8: 24;
};
uint32_t val;
} cpusdio_int1;
union {
struct {
uint32_t reserved0: 2;
uint32_t pad_driver: 1; /*if set to 0: normal output if set to 1: open drain*/
uint32_t reserved3: 4;
uint32_t int_type: 3; /*if set to 0: GPIO interrupt disable if set to 1: rising edge trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
uint32_t wakeup_enable: 1; /*GPIO wake up enable only available in light sleep*/
uint32_t config: 2; /*NA*/
uint32_t int_ena: 5; /*bit0: APP CPU interrupt enable bit1: APP CPU non-maskable interrupt enable bit3: PRO CPU interrupt enable bit4: PRO CPU non-maskable interrupt enable bit5: SDIO's extent interrupt enable*/
uint32_t reserved18: 14;
};
uint32_t val;
} pin[40];
union {
struct {
uint32_t rtc_max: 10;
uint32_t reserved10: 21;
uint32_t start: 1;
};
uint32_t val;
} cali_conf;
union {
struct {
uint32_t value_sync2: 20;
uint32_t reserved20: 10;
uint32_t rdy_real: 1;
uint32_t rdy_sync2: 1;
};
uint32_t val;
} cali_data;
union {
struct {
uint32_t func_sel: 6; /*select one of the 256 inputs*/
uint32_t sig_in_inv: 1; /*revert the value of the input if you want to revert please set the value to 1*/
uint32_t sig_in_sel: 1; /*if the slow signal bypass the io matrix or not if you want setting the value to 1*/
uint32_t reserved8: 24; /*The 256 registers below are selection control for 256 input signals connected to GPIO matrix's 40 GPIO input if GPIO_FUNCx_IN_SEL is set to n(0<=n<40): it means GPIOn input is used for input signal x if GPIO_FUNCx_IN_SEL is set to 0x38: the input signal x is set to 1 if GPIO_FUNCx_IN_SEL is set to 0x30: the input signal x is set to 0*/
};
uint32_t val;
} func_in_sel_cfg[256];
union {
struct {
uint32_t func_sel: 9; /*select one of the 256 output to 40 GPIO*/
uint32_t inv_sel: 1; /*invert the output value if you want to revert the output value setting the value to 1*/
uint32_t oen_sel: 1; /*weather using the logical oen signal or not using the value setting by the register*/
uint32_t oen_inv_sel: 1; /*invert the output enable value if you want to revert the output enable value setting the value to 1*/
uint32_t reserved12: 20; /*The 40 registers below are selection control for 40 GPIO output if GPIO_FUNCx_OUT_SEL is set to n(0<=n<256): it means GPIOn input is used for output signal x if GPIO_FUNCx_OUT_INV_SEL is set to 1 the output signal x is set to ~value. if GPIO_FUNC0_OUT_SEL is 256 or GPIO_FUNC0_OEN_SEL is 1 using GPIO_ENABLE_DATA[x] for the enable value else using the signal enable*/
};
uint32_t val;
} func_out_sel_cfg[40];
} gpio_dev_t;
extern gpio_dev_t GPIO;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_GPIO_STRUCT_H_ */

248
tools/sdk/esp32/include/soc/soc/esp32/include/soc/hinf_reg.h Normal file
View File

@ -0,0 +1,248 @@
// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_HINF_REG_H_
#define _SOC_HINF_REG_H_
#include "soc.h"
#define HINF_CFG_DATA0_REG (DR_REG_HINF_BASE + 0x0)
/* HINF_DEVICE_ID_FN1 : R/W ;bitpos:[31:16] ;default: 16'h2222 ; */
/*description: */
#define HINF_DEVICE_ID_FN1 0x0000FFFF
#define HINF_DEVICE_ID_FN1_M ((HINF_DEVICE_ID_FN1_V)<<(HINF_DEVICE_ID_FN1_S))
#define HINF_DEVICE_ID_FN1_V 0xFFFF
#define HINF_DEVICE_ID_FN1_S 16
/* HINF_USER_ID_FN1 : R/W ;bitpos:[15:0] ;default: 16'h6666 ; */
/*description: */
#define HINF_USER_ID_FN1 0x0000FFFF
#define HINF_USER_ID_FN1_M ((HINF_USER_ID_FN1_V)<<(HINF_USER_ID_FN1_S))
#define HINF_USER_ID_FN1_V 0xFFFF
#define HINF_USER_ID_FN1_S 0
#define HINF_CFG_DATA1_REG (DR_REG_HINF_BASE + 0x4)
/* HINF_SDIO20_CONF1 : R/W ;bitpos:[31:29] ;default: 3'h0 ; */
/*description: */
#define HINF_SDIO20_CONF1 0x00000007
#define HINF_SDIO20_CONF1_M ((HINF_SDIO20_CONF1_V)<<(HINF_SDIO20_CONF1_S))
#define HINF_SDIO20_CONF1_V 0x7
#define HINF_SDIO20_CONF1_S 29
/* HINF_FUNC2_EPS : RO ;bitpos:[28] ;default: 1'b0 ; */
/*description: */
#define HINF_FUNC2_EPS (BIT(28))
#define HINF_FUNC2_EPS_M (BIT(28))
#define HINF_FUNC2_EPS_V 0x1
#define HINF_FUNC2_EPS_S 28
/* HINF_SDIO_VER : R/W ;bitpos:[27:16] ;default: 12'h111 ; */
/*description: */
#define HINF_SDIO_VER 0x00000FFF
#define HINF_SDIO_VER_M ((HINF_SDIO_VER_V)<<(HINF_SDIO_VER_S))
#define HINF_SDIO_VER_V 0xFFF
#define HINF_SDIO_VER_S 16
/* HINF_SDIO20_CONF0 : R/W ;bitpos:[15:12] ;default: 4'b0 ; */
/*description: */
#define HINF_SDIO20_CONF0 0x0000000F
#define HINF_SDIO20_CONF0_M ((HINF_SDIO20_CONF0_V)<<(HINF_SDIO20_CONF0_S))
#define HINF_SDIO20_CONF0_V 0xF
#define HINF_SDIO20_CONF0_S 12
/* HINF_IOENABLE1 : RO ;bitpos:[11] ;default: 1'b0 ; */
/*description: */
#define HINF_IOENABLE1 (BIT(11))
#define HINF_IOENABLE1_M (BIT(11))
#define HINF_IOENABLE1_V 0x1
#define HINF_IOENABLE1_S 11
/* HINF_EMP : RO ;bitpos:[10] ;default: 1'b0 ; */
/*description: */
#define HINF_EMP (BIT(10))
#define HINF_EMP_M (BIT(10))
#define HINF_EMP_V 0x1
#define HINF_EMP_S 10
/* HINF_FUNC1_EPS : RO ;bitpos:[9] ;default: 1'b0 ; */
/*description: */
#define HINF_FUNC1_EPS (BIT(9))
#define HINF_FUNC1_EPS_M (BIT(9))
#define HINF_FUNC1_EPS_V 0x1
#define HINF_FUNC1_EPS_S 9
/* HINF_CD_DISABLE : RO ;bitpos:[8] ;default: 1'b0 ; */
/*description: */
#define HINF_CD_DISABLE (BIT(8))
#define HINF_CD_DISABLE_M (BIT(8))
#define HINF_CD_DISABLE_V 0x1
#define HINF_CD_DISABLE_S 8
/* HINF_IOENABLE2 : RO ;bitpos:[7] ;default: 1'b0 ; */
/*description: */
#define HINF_IOENABLE2 (BIT(7))
#define HINF_IOENABLE2_M (BIT(7))
#define HINF_IOENABLE2_V 0x1
#define HINF_IOENABLE2_S 7
/* HINF_SDIO_INT_MASK : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: */
#define HINF_SDIO_INT_MASK (BIT(6))
#define HINF_SDIO_INT_MASK_M (BIT(6))
#define HINF_SDIO_INT_MASK_V 0x1
#define HINF_SDIO_INT_MASK_S 6
/* HINF_SDIO_IOREADY2 : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: */
#define HINF_SDIO_IOREADY2 (BIT(5))
#define HINF_SDIO_IOREADY2_M (BIT(5))
#define HINF_SDIO_IOREADY2_V 0x1
#define HINF_SDIO_IOREADY2_S 5
/* HINF_SDIO_CD_ENABLE : R/W ;bitpos:[4] ;default: 1'b1 ; */
/*description: */
#define HINF_SDIO_CD_ENABLE (BIT(4))
#define HINF_SDIO_CD_ENABLE_M (BIT(4))
#define HINF_SDIO_CD_ENABLE_V 0x1
#define HINF_SDIO_CD_ENABLE_S 4
/* HINF_HIGHSPEED_MODE : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: */
#define HINF_HIGHSPEED_MODE (BIT(3))
#define HINF_HIGHSPEED_MODE_M (BIT(3))
#define HINF_HIGHSPEED_MODE_V 0x1
#define HINF_HIGHSPEED_MODE_S 3
/* HINF_HIGHSPEED_ENABLE : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: */
#define HINF_HIGHSPEED_ENABLE (BIT(2))
#define HINF_HIGHSPEED_ENABLE_M (BIT(2))
#define HINF_HIGHSPEED_ENABLE_V 0x1
#define HINF_HIGHSPEED_ENABLE_S 2
/* HINF_SDIO_IOREADY1 : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: */
#define HINF_SDIO_IOREADY1 (BIT(1))
#define HINF_SDIO_IOREADY1_M (BIT(1))
#define HINF_SDIO_IOREADY1_V 0x1
#define HINF_SDIO_IOREADY1_S 1
/* HINF_SDIO_ENABLE : R/W ;bitpos:[0] ;default: 1'b1 ; */
/*description: */
#define HINF_SDIO_ENABLE (BIT(0))
#define HINF_SDIO_ENABLE_M (BIT(0))
#define HINF_SDIO_ENABLE_V 0x1
#define HINF_SDIO_ENABLE_S 0
#define HINF_CFG_DATA7_REG (DR_REG_HINF_BASE + 0x1C)
/* HINF_SDIO_IOREADY0 : R/W ;bitpos:[17] ;default: 1'b1 ; */
/*description: */
#define HINF_SDIO_IOREADY0 (BIT(17))
#define HINF_SDIO_IOREADY0_M (BIT(17))
#define HINF_SDIO_IOREADY0_V 0x1
#define HINF_SDIO_IOREADY0_S 17
/* HINF_SDIO_RST : R/W ;bitpos:[16] ;default: 1'b0 ; */
/*description: */
#define HINF_SDIO_RST (BIT(16))
#define HINF_SDIO_RST_M (BIT(16))
#define HINF_SDIO_RST_V 0x1
#define HINF_SDIO_RST_S 16
/* HINF_CHIP_STATE : R/W ;bitpos:[15:8] ;default: 8'b0 ; */
/*description: */
#define HINF_CHIP_STATE 0x000000FF
#define HINF_CHIP_STATE_M ((HINF_CHIP_STATE_V)<<(HINF_CHIP_STATE_S))
#define HINF_CHIP_STATE_V 0xFF
#define HINF_CHIP_STATE_S 8
/* HINF_PIN_STATE : R/W ;bitpos:[7:0] ;default: 8'b0 ; */
/*description: */
#define HINF_PIN_STATE 0x000000FF
#define HINF_PIN_STATE_M ((HINF_PIN_STATE_V)<<(HINF_PIN_STATE_S))
#define HINF_PIN_STATE_V 0xFF
#define HINF_PIN_STATE_S 0
#define HINF_CIS_CONF0_REG (DR_REG_HINF_BASE + 0x20)
/* HINF_CIS_CONF_W0 : R/W ;bitpos:[31:0] ;default: 32'hffffffff ; */
/*description: */
#define HINF_CIS_CONF_W0 0xFFFFFFFF
#define HINF_CIS_CONF_W0_M ((HINF_CIS_CONF_W0_V)<<(HINF_CIS_CONF_W0_S))
#define HINF_CIS_CONF_W0_V 0xFFFFFFFF
#define HINF_CIS_CONF_W0_S 0
#define HINF_CIS_CONF1_REG (DR_REG_HINF_BASE + 0x24)
/* HINF_CIS_CONF_W1 : R/W ;bitpos:[31:0] ;default: 32'hffffffff ; */
/*description: */
#define HINF_CIS_CONF_W1 0xFFFFFFFF
#define HINF_CIS_CONF_W1_M ((HINF_CIS_CONF_W1_V)<<(HINF_CIS_CONF_W1_S))
#define HINF_CIS_CONF_W1_V 0xFFFFFFFF
#define HINF_CIS_CONF_W1_S 0
#define HINF_CIS_CONF2_REG (DR_REG_HINF_BASE + 0x28)
/* HINF_CIS_CONF_W2 : R/W ;bitpos:[31:0] ;default: 32'hffffffff ; */
/*description: */
#define HINF_CIS_CONF_W2 0xFFFFFFFF
#define HINF_CIS_CONF_W2_M ((HINF_CIS_CONF_W2_V)<<(HINF_CIS_CONF_W2_S))
#define HINF_CIS_CONF_W2_V 0xFFFFFFFF
#define HINF_CIS_CONF_W2_S 0
#define HINF_CIS_CONF3_REG (DR_REG_HINF_BASE + 0x2C)
/* HINF_CIS_CONF_W3 : R/W ;bitpos:[31:0] ;default: 32'hffffffff ; */
/*description: */
#define HINF_CIS_CONF_W3 0xFFFFFFFF
#define HINF_CIS_CONF_W3_M ((HINF_CIS_CONF_W3_V)<<(HINF_CIS_CONF_W3_S))
#define HINF_CIS_CONF_W3_V 0xFFFFFFFF
#define HINF_CIS_CONF_W3_S 0
#define HINF_CIS_CONF4_REG (DR_REG_HINF_BASE + 0x30)
/* HINF_CIS_CONF_W4 : R/W ;bitpos:[31:0] ;default: 32'hffffffff ; */
/*description: */
#define HINF_CIS_CONF_W4 0xFFFFFFFF
#define HINF_CIS_CONF_W4_M ((HINF_CIS_CONF_W4_V)<<(HINF_CIS_CONF_W4_S))
#define HINF_CIS_CONF_W4_V 0xFFFFFFFF
#define HINF_CIS_CONF_W4_S 0
#define HINF_CIS_CONF5_REG (DR_REG_HINF_BASE + 0x34)
/* HINF_CIS_CONF_W5 : R/W ;bitpos:[31:0] ;default: 32'hffffffff ; */
/*description: */
#define HINF_CIS_CONF_W5 0xFFFFFFFF
#define HINF_CIS_CONF_W5_M ((HINF_CIS_CONF_W5_V)<<(HINF_CIS_CONF_W5_S))
#define HINF_CIS_CONF_W5_V 0xFFFFFFFF
#define HINF_CIS_CONF_W5_S 0
#define HINF_CIS_CONF6_REG (DR_REG_HINF_BASE + 0x38)
/* HINF_CIS_CONF_W6 : R/W ;bitpos:[31:0] ;default: 32'hffffffff ; */
/*description: */
#define HINF_CIS_CONF_W6 0xFFFFFFFF
#define HINF_CIS_CONF_W6_M ((HINF_CIS_CONF_W6_V)<<(HINF_CIS_CONF_W6_S))
#define HINF_CIS_CONF_W6_V 0xFFFFFFFF
#define HINF_CIS_CONF_W6_S 0
#define HINF_CIS_CONF7_REG (DR_REG_HINF_BASE + 0x3C)
/* HINF_CIS_CONF_W7 : R/W ;bitpos:[31:0] ;default: 32'hffffffff ; */
/*description: */
#define HINF_CIS_CONF_W7 0xFFFFFFFF
#define HINF_CIS_CONF_W7_M ((HINF_CIS_CONF_W7_V)<<(HINF_CIS_CONF_W7_S))
#define HINF_CIS_CONF_W7_V 0xFFFFFFFF
#define HINF_CIS_CONF_W7_S 0
#define HINF_CFG_DATA16_REG (DR_REG_HINF_BASE + 0x40)
/* HINF_DEVICE_ID_FN2 : R/W ;bitpos:[31:16] ;default: 16'h3333 ; */
/*description: */
#define HINF_DEVICE_ID_FN2 0x0000FFFF
#define HINF_DEVICE_ID_FN2_M ((HINF_DEVICE_ID_FN2_V)<<(HINF_DEVICE_ID_FN2_S))
#define HINF_DEVICE_ID_FN2_V 0xFFFF
#define HINF_DEVICE_ID_FN2_S 16
/* HINF_USER_ID_FN2 : R/W ;bitpos:[15:0] ;default: 16'h6666 ; */
/*description: */
#define HINF_USER_ID_FN2 0x0000FFFF
#define HINF_USER_ID_FN2_M ((HINF_USER_ID_FN2_V)<<(HINF_USER_ID_FN2_S))
#define HINF_USER_ID_FN2_V 0xFFFF
#define HINF_USER_ID_FN2_S 0
#define HINF_DATE_REG (DR_REG_HINF_BASE + 0xFC)
/* HINF_SDIO_DATE : R/W ;bitpos:[31:0] ;default: 32'h15030200 ; */
/*description: */
#define HINF_SDIO_DATE 0xFFFFFFFF
#define HINF_SDIO_DATE_M ((HINF_SDIO_DATE_V)<<(HINF_SDIO_DATE_S))
#define HINF_SDIO_DATE_V 0xFFFFFFFF
#define HINF_SDIO_DATE_S 0
#endif /*_SOC_HINF_REG_H_ */

136
tools/sdk/esp32/include/soc/soc/esp32/include/soc/hinf_struct.h Normal file
View File

@ -0,0 +1,136 @@
// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_HINF_STRUCT_H_
#define _SOC_HINF_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct hinf_dev_s {
union {
struct {
uint32_t user_id_fn1: 16;
uint32_t device_id_fn1:16;
};
uint32_t val;
} cfg_data0;
union {
struct {
uint32_t sdio_enable: 1;
uint32_t sdio_ioready1: 1;
uint32_t highspeed_enable: 1;
uint32_t highspeed_mode: 1;
uint32_t sdio_cd_enable: 1;
uint32_t sdio_ioready2: 1;
uint32_t sdio_int_mask: 1;
uint32_t ioenable2: 1;
uint32_t cd_disable: 1;
uint32_t func1_eps: 1;
uint32_t emp: 1;
uint32_t ioenable1: 1;
uint32_t sdio20_conf0: 4;
uint32_t sdio_ver: 12;
uint32_t func2_eps: 1;
uint32_t sdio20_conf1: 3;
};
uint32_t val;
} cfg_data1;
uint32_t reserved_8;
uint32_t reserved_c;
uint32_t reserved_10;
uint32_t reserved_14;
uint32_t reserved_18;
union {
struct {
uint32_t pin_state: 8;
uint32_t chip_state: 8;
uint32_t sdio_rst: 1;
uint32_t sdio_ioready0: 1;
uint32_t reserved18: 14;
};
uint32_t val;
} cfg_data7;
uint32_t cis_conf0; /**/
uint32_t cis_conf1; /**/
uint32_t cis_conf2; /**/
uint32_t cis_conf3; /**/
uint32_t cis_conf4; /**/
uint32_t cis_conf5; /**/
uint32_t cis_conf6; /**/
uint32_t cis_conf7; /**/
union {
struct {
uint32_t user_id_fn2: 16;
uint32_t device_id_fn2:16;
};
uint32_t val;
} cfg_data16;
uint32_t reserved_44;
uint32_t reserved_48;
uint32_t reserved_4c;
uint32_t reserved_50;
uint32_t reserved_54;
uint32_t reserved_58;
uint32_t reserved_5c;
uint32_t reserved_60;
uint32_t reserved_64;
uint32_t reserved_68;
uint32_t reserved_6c;
uint32_t reserved_70;
uint32_t reserved_74;
uint32_t reserved_78;
uint32_t reserved_7c;
uint32_t reserved_80;
uint32_t reserved_84;
uint32_t reserved_88;
uint32_t reserved_8c;
uint32_t reserved_90;
uint32_t reserved_94;
uint32_t reserved_98;
uint32_t reserved_9c;
uint32_t reserved_a0;
uint32_t reserved_a4;
uint32_t reserved_a8;
uint32_t reserved_ac;
uint32_t reserved_b0;
uint32_t reserved_b4;
uint32_t reserved_b8;
uint32_t reserved_bc;
uint32_t reserved_c0;
uint32_t reserved_c4;
uint32_t reserved_c8;
uint32_t reserved_cc;
uint32_t reserved_d0;
uint32_t reserved_d4;
uint32_t reserved_d8;
uint32_t reserved_dc;
uint32_t reserved_e0;
uint32_t reserved_e4;
uint32_t reserved_e8;
uint32_t reserved_ec;
uint32_t reserved_f0;
uint32_t reserved_f4;
uint32_t reserved_f8;
uint32_t date; /**/
} hinf_dev_t;
extern hinf_dev_t HINF;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_HINF_STRUCT_H_ */

3144
tools/sdk/esp32/include/soc/soc/esp32/include/soc/host_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

893
tools/sdk/esp32/include/soc/soc/esp32/include/soc/host_struct.h Normal file
View File

@ -0,0 +1,893 @@
// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_HOST_STRUCT_H_
#define _SOC_HOST_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct host_dev_s {
uint32_t reserved_0;
uint32_t reserved_4;
uint32_t reserved_8;
uint32_t reserved_c;
union {
struct {
uint32_t reserved0: 24;
uint32_t func2_int: 1;
uint32_t reserved25: 7;
};
uint32_t val;
} func2_0;
union {
struct {
uint32_t func2_int_en: 1;
uint32_t reserved1: 31;
};
uint32_t val;
} func2_1;
uint32_t reserved_18;
uint32_t reserved_1c;
union {
struct {
uint32_t func1_mdstat: 1;
uint32_t reserved1: 31;
};
uint32_t val;
} func2_2;
uint32_t reserved_24;
uint32_t reserved_28;
uint32_t reserved_2c;
uint32_t reserved_30;
uint32_t gpio_status0; /**/
union {
struct {
uint32_t sdio_int1: 8;
uint32_t reserved8: 24;
};
uint32_t val;
} gpio_status1;
uint32_t gpio_in0; /**/
union {
struct {
uint32_t sdio_in1: 8;
uint32_t reserved8: 24;
};
uint32_t val;
} gpio_in1;
union {
struct {
uint32_t token0: 12;
uint32_t rx_pf_valid: 1;
uint32_t reserved13: 3;
uint32_t reg_token1: 12;
uint32_t rx_pf_eof: 4;
};
uint32_t val;
} slc0_token_rdata;
uint32_t slc0_pf; /**/
uint32_t slc1_pf; /**/
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t gpio_sdio: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc0_int_raw;
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t wifi_rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t bt_rx_new_packet: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc1_int_raw;
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t gpio_sdio: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc0_int_st;
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t wifi_rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t bt_rx_new_packet: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc1_int_st;
union {
struct {
uint32_t reg_slc0_len: 20;
uint32_t reg_slc0_len_check:12;
};
uint32_t val;
} pkt_len;
union {
struct {
uint32_t state0: 8;
uint32_t state1: 8;
uint32_t state2: 8;
uint32_t state3: 8;
};
uint32_t val;
} state_w0;
union {
struct {
uint32_t state4: 8;
uint32_t state5: 8;
uint32_t state6: 8;
uint32_t state7: 8;
};
uint32_t val;
} state_w1;
union {
struct {
uint32_t conf0: 8;
uint32_t conf1: 8;
uint32_t conf2: 8;
uint32_t conf3: 8;
};
uint32_t val;
} conf_w0;
union {
struct {
uint32_t conf4: 8;
uint32_t conf5: 8;
uint32_t conf6: 8;
uint32_t conf7: 8;
};
uint32_t val;
} conf_w1;
union {
struct {
uint32_t conf8: 8;
uint32_t conf9: 8;
uint32_t conf10: 8;
uint32_t conf11: 8;
};
uint32_t val;
} conf_w2;
union {
struct {
uint32_t conf12: 8;
uint32_t conf13: 8;
uint32_t conf14: 8;
uint32_t conf15: 8;
};
uint32_t val;
} conf_w3;
union {
struct {
uint32_t conf16: 8; /*SLC timeout value*/
uint32_t conf17: 8; /*SLC timeout enable*/
uint32_t conf18: 8;
uint32_t conf19: 8; /*Interrupt to target CPU*/
};
uint32_t val;
} conf_w4;
union {
struct {
uint32_t conf20: 8;
uint32_t conf21: 8;
uint32_t conf22: 8;
uint32_t conf23: 8;
};
uint32_t val;
} conf_w5;
uint32_t win_cmd; /**/
union {
struct {
uint32_t conf24: 8;
uint32_t conf25: 8;
uint32_t conf26: 8;
uint32_t conf27: 8;
};
uint32_t val;
} conf_w6;
union {
struct {
uint32_t conf28: 8;
uint32_t conf29: 8;
uint32_t conf30: 8;
uint32_t conf31: 8;
};
uint32_t val;
} conf_w7;
union {
struct {
uint32_t reg_slc0_len0:20;
uint32_t reserved20: 12;
};
uint32_t val;
} pkt_len0;
union {
struct {
uint32_t reg_slc0_len1:20;
uint32_t reserved20: 12;
};
uint32_t val;
} pkt_len1;
union {
struct {
uint32_t reg_slc0_len2:20;
uint32_t reserved20: 12;
};
uint32_t val;
} pkt_len2;
union {
struct {
uint32_t conf32: 8;
uint32_t conf33: 8;
uint32_t conf34: 8;
uint32_t conf35: 8;
};
uint32_t val;
} conf_w8;
union {
struct {
uint32_t conf36: 8;
uint32_t conf37: 8;
uint32_t conf38: 8;
uint32_t conf39: 8;
};
uint32_t val;
} conf_w9;
union {
struct {
uint32_t conf40: 8;
uint32_t conf41: 8;
uint32_t conf42: 8;
uint32_t conf43: 8;
};
uint32_t val;
} conf_w10;
union {
struct {
uint32_t conf44: 8;
uint32_t conf45: 8;
uint32_t conf46: 8;
uint32_t conf47: 8;
};
uint32_t val;
} conf_w11;
union {
struct {
uint32_t conf48: 8;
uint32_t conf49: 8;
uint32_t conf50: 8;
uint32_t conf51: 8;
};
uint32_t val;
} conf_w12;
union {
struct {
uint32_t conf52: 8;
uint32_t conf53: 8;
uint32_t conf54: 8;
uint32_t conf55: 8;
};
uint32_t val;
} conf_w13;
union {
struct {
uint32_t conf56: 8;
uint32_t conf57: 8;
uint32_t conf58: 8;
uint32_t conf59: 8;
};
uint32_t val;
} conf_w14;
union {
struct {
uint32_t conf60: 8;
uint32_t conf61: 8;
uint32_t conf62: 8;
uint32_t conf63: 8;
};
uint32_t val;
} conf_w15;
uint32_t check_sum0; /**/
uint32_t check_sum1; /**/
union {
struct {
uint32_t token0: 12;
uint32_t rx_pf_valid: 1;
uint32_t reserved13: 3;
uint32_t reg_token1: 12;
uint32_t rx_pf_eof: 4;
};
uint32_t val;
} slc1_token_rdata;
union {
struct {
uint32_t token0_wd: 12;
uint32_t reserved12: 4;
uint32_t token1_wd: 12;
uint32_t reserved28: 4;
};
uint32_t val;
} slc0_token_wdata;
union {
struct {
uint32_t token0_wd: 12;
uint32_t reserved12: 4;
uint32_t token1_wd: 12;
uint32_t reserved28: 4;
};
uint32_t val;
} slc1_token_wdata;
union {
struct {
uint32_t slc0_token0_dec: 1;
uint32_t slc0_token1_dec: 1;
uint32_t slc0_token0_wr: 1;
uint32_t slc0_token1_wr: 1;
uint32_t slc1_token0_dec: 1;
uint32_t slc1_token1_dec: 1;
uint32_t slc1_token0_wr: 1;
uint32_t slc1_token1_wr: 1;
uint32_t slc0_len_wr: 1;
uint32_t reserved9: 23;
};
uint32_t val;
} token_con;
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t gpio_sdio: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc0_int_clr;
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t wifi_rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t bt_rx_new_packet: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc1_int_clr;
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t gpio_sdio: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc0_func1_int_ena;
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t wifi_rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t bt_rx_new_packet: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc1_func1_int_ena;
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t gpio_sdio: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc0_func2_int_ena;
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t wifi_rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t bt_rx_new_packet: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc1_func2_int_ena;
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t gpio_sdio: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc0_int_ena;
union {
struct {
uint32_t tohost_bit0: 1;
uint32_t tohost_bit1: 1;
uint32_t tohost_bit2: 1;
uint32_t tohost_bit3: 1;
uint32_t tohost_bit4: 1;
uint32_t tohost_bit5: 1;
uint32_t tohost_bit6: 1;
uint32_t tohost_bit7: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t token0_0to1: 1;
uint32_t token1_0to1: 1;
uint32_t rx_sof: 1;
uint32_t rx_eof: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t rx_pf_valid: 1;
uint32_t ext_bit0: 1;
uint32_t ext_bit1: 1;
uint32_t ext_bit2: 1;
uint32_t ext_bit3: 1;
uint32_t wifi_rx_new_packet: 1;
uint32_t rd_retry: 1;
uint32_t bt_rx_new_packet: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc1_int_ena;
union {
struct {
uint32_t infor: 20;
uint32_t reserved20: 12;
};
uint32_t val;
} slc0_rx_infor;
union {
struct {
uint32_t infor: 20;
uint32_t reserved20: 12;
};
uint32_t val;
} slc1_rx_infor;
uint32_t slc0_len_wd; /**/
uint32_t apbwin_wdata; /**/
union {
struct {
uint32_t addr: 28;
uint32_t wr: 1;
uint32_t start: 1;
uint32_t reserved30: 2;
};
uint32_t val;
} apbwin_conf;
uint32_t apbwin_rdata; /**/
union {
struct {
uint32_t bit7_clraddr: 9;
uint32_t bit6_clraddr: 9;
uint32_t reserved18: 14;
};
uint32_t val;
} slc0_rdclr;
union {
struct {
uint32_t bit7_clraddr: 9;
uint32_t bit6_clraddr: 9;
uint32_t reserved18: 14;
};
uint32_t val;
} slc1_rdclr;
union {
struct {
uint32_t tohost_bit01: 1;
uint32_t tohost_bit11: 1;
uint32_t tohost_bit21: 1;
uint32_t tohost_bit31: 1;
uint32_t tohost_bit41: 1;
uint32_t tohost_bit51: 1;
uint32_t tohost_bit61: 1;
uint32_t tohost_bit71: 1;
uint32_t token0_1to01: 1;
uint32_t token1_1to01: 1;
uint32_t token0_0to11: 1;
uint32_t token1_0to11: 1;
uint32_t rx_sof1: 1;
uint32_t rx_eof1: 1;
uint32_t rx_start1: 1;
uint32_t tx_start1: 1;
uint32_t rx_udf1: 1;
uint32_t tx_ovf1: 1;
uint32_t rx_pf_valid1: 1;
uint32_t ext_bit01: 1;
uint32_t ext_bit11: 1;
uint32_t ext_bit21: 1;
uint32_t ext_bit31: 1;
uint32_t rx_new_packet1: 1;
uint32_t rd_retry1: 1;
uint32_t gpio_sdio1: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc0_int_ena1;
union {
struct {
uint32_t tohost_bit01: 1;
uint32_t tohost_bit11: 1;
uint32_t tohost_bit21: 1;
uint32_t tohost_bit31: 1;
uint32_t tohost_bit41: 1;
uint32_t tohost_bit51: 1;
uint32_t tohost_bit61: 1;
uint32_t tohost_bit71: 1;
uint32_t token0_1to01: 1;
uint32_t token1_1to01: 1;
uint32_t token0_0to11: 1;
uint32_t token1_0to11: 1;
uint32_t rx_sof1: 1;
uint32_t rx_eof1: 1;
uint32_t rx_start1: 1;
uint32_t tx_start1: 1;
uint32_t rx_udf1: 1;
uint32_t tx_ovf1: 1;
uint32_t rx_pf_valid1: 1;
uint32_t ext_bit01: 1;
uint32_t ext_bit11: 1;
uint32_t ext_bit21: 1;
uint32_t ext_bit31: 1;
uint32_t wifi_rx_new_packet1: 1;
uint32_t rd_retry1: 1;
uint32_t bt_rx_new_packet1: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} slc1_int_ena1;
uint32_t reserved_11c;
uint32_t reserved_120;
uint32_t reserved_124;
uint32_t reserved_128;
uint32_t reserved_12c;
uint32_t reserved_130;
uint32_t reserved_134;
uint32_t reserved_138;
uint32_t reserved_13c;
uint32_t reserved_140;
uint32_t reserved_144;
uint32_t reserved_148;
uint32_t reserved_14c;
uint32_t reserved_150;
uint32_t reserved_154;
uint32_t reserved_158;
uint32_t reserved_15c;
uint32_t reserved_160;
uint32_t reserved_164;
uint32_t reserved_168;
uint32_t reserved_16c;
uint32_t reserved_170;
uint32_t reserved_174;
uint32_t date; /**/
uint32_t id; /**/
uint32_t reserved_180;
uint32_t reserved_184;
uint32_t reserved_188;
uint32_t reserved_18c;
uint32_t reserved_190;
uint32_t reserved_194;
uint32_t reserved_198;
uint32_t reserved_19c;
uint32_t reserved_1a0;
uint32_t reserved_1a4;
uint32_t reserved_1a8;
uint32_t reserved_1ac;
uint32_t reserved_1b0;
uint32_t reserved_1b4;
uint32_t reserved_1b8;
uint32_t reserved_1bc;
uint32_t reserved_1c0;
uint32_t reserved_1c4;
uint32_t reserved_1c8;
uint32_t reserved_1cc;
uint32_t reserved_1d0;
uint32_t reserved_1d4;
uint32_t reserved_1d8;
uint32_t reserved_1dc;
uint32_t reserved_1e0;
uint32_t reserved_1e4;
uint32_t reserved_1e8;
uint32_t reserved_1ec;
union {
struct {
uint32_t frc_sdio11: 5;
uint32_t frc_sdio20: 5;
uint32_t frc_neg_samp: 5;
uint32_t frc_pos_samp: 5;
uint32_t frc_quick_in: 5;
uint32_t sdio20_int_delay: 1;
uint32_t sdio_pad_pullup: 1;
uint32_t hspeed_con_en: 1;
uint32_t reserved28: 4;
};
uint32_t val;
} conf;
union {
struct {
uint32_t sdio20_mode: 5;
uint32_t sdio_neg_samp: 5;
uint32_t sdio_quick_in: 5;
uint32_t reserved15: 17;
};
uint32_t val;
} inf_st;
} host_dev_t;
extern host_dev_t HOST;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_HOST_STRUCT_H_ */

74
tools/sdk/esp32/include/soc/soc/esp32/include/soc/hwcrypto_reg.h Normal file
View File

@ -0,0 +1,74 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __HWCRYPTO_REG_H__
#define __HWCRYPTO_REG_H__
#include "soc.h"
/* registers for RSA acceleration via Multiple Precision Integer ops */
#define RSA_MEM_M_BLOCK_BASE ((DR_REG_RSA_BASE)+0x000)
/* RB & Z use the same memory block, depending on phase of operation */
#define RSA_MEM_RB_BLOCK_BASE ((DR_REG_RSA_BASE)+0x200)
#define RSA_MEM_Z_BLOCK_BASE ((DR_REG_RSA_BASE)+0x200)
#define RSA_MEM_Y_BLOCK_BASE ((DR_REG_RSA_BASE)+0x400)
#define RSA_MEM_X_BLOCK_BASE ((DR_REG_RSA_BASE)+0x600)
#define RSA_M_DASH_REG (DR_REG_RSA_BASE + 0x800)
#define RSA_MODEXP_MODE_REG (DR_REG_RSA_BASE + 0x804)
#define RSA_MODEXP_START_REG (DR_REG_RSA_BASE + 0x808)
#define RSA_MULT_MODE_REG (DR_REG_RSA_BASE + 0x80c)
#define RSA_MULT_START_REG (DR_REG_RSA_BASE + 0x810)
#define RSA_CLEAR_INTERRUPT_REG (DR_REG_RSA_BASE + 0x814)
#define RSA_QUERY_INTERRUPT_REG (DR_REG_RSA_BASE + 0x814) /* same */
#define RSA_QUERY_CLEAN_REG (DR_REG_RSA_BASE + 0x818)
/* Backwards compatibility register names used pre-ESP32S2 */
#define RSA_CLEAN_REG (RSA_QUERY_CLEAN_REG)
#define RSA_INTERRUPT_REG (RSA_CLEAR_INTERRUPT_REG)
#define RSA_START_MODEXP_REG (RSA_MODEXP_START_REG)
/* SHA acceleration registers */
#define SHA_TEXT_BASE ((DR_REG_SHA_BASE) + 0x00)
#define SHA_1_START_REG ((DR_REG_SHA_BASE) + 0x80)
#define SHA_1_CONTINUE_REG ((DR_REG_SHA_BASE) + 0x84)
#define SHA_1_LOAD_REG ((DR_REG_SHA_BASE) + 0x88)
#define SHA_1_BUSY_REG ((DR_REG_SHA_BASE) + 0x8c)
#define SHA_256_START_REG ((DR_REG_SHA_BASE) + 0x90)
#define SHA_256_CONTINUE_REG ((DR_REG_SHA_BASE) + 0x94)
#define SHA_256_LOAD_REG ((DR_REG_SHA_BASE) + 0x98)
#define SHA_256_BUSY_REG ((DR_REG_SHA_BASE) + 0x9c)
#define SHA_384_START_REG ((DR_REG_SHA_BASE) + 0xa0)
#define SHA_384_CONTINUE_REG ((DR_REG_SHA_BASE) + 0xa4)
#define SHA_384_LOAD_REG ((DR_REG_SHA_BASE) + 0xa8)
#define SHA_384_BUSY_REG ((DR_REG_SHA_BASE) + 0xac)
#define SHA_512_START_REG ((DR_REG_SHA_BASE) + 0xb0)
#define SHA_512_CONTINUE_REG ((DR_REG_SHA_BASE) + 0xb4)
#define SHA_512_LOAD_REG ((DR_REG_SHA_BASE) + 0xb8)
#define SHA_512_BUSY_REG ((DR_REG_SHA_BASE) + 0xbc)
/* AES acceleration registers */
#define AES_START_REG ((DR_REG_AES_BASE) + 0x00)
#define AES_IDLE_REG ((DR_REG_AES_BASE) + 0x04)
#define AES_MODE_REG ((DR_REG_AES_BASE) + 0x08)
#define AES_KEY_BASE ((DR_REG_AES_BASE) + 0x10)
#define AES_TEXT_BASE ((DR_REG_AES_BASE) + 0x30)
#define AES_ENDIAN ((DR_REG_AES_BASE) + 0x40)
#endif

36
tools/sdk/esp32/include/soc/soc/esp32/include/soc/i2c_caps.h Normal file
View File

@ -0,0 +1,36 @@
// Copyright 2010-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
// ESP32 have 2 I2C.
#define SOC_I2C_NUM (2)
#define SOC_I2C_FIFO_LEN (32) /*!< I2C hardware FIFO depth */
#define I2C_INTR_MASK (0x3fff) /*!< I2C all interrupt bitmap */
//ESP32 do not support hardware FSM reset
#define I2C_SUPPORT_HW_FSM_RST (0)
//ESP32 do not support hardware clear bus
#define I2C_SUPPORT_HW_CLR_BUS (0)
#ifdef __cplusplus
}
#endif

951
tools/sdk/esp32/include/soc/soc/esp32/include/soc/i2c_reg.h Normal file
View File

@ -0,0 +1,951 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_I2C_REG_H_
#define _SOC_I2C_REG_H_
#include "soc.h"
#define REG_I2C_BASE(i) (DR_REG_I2C_EXT_BASE + (i) * 0x14000 )
#define I2C_SCL_LOW_PERIOD_REG(i) (REG_I2C_BASE(i) + 0x0000)
/* I2C_SCL_LOW_PERIOD : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This register is used to configure the low level width of SCL clock.*/
#define I2C_SCL_LOW_PERIOD 0x00003FFF
#define I2C_SCL_LOW_PERIOD_M ((I2C_SCL_LOW_PERIOD_V)<<(I2C_SCL_LOW_PERIOD_S))
#define I2C_SCL_LOW_PERIOD_V 0x3FFF
#define I2C_SCL_LOW_PERIOD_S 0
#define I2C_CTR_REG(i) (REG_I2C_BASE(i) + 0x0004)
/* I2C_CLK_EN : R/W ;bitpos:[8] ;default: 1'b0 ; */
/*description: This is the clock gating control bit for reading or writing registers.*/
#define I2C_CLK_EN (BIT(8))
#define I2C_CLK_EN_M (BIT(8))
#define I2C_CLK_EN_V 0x1
#define I2C_CLK_EN_S 8
/* I2C_RX_LSB_FIRST : R/W ;bitpos:[7] ;default: 1'h0 ; */
/*description: This bit is used to control the storage mode for received datas.
1: receive data from most significant bit 0: receive data from least significant bit*/
#define I2C_RX_LSB_FIRST (BIT(7))
#define I2C_RX_LSB_FIRST_M (BIT(7))
#define I2C_RX_LSB_FIRST_V 0x1
#define I2C_RX_LSB_FIRST_S 7
/* I2C_TX_LSB_FIRST : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: This bit is used to control the sending mode for data need to
be send. 1: receive data from most significant bit 0: receive data from least significant bit*/
#define I2C_TX_LSB_FIRST (BIT(6))
#define I2C_TX_LSB_FIRST_M (BIT(6))
#define I2C_TX_LSB_FIRST_V 0x1
#define I2C_TX_LSB_FIRST_S 6
/* I2C_TRANS_START : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: Set this bit to start sending data in txfifo.*/
#define I2C_TRANS_START (BIT(5))
#define I2C_TRANS_START_M (BIT(5))
#define I2C_TRANS_START_V 0x1
#define I2C_TRANS_START_S 5
/* I2C_MS_MODE : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: Set this bit to configure the module as i2c master clear this
bit to configure the module as i2c slave.*/
#define I2C_MS_MODE (BIT(4))
#define I2C_MS_MODE_M (BIT(4))
#define I2C_MS_MODE_V 0x1
#define I2C_MS_MODE_S 4
/* I2C_SAMPLE_SCL_LEVEL : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: Set this bit to sample data in SCL low level. clear this bit
to sample data in SCL high level.*/
#define I2C_SAMPLE_SCL_LEVEL (BIT(2))
#define I2C_SAMPLE_SCL_LEVEL_M (BIT(2))
#define I2C_SAMPLE_SCL_LEVEL_V 0x1
#define I2C_SAMPLE_SCL_LEVEL_S 2
/* I2C_SCL_FORCE_OUT : R/W ;bitpos:[1] ;default: 1'b1 ; */
/*description: 1: normally ouput scl clock 0: exchange the function of scl_o
and scl_oe (scl_o is the original internal output scl signal scl_oe is the enable bit for the internal output scl signal)*/
#define I2C_SCL_FORCE_OUT (BIT(1))
#define I2C_SCL_FORCE_OUT_M (BIT(1))
#define I2C_SCL_FORCE_OUT_V 0x1
#define I2C_SCL_FORCE_OUT_S 1
/* I2C_SDA_FORCE_OUT : R/W ;bitpos:[0] ;default: 1'b1 ; */
/*description: 1: normally ouput sda data 0: exchange the function of sda_o
and sda_oe (sda_o is the original internal output sda signal sda_oe is the enable bit for the internal output sda signal)*/
#define I2C_SDA_FORCE_OUT (BIT(0))
#define I2C_SDA_FORCE_OUT_M (BIT(0))
#define I2C_SDA_FORCE_OUT_V 0x1
#define I2C_SDA_FORCE_OUT_S 0
#define I2C_SR_REG(i) (REG_I2C_BASE(i) + 0x0008)
/* I2C_SCL_STATE_LAST : RO ;bitpos:[30:28] ;default: 3'b0 ; */
/*description: This register stores the value of state machine to produce SCL.
3'h0: SCL_IDLE 3'h1:SCL_START 3'h2:SCL_LOW_EDGE 3'h3: SCL_LOW 3'h4:SCL_HIGH_EDGE 3'h5:SCL_HIGH 3'h6:SCL_STOP*/
#define I2C_SCL_STATE_LAST 0x00000007
#define I2C_SCL_STATE_LAST_M ((I2C_SCL_STATE_LAST_V)<<(I2C_SCL_STATE_LAST_S))
#define I2C_SCL_STATE_LAST_V 0x7
#define I2C_SCL_STATE_LAST_S 28
/* I2C_SCL_MAIN_STATE_LAST : RO ;bitpos:[26:24] ;default: 3'b0 ; */
/*description: This register stores the value of state machine for i2c module.
3'h0: SCL_MAIN_IDLE 3'h1: SCL_ADDRESS_SHIFT 3'h2: SCL_ACK_ADDRESS 3'h3: SCL_RX_DATA 3'h4 SCL_TX_DATA 3'h5:SCL_SEND_ACK 3'h6:SCL_WAIT_ACK*/
#define I2C_SCL_MAIN_STATE_LAST 0x00000007
#define I2C_SCL_MAIN_STATE_LAST_M ((I2C_SCL_MAIN_STATE_LAST_V)<<(I2C_SCL_MAIN_STATE_LAST_S))
#define I2C_SCL_MAIN_STATE_LAST_V 0x7
#define I2C_SCL_MAIN_STATE_LAST_S 24
/* I2C_TXFIFO_CNT : RO ;bitpos:[23:18] ;default: 6'b0 ; */
/*description: This register stores the amount of received data in ram.*/
#define I2C_TXFIFO_CNT 0x0000003F
#define I2C_TXFIFO_CNT_M ((I2C_TXFIFO_CNT_V)<<(I2C_TXFIFO_CNT_S))
#define I2C_TXFIFO_CNT_V 0x3F
#define I2C_TXFIFO_CNT_S 18
/* I2C_RXFIFO_CNT : RO ;bitpos:[13:8] ;default: 6'b0 ; */
/*description: This register represent the amount of data need to send.*/
#define I2C_RXFIFO_CNT 0x0000003F
#define I2C_RXFIFO_CNT_M ((I2C_RXFIFO_CNT_V)<<(I2C_RXFIFO_CNT_S))
#define I2C_RXFIFO_CNT_V 0x3F
#define I2C_RXFIFO_CNT_S 8
/* I2C_BYTE_TRANS : RO ;bitpos:[6] ;default: 1'b0 ; */
/*description: This register changes to high level when one byte is transferred.*/
#define I2C_BYTE_TRANS (BIT(6))
#define I2C_BYTE_TRANS_M (BIT(6))
#define I2C_BYTE_TRANS_V 0x1
#define I2C_BYTE_TRANS_S 6
/* I2C_SLAVE_ADDRESSED : RO ;bitpos:[5] ;default: 1'b0 ; */
/*description: when configured as i2c slave and the address send by master
is equal to slave's address then this bit will be high level.*/
#define I2C_SLAVE_ADDRESSED (BIT(5))
#define I2C_SLAVE_ADDRESSED_M (BIT(5))
#define I2C_SLAVE_ADDRESSED_V 0x1
#define I2C_SLAVE_ADDRESSED_S 5
/* I2C_BUS_BUSY : RO ;bitpos:[4] ;default: 1'b0 ; */
/*description: 1:I2C bus is busy transferring data. 0:I2C bus is in idle state.*/
#define I2C_BUS_BUSY (BIT(4))
#define I2C_BUS_BUSY_M (BIT(4))
#define I2C_BUS_BUSY_V 0x1
#define I2C_BUS_BUSY_S 4
/* I2C_ARB_LOST : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: when I2C lost control of SDA line this register changes to high level.*/
#define I2C_ARB_LOST (BIT(3))
#define I2C_ARB_LOST_M (BIT(3))
#define I2C_ARB_LOST_V 0x1
#define I2C_ARB_LOST_S 3
/* I2C_TIME_OUT : RO ;bitpos:[2] ;default: 1'b0 ; */
/*description: when I2C takes more than time_out_reg clocks to receive a data
then this register changes to high level.*/
#define I2C_TIME_OUT (BIT(2))
#define I2C_TIME_OUT_M (BIT(2))
#define I2C_TIME_OUT_V 0x1
#define I2C_TIME_OUT_S 2
/* I2C_SLAVE_RW : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: when in slave mode 1: master read slave 0: master write slave.*/
#define I2C_SLAVE_RW (BIT(1))
#define I2C_SLAVE_RW_M (BIT(1))
#define I2C_SLAVE_RW_V 0x1
#define I2C_SLAVE_RW_S 1
/* I2C_ACK_REC : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: This register stores the value of ACK bit.*/
#define I2C_ACK_REC (BIT(0))
#define I2C_ACK_REC_M (BIT(0))
#define I2C_ACK_REC_V 0x1
#define I2C_ACK_REC_S 0
#define I2C_TO_REG(i) (REG_I2C_BASE(i) + 0x000c)
/* I2C_TIME_OUT_REG : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: This register is used to configure the max clock number of receiving a data.*/
#define I2C_TIME_OUT_REG 0x000FFFFF
#define I2C_TIME_OUT_REG_M ((I2C_TIME_OUT_REG_V)<<(I2C_TIME_OUT_REG_S))
#define I2C_TIME_OUT_REG_V 0xFFFFF
#define I2C_TIME_OUT_REG_S 0
#define I2C_SLAVE_ADDR_REG(i) (REG_I2C_BASE(i) + 0x0010)
/* I2C_ADDR_10BIT_EN : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: This register is used to enable slave 10bit address mode.*/
#define I2C_ADDR_10BIT_EN (BIT(31))
#define I2C_ADDR_10BIT_EN_M (BIT(31))
#define I2C_ADDR_10BIT_EN_V 0x1
#define I2C_ADDR_10BIT_EN_S 31
/* I2C_SLAVE_ADDR : R/W ;bitpos:[14:0] ;default: 15'b0 ; */
/*description: when configured as i2c slave this register is used to configure
slave's address.*/
#define I2C_SLAVE_ADDR 0x00007FFF
#define I2C_SLAVE_ADDR_M ((I2C_SLAVE_ADDR_V)<<(I2C_SLAVE_ADDR_S))
#define I2C_SLAVE_ADDR_V 0x7FFF
#define I2C_SLAVE_ADDR_S 0
#define I2C_RXFIFO_ST_REG(i) (REG_I2C_BASE(i) + 0x0014)
/* I2C_TXFIFO_END_ADDR : RO ;bitpos:[19:15] ;default: 5'b0 ; */
/*description: This is the offset address of the last sending data as described
in nonfifo_tx_thres register.*/
#define I2C_TXFIFO_END_ADDR 0x0000001F
#define I2C_TXFIFO_END_ADDR_M ((I2C_TXFIFO_END_ADDR_V)<<(I2C_TXFIFO_END_ADDR_S))
#define I2C_TXFIFO_END_ADDR_V 0x1F
#define I2C_TXFIFO_END_ADDR_S 15
/* I2C_TXFIFO_START_ADDR : RO ;bitpos:[14:10] ;default: 5'b0 ; */
/*description: This is the offset address of the first sending data as described
in nonfifo_tx_thres register.*/
#define I2C_TXFIFO_START_ADDR 0x0000001F
#define I2C_TXFIFO_START_ADDR_M ((I2C_TXFIFO_START_ADDR_V)<<(I2C_TXFIFO_START_ADDR_S))
#define I2C_TXFIFO_START_ADDR_V 0x1F
#define I2C_TXFIFO_START_ADDR_S 10
/* I2C_RXFIFO_END_ADDR : RO ;bitpos:[9:5] ;default: 5'b0 ; */
/*description: This is the offset address of the first receiving data as described
in nonfifo_rx_thres_register.*/
#define I2C_RXFIFO_END_ADDR 0x0000001F
#define I2C_RXFIFO_END_ADDR_M ((I2C_RXFIFO_END_ADDR_V)<<(I2C_RXFIFO_END_ADDR_S))
#define I2C_RXFIFO_END_ADDR_V 0x1F
#define I2C_RXFIFO_END_ADDR_S 5
/* I2C_RXFIFO_START_ADDR : RO ;bitpos:[4:0] ;default: 5'b0 ; */
/*description: This is the offset address of the last receiving data as described
in nonfifo_rx_thres_register.*/
#define I2C_RXFIFO_START_ADDR 0x0000001F
#define I2C_RXFIFO_START_ADDR_M ((I2C_RXFIFO_START_ADDR_V)<<(I2C_RXFIFO_START_ADDR_S))
#define I2C_RXFIFO_START_ADDR_V 0x1F
#define I2C_RXFIFO_START_ADDR_S 0
#define I2C_FIFO_CONF_REG(i) (REG_I2C_BASE(i) + 0x0018)
/* I2C_NONFIFO_TX_THRES : R/W ;bitpos:[25:20] ;default: 6'h15 ; */
/*description: when I2C sends more than nonfifo_tx_thres data it will produce
tx_send_empty_int_raw interrupt and update the current offset address of the sending data.*/
#define I2C_NONFIFO_TX_THRES 0x0000003F
#define I2C_NONFIFO_TX_THRES_M ((I2C_NONFIFO_TX_THRES_V)<<(I2C_NONFIFO_TX_THRES_S))
#define I2C_NONFIFO_TX_THRES_V 0x3F
#define I2C_NONFIFO_TX_THRES_S 20
/* I2C_NONFIFO_RX_THRES : R/W ;bitpos:[19:14] ;default: 6'h15 ; */
/*description: when I2C receives more than nonfifo_rx_thres data it will produce
rx_send_full_int_raw interrupt and update the current offset address of the receiving data.*/
#define I2C_NONFIFO_RX_THRES 0x0000003F
#define I2C_NONFIFO_RX_THRES_M ((I2C_NONFIFO_RX_THRES_V)<<(I2C_NONFIFO_RX_THRES_S))
#define I2C_NONFIFO_RX_THRES_V 0x3F
#define I2C_NONFIFO_RX_THRES_S 14
/* I2C_TX_FIFO_RST : R/W ;bitpos:[13] ;default: 1'b0 ; */
/*description: Set this bit to reset tx fifo when using apb fifo access.*/
#define I2C_TX_FIFO_RST (BIT(13))
#define I2C_TX_FIFO_RST_M (BIT(13))
#define I2C_TX_FIFO_RST_V 0x1
#define I2C_TX_FIFO_RST_S 13
/* I2C_RX_FIFO_RST : R/W ;bitpos:[12] ;default: 1'b0 ; */
/*description: Set this bit to reset rx fifo when using apb fifo access.*/
#define I2C_RX_FIFO_RST (BIT(12))
#define I2C_RX_FIFO_RST_M (BIT(12))
#define I2C_RX_FIFO_RST_V 0x1
#define I2C_RX_FIFO_RST_S 12
/* I2C_FIFO_ADDR_CFG_EN : R/W ;bitpos:[11] ;default: 1'b0 ; */
/*description: When this bit is set to 1 then the byte after address represent
the offset address of I2C Slave's ram.*/
#define I2C_FIFO_ADDR_CFG_EN (BIT(11))
#define I2C_FIFO_ADDR_CFG_EN_M (BIT(11))
#define I2C_FIFO_ADDR_CFG_EN_V 0x1
#define I2C_FIFO_ADDR_CFG_EN_S 11
/* I2C_NONFIFO_EN : R/W ;bitpos:[10] ;default: 1'b0 ; */
/*description: Set this bit to enble apb nonfifo access.*/
#define I2C_NONFIFO_EN (BIT(10))
#define I2C_NONFIFO_EN_M (BIT(10))
#define I2C_NONFIFO_EN_V 0x1
#define I2C_NONFIFO_EN_S 10
/* I2C_TXFIFO_EMPTY_THRHD : R/W ;bitpos:[9:5] ;default: 5'h4 ; */
/*description: Config txfifo empty threhd value when using apb fifo access*/
#define I2C_TXFIFO_EMPTY_THRHD 0x0000001F
#define I2C_TXFIFO_EMPTY_THRHD_M ((I2C_TXFIFO_EMPTY_THRHD_V)<<(I2C_TXFIFO_EMPTY_THRHD_S))
#define I2C_TXFIFO_EMPTY_THRHD_V 0x1F
#define I2C_TXFIFO_EMPTY_THRHD_S 5
/* I2C_RXFIFO_FULL_THRHD : R/W ;bitpos:[4:0] ;default: 5'hb ; */
/*description: */
#define I2C_RXFIFO_FULL_THRHD 0x0000001F
#define I2C_RXFIFO_FULL_THRHD_M ((I2C_RXFIFO_FULL_THRHD_V)<<(I2C_RXFIFO_FULL_THRHD_S))
#define I2C_RXFIFO_FULL_THRHD_V 0x1F
#define I2C_RXFIFO_FULL_THRHD_S 0
#define I2C_DATA_APB_REG(i) (0x60013000 + (i) * 0x14000 + 0x001c)
#define I2C_DATA_REG(i) (REG_I2C_BASE(i) + 0x001c)
/* I2C_FIFO_RDATA : RO ;bitpos:[7:0] ;default: 8'b0 ; */
/*description: The register represent the byte data read from rxfifo when use apb fifo access*/
#define I2C_FIFO_RDATA 0x000000FF
#define I2C_FIFO_RDATA_M ((I2C_FIFO_RDATA_V)<<(I2C_FIFO_RDATA_S))
#define I2C_FIFO_RDATA_V 0xFF
#define I2C_FIFO_RDATA_S 0
#define I2C_INT_RAW_REG(i) (REG_I2C_BASE(i) + 0x0020)
/* I2C_TX_SEND_EMPTY_INT_RAW : RO ;bitpos:[12] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for tx_send_empty_int interrupt.when
I2C sends more data than nonfifo_tx_thres it will produce tx_send_empty_int interrupt..*/
#define I2C_TX_SEND_EMPTY_INT_RAW (BIT(12))
#define I2C_TX_SEND_EMPTY_INT_RAW_M (BIT(12))
#define I2C_TX_SEND_EMPTY_INT_RAW_V 0x1
#define I2C_TX_SEND_EMPTY_INT_RAW_S 12
/* I2C_RX_REC_FULL_INT_RAW : RO ;bitpos:[11] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for rx_rec_full_int interrupt. when
I2C receives more data than nonfifo_rx_thres it will produce rx_rec_full_int interrupt.*/
#define I2C_RX_REC_FULL_INT_RAW (BIT(11))
#define I2C_RX_REC_FULL_INT_RAW_M (BIT(11))
#define I2C_RX_REC_FULL_INT_RAW_V 0x1
#define I2C_RX_REC_FULL_INT_RAW_S 11
/* I2C_ACK_ERR_INT_RAW : RO ;bitpos:[10] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for ack_err_int interrupt. when
I2C receives a wrong ACK bit it will produce ack_err_int interrupt..*/
#define I2C_ACK_ERR_INT_RAW (BIT(10))
#define I2C_ACK_ERR_INT_RAW_M (BIT(10))
#define I2C_ACK_ERR_INT_RAW_V 0x1
#define I2C_ACK_ERR_INT_RAW_S 10
/* I2C_TRANS_START_INT_RAW : RO ;bitpos:[9] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for trans_start_int interrupt. when
I2C sends the START bit it will produce trans_start_int interrupt.*/
#define I2C_TRANS_START_INT_RAW (BIT(9))
#define I2C_TRANS_START_INT_RAW_M (BIT(9))
#define I2C_TRANS_START_INT_RAW_V 0x1
#define I2C_TRANS_START_INT_RAW_S 9
/* I2C_TIME_OUT_INT_RAW : RO ;bitpos:[8] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for time_out_int interrupt. when
I2C takes a lot of time to receive a data it will produce time_out_int interrupt.*/
#define I2C_TIME_OUT_INT_RAW (BIT(8))
#define I2C_TIME_OUT_INT_RAW_M (BIT(8))
#define I2C_TIME_OUT_INT_RAW_V 0x1
#define I2C_TIME_OUT_INT_RAW_S 8
/* I2C_TRANS_COMPLETE_INT_RAW : RO ;bitpos:[7] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for trans_complete_int interrupt.
when I2C Master finished STOP command it will produce trans_complete_int interrupt.*/
#define I2C_TRANS_COMPLETE_INT_RAW (BIT(7))
#define I2C_TRANS_COMPLETE_INT_RAW_M (BIT(7))
#define I2C_TRANS_COMPLETE_INT_RAW_V 0x1
#define I2C_TRANS_COMPLETE_INT_RAW_S 7
/* I2C_MASTER_TRAN_COMP_INT_RAW : RO ;bitpos:[6] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for master_tra_comp_int interrupt.
when I2C Master sends or receives a byte it will produce master_tran_comp_int interrupt.*/
#define I2C_MASTER_TRAN_COMP_INT_RAW (BIT(6))
#define I2C_MASTER_TRAN_COMP_INT_RAW_M (BIT(6))
#define I2C_MASTER_TRAN_COMP_INT_RAW_V 0x1
#define I2C_MASTER_TRAN_COMP_INT_RAW_S 6
/* I2C_ARBITRATION_LOST_INT_RAW : RO ;bitpos:[5] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for arbitration_lost_int interrupt.when
I2C lost the usage right of I2C BUS it will produce arbitration_lost_int interrupt.*/
#define I2C_ARBITRATION_LOST_INT_RAW (BIT(5))
#define I2C_ARBITRATION_LOST_INT_RAW_M (BIT(5))
#define I2C_ARBITRATION_LOST_INT_RAW_V 0x1
#define I2C_ARBITRATION_LOST_INT_RAW_S 5
/* I2C_SLAVE_TRAN_COMP_INT_RAW : RO ;bitpos:[4] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for slave_tran_comp_int interrupt.
when I2C Slave detectsthe STOP bit it will produce slave_tran_comp_int interrupt.*/
#define I2C_SLAVE_TRAN_COMP_INT_RAW (BIT(4))
#define I2C_SLAVE_TRAN_COMP_INT_RAW_M (BIT(4))
#define I2C_SLAVE_TRAN_COMP_INT_RAW_V 0x1
#define I2C_SLAVE_TRAN_COMP_INT_RAW_S 4
/* I2C_END_DETECT_INT_RAW : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for end_detect_int interrupt. when
I2C deals with the END command it will produce end_detect_int interrupt.*/
#define I2C_END_DETECT_INT_RAW (BIT(3))
#define I2C_END_DETECT_INT_RAW_M (BIT(3))
#define I2C_END_DETECT_INT_RAW_V 0x1
#define I2C_END_DETECT_INT_RAW_S 3
/* I2C_RXFIFO_OVF_INT_RAW : RO ;bitpos:[2] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for receiving data overflow when
use apb fifo access.*/
#define I2C_RXFIFO_OVF_INT_RAW (BIT(2))
#define I2C_RXFIFO_OVF_INT_RAW_M (BIT(2))
#define I2C_RXFIFO_OVF_INT_RAW_V 0x1
#define I2C_RXFIFO_OVF_INT_RAW_S 2
/* I2C_TXFIFO_EMPTY_INT_RAW : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for txfifo empty when use apb fifo access.*/
#define I2C_TXFIFO_EMPTY_INT_RAW (BIT(1))
#define I2C_TXFIFO_EMPTY_INT_RAW_M (BIT(1))
#define I2C_TXFIFO_EMPTY_INT_RAW_V 0x1
#define I2C_TXFIFO_EMPTY_INT_RAW_S 1
/* I2C_RXFIFO_FULL_INT_RAW : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: The raw interrupt status bit for rxfifo full when use apb fifo access.*/
#define I2C_RXFIFO_FULL_INT_RAW (BIT(0))
#define I2C_RXFIFO_FULL_INT_RAW_M (BIT(0))
#define I2C_RXFIFO_FULL_INT_RAW_V 0x1
#define I2C_RXFIFO_FULL_INT_RAW_S 0
#define I2C_INT_CLR_REG(i) (REG_I2C_BASE(i) + 0x0024)
/* I2C_TX_SEND_EMPTY_INT_CLR : WO ;bitpos:[12] ;default: 1'b0 ; */
/*description: Set this bit to clear the tx_send_empty_int interrupt.*/
#define I2C_TX_SEND_EMPTY_INT_CLR (BIT(12))
#define I2C_TX_SEND_EMPTY_INT_CLR_M (BIT(12))
#define I2C_TX_SEND_EMPTY_INT_CLR_V 0x1
#define I2C_TX_SEND_EMPTY_INT_CLR_S 12
/* I2C_RX_REC_FULL_INT_CLR : WO ;bitpos:[11] ;default: 1'b0 ; */
/*description: Set this bit to clear the rx_rec_full_int interrupt.*/
#define I2C_RX_REC_FULL_INT_CLR (BIT(11))
#define I2C_RX_REC_FULL_INT_CLR_M (BIT(11))
#define I2C_RX_REC_FULL_INT_CLR_V 0x1
#define I2C_RX_REC_FULL_INT_CLR_S 11
/* I2C_ACK_ERR_INT_CLR : WO ;bitpos:[10] ;default: 1'b0 ; */
/*description: Set this bit to clear the ack_err_int interrupt.*/
#define I2C_ACK_ERR_INT_CLR (BIT(10))
#define I2C_ACK_ERR_INT_CLR_M (BIT(10))
#define I2C_ACK_ERR_INT_CLR_V 0x1
#define I2C_ACK_ERR_INT_CLR_S 10
/* I2C_TRANS_START_INT_CLR : WO ;bitpos:[9] ;default: 1'b0 ; */
/*description: Set this bit to clear the trans_start_int interrupt.*/
#define I2C_TRANS_START_INT_CLR (BIT(9))
#define I2C_TRANS_START_INT_CLR_M (BIT(9))
#define I2C_TRANS_START_INT_CLR_V 0x1
#define I2C_TRANS_START_INT_CLR_S 9
/* I2C_TIME_OUT_INT_CLR : WO ;bitpos:[8] ;default: 1'b0 ; */
/*description: Set this bit to clear the time_out_int interrupt.*/
#define I2C_TIME_OUT_INT_CLR (BIT(8))
#define I2C_TIME_OUT_INT_CLR_M (BIT(8))
#define I2C_TIME_OUT_INT_CLR_V 0x1
#define I2C_TIME_OUT_INT_CLR_S 8
/* I2C_TRANS_COMPLETE_INT_CLR : WO ;bitpos:[7] ;default: 1'b0 ; */
/*description: Set this bit to clear the trans_complete_int interrupt.*/
#define I2C_TRANS_COMPLETE_INT_CLR (BIT(7))
#define I2C_TRANS_COMPLETE_INT_CLR_M (BIT(7))
#define I2C_TRANS_COMPLETE_INT_CLR_V 0x1
#define I2C_TRANS_COMPLETE_INT_CLR_S 7
/* I2C_MASTER_TRAN_COMP_INT_CLR : WO ;bitpos:[6] ;default: 1'b0 ; */
/*description: Set this bit to clear the master_tran_comp interrupt.*/
#define I2C_MASTER_TRAN_COMP_INT_CLR (BIT(6))
#define I2C_MASTER_TRAN_COMP_INT_CLR_M (BIT(6))
#define I2C_MASTER_TRAN_COMP_INT_CLR_V 0x1
#define I2C_MASTER_TRAN_COMP_INT_CLR_S 6
/* I2C_ARBITRATION_LOST_INT_CLR : WO ;bitpos:[5] ;default: 1'b0 ; */
/*description: Set this bit to clear the arbitration_lost_int interrupt.*/
#define I2C_ARBITRATION_LOST_INT_CLR (BIT(5))
#define I2C_ARBITRATION_LOST_INT_CLR_M (BIT(5))
#define I2C_ARBITRATION_LOST_INT_CLR_V 0x1
#define I2C_ARBITRATION_LOST_INT_CLR_S 5
/* I2C_SLAVE_TRAN_COMP_INT_CLR : WO ;bitpos:[4] ;default: 1'b0 ; */
/*description: Set this bit to clear the slave_tran_comp_int interrupt.*/
#define I2C_SLAVE_TRAN_COMP_INT_CLR (BIT(4))
#define I2C_SLAVE_TRAN_COMP_INT_CLR_M (BIT(4))
#define I2C_SLAVE_TRAN_COMP_INT_CLR_V 0x1
#define I2C_SLAVE_TRAN_COMP_INT_CLR_S 4
/* I2C_END_DETECT_INT_CLR : WO ;bitpos:[3] ;default: 1'b0 ; */
/*description: Set this bit to clear the end_detect_int interrupt.*/
#define I2C_END_DETECT_INT_CLR (BIT(3))
#define I2C_END_DETECT_INT_CLR_M (BIT(3))
#define I2C_END_DETECT_INT_CLR_V 0x1
#define I2C_END_DETECT_INT_CLR_S 3
/* I2C_RXFIFO_OVF_INT_CLR : WO ;bitpos:[2] ;default: 1'b0 ; */
/*description: Set this bit to clear the rxfifo_ovf_int interrupt.*/
#define I2C_RXFIFO_OVF_INT_CLR (BIT(2))
#define I2C_RXFIFO_OVF_INT_CLR_M (BIT(2))
#define I2C_RXFIFO_OVF_INT_CLR_V 0x1
#define I2C_RXFIFO_OVF_INT_CLR_S 2
/* I2C_TXFIFO_EMPTY_INT_CLR : WO ;bitpos:[1] ;default: 1'b0 ; */
/*description: Set this bit to clear the txfifo_empty_int interrupt.*/
#define I2C_TXFIFO_EMPTY_INT_CLR (BIT(1))
#define I2C_TXFIFO_EMPTY_INT_CLR_M (BIT(1))
#define I2C_TXFIFO_EMPTY_INT_CLR_V 0x1
#define I2C_TXFIFO_EMPTY_INT_CLR_S 1
/* I2C_RXFIFO_FULL_INT_CLR : WO ;bitpos:[0] ;default: 1'b0 ; */
/*description: Set this bit to clear the rxfifo_full_int interrupt.*/
#define I2C_RXFIFO_FULL_INT_CLR (BIT(0))
#define I2C_RXFIFO_FULL_INT_CLR_M (BIT(0))
#define I2C_RXFIFO_FULL_INT_CLR_V 0x1
#define I2C_RXFIFO_FULL_INT_CLR_S 0
#define I2C_INT_ENA_REG(i) (REG_I2C_BASE(i) + 0x0028)
/* I2C_TX_SEND_EMPTY_INT_ENA : R/W ;bitpos:[12] ;default: 1'b0 ; */
/*description: The enable bit for tx_send_empty_int interrupt.*/
#define I2C_TX_SEND_EMPTY_INT_ENA (BIT(12))
#define I2C_TX_SEND_EMPTY_INT_ENA_M (BIT(12))
#define I2C_TX_SEND_EMPTY_INT_ENA_V 0x1
#define I2C_TX_SEND_EMPTY_INT_ENA_S 12
/* I2C_RX_REC_FULL_INT_ENA : R/W ;bitpos:[11] ;default: 1'b0 ; */
/*description: The enable bit for rx_rec_full_int interrupt.*/
#define I2C_RX_REC_FULL_INT_ENA (BIT(11))
#define I2C_RX_REC_FULL_INT_ENA_M (BIT(11))
#define I2C_RX_REC_FULL_INT_ENA_V 0x1
#define I2C_RX_REC_FULL_INT_ENA_S 11
/* I2C_ACK_ERR_INT_ENA : R/W ;bitpos:[10] ;default: 1'b0 ; */
/*description: The enable bit for ack_err_int interrupt.*/
#define I2C_ACK_ERR_INT_ENA (BIT(10))
#define I2C_ACK_ERR_INT_ENA_M (BIT(10))
#define I2C_ACK_ERR_INT_ENA_V 0x1
#define I2C_ACK_ERR_INT_ENA_S 10
/* I2C_TRANS_START_INT_ENA : R/W ;bitpos:[9] ;default: 1'b0 ; */
/*description: The enable bit for trans_start_int interrupt.*/
#define I2C_TRANS_START_INT_ENA (BIT(9))
#define I2C_TRANS_START_INT_ENA_M (BIT(9))
#define I2C_TRANS_START_INT_ENA_V 0x1
#define I2C_TRANS_START_INT_ENA_S 9
/* I2C_TIME_OUT_INT_ENA : R/W ;bitpos:[8] ;default: 1'b0 ; */
/*description: The enable bit for time_out_int interrupt.*/
#define I2C_TIME_OUT_INT_ENA (BIT(8))
#define I2C_TIME_OUT_INT_ENA_M (BIT(8))
#define I2C_TIME_OUT_INT_ENA_V 0x1
#define I2C_TIME_OUT_INT_ENA_S 8
/* I2C_TRANS_COMPLETE_INT_ENA : R/W ;bitpos:[7] ;default: 1'b0 ; */
/*description: The enable bit for trans_complete_int interrupt.*/
#define I2C_TRANS_COMPLETE_INT_ENA (BIT(7))
#define I2C_TRANS_COMPLETE_INT_ENA_M (BIT(7))
#define I2C_TRANS_COMPLETE_INT_ENA_V 0x1
#define I2C_TRANS_COMPLETE_INT_ENA_S 7
/* I2C_MASTER_TRAN_COMP_INT_ENA : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: The enable bit for master_tran_comp_int interrupt.*/
#define I2C_MASTER_TRAN_COMP_INT_ENA (BIT(6))
#define I2C_MASTER_TRAN_COMP_INT_ENA_M (BIT(6))
#define I2C_MASTER_TRAN_COMP_INT_ENA_V 0x1
#define I2C_MASTER_TRAN_COMP_INT_ENA_S 6
/* I2C_ARBITRATION_LOST_INT_ENA : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: The enable bit for arbitration_lost_int interrupt.*/
#define I2C_ARBITRATION_LOST_INT_ENA (BIT(5))
#define I2C_ARBITRATION_LOST_INT_ENA_M (BIT(5))
#define I2C_ARBITRATION_LOST_INT_ENA_V 0x1
#define I2C_ARBITRATION_LOST_INT_ENA_S 5
/* I2C_SLAVE_TRAN_COMP_INT_ENA : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: The enable bit for slave_tran_comp_int interrupt.*/
#define I2C_SLAVE_TRAN_COMP_INT_ENA (BIT(4))
#define I2C_SLAVE_TRAN_COMP_INT_ENA_M (BIT(4))
#define I2C_SLAVE_TRAN_COMP_INT_ENA_V 0x1
#define I2C_SLAVE_TRAN_COMP_INT_ENA_S 4
/* I2C_END_DETECT_INT_ENA : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: The enable bit for end_detect_int interrupt.*/
#define I2C_END_DETECT_INT_ENA (BIT(3))
#define I2C_END_DETECT_INT_ENA_M (BIT(3))
#define I2C_END_DETECT_INT_ENA_V 0x1
#define I2C_END_DETECT_INT_ENA_S 3
/* I2C_RXFIFO_OVF_INT_ENA : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: The enable bit for rxfifo_ovf_int interrupt.*/
#define I2C_RXFIFO_OVF_INT_ENA (BIT(2))
#define I2C_RXFIFO_OVF_INT_ENA_M (BIT(2))
#define I2C_RXFIFO_OVF_INT_ENA_V 0x1
#define I2C_RXFIFO_OVF_INT_ENA_S 2
/* I2C_TXFIFO_EMPTY_INT_ENA : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: The enable bit for txfifo_empty_int interrupt.*/
#define I2C_TXFIFO_EMPTY_INT_ENA (BIT(1))
#define I2C_TXFIFO_EMPTY_INT_ENA_M (BIT(1))
#define I2C_TXFIFO_EMPTY_INT_ENA_V 0x1
#define I2C_TXFIFO_EMPTY_INT_ENA_S 1
/* I2C_RXFIFO_FULL_INT_ENA : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The enable bit for rxfifo_full_int interrupt.*/
#define I2C_RXFIFO_FULL_INT_ENA (BIT(0))
#define I2C_RXFIFO_FULL_INT_ENA_M (BIT(0))
#define I2C_RXFIFO_FULL_INT_ENA_V 0x1
#define I2C_RXFIFO_FULL_INT_ENA_S 0
#define I2C_INT_STATUS_REG(i) (REG_I2C_BASE(i) + 0x002c)
/* I2C_TX_SEND_EMPTY_INT_ST : RO ;bitpos:[12] ;default: 1'b0 ; */
/*description: The masked interrupt status for tx_send_empty_int interrupt.*/
#define I2C_TX_SEND_EMPTY_INT_ST (BIT(12))
#define I2C_TX_SEND_EMPTY_INT_ST_M (BIT(12))
#define I2C_TX_SEND_EMPTY_INT_ST_V 0x1
#define I2C_TX_SEND_EMPTY_INT_ST_S 12
/* I2C_RX_REC_FULL_INT_ST : RO ;bitpos:[11] ;default: 1'b0 ; */
/*description: The masked interrupt status for rx_rec_full_int interrupt.*/
#define I2C_RX_REC_FULL_INT_ST (BIT(11))
#define I2C_RX_REC_FULL_INT_ST_M (BIT(11))
#define I2C_RX_REC_FULL_INT_ST_V 0x1
#define I2C_RX_REC_FULL_INT_ST_S 11
/* I2C_ACK_ERR_INT_ST : RO ;bitpos:[10] ;default: 1'b0 ; */
/*description: The masked interrupt status for ack_err_int interrupt.*/
#define I2C_ACK_ERR_INT_ST (BIT(10))
#define I2C_ACK_ERR_INT_ST_M (BIT(10))
#define I2C_ACK_ERR_INT_ST_V 0x1
#define I2C_ACK_ERR_INT_ST_S 10
/* I2C_TRANS_START_INT_ST : RO ;bitpos:[9] ;default: 1'b0 ; */
/*description: The masked interrupt status for trans_start_int interrupt.*/
#define I2C_TRANS_START_INT_ST (BIT(9))
#define I2C_TRANS_START_INT_ST_M (BIT(9))
#define I2C_TRANS_START_INT_ST_V 0x1
#define I2C_TRANS_START_INT_ST_S 9
/* I2C_TIME_OUT_INT_ST : RO ;bitpos:[8] ;default: 1'b0 ; */
/*description: The masked interrupt status for time_out_int interrupt.*/
#define I2C_TIME_OUT_INT_ST (BIT(8))
#define I2C_TIME_OUT_INT_ST_M (BIT(8))
#define I2C_TIME_OUT_INT_ST_V 0x1
#define I2C_TIME_OUT_INT_ST_S 8
/* I2C_TRANS_COMPLETE_INT_ST : RO ;bitpos:[7] ;default: 1'b0 ; */
/*description: The masked interrupt status for trans_complete_int interrupt.*/
#define I2C_TRANS_COMPLETE_INT_ST (BIT(7))
#define I2C_TRANS_COMPLETE_INT_ST_M (BIT(7))
#define I2C_TRANS_COMPLETE_INT_ST_V 0x1
#define I2C_TRANS_COMPLETE_INT_ST_S 7
/* I2C_MASTER_TRAN_COMP_INT_ST : RO ;bitpos:[6] ;default: 1'b0 ; */
/*description: The masked interrupt status for master_tran_comp_int interrupt.*/
#define I2C_MASTER_TRAN_COMP_INT_ST (BIT(6))
#define I2C_MASTER_TRAN_COMP_INT_ST_M (BIT(6))
#define I2C_MASTER_TRAN_COMP_INT_ST_V 0x1
#define I2C_MASTER_TRAN_COMP_INT_ST_S 6
/* I2C_ARBITRATION_LOST_INT_ST : RO ;bitpos:[5] ;default: 1'b0 ; */
/*description: The masked interrupt status for arbitration_lost_int interrupt.*/
#define I2C_ARBITRATION_LOST_INT_ST (BIT(5))
#define I2C_ARBITRATION_LOST_INT_ST_M (BIT(5))
#define I2C_ARBITRATION_LOST_INT_ST_V 0x1
#define I2C_ARBITRATION_LOST_INT_ST_S 5
/* I2C_SLAVE_TRAN_COMP_INT_ST : RO ;bitpos:[4] ;default: 1'b0 ; */
/*description: The masked interrupt status for slave_tran_comp_int interrupt.*/
#define I2C_SLAVE_TRAN_COMP_INT_ST (BIT(4))
#define I2C_SLAVE_TRAN_COMP_INT_ST_M (BIT(4))
#define I2C_SLAVE_TRAN_COMP_INT_ST_V 0x1
#define I2C_SLAVE_TRAN_COMP_INT_ST_S 4
/* I2C_END_DETECT_INT_ST : RO ;bitpos:[3] ;default: 1'b0 ; */
/*description: The masked interrupt status for end_detect_int interrupt.*/
#define I2C_END_DETECT_INT_ST (BIT(3))
#define I2C_END_DETECT_INT_ST_M (BIT(3))
#define I2C_END_DETECT_INT_ST_V 0x1
#define I2C_END_DETECT_INT_ST_S 3
/* I2C_RXFIFO_OVF_INT_ST : RO ;bitpos:[2] ;default: 1'b0 ; */
/*description: The masked interrupt status for rxfifo_ovf_int interrupt.*/
#define I2C_RXFIFO_OVF_INT_ST (BIT(2))
#define I2C_RXFIFO_OVF_INT_ST_M (BIT(2))
#define I2C_RXFIFO_OVF_INT_ST_V 0x1
#define I2C_RXFIFO_OVF_INT_ST_S 2
/* I2C_TXFIFO_EMPTY_INT_ST : RO ;bitpos:[1] ;default: 1'b0 ; */
/*description: The masked interrupt status for txfifo_empty_int interrupt.*/
#define I2C_TXFIFO_EMPTY_INT_ST (BIT(1))
#define I2C_TXFIFO_EMPTY_INT_ST_M (BIT(1))
#define I2C_TXFIFO_EMPTY_INT_ST_V 0x1
#define I2C_TXFIFO_EMPTY_INT_ST_S 1
/* I2C_RXFIFO_FULL_INT_ST : RO ;bitpos:[0] ;default: 1'b0 ; */
/*description: The masked interrupt status for rxfifo_full_int interrupt.*/
#define I2C_RXFIFO_FULL_INT_ST (BIT(0))
#define I2C_RXFIFO_FULL_INT_ST_M (BIT(0))
#define I2C_RXFIFO_FULL_INT_ST_V 0x1
#define I2C_RXFIFO_FULL_INT_ST_S 0
#define I2C_SDA_HOLD_REG(i) (REG_I2C_BASE(i) + 0x0030)
/* I2C_SDA_HOLD_TIME : R/W ;bitpos:[9:0] ;default: 10'b0 ; */
/*description: This register is used to configure the clock num I2C used to
hold the data after the negedge of SCL.*/
#define I2C_SDA_HOLD_TIME 0x000003FF
#define I2C_SDA_HOLD_TIME_M ((I2C_SDA_HOLD_TIME_V)<<(I2C_SDA_HOLD_TIME_S))
#define I2C_SDA_HOLD_TIME_V 0x3FF
#define I2C_SDA_HOLD_TIME_S 0
#define I2C_SDA_SAMPLE_REG(i) (REG_I2C_BASE(i) + 0x0034)
/* I2C_SDA_SAMPLE_TIME : R/W ;bitpos:[9:0] ;default: 10'b0 ; */
/*description: This register is used to configure the clock num I2C used to
sample data on SDA after the posedge of SCL*/
#define I2C_SDA_SAMPLE_TIME 0x000003FF
#define I2C_SDA_SAMPLE_TIME_M ((I2C_SDA_SAMPLE_TIME_V)<<(I2C_SDA_SAMPLE_TIME_S))
#define I2C_SDA_SAMPLE_TIME_V 0x3FF
#define I2C_SDA_SAMPLE_TIME_S 0
#define I2C_SCL_HIGH_PERIOD_REG(i) (REG_I2C_BASE(i) + 0x0038)
/* I2C_SCL_HIGH_PERIOD : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This register is used to configure the clock num during SCL is low level.*/
#define I2C_SCL_HIGH_PERIOD 0x00003FFF
#define I2C_SCL_HIGH_PERIOD_M ((I2C_SCL_HIGH_PERIOD_V)<<(I2C_SCL_HIGH_PERIOD_S))
#define I2C_SCL_HIGH_PERIOD_V 0x3FFF
#define I2C_SCL_HIGH_PERIOD_S 0
#define I2C_SCL_START_HOLD_REG(i) (REG_I2C_BASE(i) + 0x0040)
/* I2C_SCL_START_HOLD_TIME : R/W ;bitpos:[9:0] ;default: 10'b1000 ; */
/*description: This register is used to configure the clock num between the
negedge of SDA and negedge of SCL for start mark.*/
#define I2C_SCL_START_HOLD_TIME 0x000003FF
#define I2C_SCL_START_HOLD_TIME_M ((I2C_SCL_START_HOLD_TIME_V)<<(I2C_SCL_START_HOLD_TIME_S))
#define I2C_SCL_START_HOLD_TIME_V 0x3FF
#define I2C_SCL_START_HOLD_TIME_S 0
#define I2C_SCL_RSTART_SETUP_REG(i) (REG_I2C_BASE(i) + 0x0044)
/* I2C_SCL_RSTART_SETUP_TIME : R/W ;bitpos:[9:0] ;default: 10'b1000 ; */
/*description: This register is used to configure the clock num between the
posedge of SCL and the negedge of SDA for restart mark.*/
#define I2C_SCL_RSTART_SETUP_TIME 0x000003FF
#define I2C_SCL_RSTART_SETUP_TIME_M ((I2C_SCL_RSTART_SETUP_TIME_V)<<(I2C_SCL_RSTART_SETUP_TIME_S))
#define I2C_SCL_RSTART_SETUP_TIME_V 0x3FF
#define I2C_SCL_RSTART_SETUP_TIME_S 0
#define I2C_SCL_STOP_HOLD_REG(i) (REG_I2C_BASE(i) + 0x0048)
/* I2C_SCL_STOP_HOLD_TIME : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This register is used to configure the clock num after the STOP bit's posedge.*/
#define I2C_SCL_STOP_HOLD_TIME 0x00003FFF
#define I2C_SCL_STOP_HOLD_TIME_M ((I2C_SCL_STOP_HOLD_TIME_V)<<(I2C_SCL_STOP_HOLD_TIME_S))
#define I2C_SCL_STOP_HOLD_TIME_V 0x3FFF
#define I2C_SCL_STOP_HOLD_TIME_S 0
#define I2C_SCL_STOP_SETUP_REG(i) (REG_I2C_BASE(i) + 0x004C)
/* I2C_SCL_STOP_SETUP_TIME : R/W ;bitpos:[9:0] ;default: 10'b0 ; */
/*description: This register is used to configure the clock num between the
posedge of SCL and the posedge of SDA.*/
#define I2C_SCL_STOP_SETUP_TIME 0x000003FF
#define I2C_SCL_STOP_SETUP_TIME_M ((I2C_SCL_STOP_SETUP_TIME_V)<<(I2C_SCL_STOP_SETUP_TIME_S))
#define I2C_SCL_STOP_SETUP_TIME_V 0x3FF
#define I2C_SCL_STOP_SETUP_TIME_S 0
#define I2C_SCL_FILTER_CFG_REG(i) (REG_I2C_BASE(i) + 0x0050)
/* I2C_SCL_FILTER_EN : R/W ;bitpos:[3] ;default: 1'b1 ; */
/*description: This is the filter enable bit for SCL.*/
#define I2C_SCL_FILTER_EN (BIT(3))
#define I2C_SCL_FILTER_EN_M (BIT(3))
#define I2C_SCL_FILTER_EN_V 0x1
#define I2C_SCL_FILTER_EN_S 3
/* I2C_SCL_FILTER_THRES : R/W ;bitpos:[2:0] ;default: 3'b0 ; */
/*description: When input SCL's pulse width is smaller than this register value
I2C ignores this pulse.*/
#define I2C_SCL_FILTER_THRES 0x00000007
#define I2C_SCL_FILTER_THRES_M ((I2C_SCL_FILTER_THRES_V)<<(I2C_SCL_FILTER_THRES_S))
#define I2C_SCL_FILTER_THRES_V 0x7
#define I2C_SCL_FILTER_THRES_S 0
#define I2C_SDA_FILTER_CFG_REG(i) (REG_I2C_BASE(i) + 0x0054)
/* I2C_SDA_FILTER_EN : R/W ;bitpos:[3] ;default: 1'b1 ; */
/*description: This is the filter enable bit for SDA.*/
#define I2C_SDA_FILTER_EN (BIT(3))
#define I2C_SDA_FILTER_EN_M (BIT(3))
#define I2C_SDA_FILTER_EN_V 0x1
#define I2C_SDA_FILTER_EN_S 3
/* I2C_SDA_FILTER_THRES : R/W ;bitpos:[2:0] ;default: 3'b0 ; */
/*description: When input SCL's pulse width is smaller than this register value
I2C ignores this pulse.*/
#define I2C_SDA_FILTER_THRES 0x00000007
#define I2C_SDA_FILTER_THRES_M ((I2C_SDA_FILTER_THRES_V)<<(I2C_SDA_FILTER_THRES_S))
#define I2C_SDA_FILTER_THRES_V 0x7
#define I2C_SDA_FILTER_THRES_S 0
#define I2C_COMD0_REG(i) (REG_I2C_BASE(i) + 0x0058)
/* I2C_COMMAND0_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command0 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND0_DONE (BIT(31))
#define I2C_COMMAND0_DONE_M (BIT(31))
#define I2C_COMMAND0_DONE_V 0x1
#define I2C_COMMAND0_DONE_S 31
/* I2C_COMMAND0 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command0. It consists of three part. op_code
is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND0 0x00003FFF
#define I2C_COMMAND0_M ((I2C_COMMAND0_V)<<(I2C_COMMAND0_S))
#define I2C_COMMAND0_V 0x3FFF
#define I2C_COMMAND0_S 0
#define I2C_COMD1_REG(i) (REG_I2C_BASE(i) + 0x005C)
/* I2C_COMMAND1_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command1 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND1_DONE (BIT(31))
#define I2C_COMMAND1_DONE_M (BIT(31))
#define I2C_COMMAND1_DONE_V 0x1
#define I2C_COMMAND1_DONE_S 31
/* I2C_COMMAND1 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command1. It consists of three part. op_code
is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND1 0x00003FFF
#define I2C_COMMAND1_M ((I2C_COMMAND1_V)<<(I2C_COMMAND1_S))
#define I2C_COMMAND1_V 0x3FFF
#define I2C_COMMAND1_S 0
#define I2C_COMD2_REG(i) (REG_I2C_BASE(i) + 0x0060)
/* I2C_COMMAND2_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command2 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND2_DONE (BIT(31))
#define I2C_COMMAND2_DONE_M (BIT(31))
#define I2C_COMMAND2_DONE_V 0x1
#define I2C_COMMAND2_DONE_S 31
/* I2C_COMMAND2 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command2. It consists of three part. op_code
is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND2 0x00003FFF
#define I2C_COMMAND2_M ((I2C_COMMAND2_V)<<(I2C_COMMAND2_S))
#define I2C_COMMAND2_V 0x3FFF
#define I2C_COMMAND2_S 0
#define I2C_COMD3_REG(i) (REG_I2C_BASE(i) + 0x0064)
/* I2C_COMMAND3_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command3 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND3_DONE (BIT(31))
#define I2C_COMMAND3_DONE_M (BIT(31))
#define I2C_COMMAND3_DONE_V 0x1
#define I2C_COMMAND3_DONE_S 31
/* I2C_COMMAND3 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command3. It consists of three part. op_code
is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND3 0x00003FFF
#define I2C_COMMAND3_M ((I2C_COMMAND3_V)<<(I2C_COMMAND3_S))
#define I2C_COMMAND3_V 0x3FFF
#define I2C_COMMAND3_S 0
#define I2C_COMD4_REG(i) (REG_I2C_BASE(i) + 0x0068)
/* I2C_COMMAND4_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command4 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND4_DONE (BIT(31))
#define I2C_COMMAND4_DONE_M (BIT(31))
#define I2C_COMMAND4_DONE_V 0x1
#define I2C_COMMAND4_DONE_S 31
/* I2C_COMMAND4 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command4. It consists of three part. op_code
is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND4 0x00003FFF
#define I2C_COMMAND4_M ((I2C_COMMAND4_V)<<(I2C_COMMAND4_S))
#define I2C_COMMAND4_V 0x3FFF
#define I2C_COMMAND4_S 0
#define I2C_COMD5_REG(i) (REG_I2C_BASE(i) + 0x006C)
/* I2C_COMMAND5_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command5 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND5_DONE (BIT(31))
#define I2C_COMMAND5_DONE_M (BIT(31))
#define I2C_COMMAND5_DONE_V 0x1
#define I2C_COMMAND5_DONE_S 31
/* I2C_COMMAND5 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command5. It consists of three part. op_code
is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND5 0x00003FFF
#define I2C_COMMAND5_M ((I2C_COMMAND5_V)<<(I2C_COMMAND5_S))
#define I2C_COMMAND5_V 0x3FFF
#define I2C_COMMAND5_S 0
#define I2C_COMD6_REG(i) (REG_I2C_BASE(i) + 0x0070)
/* I2C_COMMAND6_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command6 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND6_DONE (BIT(31))
#define I2C_COMMAND6_DONE_M (BIT(31))
#define I2C_COMMAND6_DONE_V 0x1
#define I2C_COMMAND6_DONE_S 31
/* I2C_COMMAND6 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command6. It consists of three part. op_code
is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND6 0x00003FFF
#define I2C_COMMAND6_M ((I2C_COMMAND6_V)<<(I2C_COMMAND6_S))
#define I2C_COMMAND6_V 0x3FFF
#define I2C_COMMAND6_S 0
#define I2C_COMD7_REG(i) (REG_I2C_BASE(i) + 0x0074)
/* I2C_COMMAND7_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command7 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND7_DONE (BIT(31))
#define I2C_COMMAND7_DONE_M (BIT(31))
#define I2C_COMMAND7_DONE_V 0x1
#define I2C_COMMAND7_DONE_S 31
/* I2C_COMMAND7 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command7. It consists of three part. op_code
is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND7 0x00003FFF
#define I2C_COMMAND7_M ((I2C_COMMAND7_V)<<(I2C_COMMAND7_S))
#define I2C_COMMAND7_V 0x3FFF
#define I2C_COMMAND7_S 0
#define I2C_COMD8_REG(i) (REG_I2C_BASE(i) + 0x0078)
/* I2C_COMMAND8_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command8 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND8_DONE (BIT(31))
#define I2C_COMMAND8_DONE_M (BIT(31))
#define I2C_COMMAND8_DONE_V 0x1
#define I2C_COMMAND8_DONE_S 31
/* I2C_COMMAND8 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command8. It consists of three part. op_code
is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND8 0x00003FFF
#define I2C_COMMAND8_M ((I2C_COMMAND8_V)<<(I2C_COMMAND8_S))
#define I2C_COMMAND8_V 0x3FFF
#define I2C_COMMAND8_S 0
#define I2C_COMD9_REG(i) (REG_I2C_BASE(i) + 0x007C)
/* I2C_COMMAND9_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command9 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND9_DONE (BIT(31))
#define I2C_COMMAND9_DONE_M (BIT(31))
#define I2C_COMMAND9_DONE_V 0x1
#define I2C_COMMAND9_DONE_S 31
/* I2C_COMMAND9 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command9. It consists of three part. op_code
is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND9 0x00003FFF
#define I2C_COMMAND9_M ((I2C_COMMAND9_V)<<(I2C_COMMAND9_S))
#define I2C_COMMAND9_V 0x3FFF
#define I2C_COMMAND9_S 0
#define I2C_COMD10_REG(i) (REG_I2C_BASE(i) + 0x0080)
/* I2C_COMMAND10_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command10 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND10_DONE (BIT(31))
#define I2C_COMMAND10_DONE_M (BIT(31))
#define I2C_COMMAND10_DONE_V 0x1
#define I2C_COMMAND10_DONE_S 31
/* I2C_COMMAND10 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command10. It consists of three part.
op_code is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND10 0x00003FFF
#define I2C_COMMAND10_M ((I2C_COMMAND10_V)<<(I2C_COMMAND10_S))
#define I2C_COMMAND10_V 0x3FFF
#define I2C_COMMAND10_S 0
#define I2C_COMD11_REG(i) (REG_I2C_BASE(i) + 0x0084)
/* I2C_COMMAND11_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command11 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND11_DONE (BIT(31))
#define I2C_COMMAND11_DONE_M (BIT(31))
#define I2C_COMMAND11_DONE_V 0x1
#define I2C_COMMAND11_DONE_S 31
/* I2C_COMMAND11 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command11. It consists of three part.
op_code is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND11 0x00003FFF
#define I2C_COMMAND11_M ((I2C_COMMAND11_V)<<(I2C_COMMAND11_S))
#define I2C_COMMAND11_V 0x3FFF
#define I2C_COMMAND11_S 0
#define I2C_COMD12_REG(i) (REG_I2C_BASE(i) + 0x0088)
/* I2C_COMMAND12_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command12 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND12_DONE (BIT(31))
#define I2C_COMMAND12_DONE_M (BIT(31))
#define I2C_COMMAND12_DONE_V 0x1
#define I2C_COMMAND12_DONE_S 31
/* I2C_COMMAND12 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command12. It consists of three part.
op_code is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND12 0x00003FFF
#define I2C_COMMAND12_M ((I2C_COMMAND12_V)<<(I2C_COMMAND12_S))
#define I2C_COMMAND12_V 0x3FFF
#define I2C_COMMAND12_S 0
#define I2C_COMD13_REG(i) (REG_I2C_BASE(i) + 0x008C)
/* I2C_COMMAND13_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command13 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND13_DONE (BIT(31))
#define I2C_COMMAND13_DONE_M (BIT(31))
#define I2C_COMMAND13_DONE_V 0x1
#define I2C_COMMAND13_DONE_S 31
/* I2C_COMMAND13 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command13. It consists of three part.
op_code is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND13 0x00003FFF
#define I2C_COMMAND13_M ((I2C_COMMAND13_V)<<(I2C_COMMAND13_S))
#define I2C_COMMAND13_V 0x3FFF
#define I2C_COMMAND13_S 0
#define I2C_COMD14_REG(i) (REG_I2C_BASE(i) + 0x0090)
/* I2C_COMMAND14_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command14 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND14_DONE (BIT(31))
#define I2C_COMMAND14_DONE_M (BIT(31))
#define I2C_COMMAND14_DONE_V 0x1
#define I2C_COMMAND14_DONE_S 31
/* I2C_COMMAND14 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command14. It consists of three part.
op_code is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND14 0x00003FFF
#define I2C_COMMAND14_M ((I2C_COMMAND14_V)<<(I2C_COMMAND14_S))
#define I2C_COMMAND14_V 0x3FFF
#define I2C_COMMAND14_S 0
#define I2C_COMD15_REG(i) (REG_I2C_BASE(i) + 0x0094)
/* I2C_COMMAND15_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: When command15 is done in I2C Master mode this bit changes to high level.*/
#define I2C_COMMAND15_DONE (BIT(31))
#define I2C_COMMAND15_DONE_M (BIT(31))
#define I2C_COMMAND15_DONE_V 0x1
#define I2C_COMMAND15_DONE_S 31
/* I2C_COMMAND15 : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: This is the content of command15. It consists of three part.
op_code is the command 0: RSTART 1: WRITE 2: READ 3: STOP . 4:END. Byte_num represent the number of data need to be send or data need to be received. ack_check_en ack_exp and ack value are used to control the ack bit.*/
#define I2C_COMMAND15 0x00003FFF
#define I2C_COMMAND15_M ((I2C_COMMAND15_V)<<(I2C_COMMAND15_S))
#define I2C_COMMAND15_V 0x3FFF
#define I2C_COMMAND15_S 0
#define I2C_DATE_REG(i) (REG_I2C_BASE(i) + 0x00F8)
/* I2C_DATE : R/W ;bitpos:[31:0] ;default: 32'h16042000 ; */
/*description: */
#define I2C_DATE 0xFFFFFFFF
#define I2C_DATE_M ((I2C_DATE_V)<<(I2C_DATE_S))
#define I2C_DATE_V 0xFFFFFFFF
#define I2C_DATE_S 0
#define I2C_FIFO_START_ADDR_REG(i) (REG_I2C_BASE(i) + 0x0100)
#endif /*_SOC_I2C_REG_H_ */

301
tools/sdk/esp32/include/soc/soc/esp32/include/soc/i2c_struct.h Normal file
View File

@ -0,0 +1,301 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_I2C_STRUCT_H_
#define _SOC_I2C_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct i2c_dev_s {
union {
struct {
uint32_t period:14; /*This register is used to configure the low level width of SCL clock.*/
uint32_t reserved14: 18;
};
uint32_t val;
} scl_low_period;
union {
struct {
uint32_t sda_force_out: 1; /*1：normally output sda data 0: exchange the function of sda_o and sda_oe (sda_o is the original internal output sda signal sda_oe is the enable bit for the internal output sda signal)*/
uint32_t scl_force_out: 1; /*1：normally output scl clock 0: exchange the function of scl_o and scl_oe (scl_o is the original internal output scl signal scl_oe is the enable bit for the internal output scl signal)*/
uint32_t sample_scl_level: 1; /*Set this bit to sample data in SCL low level. clear this bit to sample data in SCL high level.*/
uint32_t reserved3: 1;
uint32_t ms_mode: 1; /*Set this bit to configure the module as i2c master clear this bit to configure the module as i2c slave.*/
uint32_t trans_start: 1; /*Set this bit to start sending data in tx_fifo.*/
uint32_t tx_lsb_first: 1; /*This bit is used to control the sending mode for data need to be send. 1：receive data from most significant bit 0：receive data from least significant bit*/
uint32_t rx_lsb_first: 1; /*This bit is used to control the storage mode for received data. 1：receive data from most significant bit 0：receive data from least significant bit*/
uint32_t clk_en: 1; /*This is the clock gating control bit for reading or writing registers.*/
uint32_t reserved9: 23;
};
uint32_t val;
} ctr;
union {
struct {
uint32_t ack_rec: 1; /*This register stores the value of ACK bit.*/
uint32_t slave_rw: 1; /*when in slave mode 1：master read slave 0: master write slave.*/
uint32_t time_out: 1; /*when I2C takes more than time_out_reg clocks to receive a data then this register changes to high level.*/
uint32_t arb_lost: 1; /*when I2C lost control of SDA line this register changes to high level.*/
uint32_t bus_busy: 1; /*1:I2C bus is busy transferring data. 0:I2C bus is in idle state.*/
uint32_t slave_addressed: 1; /*when configured as i2c slave and the address send by master is equal to slave's address then this bit will be high level.*/
uint32_t byte_trans: 1; /*This register changes to high level when one byte is transferred.*/
uint32_t reserved7: 1;
uint32_t rx_fifo_cnt: 6; /*This register represent the amount of data need to send.*/
uint32_t reserved14: 4;
uint32_t tx_fifo_cnt: 6; /*This register stores the amount of received data in ram.*/
uint32_t scl_main_state_last: 3; /*This register stores the value of state machine for i2c module. 3'h0: SCL_MAIN_IDLE 3'h1: SCL_ADDRESS_SHIFT 3'h2: SCL_ACK_ADDRESS 3'h3: SCL_RX_DATA 3'h4 SCL_TX_DATA 3'h5:SCL_SEND_ACK 3'h6:SCL_WAIT_ACK*/
uint32_t reserved27: 1;
uint32_t scl_state_last: 3; /*This register stores the value of state machine to produce SCL. 3'h0: SCL_IDLE 3'h1:SCL_START 3'h2:SCL_LOW_EDGE 3'h3: SCL_LOW 3'h4:SCL_HIGH_EDGE 3'h5:SCL_HIGH 3'h6:SCL_STOP*/
uint32_t reserved31: 1;
};
uint32_t val;
} status_reg;
union {
struct {
uint32_t tout: 20; /*This register is used to configure the max clock number of receiving a data, unit: APB clock cycle.*/
uint32_t reserved20:12;
};
uint32_t val;
} timeout;
union {
struct {
uint32_t addr: 15; /*when configured as i2c slave this register is used to configure slave's address.*/
uint32_t reserved15: 16;
uint32_t en_10bit: 1; /*This register is used to enable slave 10bit address mode.*/
};
uint32_t val;
} slave_addr;
union {
struct {
uint32_t rx_fifo_start_addr: 5; /*This is the offset address of the last receiving data as described in nonfifo_rx_thres_register.*/
uint32_t rx_fifo_end_addr: 5; /*This is the offset address of the first receiving data as described in nonfifo_rx_thres_register.*/
uint32_t tx_fifo_start_addr: 5; /*This is the offset address of the first sending data as described in nonfifo_tx_thres register.*/
uint32_t tx_fifo_end_addr: 5; /*This is the offset address of the last sending data as described in nonfifo_tx_thres register.*/
uint32_t reserved20: 12;
};
uint32_t val;
} fifo_st;
union {
struct {
uint32_t rx_fifo_full_thrhd: 5;
uint32_t tx_fifo_empty_thrhd:5; /*Config tx_fifo empty threhd value when using apb fifo access*/
uint32_t nonfifo_en: 1; /*Set this bit to enble apb nonfifo access.*/
uint32_t fifo_addr_cfg_en: 1; /*When this bit is set to 1 then the byte after address represent the offset address of I2C Slave's ram.*/
uint32_t rx_fifo_rst: 1; /*Set this bit to reset rx fifo when using apb fifo access.*/
uint32_t tx_fifo_rst: 1; /*Set this bit to reset tx fifo when using apb fifo access.*/
uint32_t nonfifo_rx_thres: 6; /*when I2C receives more than nonfifo_rx_thres data it will produce rx_send_full_int_raw interrupt and update the current offset address of the receiving data.*/
uint32_t nonfifo_tx_thres: 6; /*when I2C sends more than nonfifo_tx_thres data it will produce tx_send_empty_int_raw interrupt and update the current offset address of the sending data.*/
uint32_t reserved26: 6;
};
uint32_t val;
} fifo_conf;
union {
struct {
uint8_t data; /*The register represent the byte data read from rx_fifo when use apb fifo access*/
uint8_t reserved[3];
};
uint32_t val;
} fifo_data;
union {
struct {
uint32_t rx_fifo_full: 1; /*The raw interrupt status bit for rx_fifo full when use apb fifo access.*/
uint32_t tx_fifo_empty: 1; /*The raw interrupt status bit for tx_fifo empty when use apb fifo access.*/
uint32_t rx_fifo_ovf: 1; /*The raw interrupt status bit for receiving data overflow when use apb fifo access.*/
uint32_t end_detect: 1; /*The raw interrupt status bit for end_detect_int interrupt. when I2C deals with the END command it will produce end_detect_int interrupt.*/
uint32_t slave_tran_comp: 1; /*The raw interrupt status bit for slave_tran_comp_int interrupt. when I2C Slave detects the STOP bit it will produce slave_tran_comp_int interrupt.*/
uint32_t arbitration_lost: 1; /*The raw interrupt status bit for arbitration_lost_int interrupt.when I2C lost the usage right of I2C BUS it will produce arbitration_lost_int interrupt.*/
uint32_t master_tran_comp: 1; /*The raw interrupt status bit for master_tra_comp_int interrupt. when I2C Master sends or receives a byte it will produce master_tran_comp_int interrupt.*/
uint32_t trans_complete: 1; /*The raw interrupt status bit for trans_complete_int interrupt. when I2C Master finished STOP command it will produce trans_complete_int interrupt.*/
uint32_t time_out: 1; /*The raw interrupt status bit for time_out_int interrupt. when I2C takes a lot of time to receive a data it will produce time_out_int interrupt.*/
uint32_t trans_start: 1; /*The raw interrupt status bit for trans_start_int interrupt. when I2C sends the START bit it will produce trans_start_int interrupt.*/
uint32_t ack_err: 1; /*The raw interrupt status bit for ack_err_int interrupt. when I2C receives a wrong ACK bit it will produce ack_err_int interrupt..*/
uint32_t rx_rec_full: 1; /*The raw interrupt status bit for rx_rec_full_int interrupt. when I2C receives more data than nonfifo_rx_thres it will produce rx_rec_full_int interrupt.*/
uint32_t tx_send_empty: 1; /*The raw interrupt status bit for tx_send_empty_int interrupt.when I2C sends more data than nonfifo_tx_thres it will produce tx_send_empty_int interrupt..*/
uint32_t reserved13: 19;
};
uint32_t val;
} int_raw;
union {
struct {
uint32_t rx_fifo_full: 1; /*Set this bit to clear the rx_fifo_full_int interrupt.*/
uint32_t tx_fifo_empty: 1; /*Set this bit to clear the tx_fifo_empty_int interrupt.*/
uint32_t rx_fifo_ovf: 1; /*Set this bit to clear the rx_fifo_ovf_int interrupt.*/
uint32_t end_detect: 1; /*Set this bit to clear the end_detect_int interrupt.*/
uint32_t slave_tran_comp: 1; /*Set this bit to clear the slave_tran_comp_int interrupt.*/
uint32_t arbitration_lost: 1; /*Set this bit to clear the arbitration_lost_int interrupt.*/
uint32_t master_tran_comp: 1; /*Set this bit to clear the master_tran_comp interrupt.*/
uint32_t trans_complete: 1; /*Set this bit to clear the trans_complete_int interrupt.*/
uint32_t time_out: 1; /*Set this bit to clear the time_out_int interrupt.*/
uint32_t trans_start: 1; /*Set this bit to clear the trans_start_int interrupt.*/
uint32_t ack_err: 1; /*Set this bit to clear the ack_err_int interrupt.*/
uint32_t rx_rec_full: 1; /*Set this bit to clear the rx_rec_full_int interrupt.*/
uint32_t tx_send_empty: 1; /*Set this bit to clear the tx_send_empty_int interrupt.*/
uint32_t reserved13: 19;
};
uint32_t val;
} int_clr;
union {
struct {
uint32_t rx_fifo_full: 1; /*The enable bit for rx_fifo_full_int interrupt.*/
uint32_t tx_fifo_empty: 1; /*The enable bit for tx_fifo_empty_int interrupt.*/
uint32_t rx_fifo_ovf: 1; /*The enable bit for rx_fifo_ovf_int interrupt.*/
uint32_t end_detect: 1; /*The enable bit for end_detect_int interrupt.*/
uint32_t slave_tran_comp: 1; /*The enable bit for slave_tran_comp_int interrupt.*/
uint32_t arbitration_lost: 1; /*The enable bit for arbitration_lost_int interrupt.*/
uint32_t master_tran_comp: 1; /*The enable bit for master_tran_comp_int interrupt.*/
uint32_t trans_complete: 1; /*The enable bit for trans_complete_int interrupt.*/
uint32_t time_out: 1; /*The enable bit for time_out_int interrupt.*/
uint32_t trans_start: 1; /*The enable bit for trans_start_int interrupt.*/
uint32_t ack_err: 1; /*The enable bit for ack_err_int interrupt.*/
uint32_t rx_rec_full: 1; /*The enable bit for rx_rec_full_int interrupt.*/
uint32_t tx_send_empty: 1; /*The enable bit for tx_send_empty_int interrupt.*/
uint32_t reserved13: 19;
};
uint32_t val;
} int_ena;
union {
struct {
uint32_t rx_fifo_full: 1; /*The masked interrupt status for rx_fifo_full_int interrupt.*/
uint32_t tx_fifo_empty: 1; /*The masked interrupt status for tx_fifo_empty_int interrupt.*/
uint32_t rx_fifo_ovf: 1; /*The masked interrupt status for rx_fifo_ovf_int interrupt.*/
uint32_t end_detect: 1; /*The masked interrupt status for end_detect_int interrupt.*/
uint32_t slave_tran_comp: 1; /*The masked interrupt status for slave_tran_comp_int interrupt.*/
uint32_t arbitration_lost: 1; /*The masked interrupt status for arbitration_lost_int interrupt.*/
uint32_t master_tran_comp: 1; /*The masked interrupt status for master_tran_comp_int interrupt.*/
uint32_t trans_complete: 1; /*The masked interrupt status for trans_complete_int interrupt.*/
uint32_t time_out: 1; /*The masked interrupt status for time_out_int interrupt.*/
uint32_t trans_start: 1; /*The masked interrupt status for trans_start_int interrupt.*/
uint32_t ack_err: 1; /*The masked interrupt status for ack_err_int interrupt.*/
uint32_t rx_rec_full: 1; /*The masked interrupt status for rx_rec_full_int interrupt.*/
uint32_t tx_send_empty: 1; /*The masked interrupt status for tx_send_empty_int interrupt.*/
uint32_t reserved13: 19;
};
uint32_t val;
} int_status;
union {
struct {
uint32_t time: 10; /*This register is used to configure the clock num I2C used to hold the data after the negedge of SCL.*/
uint32_t reserved10: 22;
};
uint32_t val;
} sda_hold;
union {
struct {
uint32_t time: 10; /*This register is used to configure the clock num I2C used to sample data on SDA after the posedge of SCL*/
uint32_t reserved10: 22;
};
uint32_t val;
} sda_sample;
union {
struct {
uint32_t period: 14; /*This register is used to configure the clock num during SCL is low level.*/
uint32_t reserved14: 18;
};
uint32_t val;
} scl_high_period;
uint32_t reserved_3c;
union {
struct {
uint32_t time: 10; /*This register is used to configure the clock num between the negedge of SDA and negedge of SCL for start mark.*/
uint32_t reserved10: 22;
};
uint32_t val;
} scl_start_hold;
union {
struct {
uint32_t time: 10; /*This register is used to configure the clock num between the posedge of SCL and the negedge of SDA for restart mark.*/
uint32_t reserved10: 22;
};
uint32_t val;
} scl_rstart_setup;
union {
struct {
uint32_t time: 14; /*This register is used to configure the clock num after the STOP bit's posedge.*/
uint32_t reserved14: 18;
};
uint32_t val;
} scl_stop_hold;
union {
struct {
uint32_t time: 10; /*This register is used to configure the clock num between the posedge of SCL and the posedge of SDA.*/
uint32_t reserved10: 22;
};
uint32_t val;
} scl_stop_setup;
union {
struct {
uint32_t thres: 3; /*When input SCL's pulse width is smaller than this register value I2C ignores this pulse.*/
uint32_t en: 1; /*This is the filter enable bit for SCL.*/
uint32_t reserved4: 28;
};
uint32_t val;
} scl_filter_cfg;
union {
struct {
uint32_t thres: 3; /*When input SCL's pulse width is smaller than this register value I2C ignores this pulse.*/
uint32_t en: 1; /*This is the filter enable bit for SDA.*/
uint32_t reserved4: 28;
};
uint32_t val;
} sda_filter_cfg;
union {
struct {
uint32_t byte_num: 8; /*Byte_num represent the number of data need to be send or data need to be received.*/
uint32_t ack_en: 1; /*ack_check_en ack_exp and ack value are used to control the ack bit.*/
uint32_t ack_exp: 1; /*ack_check_en ack_exp and ack value are used to control the ack bit.*/
uint32_t ack_val: 1; /*ack_check_en ack_exp and ack value are used to control the ack bit.*/
uint32_t op_code: 3; /*op_code is the command 0：RSTART 1：WRITE 2：READ 3：STOP . 4:END.*/
uint32_t reserved14: 17;
uint32_t done: 1; /*When command0 is done in I2C Master mode this bit changes to high level.*/
};
uint32_t val;
} command[16];
uint32_t reserved_98;
uint32_t reserved_9c;
uint32_t reserved_a0;
uint32_t reserved_a4;
uint32_t reserved_a8;
uint32_t reserved_ac;
uint32_t reserved_b0;
uint32_t reserved_b4;
uint32_t reserved_b8;
uint32_t reserved_bc;
uint32_t reserved_c0;
uint32_t reserved_c4;
uint32_t reserved_c8;
uint32_t reserved_cc;
uint32_t reserved_d0;
uint32_t reserved_d4;
uint32_t reserved_d8;
uint32_t reserved_dc;
uint32_t reserved_e0;
uint32_t reserved_e4;
uint32_t reserved_e8;
uint32_t reserved_ec;
uint32_t reserved_f0;
uint32_t reserved_f4;
uint32_t date; /**/
uint32_t reserved_fc;
uint32_t ram_data[32]; /*This the start address for ram when use apb nonfifo access.*/
} i2c_dev_t;
extern i2c_dev_t I2C0;
extern i2c_dev_t I2C1;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_I2C_STRUCT_H_ */

37
tools/sdk/esp32/include/soc/soc/esp32/include/soc/i2s_caps.h Normal file
View File

@ -0,0 +1,37 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#define APLL_MIN_FREQ (250000000)
#define APLL_MAX_FREQ (500000000)
#define APLL_I2S_MIN_RATE (10675) //in Hz, I2S Clock rate limited by hardware
#define I2S_AD_BCK_FACTOR (2)
#define I2S_PDM_BCK_FACTOR (64)
#define I2S_MAX_BUFFER_SIZE (4 * 1024 * 1024) //the maximum RAM can be allocated
#define I2S_BASE_CLK (2*APB_CLK_FREQ)
// ESP32 have 2 I2S
#define SOC_I2S_NUM (2)
#define SOC_I2S_SUPPORTS_PDM (1) // ESP32 support PDM
#define SOC_I2S_SUPPORTS_DMA_EQUAL (0) // ESP32 don't support dma equal
#define SOC_I2S_SUPPORTS_ADC_DAC (1) // ESP32 support ADC and DAC
#ifdef __cplusplus
}
#endif

1527
tools/sdk/esp32/include/soc/soc/esp32/include/soc/i2s_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

472
tools/sdk/esp32/include/soc/soc/esp32/include/soc/i2s_struct.h Normal file
View File

@ -0,0 +1,472 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_I2S_STRUCT_H_
#define _SOC_I2S_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct i2s_dev_s {
uint32_t reserved_0;
uint32_t reserved_4;
union {
struct {
uint32_t tx_reset: 1;
uint32_t rx_reset: 1;
uint32_t tx_fifo_reset: 1;
uint32_t rx_fifo_reset: 1;
uint32_t tx_start: 1;
uint32_t rx_start: 1;
uint32_t tx_slave_mod: 1;
uint32_t rx_slave_mod: 1;
uint32_t tx_right_first: 1;
uint32_t rx_right_first: 1;
uint32_t tx_msb_shift: 1;
uint32_t rx_msb_shift: 1;
uint32_t tx_short_sync: 1;
uint32_t rx_short_sync: 1;
uint32_t tx_mono: 1;
uint32_t rx_mono: 1;
uint32_t tx_msb_right: 1;
uint32_t rx_msb_right: 1;
uint32_t sig_loopback: 1;
uint32_t reserved19: 13;
};
uint32_t val;
} conf;
union {
struct {
uint32_t rx_take_data: 1;
uint32_t tx_put_data: 1;
uint32_t rx_wfull: 1;
uint32_t rx_rempty: 1;
uint32_t tx_wfull: 1;
uint32_t tx_rempty: 1;
uint32_t rx_hung: 1;
uint32_t tx_hung: 1;
uint32_t in_done: 1;
uint32_t in_suc_eof: 1;
uint32_t in_err_eof: 1;
uint32_t out_done: 1;
uint32_t out_eof: 1;
uint32_t in_dscr_err: 1;
uint32_t out_dscr_err: 1;
uint32_t in_dscr_empty: 1;
uint32_t out_total_eof: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} int_raw;
union {
struct {
uint32_t rx_take_data: 1;
uint32_t tx_put_data: 1;
uint32_t rx_wfull: 1;
uint32_t rx_rempty: 1;
uint32_t tx_wfull: 1;
uint32_t tx_rempty: 1;
uint32_t rx_hung: 1;
uint32_t tx_hung: 1;
uint32_t in_done: 1;
uint32_t in_suc_eof: 1;
uint32_t in_err_eof: 1;
uint32_t out_done: 1;
uint32_t out_eof: 1;
uint32_t in_dscr_err: 1;
uint32_t out_dscr_err: 1;
uint32_t in_dscr_empty: 1;
uint32_t out_total_eof: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} int_st;
union {
struct {
uint32_t rx_take_data: 1;
uint32_t tx_put_data: 1;
uint32_t rx_wfull: 1;
uint32_t rx_rempty: 1;
uint32_t tx_wfull: 1;
uint32_t tx_rempty: 1;
uint32_t rx_hung: 1;
uint32_t tx_hung: 1;
uint32_t in_done: 1;
uint32_t in_suc_eof: 1;
uint32_t in_err_eof: 1;
uint32_t out_done: 1;
uint32_t out_eof: 1;
uint32_t in_dscr_err: 1;
uint32_t out_dscr_err: 1;
uint32_t in_dscr_empty: 1;
uint32_t out_total_eof: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} int_ena;
union {
struct {
uint32_t take_data: 1;
uint32_t put_data: 1;
uint32_t rx_wfull: 1;
uint32_t rx_rempty: 1;
uint32_t tx_wfull: 1;
uint32_t tx_rempty: 1;
uint32_t rx_hung: 1;
uint32_t tx_hung: 1;
uint32_t in_done: 1;
uint32_t in_suc_eof: 1;
uint32_t in_err_eof: 1;
uint32_t out_done: 1;
uint32_t out_eof: 1;
uint32_t in_dscr_err: 1;
uint32_t out_dscr_err: 1;
uint32_t in_dscr_empty: 1;
uint32_t out_total_eof: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} int_clr;
union {
struct {
uint32_t tx_bck_in_delay: 2;
uint32_t tx_ws_in_delay: 2;
uint32_t rx_bck_in_delay: 2;
uint32_t rx_ws_in_delay: 2;
uint32_t rx_sd_in_delay: 2;
uint32_t tx_bck_out_delay: 2;
uint32_t tx_ws_out_delay: 2;
uint32_t tx_sd_out_delay: 2;
uint32_t rx_ws_out_delay: 2;
uint32_t rx_bck_out_delay: 2;
uint32_t tx_dsync_sw: 1;
uint32_t rx_dsync_sw: 1;
uint32_t data_enable_delay: 2;
uint32_t tx_bck_in_inv: 1;
uint32_t reserved25: 7;
};
uint32_t val;
} timing;
union {
struct {
uint32_t rx_data_num: 6;
uint32_t tx_data_num: 6;
uint32_t dscr_en: 1;
uint32_t tx_fifo_mod: 3;
uint32_t rx_fifo_mod: 3;
uint32_t tx_fifo_mod_force_en: 1;
uint32_t rx_fifo_mod_force_en: 1;
uint32_t reserved21: 11;
};
uint32_t val;
} fifo_conf;
uint32_t rx_eof_num;
uint32_t conf_single_data;
union {
struct {
uint32_t tx_chan_mod: 3;
uint32_t rx_chan_mod: 2;
uint32_t reserved5: 27;
};
uint32_t val;
} conf_chan;
union {
struct {
uint32_t addr: 20;
uint32_t reserved20: 8;
uint32_t stop: 1;
uint32_t start: 1;
uint32_t restart: 1;
uint32_t park: 1;
};
uint32_t val;
} out_link;
union {
struct {
uint32_t addr: 20;
uint32_t reserved20: 8;
uint32_t stop: 1;
uint32_t start: 1;
uint32_t restart: 1;
uint32_t park: 1;
};
uint32_t val;
} in_link;
uint32_t out_eof_des_addr;
uint32_t in_eof_des_addr;
uint32_t out_eof_bfr_des_addr;
union {
struct {
uint32_t mode: 3;
uint32_t reserved3: 1;
uint32_t addr: 2;
uint32_t reserved6: 26;
};
uint32_t val;
} ahb_test;
uint32_t in_link_dscr;
uint32_t in_link_dscr_bf0;
uint32_t in_link_dscr_bf1;
uint32_t out_link_dscr;
uint32_t out_link_dscr_bf0;
uint32_t out_link_dscr_bf1;
union {
struct {
uint32_t in_rst: 1;
uint32_t out_rst: 1;
uint32_t ahbm_fifo_rst: 1;
uint32_t ahbm_rst: 1;
uint32_t out_loop_test: 1;
uint32_t in_loop_test: 1;
uint32_t out_auto_wrback: 1;
uint32_t out_no_restart_clr: 1;
uint32_t out_eof_mode: 1;
uint32_t outdscr_burst_en: 1;
uint32_t indscr_burst_en: 1;
uint32_t out_data_burst_en: 1;
uint32_t check_owner: 1;
uint32_t mem_trans_en: 1;
uint32_t reserved14: 18;
};
uint32_t val;
} lc_conf;
union {
struct {
uint32_t wdata: 9;
uint32_t reserved9: 7;
uint32_t push: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} out_fifo_push;
union {
struct {
uint32_t rdata: 12;
uint32_t reserved12: 4;
uint32_t pop: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} in_fifo_pop;
uint32_t lc_state0;
uint32_t lc_state1;
union {
struct {
uint32_t fifo_timeout: 8;
uint32_t fifo_timeout_shift: 3;
uint32_t fifo_timeout_ena: 1;
uint32_t reserved12: 20;
};
uint32_t val;
} lc_hung_conf;
uint32_t reserved_78;
uint32_t reserved_7c;
union {
struct {
uint32_t y_max:16;
uint32_t y_min:16;
};
uint32_t val;
} cvsd_conf0;
union {
struct {
uint32_t sigma_max:16;
uint32_t sigma_min:16;
};
uint32_t val;
} cvsd_conf1;
union {
struct {
uint32_t cvsd_k: 3;
uint32_t cvsd_j: 3;
uint32_t cvsd_beta: 10;
uint32_t cvsd_h: 3;
uint32_t reserved19:13;
};
uint32_t val;
} cvsd_conf2;
union {
struct {
uint32_t good_pack_max: 6;
uint32_t n_err_seg: 3;
uint32_t shift_rate: 3;
uint32_t max_slide_sample: 8;
uint32_t pack_len_8k: 5;
uint32_t n_min_err: 3;
uint32_t reserved28: 4;
};
uint32_t val;
} plc_conf0;
union {
struct {
uint32_t bad_cef_atten_para: 8;
uint32_t bad_cef_atten_para_shift: 4;
uint32_t bad_ola_win2_para_shift: 4;
uint32_t bad_ola_win2_para: 8;
uint32_t slide_win_len: 8;
};
uint32_t val;
} plc_conf1;
union {
struct {
uint32_t cvsd_seg_mod: 2;
uint32_t min_period: 5;
uint32_t reserved7: 25;
};
uint32_t val;
} plc_conf2;
union {
struct {
uint32_t en: 1;
uint32_t chan_mod: 1;
uint32_t cvsd_dec_pack_err: 1;
uint32_t cvsd_pack_len_8k: 5;
uint32_t cvsd_inf_en: 1;
uint32_t cvsd_dec_start: 1;
uint32_t cvsd_dec_reset: 1;
uint32_t plc_en: 1;
uint32_t plc2dma_en: 1;
uint32_t reserved13: 19;
};
uint32_t val;
} esco_conf0;
union {
struct {
uint32_t with_en: 1;
uint32_t no_en: 1;
uint32_t cvsd_enc_start: 1;
uint32_t cvsd_enc_reset: 1;
uint32_t reserved4: 28;
};
uint32_t val;
} sco_conf0;
union {
struct {
uint32_t tx_pcm_conf: 3;
uint32_t tx_pcm_bypass: 1;
uint32_t rx_pcm_conf: 3;
uint32_t rx_pcm_bypass: 1;
uint32_t tx_stop_en: 1;
uint32_t tx_zeros_rm_en: 1;
uint32_t reserved10: 22;
};
uint32_t val;
} conf1;
union {
struct {
uint32_t fifo_force_pd: 1;
uint32_t fifo_force_pu: 1;
uint32_t plc_mem_force_pd: 1;
uint32_t plc_mem_force_pu: 1;
uint32_t reserved4: 28;
};
uint32_t val;
} pd_conf;
union {
struct {
uint32_t camera_en: 1;
uint32_t lcd_tx_wrx2_en: 1;
uint32_t lcd_tx_sdx2_en: 1;
uint32_t data_enable_test_en: 1;
uint32_t data_enable: 1;
uint32_t lcd_en: 1;
uint32_t ext_adc_start_en: 1;
uint32_t inter_valid_en: 1;
uint32_t reserved8: 24;
};
uint32_t val;
} conf2;
union {
struct {
uint32_t clkm_div_num: 8;
uint32_t clkm_div_b: 6;
uint32_t clkm_div_a: 6;
uint32_t clk_en: 1;
uint32_t clka_en: 1;
uint32_t reserved22: 10;
};
uint32_t val;
} clkm_conf;
union {
struct {
uint32_t tx_bck_div_num: 6;
uint32_t rx_bck_div_num: 6;
uint32_t tx_bits_mod: 6;
uint32_t rx_bits_mod: 6;
uint32_t reserved24: 8;
};
uint32_t val;
} sample_rate_conf;
union {
struct {
uint32_t tx_pdm_en: 1;
uint32_t rx_pdm_en: 1;
uint32_t pcm2pdm_conv_en: 1;
uint32_t pdm2pcm_conv_en: 1;
uint32_t tx_sinc_osr2: 4;
uint32_t tx_prescale: 8;
uint32_t tx_hp_in_shift: 2;
uint32_t tx_lp_in_shift: 2;
uint32_t tx_sinc_in_shift: 2;
uint32_t tx_sigmadelta_in_shift: 2;
uint32_t rx_sinc_dsr_16_en: 1;
uint32_t txhp_bypass: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} pdm_conf;
union {
struct {
uint32_t tx_pdm_fs: 10;
uint32_t tx_pdm_fp: 10;
uint32_t reserved20:12;
};
uint32_t val;
} pdm_freq_conf;
union {
struct {
uint32_t tx_idle: 1;
uint32_t tx_fifo_reset_back: 1;
uint32_t rx_fifo_reset_back: 1;
uint32_t reserved3: 29;
};
uint32_t val;
} state;
uint32_t reserved_c0;
uint32_t reserved_c4;
uint32_t reserved_c8;
uint32_t reserved_cc;
uint32_t reserved_d0;
uint32_t reserved_d4;
uint32_t reserved_d8;
uint32_t reserved_dc;
uint32_t reserved_e0;
uint32_t reserved_e4;
uint32_t reserved_e8;
uint32_t reserved_ec;
uint32_t reserved_f0;
uint32_t reserved_f4;
uint32_t reserved_f8;
uint32_t date; /**/
} i2s_dev_t;
extern i2s_dev_t I2S0;
extern i2s_dev_t I2S1;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_I2S_STRUCT_H_ */

355
tools/sdk/esp32/include/soc/soc/esp32/include/soc/io_mux_reg.h Normal file
View File

@ -0,0 +1,355 @@
// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_IO_MUX_REG_H_
#define _SOC_IO_MUX_REG_H_
#include "soc.h"
/* The following are the bit fields for PERIPHS_IO_MUX_x_U registers */
/* Output enable in sleep mode */
#define SLP_OE (BIT(0))
#define SLP_OE_M (BIT(0))
#define SLP_OE_V 1
#define SLP_OE_S 0
/* Pin used for wakeup from sleep */
#define SLP_SEL (BIT(1))
#define SLP_SEL_M (BIT(1))
#define SLP_SEL_V 1
#define SLP_SEL_S 1
/* Pulldown enable in sleep mode */
#define SLP_PD (BIT(2))
#define SLP_PD_M (BIT(2))
#define SLP_PD_V 1
#define SLP_PD_S 2
/* Pullup enable in sleep mode */
#define SLP_PU (BIT(3))
#define SLP_PU_M (BIT(3))
#define SLP_PU_V 1
#define SLP_PU_S 3
/* Input enable in sleep mode */
#define SLP_IE (BIT(4))
#define SLP_IE_M (BIT(4))
#define SLP_IE_V 1
#define SLP_IE_S 4
/* Drive strength in sleep mode */
#define SLP_DRV 0x3
#define SLP_DRV_M (SLP_DRV_V << SLP_DRV_S)
#define SLP_DRV_V 0x3
#define SLP_DRV_S 5
/* Pulldown enable */
#define FUN_PD (BIT(7))
#define FUN_PD_M (BIT(7))
#define FUN_PD_V 1
#define FUN_PD_S 7
/* Pullup enable */
#define FUN_PU (BIT(8))
#define FUN_PU_M (BIT(8))
#define FUN_PU_V 1
#define FUN_PU_S 8
/* Input enable */
#define FUN_IE (BIT(9))
#define FUN_IE_M (FUN_IE_V << FUN_IE_S)
#define FUN_IE_V 1
#define FUN_IE_S 9
/* Drive strength */
#define FUN_DRV 0x3
#define FUN_DRV_M (FUN_DRV_V << FUN_DRV_S)
#define FUN_DRV_V 0x3
#define FUN_DRV_S 10
/* Function select (possible values are defined for each pin as FUNC_pinname_function below) */
#define MCU_SEL 0x7
#define MCU_SEL_M (MCU_SEL_V << MCU_SEL_S)
#define MCU_SEL_V 0x7
#define MCU_SEL_S 12
#define PIN_INPUT_ENABLE(PIN_NAME) SET_PERI_REG_MASK(PIN_NAME,FUN_IE)
#define PIN_INPUT_DISABLE(PIN_NAME) CLEAR_PERI_REG_MASK(PIN_NAME,FUN_IE)
#define PIN_SET_DRV(PIN_NAME, drv) REG_SET_FIELD(PIN_NAME, FUN_DRV, (drv));
#define PIN_FUNC_SELECT(PIN_NAME, FUNC) REG_SET_FIELD(PIN_NAME, MCU_SEL, FUNC)
#define PIN_FUNC_GPIO 2
#define SPI_CLK_GPIO_NUM 6
#define SPI_CS0_GPIO_NUM 11
#define SPI_Q_GPIO_NUM 7
#define SPI_D_GPIO_NUM 8
#define SPI_WP_GPIO_NUM 10
#define SPI_HD_GPIO_NUM 9
#define PIN_CTRL (DR_REG_IO_MUX_BASE +0x00)
#define CLK_OUT3 0xf
#define CLK_OUT3_V CLK_OUT3
#define CLK_OUT3_S 8
#define CLK_OUT3_M (CLK_OUT3_V << CLK_OUT3_S)
#define CLK_OUT2 0xf
#define CLK_OUT2_V CLK_OUT2
#define CLK_OUT2_S 4
#define CLK_OUT2_M (CLK_OUT2_V << CLK_OUT2_S)
#define CLK_OUT1 0xf
#define CLK_OUT1_V CLK_OUT1
#define CLK_OUT1_S 0
#define CLK_OUT1_M (CLK_OUT1_V << CLK_OUT1_S)
#define PERIPHS_IO_MUX_GPIO0_U (DR_REG_IO_MUX_BASE +0x44)
#define IO_MUX_GPIO0_REG PERIPHS_IO_MUX_GPIO0_U
#define FUNC_GPIO0_EMAC_TX_CLK 5
#define FUNC_GPIO0_GPIO0 2
#define FUNC_GPIO0_CLK_OUT1 1
#define FUNC_GPIO0_GPIO0_0 0
#define PERIPHS_IO_MUX_U0TXD_U (DR_REG_IO_MUX_BASE +0x88)
#define IO_MUX_GPIO1_REG PERIPHS_IO_MUX_U0TXD_U
#define FUNC_U0TXD_EMAC_RXD2 5
#define FUNC_U0TXD_GPIO1 2
#define FUNC_U0TXD_CLK_OUT3 1
#define FUNC_U0TXD_U0TXD 0
#define PERIPHS_IO_MUX_GPIO2_U (DR_REG_IO_MUX_BASE +0x40)
#define IO_MUX_GPIO2_REG PERIPHS_IO_MUX_GPIO2_U
#define FUNC_GPIO2_SD_DATA0 4
#define FUNC_GPIO2_HS2_DATA0 3
#define FUNC_GPIO2_GPIO2 2
#define FUNC_GPIO2_HSPIWP 1
#define FUNC_GPIO2_GPIO2_0 0
#define PERIPHS_IO_MUX_U0RXD_U (DR_REG_IO_MUX_BASE +0x84)
#define IO_MUX_GPIO3_REG PERIPHS_IO_MUX_U0RXD_U
#define FUNC_U0RXD_GPIO3 2
#define FUNC_U0RXD_CLK_OUT2 1
#define FUNC_U0RXD_U0RXD 0
#define PERIPHS_IO_MUX_GPIO4_U (DR_REG_IO_MUX_BASE +0x48)
#define IO_MUX_GPIO4_REG PERIPHS_IO_MUX_GPIO4_U
#define FUNC_GPIO4_EMAC_TX_ER 5
#define FUNC_GPIO4_SD_DATA1 4
#define FUNC_GPIO4_HS2_DATA1 3
#define FUNC_GPIO4_GPIO4 2
#define FUNC_GPIO4_HSPIHD 1
#define FUNC_GPIO4_GPIO4_0 0
#define PERIPHS_IO_MUX_GPIO5_U (DR_REG_IO_MUX_BASE +0x6c)
#define IO_MUX_GPIO5_REG PERIPHS_IO_MUX_GPIO5_U
#define FUNC_GPIO5_EMAC_RX_CLK 5
#define FUNC_GPIO5_HS1_DATA6 3
#define FUNC_GPIO5_GPIO5 2
#define FUNC_GPIO5_VSPICS0 1
#define FUNC_GPIO5_GPIO5_0 0
#define PERIPHS_IO_MUX_SD_CLK_U (DR_REG_IO_MUX_BASE +0x60)
#define IO_MUX_GPIO6_REG PERIPHS_IO_MUX_SD_CLK_U
#define FUNC_SD_CLK_U1CTS 4
#define FUNC_SD_CLK_HS1_CLK 3
#define FUNC_SD_CLK_GPIO6 2
#define FUNC_SD_CLK_SPICLK 1
#define FUNC_SD_CLK_SD_CLK 0
#define PERIPHS_IO_MUX_SD_DATA0_U (DR_REG_IO_MUX_BASE +0x64)
#define IO_MUX_GPIO7_REG PERIPHS_IO_MUX_SD_DATA0_U
#define FUNC_SD_DATA0_U2RTS 4
#define FUNC_SD_DATA0_HS1_DATA0 3
#define FUNC_SD_DATA0_GPIO7 2
#define FUNC_SD_DATA0_SPIQ 1
#define FUNC_SD_DATA0_SD_DATA0 0
#define PERIPHS_IO_MUX_SD_DATA1_U (DR_REG_IO_MUX_BASE +0x68)
#define IO_MUX_GPIO8_REG PERIPHS_IO_MUX_SD_DATA1_U
#define FUNC_SD_DATA1_U2CTS 4
#define FUNC_SD_DATA1_HS1_DATA1 3
#define FUNC_SD_DATA1_GPIO8 2
#define FUNC_SD_DATA1_SPID 1
#define FUNC_SD_DATA1_SD_DATA1 0
#define PERIPHS_IO_MUX_SD_DATA2_U (DR_REG_IO_MUX_BASE +0x54)
#define IO_MUX_GPIO9_REG PERIPHS_IO_MUX_SD_DATA2_U
#define FUNC_SD_DATA2_U1RXD 4
#define FUNC_SD_DATA2_HS1_DATA2 3
#define FUNC_SD_DATA2_GPIO9 2
#define FUNC_SD_DATA2_SPIHD 1
#define FUNC_SD_DATA2_SD_DATA2 0
#define PERIPHS_IO_MUX_SD_DATA3_U (DR_REG_IO_MUX_BASE +0x58)
#define IO_MUX_GPIO10_REG PERIPHS_IO_MUX_SD_DATA3_U
#define FUNC_SD_DATA3_U1TXD 4
#define FUNC_SD_DATA3_HS1_DATA3 3
#define FUNC_SD_DATA3_GPIO10 2
#define FUNC_SD_DATA3_SPIWP 1
#define FUNC_SD_DATA3_SD_DATA3 0
#define PERIPHS_IO_MUX_SD_CMD_U (DR_REG_IO_MUX_BASE +0x5c)
#define IO_MUX_GPIO11_REG PERIPHS_IO_MUX_SD_CMD_U
#define FUNC_SD_CMD_U1RTS 4
#define FUNC_SD_CMD_HS1_CMD 3
#define FUNC_SD_CMD_GPIO11 2
#define FUNC_SD_CMD_SPICS0 1
#define FUNC_SD_CMD_SD_CMD 0
#define PERIPHS_IO_MUX_MTDI_U (DR_REG_IO_MUX_BASE +0x34)
#define IO_MUX_GPIO12_REG PERIPHS_IO_MUX_MTDI_U
#define FUNC_MTDI_EMAC_TXD3 5
#define FUNC_MTDI_SD_DATA2 4
#define FUNC_MTDI_HS2_DATA2 3
#define FUNC_MTDI_GPIO12 2
#define FUNC_MTDI_HSPIQ 1
#define FUNC_MTDI_MTDI 0
#define PERIPHS_IO_MUX_MTCK_U (DR_REG_IO_MUX_BASE +0x38)
#define IO_MUX_GPIO13_REG PERIPHS_IO_MUX_MTCK_U
#define FUNC_MTCK_EMAC_RX_ER 5
#define FUNC_MTCK_SD_DATA3 4
#define FUNC_MTCK_HS2_DATA3 3
#define FUNC_MTCK_GPIO13 2
#define FUNC_MTCK_HSPID 1
#define FUNC_MTCK_MTCK 0
#define PERIPHS_IO_MUX_MTMS_U (DR_REG_IO_MUX_BASE +0x30)
#define IO_MUX_GPIO14_REG PERIPHS_IO_MUX_MTMS_U
#define FUNC_MTMS_EMAC_TXD2 5
#define FUNC_MTMS_SD_CLK 4
#define FUNC_MTMS_HS2_CLK 3
#define FUNC_MTMS_GPIO14 2
#define FUNC_MTMS_HSPICLK 1
#define FUNC_MTMS_MTMS 0
#define PERIPHS_IO_MUX_MTDO_U (DR_REG_IO_MUX_BASE +0x3c)
#define IO_MUX_GPIO15_REG PERIPHS_IO_MUX_MTDO_U
#define FUNC_MTDO_EMAC_RXD3 5
#define FUNC_MTDO_SD_CMD 4
#define FUNC_MTDO_HS2_CMD 3
#define FUNC_MTDO_GPIO15 2
#define FUNC_MTDO_HSPICS0 1
#define FUNC_MTDO_MTDO 0
#define PERIPHS_IO_MUX_GPIO16_U (DR_REG_IO_MUX_BASE +0x4c)
#define IO_MUX_GPIO16_REG PERIPHS_IO_MUX_GPIO16_U
#define FUNC_GPIO16_EMAC_CLK_OUT 5
#define FUNC_GPIO16_U2RXD 4
#define FUNC_GPIO16_HS1_DATA4 3
#define FUNC_GPIO16_GPIO16 2
#define FUNC_GPIO16_GPIO16_0 0
#define PERIPHS_IO_MUX_GPIO17_U (DR_REG_IO_MUX_BASE +0x50)
#define IO_MUX_GPIO17_REG PERIPHS_IO_MUX_GPIO17_U
#define FUNC_GPIO17_EMAC_CLK_OUT_180 5
#define FUNC_GPIO17_U2TXD 4
#define FUNC_GPIO17_HS1_DATA5 3
#define FUNC_GPIO17_GPIO17 2
#define FUNC_GPIO17_GPIO17_0 0
#define PERIPHS_IO_MUX_GPIO18_U (DR_REG_IO_MUX_BASE +0x70)
#define IO_MUX_GPIO18_REG PERIPHS_IO_MUX_GPIO18_U
#define FUNC_GPIO18_HS1_DATA7 3
#define FUNC_GPIO18_GPIO18 2
#define FUNC_GPIO18_VSPICLK 1
#define FUNC_GPIO18_GPIO18_0 0
#define PERIPHS_IO_MUX_GPIO19_U (DR_REG_IO_MUX_BASE +0x74)
#define IO_MUX_GPIO19_REG PERIPHS_IO_MUX_GPIO19_U
#define FUNC_GPIO19_EMAC_TXD0 5
#define FUNC_GPIO19_U0CTS 3
#define FUNC_GPIO19_GPIO19 2
#define FUNC_GPIO19_VSPIQ 1
#define FUNC_GPIO19_GPIO19_0 0
#define PERIPHS_IO_MUX_GPIO20_U (DR_REG_IO_MUX_BASE +0x78)
#define IO_MUX_GPIO20_REG PERIPHS_IO_MUX_GPIO20_U
#define FUNC_GPIO20_GPIO20 2
#define FUNC_GPIO20_GPIO20_0 0
#define PERIPHS_IO_MUX_GPIO21_U (DR_REG_IO_MUX_BASE +0x7c)
#define IO_MUX_GPIO21_REG PERIPHS_IO_MUX_GPIO21_U
#define FUNC_GPIO21_EMAC_TX_EN 5
#define FUNC_GPIO21_GPIO21 2
#define FUNC_GPIO21_VSPIHD 1
#define FUNC_GPIO21_GPIO21_0 0
#define PERIPHS_IO_MUX_GPIO22_U (DR_REG_IO_MUX_BASE +0x80)
#define IO_MUX_GPIO22_REG PERIPHS_IO_MUX_GPIO22_U
#define FUNC_GPIO22_EMAC_TXD1 5
#define FUNC_GPIO22_U0RTS 3
#define FUNC_GPIO22_GPIO22 2
#define FUNC_GPIO22_VSPIWP 1
#define FUNC_GPIO22_GPIO22_0 0
#define PERIPHS_IO_MUX_GPIO23_U (DR_REG_IO_MUX_BASE +0x8c)
#define IO_MUX_GPIO23_REG PERIPHS_IO_MUX_GPIO23_U
#define FUNC_GPIO23_HS1_STROBE 3
#define FUNC_GPIO23_GPIO23 2
#define FUNC_GPIO23_VSPID 1
#define FUNC_GPIO23_GPIO23_0 0
#define PERIPHS_IO_MUX_GPIO24_U (DR_REG_IO_MUX_BASE +0x90)
#define IO_MUX_GPIO24_REG PERIPHS_IO_MUX_GPIO24_U
#define FUNC_GPIO24_GPIO24 2
#define FUNC_GPIO24_GPIO24_0 0
#define PERIPHS_IO_MUX_GPIO25_U (DR_REG_IO_MUX_BASE +0x24)
#define IO_MUX_GPIO25_REG PERIPHS_IO_MUX_GPIO25_U
#define FUNC_GPIO25_EMAC_RXD0 5
#define FUNC_GPIO25_GPIO25 2
#define FUNC_GPIO25_GPIO25_0 0
#define PERIPHS_IO_MUX_GPIO26_U (DR_REG_IO_MUX_BASE +0x28)
#define IO_MUX_GPIO26_REG PERIPHS_IO_MUX_GPIO26_U
#define FUNC_GPIO26_EMAC_RXD1 5
#define FUNC_GPIO26_GPIO26 2
#define FUNC_GPIO26_GPIO26_0 0
#define PERIPHS_IO_MUX_GPIO27_U (DR_REG_IO_MUX_BASE +0x2c)
#define IO_MUX_GPIO27_REG PERIPHS_IO_MUX_GPIO27_U
#define FUNC_GPIO27_EMAC_RX_DV 5
#define FUNC_GPIO27_GPIO27 2
#define FUNC_GPIO27_GPIO27_0 0
#define PERIPHS_IO_MUX_GPIO32_U (DR_REG_IO_MUX_BASE +0x1c)
#define IO_MUX_GPIO32_REG PERIPHS_IO_MUX_GPIO32_U
#define FUNC_GPIO32_GPIO32 2
#define FUNC_GPIO32_GPIO32_0 0
#define PERIPHS_IO_MUX_GPIO33_U (DR_REG_IO_MUX_BASE +0x20)
#define IO_MUX_GPIO33_REG PERIPHS_IO_MUX_GPIO33_U
#define FUNC_GPIO33_GPIO33 2
#define FUNC_GPIO33_GPIO33_0 0
#define PERIPHS_IO_MUX_GPIO34_U (DR_REG_IO_MUX_BASE +0x14)
#define IO_MUX_GPIO34_REG PERIPHS_IO_MUX_GPIO34_U
#define FUNC_GPIO34_GPIO34 2
#define FUNC_GPIO34_GPIO34_0 0
#define PERIPHS_IO_MUX_GPIO35_U (DR_REG_IO_MUX_BASE +0x18)
#define IO_MUX_GPIO35_REG PERIPHS_IO_MUX_GPIO35_U
#define FUNC_GPIO35_GPIO35 2
#define FUNC_GPIO35_GPIO35_0 0
#define PERIPHS_IO_MUX_GPIO36_U (DR_REG_IO_MUX_BASE +0x04)
#define IO_MUX_GPIO36_REG PERIPHS_IO_MUX_GPIO36_U
#define FUNC_GPIO36_GPIO36 2
#define FUNC_GPIO36_GPIO36_0 0
#define PERIPHS_IO_MUX_GPIO37_U (DR_REG_IO_MUX_BASE +0x08)
#define IO_MUX_GPIO37_REG PERIPHS_IO_MUX_GPIO37_U
#define FUNC_GPIO37_GPIO37 2
#define FUNC_GPIO37_GPIO37_0 0
#define PERIPHS_IO_MUX_GPIO38_U (DR_REG_IO_MUX_BASE +0x0c)
#define IO_MUX_GPIO38_REG PERIPHS_IO_MUX_GPIO38_U
#define FUNC_GPIO38_GPIO38 2
#define FUNC_GPIO38_GPIO38_0 0
#define PERIPHS_IO_MUX_GPIO39_U (DR_REG_IO_MUX_BASE +0x10)
#define IO_MUX_GPIO39_REG PERIPHS_IO_MUX_GPIO39_U
#define FUNC_GPIO39_GPIO39 2
#define FUNC_GPIO39_GPIO39_0 0
#endif /* _SOC_IO_MUX_REG_H_ */

24
tools/sdk/esp32/include/soc/soc/esp32/include/soc/ledc_caps.h Normal file
View File

@ -0,0 +1,24 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#define SOC_LEDC_SUPPORT_HS_MODE (1)
#ifdef __cplusplus
}
#endif

2463
tools/sdk/esp32/include/soc/soc/esp32/include/soc/ledc_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

258
tools/sdk/esp32/include/soc/soc/esp32/include/soc/ledc_struct.h Normal file
View File

@ -0,0 +1,258 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_LEDC_STRUCT_H_
#define _SOC_LEDC_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct ledc_dev_s {
struct {
struct {
union {
struct {
uint32_t timer_sel: 2; /*There are four high speed timers the two bits are used to select one of them for high speed channel. 2'b00: seletc hstimer0. 2'b01: select hstimer1. 2'b10: select hstimer2. 2'b11: select hstimer3.*/
uint32_t sig_out_en: 1; /*This is the output enable control bit for high speed channel*/
uint32_t idle_lv: 1; /*This bit is used to control the output value when high speed channel is off.*/
uint32_t low_speed_update: 1; /*This bit is only useful for low speed timer channels, reserved for high speed timers*/
uint32_t reserved4: 26;
uint32_t clk_en: 1; /*This bit is clock gating control signal. when software configure LED_PWM internal registers it controls the register clock.*/
};
uint32_t val;
} conf0;
union {
struct {
uint32_t hpoint: 20; /*The output value changes to high when htimerx(x=[0 3]) selected by high speed channel has reached reg_hpoint_hsch0[19:0]*/
uint32_t reserved20: 12;
};
uint32_t val;
} hpoint;
union {
struct {
uint32_t duty: 25; /*The register is used to control output duty. When hstimerx(x=[0 3]) chosen by high speed channel has reached reg_lpoint_hsch0 the output signal changes to low. reg_lpoint_hsch0=(reg_hpoint_hsch0[19:0]+reg_duty_hsch0[24:4]) (1) reg_lpoint_hsch0=(reg_hpoint_hsch0[19:0]+reg_duty_hsch0[24:4] +1) (2) The least four bits in this register represent the decimal part and determines when to choose (1) or (2)*/
uint32_t reserved25: 7;
};
uint32_t val;
} duty;
union {
struct {
uint32_t duty_scale:10; /*This register controls the increase or decrease step scale for high speed channel.*/
uint32_t duty_cycle:10; /*This register is used to increase or decrease the duty every reg_duty_cycle_hsch0 cycles for high speed channel.*/
uint32_t duty_num: 10; /*This register is used to control the number of increased or decreased times for high speed channel.*/
uint32_t duty_inc: 1; /*This register is used to increase the duty of output signal or decrease the duty of output signal for high speed channel.*/
uint32_t duty_start: 1; /*When reg_duty_num_hsch0 reg_duty_cycle_hsch0 and reg_duty_scale_hsch0 has been configured. these register won't take effect until set reg_duty_start_hsch0. this bit is automatically cleared by hardware.*/
};
uint32_t val;
} conf1;
union {
struct {
uint32_t duty_read: 25; /*This register represents the current duty of the output signal for high speed channel.*/
uint32_t reserved25: 7;
};
uint32_t val;
} duty_rd;
} channel[8];
} channel_group[2]; /*two channel groups : 0: high-speed channels; 1: low-speed channels*/
struct {
struct {
union {
struct {
uint32_t duty_resolution: 5; /*This register controls resolution of PWN duty by defining the bit width of timer's counter. The max bit width of the counter is 20.*/
uint32_t clock_divider: 18; /*This register is used to configure the divider of clock at the entry of timer. The least significant eight bits represent the decimal part.*/
uint32_t pause: 1; /*This bit is used to pause the counter in high speed timer*/
uint32_t rst: 1; /*This bit is used to reset high speed timer the counter will be 0 after reset.*/
uint32_t tick_sel: 1; /*This bit is used to choose apb_clk or ref_tick for high speed timer. 1'b1:apb_clk 0:ref_tick*/
uint32_t low_speed_update: 1; /*This bit is only useful for low speed timer channels, reserved for high speed timers*/
uint32_t reserved26: 5;
};
uint32_t val;
} conf;
union {
struct {
uint32_t timer_cnt: 20; /*software can read this register to get the current counter value in high speed timer*/
uint32_t reserved20: 12;
};
uint32_t val;
} value;
} timer[4];
} timer_group[2]; /*two channel groups : 0: high-speed channels; 1: low-speed channels*/
union {
struct {
uint32_t hstimer0_ovf: 1; /*The interrupt raw bit for high speed channel0 counter overflow.*/
uint32_t hstimer1_ovf: 1; /*The interrupt raw bit for high speed channel1 counter overflow.*/
uint32_t hstimer2_ovf: 1; /*The interrupt raw bit for high speed channel2 counter overflow.*/
uint32_t hstimer3_ovf: 1; /*The interrupt raw bit for high speed channel3 counter overflow.*/
uint32_t lstimer0_ovf: 1; /*The interrupt raw bit for low speed channel0 counter overflow.*/
uint32_t lstimer1_ovf: 1; /*The interrupt raw bit for low speed channel1 counter overflow.*/
uint32_t lstimer2_ovf: 1; /*The interrupt raw bit for low speed channel2 counter overflow.*/
uint32_t lstimer3_ovf: 1; /*The interrupt raw bit for low speed channel3 counter overflow.*/
uint32_t duty_chng_end_hsch0: 1; /*The interrupt raw bit for high speed channel 0 duty change done.*/
uint32_t duty_chng_end_hsch1: 1; /*The interrupt raw bit for high speed channel 1 duty change done.*/
uint32_t duty_chng_end_hsch2: 1; /*The interrupt raw bit for high speed channel 2 duty change done.*/
uint32_t duty_chng_end_hsch3: 1; /*The interrupt raw bit for high speed channel 3 duty change done.*/
uint32_t duty_chng_end_hsch4: 1; /*The interrupt raw bit for high speed channel 4 duty change done.*/
uint32_t duty_chng_end_hsch5: 1; /*The interrupt raw bit for high speed channel 5 duty change done.*/
uint32_t duty_chng_end_hsch6: 1; /*The interrupt raw bit for high speed channel 6 duty change done.*/
uint32_t duty_chng_end_hsch7: 1; /*The interrupt raw bit for high speed channel 7 duty change done.*/
uint32_t duty_chng_end_lsch0: 1; /*The interrupt raw bit for low speed channel 0 duty change done.*/
uint32_t duty_chng_end_lsch1: 1; /*The interrupt raw bit for low speed channel 1 duty change done.*/
uint32_t duty_chng_end_lsch2: 1; /*The interrupt raw bit for low speed channel 2 duty change done.*/
uint32_t duty_chng_end_lsch3: 1; /*The interrupt raw bit for low speed channel 3 duty change done.*/
uint32_t duty_chng_end_lsch4: 1; /*The interrupt raw bit for low speed channel 4 duty change done.*/
uint32_t duty_chng_end_lsch5: 1; /*The interrupt raw bit for low speed channel 5 duty change done.*/
uint32_t duty_chng_end_lsch6: 1; /*The interrupt raw bit for low speed channel 6 duty change done.*/
uint32_t duty_chng_end_lsch7: 1; /*The interrupt raw bit for low speed channel 7 duty change done.*/
uint32_t reserved24: 8;
};
uint32_t val;
} int_raw;
union {
struct {
uint32_t hstimer0_ovf: 1; /*The interrupt status bit for high speed channel0 counter overflow event.*/
uint32_t hstimer1_ovf: 1; /*The interrupt status bit for high speed channel1 counter overflow event.*/
uint32_t hstimer2_ovf: 1; /*The interrupt status bit for high speed channel2 counter overflow event.*/
uint32_t hstimer3_ovf: 1; /*The interrupt status bit for high speed channel3 counter overflow event.*/
uint32_t lstimer0_ovf: 1; /*The interrupt status bit for low speed channel0 counter overflow event.*/
uint32_t lstimer1_ovf: 1; /*The interrupt status bit for low speed channel1 counter overflow event.*/
uint32_t lstimer2_ovf: 1; /*The interrupt status bit for low speed channel2 counter overflow event.*/
uint32_t lstimer3_ovf: 1; /*The interrupt status bit for low speed channel3 counter overflow event.*/
uint32_t duty_chng_end_hsch0: 1; /*The interrupt enable bit for high speed channel 0 duty change done event.*/
uint32_t duty_chng_end_hsch1: 1; /*The interrupt status bit for high speed channel 1 duty change done event.*/
uint32_t duty_chng_end_hsch2: 1; /*The interrupt status bit for high speed channel 2 duty change done event.*/
uint32_t duty_chng_end_hsch3: 1; /*The interrupt status bit for high speed channel 3 duty change done event.*/
uint32_t duty_chng_end_hsch4: 1; /*The interrupt status bit for high speed channel 4 duty change done event.*/
uint32_t duty_chng_end_hsch5: 1; /*The interrupt status bit for high speed channel 5 duty change done event.*/
uint32_t duty_chng_end_hsch6: 1; /*The interrupt status bit for high speed channel 6 duty change done event.*/
uint32_t duty_chng_end_hsch7: 1; /*The interrupt status bit for high speed channel 7 duty change done event.*/
uint32_t duty_chng_end_lsch0: 1; /*The interrupt status bit for low speed channel 0 duty change done event.*/
uint32_t duty_chng_end_lsch1: 1; /*The interrupt status bit for low speed channel 1 duty change done event.*/
uint32_t duty_chng_end_lsch2: 1; /*The interrupt status bit for low speed channel 2 duty change done event.*/
uint32_t duty_chng_end_lsch3: 1; /*The interrupt status bit for low speed channel 3 duty change done event.*/
uint32_t duty_chng_end_lsch4: 1; /*The interrupt status bit for low speed channel 4 duty change done event.*/
uint32_t duty_chng_end_lsch5: 1; /*The interrupt status bit for low speed channel 5 duty change done event.*/
uint32_t duty_chng_end_lsch6: 1; /*The interrupt status bit for low speed channel 6 duty change done event.*/
uint32_t duty_chng_end_lsch7: 1; /*The interrupt status bit for low speed channel 7 duty change done event*/
uint32_t reserved24: 8;
};
uint32_t val;
} int_st;
union {
struct {
uint32_t hstimer0_ovf: 1; /*The interrupt enable bit for high speed channel0 counter overflow interrupt.*/
uint32_t hstimer1_ovf: 1; /*The interrupt enable bit for high speed channel1 counter overflow interrupt.*/
uint32_t hstimer2_ovf: 1; /*The interrupt enable bit for high speed channel2 counter overflow interrupt.*/
uint32_t hstimer3_ovf: 1; /*The interrupt enable bit for high speed channel3 counter overflow interrupt.*/
uint32_t lstimer0_ovf: 1; /*The interrupt enable bit for low speed channel0 counter overflow interrupt.*/
uint32_t lstimer1_ovf: 1; /*The interrupt enable bit for low speed channel1 counter overflow interrupt.*/
uint32_t lstimer2_ovf: 1; /*The interrupt enable bit for low speed channel2 counter overflow interrupt.*/
uint32_t lstimer3_ovf: 1; /*The interrupt enable bit for low speed channel3 counter overflow interrupt.*/
uint32_t duty_chng_end_hsch0: 1; /*The interrupt enable bit for high speed channel 0 duty change done interrupt.*/
uint32_t duty_chng_end_hsch1: 1; /*The interrupt enable bit for high speed channel 1 duty change done interrupt.*/
uint32_t duty_chng_end_hsch2: 1; /*The interrupt enable bit for high speed channel 2 duty change done interrupt.*/
uint32_t duty_chng_end_hsch3: 1; /*The interrupt enable bit for high speed channel 3 duty change done interrupt.*/
uint32_t duty_chng_end_hsch4: 1; /*The interrupt enable bit for high speed channel 4 duty change done interrupt.*/
uint32_t duty_chng_end_hsch5: 1; /*The interrupt enable bit for high speed channel 5 duty change done interrupt.*/
uint32_t duty_chng_end_hsch6: 1; /*The interrupt enable bit for high speed channel 6 duty change done interrupt.*/
uint32_t duty_chng_end_hsch7: 1; /*The interrupt enable bit for high speed channel 7 duty change done interrupt.*/
uint32_t duty_chng_end_lsch0: 1; /*The interrupt enable bit for low speed channel 0 duty change done interrupt.*/
uint32_t duty_chng_end_lsch1: 1; /*The interrupt enable bit for low speed channel 1 duty change done interrupt.*/
uint32_t duty_chng_end_lsch2: 1; /*The interrupt enable bit for low speed channel 2 duty change done interrupt.*/
uint32_t duty_chng_end_lsch3: 1; /*The interrupt enable bit for low speed channel 3 duty change done interrupt.*/
uint32_t duty_chng_end_lsch4: 1; /*The interrupt enable bit for low speed channel 4 duty change done interrupt.*/
uint32_t duty_chng_end_lsch5: 1; /*The interrupt enable bit for low speed channel 5 duty change done interrupt.*/
uint32_t duty_chng_end_lsch6: 1; /*The interrupt enable bit for low speed channel 6 duty change done interrupt.*/
uint32_t duty_chng_end_lsch7: 1; /*The interrupt enable bit for low speed channel 7 duty change done interrupt.*/
uint32_t reserved24: 8;
};
uint32_t val;
} int_ena;
union {
struct {
uint32_t hstimer0_ovf: 1; /*Set this bit to clear high speed channel0 counter overflow interrupt.*/
uint32_t hstimer1_ovf: 1; /*Set this bit to clear high speed channel1 counter overflow interrupt.*/
uint32_t hstimer2_ovf: 1; /*Set this bit to clear high speed channel2 counter overflow interrupt.*/
uint32_t hstimer3_ovf: 1; /*Set this bit to clear high speed channel3 counter overflow interrupt.*/
uint32_t lstimer0_ovf: 1; /*Set this bit to clear low speed channel0 counter overflow interrupt.*/
uint32_t lstimer1_ovf: 1; /*Set this bit to clear low speed channel1 counter overflow interrupt.*/
uint32_t lstimer2_ovf: 1; /*Set this bit to clear low speed channel2 counter overflow interrupt.*/
uint32_t lstimer3_ovf: 1; /*Set this bit to clear low speed channel3 counter overflow interrupt.*/
uint32_t duty_chng_end_hsch0: 1; /*Set this bit to clear high speed channel 0 duty change done interrupt.*/
uint32_t duty_chng_end_hsch1: 1; /*Set this bit to clear high speed channel 1 duty change done interrupt.*/
uint32_t duty_chng_end_hsch2: 1; /*Set this bit to clear high speed channel 2 duty change done interrupt.*/
uint32_t duty_chng_end_hsch3: 1; /*Set this bit to clear high speed channel 3 duty change done interrupt.*/
uint32_t duty_chng_end_hsch4: 1; /*Set this bit to clear high speed channel 4 duty change done interrupt.*/
uint32_t duty_chng_end_hsch5: 1; /*Set this bit to clear high speed channel 5 duty change done interrupt.*/
uint32_t duty_chng_end_hsch6: 1; /*Set this bit to clear high speed channel 6 duty change done interrupt.*/
uint32_t duty_chng_end_hsch7: 1; /*Set this bit to clear high speed channel 7 duty change done interrupt.*/
uint32_t duty_chng_end_lsch0: 1; /*Set this bit to clear low speed channel 0 duty change done interrupt.*/
uint32_t duty_chng_end_lsch1: 1; /*Set this bit to clear low speed channel 1 duty change done interrupt.*/
uint32_t duty_chng_end_lsch2: 1; /*Set this bit to clear low speed channel 2 duty change done interrupt.*/
uint32_t duty_chng_end_lsch3: 1; /*Set this bit to clear low speed channel 3 duty change done interrupt.*/
uint32_t duty_chng_end_lsch4: 1; /*Set this bit to clear low speed channel 4 duty change done interrupt.*/
uint32_t duty_chng_end_lsch5: 1; /*Set this bit to clear low speed channel 5 duty change done interrupt.*/
uint32_t duty_chng_end_lsch6: 1; /*Set this bit to clear low speed channel 6 duty change done interrupt.*/
uint32_t duty_chng_end_lsch7: 1; /*Set this bit to clear low speed channel 7 duty change done interrupt.*/
uint32_t reserved24: 8;
};
uint32_t val;
} int_clr;
union {
struct {
uint32_t apb_clk_sel: 1; /*This bit decides the slow clock for LEDC low speed channels, so we want to replace the field name with slow_clk_sel*/
uint32_t reserved1: 31;
};
struct {
uint32_t slow_clk_sel: 1; /*This bit is used to set the frequency of slow_clk. 1'b1:80mhz 1'b0:8mhz, (only used by LEDC low speed channels/timers)*/
uint32_t reserved: 31;
};
uint32_t val;
} conf;
uint32_t reserved_194;
uint32_t reserved_198;
uint32_t reserved_19c;
uint32_t reserved_1a0;
uint32_t reserved_1a4;
uint32_t reserved_1a8;
uint32_t reserved_1ac;
uint32_t reserved_1b0;
uint32_t reserved_1b4;
uint32_t reserved_1b8;
uint32_t reserved_1bc;
uint32_t reserved_1c0;
uint32_t reserved_1c4;
uint32_t reserved_1c8;
uint32_t reserved_1cc;
uint32_t reserved_1d0;
uint32_t reserved_1d4;
uint32_t reserved_1d8;
uint32_t reserved_1dc;
uint32_t reserved_1e0;
uint32_t reserved_1e4;
uint32_t reserved_1e8;
uint32_t reserved_1ec;
uint32_t reserved_1f0;
uint32_t reserved_1f4;
uint32_t reserved_1f8;
uint32_t date; /*This register represents the version .*/
} ledc_dev_t;
extern ledc_dev_t LEDC;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_LEDC_STRUCT_H_ */

22
tools/sdk/esp32/include/soc/soc/esp32/include/soc/mcpwm_caps.h Normal file
View File

@ -0,0 +1,22 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#define SOC_MCPWM_PERIPH_NUM 2 ///< MCPWM peripheral number
#define SOC_MCPWM_TIMER_NUM 3 ///< Timer that each peripheral has
#define SOC_MCPWM_OP_NUM 3 ///< Operator that each peripheral has
#define SOC_MCPWM_COMPARATOR_NUM 2 ///< Comparator that each operator has
#define SOC_MCPWM_GENERATOR_NUM 2 ///< Generator that each operator has
#define SOC_MCPWM_FAULT_SIG_NUM 3 ///< Fault signal number that each peripheral has

3028
tools/sdk/esp32/include/soc/soc/esp32/include/soc/mcpwm_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

464
tools/sdk/esp32/include/soc/soc/esp32/include/soc/mcpwm_struct.h Normal file
View File

@ -0,0 +1,464 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_MCPWM_STRUCT_H__
#define _SOC_MCPWM_STRUCT_H__
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct mcpwm_dev_s {
union {
struct {
uint32_t prescale: 8; /*Period of PWM_clk = 6.25ns * (PWM_CLK_PRESCALE + 1)*/
uint32_t reserved8: 24;
};
uint32_t val;
}clk_cfg;
struct {
union {
struct {
uint32_t prescale: 8; /*period of PT0_clk = Period of PWM_clk * (PWM_TIMER0_PRESCALE + 1)*/
uint32_t period: 16; /*period shadow reg of PWM timer0*/
uint32_t upmethod: 2; /*Update method for active reg of PWM timer0 period 0: immediate 1: TEZ 2: sync 3: TEZ | sync. TEZ here and below means timer equal zero event*/
uint32_t reserved26: 6;
};
uint32_t val;
}period;
union {
struct {
uint32_t start: 3; /*PWM timer0 start and stop control. 0: stop @ TEZ 1: stop @ TEP 2: free run 3: start and stop @ next TEZ 4: start and stop @ next TEP. TEP here and below means timer equal period event*/
uint32_t mode: 2; /*PWM timer0 working mode 0: freeze 1: increase mod 2: decrease mod 3: up-down mod*/
uint32_t reserved5: 27;
};
uint32_t val;
}mode;
union {
struct {
uint32_t in_en: 1; /*when set timer reload with phase on sync input event is enabled*/
uint32_t sync_sw: 1; /*write the negate value will trigger a software sync*/
uint32_t out_sel: 2; /*PWM timer0 synco selection 0: synci 1: TEZ 2: TEP else 0*/
uint32_t timer_phase: 17; /*phase for timer reload on sync event*/
uint32_t reserved21: 11;
};
uint32_t val;
}sync;
union {
struct {
uint32_t value: 16; /*current PWM timer0 counter value*/
uint32_t direction: 1; /*current PWM timer0 counter direction 0: increment 1: decrement*/
uint32_t reserved17: 15;
};
uint32_t val;
}status;
}timer[3];
union {
struct {
uint32_t t0_in_sel: 3; /*select sync input for PWM timer0 1: PWM timer0 synco 2: PWM timer1 synco 3: PWM timer2 synco 4: SYNC0 from GPIO matrix 5: SYNC1 from GPIO matrix 6: SYNC2 from GPIO matrix else: none*/
uint32_t t1_in_sel: 3; /*select sync input for PWM timer1 1: PWM timer0 synco 2: PWM timer1 synco 3: PWM timer2 synco 4: SYNC0 from GPIO matrix 5: SYNC1 from GPIO matrix 6: SYNC2 from GPIO matrix else: none*/
uint32_t t2_in_sel: 3; /*select sync input for PWM timer2 1: PWM timer0 synco 2: PWM timer1 synco 3: PWM timer2 synco 4: SYNC0 from GPIO matrix 5: SYNC1 from GPIO matrix 6: SYNC2 from GPIO matrix else: none*/
uint32_t ext_in0_inv: 1; /*invert SYNC0 from GPIO matrix*/
uint32_t ext_in1_inv: 1; /*invert SYNC1 from GPIO matrix*/
uint32_t ext_in2_inv: 1; /*invert SYNC2 from GPIO matrix*/
uint32_t reserved12: 20;
};
uint32_t val;
}timer_synci_cfg;
union {
struct {
uint32_t operator0_sel: 2; /*Select which PWM timer's is the timing reference for PWM operator0 0: timer0 1: timer1 2: timer2*/
uint32_t operator1_sel: 2; /*Select which PWM timer's is the timing reference for PWM operator1 0: timer0 1: timer1 2: timer2*/
uint32_t operator2_sel: 2; /*Select which PWM timer's is the timing reference for PWM operator2 0: timer0 1: timer1 2: timer2*/
uint32_t reserved6: 26;
};
uint32_t val;
}timer_sel;
struct {
union {
struct {
uint32_t a_upmethod: 4; /*Update method for PWM compare0 A's active reg. 0: immediate bit0: TEZ bit1: TEP bit2: sync bit3: freeze*/
uint32_t b_upmethod: 4; /*Update method for PWM compare0 B's active reg. 0: immediate bit0: TEZ bit1: TEP bit2: sync bit3: freeze*/
uint32_t a_shdw_full: 1; /*Set and reset by hardware. If set PWM compare0 A's shadow reg is filled and waiting to be transferred to A's active reg. If cleared A's active reg has been updated with shadow reg latest value*/
uint32_t b_shdw_full: 1; /*Set and reset by hardware. If set PWM compare0 B's shadow reg is filled and waiting to be transferred to B's active reg. If cleared B's active reg has been updated with shadow reg latest value*/
uint32_t reserved10: 22;
};
uint32_t val;
}cmpr_cfg;
union {
struct {
uint32_t cmpr_val: 16; /*PWM compare0 A's shadow reg*/
uint32_t reserved16:16;
};
uint32_t val;
}cmpr_value[2];
union {
struct {
uint32_t upmethod: 4; /*Update method for PWM generate0's active reg of configuration. 0: immediate bit0: TEZ bit1: TEP bit2: sync. bit3: freeze*/
uint32_t t0_sel: 3; /*Source selection for PWM generate0 event_t0 take effect immediately 0: fault_event0 1: fault_event1 2: fault_event2 3: sync_taken 4: none*/
uint32_t t1_sel: 3; /*Source selection for PWM generate0 event_t1 take effect immediately 0: fault_event0 1: fault_event1 2: fault_event2 3: sync_taken 4: none*/
uint32_t reserved10: 22;
};
uint32_t val;
}gen_cfg0;
union {
struct {
uint32_t cntu_force_upmethod: 6; /*Update method for continuous software force of PWM generate0. 0: immediate bit0: TEZ bit1: TEP bit2: TEA bit3: TEB bit4: sync bit5: freeze. (TEA/B here and below means timer equals A/B event)*/
uint32_t a_cntuforce_mode: 2; /*Continuous software force mode for PWM0A. 0: disabled 1: low 2: high 3: disabled*/
uint32_t b_cntuforce_mode: 2; /*Continuous software force mode for PWM0B. 0: disabled 1: low 2: high 3: disabled*/
uint32_t a_nciforce: 1; /*non-continuous immediate software force trigger for PWM0A a toggle will trigger a force event*/
uint32_t a_nciforce_mode: 2; /*non-continuous immediate software force mode for PWM0A 0: disabled 1: low 2: high 3: disabled*/
uint32_t b_nciforce: 1; /*non-continuous immediate software force trigger for PWM0B a toggle will trigger a force event*/
uint32_t b_nciforce_mode: 2; /*non-continuous immediate software force mode for PWM0B 0: disabled 1: low 2: high 3: disabled*/
uint32_t reserved16: 16;
};
uint32_t val;
}gen_force;
union {
struct {
uint32_t utez: 2; /*Action on PWM0A triggered by event TEZ when timer increasing*/
uint32_t utep: 2; /*Action on PWM0A triggered by event TEP when timer increasing*/
uint32_t utea: 2; /*Action on PWM0A triggered by event TEA when timer increasing*/
uint32_t uteb: 2; /*Action on PWM0A triggered by event TEB when timer increasing*/
uint32_t ut0: 2; /*Action on PWM0A triggered by event_t0 when timer increasing*/
uint32_t ut1: 2; /*Action on PWM0A triggered by event_t1 when timer increasing*/
uint32_t dtez: 2; /*Action on PWM0A triggered by event TEZ when timer decreasing*/
uint32_t dtep: 2; /*Action on PWM0A triggered by event TEP when timer decreasing*/
uint32_t dtea: 2; /*Action on PWM0A triggered by event TEA when timer decreasing*/
uint32_t dteb: 2; /*Action on PWM0A triggered by event TEB when timer decreasing*/
uint32_t dt0: 2; /*Action on PWM0A triggered by event_t0 when timer decreasing*/
uint32_t dt1: 2; /*Action on PWM0A triggered by event_t1 when timer decreasing. 0: no change 1: low 2: high 3: toggle*/
uint32_t reserved24: 8;
};
uint32_t val;
}generator[2];
union {
struct {
uint32_t fed_upmethod: 4; /*Update method for FED (falling edge delay) active reg. 0: immediate bit0: tez bit1: tep bit2: sync bit3: freeze*/
uint32_t red_upmethod: 4; /*Update method for RED (rising edge delay) active reg. 0: immediate bit0: tez bit1: tep bit2: sync bit3: freeze*/
uint32_t deb_mode: 1; /*S8 in documentation dual-edge B mode 0: fed/red take effect on different path separately 1: fed/red take effect on B path A out is in bypass or dulpB mode*/
uint32_t a_outswap: 1; /*S6 in documentation*/
uint32_t b_outswap: 1; /*S7 in documentation*/
uint32_t red_insel: 1; /*S4 in documentation*/
uint32_t fed_insel: 1; /*S5 in documentation*/
uint32_t red_outinvert: 1; /*S2 in documentation*/
uint32_t fed_outinvert: 1; /*S3 in documentation*/
uint32_t a_outbypass: 1; /*S1 in documentation*/
uint32_t b_outbypass: 1; /*S0 in documentation*/
uint32_t clk_sel: 1; /*Dead band0 clock selection. 0: PWM_clk 1: PT_clk*/
uint32_t reserved18: 14;
};
uint32_t val;
}db_cfg;
union {
struct {
uint32_t fed: 16; /*Shadow reg for FED*/
uint32_t reserved16:16;
};
uint32_t val;
}db_fed_cfg;
union {
struct {
uint32_t red: 16; /*Shadow reg for RED*/
uint32_t reserved16:16;
};
uint32_t val;
}db_red_cfg;
union {
struct {
uint32_t en: 1; /*When set carrier0 function is enabled. When reset carrier0 is bypassed*/
uint32_t prescale: 4; /*carrier0 clk (CP_clk) prescale value. Period of CP_clk = period of PWM_clk * (PWM_CARRIER0_PRESCALE + 1)*/
uint32_t duty: 3; /*carrier duty selection. Duty = PWM_CARRIER0_DUTY / 8*/
uint32_t oshtwth: 4; /*width of the fist pulse in number of periods of the carrier*/
uint32_t out_invert: 1; /*when set invert the output of PWM0A and PWM0B for this submodule*/
uint32_t in_invert: 1; /*when set invert the input of PWM0A and PWM0B for this submodule*/
uint32_t reserved14: 18;
};
uint32_t val;
}carrier_cfg;
union {
struct {
uint32_t sw_cbc: 1; /*Cycle-by-cycle tripping software force event will trigger cycle-by-cycle trip event. 0: disable 1: enable*/
uint32_t f2_cbc: 1; /*event_f2 will trigger cycle-by-cycle trip event. 0: disable 1: enable*/
uint32_t f1_cbc: 1; /*event_f1 will trigger cycle-by-cycle trip event. 0: disable 1: enable*/
uint32_t f0_cbc: 1; /*event_f0 will trigger cycle-by-cycle trip event. 0: disable 1: enable*/
uint32_t sw_ost: 1; /*one-shot tripping software force event will trigger one-shot trip event. 0: disable 1: enable*/
uint32_t f2_ost: 1; /*event_f2 will trigger one-shot trip event. 0: disable 1: enable*/
uint32_t f1_ost: 1; /*event_f1 will trigger one-shot trip event. 0: disable 1: enable*/
uint32_t f0_ost: 1; /*event_f0 will trigger one-shot trip event. 0: disable 1: enable*/
uint32_t a_cbc_d: 2; /*Action on PWM0A when cycle-by-cycle trip event occurs and timer is decreasing. 0: do nothing 1: force lo 2: force hi 3: toggle*/
uint32_t a_cbc_u: 2; /*Action on PWM0A when cycle-by-cycle trip event occurs and timer is increasing. 0: do nothing 1: force lo 2: force hi 3: toggle*/
uint32_t a_ost_d: 2; /*Action on PWM0A when one-shot trip event occurs and timer is decreasing. 0: do nothing 1: force lo 2: force hi 3: toggle*/
uint32_t a_ost_u: 2; /*Action on PWM0A when one-shot trip event occurs and timer is increasing. 0: do nothing 1: force lo 2: force hi 3: toggle*/
uint32_t b_cbc_d: 2; /*Action on PWM0B when cycle-by-cycle trip event occurs and timer is decreasing. 0: do nothing 1: force lo 2: force hi 3: toggle*/
uint32_t b_cbc_u: 2; /*Action on PWM0B when cycle-by-cycle trip event occurs and timer is increasing. 0: do nothing 1: force lo 2: force hi 3: toggle*/
uint32_t b_ost_d: 2; /*Action on PWM0B when one-shot trip event occurs and timer is decreasing. 0: do nothing 1: force lo 2: force hi 3: toggle*/
uint32_t b_ost_u: 2; /*Action on PWM0B when one-shot trip event occurs and timer is increasing. 0: do nothing 1: force lo 2: force hi 3: toggle*/
uint32_t reserved24: 8;
};
uint32_t val;
}tz_cfg0;
union {
struct {
uint32_t clr_ost: 1; /*a toggle will clear on going one-shot tripping*/
uint32_t cbcpulse: 2; /*cycle-by-cycle tripping refresh moment selection. Bit0: TEZ bit1:TEP*/
uint32_t force_cbc: 1; /*a toggle trigger a cycle-by-cycle tripping software force event*/
uint32_t force_ost: 1; /*a toggle (software negate its value) trigger a one-shot tripping software force event*/
uint32_t reserved5: 27;
};
uint32_t val;
}tz_cfg1;
union {
struct {
uint32_t cbc_on: 1; /*Set and reset by hardware. If set an cycle-by-cycle trip event is on going*/
uint32_t ost_on: 1; /*Set and reset by hardware. If set an one-shot trip event is on going*/
uint32_t reserved2: 30;
};
uint32_t val;
}tz_status;
}channel[3];
union {
struct {
uint32_t f0_en: 1; /*When set event_f0 generation is enabled*/
uint32_t f1_en: 1; /*When set event_f1 generation is enabled*/
uint32_t f2_en: 1; /*When set event_f2 generation is enabled*/
uint32_t f0_pole: 1; /*Set event_f0 trigger polarity on FAULT2 source from GPIO matrix. 0: level low 1: level high*/
uint32_t f1_pole: 1; /*Set event_f1 trigger polarity on FAULT2 source from GPIO matrix. 0: level low 1: level high*/
uint32_t f2_pole: 1; /*Set event_f2 trigger polarity on FAULT2 source from GPIO matrix. 0: level low 1: level high*/
uint32_t event_f0: 1; /*Set and reset by hardware. If set event_f0 is on going*/
uint32_t event_f1: 1; /*Set and reset by hardware. If set event_f1 is on going*/
uint32_t event_f2: 1; /*Set and reset by hardware. If set event_f2 is on going*/
uint32_t reserved9: 23;
};
uint32_t val;
}fault_detect;
union {
struct {
uint32_t timer_en: 1; /*When set capture timer incrementing under APB_clk is enabled.*/
uint32_t synci_en: 1; /*When set capture timer sync is enabled.*/
uint32_t synci_sel: 3; /*capture module sync input selection. 0: none 1: timer0 synco 2: timer1 synco 3: timer2 synco 4: SYNC0 from GPIO matrix 5: SYNC1 from GPIO matrix 6: SYNC2 from GPIO matrix*/
uint32_t sync_sw: 1; /*Write 1 will force a capture timer sync capture timer is loaded with value in phase register.*/
uint32_t reserved6: 26;
};
uint32_t val;
}cap_timer_cfg;
uint32_t cap_timer_phase; /*Phase value for capture timer sync operation.*/
union {
struct {
uint32_t en: 1; /*When set capture on channel 0 is enabled*/
uint32_t mode: 2; /*Edge of capture on channel 0 after prescale. bit0: negedge cap en bit1: posedge cap en*/
uint32_t prescale: 8; /*Value of prescale on possitive edge of CAP0. Prescale value = PWM_CAP0_PRESCALE + 1*/
uint32_t in_invert: 1; /*when set CAP0 form GPIO matrix is inverted before prescale*/
uint32_t sw: 1; /*Write 1 will trigger a software forced capture on channel 0*/
uint32_t reserved13: 19;
};
uint32_t val;
}cap_cfg_ch[3];
uint32_t cap_val_ch[3]; /*Value of last capture on channel 0*/
union {
struct {
uint32_t cap0_edge: 1; /*Edge of last capture trigger on channel 0 0: posedge 1: negedge*/
uint32_t cap1_edge: 1; /*Edge of last capture trigger on channel 1 0: posedge 1: negedge*/
uint32_t cap2_edge: 1; /*Edge of last capture trigger on channel 2 0: posedge 1: negedge*/
uint32_t reserved3: 29;
};
uint32_t val;
}cap_status;
union {
struct {
uint32_t global_up_en: 1; /*The global enable of update of all active registers in MCPWM module*/
uint32_t global_force_up: 1; /*a toggle (software invert its value) will trigger a forced update of all active registers in MCPWM module*/
uint32_t op0_up_en: 1; /*When set and PWM_GLOBAL_UP_EN is set update of active registers in PWM operator 0 are enabled*/
uint32_t op0_force_up: 1; /*a toggle (software invert its value) will trigger a forced update of active registers in PWM operator 0*/
uint32_t op1_up_en: 1; /*When set and PWM_GLOBAL_UP_EN is set update of active registers in PWM operator 1 are enabled*/
uint32_t op1_force_up: 1; /*a toggle (software invert its value) will trigger a forced update of active registers in PWM operator 1*/
uint32_t op2_up_en: 1; /*When set and PWM_GLOBAL_UP_EN is set update of active registers in PWM operator 2 are enabled*/
uint32_t op2_force_up: 1; /*a toggle (software invert its value) will trigger a forced update of active registers in PWM operator 2*/
uint32_t reserved8: 24;
};
uint32_t val;
}update_cfg;
union {
struct {
uint32_t timer0_stop_int_ena: 1; /*Interrupt when timer 0 stops*/
uint32_t timer1_stop_int_ena: 1; /*Interrupt when timer 1 stops*/
uint32_t timer2_stop_int_ena: 1; /*Interrupt when timer 2 stops*/
uint32_t timer0_tez_int_ena: 1; /*A PWM timer 0 TEZ event will trigger this interrupt*/
uint32_t timer1_tez_int_ena: 1; /*A PWM timer 1 TEZ event will trigger this interrupt*/
uint32_t timer2_tez_int_ena: 1; /*A PWM timer 2 TEZ event will trigger this interrupt*/
uint32_t timer0_tep_int_ena: 1; /*A PWM timer 0 TEP event will trigger this interrupt*/
uint32_t timer1_tep_int_ena: 1; /*A PWM timer 1 TEP event will trigger this interrupt*/
uint32_t timer2_tep_int_ena: 1; /*A PWM timer 2 TEP event will trigger this interrupt*/
uint32_t fault0_int_ena: 1; /*Interrupt when event_f0 starts*/
uint32_t fault1_int_ena: 1; /*Interrupt when event_f1 starts*/
uint32_t fault2_int_ena: 1; /*Interrupt when event_f2 starts*/
uint32_t fault0_clr_int_ena: 1; /*Interrupt when event_f0 ends*/
uint32_t fault1_clr_int_ena: 1; /*Interrupt when event_f1 ends*/
uint32_t fault2_clr_int_ena: 1; /*Interrupt when event_f2 ends*/
uint32_t cmpr0_tea_int_ena: 1; /*A PWM operator 0 TEA event will trigger this interrupt*/
uint32_t cmpr1_tea_int_ena: 1; /*A PWM operator 1 TEA event will trigger this interrupt*/
uint32_t cmpr2_tea_int_ena: 1; /*A PWM operator 2 TEA event will trigger this interrupt*/
uint32_t cmpr0_teb_int_ena: 1; /*A PWM operator 0 TEB event will trigger this interrupt*/
uint32_t cmpr1_teb_int_ena: 1; /*A PWM operator 1 TEB event will trigger this interrupt*/
uint32_t cmpr2_teb_int_ena: 1; /*A PWM operator 2 TEB event will trigger this interrupt*/
uint32_t tz0_cbc_int_ena: 1; /*An cycle-by-cycle trip event on PWM0 will trigger this interrupt*/
uint32_t tz1_cbc_int_ena: 1; /*An cycle-by-cycle trip event on PWM1 will trigger this interrupt*/
uint32_t tz2_cbc_int_ena: 1; /*An cycle-by-cycle trip event on PWM2 will trigger this interrupt*/
uint32_t tz0_ost_int_ena: 1; /*An one-shot trip event on PWM0 will trigger this interrupt*/
uint32_t tz1_ost_int_ena: 1; /*An one-shot trip event on PWM1 will trigger this interrupt*/
uint32_t tz2_ost_int_ena: 1; /*An one-shot trip event on PWM2 will trigger this interrupt*/
uint32_t cap0_int_ena: 1; /*A capture on channel 0 will trigger this interrupt*/
uint32_t cap1_int_ena: 1; /*A capture on channel 1 will trigger this interrupt*/
uint32_t cap2_int_ena: 1; /*A capture on channel 2 will trigger this interrupt*/
uint32_t reserved30: 2;
};
uint32_t val;
}int_ena;
union {
struct {
uint32_t timer0_stop_int_raw: 1; /*Interrupt when timer 0 stops*/
uint32_t timer1_stop_int_raw: 1; /*Interrupt when timer 1 stops*/
uint32_t timer2_stop_int_raw: 1; /*Interrupt when timer 2 stops*/
uint32_t timer0_tez_int_raw: 1; /*A PWM timer 0 TEZ event will trigger this interrupt*/
uint32_t timer1_tez_int_raw: 1; /*A PWM timer 1 TEZ event will trigger this interrupt*/
uint32_t timer2_tez_int_raw: 1; /*A PWM timer 2 TEZ event will trigger this interrupt*/
uint32_t timer0_tep_int_raw: 1; /*A PWM timer 0 TEP event will trigger this interrupt*/
uint32_t timer1_tep_int_raw: 1; /*A PWM timer 1 TEP event will trigger this interrupt*/
uint32_t timer2_tep_int_raw: 1; /*A PWM timer 2 TEP event will trigger this interrupt*/
uint32_t fault0_int_raw: 1; /*Interrupt when event_f0 starts*/
uint32_t fault1_int_raw: 1; /*Interrupt when event_f1 starts*/
uint32_t fault2_int_raw: 1; /*Interrupt when event_f2 starts*/
uint32_t fault0_clr_int_raw: 1; /*Interrupt when event_f0 ends*/
uint32_t fault1_clr_int_raw: 1; /*Interrupt when event_f1 ends*/
uint32_t fault2_clr_int_raw: 1; /*Interrupt when event_f2 ends*/
uint32_t cmpr0_tea_int_raw: 1; /*A PWM operator 0 TEA event will trigger this interrupt*/
uint32_t cmpr1_tea_int_raw: 1; /*A PWM operator 1 TEA event will trigger this interrupt*/
uint32_t cmpr2_tea_int_raw: 1; /*A PWM operator 2 TEA event will trigger this interrupt*/
uint32_t cmpr0_teb_int_raw: 1; /*A PWM operator 0 TEB event will trigger this interrupt*/
uint32_t cmpr1_teb_int_raw: 1; /*A PWM operator 1 TEB event will trigger this interrupt*/
uint32_t cmpr2_teb_int_raw: 1; /*A PWM operator 2 TEB event will trigger this interrupt*/
uint32_t tz0_cbc_int_raw: 1; /*An cycle-by-cycle trip event on PWM0 will trigger this interrupt*/
uint32_t tz1_cbc_int_raw: 1; /*An cycle-by-cycle trip event on PWM1 will trigger this interrupt*/
uint32_t tz2_cbc_int_raw: 1; /*An cycle-by-cycle trip event on PWM2 will trigger this interrupt*/
uint32_t tz0_ost_int_raw: 1; /*An one-shot trip event on PWM0 will trigger this interrupt*/
uint32_t tz1_ost_int_raw: 1; /*An one-shot trip event on PWM1 will trigger this interrupt*/
uint32_t tz2_ost_int_raw: 1; /*An one-shot trip event on PWM2 will trigger this interrupt*/
uint32_t cap0_int_raw: 1; /*A capture on channel 0 will trigger this interrupt*/
uint32_t cap1_int_raw: 1; /*A capture on channel 1 will trigger this interrupt*/
uint32_t cap2_int_raw: 1; /*A capture on channel 2 will trigger this interrupt*/
uint32_t reserved30: 2;
};
uint32_t val;
}int_raw;
union {
struct {
uint32_t timer0_stop_int_st: 1; /*Interrupt when timer 0 stops*/
uint32_t timer1_stop_int_st: 1; /*Interrupt when timer 1 stops*/
uint32_t timer2_stop_int_st: 1; /*Interrupt when timer 2 stops*/
uint32_t timer0_tez_int_st: 1; /*A PWM timer 0 TEZ event will trigger this interrupt*/
uint32_t timer1_tez_int_st: 1; /*A PWM timer 1 TEZ event will trigger this interrupt*/
uint32_t timer2_tez_int_st: 1; /*A PWM timer 2 TEZ event will trigger this interrupt*/
uint32_t timer0_tep_int_st: 1; /*A PWM timer 0 TEP event will trigger this interrupt*/
uint32_t timer1_tep_int_st: 1; /*A PWM timer 1 TEP event will trigger this interrupt*/
uint32_t timer2_tep_int_st: 1; /*A PWM timer 2 TEP event will trigger this interrupt*/
uint32_t fault0_int_st: 1; /*Interrupt when event_f0 starts*/
uint32_t fault1_int_st: 1; /*Interrupt when event_f1 starts*/
uint32_t fault2_int_st: 1; /*Interrupt when event_f2 starts*/
uint32_t fault0_clr_int_st: 1; /*Interrupt when event_f0 ends*/
uint32_t fault1_clr_int_st: 1; /*Interrupt when event_f1 ends*/
uint32_t fault2_clr_int_st: 1; /*Interrupt when event_f2 ends*/
uint32_t cmpr0_tea_int_st: 1; /*A PWM operator 0 TEA event will trigger this interrupt*/
uint32_t cmpr1_tea_int_st: 1; /*A PWM operator 1 TEA event will trigger this interrupt*/
uint32_t cmpr2_tea_int_st: 1; /*A PWM operator 2 TEA event will trigger this interrupt*/
uint32_t cmpr0_teb_int_st: 1; /*A PWM operator 0 TEB event will trigger this interrupt*/
uint32_t cmpr1_teb_int_st: 1; /*A PWM operator 1 TEB event will trigger this interrupt*/
uint32_t cmpr2_teb_int_st: 1; /*A PWM operator 2 TEB event will trigger this interrupt*/
uint32_t tz0_cbc_int_st: 1; /*An cycle-by-cycle trip event on PWM0 will trigger this interrupt*/
uint32_t tz1_cbc_int_st: 1; /*An cycle-by-cycle trip event on PWM1 will trigger this interrupt*/
uint32_t tz2_cbc_int_st: 1; /*An cycle-by-cycle trip event on PWM2 will trigger this interrupt*/
uint32_t tz0_ost_int_st: 1; /*An one-shot trip event on PWM0 will trigger this interrupt*/
uint32_t tz1_ost_int_st: 1; /*An one-shot trip event on PWM1 will trigger this interrupt*/
uint32_t tz2_ost_int_st: 1; /*An one-shot trip event on PWM2 will trigger this interrupt*/
uint32_t cap0_int_st: 1; /*A capture on channel 0 will trigger this interrupt*/
uint32_t cap1_int_st: 1; /*A capture on channel 1 will trigger this interrupt*/
uint32_t cap2_int_st: 1; /*A capture on channel 2 will trigger this interrupt*/
uint32_t reserved30: 2;
};
uint32_t val;
}int_st;
union {
struct {
uint32_t timer0_stop_int_clr: 1; /*Interrupt when timer 0 stops*/
uint32_t timer1_stop_int_clr: 1; /*Interrupt when timer 1 stops*/
uint32_t timer2_stop_int_clr: 1; /*Interrupt when timer 2 stops*/
uint32_t timer0_tez_int_clr: 1; /*A PWM timer 0 TEZ event will trigger this interrupt*/
uint32_t timer1_tez_int_clr: 1; /*A PWM timer 1 TEZ event will trigger this interrupt*/
uint32_t timer2_tez_int_clr: 1; /*A PWM timer 2 TEZ event will trigger this interrupt*/
uint32_t timer0_tep_int_clr: 1; /*A PWM timer 0 TEP event will trigger this interrupt*/
uint32_t timer1_tep_int_clr: 1; /*A PWM timer 1 TEP event will trigger this interrupt*/
uint32_t timer2_tep_int_clr: 1; /*A PWM timer 2 TEP event will trigger this interrupt*/
uint32_t fault0_int_clr: 1; /*Interrupt when event_f0 starts*/
uint32_t fault1_int_clr: 1; /*Interrupt when event_f1 starts*/
uint32_t fault2_int_clr: 1; /*Interrupt when event_f2 starts*/
uint32_t fault0_clr_int_clr: 1; /*Interrupt when event_f0 ends*/
uint32_t fault1_clr_int_clr: 1; /*Interrupt when event_f1 ends*/
uint32_t fault2_clr_int_clr: 1; /*Interrupt when event_f2 ends*/
uint32_t cmpr0_tea_int_clr: 1; /*A PWM operator 0 TEA event will trigger this interrupt*/
uint32_t cmpr1_tea_int_clr: 1; /*A PWM operator 1 TEA event will trigger this interrupt*/
uint32_t cmpr2_tea_int_clr: 1; /*A PWM operator 2 TEA event will trigger this interrupt*/
uint32_t cmpr0_teb_int_clr: 1; /*A PWM operator 0 TEB event will trigger this interrupt*/
uint32_t cmpr1_teb_int_clr: 1; /*A PWM operator 1 TEB event will trigger this interrupt*/
uint32_t cmpr2_teb_int_clr: 1; /*A PWM operator 2 TEB event will trigger this interrupt*/
uint32_t tz0_cbc_int_clr: 1; /*An cycle-by-cycle trip event on PWM0 will trigger this interrupt*/
uint32_t tz1_cbc_int_clr: 1; /*An cycle-by-cycle trip event on PWM1 will trigger this interrupt*/
uint32_t tz2_cbc_int_clr: 1; /*An cycle-by-cycle trip event on PWM2 will trigger this interrupt*/
uint32_t tz0_ost_int_clr: 1; /*An one-shot trip event on PWM0 will trigger this interrupt*/
uint32_t tz1_ost_int_clr: 1; /*An one-shot trip event on PWM1 will trigger this interrupt*/
uint32_t tz2_ost_int_clr: 1; /*An one-shot trip event on PWM2 will trigger this interrupt*/
uint32_t cap0_int_clr: 1; /*A capture on channel 0 will trigger this interrupt*/
uint32_t cap1_int_clr: 1; /*A capture on channel 1 will trigger this interrupt*/
uint32_t cap2_int_clr: 1; /*A capture on channel 2 will trigger this interrupt*/
uint32_t reserved30: 2;
};
uint32_t val;
}int_clr;
union {
struct {
uint32_t clk_en: 1; /*Force clock on for this reg file*/
uint32_t reserved1: 31;
};
uint32_t val;
}reg_clk;
union {
struct {
uint32_t date: 28; /*Version of this reg file*/
uint32_t reserved28: 4;
};
uint32_t val;
}version;
} mcpwm_dev_t;
extern mcpwm_dev_t MCPWM0;
extern mcpwm_dev_t MCPWM1;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_MCPWM_STRUCT_H__ */

21
tools/sdk/esp32/include/soc/soc/esp32/include/soc/mpu_caps.h Normal file
View File

@ -0,0 +1,21 @@
// Copyright 2020 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#define SOC_MPU_CONFIGURABLE_REGIONS_SUPPORTED 0
#define SOC_MPU_MIN_REGION_SIZE 0x20000000
#define SOC_MPU_REGIONS_MAX_NUM 8
#define SOC_MPU_REGION_RO_SUPPORTED 0
#define SOC_MPU_REGION_WO_SUPPORTED 0

55
tools/sdk/esp32/include/soc/soc/esp32/include/soc/nrx_reg.h Normal file
View File

@ -0,0 +1,55 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "soc/soc.h"
/* Some of the WiFi RX control registers.
* PU/PD fields defined here are used in sleep related functions.
*/
#define NRXPD_CTRL (DR_REG_NRX_BASE + 0x00d4)
#define NRX_CHAN_EST_FORCE_PU (BIT(7))
#define NRX_CHAN_EST_FORCE_PU_M (BIT(7))
#define NRX_CHAN_EST_FORCE_PU_V 1
#define NRX_CHAN_EST_FORCE_PU_S 7
#define NRX_CHAN_EST_FORCE_PD (BIT(6))
#define NRX_CHAN_EST_FORCE_PD_M (BIT(6))
#define NRX_CHAN_EST_FORCE_PD_V 1
#define NRX_CHAN_EST_FORCE_PD_S 6
#define NRX_RX_ROT_FORCE_PU (BIT(5))
#define NRX_RX_ROT_FORCE_PU_M (BIT(5))
#define NRX_RX_ROT_FORCE_PU_V 1
#define NRX_RX_ROT_FORCE_PU_S 5
#define NRX_RX_ROT_FORCE_PD (BIT(4))
#define NRX_RX_ROT_FORCE_PD_M (BIT(4))
#define NRX_RX_ROT_FORCE_PD_V 1
#define NRX_RX_ROT_FORCE_PD_S 4
#define NRX_VIT_FORCE_PU (BIT(3))
#define NRX_VIT_FORCE_PU_M (BIT(3))
#define NRX_VIT_FORCE_PU_V 1
#define NRX_VIT_FORCE_PU_S 3
#define NRX_VIT_FORCE_PD (BIT(2))
#define NRX_VIT_FORCE_PD_M (BIT(2))
#define NRX_VIT_FORCE_PD_V 1
#define NRX_VIT_FORCE_PD_S 2
#define NRX_DEMAP_FORCE_PU (BIT(1))
#define NRX_DEMAP_FORCE_PU_M (BIT(1))
#define NRX_DEMAP_FORCE_PU_V 1
#define NRX_DEMAP_FORCE_PU_S 1
#define NRX_DEMAP_FORCE_PD (BIT(0))
#define NRX_DEMAP_FORCE_PD_M (BIT(0))
#define NRX_DEMAP_FORCE_PD_V 1
#define NRX_DEMAP_FORCE_PD_S 0

27
tools/sdk/esp32/include/soc/soc/esp32/include/soc/pcnt_caps.h Normal file
View File

@ -0,0 +1,27 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
// ESP32 have 1 PCNT peripheral
#define SOC_PCNT_PORT_NUM (1)
#define SOC_PCNT_UNIT_NUM (8)
#ifdef __cplusplus
}
#endif

1526
tools/sdk/esp32/include/soc/soc/esp32/include/soc/pcnt_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

184
tools/sdk/esp32/include/soc/soc/esp32/include/soc/pcnt_struct.h Normal file
View File

@ -0,0 +1,184 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_PCNT_STRUCT_H_
#define _SOC_PCNT_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct pcnt_dev_s {
struct{
union {
struct {
uint32_t filter_thres: 10; /*This register is used to filter pulse whose width is smaller than this value for unit0.*/
uint32_t filter_en: 1; /*This is the enable bit for filtering input signals for unit0.*/
uint32_t thr_zero_en: 1; /*This is the enable bit for comparing unit0's count with 0 value.*/
uint32_t thr_h_lim_en: 1; /*This is the enable bit for comparing unit0's count with thr_h_lim value.*/
uint32_t thr_l_lim_en: 1; /*This is the enable bit for comparing unit0's count with thr_l_lim value.*/
uint32_t thr_thres0_en: 1; /*This is the enable bit for comparing unit0's count with thres0 value.*/
uint32_t thr_thres1_en: 1; /*This is the enable bit for comparing unit0's count with thres1 value .*/
uint32_t ch0_neg_mode: 2; /*This register is used to control the mode of channel0's input neg-edge signal for unit0. 2'd1：increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
uint32_t ch0_pos_mode: 2; /*This register is used to control the mode of channel0's input pos-edge signal for unit0. 2'd1：increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
uint32_t ch0_hctrl_mode: 2; /*This register is used to control the mode of channel0's high control signal for unit0. 2'd0:increase when control signal is low 2'd1：decrease when control signal is high others:forbidden*/
uint32_t ch0_lctrl_mode: 2; /*This register is used to control the mode of channel0's low control signal for unit0. 2'd0:increase when control signal is low 2'd1：decrease when control signal is high others:forbidden*/
uint32_t ch1_neg_mode: 2; /*This register is used to control the mode of channel1's input neg-edge signal for unit0. 2'd1：increase at the negedge of input signal 2'd2:decrease at the negedge of input signal others:forbidden*/
uint32_t ch1_pos_mode: 2; /*This register is used to control the mode of channel1's input pos-edge signal for unit0. 2'd1：increase at the posedge of input signal 2'd2:decrease at the posedge of input signal others:forbidden*/
uint32_t ch1_hctrl_mode: 2; /*This register is used to control the mode of channel1's high control signal for unit0. 2'd0:increase when control signal is low 2'd1：decrease when control signal is high others:forbidden*/
uint32_t ch1_lctrl_mode: 2; /*This register is used to control the mode of channel1's low control signal for unit0. 2'd0:increase when control signal is low 2'd1：decrease when control signal is high others:forbidden*/
};
uint32_t val;
} conf0;
union {
struct {
uint32_t cnt_thres0:16; /*This register is used to configure thres0 value for unit0.*/
uint32_t cnt_thres1:16; /*This register is used to configure thres1 value for unit0.*/
};
uint32_t val;
} conf1;
union {
struct {
uint32_t cnt_h_lim:16; /*This register is used to configure thr_h_lim value for unit0.*/
uint32_t cnt_l_lim:16; /*This register is used to configure thr_l_lim value for unit0.*/
};
uint32_t val;
} conf2;
} conf_unit[8];
union {
struct {
uint32_t cnt_val : 16; /*This register stores the current pulse count value for unit0.*/
uint32_t reserved16: 16;
};
uint32_t val;
} cnt_unit[8];
union {
struct {
uint32_t cnt_thr_event_u0: 1; /*This is the interrupt raw bit for channel0 event.*/
uint32_t cnt_thr_event_u1: 1; /*This is the interrupt raw bit for channel1 event.*/
uint32_t cnt_thr_event_u2: 1; /*This is the interrupt raw bit for channel2 event.*/
uint32_t cnt_thr_event_u3: 1; /*This is the interrupt raw bit for channel3 event.*/
uint32_t cnt_thr_event_u4: 1; /*This is the interrupt raw bit for channel4 event.*/
uint32_t cnt_thr_event_u5: 1; /*This is the interrupt raw bit for channel5 event.*/
uint32_t cnt_thr_event_u6: 1; /*This is the interrupt raw bit for channel6 event.*/
uint32_t cnt_thr_event_u7: 1; /*This is the interrupt raw bit for channel7 event.*/
uint32_t reserved8: 24;
};
uint32_t val;
} int_raw;
union {
struct {
uint32_t cnt_thr_event_u0: 1; /*This is the interrupt status bit for channel0 event.*/
uint32_t cnt_thr_event_u1: 1; /*This is the interrupt status bit for channel1 event.*/
uint32_t cnt_thr_event_u2: 1; /*This is the interrupt status bit for channel2 event.*/
uint32_t cnt_thr_event_u3: 1; /*This is the interrupt status bit for channel3 event.*/
uint32_t cnt_thr_event_u4: 1; /*This is the interrupt status bit for channel4 event.*/
uint32_t cnt_thr_event_u5: 1; /*This is the interrupt status bit for channel5 event.*/
uint32_t cnt_thr_event_u6: 1; /*This is the interrupt status bit for channel6 event.*/
uint32_t cnt_thr_event_u7: 1; /*This is the interrupt status bit for channel7 event.*/
uint32_t reserved8: 24;
};
uint32_t val;
} int_st;
union {
struct {
uint32_t cnt_thr_event_u0: 1; /*This is the interrupt enable bit for channel0 event.*/
uint32_t cnt_thr_event_u1: 1; /*This is the interrupt enable bit for channel1 event.*/
uint32_t cnt_thr_event_u2: 1; /*This is the interrupt enable bit for channel2 event.*/
uint32_t cnt_thr_event_u3: 1; /*This is the interrupt enable bit for channel3 event.*/
uint32_t cnt_thr_event_u4: 1; /*This is the interrupt enable bit for channel4 event.*/
uint32_t cnt_thr_event_u5: 1; /*This is the interrupt enable bit for channel5 event.*/
uint32_t cnt_thr_event_u6: 1; /*This is the interrupt enable bit for channel6 event.*/
uint32_t cnt_thr_event_u7: 1; /*This is the interrupt enable bit for channel7 event.*/
uint32_t reserved8: 24;
};
uint32_t val;
} int_ena;
union {
struct {
uint32_t cnt_thr_event_u0: 1; /*Set this bit to clear channel0 event interrupt.*/
uint32_t cnt_thr_event_u1: 1; /*Set this bit to clear channel1 event interrupt.*/
uint32_t cnt_thr_event_u2: 1; /*Set this bit to clear channel2 event interrupt.*/
uint32_t cnt_thr_event_u3: 1; /*Set this bit to clear channel3 event interrupt.*/
uint32_t cnt_thr_event_u4: 1; /*Set this bit to clear channel4 event interrupt.*/
uint32_t cnt_thr_event_u5: 1; /*Set this bit to clear channel5 event interrupt.*/
uint32_t cnt_thr_event_u6: 1; /*Set this bit to clear channel6 event interrupt.*/
uint32_t cnt_thr_event_u7: 1; /*Set this bit to clear channel7 event interrupt.*/
uint32_t reserved8: 24;
};
uint32_t val;
} int_clr;
union {
struct {
uint32_t cnt_mode:2; /*0: positive value to zero; 1: negative value to zero; 2: counter value negative ; 3: counter value positive*/
uint32_t thres1_lat:1; /* counter value equals to thresh1*/
uint32_t thres0_lat:1; /* counter value equals to thresh0*/
uint32_t l_lim_lat:1; /* counter value reaches h_lim*/
uint32_t h_lim_lat:1; /* counter value reaches l_lim*/
uint32_t zero_lat:1; /* counter value equals zero*/
uint32_t reserved7:25;
};
uint32_t val;
} status_unit[8];
union {
struct {
uint32_t cnt_rst_u0: 1; /*Set this bit to clear unit0's counter.*/
uint32_t cnt_pause_u0: 1; /*Set this bit to pause unit0's counter.*/
uint32_t cnt_rst_u1: 1; /*Set this bit to clear unit1's counter.*/
uint32_t cnt_pause_u1: 1; /*Set this bit to pause unit1's counter.*/
uint32_t cnt_rst_u2: 1; /*Set this bit to clear unit2's counter.*/
uint32_t cnt_pause_u2: 1; /*Set this bit to pause unit2's counter.*/
uint32_t cnt_rst_u3: 1; /*Set this bit to clear unit3's counter.*/
uint32_t cnt_pause_u3: 1; /*Set this bit to pause unit3's counter.*/
uint32_t cnt_rst_u4: 1; /*Set this bit to clear unit4's counter.*/
uint32_t cnt_pause_u4: 1; /*Set this bit to pause unit4's counter.*/
uint32_t cnt_rst_u5: 1; /*Set this bit to clear unit5's counter.*/
uint32_t cnt_pause_u5: 1; /*Set this bit to pause unit5's counter.*/
uint32_t cnt_rst_u6: 1; /*Set this bit to clear unit6's counter.*/
uint32_t cnt_pause_u6: 1; /*Set this bit to pause unit6's counter.*/
uint32_t cnt_rst_u7: 1; /*Set this bit to clear unit7's counter.*/
uint32_t cnt_pause_u7: 1; /*Set this bit to pause unit7's counter.*/
uint32_t clk_en: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} ctrl;
uint32_t reserved_b4;
uint32_t reserved_b8;
uint32_t reserved_bc;
uint32_t reserved_c0;
uint32_t reserved_c4;
uint32_t reserved_c8;
uint32_t reserved_cc;
uint32_t reserved_d0;
uint32_t reserved_d4;
uint32_t reserved_d8;
uint32_t reserved_dc;
uint32_t reserved_e0;
uint32_t reserved_e4;
uint32_t reserved_e8;
uint32_t reserved_ec;
uint32_t reserved_f0;
uint32_t reserved_f4;
uint32_t reserved_f8;
uint32_t date; /**/
} pcnt_dev_t;
extern pcnt_dev_t PCNT;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_PCNT_STRUCT_H_ */

65
tools/sdk/esp32/include/soc/soc/esp32/include/soc/periph_defs.h Normal file
View File

@ -0,0 +1,65 @@
// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_PERIPH_DEFS_H_
#define _SOC_PERIPH_DEFS_H_
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
PERIPH_LEDC_MODULE = 0,
PERIPH_UART0_MODULE,
PERIPH_UART1_MODULE,
PERIPH_UART2_MODULE,
PERIPH_I2C0_MODULE,
PERIPH_I2C1_MODULE,
PERIPH_I2S0_MODULE,
PERIPH_I2S1_MODULE,
PERIPH_TIMG0_MODULE,
PERIPH_TIMG1_MODULE,
PERIPH_PWM0_MODULE,
PERIPH_PWM1_MODULE,
PERIPH_PWM2_MODULE,
PERIPH_PWM3_MODULE,
PERIPH_UHCI0_MODULE,
PERIPH_UHCI1_MODULE,
PERIPH_RMT_MODULE,
PERIPH_PCNT_MODULE,
PERIPH_SPI_MODULE,
PERIPH_HSPI_MODULE,
PERIPH_VSPI_MODULE,
PERIPH_SPI_DMA_MODULE,
PERIPH_SDMMC_MODULE,
PERIPH_SDIO_SLAVE_MODULE,
PERIPH_CAN_MODULE,
PERIPH_EMAC_MODULE,
PERIPH_RNG_MODULE,
PERIPH_WIFI_MODULE,
PERIPH_BT_MODULE,
PERIPH_WIFI_BT_COMMON_MODULE,
PERIPH_BT_BASEBAND_MODULE,
PERIPH_BT_LC_MODULE,
PERIPH_AES_MODULE,
PERIPH_SHA_MODULE,
PERIPH_RSA_MODULE,
PERIPH_MODULE_MAX
} periph_module_t;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_PERIPH_DEFS_H_ */

65
tools/sdk/esp32/include/soc/soc/esp32/include/soc/pid.h Normal file
View File

@ -0,0 +1,65 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_PID_H_
#define _SOC_PID_H_
#define PROPID_GEN_BASE 0x3FF1F000
//Bits 1..7: 1 if interrupt will be triggering PID change
#define PROPID_CONFIG_INTERRUPT_ENABLE ((PROPID_GEN_BASE)+0x000)
//Vectors for the various interrupt handlers
#define PROPID_CONFIG_INTERRUPT_ADDR_1 ((PROPID_GEN_BASE)+0x004)
#define PROPID_CONFIG_INTERRUPT_ADDR_2 ((PROPID_GEN_BASE)+0x008)
#define PROPID_CONFIG_INTERRUPT_ADDR_3 ((PROPID_GEN_BASE)+0x00C)
#define PROPID_CONFIG_INTERRUPT_ADDR_4 ((PROPID_GEN_BASE)+0x010)
#define PROPID_CONFIG_INTERRUPT_ADDR_5 ((PROPID_GEN_BASE)+0x014)
#define PROPID_CONFIG_INTERRUPT_ADDR_6 ((PROPID_GEN_BASE)+0x018)
#define PROPID_CONFIG_INTERRUPT_ADDR_7 ((PROPID_GEN_BASE)+0x01C)
//Delay, in CPU cycles, before switching to new PID
#define PROPID_CONFIG_PID_DELAY ((PROPID_GEN_BASE)+0x020)
#define PROPID_CONFIG_NMI_DELAY ((PROPID_GEN_BASE)+0x024)
//Last detected interrupt. Set by hw on int.
#define PROPID_TABLE_LEVEL ((PROPID_GEN_BASE)+0x028)
//PID/prev int data for each int
#define PROPID_FROM_1 ((PROPID_GEN_BASE)+0x02C)
#define PROPID_FROM_2 ((PROPID_GEN_BASE)+0x030)
#define PROPID_FROM_3 ((PROPID_GEN_BASE)+0x034)
#define PROPID_FROM_4 ((PROPID_GEN_BASE)+0x038)
#define PROPID_FROM_5 ((PROPID_GEN_BASE)+0x03C)
#define PROPID_FROM_6 ((PROPID_GEN_BASE)+0x040)
#define PROPID_FROM_7 ((PROPID_GEN_BASE)+0x044)
#define PROPID_FROM_PID_MASK 0x7
#define PROPID_FROM_PID_S 0
#define PROPID_FROM_INT_MASK 0xF
#define PROPID_FROM_INT_S 3
//PID to be set after confirm routine
#define PROPID_PID_NEW ((PROPID_GEN_BASE)+0x048)
//Write to kick off PID change
#define PROPID_PID_CONFIRM ((PROPID_GEN_BASE)+0x04c)
//current PID?
#define PROPID_PID_REG ((PROPID_GEN_BASE)+0x050)
//Write to mask NMI
#define PROPID_PID_NMI_MASK_HW_ENABLE ((PROPID_GEN_BASE)+0x054)
//Write to unmask NMI
#define PROPID_PID_NMI_MASK_HW_DISABLE ((PROPID_GEN_BASE)+0x058)
#define PROPID_PID_NMI_MASK_HW_REG ((PROPID_GEN_BASE)+0x05c)
//Debug regs
#define PROPID_PID ((PROPID_GEN_BASE)+0x060)
#define PROPID_NMI_MASK_HW ((PROPID_GEN_BASE)+0x064)
#endif /* _SOC_PID_H_ */

26
tools/sdk/esp32/include/soc/soc/esp32/include/soc/rmt_caps.h Normal file
View File

@ -0,0 +1,26 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#define SOC_RMT_CHANNEL_MEM_WORDS (64) /*!< Each channel owns 64 words memory */
#define SOC_RMT_CHANNELS_NUM (8) /*!< Total 8 channels */
#ifdef __cplusplus
}
#endif

2604
tools/sdk/esp32/include/soc/soc/esp32/include/soc/rmt_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

264
tools/sdk/esp32/include/soc/soc/esp32/include/soc/rmt_struct.h Normal file
View File

@ -0,0 +1,264 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_RMT_STRUCT_H_
#define _SOC_RMT_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct rmt_dev_s {
uint32_t data_ch[8]; /*The R/W ram address for channel0-7 by apb fifo access.
Note that in some circumstances, data read from the FIFO may get lost. As RMT memory area accesses using the RMTMEM method do not have this issue
and provide all the functionality that the FIFO register has, it is encouraged to use that instead.*/
struct{
union {
struct {
uint32_t div_cnt: 8; /*This register is used to configure the frequency divider's factor in channel0-7.*/
uint32_t idle_thres: 16; /*In receive mode when no edge is detected on the input signal for longer than reg_idle_thres_ch0 then the receive process is done.*/
uint32_t mem_size: 4; /*This register is used to configure the the amount of memory blocks allocated to channel0-7.*/
uint32_t carrier_en: 1; /*This is the carrier modulation enable control bit for channel0-7.*/
uint32_t carrier_out_lv: 1; /*This bit is used to configure the way carrier wave is modulated for channel0-7.1'b1:transmit on low output level 1'b0:transmit on high output level.*/
uint32_t mem_pd: 1; /*This bit is used to reduce power consumed by memory. 1:memory is in low power state.*/
uint32_t clk_en: 1; /*This bit is used to control clock.when software configure RMT internal registers it controls the register clock.*/
};
uint32_t val;
} conf0;
union {
struct {
uint32_t tx_start: 1; /*Set this bit to start sending data for channel0-7.*/
uint32_t rx_en: 1; /*Set this bit to enable receiving data for channel0-7.*/
uint32_t mem_wr_rst: 1; /*Set this bit to reset write ram address for channel0-7 by receiver access.*/
uint32_t mem_rd_rst: 1; /*Set this bit to reset read ram address for channel0-7 by transmitter access.*/
uint32_t apb_mem_rst: 1; /*Set this bit to reset W/R ram address for channel0-7 by apb fifo access (using fifo is discouraged, please see the note above at data_ch[] item)*/
uint32_t mem_owner: 1; /*This is the mark of channel0-7's ram usage right.1'b1：receiver uses the ram 0：transmitter uses the ram*/
uint32_t tx_conti_mode: 1; /*Set this bit to continue sending from the first data to the last data in channel0-7 again and again.*/
uint32_t rx_filter_en: 1; /*This is the receive filter enable bit for channel0-7.*/
uint32_t rx_filter_thres: 8; /*in receive mode channel0-7 ignore input pulse when the pulse width is smaller then this value.*/
uint32_t ref_cnt_rst: 1; /*This bit is used to reset divider in channel0-7.*/
uint32_t ref_always_on: 1; /*This bit is used to select base clock. 1'b1:clk_apb 1'b0:clk_ref*/
uint32_t idle_out_lv: 1; /*This bit configures the output signal's level for channel0-7 in IDLE state.*/
uint32_t idle_out_en: 1; /*This is the output enable control bit for channel0-7 in IDLE state.*/
uint32_t reserved20: 12;
};
uint32_t val;
} conf1;
} conf_ch[8];
uint32_t status_ch[8]; /*The status for channel0-7*/
uint32_t apb_mem_addr_ch[8]; /*The ram relative address in channel0-7 by apb fifo access (using fifo is discouraged, please see the note above at data_ch[] item)*/
union {
struct {
uint32_t ch0_tx_end: 1; /*The interrupt raw bit for channel 0 turns to high level when the transmit process is done.*/
uint32_t ch0_rx_end: 1; /*The interrupt raw bit for channel 0 turns to high level when the receive process is done.*/
uint32_t ch0_err: 1; /*The interrupt raw bit for channel 0 turns to high level when channel 0 detects some errors.*/
uint32_t ch1_tx_end: 1; /*The interrupt raw bit for channel 1 turns to high level when the transmit process is done.*/
uint32_t ch1_rx_end: 1; /*The interrupt raw bit for channel 1 turns to high level when the receive process is done.*/
uint32_t ch1_err: 1; /*The interrupt raw bit for channel 1 turns to high level when channel 1 detects some errors.*/
uint32_t ch2_tx_end: 1; /*The interrupt raw bit for channel 2 turns to high level when the transmit process is done.*/
uint32_t ch2_rx_end: 1; /*The interrupt raw bit for channel 2 turns to high level when the receive process is done.*/
uint32_t ch2_err: 1; /*The interrupt raw bit for channel 2 turns to high level when channel 2 detects some errors.*/
uint32_t ch3_tx_end: 1; /*The interrupt raw bit for channel 3 turns to high level when the transmit process is done.*/
uint32_t ch3_rx_end: 1; /*The interrupt raw bit for channel 3 turns to high level when the receive process is done.*/
uint32_t ch3_err: 1; /*The interrupt raw bit for channel 3 turns to high level when channel 3 detects some errors.*/
uint32_t ch4_tx_end: 1; /*The interrupt raw bit for channel 4 turns to high level when the transmit process is done.*/
uint32_t ch4_rx_end: 1; /*The interrupt raw bit for channel 4 turns to high level when the receive process is done.*/
uint32_t ch4_err: 1; /*The interrupt raw bit for channel 4 turns to high level when channel 4 detects some errors.*/
uint32_t ch5_tx_end: 1; /*The interrupt raw bit for channel 5 turns to high level when the transmit process is done.*/
uint32_t ch5_rx_end: 1; /*The interrupt raw bit for channel 5 turns to high level when the receive process is done.*/
uint32_t ch5_err: 1; /*The interrupt raw bit for channel 5 turns to high level when channel 5 detects some errors.*/
uint32_t ch6_tx_end: 1; /*The interrupt raw bit for channel 6 turns to high level when the transmit process is done.*/
uint32_t ch6_rx_end: 1; /*The interrupt raw bit for channel 6 turns to high level when the receive process is done.*/
uint32_t ch6_err: 1; /*The interrupt raw bit for channel 6 turns to high level when channel 6 detects some errors.*/
uint32_t ch7_tx_end: 1; /*The interrupt raw bit for channel 7 turns to high level when the transmit process is done.*/
uint32_t ch7_rx_end: 1; /*The interrupt raw bit for channel 7 turns to high level when the receive process is done.*/
uint32_t ch7_err: 1; /*The interrupt raw bit for channel 7 turns to high level when channel 7 detects some errors.*/
uint32_t ch0_tx_thr_event: 1; /*The interrupt raw bit for channel 0 turns to high level when transmitter in channel0 have send data more than reg_rmt_tx_lim_ch0 after detecting this interrupt software can updata the old data with new data.*/
uint32_t ch1_tx_thr_event: 1; /*The interrupt raw bit for channel 1 turns to high level when transmitter in channel1 have send data more than reg_rmt_tx_lim_ch1 after detecting this interrupt software can updata the old data with new data.*/
uint32_t ch2_tx_thr_event: 1; /*The interrupt raw bit for channel 2 turns to high level when transmitter in channel2 have send data more than reg_rmt_tx_lim_ch2 after detecting this interrupt software can updata the old data with new data.*/
uint32_t ch3_tx_thr_event: 1; /*The interrupt raw bit for channel 3 turns to high level when transmitter in channel3 have send data more than reg_rmt_tx_lim_ch3 after detecting this interrupt software can updata the old data with new data.*/
uint32_t ch4_tx_thr_event: 1; /*The interrupt raw bit for channel 4 turns to high level when transmitter in channel4 have send data more than reg_rmt_tx_lim_ch4 after detecting this interrupt software can updata the old data with new data.*/
uint32_t ch5_tx_thr_event: 1; /*The interrupt raw bit for channel 5 turns to high level when transmitter in channel5 have send data more than reg_rmt_tx_lim_ch5 after detecting this interrupt software can updata the old data with new data.*/
uint32_t ch6_tx_thr_event: 1; /*The interrupt raw bit for channel 6 turns to high level when transmitter in channel6 have send data more than reg_rmt_tx_lim_ch6 after detecting this interrupt software can updata the old data with new data.*/
uint32_t ch7_tx_thr_event: 1; /*The interrupt raw bit for channel 7 turns to high level when transmitter in channel7 have send data more than reg_rmt_tx_lim_ch7 after detecting this interrupt software can updata the old data with new data.*/
};
uint32_t val;
} int_raw;
union {
struct {
uint32_t ch0_tx_end: 1; /*The interrupt state bit for channel 0's mt_ch0_tx_end_int_raw when mt_ch0_tx_end_int_ena is set to 0.*/
uint32_t ch0_rx_end: 1; /*The interrupt state bit for channel 0's rmt_ch0_rx_end_int_raw when rmt_ch0_rx_end_int_ena is set to 0.*/
uint32_t ch0_err: 1; /*The interrupt state bit for channel 0's rmt_ch0_err_int_raw when rmt_ch0_err_int_ena is set to 0.*/
uint32_t ch1_tx_end: 1; /*The interrupt state bit for channel 1's mt_ch1_tx_end_int_raw when mt_ch1_tx_end_int_ena is set to 1.*/
uint32_t ch1_rx_end: 1; /*The interrupt state bit for channel 1's rmt_ch1_rx_end_int_raw when rmt_ch1_rx_end_int_ena is set to 1.*/
uint32_t ch1_err: 1; /*The interrupt state bit for channel 1's rmt_ch1_err_int_raw when rmt_ch1_err_int_ena is set to 1.*/
uint32_t ch2_tx_end: 1; /*The interrupt state bit for channel 2's mt_ch2_tx_end_int_raw when mt_ch2_tx_end_int_ena is set to 1.*/
uint32_t ch2_rx_end: 1; /*The interrupt state bit for channel 2's rmt_ch2_rx_end_int_raw when rmt_ch2_rx_end_int_ena is set to 1.*/
uint32_t ch2_err: 1; /*The interrupt state bit for channel 2's rmt_ch2_err_int_raw when rmt_ch2_err_int_ena is set to 1.*/
uint32_t ch3_tx_end: 1; /*The interrupt state bit for channel 3's mt_ch3_tx_end_int_raw when mt_ch3_tx_end_int_ena is set to 1.*/
uint32_t ch3_rx_end: 1; /*The interrupt state bit for channel 3's rmt_ch3_rx_end_int_raw when rmt_ch3_rx_end_int_ena is set to 1.*/
uint32_t ch3_err: 1; /*The interrupt state bit for channel 3's rmt_ch3_err_int_raw when rmt_ch3_err_int_ena is set to 1.*/
uint32_t ch4_tx_end: 1; /*The interrupt state bit for channel 4's mt_ch4_tx_end_int_raw when mt_ch4_tx_end_int_ena is set to 1.*/
uint32_t ch4_rx_end: 1; /*The interrupt state bit for channel 4's rmt_ch4_rx_end_int_raw when rmt_ch4_rx_end_int_ena is set to 1.*/
uint32_t ch4_err: 1; /*The interrupt state bit for channel 4's rmt_ch4_err_int_raw when rmt_ch4_err_int_ena is set to 1.*/
uint32_t ch5_tx_end: 1; /*The interrupt state bit for channel 5's mt_ch5_tx_end_int_raw when mt_ch5_tx_end_int_ena is set to 1.*/
uint32_t ch5_rx_end: 1; /*The interrupt state bit for channel 5's rmt_ch5_rx_end_int_raw when rmt_ch5_rx_end_int_ena is set to 1.*/
uint32_t ch5_err: 1; /*The interrupt state bit for channel 5's rmt_ch5_err_int_raw when rmt_ch5_err_int_ena is set to 1.*/
uint32_t ch6_tx_end: 1; /*The interrupt state bit for channel 6's mt_ch6_tx_end_int_raw when mt_ch6_tx_end_int_ena is set to 1.*/
uint32_t ch6_rx_end: 1; /*The interrupt state bit for channel 6's rmt_ch6_rx_end_int_raw when rmt_ch6_rx_end_int_ena is set to 1.*/
uint32_t ch6_err: 1; /*The interrupt state bit for channel 6's rmt_ch6_err_int_raw when rmt_ch6_err_int_ena is set to 1.*/
uint32_t ch7_tx_end: 1; /*The interrupt state bit for channel 7's mt_ch7_tx_end_int_raw when mt_ch7_tx_end_int_ena is set to 1.*/
uint32_t ch7_rx_end: 1; /*The interrupt state bit for channel 7's rmt_ch7_rx_end_int_raw when rmt_ch7_rx_end_int_ena is set to 1.*/
uint32_t ch7_err: 1; /*The interrupt state bit for channel 7's rmt_ch7_err_int_raw when rmt_ch7_err_int_ena is set to 1.*/
uint32_t ch0_tx_thr_event: 1; /*The interrupt state bit for channel 0's rmt_ch0_tx_thr_event_int_raw when mt_ch0_tx_thr_event_int_ena is set to 1.*/
uint32_t ch1_tx_thr_event: 1; /*The interrupt state bit for channel 1's rmt_ch1_tx_thr_event_int_raw when mt_ch1_tx_thr_event_int_ena is set to 1.*/
uint32_t ch2_tx_thr_event: 1; /*The interrupt state bit for channel 2's rmt_ch2_tx_thr_event_int_raw when mt_ch2_tx_thr_event_int_ena is set to 1.*/
uint32_t ch3_tx_thr_event: 1; /*The interrupt state bit for channel 3's rmt_ch3_tx_thr_event_int_raw when mt_ch3_tx_thr_event_int_ena is set to 1.*/
uint32_t ch4_tx_thr_event: 1; /*The interrupt state bit for channel 4's rmt_ch4_tx_thr_event_int_raw when mt_ch4_tx_thr_event_int_ena is set to 1.*/
uint32_t ch5_tx_thr_event: 1; /*The interrupt state bit for channel 5's rmt_ch5_tx_thr_event_int_raw when mt_ch5_tx_thr_event_int_ena is set to 1.*/
uint32_t ch6_tx_thr_event: 1; /*The interrupt state bit for channel 6's rmt_ch6_tx_thr_event_int_raw when mt_ch6_tx_thr_event_int_ena is set to 1.*/
uint32_t ch7_tx_thr_event: 1; /*The interrupt state bit for channel 7's rmt_ch7_tx_thr_event_int_raw when mt_ch7_tx_thr_event_int_ena is set to 1.*/
};
uint32_t val;
} int_st;
union {
struct {
uint32_t ch0_tx_end: 1; /*Set this bit to enable rmt_ch0_tx_end_int_st.*/
uint32_t ch0_rx_end: 1; /*Set this bit to enable rmt_ch0_rx_end_int_st.*/
uint32_t ch0_err: 1; /*Set this bit to enable rmt_ch0_err_int_st.*/
uint32_t ch1_tx_end: 1; /*Set this bit to enable rmt_ch1_tx_end_int_st.*/
uint32_t ch1_rx_end: 1; /*Set this bit to enable rmt_ch1_rx_end_int_st.*/
uint32_t ch1_err: 1; /*Set this bit to enable rmt_ch1_err_int_st.*/
uint32_t ch2_tx_end: 1; /*Set this bit to enable rmt_ch2_tx_end_int_st.*/
uint32_t ch2_rx_end: 1; /*Set this bit to enable rmt_ch2_rx_end_int_st.*/
uint32_t ch2_err: 1; /*Set this bit to enable rmt_ch2_err_int_st.*/
uint32_t ch3_tx_end: 1; /*Set this bit to enable rmt_ch3_tx_end_int_st.*/
uint32_t ch3_rx_end: 1; /*Set this bit to enable rmt_ch3_rx_end_int_st.*/
uint32_t ch3_err: 1; /*Set this bit to enable rmt_ch3_err_int_st.*/
uint32_t ch4_tx_end: 1; /*Set this bit to enable rmt_ch4_tx_end_int_st.*/
uint32_t ch4_rx_end: 1; /*Set this bit to enable rmt_ch4_rx_end_int_st.*/
uint32_t ch4_err: 1; /*Set this bit to enable rmt_ch4_err_int_st.*/
uint32_t ch5_tx_end: 1; /*Set this bit to enable rmt_ch5_tx_end_int_st.*/
uint32_t ch5_rx_end: 1; /*Set this bit to enable rmt_ch5_rx_end_int_st.*/
uint32_t ch5_err: 1; /*Set this bit to enable rmt_ch5_err_int_st.*/
uint32_t ch6_tx_end: 1; /*Set this bit to enable rmt_ch6_tx_end_int_st.*/
uint32_t ch6_rx_end: 1; /*Set this bit to enable rmt_ch6_rx_end_int_st.*/
uint32_t ch6_err: 1; /*Set this bit to enable rmt_ch6_err_int_st.*/
uint32_t ch7_tx_end: 1; /*Set this bit to enable rmt_ch7_tx_end_int_st.*/
uint32_t ch7_rx_end: 1; /*Set this bit to enable rmt_ch7_rx_end_int_st.*/
uint32_t ch7_err: 1; /*Set this bit to enable rmt_ch7_err_int_st.*/
uint32_t ch0_tx_thr_event: 1; /*Set this bit to enable rmt_ch0_tx_thr_event_int_st.*/
uint32_t ch1_tx_thr_event: 1; /*Set this bit to enable rmt_ch1_tx_thr_event_int_st.*/
uint32_t ch2_tx_thr_event: 1; /*Set this bit to enable rmt_ch2_tx_thr_event_int_st.*/
uint32_t ch3_tx_thr_event: 1; /*Set this bit to enable rmt_ch3_tx_thr_event_int_st.*/
uint32_t ch4_tx_thr_event: 1; /*Set this bit to enable rmt_ch4_tx_thr_event_int_st.*/
uint32_t ch5_tx_thr_event: 1; /*Set this bit to enable rmt_ch5_tx_thr_event_int_st.*/
uint32_t ch6_tx_thr_event: 1; /*Set this bit to enable rmt_ch6_tx_thr_event_int_st.*/
uint32_t ch7_tx_thr_event: 1; /*Set this bit to enable rmt_ch7_tx_thr_event_int_st.*/
};
uint32_t val;
} int_ena;
union {
struct {
uint32_t ch0_tx_end: 1; /*Set this bit to clear the rmt_ch0_rx_end_int_raw..*/
uint32_t ch0_rx_end: 1; /*Set this bit to clear the rmt_ch0_tx_end_int_raw.*/
uint32_t ch0_err: 1; /*Set this bit to clear the rmt_ch0_err_int_raw.*/
uint32_t ch1_tx_end: 1; /*Set this bit to clear the rmt_ch1_rx_end_int_raw..*/
uint32_t ch1_rx_end: 1; /*Set this bit to clear the rmt_ch1_tx_end_int_raw.*/
uint32_t ch1_err: 1; /*Set this bit to clear the rmt_ch1_err_int_raw.*/
uint32_t ch2_tx_end: 1; /*Set this bit to clear the rmt_ch2_rx_end_int_raw..*/
uint32_t ch2_rx_end: 1; /*Set this bit to clear the rmt_ch2_tx_end_int_raw.*/
uint32_t ch2_err: 1; /*Set this bit to clear the rmt_ch2_err_int_raw.*/
uint32_t ch3_tx_end: 1; /*Set this bit to clear the rmt_ch3_rx_end_int_raw..*/
uint32_t ch3_rx_end: 1; /*Set this bit to clear the rmt_ch3_tx_end_int_raw.*/
uint32_t ch3_err: 1; /*Set this bit to clear the rmt_ch3_err_int_raw.*/
uint32_t ch4_tx_end: 1; /*Set this bit to clear the rmt_ch4_rx_end_int_raw..*/
uint32_t ch4_rx_end: 1; /*Set this bit to clear the rmt_ch4_tx_end_int_raw.*/
uint32_t ch4_err: 1; /*Set this bit to clear the rmt_ch4_err_int_raw.*/
uint32_t ch5_tx_end: 1; /*Set this bit to clear the rmt_ch5_rx_end_int_raw..*/
uint32_t ch5_rx_end: 1; /*Set this bit to clear the rmt_ch5_tx_end_int_raw.*/
uint32_t ch5_err: 1; /*Set this bit to clear the rmt_ch5_err_int_raw.*/
uint32_t ch6_tx_end: 1; /*Set this bit to clear the rmt_ch6_rx_end_int_raw..*/
uint32_t ch6_rx_end: 1; /*Set this bit to clear the rmt_ch6_tx_end_int_raw.*/
uint32_t ch6_err: 1; /*Set this bit to clear the rmt_ch6_err_int_raw.*/
uint32_t ch7_tx_end: 1; /*Set this bit to clear the rmt_ch7_rx_end_int_raw..*/
uint32_t ch7_rx_end: 1; /*Set this bit to clear the rmt_ch7_tx_end_int_raw.*/
uint32_t ch7_err: 1; /*Set this bit to clear the rmt_ch7_err_int_raw.*/
uint32_t ch0_tx_thr_event: 1; /*Set this bit to clear the rmt_ch0_tx_thr_event_int_raw interrupt.*/
uint32_t ch1_tx_thr_event: 1; /*Set this bit to clear the rmt_ch1_tx_thr_event_int_raw interrupt.*/
uint32_t ch2_tx_thr_event: 1; /*Set this bit to clear the rmt_ch2_tx_thr_event_int_raw interrupt.*/
uint32_t ch3_tx_thr_event: 1; /*Set this bit to clear the rmt_ch3_tx_thr_event_int_raw interrupt.*/
uint32_t ch4_tx_thr_event: 1; /*Set this bit to clear the rmt_ch4_tx_thr_event_int_raw interrupt.*/
uint32_t ch5_tx_thr_event: 1; /*Set this bit to clear the rmt_ch5_tx_thr_event_int_raw interrupt.*/
uint32_t ch6_tx_thr_event: 1; /*Set this bit to clear the rmt_ch6_tx_thr_event_int_raw interrupt.*/
uint32_t ch7_tx_thr_event: 1; /*Set this bit to clear the rmt_ch7_tx_thr_event_int_raw interrupt.*/
};
uint32_t val;
} int_clr;
union {
struct {
uint32_t low: 16; /*This register is used to configure carrier wave's low level value for channel0-7.*/
uint32_t high:16; /*This register is used to configure carrier wave's high level value for channel0-7.*/
};
uint32_t val;
} carrier_duty_ch[8];
union {
struct {
uint32_t limit: 9; /*When channel0-7 sends more than reg_rmt_tx_lim_ch0 data then channel0-7 produce the relative interrupt.*/
uint32_t reserved9: 23;
};
uint32_t val;
} tx_lim_ch[8];
union {
struct {
uint32_t fifo_mask: 1; /*Set this bit to enable RMTMEM and disable apb fifo access (using fifo is discouraged, please see the note above at data_ch[] item)*/
uint32_t mem_tx_wrap_en: 1; /*when data need to be send is more than channel's mem can store then set this bit to enable reuse of mem this bit is used together with reg_rmt_tx_lim_chn.*/
uint32_t reserved2: 30;
};
uint32_t val;
} apb_conf;
uint32_t reserved_f4;
uint32_t reserved_f8;
uint32_t date; /*This is the version register.*/
} rmt_dev_t;
extern rmt_dev_t RMT;
typedef struct rmt_item32_s {
union {
struct {
uint32_t duration0 :15;
uint32_t level0 :1;
uint32_t duration1 :15;
uint32_t level1 :1;
};
uint32_t val;
};
} rmt_item32_t;
//Allow access to RMT memory using RMTMEM.chan[0].data32[8]
typedef volatile struct rmt_mem_s {
struct {
union {
rmt_item32_t data32[64];
};
} chan[8];
} rmt_mem_t;
extern rmt_mem_t RMTMEM;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_RMT_STRUCT_H_ */

651
tools/sdk/esp32/include/soc/soc/esp32/include/soc/rtc.h Normal file
View File

@ -0,0 +1,651 @@
// Copyright 2015-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>
#include "soc/soc.h"
#include "soc/rtc_periph.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @file rtc.h
* @brief Low-level RTC power, clock, and sleep functions.
*
* Functions in this file facilitate configuration of ESP32's RTC_CNTL peripheral.
* RTC_CNTL peripheral handles many functions:
* - enables/disables clocks and power to various parts of the chip; this is
* done using direct register access (forcing power up or power down) or by
* allowing state machines to control power and clocks automatically
* - handles sleep and wakeup functions
* - maintains a 48-bit counter which can be used for timekeeping
*
* These functions are not thread safe, and should not be viewed as high level
* APIs. For example, while this file provides a function which can switch
* CPU frequency, this function is on its own is not sufficient to implement
* frequency switching in ESP-IDF context: some coordination with RTOS,
* peripheral drivers, and WiFi/BT stacks is also required.
*
* These functions will normally not be used in applications directly.
* ESP-IDF provides, or will provide, drivers and other facilities to use
* RTC subsystem functionality.
*
* The functions are loosely split into the following groups:
* - rtc_clk: clock switching, calibration
* - rtc_time: reading RTC counter, conversion between counter values and time
* - rtc_sleep: entry into sleep modes
* - rtc_init: initialization
*/
/**
* @brief Possible main XTAL frequency values.
*
* Enum values should be equal to frequency in MHz.
*/
typedef enum {
RTC_XTAL_FREQ_AUTO = 0, //!< Automatic XTAL frequency detection
RTC_XTAL_FREQ_40M = 40, //!< 40 MHz XTAL
RTC_XTAL_FREQ_26M = 26, //!< 26 MHz XTAL
RTC_XTAL_FREQ_24M = 24, //!< 24 MHz XTAL
} rtc_xtal_freq_t;
/**
* @brief CPU frequency values
*/
typedef enum {
RTC_CPU_FREQ_XTAL = 0, //!< Main XTAL frequency
RTC_CPU_FREQ_80M = 1, //!< 80 MHz
RTC_CPU_FREQ_160M = 2, //!< 160 MHz
RTC_CPU_FREQ_240M = 3, //!< 240 MHz
RTC_CPU_FREQ_2M = 4, //!< 2 MHz
} rtc_cpu_freq_t;
/**
* @brief CPU clock source
*/
typedef enum {
RTC_CPU_FREQ_SRC_XTAL, //!< XTAL
RTC_CPU_FREQ_SRC_PLL, //!< PLL (480M or 320M)
RTC_CPU_FREQ_SRC_8M, //!< Internal 8M RTC oscillator
RTC_CPU_FREQ_SRC_APLL //!< APLL
} rtc_cpu_freq_src_t;
/**
* @brief CPU clock configuration structure
*/
typedef struct rtc_cpu_freq_config_s {
rtc_cpu_freq_src_t source; //!< The clock from which CPU clock is derived
uint32_t source_freq_mhz; //!< Source clock frequency
uint32_t div; //!< Divider, freq_mhz = source_freq_mhz / div
uint32_t freq_mhz; //!< CPU clock frequency
} rtc_cpu_freq_config_t;
/**
* @brief RTC SLOW_CLK frequency values
*/
typedef enum {
RTC_SLOW_FREQ_RTC = 0, //!< Internal 150 kHz RC oscillator
RTC_SLOW_FREQ_32K_XTAL = 1, //!< External 32 kHz XTAL
RTC_SLOW_FREQ_8MD256 = 2, //!< Internal 8 MHz RC oscillator, divided by 256
} rtc_slow_freq_t;
/**
* @brief RTC FAST_CLK frequency values
*/
typedef enum {
RTC_FAST_FREQ_XTALD4 = 0, //!< Main XTAL, divided by 4
RTC_FAST_FREQ_8M = 1, //!< Internal 8 MHz RC oscillator
} rtc_fast_freq_t;
/* With the default value of CK8M_DFREQ, 8M clock frequency is 8.5 MHz +/- 7% */
#define RTC_FAST_CLK_FREQ_APPROX 8500000
/**
* @brief Clock source to be calibrated using rtc_clk_cal function
*/
typedef enum {
RTC_CAL_RTC_MUX = 0, //!< Currently selected RTC SLOW_CLK
RTC_CAL_8MD256 = 1, //!< Internal 8 MHz RC oscillator, divided by 256
RTC_CAL_32K_XTAL = 2 //!< External 32 kHz XTAL
} rtc_cal_sel_t;
/**
* Initialization parameters for rtc_clk_init
*/
typedef struct rtc_clk_config_s {
rtc_xtal_freq_t xtal_freq : 8; //!< Main XTAL frequency
uint32_t cpu_freq_mhz : 10; //!< CPU frequency to set, in MHz
rtc_fast_freq_t fast_freq : 1; //!< RTC_FAST_CLK frequency to set
rtc_slow_freq_t slow_freq : 2; //!< RTC_SLOW_CLK frequency to set
uint32_t clk_8m_div : 3; //!< RTC 8M clock divider (division is by clk_8m_div+1, i.e. 0 means 8MHz frequency)
uint32_t slow_clk_dcap : 8; //!< RTC 150k clock adjustment parameter (higher value leads to lower frequency)
uint32_t clk_8m_dfreq : 8; //!< RTC 8m clock adjustment parameter (higher value leads to higher frequency)
} rtc_clk_config_t;
/**
* Default initializer for rtc_clk_config_t
*/
#define RTC_CLK_CONFIG_DEFAULT() { \
.xtal_freq = RTC_XTAL_FREQ_AUTO, \
.cpu_freq_mhz = 80, \
.fast_freq = RTC_FAST_FREQ_8M, \
.slow_freq = RTC_SLOW_FREQ_RTC, \
.clk_8m_div = 0, \
.slow_clk_dcap = RTC_CNTL_SCK_DCAP_DEFAULT, \
.clk_8m_dfreq = RTC_CNTL_CK8M_DFREQ_DEFAULT, \
}
/**
* Initialize clocks and set CPU frequency
*
* If cfg.xtal_freq is set to RTC_XTAL_FREQ_AUTO, this function will attempt
* to auto detect XTAL frequency. Auto detection is performed by comparing
* XTAL frequency with the frequency of internal 8MHz oscillator. Note that at
* high temperatures the frequency of the internal 8MHz oscillator may drift
* enough for auto detection to be unreliable.
* Auto detection code will attempt to distinguish between 26MHz and 40MHz
* crystals. 24 MHz crystals are not supported by auto detection code.
* If XTAL frequency can not be auto detected, this 26MHz frequency will be used.
*
* @param cfg clock configuration as rtc_clk_config_t
*/
void rtc_clk_init(rtc_clk_config_t cfg);
/**
* @brief Get main XTAL frequency
*
* This is the value stored in RTC register RTC_XTAL_FREQ_REG by the bootloader. As passed to
* rtc_clk_init function, or if the value was RTC_XTAL_FREQ_AUTO, the detected
* XTAL frequency.
*
* @return XTAL frequency, one of rtc_xtal_freq_t
*/
rtc_xtal_freq_t rtc_clk_xtal_freq_get(void);
/**
* @brief Update XTAL frequency
*
* Updates the XTAL value stored in RTC_XTAL_FREQ_REG. Usually this value is ignored
* after startup.
*
* @param xtal_freq New frequency value
*/
void rtc_clk_xtal_freq_update(rtc_xtal_freq_t xtal_freq);
/**
* @brief Enable or disable 32 kHz XTAL oscillator
* @param en true to enable, false to disable
*/
void rtc_clk_32k_enable(bool en);
/**
* @brief Configure 32 kHz XTAL oscillator to accept external clock signal
*/
void rtc_clk_32k_enable_external(void);
/**
* @brief Get the state of 32k XTAL oscillator
* @return true if 32k XTAL oscillator has been enabled
*/
bool rtc_clk_32k_enabled(void);
/**
* @brief Enable 32k oscillator, configuring it for fast startup time.
* Note: to achieve higher frequency stability, rtc_clk_32k_enable function
* must be called one the 32k XTAL oscillator has started up. This function
* will initially disable the 32k XTAL oscillator, so it should not be called
* when the system is using 32k XTAL as RTC_SLOW_CLK.
*
* @param cycle Number of 32kHz cycles to bootstrap external crystal.
* If 0, no square wave will be used to bootstrap crystal oscillation.
*/
void rtc_clk_32k_bootstrap(uint32_t cycle);
/**
* @brief Enable or disable 8 MHz internal oscillator
*
* Output from 8 MHz internal oscillator is passed into a configurable
* divider, which by default divides the input clock frequency by 256.
* Output of the divider may be used as RTC_SLOW_CLK source.
* Output of the divider is referred to in register descriptions and code as
* 8md256 or simply d256. Divider values other than 256 may be configured, but
* this facility is not currently needed, so is not exposed in the code.
*
* When 8MHz/256 divided output is not needed, the divider should be disabled
* to reduce power consumption.
*
* @param clk_8m_en true to enable 8MHz generator
* @param d256_en true to enable /256 divider
*/
void rtc_clk_8m_enable(bool clk_8m_en, bool d256_en);
/**
* @brief Get the state of 8 MHz internal oscillator
* @return true if the oscillator is enabled
*/
bool rtc_clk_8m_enabled(void);
/**
* @brief Get the state of /256 divider which is applied to 8MHz clock
* @return true if the divided output is enabled
*/
bool rtc_clk_8md256_enabled(void);
/**
* @brief Enable or disable APLL
*
* Output frequency is given by the formula:
* apll_freq = xtal_freq * (4 + sdm2 + sdm1/256 + sdm0/65536)/((o_div + 2) * 2)
*
* The dividend in this expression should be in the range of 240 - 600 MHz.
*
* In rev. 0 of ESP32, sdm0 and sdm1 are unused and always set to 0.
*
* @param enable true to enable, false to disable
* @param sdm0 frequency adjustment parameter, 0..255
* @param sdm1 frequency adjustment parameter, 0..255
* @param sdm2 frequency adjustment parameter, 0..63
* @param o_div frequency divider, 0..31
*/
void rtc_clk_apll_enable(bool enable, uint32_t sdm0, uint32_t sdm1,
uint32_t sdm2, uint32_t o_div);
/**
* @brief Select source for RTC_SLOW_CLK
* @param slow_freq clock source (one of rtc_slow_freq_t values)
*/
void rtc_clk_slow_freq_set(rtc_slow_freq_t slow_freq);
/**
* @brief Get the RTC_SLOW_CLK source
* @return currently selected clock source (one of rtc_slow_freq_t values)
*/
rtc_slow_freq_t rtc_clk_slow_freq_get(void);
/**
* @brief Get the approximate frequency of RTC_SLOW_CLK, in Hz
*
* - if RTC_SLOW_FREQ_RTC is selected, returns ~150000
* - if RTC_SLOW_FREQ_32K_XTAL is selected, returns 32768
* - if RTC_SLOW_FREQ_8MD256 is selected, returns ~33000
*
* rtc_clk_cal function can be used to get more precise value by comparing
* RTC_SLOW_CLK frequency to the frequency of main XTAL.
*
* @return RTC_SLOW_CLK frequency, in Hz
*/
uint32_t rtc_clk_slow_freq_get_hz(void);
/**
* @brief Select source for RTC_FAST_CLK
* @param fast_freq clock source (one of rtc_fast_freq_t values)
*/
void rtc_clk_fast_freq_set(rtc_fast_freq_t fast_freq);
/**
* @brief Get the RTC_FAST_CLK source
* @return currently selected clock source (one of rtc_fast_freq_t values)
*/
rtc_fast_freq_t rtc_clk_fast_freq_get(void);
/**
* @brief Get CPU frequency config corresponding to a rtc_cpu_freq_t value
* @param cpu_freq CPU frequency enumeration value
* @param[out] out_config Output, CPU frequency configuration structure
*/
void rtc_clk_cpu_freq_to_config(rtc_cpu_freq_t cpu_freq, rtc_cpu_freq_config_t* out_config);
/**
* @brief Get CPU frequency config for a given frequency
* @param freq_mhz Frequency in MHz
* @param[out] out_config Output, CPU frequency configuration structure
* @return true if frequency can be obtained, false otherwise
*/
bool rtc_clk_cpu_freq_mhz_to_config(uint32_t freq_mhz, rtc_cpu_freq_config_t* out_config);
/**
* @brief Switch CPU frequency
*
* This function sets CPU frequency according to the given configuration
* structure. It enables PLLs, if necessary.
*
* @note This function in not intended to be called by applications in FreeRTOS
* environment. This is because it does not adjust various timers based on the
* new CPU frequency.
*
* @param config CPU frequency configuration structure
*/
void rtc_clk_cpu_freq_set_config(const rtc_cpu_freq_config_t* config);
/**
* @brief Switch CPU frequency (optimized for speed)
*
* This function is a faster equivalent of rtc_clk_cpu_freq_set_config.
* It works faster because it does not disable PLLs when switching from PLL to
* XTAL and does not enabled them when switching back. If PLL is not already
* enabled when this function is called to switch from XTAL to PLL frequency,
* or the PLL which is enabled is the wrong one, this function will fall back
* to calling rtc_clk_cpu_freq_set_config.
*
* Unlike rtc_clk_cpu_freq_set_config, this function relies on static data,
* so it is less safe to use it e.g. from a panic handler (when memory might
* be corrupted).
*
* @note This function in not intended to be called by applications in FreeRTOS
* environment. This is because it does not adjust various timers based on the
* new CPU frequency.
*
* @param config CPU frequency configuration structure
*/
void rtc_clk_cpu_freq_set_config_fast(const rtc_cpu_freq_config_t* config);
/**
* @brief Get the currently used CPU frequency configuration
* @param[out] out_config Output, CPU frequency configuration structure
*/
void rtc_clk_cpu_freq_get_config(rtc_cpu_freq_config_t* out_config);
/**
* @brief Switch CPU clock source to XTAL
*
* Short form for filling in rtc_cpu_freq_config_t structure and calling
* rtc_clk_cpu_freq_set_config when a switch to XTAL is needed.
* Assumes that XTAL frequency has been determined — don't call in startup code.
*/
void rtc_clk_cpu_freq_set_xtal(void);
/**
* @brief Store new APB frequency value into RTC_APB_FREQ_REG
*
* This function doesn't change any hardware clocks.
*
* Functions which perform frequency switching and change APB frequency call
* this function to update the value of APB frequency stored in RTC_APB_FREQ_REG
* (one of RTC general purpose retention registers). This should not normally
* be called from application code.
*
* @param apb_freq new APB frequency, in Hz
*/
void rtc_clk_apb_freq_update(uint32_t apb_freq);
/**
* @brief Get the current stored APB frequency.
* @return The APB frequency value as last set via rtc_clk_apb_freq_update(), in Hz.
*/
uint32_t rtc_clk_apb_freq_get(void);
#define RTC_CLK_CAL_FRACT 19 //!< Number of fractional bits in values returned by rtc_clk_cal
/**
* @brief Measure RTC slow clock's period, based on main XTAL frequency
*
* This function will time out and return 0 if the time for the given number
* of cycles to be counted exceeds the expected time twice. This may happen if
* 32k XTAL is being calibrated, but the oscillator has not started up (due to
* incorrect loading capacitance, board design issue, or lack of 32 XTAL on board).
*
* @param cal_clk clock to be measured
* @param slow_clk_cycles number of slow clock cycles to average
* @return average slow clock period in microseconds, Q13.19 fixed point format,
* or 0 if calibration has timed out
*/
uint32_t rtc_clk_cal(rtc_cal_sel_t cal_clk, uint32_t slow_clk_cycles);
/**
* @brief Measure ratio between XTAL frequency and RTC slow clock frequency
* @param cal_clk slow clock to be measured
* @param slow_clk_cycles number of slow clock cycles to average
* @return average ratio between XTAL frequency and slow clock frequency,
* Q13.19 fixed point format, or 0 if calibration has timed out.
*/
uint32_t rtc_clk_cal_ratio(rtc_cal_sel_t cal_clk, uint32_t slow_clk_cycles);
/**
* @brief Convert time interval from microseconds to RTC_SLOW_CLK cycles
* @param time_in_us Time interval in microseconds
* @param slow_clk_period Period of slow clock in microseconds, Q13.19
* fixed point format (as returned by rtc_slowck_cali).
* @return number of slow clock cycles
*/
uint64_t rtc_time_us_to_slowclk(uint64_t time_in_us, uint32_t period);
/**
* @brief Convert time interval from RTC_SLOW_CLK to microseconds
* @param time_in_us Time interval in RTC_SLOW_CLK cycles
* @param slow_clk_period Period of slow clock in microseconds, Q13.19
* fixed point format (as returned by rtc_slowck_cali).
* @return time interval in microseconds
*/
uint64_t rtc_time_slowclk_to_us(uint64_t rtc_cycles, uint32_t period);
/**
* @brief Get current value of RTC counter
*
* RTC has a 48-bit counter which is incremented by 2 every 2 RTC_SLOW_CLK
* cycles. Counter value is not writable by software. The value is not adjusted
* when switching to a different RTC_SLOW_CLK source.
*
* Note: this function may take up to 1 RTC_SLOW_CLK cycle to execute
*
* @return current value of RTC counter
*/
uint64_t rtc_time_get(void);
/**
* @brief Busy loop until next RTC_SLOW_CLK cycle
*
* This function returns not earlier than the next RTC_SLOW_CLK clock cycle.
* In some cases (e.g. when RTC_SLOW_CLK cycle is very close), it may return
* one RTC_SLOW_CLK cycle later.
*/
void rtc_clk_wait_for_slow_cycle(void);
/**
* @brief sleep configuration for rtc_sleep_init function
*/
typedef struct rtc_sleep_config_s {
uint32_t lslp_mem_inf_fpu : 1; //!< force normal voltage in sleep mode (digital domain memory)
uint32_t rtc_mem_inf_fpu : 1; //!< force normal voltage in sleep mode (RTC memory)
uint32_t rtc_mem_inf_follow_cpu : 1;//!< keep low voltage in sleep mode (even if ULP/touch is used)
uint32_t rtc_fastmem_pd_en : 1; //!< power down RTC fast memory
uint32_t rtc_slowmem_pd_en : 1; //!< power down RTC slow memory
uint32_t rtc_peri_pd_en : 1; //!< power down RTC peripherals
uint32_t wifi_pd_en : 1; //!< power down WiFi
uint32_t rom_mem_pd_en : 1; //!< power down main RAM and ROM
uint32_t deep_slp : 1; //!< power down digital domain
uint32_t wdt_flashboot_mod_en : 1; //!< enable WDT flashboot mode
uint32_t dig_dbias_wak : 3; //!< set bias for digital domain, in active mode
uint32_t dig_dbias_slp : 3; //!< set bias for digital domain, in sleep mode
uint32_t rtc_dbias_wak : 3; //!< set bias for RTC domain, in active mode
uint32_t rtc_dbias_slp : 3; //!< set bias for RTC domain, in sleep mode
uint32_t lslp_meminf_pd : 1; //!< remove all peripheral force power up flags
uint32_t vddsdio_pd_en : 1; //!< power down VDDSDIO regulator
uint32_t xtal_fpu : 1; //!< keep main XTAL powered up in sleep
} rtc_sleep_config_t;
/**
* Default initializer for rtc_sleep_config_t
*
* This initializer sets all fields to "reasonable" values (e.g. suggested for
* production use) based on a combination of RTC_SLEEP_PD_x flags.
*
* @param RTC_SLEEP_PD_x flags combined using bitwise OR
*/
#define RTC_SLEEP_CONFIG_DEFAULT(sleep_flags) { \
.lslp_mem_inf_fpu = 0, \
.rtc_mem_inf_fpu = 0, \
.rtc_mem_inf_follow_cpu = ((sleep_flags) & RTC_SLEEP_PD_RTC_MEM_FOLLOW_CPU) ? 1 : 0, \
.rtc_fastmem_pd_en = ((sleep_flags) & RTC_SLEEP_PD_RTC_FAST_MEM) ? 1 : 0, \
.rtc_slowmem_pd_en = ((sleep_flags) & RTC_SLEEP_PD_RTC_SLOW_MEM) ? 1 : 0, \
.rtc_peri_pd_en = ((sleep_flags) & RTC_SLEEP_PD_RTC_PERIPH) ? 1 : 0, \
.wifi_pd_en = 0, \
.rom_mem_pd_en = 0, \
.deep_slp = ((sleep_flags) & RTC_SLEEP_PD_DIG) ? 1 : 0, \
.wdt_flashboot_mod_en = 0, \
.dig_dbias_wak = RTC_CNTL_DBIAS_1V10, \
.dig_dbias_slp = RTC_CNTL_DBIAS_0V90, \
.rtc_dbias_wak = RTC_CNTL_DBIAS_1V10, \
.rtc_dbias_slp = RTC_CNTL_DBIAS_0V90, \
.lslp_meminf_pd = 1, \
.vddsdio_pd_en = ((sleep_flags) & RTC_SLEEP_PD_VDDSDIO) ? 1 : 0, \
.xtal_fpu = ((sleep_flags) & RTC_SLEEP_PD_XTAL) ? 0 : 1 \
};
#define RTC_SLEEP_PD_DIG BIT(0) //!< Deep sleep (power down digital domain)
#define RTC_SLEEP_PD_RTC_PERIPH BIT(1) //!< Power down RTC peripherals
#define RTC_SLEEP_PD_RTC_SLOW_MEM BIT(2) //!< Power down RTC SLOW memory
#define RTC_SLEEP_PD_RTC_FAST_MEM BIT(3) //!< Power down RTC FAST memory
#define RTC_SLEEP_PD_RTC_MEM_FOLLOW_CPU BIT(4) //!< RTC FAST and SLOW memories are automatically powered up and down along with the CPU
#define RTC_SLEEP_PD_VDDSDIO BIT(5) //!< Power down VDDSDIO regulator
#define RTC_SLEEP_PD_XTAL BIT(6) //!< Power down main XTAL
/**
* @brief Prepare the chip to enter sleep mode
*
* This function configures various power control state machines to handle
* entry into light sleep or deep sleep mode, switches APB and CPU clock source
* (usually to XTAL), and sets bias voltages for digital and RTC power domains.
*
* This function does not actually enter sleep mode; this is done using
* rtc_sleep_start function. Software may do some other actions between
* rtc_sleep_init and rtc_sleep_start, such as set wakeup timer and configure
* wakeup sources.
* @param cfg sleep mode configuration
*/
void rtc_sleep_init(rtc_sleep_config_t cfg);
/**
* @brief Set target value of RTC counter for RTC_TIMER_TRIG_EN wakeup source
* @param t value of RTC counter at which wakeup from sleep will happen;
* only the lower 48 bits are used
*/
void rtc_sleep_set_wakeup_time(uint64_t t);
#define RTC_EXT0_TRIG_EN BIT(0) //!< EXT0 GPIO wakeup
#define RTC_EXT1_TRIG_EN BIT(1) //!< EXT1 GPIO wakeup
#define RTC_GPIO_TRIG_EN BIT(2) //!< GPIO wakeup (light sleep only)
#define RTC_TIMER_TRIG_EN BIT(3) //!< Timer wakeup
#define RTC_SDIO_TRIG_EN BIT(4) //!< SDIO wakeup (light sleep only)
#define RTC_MAC_TRIG_EN BIT(5) //!< MAC wakeup (light sleep only)
#define RTC_UART0_TRIG_EN BIT(6) //!< UART0 wakeup (light sleep only)
#define RTC_UART1_TRIG_EN BIT(7) //!< UART1 wakeup (light sleep only)
#define RTC_TOUCH_TRIG_EN BIT(8) //!< Touch wakeup
#define RTC_ULP_TRIG_EN BIT(9) //!< ULP wakeup
#define RTC_BT_TRIG_EN BIT(10) //!< BT wakeup (light sleep only)
/**
* @brief Enter deep or light sleep mode
*
* This function enters the sleep mode previously configured using rtc_sleep_init
* function. Before entering sleep, software should configure wake up sources
* appropriately (set up GPIO wakeup registers, timer wakeup registers,
* and so on).
*
* If deep sleep mode was configured using rtc_sleep_init, and sleep is not
* rejected by hardware (based on reject_opt flags), this function never returns.
* When the chip wakes up from deep sleep, CPU is reset and execution starts
* from ROM bootloader.
*
* If light sleep mode was configured using rtc_sleep_init, this function
* returns on wakeup, or if sleep is rejected by hardware.
*
* @param wakeup_opt bit mask wake up reasons to enable (RTC_xxx_TRIG_EN flags
* combined with OR)
* @param reject_opt bit mask of sleep reject reasons:
* - RTC_CNTL_GPIO_REJECT_EN
* - RTC_CNTL_SDIO_REJECT_EN
* These flags are used to prevent entering sleep when e.g.
* an external host is communicating via SDIO slave
* @return non-zero if sleep was rejected by hardware
*/
uint32_t rtc_sleep_start(uint32_t wakeup_opt, uint32_t reject_opt);
/**
* RTC power and clock control initialization settings
*/
typedef struct rtc_config_s {
uint32_t ck8m_wait : 8; //!< Number of rtc_fast_clk cycles to wait for 8M clock to be ready
uint32_t xtal_wait : 8; //!< Number of rtc_fast_clk cycles to wait for XTAL clock to be ready
uint32_t pll_wait : 8; //!< Number of rtc_fast_clk cycles to wait for PLL to be ready
uint32_t clkctl_init : 1; //!< Perform clock control related initialization
uint32_t pwrctl_init : 1; //!< Perform power control related initialization
uint32_t rtc_dboost_fpd : 1; //!< Force power down RTC_DBOOST
} rtc_config_t;
/**
* Default initializer of rtc_config_t.
*
* This initializer sets all fields to "reasonable" values (e.g. suggested for
* production use).
*/
#define RTC_CONFIG_DEFAULT() {\
.ck8m_wait = RTC_CNTL_CK8M_WAIT_DEFAULT, \
.xtal_wait = RTC_CNTL_XTL_BUF_WAIT_DEFAULT, \
.pll_wait = RTC_CNTL_PLL_BUF_WAIT_DEFAULT, \
.clkctl_init = 1, \
.pwrctl_init = 1, \
.rtc_dboost_fpd = 1 \
}
/**
* Initialize RTC clock and power control related functions
* @param cfg configuration options as rtc_config_t
*/
void rtc_init(rtc_config_t cfg);
#define RTC_VDDSDIO_TIEH_1_8V 0 //!< TIEH field value for 1.8V VDDSDIO
#define RTC_VDDSDIO_TIEH_3_3V 1 //!< TIEH field value for 3.3V VDDSDIO
/**
* Structure describing vddsdio configuration
*/
typedef struct rtc_vddsdio_config_s {
uint32_t force : 1; //!< If 1, use configuration from RTC registers; if 0, use EFUSE/bootstrapping pins.
uint32_t enable : 1; //!< Enable VDDSDIO regulator
uint32_t tieh : 1; //!< Select VDDSDIO voltage. One of RTC_VDDSDIO_TIEH_1_8V, RTC_VDDSDIO_TIEH_3_3V
uint32_t drefh : 2; //!< Tuning parameter for VDDSDIO regulator
uint32_t drefm : 2; //!< Tuning parameter for VDDSDIO regulator
uint32_t drefl : 2; //!< Tuning parameter for VDDSDIO regulator
} rtc_vddsdio_config_t;
/**
* Get current VDDSDIO configuration
* If VDDSDIO configuration is overridden by RTC, get values from RTC
* Otherwise, if VDDSDIO is configured by EFUSE, get values from EFUSE
* Otherwise, use default values and the level of MTDI bootstrapping pin.
* @return currently used VDDSDIO configuration
*/
rtc_vddsdio_config_t rtc_vddsdio_get_config(void);
/**
* Set new VDDSDIO configuration using RTC registers.
* If config.force == 1, this overrides configuration done using bootstrapping
* pins and EFUSE.
*
* @param config new VDDSDIO configuration
*/
void rtc_vddsdio_set_config(rtc_vddsdio_config_t config);
#ifdef __cplusplus
}
#endif

2081
tools/sdk/esp32/include/soc/soc/esp32/include/soc/rtc_cntl_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

566
tools/sdk/esp32/include/soc/soc/esp32/include/soc/rtc_cntl_struct.h Normal file
View File

@ -0,0 +1,566 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_RTC_CNTL_STRUCT_H_
#define _SOC_RTC_CNTL_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct rtc_cntl_dev_s {
union {
struct {
uint32_t sw_stall_appcpu_c0: 2; /*{reg_sw_stall_appcpu_c1[5:0] reg_sw_stall_appcpu_c0[1:0]} == 0x86 will stall APP CPU*/
uint32_t sw_stall_procpu_c0: 2; /*{reg_sw_stall_procpu_c1[5:0] reg_sw_stall_procpu_c0[1:0]} == 0x86 will stall PRO CPU*/
uint32_t sw_appcpu_rst: 1; /*APP CPU SW reset*/
uint32_t sw_procpu_rst: 1; /*PRO CPU SW reset*/
uint32_t bb_i2c_force_pd: 1; /*BB_I2C force power down*/
uint32_t bb_i2c_force_pu: 1; /*BB_I2C force power up*/
uint32_t bbpll_i2c_force_pd: 1; /*BB_PLL _I2C force power down*/
uint32_t bbpll_i2c_force_pu: 1; /*BB_PLL_I2C force power up*/
uint32_t bbpll_force_pd: 1; /*BB_PLL force power down*/
uint32_t bbpll_force_pu: 1; /*BB_PLL force power up*/
uint32_t xtl_force_pd: 1; /*crystall force power down*/
uint32_t xtl_force_pu: 1; /*crystall force power up*/
uint32_t bias_sleep_folw_8m: 1; /*BIAS_SLEEP follow CK8M*/
uint32_t bias_force_sleep: 1; /*BIAS_SLEEP force sleep*/
uint32_t bias_force_nosleep: 1; /*BIAS_SLEEP force no sleep*/
uint32_t bias_i2c_folw_8m: 1; /*BIAS_I2C follow CK8M*/
uint32_t bias_i2c_force_pd: 1; /*BIAS_I2C force power down*/
uint32_t bias_i2c_force_pu: 1; /*BIAS_I2C force power up*/
uint32_t bias_core_folw_8m: 1; /*BIAS_CORE follow CK8M*/
uint32_t bias_core_force_pd: 1; /*BIAS_CORE force power down*/
uint32_t bias_core_force_pu: 1; /*BIAS_CORE force power up*/
uint32_t xtl_force_iso: 1;
uint32_t pll_force_iso: 1;
uint32_t analog_force_iso: 1;
uint32_t xtl_force_noiso: 1;
uint32_t pll_force_noiso: 1;
uint32_t analog_force_noiso: 1;
uint32_t dg_wrap_force_rst: 1; /*digital wrap force reset in deep sleep*/
uint32_t dg_wrap_force_norst: 1; /*digital core force no reset in deep sleep*/
uint32_t sw_sys_rst: 1; /*SW system reset*/
};
uint32_t val;
} options0;
uint32_t slp_timer0; /*RTC sleep timer low 32 bits*/
union {
struct {
uint32_t slp_val_hi: 16; /*RTC sleep timer high 16 bits*/
uint32_t main_timer_alarm_en: 1; /*timer alarm enable bit*/
uint32_t reserved17: 15;
};
uint32_t val;
} slp_timer1;
union {
struct {
uint32_t reserved0: 30;
uint32_t valid: 1; /*To indicate the register is updated*/
uint32_t update: 1; /*Set 1: to update register with RTC timer*/
};
uint32_t val;
} time_update;
uint32_t time0; /*RTC timer low 32 bits*/
union {
struct {
uint32_t time_hi:16; /*RTC timer high 16 bits*/
uint32_t reserved16: 16;
};
uint32_t val;
} time1;
union {
struct {
uint32_t reserved0: 20;
uint32_t touch_wakeup_force_en: 1; /*touch controller force wake up*/
uint32_t ulp_cp_wakeup_force_en: 1; /*ULP-coprocessor force wake up*/
uint32_t apb2rtc_bridge_sel: 1; /*1: APB to RTC using bridge 0: APB to RTC using sync*/
uint32_t touch_slp_timer_en: 1; /*touch timer enable bit*/
uint32_t ulp_cp_slp_timer_en: 1; /*ULP-coprocessor timer enable bit*/
uint32_t reserved25: 3;
uint32_t sdio_active_ind: 1; /*SDIO active indication*/
uint32_t slp_wakeup: 1; /*sleep wakeup bit*/
uint32_t slp_reject: 1; /*sleep reject bit*/
uint32_t sleep_en: 1; /*sleep enable bit*/
};
uint32_t val;
} state0;
union {
struct {
uint32_t cpu_stall_en: 1; /*CPU stall enable bit*/
uint32_t cpu_stall_wait: 5; /*CPU stall wait cycles in fast_clk_rtc*/
uint32_t ck8m_wait: 8; /*CK8M wait cycles in slow_clk_rtc*/
uint32_t xtl_buf_wait: 10; /*XTAL wait cycles in slow_clk_rtc*/
uint32_t pll_buf_wait: 8; /*PLL wait cycles in slow_clk_rtc*/
};
uint32_t val;
} timer1;
union {
struct {
uint32_t reserved0: 15;
uint32_t ulpcp_touch_start_wait: 9; /*wait cycles in slow_clk_rtc before ULP-coprocessor / touch controller start to work*/
uint32_t min_time_ck8m_off: 8; /*minimal cycles in slow_clk_rtc for CK8M in power down state*/
};
uint32_t val;
} timer2;
union {
struct {
uint32_t wifi_wait_timer: 9;
uint32_t wifi_powerup_timer: 7;
uint32_t rom_ram_wait_timer: 9;
uint32_t rom_ram_powerup_timer: 7;
};
uint32_t val;
} timer3;
union {
struct {
uint32_t rtc_wait_timer: 9;
uint32_t rtc_powerup_timer: 7;
uint32_t dg_wrap_wait_timer: 9;
uint32_t dg_wrap_powerup_timer: 7;
};
uint32_t val;
} timer4;
union {
struct {
uint32_t ulp_cp_subtimer_prediv: 8;
uint32_t min_slp_val: 8; /*minimal sleep cycles in slow_clk_rtc*/
uint32_t rtcmem_wait_timer: 9;
uint32_t rtcmem_powerup_timer: 7;
};
uint32_t val;
} timer5;
union {
struct {
uint32_t reserved0: 23;
uint32_t plla_force_pd: 1; /*PLLA force power down*/
uint32_t plla_force_pu: 1; /*PLLA force power up*/
uint32_t bbpll_cal_slp_start: 1; /*start BBPLL calibration during sleep*/
uint32_t pvtmon_pu: 1; /*1: PVTMON power up otherwise power down*/
uint32_t txrf_i2c_pu: 1; /*1: TXRF_I2C power up otherwise power down*/
uint32_t rfrx_pbus_pu: 1; /*1: RFRX_PBUS power up otherwise power down*/
uint32_t reserved29: 1;
uint32_t ckgen_i2c_pu: 1; /*1: CKGEN_I2C power up otherwise power down*/
uint32_t pll_i2c_pu: 1; /*1: PLL_I2C power up otherwise power down*/
};
uint32_t val;
} ana_conf;
union {
struct {
uint32_t reset_cause_procpu: 6; /*reset cause of PRO CPU*/
uint32_t reset_cause_appcpu: 6; /*reset cause of APP CPU*/
uint32_t appcpu_stat_vector_sel: 1; /*APP CPU state vector sel*/
uint32_t procpu_stat_vector_sel: 1; /*PRO CPU state vector sel*/
uint32_t reserved14: 18;
};
uint32_t val;
} reset_state;
union {
struct {
uint32_t wakeup_cause: 11; /*wakeup cause*/
uint32_t rtc_wakeup_ena: 11; /*wakeup enable bitmap*/
uint32_t gpio_wakeup_filter: 1; /*enable filter for gpio wakeup event*/
uint32_t reserved23: 9;
};
uint32_t val;
} wakeup_state;
union {
struct {
uint32_t slp_wakeup: 1; /*enable sleep wakeup interrupt*/
uint32_t slp_reject: 1; /*enable sleep reject interrupt*/
uint32_t sdio_idle: 1; /*enable SDIO idle interrupt*/
uint32_t rtc_wdt: 1; /*enable RTC WDT interrupt*/
uint32_t rtc_time_valid: 1; /*enable RTC time valid interrupt*/
uint32_t rtc_ulp_cp: 1; /*enable ULP-coprocessor interrupt*/
uint32_t rtc_touch: 1; /*enable touch interrupt*/
uint32_t rtc_brown_out: 1; /*enable brown out interrupt*/
uint32_t rtc_main_timer: 1; /*enable RTC main timer interrupt*/
uint32_t reserved9: 23;
};
uint32_t val;
} int_ena;
union {
struct {
uint32_t slp_wakeup: 1; /*sleep wakeup interrupt raw*/
uint32_t slp_reject: 1; /*sleep reject interrupt raw*/
uint32_t sdio_idle: 1; /*SDIO idle interrupt raw*/
uint32_t rtc_wdt: 1; /*RTC WDT interrupt raw*/
uint32_t rtc_time_valid: 1; /*RTC time valid interrupt raw*/
uint32_t rtc_ulp_cp: 1; /*ULP-coprocessor interrupt raw*/
uint32_t rtc_touch: 1; /*touch interrupt raw*/
uint32_t rtc_brown_out: 1; /*brown out interrupt raw*/
uint32_t rtc_main_timer: 1; /*RTC main timer interrupt raw*/
uint32_t reserved9: 23;
};
uint32_t val;
} int_raw;
union {
struct {
uint32_t slp_wakeup: 1; /*sleep wakeup interrupt state*/
uint32_t slp_reject: 1; /*sleep reject interrupt state*/
uint32_t sdio_idle: 1; /*SDIO idle interrupt state*/
uint32_t rtc_wdt: 1; /*RTC WDT interrupt state*/
uint32_t rtc_time_valid: 1; /*RTC time valid interrupt state*/
uint32_t rtc_sar: 1; /*ULP-coprocessor interrupt state*/
uint32_t rtc_touch: 1; /*touch interrupt state*/
uint32_t rtc_brown_out: 1; /*brown out interrupt state*/
uint32_t rtc_main_timer: 1; /*RTC main timer interrupt state*/
uint32_t reserved9: 23;
};
uint32_t val;
} int_st;
union {
struct {
uint32_t slp_wakeup: 1; /*Clear sleep wakeup interrupt state*/
uint32_t slp_reject: 1; /*Clear sleep reject interrupt state*/
uint32_t sdio_idle: 1; /*Clear SDIO idle interrupt state*/
uint32_t rtc_wdt: 1; /*Clear RTC WDT interrupt state*/
uint32_t rtc_time_valid: 1; /*Clear RTC time valid interrupt state*/
uint32_t rtc_sar: 1; /*Clear ULP-coprocessor interrupt state*/
uint32_t rtc_touch: 1; /*Clear touch interrupt state*/
uint32_t rtc_brown_out: 1; /*Clear brown out interrupt state*/
uint32_t rtc_main_timer: 1; /*Clear RTC main timer interrupt state*/
uint32_t reserved9: 23;
};
uint32_t val;
} int_clr;
uint32_t rtc_store0; /*32-bit general purpose retention register*/
uint32_t rtc_store1; /*32-bit general purpose retention register*/
uint32_t rtc_store2; /*32-bit general purpose retention register*/
uint32_t rtc_store3; /*32-bit general purpose retention register*/
union {
struct {
uint32_t reserved0: 30;
uint32_t ctr_lv: 1; /*0: power down XTAL at high level 1: power down XTAL at low level*/
uint32_t ctr_en: 1; /*enable control XTAL by external pads*/
};
uint32_t val;
} ext_xtl_conf;
union {
struct {
uint32_t reserved0: 30;
uint32_t wakeup0_lv: 1; /*0: external wakeup at low level 1: external wakeup at high level*/
uint32_t wakeup1_lv: 1; /*0: external wakeup at low level 1: external wakeup at high level*/
};
uint32_t val;
} ext_wakeup_conf;
union {
struct {
uint32_t reserved0: 24;
uint32_t gpio_reject_en: 1; /*enable GPIO reject*/
uint32_t sdio_reject_en: 1; /*enable SDIO reject*/
uint32_t light_slp_reject_en: 1; /*enable reject for light sleep*/
uint32_t deep_slp_reject_en: 1; /*enable reject for deep sleep*/
uint32_t reject_cause: 4; /*sleep reject cause*/
};
uint32_t val;
} slp_reject_conf;
union {
struct {
uint32_t reserved0: 29;
uint32_t cpusel_conf: 1; /*CPU sel option*/
uint32_t cpuperiod_sel: 2; /*CPU period sel*/
};
uint32_t val;
} cpu_period_conf;
union {
struct {
uint32_t reserved0: 22;
uint32_t sdio_act_dnum:10;
};
uint32_t val;
} sdio_act_conf;
union {
struct {
uint32_t reserved0: 4;
uint32_t ck8m_div: 2; /*CK8M_D256_OUT divider. 00: div128 01: div256 10: div512 11: div1024.*/
uint32_t enb_ck8m: 1; /*disable CK8M and CK8M_D256_OUT*/
uint32_t enb_ck8m_div: 1; /*1: CK8M_D256_OUT is actually CK8M 0: CK8M_D256_OUT is CK8M divided by 256*/
uint32_t dig_xtal32k_en: 1; /*enable CK_XTAL_32K for digital core (no relationship with RTC core)*/
uint32_t dig_clk8m_d256_en: 1; /*enable CK8M_D256_OUT for digital core (no relationship with RTC core)*/
uint32_t dig_clk8m_en: 1; /*enable CK8M for digital core (no relationship with RTC core)*/
uint32_t ck8m_dfreq_force: 1;
uint32_t ck8m_div_sel: 3; /*divider = reg_ck8m_div_sel + 1*/
uint32_t xtal_force_nogating: 1; /*XTAL force no gating during sleep*/
uint32_t ck8m_force_nogating: 1; /*CK8M force no gating during sleep*/
uint32_t ck8m_dfreq: 8; /*CK8M_DFREQ*/
uint32_t ck8m_force_pd: 1; /*CK8M force power down*/
uint32_t ck8m_force_pu: 1; /*CK8M force power up*/
uint32_t soc_clk_sel: 2; /*SOC clock sel. 0: XTAL 1: PLL 2: CK8M 3: APLL*/
uint32_t fast_clk_rtc_sel: 1; /*fast_clk_rtc sel. 0: XTAL div 4 1: CK8M*/
uint32_t ana_clk_rtc_sel: 2; /*slow_clk_rtc sel. 0: SLOW_CK 1: CK_XTAL_32K 2: CK8M_D256_OUT*/
};
uint32_t val;
} clk_conf;
union {
struct {
uint32_t reserved0: 21;
uint32_t sdio_pd_en: 1; /*power down SDIO_REG in sleep. Only active when reg_sdio_force = 0*/
uint32_t sdio_force: 1; /*1: use SW option to control SDIO_REG 0: use state machine*/
uint32_t sdio_tieh: 1; /*SW option for SDIO_TIEH. Only active when reg_sdio_force = 1*/
uint32_t reg1p8_ready: 1; /*read only register for REG1P8_READY*/
uint32_t drefl_sdio: 2; /*SW option for DREFL_SDIO. Only active when reg_sdio_force = 1*/
uint32_t drefm_sdio: 2; /*SW option for DREFM_SDIO. Only active when reg_sdio_force = 1*/
uint32_t drefh_sdio: 2; /*SW option for DREFH_SDIO. Only active when reg_sdio_force = 1*/
uint32_t xpd_sdio: 1; /*SW option for XPD_SDIO_REG. Only active when reg_sdio_force = 1*/
};
uint32_t val;
} sdio_conf;
union {
struct {
uint32_t reserved0: 24;
uint32_t dbg_atten: 2; /*DBG_ATTEN*/
uint32_t enb_sck_xtal: 1; /*ENB_SCK_XTAL*/
uint32_t inc_heartbeat_refresh: 1; /*INC_HEARTBEAT_REFRESH*/
uint32_t dec_heartbeat_period: 1; /*DEC_HEARTBEAT_PERIOD*/
uint32_t inc_heartbeat_period: 1; /*INC_HEARTBEAT_PERIOD*/
uint32_t dec_heartbeat_width: 1; /*DEC_HEARTBEAT_WIDTH*/
uint32_t rst_bias_i2c: 1; /*RST_BIAS_I2C*/
};
uint32_t val;
} bias_conf;
union {
struct {
uint32_t reserved0: 7;
uint32_t sck_dcap_force: 1; /*N/A*/
uint32_t dig_dbias_slp: 3; /*DIG_REG_DBIAS during sleep*/
uint32_t dig_dbias_wak: 3; /*DIG_REG_DBIAS during wakeup*/
uint32_t sck_dcap: 8; /*SCK_DCAP*/
uint32_t rtc_dbias_slp: 3; /*RTC_DBIAS during sleep*/
uint32_t rtc_dbias_wak: 3; /*RTC_DBIAS during wakeup*/
uint32_t rtc_dboost_force_pd: 1; /*RTC_DBOOST force power down*/
uint32_t rtc_dboost_force_pu: 1; /*RTC_DBOOST force power up*/
uint32_t rtc_force_pd: 1; /*RTC_REG force power down (for RTC_REG power down means decrease the voltage to 0.8v or lower )*/
uint32_t rtc_force_pu: 1; /*RTC_REG force power up*/
};
uint32_t val;
} rtc;
union {
struct {
uint32_t fastmem_force_noiso: 1; /*Fast RTC memory force no ISO*/
uint32_t fastmem_force_iso: 1; /*Fast RTC memory force ISO*/
uint32_t slowmem_force_noiso: 1; /*RTC memory force no ISO*/
uint32_t slowmem_force_iso: 1; /*RTC memory force ISO*/
uint32_t rtc_force_iso: 1; /*rtc_peri force ISO*/
uint32_t force_noiso: 1; /*rtc_peri force no ISO*/
uint32_t fastmem_folw_cpu: 1; /*1: Fast RTC memory PD following CPU 0: fast RTC memory PD following RTC state machine*/
uint32_t fastmem_force_lpd: 1; /*Fast RTC memory force PD*/
uint32_t fastmem_force_lpu: 1; /*Fast RTC memory force no PD*/
uint32_t slowmem_folw_cpu: 1; /*1: RTC memory PD following CPU 0: RTC memory PD following RTC state machine*/
uint32_t slowmem_force_lpd: 1; /*RTC memory force PD*/
uint32_t slowmem_force_lpu: 1; /*RTC memory force no PD*/
uint32_t fastmem_force_pd: 1; /*Fast RTC memory force power down*/
uint32_t fastmem_force_pu: 1; /*Fast RTC memory force power up*/
uint32_t fastmem_pd_en: 1; /*enable power down fast RTC memory in sleep*/
uint32_t slowmem_force_pd: 1; /*RTC memory force power down*/
uint32_t slowmem_force_pu: 1; /*RTC memory force power up*/
uint32_t slowmem_pd_en: 1; /*enable power down RTC memory in sleep*/
uint32_t pwc_force_pd: 1; /*rtc_peri force power down*/
uint32_t pwc_force_pu: 1; /*rtc_peri force power up*/
uint32_t pd_en: 1; /*enable power down rtc_peri in sleep*/
uint32_t reserved21: 11;
};
uint32_t val;
} rtc_pwc;
union {
struct {
uint32_t reserved0: 3;
uint32_t lslp_mem_force_pd: 1; /*memories in digital core force PD in sleep*/
uint32_t lslp_mem_force_pu: 1; /*memories in digital core force no PD in sleep*/
uint32_t rom0_force_pd: 1; /*ROM force power down*/
uint32_t rom0_force_pu: 1; /*ROM force power up*/
uint32_t inter_ram0_force_pd: 1; /*internal SRAM 0 force power down*/
uint32_t inter_ram0_force_pu: 1; /*internal SRAM 0 force power up*/
uint32_t inter_ram1_force_pd: 1; /*internal SRAM 1 force power down*/
uint32_t inter_ram1_force_pu: 1; /*internal SRAM 1 force power up*/
uint32_t inter_ram2_force_pd: 1; /*internal SRAM 2 force power down*/
uint32_t inter_ram2_force_pu: 1; /*internal SRAM 2 force power up*/
uint32_t inter_ram3_force_pd: 1; /*internal SRAM 3 force power down*/
uint32_t inter_ram3_force_pu: 1; /*internal SRAM 3 force power up*/
uint32_t inter_ram4_force_pd: 1; /*internal SRAM 4 force power down*/
uint32_t inter_ram4_force_pu: 1; /*internal SRAM 4 force power up*/
uint32_t wifi_force_pd: 1; /*wifi force power down*/
uint32_t wifi_force_pu: 1; /*wifi force power up*/
uint32_t dg_wrap_force_pd: 1; /*digital core force power down*/
uint32_t dg_wrap_force_pu: 1; /*digital core force power up*/
uint32_t reserved21: 3;
uint32_t rom0_pd_en: 1; /*enable power down ROM in sleep*/
uint32_t inter_ram0_pd_en: 1; /*enable power down internal SRAM 0 in sleep*/
uint32_t inter_ram1_pd_en: 1; /*enable power down internal SRAM 1 in sleep*/
uint32_t inter_ram2_pd_en: 1; /*enable power down internal SRAM 2 in sleep*/
uint32_t inter_ram3_pd_en: 1; /*enable power down internal SRAM 3 in sleep*/
uint32_t inter_ram4_pd_en: 1; /*enable power down internal SRAM 4 in sleep*/
uint32_t wifi_pd_en: 1; /*enable power down wifi in sleep*/
uint32_t dg_wrap_pd_en: 1; /*enable power down digital core in sleep*/
};
uint32_t val;
} dig_pwc;
union {
struct {
uint32_t reserved0: 7;
uint32_t dig_iso_force_off: 1;
uint32_t dig_iso_force_on: 1;
uint32_t dg_pad_autohold: 1; /*read only register to indicate digital pad auto-hold status*/
uint32_t clr_dg_pad_autohold: 1; /*wtite only register to clear digital pad auto-hold*/
uint32_t dg_pad_autohold_en: 1; /*digital pad enable auto-hold*/
uint32_t dg_pad_force_noiso: 1; /*digital pad force no ISO*/
uint32_t dg_pad_force_iso: 1; /*digital pad force ISO*/
uint32_t dg_pad_force_unhold: 1; /*digital pad force un-hold*/
uint32_t dg_pad_force_hold: 1; /*digital pad force hold*/
uint32_t rom0_force_iso: 1; /*ROM force ISO*/
uint32_t rom0_force_noiso: 1; /*ROM force no ISO*/
uint32_t inter_ram0_force_iso: 1; /*internal SRAM 0 force ISO*/
uint32_t inter_ram0_force_noiso: 1; /*internal SRAM 0 force no ISO*/
uint32_t inter_ram1_force_iso: 1; /*internal SRAM 1 force ISO*/
uint32_t inter_ram1_force_noiso: 1; /*internal SRAM 1 force no ISO*/
uint32_t inter_ram2_force_iso: 1; /*internal SRAM 2 force ISO*/
uint32_t inter_ram2_force_noiso: 1; /*internal SRAM 2 force no ISO*/
uint32_t inter_ram3_force_iso: 1; /*internal SRAM 3 force ISO*/
uint32_t inter_ram3_force_noiso: 1; /*internal SRAM 3 force no ISO*/
uint32_t inter_ram4_force_iso: 1; /*internal SRAM 4 force ISO*/
uint32_t inter_ram4_force_noiso: 1; /*internal SRAM 4 force no ISO*/
uint32_t wifi_force_iso: 1; /*wifi force ISO*/
uint32_t wifi_force_noiso: 1; /*wifi force no ISO*/
uint32_t dg_wrap_force_iso: 1; /*digital core force ISO*/
uint32_t dg_wrap_force_noiso: 1; /*digital core force no ISO*/
};
uint32_t val;
} dig_iso;
union {
struct {
uint32_t reserved0: 7;
uint32_t pause_in_slp: 1; /*pause WDT in sleep*/
uint32_t appcpu_reset_en: 1; /*enable WDT reset APP CPU*/
uint32_t procpu_reset_en: 1; /*enable WDT reset PRO CPU*/
uint32_t flashboot_mod_en: 1; /*enable WDT in flash boot*/
uint32_t sys_reset_length: 3; /*system reset counter length*/
uint32_t cpu_reset_length: 3; /*CPU reset counter length*/
uint32_t level_int_en: 1; /*When set, level type interrupt generation is enabled*/
uint32_t edge_int_en: 1; /*When set, edge type interrupt generation is enabled*/
uint32_t stg3: 3; /*1: interrupt stage en 2: CPU reset stage en 3: system reset stage en 4: RTC reset stage en*/
uint32_t stg2: 3; /*1: interrupt stage en 2: CPU reset stage en 3: system reset stage en 4: RTC reset stage en*/
uint32_t stg1: 3; /*1: interrupt stage en 2: CPU reset stage en 3: system reset stage en 4: RTC reset stage en*/
uint32_t stg0: 3; /*1: interrupt stage en 2: CPU reset stage en 3: system reset stage en 4: RTC reset stage en*/
uint32_t en: 1; /*enable RTC WDT*/
};
uint32_t val;
} wdt_config0;
uint32_t wdt_config1; /**/
uint32_t wdt_config2; /**/
uint32_t wdt_config3; /**/
uint32_t wdt_config4; /**/
union {
struct {
uint32_t reserved0: 31;
uint32_t feed: 1;
};
uint32_t val;
} wdt_feed;
uint32_t wdt_wprotect; /**/
union {
struct {
uint32_t reserved0: 29;
uint32_t ent_rtc: 1; /*ENT_RTC*/
uint32_t dtest_rtc: 2; /*DTEST_RTC*/
};
uint32_t val;
} test_mux;
union {
struct {
uint32_t reserved0: 20;
uint32_t appcpu_c1: 6; /*{reg_sw_stall_appcpu_c1[5:0] reg_sw_stall_appcpu_c0[1:0]} == 0x86 will stall APP CPU*/
uint32_t procpu_c1: 6; /*{reg_sw_stall_procpu_c1[5:0] reg_sw_stall_procpu_c0[1:0]} == 0x86 will stall PRO CPU*/
};
uint32_t val;
} sw_cpu_stall;
uint32_t store4; /*32-bit general purpose retention register*/
uint32_t store5; /*32-bit general purpose retention register*/
uint32_t store6; /*32-bit general purpose retention register*/
uint32_t store7; /*32-bit general purpose retention register*/
uint32_t diag0; /**/
uint32_t diag1; /**/
union {
struct {
uint32_t adc1_hold_force: 1;
uint32_t adc2_hold_force: 1;
uint32_t pdac1_hold_force: 1;
uint32_t pdac2_hold_force: 1;
uint32_t sense1_hold_force: 1;
uint32_t sense2_hold_force: 1;
uint32_t sense3_hold_force: 1;
uint32_t sense4_hold_force: 1;
uint32_t touch_pad0_hold_force: 1;
uint32_t touch_pad1_hold_force: 1;
uint32_t touch_pad2_hold_force: 1;
uint32_t touch_pad3_hold_force: 1;
uint32_t touch_pad4_hold_force: 1;
uint32_t touch_pad5_hold_force: 1;
uint32_t touch_pad6_hold_force: 1;
uint32_t touch_pad7_hold_force: 1;
uint32_t x32p_hold_force: 1;
uint32_t x32n_hold_force: 1;
uint32_t reserved18: 14;
};
uint32_t val;
} hold_force;
union {
struct {
uint32_t ext_wakeup1_sel: 18; /*Bitmap to select RTC pads for ext wakeup1*/
uint32_t ext_wakeup1_status_clr: 1; /*clear ext wakeup1 status*/
uint32_t reserved19: 13;
};
uint32_t val;
} ext_wakeup1;
union {
struct {
uint32_t ext_wakeup1_status:18; /*ext wakeup1 status*/
uint32_t reserved18: 14;
};
uint32_t val;
} ext_wakeup1_status;
union {
struct {
uint32_t reserved0: 14;
uint32_t close_flash_ena: 1; /*enable close flash when brown out happens*/
uint32_t pd_rf_ena: 1; /*enable power down RF when brown out happens*/
uint32_t rst_wait: 10; /*brown out reset wait cycles*/
uint32_t rst_ena: 1; /*enable brown out reset*/
uint32_t thres: 3; /*brown out threshold*/
uint32_t ena: 1; /*enable brown out*/
uint32_t det: 1; /*brown out detect*/
};
uint32_t val;
} brown_out;
uint32_t reserved_39;
uint32_t reserved_3d;
uint32_t reserved_41;
uint32_t reserved_45;
uint32_t reserved_49;
uint32_t reserved_4d;
union {
struct {
uint32_t date: 28;
uint32_t reserved28: 4;
};
uint32_t val;
} date;
} rtc_cntl_dev_t;
extern rtc_cntl_dev_t RTCCNTL;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_RTC_CNTL_STRUCT_H_ */

288
tools/sdk/esp32/include/soc/soc/esp32/include/soc/rtc_i2c_reg.h Normal file
View File

@ -0,0 +1,288 @@
// Copyright 2016-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "soc.h"
/**
* This file lists peripheral registers of an I2C controller which is part of the RTC.
* ULP coprocessor uses this controller to implement I2C_RD and I2C_WR instructions.
*
* Part of the functionality of this controller (such as slave mode, and multi-byte
* transfers) is not wired to the ULP, and is such, is not available to the
* ULP programs.
*/
#define RTC_I2C_SCL_LOW_PERIOD_REG (DR_REG_RTC_I2C_BASE + 0x000)
/* RTC_I2C_SCL_LOW_PERIOD : R/W ;bitpos:[18:0] ;default: 19'b0 ; */
/*description: number of cycles that scl == 0 */
#define RTC_I2C_SCL_LOW_PERIOD 0x1FFFFFF
#define RTC_I2C_SCL_LOW_PERIOD_M ((RTC_I2C_SCL_LOW_PERIOD_V)<<(RTC_I2C_SCL_LOW_PERIOD_S))
#define RTC_I2C_SCL_LOW_PERIOD_V 0x1FFFFFF
#define RTC_I2C_SCL_LOW_PERIOD_S 0
#define RTC_I2C_CTRL_REG (DR_REG_RTC_I2C_BASE + 0x004)
/* RTC_I2C_RX_LSB_FIRST : R/W ;bitpos:[7] ;default: 1'b0 ; */
/*description: Receive LSB first */
#define RTC_I2C_RX_LSB_FIRST BIT(7)
#define RTC_I2C_RX_LSB_FIRST_M BIT(7)
#define RTC_I2C_RX_LSB_FIRST_V (1)
#define RTC_I2C_RX_LSB_FIRST_S (7)
/* RTC_I2C_TX_LSB_FIRST : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: Send LSB first */
#define RTC_I2C_TX_LSB_FIRST BIT(6)
#define RTC_I2C_TX_LSB_FIRST_M BIT(6)
#define RTC_I2C_TX_LSB_FIRST_V (1)
#define RTC_I2C_TX_LSB_FIRST_S (6)
/* RTC_I2C_TRANS_START : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: Force to generate start condition */
#define RTC_I2C_TRANS_START BIT(5)
#define RTC_I2C_TRANS_START_M BIT(5)
#define RTC_I2C_TRANS_START_V (1)
#define RTC_I2C_TRANS_START_S (5)
/* RTC_I2C_MS_MODE : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: Master (1) or slave (0) */
#define RTC_I2C_MS_MODE BIT(4)
#define RTC_I2C_MS_MODE_M BIT(4)
#define RTC_I2C_MS_MODE_V (1)
#define RTC_I2C_MS_MODE_S (4)
/* RTC_I2C_SCL_FORCE_OUT : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: SCL is push-pull (1) or open-drain (0) */
#define RTC_I2C_SCL_FORCE_OUT BIT(1)
#define RTC_I2C_SCL_FORCE_OUT_M BIT(1)
#define RTC_I2C_SCL_FORCE_OUT_V (1)
#define RTC_I2C_SCL_FORCE_OUT_S (1)
/* RTC_I2C_SDA_FORCE_OUT : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: SDA is push-pull (1) or open-drain (0) */
#define RTC_I2C_SDA_FORCE_OUT BIT(0)
#define RTC_I2C_SDA_FORCE_OUT_M BIT(0)
#define RTC_I2C_SDA_FORCE_OUT_V (1)
#define RTC_I2C_SDA_FORCE_OUT_S (0)
#define RTC_I2C_DEBUG_STATUS_REG (DR_REG_RTC_I2C_BASE + 0x008)
/* RTC_I2C_SCL_STATE : R/W ;bitpos:[30:28] ;default: 3'b0 ; */
/*description: state of SCL state machine */
#define RTC_I2C_SCL_STATE 0x7
#define RTC_I2C_SCL_STATE_M ((RTC_I2C_SCL_STATE_V)<<(RTC_I2C_SCL_STATE_S))
#define RTC_I2C_SCL_STATE_V 0x7
#define RTC_I2C_SCL_STATE_S 28
/* RTC_I2C_MAIN_STATE : R/W ;bitpos:[27:25] ;default: 3'b0 ; */
/*description: state of the main state machine */
#define RTC_I2C_MAIN_STATE 0x7
#define RTC_I2C_MAIN_STATE_M ((RTC_I2C_MAIN_STATE_V)<<(RTC_I2C_MAIN_STATE_S))
#define RTC_I2C_MAIN_STATE_V 0x7
#define RTC_I2C_MAIN_STATE_S 25
/* RTC_I2C_BYTE_TRANS : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: 8 bit transmit done */
#define RTC_I2C_BYTE_TRANS BIT(6)
#define RTC_I2C_BYTE_TRANS_M BIT(6)
#define RTC_I2C_BYTE_TRANS_V (1)
#define RTC_I2C_BYTE_TRANS_S (6)
/* RTC_I2C_SLAVE_ADDR_MATCH : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: When working as a slave, whether address was matched */
#define RTC_I2C_SLAVE_ADDR_MATCH BIT(5)
#define RTC_I2C_SLAVE_ADDR_MATCH_M BIT(5)
#define RTC_I2C_SLAVE_ADDR_MATCH_V (1)
#define RTC_I2C_SLAVE_ADDR_MATCH_S (5)
/* RTC_I2C_BUS_BUSY : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: operation is in progress */
#define RTC_I2C_BUS_BUSY BIT(4)
#define RTC_I2C_BUS_BUSY_M BIT(4)
#define RTC_I2C_BUS_BUSY_V (1)
#define RTC_I2C_BUS_BUSY_S (4)
/* RTC_I2C_ARB_LOST : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: When working as a master, lost control of I2C bus */
#define RTC_I2C_ARB_LOST BIT(3)
#define RTC_I2C_ARB_LOST_M BIT(3)
#define RTC_I2C_ARB_LOST_V (1)
#define RTC_I2C_ARB_LOST_S (3)
/* RTC_I2C_TIMED_OUT : R/W ;bitpos:[2] ;default: 1'b0 ; */
/*description: Transfer has timed out */
#define RTC_I2C_TIMED_OUT BIT(2)
#define RTC_I2C_TIMED_OUT_M BIT(2)
#define RTC_I2C_TIMED_OUT_V (1)
#define RTC_I2C_TIMED_OUT_S (2)
/* RTC_I2C_SLAVE_RW : R/W ;bitpos:[1] ;default: 1'b0 ; */
/*description: When working as a slave, the value of R/W bit received */
#define RTC_I2C_SLAVE_RW BIT(1)
#define RTC_I2C_SLAVE_RW_M BIT(1)
#define RTC_I2C_SLAVE_RW_V (1)
#define RTC_I2C_SLAVE_RW_S (1)
/* RTC_I2C_ACK_VAL : R/W ;bitpos:[0] ;default: 1'b0 ; */
/*description: The value of an acknowledge signal on the bus */
#define RTC_I2C_ACK_VAL BIT(0)
#define RTC_I2C_ACK_VAL_M BIT(0)
#define RTC_I2C_ACK_VAL_V (1)
#define RTC_I2C_ACK_VAL_S (0)
#define RTC_I2C_TIMEOUT_REG (DR_REG_RTC_I2C_BASE + 0x00c)
/* RTC_I2C_TIMEOUT : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: Maximum number of FAST_CLK cycles that the transmission can take */
#define RTC_I2C_TIMEOUT 0xFFFFF
#define RTC_I2C_TIMEOUT_M ((RTC_I2C_TIMEOUT_V)<<(RTC_I2C_TIMEOUT_S))
#define RTC_I2C_TIMEOUT_V 0xFFFFF
#define RTC_I2C_TIMEOUT_S 0
#define RTC_I2C_SLAVE_ADDR_REG (DR_REG_RTC_I2C_BASE + 0x010)
/* RTC_I2C_SLAVE_ADDR_10BIT : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: Set if local slave address is 10-bit */
#define RTC_I2C_SLAVE_ADDR_10BIT BIT(31)
#define RTC_I2C_SLAVE_ADDR_10BIT_M BIT(31)
#define RTC_I2C_SLAVE_ADDR_10BIT_V (1)
#define RTC_I2C_SLAVE_ADDR_10BIT_S (31)
/* RTC_I2C_SLAVE_ADDR : R/W ;bitpos:[14:0] ;default: 15'b0 ; */
/*description: local slave address */
#define RTC_I2C_SLAVE_ADDR 0x7FFF
#define RTC_I2C_SLAVE_ADDR_M ((RTC_I2C_SLAVE_ADDR_V)<<(RTC_I2C_SLAVE_ADDR_S))
#define RTC_I2C_SLAVE_ADDR_V 0x7FFF
#define RTC_I2C_SLAVE_ADDR_S 0
/* Result of last read operation. Not used directly as the data will be
* returned to the ULP. Listed for debugging purposes.
*/
#define RTC_I2C_DATA_REG (DR_REG_RTC_I2C_BASE + 0x01c)
/* Interrupt registers; since the interrupt from RTC_I2C is not connected,
* these registers are only listed for debugging purposes.
*/
/* Interrupt raw status register */
#define RTC_I2C_INT_RAW_REG (DR_REG_RTC_I2C_BASE + 0x020)
/* RTC_I2C_TIME_OUT_INT_RAW : R/O ;bitpos:[7] ;default: 1'b0 ; */
/*description: time out interrupt raw status */
#define RTC_I2C_TIME_OUT_INT_RAW BIT(7)
#define RTC_I2C_TIME_OUT_INT_RAW_M BIT(7)
#define RTC_I2C_TIME_OUT_INT_RAW_V (1)
#define RTC_I2C_TIME_OUT_INT_RAW_S (7)
/* RTC_I2C_TRANS_COMPLETE_INT_RAW : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: Stop condition has been detected interrupt raw status */
#define RTC_I2C_TRANS_COMPLETE_INT_RAW BIT(6)
#define RTC_I2C_TRANS_COMPLETE_INT_RAW_M BIT(6)
#define RTC_I2C_TRANS_COMPLETE_INT_RAW_V (1)
#define RTC_I2C_TRANS_COMPLETE_INT_RAW_S (6)
/* RTC_I2C_MASTER_TRANS_COMPLETE_INT_RAW : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: */
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_RAW BIT(5)
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_RAW_M BIT(5)
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_RAW_V (1)
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_RAW_S (5)
/* RTC_I2C_ARBITRATION_LOST_INT_RAW : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: Master lost arbitration */
#define RTC_I2C_ARBITRATION_LOST_INT_RAW BIT(4)
#define RTC_I2C_ARBITRATION_LOST_INT_RAW_M BIT(4)
#define RTC_I2C_ARBITRATION_LOST_INT_RAW_V (1)
#define RTC_I2C_ARBITRATION_LOST_INT_RAW_S (4)
/* RTC_I2C_SLAVE_TRANS_COMPLETE_INT_RAW : R/W ;bitpos:[3] ;default: 1'b0 ; */
/*description: Slave accepted 1 byte and address matched */
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_RAW BIT(3)
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_RAW_M BIT(3)
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_RAW_V (1)
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_RAW_S (3)
/* Interrupt clear register */
#define RTC_I2C_INT_CLR_REG (DR_REG_RTC_I2C_BASE + 0x024)
/* RTC_I2C_TIME_OUT_INT_CLR : W/O ;bitpos:[8] ;default: 1'b0 ; */
/*description: */
#define RTC_I2C_TIME_OUT_INT_CLR BIT(8)
#define RTC_I2C_TIME_OUT_INT_CLR_M BIT(8)
#define RTC_I2C_TIME_OUT_INT_CLR_V (1)
#define RTC_I2C_TIME_OUT_INT_CLR_S (8)
/* RTC_I2C_TRANS_COMPLETE_INT_CLR : R/W ;bitpos:[7] ;default: 1'b0 ; */
/*description: */
#define RTC_I2C_TRANS_COMPLETE_INT_CLR BIT(7)
#define RTC_I2C_TRANS_COMPLETE_INT_CLR_M BIT(7)
#define RTC_I2C_TRANS_COMPLETE_INT_CLR_V (1)
#define RTC_I2C_TRANS_COMPLETE_INT_CLR_S (7)
/* RTC_I2C_MASTER_TRANS_COMPLETE_INT_CLR : R/W ;bitpos:[6] ;default: 1'b0 ; */
/*description: */
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_CLR BIT(6)
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_CLR_M BIT(6)
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_CLR_V (1)
#define RTC_I2C_MASTER_TRANS_COMPLETE_INT_CLR_S (6)
/* RTC_I2C_ARBITRATION_LOST_INT_CLR : R/W ;bitpos:[5] ;default: 1'b0 ; */
/*description: */
#define RTC_I2C_ARBITRATION_LOST_INT_CLR BIT(5)
#define RTC_I2C_ARBITRATION_LOST_INT_CLR_M BIT(5)
#define RTC_I2C_ARBITRATION_LOST_INT_CLR_V (1)
#define RTC_I2C_ARBITRATION_LOST_INT_CLR_S (5)
/* RTC_I2C_SLAVE_TRANS_COMPLETE_INT_CLR : R/W ;bitpos:[4] ;default: 1'b0 ; */
/*description: */
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_CLR BIT(4)
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_CLR_M BIT(4)
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_CLR_V (1)
#define RTC_I2C_SLAVE_TRANS_COMPLETE_INT_CLR_S (4)
/* Interrupt enable register.
* Bit definitions are not given here, because interrupt functionality
* of RTC_I2C is not used.
*/
#define RTC_I2C_INT_EN_REG (DR_REG_RTC_I2C_BASE + 0x028)
/* Masked interrupt status register.
* Bit definitions are not given here, because interrupt functionality
* of RTC_I2C is not used.
*/
#define RTC_I2C_INT_ST_REG (DR_REG_RTC_I2C_BASE + 0x02c)
#define RTC_I2C_SDA_DUTY_REG (DR_REG_RTC_I2C_BASE + 0x030)
/* RTC_I2C_SDA_DUTY : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: Number of FAST_CLK cycles SDA will switch after falling edge of SCL */
#define RTC_I2C_SDA_DUTY 0xFFFFF
#define RTC_I2C_SDA_DUTY_M ((RTC_I2C_SDA_DUTY_V)<<(RTC_I2C_SDA_DUTY_S))
#define RTC_I2C_SDA_DUTY_V 0xFFFFF
#define RTC_I2C_SDA_DUTY_S 0
#define RTC_I2C_SCL_HIGH_PERIOD_REG (DR_REG_RTC_I2C_BASE + 0x038)
/* RTC_I2C_SCL_HIGH_PERIOD : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: Number of FAST_CLK cycles for SCL to be high */
#define RTC_I2C_SCL_HIGH_PERIOD 0xFFFFF
#define RTC_I2C_SCL_HIGH_PERIOD_M ((RTC_I2C_SCL_HIGH_PERIOD_V)<<(RTC_I2C_SCL_HIGH_PERIOD_S))
#define RTC_I2C_SCL_HIGH_PERIOD_V 0xFFFFF
#define RTC_I2C_SCL_HIGH_PERIOD_S 0
#define RTC_I2C_SCL_START_PERIOD_REG (DR_REG_RTC_I2C_BASE + 0x040)
/* RTC_I2C_SCL_START_PERIOD : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: Number of FAST_CLK cycles to wait before generating start condition */
#define RTC_I2C_SCL_START_PERIOD 0xFFFFF
#define RTC_I2C_SCL_START_PERIOD_M ((RTC_I2C_SCL_START_PERIOD_V)<<(RTC_I2C_SCL_START_PERIOD_S))
#define RTC_I2C_SCL_START_PERIOD_V 0xFFFFF
#define RTC_I2C_SCL_START_PERIOD_S 0
#define RTC_I2C_SCL_STOP_PERIOD_REG (DR_REG_RTC_I2C_BASE + 0x044)
/* RTC_I2C_SCL_STOP_PERIOD : R/W ;bitpos:[19:0] ;default: 20'b0 ; */
/*description: Number of FAST_CLK cycles to wait before generating stop condition */
#define RTC_I2C_SCL_STOP_PERIOD 0xFFFFF
#define RTC_I2C_SCL_STOP_PERIOD_M ((RTC_I2C_SCL_STOP_PERIOD_V)<<(RTC_I2C_SCL_STOP_PERIOD_S))
#define RTC_I2C_SCL_STOP_PERIOD_V 0xFFFFF
#define RTC_I2C_SCL_STOP_PERIOD_S 0
/* A block of 16 RTC_I2C_CMD registers which describe I2C operation to be
* performed. Unused when ULP is controlling RTC_I2C.
*/
#define RTC_I2C_CMD_REG_COUNT 16
#define RTC_I2C_CMD_REG(i) (DR_REG_RTC_I2C_BASE + 0x048 + (i) * 4)
/* RTC_I2C_CMD_DONE : R/W ;bitpos:[31] ;default: 1'b0 ; */
/*description: Bit is set by HW when command is done */
#define RTC_I2C_CMD_DONE BIT(31)
#define RTC_I2C_CMD_DONE_M BIT(31)
#define RTC_I2C_CMD_DONE_V (1)
#define RTC_I2C_CMD_DONE_S (31)
/* RTC_I2C_VAL : R/W ;bitpos:[13:0] ;default: 14'b0 ; */
/*description: Command content */
#define RTC_I2C_VAL 0
#define RTC_I2C_VAL_M ((RTC_I2C_VAL_V)<<(RTC_I2C_VAL_S))
#define RTC_I2C_VAL_V 0x3FFF
#define RTC_I2C_VAL_S 0

21
tools/sdk/esp32/include/soc/soc/esp32/include/soc/rtc_io_caps.h Normal file
View File

@ -0,0 +1,21 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_RTC_IO_CAPS_H_
#define _SOC_RTC_IO_CAPS_H_
#define SOC_RTC_IO_PIN_COUNT 18
#define SOC_PIN_FUNC_RTC_IO 0
#endif

75
tools/sdk/esp32/include/soc/soc/esp32/include/soc/rtc_io_channel.h Normal file
View File

@ -0,0 +1,75 @@
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_RTC_IO_CHANNEL_H
#define _SOC_RTC_IO_CHANNEL_H
#define RTC_GPIO_NUMBER 18
//RTC GPIO channels
#define RTCIO_GPIO36_CHANNEL 0 //RTCIO_CHANNEL_0
#define RTCIO_CHANNEL_0_GPIO_NUM 36
#define RTCIO_GPIO37_CHANNEL 1 //RTCIO_CHANNEL_1
#define RTCIO_CHANNEL_1_GPIO_NUM 37
#define RTCIO_GPIO38_CHANNEL 2 //RTCIO_CHANNEL_2
#define RTCIO_CHANNEL_2_GPIO_NUM 38
#define RTCIO_GPIO39_CHANNEL 3 //RTCIO_CHANNEL_3
#define RTCIO_CHANNEL_3_GPIO_NUM 39
#define RTCIO_GPIO34_CHANNEL 4 //RTCIO_CHANNEL_4
#define RTCIO_CHANNEL_4_GPIO_NUM 34
#define RTCIO_GPIO35_CHANNEL 5 //RTCIO_CHANNEL_5
#define RTCIO_CHANNEL_5_GPIO_NUM 35
#define RTCIO_GPIO25_CHANNEL 6 //RTCIO_CHANNEL_6
#define RTCIO_CHANNEL_6_GPIO_NUM 25
#define RTCIO_GPIO26_CHANNEL 7 //RTCIO_CHANNEL_7
#define RTCIO_CHANNEL_7_GPIO_NUM 26
#define RTCIO_GPIO33_CHANNEL 8 //RTCIO_CHANNEL_8
#define RTCIO_CHANNEL_8_GPIO_NUM 33
#define RTCIO_GPIO32_CHANNEL 9 //RTCIO_CHANNEL_9
#define RTCIO_CHANNEL_9_GPIO_NUM 32
#define RTCIO_GPIO4_CHANNEL 10 //RTCIO_CHANNEL_10
#define RTCIO_CHANNEL_10_GPIO_NUM 4
#define RTCIO_GPIO0_CHANNEL 11 //RTCIO_CHANNEL_11
#define RTCIO_CHANNEL_11_GPIO_NUM 0
#define RTCIO_GPIO2_CHANNEL 12 //RTCIO_CHANNEL_12
#define RTCIO_CHANNEL_12_GPIO_NUM 2
#define RTCIO_GPIO15_CHANNEL 13 //RTCIO_CHANNEL_13
#define RTCIO_CHANNEL_13_GPIO_NUM 15
#define RTCIO_GPIO13_CHANNEL 14 //RTCIO_CHANNEL_14
#define RTCIO_CHANNEL_14_GPIO_NUM 13
#define RTCIO_GPIO12_CHANNEL 15 //RTCIO_CHANNEL_15
#define RTCIO_CHANNEL_15_GPIO_NUM 12
#define RTCIO_GPIO14_CHANNEL 16 //RTCIO_CHANNEL_16
#define RTCIO_CHANNEL_16_GPIO_NUM 14
#define RTCIO_GPIO27_CHANNEL 17 //RTCIO_CHANNEL_17
#define RTCIO_CHANNEL_17_GPIO_NUM 27
#endif

1954
tools/sdk/esp32/include/soc/soc/esp32/include/soc/rtc_io_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

293
tools/sdk/esp32/include/soc/soc/esp32/include/soc/rtc_io_struct.h Normal file
View File

@ -0,0 +1,293 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_RTC_IO_STRUCT_H_
#define _SOC_RTC_IO_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct rtc_io_dev_s {
union {
struct {
uint32_t reserved0: 14;
uint32_t data:18; /*GPIO0~17 output value*/
};
uint32_t val;
} out;
union {
struct {
uint32_t reserved0: 14;
uint32_t w1ts:18; /*GPIO0~17 output value write 1 to set*/
};
uint32_t val;
} out_w1ts;
union {
struct {
uint32_t reserved0: 14;
uint32_t w1tc:18; /*GPIO0~17 output value write 1 to clear*/
};
uint32_t val;
} out_w1tc;
union {
struct {
uint32_t reserved0: 14;
uint32_t enable:18; /*GPIO0~17 output enable*/
};
uint32_t val;
} enable;
union {
struct {
uint32_t reserved0: 14;
uint32_t w1ts:18; /*GPIO0~17 output enable write 1 to set*/
};
uint32_t val;
} enable_w1ts;
union {
struct {
uint32_t reserved0: 14;
uint32_t w1tc:18; /*GPIO0~17 output enable write 1 to clear*/
};
uint32_t val;
} enable_w1tc;
union {
struct {
uint32_t reserved0: 14;
uint32_t status:18; /*GPIO0~17 interrupt status*/
};
uint32_t val;
} status;
union {
struct {
uint32_t reserved0: 14;
uint32_t w1ts:18; /*GPIO0~17 interrupt status write 1 to set*/
};
uint32_t val;
} status_w1ts;
union {
struct {
uint32_t reserved0: 14;
uint32_t w1tc:18; /*GPIO0~17 interrupt status write 1 to clear*/
};
uint32_t val;
} status_w1tc;
union {
struct {
uint32_t reserved0: 14;
uint32_t in:18; /*GPIO0~17 input value*/
};
uint32_t val;
} in_val;
union {
struct {
uint32_t reserved0: 2;
uint32_t pad_driver: 1; /*if set to 0: normal output if set to 1: open drain*/
uint32_t reserved3: 4;
uint32_t int_type: 3; /*if set to 0: GPIO interrupt disable if set to 1: rising edge trigger if set to 2: falling edge trigger if set to 3: any edge trigger if set to 4: low level trigger if set to 5: high level trigger*/
uint32_t wakeup_enable: 1; /*GPIO wake up enable only available in light sleep*/
uint32_t reserved11: 21;
};
uint32_t val;
} pin[18];
union {
struct {
uint32_t sel0: 5;
uint32_t sel1: 5;
uint32_t sel2: 5;
uint32_t sel3: 5;
uint32_t sel4: 5;
uint32_t no_gating_12m: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} debug_sel;
uint32_t dig_pad_hold; /*select the digital pad hold value.*/
union {
struct {
uint32_t reserved0: 30;
uint32_t hall_phase: 1; /*Reverse phase of hall sensor*/
uint32_t xpd_hall: 1; /*Power on hall sensor and connect to VP and VN*/
};
uint32_t val;
} hall_sens;
union {
struct {
uint32_t reserved0: 4;
uint32_t sense4_fun_ie: 1; /*the input enable of the pad*/
uint32_t sense4_slp_ie: 1; /*the input enable of the pad in sleep status*/
uint32_t sense4_slp_sel: 1; /*the sleep status selection signal of the pad*/
uint32_t sense4_fun_sel: 2; /*the functional selection signal of the pad*/
uint32_t sense3_fun_ie: 1; /*the input enable of the pad*/
uint32_t sense3_slp_ie: 1; /*the input enable of the pad in sleep status*/
uint32_t sense3_slp_sel: 1; /*the sleep status selection signal of the pad*/
uint32_t sense3_fun_sel: 2; /*the functional selection signal of the pad*/
uint32_t sense2_fun_ie: 1; /*the input enable of the pad*/
uint32_t sense2_slp_ie: 1; /*the input enable of the pad in sleep status*/
uint32_t sense2_slp_sel: 1; /*the sleep status selection signal of the pad*/
uint32_t sense2_fun_sel: 2; /*the functional selection signal of the pad*/
uint32_t sense1_fun_ie: 1; /*the input enable of the pad*/
uint32_t sense1_slp_ie: 1; /*the input enable of the pad in sleep status*/
uint32_t sense1_slp_sel: 1; /*the sleep status selection signal of the pad*/
uint32_t sense1_fun_sel: 2; /*the functional selection signal of the pad*/
uint32_t sense4_mux_sel: 1; /*<2A>1<EFBFBD> select the digital function <20>0<EFBFBD>slection the rtc function*/
uint32_t sense3_mux_sel: 1; /*<2A>1<EFBFBD> select the digital function <20>0<EFBFBD>slection the rtc function*/
uint32_t sense2_mux_sel: 1; /*<2A>1<EFBFBD> select the digital function <20>0<EFBFBD>slection the rtc function*/
uint32_t sense1_mux_sel: 1; /*<2A>1<EFBFBD> select the digital function <20>0<EFBFBD>slection the rtc function*/
uint32_t sense4_hold: 1; /*hold the current value of the output when setting the hold to <20>1<EFBFBD>*/
uint32_t sense3_hold: 1; /*hold the current value of the output when setting the hold to <20>1<EFBFBD>*/
uint32_t sense2_hold: 1; /*hold the current value of the output when setting the hold to <20>1<EFBFBD>*/
uint32_t sense1_hold: 1; /*hold the current value of the output when setting the hold to <20>1<EFBFBD>*/
};
uint32_t val;
} sensor_pads;
union {
struct {
uint32_t reserved0: 18;
uint32_t adc2_fun_ie: 1; /*the input enable of the pad*/
uint32_t adc2_slp_ie: 1; /*the input enable of the pad in sleep status*/
uint32_t adc2_slp_sel: 1; /*the sleep status selection signal of the pad*/
uint32_t adc2_fun_sel: 2; /*the functional selection signal of the pad*/
uint32_t adc1_fun_ie: 1; /*the input enable of the pad*/
uint32_t adc1_slp_ie: 1; /*the input enable of the pad in sleep status*/
uint32_t adc1_slp_sel: 1; /*the sleep status selection signal of the pad*/
uint32_t adc1_fun_sel: 2; /*the functional selection signal of the pad*/
uint32_t adc2_mux_sel: 1; /*<2A>1<EFBFBD> select the digital function <20>0<EFBFBD>slection the rtc function*/
uint32_t adc1_mux_sel: 1; /*<2A>1<EFBFBD> select the digital function <20>0<EFBFBD>slection the rtc function*/
uint32_t adc2_hold: 1; /*hold the current value of the output when setting the hold to <20>1<EFBFBD>*/
uint32_t adc1_hold: 1; /*hold the current value of the output when setting the hold to <20>1<EFBFBD>*/
};
uint32_t val;
} adc_pad;
union {
struct {
uint32_t reserved0: 10;
uint32_t dac_xpd_force: 1; /*Power on DAC1. Usually we need to tristate PDAC1 if we power on the DAC i.e. IE=0 OE=0 RDE=0 RUE=0*/
uint32_t fun_ie: 1; /*the input enable of the pad*/
uint32_t slp_oe: 1; /*the output enable of the pad in sleep status*/
uint32_t slp_ie: 1; /*the input enable of the pad in sleep status*/
uint32_t slp_sel: 1; /*the sleep status selection signal of the pad*/
uint32_t fun_sel: 2; /*the functional selection signal of the pad*/
uint32_t mux_sel: 1; /*<2A>1<EFBFBD> select the digital function <20>0<EFBFBD>slection the rtc function*/
uint32_t xpd_dac: 1; /*Power on DAC1. Usually we need to tristate PDAC1 if we power on the DAC i.e. IE=0 OE=0 RDE=0 RUE=0*/
uint32_t dac: 8; /*PAD DAC1 control code.*/
uint32_t rue: 1; /*the pull up enable of the pad*/
uint32_t rde: 1; /*the pull down enable of the pad*/
uint32_t hold: 1; /*hold the current value of the output when setting the hold to <20>1<EFBFBD>*/
uint32_t drv: 2; /*the driver strength of the pad*/
};
uint32_t val;
} pad_dac[2];
union {
struct {
uint32_t reserved0: 1;
uint32_t dbias_xtal_32k: 2; /*32K XTAL self-bias reference control.*/
uint32_t dres_xtal_32k: 2; /*32K XTAL resistor bias control.*/
uint32_t x32p_fun_ie: 1; /*the input enable of the pad*/
uint32_t x32p_slp_oe: 1; /*the output enable of the pad in sleep status*/
uint32_t x32p_slp_ie: 1; /*the input enable of the pad in sleep status*/
uint32_t x32p_slp_sel: 1; /*the sleep status selection signal of the pad*/
uint32_t x32p_fun_sel: 2; /*the functional selection signal of the pad*/
uint32_t x32n_fun_ie: 1; /*the input enable of the pad*/
uint32_t x32n_slp_oe: 1; /*the output enable of the pad in sleep status*/
uint32_t x32n_slp_ie: 1; /*the input enable of the pad in sleep status*/
uint32_t x32n_slp_sel: 1; /*the sleep status selection signal of the pad*/
uint32_t x32n_fun_sel: 2; /*the functional selection signal of the pad*/
uint32_t x32p_mux_sel: 1; /*<2A>1<EFBFBD> select the digital function <20>0<EFBFBD>slection the rtc function*/
uint32_t x32n_mux_sel: 1; /*<2A>1<EFBFBD> select the digital function <20>0<EFBFBD>slection the rtc function*/
uint32_t xpd_xtal_32k: 1; /*Power up 32kHz crystal oscillator*/
uint32_t dac_xtal_32k: 2; /*32K XTAL bias current DAC.*/
uint32_t x32p_rue: 1; /*the pull up enable of the pad*/
uint32_t x32p_rde: 1; /*the pull down enable of the pad*/
uint32_t x32p_hold: 1; /*hold the current value of the output when setting the hold to <20>1<EFBFBD>*/
uint32_t x32p_drv: 2; /*the driver strength of the pad*/
uint32_t x32n_rue: 1; /*the pull up enable of the pad*/
uint32_t x32n_rde: 1; /*the pull down enable of the pad*/
uint32_t x32n_hold: 1; /*hold the current value of the output when setting the hold to <20>1<EFBFBD>*/
uint32_t x32n_drv: 2; /*the driver strength of the pad*/
};
uint32_t val;
} xtal_32k_pad;
union {
struct {
uint32_t reserved0: 23;
uint32_t dcur: 2; /*touch sensor bias current. Should have option to tie with BIAS_SLEEP(When BIAS_SLEEP this setting is available*/
uint32_t drange: 2; /*touch sensor saw wave voltage range.*/
uint32_t drefl: 2; /*touch sensor saw wave bottom voltage.*/
uint32_t drefh: 2; /*touch sensor saw wave top voltage.*/
uint32_t xpd_bias: 1; /*touch sensor bias power on.*/
};
uint32_t val;
} touch_cfg;
union {
struct {
uint32_t reserved0: 12;
uint32_t to_gpio: 1; /*connect the rtc pad input to digital pad input <20>0<EFBFBD> is availbale GPIO4*/
uint32_t fun_ie: 1; /*the input enable of the pad*/
uint32_t slp_oe: 1; /*the output enable of the pad in sleep status*/
uint32_t slp_ie: 1; /*the input enable of the pad in sleep status*/
uint32_t slp_sel: 1; /*the sleep status selection signal of the pad*/
uint32_t fun_sel: 2; /*the functional selection signal of the pad*/
uint32_t mux_sel: 1; /*<2A>1<EFBFBD> select the digital function <20>0<EFBFBD>slection the rtc function*/
uint32_t xpd: 1; /*touch sensor power on.*/
uint32_t tie_opt: 1; /*default touch sensor tie option. 0: tie low 1: tie high.*/
uint32_t start: 1; /*start touch sensor.*/
uint32_t dac: 3; /*touch sensor slope control. 3-bit for each touch panel default 100.*/
uint32_t reserved26: 1;
uint32_t rue: 1; /*the pull up enable of the pad*/
uint32_t rde: 1; /*the pull down enable of the pad*/
uint32_t drv: 2; /*the driver strength of the pad*/
uint32_t hold: 1; /*hold the current value of the output when setting the hold to <20>1<EFBFBD>*/
};
uint32_t val;
} touch_pad[10];
union {
struct {
uint32_t reserved0: 27;
uint32_t sel: 5; /*select the wakeup source <20>0<EFBFBD> select GPIO0 <20>1<EFBFBD> select GPIO2 ...<2E>17<31> select GPIO17*/
};
uint32_t val;
} ext_wakeup0;
union {
struct {
uint32_t reserved0: 27;
uint32_t sel: 5; /*select the external xtl power source <20>0<EFBFBD> select GPIO0 <20>1<EFBFBD> select GPIO2 ...<2E>17<31> select GPIO17*/
};
uint32_t val;
} xtl_ext_ctr;
union {
struct {
uint32_t reserved0: 23;
uint32_t debug_bit_sel: 5;
uint32_t scl_sel: 2; /*<2A>0<EFBFBD> using TOUCH_PAD[0] as i2c clk <20>1<EFBFBD> using TOUCH_PAD[2] as i2c clk*/
uint32_t sda_sel: 2; /*<2A>0<EFBFBD> using TOUCH_PAD[1] as i2c sda <20>1<EFBFBD> using TOUCH_PAD[3] as i2c sda*/
};
uint32_t val;
} sar_i2c_io;
union {
struct {
uint32_t date: 28; /*date*/
uint32_t reserved28: 4;
};
uint32_t val;
} date;
} rtc_io_dev_t;
extern rtc_io_dev_t RTCIO;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_RTC_IO_STRUCT_H_ */

34
tools/sdk/esp32/include/soc/soc/esp32/include/soc/sdio_slave_pins.h Normal file
View File

@ -0,0 +1,34 @@
// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_SDIO_SLAVE_PINS_H_
#define _SOC_SDIO_SLAVE_PINS_H_
#define SDIO_SLAVE_SLOT0_IOMUX_PIN_NUM_CLK 6
#define SDIO_SLAVE_SLOT0_IOMUX_PIN_NUM_CMD 11
#define SDIO_SLAVE_SLOT0_IOMUX_PIN_NUM_D0 7
#define SDIO_SLAVE_SLOT0_IOMUX_PIN_NUM_D1 8
#define SDIO_SLAVE_SLOT0_IOMUX_PIN_NUM_D2 9
#define SDIO_SLAVE_SLOT0_IOMUX_PIN_NUM_D3 10
#define SDIO_SLAVE_SLOT0_FUNC 0
#define SDIO_SLAVE_SLOT1_IOMUX_PIN_NUM_CLK 14
#define SDIO_SLAVE_SLOT1_IOMUX_PIN_NUM_CMD 15
#define SDIO_SLAVE_SLOT1_IOMUX_PIN_NUM_D0 2
#define SDIO_SLAVE_SLOT1_IOMUX_PIN_NUM_D1 4
#define SDIO_SLAVE_SLOT1_IOMUX_PIN_NUM_D2 12
#define SDIO_SLAVE_SLOT1_IOMUX_PIN_NUM_D3 13
#define SDIO_SLAVE_SLOT1_FUNC 4
#endif /* _SOC_SDIO_SLAVE_PINS_H_ */

38
tools/sdk/esp32/include/soc/soc/esp32/include/soc/sdmmc_pins.h Normal file
View File

@ -0,0 +1,38 @@
// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_SDMMC_PINS_H_
#define _SOC_SDMMC_PINS_H_
#define SDMMC_SLOT0_IOMUX_PIN_NUM_CLK 6
#define SDMMC_SLOT0_IOMUX_PIN_NUM_CMD 11
#define SDMMC_SLOT0_IOMUX_PIN_NUM_D0 7
#define SDMMC_SLOT0_IOMUX_PIN_NUM_D1 8
#define SDMMC_SLOT0_IOMUX_PIN_NUM_D2 9
#define SDMMC_SLOT0_IOMUX_PIN_NUM_D3 10
#define SDMMC_SLOT0_IOMUX_PIN_NUM_D4 16
#define SDMMC_SLOT0_IOMUX_PIN_NUM_D5 17
#define SDMMC_SLOT0_IOMUX_PIN_NUM_D6 5
#define SDMMC_SLOT0_IOMUX_PIN_NUM_D7 18
#define SDMMC_SLOT0_FUNC 0
#define SDMMC_SLOT1_IOMUX_PIN_NUM_CLK 14
#define SDMMC_SLOT1_IOMUX_PIN_NUM_CMD 15
#define SDMMC_SLOT1_IOMUX_PIN_NUM_D0 2
#define SDMMC_SLOT1_IOMUX_PIN_NUM_D1 4
#define SDMMC_SLOT1_IOMUX_PIN_NUM_D2 12
#define SDMMC_SLOT1_IOMUX_PIN_NUM_D3 13
#define SDMMC_SLOT1_FUNC 4
#endif /* _SOC_SDMMC_PINS_H_ */

97
tools/sdk/esp32/include/soc/soc/esp32/include/soc/sdmmc_reg.h Normal file
View File

@ -0,0 +1,97 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_SDMMC_REG_H_
#define _SOC_SDMMC_REG_H_
#include "soc.h"
#define SDMMC_CTRL_REG (DR_REG_SDMMC_BASE + 0x00)
#define SDMMC_PWREN_REG (DR_REG_SDMMC_BASE + 0x04)
#define SDMMC_CLKDIV_REG (DR_REG_SDMMC_BASE + 0x08)
#define SDMMC_CLKSRC_REG (DR_REG_SDMMC_BASE + 0x0c)
#define SDMMC_CLKENA_REG (DR_REG_SDMMC_BASE + 0x10)
#define SDMMC_TMOUT_REG (DR_REG_SDMMC_BASE + 0x14)
#define SDMMC_CTYPE_REG (DR_REG_SDMMC_BASE + 0x18)
#define SDMMC_BLKSIZ_REG (DR_REG_SDMMC_BASE + 0x1c)
#define SDMMC_BYTCNT_REG (DR_REG_SDMMC_BASE + 0x20)
#define SDMMC_INTMASK_REG (DR_REG_SDMMC_BASE + 0x24)
#define SDMMC_CMDARG_REG (DR_REG_SDMMC_BASE + 0x28)
#define SDMMC_CMD_REG (DR_REG_SDMMC_BASE + 0x2c)
#define SDMMC_RESP0_REG (DR_REG_SDMMC_BASE + 0x30)
#define SDMMC_RESP1_REG (DR_REG_SDMMC_BASE + 0x34)
#define SDMMC_RESP2_REG (DR_REG_SDMMC_BASE + 0x38)
#define SDMMC_RESP3_REG (DR_REG_SDMMC_BASE + 0x3c)
#define SDMMC_MINTSTS_REG (DR_REG_SDMMC_BASE + 0x40)
#define SDMMC_RINTSTS_REG (DR_REG_SDMMC_BASE + 0x44)
#define SDMMC_STATUS_REG (DR_REG_SDMMC_BASE + 0x48)
#define SDMMC_FIFOTH_REG (DR_REG_SDMMC_BASE + 0x4c)
#define SDMMC_CDETECT_REG (DR_REG_SDMMC_BASE + 0x50)
#define SDMMC_WRTPRT_REG (DR_REG_SDMMC_BASE + 0x54)
#define SDMMC_GPIO_REG (DR_REG_SDMMC_BASE + 0x58)
#define SDMMC_TCBCNT_REG (DR_REG_SDMMC_BASE + 0x5c)
#define SDMMC_TBBCNT_REG (DR_REG_SDMMC_BASE + 0x60)
#define SDMMC_DEBNCE_REG (DR_REG_SDMMC_BASE + 0x64)
#define SDMMC_USRID_REG (DR_REG_SDMMC_BASE + 0x68)
#define SDMMC_VERID_REG (DR_REG_SDMMC_BASE + 0x6c)
#define SDMMC_HCON_REG (DR_REG_SDMMC_BASE + 0x70)
#define SDMMC_UHS_REG_REG (DR_REG_SDMMC_BASE + 0x74)
#define SDMMC_RST_N_REG (DR_REG_SDMMC_BASE + 0x78)
#define SDMMC_BMOD_REG (DR_REG_SDMMC_BASE + 0x80)
#define SDMMC_PLDMND_REG (DR_REG_SDMMC_BASE + 0x84)
#define SDMMC_DBADDR_REG (DR_REG_SDMMC_BASE + 0x88)
#define SDMMC_DBADDRU_REG (DR_REG_SDMMC_BASE + 0x8c)
#define SDMMC_IDSTS_REG (DR_REG_SDMMC_BASE + 0x8c)
#define SDMMC_IDINTEN_REG (DR_REG_SDMMC_BASE + 0x90)
#define SDMMC_DSCADDR_REG (DR_REG_SDMMC_BASE + 0x94)
#define SDMMC_DSCADDRL_REG (DR_REG_SDMMC_BASE + 0x98)
#define SDMMC_DSCADDRU_REG (DR_REG_SDMMC_BASE + 0x9c)
#define SDMMC_BUFADDRL_REG (DR_REG_SDMMC_BASE + 0xa0)
#define SDMMC_BUFADDRU_REG (DR_REG_SDMMC_BASE + 0xa4)
#define SDMMC_CARDTHRCTL_REG (DR_REG_SDMMC_BASE + 0x100)
#define SDMMC_BACK_END_POWER_REG (DR_REG_SDMMC_BASE + 0x104)
#define SDMMC_UHS_REG_EXT_REG (DR_REG_SDMMC_BASE + 0x108)
#define SDMMC_EMMC_DDR_REG_REG (DR_REG_SDMMC_BASE + 0x10c)
#define SDMMC_ENABLE_SHIFT_REG (DR_REG_SDMMC_BASE + 0x110)
#define SDMMC_CLOCK_REG (DR_REG_SDMMC_BASE + 0x800)
#define SDMMC_INTMASK_IO_SLOT1 BIT(17)
#define SDMMC_INTMASK_IO_SLOT0 BIT(16)
#define SDMMC_INTMASK_EBE BIT(15)
#define SDMMC_INTMASK_ACD BIT(14)
#define SDMMC_INTMASK_SBE BIT(13)
#define SDMMC_INTMASK_BCI BIT(13)
#define SDMMC_INTMASK_HLE BIT(12)
#define SDMMC_INTMASK_FRUN BIT(11)
#define SDMMC_INTMASK_HTO BIT(10)
#define SDMMC_INTMASK_DTO BIT(9)
#define SDMMC_INTMASK_RTO BIT(8)
#define SDMMC_INTMASK_DCRC BIT(7)
#define SDMMC_INTMASK_RCRC BIT(6)
#define SDMMC_INTMASK_RXDR BIT(5)
#define SDMMC_INTMASK_TXDR BIT(4)
#define SDMMC_INTMASK_DATA_OVER BIT(3)
#define SDMMC_INTMASK_CMD_DONE BIT(2)
#define SDMMC_INTMASK_RESP_ERR BIT(1)
#define SDMMC_INTMASK_CD BIT(0)
#define SDMMC_IDMAC_INTMASK_AI BIT(9)
#define SDMMC_IDMAC_INTMASK_NI BIT(8)
#define SDMMC_IDMAC_INTMASK_CES BIT(5)
#define SDMMC_IDMAC_INTMASK_DU BIT(4)
#define SDMMC_IDMAC_INTMASK_FBE BIT(2)
#define SDMMC_IDMAC_INTMASK_RI BIT(1)
#define SDMMC_IDMAC_INTMASK_TI BIT(0)
#endif /* _SOC_SDMMC_REG_H_ */

393
tools/sdk/esp32/include/soc/soc/esp32/include/soc/sdmmc_struct.h Normal file
View File

@ -0,0 +1,393 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_SDMMC_STRUCT_H_
#define _SOC_SDMMC_STRUCT_H_
#include <stdint.h>
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef struct sdmmc_desc_s {
uint32_t reserved1: 1;
uint32_t disable_int_on_completion: 1;
uint32_t last_descriptor: 1;
uint32_t first_descriptor: 1;
uint32_t second_address_chained: 1;
uint32_t end_of_ring: 1;
uint32_t reserved2: 24;
uint32_t card_error_summary: 1;
uint32_t owned_by_idmac: 1;
uint32_t buffer1_size: 13;
uint32_t buffer2_size: 13;
uint32_t reserved3: 6;
void* buffer1_ptr;
union {
void* buffer2_ptr;
void* next_desc_ptr;
};
} sdmmc_desc_t;
#define SDMMC_DMA_MAX_BUF_LEN 4096
_Static_assert(sizeof(sdmmc_desc_t) == 16, "invalid size of sdmmc_desc_t structure");
typedef struct sdmmc_hw_cmd_s {
uint32_t cmd_index: 6; ///< Command index
uint32_t response_expect: 1; ///< set if response is expected
uint32_t response_long: 1; ///< 0: short response expected, 1: long response expected
uint32_t check_response_crc: 1; ///< set if controller should check response CRC
uint32_t data_expected: 1; ///< 0: no data expected, 1: data expected
uint32_t rw: 1; ///< 0: read from card, 1: write to card (don't care if no data expected)
uint32_t stream_mode: 1; ///< 0: block transfer, 1: stream transfer (don't care if no data expected)
uint32_t send_auto_stop: 1; ///< set to send stop at the end of the transfer
uint32_t wait_complete: 1; ///< 0: send command at once, 1: wait for previous command to complete
uint32_t stop_abort_cmd: 1; ///< set if this is a stop or abort command intended to stop current transfer
uint32_t send_init: 1; ///< set to send init sequence (80 clocks of 1)
uint32_t card_num: 5; ///< card number
uint32_t update_clk_reg: 1; ///< 0: normal command, 1: don't send command, just update clock registers
uint32_t read_ceata: 1; ///< set if performing read from CE-ATA device
uint32_t ccs_expected: 1; ///< set if CCS is expected from CE-ATA device
uint32_t enable_boot: 1; ///< set for mandatory boot mode
uint32_t expect_boot_ack: 1; ///< when set along with enable_boot, controller expects boot ack pattern
uint32_t disable_boot: 1; ///< set to terminate boot operation (don't set along with enable_boot)
uint32_t boot_mode: 1; ///< 0: mandatory boot operation, 1: alternate boot operation
uint32_t volt_switch: 1; ///< set to enable voltage switching (for CMD11 only)
uint32_t use_hold_reg: 1; ///< clear to bypass HOLD register
uint32_t reserved: 1;
uint32_t start_command: 1; ///< Start command; once command is sent to the card, bit is cleared.
} sdmmc_hw_cmd_t; ///< command format used in cmd register; this structure is defined to make it easier to build command values
_Static_assert(sizeof(sdmmc_hw_cmd_t) == 4, "invalid size of sdmmc_cmd_t structure");
typedef volatile struct sdmmc_dev_s {
union {
struct {
uint32_t controller_reset: 1;
uint32_t fifo_reset: 1;
uint32_t dma_reset: 1;
uint32_t reserved1: 1;
uint32_t int_enable: 1;
uint32_t dma_enable: 1;
uint32_t read_wait: 1;
uint32_t send_irq_response: 1;
uint32_t abort_read_data: 1;
uint32_t send_ccsd: 1;
uint32_t send_auto_stop_ccsd: 1;
uint32_t ceata_device_interrupt_status: 1;
uint32_t reserved2: 4;
uint32_t card_voltage_a: 4;
uint32_t card_voltage_b: 4;
uint32_t enable_od_pullup: 1;
uint32_t use_internal_dma: 1;
uint32_t reserved3: 6;
};
uint32_t val;
} ctrl;
uint32_t pwren; ///< 1: enable power to card, 0: disable power to card
union {
struct {
uint32_t div0: 8; ///< 0: bypass, 1-255: divide clock by (2*div0).
uint32_t div1: 8; ///< 0: bypass, 1-255: divide clock by (2*div0).
uint32_t div2: 8; ///< 0: bypass, 1-255: divide clock by (2*div0).
uint32_t div3: 8; ///< 0: bypass, 1-255: divide clock by (2*div0).
};
uint32_t val;
} clkdiv;
union {
struct {
uint32_t card0: 2; ///< 0-3: select clock divider for card 0 among div0-div3
uint32_t card1: 2; ///< 0-3: select clock divider for card 1 among div0-div3
uint32_t reserved: 28;
};
uint32_t val;
} clksrc;
union {
struct {
uint32_t cclk_enable: 16; ///< 1: enable clock to card, 0: disable clock
uint32_t cclk_low_power: 16; ///< 1: enable clock gating when card is idle, 0: disable clock gating
};
uint32_t val;
} clkena;
union {
struct {
uint32_t response: 8; ///< response timeout, in card output clock cycles
uint32_t data: 24; ///< data read timeout, in card output clock cycles
};
uint32_t val;
} tmout;
union {
struct {
uint32_t card_width: 16; ///< one bit for each card: 0: 1-bit mode, 1: 4-bit mode
uint32_t card_width_8: 16; ///< one bit for each card: 0: not 8-bit mode (corresponding card_width bit is used), 1: 8-bit mode (card_width bit is ignored)
};
uint32_t val;
} ctype;
uint32_t blksiz: 16; ///< block size, default 0x200
uint32_t : 16;
uint32_t bytcnt; ///< number of bytes to be transferred
union {
struct {
uint32_t cd: 1; ///< Card detect interrupt enable
uint32_t re: 1; ///< Response error interrupt enable
uint32_t cmd_done: 1; ///< Command done interrupt enable
uint32_t dto: 1; ///< Data transfer over interrupt enable
uint32_t txdr: 1; ///< Transmit FIFO data request interrupt enable
uint32_t rxdr: 1; ///< Receive FIFO data request interrupt enable
uint32_t rcrc: 1; ///< Response CRC error interrupt enable
uint32_t dcrc: 1; ///< Data CRC error interrupt enable
uint32_t rto: 1; ///< Response timeout interrupt enable
uint32_t drto: 1; ///< Data read timeout interrupt enable
uint32_t hto: 1; ///< Data starvation-by-host timeout interrupt enable
uint32_t frun: 1; ///< FIFO underrun/overrun error interrupt enable
uint32_t hle: 1; ///< Hardware locked write error interrupt enable
uint32_t sbi_bci: 1; ///< Start bit error / busy clear interrupt enable
uint32_t acd: 1; ///< Auto command done interrupt enable
uint32_t ebe: 1; ///< End bit error / write no CRC interrupt enable
uint32_t sdio: 16; ///< SDIO interrupt enable
};
uint32_t val;
} intmask;
uint32_t cmdarg; ///< Command argument to be passed to card
sdmmc_hw_cmd_t cmd;
uint32_t resp[4]; ///< Response from card
union {
struct {
uint32_t cd: 1; ///< Card detect interrupt masked status
uint32_t re: 1; ///< Response error interrupt masked status
uint32_t cmd_done: 1; ///< Command done interrupt masked status
uint32_t dto: 1; ///< Data transfer over interrupt masked status
uint32_t txdr: 1; ///< Transmit FIFO data request interrupt masked status
uint32_t rxdr: 1; ///< Receive FIFO data request interrupt masked status
uint32_t rcrc: 1; ///< Response CRC error interrupt masked status
uint32_t dcrc: 1; ///< Data CRC error interrupt masked status
uint32_t rto: 1; ///< Response timeout interrupt masked status
uint32_t drto: 1; ///< Data read timeout interrupt masked status
uint32_t hto: 1; ///< Data starvation-by-host timeout interrupt masked status
uint32_t frun: 1; ///< FIFO underrun/overrun error interrupt masked status
uint32_t hle: 1; ///< Hardware locked write error interrupt masked status
uint32_t sbi_bci: 1; ///< Start bit error / busy clear interrupt masked status
uint32_t acd: 1; ///< Auto command done interrupt masked status
uint32_t ebe: 1; ///< End bit error / write no CRC interrupt masked status
uint32_t sdio: 16; ///< SDIO interrupt masked status
};
uint32_t val;
} mintsts;
union {
struct {
uint32_t cd: 1; ///< Card detect raw interrupt status
uint32_t re: 1; ///< Response error raw interrupt status
uint32_t cmd_done: 1; ///< Command done raw interrupt status
uint32_t dto: 1; ///< Data transfer over raw interrupt status
uint32_t txdr: 1; ///< Transmit FIFO data request raw interrupt status
uint32_t rxdr: 1; ///< Receive FIFO data request raw interrupt status
uint32_t rcrc: 1; ///< Response CRC error raw interrupt status
uint32_t dcrc: 1; ///< Data CRC error raw interrupt status
uint32_t rto: 1; ///< Response timeout raw interrupt status
uint32_t drto: 1; ///< Data read timeout raw interrupt status
uint32_t hto: 1; ///< Data starvation-by-host timeout raw interrupt status
uint32_t frun: 1; ///< FIFO underrun/overrun error raw interrupt status
uint32_t hle: 1; ///< Hardware locked write error raw interrupt status
uint32_t sbi_bci: 1; ///< Start bit error / busy clear raw interrupt status
uint32_t acd: 1; ///< Auto command done raw interrupt status
uint32_t ebe: 1; ///< End bit error / write no CRC raw interrupt status
uint32_t sdio: 16; ///< SDIO raw interrupt status
};
uint32_t val;
} rintsts; ///< interrupts can be cleared by writing this register
union {
struct {
uint32_t fifo_rx_watermark: 1; ///< FIFO reached receive watermark level
uint32_t fifo_tx_watermark: 1; ///< FIFO reached transmit watermark level
uint32_t fifo_empty: 1; ///< FIFO is empty
uint32_t fifo_full: 1; ///< FIFO is full
uint32_t cmd_fsm_state: 4; ///< command FSM state
uint32_t data3_status: 1; ///< this bit reads 1 if card is present
uint32_t data_busy: 1; ///< this bit reads 1 if card is busy
uint32_t data_fsm_busy: 1; ///< this bit reads 1 if transmit/receive FSM is busy
uint32_t response_index: 6; ///< index of the previous response
uint32_t fifo_count: 13; ///< number of filled locations in the FIFO
uint32_t dma_ack: 1; ///< DMA acknowledge signal
uint32_t dma_req: 1; ///< DMA request signal
};
uint32_t val;
} status;
union {
struct {
uint32_t tx_watermark: 12; ///< FIFO TX watermark level
uint32_t reserved1: 4;
uint32_t rx_watermark: 12; ///< FIFO RX watermark level
uint32_t dw_dma_mts: 3;
uint32_t reserved2: 1;
};
uint32_t val;
} fifoth;
union {
struct {
uint32_t cards: 2; ///< bit N reads 0 if card N is present
uint32_t reserved: 30;
};
uint32_t val;
} cdetect;
union {
struct {
uint32_t cards: 2; ///< bit N reads 1 if card N is write protected
uint32_t reserved: 30;
};
uint32_t val;
} wrtprt;
uint32_t gpio; ///< unused
uint32_t tcbcnt; ///< transferred (to card) byte count
uint32_t tbbcnt; ///< transferred from host to FIFO byte count
union {
struct {
uint32_t debounce_count: 24; ///< number of host cycles used by debounce filter, typical time should be 5-25ms
uint32_t reserved: 8;
};
} debnce;
uint32_t usrid; ///< user ID
uint32_t verid; ///< IP block version
uint32_t hcon; ///< compile-time IP configuration
union {
struct {
uint32_t voltage: 16; ///< voltage control for slots; no-op on ESP32.
uint32_t ddr: 16; ///< bit N enables DDR mode for card N
};
} uhs; ///< UHS related settings
union {
struct {
uint32_t cards: 2; ///< bit N resets card N, active low
uint32_t reserved: 30;
};
} rst_n;
uint32_t reserved_7c;
union {
struct {
uint32_t sw_reset: 1; ///< set to reset DMA controller
uint32_t fb: 1; ///< set if AHB master performs fixed burst transfers
uint32_t dsl: 5; ///< descriptor skip length: number of words to skip between two unchained descriptors
uint32_t enable: 1; ///< set to enable IDMAC
uint32_t pbl: 3; ///< programmable burst length
uint32_t reserved: 21;
};
uint32_t val;
} bmod;
uint32_t pldmnd; ///< set any bit to resume IDMAC FSM from suspended state
sdmmc_desc_t* dbaddr; ///< descriptor list base
union {
struct {
uint32_t ti: 1; ///< transmit interrupt status
uint32_t ri: 1; ///< receive interrupt status
uint32_t fbe: 1; ///< fatal bus error
uint32_t reserved1: 1;
uint32_t du: 1; ///< descriptor unavailable
uint32_t ces: 1; ///< card error summary
uint32_t reserved2: 2;
uint32_t nis: 1; ///< normal interrupt summary
uint32_t fbe_code: 3; ///< code of fatal bus error
uint32_t fsm: 4; ///< DMAC FSM state
uint32_t reserved3: 15;
};
uint32_t val;
} idsts;
union {
struct {
uint32_t ti: 1; ///< transmit interrupt enable
uint32_t ri: 1; ///< receive interrupt enable
uint32_t fbe: 1; ///< fatal bus error interrupt enable
uint32_t reserved1: 1;
uint32_t du: 1; ///< descriptor unavailable interrupt enable
uint32_t ces: 1; ///< card error interrupt enable
uint32_t reserved2: 2;
uint32_t ni: 1; ///< normal interrupt interrupt enable
uint32_t ai: 1; ///< abnormal interrupt enable
uint32_t reserved3: 22;
};
uint32_t val;
} idinten;
uint32_t dscaddr; ///< current host descriptor address
uint32_t dscaddrl; ///< unused
uint32_t dscaddru; ///< unused
uint32_t bufaddrl; ///< unused
uint32_t bufaddru; ///< unused
uint32_t reserved_a8[22];
union {
struct {
uint32_t read_thr_en : 1; ///< initiate transfer only if FIFO has more space than the read threshold
uint32_t busy_clr_int_en : 1; ///< enable generation of busy clear interrupts
uint32_t write_thr_en : 1; ///< equivalent of read_thr_en for writes
uint32_t reserved1 : 13;
uint32_t card_threshold : 12; ///< threshold value for reads/writes, in bytes
};
uint32_t val;
} cardthrctl;
uint32_t back_end_power;
uint32_t uhs_reg_ext;
uint32_t emmc_ddr_reg;
uint32_t enable_shift;
uint32_t reserved_114[443];
union {
struct {
uint32_t phase_dout: 3; ///< phase of data output clock (0x0: 0, 0x1: 90, 0x4: 180, 0x6: 270)
uint32_t phase_din: 3; ///< phase of data input clock
uint32_t phase_core: 3; ///< phase of the clock to SDMMC peripheral
uint32_t div_factor_p: 4; ///< controls clock period; it will be (div_factor_p + 1) / 160MHz
uint32_t div_factor_h: 4; ///< controls length of high pulse; it will be (div_factor_h + 1) / 160MHz
uint32_t div_factor_m: 4; ///< should be equal to div_factor_p
};
uint32_t val;
} clock;
} sdmmc_dev_t;
extern sdmmc_dev_t SDMMC;
_Static_assert(sizeof(sdmmc_dev_t) == 0x804, "invalid size of sdmmc_dev_t structure");
#ifdef __cplusplus
}
#endif
#endif //_SOC_SDMMC_STRUCT_H_

1068
tools/sdk/esp32/include/soc/soc/esp32/include/soc/sens_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

328
tools/sdk/esp32/include/soc/soc/esp32/include/soc/sens_struct.h Normal file
View File

@ -0,0 +1,328 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_SENS_STRUCT_H_
#define _SOC_SENS_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct sens_dev_s {
union {
struct {
uint32_t sar1_clk_div: 8;
uint32_t sar1_sample_cycle: 8;
uint32_t sar1_sample_bit: 2;
uint32_t sar1_clk_gated: 1;
uint32_t sar1_sample_num: 8;
uint32_t sar1_dig_force: 1; /*1: ADC1 is controlled by the digital controller 0: RTC controller*/
uint32_t sar1_data_inv: 1;
uint32_t reserved29: 3;
};
uint32_t val;
} sar_read_ctrl;
uint32_t sar_read_status1; /**/
union {
struct {
uint32_t sar_amp_wait1:16;
uint32_t sar_amp_wait2:16;
};
uint32_t val;
} sar_meas_wait1;
union {
struct {
uint32_t sar_amp_wait3: 16;
uint32_t force_xpd_amp: 2;
uint32_t force_xpd_sar: 2;
uint32_t sar2_rstb_wait: 8;
uint32_t reserved28: 4;
};
uint32_t val;
} sar_meas_wait2;
union {
struct {
uint32_t xpd_sar_amp_fsm: 4;
uint32_t amp_rst_fb_fsm: 4;
uint32_t amp_short_ref_fsm: 4;
uint32_t amp_short_ref_gnd_fsm: 4;
uint32_t xpd_sar_fsm: 4;
uint32_t sar_rstb_fsm: 4;
uint32_t sar2_xpd_wait: 8;
};
uint32_t val;
} sar_meas_ctrl;
uint32_t sar_read_status2; /**/
uint32_t ulp_cp_sleep_cyc0; /**/
uint32_t ulp_cp_sleep_cyc1; /**/
uint32_t ulp_cp_sleep_cyc2; /**/
uint32_t ulp_cp_sleep_cyc3; /**/
uint32_t ulp_cp_sleep_cyc4; /**/
union {
struct {
uint32_t sar1_bit_width: 2;
uint32_t sar2_bit_width: 2;
uint32_t sar2_en_test: 1;
uint32_t sar2_pwdet_cct: 3;
uint32_t ulp_cp_force_start_top: 1;
uint32_t ulp_cp_start_top: 1;
uint32_t sarclk_en: 1;
uint32_t pc_init: 11;
uint32_t sar2_stop: 1;
uint32_t sar1_stop: 1;
uint32_t sar2_pwdet_en: 1;
uint32_t reserved25: 7;
};
uint32_t val;
} sar_start_force;
union {
struct {
uint32_t mem_wr_addr_init: 11;
uint32_t mem_wr_addr_size: 11;
uint32_t rtc_mem_wr_offst_clr: 1;
uint32_t reserved23: 9;
};
uint32_t val;
} sar_mem_wr_ctrl;
uint32_t sar_atten1; /**/
uint32_t sar_atten2; /**/
union {
struct {
uint32_t i2c_slave_addr1: 11;
uint32_t i2c_slave_addr0: 11;
uint32_t meas_status: 8;
uint32_t reserved30: 2;
};
uint32_t val;
} sar_slave_addr1;
union {
struct {
uint32_t i2c_slave_addr3:11;
uint32_t i2c_slave_addr2:11;
uint32_t reserved22: 10;
};
uint32_t val;
} sar_slave_addr2;
union {
struct {
uint32_t i2c_slave_addr5:11;
uint32_t i2c_slave_addr4:11;
uint32_t tsens_out: 8;
uint32_t tsens_rdy_out: 1;
uint32_t reserved31: 1;
};
uint32_t val;
} sar_slave_addr3;
union {
struct {
uint32_t i2c_slave_addr7:11;
uint32_t i2c_slave_addr6:11;
uint32_t i2c_rdata: 8;
uint32_t i2c_done: 1;
uint32_t reserved31: 1;
};
uint32_t val;
} sar_slave_addr4;
union {
struct {
uint32_t tsens_xpd_wait: 12;
uint32_t tsens_xpd_force: 1;
uint32_t tsens_clk_inv: 1;
uint32_t tsens_clk_gated: 1;
uint32_t tsens_in_inv: 1;
uint32_t tsens_clk_div: 8;
uint32_t tsens_power_up: 1;
uint32_t tsens_power_up_force: 1;
uint32_t tsens_dump_out: 1;
uint32_t reserved27: 5;
};
uint32_t val;
} sar_tctrl;
union {
struct {
uint32_t sar_i2c_ctrl: 28;
uint32_t sar_i2c_start: 1;
uint32_t sar_i2c_start_force: 1;
uint32_t reserved30: 2;
};
uint32_t val;
} sar_i2c_ctrl;
union {
struct {
uint32_t meas1_data_sar: 16;
uint32_t meas1_done_sar: 1;
uint32_t meas1_start_sar: 1;
uint32_t meas1_start_force: 1; /*1: ADC1 is controlled by the digital or RTC controller 0: Ulp coprocessor*/
uint32_t sar1_en_pad: 12;
uint32_t sar1_en_pad_force: 1; /*1: Data ports are controlled by the digital or RTC controller 0: Ulp coprocessor*/
};
uint32_t val;
} sar_meas_start1;
union {
struct {
uint32_t touch_meas_delay:16;
uint32_t touch_xpd_wait: 8;
uint32_t touch_out_sel: 1;
uint32_t touch_out_1en: 1;
uint32_t xpd_hall_force: 1; /*1: Power of hall sensor is controlled by the digital or RTC controller 0: Ulp coprocessor*/
uint32_t hall_phase_force: 1; /*1: Phase of hall sensor is controlled by the digital or RTC controller 0: Ulp coprocessor*/
uint32_t reserved28: 4;
};
uint32_t val;
} sar_touch_ctrl1;
union {
struct {
uint32_t l_thresh: 16;
uint32_t h_thresh: 16;
};
uint32_t val;
} touch_thresh[5];
union {
struct {
uint32_t l_val: 16;
uint32_t h_val: 16;
};
uint32_t val;
} touch_meas[5];
union {
struct {
uint32_t touch_meas_en: 10;
uint32_t touch_meas_done: 1;
uint32_t touch_start_fsm_en: 1;
uint32_t touch_start_en: 1;
uint32_t touch_start_force: 1;
uint32_t touch_sleep_cycles:16;
uint32_t touch_meas_en_clr: 1;
uint32_t reserved31: 1;
};
uint32_t val;
} sar_touch_ctrl2;
uint32_t reserved_88;
union {
struct {
uint32_t touch_pad_worken:10;
uint32_t touch_pad_outen2:10;
uint32_t touch_pad_outen1:10;
uint32_t reserved30: 2;
};
uint32_t val;
} sar_touch_enable;
union {
struct {
uint32_t sar2_clk_div: 8;
uint32_t sar2_sample_cycle: 8;
uint32_t sar2_sample_bit: 2;
uint32_t sar2_clk_gated: 1;
uint32_t sar2_sample_num: 8;
uint32_t sar2_pwdet_force: 1; /*1: ADC2 is controlled by PWDET 0: digital or RTC controller*/
uint32_t sar2_dig_force: 1; /*1: ADC2 is controlled by the digital controller 0: RTC controller*/
uint32_t sar2_data_inv: 1;
uint32_t reserved30: 2;
};
uint32_t val;
} sar_read_ctrl2;
union {
struct {
uint32_t meas2_data_sar: 16;
uint32_t meas2_done_sar: 1;
uint32_t meas2_start_sar: 1;
uint32_t meas2_start_force: 1; /*1: ADC2 is controlled by the digital or RTC controller 0: Ulp coprocessor*/
uint32_t sar2_en_pad: 12;
uint32_t sar2_en_pad_force: 1; /*1: Data ports are controlled by the digital or RTC controller 0: Ulp coprocessor*/
};
uint32_t val;
} sar_meas_start2;
union {
struct {
uint32_t sw_fstep: 16;
uint32_t sw_tone_en: 1;
uint32_t debug_bit_sel: 5;
uint32_t dac_dig_force: 1;
uint32_t dac_clk_force_low: 1;
uint32_t dac_clk_force_high: 1;
uint32_t dac_clk_inv: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} sar_dac_ctrl1;
union {
struct {
uint32_t dac_dc1: 8;
uint32_t dac_dc2: 8;
uint32_t dac_scale1: 2;
uint32_t dac_scale2: 2;
uint32_t dac_inv1: 2;
uint32_t dac_inv2: 2;
uint32_t dac_cw_en1: 1;
uint32_t dac_cw_en2: 1;
uint32_t reserved26: 6;
};
uint32_t val;
} sar_dac_ctrl2;
union {
struct {
uint32_t sar1_dac_xpd_fsm: 4;
uint32_t sar1_dac_xpd_fsm_idle: 1;
uint32_t xpd_sar_amp_fsm_idle: 1;
uint32_t amp_rst_fb_fsm_idle: 1;
uint32_t amp_short_ref_fsm_idle: 1;
uint32_t amp_short_ref_gnd_fsm_idle: 1;
uint32_t xpd_sar_fsm_idle: 1;
uint32_t sar_rstb_fsm_idle: 1;
uint32_t sar2_rstb_force: 2;
uint32_t amp_rst_fb_force: 2;
uint32_t amp_short_ref_force: 2;
uint32_t amp_short_ref_gnd_force: 2;
uint32_t reserved19: 13;
};
uint32_t val;
} sar_meas_ctrl2;
uint32_t reserved_a4;
uint32_t reserved_a8;
uint32_t reserved_ac;
uint32_t reserved_b0;
uint32_t reserved_b4;
uint32_t reserved_b8;
uint32_t reserved_bc;
uint32_t reserved_c0;
uint32_t reserved_c4;
uint32_t reserved_c8;
uint32_t reserved_cc;
uint32_t reserved_d0;
uint32_t reserved_d4;
uint32_t reserved_d8;
uint32_t reserved_dc;
uint32_t reserved_e0;
uint32_t reserved_e4;
uint32_t reserved_e8;
uint32_t reserved_ec;
uint32_t reserved_f0;
uint32_t reserved_f4;
uint32_t sar_nouse; /**/
union {
struct {
uint32_t sar_date: 28;
uint32_t reserved28: 4;
};
uint32_t val;
} sardate;
} sens_dev_t;
extern sens_dev_t SENS;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_SENS_STRUCT_H_ */

37
tools/sdk/esp32/include/soc/soc/esp32/include/soc/sigmadelta_caps.h Normal file
View File

@ -0,0 +1,37 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
// ESP32 have 1 SIGMADELTA peripheral.
#define SIGMADELTA_PORT_0 (0) /*!< SIGMADELTA port 0 */
#define SIGMADELTA_PORT_MAX (1) /*!< SIGMADELTA port max */
#define SOC_SIGMADELTA_NUM (SIGMADELTA_PORT_MAX)
#define SIGMADELTA_CHANNEL_0 (0) /*!< Sigma-delta channel 0 */
#define SIGMADELTA_CHANNEL_1 (1) /*!< Sigma-delta channel 1 */
#define SIGMADELTA_CHANNEL_2 (2) /*!< Sigma-delta channel 2 */
#define SIGMADELTA_CHANNEL_3 (3) /*!< Sigma-delta channel 3 */
#define SIGMADELTA_CHANNEL_4 (4) /*!< Sigma-delta channel 4 */
#define SIGMADELTA_CHANNEL_5 (5) /*!< Sigma-delta channel 5 */
#define SIGMADELTA_CHANNEL_6 (6) /*!< Sigma-delta channel 6 */
#define SIGMADELTA_CHANNEL_7 (7) /*!< Sigma-delta channel 7 */
#define SIGMADELTA_CHANNEL_MAX (8)
#ifdef __cplusplus
}
#endif

3244
tools/sdk/esp32/include/soc/soc/esp32/include/soc/slc_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

860
tools/sdk/esp32/include/soc/soc/esp32/include/soc/slc_struct.h Normal file
View File

@ -0,0 +1,860 @@
// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_SLC_STRUCT_H_
#define _SOC_SLC_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct slc_dev_s {
union {
struct {
uint32_t slc0_tx_rst: 1;
uint32_t slc0_rx_rst: 1;
uint32_t ahbm_fifo_rst: 1;
uint32_t ahbm_rst: 1;
uint32_t slc0_tx_loop_test: 1;
uint32_t slc0_rx_loop_test: 1;
uint32_t slc0_rx_auto_wrback: 1;
uint32_t slc0_rx_no_restart_clr: 1;
uint32_t slc0_rxdscr_burst_en: 1;
uint32_t slc0_rxdata_burst_en: 1;
uint32_t slc0_rxlink_auto_ret: 1;
uint32_t slc0_txlink_auto_ret: 1;
uint32_t slc0_txdscr_burst_en: 1;
uint32_t slc0_txdata_burst_en: 1;
uint32_t slc0_token_auto_clr: 1;
uint32_t slc0_token_sel: 1;
uint32_t slc1_tx_rst: 1;
uint32_t slc1_rx_rst: 1;
uint32_t slc0_wr_retry_mask_en: 1;
uint32_t slc1_wr_retry_mask_en: 1;
uint32_t slc1_tx_loop_test: 1;
uint32_t slc1_rx_loop_test: 1;
uint32_t slc1_rx_auto_wrback: 1;
uint32_t slc1_rx_no_restart_clr: 1;
uint32_t slc1_rxdscr_burst_en: 1;
uint32_t slc1_rxdata_burst_en: 1;
uint32_t slc1_rxlink_auto_ret: 1;
uint32_t slc1_txlink_auto_ret: 1;
uint32_t slc1_txdscr_burst_en: 1;
uint32_t slc1_txdata_burst_en: 1;
uint32_t slc1_token_auto_clr: 1;
uint32_t slc1_token_sel: 1;
};
uint32_t val;
} conf0;
union {
struct {
uint32_t frhost_bit0: 1;
uint32_t frhost_bit1: 1;
uint32_t frhost_bit2: 1;
uint32_t frhost_bit3: 1;
uint32_t frhost_bit4: 1;
uint32_t frhost_bit5: 1;
uint32_t frhost_bit6: 1;
uint32_t frhost_bit7: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t tx_done: 1;
uint32_t tx_suc_eof: 1;
uint32_t rx_done: 1;
uint32_t rx_eof: 1;
uint32_t tohost: 1;
uint32_t tx_dscr_err: 1;
uint32_t rx_dscr_err: 1;
uint32_t tx_dscr_empty: 1;
uint32_t host_rd_ack: 1;
uint32_t wr_retry_done: 1;
uint32_t tx_err_eof: 1;
uint32_t cmd_dtc: 1;
uint32_t rx_quick_eof: 1;
uint32_t reserved27: 5;
};
uint32_t val;
} slc0_int_raw;
union {
struct {
uint32_t frhost_bit0: 1;
uint32_t frhost_bit1: 1;
uint32_t frhost_bit2: 1;
uint32_t frhost_bit3: 1;
uint32_t frhost_bit4: 1;
uint32_t frhost_bit5: 1;
uint32_t frhost_bit6: 1;
uint32_t frhost_bit7: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t tx_done: 1;
uint32_t tx_suc_eof: 1;
uint32_t rx_done: 1;
uint32_t rx_eof: 1;
uint32_t tohost: 1;
uint32_t tx_dscr_err: 1;
uint32_t rx_dscr_err: 1;
uint32_t tx_dscr_empty: 1;
uint32_t host_rd_ack: 1;
uint32_t wr_retry_done: 1;
uint32_t tx_err_eof: 1;
uint32_t cmd_dtc: 1;
uint32_t rx_quick_eof: 1;
uint32_t reserved27: 5;
};
uint32_t val;
} slc0_int_st;
union {
struct {
uint32_t frhost_bit0: 1;
uint32_t frhost_bit1: 1;
uint32_t frhost_bit2: 1;
uint32_t frhost_bit3: 1;
uint32_t frhost_bit4: 1;
uint32_t frhost_bit5: 1;
uint32_t frhost_bit6: 1;
uint32_t frhost_bit7: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t tx_done: 1;
uint32_t tx_suc_eof: 1;
uint32_t rx_done: 1;
uint32_t rx_eof: 1;
uint32_t tohost: 1;
uint32_t tx_dscr_err: 1;
uint32_t rx_dscr_err: 1;
uint32_t tx_dscr_empty: 1;
uint32_t host_rd_ack: 1;
uint32_t wr_retry_done: 1;
uint32_t tx_err_eof: 1;
uint32_t cmd_dtc: 1;
uint32_t rx_quick_eof: 1;
uint32_t reserved27: 5;
};
uint32_t val;
} slc0_int_ena;
union {
struct {
uint32_t frhost_bit0: 1;
uint32_t frhost_bit1: 1;
uint32_t frhost_bit2: 1;
uint32_t frhost_bit3: 1;
uint32_t frhost_bit4: 1;
uint32_t frhost_bit5: 1;
uint32_t frhost_bit6: 1;
uint32_t frhost_bit7: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t tx_done: 1;
uint32_t tx_suc_eof: 1;
uint32_t rx_done: 1;
uint32_t rx_eof: 1;
uint32_t tohost: 1;
uint32_t tx_dscr_err: 1;
uint32_t rx_dscr_err: 1;
uint32_t tx_dscr_empty: 1;
uint32_t host_rd_ack: 1;
uint32_t wr_retry_done: 1;
uint32_t tx_err_eof: 1;
uint32_t cmd_dtc: 1;
uint32_t rx_quick_eof: 1;
uint32_t reserved27: 5;
};
uint32_t val;
} slc0_int_clr;
union {
struct {
uint32_t frhost_bit8: 1;
uint32_t frhost_bit9: 1;
uint32_t frhost_bit10: 1;
uint32_t frhost_bit11: 1;
uint32_t frhost_bit12: 1;
uint32_t frhost_bit13: 1;
uint32_t frhost_bit14: 1;
uint32_t frhost_bit15: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t tx_done: 1;
uint32_t tx_suc_eof: 1;
uint32_t rx_done: 1;
uint32_t rx_eof: 1;
uint32_t tohost: 1;
uint32_t tx_dscr_err: 1;
uint32_t rx_dscr_err: 1;
uint32_t tx_dscr_empty: 1;
uint32_t host_rd_ack: 1;
uint32_t wr_retry_done: 1;
uint32_t tx_err_eof: 1;
uint32_t reserved25: 7;
};
uint32_t val;
} slc1_int_raw;
union {
struct {
uint32_t frhost_bit8: 1;
uint32_t frhost_bit9: 1;
uint32_t frhost_bit10: 1;
uint32_t frhost_bit11: 1;
uint32_t frhost_bit12: 1;
uint32_t frhost_bit13: 1;
uint32_t frhost_bit14: 1;
uint32_t frhost_bit15: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t tx_done: 1;
uint32_t tx_suc_eof: 1;
uint32_t rx_done: 1;
uint32_t rx_eof: 1;
uint32_t tohost: 1;
uint32_t tx_dscr_err: 1;
uint32_t rx_dscr_err: 1;
uint32_t tx_dscr_empty: 1;
uint32_t host_rd_ack: 1;
uint32_t wr_retry_done: 1;
uint32_t tx_err_eof: 1;
uint32_t reserved25: 7;
};
uint32_t val;
} slc1_int_st;
union {
struct {
uint32_t frhost_bit8: 1;
uint32_t frhost_bit9: 1;
uint32_t frhost_bit10: 1;
uint32_t frhost_bit11: 1;
uint32_t frhost_bit12: 1;
uint32_t frhost_bit13: 1;
uint32_t frhost_bit14: 1;
uint32_t frhost_bit15: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t tx_done: 1;
uint32_t tx_suc_eof: 1;
uint32_t rx_done: 1;
uint32_t rx_eof: 1;
uint32_t tohost: 1;
uint32_t tx_dscr_err: 1;
uint32_t rx_dscr_err: 1;
uint32_t tx_dscr_empty: 1;
uint32_t host_rd_ack: 1;
uint32_t wr_retry_done: 1;
uint32_t tx_err_eof: 1;
uint32_t reserved25: 7;
};
uint32_t val;
} slc1_int_ena;
union {
struct {
uint32_t frhost_bit8: 1;
uint32_t frhost_bit9: 1;
uint32_t frhost_bit10: 1;
uint32_t frhost_bit11: 1;
uint32_t frhost_bit12: 1;
uint32_t frhost_bit13: 1;
uint32_t frhost_bit14: 1;
uint32_t frhost_bit15: 1;
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_udf: 1;
uint32_t tx_ovf: 1;
uint32_t token0_1to0: 1;
uint32_t token1_1to0: 1;
uint32_t tx_done: 1;
uint32_t tx_suc_eof: 1;
uint32_t rx_done: 1;
uint32_t rx_eof: 1;
uint32_t tohost: 1;
uint32_t tx_dscr_err: 1;
uint32_t rx_dscr_err: 1;
uint32_t tx_dscr_empty: 1;
uint32_t host_rd_ack: 1;
uint32_t wr_retry_done: 1;
uint32_t tx_err_eof: 1;
uint32_t reserved25: 7;
};
uint32_t val;
} slc1_int_clr;
union {
struct {
uint32_t slc0_rx_full: 1;
uint32_t slc0_rx_empty: 1;
uint32_t reserved2: 14;
uint32_t slc1_rx_full: 1;
uint32_t slc1_rx_empty: 1;
uint32_t reserved18:14;
};
uint32_t val;
} rx_status;
union {
struct {
uint32_t rxfifo_wdata: 9;
uint32_t reserved9: 7;
uint32_t rxfifo_push: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} slc0_rxfifo_push;
union {
struct {
uint32_t rxfifo_wdata: 9;
uint32_t reserved9: 7;
uint32_t rxfifo_push: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} slc1_rxfifo_push;
union {
struct {
uint32_t slc0_tx_full: 1;
uint32_t slc0_tx_empty: 1;
uint32_t reserved2: 14;
uint32_t slc1_tx_full: 1;
uint32_t slc1_tx_empty: 1;
uint32_t reserved18:14;
};
uint32_t val;
} tx_status;
union {
struct {
uint32_t txfifo_rdata: 11;
uint32_t reserved11: 5;
uint32_t txfifo_pop: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} slc0_txfifo_pop;
union {
struct {
uint32_t txfifo_rdata: 11;
uint32_t reserved11: 5;
uint32_t txfifo_pop: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} slc1_txfifo_pop;
union {
struct {
uint32_t addr: 20;
uint32_t reserved20: 8;
uint32_t stop: 1;
uint32_t start: 1;
uint32_t restart: 1;
uint32_t park: 1;
};
uint32_t val;
} slc0_rx_link;
union {
struct {
uint32_t addr: 20;
uint32_t reserved20: 8;
uint32_t stop: 1;
uint32_t start: 1;
uint32_t restart: 1;
uint32_t park: 1;
};
uint32_t val;
} slc0_tx_link;
union {
struct {
uint32_t addr: 20;
uint32_t bt_packet: 1;
uint32_t reserved21: 7;
uint32_t stop: 1;
uint32_t start: 1;
uint32_t restart: 1;
uint32_t park: 1;
};
uint32_t val;
} slc1_rx_link;
union {
struct {
uint32_t addr: 20;
uint32_t reserved20: 8;
uint32_t stop: 1;
uint32_t start: 1;
uint32_t restart: 1;
uint32_t park: 1;
};
uint32_t val;
} slc1_tx_link;
union {
struct {
uint32_t slc0_intvec: 8;
uint32_t reserved8: 8;
uint32_t slc1_intvec: 8;
uint32_t reserved24: 8;
};
uint32_t val;
} intvec_tohost;
union {
struct {
uint32_t wdata: 12;
uint32_t wr: 1;
uint32_t inc: 1;
uint32_t inc_more: 1;
uint32_t reserved15: 1;
uint32_t token0: 12;
uint32_t reserved28: 4;
};
uint32_t val;
} slc0_token0;
union {
struct {
uint32_t wdata: 12;
uint32_t wr: 1;
uint32_t inc: 1;
uint32_t inc_more: 1;
uint32_t reserved15: 1;
uint32_t token1: 12;
uint32_t reserved28: 4;
};
uint32_t val;
} slc0_token1;
union {
struct {
uint32_t wdata: 12;
uint32_t wr: 1;
uint32_t inc: 1;
uint32_t inc_more: 1;
uint32_t reserved15: 1;
uint32_t token0: 12;
uint32_t reserved28: 4;
};
uint32_t val;
} slc1_token0;
union {
struct {
uint32_t wdata: 12;
uint32_t wr: 1;
uint32_t inc: 1;
uint32_t inc_more: 1;
uint32_t reserved15: 1;
uint32_t token1: 12;
uint32_t reserved28: 4;
};
uint32_t val;
} slc1_token1;
union {
struct {
uint32_t slc0_check_owner: 1;
uint32_t slc0_tx_check_sum_en: 1;
uint32_t slc0_rx_check_sum_en: 1;
uint32_t cmd_hold_en: 1;
uint32_t slc0_len_auto_clr: 1;
uint32_t slc0_tx_stitch_en: 1;
uint32_t slc0_rx_stitch_en: 1;
uint32_t reserved7: 9;
uint32_t slc1_check_owner: 1;
uint32_t slc1_tx_check_sum_en: 1;
uint32_t slc1_rx_check_sum_en: 1;
uint32_t host_int_level_sel: 1;
uint32_t slc1_tx_stitch_en: 1;
uint32_t slc1_rx_stitch_en: 1;
uint32_t clk_en: 1;
uint32_t reserved23: 9;
};
uint32_t val;
} conf1;
uint32_t slc0_state0; /**/
uint32_t slc0_state1; /**/
uint32_t slc1_state0; /**/
uint32_t slc1_state1; /**/
union {
struct {
uint32_t txeof_ena: 6;
uint32_t reserved6: 2;
uint32_t fifo_map_ena: 4;
uint32_t slc0_tx_dummy_mode: 1;
uint32_t hda_map_128k: 1;
uint32_t slc1_tx_dummy_mode: 1;
uint32_t reserved15: 1;
uint32_t tx_push_idle_num:16;
};
uint32_t val;
} bridge_conf;
uint32_t slc0_to_eof_des_addr; /**/
uint32_t slc0_tx_eof_des_addr; /**/
uint32_t slc0_to_eof_bfr_des_addr; /**/
uint32_t slc1_to_eof_des_addr; /**/
uint32_t slc1_tx_eof_des_addr; /**/
uint32_t slc1_to_eof_bfr_des_addr; /**/
union {
struct {
uint32_t mode: 3;
uint32_t reserved3: 1;
uint32_t addr: 2;
uint32_t reserved6: 26;
};
uint32_t val;
} ahb_test;
union {
struct {
uint32_t cmd_st: 3;
uint32_t reserved3: 1;
uint32_t func_st: 4;
uint32_t sdio_wakeup: 1;
uint32_t reserved9: 3;
uint32_t bus_st: 3;
uint32_t reserved15: 1;
uint32_t func1_acc_state: 5;
uint32_t reserved21: 3;
uint32_t func2_acc_state: 5;
uint32_t reserved29: 3;
};
uint32_t val;
} sdio_st;
union {
struct {
uint32_t slc0_token_no_replace: 1;
uint32_t slc0_infor_no_replace: 1;
uint32_t slc0_rx_fill_mode: 1;
uint32_t slc0_rx_eof_mode: 1;
uint32_t slc0_rx_fill_en: 1;
uint32_t slc0_rd_retry_threshold:11;
uint32_t slc1_token_no_replace: 1;
uint32_t slc1_infor_no_replace: 1;
uint32_t slc1_rx_fill_mode: 1;
uint32_t slc1_rx_eof_mode: 1;
uint32_t slc1_rx_fill_en: 1;
uint32_t slc1_rd_retry_threshold:11;
};
uint32_t val;
} rx_dscr_conf;
uint32_t slc0_txlink_dscr; /**/
uint32_t slc0_txlink_dscr_bf0; /**/
uint32_t slc0_txlink_dscr_bf1; /**/
uint32_t slc0_rxlink_dscr; /**/
uint32_t slc0_rxlink_dscr_bf0; /**/
uint32_t slc0_rxlink_dscr_bf1; /**/
uint32_t slc1_txlink_dscr; /**/
uint32_t slc1_txlink_dscr_bf0; /**/
uint32_t slc1_txlink_dscr_bf1; /**/
uint32_t slc1_rxlink_dscr; /**/
uint32_t slc1_rxlink_dscr_bf0; /**/
uint32_t slc1_rxlink_dscr_bf1; /**/
uint32_t slc0_tx_erreof_des_addr; /**/
uint32_t slc1_tx_erreof_des_addr; /**/
union {
struct {
uint32_t slc0_token:12;
uint32_t reserved12: 4;
uint32_t slc1_token:12;
uint32_t reserved28: 4;
};
uint32_t val;
} token_lat;
union {
struct {
uint32_t wr_retry_threshold:11;
uint32_t reserved11: 21;
};
uint32_t val;
} tx_dscr_conf;
uint32_t cmd_infor0; /**/
uint32_t cmd_infor1; /**/
union {
struct {
uint32_t len_wdata: 20;
uint32_t len_wr: 1;
uint32_t len_inc: 1;
uint32_t len_inc_more: 1;
uint32_t rx_packet_load_en: 1;
uint32_t tx_packet_load_en: 1;
uint32_t rx_get_used_dscr: 1;
uint32_t tx_get_used_dscr: 1;
uint32_t rx_new_pkt_ind: 1;
uint32_t tx_new_pkt_ind: 1;
uint32_t reserved29: 3;
};
uint32_t val;
} slc0_len_conf;
union {
struct {
uint32_t len: 20;
uint32_t reserved20:12;
};
uint32_t val;
} slc0_length;
uint32_t slc0_txpkt_h_dscr; /**/
uint32_t slc0_txpkt_e_dscr; /**/
uint32_t slc0_rxpkt_h_dscr; /**/
uint32_t slc0_rxpkt_e_dscr; /**/
uint32_t slc0_txpktu_h_dscr; /**/
uint32_t slc0_txpktu_e_dscr; /**/
uint32_t slc0_rxpktu_h_dscr; /**/
uint32_t slc0_rxpktu_e_dscr; /**/
uint32_t reserved_10c;
uint32_t reserved_110;
union {
struct {
uint32_t slc0_position: 8;
uint32_t slc1_position: 8;
uint32_t reserved16: 16;
};
uint32_t val;
} seq_position;
union {
struct {
uint32_t rx_dscr_rec_lim: 10;
uint32_t reserved10: 22;
};
uint32_t val;
} slc0_dscr_rec_conf;
union {
struct {
uint32_t dat0_crc_err_cnt: 8;
uint32_t dat1_crc_err_cnt: 8;
uint32_t dat2_crc_err_cnt: 8;
uint32_t dat3_crc_err_cnt: 8;
};
uint32_t val;
} sdio_crc_st0;
union {
struct {
uint32_t cmd_crc_err_cnt: 8;
uint32_t reserved8: 23;
uint32_t err_cnt_clr: 1;
};
uint32_t val;
} sdio_crc_st1;
uint32_t slc0_eof_start_des; /**/
uint32_t slc0_push_dscr_addr; /**/
uint32_t slc0_done_dscr_addr; /**/
uint32_t slc0_sub_start_des; /**/
union {
struct {
uint32_t rx_dscr_cnt_lat: 10;
uint32_t reserved10: 6;
uint32_t rx_get_eof_occ: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} slc0_dscr_cnt;
union {
struct {
uint32_t len_lim: 20;
uint32_t reserved20:12;
};
uint32_t val;
} slc0_len_lim_conf;
union {
struct {
uint32_t frhost_bit01: 1;
uint32_t frhost_bit11: 1;
uint32_t frhost_bit21: 1;
uint32_t frhost_bit31: 1;
uint32_t frhost_bit41: 1;
uint32_t frhost_bit51: 1;
uint32_t frhost_bit61: 1;
uint32_t frhost_bit71: 1;
uint32_t rx_start1: 1;
uint32_t tx_start1: 1;
uint32_t rx_udf1: 1;
uint32_t tx_ovf1: 1;
uint32_t token0_1to01: 1;
uint32_t token1_1to01: 1;
uint32_t tx_done1: 1;
uint32_t tx_suc_eof1: 1;
uint32_t rx_done1: 1;
uint32_t rx_eof1: 1;
uint32_t tohost1: 1;
uint32_t tx_dscr_err1: 1;
uint32_t rx_dscr_err1: 1;
uint32_t tx_dscr_empty1: 1;
uint32_t host_rd_ack1: 1;
uint32_t wr_retry_done1: 1;
uint32_t tx_err_eof1: 1;
uint32_t cmd_dtc1: 1;
uint32_t rx_quick_eof1: 1;
uint32_t reserved27: 5;
};
uint32_t val;
} slc0_int_st1;
union {
struct {
uint32_t frhost_bit01: 1;
uint32_t frhost_bit11: 1;
uint32_t frhost_bit21: 1;
uint32_t frhost_bit31: 1;
uint32_t frhost_bit41: 1;
uint32_t frhost_bit51: 1;
uint32_t frhost_bit61: 1;
uint32_t frhost_bit71: 1;
uint32_t rx_start1: 1;
uint32_t tx_start1: 1;
uint32_t rx_udf1: 1;
uint32_t tx_ovf1: 1;
uint32_t token0_1to01: 1;
uint32_t token1_1to01: 1;
uint32_t tx_done1: 1;
uint32_t tx_suc_eof1: 1;
uint32_t rx_done1: 1;
uint32_t rx_eof1: 1;
uint32_t tohost1: 1;
uint32_t tx_dscr_err1: 1;
uint32_t rx_dscr_err1: 1;
uint32_t tx_dscr_empty1: 1;
uint32_t host_rd_ack1: 1;
uint32_t wr_retry_done1: 1;
uint32_t tx_err_eof1: 1;
uint32_t cmd_dtc1: 1;
uint32_t rx_quick_eof1: 1;
uint32_t reserved27: 5;
};
uint32_t val;
} slc0_int_ena1;
union {
struct {
uint32_t frhost_bit81: 1;
uint32_t frhost_bit91: 1;
uint32_t frhost_bit101: 1;
uint32_t frhost_bit111: 1;
uint32_t frhost_bit121: 1;
uint32_t frhost_bit131: 1;
uint32_t frhost_bit141: 1;
uint32_t frhost_bit151: 1;
uint32_t rx_start1: 1;
uint32_t tx_start1: 1;
uint32_t rx_udf1: 1;
uint32_t tx_ovf1: 1;
uint32_t token0_1to01: 1;
uint32_t token1_1to01: 1;
uint32_t tx_done1: 1;
uint32_t tx_suc_eof1: 1;
uint32_t rx_done1: 1;
uint32_t rx_eof1: 1;
uint32_t tohost1: 1;
uint32_t tx_dscr_err1: 1;
uint32_t rx_dscr_err1: 1;
uint32_t tx_dscr_empty1: 1;
uint32_t host_rd_ack1: 1;
uint32_t wr_retry_done1: 1;
uint32_t tx_err_eof1: 1;
uint32_t reserved25: 7;
};
uint32_t val;
} slc1_int_st1;
union {
struct {
uint32_t frhost_bit81: 1;
uint32_t frhost_bit91: 1;
uint32_t frhost_bit101: 1;
uint32_t frhost_bit111: 1;
uint32_t frhost_bit121: 1;
uint32_t frhost_bit131: 1;
uint32_t frhost_bit141: 1;
uint32_t frhost_bit151: 1;
uint32_t rx_start1: 1;
uint32_t tx_start1: 1;
uint32_t rx_udf1: 1;
uint32_t tx_ovf1: 1;
uint32_t token0_1to01: 1;
uint32_t token1_1to01: 1;
uint32_t tx_done1: 1;
uint32_t tx_suc_eof1: 1;
uint32_t rx_done1: 1;
uint32_t rx_eof1: 1;
uint32_t tohost1: 1;
uint32_t tx_dscr_err1: 1;
uint32_t rx_dscr_err1: 1;
uint32_t tx_dscr_empty1: 1;
uint32_t host_rd_ack1: 1;
uint32_t wr_retry_done1: 1;
uint32_t tx_err_eof1: 1;
uint32_t reserved25: 7;
};
uint32_t val;
} slc1_int_ena1;
uint32_t reserved_14c;
uint32_t reserved_150;
uint32_t reserved_154;
uint32_t reserved_158;
uint32_t reserved_15c;
uint32_t reserved_160;
uint32_t reserved_164;
uint32_t reserved_168;
uint32_t reserved_16c;
uint32_t reserved_170;
uint32_t reserved_174;
uint32_t reserved_178;
uint32_t reserved_17c;
uint32_t reserved_180;
uint32_t reserved_184;
uint32_t reserved_188;
uint32_t reserved_18c;
uint32_t reserved_190;
uint32_t reserved_194;
uint32_t reserved_198;
uint32_t reserved_19c;
uint32_t reserved_1a0;
uint32_t reserved_1a4;
uint32_t reserved_1a8;
uint32_t reserved_1ac;
uint32_t reserved_1b0;
uint32_t reserved_1b4;
uint32_t reserved_1b8;
uint32_t reserved_1bc;
uint32_t reserved_1c0;
uint32_t reserved_1c4;
uint32_t reserved_1c8;
uint32_t reserved_1cc;
uint32_t reserved_1d0;
uint32_t reserved_1d4;
uint32_t reserved_1d8;
uint32_t reserved_1dc;
uint32_t reserved_1e0;
uint32_t reserved_1e4;
uint32_t reserved_1e8;
uint32_t reserved_1ec;
uint32_t reserved_1f0;
uint32_t reserved_1f4;
uint32_t date; /**/
uint32_t id; /**/
} slc_dev_t;
extern slc_dev_t SLC;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_SLC_STRUCT_H_ */

415
tools/sdk/esp32/include/soc/soc/esp32/include/soc/soc.h Normal file
View File

@ -0,0 +1,415 @@
// Copyright 2010-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _ESP32_SOC_H_
#define _ESP32_SOC_H_
#ifndef __ASSEMBLER__
#include <stdint.h>
#include "esp_assert.h"
#endif
#include <esp_bit_defs.h>
#define PRO_CPU_NUM (0)
#define APP_CPU_NUM (1)
#define SOC_MAX_CONTIGUOUS_RAM_SIZE 0x400000 ///< Largest span of contiguous memory (DRAM or IRAM) in the address space
#define DR_REG_DPORT_BASE 0x3ff00000
#define DR_REG_AES_BASE 0x3ff01000
#define DR_REG_RSA_BASE 0x3ff02000
#define DR_REG_SHA_BASE 0x3ff03000
#define DR_REG_FLASH_MMU_TABLE_PRO 0x3ff10000
#define DR_REG_FLASH_MMU_TABLE_APP 0x3ff12000
#define DR_REG_DPORT_END 0x3ff13FFC
#define DR_REG_UART_BASE 0x3ff40000
#define DR_REG_SPI1_BASE 0x3ff42000
#define DR_REG_SPI0_BASE 0x3ff43000
#define DR_REG_GPIO_BASE 0x3ff44000
#define DR_REG_GPIO_SD_BASE 0x3ff44f00
#define DR_REG_FE2_BASE 0x3ff45000
#define DR_REG_FE_BASE 0x3ff46000
#define DR_REG_FRC_TIMER_BASE 0x3ff47000
#define DR_REG_RTCCNTL_BASE 0x3ff48000
#define DR_REG_RTCIO_BASE 0x3ff48400
#define DR_REG_SENS_BASE 0x3ff48800
#define DR_REG_RTC_I2C_BASE 0x3ff48C00
#define DR_REG_IO_MUX_BASE 0x3ff49000
#define DR_REG_HINF_BASE 0x3ff4B000
#define DR_REG_UHCI1_BASE 0x3ff4C000
#define DR_REG_I2S_BASE 0x3ff4F000
#define DR_REG_UART1_BASE 0x3ff50000
#define DR_REG_BT_BASE 0x3ff51000
#define DR_REG_I2C_EXT_BASE 0x3ff53000
#define DR_REG_UHCI0_BASE 0x3ff54000
#define DR_REG_SLCHOST_BASE 0x3ff55000
#define DR_REG_RMT_BASE 0x3ff56000
#define DR_REG_PCNT_BASE 0x3ff57000
#define DR_REG_SLC_BASE 0x3ff58000
#define DR_REG_LEDC_BASE 0x3ff59000
#define DR_REG_EFUSE_BASE 0x3ff5A000
#define DR_REG_SPI_ENCRYPT_BASE 0x3ff5B000
#define DR_REG_NRX_BASE 0x3ff5CC00
#define DR_REG_BB_BASE 0x3ff5D000
#define DR_REG_PWM_BASE 0x3ff5E000
#define DR_REG_TIMERGROUP0_BASE 0x3ff5F000
#define DR_REG_TIMERGROUP1_BASE 0x3ff60000
#define DR_REG_RTCMEM0_BASE 0x3ff61000
#define DR_REG_RTCMEM1_BASE 0x3ff62000
#define DR_REG_RTCMEM2_BASE 0x3ff63000
#define DR_REG_SPI2_BASE 0x3ff64000
#define DR_REG_SPI3_BASE 0x3ff65000
#define DR_REG_SYSCON_BASE 0x3ff66000
#define DR_REG_APB_CTRL_BASE 0x3ff66000 /* Old name for SYSCON, to be removed */
#define DR_REG_I2C1_EXT_BASE 0x3ff67000
#define DR_REG_SDMMC_BASE 0x3ff68000
#define DR_REG_EMAC_BASE 0x3ff69000
#define DR_REG_CAN_BASE 0x3ff6B000
#define DR_REG_PWM1_BASE 0x3ff6C000
#define DR_REG_I2S1_BASE 0x3ff6D000
#define DR_REG_UART2_BASE 0x3ff6E000
#define DR_REG_PWM2_BASE 0x3ff6F000
#define DR_REG_PWM3_BASE 0x3ff70000
#define PERIPHS_SPI_ENCRYPT_BASEADDR DR_REG_SPI_ENCRYPT_BASE
//Registers Operation {{
#define ETS_UNCACHED_ADDR(addr) (addr)
#define ETS_CACHED_ADDR(addr) (addr)
#ifndef __ASSEMBLER__
#define IS_DPORT_REG(_r) (((_r) >= DR_REG_DPORT_BASE) && (_r) <= DR_REG_DPORT_END)
#if !defined( BOOTLOADER_BUILD ) && defined( CONFIG_ESP32_DPORT_WORKAROUND ) && defined( ESP_PLATFORM )
#define ASSERT_IF_DPORT_REG(_r, OP) TRY_STATIC_ASSERT(!IS_DPORT_REG(_r), (Cannot use OP for DPORT registers use DPORT_##OP));
#else
#define ASSERT_IF_DPORT_REG(_r, OP)
#endif
//write value to register
#define REG_WRITE(_r, _v) ({ \
ASSERT_IF_DPORT_REG((_r), REG_WRITE); \
(*(volatile uint32_t *)(_r)) = (_v); \
})
//read value from register
#define REG_READ(_r) ({ \
ASSERT_IF_DPORT_REG((_r), REG_READ); \
(*(volatile uint32_t *)(_r)); \
})
//get bit or get bits from register
#define REG_GET_BIT(_r, _b) ({ \
ASSERT_IF_DPORT_REG((_r), REG_GET_BIT); \
(*(volatile uint32_t*)(_r) & (_b)); \
})
//set bit or set bits to register
#define REG_SET_BIT(_r, _b) ({ \
ASSERT_IF_DPORT_REG((_r), REG_SET_BIT); \
(*(volatile uint32_t*)(_r) |= (_b)); \
})
//clear bit or clear bits of register
#define REG_CLR_BIT(_r, _b) ({ \
ASSERT_IF_DPORT_REG((_r), REG_CLR_BIT); \
(*(volatile uint32_t*)(_r) &= ~(_b)); \
})
//set bits of register controlled by mask
#define REG_SET_BITS(_r, _b, _m) ({ \
ASSERT_IF_DPORT_REG((_r), REG_SET_BITS); \
(*(volatile uint32_t*)(_r) = (*(volatile uint32_t*)(_r) & ~(_m)) | ((_b) & (_m))); \
})
//get field from register, uses field _S & _V to determine mask
#define REG_GET_FIELD(_r, _f) ({ \
ASSERT_IF_DPORT_REG((_r), REG_GET_FIELD); \
((REG_READ(_r) >> (_f##_S)) & (_f##_V)); \
})
//set field of a register from variable, uses field _S & _V to determine mask
#define REG_SET_FIELD(_r, _f, _v) ({ \
ASSERT_IF_DPORT_REG((_r), REG_SET_FIELD); \
(REG_WRITE((_r),((REG_READ(_r) & ~((_f##_V) << (_f##_S)))|(((_v) & (_f##_V))<<(_f##_S))))); \
})
//get field value from a variable, used when _f is not left shifted by _f##_S
#define VALUE_GET_FIELD(_r, _f) (((_r) >> (_f##_S)) & (_f))
//get field value from a variable, used when _f is left shifted by _f##_S
#define VALUE_GET_FIELD2(_r, _f) (((_r) & (_f))>> (_f##_S))
//set field value to a variable, used when _f is not left shifted by _f##_S
#define VALUE_SET_FIELD(_r, _f, _v) ((_r)=(((_r) & ~((_f) << (_f##_S)))|((_v)<<(_f##_S))))
//set field value to a variable, used when _f is left shifted by _f##_S
#define VALUE_SET_FIELD2(_r, _f, _v) ((_r)=(((_r) & ~(_f))|((_v)<<(_f##_S))))
//generate a value from a field value, used when _f is not left shifted by _f##_S
#define FIELD_TO_VALUE(_f, _v) (((_v)&(_f))<<_f##_S)
//generate a value from a field value, used when _f is left shifted by _f##_S
#define FIELD_TO_VALUE2(_f, _v) (((_v)<<_f##_S) & (_f))
//read value from register
#define READ_PERI_REG(addr) ({ \
ASSERT_IF_DPORT_REG((addr), READ_PERI_REG); \
(*((volatile uint32_t *)ETS_UNCACHED_ADDR(addr))); \
})
//write value to register
#define WRITE_PERI_REG(addr, val) ({ \
ASSERT_IF_DPORT_REG((addr), WRITE_PERI_REG); \
(*((volatile uint32_t *)ETS_UNCACHED_ADDR(addr))) = (uint32_t)(val); \
})
//clear bits of register controlled by mask
#define CLEAR_PERI_REG_MASK(reg, mask) ({ \
ASSERT_IF_DPORT_REG((reg), CLEAR_PERI_REG_MASK); \
WRITE_PERI_REG((reg), (READ_PERI_REG(reg)&(~(mask)))); \
})
//set bits of register controlled by mask
#define SET_PERI_REG_MASK(reg, mask) ({ \
ASSERT_IF_DPORT_REG((reg), SET_PERI_REG_MASK); \
WRITE_PERI_REG((reg), (READ_PERI_REG(reg)|(mask))); \
})
//get bits of register controlled by mask
#define GET_PERI_REG_MASK(reg, mask) ({ \
ASSERT_IF_DPORT_REG((reg), GET_PERI_REG_MASK); \
(READ_PERI_REG(reg) & (mask)); \
})
//get bits of register controlled by highest bit and lowest bit
#define GET_PERI_REG_BITS(reg, hipos,lowpos) ({ \
ASSERT_IF_DPORT_REG((reg), GET_PERI_REG_BITS); \
((READ_PERI_REG(reg)>>(lowpos))&((1<<((hipos)-(lowpos)+1))-1)); \
})
//set bits of register controlled by mask and shift
#define SET_PERI_REG_BITS(reg,bit_map,value,shift) ({ \
ASSERT_IF_DPORT_REG((reg), SET_PERI_REG_BITS); \
(WRITE_PERI_REG((reg),(READ_PERI_REG(reg)&(~((bit_map)<<(shift))))|(((value) & bit_map)<<(shift)) )); \
})
//get field of register
#define GET_PERI_REG_BITS2(reg, mask,shift) ({ \
ASSERT_IF_DPORT_REG((reg), GET_PERI_REG_BITS2); \
((READ_PERI_REG(reg)>>(shift))&(mask)); \
})
#endif /* !__ASSEMBLER__ */
//}}
//Periheral Clock {{
#define APB_CLK_FREQ_ROM ( 26*1000000 )
#define CPU_CLK_FREQ_ROM APB_CLK_FREQ_ROM
#define CPU_CLK_FREQ APB_CLK_FREQ //this may be incorrect, please refer to ESP32_DEFAULT_CPU_FREQ_MHZ
#define APB_CLK_FREQ ( 80*1000000 ) //unit: Hz
#define REF_CLK_FREQ ( 1000000 )
#define UART_CLK_FREQ APB_CLK_FREQ
#define WDT_CLK_FREQ APB_CLK_FREQ
#define TIMER_CLK_FREQ (80000000>>4) //80MHz divided by 16
#define SPI_CLK_DIV 4
#define TICKS_PER_US_ROM 26 // CPU is 80MHz
#define GPIO_MATRIX_DELAY_NS 25
//}}
/* Overall memory map */
#define SOC_DROM_LOW 0x3F400000
#define SOC_DROM_HIGH 0x3F800000
#define SOC_DRAM_LOW 0x3FFAE000
#define SOC_DRAM_HIGH 0x40000000
#define SOC_IROM_LOW 0x400D0000
#define SOC_IROM_HIGH 0x40400000
#define SOC_IROM_MASK_LOW 0x40000000
#define SOC_IROM_MASK_HIGH 0x40064F00
#define SOC_CACHE_PRO_LOW 0x40070000
#define SOC_CACHE_PRO_HIGH 0x40078000
#define SOC_CACHE_APP_LOW 0x40078000
#define SOC_CACHE_APP_HIGH 0x40080000
#define SOC_IRAM_LOW 0x40080000
#define SOC_IRAM_HIGH 0x400A0000
#define SOC_RTC_IRAM_LOW 0x400C0000
#define SOC_RTC_IRAM_HIGH 0x400C2000
#define SOC_RTC_DRAM_LOW 0x3FF80000
#define SOC_RTC_DRAM_HIGH 0x3FF82000
#define SOC_RTC_DATA_LOW 0x50000000
#define SOC_RTC_DATA_HIGH 0x50002000
#define SOC_EXTRAM_DATA_LOW 0x3F800000
#define SOC_EXTRAM_DATA_HIGH 0x3FC00000
//First and last words of the D/IRAM region, for both the DRAM address as well as the IRAM alias.
#define SOC_DIRAM_IRAM_LOW 0x400A0000
#define SOC_DIRAM_IRAM_HIGH 0x400C0000
#define SOC_DIRAM_DRAM_LOW 0x3FFE0000
#define SOC_DIRAM_DRAM_HIGH 0x40000000
// Byte order of D/IRAM regions is reversed between accessing as DRAM or IRAM
#define SOC_DIRAM_INVERTED 1
// Region of memory accessible via DMA. See esp_ptr_dma_capable().
#define SOC_DMA_LOW 0x3FFAE000
#define SOC_DMA_HIGH 0x40000000
// Region of memory that is byte-accessible. See esp_ptr_byte_accessible().
#define SOC_BYTE_ACCESSIBLE_LOW 0x3FF90000
#define SOC_BYTE_ACCESSIBLE_HIGH 0x40000000
//Region of memory that is internal, as in on the same silicon die as the ESP32 CPUs
//(excluding RTC data region, that's checked separately.) See esp_ptr_internal().
#define SOC_MEM_INTERNAL_LOW 0x3FF90000
#define SOC_MEM_INTERNAL_HIGH 0x400C2000
// Start (highest address) of ROM boot stack, only relevant during early boot
#define SOC_ROM_STACK_START 0x3ffe3f20
//Interrupt hardware source table
//This table is decided by hardware, don't touch this.
#define ETS_WIFI_MAC_INTR_SOURCE 0/**< interrupt of WiFi MAC, level*/
#define ETS_WIFI_MAC_NMI_SOURCE 1/**< interrupt of WiFi MAC, NMI, use if MAC have bug to fix in NMI*/
#define ETS_WIFI_BB_INTR_SOURCE 2/**< interrupt of WiFi BB, level, we can do some calibartion*/
#define ETS_BT_MAC_INTR_SOURCE 3/**< will be cancelled*/
#define ETS_BT_BB_INTR_SOURCE 4/**< interrupt of BT BB, level*/
#define ETS_BT_BB_NMI_SOURCE 5/**< interrupt of BT BB, NMI, use if BB have bug to fix in NMI*/
#define ETS_RWBT_INTR_SOURCE 6/**< interrupt of RWBT, level*/
#define ETS_RWBLE_INTR_SOURCE 7/**< interrupt of RWBLE, level*/
#define ETS_RWBT_NMI_SOURCE 8/**< interrupt of RWBT, NMI, use if RWBT have bug to fix in NMI*/
#define ETS_RWBLE_NMI_SOURCE 9/**< interrupt of RWBLE, NMI, use if RWBT have bug to fix in NMI*/
#define ETS_SLC0_INTR_SOURCE 10/**< interrupt of SLC0, level*/
#define ETS_SLC1_INTR_SOURCE 11/**< interrupt of SLC1, level*/
#define ETS_UHCI0_INTR_SOURCE 12/**< interrupt of UHCI0, level*/
#define ETS_UHCI1_INTR_SOURCE 13/**< interrupt of UHCI1, level*/
#define ETS_TG0_T0_LEVEL_INTR_SOURCE 14/**< interrupt of TIMER_GROUP0, TIMER0, level, we would like use EDGE for timer if permission*/
#define ETS_TG0_T1_LEVEL_INTR_SOURCE 15/**< interrupt of TIMER_GROUP0, TIMER1, level, we would like use EDGE for timer if permission*/
#define ETS_TG0_WDT_LEVEL_INTR_SOURCE 16/**< interrupt of TIMER_GROUP0, WATCHDOG, level*/
#define ETS_TG0_LACT_LEVEL_INTR_SOURCE 17/**< interrupt of TIMER_GROUP0, LACT, level*/
#define ETS_TG1_T0_LEVEL_INTR_SOURCE 18/**< interrupt of TIMER_GROUP1, TIMER0, level, we would like use EDGE for timer if permission*/
#define ETS_TG1_T1_LEVEL_INTR_SOURCE 19/**< interrupt of TIMER_GROUP1, TIMER1, level, we would like use EDGE for timer if permission*/
#define ETS_TG1_WDT_LEVEL_INTR_SOURCE 20/**< interrupt of TIMER_GROUP1, WATCHDOG, level*/
#define ETS_TG1_LACT_LEVEL_INTR_SOURCE 21/**< interrupt of TIMER_GROUP1, LACT, level*/
#define ETS_GPIO_INTR_SOURCE 22/**< interrupt of GPIO, level*/
#define ETS_GPIO_NMI_SOURCE 23/**< interrupt of GPIO, NMI*/
#define ETS_FROM_CPU_INTR0_SOURCE 24/**< interrupt0 generated from a CPU, level*/ /* Used for FreeRTOS */
#define ETS_FROM_CPU_INTR1_SOURCE 25/**< interrupt1 generated from a CPU, level*/ /* Used for FreeRTOS */
#define ETS_FROM_CPU_INTR2_SOURCE 26/**< interrupt2 generated from a CPU, level*/ /* Used for DPORT Access */
#define ETS_FROM_CPU_INTR3_SOURCE 27/**< interrupt3 generated from a CPU, level*/ /* Used for DPORT Access */
#define ETS_SPI0_INTR_SOURCE 28/**< interrupt of SPI0, level, SPI0 is for Cache Access, do not use this*/
#define ETS_SPI1_INTR_SOURCE 29/**< interrupt of SPI1, level, SPI1 is for flash read/write, do not use this*/
#define ETS_SPI2_INTR_SOURCE 30/**< interrupt of SPI2, level*/
#define ETS_SPI3_INTR_SOURCE 31/**< interrupt of SPI3, level*/
#define ETS_I2S0_INTR_SOURCE 32/**< interrupt of I2S0, level*/
#define ETS_I2S1_INTR_SOURCE 33/**< interrupt of I2S1, level*/
#define ETS_UART0_INTR_SOURCE 34/**< interrupt of UART0, level*/
#define ETS_UART1_INTR_SOURCE 35/**< interrupt of UART1, level*/
#define ETS_UART2_INTR_SOURCE 36/**< interrupt of UART2, level*/
#define ETS_SDIO_HOST_INTR_SOURCE 37/**< interrupt of SD/SDIO/MMC HOST, level*/
#define ETS_ETH_MAC_INTR_SOURCE 38/**< interrupt of ethernet mac, level*/
#define ETS_PWM0_INTR_SOURCE 39/**< interrupt of PWM0, level, Reserved*/
#define ETS_PWM1_INTR_SOURCE 40/**< interrupt of PWM1, level, Reserved*/
#define ETS_PWM2_INTR_SOURCE 41/**< interrupt of PWM2, level*/
#define ETS_PWM3_INTR_SOURCE 42/**< interruot of PWM3, level*/
#define ETS_LEDC_INTR_SOURCE 43/**< interrupt of LED PWM, level*/
#define ETS_EFUSE_INTR_SOURCE 44/**< interrupt of efuse, level, not likely to use*/
#define ETS_CAN_INTR_SOURCE 45/**< interrupt of can, level*/
#define ETS_RTC_CORE_INTR_SOURCE 46/**< interrupt of rtc core, level, include rtc watchdog*/
#define ETS_RMT_INTR_SOURCE 47/**< interrupt of remote controller, level*/
#define ETS_PCNT_INTR_SOURCE 48/**< interrupt of pluse count, level*/
#define ETS_I2C_EXT0_INTR_SOURCE 49/**< interrupt of I2C controller1, level*/
#define ETS_I2C_EXT1_INTR_SOURCE 50/**< interrupt of I2C controller0, level*/
#define ETS_RSA_INTR_SOURCE 51/**< interrupt of RSA accelerator, level*/
#define ETS_SPI1_DMA_INTR_SOURCE 52/**< interrupt of SPI1 DMA, SPI1 is for flash read/write, do not use this*/
#define ETS_SPI2_DMA_INTR_SOURCE 53/**< interrupt of SPI2 DMA, level*/
#define ETS_SPI3_DMA_INTR_SOURCE 54/**< interrupt of SPI3 DMA, level*/
#define ETS_WDT_INTR_SOURCE 55/**< will be cancelled*/
#define ETS_TIMER1_INTR_SOURCE 56/**< will be cancelled*/
#define ETS_TIMER2_INTR_SOURCE 57/**< will be cancelled*/
#define ETS_TG0_T0_EDGE_INTR_SOURCE 58/**< interrupt of TIMER_GROUP0, TIMER0, EDGE*/
#define ETS_TG0_T1_EDGE_INTR_SOURCE 59/**< interrupt of TIMER_GROUP0, TIMER1, EDGE*/
#define ETS_TG0_WDT_EDGE_INTR_SOURCE 60/**< interrupt of TIMER_GROUP0, WATCH DOG, EDGE*/
#define ETS_TG0_LACT_EDGE_INTR_SOURCE 61/**< interrupt of TIMER_GROUP0, LACT, EDGE*/
#define ETS_TG1_T0_EDGE_INTR_SOURCE 62/**< interrupt of TIMER_GROUP1, TIMER0, EDGE*/
#define ETS_TG1_T1_EDGE_INTR_SOURCE 63/**< interrupt of TIMER_GROUP1, TIMER1, EDGE*/
#define ETS_TG1_WDT_EDGE_INTR_SOURCE 64/**< interrupt of TIMER_GROUP1, WATCHDOG, EDGE*/
#define ETS_TG1_LACT_EDGE_INTR_SOURCE 65/**< interrupt of TIMER_GROUP0, LACT, EDGE*/
#define ETS_MMU_IA_INTR_SOURCE 66/**< interrupt of MMU Invalid Access, LEVEL*/
#define ETS_MPU_IA_INTR_SOURCE 67/**< interrupt of MPU Invalid Access, LEVEL*/
#define ETS_CACHE_IA_INTR_SOURCE 68/**< interrupt of Cache Invalied Access, LEVEL*/
#define ETS_MAX_INTR_SOURCE 69/**< total number of interrupt sources*/
//interrupt cpu using table, Please see the core-isa.h
/*************************************************************************************************************
* Intr num Level Type PRO CPU usage APP CPU uasge
* 0 1 extern level WMAC Reserved
* 1 1 extern level BT/BLE Host HCI DMA BT/BLE Host HCI DMA
* 2 1 extern level
* 3 1 extern level
* 4 1 extern level WBB
* 5 1 extern level BT/BLE Controller BT/BLE Controller
* 6 1 timer FreeRTOS Tick(L1) FreeRTOS Tick(L1)
* 7 1 software BT/BLE VHCI BT/BLE VHCI
* 8 1 extern level BT/BLE BB(RX/TX) BT/BLE BB(RX/TX)
* 9 1 extern level
* 10 1 extern edge
* 11 3 profiling
* 12 1 extern level
* 13 1 extern level
* 14 7 nmi Reserved Reserved
* 15 3 timer FreeRTOS Tick(L3) FreeRTOS Tick(L3)
* 16 5 timer
* 17 1 extern level
* 18 1 extern level
* 19 2 extern level
* 20 2 extern level
* 21 2 extern level
* 22 3 extern edge
* 23 3 extern level
* 24 4 extern level TG1_WDT
* 25 4 extern level CACHEERR
* 26 5 extern level
* 27 3 extern level Reserved Reserved
* 28 4 extern edge DPORT ACCESS DPORT ACCESS
* 29 3 software Reserved Reserved
* 30 4 extern edge Reserved Reserved
* 31 5 extern level
*************************************************************************************************************
*/
//CPU0 Interrupt number reserved, not touch this.
#define ETS_WMAC_INUM 0
#define ETS_BT_HOST_INUM 1
#define ETS_WBB_INUM 4
#define ETS_TG0_T1_INUM 10 /**< use edge interrupt*/
#define ETS_FRC1_INUM 22
#define ETS_T1_WDT_INUM 24
#define ETS_MEMACCESS_ERR_INUM 25
/* backwards compatibility only, use ETS_MEMACCESS_ERR_INUM instead*/
#define ETS_CACHEERR_INUM ETS_MEMACCESS_ERR_INUM
#define ETS_DPORT_INUM 28
//CPU0 Interrupt number used in ROM, should be cancelled in SDK
#define ETS_SLC_INUM 1
#define ETS_UART0_INUM 5
#define ETS_UART1_INUM 5
//Other interrupt number should be managed by the user
//Invalid interrupt for number interrupt matrix
#define ETS_INVALID_INUM 6
#endif /* _ESP32_SOC_H_ */

15
tools/sdk/esp32/include/soc/soc/esp32/include/soc/soc_caps.h Normal file
View File

@ -0,0 +1,15 @@
// The long term plan is to have a single soc_caps.h for each peripheral.
// During the refactoring and multichip support development process, we
// seperate these information into periph_caps.h for each peripheral and
// include them here.
#pragma once
#define SOC_MCPWM_SUPPORTED 1
#define SOC_SDMMC_HOST_SUPPORTED 1
#define SOC_BT_SUPPORTED 1
#define SOC_SDIO_SLAVE_SUPPORTED 1
#define SOC_CAN_SUPPORTED 1
#define SOC_EMAC_SUPPORTED 1
#define SOC_CPU_CORES_NUM 2

46
tools/sdk/esp32/include/soc/soc/esp32/include/soc/soc_ulp.h Normal file
View File

@ -0,0 +1,46 @@
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
// This file contains various convenience macros to be used in ULP programs.
// Helper macros to calculate bit field width from mask, using the preprocessor.
// Used later in READ_RTC_FIELD and WRITE_RTC_FIELD.
#define IS_BIT_SET(m, i) (((m) >> (i)) & 1)
#define MASK_TO_WIDTH_HELPER1(m, i) IS_BIT_SET(m, i)
#define MASK_TO_WIDTH_HELPER2(m, i) (MASK_TO_WIDTH_HELPER1(m, i) + MASK_TO_WIDTH_HELPER1(m, i + 1))
#define MASK_TO_WIDTH_HELPER4(m, i) (MASK_TO_WIDTH_HELPER2(m, i) + MASK_TO_WIDTH_HELPER2(m, i + 2))
#define MASK_TO_WIDTH_HELPER8(m, i) (MASK_TO_WIDTH_HELPER4(m, i) + MASK_TO_WIDTH_HELPER4(m, i + 4))
#define MASK_TO_WIDTH_HELPER16(m, i) (MASK_TO_WIDTH_HELPER8(m, i) + MASK_TO_WIDTH_HELPER8(m, i + 8))
#define MASK_TO_WIDTH_HELPER32(m, i) (MASK_TO_WIDTH_HELPER16(m, i) + MASK_TO_WIDTH_HELPER16(m, i + 16))
// Peripheral register access macros, build around REG_RD and REG_WR instructions.
// Registers defined in rtc_cntl_reg.h, rtc_io_reg.h, sens_reg.h, and rtc_i2c_reg.h are usable with these macros.
// Read from rtc_reg[low_bit + bit_width - 1 : low_bit] into R0, bit_width <= 16
#define READ_RTC_REG(rtc_reg, low_bit, bit_width) \
REG_RD (((rtc_reg) - DR_REG_RTCCNTL_BASE) / 4), ((low_bit) + (bit_width) - 1), (low_bit)
// Write immediate value into rtc_reg[low_bit + bit_width - 1 : low_bit], bit_width <= 8
#define WRITE_RTC_REG(rtc_reg, low_bit, bit_width, value) \
REG_WR (((rtc_reg) - DR_REG_RTCCNTL_BASE) / 4), ((low_bit) + (bit_width) - 1), (low_bit), ((value) & 0xff)
// Read from a field in rtc_reg into R0, up to 16 bits
#define READ_RTC_FIELD(rtc_reg, field) \
READ_RTC_REG(rtc_reg, field ## _S, MASK_TO_WIDTH_HELPER16(field ## _V, 0))
// Write immediate value into a field in rtc_reg, up to 8 bits
#define WRITE_RTC_FIELD(rtc_reg, field, value) \
WRITE_RTC_REG(rtc_reg, field ## _S, MASK_TO_WIDTH_HELPER8(field ## _V, 0), ((value) & field ## _V))

67
tools/sdk/esp32/include/soc/soc/esp32/include/soc/spi_caps.h Normal file
View File

@ -0,0 +1,67 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#define SOC_SPI_PERIPH_NUM 3
#define SOC_SPI_DMA_CHAN_NUM 2
#define SOC_SPI_PERIPH_CS_NUM(i) 3
#define SPI_FUNC_NUM 1
#define SPI_IOMUX_PIN_NUM_MISO 7
#define SPI_IOMUX_PIN_NUM_MOSI 8
#define SPI_IOMUX_PIN_NUM_CLK 6
#define SPI_IOMUX_PIN_NUM_CS 11
#define SPI_IOMUX_PIN_NUM_WP 10
#define SPI_IOMUX_PIN_NUM_HD 9
#define HSPI_FUNC_NUM 1
//For D2WD and PICO-D4 chip
#define SPI_D2WD_PIN_NUM_MISO 17
#define SPI_D2WD_PIN_NUM_MOSI 8
#define SPI_D2WD_PIN_NUM_CLK 6
#define SPI_D2WD_PIN_NUM_CS 16
#define SPI_D2WD_PIN_NUM_WP 7
#define SPI_D2WD_PIN_NUM_HD 11
#define HSPI_IOMUX_PIN_NUM_MISO 12
#define HSPI_IOMUX_PIN_NUM_MOSI 13
#define HSPI_IOMUX_PIN_NUM_CLK 14
#define HSPI_IOMUX_PIN_NUM_CS 15
#define HSPI_IOMUX_PIN_NUM_WP 2
#define HSPI_IOMUX_PIN_NUM_HD 4
#define VSPI_FUNC_NUM 1
#define VSPI_IOMUX_PIN_NUM_MISO 19
#define VSPI_IOMUX_PIN_NUM_MOSI 23
#define VSPI_IOMUX_PIN_NUM_CLK 18
#define VSPI_IOMUX_PIN_NUM_CS 5
#define VSPI_IOMUX_PIN_NUM_WP 22
#define VSPI_IOMUX_PIN_NUM_HD 21
#define SOC_SPI_MAXIMUM_BUFFER_SIZE 64
#define SOC_SPI_SUPPORT_AS_CS 1 //Support to toggle the CS while the clock toggles
//#define SOC_SPI_SUPPORT_DDRCLK
//#define SOC_SPI_SLAVE_SUPPORT_SEG_TRANS
//#define SOC_SPI_SUPPORT_CD_SIG
// Peripheral supports DIO, DOUT, QIO, or QOUT
#define SOC_SPI_PERIPH_SUPPORT_MULTILINE_MODE(spi_dev) 1
// Peripheral doesn't support output given level during its "dummy phase"
#define SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUTPUT(spi_dev) 0

1713
tools/sdk/esp32/include/soc/soc/esp32/include/soc/spi_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

688
tools/sdk/esp32/include/soc/soc/esp32/include/soc/spi_struct.h Normal file
View File

@ -0,0 +1,688 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_SPI_STRUCT_H_
#define _SOC_SPI_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct spi_dev_s {
union {
struct {
uint32_t reserved0: 16; /*reserved*/
uint32_t flash_per: 1; /*program erase resume bit program erase suspend operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
uint32_t flash_pes: 1; /*program erase suspend bit program erase suspend operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
uint32_t usr: 1; /*User define command enable. An operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
uint32_t flash_hpm: 1; /*Drive Flash into high performance mode. The bit will be cleared once the operation done.1: enable 0: disable.*/
uint32_t flash_res: 1; /*This bit combined with reg_resandres bit releases Flash from the power-down state or high performance mode and obtains the devices ID. The bit will be cleared once the operation done.1: enable 0: disable.*/
uint32_t flash_dp: 1; /*Drive Flash into power down. An operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
uint32_t flash_ce: 1; /*Chip erase enable. Chip erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
uint32_t flash_be: 1; /*Block erase enable(32KB) . Block erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
uint32_t flash_se: 1; /*Sector erase enable(4KB). Sector erase operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
uint32_t flash_pp: 1; /*Page program enable(1 byte ~256 bytes data to be programmed). Page program operation will be triggered when the bit is set. The bit will be cleared once the operation done .1: enable 0: disable.*/
uint32_t flash_wrsr: 1; /*Write status register enable. Write status operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
uint32_t flash_rdsr: 1; /*Read status register-1. Read status operation will be triggered when the bit is set. The bit will be cleared once the operation done.1: enable 0: disable.*/
uint32_t flash_rdid: 1; /*Read JEDEC ID . Read ID command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
uint32_t flash_wrdi: 1; /*Write flash disable. Write disable command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
uint32_t flash_wren: 1; /*Write flash enable. Write enable command will be sent when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
uint32_t flash_read: 1; /*Read flash enable. Read flash operation will be triggered when the bit is set. The bit will be cleared once the operation done. 1: enable 0: disable.*/
};
uint32_t val;
} cmd;
uint32_t addr; /*addr to slave / from master. SPI transfer from the MSB to the LSB. If length > 32 bits, then address continues from MSB of slv_wr_status.*/
union {
struct {
uint32_t reserved0: 10; /*reserved*/
uint32_t fcs_crc_en: 1; /*For SPI1 initialize crc32 module before writing encrypted data to flash. Active low.*/
uint32_t tx_crc_en: 1; /*For SPI1 enable crc32 when writing encrypted data to flash. 1: enable 0:disable*/
uint32_t wait_flash_idle_en: 1; /*wait flash idle when program flash or erase flash. 1: enable 0: disable.*/
uint32_t fastrd_mode: 1; /*This bit enable the bits: spi_fread_qio spi_fread_dio spi_fread_qout and spi_fread_dout. 1: enable 0: disable.*/
uint32_t fread_dual: 1; /*In the read operations read-data phase apply 2 signals. 1: enable 0: disable.*/
uint32_t resandres: 1; /*The Device ID is read out to SPI_RD_STATUS register, this bit combine with spi_flash_res bit. 1: enable 0: disable.*/
uint32_t reserved16: 4; /*reserved*/
uint32_t fread_quad: 1; /*In the read operations read-data phase apply 4 signals. 1: enable 0: disable.*/
uint32_t wp: 1; /*Write protect signal output when SPI is idle. 1: output high 0: output low.*/
uint32_t wrsr_2b: 1; /*two bytes data will be written to status register when it is set. 1: enable 0: disable.*/
uint32_t fread_dio: 1; /*In the read operations address phase and read-data phase apply 2 signals. 1: enable 0: disable.*/
uint32_t fread_qio: 1; /*In the read operations address phase and read-data phase apply 4 signals. 1: enable 0: disable.*/
uint32_t rd_bit_order: 1; /*In read-data (MISO) phase 1: LSB first 0: MSB first*/
uint32_t wr_bit_order: 1; /*In command address write-data (MOSI) phases 1: LSB firs 0: MSB first*/
uint32_t reserved27: 5; /*reserved*/
};
uint32_t val;
} ctrl;
union {
struct {
uint32_t reserved0: 16; /*reserved*/
uint32_t cs_hold_delay_res:12; /*Delay cycles of resume Flash when resume Flash is enable by spi clock.*/
uint32_t cs_hold_delay: 4; /*SPI cs signal is delayed by spi clock cycles*/
};
uint32_t val;
} ctrl1;
union {
struct {
uint32_t status: 16; /*In the slave mode, it is the status for master to read out.*/
uint32_t wb_mode: 8; /*Mode bits in the flash fast read mode, it is combined with spi_fastrd_mode bit.*/
uint32_t status_ext: 8; /*In the slave mode,it is the status for master to read out.*/
};
uint32_t val;
} rd_status;
union {
struct {
uint32_t setup_time: 4; /*(cycles-1) of ,prepare, phase by spi clock, this bits combined with spi_cs_setup bit.*/
uint32_t hold_time: 4; /*delay cycles of cs pin by spi clock, this bits combined with spi_cs_hold bit.*/
uint32_t ck_out_low_mode: 4; /*modify spi clock duty ratio when the value is lager than 8, the bits are combined with spi_clkcnt_N bits and spi_clkcnt_L bits.*/
uint32_t ck_out_high_mode: 4; /*modify spi clock duty ratio when the value is lager than 8, the bits are combined with spi_clkcnt_N bits and spi_clkcnt_H bits.*/
uint32_t miso_delay_mode: 2; /*MISO signals are delayed by spi_clk. 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle*/
uint32_t miso_delay_num: 3; /*MISO signals are delayed by system clock cycles*/
uint32_t mosi_delay_mode: 2; /*MOSI signals are delayed by spi_clk. 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle*/
uint32_t mosi_delay_num: 3; /*MOSI signals are delayed by system clock cycles*/
uint32_t cs_delay_mode: 2; /*spi_cs signal is delayed by spi_clk . 0: zero 1: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by half cycle else delayed by one cycle 2: if spi_ck_out_edge or spi_ck_i_edge is set 1 delayed by one cycle else delayed by half cycle 3: delayed one cycle*/
uint32_t cs_delay_num: 4; /*spi_cs signal is delayed by system clock cycles*/
};
uint32_t val;
} ctrl2;
union {
struct {
uint32_t clkcnt_l: 6; /*In the master mode it must be equal to spi_clkcnt_N. In the slave mode it must be 0.*/
uint32_t clkcnt_h: 6; /*In the master mode it must be floor((spi_clkcnt_N+1)/2-1). In the slave mode it must be 0.*/
uint32_t clkcnt_n: 6; /*In the master mode it is the divider of spi_clk. So spi_clk frequency is system/(spi_clkdiv_pre+1)/(spi_clkcnt_N+1)*/
uint32_t clkdiv_pre: 13; /*In the master mode it is pre-divider of spi_clk.*/
uint32_t clk_equ_sysclk: 1; /*In the master mode 1: spi_clk is eqaul to system 0: spi_clk is divided from system clock.*/
};
uint32_t val;
} clock;
union {
struct {
uint32_t doutdin: 1; /*Set the bit to enable full duplex communication. 1: enable 0: disable.*/
uint32_t reserved1: 3; /*reserved*/
uint32_t cs_hold: 1; /*spi cs keep low when spi is in ,done, phase. 1: enable 0: disable.*/
uint32_t cs_setup: 1; /*spi cs is enable when spi is in ,prepare, phase. 1: enable 0: disable.*/
uint32_t ck_i_edge: 1; /*In the slave mode the bit is same as spi_ck_out_edge in master mode. It is combined with spi_miso_delay_mode bits.*/
uint32_t ck_out_edge: 1; /*the bit combined with spi_mosi_delay_mode bits to set mosi signal delay mode.*/
uint32_t reserved8: 2; /*reserved*/
uint32_t rd_byte_order: 1; /*In read-data (MISO) phase 1: big-endian 0: little_endian*/
uint32_t wr_byte_order: 1; /*In command address write-data (MOSI) phases 1: big-endian 0: litte_endian*/
uint32_t fwrite_dual: 1; /*In the write operations read-data phase apply 2 signals*/
uint32_t fwrite_quad: 1; /*In the write operations read-data phase apply 4 signals*/
uint32_t fwrite_dio: 1; /*In the write operations address phase and read-data phase apply 2 signals.*/
uint32_t fwrite_qio: 1; /*In the write operations address phase and read-data phase apply 4 signals.*/
uint32_t sio: 1; /*Set the bit to enable 3-line half duplex communication mosi and miso signals share the same pin. 1: enable 0: disable.*/
uint32_t usr_hold_pol: 1; /*It is combined with hold bits to set the polarity of spi hold line 1: spi will be held when spi hold line is high 0: spi will be held when spi hold line is low*/
uint32_t usr_dout_hold: 1; /*spi is hold at data out state the bit combined with spi_usr_hold_pol bit.*/
uint32_t usr_din_hold: 1; /*spi is hold at data in state the bit combined with spi_usr_hold_pol bit.*/
uint32_t usr_dummy_hold: 1; /*spi is hold at dummy state the bit combined with spi_usr_hold_pol bit.*/
uint32_t usr_addr_hold: 1; /*spi is hold at address state the bit combined with spi_usr_hold_pol bit.*/
uint32_t usr_cmd_hold: 1; /*spi is hold at command state the bit combined with spi_usr_hold_pol bit.*/
uint32_t usr_prep_hold: 1; /*spi is hold at prepare state the bit combined with spi_usr_hold_pol bit.*/
uint32_t usr_miso_highpart: 1; /*read-data phase only access to high-part of the buffer spi_w8~spi_w15. 1: enable 0: disable.*/
uint32_t usr_mosi_highpart: 1; /*write-data phase only access to high-part of the buffer spi_w8~spi_w15. 1: enable 0: disable.*/
uint32_t usr_dummy_idle: 1; /*spi clock is disable in dummy phase when the bit is enable.*/
uint32_t usr_mosi: 1; /*This bit enable the write-data phase of an operation.*/
uint32_t usr_miso: 1; /*This bit enable the read-data phase of an operation.*/
uint32_t usr_dummy: 1; /*This bit enable the dummy phase of an operation.*/
uint32_t usr_addr: 1; /*This bit enable the address phase of an operation.*/
uint32_t usr_command: 1; /*This bit enable the command phase of an operation.*/
};
uint32_t val;
} user;
union {
struct {
uint32_t usr_dummy_cyclelen: 8; /*The length in spi_clk cycles of dummy phase. The register value shall be (cycle_num-1).*/
uint32_t reserved8: 18; /*reserved*/
uint32_t usr_addr_bitlen: 6; /*The length in bits of address phase. The register value shall be (bit_num-1).*/
};
uint32_t val;
} user1;
union {
struct {
uint32_t usr_command_value: 16; /*The value of command. Output sequence: bit 7-0 and then 15-8.*/
uint32_t reserved16: 12; /*reserved*/
uint32_t usr_command_bitlen: 4; /*The length in bits of command phase. The register value shall be (bit_num-1)*/
};
uint32_t val;
} user2;
union {
struct {
uint32_t usr_mosi_dbitlen:24; /*The length in bits of write-data. The register value shall be (bit_num-1).*/
uint32_t reserved24: 8; /*reserved*/
};
uint32_t val;
} mosi_dlen;
union {
struct {
uint32_t usr_miso_dbitlen:24; /*The length in bits of read-data. The register value shall be (bit_num-1).*/
uint32_t reserved24: 8; /*reserved*/
};
uint32_t val;
} miso_dlen;
uint32_t slv_wr_status; /*In the slave mode this register are the status register for the master to write into. In the master mode this register are the higher 32bits in the 64 bits address condition.*/
union {
struct {
uint32_t cs0_dis: 1; /*SPI CS0 pin enable, 1: disable CS0, 0: spi_cs0 signal is from/to CS0 pin*/
uint32_t cs1_dis: 1; /*SPI CS1 pin enable, 1: disable CS1, 0: spi_cs1 signal is from/to CS1 pin*/
uint32_t cs2_dis: 1; /*SPI CS2 pin enable, 1: disable CS2, 0: spi_cs2 signal is from/to CS2 pin*/
uint32_t reserved3: 2; /*reserved*/
uint32_t ck_dis: 1; /*1: spi clk out disable 0: spi clk out enable*/
uint32_t master_cs_pol: 3; /*In the master mode the bits are the polarity of spi cs line the value is equivalent to spi_cs ^ spi_master_cs_pol.*/
uint32_t reserved9: 2; /*reserved*/
uint32_t master_ck_sel: 3; /*In the master mode spi cs line is enable as spi clk it is combined with spi_cs0_dis spi_cs1_dis spi_cs2_dis.*/
uint32_t reserved14: 15; /*reserved*/
uint32_t ck_idle_edge: 1; /*1: spi clk line is high when idle 0: spi clk line is low when idle*/
uint32_t cs_keep_active: 1; /*spi cs line keep low when the bit is set.*/
uint32_t reserved31: 1; /*reserved*/
};
uint32_t val;
} pin;
union {
struct {
uint32_t rd_buf_done: 1; /*The interrupt raw bit for the completion of read-buffer operation in the slave mode.*/
uint32_t wr_buf_done: 1; /*The interrupt raw bit for the completion of write-buffer operation in the slave mode.*/
uint32_t rd_sta_done: 1; /*The interrupt raw bit for the completion of read-status operation in the slave mode.*/
uint32_t wr_sta_done: 1; /*The interrupt raw bit for the completion of write-status operation in the slave mode.*/
uint32_t trans_done: 1; /*The interrupt raw bit for the completion of any operation in both the master mode and the slave mode.*/
uint32_t rd_buf_inten: 1; /*The interrupt enable bit for the completion of read-buffer operation in the slave mode.*/
uint32_t wr_buf_inten: 1; /*The interrupt enable bit for the completion of write-buffer operation in the slave mode.*/
uint32_t rd_sta_inten: 1; /*The interrupt enable bit for the completion of read-status operation in the slave mode.*/
uint32_t wr_sta_inten: 1; /*The interrupt enable bit for the completion of write-status operation in the slave mode.*/
uint32_t trans_inten: 1; /*The interrupt enable bit for the completion of any operation in both the master mode and the slave mode.*/
uint32_t cs_i_mode: 2; /*In the slave mode this bits used to synchronize the input spi cs signal and eliminate spi cs jitter.*/
uint32_t reserved12: 5; /*reserved*/
uint32_t last_command: 3; /*In the slave mode it is the value of command.*/
uint32_t last_state: 3; /*In the slave mode it is the state of spi state machine.*/
uint32_t trans_cnt: 4; /*The operations counter in both the master mode and the slave mode. 4: read-status*/
uint32_t cmd_define: 1; /*1: slave mode commands are defined in SPI_SLAVE3. 0: slave mode commands are fixed as: 1: write-status 2: write-buffer and 3: read-buffer.*/
uint32_t wr_rd_sta_en: 1; /*write and read status enable in the slave mode*/
uint32_t wr_rd_buf_en: 1; /*write and read buffer enable in the slave mode*/
uint32_t slave_mode: 1; /*1: slave mode 0: master mode.*/
uint32_t sync_reset: 1; /*Software reset enable, reset the spi clock line cs line and data lines.*/
};
uint32_t val;
} slave;
union {
struct {
uint32_t rdbuf_dummy_en: 1; /*In the slave mode it is the enable bit of dummy phase for read-buffer operations.*/
uint32_t wrbuf_dummy_en: 1; /*In the slave mode it is the enable bit of dummy phase for write-buffer operations.*/
uint32_t rdsta_dummy_en: 1; /*In the slave mode it is the enable bit of dummy phase for read-status operations.*/
uint32_t wrsta_dummy_en: 1; /*In the slave mode it is the enable bit of dummy phase for write-status operations.*/
uint32_t wr_addr_bitlen: 6; /*In the slave mode it is the address length in bits for write-buffer operation. The register value shall be (bit_num-1).*/
uint32_t rd_addr_bitlen: 6; /*In the slave mode it is the address length in bits for read-buffer operation. The register value shall be (bit_num-1).*/
uint32_t reserved16: 9; /*reserved*/
uint32_t status_readback: 1; /*In the slave mode 1:read register of SPI_SLV_WR_STATUS 0: read register of SPI_RD_STATUS.*/
uint32_t status_fast_en: 1; /*In the slave mode enable fast read status.*/
uint32_t status_bitlen: 5; /*In the slave mode it is the length of status bit.*/
};
uint32_t val;
} slave1;
union {
struct {
uint32_t rdsta_dummy_cyclelen: 8; /*In the slave mode it is the length in spi_clk cycles of dummy phase for read-status operations. The register value shall be (cycle_num-1).*/
uint32_t wrsta_dummy_cyclelen: 8; /*In the slave mode it is the length in spi_clk cycles of dummy phase for write-status operations. The register value shall be (cycle_num-1).*/
uint32_t rdbuf_dummy_cyclelen: 8; /*In the slave mode it is the length in spi_clk cycles of dummy phase for read-buffer operations. The register value shall be (cycle_num-1).*/
uint32_t wrbuf_dummy_cyclelen: 8; /*In the slave mode it is the length in spi_clk cycles of dummy phase for write-buffer operations. The register value shall be (cycle_num-1).*/
};
uint32_t val;
} slave2;
union {
struct {
uint32_t rdbuf_cmd_value: 8; /*In the slave mode it is the value of read-buffer command.*/
uint32_t wrbuf_cmd_value: 8; /*In the slave mode it is the value of write-buffer command.*/
uint32_t rdsta_cmd_value: 8; /*In the slave mode it is the value of read-status command.*/
uint32_t wrsta_cmd_value: 8; /*In the slave mode it is the value of write-status command.*/
};
uint32_t val;
} slave3;
union {
struct {
uint32_t bit_len: 24; /*In the slave mode it is the length in bits for write-buffer operations. The register value shall be (bit_num-1).*/
uint32_t reserved24: 8; /*reserved*/
};
uint32_t val;
} slv_wrbuf_dlen;
union {
struct {
uint32_t bit_len: 24; /*In the slave mode it is the length in bits for read-buffer operations. The register value shall be (bit_num-1).*/
uint32_t reserved24: 8; /*reserved*/
};
uint32_t val;
} slv_rdbuf_dlen;
union {
struct {
uint32_t req_en: 1; /*For SPI0 Cache access enable 1: enable 0:disable.*/
uint32_t usr_cmd_4byte: 1; /*For SPI0 cache read flash with 4 bytes command 1: enable 0:disable.*/
uint32_t flash_usr_cmd: 1; /*For SPI0 cache read flash for user define command 1: enable 0:disable.*/
uint32_t flash_pes_en: 1; /*For SPI0 spi1 send suspend command before cache read flash 1: enable 0:disable.*/
uint32_t reserved4: 28; /*reserved*/
};
uint32_t val;
} cache_fctrl;
union {
struct {
uint32_t reserved0: 1; /*reserved*/
uint32_t usr_sram_dio: 1; /*For SPI0 In the spi sram mode spi dual I/O mode enable 1: enable 0:disable*/
uint32_t usr_sram_qio: 1; /*For SPI0 In the spi sram mode spi quad I/O mode enable 1: enable 0:disable*/
uint32_t usr_wr_sram_dummy: 1; /*For SPI0 In the spi sram mode it is the enable bit of dummy phase for write operations.*/
uint32_t usr_rd_sram_dummy: 1; /*For SPI0 In the spi sram mode it is the enable bit of dummy phase for read operations.*/
uint32_t cache_sram_usr_rcmd: 1; /*For SPI0 In the spi sram mode cache read sram for user define command.*/
uint32_t sram_bytes_len: 8; /*For SPI0 In the sram mode it is the byte length of spi read sram data.*/
uint32_t sram_dummy_cyclelen: 8; /*For SPI0 In the sram mode it is the length in bits of address phase. The register value shall be (bit_num-1).*/
uint32_t sram_addr_bitlen: 6; /*For SPI0 In the sram mode it is the length in bits of address phase. The register value shall be (bit_num-1).*/
uint32_t cache_sram_usr_wcmd: 1; /*For SPI0 In the spi sram mode cache write sram for user define command*/
uint32_t reserved29: 3; /*reserved*/
};
uint32_t val;
} cache_sctrl;
union {
struct {
uint32_t dio: 1; /*For SPI0 SRAM DIO mode enable . SRAM DIO enable command will be send when the bit is set. The bit will be cleared once the operation done.*/
uint32_t qio: 1; /*For SPI0 SRAM QIO mode enable . SRAM QIO enable command will be send when the bit is set. The bit will be cleared once the operation done.*/
uint32_t reserved2: 2; /*For SPI0 SRAM write enable . SRAM write operation will be triggered when the bit is set. The bit will be cleared once the operation done.*/
uint32_t rst_io: 1; /*For SPI0 SRAM IO mode reset enable. SRAM IO mode reset operation will be triggered when the bit is set. The bit will be cleared once the operation done*/
uint32_t reserved5:27; /*reserved*/
};
uint32_t val;
} sram_cmd;
union {
struct {
uint32_t usr_rd_cmd_value: 16; /*For SPI0 When cache mode is enable it is the read command value of command phase for SRAM.*/
uint32_t reserved16: 12; /*reserved*/
uint32_t usr_rd_cmd_bitlen: 4; /*For SPI0 When cache mode is enable it is the length in bits of command phase for SRAM. The register value shall be (bit_num-1).*/
};
uint32_t val;
} sram_drd_cmd;
union {
struct {
uint32_t usr_wr_cmd_value: 16; /*For SPI0 When cache mode is enable it is the write command value of command phase for SRAM.*/
uint32_t reserved16: 12; /*reserved*/
uint32_t usr_wr_cmd_bitlen: 4; /*For SPI0 When cache mode is enable it is the in bits of command phase for SRAM. The register value shall be (bit_num-1).*/
};
uint32_t val;
} sram_dwr_cmd;
union {
struct {
uint32_t slv_rdata_bit:24; /*In the slave mode it is the bit length of read data. The value is the length - 1.*/
uint32_t reserved24: 8; /*reserved*/
};
uint32_t val;
} slv_rd_bit;
uint32_t reserved_68;
uint32_t reserved_6c;
uint32_t reserved_70;
uint32_t reserved_74;
uint32_t reserved_78;
uint32_t reserved_7c;
uint32_t data_buf[16]; /*data buffer*/
uint32_t tx_crc; /*For SPI1 the value of crc32 for 256 bits data.*/
uint32_t reserved_c4;
uint32_t reserved_c8;
uint32_t reserved_cc;
uint32_t reserved_d0;
uint32_t reserved_d4;
uint32_t reserved_d8;
uint32_t reserved_dc;
uint32_t reserved_e0;
uint32_t reserved_e4;
uint32_t reserved_e8;
uint32_t reserved_ec;
union {
struct {
uint32_t t_pp_time: 12; /*page program delay time by system clock.*/
uint32_t reserved12: 4; /*reserved*/
uint32_t t_pp_shift: 4; /*page program delay time shift .*/
uint32_t reserved20:11; /*reserved*/
uint32_t t_pp_ena: 1; /*page program delay enable.*/
};
uint32_t val;
} ext0;
union {
struct {
uint32_t t_erase_time: 12; /*erase flash delay time by system clock.*/
uint32_t reserved12: 4; /*reserved*/
uint32_t t_erase_shift: 4; /*erase flash delay time shift.*/
uint32_t reserved20: 11; /*reserved*/
uint32_t t_erase_ena: 1; /*erase flash delay enable.*/
};
uint32_t val;
} ext1;
union {
struct {
uint32_t st: 3; /*The status of spi state machine .*/
uint32_t reserved3: 29; /*reserved*/
};
uint32_t val;
} ext2;
union {
struct {
uint32_t int_hold_ena: 2; /*This register is for two SPI masters to share the same cs clock and data signals. The bits of one SPI are set if the other SPI is busy the SPI will be hold. 1(3): hold at ,idle, phase 2: hold at ,prepare, phase.*/
uint32_t reserved2: 30; /*reserved*/
};
uint32_t val;
} ext3;
union {
struct {
uint32_t reserved0: 2; /*reserved*/
uint32_t in_rst: 1; /*The bit is used to reset in dma fsm and in data fifo pointer.*/
uint32_t out_rst: 1; /*The bit is used to reset out dma fsm and out data fifo pointer.*/
uint32_t ahbm_fifo_rst: 1; /*reset spi dma ahb master fifo pointer.*/
uint32_t ahbm_rst: 1; /*reset spi dma ahb master.*/
uint32_t in_loop_test: 1; /*Set bit to test in link.*/
uint32_t out_loop_test: 1; /*Set bit to test out link.*/
uint32_t out_auto_wrback: 1; /*when the link is empty jump to next automatically.*/
uint32_t out_eof_mode: 1; /*out eof flag generation mode . 1: when dma pop all data from fifo 0:when ahb push all data to fifo.*/
uint32_t outdscr_burst_en: 1; /*read descriptor use burst mode when read data for memory.*/
uint32_t indscr_burst_en: 1; /*read descriptor use burst mode when write data to memory.*/
uint32_t out_data_burst_en: 1; /*spi dma read data from memory in burst mode.*/
uint32_t reserved13: 1; /*reserved*/
uint32_t dma_rx_stop: 1; /*spi dma read data stop when in continue tx/rx mode.*/
uint32_t dma_tx_stop: 1; /*spi dma write data stop when in continue tx/rx mode.*/
uint32_t dma_continue: 1; /*spi dma continue tx/rx data.*/
uint32_t reserved17: 15; /*reserved*/
};
uint32_t val;
} dma_conf;
union {
struct {
uint32_t addr: 20; /*The address of the first outlink descriptor.*/
uint32_t reserved20: 8; /*reserved*/
uint32_t stop: 1; /*Set the bit to stop to use outlink descriptor.*/
uint32_t start: 1; /*Set the bit to start to use outlink descriptor.*/
uint32_t restart: 1; /*Set the bit to mount on new outlink descriptors.*/
uint32_t reserved31: 1; /*reserved*/
};
uint32_t val;
} dma_out_link;
union {
struct {
uint32_t addr: 20; /*The address of the first inlink descriptor.*/
uint32_t auto_ret: 1; /*when the bit is set inlink descriptor returns to the next descriptor while a packet is wrong*/
uint32_t reserved21: 7; /*reserved*/
uint32_t stop: 1; /*Set the bit to stop to use inlink descriptor.*/
uint32_t start: 1; /*Set the bit to start to use inlink descriptor.*/
uint32_t restart: 1; /*Set the bit to mount on new inlink descriptors.*/
uint32_t reserved31: 1; /*reserved*/
};
uint32_t val;
} dma_in_link;
union {
struct {
uint32_t rx_en: 1; /*spi dma read data status bit.*/
uint32_t tx_en: 1; /*spi dma write data status bit.*/
uint32_t reserved2: 30; /*spi dma read data from memory count.*/
};
uint32_t val;
} dma_status;
union {
struct {
uint32_t inlink_dscr_empty: 1; /*The enable bit for lack of enough inlink descriptors.*/
uint32_t outlink_dscr_error: 1; /*The enable bit for outlink descriptor error.*/
uint32_t inlink_dscr_error: 1; /*The enable bit for inlink descriptor error.*/
uint32_t in_done: 1; /*The enable bit for completing usage of a inlink descriptor.*/
uint32_t in_err_eof: 1; /*The enable bit for receiving error.*/
uint32_t in_suc_eof: 1; /*The enable bit for completing receiving all the packets from host.*/
uint32_t out_done: 1; /*The enable bit for completing usage of a outlink descriptor .*/
uint32_t out_eof: 1; /*The enable bit for sending a packet to host done.*/
uint32_t out_total_eof: 1; /*The enable bit for sending all the packets to host done.*/
uint32_t reserved9: 23; /*reserved*/
};
uint32_t val;
} dma_int_ena;
union {
struct {
uint32_t inlink_dscr_empty: 1; /*The raw bit for lack of enough inlink descriptors.*/
uint32_t outlink_dscr_error: 1; /*The raw bit for outlink descriptor error.*/
uint32_t inlink_dscr_error: 1; /*The raw bit for inlink descriptor error.*/
uint32_t in_done: 1; /*The raw bit for completing usage of a inlink descriptor.*/
uint32_t in_err_eof: 1; /*The raw bit for receiving error.*/
uint32_t in_suc_eof: 1; /*The raw bit for completing receiving all the packets from host.*/
uint32_t out_done: 1; /*The raw bit for completing usage of a outlink descriptor.*/
uint32_t out_eof: 1; /*The raw bit for sending a packet to host done.*/
uint32_t out_total_eof: 1; /*The raw bit for sending all the packets to host done.*/
uint32_t reserved9: 23; /*reserved*/
};
uint32_t val;
} dma_int_raw;
union {
struct {
uint32_t inlink_dscr_empty: 1; /*The status bit for lack of enough inlink descriptors.*/
uint32_t outlink_dscr_error: 1; /*The status bit for outlink descriptor error.*/
uint32_t inlink_dscr_error: 1; /*The status bit for inlink descriptor error.*/
uint32_t in_done: 1; /*The status bit for completing usage of a inlink descriptor.*/
uint32_t in_err_eof: 1; /*The status bit for receiving error.*/
uint32_t in_suc_eof: 1; /*The status bit for completing receiving all the packets from host.*/
uint32_t out_done: 1; /*The status bit for completing usage of a outlink descriptor.*/
uint32_t out_eof: 1; /*The status bit for sending a packet to host done.*/
uint32_t out_total_eof: 1; /*The status bit for sending all the packets to host done.*/
uint32_t reserved9: 23; /*reserved*/
};
uint32_t val;
} dma_int_st;
union {
struct {
uint32_t inlink_dscr_empty: 1; /*The clear bit for lack of enough inlink descriptors.*/
uint32_t outlink_dscr_error: 1; /*The clear bit for outlink descriptor error.*/
uint32_t inlink_dscr_error: 1; /*The clear bit for inlink descriptor error.*/
uint32_t in_done: 1; /*The clear bit for completing usage of a inlink descriptor.*/
uint32_t in_err_eof: 1; /*The clear bit for receiving error.*/
uint32_t in_suc_eof: 1; /*The clear bit for completing receiving all the packets from host.*/
uint32_t out_done: 1; /*The clear bit for completing usage of a outlink descriptor.*/
uint32_t out_eof: 1; /*The clear bit for sending a packet to host done.*/
uint32_t out_total_eof: 1; /*The clear bit for sending all the packets to host done.*/
uint32_t reserved9: 23; /*reserved*/
};
uint32_t val;
} dma_int_clr;
uint32_t dma_in_err_eof_des_addr; /*The inlink descriptor address when spi dma produce receiving error.*/
uint32_t dma_in_suc_eof_des_addr; /*The last inlink descriptor address when spi dma produce from_suc_eof.*/
uint32_t dma_inlink_dscr; /*The content of current in descriptor pointer.*/
uint32_t dma_inlink_dscr_bf0; /*The content of next in descriptor pointer.*/
uint32_t dma_inlink_dscr_bf1; /*The content of current in descriptor data buffer pointer.*/
uint32_t dma_out_eof_bfr_des_addr; /*The address of buffer relative to the outlink descriptor that produce eof.*/
uint32_t dma_out_eof_des_addr; /*The last outlink descriptor address when spi dma produce to_eof.*/
uint32_t dma_outlink_dscr; /*The content of current out descriptor pointer.*/
uint32_t dma_outlink_dscr_bf0; /*The content of next out descriptor pointer.*/
uint32_t dma_outlink_dscr_bf1; /*The content of current out descriptor data buffer pointer.*/
uint32_t dma_rx_status; /*spi dma read data from memory status.*/
uint32_t dma_tx_status; /*spi dma write data to memory status.*/
uint32_t reserved_150;
uint32_t reserved_154;
uint32_t reserved_158;
uint32_t reserved_15c;
uint32_t reserved_160;
uint32_t reserved_164;
uint32_t reserved_168;
uint32_t reserved_16c;
uint32_t reserved_170;
uint32_t reserved_174;
uint32_t reserved_178;
uint32_t reserved_17c;
uint32_t reserved_180;
uint32_t reserved_184;
uint32_t reserved_188;
uint32_t reserved_18c;
uint32_t reserved_190;
uint32_t reserved_194;
uint32_t reserved_198;
uint32_t reserved_19c;
uint32_t reserved_1a0;
uint32_t reserved_1a4;
uint32_t reserved_1a8;
uint32_t reserved_1ac;
uint32_t reserved_1b0;
uint32_t reserved_1b4;
uint32_t reserved_1b8;
uint32_t reserved_1bc;
uint32_t reserved_1c0;
uint32_t reserved_1c4;
uint32_t reserved_1c8;
uint32_t reserved_1cc;
uint32_t reserved_1d0;
uint32_t reserved_1d4;
uint32_t reserved_1d8;
uint32_t reserved_1dc;
uint32_t reserved_1e0;
uint32_t reserved_1e4;
uint32_t reserved_1e8;
uint32_t reserved_1ec;
uint32_t reserved_1f0;
uint32_t reserved_1f4;
uint32_t reserved_1f8;
uint32_t reserved_1fc;
uint32_t reserved_200;
uint32_t reserved_204;
uint32_t reserved_208;
uint32_t reserved_20c;
uint32_t reserved_210;
uint32_t reserved_214;
uint32_t reserved_218;
uint32_t reserved_21c;
uint32_t reserved_220;
uint32_t reserved_224;
uint32_t reserved_228;
uint32_t reserved_22c;
uint32_t reserved_230;
uint32_t reserved_234;
uint32_t reserved_238;
uint32_t reserved_23c;
uint32_t reserved_240;
uint32_t reserved_244;
uint32_t reserved_248;
uint32_t reserved_24c;
uint32_t reserved_250;
uint32_t reserved_254;
uint32_t reserved_258;
uint32_t reserved_25c;
uint32_t reserved_260;
uint32_t reserved_264;
uint32_t reserved_268;
uint32_t reserved_26c;
uint32_t reserved_270;
uint32_t reserved_274;
uint32_t reserved_278;
uint32_t reserved_27c;
uint32_t reserved_280;
uint32_t reserved_284;
uint32_t reserved_288;
uint32_t reserved_28c;
uint32_t reserved_290;
uint32_t reserved_294;
uint32_t reserved_298;
uint32_t reserved_29c;
uint32_t reserved_2a0;
uint32_t reserved_2a4;
uint32_t reserved_2a8;
uint32_t reserved_2ac;
uint32_t reserved_2b0;
uint32_t reserved_2b4;
uint32_t reserved_2b8;
uint32_t reserved_2bc;
uint32_t reserved_2c0;
uint32_t reserved_2c4;
uint32_t reserved_2c8;
uint32_t reserved_2cc;
uint32_t reserved_2d0;
uint32_t reserved_2d4;
uint32_t reserved_2d8;
uint32_t reserved_2dc;
uint32_t reserved_2e0;
uint32_t reserved_2e4;
uint32_t reserved_2e8;
uint32_t reserved_2ec;
uint32_t reserved_2f0;
uint32_t reserved_2f4;
uint32_t reserved_2f8;
uint32_t reserved_2fc;
uint32_t reserved_300;
uint32_t reserved_304;
uint32_t reserved_308;
uint32_t reserved_30c;
uint32_t reserved_310;
uint32_t reserved_314;
uint32_t reserved_318;
uint32_t reserved_31c;
uint32_t reserved_320;
uint32_t reserved_324;
uint32_t reserved_328;
uint32_t reserved_32c;
uint32_t reserved_330;
uint32_t reserved_334;
uint32_t reserved_338;
uint32_t reserved_33c;
uint32_t reserved_340;
uint32_t reserved_344;
uint32_t reserved_348;
uint32_t reserved_34c;
uint32_t reserved_350;
uint32_t reserved_354;
uint32_t reserved_358;
uint32_t reserved_35c;
uint32_t reserved_360;
uint32_t reserved_364;
uint32_t reserved_368;
uint32_t reserved_36c;
uint32_t reserved_370;
uint32_t reserved_374;
uint32_t reserved_378;
uint32_t reserved_37c;
uint32_t reserved_380;
uint32_t reserved_384;
uint32_t reserved_388;
uint32_t reserved_38c;
uint32_t reserved_390;
uint32_t reserved_394;
uint32_t reserved_398;
uint32_t reserved_39c;
uint32_t reserved_3a0;
uint32_t reserved_3a4;
uint32_t reserved_3a8;
uint32_t reserved_3ac;
uint32_t reserved_3b0;
uint32_t reserved_3b4;
uint32_t reserved_3b8;
uint32_t reserved_3bc;
uint32_t reserved_3c0;
uint32_t reserved_3c4;
uint32_t reserved_3c8;
uint32_t reserved_3cc;
uint32_t reserved_3d0;
uint32_t reserved_3d4;
uint32_t reserved_3d8;
uint32_t reserved_3dc;
uint32_t reserved_3e0;
uint32_t reserved_3e4;
uint32_t reserved_3e8;
uint32_t reserved_3ec;
uint32_t reserved_3f0;
uint32_t reserved_3f4;
uint32_t reserved_3f8;
union {
struct {
uint32_t date: 28; /*SPI register version.*/
uint32_t reserved28: 4; /*reserved*/
};
uint32_t val;
} date;
} spi_dev_t;
extern spi_dev_t SPI0; /* SPI0 IS FOR INTERNAL USE*/
extern spi_dev_t SPI1;
extern spi_dev_t SPI2;
extern spi_dev_t SPI3;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_SPI_STRUCT_H_ */

294
tools/sdk/esp32/include/soc/soc/esp32/include/soc/syscon_reg.h Normal file
View File

@ -0,0 +1,294 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_SYSCON_REG_H_
#define _SOC_SYSCON_REG_H_
#include "soc.h"
#define SYSCON_SYSCLK_CONF_REG (DR_REG_SYSCON_BASE + 0x0)
/* SYSCON_QUICK_CLK_CHNG : R/W ;bitpos:[13] ;default: 1'b1 ; */
/*description: */
#define SYSCON_QUICK_CLK_CHNG (BIT(13))
#define SYSCON_QUICK_CLK_CHNG_M (BIT(13))
#define SYSCON_QUICK_CLK_CHNG_V 0x1
#define SYSCON_QUICK_CLK_CHNG_S 13
/* SYSCON_RST_TICK_CNT : R/W ;bitpos:[12] ;default: 1'b0 ; */
/*description: */
#define SYSCON_RST_TICK_CNT (BIT(12))
#define SYSCON_RST_TICK_CNT_M (BIT(12))
#define SYSCON_RST_TICK_CNT_V 0x1
#define SYSCON_RST_TICK_CNT_S 12
/* SYSCON_CLK_EN : R/W ;bitpos:[11] ;default: 1'b0 ; */
/*description: */
#define SYSCON_CLK_EN (BIT(11))
#define SYSCON_CLK_EN_M (BIT(11))
#define SYSCON_CLK_EN_V 0x1
#define SYSCON_CLK_EN_S 11
/* SYSCON_CLK_320M_EN : R/W ;bitpos:[10] ;default: 1'b0 ; */
/*description: */
#define SYSCON_CLK_320M_EN (BIT(10))
#define SYSCON_CLK_320M_EN_M (BIT(10))
#define SYSCON_CLK_320M_EN_V 0x1
#define SYSCON_CLK_320M_EN_S 10
/* SYSCON_PRE_DIV_CNT : R/W ;bitpos:[9:0] ;default: 10'h0 ; */
/*description: */
#define SYSCON_PRE_DIV_CNT 0x000003FF
#define SYSCON_PRE_DIV_CNT_M ((SYSCON_PRE_DIV_CNT_V)<<(SYSCON_PRE_DIV_CNT_S))
#define SYSCON_PRE_DIV_CNT_V 0x3FF
#define SYSCON_PRE_DIV_CNT_S 0
#define SYSCON_XTAL_TICK_CONF_REG (DR_REG_SYSCON_BASE + 0x4)
/* SYSCON_XTAL_TICK_NUM : R/W ;bitpos:[7:0] ;default: 8'd39 ; */
/*description: */
#define SYSCON_XTAL_TICK_NUM 0x000000FF
#define SYSCON_XTAL_TICK_NUM_M ((SYSCON_XTAL_TICK_NUM_V)<<(SYSCON_XTAL_TICK_NUM_S))
#define SYSCON_XTAL_TICK_NUM_V 0xFF
#define SYSCON_XTAL_TICK_NUM_S 0
#define SYSCON_PLL_TICK_CONF_REG (DR_REG_SYSCON_BASE + 0x8)
/* SYSCON_PLL_TICK_NUM : R/W ;bitpos:[7:0] ;default: 8'd79 ; */
/*description: */
#define SYSCON_PLL_TICK_NUM 0x000000FF
#define SYSCON_PLL_TICK_NUM_M ((SYSCON_PLL_TICK_NUM_V)<<(SYSCON_PLL_TICK_NUM_S))
#define SYSCON_PLL_TICK_NUM_V 0xFF
#define SYSCON_PLL_TICK_NUM_S 0
#define SYSCON_CK8M_TICK_CONF_REG (DR_REG_SYSCON_BASE + 0xC)
/* SYSCON_CK8M_TICK_NUM : R/W ;bitpos:[7:0] ;default: 8'd11 ; */
/*description: */
#define SYSCON_CK8M_TICK_NUM 0x000000FF
#define SYSCON_CK8M_TICK_NUM_M ((SYSCON_CK8M_TICK_NUM_V)<<(SYSCON_CK8M_TICK_NUM_S))
#define SYSCON_CK8M_TICK_NUM_V 0xFF
#define SYSCON_CK8M_TICK_NUM_S 0
#define SYSCON_SARADC_CTRL_REG (DR_REG_SYSCON_BASE + 0x10)
/* SYSCON_SARADC_DATA_TO_I2S : R/W ;bitpos:[26] ;default: 1'b0 ; */
/*description: 1: I2S input data is from SAR ADC (for DMA) 0: I2S input data
is from GPIO matrix*/
#define SYSCON_SARADC_DATA_TO_I2S (BIT(26))
#define SYSCON_SARADC_DATA_TO_I2S_M (BIT(26))
#define SYSCON_SARADC_DATA_TO_I2S_V 0x1
#define SYSCON_SARADC_DATA_TO_I2S_S 26
/* SYSCON_SARADC_DATA_SAR_SEL : R/W ;bitpos:[25] ;default: 1'b0 ; */
/*description: 1: sar_sel will be coded by the MSB of the 16-bit output data
in this case the resolution should not be larger than 11 bits.*/
#define SYSCON_SARADC_DATA_SAR_SEL (BIT(25))
#define SYSCON_SARADC_DATA_SAR_SEL_M (BIT(25))
#define SYSCON_SARADC_DATA_SAR_SEL_V 0x1
#define SYSCON_SARADC_DATA_SAR_SEL_S 25
/* SYSCON_SARADC_SAR2_PATT_P_CLEAR : R/W ;bitpos:[24] ;default: 1'd0 ; */
/*description: clear the pointer of pattern table for DIG ADC2 CTRL*/
#define SYSCON_SARADC_SAR2_PATT_P_CLEAR (BIT(24))
#define SYSCON_SARADC_SAR2_PATT_P_CLEAR_M (BIT(24))
#define SYSCON_SARADC_SAR2_PATT_P_CLEAR_V 0x1
#define SYSCON_SARADC_SAR2_PATT_P_CLEAR_S 24
/* SYSCON_SARADC_SAR1_PATT_P_CLEAR : R/W ;bitpos:[23] ;default: 1'd0 ; */
/*description: clear the pointer of pattern table for DIG ADC1 CTRL*/
#define SYSCON_SARADC_SAR1_PATT_P_CLEAR (BIT(23))
#define SYSCON_SARADC_SAR1_PATT_P_CLEAR_M (BIT(23))
#define SYSCON_SARADC_SAR1_PATT_P_CLEAR_V 0x1
#define SYSCON_SARADC_SAR1_PATT_P_CLEAR_S 23
/* SYSCON_SARADC_SAR2_PATT_LEN : R/W ;bitpos:[22:19] ;default: 4'd15 ; */
/*description: 0 ~ 15 means length 1 ~ 16*/
#define SYSCON_SARADC_SAR2_PATT_LEN 0x0000000F
#define SYSCON_SARADC_SAR2_PATT_LEN_M ((SYSCON_SARADC_SAR2_PATT_LEN_V)<<(SYSCON_SARADC_SAR2_PATT_LEN_S))
#define SYSCON_SARADC_SAR2_PATT_LEN_V 0xF
#define SYSCON_SARADC_SAR2_PATT_LEN_S 19
/* SYSCON_SARADC_SAR1_PATT_LEN : R/W ;bitpos:[18:15] ;default: 4'd15 ; */
/*description: 0 ~ 15 means length 1 ~ 16*/
#define SYSCON_SARADC_SAR1_PATT_LEN 0x0000000F
#define SYSCON_SARADC_SAR1_PATT_LEN_M ((SYSCON_SARADC_SAR1_PATT_LEN_V)<<(SYSCON_SARADC_SAR1_PATT_LEN_S))
#define SYSCON_SARADC_SAR1_PATT_LEN_V 0xF
#define SYSCON_SARADC_SAR1_PATT_LEN_S 15
/* SYSCON_SARADC_SAR_CLK_DIV : R/W ;bitpos:[14:7] ;default: 8'd4 ; */
/*description: SAR clock divider*/
#define SYSCON_SARADC_SAR_CLK_DIV 0x000000FF
#define SYSCON_SARADC_SAR_CLK_DIV_M ((SYSCON_SARADC_SAR_CLK_DIV_V)<<(SYSCON_SARADC_SAR_CLK_DIV_S))
#define SYSCON_SARADC_SAR_CLK_DIV_V 0xFF
#define SYSCON_SARADC_SAR_CLK_DIV_S 7
/* SYSCON_SARADC_SAR_CLK_GATED : R/W ;bitpos:[6] ;default: 1'b1 ; */
/*description: */
#define SYSCON_SARADC_SAR_CLK_GATED (BIT(6))
#define SYSCON_SARADC_SAR_CLK_GATED_M (BIT(6))
#define SYSCON_SARADC_SAR_CLK_GATED_V 0x1
#define SYSCON_SARADC_SAR_CLK_GATED_S 6
/* SYSCON_SARADC_SAR_SEL : R/W ;bitpos:[5] ;default: 1'd0 ; */
/*description: 0: SAR1 1: SAR2 only work for single SAR mode*/
#define SYSCON_SARADC_SAR_SEL (BIT(5))
#define SYSCON_SARADC_SAR_SEL_M (BIT(5))
#define SYSCON_SARADC_SAR_SEL_V 0x1
#define SYSCON_SARADC_SAR_SEL_S 5
/* SYSCON_SARADC_WORK_MODE : R/W ;bitpos:[4:3] ;default: 2'd0 ; */
/*description: 0: single mode 1: double mode 2: alternate mode*/
#define SYSCON_SARADC_WORK_MODE 0x00000003
#define SYSCON_SARADC_WORK_MODE_M ((SYSCON_SARADC_WORK_MODE_V)<<(SYSCON_SARADC_WORK_MODE_S))
#define SYSCON_SARADC_WORK_MODE_V 0x3
#define SYSCON_SARADC_WORK_MODE_S 3
/* SYSCON_SARADC_SAR2_MUX : R/W ;bitpos:[2] ;default: 1'd0 ; */
/*description: 1: SAR ADC2 is controlled by DIG ADC2 CTRL 0: SAR ADC2 is controlled
by PWDET CTRL*/
#define SYSCON_SARADC_SAR2_MUX (BIT(2))
#define SYSCON_SARADC_SAR2_MUX_M (BIT(2))
#define SYSCON_SARADC_SAR2_MUX_V 0x1
#define SYSCON_SARADC_SAR2_MUX_S 2
/* SYSCON_SARADC_START : R/W ;bitpos:[1] ;default: 1'd0 ; */
/*description: */
#define SYSCON_SARADC_START (BIT(1))
#define SYSCON_SARADC_START_M (BIT(1))
#define SYSCON_SARADC_START_V 0x1
#define SYSCON_SARADC_START_S 1
/* SYSCON_SARADC_START_FORCE : R/W ;bitpos:[0] ;default: 1'd0 ; */
/*description: */
#define SYSCON_SARADC_START_FORCE (BIT(0))
#define SYSCON_SARADC_START_FORCE_M (BIT(0))
#define SYSCON_SARADC_START_FORCE_V 0x1
#define SYSCON_SARADC_START_FORCE_S 0
#define SYSCON_SARADC_CTRL2_REG (DR_REG_SYSCON_BASE + 0x14)
/* SYSCON_SARADC_SAR2_INV : R/W ;bitpos:[10] ;default: 1'd0 ; */
/*description: 1: data to DIG ADC2 CTRL is inverted otherwise not*/
#define SYSCON_SARADC_SAR2_INV (BIT(10))
#define SYSCON_SARADC_SAR2_INV_M (BIT(10))
#define SYSCON_SARADC_SAR2_INV_V 0x1
#define SYSCON_SARADC_SAR2_INV_S 10
/* SYSCON_SARADC_SAR1_INV : R/W ;bitpos:[9] ;default: 1'd0 ; */
/*description: 1: data to DIG ADC1 CTRL is inverted otherwise not*/
#define SYSCON_SARADC_SAR1_INV (BIT(9))
#define SYSCON_SARADC_SAR1_INV_M (BIT(9))
#define SYSCON_SARADC_SAR1_INV_V 0x1
#define SYSCON_SARADC_SAR1_INV_S 9
/* SYSCON_SARADC_MAX_MEAS_NUM : R/W ;bitpos:[8:1] ;default: 8'd255 ; */
/*description: max conversion number*/
#define SYSCON_SARADC_MAX_MEAS_NUM 0x000000FF
#define SYSCON_SARADC_MAX_MEAS_NUM_M ((SYSCON_SARADC_MAX_MEAS_NUM_V)<<(SYSCON_SARADC_MAX_MEAS_NUM_S))
#define SYSCON_SARADC_MAX_MEAS_NUM_V 0xFF
#define SYSCON_SARADC_MAX_MEAS_NUM_S 1
/* SYSCON_SARADC_MEAS_NUM_LIMIT : R/W ;bitpos:[0] ;default: 1'd0 ; */
/*description: */
#define SYSCON_SARADC_MEAS_NUM_LIMIT (BIT(0))
#define SYSCON_SARADC_MEAS_NUM_LIMIT_M (BIT(0))
#define SYSCON_SARADC_MEAS_NUM_LIMIT_V 0x1
#define SYSCON_SARADC_MEAS_NUM_LIMIT_S 0
#define SYSCON_SARADC_FSM_REG (DR_REG_SYSCON_BASE + 0x18)
/* SYSCON_SARADC_SAMPLE_CYCLE : R/W ;bitpos:[31:24] ;default: 8'd2 ; */
/*description: sample cycles*/
#define SYSCON_SARADC_SAMPLE_CYCLE 0x000000FF
#define SYSCON_SARADC_SAMPLE_CYCLE_M ((SYSCON_SARADC_SAMPLE_CYCLE_V)<<(SYSCON_SARADC_SAMPLE_CYCLE_S))
#define SYSCON_SARADC_SAMPLE_CYCLE_V 0xFF
#define SYSCON_SARADC_SAMPLE_CYCLE_S 24
/* SYSCON_SARADC_START_WAIT : R/W ;bitpos:[23:16] ;default: 8'd8 ; */
/*description: */
#define SYSCON_SARADC_START_WAIT 0x000000FF
#define SYSCON_SARADC_START_WAIT_M ((SYSCON_SARADC_START_WAIT_V)<<(SYSCON_SARADC_START_WAIT_S))
#define SYSCON_SARADC_START_WAIT_V 0xFF
#define SYSCON_SARADC_START_WAIT_S 16
/* SYSCON_SARADC_STANDBY_WAIT : R/W ;bitpos:[15:8] ;default: 8'd255 ; */
/*description: */
#define SYSCON_SARADC_STANDBY_WAIT 0x000000FF
#define SYSCON_SARADC_STANDBY_WAIT_M ((SYSCON_SARADC_STANDBY_WAIT_V)<<(SYSCON_SARADC_STANDBY_WAIT_S))
#define SYSCON_SARADC_STANDBY_WAIT_V 0xFF
#define SYSCON_SARADC_STANDBY_WAIT_S 8
/* SYSCON_SARADC_RSTB_WAIT : R/W ;bitpos:[7:0] ;default: 8'd8 ; */
/*description: */
#define SYSCON_SARADC_RSTB_WAIT 0x000000FF
#define SYSCON_SARADC_RSTB_WAIT_M ((SYSCON_SARADC_RSTB_WAIT_V)<<(SYSCON_SARADC_RSTB_WAIT_S))
#define SYSCON_SARADC_RSTB_WAIT_V 0xFF
#define SYSCON_SARADC_RSTB_WAIT_S 0
#define SYSCON_SARADC_SAR1_PATT_TAB1_REG (DR_REG_SYSCON_BASE + 0x1C)
/* SYSCON_SARADC_SAR1_PATT_TAB1 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: item 0 ~ 3 for pattern table 1 (each item one byte)*/
#define SYSCON_SARADC_SAR1_PATT_TAB1 0xFFFFFFFF
#define SYSCON_SARADC_SAR1_PATT_TAB1_M ((SYSCON_SARADC_SAR1_PATT_TAB1_V)<<(SYSCON_SARADC_SAR1_PATT_TAB1_S))
#define SYSCON_SARADC_SAR1_PATT_TAB1_V 0xFFFFFFFF
#define SYSCON_SARADC_SAR1_PATT_TAB1_S 0
#define SYSCON_SARADC_SAR1_PATT_TAB2_REG (DR_REG_SYSCON_BASE + 0x20)
/* SYSCON_SARADC_SAR1_PATT_TAB2 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 4 ~ 7 for pattern table 1 (each item one byte)*/
#define SYSCON_SARADC_SAR1_PATT_TAB2 0xFFFFFFFF
#define SYSCON_SARADC_SAR1_PATT_TAB2_M ((SYSCON_SARADC_SAR1_PATT_TAB2_V)<<(SYSCON_SARADC_SAR1_PATT_TAB2_S))
#define SYSCON_SARADC_SAR1_PATT_TAB2_V 0xFFFFFFFF
#define SYSCON_SARADC_SAR1_PATT_TAB2_S 0
#define SYSCON_SARADC_SAR1_PATT_TAB3_REG (DR_REG_SYSCON_BASE + 0x24)
/* SYSCON_SARADC_SAR1_PATT_TAB3 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 8 ~ 11 for pattern table 1 (each item one byte)*/
#define SYSCON_SARADC_SAR1_PATT_TAB3 0xFFFFFFFF
#define SYSCON_SARADC_SAR1_PATT_TAB3_M ((SYSCON_SARADC_SAR1_PATT_TAB3_V)<<(SYSCON_SARADC_SAR1_PATT_TAB3_S))
#define SYSCON_SARADC_SAR1_PATT_TAB3_V 0xFFFFFFFF
#define SYSCON_SARADC_SAR1_PATT_TAB3_S 0
#define SYSCON_SARADC_SAR1_PATT_TAB4_REG (DR_REG_SYSCON_BASE + 0x28)
/* SYSCON_SARADC_SAR1_PATT_TAB4 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 12 ~ 15 for pattern table 1 (each item one byte)*/
#define SYSCON_SARADC_SAR1_PATT_TAB4 0xFFFFFFFF
#define SYSCON_SARADC_SAR1_PATT_TAB4_M ((SYSCON_SARADC_SAR1_PATT_TAB4_V)<<(SYSCON_SARADC_SAR1_PATT_TAB4_S))
#define SYSCON_SARADC_SAR1_PATT_TAB4_V 0xFFFFFFFF
#define SYSCON_SARADC_SAR1_PATT_TAB4_S 0
#define SYSCON_SARADC_SAR2_PATT_TAB1_REG (DR_REG_SYSCON_BASE + 0x2C)
/* SYSCON_SARADC_SAR2_PATT_TAB1 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: item 0 ~ 3 for pattern table 2 (each item one byte)*/
#define SYSCON_SARADC_SAR2_PATT_TAB1 0xFFFFFFFF
#define SYSCON_SARADC_SAR2_PATT_TAB1_M ((SYSCON_SARADC_SAR2_PATT_TAB1_V)<<(SYSCON_SARADC_SAR2_PATT_TAB1_S))
#define SYSCON_SARADC_SAR2_PATT_TAB1_V 0xFFFFFFFF
#define SYSCON_SARADC_SAR2_PATT_TAB1_S 0
#define SYSCON_SARADC_SAR2_PATT_TAB2_REG (DR_REG_SYSCON_BASE + 0x30)
/* SYSCON_SARADC_SAR2_PATT_TAB2 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 4 ~ 7 for pattern table 2 (each item one byte)*/
#define SYSCON_SARADC_SAR2_PATT_TAB2 0xFFFFFFFF
#define SYSCON_SARADC_SAR2_PATT_TAB2_M ((SYSCON_SARADC_SAR2_PATT_TAB2_V)<<(SYSCON_SARADC_SAR2_PATT_TAB2_S))
#define SYSCON_SARADC_SAR2_PATT_TAB2_V 0xFFFFFFFF
#define SYSCON_SARADC_SAR2_PATT_TAB2_S 0
#define SYSCON_SARADC_SAR2_PATT_TAB3_REG (DR_REG_SYSCON_BASE + 0x34)
/* SYSCON_SARADC_SAR2_PATT_TAB3 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 8 ~ 11 for pattern table 2 (each item one byte)*/
#define SYSCON_SARADC_SAR2_PATT_TAB3 0xFFFFFFFF
#define SYSCON_SARADC_SAR2_PATT_TAB3_M ((SYSCON_SARADC_SAR2_PATT_TAB3_V)<<(SYSCON_SARADC_SAR2_PATT_TAB3_S))
#define SYSCON_SARADC_SAR2_PATT_TAB3_V 0xFFFFFFFF
#define SYSCON_SARADC_SAR2_PATT_TAB3_S 0
#define SYSCON_SARADC_SAR2_PATT_TAB4_REG (DR_REG_SYSCON_BASE + 0x38)
/* SYSCON_SARADC_SAR2_PATT_TAB4 : R/W ;bitpos:[31:0] ;default: 32'hf0f0f0f ; */
/*description: Item 12 ~ 15 for pattern table 2 (each item one byte)*/
#define SYSCON_SARADC_SAR2_PATT_TAB4 0xFFFFFFFF
#define SYSCON_SARADC_SAR2_PATT_TAB4_M ((SYSCON_SARADC_SAR2_PATT_TAB4_V)<<(SYSCON_SARADC_SAR2_PATT_TAB4_S))
#define SYSCON_SARADC_SAR2_PATT_TAB4_V 0xFFFFFFFF
#define SYSCON_SARADC_SAR2_PATT_TAB4_S 0
#define SYSCON_APLL_TICK_CONF_REG (DR_REG_SYSCON_BASE + 0x3C)
/* SYSCON_APLL_TICK_NUM : R/W ;bitpos:[7:0] ;default: 8'd99 ; */
/*description: */
#define SYSCON_APLL_TICK_NUM 0x000000FF
#define SYSCON_APLL_TICK_NUM_M ((SYSCON_APLL_TICK_NUM_V)<<(SYSCON_APLL_TICK_NUM_S))
#define SYSCON_APLL_TICK_NUM_V 0xFF
#define SYSCON_APLL_TICK_NUM_S 0
#define SYSCON_DATE_REG (DR_REG_SYSCON_BASE + 0x7C)
/* SYSCON_DATE : R/W ;bitpos:[31:0] ;default: 32'h16042000 ; */
/*description: */
#define SYSCON_DATE 0xFFFFFFFF
#define SYSCON_DATE_M ((SYSCON_DATE_V)<<(SYSCON_DATE_S))
#define SYSCON_DATE_V 0xFFFFFFFF
#define SYSCON_DATE_S 0
#endif /*_SOC_SYSCON_REG_H_ */

125
tools/sdk/esp32/include/soc/soc/esp32/include/soc/syscon_struct.h Normal file
View File

@ -0,0 +1,125 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_SYSCON_STRUCT_H_
#define _SOC_SYSCON_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct syscon_dev_s {
union {
struct {
uint32_t pre_div: 10;
uint32_t clk_320m_en: 1;
uint32_t clk_en: 1;
uint32_t rst_tick: 1;
uint32_t quick_clk_chng: 1;
uint32_t reserved14: 18;
};
uint32_t val;
}clk_conf;
union {
struct {
uint32_t xtal_tick: 8;
uint32_t reserved8: 24;
};
uint32_t val;
}xtal_tick_conf;
union {
struct {
uint32_t pll_tick: 8;
uint32_t reserved8: 24;
};
uint32_t val;
}pll_tick_conf;
union {
struct {
uint32_t ck8m_tick: 8;
uint32_t reserved8: 24;
};
uint32_t val;
}ck8m_tick_conf;
union {
struct {
uint32_t start_force: 1;
uint32_t start: 1;
uint32_t sar2_mux: 1; /*1: SAR ADC2 is controlled by DIG ADC2 CTRL 0: SAR ADC2 is controlled by PWDET CTRL*/
uint32_t work_mode: 2; /*0: single mode 1: double mode 2: alternate mode*/
uint32_t sar_sel: 1; /*0: SAR1 1: SAR2 only work for single SAR mode*/
uint32_t sar_clk_gated: 1;
uint32_t sar_clk_div: 8; /*SAR clock divider*/
uint32_t sar1_patt_len: 4; /*0 ~ 15 means length 1 ~ 16*/
uint32_t sar2_patt_len: 4; /*0 ~ 15 means length 1 ~ 16*/
uint32_t sar1_patt_p_clear: 1; /*clear the pointer of pattern table for DIG ADC1 CTRL*/
uint32_t sar2_patt_p_clear: 1; /*clear the pointer of pattern table for DIG ADC2 CTRL*/
uint32_t data_sar_sel: 1; /*1: sar_sel will be coded by the MSB of the 16-bit output data in this case the resolution should not be larger than 11 bits.*/
uint32_t data_to_i2s: 1; /*1: I2S input data is from SAR ADC (for DMA) 0: I2S input data is from GPIO matrix*/
uint32_t reserved27: 5;
};
uint32_t val;
}saradc_ctrl;
union {
struct {
uint32_t meas_num_limit: 1;
uint32_t max_meas_num: 8; /*max conversion number*/
uint32_t sar1_inv: 1; /*1: data to DIG ADC1 CTRL is inverted otherwise not*/
uint32_t sar2_inv: 1; /*1: data to DIG ADC2 CTRL is inverted otherwise not*/
uint32_t reserved11: 21;
};
uint32_t val;
}saradc_ctrl2;
union {
struct {
uint32_t rstb_wait: 8;
uint32_t standby_wait: 8;
uint32_t start_wait: 8;
uint32_t sample_cycle: 8; /*sample cycles*/
};
uint32_t val;
}saradc_fsm;
uint32_t saradc_sar1_patt_tab[4]; /*item 0 ~ 3 for ADC1 pattern table*/
uint32_t saradc_sar2_patt_tab[4]; /*item 0 ~ 3 for ADC2 pattern table*/
union {
struct {
uint32_t apll_tick: 8;
uint32_t reserved8: 24;
};
uint32_t val;
}apll_tick_conf;
uint32_t reserved_40;
uint32_t reserved_44;
uint32_t reserved_48;
uint32_t reserved_4c;
uint32_t reserved_50;
uint32_t reserved_54;
uint32_t reserved_58;
uint32_t reserved_5c;
uint32_t reserved_60;
uint32_t reserved_64;
uint32_t reserved_68;
uint32_t reserved_6c;
uint32_t reserved_70;
uint32_t reserved_74;
uint32_t reserved_78;
uint32_t date; /**/
} syscon_dev_t;
#ifdef __cplusplus
}
#endif
extern syscon_dev_t SYSCON;
#endif /* _SOC_SYSCON_STRUCT_H_ */

15
tools/sdk/esp32/include/soc/soc/esp32/include/soc/timer_group_caps.h Normal file
View File

@ -0,0 +1,15 @@
// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once

677
tools/sdk/esp32/include/soc/soc/esp32/include/soc/timer_group_reg.h Normal file
View File

@ -0,0 +1,677 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef __TIMG_REG_H__
#define __TIMG_REG_H__
#include "soc.h"
/* The value that needs to be written to TIMG_WDT_WKEY to write-enable the wdt registers */
#define TIMG_WDT_WKEY_VALUE 0x50D83AA1
/* Possible values for TIMG_WDT_STGx */
#define TIMG_WDT_STG_SEL_OFF 0
#define TIMG_WDT_STG_SEL_INT 1
#define TIMG_WDT_STG_SEL_RESET_CPU 2
#define TIMG_WDT_STG_SEL_RESET_SYSTEM 3
/* Possible values for TIMG_WDT_CPU_RESET_LENGTH and TIMG_WDT_SYS_RESET_LENGTH */
#define TIMG_WDT_RESET_LENGTH_100_NS 0
#define TIMG_WDT_RESET_LENGTH_200_NS 1
#define TIMG_WDT_RESET_LENGTH_300_NS 2
#define TIMG_WDT_RESET_LENGTH_400_NS 3
#define TIMG_WDT_RESET_LENGTH_500_NS 4
#define TIMG_WDT_RESET_LENGTH_800_NS 5
#define TIMG_WDT_RESET_LENGTH_1600_NS 6
#define TIMG_WDT_RESET_LENGTH_3200_NS 7
#define REG_TIMG_BASE(i) (DR_REG_TIMERGROUP0_BASE + i*0x1000)
#define TIMG_T0CONFIG_REG(i) (REG_TIMG_BASE(i) + 0x0000)
/* TIMG_T0_EN : R/W ;bitpos:[31] ;default: 1'h0 ; */
/*description: When set timer 0 time-base counter is enabled*/
#define TIMG_T0_EN (BIT(31))
#define TIMG_T0_EN_M (BIT(31))
#define TIMG_T0_EN_V 0x1
#define TIMG_T0_EN_S 31
/* TIMG_T0_INCREASE : R/W ;bitpos:[30] ;default: 1'h1 ; */
/*description: When set timer 0 time-base counter increment. When cleared timer
0 time-base counter decrement.*/
#define TIMG_T0_INCREASE (BIT(30))
#define TIMG_T0_INCREASE_M (BIT(30))
#define TIMG_T0_INCREASE_V 0x1
#define TIMG_T0_INCREASE_S 30
/* TIMG_T0_AUTORELOAD : R/W ;bitpos:[29] ;default: 1'h1 ; */
/*description: When set timer 0 auto-reload at alarming is enabled*/
#define TIMG_T0_AUTORELOAD (BIT(29))
#define TIMG_T0_AUTORELOAD_M (BIT(29))
#define TIMG_T0_AUTORELOAD_V 0x1
#define TIMG_T0_AUTORELOAD_S 29
/* TIMG_T0_DIVIDER : R/W ;bitpos:[28:13] ;default: 16'h1 ; */
/*description: Timer 0 clock (T0_clk) prescale value.*/
#define TIMG_T0_DIVIDER 0x0000FFFF
#define TIMG_T0_DIVIDER_M ((TIMG_T0_DIVIDER_V)<<(TIMG_T0_DIVIDER_S))
#define TIMG_T0_DIVIDER_V 0xFFFF
#define TIMG_T0_DIVIDER_S 13
/* TIMG_T0_EDGE_INT_EN : R/W ;bitpos:[12] ;default: 1'h0 ; */
/*description: When set edge type interrupt will be generated during alarm*/
#define TIMG_T0_EDGE_INT_EN (BIT(12))
#define TIMG_T0_EDGE_INT_EN_M (BIT(12))
#define TIMG_T0_EDGE_INT_EN_V 0x1
#define TIMG_T0_EDGE_INT_EN_S 12
/* TIMG_T0_LEVEL_INT_EN : R/W ;bitpos:[11] ;default: 1'h0 ; */
/*description: When set level type interrupt will be generated during alarm*/
#define TIMG_T0_LEVEL_INT_EN (BIT(11))
#define TIMG_T0_LEVEL_INT_EN_M (BIT(11))
#define TIMG_T0_LEVEL_INT_EN_V 0x1
#define TIMG_T0_LEVEL_INT_EN_S 11
/* TIMG_T0_ALARM_EN : R/W ;bitpos:[10] ;default: 1'h0 ; */
/*description: When set alarm is enabled*/
#define TIMG_T0_ALARM_EN (BIT(10))
#define TIMG_T0_ALARM_EN_M (BIT(10))
#define TIMG_T0_ALARM_EN_V 0x1
#define TIMG_T0_ALARM_EN_S 10
#define TIMG_T0LO_REG(i) (REG_TIMG_BASE(i) + 0x0004)
/* TIMG_T0_LO : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Register to store timer 0 time-base counter current value lower 32 bits.*/
#define TIMG_T0_LO 0xFFFFFFFF
#define TIMG_T0_LO_M ((TIMG_T0_LO_V)<<(TIMG_T0_LO_S))
#define TIMG_T0_LO_V 0xFFFFFFFF
#define TIMG_T0_LO_S 0
#define TIMG_T0HI_REG(i) (REG_TIMG_BASE(i) + 0x0008)
/* TIMG_T0_HI : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Register to store timer 0 time-base counter current value higher 32 bits.*/
#define TIMG_T0_HI 0xFFFFFFFF
#define TIMG_T0_HI_M ((TIMG_T0_HI_V)<<(TIMG_T0_HI_S))
#define TIMG_T0_HI_V 0xFFFFFFFF
#define TIMG_T0_HI_S 0
#define TIMG_T0UPDATE_REG(i) (REG_TIMG_BASE(i) + 0x000c)
/* TIMG_T0_UPDATE : WO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Write any value will trigger a timer 0 time-base counter value
update (timer 0 current value will be stored in registers above)*/
#define TIMG_T0_UPDATE 0xFFFFFFFF
#define TIMG_T0_UPDATE_M ((TIMG_T0_UPDATE_V)<<(TIMG_T0_UPDATE_S))
#define TIMG_T0_UPDATE_V 0xFFFFFFFF
#define TIMG_T0_UPDATE_S 0
#define TIMG_T0ALARMLO_REG(i) (REG_TIMG_BASE(i) + 0x0010)
/* TIMG_T0_ALARM_LO : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Timer 0 time-base counter value lower 32 bits that will trigger the alarm*/
#define TIMG_T0_ALARM_LO 0xFFFFFFFF
#define TIMG_T0_ALARM_LO_M ((TIMG_T0_ALARM_LO_V)<<(TIMG_T0_ALARM_LO_S))
#define TIMG_T0_ALARM_LO_V 0xFFFFFFFF
#define TIMG_T0_ALARM_LO_S 0
#define TIMG_T0ALARMHI_REG(i) (REG_TIMG_BASE(i) + 0x0014)
/* TIMG_T0_ALARM_HI : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Timer 0 time-base counter value higher 32 bits that will trigger the alarm*/
#define TIMG_T0_ALARM_HI 0xFFFFFFFF
#define TIMG_T0_ALARM_HI_M ((TIMG_T0_ALARM_HI_V)<<(TIMG_T0_ALARM_HI_S))
#define TIMG_T0_ALARM_HI_V 0xFFFFFFFF
#define TIMG_T0_ALARM_HI_S 0
#define TIMG_T0LOADLO_REG(i) (REG_TIMG_BASE(i) + 0x0018)
/* TIMG_T0_LOAD_LO : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Lower 32 bits of the value that will load into timer 0 time-base counter*/
#define TIMG_T0_LOAD_LO 0xFFFFFFFF
#define TIMG_T0_LOAD_LO_M ((TIMG_T0_LOAD_LO_V)<<(TIMG_T0_LOAD_LO_S))
#define TIMG_T0_LOAD_LO_V 0xFFFFFFFF
#define TIMG_T0_LOAD_LO_S 0
#define TIMG_T0LOADHI_REG(i) (REG_TIMG_BASE(i) + 0x001c)
/* TIMG_T0_LOAD_HI : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: higher 32 bits of the value that will load into timer 0 time-base counter*/
#define TIMG_T0_LOAD_HI 0xFFFFFFFF
#define TIMG_T0_LOAD_HI_M ((TIMG_T0_LOAD_HI_V)<<(TIMG_T0_LOAD_HI_S))
#define TIMG_T0_LOAD_HI_V 0xFFFFFFFF
#define TIMG_T0_LOAD_HI_S 0
#define TIMG_T0LOAD_REG(i) (REG_TIMG_BASE(i) + 0x0020)
/* TIMG_T0_LOAD : WO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Write any value will trigger timer 0 time-base counter reload*/
#define TIMG_T0_LOAD 0xFFFFFFFF
#define TIMG_T0_LOAD_M ((TIMG_T0_LOAD_V)<<(TIMG_T0_LOAD_S))
#define TIMG_T0_LOAD_V 0xFFFFFFFF
#define TIMG_T0_LOAD_S 0
#define TIMG_T1CONFIG_REG(i) (REG_TIMG_BASE(i) + 0x0024)
/* TIMG_T1_EN : R/W ;bitpos:[31] ;default: 1'h0 ; */
/*description: When set timer 1 time-base counter is enabled*/
#define TIMG_T1_EN (BIT(31))
#define TIMG_T1_EN_M (BIT(31))
#define TIMG_T1_EN_V 0x1
#define TIMG_T1_EN_S 31
/* TIMG_T1_INCREASE : R/W ;bitpos:[30] ;default: 1'h1 ; */
/*description: When set timer 1 time-base counter increment. When cleared timer
1 time-base counter decrement.*/
#define TIMG_T1_INCREASE (BIT(30))
#define TIMG_T1_INCREASE_M (BIT(30))
#define TIMG_T1_INCREASE_V 0x1
#define TIMG_T1_INCREASE_S 30
/* TIMG_T1_AUTORELOAD : R/W ;bitpos:[29] ;default: 1'h1 ; */
/*description: When set timer 1 auto-reload at alarming is enabled*/
#define TIMG_T1_AUTORELOAD (BIT(29))
#define TIMG_T1_AUTORELOAD_M (BIT(29))
#define TIMG_T1_AUTORELOAD_V 0x1
#define TIMG_T1_AUTORELOAD_S 29
/* TIMG_T1_DIVIDER : R/W ;bitpos:[28:13] ;default: 16'h1 ; */
/*description: Timer 1 clock (T1_clk) prescale value.*/
#define TIMG_T1_DIVIDER 0x0000FFFF
#define TIMG_T1_DIVIDER_M ((TIMG_T1_DIVIDER_V)<<(TIMG_T1_DIVIDER_S))
#define TIMG_T1_DIVIDER_V 0xFFFF
#define TIMG_T1_DIVIDER_S 13
/* TIMG_T1_EDGE_INT_EN : R/W ;bitpos:[12] ;default: 1'h0 ; */
/*description: When set edge type interrupt will be generated during alarm*/
#define TIMG_T1_EDGE_INT_EN (BIT(12))
#define TIMG_T1_EDGE_INT_EN_M (BIT(12))
#define TIMG_T1_EDGE_INT_EN_V 0x1
#define TIMG_T1_EDGE_INT_EN_S 12
/* TIMG_T1_LEVEL_INT_EN : R/W ;bitpos:[11] ;default: 1'h0 ; */
/*description: When set level type interrupt will be generated during alarm*/
#define TIMG_T1_LEVEL_INT_EN (BIT(11))
#define TIMG_T1_LEVEL_INT_EN_M (BIT(11))
#define TIMG_T1_LEVEL_INT_EN_V 0x1
#define TIMG_T1_LEVEL_INT_EN_S 11
/* TIMG_T1_ALARM_EN : R/W ;bitpos:[10] ;default: 1'h0 ; */
/*description: When set alarm is enabled*/
#define TIMG_T1_ALARM_EN (BIT(10))
#define TIMG_T1_ALARM_EN_M (BIT(10))
#define TIMG_T1_ALARM_EN_V 0x1
#define TIMG_T1_ALARM_EN_S 10
#define TIMG_T1LO_REG(i) (REG_TIMG_BASE(i) + 0x0028)
/* TIMG_T1_LO : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Register to store timer 1 time-base counter current value lower 32 bits.*/
#define TIMG_T1_LO 0xFFFFFFFF
#define TIMG_T1_LO_M ((TIMG_T1_LO_V)<<(TIMG_T1_LO_S))
#define TIMG_T1_LO_V 0xFFFFFFFF
#define TIMG_T1_LO_S 0
#define TIMG_T1HI_REG(i) (REG_TIMG_BASE(i) + 0x002c)
/* TIMG_T1_HI : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Register to store timer 1 time-base counter current value higher 32 bits.*/
#define TIMG_T1_HI 0xFFFFFFFF
#define TIMG_T1_HI_M ((TIMG_T1_HI_V)<<(TIMG_T1_HI_S))
#define TIMG_T1_HI_V 0xFFFFFFFF
#define TIMG_T1_HI_S 0
#define TIMG_T1UPDATE_REG(i) (REG_TIMG_BASE(i) + 0x0030)
/* TIMG_T1_UPDATE : WO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Write any value will trigger a timer 1 time-base counter value
update (timer 1 current value will be stored in registers above)*/
#define TIMG_T1_UPDATE 0xFFFFFFFF
#define TIMG_T1_UPDATE_M ((TIMG_T1_UPDATE_V)<<(TIMG_T1_UPDATE_S))
#define TIMG_T1_UPDATE_V 0xFFFFFFFF
#define TIMG_T1_UPDATE_S 0
#define TIMG_T1ALARMLO_REG(i) (REG_TIMG_BASE(i) + 0x0034)
/* TIMG_T1_ALARM_LO : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Timer 1 time-base counter value lower 32 bits that will trigger the alarm*/
#define TIMG_T1_ALARM_LO 0xFFFFFFFF
#define TIMG_T1_ALARM_LO_M ((TIMG_T1_ALARM_LO_V)<<(TIMG_T1_ALARM_LO_S))
#define TIMG_T1_ALARM_LO_V 0xFFFFFFFF
#define TIMG_T1_ALARM_LO_S 0
#define TIMG_T1ALARMHI_REG(i) (REG_TIMG_BASE(i) + 0x0038)
/* TIMG_T1_ALARM_HI : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Timer 1 time-base counter value higher 32 bits that will trigger the alarm*/
#define TIMG_T1_ALARM_HI 0xFFFFFFFF
#define TIMG_T1_ALARM_HI_M ((TIMG_T1_ALARM_HI_V)<<(TIMG_T1_ALARM_HI_S))
#define TIMG_T1_ALARM_HI_V 0xFFFFFFFF
#define TIMG_T1_ALARM_HI_S 0
#define TIMG_T1LOADLO_REG(i) (REG_TIMG_BASE(i) + 0x003c)
/* TIMG_T1_LOAD_LO : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Lower 32 bits of the value that will load into timer 1 time-base counter*/
#define TIMG_T1_LOAD_LO 0xFFFFFFFF
#define TIMG_T1_LOAD_LO_M ((TIMG_T1_LOAD_LO_V)<<(TIMG_T1_LOAD_LO_S))
#define TIMG_T1_LOAD_LO_V 0xFFFFFFFF
#define TIMG_T1_LOAD_LO_S 0
#define TIMG_T1LOADHI_REG(i) (REG_TIMG_BASE(i) + 0x0040)
/* TIMG_T1_LOAD_HI : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: higher 32 bits of the value that will load into timer 1 time-base counter*/
#define TIMG_T1_LOAD_HI 0xFFFFFFFF
#define TIMG_T1_LOAD_HI_M ((TIMG_T1_LOAD_HI_V)<<(TIMG_T1_LOAD_HI_S))
#define TIMG_T1_LOAD_HI_V 0xFFFFFFFF
#define TIMG_T1_LOAD_HI_S 0
#define TIMG_T1LOAD_REG(i) (REG_TIMG_BASE(i) + 0x0044)
/* TIMG_T1_LOAD : WO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Write any value will trigger timer 1 time-base counter reload*/
#define TIMG_T1_LOAD 0xFFFFFFFF
#define TIMG_T1_LOAD_M ((TIMG_T1_LOAD_V)<<(TIMG_T1_LOAD_S))
#define TIMG_T1_LOAD_V 0xFFFFFFFF
#define TIMG_T1_LOAD_S 0
#define TIMG_WDTCONFIG0_REG(i) (REG_TIMG_BASE(i) + 0x0048)
/* TIMG_WDT_EN : R/W ;bitpos:[31] ;default: 1'h0 ; */
/*description: When set SWDT is enabled*/
#define TIMG_WDT_EN (BIT(31))
#define TIMG_WDT_EN_M (BIT(31))
#define TIMG_WDT_EN_V 0x1
#define TIMG_WDT_EN_S 31
/* TIMG_WDT_STG0 : R/W ;bitpos:[30:29] ;default: 1'd0 ; */
/*description: Stage 0 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system*/
#define TIMG_WDT_STG0 0x00000003
#define TIMG_WDT_STG0_M ((TIMG_WDT_STG0_V)<<(TIMG_WDT_STG0_S))
#define TIMG_WDT_STG0_V 0x3
#define TIMG_WDT_STG0_S 29
/* TIMG_WDT_STG1 : R/W ;bitpos:[28:27] ;default: 1'd0 ; */
/*description: Stage 1 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system*/
#define TIMG_WDT_STG1 0x00000003
#define TIMG_WDT_STG1_M ((TIMG_WDT_STG1_V)<<(TIMG_WDT_STG1_S))
#define TIMG_WDT_STG1_V 0x3
#define TIMG_WDT_STG1_S 27
/* TIMG_WDT_STG2 : R/W ;bitpos:[26:25] ;default: 1'd0 ; */
/*description: Stage 2 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system*/
#define TIMG_WDT_STG2 0x00000003
#define TIMG_WDT_STG2_M ((TIMG_WDT_STG2_V)<<(TIMG_WDT_STG2_S))
#define TIMG_WDT_STG2_V 0x3
#define TIMG_WDT_STG2_S 25
/* TIMG_WDT_STG3 : R/W ;bitpos:[24:23] ;default: 1'd0 ; */
/*description: Stage 3 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system*/
#define TIMG_WDT_STG3 0x00000003
#define TIMG_WDT_STG3_M ((TIMG_WDT_STG3_V)<<(TIMG_WDT_STG3_S))
#define TIMG_WDT_STG3_V 0x3
#define TIMG_WDT_STG3_S 23
/* TIMG_WDT_EDGE_INT_EN : R/W ;bitpos:[22] ;default: 1'h0 ; */
/*description: When set edge type interrupt generation is enabled*/
#define TIMG_WDT_EDGE_INT_EN (BIT(22))
#define TIMG_WDT_EDGE_INT_EN_M (BIT(22))
#define TIMG_WDT_EDGE_INT_EN_V 0x1
#define TIMG_WDT_EDGE_INT_EN_S 22
/* TIMG_WDT_LEVEL_INT_EN : R/W ;bitpos:[21] ;default: 1'h0 ; */
/*description: When set level type interrupt generation is enabled*/
#define TIMG_WDT_LEVEL_INT_EN (BIT(21))
#define TIMG_WDT_LEVEL_INT_EN_M (BIT(21))
#define TIMG_WDT_LEVEL_INT_EN_V 0x1
#define TIMG_WDT_LEVEL_INT_EN_S 21
/* TIMG_WDT_CPU_RESET_LENGTH : R/W ;bitpos:[20:18] ;default: 3'h1 ; */
/*description: length of CPU reset selection. 0: 100ns 1: 200ns 2: 300ns
3: 400ns 4: 500ns 5: 800ns 6: 1.6us 7: 3.2us*/
#define TIMG_WDT_CPU_RESET_LENGTH 0x00000007
#define TIMG_WDT_CPU_RESET_LENGTH_M ((TIMG_WDT_CPU_RESET_LENGTH_V)<<(TIMG_WDT_CPU_RESET_LENGTH_S))
#define TIMG_WDT_CPU_RESET_LENGTH_V 0x7
#define TIMG_WDT_CPU_RESET_LENGTH_S 18
/* TIMG_WDT_SYS_RESET_LENGTH : R/W ;bitpos:[17:15] ;default: 3'h1 ; */
/*description: length of system reset selection. 0: 100ns 1: 200ns 2: 300ns
3: 400ns 4: 500ns 5: 800ns 6: 1.6us 7: 3.2us*/
#define TIMG_WDT_SYS_RESET_LENGTH 0x00000007
#define TIMG_WDT_SYS_RESET_LENGTH_M ((TIMG_WDT_SYS_RESET_LENGTH_V)<<(TIMG_WDT_SYS_RESET_LENGTH_S))
#define TIMG_WDT_SYS_RESET_LENGTH_V 0x7
#define TIMG_WDT_SYS_RESET_LENGTH_S 15
/* TIMG_WDT_FLASHBOOT_MOD_EN : R/W ;bitpos:[14] ;default: 1'h1 ; */
/*description: When set flash boot protection is enabled*/
#define TIMG_WDT_FLASHBOOT_MOD_EN (BIT(14))
#define TIMG_WDT_FLASHBOOT_MOD_EN_M (BIT(14))
#define TIMG_WDT_FLASHBOOT_MOD_EN_V 0x1
#define TIMG_WDT_FLASHBOOT_MOD_EN_S 14
#define TIMG_WDTCONFIG1_REG(i) (REG_TIMG_BASE(i) + 0x004c)
/* TIMG_WDT_CLK_PRESCALE : R/W ;bitpos:[31:16] ;default: 16'h1 ; */
/*description: SWDT clock prescale value. Period = 12.5ns * value stored in this register*/
#define TIMG_WDT_CLK_PRESCALE 0x0000FFFF
#define TIMG_WDT_CLK_PRESCALE_M ((TIMG_WDT_CLK_PRESCALE_V)<<(TIMG_WDT_CLK_PRESCALE_S))
#define TIMG_WDT_CLK_PRESCALE_V 0xFFFF
#define TIMG_WDT_CLK_PRESCALE_S 16
#define TIMG_WDTCONFIG2_REG(i) (REG_TIMG_BASE(i) + 0x0050)
/* TIMG_WDT_STG0_HOLD : R/W ;bitpos:[31:0] ;default: 32'd26000000 ; */
/*description: Stage 0 timeout value in SWDT clock cycles*/
#define TIMG_WDT_STG0_HOLD 0xFFFFFFFF
#define TIMG_WDT_STG0_HOLD_M ((TIMG_WDT_STG0_HOLD_V)<<(TIMG_WDT_STG0_HOLD_S))
#define TIMG_WDT_STG0_HOLD_V 0xFFFFFFFF
#define TIMG_WDT_STG0_HOLD_S 0
#define TIMG_WDTCONFIG3_REG(i) (REG_TIMG_BASE(i) + 0x0054)
/* TIMG_WDT_STG1_HOLD : R/W ;bitpos:[31:0] ;default: 32'h7ffffff ; */
/*description: Stage 1 timeout value in SWDT clock cycles*/
#define TIMG_WDT_STG1_HOLD 0xFFFFFFFF
#define TIMG_WDT_STG1_HOLD_M ((TIMG_WDT_STG1_HOLD_V)<<(TIMG_WDT_STG1_HOLD_S))
#define TIMG_WDT_STG1_HOLD_V 0xFFFFFFFF
#define TIMG_WDT_STG1_HOLD_S 0
#define TIMG_WDTCONFIG4_REG(i) (REG_TIMG_BASE(i) + 0x0058)
/* TIMG_WDT_STG2_HOLD : R/W ;bitpos:[31:0] ;default: 32'hfffff ; */
/*description: Stage 2 timeout value in SWDT clock cycles*/
#define TIMG_WDT_STG2_HOLD 0xFFFFFFFF
#define TIMG_WDT_STG2_HOLD_M ((TIMG_WDT_STG2_HOLD_V)<<(TIMG_WDT_STG2_HOLD_S))
#define TIMG_WDT_STG2_HOLD_V 0xFFFFFFFF
#define TIMG_WDT_STG2_HOLD_S 0
#define TIMG_WDTCONFIG5_REG(i) (REG_TIMG_BASE(i) + 0x005c)
/* TIMG_WDT_STG3_HOLD : R/W ;bitpos:[31:0] ;default: 32'hfffff ; */
/*description: Stage 3 timeout value in SWDT clock cycles*/
#define TIMG_WDT_STG3_HOLD 0xFFFFFFFF
#define TIMG_WDT_STG3_HOLD_M ((TIMG_WDT_STG3_HOLD_V)<<(TIMG_WDT_STG3_HOLD_S))
#define TIMG_WDT_STG3_HOLD_V 0xFFFFFFFF
#define TIMG_WDT_STG3_HOLD_S 0
#define TIMG_WDTFEED_REG(i) (REG_TIMG_BASE(i) + 0x0060)
/* TIMG_WDT_FEED : WO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: Write any value will feed SWDT*/
#define TIMG_WDT_FEED 0xFFFFFFFF
#define TIMG_WDT_FEED_M ((TIMG_WDT_FEED_V)<<(TIMG_WDT_FEED_S))
#define TIMG_WDT_FEED_V 0xFFFFFFFF
#define TIMG_WDT_FEED_S 0
#define TIMG_WDTWPROTECT_REG(i) (REG_TIMG_BASE(i) + 0x0064)
/* TIMG_WDT_WKEY : R/W ;bitpos:[31:0] ;default: 32'h50d83aa1 ; */
/*description: If change its value from default then write protection is on.*/
#define TIMG_WDT_WKEY 0xFFFFFFFF
#define TIMG_WDT_WKEY_M ((TIMG_WDT_WKEY_V)<<(TIMG_WDT_WKEY_S))
#define TIMG_WDT_WKEY_V 0xFFFFFFFF
#define TIMG_WDT_WKEY_S 0
#define TIMG_RTCCALICFG_REG(i) (REG_TIMG_BASE(i) + 0x0068)
/* TIMG_RTC_CALI_START : R/W ;bitpos:[31] ;default: 1'h0 ; */
/*description: */
#define TIMG_RTC_CALI_START (BIT(31))
#define TIMG_RTC_CALI_START_M (BIT(31))
#define TIMG_RTC_CALI_START_V 0x1
#define TIMG_RTC_CALI_START_S 31
/* TIMG_RTC_CALI_MAX : R/W ;bitpos:[30:16] ;default: 15'h1 ; */
/*description: */
#define TIMG_RTC_CALI_MAX 0x00007FFF
#define TIMG_RTC_CALI_MAX_M ((TIMG_RTC_CALI_MAX_V)<<(TIMG_RTC_CALI_MAX_S))
#define TIMG_RTC_CALI_MAX_V 0x7FFF
#define TIMG_RTC_CALI_MAX_S 16
/* TIMG_RTC_CALI_RDY : RO ;bitpos:[15] ;default: 1'h0 ; */
/*description: */
#define TIMG_RTC_CALI_RDY (BIT(15))
#define TIMG_RTC_CALI_RDY_M (BIT(15))
#define TIMG_RTC_CALI_RDY_V 0x1
#define TIMG_RTC_CALI_RDY_S 15
/* TIMG_RTC_CALI_CLK_SEL : R/W ;bitpos:[14:13] ;default: 2'h1 ; */
/*description: */
#define TIMG_RTC_CALI_CLK_SEL 0x00000003
#define TIMG_RTC_CALI_CLK_SEL_M ((TIMG_RTC_CALI_CLK_SEL_V)<<(TIMG_RTC_CALI_CLK_SEL_S))
#define TIMG_RTC_CALI_CLK_SEL_V 0x3
#define TIMG_RTC_CALI_CLK_SEL_S 13
/* TIMG_RTC_CALI_START_CYCLING : R/W ;bitpos:[12] ;default: 1'd1 ; */
/*description: */
#define TIMG_RTC_CALI_START_CYCLING (BIT(12))
#define TIMG_RTC_CALI_START_CYCLING_M (BIT(12))
#define TIMG_RTC_CALI_START_CYCLING_V 0x1
#define TIMG_RTC_CALI_START_CYCLING_S 12
#define TIMG_RTCCALICFG1_REG(i) (REG_TIMG_BASE(i) + 0x006c)
/* TIMG_RTC_CALI_VALUE : RO ;bitpos:[31:7] ;default: 25'h0 ; */
/*description: */
#define TIMG_RTC_CALI_VALUE 0x01FFFFFF
#define TIMG_RTC_CALI_VALUE_M ((TIMG_RTC_CALI_VALUE_V)<<(TIMG_RTC_CALI_VALUE_S))
#define TIMG_RTC_CALI_VALUE_V 0x1FFFFFF
#define TIMG_RTC_CALI_VALUE_S 7
#define TIMG_LACTCONFIG_REG(i) (REG_TIMG_BASE(i) + 0x0070)
/* TIMG_LACT_EN : R/W ;bitpos:[31] ;default: 1'h0 ; */
/*description: */
#define TIMG_LACT_EN (BIT(31))
#define TIMG_LACT_EN_M (BIT(31))
#define TIMG_LACT_EN_V 0x1
#define TIMG_LACT_EN_S 31
/* TIMG_LACT_INCREASE : R/W ;bitpos:[30] ;default: 1'h1 ; */
/*description: */
#define TIMG_LACT_INCREASE (BIT(30))
#define TIMG_LACT_INCREASE_M (BIT(30))
#define TIMG_LACT_INCREASE_V 0x1
#define TIMG_LACT_INCREASE_S 30
/* TIMG_LACT_AUTORELOAD : R/W ;bitpos:[29] ;default: 1'h1 ; */
/*description: */
#define TIMG_LACT_AUTORELOAD (BIT(29))
#define TIMG_LACT_AUTORELOAD_M (BIT(29))
#define TIMG_LACT_AUTORELOAD_V 0x1
#define TIMG_LACT_AUTORELOAD_S 29
/* TIMG_LACT_DIVIDER : R/W ;bitpos:[28:13] ;default: 16'h1 ; */
/*description: */
#define TIMG_LACT_DIVIDER 0x0000FFFF
#define TIMG_LACT_DIVIDER_M ((TIMG_LACT_DIVIDER_V)<<(TIMG_LACT_DIVIDER_S))
#define TIMG_LACT_DIVIDER_V 0xFFFF
#define TIMG_LACT_DIVIDER_S 13
/* TIMG_LACT_EDGE_INT_EN : R/W ;bitpos:[12] ;default: 1'h0 ; */
/*description: */
#define TIMG_LACT_EDGE_INT_EN (BIT(12))
#define TIMG_LACT_EDGE_INT_EN_M (BIT(12))
#define TIMG_LACT_EDGE_INT_EN_V 0x1
#define TIMG_LACT_EDGE_INT_EN_S 12
/* TIMG_LACT_LEVEL_INT_EN : R/W ;bitpos:[11] ;default: 1'h0 ; */
/*description: */
#define TIMG_LACT_LEVEL_INT_EN (BIT(11))
#define TIMG_LACT_LEVEL_INT_EN_M (BIT(11))
#define TIMG_LACT_LEVEL_INT_EN_V 0x1
#define TIMG_LACT_LEVEL_INT_EN_S 11
/* TIMG_LACT_ALARM_EN : R/W ;bitpos:[10] ;default: 1'h0 ; */
/*description: */
#define TIMG_LACT_ALARM_EN (BIT(10))
#define TIMG_LACT_ALARM_EN_M (BIT(10))
#define TIMG_LACT_ALARM_EN_V 0x1
#define TIMG_LACT_ALARM_EN_S 10
/* TIMG_LACT_LAC_EN : R/W ;bitpos:[9] ;default: 1'h1 ; */
/*description: */
#define TIMG_LACT_LAC_EN (BIT(9))
#define TIMG_LACT_LAC_EN_M (BIT(9))
#define TIMG_LACT_LAC_EN_V 0x1
#define TIMG_LACT_LAC_EN_S 9
/* TIMG_LACT_CPST_EN : R/W ;bitpos:[8] ;default: 1'h1 ; */
/*description: */
#define TIMG_LACT_CPST_EN (BIT(8))
#define TIMG_LACT_CPST_EN_M (BIT(8))
#define TIMG_LACT_CPST_EN_V 0x1
#define TIMG_LACT_CPST_EN_S 8
/* TIMG_LACT_RTC_ONLY : R/W ;bitpos:[7] ;default: 1'h0 ; */
/*description: */
#define TIMG_LACT_RTC_ONLY (BIT(7))
#define TIMG_LACT_RTC_ONLY_M (BIT(7))
#define TIMG_LACT_RTC_ONLY_V 0x1
#define TIMG_LACT_RTC_ONLY_S 7
#define TIMG_LACTRTC_REG(i) (REG_TIMG_BASE(i) + 0x0074)
/* TIMG_LACT_RTC_STEP_LEN : R/W ;bitpos:[31:6] ;default: 26'h0 ; */
/*description: */
#define TIMG_LACT_RTC_STEP_LEN 0x03FFFFFF
#define TIMG_LACT_RTC_STEP_LEN_M ((TIMG_LACT_RTC_STEP_LEN_V)<<(TIMG_LACT_RTC_STEP_LEN_S))
#define TIMG_LACT_RTC_STEP_LEN_V 0x3FFFFFF
#define TIMG_LACT_RTC_STEP_LEN_S 6
#define TIMG_LACTLO_REG(i) (REG_TIMG_BASE(i) + 0x0078)
/* TIMG_LACT_LO : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define TIMG_LACT_LO 0xFFFFFFFF
#define TIMG_LACT_LO_M ((TIMG_LACT_LO_V)<<(TIMG_LACT_LO_S))
#define TIMG_LACT_LO_V 0xFFFFFFFF
#define TIMG_LACT_LO_S 0
#define TIMG_LACTHI_REG(i) (REG_TIMG_BASE(i) + 0x007c)
/* TIMG_LACT_HI : RO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define TIMG_LACT_HI 0xFFFFFFFF
#define TIMG_LACT_HI_M ((TIMG_LACT_HI_V)<<(TIMG_LACT_HI_S))
#define TIMG_LACT_HI_V 0xFFFFFFFF
#define TIMG_LACT_HI_S 0
#define TIMG_LACTUPDATE_REG(i) (REG_TIMG_BASE(i) + 0x0080)
/* TIMG_LACT_UPDATE : WO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define TIMG_LACT_UPDATE 0xFFFFFFFF
#define TIMG_LACT_UPDATE_M ((TIMG_LACT_UPDATE_V)<<(TIMG_LACT_UPDATE_S))
#define TIMG_LACT_UPDATE_V 0xFFFFFFFF
#define TIMG_LACT_UPDATE_S 0
#define TIMG_LACTALARMLO_REG(i) (REG_TIMG_BASE(i) + 0x0084)
/* TIMG_LACT_ALARM_LO : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define TIMG_LACT_ALARM_LO 0xFFFFFFFF
#define TIMG_LACT_ALARM_LO_M ((TIMG_LACT_ALARM_LO_V)<<(TIMG_LACT_ALARM_LO_S))
#define TIMG_LACT_ALARM_LO_V 0xFFFFFFFF
#define TIMG_LACT_ALARM_LO_S 0
#define TIMG_LACTALARMHI_REG(i) (REG_TIMG_BASE(i) + 0x0088)
/* TIMG_LACT_ALARM_HI : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define TIMG_LACT_ALARM_HI 0xFFFFFFFF
#define TIMG_LACT_ALARM_HI_M ((TIMG_LACT_ALARM_HI_V)<<(TIMG_LACT_ALARM_HI_S))
#define TIMG_LACT_ALARM_HI_V 0xFFFFFFFF
#define TIMG_LACT_ALARM_HI_S 0
#define TIMG_LACTLOADLO_REG(i) (REG_TIMG_BASE(i) + 0x008c)
/* TIMG_LACT_LOAD_LO : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define TIMG_LACT_LOAD_LO 0xFFFFFFFF
#define TIMG_LACT_LOAD_LO_M ((TIMG_LACT_LOAD_LO_V)<<(TIMG_LACT_LOAD_LO_S))
#define TIMG_LACT_LOAD_LO_V 0xFFFFFFFF
#define TIMG_LACT_LOAD_LO_S 0
#define TIMG_LACTLOADHI_REG(i) (REG_TIMG_BASE(i) + 0x0090)
/* TIMG_LACT_LOAD_HI : R/W ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define TIMG_LACT_LOAD_HI 0xFFFFFFFF
#define TIMG_LACT_LOAD_HI_M ((TIMG_LACT_LOAD_HI_V)<<(TIMG_LACT_LOAD_HI_S))
#define TIMG_LACT_LOAD_HI_V 0xFFFFFFFF
#define TIMG_LACT_LOAD_HI_S 0
#define TIMG_LACTLOAD_REG(i) (REG_TIMG_BASE(i) + 0x0094)
/* TIMG_LACT_LOAD : WO ;bitpos:[31:0] ;default: 32'h0 ; */
/*description: */
#define TIMG_LACT_LOAD 0xFFFFFFFF
#define TIMG_LACT_LOAD_M ((TIMG_LACT_LOAD_V)<<(TIMG_LACT_LOAD_S))
#define TIMG_LACT_LOAD_V 0xFFFFFFFF
#define TIMG_LACT_LOAD_S 0
#define TIMG_INT_ENA_TIMERS_REG(i) (REG_TIMG_BASE(i) + 0x0098)
/* TIMG_LACT_INT_ENA : R/W ;bitpos:[3] ;default: 1'h0 ; */
/*description: */
#define TIMG_LACT_INT_ENA (BIT(3))
#define TIMG_LACT_INT_ENA_M (BIT(3))
#define TIMG_LACT_INT_ENA_V 0x1
#define TIMG_LACT_INT_ENA_S 3
/* TIMG_WDT_INT_ENA : R/W ;bitpos:[2] ;default: 1'h0 ; */
/*description: Interrupt when an interrupt stage timeout*/
#define TIMG_WDT_INT_ENA (BIT(2))
#define TIMG_WDT_INT_ENA_M (BIT(2))
#define TIMG_WDT_INT_ENA_V 0x1
#define TIMG_WDT_INT_ENA_S 2
/* TIMG_T1_INT_ENA : R/W ;bitpos:[1] ;default: 1'h0 ; */
/*description: interrupt when timer1 alarm*/
#define TIMG_T1_INT_ENA (BIT(1))
#define TIMG_T1_INT_ENA_M (BIT(1))
#define TIMG_T1_INT_ENA_V 0x1
#define TIMG_T1_INT_ENA_S 1
/* TIMG_T0_INT_ENA : R/W ;bitpos:[0] ;default: 1'h0 ; */
/*description: interrupt when timer0 alarm*/
#define TIMG_T0_INT_ENA (BIT(0))
#define TIMG_T0_INT_ENA_M (BIT(0))
#define TIMG_T0_INT_ENA_V 0x1
#define TIMG_T0_INT_ENA_S 0
#define TIMG_INT_RAW_TIMERS_REG(i) (REG_TIMG_BASE(i) + 0x009c)
/* TIMG_LACT_INT_RAW : RO ;bitpos:[3] ;default: 1'h0 ; */
/*description: */
#define TIMG_LACT_INT_RAW (BIT(3))
#define TIMG_LACT_INT_RAW_M (BIT(3))
#define TIMG_LACT_INT_RAW_V 0x1
#define TIMG_LACT_INT_RAW_S 3
/* TIMG_WDT_INT_RAW : RO ;bitpos:[2] ;default: 1'h0 ; */
/*description: Interrupt when an interrupt stage timeout*/
#define TIMG_WDT_INT_RAW (BIT(2))
#define TIMG_WDT_INT_RAW_M (BIT(2))
#define TIMG_WDT_INT_RAW_V 0x1
#define TIMG_WDT_INT_RAW_S 2
/* TIMG_T1_INT_RAW : RO ;bitpos:[1] ;default: 1'h0 ; */
/*description: interrupt when timer1 alarm*/
#define TIMG_T1_INT_RAW (BIT(1))
#define TIMG_T1_INT_RAW_M (BIT(1))
#define TIMG_T1_INT_RAW_V 0x1
#define TIMG_T1_INT_RAW_S 1
/* TIMG_T0_INT_RAW : RO ;bitpos:[0] ;default: 1'h0 ; */
/*description: interrupt when timer0 alarm*/
#define TIMG_T0_INT_RAW (BIT(0))
#define TIMG_T0_INT_RAW_M (BIT(0))
#define TIMG_T0_INT_RAW_V 0x1
#define TIMG_T0_INT_RAW_S 0
#define TIMG_INT_ST_TIMERS_REG(i) (REG_TIMG_BASE(i) + 0x00a0)
/* TIMG_LACT_INT_ST : RO ;bitpos:[3] ;default: 1'h0 ; */
/*description: */
#define TIMG_LACT_INT_ST (BIT(3))
#define TIMG_LACT_INT_ST_M (BIT(3))
#define TIMG_LACT_INT_ST_V 0x1
#define TIMG_LACT_INT_ST_S 3
/* TIMG_WDT_INT_ST : RO ;bitpos:[2] ;default: 1'h0 ; */
/*description: Interrupt when an interrupt stage timeout*/
#define TIMG_WDT_INT_ST (BIT(2))
#define TIMG_WDT_INT_ST_M (BIT(2))
#define TIMG_WDT_INT_ST_V 0x1
#define TIMG_WDT_INT_ST_S 2
/* TIMG_T1_INT_ST : RO ;bitpos:[1] ;default: 1'h0 ; */
/*description: interrupt when timer1 alarm*/
#define TIMG_T1_INT_ST (BIT(1))
#define TIMG_T1_INT_ST_M (BIT(1))
#define TIMG_T1_INT_ST_V 0x1
#define TIMG_T1_INT_ST_S 1
/* TIMG_T0_INT_ST : RO ;bitpos:[0] ;default: 1'h0 ; */
/*description: interrupt when timer0 alarm*/
#define TIMG_T0_INT_ST (BIT(0))
#define TIMG_T0_INT_ST_M (BIT(0))
#define TIMG_T0_INT_ST_V 0x1
#define TIMG_T0_INT_ST_S 0
#define TIMG_INT_CLR_TIMERS_REG(i) (REG_TIMG_BASE(i) + 0x00a4)
/* TIMG_LACT_INT_CLR : WO ;bitpos:[3] ;default: 1'h0 ; */
/*description: */
#define TIMG_LACT_INT_CLR (BIT(3))
#define TIMG_LACT_INT_CLR_M (BIT(3))
#define TIMG_LACT_INT_CLR_V 0x1
#define TIMG_LACT_INT_CLR_S 3
/* TIMG_WDT_INT_CLR : WO ;bitpos:[2] ;default: 1'h0 ; */
/*description: Interrupt when an interrupt stage timeout*/
#define TIMG_WDT_INT_CLR (BIT(2))
#define TIMG_WDT_INT_CLR_M (BIT(2))
#define TIMG_WDT_INT_CLR_V 0x1
#define TIMG_WDT_INT_CLR_S 2
/* TIMG_T1_INT_CLR : WO ;bitpos:[1] ;default: 1'h0 ; */
/*description: interrupt when timer1 alarm*/
#define TIMG_T1_INT_CLR (BIT(1))
#define TIMG_T1_INT_CLR_M (BIT(1))
#define TIMG_T1_INT_CLR_V 0x1
#define TIMG_T1_INT_CLR_S 1
/* TIMG_T0_INT_CLR : WO ;bitpos:[0] ;default: 1'h0 ; */
/*description: interrupt when timer0 alarm*/
#define TIMG_T0_INT_CLR (BIT(0))
#define TIMG_T0_INT_CLR_M (BIT(0))
#define TIMG_T0_INT_CLR_V 0x1
#define TIMG_T0_INT_CLR_S 0
#define TIMG_NTIMERS_DATE_REG(i) (REG_TIMG_BASE(i) + 0x00f8)
/* TIMG_NTIMERS_DATE : R/W ;bitpos:[27:0] ;default: 28'h1604290 ; */
/*description: Version of this regfile*/
#define TIMG_NTIMERS_DATE 0x0FFFFFFF
#define TIMG_NTIMERS_DATE_M ((TIMG_NTIMERS_DATE_V)<<(TIMG_NTIMERS_DATE_S))
#define TIMG_NTIMERS_DATE_V 0xFFFFFFF
#define TIMG_NTIMERS_DATE_S 0
#define TIMGCLK_REG(i) (REG_TIMG_BASE(i) + 0x00fc)
/* TIMG_CLK_EN : R/W ;bitpos:[31] ;default: 1'h0 ; */
/*description: Force clock enable for this regfile*/
#define TIMG_CLK_EN (BIT(31))
#define TIMG_CLK_EN_M (BIT(31))
#define TIMG_CLK_EN_V 0x1
#define TIMG_CLK_EN_S 31
#endif /*__TIMG_REG_H__ */

207
tools/sdk/esp32/include/soc/soc/esp32/include/soc/timer_group_struct.h Normal file
View File

@ -0,0 +1,207 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_TIMG_STRUCT_H_
#define _SOC_TIMG_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct timg_dev_s {
struct{
union {
struct {
uint32_t reserved0: 10;
uint32_t alarm_en: 1; /*When set alarm is enabled*/
uint32_t level_int_en: 1; /*When set level type interrupt will be generated during alarm*/
uint32_t edge_int_en: 1; /*When set edge type interrupt will be generated during alarm*/
uint32_t divider: 16; /*Timer clock (T0/1_clk) pre-scale value.*/
uint32_t autoreload: 1; /*When set timer 0/1 auto-reload at alarming is enabled*/
uint32_t increase: 1; /*When set timer 0/1 time-base counter increment. When cleared timer 0 time-base counter decrement.*/
uint32_t enable: 1; /*When set timer 0/1 time-base counter is enabled*/
};
uint32_t val;
} config;
uint32_t cnt_low; /*Register to store timer 0/1 time-base counter current value lower 32 bits.*/
uint32_t cnt_high; /*Register to store timer 0 time-base counter current value higher 32 bits.*/
uint32_t update; /*Write any value will trigger a timer 0 time-base counter value update (timer 0 current value will be stored in registers above)*/
uint32_t alarm_low; /*Timer 0 time-base counter value lower 32 bits that will trigger the alarm*/
uint32_t alarm_high; /*Timer 0 time-base counter value higher 32 bits that will trigger the alarm*/
uint32_t load_low; /*Lower 32 bits of the value that will load into timer 0 time-base counter*/
uint32_t load_high; /*higher 32 bits of the value that will load into timer 0 time-base counter*/
uint32_t reload; /*Write any value will trigger timer 0 time-base counter reload*/
} hw_timer[2];
union {
struct {
uint32_t reserved0: 14;
uint32_t flashboot_mod_en: 1; /*When set flash boot protection is enabled*/
uint32_t sys_reset_length: 3; /*length of system reset selection. 0: 100ns 1: 200ns 2: 300ns 3: 400ns 4: 500ns 5: 800ns 6: 1.6us 7: 3.2us*/
uint32_t cpu_reset_length: 3; /*length of CPU reset selection. 0: 100ns 1: 200ns 2: 300ns 3: 400ns 4: 500ns 5: 800ns 6: 1.6us 7: 3.2us*/
uint32_t level_int_en: 1; /*When set level type interrupt generation is enabled*/
uint32_t edge_int_en: 1; /*When set edge type interrupt generation is enabled*/
uint32_t stg3: 2; /*Stage 3 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system*/
uint32_t stg2: 2; /*Stage 2 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system*/
uint32_t stg1: 2; /*Stage 1 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system*/
uint32_t stg0: 2; /*Stage 0 configuration. 0: off 1: interrupt 2: reset CPU 3: reset system*/
uint32_t en: 1; /*When set SWDT is enabled*/
};
uint32_t val;
} wdt_config0;
union {
struct {
uint32_t reserved0: 16;
uint32_t clk_prescale:16; /*SWDT clock prescale value. Period = 12.5ns * value stored in this register*/
};
uint32_t val;
} wdt_config1;
uint32_t wdt_config2; /*Stage 0 timeout value in SWDT clock cycles*/
uint32_t wdt_config3; /*Stage 1 timeout value in SWDT clock cycles*/
uint32_t wdt_config4; /*Stage 2 timeout value in SWDT clock cycles*/
uint32_t wdt_config5; /*Stage 3 timeout value in SWDT clock cycles*/
uint32_t wdt_feed; /*Write any value will feed SWDT*/
uint32_t wdt_wprotect; /*If change its value from default then write protection is on.*/
union {
struct {
uint32_t reserved0: 12;
uint32_t start_cycling: 1;
uint32_t clk_sel: 2;
uint32_t rdy: 1;
uint32_t max: 15;
uint32_t start: 1;
};
uint32_t val;
} rtc_cali_cfg;
union {
struct {
uint32_t reserved0: 7;
uint32_t value:25;
};
uint32_t val;
} rtc_cali_cfg1;
union {
struct {
uint32_t reserved0: 7;
uint32_t rtc_only: 1;
uint32_t cpst_en: 1;
uint32_t lac_en: 1;
uint32_t alarm_en: 1;
uint32_t level_int_en: 1;
uint32_t edge_int_en: 1;
uint32_t divider: 16;
uint32_t autoreload: 1;
uint32_t increase: 1;
uint32_t en: 1;
};
uint32_t val;
} lactconfig;
union {
struct {
uint32_t reserved0: 6;
uint32_t step_len:26;
};
uint32_t val;
} lactrtc;
uint32_t lactlo; /**/
uint32_t lacthi; /**/
uint32_t lactupdate; /**/
uint32_t lactalarmlo; /**/
uint32_t lactalarmhi; /**/
uint32_t lactloadlo; /**/
uint32_t lactloadhi; /**/
uint32_t lactload; /**/
union {
struct {
uint32_t t0: 1; /*interrupt when timer0 alarm*/
uint32_t t1: 1; /*interrupt when timer1 alarm*/
uint32_t wdt: 1; /*Interrupt when an interrupt stage timeout*/
uint32_t lact: 1;
uint32_t reserved4: 28;
};
uint32_t val;
} int_ena;
union {
struct {
uint32_t t0: 1; /*interrupt when timer0 alarm*/
uint32_t t1: 1; /*interrupt when timer1 alarm*/
uint32_t wdt: 1; /*Interrupt when an interrupt stage timeout*/
uint32_t lact: 1;
uint32_t reserved4:28;
};
uint32_t val;
} int_raw;
union {
struct {
uint32_t t0: 1; /*interrupt when timer0 alarm*/
uint32_t t1: 1; /*interrupt when timer1 alarm*/
uint32_t wdt: 1; /*Interrupt when an interrupt stage timeout*/
uint32_t lact: 1;
uint32_t reserved4: 28;
};
uint32_t val;
} int_st_timers;
union {
struct {
uint32_t t0: 1; /*interrupt when timer0 alarm*/
uint32_t t1: 1; /*interrupt when timer1 alarm*/
uint32_t wdt: 1; /*Interrupt when an interrupt stage timeout*/
uint32_t lact: 1;
uint32_t reserved4: 28;
};
uint32_t val;
} int_clr_timers;
uint32_t reserved_a8;
uint32_t reserved_ac;
uint32_t reserved_b0;
uint32_t reserved_b4;
uint32_t reserved_b8;
uint32_t reserved_bc;
uint32_t reserved_c0;
uint32_t reserved_c4;
uint32_t reserved_c8;
uint32_t reserved_cc;
uint32_t reserved_d0;
uint32_t reserved_d4;
uint32_t reserved_d8;
uint32_t reserved_dc;
uint32_t reserved_e0;
uint32_t reserved_e4;
uint32_t reserved_e8;
uint32_t reserved_ec;
uint32_t reserved_f0;
uint32_t reserved_f4;
union {
struct {
uint32_t date:28; /*Version of this regfile*/
uint32_t reserved28: 4;
};
uint32_t val;
} timg_date;
union {
struct {
uint32_t reserved0: 31;
uint32_t en: 1; /*Force clock enable for this regfile*/
};
uint32_t val;
} clk;
} timg_dev_t;
extern timg_dev_t TIMERG0;
extern timg_dev_t TIMERG1;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_TIMG_STRUCT_H_ */

29
tools/sdk/esp32/include/soc/soc/esp32/include/soc/touch_sensor_caps.h Normal file
View File

@ -0,0 +1,29 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#define SOC_TOUCH_SENSOR_NUM (10)
#define SOC_TOUCH_SENSOR_BIT_MASK_MAX (0x3ff)
#define SOC_TOUCH_PAD_MEASURE_WAIT (0xFF) /*!<The timer frequency is 8Mhz, the max value is 0xff */
#define SOC_TOUCH_PAD_THRESHOLD_MAX (0) /*!<If set touch threshold max value, The touch sensor can't be in touched status */
#ifdef __cplusplus
}
#endif

49
tools/sdk/esp32/include/soc/soc/esp32/include/soc/touch_sensor_channel.h Normal file
View File

@ -0,0 +1,49 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_TOUCH_CHANNEL_H
#define _SOC_TOUCH_CHANNEL_H
//Touch channels
#define TOUCH_PAD_GPIO4_CHANNEL TOUCH_PAD_NUM0
#define TOUCH_PAD_NUM0_GPIO_NUM 4
#define TOUCH_PAD_GPIO0_CHANNEL TOUCH_PAD_NUM1
#define TOUCH_PAD_NUM1_GPIO_NUM 0
#define TOUCH_PAD_GPIO2_CHANNEL TOUCH_PAD_NUM2
#define TOUCH_PAD_NUM2_GPIO_NUM 2
#define TOUCH_PAD_GPIO15_CHANNEL TOUCH_PAD_NUM3
#define TOUCH_PAD_NUM3_GPIO_NUM 15
#define TOUCH_PAD_GPIO13_CHANNEL TOUCH_PAD_NUM4
#define TOUCH_PAD_NUM4_GPIO_NUM 13
#define TOUCH_PAD_GPIO12_CHANNEL TOUCH_PAD_NUM5
#define TOUCH_PAD_NUM5_GPIO_NUM 12
#define TOUCH_PAD_GPIO14_CHANNEL TOUCH_PAD_NUM6
#define TOUCH_PAD_NUM6_GPIO_NUM 14
#define TOUCH_PAD_GPIO27_CHANNEL TOUCH_PAD_NUM7
#define TOUCH_PAD_NUM7_GPIO_NUM 27
#define TOUCH_PAD_GPIO33_CHANNEL TOUCH_PAD_NUM8
#define TOUCH_PAD_NUM8_GPIO_NUM 33
#define TOUCH_PAD_GPIO32_CHANNEL TOUCH_PAD_NUM9
#define TOUCH_PAD_NUM9_GPIO_NUM 32
#endif

33
tools/sdk/esp32/include/soc/soc/esp32/include/soc/uart_caps.h Normal file
View File

@ -0,0 +1,33 @@
// Copyright 2010-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#define UART_FIFO_LEN (128) /*!< The UART hardware FIFO length */
#define UART_BITRATE_MAX (5000000) /*!< Max bit rate supported by UART */
// ESP32 have 3 UART.
#define SOC_UART_NUM (3)
#define SOC_UART_MIN_WAKEUP_THRESH (2)
#define UART_INTR_MASK (0x7ffff) //All interrupt mask
#ifdef __cplusplus
}
#endif

61
tools/sdk/esp32/include/soc/soc/esp32/include/soc/uart_channel.h Normal file
View File

@ -0,0 +1,61 @@
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_UART_CHANNEL_H
#define _SOC_UART_CHANNEL_H
//UART channels
#define UART_GPIO1_DIRECT_CHANNEL UART_NUM_0
#define UART_NUM_0_TXD_DIRECT_GPIO_NUM 1
#define UART_GPIO3_DIRECT_CHANNEL UART_NUM_0
#define UART_NUM_0_RXD_DIRECT_GPIO_NUM 3
#define UART_GPIO19_DIRECT_CHANNEL UART_NUM_0
#define UART_NUM_0_CTS_DIRECT_GPIO_NUM 19
#define UART_GPIO22_DIRECT_CHANNEL UART_NUM_0
#define UART_NUM_0_RTS_DIRECT_GPIO_NUM 22
#define UART_TXD_GPIO1_DIRECT_CHANNEL UART_GPIO1_DIRECT_CHANNEL
#define UART_RXD_GPIO3_DIRECT_CHANNEL UART_GPIO3_DIRECT_CHANNEL
#define UART_CTS_GPIO19_DIRECT_CHANNEL UART_GPIO19_DIRECT_CHANNEL
#define UART_RTS_GPIO22_DIRECT_CHANNEL UART_GPIO22_DIRECT_CHANNEL
#define UART_GPIO10_DIRECT_CHANNEL UART_NUM_1
#define UART_NUM_1_TXD_DIRECT_GPIO_NUM 10
#define UART_GPIO9_DIRECT_CHANNEL UART_NUM_1
#define UART_NUM_1_RXD_DIRECT_GPIO_NUM 9
#define UART_GPIO6_DIRECT_CHANNEL UART_NUM_1
#define UART_NUM_1_CTS_DIRECT_GPIO_NUM 6
#define UART_GPIO11_DIRECT_CHANNEL UART_NUM_1
#define UART_NUM_1_RTS_DIRECT_GPIO_NUM 11
#define UART_TXD_GPIO10_DIRECT_CHANNEL UART_GPIO10_DIRECT_CHANNEL
#define UART_RXD_GPIO9_DIRECT_CHANNEL UART_GPIO9_DIRECT_CHANNEL
#define UART_CTS_GPIO6_DIRECT_CHANNEL UART_GPIO6_DIRECT_CHANNEL
#define UART_RTS_GPIO11_DIRECT_CHANNEL UART_GPIO11_DIRECT_CHANNEL
#define UART_GPIO17_DIRECT_CHANNEL UART_NUM_2
#define UART_NUM_2_TXD_DIRECT_GPIO_NUM 17
#define UART_GPIO16_DIRECT_CHANNEL UART_NUM_2
#define UART_NUM_2_RXD_DIRECT_GPIO_NUM 16
#define UART_GPIO8_DIRECT_CHANNEL UART_NUM_2
#define UART_NUM_2_CTS_DIRECT_GPIO_NUM 8
#define UART_GPIO7_DIRECT_CHANNEL UART_NUM_2
#define UART_NUM_2_RTS_DIRECT_GPIO_NUM 7
#define UART_TXD_GPIO17_DIRECT_CHANNEL UART_GPIO17_DIRECT_CHANNEL
#define UART_RXD_GPIO16_DIRECT_CHANNEL UART_GPIO16_DIRECT_CHANNEL
#define UART_CTS_GPIO8_DIRECT_CHANNEL UART_GPIO8_DIRECT_CHANNEL
#define UART_RTS_GPIO7_DIRECT_CHANNEL UART_GPIO7_DIRECT_CHANNEL
#endif

1180
tools/sdk/esp32/include/soc/soc/esp32/include/soc/uart_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

383
tools/sdk/esp32/include/soc/soc/esp32/include/soc/uart_struct.h Normal file
View File

@ -0,0 +1,383 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_UART_STRUCT_H_
#define _SOC_UART_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct uart_dev_s {
union {
struct {
uint8_t rw_byte; /*This register stores one byte data read by rx fifo.*/
uint8_t reserved[3];
};
uint32_t val;
} fifo;
union {
struct {
uint32_t rxfifo_full: 1; /*This interrupt raw bit turns to high level when receiver receives more data than (rx_flow_thrhd_h3 rx_flow_thrhd).*/
uint32_t txfifo_empty: 1; /*This interrupt raw bit turns to high level when the amount of data in transmitter's fifo is less than ((tx_mem_cnttxfifo_cnt) .*/
uint32_t parity_err: 1; /*This interrupt raw bit turns to high level when receiver detects the parity error of data.*/
uint32_t frm_err: 1; /*This interrupt raw bit turns to high level when receiver detects data's frame error .*/
uint32_t rxfifo_ovf: 1; /*This interrupt raw bit turns to high level when receiver receives more data than the fifo can store.*/
uint32_t dsr_chg: 1; /*This interrupt raw bit turns to high level when receiver detects the edge change of dsrn signal.*/
uint32_t cts_chg: 1; /*This interrupt raw bit turns to high level when receiver detects the edge change of ctsn signal.*/
uint32_t brk_det: 1; /*This interrupt raw bit turns to high level when receiver detects the 0 after the stop bit.*/
uint32_t rxfifo_tout: 1; /*This interrupt raw bit turns to high level when receiver takes more time than rx_tout_thrhd to receive a byte.*/
uint32_t sw_xon: 1; /*This interrupt raw bit turns to high level when receiver receives xoff char with uart_sw_flow_con_en is set to 1.*/
uint32_t sw_xoff: 1; /*This interrupt raw bit turns to high level when receiver receives xon char with uart_sw_flow_con_en is set to 1.*/
uint32_t glitch_det: 1; /*This interrupt raw bit turns to high level when receiver detects the start bit.*/
uint32_t tx_brk_done: 1; /*This interrupt raw bit turns to high level when transmitter completes sending 0 after all the data in transmitter's fifo are send.*/
uint32_t tx_brk_idle_done: 1; /*This interrupt raw bit turns to high level when transmitter has kept the shortest duration after the last data has been send.*/
uint32_t tx_done: 1; /*This interrupt raw bit turns to high level when transmitter has send all the data in fifo.*/
uint32_t rs485_parity_err: 1; /*This interrupt raw bit turns to high level when rs485 detects the parity error.*/
uint32_t rs485_frm_err: 1; /*This interrupt raw bit turns to high level when rs485 detects the data frame error.*/
uint32_t rs485_clash: 1; /*This interrupt raw bit turns to high level when rs485 detects the clash between transmitter and receiver.*/
uint32_t at_cmd_char_det: 1; /*This interrupt raw bit turns to high level when receiver detects the configured at_cmd chars.*/
uint32_t reserved19: 13;
};
uint32_t val;
} int_raw;
union {
struct {
uint32_t rxfifo_full: 1; /*This is the status bit for rxfifo_full_int_raw when rxfifo_full_int_ena is set to 1.*/
uint32_t txfifo_empty: 1; /*This is the status bit for txfifo_empty_int_raw when txfifo_empty_int_ena is set to 1.*/
uint32_t parity_err: 1; /*This is the status bit for parity_err_int_raw when parity_err_int_ena is set to 1.*/
uint32_t frm_err: 1; /*This is the status bit for frm_err_int_raw when fm_err_int_ena is set to 1.*/
uint32_t rxfifo_ovf: 1; /*This is the status bit for rxfifo_ovf_int_raw when rxfifo_ovf_int_ena is set to 1.*/
uint32_t dsr_chg: 1; /*This is the status bit for dsr_chg_int_raw when dsr_chg_int_ena is set to 1.*/
uint32_t cts_chg: 1; /*This is the status bit for cts_chg_int_raw when cts_chg_int_ena is set to 1.*/
uint32_t brk_det: 1; /*This is the status bit for brk_det_int_raw when brk_det_int_ena is set to 1.*/
uint32_t rxfifo_tout: 1; /*This is the status bit for rxfifo_tout_int_raw when rxfifo_tout_int_ena is set to 1.*/
uint32_t sw_xon: 1; /*This is the status bit for sw_xon_int_raw when sw_xon_int_ena is set to 1.*/
uint32_t sw_xoff: 1; /*This is the status bit for sw_xoff_int_raw when sw_xoff_int_ena is set to 1.*/
uint32_t glitch_det: 1; /*This is the status bit for glitch_det_int_raw when glitch_det_int_ena is set to 1.*/
uint32_t tx_brk_done: 1; /*This is the status bit for tx_brk_done_int_raw when tx_brk_done_int_ena is set to 1.*/
uint32_t tx_brk_idle_done: 1; /*This is the status bit for tx_brk_idle_done_int_raw when tx_brk_idle_done_int_ena is set to 1.*/
uint32_t tx_done: 1; /*This is the status bit for tx_done_int_raw when tx_done_int_ena is set to 1.*/
uint32_t rs485_parity_err: 1; /*This is the status bit for rs485_parity_err_int_raw when rs485_parity_int_ena is set to 1.*/
uint32_t rs485_frm_err: 1; /*This is the status bit for rs485_fm_err_int_raw when rs485_fm_err_int_ena is set to 1.*/
uint32_t rs485_clash: 1; /*This is the status bit for rs485_clash_int_raw when rs485_clash_int_ena is set to 1.*/
uint32_t at_cmd_char_det: 1; /*This is the status bit for at_cmd_det_int_raw when at_cmd_char_det_int_ena is set to 1.*/
uint32_t reserved19: 13;
};
uint32_t val;
} int_st;
union {
struct {
uint32_t rxfifo_full: 1; /*This is the enable bit for rxfifo_full_int_st register.*/
uint32_t txfifo_empty: 1; /*This is the enable bit for rxfifo_full_int_st register.*/
uint32_t parity_err: 1; /*This is the enable bit for parity_err_int_st register.*/
uint32_t frm_err: 1; /*This is the enable bit for frm_err_int_st register.*/
uint32_t rxfifo_ovf: 1; /*This is the enable bit for rxfifo_ovf_int_st register.*/
uint32_t dsr_chg: 1; /*This is the enable bit for dsr_chg_int_st register.*/
uint32_t cts_chg: 1; /*This is the enable bit for cts_chg_int_st register.*/
uint32_t brk_det: 1; /*This is the enable bit for brk_det_int_st register.*/
uint32_t rxfifo_tout: 1; /*This is the enable bit for rxfifo_tout_int_st register.*/
uint32_t sw_xon: 1; /*This is the enable bit for sw_xon_int_st register.*/
uint32_t sw_xoff: 1; /*This is the enable bit for sw_xoff_int_st register.*/
uint32_t glitch_det: 1; /*This is the enable bit for glitch_det_int_st register.*/
uint32_t tx_brk_done: 1; /*This is the enable bit for tx_brk_done_int_st register.*/
uint32_t tx_brk_idle_done: 1; /*This is the enable bit for tx_brk_idle_done_int_st register.*/
uint32_t tx_done: 1; /*This is the enable bit for tx_done_int_st register.*/
uint32_t rs485_parity_err: 1; /*This is the enable bit for rs485_parity_err_int_st register.*/
uint32_t rs485_frm_err: 1; /*This is the enable bit for rs485_parity_err_int_st register.*/
uint32_t rs485_clash: 1; /*This is the enable bit for rs485_clash_int_st register.*/
uint32_t at_cmd_char_det: 1; /*This is the enable bit for at_cmd_char_det_int_st register.*/
uint32_t reserved19: 13;
};
uint32_t val;
} int_ena;
union {
struct {
uint32_t rxfifo_full: 1; /*Set this bit to clear the rxfifo_full_int_raw interrupt.*/
uint32_t txfifo_empty: 1; /*Set this bit to clear txfifo_empty_int_raw interrupt.*/
uint32_t parity_err: 1; /*Set this bit to clear parity_err_int_raw interrupt.*/
uint32_t frm_err: 1; /*Set this bit to clear frm_err_int_raw interrupt.*/
uint32_t rxfifo_ovf: 1; /*Set this bit to clear rxfifo_ovf_int_raw interrupt.*/
uint32_t dsr_chg: 1; /*Set this bit to clear the dsr_chg_int_raw interrupt.*/
uint32_t cts_chg: 1; /*Set this bit to clear the cts_chg_int_raw interrupt.*/
uint32_t brk_det: 1; /*Set this bit to clear the brk_det_int_raw interrupt.*/
uint32_t rxfifo_tout: 1; /*Set this bit to clear the rxfifo_tout_int_raw interrupt.*/
uint32_t sw_xon: 1; /*Set this bit to clear the sw_xon_int_raw interrupt.*/
uint32_t sw_xoff: 1; /*Set this bit to clear the sw_xon_int_raw interrupt.*/
uint32_t glitch_det: 1; /*Set this bit to clear the glitch_det_int_raw interrupt.*/
uint32_t tx_brk_done: 1; /*Set this bit to clear the tx_brk_done_int_raw interrupt..*/
uint32_t tx_brk_idle_done: 1; /*Set this bit to clear the tx_brk_idle_done_int_raw interrupt.*/
uint32_t tx_done: 1; /*Set this bit to clear the tx_done_int_raw interrupt.*/
uint32_t rs485_parity_err: 1; /*Set this bit to clear the rs485_parity_err_int_raw interrupt.*/
uint32_t rs485_frm_err: 1; /*Set this bit to clear the rs485_frm_err_int_raw interrupt.*/
uint32_t rs485_clash: 1; /*Set this bit to clear the rs485_clash_int_raw interrupt.*/
uint32_t at_cmd_char_det: 1; /*Set this bit to clear the at_cmd_char_det_int_raw interrupt.*/
uint32_t reserved19: 13;
};
uint32_t val;
} int_clr;
union {
struct {
uint32_t div_int: 20; /*The register value is the integer part of the frequency divider's factor.*/
uint32_t div_frag: 4; /*The register value is the decimal part of the frequency divider's factor.*/
uint32_t reserved24: 8;
};
uint32_t val;
} clk_div;
union {
struct {
uint32_t en: 1; /*This is the enable bit for detecting baudrate.*/
uint32_t reserved1: 7;
uint32_t glitch_filt: 8; /*when input pulse width is lower then this value ignore this pulse.this register is used in auto-baud detect process.*/
uint32_t reserved16: 16;
};
uint32_t val;
} auto_baud;
union {
struct {
uint32_t rxfifo_cnt: 8; /*(rx_mem_cnt rxfifo_cnt) stores the byte number of valid data in receiver's fifo. rx_mem_cnt register stores the 3 most significant bits rxfifo_cnt stores the 8 least significant bits.*/
uint32_t st_urx_out: 4; /*This register stores the value of receiver's finite state machine. 0:RX_IDLE 1:RX_STRT 2:RX_DAT0 3:RX_DAT1 4:RX_DAT2 5:RX_DAT3 6:RX_DAT4 7:RX_DAT5 8:RX_DAT6 9:RX_DAT7 10:RX_PRTY 11:RX_STP1 12:RX_STP2 13:RX_DL1*/
uint32_t reserved12: 1;
uint32_t dsrn: 1; /*This register stores the level value of the internal uart dsr signal.*/
uint32_t ctsn: 1; /*This register stores the level value of the internal uart cts signal.*/
uint32_t rxd: 1; /*This register stores the level value of the internal uart rxd signal.*/
uint32_t txfifo_cnt: 8; /*(tx_mem_cnt txfifo_cnt) stores the byte number of valid data in transmitter's fifo.tx_mem_cnt stores the 3 most significant bits txfifo_cnt stores the 8 least significant bits.*/
uint32_t st_utx_out: 4; /*This register stores the value of transmitter's finite state machine. 0:TX_IDLE 1:TX_STRT 2:TX_DAT0 3:TX_DAT1 4:TX_DAT2 5:TX_DAT3 6:TX_DAT4 7:TX_DAT5 8:TX_DAT6 9:TX_DAT7 10:TX_PRTY 11:TX_STP1 12:TX_STP2 13:TX_DL0 14:TX_DL1*/
uint32_t reserved28: 1;
uint32_t dtrn: 1; /*The register represent the level value of the internal uart dsr signal.*/
uint32_t rtsn: 1; /*This register represent the level value of the internal uart cts signal.*/
uint32_t txd: 1; /*This register represent the level value of the internal uart rxd signal.*/
};
uint32_t val;
} status;
union {
struct {
uint32_t parity: 1; /*This register is used to configure the parity check mode. 0:even 1:odd*/
uint32_t parity_en: 1; /*Set this bit to enable uart parity check.*/
uint32_t bit_num: 2; /*This register is used to set the length of data: 0:5bits 1:6bits 2:7bits 3:8bits*/
uint32_t stop_bit_num: 2; /*This register is used to set the length of stop bit. 1:1bit 2:1.5bits 3:2bits*/
uint32_t sw_rts: 1; /*This register is used to configure the software rts signal which is used in software flow control.*/
uint32_t sw_dtr: 1; /*This register is used to configure the software dtr signal which is used in software flow control..*/
uint32_t txd_brk: 1; /*Set this bit to enable transmitter to send 0 when the process of sending data is done.*/
uint32_t irda_dplx: 1; /*Set this bit to enable irda loop-back mode.*/
uint32_t irda_tx_en: 1; /*This is the start enable bit for irda transmitter.*/
uint32_t irda_wctl: 1; /*1：the irda transmitter's 11th bit is the same to the 10th bit. 0：set irda transmitter's 11th bit to 0.*/
uint32_t irda_tx_inv: 1; /*Set this bit to inverse the level value of irda transmitter's level.*/
uint32_t irda_rx_inv: 1; /*Set this bit to inverse the level value of irda receiver's level.*/
uint32_t loopback: 1; /*Set this bit to enable uart loop-back test mode.*/
uint32_t tx_flow_en: 1; /*Set this bit to enable transmitter's flow control function.*/
uint32_t irda_en: 1; /*Set this bit to enable irda protocol.*/
uint32_t rxfifo_rst: 1; /*Set this bit to reset uart receiver's fifo.*/
uint32_t txfifo_rst: 1; /*Set this bit to reset uart transmitter's fifo.*/
uint32_t rxd_inv: 1; /*Set this bit to inverse the level value of uart rxd signal.*/
uint32_t cts_inv: 1; /*Set this bit to inverse the level value of uart cts signal.*/
uint32_t dsr_inv: 1; /*Set this bit to inverse the level value of uart dsr signal.*/
uint32_t txd_inv: 1; /*Set this bit to inverse the level value of uart txd signal.*/
uint32_t rts_inv: 1; /*Set this bit to inverse the level value of uart rts signal.*/
uint32_t dtr_inv: 1; /*Set this bit to inverse the level value of uart dtr signal.*/
uint32_t clk_en: 1; /*1：force clock on for registers：support clock only when write registers*/
uint32_t err_wr_mask: 1; /*1：receiver stops storing data int fifo when data is wrong. 0：receiver stores the data even if the received data is wrong.*/
uint32_t tick_ref_always_on: 1; /*This register is used to select the clock.1：apb clock：ref_tick*/
uint32_t reserved28: 4;
};
uint32_t val;
} conf0;
union {
struct {
uint32_t rxfifo_full_thrhd: 7; /*When receiver receives more data than its threshold value，receiver will produce rxfifo_full_int_raw interrupt.the threshold value is (rx_flow_thrhd_h3 rxfifo_full_thrhd).*/
uint32_t reserved7: 1;
uint32_t txfifo_empty_thrhd: 7; /*when the data amount in transmitter fifo is less than its threshold value， it will produce txfifo_empty_int_raw interrupt. the threshold value is (tx_mem_empty_thrhd txfifo_empty_thrhd)*/
uint32_t reserved15: 1;
uint32_t rx_flow_thrhd: 7; /*when receiver receives more data than its threshold value， receiver produce signal to tell the transmitter stop transferring data. the threshold value is (rx_flow_thrhd_h3 rx_flow_thrhd).*/
uint32_t rx_flow_en: 1; /*This is the flow enable bit for uart receiver. 1:choose software flow control with configuring sw_rts signal*/
uint32_t rx_tout_thrhd: 7; /*This register is used to configure the timeout value for uart receiver receiving a byte.*/
uint32_t rx_tout_en: 1; /*This is the enable bit for uart receiver's timeout function.*/
};
uint32_t val;
} conf1;
union {
struct {
uint32_t min_cnt: 20; /*This register stores the value of the minimum duration time for the low level pulse， it is used in baudrate-detect process.*/
uint32_t reserved20: 12;
};
uint32_t val;
} lowpulse;
union {
struct {
uint32_t min_cnt: 20; /*This register stores the value of the maximum duration time for the high level pulse， it is used in baudrate-detect process.*/
uint32_t reserved20: 12;
};
uint32_t val;
} highpulse;
union {
struct {
uint32_t edge_cnt: 10; /*This register stores the count of rxd edge change， it is used in baudrate-detect process.*/
uint32_t reserved10: 22;
};
uint32_t val;
} rxd_cnt;
union {
struct {
uint32_t sw_flow_con_en: 1; /*Set this bit to enable software flow control. it is used with register sw_xon or sw_xoff .*/
uint32_t xonoff_del: 1; /*Set this bit to remove flow control char from the received data.*/
uint32_t force_xon: 1; /*Set this bit to clear ctsn to stop the transmitter from sending data.*/
uint32_t force_xoff: 1; /*Set this bit to set ctsn to enable the transmitter to go on sending data.*/
uint32_t send_xon: 1; /*Set this bit to send xon char， it is cleared by hardware automatically.*/
uint32_t send_xoff: 1; /*Set this bit to send xoff char， it is cleared by hardware automatically.*/
uint32_t reserved6: 26;
};
uint32_t val;
} flow_conf;
union {
struct {
uint32_t active_threshold:10; /*When the input rxd edge changes more than this register value， the uart is active from light sleeping mode.*/
uint32_t reserved10: 22;
};
uint32_t val;
} sleep_conf;
union {
struct {
uint32_t xon_threshold: 8; /*when the data amount in receiver's fifo is more than this register value， it will send a xoff char with uart_sw_flow_con_en set to 1.*/
uint32_t xoff_threshold: 8; /*When the data amount in receiver's fifo is less than this register value， it will send a xon char with uart_sw_flow_con_en set to 1.*/
uint32_t xon_char: 8; /*This register stores the xon flow control char.*/
uint32_t xoff_char: 8; /*This register stores the xoff flow control char.*/
};
uint32_t val;
} swfc_conf;
union {
struct {
uint32_t rx_idle_thrhd:10; /*when receiver takes more time than this register value to receive a byte data， it will produce frame end signal for uhci to stop receiving data.*/
uint32_t tx_idle_num: 10; /*This register is used to configure the duration time between transfers.*/
uint32_t tx_brk_num: 8; /*This register is used to configure the number of 0 send after the process of sending data is done. it is active when txd_brk is set to 1.*/
uint32_t reserved28: 4;
};
uint32_t val;
} idle_conf;
union {
struct {
uint32_t en: 1; /*Set this bit to choose rs485 mode.*/
uint32_t dl0_en: 1; /*Set this bit to delay the stop bit by 1 bit.*/
uint32_t dl1_en: 1; /*Set this bit to delay the stop bit by 1 bit.*/
uint32_t tx_rx_en: 1; /*Set this bit to enable loop-back transmitter's output data signal to receiver's input data signal.*/
uint32_t rx_busy_tx_en: 1; /*1: enable rs485's transmitter to send data when rs485's receiver is busy. 0:rs485's transmitter should not send data when its receiver is busy.*/
uint32_t rx_dly_num: 1; /*This register is used to delay the receiver's internal data signal.*/
uint32_t tx_dly_num: 4; /*This register is used to delay the transmitter's internal data signal.*/
uint32_t reserved10: 22;
};
uint32_t val;
} rs485_conf;
union {
struct {
uint32_t pre_idle_num:24; /*This register is used to configure the idle duration time before the first at_cmd is received by receiver， when the the duration is less than this register value it will not take the next data received as at_cmd char.*/
uint32_t reserved24: 8;
};
uint32_t val;
} at_cmd_precnt;
union {
struct {
uint32_t post_idle_num:24; /*This register is used to configure the duration time between the last at_cmd and the next data， when the duration is less than this register value it will not take the previous data as at_cmd char.*/
uint32_t reserved24: 8;
};
uint32_t val;
} at_cmd_postcnt;
union {
struct {
uint32_t rx_gap_tout:24; /*This register is used to configure the duration time between the at_cmd chars， when the duration time is less than this register value it will not take the data as continous at_cmd chars.*/
uint32_t reserved24: 8;
};
uint32_t val;
} at_cmd_gaptout;
union {
struct {
uint32_t data: 8; /*This register is used to configure the content of at_cmd char.*/
uint32_t char_num: 8; /*This register is used to configure the number of continuous at_cmd chars received by receiver.*/
uint32_t reserved16: 16;
};
uint32_t val;
} at_cmd_char;
union {
struct {
uint32_t mem_pd: 1; /*Set this bit to power down memory，when reg_mem_pd registers in the 3 uarts are all set to 1 memory will enter low power mode.*/
uint32_t reserved1: 1;
uint32_t reserved2: 1;
uint32_t rx_size: 4; /*This register is used to configure the amount of mem allocated to receiver's fifo. the default byte num is 128.*/
uint32_t tx_size: 4; /*This register is used to configure the amount of mem allocated to transmitter's fifo.the default byte num is 128.*/
uint32_t reserved11: 4;
uint32_t rx_flow_thrhd_h3: 3; /*refer to the rx_flow_thrhd's description.*/
uint32_t rx_tout_thrhd_h3: 3; /*refer to the rx_tout_thrhd's description.*/
uint32_t xon_threshold_h2: 2; /*refer to the uart_xon_threshold's description.*/
uint32_t xoff_threshold_h2: 2; /*refer to the uart_xoff_threshold's description.*/
uint32_t rx_mem_full_thrhd: 3; /*refer to the rxfifo_full_thrhd's description.*/
uint32_t tx_mem_empty_thrhd: 3; /*refer to txfifo_empty_thrhd 's description.*/
uint32_t reserved31: 1;
};
uint32_t val;
} mem_conf;
union {
struct {
uint32_t status:24;
uint32_t reserved24: 8;
};
uint32_t val;
} mem_tx_status;
union {
struct {
uint32_t status: 24;
uint32_t reserved24: 8;
};
struct {
uint32_t reserved0: 2;
uint32_t rd_addr: 11; /*This register stores the rx mem read address.*/
uint32_t wr_addr: 11; /*This register stores the rx mem write address.*/
uint32_t reserved: 8;
};
uint32_t val;
} mem_rx_status;
union {
struct {
uint32_t rx_cnt: 3; /*refer to the rxfifo_cnt's description.*/
uint32_t tx_cnt: 3; /*refer to the txfifo_cnt's description.*/
uint32_t reserved6: 26;
};
uint32_t val;
} mem_cnt_status;
union {
struct {
uint32_t min_cnt: 20; /*This register stores the count of rxd pos-edge edge， it is used in baudrate-detect process.*/
uint32_t reserved20: 12;
};
uint32_t val;
} pospulse;
union {
struct {
uint32_t min_cnt: 20; /*This register stores the count of rxd neg-edge edge， it is used in baudrate-detect process.*/
uint32_t reserved20: 12;
};
uint32_t val;
} negpulse;
uint32_t reserved_70;
uint32_t reserved_74;
uint32_t date; /**/
uint32_t id; /**/
} uart_dev_t;
extern uart_dev_t UART0;
extern uart_dev_t UART1;
extern uart_dev_t UART2;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_UART_STRUCT_H_ */

1260
tools/sdk/esp32/include/soc/soc/esp32/include/soc/uhci_reg.h Normal file
View File

File diff suppressed because it is too large Load Diff

349
tools/sdk/esp32/include/soc/soc/esp32/include/soc/uhci_struct.h Normal file
View File

@ -0,0 +1,349 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _SOC_UHCI_STRUCT_H_
#define _SOC_UHCI_STRUCT_H_
#include <stdint.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef volatile struct uhci_dev_s {
union {
struct {
uint32_t in_rst: 1; /*Set this bit to reset in link operations.*/
uint32_t out_rst: 1; /*Set this bit to reset out link operations.*/
uint32_t ahbm_fifo_rst: 1; /*Set this bit to reset dma ahb fifo.*/
uint32_t ahbm_rst: 1; /*Set this bit to reset dma ahb interface.*/
uint32_t in_loop_test: 1; /*Set this bit to enable loop test for in links.*/
uint32_t out_loop_test: 1; /*Set this bit to enable loop test for out links.*/
uint32_t out_auto_wrback: 1; /*when in link's length is 0 go on to use the next in link automatically.*/
uint32_t out_no_restart_clr: 1; /*don't use*/
uint32_t out_eof_mode: 1; /*Set this bit to produce eof after DMA pops all data clear this bit to produce eof after DMA pushes all data*/
uint32_t uart0_ce: 1; /*Set this bit to use UART to transmit or receive data.*/
uint32_t uart1_ce: 1; /*Set this bit to use UART1 to transmit or receive data.*/
uint32_t uart2_ce: 1; /*Set this bit to use UART2 to transmit or receive data.*/
uint32_t outdscr_burst_en: 1; /*Set this bit to enable DMA in links to use burst mode.*/
uint32_t indscr_burst_en: 1; /*Set this bit to enable DMA out links to use burst mode.*/
uint32_t out_data_burst_en: 1; /*Set this bit to enable DMA burst MODE*/
uint32_t mem_trans_en: 1;
uint32_t seper_en: 1; /*Set this bit to use special char to separate the data frame.*/
uint32_t head_en: 1; /*Set this bit to enable to use head packet before the data frame.*/
uint32_t crc_rec_en: 1; /*Set this bit to enable receiver''s ability of crc calculation when crc_en bit in head packet is 1 then there will be crc bytes after data_frame*/
uint32_t uart_idle_eof_en: 1; /*Set this bit to enable to use idle time when the idle time after data frame is satisfied this means the end of a data frame.*/
uint32_t len_eof_en: 1; /*Set this bit to enable to use packet_len in packet head when the received data is equal to packet_len this means the end of a data frame.*/
uint32_t encode_crc_en: 1; /*Set this bit to enable crc calculation for data frame when bit6 in the head packet is 1.*/
uint32_t clk_en: 1; /*Set this bit to enable clock-gating for read or write registers.*/
uint32_t uart_rx_brk_eof_en: 1; /*Set this bit to enable to use brk char as the end of a data frame.*/
uint32_t reserved24: 8;
};
uint32_t val;
} conf0;
union {
struct {
uint32_t rx_start: 1; /*when a separator char has been send it will produce uhci_rx_start_int interrupt.*/
uint32_t tx_start: 1; /*when DMA detects a separator char it will produce uhci_tx_start_int interrupt.*/
uint32_t rx_hung: 1; /*when DMA takes a lot of time to receive a data it will produce uhci_rx_hung_int interrupt.*/
uint32_t tx_hung: 1; /*when DMA takes a lot of time to read a data from RAM it will produce uhci_tx_hung_int interrupt.*/
uint32_t in_done: 1; /*when a in link descriptor has been completed it will produce uhci_in_done_int interrupt.*/
uint32_t in_suc_eof: 1; /*when a data packet has been received it will produce uhci_in_suc_eof_int interrupt.*/
uint32_t in_err_eof: 1; /*when there are some errors about eof in in link descriptor it will produce uhci_in_err_eof_int interrupt.*/
uint32_t out_done: 1; /*when a out link descriptor is completed it will produce uhci_out_done_int interrupt.*/
uint32_t out_eof: 1; /*when the current descriptor's eof bit is 1 it will produce uhci_out_eof_int interrupt.*/
uint32_t in_dscr_err: 1; /*when there are some errors about the out link descriptor it will produce uhci_in_dscr_err_int interrupt.*/
uint32_t out_dscr_err: 1; /*when there are some errors about the in link descriptor it will produce uhci_out_dscr_err_int interrupt.*/
uint32_t in_dscr_empty: 1; /*when there are not enough in links for DMA it will produce uhci_in_dscr_err_int interrupt.*/
uint32_t outlink_eof_err: 1; /*when there are some errors about eof in outlink descriptor it will produce uhci_outlink_eof_err_int interrupt.*/
uint32_t out_total_eof: 1; /*When all data have been send it will produce uhci_out_total_eof_int interrupt.*/
uint32_t send_s_q: 1; /*When use single send registers to send a short packets it will produce this interrupt when dma has send the short packet.*/
uint32_t send_a_q: 1; /*When use always_send registers to send a series of short packets it will produce this interrupt when dma has send the short packet.*/
uint32_t dma_in_fifo_full_wm: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} int_raw;
union {
struct {
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_hung: 1;
uint32_t tx_hung: 1;
uint32_t in_done: 1;
uint32_t in_suc_eof: 1;
uint32_t in_err_eof: 1;
uint32_t out_done: 1;
uint32_t out_eof: 1;
uint32_t in_dscr_err: 1;
uint32_t out_dscr_err: 1;
uint32_t in_dscr_empty: 1;
uint32_t outlink_eof_err: 1;
uint32_t out_total_eof: 1;
uint32_t send_s_q: 1;
uint32_t send_a_q: 1;
uint32_t dma_in_fifo_full_wm: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} int_st;
union {
struct {
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_hung: 1;
uint32_t tx_hung: 1;
uint32_t in_done: 1;
uint32_t in_suc_eof: 1;
uint32_t in_err_eof: 1;
uint32_t out_done: 1;
uint32_t out_eof: 1;
uint32_t in_dscr_err: 1;
uint32_t out_dscr_err: 1;
uint32_t in_dscr_empty: 1;
uint32_t outlink_eof_err: 1;
uint32_t out_total_eof: 1;
uint32_t send_s_q: 1;
uint32_t send_a_q: 1;
uint32_t dma_in_fifo_full_wm: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} int_ena;
union {
struct {
uint32_t rx_start: 1;
uint32_t tx_start: 1;
uint32_t rx_hung: 1;
uint32_t tx_hung: 1;
uint32_t in_done: 1;
uint32_t in_suc_eof: 1;
uint32_t in_err_eof: 1;
uint32_t out_done: 1;
uint32_t out_eof: 1;
uint32_t in_dscr_err: 1;
uint32_t out_dscr_err: 1;
uint32_t in_dscr_empty: 1;
uint32_t outlink_eof_err: 1;
uint32_t out_total_eof: 1;
uint32_t send_s_q: 1;
uint32_t send_a_q: 1;
uint32_t dma_in_fifo_full_wm: 1;
uint32_t reserved17: 15;
};
uint32_t val;
} int_clr;
union {
struct {
uint32_t full: 1; /*1:DMA out link descriptor's fifo is full.*/
uint32_t empty: 1; /*1:DMA in link descriptor's fifo is empty.*/
uint32_t reserved2: 30;
};
uint32_t val;
} dma_out_status;
union {
struct {
uint32_t fifo_wdata: 9; /*This is the data need to be pushed into out link descriptor's fifo.*/
uint32_t reserved9: 7;
uint32_t fifo_push: 1; /*Set this bit to push data in out link descriptor's fifo.*/
uint32_t reserved17:15;
};
uint32_t val;
} dma_out_push;
union {
struct {
uint32_t full: 1;
uint32_t empty: 1;
uint32_t reserved2: 2;
uint32_t rx_err_cause: 3; /*This register stores the errors caused in out link descriptor's data packet.*/
uint32_t reserved7: 25;
};
uint32_t val;
} dma_in_status;
union {
struct {
uint32_t fifo_rdata: 12; /*This register stores the data pop from in link descriptor's fifo.*/
uint32_t reserved12: 4;
uint32_t fifo_pop: 1; /*Set this bit to pop data in in link descriptor's fifo.*/
uint32_t reserved17: 15;
};
uint32_t val;
} dma_in_pop;
union {
struct {
uint32_t addr: 20; /*This register stores the least 20 bits of the first out link descriptor's address.*/
uint32_t reserved20: 8;
uint32_t stop: 1; /*Set this bit to stop dealing with the out link descriptors.*/
uint32_t start: 1; /*Set this bit to start dealing with the out link descriptors.*/
uint32_t restart: 1; /*Set this bit to mount on new out link descriptors*/
uint32_t park: 1; /*1： the out link descriptor's fsm is in idle state. 0:the out link descriptor's fsm is working.*/
};
uint32_t val;
} dma_out_link;
union {
struct {
uint32_t addr: 20; /*This register stores the least 20 bits of the first in link descriptor's address.*/
uint32_t auto_ret: 1; /*1:when a packet is wrong in link descriptor returns to the descriptor which is lately used.*/
uint32_t reserved21: 7;
uint32_t stop: 1; /*Set this bit to stop dealing with the in link descriptors.*/
uint32_t start: 1; /*Set this bit to start dealing with the in link descriptors.*/
uint32_t restart: 1; /*Set this bit to mount on new in link descriptors*/
uint32_t park: 1; /*1:the in link descriptor's fsm is in idle state. 0:the in link descriptor's fsm is working*/
};
uint32_t val;
} dma_in_link;
union {
struct {
uint32_t check_sum_en: 1; /*Set this bit to enable decoder to check check_sum in packet header.*/
uint32_t check_seq_en: 1; /*Set this bit to enable decoder to check seq num in packet header.*/
uint32_t crc_disable: 1; /*Set this bit to disable crc calculation.*/
uint32_t save_head: 1; /*Set this bit to save packet header .*/
uint32_t tx_check_sum_re: 1; /*Set this bit to enable hardware replace check_sum in packet header automatically.*/
uint32_t tx_ack_num_re: 1; /*Set this bit to enable hardware replace ack num in packet header automatically.*/
uint32_t check_owner: 1; /*Set this bit to check the owner bit in link descriptor.*/
uint32_t wait_sw_start: 1; /*Set this bit to enable software way to add packet header.*/
uint32_t sw_start: 1; /*Set this bit to start inserting the packet header.*/
uint32_t dma_in_fifo_full_thrs:12; /*when data amount in link descriptor's fifo is more than this register value it will produce uhci_dma_in_fifo_full_wm_int interrupt.*/
uint32_t reserved21: 11;
};
uint32_t val;
} conf1;
uint32_t state0; /**/
uint32_t state1; /**/
uint32_t dma_out_eof_des_addr; /*This register stores the address of out link description when eof bit in this descriptor is 1.*/
uint32_t dma_in_suc_eof_des_addr; /*This register stores the address of in link descriptor when eof bit in this descriptor is 1.*/
uint32_t dma_in_err_eof_des_addr; /*This register stores the address of in link descriptor when there are some errors in this descriptor.*/
uint32_t dma_out_eof_bfr_des_addr; /*This register stores the address of out link descriptor when there are some errors in this descriptor.*/
union {
struct {
uint32_t test_mode: 3; /*bit2 is ahb bus test enable ，bit1 is used to choose write(1) or read(0) mode. bit0 is used to choose test only once(1) or continue(0)*/
uint32_t reserved3: 1;
uint32_t test_addr: 2; /*The two bits represent ahb bus address bit[20:19]*/
uint32_t reserved6: 26;
};
uint32_t val;
} ahb_test;
uint32_t dma_in_dscr; /*The content of current in link descriptor's third dword*/
uint32_t dma_in_dscr_bf0; /*The content of current in link descriptor's first dword*/
uint32_t dma_in_dscr_bf1; /*The content of current in link descriptor's second dword*/
uint32_t dma_out_dscr; /*The content of current out link descriptor's third dword*/
uint32_t dma_out_dscr_bf0; /*The content of current out link descriptor's first dword*/
uint32_t dma_out_dscr_bf1; /*The content of current out link descriptor's second dword*/
union {
struct {
uint32_t tx_c0_esc_en: 1; /*Set this bit to enable 0xc0 char decode when DMA receives data.*/
uint32_t tx_db_esc_en: 1; /*Set this bit to enable 0xdb char decode when DMA receives data.*/
uint32_t tx_11_esc_en: 1; /*Set this bit to enable flow control char 0x11 decode when DMA receives data.*/
uint32_t tx_13_esc_en: 1; /*Set this bit to enable flow control char 0x13 decode when DMA receives data.*/
uint32_t rx_c0_esc_en: 1; /*Set this bit to enable 0xc0 char replace when DMA sends data.*/
uint32_t rx_db_esc_en: 1; /*Set this bit to enable 0xdb char replace when DMA sends data.*/
uint32_t rx_11_esc_en: 1; /*Set this bit to enable flow control char 0x11 replace when DMA sends data.*/
uint32_t rx_13_esc_en: 1; /*Set this bit to enable flow control char 0x13 replace when DMA sends data.*/
uint32_t reserved8: 24;
};
uint32_t val;
} escape_conf;
union {
struct {
uint32_t txfifo_timeout: 8; /*This register stores the timeout value.when DMA takes more time than this register value to receive a data it will produce uhci_tx_hung_int interrupt.*/
uint32_t txfifo_timeout_shift: 3; /*The tick count is cleared when its value >=(17'd8000>>reg_txfifo_timeout_shift)*/
uint32_t txfifo_timeout_ena: 1; /*The enable bit for tx fifo receive data timeout*/
uint32_t rxfifo_timeout: 8; /*This register stores the timeout value.when DMA takes more time than this register value to read a data from RAM it will produce uhci_rx_hung_int interrupt.*/
uint32_t rxfifo_timeout_shift: 3; /*The tick count is cleared when its value >=(17'd8000>>reg_rxfifo_timeout_shift)*/
uint32_t rxfifo_timeout_ena: 1; /*This is the enable bit for DMA send data timeout*/
uint32_t reserved24: 8;
};
uint32_t val;
} hung_conf;
uint32_t ack_num; /**/
uint32_t rx_head; /*This register stores the packet header received by DMA*/
union {
struct {
uint32_t single_send_num: 3; /*The bits are used to choose which short packet*/
uint32_t single_send_en: 1; /*Set this bit to enable send a short packet*/
uint32_t always_send_num: 3; /*The bits are used to choose which short packet*/
uint32_t always_send_en: 1; /*Set this bit to enable continuously send the same short packet*/
uint32_t reserved8: 24;
};
uint32_t val;
} quick_sent;
struct{
uint32_t w_data[2]; /*This register stores the content of short packet's dword*/
} q_data[7];
union {
struct {
uint32_t seper_char: 8; /*This register stores the separator char separator char is used to separate the data frame.*/
uint32_t seper_esc_char0: 8; /*This register stores the first char used to replace separator char in data.*/
uint32_t seper_esc_char1: 8; /*This register stores the second char used to replace separator char in data . 0xdc 0xdb replace 0xc0 by default.*/
uint32_t reserved24: 8;
};
uint32_t val;
} esc_conf0;
union {
struct {
uint32_t seq0: 8; /*This register stores the first substitute char used to replace the separate char.*/
uint32_t seq0_char0: 8; /*This register stores the first char used to replace reg_esc_seq0 in data.*/
uint32_t seq0_char1: 8; /*This register stores the second char used to replace the reg_esc_seq0 in data*/
uint32_t reserved24: 8;
};
uint32_t val;
} esc_conf1;
union {
struct {
uint32_t seq1: 8; /*This register stores the flow control char to turn on the flow_control*/
uint32_t seq1_char0: 8; /*This register stores the first char used to replace the reg_esc_seq1 in data.*/
uint32_t seq1_char1: 8; /*This register stores the second char used to replace the reg_esc_seq1 in data.*/
uint32_t reserved24: 8;
};
uint32_t val;
} esc_conf2;
union {
struct {
uint32_t seq2: 8; /*This register stores the flow_control char to turn off the flow_control*/
uint32_t seq2_char0: 8; /*This register stores the first char used to replace the reg_esc_seq2 in data.*/
uint32_t seq2_char1: 8; /*This register stores the second char used to replace the reg_esc_seq2 in data.*/
uint32_t reserved24: 8;
};
uint32_t val;
} esc_conf3;
union {
struct {
uint32_t thrs: 13; /*when the amount of packet payload is larger than this value the process of receiving data is done.*/
uint32_t reserved13:19;
};
uint32_t val;
} pkt_thres;
uint32_t reserved_c4;
uint32_t reserved_c8;
uint32_t reserved_cc;
uint32_t reserved_d0;
uint32_t reserved_d4;
uint32_t reserved_d8;
uint32_t reserved_dc;
uint32_t reserved_e0;
uint32_t reserved_e4;
uint32_t reserved_e8;
uint32_t reserved_ec;
uint32_t reserved_f0;
uint32_t reserved_f4;
uint32_t reserved_f8;
uint32_t date; /*version information*/
} uhci_dev_t;
extern uhci_dev_t UHCI0;
extern uhci_dev_t UHCI1;
#ifdef __cplusplus
}
#endif
#endif /* _SOC_UHCI_STRUCT_H_ */

20
tools/sdk/esp32/include/soc/soc/esp32/include/soc/wdev_reg.h Normal file
View File

@ -0,0 +1,20 @@
// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "soc.h"
/* Hardware random number generator register */
#define WDEV_RND_REG 0x60035144

41
tools/sdk/esp32/include/soc/soc/include/soc/adc_periph.h Normal file
View File

@ -0,0 +1,41 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "soc/soc.h"
#include "soc/syscon_struct.h"
#include "soc/sens_reg.h"
#include "soc/sens_struct.h"
#include "soc/rtc_io_struct.h"
#include "soc/rtc_cntl_struct.h"
#include "soc/adc_channel.h"
#include "soc/adc_caps.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* Store IO number corresponding to the ADC channel number.
*
* @value
* - >=0 : GPIO number index.
* - -1 : Not support.
*/
extern const int adc_channel_io_map[SOC_ADC_PERIPH_NUM][SOC_ADC_MAX_CHANNEL_NUM];
#ifdef __cplusplus
}
#endif

30
tools/sdk/esp32/include/soc/soc/include/soc/can_periph.h Normal file
View File

@ -0,0 +1,30 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "sdkconfig.h"
#ifdef __cplusplus
extern "C" {
#endif
#if CONFIG_IDF_TARGET_ESP32
#include "soc/can_struct.h"
#include "soc/can_caps.h"
#endif
#ifdef __cplusplus
}
#endif

38
tools/sdk/esp32/include/soc/soc/include/soc/dac_periph.h Normal file
View File

@ -0,0 +1,38 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "soc/sens_reg.h"
#include "soc/sens_struct.h"
#include "soc/rtc_io_reg.h"
#include "soc/rtc_io_struct.h"
#include "soc/rtc.h"
#include "soc/dac_channel.h"
#include "soc/dac_caps.h"
#ifdef __cplusplus
extern "C"
{
#endif
typedef struct {
const uint8_t dac_channel_io_num[SOC_DAC_PERIPH_NUM];
} dac_signal_conn_t;
extern const dac_signal_conn_t dac_periph_signal;
#ifdef __cplusplus
}
#endif

16
tools/sdk/esp32/include/soc/soc/include/soc/efuse_periph.h Normal file
View File

@ -0,0 +1,16 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "soc/efuse_reg.h"

15
tools/sdk/esp32/include/soc/soc/include/soc/emac_periph.h Normal file
View File

@ -0,0 +1,15 @@
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once

34
tools/sdk/esp32/include/soc/soc/include/soc/gpio_periph.h Normal file
View File

@ -0,0 +1,34 @@
// Copyright 2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "stdint.h"
#include "soc/io_mux_reg.h"
#include "soc/gpio_struct.h"
#include "soc/gpio_reg.h"
#include "soc/gpio_caps.h"
#include "soc/gpio_sig_map.h"
#ifdef __cplusplus
extern "C"
{
#endif
extern const uint32_t GPIO_PIN_MUX_REG[GPIO_PIN_COUNT];
extern const uint32_t GPIO_HOLD_MASK[GPIO_PIN_COUNT];
#ifdef __cplusplus
}
#endif

Some files were not shown because too many files have changed in this diff Show More