feedc0de/arduino-esp32
1
0
Fork 0
forked from espressif/arduino-esp32
Code Pull Requests Activity

IDF release/v3.3 (#3339)

Browse Source 
* IDF release/v3.3 46b12a560

* fix build

* IDF release/v3.3 367c3c09c
This commit is contained in:
Me No Dev
2020-01-20 22:07:04 +02:00
committed by GitHub
parent 307b1368dd
commit 1977370e6f
282 changed files with 13004 additions and 4377 deletions
Download Patch File Download Diff File Expand all files Collapse all files

35
tools/sdk/include/esp32/esp_attr.h
View File

@ -14,17 +14,19 @@
#ifndef __ESP_ATTR_H__
#define __ESP_ATTR_H__
#include "sdkconfig.h"
#define ROMFN_ATTR
//Normally, the linker script will put all code and rodata in flash,
//and all variables in shared RAM. These macros can be used to redirect
//particular functions/variables to other memory regions.
// Forces code into IRAM instead of flash.
#define IRAM_ATTR __attribute__((section(".iram1")))
// Forces code into IRAM instead of flash
#define IRAM_ATTR _SECTION_ATTR_IMPL(".iram1", __COUNTER__)
// Forces data into DRAM instead of flash
#define DRAM_ATTR __attribute__((section(".dram1")))
#define DRAM_ATTR _SECTION_ATTR_IMPL(".dram1", __COUNTER__)
// Forces data to be 4 bytes aligned
#define WORD_ALIGNED_ATTR __attribute__((aligned(4)))
@ -37,11 +39,11 @@
#define DRAM_STR(str) (__extension__({static const DRAM_ATTR char __c[] = (str); (const char *)&__c;}))
// Forces code into RTC fast memory. See "docs/deep-sleep-stub.rst"
#define RTC_IRAM_ATTR __attribute__((section(".rtc.text")))
#define RTC_IRAM_ATTR _SECTION_ATTR_IMPL(".rtc.text", __COUNTER__)
#if CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY
// Forces bss variable into external memory. "
#define EXT_RAM_ATTR __attribute__((section(".ext_ram.bss")))
#define EXT_RAM_ATTR _SECTION_ATTR_IMPL(".ext_ram.bss", __COUNTER__)
#else
#define EXT_RAM_ATTR
#endif
@ -49,26 +51,37 @@
// Forces data into RTC slow memory. See "docs/deep-sleep-stub.rst"
// Any variable marked with this attribute will keep its value
// during a deep sleep / wake cycle.
#define RTC_DATA_ATTR __attribute__((section(".rtc.data")))
#define RTC_DATA_ATTR _SECTION_ATTR_IMPL(".rtc.data", __COUNTER__)
// Forces read-only data into RTC memory. See "docs/deep-sleep-stub.rst"
#define RTC_RODATA_ATTR __attribute__((section(".rtc.rodata")))
#define RTC_RODATA_ATTR _SECTION_ATTR_IMPL(".rtc.rodata", __COUNTER__)
// Allows to place data into RTC_SLOW memory.
#define RTC_SLOW_ATTR __attribute__((section(".rtc.force_slow")))
#define RTC_SLOW_ATTR _SECTION_ATTR_IMPL(".rtc.force_slow", __COUNTER__)
// Allows to place data into RTC_FAST memory.
#define RTC_FAST_ATTR __attribute__((section(".rtc.force_fast")))
#define RTC_FAST_ATTR _SECTION_ATTR_IMPL(".rtc.force_fast", __COUNTER__)
// Forces data into noinit section to avoid initialization after restart.
#define __NOINIT_ATTR __attribute__((section(".noinit")))
#define __NOINIT_ATTR _SECTION_ATTR_IMPL(".noinit", __COUNTER__)
// Forces data into RTC slow memory of .noinit section.
// Any variable marked with this attribute will keep its value
// after restart or during a deep sleep / wake cycle.
#define RTC_NOINIT_ATTR __attribute__((section(".rtc_noinit")))
#define RTC_NOINIT_ATTR _SECTION_ATTR_IMPL(".rtc_noinit", __COUNTER__)
// Forces to not inline function
#define NOINLINE_ATTR __attribute__((noinline))
// Implementation for a unique custom section
//
// This prevents gcc producing "x causes a section type conflict with y"
// errors if two variables in the same source file have different linkage (maybe const & non-const) but are placed in the same custom section
//
// Using unique sections also means --gc-sections can remove unused
// data with a custom section type set
#define _SECTION_ATTR_IMPL(SECTION, COUNTER) __attribute__((section(SECTION "." _COUNTER_STRINGIFY(COUNTER))))
#define _COUNTER_STRINGIFY(COUNTER) #COUNTER
#endif /* __ESP_ATTR_H__ */

1
tools/sdk/include/esp32/esp_clk.h
View File

@ -13,6 +13,7 @@
// limitations under the License.
#pragma once
#include <stdint.h>
/**
* @file esp_clk.h

14
tools/sdk/include/esp32/esp_coexist_internal.h
View File

@ -31,6 +31,14 @@ typedef enum {
typedef void (* coex_func_cb_t)(uint32_t event, int sched_cnt);
/**
* @brief Pre-Init software coexist
* extern function for internal use.
*
* @return Init ok or failed.
*/
esp_err_t coex_pre_init(void);
/**
* @brief Init software coexist
* extern function for internal use.
@ -79,6 +87,12 @@ esp_err_t coex_preference_set(coex_prefer_t prefer);
*/
uint32_t coex_status_get(void);
/**
* @brief Set software coexist condition.
* @return : software coexist condition
*/
void coex_condition_set(uint32_t type, bool dissatisfy);
/**
* @brief WiFi requests coexistence.
*

64
tools/sdk/include/esp32/esp_core_dump.h
View File

@ -1,64 +0,0 @@
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef ESP_CORE_DUMP_H_
#define ESP_CORE_DUMP_H_
/**
* @brief Initializes core dump module internal data.
*
* @note Should be called at system startup.
*/
void esp_core_dump_init();
/**
* @brief Saves core dump to flash.
*
* The structure of data stored in flash is as follows:
* | MAGIC1 |
* | TOTAL_LEN | TASKS_NUM | TCB_SIZE |
* | TCB_ADDR_1 | STACK_TOP_1 | STACK_END_1 | TCB_1 | STACK_1 |
* . . . .
* . . . .
* | TCB_ADDR_N | STACK_TOP_N | STACK_END_N | TCB_N | STACK_N |
* | MAGIC2 |
* Core dump in flash consists of header and data for every task in the system at the moment of crash.
* For flash data integrity control two magic numbers are used at the beginning and the end of core dump.
* The structure of core dump data is described below in details.
* 1) MAGIC1 and MAGIC2 are special numbers stored at the beginning and the end of core dump.
* They are used to control core dump data integrity. Size of every number is 4 bytes.
* 2) Core dump starts with header:
* 2.1) TOTAL_LEN is total length of core dump data in flash including magic numbers. Size is 4 bytes.
* 2.2) TASKS_NUM is the number of tasks for which data are stored. Size is 4 bytes.
* 2.3) TCB_SIZE is the size of task's TCB structure. Size is 4 bytes.
* 3) Core dump header is followed by the data for every task in the system.
* Task data are started with task header:
* 3.1) TCB_ADDR is the address of TCB in memory. Size is 4 bytes.
* 3.2) STACK_TOP is the top of task's stack (address of the topmost stack item). Size is 4 bytes.
* 3.2) STACK_END is the end of task's stack (address from which task's stack starts). Size is 4 bytes.
* 4) Task header is followed by TCB data. Size is TCB_SIZE bytes.
* 5) Task's stack is placed after TCB data. Size is (STACK_END - STACK_TOP) bytes.
*/
void esp_core_dump_to_flash();
/**
* @brief Print base64-encoded core dump to UART.
*
* The structure of core dump data is the same as for data stored in flash (@see esp_core_dump_to_flash) with some notes:
* 1) Magic numbers are not present in core dump printed to UART.
* 2) Since magic numbers are omitted TOTAL_LEN does not include their size.
* 3) Printed base64 data are surrounded with special messages to help user recognize the start and end of actual data.
*/
void esp_core_dump_to_uart();
#endif

5
tools/sdk/include/esp32/esp_event_legacy.h
View File

@ -121,6 +121,10 @@ typedef struct {
uint8_t mac[6]; /**< MAC address of the station which send probe request */
} system_event_ap_probe_req_rx_t;
typedef struct {
ip4_addr_t ip;
} system_event_ap_staipassigned_t;
typedef union {
system_event_sta_connected_t connected; /**< ESP32 station connected to AP */
system_event_sta_disconnected_t disconnected; /**< ESP32 station disconnected to AP */
@ -132,6 +136,7 @@ typedef union {
system_event_ap_staconnected_t sta_connected; /**< a station connected to ESP32 soft-AP */
system_event_ap_stadisconnected_t sta_disconnected; /**< a station disconnected to ESP32 soft-AP */
system_event_ap_probe_req_rx_t ap_probereqrecved; /**< ESP32 soft-AP receive probe request packet */
system_event_ap_staipassigned_t ap_staipassigned; /**< ESP32 soft-AP assign an IP to the station*/
system_event_got_ip6_t got_ip6; /**< ESP32 station　or ap or ethernet ipv6 addr state change to preferred */
} system_event_info_t;

14
tools/sdk/include/esp32/esp_flash_data_types.h
View File

@ -24,11 +24,22 @@ extern "C"
#define ESP_PARTITION_MAGIC 0x50AA
#define ESP_PARTITION_MAGIC_MD5 0xEBEB
/// OTA_DATA states for checking operability of the app.
typedef enum {
ESP_OTA_IMG_NEW = 0x0U, /*!< Monitor the first boot. In bootloader this state is changed to ESP_OTA_IMG_PENDING_VERIFY. */
ESP_OTA_IMG_PENDING_VERIFY = 0x1U, /*!< First boot for this app was. If while the second boot this state is then it will be changed to ABORTED. */
ESP_OTA_IMG_VALID = 0x2U, /*!< App was confirmed as workable. App can boot and work without limits. */
ESP_OTA_IMG_INVALID = 0x3U, /*!< App was confirmed as non-workable. This app will not selected to boot at all. */
ESP_OTA_IMG_ABORTED = 0x4U, /*!< App could not confirm the workable or non-workable. In bootloader IMG_PENDING_VERIFY state will be changed to IMG_ABORTED. This app will not selected to boot at all. */
ESP_OTA_IMG_UNDEFINED = 0xFFFFFFFFU, /*!< Undefined. App can boot and work without limits. */
} esp_ota_img_states_t;
/* OTA selection structure (two copies in the OTA data partition.)
Size of 32 bytes is friendly to flash encryption */
typedef struct {
uint32_t ota_seq;
uint8_t seq_label[24];
uint8_t seq_label[20];
uint32_t ota_state;
uint32_t crc; /* CRC32 of ota_seq field only */
} esp_ota_select_entry_t;
@ -61,6 +72,7 @@ typedef struct {
#define PART_SUBTYPE_DATA_RF 0x01
#define PART_SUBTYPE_DATA_WIFI 0x02
#define PART_SUBTYPE_DATA_NVS_KEYS 0x04
#define PART_SUBTYPE_DATA_EFUSE_EM 0x05
#define PART_TYPE_END 0xff
#define PART_SUBTYPE_END 0xff

12
tools/sdk/include/esp32/esp_phy_init.h
View File

@ -156,6 +156,18 @@ esp_err_t esp_phy_load_cal_data_from_nvs(esp_phy_calibration_data_t* out_cal_dat
*/
esp_err_t esp_phy_store_cal_data_to_nvs(const esp_phy_calibration_data_t* cal_data);
/**
* @brief Erase PHY calibration data which is stored in the NVS
*
* This is a function which can be used to trigger full calibration as a last-resort remedy
* if partial calibration is used. It can be called in the application based on some conditions
* (e.g. an option provided in some diagnostic mode).
*
* @return ESP_OK on success
* @return others on fail. Please refer to NVS API return value error number.
*/
esp_err_t esp_phy_erase_cal_data_in_nvs(void);
/**
* @brief Initialize PHY and RF module
*

2
tools/sdk/include/esp32/esp_wifi.h
View File

@ -543,7 +543,7 @@ esp_err_t esp_wifi_get_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t *bw);
* @brief Set primary/secondary channel of ESP32
*
* @attention 1. This is a special API for sniffer
* @attention 2. This API should be called after esp_wifi_start() or esp_wifi_set_promiscuous()
* @attention 2. This API should be called after esp_wifi_start() and esp_wifi_set_promiscuous()
*
* @param primary for HT20, primary is the channel number, for HT40, primary is the primary channel
* @param second for HT20, second is ignored, for HT40, second is the second channel

82
tools/sdk/include/esp32/esp_wifi_internal.h
View File

@ -46,6 +46,40 @@ typedef struct {
void *storage; /**< storage for FreeRTOS queue */
} wifi_static_queue_t;
/**
* @brief WiFi log level
*
*/
typedef enum {
WIFI_LOG_ERROR = 0, /*enabled by default*/
WIFI_LOG_WARNING, /*enabled by default*/
WIFI_LOG_INFO, /*enabled by default*/
WIFI_LOG_DEBUG, /*can be set in menuconfig*/
WIFI_LOG_VERBOSE, /*can be set in menuconfig*/
} wifi_log_level_t;
/**
* @brief WiFi log module definition
*
*/
typedef enum {
WIFI_LOG_MODULE_ALL = 0, /*all log modules */
WIFI_LOG_MODULE_WIFI, /*logs related to WiFi*/
WIFI_LOG_MODULE_COEX, /*logs related to WiFi and BT(or BLE) coexist*/
WIFI_LOG_MODULE_MESH, /*logs related to Mesh*/
} wifi_log_module_t;
/**
* @brief WiFi log submodule definition
*
*/
#define WIFI_LOG_SUBMODULE_ALL (0) /*all log submodules*/
#define WIFI_LOG_SUBMODULE_INIT (1) /*logs related to initialization*/
#define WIFI_LOG_SUBMODULE_IOCTL (1<<1) /*logs related to API calling*/
#define WIFI_LOG_SUBMODULE_CONN (1<<2) /*logs related to connecting*/
#define WIFI_LOG_SUBMODULE_SCAN (1<<3) /*logs related to scaning*/
/**
* @brief Initialize Wi-Fi Driver
* Alloc resource for WiFi driver, such as WiFi control structure, RX/TX buffer,
@ -245,16 +279,44 @@ typedef esp_err_t (* wifi_mac_time_update_cb_t)( uint32_t time_delta );
esp_err_t esp_wifi_internal_update_mac_time( uint32_t time_delta );
/**
* @brief A general API to set/get WiFi internal configuration, it's for debug only
*
* @param cmd : ioctl command type
* @param cfg : configuration for the command
*
* @return
* - ESP_OK: succeed
* - others: failed
*/
esp_err_t esp_wifi_internal_ioctl(int cmd, wifi_ioctl_config_t *cfg);
* @brief Set current WiFi log level
*
* @param level Log level.
*
* @return
* - ESP_OK: succeed
* - ESP_FAIL: level is invalid
*/
esp_err_t esp_wifi_internal_set_log_level(wifi_log_level_t level);
/**
* @brief Set current log module and submodule
*
* @param module Log module
* @param submodule Log submodule
* @param enable enable or disable
* If module == 0 && enable == 0, all log modules are disabled.
* If module == 0 && enable == 1, all log modules are enabled.
* If submodule == 0 && enable == 0, all log submodules are disabled.
* If submodule == 0 && enable == 1, all log submodules are enabled.
*
* @return
* - ESP_OK: succeed
* - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init
* - ESP_ERR_WIFI_ARG: invalid argument
*/
esp_err_t esp_wifi_internal_set_log_mod(wifi_log_module_t module, uint32_t submodule, bool enable);
/**
* @brief Get current WiFi log info
*
* @param log_level the return log level.
* @param log_mod the return log module and submodule
*
* @return
* - ESP_OK: succeed
*/
esp_err_t esp_wifi_internal_get_log(wifi_log_level_t *log_level, uint32_t *log_mod);
#ifdef __cplusplus
}

3
tools/sdk/include/esp32/esp_wifi_os_adapter.h
View File

@ -21,7 +21,7 @@
extern "C" {
#endif
#define ESP_WIFI_OS_ADAPTER_VERSION 0x00000002
#define ESP_WIFI_OS_ADAPTER_VERSION 0x00000004
#define ESP_WIFI_OS_ADAPTER_MAGIC 0xDEADBEAF
#define OSI_FUNCS_TIME_BLOCKING 0xffffffff
@ -121,6 +121,7 @@ typedef struct {
void (* _sc_ack_send)(void *param);
void (* _sc_ack_send_stop)(void);
uint32_t (* _coex_status_get)(void);
void (* _coex_condition_set)(uint32_t type, bool dissatisfy);
int32_t (* _coex_wifi_request)(uint32_t event, uint32_t latency, uint32_t duration);
int32_t (* _coex_wifi_release)(uint32_t event);
int32_t _magic;

57
tools/sdk/include/esp32/rom/crc.h
View File

@ -30,15 +30,48 @@ extern "C" {
*/
/* Standard CRC8/16/32 algorithms. */
// CRC-8 x8+x2+x1+1 0x07
// CRC16-CCITT x16+x12+x5+1 1021 ISO HDLC, ITU X.25, V.34/V.41/V.42, PPP-FCS
// CRC32:
//G(x) = x32 +x26 + x23 + x22 + x16 + x12 + x11 + x10 + x8 + x7 + x5 + x4 + x2 + x1 + 1
//If your buf is not continuous, you can use the first result to be the second parameter.
/* Notes about CRC APIs usage
* The ESP32 ROM include some CRC tables and CRC APIs to speed up CRC calculation.
* The CRC APIs include CRC8, CRC16, CRC32 algorithms for both little endian and big endian modes.
* Here are the polynomials for the algorithms:
* CRC-8 x8+x2+x1+1 0x07
* CRC16-CCITT x16+x12+x5+1 0x1021
* CRC32 x32+x26+x23+x22+x16+x12+x11+x10+x8+x7+x5+x4+x2+x1+1 0x04c11db7
*
* These group of CRC APIs are designed to calculate the data in buffers either continuous or not.
* To make it easy, we had added a `~` at the beginning and the end of the functions.
* To calculate non-continuous buffers, we can write the code like this:
* init = ~init;
* crc = crc32_le(init, buf0, length0);
* crc = crc32_le(crc, buf1, length1);
* crc = ~crc;
*
* However, it is not easy to select which API to use and give the correct parameters.
* A specific CRC algorithm will include this parameters: width, polynomials, init, refin, refout, xorout
* refin and refout show the endian of the algorithm:
* if both of them are true, please use the little endian API.
* if both of them are false, please use the big endian API.
* xorout is the value which you need to be xored to the raw result.
* However, these group of APIs need one '~' before and after the APIs.
*
* Here are some examples for CRC16:
* CRC-16/CCITT, poly = 0x1021, init = 0x0000, refin = true, refout = true, xorout = 0x0000
* crc = ~crc16_le((uint16_t)~0x0000, buf, length);
*
* CRC-16/CCITT-FALSE, poly = 0x1021, init = 0xffff, refin = false, refout = false, xorout = 0x0000
* crc = ~crc16_be((uint16_t)~0xffff, buf, length);
*
* CRC-16/X25, poly = 0x1021, init = 0xffff, refin = true, refout = true, xorout = 0xffff
* crc = (~crc16_le((uint16_t)~(0xffff), buf, length))^0xffff;
*
* CRC-16/XMODEM, poly= 0x1021, init = 0x0000, refin = false, refout = false, xorout = 0x0000
* crc = ~crc16_be((uint16_t)~0x0000, buf, length);
*
*
*/
/**
* @brief Crc32 value that is in little endian.
* @brief CRC32 value that is in little endian.
*
* @param uint32_t crc : init crc value, use 0 at the first use.
*
@ -51,7 +84,7 @@ extern "C" {
uint32_t crc32_le(uint32_t crc, uint8_t const *buf, uint32_t len);
/**
* @brief Crc32 value that is in big endian.
* @brief CRC32 value that is in big endian.
*
* @param uint32_t crc : init crc value, use 0 at the first use.
*
@ -64,7 +97,7 @@ uint32_t crc32_le(uint32_t crc, uint8_t const *buf, uint32_t len);
uint32_t crc32_be(uint32_t crc, uint8_t const *buf, uint32_t len);
/**
* @brief Crc16 value that is in little endian.
* @brief CRC16 value that is in little endian.
*
* @param uint16_t crc : init crc value, use 0 at the first use.
*
@ -77,7 +110,7 @@ uint32_t crc32_be(uint32_t crc, uint8_t const *buf, uint32_t len);
uint16_t crc16_le(uint16_t crc, uint8_t const *buf, uint32_t len);
/**
* @brief Crc16 value that is in big endian.
* @brief CRC16 value that is in big endian.
*
* @param uint16_t crc : init crc value, use 0 at the first use.
*
@ -90,7 +123,7 @@ uint16_t crc16_le(uint16_t crc, uint8_t const *buf, uint32_t len);
uint16_t crc16_be(uint16_t crc, uint8_t const *buf, uint32_t len);
/**
* @brief Crc8 value that is in little endian.
* @brief CRC8 value that is in little endian.
*
* @param uint8_t crc : init crc value, use 0 at the first use.
*
@ -103,7 +136,7 @@ uint16_t crc16_be(uint16_t crc, uint8_t const *buf, uint32_t len);
uint8_t crc8_le(uint8_t crc, uint8_t const *buf, uint32_t len);
/**
* @brief Crc8 value that is in big endian.
* @brief CRC8 value that is in big endian.
*
* @param uint32_t crc : init crc value, use 0 at the first use.
*

5
tools/sdk/include/esp32/rom/spi_flash.h
View File

@ -118,6 +118,11 @@ extern "C" {
#define ESP_ROM_SPIFLASH_WR_PROTECT (ESP_ROM_SPIFLASH_BP0|ESP_ROM_SPIFLASH_BP1|ESP_ROM_SPIFLASH_BP2)
#define ESP_ROM_SPIFLASH_QE BIT9
//Extra dummy for flash read
#define ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_20M 0
#define ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_40M 1
#define ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_80M 2
#define FLASH_ID_GD25LQ32C 0xC86016
typedef enum {

6
tools/sdk/include/esp32/rom/uart.h
View File

@ -36,7 +36,7 @@ extern "C" {
#define RX_BUFF_SIZE 0x100
#define TX_BUFF_SIZE 100
//uart int enalbe register ctrl bits
//uart int enable register ctrl bits
#define UART_RCV_INTEN BIT0
#define UART_TRX_INTEN BIT1
#define UART_LINE_STATUS_INTEN BIT2
@ -301,14 +301,14 @@ char uart_rx_one_char_block(void);
*
* @param uint8_t *pString : the pointer to store the string.
*
* @param uint8_t MaxStrlen : the max string length, incude '\0'.
* @param uint8_t MaxStrlen : the max string length, include '\0'.
*
* @return OK.
*/
STATUS UartRxString(uint8_t *pString, uint8_t MaxStrlen);
/**
* @brief Process uart recevied information in the interrupt handler.
* @brief Process uart received information in the interrupt handler.
* Please do not call this function in SDK.
*
* @param void *para : the message receive buffer.